diff options
Diffstat (limited to 'drivers/usb')
44 files changed, 396 insertions, 160 deletions
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 0dd85d2635b9..47d06af33747 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -1131,7 +1131,10 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance, struct cxacru_data *instance; struct usb_device *usb_dev = interface_to_usbdev(intf); struct usb_host_endpoint *cmd_ep = usb_dev->ep_in[CXACRU_EP_CMD]; - struct usb_endpoint_descriptor *in, *out; + static const u8 ep_addrs[] = { + CXACRU_EP_CMD + USB_DIR_IN, + CXACRU_EP_CMD + USB_DIR_OUT, + 0}; int ret; /* instance init */ @@ -1179,13 +1182,11 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance, } if (usb_endpoint_xfer_int(&cmd_ep->desc)) - ret = usb_find_common_endpoints(intf->cur_altsetting, - NULL, NULL, &in, &out); + ret = usb_check_int_endpoints(intf, ep_addrs); else - ret = usb_find_common_endpoints(intf->cur_altsetting, - &in, &out, NULL, NULL); + ret = usb_check_bulk_endpoints(intf, ep_addrs); - if (ret) { + if (!ret) { usb_err(usbatm_instance, "cxacru_bind: interface has incorrect endpoints\n"); ret = -ENODEV; goto fail; diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c index c17516c29b63..a093544482d5 100644 --- a/drivers/usb/chipidea/otg_fsm.c +++ b/drivers/usb/chipidea/otg_fsm.c @@ -424,8 +424,7 @@ static enum hrtimer_restart ci_otg_hrtimer_func(struct hrtimer *t) /* Initialize timers */ static int ci_otg_init_timers(struct ci_hdrc *ci) { - hrtimer_init(&ci->otg_fsm_hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); - ci->otg_fsm_hrtimer.function = ci_otg_hrtimer_func; + hrtimer_setup(&ci->otg_fsm_hrtimer, ci_otg_hrtimer_func, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); return 0; } diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 6b37d1c47fce..c2ecfa3c8349 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -371,7 +371,7 @@ static void acm_process_notification(struct acm *acm, unsigned char *buf) static void acm_ctrl_irq(struct urb *urb) { struct acm *acm = urb->context; - struct usb_cdc_notification *dr = urb->transfer_buffer; + struct usb_cdc_notification *dr; unsigned int current_size = urb->actual_length; unsigned int expected_size, copy_size, alloc_size; int retval; @@ -398,14 +398,25 @@ static void acm_ctrl_irq(struct urb *urb) usb_mark_last_busy(acm->dev); - if (acm->nb_index) + if (acm->nb_index == 0) { + /* + * The first chunk of a message must contain at least the + * notification header with the length field, otherwise we + * can't get an expected_size. + */ + if (current_size < sizeof(struct usb_cdc_notification)) { + dev_dbg(&acm->control->dev, "urb too short\n"); + goto exit; + } + dr = urb->transfer_buffer; + } else { dr = (struct usb_cdc_notification *)acm->notification_buffer; - + } /* size = notification-header + (optional) data */ expected_size = sizeof(struct usb_cdc_notification) + le16_to_cpu(dr->wLength); - if (current_size < expected_size) { + if (acm->nb_index != 0 || current_size < expected_size) { /* notification is transmitted fragmented, reassemble */ if (acm->nb_size < expected_size) { u8 *new_buffer; @@ -1727,13 +1738,16 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, - { USB_DEVICE(0x045b, 0x023c), /* Renesas USB Download mode */ + { USB_DEVICE(0x045b, 0x023c), /* Renesas R-Car H3 USB Download mode */ + .driver_info = DISABLE_ECHO, /* Don't echo banner */ + }, + { USB_DEVICE(0x045b, 0x0247), /* Renesas R-Car D3 USB Download mode */ .driver_info = DISABLE_ECHO, /* Don't echo banner */ }, - { USB_DEVICE(0x045b, 0x0248), /* Renesas USB Download mode */ + { USB_DEVICE(0x045b, 0x0248), /* Renesas R-Car M3-N USB Download mode */ .driver_info = DISABLE_ECHO, /* Don't echo banner */ }, - { USB_DEVICE(0x045b, 0x024D), /* Renesas USB Download mode */ + { USB_DEVICE(0x045b, 0x024D), /* Renesas R-Car E3 USB Download mode */ .driver_info = DISABLE_ECHO, /* Don't echo banner */ }, { USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index c3f839637cb5..dcba4281ea48 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1849,6 +1849,17 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) hdev = interface_to_usbdev(intf); /* + * The USB 2.0 spec prohibits hubs from having more than one + * configuration or interface, and we rely on this prohibition. + * Refuse to accept a device that violates it. + */ + if (hdev->descriptor.bNumConfigurations > 1 || + hdev->actconfig->desc.bNumInterfaces > 1) { + dev_err(&intf->dev, "Invalid hub with more than one config or interface\n"); + return -EINVAL; + } + + /* * Set default autosuspend delay as 0 to speedup bus suspend, * based on the below considerations: * @@ -4698,7 +4709,6 @@ void usb_ep0_reinit(struct usb_device *udev) EXPORT_SYMBOL_GPL(usb_ep0_reinit); #define usb_sndaddr0pipe() (PIPE_CONTROL << 30) -#define usb_rcvaddr0pipe() ((PIPE_CONTROL << 30) | USB_DIR_IN) static int hub_set_address(struct usb_device *udev, int devnum) { @@ -4804,7 +4814,7 @@ static int get_bMaxPacketSize0(struct usb_device *udev, for (i = 0; i < GET_MAXPACKET0_TRIES; ++i) { /* Start with invalid values in case the transfer fails */ buf->bDescriptorType = buf->bMaxPacketSize0 = 0; - rc = usb_control_msg(udev, usb_rcvaddr0pipe(), + rc = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, USB_DT_DEVICE << 8, 0, buf, size, @@ -6056,6 +6066,36 @@ void usb_hub_cleanup(void) } /* usb_hub_cleanup() */ /** + * hub_hc_release_resources - clear resources used by host controller + * @udev: pointer to device being released + * + * Context: task context, might sleep + * + * Function releases the host controller resources in correct order before + * making any operation on resuming usb device. The host controller resources + * allocated for devices in tree should be released starting from the last + * usb device in tree toward the root hub. This function is used only during + * resuming device when usb device require reinitialization – that is, when + * flag udev->reset_resume is set. + * + * This call is synchronous, and may not be used in an interrupt context. + */ +static void hub_hc_release_resources(struct usb_device *udev) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(udev); + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + int i; + + /* Release up resources for all children before this device */ + for (i = 0; i < udev->maxchild; i++) + if (hub->ports[i]->child) + hub_hc_release_resources(hub->ports[i]->child); + + if (hcd->driver->reset_device) + hcd->driver->reset_device(hcd, udev); +} + +/** * usb_reset_and_verify_device - perform a USB port reset to reinitialize a device * @udev: device to reset (not in SUSPENDED or NOTATTACHED state) * @@ -6119,6 +6159,9 @@ static int usb_reset_and_verify_device(struct usb_device *udev) bos = udev->bos; udev->bos = NULL; + if (udev->reset_resume) + hub_hc_release_resources(udev); + mutex_lock(hcd->address0_mutex); for (i = 0; i < PORT_INIT_TRIES; ++i) { diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 67732c791c93..8efbacc5bc34 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -341,6 +341,10 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0638, 0x0a13), .driver_info = USB_QUIRK_STRING_FETCH_255 }, + /* Prolific Single-LUN Mass Storage Card Reader */ + { USB_DEVICE(0x067b, 0x2731), .driver_info = USB_QUIRK_DELAY_INIT | + USB_QUIRK_NO_LPM }, + /* Saitek Cyborg Gold Joystick */ { USB_DEVICE(0x06a3, 0x0006), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, @@ -435,6 +439,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0c45, 0x7056), .driver_info = USB_QUIRK_IGNORE_REMOTE_WAKEUP }, + /* Sony Xperia XZ1 Compact (lilac) smartphone in fastboot mode */ + { USB_DEVICE(0x0fce, 0x0dde), .driver_info = USB_QUIRK_NO_LPM }, + /* Action Semiconductor flash disk */ { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255 }, @@ -525,6 +532,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Blackmagic Design UltraStudio SDI */ { USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM }, + /* Teclast disk */ + { USB_DEVICE(0x1f75, 0x0917), .driver_info = USB_QUIRK_NO_LPM }, + /* Hauppauge HVR-950q */ { USB_DEVICE(0x2040, 0x7200), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index e7bf9cc635be..bd4c788f03bc 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -4615,6 +4615,7 @@ static int dwc2_hsotg_udc_stop(struct usb_gadget *gadget) spin_lock_irqsave(&hsotg->lock, flags); hsotg->driver = NULL; + hsotg->gadget.dev.of_node = NULL; hsotg->gadget.speed = USB_SPEED_UNKNOWN; hsotg->enabled = 0; diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c index 238c6fd50e75..2a542a99ec44 100644 --- a/drivers/usb/dwc2/hcd_queue.c +++ b/drivers/usb/dwc2/hcd_queue.c @@ -1459,8 +1459,7 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, /* Initialize QH */ qh->hsotg = hsotg; timer_setup(&qh->unreserve_timer, dwc2_unreserve_timer_fn, 0); - hrtimer_init(&qh->wait_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - qh->wait_timer.function = &dwc2_wait_timer_fn; + hrtimer_setup(&qh->wait_timer, &dwc2_wait_timer_fn, CLOCK_MONOTONIC, HRTIMER_MODE_REL); qh->ep_type = ep_type; qh->ep_is_in = ep_is_in; diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index dfa1b5fe48dc..66a08b527165 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -131,11 +131,24 @@ void dwc3_enable_susphy(struct dwc3 *dwc, bool enable) } } -void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode) +void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode, bool ignore_susphy) { + unsigned int hw_mode; u32 reg; reg = dwc3_readl(dwc->regs, DWC3_GCTL); + + /* + * For DRD controllers, GUSB3PIPECTL.SUSPENDENABLE and + * GUSB2PHYCFG.SUSPHY should be cleared during mode switching, + * and they can be set after core initialization. + */ + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && !ignore_susphy) { + if (DWC3_GCTL_PRTCAP(reg) != mode) + dwc3_enable_susphy(dwc, false); + } + reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)); reg |= DWC3_GCTL_PRTCAPDIR(mode); dwc3_writel(dwc->regs, DWC3_GCTL, reg); @@ -216,7 +229,7 @@ static void __dwc3_set_mode(struct work_struct *work) spin_lock_irqsave(&dwc->lock, flags); - dwc3_set_prtcap(dwc, desired_dr_role); + dwc3_set_prtcap(dwc, desired_dr_role, false); spin_unlock_irqrestore(&dwc->lock, flags); @@ -658,16 +671,7 @@ static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index) */ reg &= ~DWC3_GUSB3PIPECTL_UX_EXIT_PX; - /* - * Above DWC_usb3.0 1.94a, it is recommended to set - * DWC3_GUSB3PIPECTL_SUSPHY to '0' during coreConsultant configuration. - * So default value will be '0' when the core is reset. Application - * needs to set it to '1' after the core initialization is completed. - * - * Similarly for DRD controllers, GUSB3PIPECTL.SUSPENDENABLE must be - * cleared after power-on reset, and it can be set after core - * initialization. - */ + /* Ensure the GUSB3PIPECTL.SUSPENDENABLE is cleared prior to phy init. */ reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; if (dwc->u2ss_inp3_quirk) @@ -747,15 +751,7 @@ static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index) break; } - /* - * Above DWC_usb3.0 1.94a, it is recommended to set - * DWC3_GUSB2PHYCFG_SUSPHY to '0' during coreConsultant configuration. - * So default value will be '0' when the core is reset. Application - * needs to set it to '1' after the core initialization is completed. - * - * Similarly for DRD controllers, GUSB2PHYCFG.SUSPHY must be cleared - * after power-on reset, and it can be set after core initialization. - */ + /* Ensure the GUSB2PHYCFG.SUSPHY is cleared prior to phy init. */ reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; if (dwc->dis_enblslpm_quirk) @@ -830,6 +826,25 @@ static int dwc3_phy_init(struct dwc3 *dwc) goto err_exit_usb3_phy; } + /* + * Above DWC_usb3.0 1.94a, it is recommended to set + * DWC3_GUSB3PIPECTL_SUSPHY and DWC3_GUSB2PHYCFG_SUSPHY to '0' during + * coreConsultant configuration. So default value will be '0' when the + * core is reset. Application needs to set it to '1' after the core + * initialization is completed. + * + * Certain phy requires to be in P0 power state during initialization. + * Make sure GUSB3PIPECTL.SUSPENDENABLE and GUSB2PHYCFG.SUSPHY are clear + * prior to phy init to maintain in the P0 state. + * + * After phy initialization, some phy operations can only be executed + * while in lower P states. Ensure GUSB3PIPECTL.SUSPENDENABLE and + * GUSB2PHYCFG.SUSPHY are set soon after initialization to avoid + * blocking phy ops. + */ + if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) + dwc3_enable_susphy(dwc, true); + return 0; err_exit_usb3_phy: @@ -1588,7 +1603,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE); + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE, false); if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, false); @@ -1600,7 +1615,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) return dev_err_probe(dev, ret, "failed to initialize gadget\n"); break; case USB_DR_MODE_HOST: - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST, false); if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, true); @@ -1645,7 +1660,7 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) } /* de-assert DRVVBUS for HOST and OTG mode */ - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE); + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE, true); } static void dwc3_get_software_properties(struct dwc3 *dwc) @@ -1835,8 +1850,6 @@ static void dwc3_get_properties(struct dwc3 *dwc) dwc->tx_thr_num_pkt_prd = tx_thr_num_pkt_prd; dwc->tx_max_burst_prd = tx_max_burst_prd; - dwc->imod_interval = 0; - dwc->tx_fifo_resize_max_num = tx_fifo_resize_max_num; } @@ -1854,21 +1867,19 @@ static void dwc3_check_params(struct dwc3 *dwc) unsigned int hwparam_gen = DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3); - /* Check for proper value of imod_interval */ - if (dwc->imod_interval && !dwc3_has_imod(dwc)) { - dev_warn(dwc->dev, "Interrupt moderation not supported\n"); - dwc->imod_interval = 0; - } - /* + * Enable IMOD for all supporting controllers. + * + * Particularly, DWC_usb3 v3.00a must enable this feature for + * the following reason: + * * Workaround for STAR 9000961433 which affects only version * 3.00a of the DWC_usb3 core. This prevents the controller * interrupt from being masked while handling events. IMOD * allows us to work around this issue. Enable it for the * affected version. */ - if (!dwc->imod_interval && - DWC3_VER_IS(DWC3, 300A)) + if (dwc3_has_imod((dwc))) dwc->imod_interval = 1; /* Check the maximum_speed parameter */ @@ -2457,7 +2468,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) if (ret) return ret; - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE); + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE, true); dwc3_gadget_resume(dwc); break; case DWC3_GCTL_PRTCAP_HOST: @@ -2465,7 +2476,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) ret = dwc3_core_init_for_resume(dwc); if (ret) return ret; - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST, true); break; } /* Restore GUSB2PHYCFG bits that were modified in suspend */ @@ -2494,7 +2505,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) if (ret) return ret; - dwc3_set_prtcap(dwc, dwc->current_dr_role); + dwc3_set_prtcap(dwc, dwc->current_dr_role, true); dwc3_otg_init(dwc); if (dwc->current_otg_role == DWC3_OTG_ROLE_HOST) { diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index ac7c730f81ac..aaa39e663f60 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -717,6 +717,7 @@ struct dwc3_event_buffer { /** * struct dwc3_ep - device side endpoint representation * @endpoint: usb endpoint + * @nostream_work: work for handling bulk NoStream * @cancelled_list: list of cancelled requests for this endpoint * @pending_list: list of pending requests for this endpoint * @started_list: list of started requests on this endpoint @@ -1557,7 +1558,7 @@ struct dwc3_gadget_ep_cmd_params { #define DWC3_HAS_OTG BIT(3) /* prototypes */ -void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode); +void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode, bool ignore_susphy); void dwc3_set_mode(struct dwc3 *dwc, u32 mode); u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type); diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index d76ae676783c..7977860932b1 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -173,7 +173,7 @@ void dwc3_otg_init(struct dwc3 *dwc) * block "Initialize GCTL for OTG operation". */ /* GCTL.PrtCapDir=2'b11 */ - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_OTG); + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_OTG, true); /* GUSB2PHYCFG0.SusPHY=0 */ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; @@ -556,7 +556,7 @@ int dwc3_drd_init(struct dwc3 *dwc) dwc3_drd_update(dwc); } else { - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_OTG); + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_OTG, true); /* use OTG block to get ID event */ irq = dwc3_otg_get_irq(dwc); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index d27af65eb08a..89a4dc8ebf94 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2629,10 +2629,38 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on) { u32 reg; u32 timeout = 2000; + u32 saved_config = 0; if (pm_runtime_suspended(dwc->dev)) return 0; + /* + * When operating in USB 2.0 speeds (HS/FS), ensure that + * GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY are cleared before starting + * or stopping the controller. This resolves timeout issues that occur + * during frequent role switches between host and device modes. + * + * Save and clear these settings, then restore them after completing the + * controller start or stop sequence. + * + * This solution was discovered through experimentation as it is not + * mentioned in the dwc3 programming guide. It has been tested on an + * Exynos platforms. + */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + if (reg & DWC3_GUSB2PHYCFG_SUSPHY) { + saved_config |= DWC3_GUSB2PHYCFG_SUSPHY; + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + } + + if (reg & DWC3_GUSB2PHYCFG_ENBLSLPM) { + saved_config |= DWC3_GUSB2PHYCFG_ENBLSLPM; + reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; + } + + if (saved_config) + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + reg = dwc3_readl(dwc->regs, DWC3_DCTL); if (is_on) { if (DWC3_VER_IS_WITHIN(DWC3, ANY, 187A)) { @@ -2660,6 +2688,12 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on) reg &= DWC3_DSTS_DEVCTRLHLT; } while (--timeout && !(!is_on ^ !reg)); + if (saved_config) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + reg |= saved_config; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + } + if (!timeout) return -ETIMEDOUT; @@ -4467,14 +4501,18 @@ static irqreturn_t dwc3_process_event_buf(struct dwc3_event_buffer *evt) dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), DWC3_GEVNTSIZ_SIZE(evt->length)); + evt->flags &= ~DWC3_EVENT_PENDING; + /* + * Add an explicit write memory barrier to make sure that the update of + * clearing DWC3_EVENT_PENDING is observed in dwc3_check_event_buf() + */ + wmb(); + if (dwc->imod_interval) { dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), DWC3_GEVNTCOUNT_EHB); dwc3_writel(dwc->regs, DWC3_DEV_IMOD(0), dwc->imod_interval); } - /* Keep the clearing of DWC3_EVENT_PENDING at the end */ - evt->flags &= ~DWC3_EVENT_PENDING; - return ret; } diff --git a/drivers/usb/fotg210/fotg210-hcd.c b/drivers/usb/fotg210/fotg210-hcd.c index 3d404d19a205..64c4965a160f 100644 --- a/drivers/usb/fotg210/fotg210-hcd.c +++ b/drivers/usb/fotg210/fotg210-hcd.c @@ -4901,8 +4901,7 @@ static int hcd_fotg210_init(struct usb_hcd *hcd) */ fotg210->need_io_watchdog = 1; - hrtimer_init(&fotg210->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); - fotg210->hrtimer.function = fotg210_hrtimer_func; + hrtimer_setup(&fotg210->hrtimer, fotg210_hrtimer_func, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); fotg210->next_hrtimer_event = FOTG210_HRTIMER_NO_EVENT; hcc_params = fotg210_readl(fotg210, &fotg210->caps->hcc_params); diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index bdda8c74602d..869ad99afb48 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1050,10 +1050,11 @@ static int set_config(struct usb_composite_dev *cdev, else usb_gadget_set_remote_wakeup(gadget, 0); done: - if (power <= USB_SELF_POWER_VBUS_MAX_DRAW) - usb_gadget_set_selfpowered(gadget); - else + if (power > USB_SELF_POWER_VBUS_MAX_DRAW || + (c && !