summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget/pxa25x_udc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget/pxa25x_udc.c')
-rw-r--r--drivers/usb/gadget/pxa25x_udc.c49
1 files changed, 45 insertions, 4 deletions
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index ed21e263f832..e6fedbd5a654 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -56,6 +56,7 @@
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
/*
* This driver is PXA25x only. Grab the right register definitions.
@@ -1008,15 +1009,27 @@ static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active)
return 0;
}
+/* boards may consume current from VBUS, up to 100-500mA based on config.
+ * the 500uA suspend ceiling means that exclusively vbus-powered PXA designs
+ * violate USB specs.
+ */
+static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
+{
+ struct pxa25x_udc *udc;
+
+ udc = container_of(_gadget, struct pxa25x_udc, gadget);
+
+ if (udc->transceiver)
+ return otg_set_power(udc->transceiver, mA);
+ return -EOPNOTSUPP;
+}
+
static const struct usb_gadget_ops pxa25x_udc_ops = {
.get_frame = pxa25x_udc_get_frame,
.wakeup = pxa25x_udc_wakeup,
.vbus_session = pxa25x_udc_vbus_session,
.pullup = pxa25x_udc_pullup,
-
- // .vbus_draw ... boards may consume current from VBUS, up to
- // 100-500mA based on config. the 500uA suspend ceiling means
- // that exclusively vbus-powered PXA designs violate USB specs.
+ .vbus_draw = pxa25x_udc_vbus_draw,
};
/*-------------------------------------------------------------------------*/
@@ -1303,9 +1316,23 @@ fail:
* for set_configuration as well as eventual disconnect.
*/
DMSG("registered gadget driver '%s'\n", driver->driver.name);
+
+ /* connect to bus through transceiver */
+ if (dev->transceiver) {
+ retval = otg_set_peripheral(dev->transceiver, &dev->gadget);
+ if (retval) {
+ DMSG("can't bind to transceiver\n");
+ if (driver->unbind)
+ driver->unbind(&dev->gadget);
+ goto bind_fail;
+ }
+ }
+
pullup(dev);
dump_state(dev);
return 0;
+bind_fail:
+ return retval;
}
EXPORT_SYMBOL(usb_gadget_register_driver);
@@ -1351,6 +1378,9 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
stop_activity(dev, driver);
local_irq_enable();
+ if (dev->transceiver)
+ (void) otg_set_peripheral(dev->transceiver, NULL);
+
driver->unbind(&dev->gadget);
dev->gadget.dev.driver = NULL;
dev->driver = NULL;
@@ -2162,6 +2192,8 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
dev->dev = &pdev->dev;
dev->mach = pdev->dev.platform_data;
+ dev->transceiver = otg_get_transceiver();
+
if (gpio_is_valid(dev->mach->gpio_vbus)) {
if ((retval = gpio_request(dev->mach->gpio_vbus,
"pxa25x_udc GPIO VBUS"))) {
@@ -2264,6 +2296,10 @@ lubbock_fail0:
if (gpio_is_valid(dev->mach->gpio_vbus))
gpio_free(dev->mach->gpio_vbus);
err_gpio_vbus:
+ if (dev->transceiver) {
+ otg_put_transceiver(dev->transceiver);
+ dev->transceiver = NULL;
+ }
clk_put(dev->clk);
err_clk:
return retval;
@@ -2305,6 +2341,11 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
clk_put(dev->clk);
+ if (dev->transceiver) {
+ otg_put_transceiver(dev->transceiver);
+ dev->transceiver = NULL;
+ }
+
platform_set_drvdata(pdev, NULL);
the_controller = NULL;
return 0;