diff options
Diffstat (limited to 'drivers/usb')
30 files changed, 210 insertions, 740 deletions
diff --git a/drivers/usb/cdns3/cdns3-pci-wrap.c b/drivers/usb/cdns3/cdns3-pci-wrap.c index c41ddb61b857..b0a29efe7d31 100644 --- a/drivers/usb/cdns3/cdns3-pci-wrap.c +++ b/drivers/usb/cdns3/cdns3-pci-wrap.c @@ -159,8 +159,9 @@ static int cdns3_pci_probe(struct pci_dev *pdev, wrap->plat_dev = platform_device_register_full(&plat_info); if (IS_ERR(wrap->plat_dev)) { pci_disable_device(pdev); + err = PTR_ERR(wrap->plat_dev); kfree(wrap); - return PTR_ERR(wrap->plat_dev); + return err; } } diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c index 44f652e8b5a2..0445da0a5a0c 100644 --- a/drivers/usb/cdns3/ep0.c +++ b/drivers/usb/cdns3/ep0.c @@ -332,7 +332,7 @@ static int cdns3_ep0_feature_handle_device(struct cdns3_device *priv_dev, * for sending status stage. * This time should be less then 3ms. */ - usleep_range(1000, 2000); + mdelay(1); cdns3_set_register_bit(&priv_dev->regs->usb_cmd, USB_CMD_STMODE | USB_STS_TMODE_SEL(tmode - 1)); diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 7fea4999d352..fb8bd60c83f4 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -461,10 +461,12 @@ static int usblp_release(struct inode *inode, struct file *file) mutex_lock(&usblp_mutex); usblp->used = 0; - if (usblp->present) { + if (usblp->present) usblp_unlink_urbs(usblp); - usb_autopm_put_interface(usblp->intf); - } else /* finish cleanup from disconnect */ + + usb_autopm_put_interface(usblp->intf); + + if (!usblp->present) /* finish cleanup from disconnect */ usblp_cleanup(usblp); mutex_unlock(&usblp_mutex); return 0; diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index d7e611645533..d354036ff6c8 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -45,7 +45,7 @@ config USB_AT91 config USB_LPC32XX tristate "LPC32XX USB Peripheral Controller" - depends on ARCH_LPC32XX + depends on ARCH_LPC32XX || COMPILE_TEST depends on I2C select USB_ISP1301 help diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index 8414fac74493..3d499d93c083 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -48,6 +48,7 @@ #define DRIVER_VERSION "02 May 2005" #define POWER_BUDGET 500 /* in mA; use 8 for low-power port testing */ +#define POWER_BUDGET_3 900 /* in mA */ static const char driver_name[] = "dummy_hcd"; static const char driver_desc[] = "USB Host+Gadget Emulator"; @@ -2432,7 +2433,7 @@ static int dummy_start_ss(struct dummy_hcd *dum_hcd) dum_hcd->rh_state = DUMMY_RH_RUNNING; dum_hcd->stream_en_ep = 0; INIT_LIST_HEAD(&dum_hcd->urbp_list); - dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET; + dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3; dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING; dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1; #ifdef CONFIG_USB_OTG diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c index b3e073fb88c6..2b1f3cc7819b 100644 --- a/drivers/usb/gadget/udc/lpc32xx_udc.c +++ b/drivers/usb/gadget/udc/lpc32xx_udc.c @@ -1151,7 +1151,7 @@ static void udc_pop_fifo(struct lpc32xx_udc *udc, u8 *data, u32 bytes) u32 *p32, tmp, cbytes; /* Use optimal data transfer method based on source address and size */ - switch (((u32) data) & 0x3) { + switch (((uintptr_t) data) & 0x3) { case 0: /* 32-bit aligned */ p32 = (u32 *) data; cbytes = (bytes & ~0x3); @@ -1252,7 +1252,7 @@ static void udc_stuff_fifo(struct lpc32xx_udc *udc, u8 *data, u32 bytes) u32 *p32, tmp, cbytes; /* Use optimal data transfer method based on source address and size */ - switch (((u32) data) & 0x3) { + switch (((uintptr_t) data) & 0x3) { case 0: /* 32-bit aligned */ p32 = (u32 *) data; cbytes = (bytes & ~0x3); diff --git a/drivers/usb/host/xhci-ext-caps.c b/drivers/usb/host/xhci-ext-caps.c index f498160df969..3351d07c431f 100644 --- a/drivers/usb/host/xhci-ext-caps.c +++ b/drivers/usb/host/xhci-ext-caps.c @@ -57,6 +57,7 @@ static int xhci_create_intel_xhci_sw_pdev(struct xhci_hcd *xhci, u32 cap_offset) ret = platform_device_add_properties(pdev, role_switch_props); if (ret) { dev_err(dev, "failed to register device properties\n"); + platform_device_put(pdev); return ret; } } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 9741cdeea9d7..85ceb43e3405 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3202,10 +3202,10 @@ static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len, if (usb_urb_dir_out(urb)) { len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs, seg->bounce_buf, new_buff_len, enqd_len); - if (len != seg->bounce_len) + if (len != new_buff_len) xhci_warn(xhci, "WARN Wrong bounce buffer write length: %zu != %d\n", - len, seg->bounce_len); + len, new_buff_len); seg->bounce_dma = dma_map_single(dev, seg->bounce_buf, max_pkt, DMA_TO_DEVICE); } else { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 500865975687..517ec3206f6e 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1032,7 +1032,7 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup) writel(command, &xhci->op_regs->command); xhci->broken_suspend = 0; if (xhci_handshake(&xhci->op_regs->status, - STS_SAVE, 0, 10 * 1000)) { + STS_SAVE, 0, 20 * 1000)) { /* * AMD SNPS xHC 3.0 occasionally does not clear the * SSS bit of USBSTS and when driver tries to poll @@ -1108,6 +1108,18 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) hibernated = true; if (!hibernated) { + /* + * Some controllers might lose power during suspend, so wait + * for controller not ready bit to clear, just as in xHC init. + */ + retval = xhci_handshake(&xhci->op_regs->status, + STS_CNR, 0, 10 * 1000 * 1000); + if (retval) { + xhci_warn(xhci, "Controller not ready at resume %d\n", + retval); + spin_unlock_irq(&xhci->lock); + return retval; + } /* step 1: restore register */ xhci_restore_registers(xhci); /* step 2: initialize command ring buffer */ @@ -3083,6 +3095,7 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd, unsigned int ep_index; unsigned long flags; u32 ep_flag; + int err; xhci = hcd_to_xhci(hcd); if (!host_ep->hcpriv) @@ -3142,7 +3155,17 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd, xhci_free_command(xhci, cfg_cmd); goto cleanup; } - xhci_queue_stop_endpoint(xhci, stop_cmd, udev->slot_id, ep_index, 