summaryrefslogtreecommitdiff
path: root/drivers/usb/host/xhci-ring.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci-ring.c')
-rw-r--r--drivers/usb/host/xhci-ring.c50
1 files changed, 42 insertions, 8 deletions
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index a78787bb5133..2c255d0620b0 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -547,6 +547,23 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
stream_id);
return;
}
+ /*
+ * A cancelled TD can complete with a stall if HW cached the trb.
+ * In this case driver can't find cur_td, but if the ring is empty we
+ * can move the dequeue pointer to the current enqueue position.
+ */
+ if (!cur_td) {
+ if (list_empty(&ep_ring->td_list)) {
+ state->new_deq_seg = ep_ring->enq_seg;
+ state->new_deq_ptr = ep_ring->enqueue;
+ state->new_cycle_state = ep_ring->cycle_state;
+ goto done;
+ } else {
+ xhci_warn(xhci, "Can't find new dequeue state, missing cur_td\n");
+ return;
+ }
+ }
+
/* Dig out the cycle state saved by the xHC during the stop ep cmd */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Finding endpoint context");
@@ -592,6 +609,7 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
state->new_deq_seg = new_seg;
state->new_deq_ptr = new_deq;
+done:
/* Don't update the ring cycle state for the producer (us). */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Cycle state = 0x%x", state->new_cycle_state);
@@ -1856,8 +1874,8 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
if (reset_type == EP_HARD_RESET) {
ep->ep_state |= EP_HARD_CLEAR_TOGGLE;
- xhci_cleanup_stalled_ring(xhci, ep_index, stream_id, td);
- xhci_clear_hub_tt_buffer(xhci, td, ep);
+ xhci_cleanup_stalled_ring(xhci, slot_id, ep_index, stream_id,
+ td);
}
xhci_ring_cmd_db(xhci);
}
@@ -1978,11 +1996,18 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
if (trb_comp_code == COMP_STALL_ERROR ||
xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
trb_comp_code)) {
- /* Issue a reset endpoint command to clear the host side
- * halt, followed by a set dequeue command to move the
- * dequeue pointer past the TD.
- * The class driver clears the device side halt later.
+ /*
+ * xhci internal endpoint state will go to a "halt" state for
+ * any stall, including default control pipe protocol stall.
+ * To clear the host side halt we need to issue a reset endpoint
+ * command, followed by a set dequeue command to move past the
+ * TD.
+ * Class drivers clear the device side halt from a functional
+ * stall later. Hub TT buffer should only be cleared for FS/LS
+ * devices behind HS hubs for functional stalls.
*/
+ if ((ep_index != 0) || (trb_comp_code != COMP_STALL_ERROR))
+ xhci_clear_hub_tt_buffer(xhci, td, ep);
xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index,
ep_ring->stream_id, td, EP_HARD_RESET);
} else {
@@ -2539,6 +2564,15 @@ static int handle_tx_event(struct xhci_hcd *xhci,
xhci_dbg(xhci, "td_list is empty while skip flag set. Clear skip flag for slot %u ep %u.\n",
slot_id, ep_index);
}
+ if (trb_comp_code == COMP_STALL_ERROR ||
+ xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
+ trb_comp_code)) {
+ xhci_cleanup_halted_endpoint(xhci, slot_id,
+ ep_index,
+ ep_ring->stream_id,
+ NULL,
+ EP_HARD_RESET);
+ }
goto cleanup;
}
@@ -3399,8 +3433,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
/* New sg entry */
--num_sgs;
sent_len -= block_len;
- if (num_sgs != 0) {
- sg = sg_next(sg);
+ sg = sg_next(sg);
+ if (num_sgs != 0 && sg) {
block_len = sg_dma_len(sg);
addr = (u64) sg_dma_address(sg);
addr += sent_len;