summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/m32r_sio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/m32r_sio.c')
-rw-r--r--drivers/tty/serial/m32r_sio.c1053
1 files changed, 0 insertions, 1053 deletions
diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c
deleted file mode 100644
index 7b83a8aab495..000000000000
--- a/drivers/tty/serial/m32r_sio.c
+++ /dev/null
@@ -1,1053 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * m32r_sio.c
- *
- * Driver for M32R serial ports
- *
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- * Based on drivers/serial/8250.c.
- *
- * Copyright (C) 2001 Russell King.
- * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
- */
-
-/*
- * A note about mapbase / membase
- *
- * mapbase is the physical address of the IO port. Currently, we don't
- * support this very well, and it may well be dropped from this driver
- * in future. As such, mapbase should be NULL.
- *
- * membase is an 'ioremapped' cookie. This is compatible with the old
- * serial.c driver, and is currently the preferred form.
- */
-
-#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/serial.h>
-#include <linux/delay.h>
-
-#include <asm/m32r.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#define BAUD_RATE 115200
-
-#include <linux/serial_core.h>
-#include "m32r_sio_reg.h"
-
-#define PASS_LIMIT 256
-
-static const struct {
- unsigned int port;
- unsigned int irq;
-} old_serial_port[] = {
-#if defined(CONFIG_PLAT_USRV)
- /* PORT IRQ FLAGS */
- { 0x3F8, PLD_IRQ_UART0 }, /* ttyS0 */
- { 0x2F8, PLD_IRQ_UART1 }, /* ttyS1 */
-#elif defined(CONFIG_SERIAL_M32R_PLDSIO)
- { ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV }, /* ttyS0 */
-#else
- { M32R_SIO_OFFSET, M32R_IRQ_SIO0_R }, /* ttyS0 */
-#endif
-};
-
-#define UART_NR ARRAY_SIZE(old_serial_port)
-
-struct uart_sio_port {
- struct uart_port port;
- struct timer_list timer; /* "no irq" timer */
- struct list_head list; /* ports on this IRQ */
- unsigned char ier;
-};
-
-struct irq_info {
- spinlock_t lock;
- struct list_head *head;
-};
-
-static struct irq_info irq_lists[NR_IRQS];
-
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-
-#define __sio_in(x) inw((unsigned long)(x))
-#define __sio_out(v,x) outw((v),(unsigned long)(x))
-
-static inline void sio_set_baud_rate(unsigned long baud)
-{
- unsigned short sbaud;
- sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1;
- __sio_out(sbaud, PLD_ESIO0BAUR);
-}
-
-static void sio_reset(void)
-{
- unsigned short tmp;
-
- tmp = __sio_in(PLD_ESIO0RXB);
- tmp = __sio_in(PLD_ESIO0RXB);
- tmp = __sio_in(PLD_ESIO0CR);
- sio_set_baud_rate(BAUD_RATE);
- __sio_out(0x0300, PLD_ESIO0CR);
- __sio_out(0x0003, PLD_ESIO0CR);
-}
-
-static void sio_init(void)
-{
- unsigned short tmp;
-
- tmp = __sio_in(PLD_ESIO0RXB);
- tmp = __sio_in(PLD_ESIO0RXB);
- tmp = __sio_in(PLD_ESIO0CR);
- __sio_out(0x0300, PLD_ESIO0CR);
- __sio_out(0x0003, PLD_ESIO0CR);
-}
-
-static void sio_error(int *status)
-{
- printk("SIO0 error[%04x]\n", *status);
- do {
- sio_init();
- } while ((*status = __sio_in(PLD_ESIO0CR)) != 3);
-}
-
-#else /* not CONFIG_SERIAL_M32R_PLDSIO */
-
-#define __sio_in(x) inl(x)
-#define __sio_out(v,x) outl((v),(x))
-
-static inline void sio_set_baud_rate(unsigned long baud)
-{
- unsigned long i, j;
-
- i = boot_cpu_data.bus_clock / (baud * 16);
- j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud;
- i -= 1;
- j = (j + 1) >> 1;
-
- __sio_out(i, M32R_SIO0_BAUR_PORTL);
