summaryrefslogtreecommitdiff
path: root/drivers/usb/media/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/media/Kconfig')
-rw-r--r--drivers/usb/media/Kconfig241
1 files changed, 0 insertions, 241 deletions
diff --git a/drivers/usb/media/Kconfig b/drivers/usb/media/Kconfig
deleted file mode 100644
index 189d40f96be5..000000000000
--- a/drivers/usb/media/Kconfig
+++ /dev/null
@@ -1,241 +0,0 @@
-#
-# USB Multimedia device configuration
-#
-comment "USB Multimedia devices"
- depends on USB
-
-config USB_DABUSB
- tristate "DABUSB driver"
- depends on USB
- ---help---
- A Digital Audio Broadcasting (DAB) Receiver for USB and Linux
- brought to you by the DAB-Team
- <http://wwwbode.cs.tum.edu/Par/arch/dab/>. This driver can be taken
- as an example for URB-based bulk, control, and isochronous
- transactions. URB's are explained in
- <file:Documentation/usb/URB.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called dabusb.
-
-comment "Video4Linux support is needed for USB Multimedia device support"
- depends on USB && VIDEO_DEV=n
-
-config USB_VICAM
- tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
- depends on USB && VIDEO_DEV && EXPERIMENTAL
- ---help---
- Say Y here if you have 3com homeconnect camera (vicam).
-
- This driver uses the Video For Linux API. You must say Y or M to
- "Video For Linux" (under Multimedia Devices) to use this driver.
- Information on this API and pointers to "v4l" programs may be found
- at <file:Documentation/video4linux/API.html>.
-
- To compile this driver as a module, choose M here: the
- module will be called vicam.
-
-config USB_DSBR
- tristate "D-Link USB FM radio support (EXPERIMENTAL)"
- depends on USB && VIDEO_DEV && EXPERIMENTAL
- ---help---
- Say Y here if you want to connect this type of radio to your
- computer's USB port. Note that the audio is not digital, and
- you must connect the line out connector to a sound card or a
- set of speakers.
-
- This driver uses the Video For Linux API. You must enable
- (Y or M in config) Video For Linux (under Character Devices)
- to use this driver. Information on this API and pointers to
- "v4l" programs may be found at
- <file:Documentation/video4linux/API.html>.
-
- To compile this driver as a module, choose M here: the
- module will be called dsbr100.
-
-config USB_ET61X251
- tristate "USB ET61X[12]51 PC Camera Controller support"
- depends on USB && VIDEO_DEV
- ---help---
- Say Y here if you want support for cameras based on Etoms ET61X151
- or ET61X251 PC Camera Controllers.
-
- See <file:Documentation/usb/et61x251.txt> for more informations.
-
- This driver uses the Video For Linux API. You must say Y or M to
- "Video For Linux" to use this driver.
-
- To compile this driver as a module, choose M here: the
- module will be called et61x251.
-
-config USB_IBMCAM
- tristate "USB IBM (Xirlink) C-it Camera support"
- depends on USB && VIDEO_DEV
- ---help---
- Say Y here if you want to connect a IBM "C-It" camera, also known as
- "Xirlink PC Camera" to your computer's USB port. For more
- information, read <file:Documentation/usb/ibmcam.txt>.
-
- This driver uses the Video For Linux API. You must enable
- (Y or M in config) Video For Linux (under Character Devices)
- to use this driver. Information on this API and pointers to
- "v4l" programs may be found at
- <file:Documentation/video4linux/API.html>.
-
- To compile this driver as a module, choose M here: the
- module will be called ibmcam.
-
- This camera has several configuration options which
- can be specified when you load the module. Read
- <file:Documentation/usb/ibmcam.txt> to learn more.
-
-config USB_KONICAWC
- tristate "USB Konica Webcam support"
- depends on USB && VIDEO_DEV
- ---help---
- Say Y here if you want support for webcams based on a Konica
- chipset. This is known to work with the Intel YC76 webcam.
-
- This driver uses the Video For Linux API. You must enable
- (Y or M in config) Video For Linux (under Character Devices)
- to use this driver. Information on this API and pointers to
- "v4l" programs may be found at
- <file:Documentation/video4linux/API.html>.
-
- To compile this driver as a module, choose M here: the
- module will be called konicawc.
-
-config USB_OV511
- tristate "USB OV511 Camera support"
- depends on USB && VIDEO_DEV
- ---help---
- Say Y here if you want to connect this type of camera to your
- computer's USB port. See <file:Documentation/usb/ov511.txt> for more
- information and for a list of supported cameras.
-
- This driver uses the Video For Linux API. You must say Y or M to
- "Video For Linux" (under Character Devices) to use this driver.