0); + + err = xhci_queue_stop_endpoint(xhci, stop_cmd, udev->slot_id, + ep_index, 0); + if (err < 0) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_free_command(xhci, cfg_cmd); + xhci_dbg(xhci, "%s: Failed to queue stop ep command, %d ", + __func__, err); + goto cleanup; + } + xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); @@ -3156,8 +3179,16 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd, ctrl_ctx, ep_flag, ep_flag); xhci_endpoint_copy(xhci, cfg_cmd->in_ctx, vdev->out_ctx, ep_index); - xhci_queue_configure_endpoint(xhci, cfg_cmd, cfg_cmd->in_ctx->dma, + err = xhci_queue_configure_endpoint(xhci, cfg_cmd, cfg_cmd->in_ctx->dma, udev->slot_id, false); + if (err < 0) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_free_command(xhci, cfg_cmd); + xhci_dbg(xhci, "%s: Failed to queue config ep command, %d ", + __func__, err); + goto cleanup; + } + xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); @@ -4674,12 +4705,12 @@ static int xhci_update_timeout_for_endpoint(struct xhci_hcd *xhci, alt_timeout = xhci_call_host_update_timeout_for_endpoint(xhci, udev, desc, state, timeout); - /* If we found we can't enable hub-initiated LPM, or + /* If we found we can't enable hub-initiated LPM, and * the U1 or U2 exit latency was too high to allow - * device-initiated LPM as well, just stop searching. + * device-initiated LPM as well, then we will disable LPM + * for this device, so stop searching any further. */ - if (alt_timeout == USB3_LPM_DISABLED || - alt_timeout == USB3_LPM_DEVICE_INITIATED) { + if (alt_timeout == USB3_LPM_DISABLED) { *timeout = alt_timeout; return -E2BIG; } @@ -4790,10 +4821,12 @@ static u16 xhci_calculate_lpm_timeout(struct usb_hcd *hcd, if (intf->dev.driver) { driver = to_usb_driver(intf->dev.driver); if (driver && driver->disable_hub_initiated_lpm) { - dev_dbg(&udev->dev, "Hub-initiated %s disabled " - "at request of driver %s\n", - state_name, driver->name); - return xhci_get_timeout_no_hub_lpm(udev, state); + dev_dbg(&udev->dev, "Hub-initiated %s disabled at request of driver %s\n", + state_name, driver->name); + timeout = xhci_get_timeout_no_hub_lpm(udev, + state); + if (timeout == USB3_LPM_DISABLED) + return timeout; } } @@ -5077,11 +5110,18 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) hcd->has_tt = 1; } else { /* - * Some 3.1 hosts return sbrn 0x30, use xhci supported protocol - * minor revision instead of sbrn. Minor revision is a two digit - * BCD containing minor and sub-minor numbers, only show minor. + * Early xHCI 1.1 spec did not mention USB 3.1 capable hosts + * should return 0x31 for sbrn, or that the minor revision + * is a two digit BCD containig minor and sub-minor numbers. + * This was later clarified in xHCI 1.2. + * + * Some USB 3.1 capable hosts therefore have sbrn 0x30, and + * minor revision set to 0x1 instead of 0x10. */ - minor_rev = xhci->usb3_rhub.min_rev / 0x10; + if (xhci->usb3_rhub.min_rev == 0x1) + minor_rev = 1; + else + minor_rev = xhci->usb3_rhub.min_rev / 0x10; switch (minor_rev) { case 2: @@ -5198,8 +5238,16 @@ static void xhci_clear_tt_buffer_complete(struct usb_hcd *hcd, unsigned int ep_index; unsigned long flags; + /* + * udev might be NULL if tt buffer is cleared during a failed device + * enumeration due to a halted control endpoint. Usb core might + * have allocated a new udev for the next enumeration attempt. + */ + xhci = hcd_to_xhci(hcd); udev = (struct usb_device *)ep->hcpriv; + if (!udev) + return; slot_id = udev->slot_id; ep_index = xhci_get_endpoint_index(&ep->desc); diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 0a57c2cc8e5a..7a6b122c833f 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -716,6 +716,10 @@ static int mts_usb_probe(struct usb_interface *intf, } + if (ep_in_current != &ep_in_set[2]) { + MTS_WARNING("couldn't find two input bulk endpoints. Bailing out.\n"); + return -ENODEV; + } if ( ep_out == -1 ) { MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" ); diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index bdae62b2ffe0..9bce583aada3 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -47,16 +47,6 @@ config USB_SEVSEG To compile this driver as a module, choose M here: the module will be called usbsevseg. -config USB_RIO500 - tristate "USB Diamond Rio500 support" - help - Say Y here if you want to connect a USB Rio500 mp3 player to your - computer's USB port. Please read <file:Documentation/usb/rio.rst> - for more information. - - To compile this driver as a module, choose M here: the - module will be called rio500. - config USB_LEGOTOWER tristate "USB Lego Infrared Tower support" help diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 109f54f5b9aa..0d416eb624bb 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -17,7 +17,6 @@ obj-$(CONFIG_USB_ISIGHTFW) += isight_firmware.o obj-$(CONFIG_USB_LCD) += usblcd.o obj-$(CONFIG_USB_LD) += ldusb.o obj-$(CONFIG_USB_LEGOTOWER) += legousbtower.o -obj-$(CONFIG_USB_RIO500) += rio500.o obj-$(CONFIG_USB_TEST) += usbtest.o obj-$(CONFIG_USB_EHSET_TEST_FIXTURE) += ehset.o obj-$(CONFIG_USB_TRANCEVIBRATOR) += trancevibrator.o diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index 344d523b0502..f9efec719359 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -75,6 +75,7 @@ struct adu_device { char serial_number[8]; int open_count; /* number of times this port has been opened */ + unsigned long disconnected:1; char *read_buffer_primary; int read_buffer_length; @@ -116,7 +117,7 @@ static void adu_abort_transfers(struct adu_device *dev) { unsigned long flags; - if (dev->udev == NULL) + if (dev->disconnected) return; /* shutdown transfer */ @@ -243,7 +244,7 @@ static int adu_open(struct inode *inode, struct file *file) } dev = usb_get_intfdata(interface); - if (!dev || !dev->udev) { + if (!dev) { retval = -ENODEV; goto exit_no_device; } @@ -326,7 +327,7 @@ static int adu_release(struct inode *inode, struct file *file) } adu_release_internal(dev); - if (dev->udev == NULL) { + if (dev->disconnected) { /* the device was unplugged before the file was released */ if (!dev->open_count) /* ... and we're the last user */ adu_delete(dev); @@ -354,7 +355,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, return -ERESTARTSYS; /* verify that the device wasn't unplugged */ - if (dev->udev == NULL) { + if (dev->disconnected) { retval = -ENODEV; pr_err("No device or device unplugged %d\n", retval); goto exit; @@ -518,7 +519,7 @@ static ssize_t adu_write(struct file *file, const __user char *buffer, goto exit_nolock; /* verify that the device wasn't unplugged */ - if (dev->udev == NULL) { + if (dev->disconnected) { retval = -ENODEV; pr_err("No device or device unplugged %d\n", retval); goto exit; @@ -762,14 +763,18 @@ static void adu_disconnect(struct usb_interface *interface) dev = usb_get_intfdata(interface); - mutex_lock(&dev->mtx); /* not interruptible */ - dev->udev = NULL; /* poison */ usb_deregister_dev(interface, &adu_class); - mutex_unlock(&dev->mtx); + + usb_poison_urb(dev->interrupt_in_urb); + usb_poison_urb(dev->interrupt_out_urb); mutex_lock(&adutux_mutex); usb_set_intfdata(interface, NULL); + mutex_lock(&dev->mtx); /* not interruptible */ + dev->disconnected = 1; + mutex_unlock(&dev->mtx); + /* if the device is not opened, then we clean up right now */ if (!dev->open_count) adu_delete(dev); diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 006cf13b2199..44d6a3381804 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -179,7 +179,6 @@ static const struct usb_device_id tower_table[] = { }; MODULE_DEVICE_TABLE (usb, tower_table); -static DEFINE_MUTEX(open_disc_mutex); #define LEGO_USB_TOWER_MINOR_BASE 160 @@ -191,6 +190,7 @@ struct lego_usb_tower { unsigned char minor; /* the starting minor number for this device */ int open_count; /* number of times this port has been opened */ + unsigned long disconnected:1; char* read_buffer; size_t read_buffer_length; /* this much came in */ @@ -290,8 +290,6 @@ static inline void lego_usb_tower_debug_data(struct device *dev, */ static inline void tower_delete (struct lego_usb_tower *dev) { - tower_abort_transfers (dev); - /* free data structures */ usb_free_urb(dev->interrupt_in_urb); usb_free_urb(dev->interrupt_out_urb); @@ -332,18 +330,14 @@ static int tower_open (struct inode *inode, struct file *file) goto exit; } - mutex_lock(&open_disc_mutex); dev = usb_get_intfdata(interface); - if (!dev) { - mutex_unlock(&open_disc_mutex); retval = -ENODEV; goto exit; } /* lock this device */ if (mutex_lock_interruptible(&dev->lock)) { - mutex_unlock(&open_disc_mutex); retval = -ERESTARTSYS; goto exit; } @@ -351,12 +345,9 @@ static int tower_open (struct inode *inode, struct file *file) /* allow opening only once */ if (dev->open_count) { - mutex_unlock(&open_disc_mutex); retval = -EBUSY; goto unlock_exit; } - dev->open_count = 1; - mutex_unlock(&open_disc_mutex); /* reset the tower */ result = usb_control_msg (dev->udev, @@ -396,13 +387,14 @@ static int tower_open (struct inode *inode, struct file *file) dev_err(&dev->udev->dev, "Couldn't submit interrupt_in_urb %d\n", retval); dev->interrupt_in_running = 0; - dev->open_count = 0; goto unlock_exit; } /* save device in the file's private structure */ file->private_data = dev; + dev->open_count = 1; + unlock_exit: mutex_unlock(&dev->lock); @@ -423,10 +415,9 @@ static int tower_release (struct inode *inode, struct file *file) if (dev == NULL) { retval = -ENODEV; - goto exit_nolock; + goto exit; } - mutex_lock(&open_disc_mutex); if (mutex_lock_interruptible(&dev->lock)) { retval = -ERESTARTSYS; goto exit; @@ -438,7 +429,8 @@ static int tower_release (struct inode *inode, struct file *file) retval = -ENODEV; goto unlock_exit; } - if (dev->udev == NULL) { + + if (dev->disconnected) { /* the device was unplugged before the file was released */ /* unlock here as tower_delete frees dev */ @@ -456,10 +448,7 @@ static int tower_release (struct inode *inode, struct file *file) unlock_exit: mutex_unlock(&dev->lock); - exit: - mutex_unlock(&open_disc_mutex); -exit_nolock: return retval; } @@ -477,10 +466,9 @@ static void tower_abort_transfers (struct lego_usb_tower *dev) if (dev->interrupt_in_running) { dev->interrupt_in_running = 0; mb(); - if (dev->udev) - usb_kill_urb (dev->interrupt_in_urb); + usb_kill_urb(dev->interrupt_in_urb); } - if (dev->interrupt_out_busy && dev->udev) + if (dev->interrupt_out_busy) usb_kill_urb(dev->interrupt_out_urb); } @@ -516,7 +504,7 @@ static __poll_t tower_poll (struct file *file, poll_table *wait) dev = file->private_data; - if (!dev->udev) + if (dev->disconnected) return EPOLLERR | EPOLLHUP; poll_wait(file, &dev->read_wait, wait); @@ -563,7 +551,7 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count, } /* verify that the device wasn't unplugged */ - if (dev->udev == NULL) { + if (dev->disconnected) { retval = -ENODEV; pr_err("No device or device unplugged %d\n", retval); goto unlock_exit; @@ -649,7 +637,7 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t } /* verify that the device wasn't unplugged */ - if (dev->udev == NULL) { + if (dev->disconnected) { retval = -ENODEV; pr_err("No device or device unplugged %d\n", retval); goto unlock_exit; @@ -759,7 +747,7 @@ static void tower_interrupt_in_callback (struct urb *urb) resubmit: /* resubmit if we're still running */ - if (dev->interrupt_in_running && dev->udev) { + if (dev->interrupt_in_running) { retval = usb_submit_urb (dev->interrupt_in_urb, GFP_ATOMIC); if (retval) dev_err(&dev->udev->dev, @@ -824,6 +812,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device dev->udev = udev; dev->open_count = 0; + dev->disconnected = 0; dev->read_buffer = NULL; dev->read_buffer_length = 0; @@ -891,8 +880,10 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device get_version_reply, sizeof(*get_version_reply), 1000); - if (result < 0) { - dev_err(idev, "LEGO USB Tower get version control request failed\n"); + if (result < sizeof(*get_version_reply)) { + if (result >= 0) + result = -EIO; + dev_err(idev, "get version request failed: %d\n", result); retval = result; goto error; } @@ -910,7 +901,6 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device if (retval) { /* something prevented us from registering this driver */ dev_err(idev, "Not able to get a minor for this device.