- __sio_out(j, M32R_SIO0_RBAUR_PORTL);
-}
-
-static void sio_reset(void)
-{
- __sio_out(0x00000300, M32R_SIO0_CR_PORTL); /* init status */
- __sio_out(0x00000800, M32R_SIO0_MOD1_PORTL); /* 8bit */
- __sio_out(0x00000080, M32R_SIO0_MOD0_PORTL); /* 1stop non */
- sio_set_baud_rate(BAUD_RATE);
- __sio_out(0x00000000, M32R_SIO0_TRCR_PORTL);
- __sio_out(0x00000003, M32R_SIO0_CR_PORTL); /* RXCEN */
-}
-
-static void sio_init(void)
-{
- unsigned int tmp;
-
- tmp = __sio_in(M32R_SIO0_RXB_PORTL);
- tmp = __sio_in(M32R_SIO0_RXB_PORTL);
- tmp = __sio_in(M32R_SIO0_STS_PORTL);
- __sio_out(0x00000003, M32R_SIO0_CR_PORTL);
-}
-
-static void sio_error(int *status)
-{
- printk("SIO0 error[%04x]\n", *status);
- do {
- sio_init();
- } while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3);
-}
-
-#endif /* CONFIG_SERIAL_M32R_PLDSIO */
-
-static unsigned int sio_in(struct uart_sio_port *up, int offset)
-{
- return __sio_in(up->port.iobase + offset);
-}
-
-static void sio_out(struct uart_sio_port *up, int offset, int value)
-{
- __sio_out(value, up->port.iobase + offset);
-}
-
-static unsigned int serial_in(struct uart_sio_port *up, int offset)
-{
- if (!offset)
- return 0;
-
- return __sio_in(offset);
-}
-
-static void serial_out(struct uart_sio_port *up, int offset, int value)
-{
- if (!offset)
- return;
-
- __sio_out(value, offset);
-}
-
-static void m32r_sio_stop_tx(struct uart_port *port)
-{
- struct uart_sio_port *up =
- container_of(port, struct uart_sio_port, port);
-
- if (up->ier & UART_IER_THRI) {
- up->ier &= ~UART_IER_THRI;
- serial_out(up, UART_IER, up->ier);
- }
-}
-
-static void m32r_sio_start_tx(struct uart_port *port)
-{
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
- struct uart_sio_port *up =
- container_of(port, struct uart_sio_port, port);
- struct circ_buf *xmit = &up->port.state->xmit;
-
- if (!(up->ier & UART_IER_THRI)) {
- up->ier |= UART_IER_THRI;
- serial_out(up, UART_IER, up->ier);
- if (!uart_circ_empty(xmit)) {
- serial_out(up, UART_TX, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- up->port.icount.tx++;
- }
- }
- while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY);
-#else
- struct uart_sio_port *up =
- container_of(port, struct uart_sio_port, port);
-
- if (!(up->ier & UART_IER_THRI)) {
- up->ier |= UART_IER_THRI;
- serial_out(up, UART_IER, up->ier);
- }
-#endif
-}
-
-static void m32r_sio_stop_rx(struct uart_port *port)
-{
- struct uart_sio_port *up =
- container_of(port, struct uart_sio_port, port);
-
- up->ier &= ~UART_IER_RLSI;
- up->port.read_status_mask &= ~UART_LSR_DR;
- serial_out(up, UART_IER, up->ier);
-}
-
-static void m32r_sio_enable_ms(struct uart_port *port)
-{
- struct uart_sio_port *up =
- container_of(port, struct uart_sio_port, port);
-
- up->ier |= UART_IER_MSI;
- serial_out(up, UART_IER, up->ier);
-}
-
-static void receive_chars(struct uart_sio_port *up, int *status)
-{
- struct tty_port *port = &up->port.state->port;
- unsigned char ch;
- unsigned char flag;
- int max_count = 256;
-
- do {
- ch = sio_in(up, SIORXB);
- flag = TTY_NORMAL;
- up->port.icount.rx++;
-
- if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
- UART_LSR_FE | UART_LSR_OE))) {
- /*
- * For statistics only
- */
- if (*status & UART_LSR_BI) {
- *status &= ~(UART_LSR_FE | UART_LSR_PE);
- up->port.icount.brk++;
- /*
- * We do the SysRQ and SAK checking
- * here because otherwise the break
- * may get masked by ignore_status_mask
- * or read_status_mask.
