summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/8250/8250.c52
-rw-r--r--drivers/tty/serial/8250/8250_pci.c21
-rw-r--r--drivers/tty/serial/8250/8250_pnp.c12
-rw-r--r--drivers/tty/serial/Kconfig4
-rw-r--r--drivers/tty/serial/bcm63xx_uart.c8
-rw-r--r--drivers/tty/serial/mpc52xx_uart.c2
-rw-r--r--drivers/tty/serial/of_serial.c6
-rw-r--r--drivers/tty/serial/vt8500_serial.c9
8 files changed, 83 insertions, 31 deletions
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 0efc815a4968..cf6a5383748a 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -301,7 +301,28 @@ static const struct serial8250_config uart_config[] = {
},
[PORT_8250_CIR] = {
.name = "CIR port"
- }
+ },
+ [PORT_ALTR_16550_F32] = {
+ .name = "Altera 16550 FIFO32",
+ .fifo_size = 32,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_ALTR_16550_F64] = {
+ .name = "Altera 16550 FIFO64",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_ALTR_16550_F128] = {
+ .name = "Altera 16550 FIFO128",
+ .fifo_size = 128,
+ .tx_loadsz = 128,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
};
/* Uart divisor latch read */
@@ -3396,3 +3417,32 @@ module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444);
MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
#endif
MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
+
+#ifndef MODULE
+/* This module was renamed to 8250_core in 3.7. Keep the old "8250" name
+ * working as well for the module options so we don't break people. We
+ * need to keep the names identical and the convenient macros will happily
+ * refuse to let us do that by failing the build with redefinition errors
+ * of global variables. So we stick them inside a dummy function to avoid
+ * those conflicts. The options still get parsed, and the redefined
+ * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive.
+ *
+ * This is hacky. I'm sorry.
+ */
+static void __used s8250_options(void)
+{
+#undef MODULE_PARAM_PREFIX
+#define MODULE_PARAM_PREFIX "8250."
+
+ module_param_cb(share_irqs, &param_ops_uint, &share_irqs, 0644);
+ module_param_cb(nr_uarts, &param_ops_uint, &nr_uarts, 0644);
+ module_param_cb(skip_txen_test, &param_ops_uint, &skip_txen_test, 0644);
+#ifdef CONFIG_SERIAL_8250_RSA
+ __module_param_call(MODULE_PARAM_PREFIX, probe_rsa,
+ &param_array_ops, .arr = &__param_arr_probe_rsa,
+ 0444, -1);
+#endif
+}
+#else
+MODULE_ALIAS("8250");
+#endif
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 791c5a77ec61..aa76825229dc 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1571,6 +1571,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
+#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588
/*
* Master list of serial port init/setup/exit quirks.
@@ -1852,15 +1853,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
},
{
.vendor = PCI_VENDOR_ID_PLX,
- .device = PCI_DEVICE_ID_PLX_9050,
- .subvendor = PCI_VENDOR_ID_PLX,
- .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
- .init = pci_plx9050_init,
- .setup = pci_default_setup,
- .exit = pci_plx9050_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_ROMULUS,
.subvendor = PCI_VENDOR_ID_PLX,
.subdevice = PCI_DEVICE_ID_PLX_ROMULUS,
@@ -3733,7 +3725,12 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_VENDOR_ID_PLX,
PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
- pbn_b0_4_115200 },
+ pbn_b2_4_115200 },
+ /* Unknown card - subdevice 0x1588 */
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_VENDOR_ID_PLX,
+ PCI_SUBDEVICE_ID_UNKNOWN_0x1588, 0, 0,
+ pbn_b2_8_115200 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_KEYSPAN,
PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
@@ -4791,6 +4788,10 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_VENDOR_ID_IBM, 0x0299,
0, 0, pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
+ 0x1000, 0x0012,
+ 0, 0, pbn_b0_bt_2_115200 },
+
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
0xA000, 0x1000,
0, 0, pbn_b0_1_115200 },
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 35d9ab95c5cb..b3455a970a1d 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -429,6 +429,7 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
struct uart_8250_port uart;
int ret, line, flags = dev_id->driver_data;
+ struct resource *res = NULL;
if (flags & UNKNOWN_DEV) {
ret = serial_pnp_guess_board(dev);
@@ -439,11 +440,12 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