\n"); - usb_set_intfdata (interface, NULL); goto error; } dev->minor = interface->minor; @@ -942,23 +932,24 @@ static void tower_disconnect (struct usb_interface *interface) int minor; dev = usb_get_intfdata (interface); - mutex_lock(&open_disc_mutex); - usb_set_intfdata (interface, NULL); minor = dev->minor; - /* give back our minor */ + /* give back our minor and prevent further open() */ usb_deregister_dev (interface, &tower_class); + /* stop I/O */ + usb_poison_urb(dev->interrupt_in_urb); + usb_poison_urb(dev->interrupt_out_urb); + mutex_lock(&dev->lock); - mutex_unlock(&open_disc_mutex); /* if the device is not opened, then we clean up right now */ if (!dev->open_count) { mutex_unlock(&dev->lock); tower_delete (dev); } else { - dev->udev = NULL; + dev->disconnected = 1; /* wake up pollers */ wake_up_interruptible_all(&dev->read_wait); wake_up_interruptible_all(&dev->write_wait); diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c deleted file mode 100644 index 30cae5e1954d..000000000000 --- a/drivers/usb/misc/rio500.c +++ /dev/null @@ -1,554 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* -*- linux-c -*- */ - -/* - * Driver for USB Rio 500 - * - * Cesar Miquel (miquel@df.uba.ar) - * - * based on hp_scanner.c by David E. Nelson (dnelson@jump.net) - * - * Based upon mouse.c (Brad Keryan) and printer.c (Michael Gee). - * - * Changelog: - * 30/05/2003 replaced lock/unlock kernel with up/down - * Daniele Bellucci bellucda@tiscali.it - * */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/sched/signal.h> -#include <linux/mutex.h> -#include <linux/errno.h> -#include <linux/random.h> -#include <linux/poll.h> -#include <linux/slab.h> -#include <linux/spinlock.h> -#include <linux/usb.h> -#include <linux/wait.h> - -#include "rio500_usb.h" - -#define DRIVER_AUTHOR "Cesar Miquel <miquel@df.uba.ar>" -#define DRIVER_DESC "USB Rio 500 driver" - -#define RIO_MINOR 64 - -/* stall/wait timeout for rio */ -#define NAK_TIMEOUT (HZ) - -#define IBUF_SIZE 0x1000 - -/* Size of the rio buffer */ -#define OBUF_SIZE 0x10000 - -struct rio_usb_data { - struct usb_device *rio_dev; /* init: probe_rio */ - unsigned int ifnum; /* Interface number of the USB device */ - int isopen; /* nz if open */ - int present; /* Device is present on the bus */ - char *obuf, *ibuf; /* transfer buffers */ - char bulk_in_ep, bulk_out_ep; /* Endpoint assignments */ - wait_queue_head_t wait_q; /* for timeouts */ -}; - -static DEFINE_MUTEX(rio500_mutex); -static struct rio_usb_data rio_instance; - -static int open_rio(struct inode *inode, struct file *file) -{ - struct rio_usb_data *rio = &rio_instance; - - /* against disconnect() */ - mutex_lock(&rio500_mutex); - - if (rio->isopen || !rio->present) { - mutex_unlock(&rio500_mutex); - return -EBUSY; - } - rio->isopen = 1; - - init_waitqueue_head(&rio->wait_q); - - - dev_info(&rio->rio_dev->dev, "Rio opened.\n"); - mutex_unlock(&rio500_mutex); - - return 0; -} - -static int close_rio(struct inode *inode, struct file *file) -{ - struct rio_usb_data *rio = &rio_instance; - - /* against disconnect() */ - mutex_lock(&rio500_mutex); - - rio->isopen = 0; - if (!rio->present) { - /* cleanup has been delayed */ - kfree(rio->ibuf); - kfree(rio->obuf); - rio->ibuf = NULL; - rio->obuf = NULL; - } else { - dev_info(&rio->rio_dev->dev, "Rio closed.\n"); - } - mutex_unlock(&rio500_mutex); - return 0; -} - -static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) -{ - struct RioCommand rio_cmd; - struct rio_usb_data *rio = &rio_instance; - void __user *data; - unsigned char *buffer; - int result, requesttype; - int retries; - int retval=0; - - mutex_lock(&rio500_mutex); - /* Sanity check to make sure rio is connected, powered, etc */ - if (rio->present == 0 || rio->rio_dev == NULL) { - retval = -ENODEV; - goto err_out; - } - - switch (cmd) { - case RIO_RECV_COMMAND: - data = (void __user *) arg; - if (data == NULL) - break; - if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) { - retval = -EFAULT; - goto err_out; - } - if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) { - retval = -EINVAL; - goto err_out; - } - buffer = (unsigned char *) __get_free_page(GFP_KERNEL); - if (buffer == NULL) { - retval = -ENOMEM; - goto err_out; - } - if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) { - retval = -EFAULT; - free_page((unsigned long) buffer); - goto err_out; - } - - requesttype = rio_cmd.requesttype | USB_DIR_IN | - USB_TYPE_VENDOR | USB_RECIP_DEVICE; - dev_dbg(&rio->rio_dev->dev, - "sending command:reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n", - requesttype, rio_cmd.request, rio_cmd.value, - rio_cmd.index, rio_cmd.length); - /* Send rio control message */ - retries = 3; - while (retries) { - result = usb_control_msg(rio->rio_dev, - usb_rcvctrlpipe(rio-> rio_dev, 0), - rio_cmd.request, - requesttype, - rio_cmd.value, - rio_cmd.index, buffer, - rio_cmd.length, - jiffies_to_msecs(rio_cmd.timeout)); - if (result == -ETIMEDOUT) - retries--; - else if (result < 0) { - dev_err(&rio->rio_dev->dev, - "Error executing ioctrl. code = %d\n", - result); - retries = 0; - } else { - dev_dbg(&rio->rio_dev->dev, - "Executed ioctl. Result = %d (data=%02x)\n", - result, buffer[0]); - if (copy_to_user(rio_cmd.buffer, buffer, - rio_cmd.length)) { - free_page((unsigned long) buffer); - retval = -EFAULT; - goto err_out; - } - retries = 0; - } - - /* rio_cmd.buffer contains a raw stream of single byte - data which has been returned from rio. Data is - interpreted at application level. For data that - will be cast to data types longer than 1 byte, data - will be little_endian and will potentially need to - be swapped at the app level */ - - } - free_page((unsigned long) buffer); - break; - - case RIO_SEND_COMMAND: - data = (void __user *) arg; - if (data == NULL) - break; - if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) { - retval = -EFAULT; - goto err_out; - } - if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) { - retval = -EINVAL; - goto err_out; - } - buffer = (unsigned char *) __get_free_page(GFP_KERNEL); - if (buffer == NULL) { - retval = -ENOMEM; - goto err_out; - } - if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) { - free_page((unsigned