- */
- if (uart_handle_break(&up->port))
- goto ignore_char;
- } else if (*status & UART_LSR_PE)
- up->port.icount.parity++;
- else if (*status & UART_LSR_FE)
- up->port.icount.frame++;
- if (*status & UART_LSR_OE)
- up->port.icount.overrun++;
-
- /*
- * Mask off conditions which should be ingored.
- */
- *status &= up->port.read_status_mask;
-
- if (*status & UART_LSR_BI) {
- pr_debug("handling break....\n");
- flag = TTY_BREAK;
- } else if (*status & UART_LSR_PE)
- flag = TTY_PARITY;
- else if (*status & UART_LSR_FE)
- flag = TTY_FRAME;
- }
- if (uart_handle_sysrq_char(&up->port, ch))
- goto ignore_char;
- if ((*status & up->port.ignore_status_mask) == 0)
- tty_insert_flip_char(port, ch, flag);
-
- if (*status & UART_LSR_OE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
- tty_insert_flip_char(port, 0, TTY_OVERRUN);
- }
- ignore_char:
- *status = serial_in(up, UART_LSR);
- } while ((*status & UART_LSR_DR) && (max_count-- > 0));
-
- spin_unlock(&up->port.lock);
- tty_flip_buffer_push(port);
- spin_lock(&up->port.lock);
-}
-
-static void transmit_chars(struct uart_sio_port *up)
-{
- struct circ_buf *xmit = &up->port.state->xmit;
- int count;
-
- if (up->port.x_char) {
-#ifndef CONFIG_SERIAL_M32R_PLDSIO /* XXX */
- serial_out(up, UART_TX, up->port.x_char);
-#endif
- up->port.icount.tx++;
- up->port.x_char = 0;
- return;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
- m32r_sio_stop_tx(&up->port);
- return;
- }
-
- count = up->port.fifosize;
- do {
- serial_out(up, UART_TX, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- up->port.icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- while (!(serial_in(up, UART_LSR) & UART_LSR_THRE));
-
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&up->port);
-
- pr_debug("THRE...\n");
-
- if (uart_circ_empty(xmit))
- m32r_sio_stop_tx(&up->port);
-}
-
-/*
- * This handles the interrupt from one port.
- */
-static inline void m32r_sio_handle_port(struct uart_sio_port *up,
- unsigned int status)
-{
- pr_debug("status = %x...\n", status);
-
- if (status & 0x04)
- receive_chars(up, &status);
- if (status & 0x01)
- transmit_chars(up);
-}
-
-/*
- * This is the serial driver's interrupt routine.
- *
- * Arjan thinks the old way was overly complex, so it got simplified.
- * Alan disagrees, saying that need the complexity to handle the weird
- * nature of ISA shared interrupts. (This is a special exception.)
- *
- * In order to handle ISA shared interrupts properly, we need to check
- * that all ports have been serviced, and therefore the ISA interrupt
- * line has been de-asserted.
- *
- * This means we need to loop through all ports. checking that they
- * don't have an interrupt pending.