(c->bmAttributes & USB_CONFIG_ATT_SELFPOWER))) usb_gadget_clear_selfpowered(gadget); + else + usb_gadget_set_selfpowered(gadget); usb_gadget_vbus_draw(gadget, power); if (result >= 0 && cdev->delayed_status) @@ -2615,7 +2616,10 @@ void composite_suspend(struct usb_gadget *gadget) cdev->suspended = 1; - usb_gadget_set_selfpowered(gadget); + if (cdev->config && + cdev->config->bmAttributes & USB_CONFIG_ATT_SELFPOWER) + usb_gadget_set_selfpowered(gadget); + usb_gadget_vbus_draw(gadget, 2); } @@ -2649,8 +2653,11 @@ void composite_resume(struct usb_gadget *gadget) else maxpower = min(maxpower, 900U); - if (maxpower > USB_SELF_POWER_VBUS_MAX_DRAW) + if (maxpower > USB_SELF_POWER_VBUS_MAX_DRAW || + !(cdev->config->bmAttributes & USB_CONFIG_ATT_SELFPOWER)) usb_gadget_clear_selfpowered(gadget); + else + usb_gadget_set_selfpowered(gadget); usb_gadget_vbus_draw(gadget, maxpower); } else { diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c index 837fcdfa3840..da82598fcef8 100644 --- a/drivers/usb/gadget/function/f_midi.c +++ b/drivers/usb/gadget/function/f_midi.c @@ -283,7 +283,7 @@ f_midi_complete(struct usb_ep *ep, struct usb_request *req) /* Our transmit completed. See if there's more to go. * f_midi_transmit eats req, don't queue it again. */ req->length = 0; - f_midi_transmit(midi); + queue_work(system_highpri_wq, &midi->work); return; } break; @@ -907,6 +907,15 @@ static int f_midi_bind(struct usb_configuration *c, struct usb_function *f) status = -ENODEV; + /* + * Reset wMaxPacketSize with maximum packet size of FS bulk transfer before + * endpoint claim. This ensures that the wMaxPacketSize does not exceed the + * limit during bind retries where configured dwc3 TX/RX FIFO's maxpacket + * size of 512 bytes for IN/OUT endpoints in support HS speed only. + */ + bulk_in_desc.wMaxPacketSize = cpu_to_le16(64); + bulk_out_desc.wMaxPacketSize = cpu_to_le16(64); + /* allocate instance-specific endpoints */ midi->in_ep = usb_ep_autoconfig(cdev->gadget, &bulk_in_desc); if (!midi->in_ep) @@ -1000,11 +1009,11 @@ static int f_midi_bind(struct usb_configuration *c, struct usb_function *f) } /* configure the endpoint descriptors ... */ - ms_out_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->in_ports); - ms_out_desc.bNumEmbMIDIJack = midi->in_ports; + ms_out_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->out_ports); + ms_out_desc.bNumEmbMIDIJack = midi->out_ports; - ms_in_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->out_ports); - ms_in_desc.bNumEmbMIDIJack = midi->out_ports; + ms_in_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->in_ports); + ms_in_desc.bNumEmbMIDIJack = midi->in_ports; /* ... and add them to the list */ endpoint_descriptor_index = i; diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index f60576a65ca6..58b0dd575af3 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -1559,8 +1559,7 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f) ncm->port.open = ncm_open; ncm->port.close = ncm_close; - hrtimer_init(&ncm->task_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_SOFT); - ncm->task_timer.function = ncm_tx_timeout; + hrtimer_setup(&ncm->task_timer, ncm_tx_timeout, CLOCK_MONOTONIC, HRTIMER_MODE_REL_SOFT); DBG(cdev, "CDC Network: IN/%s OUT/%s NOTIFY/%s\n", ncm->port.in_ep->name, ncm->port.out_ep->name, diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index 09e2838917e2..f58590bf5e02 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -1052,8 +1052,8 @@ void gether_suspend(struct gether *link) * There is a transfer in progress. So we trigger a remote * wakeup to inform the host. */ - ether_wakeup_host(dev->port_usb); - return; + if (!ether_wakeup_host(dev->port_usb)) + return; } spin_lock_irqsave(&dev->lock, flags); link->is_suspend = true; diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c index 79e223713d8b..fb77b0b21790 100644 --- a/drivers/usb/gadget/function/uvc_video.c +++ b/drivers/usb/gadget/function/uvc_video.c @@ -818,7 +818,7 @@ int uvcg_video_init(struct uvc_video *video, struct uvc_device *uvc) return -EINVAL; /* Allocate a kthread for asynchronous hw submit handler. */ - video->kworker = kthread_create_worker(0, "UVCG"); + video->kworker = kthread_run_worker(0, "UVCG"); if (IS_ERR(video->kworker)) { uvcg_err(&video->uvc->func, "failed to create UVCG kworker\n"); return PTR_ERR(video->kworker); diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index a6f46364be65..4b3d5075621a 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -1543,8 +1543,8 @@ void usb_del_gadget(struct usb_gadget *gadget) kobject_uevent(&udc->dev.kobj, KOBJ_REMOVE); sysfs_remove_link(&udc->dev.kobj, "gadget"); - flush_work(&gadget->work); device_del(&gadget->dev); + flush_work(&gadget->work); ida_free(&gadget_id_numbers, gadget->id_number); cancel_work_sync(&udc->vbus_work); device_unregister(&udc->dev); diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index bda08c5ba7c0..4f1b5db51dda 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -2479,8 +2479,7 @@ static DEVICE_ATTR_RO(urbs); static int dummy_start_ss(struct dummy_hcd *dum_hcd) { - hrtimer_init(&dum_hcd->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_SOFT); - dum_hcd->timer.function = dummy_timer; + hrtimer_setup(&dum_hcd->timer, dummy_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_SOFT); dum_hcd->rh_state = DUMMY_RH_RUNNING; dum_hcd->stream_en_ep = 0; INIT_LIST_HEAD(&dum_hcd->urbp_list); @@ -2509,8 +2508,7 @@ static int dummy_start(struct usb_hcd *hcd) return dummy_start_ss(dum_hcd); spin_lock_init(&dum_hcd->dum->lock); - hrtimer_init(&dum_hcd->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_SOFT); - dum_hcd->timer.function = dummy_timer; + hrtimer_setup(&dum_hcd->timer, dummy_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_SOFT); dum_hcd->rh_state = DUMMY_RH_RUNNING; INIT_LIST_HEAD(&dum_hcd->urbp_list); diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index fce5c41d9f29..89b304cf6d03 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -310,7 +310,7 @@ struct renesas_usb3_request { struct list_head queue; }; -#define USB3_EP_NAME_SIZE 8 +#define USB3_EP_NAME_SIZE 16 struct renesas_usb3_ep { struct usb_ep ep; struct renesas_usb3 *usb3; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 6de79ac5e6a4..6d1d190c914d 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -466,8 +466,7 @@ static int ehci_init(struct usb_hcd *hcd) */ ehci->need_io_watchdog = 1; - hrtimer_init(&ehci->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); - ehci->hrtimer.function = ehci_hrtimer_func; + hrtimer_setup(&ehci->hrtimer, ehci_hrtimer_func, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); ehci->next_hrtimer_event = EHCI_HRTIMER_NO_EVENT; hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params); diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 1f9c1b1435d8..0404489c2f6a 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -958,6 +958,15 @@ static void quirk_usb_disable_ehci(struct pci_dev *pdev) * booting from USB disk or using a usb keyboard */ hcc_params = readl(base + EHCI_HCC_PARAMS); + + /* LS7A EHCI controller doesn't have extended capabilities, the + * EECP (EHCI Extended Capabilities Pointer) field of HCCPARAMS + * register should be 0x0 but it reads as 0xa0. So clear it to + * avoid error messages on boot. + */ + if (pdev->vendor == PCI_VENDOR_ID_LOONGSON && pdev->device == 0x7a14) + hcc_params &= ~(0xffL << 8); + offset = (hcc_params >> 8) & 0xff; while (offset && --count) { pci_read_config_dword(pdev, offset, &cap); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 9693464c0520..69c278b64084 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -12,6 +12,7 @@ #include <linux/slab.h> #include <linux/unaligned.h> #include <linux/bitfield.h> +#include <linux/pci.h> #include "xhci.h" #include "xhci-trace.h" @@ -770,9 +771,16 @@ static int xhci_exit_test_mode(struct xhci_hcd *xhci) enum usb_link_tunnel_mode xhci_port_is_tunneled(struct xhci_hcd *xhci, struct xhci_port *port) { + struct usb_hcd *hcd; void __iomem *base; u32 offset; + /* Don't try and probe this capability for non-Intel hosts */ + hcd = xhci_to_hcd(xhci); + if (!dev_is_pci(hcd->self.controller) || + to_pci_dev(hcd->self.controller)->vendor != PCI_VENDOR_ID_INTEL) + return USB_LINK_UNKNOWN; + base = &xhci->cap_regs->hc_capbase; offset = xhci_find_next_ext_cap(base, 0, XHCI_EXT_CAPS_INTEL_SPR_SHADOW); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 92703efda1f7..fdf0c1008225 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -2437,7 +2437,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) * and our use of dma addresses in the trb_address_map radix tree needs * TRB_SEGMENT_SIZE alignment, so we pick the greater alignment need. */ - if (xhci->quirks & XHCI_ZHAOXIN_TRB_FETCH) + if (xhci->quirks & XHCI_TRB_OVERFETCH) + /* Buggy HC prefetches beyond segment bounds - allocate dummy space at the end */ xhci->segment_pool = dma_pool_create("xHCI ring segments", dev, TRB_SEGMENT_SIZE * 2, TRB_SEGMENT_SIZE * 2, xhci->page_size * 2); else diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 2d1e205c14c6..54460d11f7ee 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -38,6 +38,8 @@ #define PCI_DEVICE_ID_ETRON_EJ168 0x7023 #define PCI_DEVICE_ID_ETRON_EJ188 0x7052 +#define PCI_DEVICE_ID_VIA_VL805 0x3483 + #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI 0x9cb1 @@ -418,8 +420,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == 0x3432) xhci->quirks |= XHCI_BROKEN_STREAMS; - if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) + if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == PCI_DEVICE_ID_VIA_VL805) { xhci->quirks |= XHCI_LPM_SUPPORT; + xhci->quirks |= XHCI_TRB_OVERFETCH; + } if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) { @@ -467,11 +471,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->device == 0x9202) { xhci->quirks |= XHCI_RESET_ON_RESUME; - xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH; + xhci->quirks |= XHCI_TRB_OVERFETCH; } if (pdev->device == 0x9203) - xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH; + xhci->quirks |= XHCI_TRB_OVERFETCH; } if (pdev->vendor == PCI_VENDOR_ID_CDNS && @@ -653,8 +657,8 @@ put_runtime_pm: } EXPORT_SYMBOL_NS_GPL(xhci_pci_common_probe, "xhci"); -static const struct pci_device_id pci_ids_reject[] = { - /* handled by xhci-pci-renesas */ +/* handled by xhci-pci-renesas if enabled */ +static const struct pci_device_id pci_ids_renesas[] = { { PCI_DEVICE(PCI_VENDOR_ID_RENESAS, 0x0014) }, { PCI_DEVICE(PCI_VENDOR_ID_RENESAS, 0x0015) }, { /* end: all zeroes */ } @@ -662,7 +666,8 @@ static const struct pci_device_id pci_ids_reject[] = { static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { - if (pci_match_id(pci_ids_reject, dev)) + if (IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS) && + pci_match_id(pci_ids_renesas, dev)) return -ENODEV; return xhci_pci_common_probe(dev, id); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 45653114ccd7..1a90ebc8a30e 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -780,8 +780,12 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci) struct xhci_segment *seg; ring = xhci->cmd_ring; - xhci_for_each_ring_seg(ring->first_seg, seg) + xhci_for_each_ring_seg(ring->first_seg, seg) { + /* erase all TRBs before the link */ memset(seg->trbs, 0, sizeof(union xhci_trb) * (TRBS_PER_SEGMENT - 1)); + /* clear link cycle bit */ + seg->trbs[TRBS_PER_SEGMENT - 1].link.control &= cpu_to_le32(~TRB_CYCLE); + } xhci_initialize_ring_info(ring); /* diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 8c164340a2c3..779b01dee068 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1632,7 +1632,7 @@ struct xhci_hcd { #define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42) #define XHCI_SUSPEND_RESUME_CLKS BIT_ULL(43) #define XHCI_RESET_TO_DEFAULT BIT_ULL(44) -#define XHCI_ZHAOXIN_TRB_FETCH BIT_ULL(45) +#define XHCI_TRB_OVERFETCH BIT_ULL(45) #define XHCI_ZHAOXIN_HOST BIT_ULL(46) #define XHCI_WRITE_64_HI_LO BIT_ULL(47) #define XHCI_CDNS_SCTX_QUIRK BIT_ULL(48) diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index 9589243e8951..4cde3abb7006 