long)buffer); - retval = -EFAULT; - goto err_out; - } - - requesttype = rio_cmd.requesttype | USB_DIR_OUT | - USB_TYPE_VENDOR | USB_RECIP_DEVICE; - dev_dbg(&rio->rio_dev->dev, - "sending command: reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n", - requesttype, rio_cmd.request, rio_cmd.value, - rio_cmd.index, rio_cmd.length); - /* Send rio control message */ - retries = 3; - while (retries) { - result = usb_control_msg(rio->rio_dev, - usb_sndctrlpipe(rio-> rio_dev, 0), - rio_cmd.request, - requesttype, - rio_cmd.value, - rio_cmd.index, buffer, - rio_cmd.length, - jiffies_to_msecs(rio_cmd.timeout)); - if (result == -ETIMEDOUT) - retries--; - else if (result < 0) { - dev_err(&rio->rio_dev->dev, - "Error executing ioctrl. code = %d\n", - result); - retries = 0; - } else { - dev_dbg(&rio->rio_dev->dev, - "Executed ioctl. Result = %d\n", result); - retries = 0; - - } - - } - free_page((unsigned long) buffer); - break; - - default: - retval = -ENOTTY; - break; - } - - -err_out: - mutex_unlock(&rio500_mutex); - return retval; -} - -static ssize_t -write_rio(struct file *file, const char __user *buffer, - size_t count, loff_t * ppos) -{ - DEFINE_WAIT(wait); - struct rio_usb_data *rio = &rio_instance; - - unsigned long copy_size; - unsigned long bytes_written = 0; - unsigned int partial; - - int result = 0; - int maxretry; - int errn = 0; - int intr; - - intr = mutex_lock_interruptible(&rio500_mutex); - if (intr) - return -EINTR; - /* Sanity check to make sure rio is connected, powered, etc */ - if (rio->present == 0 || rio->rio_dev == NULL) { - mutex_unlock(&rio500_mutex); - return -ENODEV; - } - - - - do { - unsigned long thistime; - char *obuf = rio->obuf; - - thistime = copy_size = - (count >= OBUF_SIZE) ? OBUF_SIZE : count; - if (copy_from_user(rio->obuf, buffer, copy_size)) { - errn = -EFAULT; - goto error; - } - maxretry = 5; - while (thistime) { - if (!rio->rio_dev) { - errn = -ENODEV; - goto error; - } - if (signal_pending(current)) { - mutex_unlock(&rio500_mutex); - return bytes_written ? bytes_written : -EINTR; - } - - result = usb_bulk_msg(rio->rio_dev, - usb_sndbulkpipe(rio->rio_dev, 2), - obuf, thistime, &partial, 5000); - - dev_dbg(&rio->rio_dev->dev, - "write stats: result:%d thistime:%lu partial:%u\n", - result, thistime, partial); - - if (result == -ETIMEDOUT) { /* NAK - so hold for a while */ - if (!maxretry--) { - errn = -ETIME; - goto error; - } - prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE); - schedule_timeout(NAK_TIMEOUT); - finish_wait(&rio->wait_q, &wait); - continue; - } else if (!result && partial) { - obuf += partial; - thistime -= partial; - } else - break; - } - if (result) { - dev_err(&rio->rio_dev->dev, "Write Whoops - %x\n", - result); - errn = -EIO; - goto error; - } - bytes_written += copy_size; - count -= copy_size; - buffer += copy_size; - } while (count > 0); - - mutex_unlock(&rio500_mutex); - - return bytes_written ? bytes_written : -EIO; - -error: - mutex_unlock(&rio500_mutex); - return errn; -} - -static ssize_t -read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) -{ - DEFINE_WAIT(wait); - struct rio_usb_data *rio = &rio_instance; - ssize_t read_count; - unsigned int partial; - int this_read; - int result; - int maxretry = 10; - char *ibuf; - int intr; - - intr = mutex_lock_interruptible(&rio500_mutex); - if (intr) - return -EINTR; - /* Sanity check to make sure rio is connected, powered, etc */ - if (rio->present == 0 || rio->rio_dev == NULL) { - mutex_unlock(&rio500_mutex); - return -ENODEV; - } - - ibuf = rio->ibuf; - - read_count = 0; - - - while (count > 0) { - if (signal_pending(current)) { - mutex_unlock(&rio500_mutex); - return read_count ? read_count : -EINTR; - } - if (!rio->rio_dev) { - mutex_unlock(&rio500_mutex); - return -ENODEV; - } - this_read = (count >= IBUF_SIZE) ? IBUF_SIZE : count; - - result = usb_bulk_msg(rio->rio_dev, - usb_rcvbulkpipe(rio->rio_dev, 1), - ibuf, this_read, &partial, - 8000); - - dev_dbg(&rio->rio_dev->dev, - "read stats: result:%d this_read:%u partial:%u\n", - result, this_read, partial); - - if (partial) { - count = this_read = partial; - } else if (result == -ETIMEDOUT || result == 15) { /* FIXME: 15 ??? */ - if (!maxretry--) { - mutex_unlock(&rio500_mutex); - dev_err(&rio->rio_dev->dev, - "read_rio: maxretry timeout\n"); - return -ETIME; - } - prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE); - schedule_timeout(NAK_TIMEOUT); - finish_wait(&rio->wait_q, &wait); - continue; - } else if (result != -EREMOTEIO) { - mutex_unlock(&rio500_mutex); - dev_err(&rio->rio_dev->dev, - "Read Whoops - result:%d partial:%u this_read:%u\n", - result, partial, this_read); - return -EIO; - } else { - mutex_unlock(&rio500_mutex); - return (0); - } - - if (this_read) { - if (copy_to_user(buffer, ibuf, this_read)) { - mutex_unlock(&rio500_mutex); - return -EFAULT; - } - count -= this_read; - read_count += this_read; - buffer += this_read; - } - } - mutex_unlock(&rio500_mutex); - return read_count; -} - -static const struct file_operations usb_rio_fops = { - .owner = THIS_MODULE, - .read = read_rio, - .write = write_rio, - .unlocked_ioctl = ioctl_rio, - .open = open_rio, - .release = close_rio, - .llseek = noop_llseek, -}; - -static struct usb_class_driver usb_rio_class = { - .name = "rio500%d", - .fops = &usb_rio_fops, - .minor_base = RIO_MINOR, -}; - -static int probe_rio(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *dev = interface_to_usbdev(intf); - struct rio_usb_data *rio = &rio_instance; - int retval = -ENOMEM; - char *ibuf, *obuf; - - if (rio->present) { - dev_info(&intf->dev, "Second USB Rio at address %d refused\n", dev->devnum); - return -EBUSY; - } - dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum); - - obuf = kmalloc(OBUF_SIZE, GFP_KERNEL); - if (!obuf) { - dev_err(&dev->dev, - "probe_rio: Not enough memory for the output buffer\n"); - goto err_obuf; - } - dev_dbg(&intf->dev, "obuf address: %p\n", obuf); - - ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL); - if (!ibuf) { - dev_err(&dev->dev, - "probe_rio: Not enough memory for the input buffer\n"); - goto err_ibuf; - } - dev_dbg(&intf->dev, "ibuf address: %p\n", ibuf); - - mutex_lock(&rio500_mutex); - rio->rio_dev = dev; - rio->ibuf = ibuf; - rio->obuf = obuf; - rio->present = 1; - mutex_unlock(&rio500_mutex); - - retval = usb_register_dev(intf, &usb_rio_class); - if (retval) { - dev_err(&dev->dev, - "Not able to get a minor for this device.