- */
-static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id)
-{
- struct irq_info *i = dev_id;
- struct list_head *l, *end = NULL;
- int pass_counter = 0;
-
- pr_debug("m32r_sio_interrupt(%d)...\n", irq);
-
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-// if (irq == PLD_IRQ_SIO0_SND)
-// irq = PLD_IRQ_SIO0_RCV;
-#else
- if (irq == M32R_IRQ_SIO0_S)
- irq = M32R_IRQ_SIO0_R;
-#endif
-
- spin_lock(&i->lock);
-
- l = i->head;
- do {
- struct uart_sio_port *up;
- unsigned int sts;
-
- up = list_entry(l, struct uart_sio_port, list);
-
- sts = sio_in(up, SIOSTS);
- if (sts & 0x5) {
- spin_lock(&up->port.lock);
- m32r_sio_handle_port(up, sts);
- spin_unlock(&up->port.lock);
-
- end = NULL;
- } else if (end == NULL)
- end = l;
-
- l = l->next;
-
- if (l == i->head && pass_counter++ > PASS_LIMIT) {
- if (sts & 0xe0)
- sio_error(&sts);
- break;
- }
- } while (l != end);
-
- spin_unlock(&i->lock);
-
- pr_debug("end.\n");
-
- return IRQ_HANDLED;
-}
-
-/*
- * To support ISA shared interrupts, we need to have one interrupt
- * handler that ensures that the IRQ line has been deasserted
- * before returning. Failing to do this will result in the IRQ
- * line being stuck active, and, since ISA irqs are edge triggered,
- * no more IRQs will be seen.
- */
-static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up)
-{
- spin_lock_irq(&i->lock);
-
- if (!list_empty(i->head)) {
- if (i->head == &up->list)
- i->head = i->head->next;
- list_del(&up->list);
- } else {
- BUG_ON(i->head != &up->list);
- i->head = NULL;
- }
-
- spin_unlock_irq(&i->lock);
-}
-
-static int serial_link_irq_chain(struct uart_sio_port *up)
-{
- struct irq_info *i = irq_lists + up->port.irq;
- int ret, irq_flags = 0;
-
- spin_lock_irq(&i->lock);
-
- if (i->head) {
- list_add(&up->list, i->head);
- spin_unlock_irq(&i->lock);
-
- ret = 0;
- } else {
- INIT_LIST_HEAD(&up->list);
- i->head = &up->list;
- spin_unlock_irq(&i->lock);
-
- ret = request_irq(up->port.irq, m32r_sio_interrupt,
- irq_flags, "SIO0-RX", i);
- ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt,
- irq_flags, "SIO0-TX", i);
- if (ret < 0)
- serial_do_unlink(i, up);
- }
-
- return ret;
-}
-
-static void serial_unlink_irq_chain(struct uart_sio_port *up)
-{
- struct irq_info *i = irq_lists + up->port.irq;
-
- BUG_ON(i->head == NULL);
-
- if (list_empty(i->head)) {
- free_irq(up->port.irq, i);
- free_irq(up->port.irq + 1, i);
- }
-
- serial_do_unlink(i, up);
-}
-
-/*
- * This function is used to handle ports that do not have an interrupt.
- */
-static void m32r_sio_timeout(struct timer_list *t)
-{
- struct uart_sio_port *up = from_timer(up, t, timer);
- unsigned int timeout;
- unsigned int sts;
-
- sts = sio_in(up, SIOSTS);
- if (sts & 0x5) {
- spin_lock(&up->port.lock);
- m32r_sio_handle_port(up, sts);
- spin_unlock(&up->port.lock);
- }
-
- timeout = up->port.timeout;
- timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
- mod_timer(&up->timer, jiffies + timeout);
-}
-
-static unsigned int m32r_sio_tx_empty(struct uart_port *port)
-{
- struct uart_sio_port *up =
- container_of(port, struct uart_sio_port, port);
- unsigned long flags;
- unsigned int ret;
-
- spin_lock_irqsave(&up->port.lock, flags);
- ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
- spin_unlock_irqrestore(&up->port.lock, flags);
-
- return ret;
-}
-
-static unsigned int m32r_sio_get_mctrl(struct uart_port *port)
-{
- return 0;
-}
-
-static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-
-}
-
-static void m32r_sio_break_ctl(struct uart_port *port, int break_state)
-{
-
-}
-
-static int m32r_sio_startup(struct uart_port *port)
-{
- struct uart_sio_port *up =
- container_of(port, struct uart_sio_port, port);
- int retval;
-
- sio_init();
-
- /*
- * If the "interrupt" for this port doesn't correspond with any
- * hardware interrupt, we use a timer-based system. The original
- * driver used to do this with IRQ0.