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -760,8 +760,8 @@ cppi41_dma_controller_create(struct musb *musb, void __iomem *base) if (!controller) goto kzalloc_fail; - hrtimer_init(&controller->early_tx, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - controller->early_tx.function = cppi41_recheck_tx_req; + hrtimer_setup(&controller->early_tx, cppi41_recheck_tx_req, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); INIT_LIST_HEAD(&controller->early_tx_list); controller->controller.channel_alloc = cppi41_dma_channel_allocate; diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 6c3ececf9137..8423be59ec0f 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -212,7 +212,7 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop) if (of_property_read_u32(node, "clock-frequency", &clk_rate)) clk_rate = 0; - needs_clk = of_property_read_bool(node, "clocks"); + needs_clk = of_property_present(node, "clocks"); } nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS); diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 935fc496fe94..4b35ef216125 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -312,8 +312,10 @@ static int usbhsc_clk_get(struct device *dev, struct usbhs_priv *priv) priv->clks[1] = of_clk_get(dev_of_node(dev), 1); if (PTR_ERR(priv->clks[1]) == -ENOENT) priv->clks[1] = NULL; - else if (IS_ERR(priv->clks[1])) + else if (IS_ERR(priv->clks[1])) { + clk_put(priv->clks[0]); return PTR_ERR(priv->clks[1]); + } return 0; } @@ -779,6 +781,8 @@ static void usbhs_remove(struct platform_device *pdev) dev_dbg(&pdev->dev, "usb remove\n"); + flush_delayed_work(&priv->notify_hotplug_work); + /* power off */ if (!usbhs_get_dparam(priv, runtime_pwctrl)) usbhsc_power_ctrl(priv, 0); diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 105132ae87ac..e8e5723f5412 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -1094,7 +1094,7 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) goto usbhs_mod_gadget_probe_err_gpriv; } - gpriv->transceiver = usb_get_phy(USB_PHY_TYPE_UNDEFINED); + gpriv->transceiver = devm_usb_get_phy(dev, USB_PHY_TYPE_UNDEFINED); dev_info(dev, "%stransceiver found\n", !IS_ERR(gpriv->transceiver) ? "" : "no "); diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c index c58a12c147f4..30482d4cf826 100644 --- a/drivers/usb/roles/class.c +++ b/drivers/usb/roles/class.c @@ -387,8 +387,11 @@ usb_role_switch_register(struct device *parent, dev_set_name(&sw->dev, "%s-role-switch", desc->name ? desc->name : dev_name(parent)); + sw->registered = true; + ret = device_register(&sw->dev); if (ret) { + sw->registered = false; put_device(&sw->dev); return ERR_PTR(ret); } @@ -399,8 +402,6 @@ usb_role_switch_register(struct device *parent, dev_warn(&sw->dev, "failed to add component\n"); } - sw->registered = true; - /* TODO: Symlinks for the host port and the device controller. */ return sw; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index e07c5e3eb18c..9b34e23b7091 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1079,6 +1079,20 @@ static const struct usb_device_id id_table_combined[] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, /* GMC devices */ { USB_DEVICE(GMC_VID, GMC_Z216C_PID) }, + /* Altera USB Blaster 3 */ + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6022_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6025_PID, 2) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6026_PID, 2) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6026_PID, 3) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6029_PID, 2) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602A_PID, 2) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602A_PID, 3) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602C_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602D_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602D_PID, 2) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 2) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 3) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 5ee60ba2a73c..52be47d684ea 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1612,3 +1612,16 @@ */ #define GMC_VID 0x1cd7 #define GMC_Z216C_PID 0x0217 /* GMC Z216C Adapter IR-USB */ + +/* + * Altera USB Blaster 3 (http://www.altera.com). + */ +#define ALTERA_VID 0x09fb +#define ALTERA_UB3_6022_PID 0x6022 +#define ALTERA_UB3_6025_PID 0x6025 +#define ALTERA_UB3_6026_PID 0x6026 +#define ALTERA_UB3_6029_PID 0x6029 +#define ALTERA_UB3_602A_PID 0x602a +#define ALTERA_UB3_602C_PID 0x602c +#define ALTERA_UB3_602D_PID 0x602d +#define ALTERA_UB3_602E_PID 0x602e diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 1e2ae0c6c41c..5cd26dac2069 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -619,15 +619,6 @@ static void option_instat_callback(struct urb *urb); /* Luat Air72*U series based on UNISOC UIS8910 uses UNISOC's vendor ID */ #define LUAT_PRODUCT_AIR720U 0x4e00 -/* MeiG Smart Technology products */ -#define MEIGSMART_VENDOR_ID 0x2dee -/* MeiG Smart SRM815/SRM825L based on Qualcomm 315 */ -#define MEIGSMART_PRODUCT_SRM825L 0x4d22 -/* MeiG Smart SLM320 based on UNISOC UIS8910 */ -#define MEIGSMART_PRODUCT_SLM320 0x4d41 -/* MeiG Smart SLM770A based on ASR1803 */ -#define MEIGSMART_PRODUCT_SLM770A 0x4d57 - /* Device flags */ /* Highest interface number which can be used with NCTRL() and RSVD() */ @@ -1367,23 +1358,23 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(2) | RSVD(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1063, 0xff), /* Telit LN920 (ECM) */ .driver_info = NCTRL(0) | RSVD(1) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1070, 0xff), /* Telit FN990 (rmnet) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1070, 0xff), /* Telit FN990A (rmnet) */ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1071, 0xff), /* Telit FN990 (MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1071, 0xff), /* Telit FN990A (MBIM) */ .driver_info = NCTRL(0) | RSVD(1) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1072, 0xff), /* Telit FN990 (RNDIS) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1072, 0xff), /* Telit FN990A (RNDIS) */ .driver_info = NCTRL(2) | RSVD(3) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff), /* Telit FN990 (ECM) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff), /* Telit FN990A (ECM) */ .driver_info = NCTRL(0) | RSVD(1) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff), /* Telit FN990 (PCIe) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff), /* Telit FN990A (PCIe) */ .driver_info = RSVD(0) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1080, 0xff), /* Telit FE990 (rmnet) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1080, 0xff), /* Telit FE990A (rmnet) */ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1081, 0xff), /* Telit FE990 (MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1081, 0xff), /* Telit FE990A (MBIM) */ .driver_info = NCTRL(0) | RSVD(1) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1082, 0xff), /* Telit FE990 (RNDIS) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1082, 0xff), /* Telit FE990A (RNDIS) */ .driver_info = NCTRL(2) | RSVD(3) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff), /* Telit FE990 (ECM) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff), /* Telit FE990A (ECM) */ .