\n"); - goto err_register; - } - - usb_set_intfdata(intf, rio); - return retval; - - err_register: - mutex_lock(&rio500_mutex); - rio->present = 0; - mutex_unlock(&rio500_mutex); - err_ibuf: - kfree(obuf); - err_obuf: - return retval; -} - -static void disconnect_rio(struct usb_interface *intf) -{ - struct rio_usb_data *rio = usb_get_intfdata (intf); - - usb_set_intfdata (intf, NULL); - if (rio) { - usb_deregister_dev(intf, &usb_rio_class); - - mutex_lock(&rio500_mutex); - if (rio->isopen) { - rio->isopen = 0; - /* better let it finish - the release will do whats needed */ - rio->rio_dev = NULL; - mutex_unlock(&rio500_mutex); - return; - } - kfree(rio->ibuf); - kfree(rio->obuf); - - dev_info(&intf->dev, "USB Rio disconnected.\n"); - - rio->present = 0; - mutex_unlock(&rio500_mutex); - } -} - -static const struct usb_device_id rio_table[] = { - { USB_DEVICE(0x0841, 1) }, /* Rio 500 */ - { } /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE (usb, rio_table); - -static struct usb_driver rio_driver = { - .name = "rio500", - .probe = probe_rio, - .disconnect = disconnect_rio, - .id_table = rio_table, -}; - -module_usb_driver(rio_driver); - -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_LICENSE("GPL"); - diff --git a/drivers/usb/misc/rio500_usb.h b/drivers/usb/misc/rio500_usb.h deleted file mode 100644 index 6db7a5863496..000000000000 --- a/drivers/usb/misc/rio500_usb.h +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* ---------------------------------------------------------------------- - Copyright (C) 2000 Cesar Miquel (miquel@df.uba.ar) - ---------------------------------------------------------------------- */ - -#define RIO_SEND_COMMAND 0x1 -#define RIO_RECV_COMMAND 0x2 - -#define RIO_DIR_OUT 0x0 -#define RIO_DIR_IN 0x1 - -struct RioCommand { - short length; - int request; - int requesttype; - int value; - int index; - void __user *buffer; - int timeout; -}; diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 9ba4a4e68d91..61e9e987fe4a 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -18,6 +18,7 @@ #include <linux/slab.h> #include <linux/errno.h> #include <linux/mutex.h> +#include <linux/rwsem.h> #include <linux/uaccess.h> #include <linux/usb.h> @@ -29,16 +30,12 @@ #define IOCTL_GET_DRV_VERSION 2 -static DEFINE_MUTEX(lcd_mutex); static const struct usb_device_id id_table[] = { { .idVendor = 0x10D2, .match_flags = USB_DEVICE_ID_MATCH_VENDOR, }, { }, }; MODULE_DEVICE_TABLE(usb, id_table); -static DEFINE_MUTEX(open_disc_mutex); - - struct usb_lcd { struct usb_device *udev; /* init: probe_lcd */ struct usb_interface *interface; /* the interface for @@ -57,6 +54,8 @@ struct usb_lcd { using up all RAM */ struct usb_anchor submitted; /* URBs to wait for before suspend */ + struct rw_semaphore io_rwsem; + unsigned long disconnected:1; }; #define to_lcd_dev(d) container_of(d, struct usb_lcd, kref) @@ -81,40 +80,29 @@ static int lcd_open(struct inode *inode, struct file *file) struct usb_interface *interface; int subminor, r; - mutex_lock(&lcd_mutex); subminor = iminor(inode); interface = usb_find_interface(&lcd_driver, subminor); if (!interface) { - mutex_unlock(&lcd_mutex); - printk(KERN_ERR "USBLCD: %s - error, can't find device for minor %d\n", + pr_err("USBLCD: %s - error, can't find device for minor %d\n", __func__, subminor); return -ENODEV; } - mutex_lock(&open_disc_mutex); dev = usb_get_intfdata(interface); - if (!dev) { - mutex_unlock(&open_disc_mutex); - mutex_unlock(&lcd_mutex); - return -ENODEV; - } /* increment our usage count for the device */ kref_get(&dev->kref); - mutex_unlock(&open_disc_mutex); /* grab a power reference */ r = usb_autopm_get_interface(interface); if (r < 0) { kref_put(&dev->kref, lcd_delete); - mutex_unlock(&lcd_mutex); return r; } /* save our object in the file's private structure */ file->private_data = dev; - mutex_unlock(&lcd_mutex); return 0; } @@ -142,6 +130,13 @@ static ssize_t lcd_read(struct file *file, char __user * buffer, dev = file->private_data; + down_read(&dev->io_rwsem); + + if (dev->disconnected) { + retval = -ENODEV; + goto out_up_io; + } + /* do a blocking bulk read to get data from the device */ retval = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, @@ -158,6 +153,9 @@ static ssize_t lcd_read(struct file *file, char __user * buffer, retval = bytes_read; } +out_up_io: + up_read(&dev->io_rwsem); + return retval; } @@ -173,14 +171,12 @@ static long lcd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) switch (cmd) { case IOCTL_GET_HARD_VERSION: - mutex_lock(&lcd_mutex); bcdDevice = le16_to_cpu((dev->udev)->descriptor.bcdDevice); sprintf(buf, "%1d%1d.%1d%1d", (bcdDevice & 0xF000)>>12, (bcdDevice & 0xF00)>>8, (bcdDevice & 0xF0)>>4, (bcdDevice & 0xF)); - mutex_unlock(&lcd_mutex); if (copy_to_user((void __user *)arg, buf, strlen(buf)) != 0) return -EFAULT; break; @@ -237,11 +233,18 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, if (r < 0) return -EINTR; + down_read(&dev->io_rwsem); + + if (dev->disconnected) { + retval = -ENODEV; + goto err_up_io; + } + /* create a urb, and a buffer for it, and copy the data to the urb */ urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) { retval = -ENOMEM; - goto err_no_buf; + goto err_up_io; } buf = usb_alloc_coherent(dev->udev, count, GFP_KERNEL, @@ -278,6 +281,7 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, the USB core will eventually free it entirely */ usb_free_urb(urb); + up_read(&dev->io_rwsem); exit: return count; error_unanchor: @@ -285,7 +289,8 @@ error_unanchor: error: usb_free_coherent(dev->udev, count, buf, urb->transfer_dma); usb_free_urb(urb); -err_no_buf: +err_up_io: + up_read(&dev->io_rwsem); up(&dev->limit_sem); return retval; } @@ -325,6 +330,7 @@ static int lcd_probe(struct usb_interface *interface, kref_init(&dev->kref); sema_init(&dev->limit_sem, USB_LCD_CONCURRENT_WRITES); + init_rwsem(&dev->io_rwsem); init_usb_anchor(&dev->submitted); dev->udev = usb_get_dev(interface_to_usbdev(interface)); @@ -365,7 +371,6 @@ static int lcd_probe(struct usb_interface *interface, /* something prevented us from registering this driver */ dev_err(&interface->dev, "Not able to get a minor for this device.