- */
- if (!up->port.irq) {
- unsigned int timeout = up->port.timeout;
-
- timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
-
- mod_timer(&up->timer, jiffies + timeout);
- } else {
- retval = serial_link_irq_chain(up);
- if (retval)
- return retval;
- }
-
- /*
- * Finally, enable interrupts. Note: Modem status interrupts
- * are set via set_termios(), which will be occurring imminently
- * anyway, so we don't enable them here.
- * - M32R_SIO: 0x0c
- * - M32R_PLDSIO: 0x04
- */
- up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
- sio_out(up, SIOTRCR, up->ier);
-
- /*
- * And clear the interrupt registers again for luck.
- */
- sio_reset();
-
- return 0;
-}
-
-static void m32r_sio_shutdown(struct uart_port *port)
-{
- struct uart_sio_port *up =
- container_of(port, struct uart_sio_port, port);
-
- /*
- * Disable interrupts from this port
- */
- up->ier = 0;
- sio_out(up, SIOTRCR, 0);
-
- /*
- * Disable break condition and FIFOs
- */
-
- sio_init();
-
- if (!up->port.irq)
- del_timer_sync(&up->timer);
- else
- serial_unlink_irq_chain(up);
-}
-
-static unsigned int m32r_sio_get_divisor(struct uart_port *port,
- unsigned int baud)
-{
- return uart_get_divisor(port, baud);
-}
-
-static void m32r_sio_set_termios(struct uart_port *port,
- struct ktermios *termios, struct ktermios *old)
-{
- struct uart_sio_port *up =
- container_of(port, struct uart_sio_port, port);
- unsigned char cval = 0;
- unsigned long flags;
- unsigned int baud, quot;
-
- switch (termios->c_cflag & CSIZE) {
- case CS5:
- cval = UART_LCR_WLEN5;
- break;
- case CS6:
- cval = UART_LCR_WLEN6;
- break;
- case CS7:
- cval = UART_LCR_WLEN7;
- break;
- default:
- case CS8:
- cval = UART_LCR_WLEN8;
- break;
- }
-
- if (termios->c_cflag & CSTOPB)
- cval |= UART_LCR_STOP;
- if (termios->c_cflag & PARENB)
- cval |= UART_LCR_PARITY;
- if (!(termios->c_cflag & PARODD))
- cval |= UART_LCR_EPAR;
-#ifdef CMSPAR
- if (termios->c_cflag & CMSPAR)
- cval |= UART_LCR_SPAR;
-#endif
-
- /*
- * Ask the core to calculate the divisor for us.
- */
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4);
-#else
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-#endif
- quot = m32r_sio_get_divisor(port, baud);
-
- /*
- * Ok, we're now changing the port state. Do it with
- * interrupts disabled.
- */
- spin_lock_irqsave(&up->port.lock, flags);
-
- sio_set_baud_rate(baud);
-
- /*
- * Update the per-port timeout.
- */
- uart_update_timeout(port, termios->c_cflag, baud);
-
- up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
- if (termios->c_iflag & INPCK)
- up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
- if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
- up->port.read_status_mask |= UART_LSR_BI;
-
- /*
- * Characteres to ignore
- */
- up->port.ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
- if (termios->c_iflag & IGNBRK) {
- up->port.ignore_status_mask |= UART_LSR_BI;
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns too (for real raw support).
- */
- if (termios->c_iflag & IGNPAR)
- up->port.ignore_status_mask |= UART_LSR_OE;
- }
-
- /*
- * ignore all characters if CREAD is not set
- */
- if ((termios->c_cflag & CREAD) == 0)
- up->port.ignore_status_mask |= UART_LSR_DR;
-
- /*
- * CTS flow control flag and modem status interrupts
- */
- up->ier &= ~UART_IER_MSI;
- if (UART_ENABLE_MS(&up->port, termios->c_cflag))
- up->ier |= UART_IER_MSI;
-
- serial_out(up, UART_IER, up->ier);
-
- spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
-/*
- * Resource handling. This is complicated by the fact that resources
- * depend on the port type. Maybe we should be claiming the standard
- * 8250 ports, and then trying to get other resources as necessary?