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a0, 0xff), /* Telit FN20C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(3) }, @@ -1397,12 +1388,44 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10aa, 0xff), /* Telit FN920C04 (MBIM) */ .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b0, 0xff, 0xff, 0x30), /* Telit FE990B (rmnet) */ + .driver_info = NCTRL(5) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b0, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b0, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b1, 0xff, 0xff, 0x30), /* Telit FE990B (MBIM) */ + .driver_info = NCTRL(6) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b1, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b1, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b2, 0xff, 0xff, 0x30), /* Telit FE990B (RNDIS) */ + .driver_info = NCTRL(6) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b2, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b2, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x30), /* Telit FE990B (ECM) */ + .driver_info = NCTRL(6) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x60) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c0, 0xff), /* Telit FE910C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c4, 0xff), /* Telit FE910C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c8, 0xff), /* Telit FE910C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x30), /* Telit FN990B (rmnet) */ + .driver_info = NCTRL(5) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x30), /* Telit FN990B (MBIM) */ + .driver_info = NCTRL(6) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d2, 0xff, 0xff, 0x30), /* Telit FN990B (RNDIS) */ + .driver_info = NCTRL(6) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d2, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d2, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d3, 0xff, 0xff, 0x30), /* Telit FN990B (ECM) */ + .driver_info = NCTRL(6) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d3, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d3, 0xff, 0xff, 0x60) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), @@ -2347,6 +2370,14 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a05, 0xff) }, /* Fibocom FM650-CN (NCM mode) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a06, 0xff) }, /* Fibocom FM650-CN (RNDIS mode) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a07, 0xff) }, /* Fibocom FM650-CN (MBIM mode) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d41, 0xff, 0, 0) }, /* MeiG Smart SLM320 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d57, 0xff, 0, 0) }, /* MeiG Smart SLM770A */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d22, 0xff, 0, 0) }, /* MeiG Smart SRM815 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d22, 0xff, 0x10, 0x02) }, /* MeiG Smart SLM828 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d22, 0xff, 0x10, 0x03) }, /* MeiG Smart SLM828 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d22, 0xff, 0xff, 0x30) }, /* MeiG Smart SRM815 and SRM825L */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d22, 0xff, 0xff, 0x40) }, /* MeiG Smart SRM825L */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d22, 0xff, 0xff, 0x60) }, /* MeiG Smart SRM825L */ { USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ @@ -2403,12 +2434,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, LUAT_PRODUCT_AIR720U, 0xff, 0, 0) }, - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SLM320, 0xff, 0, 0) }, - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SLM770A, 0xff, 0, 0) }, - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0, 0) }, - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x30) }, - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x40) }, - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x60) }, { USB_DEVICE_INTERFACE_CLASS(0x1bbb, 0x0530, 0xff), /* TCL IK512 MBIM */ .driver_info = NCTRL(1) }, { USB_DEVICE_INTERFACE_CLASS(0x1bbb, 0x0640, 0xff), /* TCL IK512 ECM */ diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c index 64f6dd0dc660..88c50b984e8a 100644 --- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c +++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c @@ -334,6 +334,11 @@ static int rt1711h_probe(struct i2c_client *client) { int ret; struct rt1711h_chip *chip; + const u16 alert_mask = TCPC_ALERT_TX_SUCCESS | TCPC_ALERT_TX_DISCARDED | + TCPC_ALERT_TX_FAILED | TCPC_ALERT_RX_HARD_RST | + TCPC_ALERT_RX_STATUS | TCPC_ALERT_POWER_STATUS | + TCPC_ALERT_CC_STATUS | TCPC_ALERT_RX_BUF_OVF | + TCPC_ALERT_FAULT; chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); if (!chip) @@ -382,6 +387,12 @@ static int rt1711h_probe(struct i2c_client *client) dev_name(chip->dev), chip); if (ret < 0) return ret; + + /* Enable alert interrupts */ + ret = rt1711h_write16(chip, TCPC_ALERT_MASK, alert_mask); + if (ret < 0) + return ret; + enable_irq_wake(client->irq); return 0; diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 47be450d2be3..a99db4e025cd 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -5117,16 +5117,16 @@ static void run_state_machine(struct tcpm_port *port) */ if (port->vbus_never_low) { port->vbus_never_low = false; - tcpm_set_state(port, SNK_SOFT_RESET, - port->timings.sink_wait_cap_time); + upcoming_state = SNK_SOFT_RESET; } else { if (!port->self_powered) upcoming_state = SNK_WAIT_CAPABILITIES_TIMEOUT; else upcoming_state = hard_reset_state(port); - tcpm_set_state(port, SNK_WAIT_CAPABILITIES_TIMEOUT, - port->timings.sink_wait_cap_time); } + + tcpm_set_state(port, upcoming_state, + port->timings.sink_wait_cap_time); break; case SNK_WAIT_CAPABILITIES_TIMEOUT: /* @@ -5591,8 +5591,7 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, port->pps_data.active, 