diff options
Diffstat (limited to 'drivers/usb/serial')
| -rw-r--r-- | drivers/usb/serial/ch341.c | 35 | ||||
| -rw-r--r-- | drivers/usb/serial/cp210x.c | 1 | ||||
| -rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 14 | ||||
| -rw-r--r-- | drivers/usb/serial/ftdi_sio_ids.h | 13 | ||||
| -rw-r--r-- | drivers/usb/serial/option.c | 94 | ||||
| -rw-r--r-- | drivers/usb/serial/quatech2.c | 2 |
6 files changed, 134 insertions, 25 deletions
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index d10e4c4848a0..7cc36f84821f 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -63,6 +63,7 @@ #define CH341_REG_DIVISOR 0x13 #define CH341_REG_LCR 0x18 #define CH341_REG_LCR2 0x25 +#define CH341_REG_FLOW_CTL 0x27 #define CH341_NBREAK_BITS 0x01 @@ -77,6 +78,9 @@ #define CH341_LCR_CS6 0x01 #define CH341_LCR_CS5 0x00 +#define CH341_FLOW_CTL_NONE 0x00 +#define CH341_FLOW_CTL_RTSCTS 0x01 + #define CH341_QUIRK_LIMITED_PRESCALER BIT(0) #define CH341_QUIRK_SIMULATE_BREAK BIT(1) @@ -478,6 +482,28 @@ err_kill_interrupt_urb: return r; } +static void ch341_set_flow_control(struct tty_struct *tty, + struct usb_serial_port *port, + const struct ktermios *old_termios) +{ + u16 flow_ctl; + int r; + + if (C_CRTSCTS(tty)) + flow_ctl = CH341_FLOW_CTL_RTSCTS; + else + flow_ctl = CH341_FLOW_CTL_NONE; + + r = ch341_control_out(port->serial->dev, + CH341_REQ_WRITE_REG, + (CH341_REG_FLOW_CTL << 8) | CH341_REG_FLOW_CTL, + (flow_ctl << 8) | flow_ctl); + if (r < 0 && old_termios) { + tty->termios.c_cflag &= ~CRTSCTS; + tty->termios.c_cflag |= (old_termios->c_cflag & CRTSCTS); + } +} + /* Old_termios contains the original termios settings and * tty->termios contains the new setting to be used. */ @@ -546,6 +572,8 @@ static void ch341_set_termios(struct tty_struct *tty, spin_unlock_irqrestore(&priv->lock, flags); ch341_set_handshake(port->serial->dev, priv->mcr); + + ch341_set_flow_control(tty, port, old_termios); } /* @@ -632,13 +660,12 @@ restore: static int ch341_break_ctl(struct tty_struct *tty, int break_state) { - const uint16_t ch341_break_reg = - ((uint16_t) CH341_REG_LCR << 8) | CH341_REG_BREAK; + const u16 ch341_break_reg = (CH341_REG_LCR << 8) | CH341_REG_BREAK; struct usb_serial_port *port = tty->driver_data; struct ch341_private *priv = usb_get_serial_port_data(port); + u16 reg_contents; + u8 break_reg[2]; int r; - uint16_t reg_contents; - uint8_t break_reg[2]; if (priv->quirks & CH341_QUIRK_SIMULATE_BREAK) return ch341_simulate_break(tty, break_state); diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index c24101f0a07a..9960ac2b10b7 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -223,6 +223,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */ + { USB_DEVICE(0x1B93, 0x1013) }, /* Phoenix Contact UPS Device */ { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */ { USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index e07c5e3eb18c..9b34e23b7091 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1079,6 +1079,20 @@ static const struct usb_device_id id_table_combined[] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, /* GMC devices */ { USB_DEVICE(GMC_VID, GMC_Z216C_PID) }, + /* Altera USB Blaster 3 */ + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6022_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6025_PID, 2) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6026_PID, 2) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6026_PID, 3) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6029_PID, 2) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602A_PID, 2) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602A_PID, 3) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602C_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602D_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602D_PID, 2) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 2) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 3) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 5ee60ba2a73c..52be47d684ea 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1612,3 +1612,16 @@ */ #define GMC_VID 0x1cd7 #define GMC_Z216C_PID 0x0217 /* GMC Z216C Adapter IR-USB */ + +/* + * Altera USB Blaster 3 (http://www.altera.com). + */ +#define ALTERA_VID 0x09fb +#define ALTERA_UB3_6022_PID 0x6022 +#define ALTERA_UB3_6025_PID 0x6025 +#define ALTERA_UB3_6026_PID 0x6026 +#define ALTERA_UB3_6029_PID 0x6029 +#define ALTERA_UB3_602A_PID 0x602a +#define ALTERA_UB3_602C_PID 0x602c +#define