- */
-static int
-m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res)
-{
- unsigned int size = 8 << up->port.regshift;
-#ifndef CONFIG_SERIAL_M32R_PLDSIO
- unsigned long start;
-#endif
- int ret = 0;
-
- switch (up->port.iotype) {
- case UPIO_MEM:
- if (up->port.mapbase) {
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
- *res = request_mem_region(up->port.mapbase, size, "serial");
-#else
- start = up->port.mapbase;
- *res = request_mem_region(start, size, "serial");
-#endif
- if (!*res)
- ret = -EBUSY;
- }
- break;
-
- case UPIO_PORT:
- *res = request_region(up->port.iobase, size, "serial");
- if (!*res)
- ret = -EBUSY;
- break;
- }
- return ret;
-}
-
-static void m32r_sio_release_port(struct uart_port *port)
-{
- struct uart_sio_port *up =
- container_of(port, struct uart_sio_port, port);
- unsigned long start, offset = 0, size = 0;
-
- size <<= up->port.regshift;
-
- switch (up->port.iotype) {
- case UPIO_MEM:
- if (up->port.mapbase) {
- /*
- * Unmap the area.
- */
- iounmap(up->port.membase);
- up->port.membase = NULL;
-
- start = up->port.mapbase;
-
- if (size)
- release_mem_region(start + offset, size);
- release_mem_region(start, 8 << up->port.regshift);
- }
- break;
-
- case UPIO_PORT:
- start = up->port.iobase;
-
- if (size)
- release_region(start + offset, size);
- release_region(start + offset, 8 << up->port.regshift);
- break;
-
- default:
- break;
- }
-}
-
-static int m32r_sio_request_port(struct uart_port *port)
-{
- struct uart_sio_port *up =
- container_of(port, struct uart_sio_port, port);
- struct resource *res = NULL;
- int ret = 0;
-
- ret = m32r_sio_request_std_resource(up, &res);
-
- /*
- * If we have a mapbase, then request that as well.
- */
- if (ret == 0 && up->port.flags & UPF_IOREMAP) {
- int size = resource_size(res);
-
- up->port.membase = ioremap(up->port.mapbase, size);
- if (!up->port.membase)
- ret = -ENOMEM;
- }
-
- if (ret < 0) {
- if (res)
- release_resource(res);
- }
-
- return ret;
-}
-
-static void m32r_sio_config_port(struct uart_port *port, int unused)
-{
- struct uart_sio_port *up =
- container_of(port, struct uart_sio_port, port);
- unsigned long flags;
-
- spin_lock_irqsave(&up->port.lock, flags);
-
- up->port.fifosize = 1;
-
- spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
-static int
-m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
- if (ser->irq >= nr_irqs || ser->irq < 0 || ser->baud_base < 9600)
- return -EINVAL;
- return 0;
-}
-
-static const struct uart_ops m32r_sio_pops = {
- .tx_empty = m32r_sio_tx_empty,
- .set_mctrl = m32r_sio_set_mctrl,
- .get_mctrl = m32r_sio_get_mctrl,
- .stop_tx = m32r_sio_stop_tx,
- .start_tx = m32r_sio_start_tx,
- .stop_rx = m32r_sio_stop_rx,
- .enable_ms = m32r_sio_enable_ms,
- .break_ctl = m32r_sio_break_ctl,
- .startup = m32r_sio_startup,
- .shutdown = m32r_sio_shutdown,
- .set_termios = m32r_sio_set_termios,
- .release_port = m32r_sio_release_port,
- .request_port = m32r_sio_request_port,
- .config_port = m32r_sio_config_port,
- .verify_port = m32r_sio_verify_port,
-};
-
-static struct uart_sio_port m32r_sio_ports[UART_NR];
-
-static void __init m32r_sio_init_ports(void)
-{
- struct uart_sio_port *up;
- static int first = 1;
- int i;
-
- if (!first)
- return;
- first = 0;
-
- for (i = 0, up = m32r_sio_ports; i < UART_NR; i++, up++) {
- up->port.iobase = old_serial_port[i].port;
- up->port.irq = irq_canonicalize(old_serial_port[i].irq);
- up->port.uartclk = BAUD_RATE * 16;
- up->port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
