diff options
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/Kconfig | 14 | ||||
| -rw-r--r-- | drivers/tty/Makefile | 3 | ||||
| -rw-r--r-- | drivers/tty/n_tty.c | 7 | ||||
| -rw-r--r-- | drivers/tty/serial/Kconfig | 32 | ||||
| -rw-r--r-- | drivers/tty/serial/Makefile | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/liteuart.c | 404 | ||||
| -rw-r--r-- | drivers/tty/serial/mvebu-uart.c | 10 | ||||
| -rw-r--r-- | drivers/tty/serial/sifive.c | 1 | ||||
| -rw-r--r-- | drivers/tty/tty_io.c | 51 | ||||
| -rw-r--r-- | drivers/tty/ttynull.c | 18 |
10 files changed, 492 insertions, 49 deletions
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index 47a6e42f0d04..e15cd6b5bb99 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -401,6 +401,20 @@ config MIPS_EJTAG_FDC_KGDB_CHAN help FDC channel number to use for KGDB. +config NULL_TTY + tristate "NULL TTY driver" + help + Say Y here if you want a NULL TTY which simply discards messages. + + This is useful to allow userspace applications which expect a console + device to work without modifications even when no console is + available or desired. + + In order to use this driver, you should redirect the console to this + TTY, or boot the kernel with console=ttynull. + + If unsure, say N. + config TRACE_ROUTER tristate "Trace data router for MIPI P1149.7 cJTAG standard" depends on TRACE_SINK diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index 3c1c5a9240a7..b3ccae932660 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -2,7 +2,7 @@ obj-$(CONFIG_TTY) += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \ tty_buffer.o tty_port.o tty_mutex.o \ tty_ldsem.o tty_baudrate.o tty_jobctrl.o \ - n_null.o ttynull.o + n_null.o obj-$(CONFIG_LEGACY_PTYS) += pty.o obj-$(CONFIG_UNIX98_PTYS) += pty.o obj-$(CONFIG_AUDIT) += tty_audit.o @@ -25,6 +25,7 @@ obj-$(CONFIG_ISI) += isicom.o obj-$(CONFIG_MOXA_INTELLIO) += moxa.o obj-$(CONFIG_MOXA_SMARTIO) += mxser.o obj-$(CONFIG_NOZOMI) += nozomi.o +obj-$(CONFIG_NULL_TTY) += ttynull.o obj-$(CONFIG_ROCKETPORT) += rocket.o obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o obj-$(CONFIG_PPC_EPAPR_HV_BYTECHAN) += ehv_bytechan.o diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 319d68c8a5df..219e85756171 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -2081,9 +2081,6 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, return 0; } -extern ssize_t redirected_tty_write(struct file *, const char __user *, - size_t, loff_t *); - /** * job_control - check job control * @tty: tty @@ -2105,7 +2102,7 @@ static int job_control(struct tty_struct *tty, struct file *file) /* NOTE: not yet done after every sleep pending a thorough check of the logic of this change. -- jlc */ /* don't stop on /dev/console */ - if (file->f_op->write == redirected_tty_write) + if (file->f_op->write_iter == redirected_tty_write) return 0; return __tty_check_change(tty, SIGTTIN); @@ -2309,7 +2306,7 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, ssize_t retval = 0; /* Job control check -- must be done at start (POSIX.1 7.1.1.4). */ - if (L_TOSTOP(tty) && file->f_op->write != redirected_tty_write) { + if (L_TOSTOP(tty) && file->f_op->write_iter != redirected_tty_write) { retval = tty_check_change(tty); if (retval) return retval; diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 12d71d5eb6ca..34a2899e69c0 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1567,6 +1567,38 @@ config SERIAL_MILBEAUT_USIO_CONSOLE receives all kernel messages and warnings and which allows logins in single user mode). +config SERIAL_LITEUART + tristate "LiteUART serial port support" + depends on HAS_IOMEM + depends on OF || COMPILE_TEST + depends on LITEX + select SERIAL_CORE + help + This driver is for the FPGA-based LiteUART serial controller from LiteX + SoC builder. + + Say 'Y' or 'M' here if you wish to use the LiteUART serial controller. + Otherwise, say 'N'. + +config SERIAL_LITEUART_MAX_PORTS + int "Maximum number of LiteUART ports" + depends on SERIAL_LITEUART + default "1" + help + Set this to the maximum number of serial ports you want the driver + to support. + +config SERIAL_LITEUART_CONSOLE + bool "LiteUART serial port console support" + depends on SERIAL_LITEUART=y + select SERIAL_CORE_CONSOLE + help + Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial + controller from LiteX SoC builder as the system console + (the system console is the device which receives all kernel messages + and warnings and which allows logins in single user mode). + Otherwise, say 'N'. + endmenu config SERIAL_MCTRL_GPIO diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index af44b231123c..b85d53f9e9ff 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -89,6 +89,7 @@ obj-$(CONFIG_SERIAL_OWL) += owl-uart.o obj-$(CONFIG_SERIAL_RDA) += rda-uart.o obj-$(CONFIG_SERIAL_MILBEAUT_USIO) += milbeaut_usio.o obj-$(CONFIG_SERIAL_SIFIVE) += sifive.o +obj-$(CONFIG_SERIAL_LITEUART) += liteuart.o # GPIOLIB helpers for modem control lines obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c new file mode 100644 index 000000000000..64842f3539e1 --- /dev/null +++ b/drivers/tty/serial/liteuart.c @@ -0,0 +1,404 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * LiteUART serial controller (LiteX) Driver + * + * Copyright (C) 2019-2020 Antmicro <www.antmicro.com> + */ + +#include <linux/console.h> +#include <linux/litex.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/slab.h> +#include <linux/timer.h> +#include <linux/tty_flip.h> +#include <linux/xarray.h> + +/* + * CSRs definitions (base address offsets + width) + * + * The definitions below are true for LiteX SoC configured for 8-bit CSR Bus, + * 32-bit aligned. + * + * Supporting other configurations might require new definitions or a more + * generic way of indexing the LiteX CSRs. + * + * For more details on how CSRs are defined and handled in LiteX, see comments + * in the LiteX SoC Driver: drivers/soc/litex/litex_soc_ctrl.c + */ +#define OFF_RXTX 0x00 +#define OFF_TXFULL 0x04 +#define OFF_RXEMPTY 0x08 +#define OFF_EV_STATUS 0x0c +#define OFF_EV_PENDING 0x10 +#define OFF_EV_ENABLE 0x14 + +/* events */ +#define EV_TX 0x1 +#define EV_RX 0x2 + +struct liteuart_port { + struct uart_port port; + struct timer_list timer; + u32 id; +}; + +#define to_liteuart_port(port) container_of(port, struct liteuart_port, port) + +static DEFINE_XARRAY_FLAGS(liteuart_array, XA_FLAGS_ALLOC); + +#ifdef CONFIG_SERIAL_LITEUART_CONSOLE +static struct console liteuart_console; +#endif + +static struct uart_driver liteuart_driver = { + .owner = THIS_MODULE, + .driver_name = "liteuart", + .dev_name = "ttyLXU", + .major = 0, + .minor = 0, + .nr = CONFIG_SERIAL_LITEUART_MAX_PORTS, +#ifdef CONFIG_SERIAL_LITEUART_CONSOLE + .cons = &liteuart_console, +#endif +}; + +static void liteuart_timer(struct timer_list *t) +{ + struct liteuart_port *uart = from_timer(uart, t, timer); + struct uart_port *port = &uart->port; + unsigned char __iomem *membase = port->membase; + unsigned int flg = TTY_NORMAL; + int ch; + unsigned long status; + + while ((status = !litex_read8(membase + OFF_RXEMPTY)) == 1) { + ch = litex_read8(membase + OFF_RXTX); + port->icount.rx++; + + /* necessary for RXEMPTY to refresh its value */ + litex_write8(membase + OFF_EV_PENDING, EV_TX | EV_RX); + + /* no overflow bits in status */ + if (!