diff options
Diffstat (limited to 'drivers/usb/core')
| -rw-r--r-- | drivers/usb/core/hub.c | 47 | ||||
| -rw-r--r-- | drivers/usb/core/quirks.c | 10 |
2 files changed, 55 insertions, 2 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index c3f839637cb5..dcba4281ea48 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1849,6 +1849,17 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) hdev = interface_to_usbdev(intf); /* + * The USB 2.0 spec prohibits hubs from having more than one + * configuration or interface, and we rely on this prohibition. + * Refuse to accept a device that violates it. + */ + if (hdev->descriptor.bNumConfigurations > 1 || + hdev->actconfig->desc.bNumInterfaces > 1) { + dev_err(&intf->dev, "Invalid hub with more than one config or interface\n"); + return -EINVAL; + } + + /* * Set default autosuspend delay as 0 to speedup bus suspend, * based on the below considerations: * @@ -4698,7 +4709,6 @@ void usb_ep0_reinit(struct usb_device *udev) EXPORT_SYMBOL_GPL(usb_ep0_reinit); #define usb_sndaddr0pipe() (PIPE_CONTROL << 30) -#define usb_rcvaddr0pipe() ((PIPE_CONTROL << 30) | USB_DIR_IN) static int hub_set_address(struct usb_device *udev, int devnum) { @@ -4804,7 +4814,7 @@ static int get_bMaxPacketSize0(struct usb_device *udev, for (i = 0; i < GET_MAXPACKET0_TRIES; ++i) { /* Start with invalid values in case the transfer fails */ buf->bDescriptorType = buf->bMaxPacketSize0 = 0; - rc = usb_control_msg(udev, usb_rcvaddr0pipe(), + rc = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, USB_DT_DEVICE << 8, 0, buf, size, @@ -6056,6 +6066,36 @@ void usb_hub_cleanup(void) } /* usb_hub_cleanup() */ /** + * hub_hc_release_resources - clear resources used by host controller + * @udev: pointer to device being released + * + * Context: task context, might sleep + * + * Function releases the host controller resources in correct order before + * making any operation on resuming usb device. The host controller resources + * allocated for devices in tree should be released starting from the last + * usb device in tree toward the root hub. This function is used only during + * resuming device when usb device require reinitialization – that is, when + * flag udev->reset_resume is set. + * + * This call is synchronous, and may not be used in an interrupt context. + */ +static void hub_hc_release_resources(struct usb_device *udev) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(udev); + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + int i; + + /* Release up resources for all children before this device */ + for (i = 0; i < udev->maxchild; i++) + if (hub->ports[i]->child) + hub_hc_release_resources(hub->ports[i]->child); + + if (hcd->driver->reset_device) + hcd->driver->reset_device(hcd, udev); +} + +/** * usb_reset_and_verify_device - perform a USB port reset to reinitialize a device * @udev: device to reset (not in SUSPENDED or NOTATTACHED state) * @@ -6119,6 +6159,9 @@ static int usb_reset_and_verify_device(struct usb_device *udev) bos = udev->bos; udev->bos = NULL; + if (udev->reset_resume) + hub_hc_release_resources(udev); + mutex_lock(hcd->address0_mutex); for (i = 0; i < PORT_INIT_TRIES; ++i) { diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 67732c791c93..8efbacc5bc34 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -341,6 +341,10 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0638, 0x0a13), .driver_info = USB_QUIRK_STRING_FETCH_255 }, + /* Prolific Single-LUN Mass Storage Card Reader */ + { USB_DEVICE(0x067b, 0x2731), .driver_info = USB_QUIRK_DELAY_INIT | + USB_QUIRK_NO_LPM }, + /* Saitek Cyborg Gold Joystick */ { USB_DEVICE(0x06a3, 0x0006), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, @@ -435,6 +439,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0c45, 0x7056), .driver_info = USB_QUIRK_IGNORE_REMOTE_WAKEUP }, + /* Sony Xperia XZ1 Compact (lilac) smartphone in fastboot mode */ + { USB_DEVICE(0x0fce, 0x0dde), .driver_info = USB_QUIRK_NO_LPM }, + /* Action Semiconductor flash disk */ { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255 }, @@ -525,6 +532,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Blackmagic Design UltraStudio SDI */ { USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM }, + /* Teclast disk */ + { USB_DEVICE(0x1f75, 0x0917), .driver_info = USB_QUIRK_NO_LPM }, + /* Hauppauge HVR-950q */ { USB_DEVICE(0x2040, 0x7200), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, |