memset(&uart, 0, sizeof(uart));
if (pnp_irq_valid(dev, 0))
uart.port.irq = pnp_irq(dev, 0);
- if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) {
- uart.port.iobase = pnp_port_start(dev, 2);
- uart.port.iotype = UPIO_PORT;
- } else if (pnp_port_valid(dev, 0)) {
- uart.port.iobase = pnp_port_start(dev, 0);
+ if ((flags & CIR_PORT) && pnp_port_valid(dev, 2))
+ res = pnp_get_resource(dev, IORESOURCE_IO, 2);
+ else if (pnp_port_valid(dev, 0))
+ res = pnp_get_resource(dev, IORESOURCE_IO, 0);
+ if (pnp_resource_enabled(res)) {
+ uart.port.iobase = res->start;
uart.port.iotype = UPIO_PORT;
} else if (pnp_mem_valid(dev, 0)) {
uart.port.mapbase = pnp_mem_start(dev, 0);
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index cf9210db9fa9..7e7006fd404e 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -211,14 +211,14 @@ config SERIAL_SAMSUNG
config SERIAL_SAMSUNG_UARTS_4
bool
depends on PLAT_SAMSUNG
- default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
+ default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
help
Internal node for the common case of 4 Samsung compatible UARTs
config SERIAL_SAMSUNG_UARTS
int
depends on PLAT_SAMSUNG
- default 6 if ARCH_S5P6450
+ default 6 if CPU_S5P6450
default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
default 3
help
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index 719594e5fc21..52a3ecd40421 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -235,7 +235,7 @@ static const char *bcm_uart_type(struct uart_port *port)
*/
static void bcm_uart_do_rx(struct uart_port *port)
{
- struct tty_port *port = &port->state->port;
+ struct tty_port *tty_port = &port->state->port;
unsigned int max_count;
/* limit number of char read in interrupt, should not be
@@ -260,7 +260,7 @@ static void bcm_uart_do_rx(struct uart_port *port)
bcm_uart_writel(port, val, UART_CTL_REG);
port->icount.overrun++;
- tty_insert_flip_char(port, 0, TTY_OVERRUN);
+ tty_insert_flip_char(tty_port, 0, TTY_OVERRUN);
}
if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
@@ -299,11 +299,11 @@ static void bcm_uart_do_rx(struct uart_port *port)
if ((cstat & port->ignore_status_mask) == 0)
- tty_insert_flip_char(port, c, flag);
+ tty_insert_flip_char(tty_port, c, flag);
} while (--max_count);
- tty_flip_buffer_push(port);
+ tty_flip_buffer_push(tty_port);
}
/*
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index c0e1fad51be7..018bad922554 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -550,7 +550,7 @@ static int mpc512x_psc_clock(struct uart_port *port, int enable)
return 0;
psc_num = (port->mapbase & 0xf00) >> 8;
- snprintf(clk_name, sizeof(clk_name), "psc%d_clk", psc_num);
+ snprintf(clk_name, sizeof(clk_name), "psc%d_mclk", psc_num);
psc_clk = clk_get(port->dev, clk_name);
if (IS_ERR(psc_clk)) {
dev_err(port->dev, "Failed to get PSC clock entry!\n");
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index d5874605682b..b025d5438275 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -241,6 +241,12 @@ static struct of_device_id of_platform_serial_table[] = {
{ .compatible = "ns16850", .data = (void *)PORT_16850, },
{ .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
{ .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, },
+ { .compatible = "altr,16550-FIFO32",
+ .data = (void *)PORT_ALTR_16550_F32, },
+ { .compatible = "altr,16550-FIFO64",
+ .data = (void *)PORT_ALTR_16550_F64, },
+ { .compatible = "altr,16550-FIFO128",
+ .data = (void *)PORT_ALTR_16550_F128, },
#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
{ .compatible = "ibm,qpace-nwp-serial",
.data = (void *)PORT_NWPSERIAL, },
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index a3f9dd5c9dff..705240e6c4ec 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -611,14 +611,7 @@ static int vt8500_serial_probe(struct platform_device *pdev)
vt8500_port->uart.dev = &pdev->dev;
vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
- vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
- if (!IS_ERR(vt8500_port->clk)) {
- vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
- } else {
- /* use the default of 24Mhz if not specified and warn */
- pr_warn("%s: serial clock source not specified\n", __func__);
- vt8500_port->uart.uartclk = 24000000;
- }
+ vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
snprintf(vt8500_port->name, sizeof(vt8500_port->name),
"VT8500 UART%d", pdev->id);