ALTERA_UB3_602D_PID 0x602d +#define ALTERA_UB3_602E_PID 0x602e diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 9ba5584061c8..5cd26dac2069 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -619,13 +619,6 @@ static void option_instat_callback(struct urb *urb); /* Luat Air72*U series based on UNISOC UIS8910 uses UNISOC's vendor ID */ #define LUAT_PRODUCT_AIR720U 0x4e00 -/* MeiG Smart Technology products */ -#define MEIGSMART_VENDOR_ID 0x2dee -/* MeiG Smart SRM825L based on Qualcomm 315 */ -#define MEIGSMART_PRODUCT_SRM825L 0x4d22 -/* MeiG Smart SLM320 based on UNISOC UIS8910 */ -#define MEIGSMART_PRODUCT_SLM320 0x4d41 - /* Device flags */ /* Highest interface number which can be used with NCTRL() and RSVD() */ @@ -1365,23 +1358,23 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(2) | RSVD(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1063, 0xff), /* Telit LN920 (ECM) */ .driver_info = NCTRL(0) | RSVD(1) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1070, 0xff), /* Telit FN990 (rmnet) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1070, 0xff), /* Telit FN990A (rmnet) */ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1071, 0xff), /* Telit FN990 (MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1071, 0xff), /* Telit FN990A (MBIM) */ .driver_info = NCTRL(0) | RSVD(1) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1072, 0xff), /* Telit FN990 (RNDIS) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1072, 0xff), /* Telit FN990A (RNDIS) */ .driver_info = NCTRL(2) | RSVD(3) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff), /* Telit FN990 (ECM) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff), /* Telit FN990A (ECM) */ .driver_info = NCTRL(0) | RSVD(1) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff), /* Telit FN990 (PCIe) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff), /* Telit FN990A (PCIe) */ .driver_info = RSVD(0) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1080, 0xff), /* Telit FE990 (rmnet) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1080, 0xff), /* Telit FE990A (rmnet) */ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1081, 0xff), /* Telit FE990 (MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1081, 0xff), /* Telit FE990A (MBIM) */ .driver_info = NCTRL(0) | RSVD(1) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1082, 0xff), /* Telit FE990 (RNDIS) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1082, 0xff), /* Telit FE990A (RNDIS) */ .driver_info = NCTRL(2) | RSVD(3) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff), /* Telit FE990 (ECM) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff), /* Telit FE990A (ECM) */ .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a0, 0xff), /* Telit FN20C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(3) }, @@ -1395,6 +1388,44 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10aa, 0xff), /* Telit FN920C04 (MBIM) */ .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b0, 0xff, 0xff, 0x30), /* Telit FE990B (rmnet) */ + .driver_info = NCTRL(5) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b0, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b0, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b1, 0xff, 0xff, 0x30), /* Telit FE990B (MBIM) */ + .driver_info = NCTRL(6) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b1, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b1, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b2, 0xff, 0xff, 0x30), /* Telit FE990B (RNDIS) */ + .driver_info = NCTRL(6) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b2, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b2, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x30), /* Telit FE990B (ECM) */ + .driver_info = NCTRL(6) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x60) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c0, 0xff), /* Telit FE910C04 (rmnet) */ + .driver_info = RSVD(0) | NCTRL(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c4, 0xff), /* Telit FE910C04 (rmnet) */ + .driver_info = RSVD(0) | NCTRL(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c8, 0xff), /* Telit FE910C04 (rmnet) */ + .