(uart_handle_sysrq_char(port, ch))) + uart_insert_char(port, status, 0, ch, flg); + + tty_flip_buffer_push(&port->state->port); + } + + mod_timer(&uart->timer, jiffies + uart_poll_timeout(port)); +} + +static void liteuart_putchar(struct uart_port *port, int ch) +{ + while (litex_read8(port->membase + OFF_TXFULL)) + cpu_relax(); + + litex_write8(port->membase + OFF_RXTX, ch); +} + +static unsigned int liteuart_tx_empty(struct uart_port *port) +{ + /* not really tx empty, just checking if tx is not full */ + if (!litex_read8(port->membase + OFF_TXFULL)) + return TIOCSER_TEMT; + + return 0; +} + +static void liteuart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* modem control register is not present in LiteUART */ +} + +static unsigned int liteuart_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +} + +static void liteuart_stop_tx(struct uart_port *port) +{ +} + +static void liteuart_start_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned char ch; + + if (unlikely(port->x_char)) { + litex_write8(port->membase + OFF_RXTX, port->x_char); + port->icount.tx++; + port->x_char = 0; + } else if (!uart_circ_empty(xmit)) { + while (xmit->head != xmit->tail) { + ch = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + liteuart_putchar(port, ch); + } + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static void liteuart_stop_rx(struct uart_port *port) +{ + struct liteuart_port *uart = to_liteuart_port(port); + + /* just delete timer */ + del_timer(&uart->timer); +} + +static void liteuart_break_ctl(struct uart_port *port, int break_state) +{ + /* LiteUART doesn't support sending break signal */ +} + +static int liteuart_startup(struct uart_port *port) +{ + struct liteuart_port *uart = to_liteuart_port(port); + + /* disable events */ + litex_write8(port->membase + OFF_EV_ENABLE, 0); + + /* prepare timer for polling */ + timer_setup(&uart->timer, liteuart_timer, 0); + mod_timer(&uart->timer, jiffies + uart_poll_timeout(port)); + + return 0; +} + +static void liteuart_shutdown(struct uart_port *port) +{ +} + +static void liteuart_set_termios(struct uart_port *port, struct ktermios *new, + struct ktermios *old) +{ + unsigned int baud; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* update baudrate */ + baud = uart_get_baud_rate(port, new, old, 0, 460800); + uart_update_timeout(port, new->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *liteuart_type(struct uart_port *port) +{ + return "liteuart"; +} + +static void liteuart_release_port(struct uart_port *port) +{ +} + +static int liteuart_request_port(struct uart_port *port) +{ + return 0; +} + +static void liteuart_config_port(struct uart_port *port, int flags) +{ + /* + * Driver core for serial ports forces a non-zero value for port type. + * Write an arbitrary value here to accommodate the serial core driver, + * as ID part of UAPI is redundant. + */ + port->type = 1; +} + +static int liteuart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (port->type != PORT_UNKNOWN && ser->type != 1) + return -EINVAL; + + return 0; +} + +static const struct uart_ops liteuart_ops = { + .tx_empty = liteuart_tx_empty, + .set_mctrl = liteuart_set_mctrl, + .get_mctrl = liteuart_get_mctrl, + .stop_tx = liteuart_stop_tx, + .start_tx = liteuart_start_tx, + .stop_rx = liteuart_stop_rx, + .break_ctl = liteuart_break_ctl, + .startup = liteuart_startup, + .shutdown = liteuart_shutdown, + .set_termios = liteuart_set_termios, + .type = liteuart_type, + .release_port = liteuart_release_port, + .request_port = liteuart_request_port, + .config_port = liteuart_config_port, + .verify_port = liteuart_verify_port, +}; + +static int liteuart_probe(struct platform_device *pdev) +{ + struct liteuart_port *uart; + struct uart_port *port; + struct xa_limit limit; + int dev_id, ret; + + /* look for aliases; auto-enumerate for free index if not found */ + dev_id = of_alias_get_id(pdev->dev.of_node, "serial"); + if (dev_id < 0) + limit = XA_LIMIT(0, CONFIG_SERIAL_LITEUART_MAX_PORTS); + else + limit = XA_LIMIT(dev_id, dev_id); + + uart = devm_kzalloc(&pdev->dev, sizeof(struct liteuart_port), GFP_KERNEL); + if (!uart) + return -ENOMEM; + + ret = xa_alloc(&liteuart_array, &dev_id, uart, limit, GFP_KERNEL); + if (ret) + return ret; + + uart->id = dev_id; + port = &uart->port; + + /* get membase */ + port->membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); + if (!port->membase) + return -ENXIO; + + /* values not from device tree */ + port->dev = &pdev->dev; + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF; + port->ops = &liteuart_ops; + port->regshift = 2; + port->fifosize = 16; + port->iobase = 1; + port->type = PORT_UNKNOWN; + port->line = dev_id; + spin_lock_init(&port->lock); + + return uart_add_one_port(&liteuart_driver, &uart->port); +} + +static int liteuart_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + struct liteuart_port *uart = to_liteuart_port(port); + + xa_erase(&liteuart_array, uart->id); + + return 0; +} + +static const struct of_device_id liteuart_of_match[] = { + { .compatible = "litex,liteuart" }, + {} +}; +MODULE_DEVICE_TABLE(of, liteuart_of_match); + +static struct platform_driver liteuart_platform_driver = { + .probe = liteuart_probe, + .remove = liteuart_remove, + .driver = { + .name = "liteuart", + .of_match_table = liteuart_of_match, + }, +}; + +#ifdef CONFIG_SERIAL_LITEUART_CONSOLE + +static void liteuart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct liteuart_port *uart; + struct uart_port *port; + unsigned long flags; + + uart = (struct liteuart_port *)xa_load(&liteuart_array, co->index); + port = &uart->port; + + spin_lock_irqsave(&port->lock, flags); + uart_console_write(port, s, count, liteuart_putchar); + spin_unlock_irqrestore(&port->lock, flags); +} + +static int liteuart_console_setup(struct console *co, char *options) +{ + struct liteuart_port *uart; + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + uart = (struct liteuart_port *)xa_load(&liteuart_array, co->index); + if (!uart) + return -ENODEV; + + port = &uart->port; + if (!port->membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct console liteuart_console = { + .name = "liteuart", + .write = liteuart_console_write, + .device = uart_console_device, + .setup = liteuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &liteuart_driver, +}; + +static int __init liteuart_console_init(void) +{ + register_console(&liteuart_console); + + return 0; +} +console_initcall(liteuart_console_init); +#endif /* CONFIG_SERIAL_LITEUART_CONSOLE */ + +static int __init liteuart_init(void) +{ + int res; + + res = uart_register_driver(&liteuart_driver); + if (res) + return res; + + res = platform_driver_register(&liteuart_platform_driver); + if (res) { + uart_unregister_driver(&liteuart_driver); + return res; + } + + return 0; +} + +static void __exit liteuart_exit(void) +{ + platform_driver_unregister(&liteuart_platform_driver); + uart_unregister_driver(&liteuart_driver); +} + +module_init(liteuart_init); +module_exit(liteuart_exit); + +MODULE_AUTHOR("Antmicro <www.antmicro.com>"); +MODULE_DESCRIPTION("LiteUART serial driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform: liteuart"); diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c index 