- up->port.membase = 0;
- up->port.iotype = 0;
- up->port.regshift = 0;
- up->port.ops = &m32r_sio_pops;
- }
-}
-
-static void __init m32r_sio_register_ports(struct uart_driver *drv)
-{
- int i;
-
- m32r_sio_init_ports();
-
- for (i = 0; i < UART_NR; i++) {
- struct uart_sio_port *up = &m32r_sio_ports[i];
-
- up->port.line = i;
- up->port.ops = &m32r_sio_pops;
- timer_setup(&up->timer, m32r_sio_timeout, 0);
-
- uart_add_one_port(drv, &up->port);
- }
-}
-
-#ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE
-
-/*
- * Wait for transmitter & holding register to empty
- */
-static void wait_for_xmitr(struct uart_sio_port *up)
-{
- unsigned int status, tmout = 10000;
-
- /* Wait up to 10ms for the character(s) to be sent. */
- do {
- status = sio_in(up, SIOSTS);
-
- if (--tmout == 0)
- break;
- udelay(1);
- } while ((status & UART_EMPTY) != UART_EMPTY);
-
- /* Wait up to 1s for flow control if necessary */
- if (up->port.flags & UPF_CONS_FLOW) {
- tmout = 1000000;
- while (--tmout)
- udelay(1);
- }
-}
-
-static void m32r_sio_console_putchar(struct uart_port *port, int ch)
-{
- struct uart_sio_port *up =
- container_of(port, struct uart_sio_port, port);
-
- wait_for_xmitr(up);
- sio_out(up, SIOTXB, ch);
-}
-
-/*
- * Print a string to the serial port trying not to disturb
- * any possible real use of the port...
- *
- * The console_lock must be held when we get here.
- */
-static void m32r_sio_console_write(struct console *co, const char *s,
- unsigned int count)
-{
- struct uart_sio_port *up = &m32r_sio_ports[co->index];
- unsigned int ier;
-
- /*
- * First save the UER then disable the interrupts
- */
- ier = sio_in(up, SIOTRCR);
- sio_out(up, SIOTRCR, 0);
-
- uart_console_write(&up->port, s, count, m32r_sio_console_putchar);
-
- /*
- * Finally, wait for transmitter to become empty
- * and restore the IER
- */
- wait_for_xmitr(up);
- sio_out(up, SIOTRCR, ier);
-}
-
-static int __init m32r_sio_console_setup(struct console *co, char *options)
-{
- struct uart_port *port;
- int baud = 9600;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- /*
- * Check whether an invalid uart number has been specified, and
- * if so, search for the first available port that does have
- * console support.
- */
- if (co->index >= UART_NR)
- co->index = 0;
- port = &m32r_sio_ports[co->index].port;
-
- /*
- * Temporary fix.
- */
- spin_lock_init(&port->lock);
-
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver m32r_sio_reg;
-static struct console m32r_sio_console = {
- .name = "ttyS",
- .write = m32r_sio_console_write,
- .device = uart_console_device,
- .setup = m32r_sio_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &m32r_sio_reg,
-};
-
-static int __init m32r_sio_console_init(void)
-{
- sio_reset();
- sio_init();
- m32r_sio_init_ports();
- register_console(&m32r_sio_console);
- return 0;
-}
-console_initcall(m32r_sio_console_init);
-
-#define M32R_SIO_CONSOLE &m32r_sio_console
-#else
-#define M32R_SIO_CONSOLE NULL
-#endif
-
-static struct uart_driver m32r_sio_reg = {
- .owner = THIS_MODULE,
- .driver_name = "sio",
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = 64,
- .nr = UART_NR,
- .cons = M32R_SIO_CONSOLE,
-};
-
-static int __init m32r_sio_init(void)
-{
- int ret, i;
-
- printk(KERN_INFO "Serial: M32R SIO driver\n");
-
- for (i = 0; i < nr_irqs; i++)
- spin_lock_init(&irq_lists[i].lock);
-
- ret = uart_register_driver(&m32r_sio_reg);
- if (ret >= 0)
- m32r_sio_register_ports(&m32r_sio_reg);
-
- return ret;
-}
-device_initcall(m32r_sio_init);