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x30), /* Telit FN990B (rmnet) */ + .driver_info = NCTRL(5) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x30), /* Telit FN990B (MBIM) */ + .driver_info = NCTRL(6) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d2, 0xff, 0xff, 0x30), /* Telit FN990B (RNDIS) */ + .driver_info = NCTRL(6) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d2, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d2, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d3, 0xff, 0xff, 0x30), /* Telit FN990B (ECM) */ + .driver_info = NCTRL(6) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d3, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d3, 0xff, 0xff, 0x60) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), @@ -2247,6 +2278,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(2) }, { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x7127, 0xff, 0x00, 0x00), .driver_info = NCTRL(2) | NCTRL(3) | NCTRL(4) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x7129, 0xff, 0x00, 0x00), /* MediaTek T7XX */ + .driver_info = NCTRL(2) | NCTRL(3) | NCTRL(4) }, { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) }, { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MPL200), .driver_info = RSVD(1) | RSVD(4) }, @@ -2337,6 +2370,14 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a05, 0xff) }, /* Fibocom FM650-CN (NCM mode) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a06, 0xff) }, /* Fibocom FM650-CN (RNDIS mode) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a07, 0xff) }, /* Fibocom FM650-CN (MBIM mode) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d41, 0xff, 0, 0) }, /* MeiG Smart SLM320 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d57, 0xff, 0, 0) }, /* MeiG Smart SLM770A */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d22, 0xff, 0, 0) }, /* MeiG Smart SRM815 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d22, 0xff, 0x10, 0x02) }, /* MeiG Smart SLM828 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d22, 0xff, 0x10, 0x03) }, /* MeiG Smart SLM828 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d22, 0xff, 0xff, 0x30) }, /* MeiG Smart SRM815 and SRM825L */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d22, 0xff, 0xff, 0x40) }, /* MeiG Smart SRM825L */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d22, 0xff, 0xff, 0x60) }, /* MeiG Smart SRM825L */ { USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ @@ -2375,16 +2416,29 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0116, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WWD for Golbal EDU */ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0116, 0xff, 0x00, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0116, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010a, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WRD for WWAN Ready */ + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010a, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010a, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010b, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WWD for WWAN Ready */ + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010b, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010b, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010c, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WRD for WWAN Ready */ + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010c, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010c, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010d, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WWD for WWAN Ready */ + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010d, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010d, 0xff, 0xff, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, LUAT_PRODUCT_AIR720U, 0xff, 0, 0) }, - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SLM320, 0xff, 0, 0) }, - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x30) }, - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x40) }, - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x60) }, + { USB_DEVICE_INTERFACE_CLASS(0x1bbb, 0x0530, 0xff), /* TCL IK512 MBIM */ + .driver_info = NCTRL(1) }, + { USB_DEVICE_INTERFACE_CLASS(0x1bbb, 0x0640, 0xff), /* TCL IK512 ECM */ + .driver_info = NCTRL(3) }, + { USB_DEVICE_INTERFACE_CLASS(0x2949, 0x8700, 0xff) }, /* Neoway N723-EA */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index a317bdbd00ad..72fe83a6c978 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -503,7 +503,7 @@ static void qt2_process_read_urb(struct urb *urb) newport = *(ch + 3); - if (newport > serial->num_ports) { + if (newport >= serial->num_ports) { dev_err(&port->dev, "%s - port change to invalid port: %i\n", __func__, newport); |