\n"); - usb_set_intfdata(interface, NULL); goto error; } @@ -411,17 +416,18 @@ static int lcd_resume(struct usb_interface *intf) static void lcd_disconnect(struct usb_interface *interface) { - struct usb_lcd *dev; + struct usb_lcd *dev = usb_get_intfdata(interface); int minor = interface->minor; - mutex_lock(&open_disc_mutex); - dev = usb_get_intfdata(interface); - usb_set_intfdata(interface, NULL); - mutex_unlock(&open_disc_mutex); - /* give back our minor */ usb_deregister_dev(interface, &lcd_class); + down_write(&dev->io_rwsem); + dev->disconnected = 1; + up_write(&dev->io_rwsem); + + usb_kill_anchored_urbs(&dev->submitted); + /* decrement our usage count */ kref_put(&dev->kref, lcd_delete); diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 6715a128e6c8..8d52d4336c29 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -132,6 +132,7 @@ static void yurex_interrupt(struct urb *urb) switch (status) { case 0: /*success*/ break; + /* The device is terminated or messed up, give up */ case -EOVERFLOW: dev_err(&dev->interface->dev, "%s - overflow with length %d, actual length is %d\n", @@ -140,12 +141,13 @@ static void yurex_interrupt(struct urb *urb) case -ENOENT: case -ESHUTDOWN: case -EILSEQ: - /* The device is terminated, clean up */ + case -EPROTO: + case -ETIME: return; default: dev_err(&dev->interface->dev, "%s - unknown status received: %d\n", __func__, status); - goto exit; + return; } /* handle received message */ @@ -177,7 +179,6 @@ static void yurex_interrupt(struct urb *urb) break; } -exit: retval = usb_submit_urb(dev->urb, GFP_ATOMIC); if (retval) { dev_err(&dev->interface->dev, "%s - usb_submit_urb failed: %d\n", diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h index d1a0a35ecfff..0824099b905e 100644 --- a/drivers/usb/renesas_usbhs/common.h +++ b/drivers/usb/renesas_usbhs/common.h @@ -211,6 +211,7 @@ struct usbhs_priv; /* DCPCTR */ #define BSTS (1 << 15) /* Buffer Status */ #define SUREQ (1 << 14) /* Sending SETUP Token */ +#define INBUFM (1 << 14) /* (PIPEnCTR) Transfer Buffer Monitor */ #define CSSTS (1 << 12) /* CSSTS Status */ #define ACLRM (1 << 9) /* Buffer Auto-Clear Mode */ #define SQCLR (1 << 8) /* Toggle Bit Clear */ diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index 2a01ceb71641..86637cd066cf 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -89,7 +89,7 @@ static void __usbhsf_pkt_del(struct usbhs_pkt *pkt) list_del_init(&pkt->node); } -static struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe) +struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe) { return list_first_entry_or_null(&pipe->list, struct usbhs_pkt, node); } diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h index 88d1816bcda2..c3d3cc35cee0 100644 --- a/drivers/usb/renesas_usbhs/fifo.h +++ b/drivers/usb/renesas_usbhs/fifo.h @@ -97,5 +97,6 @@ void usbhs_pkt_push(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt, void *buf, int len, int zero, int sequence); struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt); void usbhs_pkt_start(struct usbhs_pipe *pipe); +struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe); #endif /* RENESAS_USB_FIFO_H */ diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 4d571a5205e2..e5ef56991dba 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -722,8 +722,7 @@ static int __usbhsg_ep_set_halt_wedge(struct usb_ep *ep, int halt, int wedge) struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); struct device *dev = usbhsg_gpriv_to_dev(gpriv); unsigned long flags; - - usbhsg_pipe_disable(uep); + int ret = 0; dev_dbg(dev, "set halt %d (pipe %d)\n", halt, usbhs_pipe_number(pipe)); @@ -731,6 +730,18 @@ static int __usbhsg_ep_set_halt_wedge(struct usb_ep *ep, int halt, int wedge) /******************** spin lock ********************/ usbhs_lock(priv, flags); + /* + * According to usb_ep_set_halt()'s description, this function should + * return -EAGAIN if the IN endpoint has any queue or data. Note + * that the usbhs_pipe_is_dir_in() returns false if the pipe is an + * IN endpoint in the gadget mode. + */ + if (!usbhs_pipe_is_dir_in(pipe) && (__usbhsf_pkt_get(pipe) || + usbhs_pipe_contains_transmittable_data(pipe))) { + ret = -EAGAIN; + goto out; + } + if (halt) usbhs_pipe_stall(pipe); else @@ -741,10 +752,11 @@ static int __usbhsg_ep_set_halt_wedge(struct usb_ep *ep, int halt, int wedge) else usbhsg_status_clr(gpriv, USBHSG_STATUS_WEDGE); +out: usbhs_unlock(priv, flags); /******************** spin unlock ******************/ - return 0; + return ret; } static int usbhsg_ep_set_halt(struct usb_ep *ep, int value) diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c index c4922b96c93b..9e5afdde1adb 100644 --- a/drivers/usb/renesas_usbhs/pipe.c +++ b/drivers/usb/renesas_usbhs/pipe.c @@ -277,6 +277,21 @@ int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe) return -EBUSY; } +bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe) +{ + u16 val; + + /* Do not support for DCP pipe */ + if (usbhs_pipe_is_dcp(pipe)) + return false; + + val = usbhsp_pipectrl_get(pipe); + if (val & INBUFM) + return true; + + return false; +} + /* * PID ctrl */ diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h index 3080423e600c..3b130529408b 100644 --- a/drivers/usb/renesas_usbhs/pipe.h +++ b/drivers/usb/renesas_usbhs/pipe.h @@ -83,6 +83,7 @@ void usbhs_pipe_clear(struct usbhs_pipe *pipe); void usbhs_pipe_clear_without_sequence(struct usbhs_pipe *pipe, int needs_bfre, int bfre_enable); int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe); +bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe); void usbhs_pipe_enable(struct usbhs_pipe *pipe); void usbhs_pipe_disable(struct usbhs_pipe *pipe); void usbhs_pipe_stall(struct usbhs_pipe *pipe); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index a3179fea38c8..8f066bb55d7d 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -314,10 +314,7 @@ static void serial_cleanup(struct