118b29912289..e0c00a1b0763 100644 --- a/drivers/tty/serial/mvebu-uart.c +++ b/drivers/tty/serial/mvebu-uart.c @@ -648,6 +648,14 @@ static void wait_for_xmitr(struct uart_port *port) (val & STAT_TX_RDY(port)), 1, 10000); } +static void wait_for_xmite(struct uart_port *port) +{ + u32 val; + + readl_poll_timeout_atomic(port->membase + UART_STAT, val, + (val & STAT_TX_EMP), 1, 10000); +} + static void mvebu_uart_console_putchar(struct uart_port *port, int ch) { wait_for_xmitr(port); @@ -675,7 +683,7 @@ static void mvebu_uart_console_write(struct console *co, const char *s, uart_console_write(port, s, count, mvebu_uart_console_putchar); - wait_for_xmitr(port); + wait_for_xmite(port); if (ier) writel(ier, port->membase + UART_CTRL(port)); diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c index 1066eebe3b28..328d5a78792f 100644 --- a/drivers/tty/serial/sifive.c +++ b/drivers/tty/serial/sifive.c @@ -1000,6 +1000,7 @@ static int sifive_serial_probe(struct platform_device *pdev) /* Set up clock divider */ ssp->clkin_rate = clk_get_rate(ssp->clk); ssp->baud_rate = SIFIVE_DEFAULT_BAUD_RATE; + ssp->port.uartclk = ssp->baud_rate * 16; __ssp_update_div(ssp); platform_set_drvdata(pdev, ssp); diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 8034489337d7..48de20916ca7 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -143,12 +143,9 @@ LIST_HEAD(tty_drivers); /* linked list of tty drivers */ DEFINE_MUTEX(tty_mutex); static ssize_t tty_read(struct file *, char __user *, size_t, loff_t *); -static ssize_t tty_write(struct file *, const char __user *, size_t, loff_t *); -ssize_t redirected_tty_write(struct file *, const char __user *, - size_t, loff_t *); +static ssize_t tty_write(struct kiocb *, struct iov_iter *); static __poll_t tty_poll(struct file *, poll_table *); static int tty_open(struct inode *, struct file *); -long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg); #ifdef CONFIG_COMPAT static long tty_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg); @@ -438,8 +435,7 @@ static ssize_t hung_up_tty_read(struct file *file, char __user *buf, return 0; } -static ssize_t hung_up_tty_write(struct file *file, const char __user *buf, - size_t count, loff_t *ppos) +static ssize_t hung_up_tty_write(struct kiocb *iocb, struct iov_iter *from) { return -EIO; } @@ -478,7 +474,8 @@ static void tty_show_fdinfo(struct seq_file *m, struct file *file) static const struct file_operations tty_fops = { .llseek = no_llseek, .read = tty_read, - .write = tty_write, + .write_iter = tty_write, + .splice_write = iter_file_splice_write, .poll = tty_poll, .unlocked_ioctl = tty_ioctl, .compat_ioctl = tty_compat_ioctl, @@ -491,7 +488,8 @@ static const struct file_operations tty_fops = { static const struct file_operations console_fops = { .llseek = no_llseek, .read = tty_read, - .write = redirected_tty_write, + .write_iter = redirected_tty_write, + .splice_write = iter_file_splice_write, .poll = tty_poll, .unlocked_ioctl = tty_ioctl, .compat_ioctl = tty_compat_ioctl, @@ -503,7 +501,7 @@ static const struct file_operations console_fops = { static const struct file_operations hung_up_tty_fops = { .llseek = no_llseek, .read = hung_up_tty_read, - .write = hung_up_tty_write, + .write_iter = hung_up_tty_write, .poll = hung_up_tty_poll, .unlocked_ioctl = hung_up_tty_ioctl, .compat_ioctl = hung_up_tty_compat_ioctl, @@ -606,9 +604,9 @@ static void __tty_hangup(struct tty_struct *tty, int exit_session) /* This breaks for file handles being sent over AF_UNIX sockets ? */ list_for_each_entry(priv, &tty->tty_files, list) { filp = priv->file; - if (filp->f_op->write == redirected_tty_write) + if (filp->f_op->write_iter == redirected_tty_write) cons_filp = filp; - if (filp->f_op->write != tty_write) + if (filp->f_op->write_iter != tty_write) continue; closecount++; __tty_fasync(-1, filp, 0); /* can't block */ @@ -901,9 +899,9 @@ static inline ssize_t do_tty_write( ssize_t (*write)(struct tty_struct *, struct file *, const unsigned char *, size_t), struct tty_struct *tty, struct file *file, - const char __user *buf, - size_t count) + struct iov_iter *from) { + size_t count = iov_iter_count(from); ssize_t ret, written = 0; unsigned int chunk; @@ -955,14 +953,20 @@ static inline ssize_t do_tty_write( size_t size = count; if (size > chunk) size = chunk; + ret = -EFAULT; - if (copy_from_user(tty->write_buf, buf, size)) + if (copy_from_iter(tty->write_buf, size, from) != size) break; + ret = write(tty, file, tty->write_buf, size); if (ret <= 0) break; + + /* FIXME! Have Al check this! */ + if (ret != size) + iov_iter_revert(from, size-ret); + written += ret; - buf += ret; count -= ret; if (!count) break; @@ -1022,9 +1026,9 @@ void tty_write_message(struct tty_struct *tty, char *msg) * write method will not be invoked in parallel for each device. */ -static ssize_t tty_write(struct file *file, const char __user *buf, - size_t count, loff_t *ppos) +static ssize_t tty_write(struct kiocb *iocb, struct iov_iter *from) { + struct file *file = iocb->ki_filp; struct tty_struct *tty = file_tty(file); struct tty_ldisc *ld; ssize_t ret; @@ -1038,17 +1042,16 @@ static ssize_t tty_write(struct file *file, const char __user *buf, tty_err(tty, "missing write_room method\n"); ld = tty_ldisc_ref_wait(tty); if (!ld) - return hung_up_tty_write(file, buf, count, ppos); + return hung_up_tty_write(iocb, from); if (!ld->ops->write) ret = -EIO; else - ret = do_tty_write(ld->ops->write, tty, file, buf, count); + ret = do_tty_write(ld->ops->write, tty, file, from); tty_ldisc_deref(ld); return ret; } -ssize_t redirected_tty_write(struct file *file, const char __user *buf, - size_t count, loff_t *ppos) +ssize_t redirected_tty_write(struct kiocb *iocb, struct iov_iter *iter) { struct file *p = NULL; @@ -1059,11 +1062,11 @@ ssize_t redirected_tty_write(struct file *file, const char __user *buf, if (p) { ssize_t res; - res = vfs_write(p, buf, count, &p->f_pos); + res = vfs_iocb_iter_write(p, iocb, iter); fput(p); return res; } - return tty_write(file, buf, count, ppos); + return tty_write(iocb, iter); } /* @@ -2295,7 +2298,7 @@ static int tioccons(struct file *file) { if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (file->f_op->write == redirected_tty_write) { + if (file->f_op->write_iter == redirected_tty_write) { struct file *f; spin_lock(&redirect_lock); f = redirect; diff --git a/drivers/tty/ttynull.c b/drivers/tty/ttynull.c index eced70ec54e1..17f05b7eb6d3 100644 --- a/drivers/tty/ttynull.c +++ b/drivers/tty/ttynull.c @@ -2,13 +2,6 @@ /* * Copyright (C) 2019 Axis Communications AB * - * The console is useful for userspace applications which expect a console - * device to work without modifications even when no console is available - * or desired. - * - * In order to use this driver, you should redirect the console to this - * TTY, or boot the kernel with console=ttynull. - * * Based on ttyprintk.c: * Copyright (C) 2010 Samo Pogacnik */ @@ -66,17 +59,6 @@ static struct console ttynull_console = { .device = ttynull_device, }; -void __init register_ttynull_console(void) -{ - if (!ttynull_driver) - return; - - if (add_preferred_console(ttynull_console.name, 0, NULL)) - return; - - register_console(&ttynull_console); -} - static int __init ttynull_init(void) { struct tty_driver *driver; |