summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/8250/8250_port.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/8250/8250_port.c')
-rw-r--r--drivers/tty/serial/8250/8250_port.c29
1 files changed, 5 insertions, 24 deletions
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index f776b3eafb96..3f779d25ec0c 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -552,30 +552,11 @@ static unsigned int serial_icr_read(struct uart_8250_port *up, int offset)
*/
static void serial8250_clear_fifos(struct uart_8250_port *p)
{
- unsigned char fcr;
- unsigned char clr_mask = UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT;
-
if (p->capabilities & UART_CAP_FIFO) {
- /*
- * Make sure to avoid changing FCR[7:3] and ENABLE_FIFO bits.
- * In case ENABLE_FIFO is not set, there is nothing to flush
- * so just return. Furthermore, on certain implementations of
- * the 8250 core, the FCR[7:3] bits may only be changed under
- * specific conditions and changing them if those conditions
- * are not met can have nasty side effects. One such core is
- * the 8250-omap present in TI AM335x.
- */
- fcr = serial_in(p, UART_FCR);
-
- /* FIFO is not enabled, there's nothing to clear. */
- if (!(fcr & UART_FCR_ENABLE_FIFO))
- return;
-
- fcr |= clr_mask;
- serial_out(p, UART_FCR, fcr);
-
- fcr &= ~clr_mask;
- serial_out(p, UART_FCR, fcr);
+ serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_out(p, UART_FCR, 0);
}
}
@@ -1467,7 +1448,7 @@ static void __do_stop_tx_rs485(struct uart_8250_port *p)
* Enable previously disabled RX interrupts.
*/
if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX)) {
- serial8250_clear_fifos(p);
+ serial8250_clear_and_reinit_fifos(p);
p->ier |= UART_IER_RLSI | UART_IER_RDI;
serial_port_out(&p->port, UART_IER, p->ier);