tty_struct *tty) serial = port->serial; owner = serial->type->driver.owner; - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) - usb_autopm_put_interface(serial->interface); - mutex_unlock(&serial->disc_mutex); + usb_autopm_put_interface(serial->interface); usb_serial_put(serial); module_put(owner); diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 96562744101c..5f61d9977a15 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -4409,18 +4409,20 @@ static int tcpm_fw_get_caps(struct tcpm_port *port, /* USB data support is optional */ ret = fwnode_property_read_string(fwnode, "data-role", &cap_str); if (ret == 0) { - port->typec_caps.data = typec_find_port_data_role(cap_str); - if (port->typec_caps.data < 0) - return -EINVAL; + ret = typec_find_port_data_role(cap_str); + if (ret < 0) + return ret; + port->typec_caps.data = ret; } ret = fwnode_property_read_string(fwnode, "power-role", &cap_str); if (ret < 0) return ret; - port->typec_caps.type = typec_find_port_power_role(cap_str); - if (port->typec_caps.type < 0) - return -EINVAL; + ret = typec_find_port_power_role(cap_str); + if (ret < 0) + return ret; + port->typec_caps.type = ret; port->port_type = port->typec_caps.type; if (port->port_type == TYPEC_PORT_SNK) diff --git a/drivers/usb/typec/ucsi/displayport.c b/drivers/usb/typec/ucsi/displayport.c index 6c103697c582..d99700cb4dca 100644 --- a/drivers/usb/typec/ucsi/displayport.c +++ b/drivers/usb/typec/ucsi/displayport.c @@ -75,6 +75,8 @@ static int ucsi_displayport_enter(struct typec_altmode *alt) if (cur != 0xff) { mutex_unlock(&dp->con->lock); + if (dp->con->port_altmode[cur] == alt) + return 0; return -EBUSY; } diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c index 907e20e1a71e..d772fce51905 100644 --- a/drivers/usb/typec/ucsi/ucsi_ccg.c +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c @@ -195,7 +195,6 @@ struct ucsi_ccg { /* fw build with vendor information */ u16 fw_build; - bool run_isr; /* flag to call ISR routine during resume */ struct work_struct pm_work; }; @@ -224,18 +223,6 @@ static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len) if (quirks && quirks->max_read_len) max_read_len = quirks->max_read_len; - if (uc->fw_build == CCG_FW_BUILD_NVIDIA && - uc->fw_version <= CCG_OLD_FW_VERSION) { - mutex_lock(&uc->lock); - /* - * Do not schedule pm_work to run ISR in - * ucsi_ccg_runtime_resume() after pm_runtime_get_sync() - * since we are already in ISR path. - */ - uc->run_isr = false; - mutex_unlock(&uc->lock); - } - pm_runtime_get_sync(uc->dev); while (rem_len > 0) { msgs[1].buf = &data[len - rem_len]; @@ -278,18 +265,6 @@ static int ccg_write(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len) msgs[0].len = len + sizeof(rab); msgs[0].buf = buf; - if (uc->fw_build == CCG_FW_BUILD_NVIDIA && - uc->fw_version <= CCG_OLD_FW_VERSION) { - mutex_lock(&uc->lock); - /* - * Do not schedule pm_work to run ISR in - * ucsi_ccg_runtime_resume() after pm_runtime_get_sync() - * since we are already in ISR path. - */ - uc->run_isr = false; - mutex_unlock(&uc->lock); - } - pm_runtime_get_sync(uc->dev); status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); if (status < 0) { @@ -1130,7 +1105,6 @@ static int ucsi_ccg_probe(struct i2c_client *client, uc->ppm.sync = ucsi_ccg_sync; uc->dev = dev; uc->client = client; - uc->run_isr = true; mutex_init(&uc->lock); INIT_WORK(&uc->work, ccg_update_firmware); INIT_WORK(&uc->pm_work, ccg_pm_workaround_work); @@ -1188,6 +1162,8 @@ static int ucsi_ccg_probe(struct i2c_client *client, pm_runtime_set_active(uc->dev); pm_runtime_enable(uc->dev); + pm_runtime_use_autosuspend(uc->dev); + pm_runtime_set_autosuspend_delay(uc->dev, 5000); pm_runtime_idle(uc->dev); return 0; @@ -1229,7 +1205,6 @@ static int ucsi_ccg_runtime_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct ucsi_ccg *uc = i2c_get_clientdata(client); - bool schedule = true; /* * Firmware version 3.1.10 or earlier, built for NVIDIA has known issue @@ -1237,17 +1212,8 @@ static int ucsi_ccg_runtime_resume(struct device *dev) * Schedule a work to call ISR as a workaround. */ if (uc->fw_build == CCG_FW_BUILD_NVIDIA && - uc->fw_version <= CCG_OLD_FW_VERSION) { - mutex_lock(&uc->lock); - if (!uc->run_isr) { - uc->run_isr = true; - schedule = false; - } - mutex_unlock(&uc->lock); - - if (schedule) - schedule_work(&uc->pm_work); - } + uc->fw_version <= CCG_OLD_FW_VERSION) + schedule_work(&uc->pm_work); return 0; } diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index c31d17d05810..8001d6384c73 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -73,6 +73,7 @@ static void skel_delete(struct kref *kref) struct usb_skel *dev = to_skel_dev(kref); usb_free_urb(dev->bulk_in_urb); + usb_put_intf(dev->interface); usb_put_dev(dev->udev); kfree(dev->bulk_in_buffer); kfree(dev); @@ -124,10 +125,7 @@ static int skel_release(struct inode *inode, struct file *file) return -ENODEV; /* allow the device to be autosuspended */ - mutex_lock(&dev->io_mutex); - if (dev->interface) - usb_autopm_put_interface(dev->interface); - mutex_unlock(&dev->io_mutex); + usb_autopm_put_interface(dev->interface); /* decrement the count on our device */ kref_put(&dev->kref, skel_delete); @@ -507,7 +505,7 @@ static int skel_probe(struct usb_interface *interface, init_waitqueue_head(&dev->bulk_in_wait); dev->udev = usb_get_dev(interface_to_usbdev(interface)); - dev->interface = interface; + dev->interface = usb_get_intf(interface); /* set up the endpoint information */ /* use only the first bulk-in and bulk-out endpoints */ diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index 585a84d319bd..65850e9c7190 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -1195,12 +1195,12 @@ static int vhci_start(struct usb_hcd *hcd) if (id == 0 && usb_hcd_is_primary_hcd(hcd)) { err = vhci_init_attr_group(); if (err) { - pr_err("init attr group\n"); + dev_err(hcd_dev(hcd), "init attr group failed, err = %d\n", err); return err; } err = sysfs_create_group(&hcd_dev(hcd)->kobj, &vhci_attr_group); if (err) { - pr_err("create sysfs files\n"); + dev_err(hcd_dev(hcd), "create sysfs files failed, err = %d\n", err); vhci_finish_attr_group(); return err; } |