- Information on this API and pointers to "v4l" programs may be found
- at <file:Documentation/video4linux/API.html>.
-
- To compile this driver as a module, choose M here: the
- module will be called ov511.
-
-config USB_SE401
- tristate "USB SE401 Camera support"
- depends on USB && VIDEO_DEV
- ---help---
- Say Y here if you want to connect this type of camera to your
- computer's USB port. See <file:Documentation/usb/se401.txt> for more
- information and for a list of supported cameras.
-
- This driver uses the Video For Linux API. You must say Y or M to
- "Video For Linux" (under Multimedia Devices) to use this driver.
- Information on this API and pointers to "v4l" programs may be found
- at <file:Documentation/video4linux/API.html>.
-
- To compile this driver as a module, choose M here: the
- module will be called se401.
-
-config USB_SN9C102
- tristate "USB SN9C10x PC Camera Controller support"
- depends on USB && VIDEO_DEV
- ---help---
- Say Y here if you want support for cameras based on SONiX SN9C101,
- SN9C102 or SN9C103 PC Camera Controllers.
-
- See <file:Documentation/usb/sn9c102.txt> for more informations.
-
- This driver uses the Video For Linux API. You must say Y or M to
- "Video For Linux" to use this driver.
-
- To compile this driver as a module, choose M here: the
- module will be called sn9c102.
-
-config USB_STV680
- tristate "USB STV680 (Pencam) Camera support"
- depends on USB && VIDEO_DEV
- ---help---
- Say Y here if you want to connect this type of camera to your
- computer's USB port. This includes the Pencam line of cameras.
- See <file:Documentation/usb/stv680.txt> for more information and for
- a list of supported cameras.
-
- This driver uses the Video For Linux API. You must say Y or M to
- "Video For Linux" (under Multimedia Devices) to use this driver.
- Information on this API and pointers to "v4l" programs may be found
- at <file:Documentation/video4linux/API.html>.
-
- To compile this driver as a module, choose M here: the
- module will be called stv680.
-
-config USB_W9968CF
- tristate "USB W996[87]CF JPEG Dual Mode Camera support"
- depends on USB && VIDEO_DEV && I2C && VIDEO_OVCAMCHIP
- ---help---
- Say Y here if you want support for cameras based on OV681 or
- Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
-
- This driver has an optional plugin, which is distributed as a
- separate module only (released under GPL). It allows to use higher
- resolutions and framerates, but cannot be included in the official
- Linux kernel for performance purposes.
-
- See <file:Documentation/usb/w9968cf.txt> for more informations.
-
- This driver uses the Video For Linux and the I2C APIs. It needs the
- OmniVision Camera Chip support as well. You must say Y or M to
- "Video For Linux", "I2C Support" and "OmniVision Camera Chip
- support" to use this driver.
-
- To compile this driver as a module, choose M here: the
- module will be called w9968cf.
-
-config USB_ZC0301
- tristate "USB ZC0301 Image Processor and Control Chip support"
- depends on USB && VIDEO_DEV
- ---help---
- Say Y here if you want support for cameras based on the ZC0301
- Image Processor and Control Chip.
-
- See <file:Documentation/usb/zc0301.txt> for more informations.
-
- This driver uses the Video For Linux API. You must say Y or M to
- "Video For Linux" to use this driver.
-
- To compile this driver as a module, choose M here: the
- module will be called zc0301.
-
-config USB_PWC
- tristate "USB Philips Cameras"
- depends on USB && VIDEO_DEV
- ---help---
- Say Y or M here if you want to use one of these Philips & OEM
- webcams:
- * Philips PCA645, PCA646
- * Philips PCVC675, PCVC680, PCVC690
- * Philips PCVC720/40, PCVC730, PCVC740, PCVC750
- * Askey VC010
- * Logitech QuickCam Pro 3000, 4000, 'Zoom', 'Notebook Pro'
- and 'Orbit'/'Sphere'
- * Samsung MPC-C10, MPC-C30
- * Creative Webcam 5, Pro Ex
- * SOTEC Afina Eye
- * Visionite VCS-UC300, VCS-UM100
-
- The PCA635, PCVC665 and PCVC720/20 are not supported by this driver
- and never will be, but the 665 and 720/20 are supported by other
- drivers.
-
- See <file:Documentation/usb/philips.txt> for more information and
- installation instructions.
-
- The built-in microphone is enabled by selecting USB Audio support.
-
- This driver uses the Video For Linux API. You must say Y or M to
- "Video For Linux" (under Character Devices) to use this driver.
- Information on this API and pointers to "v4l" programs may be found
- at <file:Documentation/video4linux/API.html>.
-
- To compile this driver as a module, choose M here: the
- module will be called pwc.