0); tcpm_set_charge(port, false); - tcpm_set_state(port, hard_reset_state(port), - port->timings.ps_src_off_time); + tcpm_set_state(port, ERROR_RECOVERY, port->timings.ps_src_off_time); break; case PR_SWAP_SNK_SRC_SOURCE_ON: tcpm_enable_auto_vbus_discharge(port, true); @@ -7722,14 +7721,14 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) kthread_init_work(&port->event_work, tcpm_pd_event_handler); kthread_init_work(&port->enable_frs, tcpm_enable_frs_work); kthread_init_work(&port->send_discover_work, tcpm_send_discover_work); - hrtimer_init(&port->state_machine_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - port->state_machine_timer.function = state_machine_timer_handler; - hrtimer_init(&port->vdm_state_machine_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - port->vdm_state_machine_timer.function = vdm_state_machine_timer_handler; - hrtimer_init(&port->enable_frs_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - port->enable_frs_timer.function = enable_frs_timer_handler; - hrtimer_init(&port->send_discover_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - port->send_discover_timer.function = send_discover_timer_handler; + hrtimer_setup(&port->state_machine_timer, state_machine_timer_handler, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + hrtimer_setup(&port->vdm_state_machine_timer, vdm_state_machine_timer_handler, + CLOCK_MONOTONIC, HRTIMER_MODE_REL); + hrtimer_setup(&port->enable_frs_timer, enable_frs_timer_handler, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + hrtimer_setup(&port->send_discover_timer, send_discover_timer_handler, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); spin_lock_init(&port->pd_event_lock); diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c index fcf499cc9458..2a2915b0a645 100644 --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -25,7 +25,7 @@ * difficult to estimate the time it takes for the system to process the command * before it is actually passed to the PPM. */ -#define UCSI_TIMEOUT_MS 5000 +#define UCSI_TIMEOUT_MS 10000 /* * UCSI_SWAP_TIMEOUT_MS - Timeout for role swap requests @@ -1346,7 +1346,7 @@ static int ucsi_reset_ppm(struct ucsi *ucsi) mutex_lock(&ucsi->ppm_lock); - ret = ucsi->ops->read_cci(ucsi, &cci); + ret = ucsi->ops->poll_cci(ucsi, &cci); if (ret < 0) goto out; @@ -1364,7 +1364,7 @@ static int ucsi_reset_ppm(struct ucsi *ucsi) tmo = jiffies + msecs_to_jiffies(UCSI_TIMEOUT_MS); do { - ret = ucsi->ops->read_cci(ucsi, &cci); + ret = ucsi->ops->poll_cci(ucsi, &cci); if (ret < 0) goto out; if (cci & UCSI_CCI_COMMAND_COMPLETE) @@ -1393,7 +1393,7 @@ static int ucsi_reset_ppm(struct ucsi *ucsi) /* Give the PPM time to process a reset before reading CCI */ msleep(20); - ret = ucsi->ops->read_cci(ucsi, &cci); + ret = ucsi->ops->poll_cci(ucsi, &cci); if (ret) goto out; @@ -1825,11 +1825,11 @@ static int ucsi_init(struct ucsi *ucsi) err_unregister: for (con = connector; con->port; con++) { + if (con->wq) + destroy_workqueue(con->wq); ucsi_unregister_partner(con); ucsi_unregister_altmodes(con, UCSI_RECIPIENT_CON); ucsi_unregister_port_psy(con); - if (con->wq) - destroy_workqueue(con->wq); usb_power_delivery_unregister_capabilities(con->port_sink_caps); con->port_sink_caps = NULL; @@ -1929,8 +1929,8 @@ struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops) struct ucsi *ucsi; if (!ops || - !ops->read_version || !ops->read_cci || !ops->read_message_in || - !ops->sync_control || !ops->async_control) + !ops->read_version || !ops->read_cci || !ops->poll_cci || + !ops->read_message_in || !ops->sync_control || !ops->async_control) return ERR_PTR(-EINVAL); ucsi = kzalloc(sizeof(*ucsi), GFP_KERNEL); @@ -2013,10 +2013,6 @@ void ucsi_unregister(struct ucsi *ucsi) for (i = 0; i < ucsi->cap.num_connectors; i++) { cancel_work_sync(&ucsi->connector[i].work); - ucsi_unregister_partner(&ucsi->connector[i]); - ucsi_unregister_altmodes(&ucsi->connector[i], - UCSI_RECIPIENT_CON); - ucsi_unregister_port_psy(&ucsi->connector[i]); if (ucsi->connector[i].wq) { struct ucsi_work *uwork; @@ -2032,6 +2028,11 @@ void ucsi_unregister(struct ucsi *ucsi) destroy_workqueue(ucsi->connector[i].wq); } + ucsi_unregister_partner(&ucsi->connector[i]); + ucsi_unregister_altmodes(&ucsi->connector[i], + UCSI_RECIPIENT_CON); + ucsi_unregister_port_psy(&ucsi->connector[i]); + usb_power_delivery_unregister_capabilities(ucsi->connector[i].port_sink_caps); ucsi->connector[i].port_sink_caps = NULL; usb_power_delivery_unregister_capabilities(ucsi->connector[i].port_source_caps); diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h index 82735eb34f0e..28780acc4af2 100644 --- a/drivers/usb/typec/ucsi/ucsi.h +++ b/drivers/usb/typec/ucsi/ucsi.h @@ -62,6 +62,7 @@ struct dentry; * struct ucsi_operations - UCSI I/O operations * @read_version: Read implemented UCSI version * @read_cci: Read CCI register + * @poll_cci: Read CCI register while polling with notifications disabled * @read_message_in: Read message data from UCSI * @sync_control: Blocking control operation * @async_control: Non-blocking control operation @@ -76,6 +77,7 @@ struct dentry; struct ucsi_operations { int (*read_version)(struct ucsi *ucsi, u16 *version); int (*read_cci)(struct ucsi *ucsi, u32 *cci); + int (*poll_cci)(struct ucsi *ucsi, u32 *cci); int (*read_message_in)(struct ucsi *ucsi, void *val, size_t val_len); int (*sync_control)(struct ucsi *ucsi, u64 command); int (*async_control)(struct ucsi *ucsi, u64 command); diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c index 5c5515551963..ac1ebb5d9527 100644 --- a/drivers/usb/typec/ucsi/ucsi_acpi.c +++ b/drivers/usb/typec/ucsi/ucsi_acpi.c @@ -59,19 +59,24 @@ static int ucsi_acpi_read_version(struct ucsi *ucsi, u16 *version) static int ucsi_acpi_read_cci(struct ucsi *ucsi, u32 *cci) { struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi); - int ret; - - if (UCSI_COMMAND(ua->cmd) == UCSI_PPM_RESET) { - ret = ucsi_acpi_dsm(ua, UCSI_DSM_FUNC_READ); - if (ret) - return ret; - } memcpy(cci, ua->base + UCSI_CCI, sizeof(*cci)); return 0; } +static int ucsi_acpi_poll_cci(struct ucsi *ucsi, u32 *cci) +{ + struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi); + int ret; + + ret = ucsi_acpi_dsm(ua, UCSI_DSM_FUNC_READ); + if (ret) + return ret; + + return ucsi_acpi_read_cci(ucsi, cci); +} + static int ucsi_acpi_read_message_in(struct ucsi *ucsi, void *val, size_t val_len) { struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi); @@ -94,6 +99,7 @@ static int ucsi_acpi_async_control(struct ucsi *ucsi, u64 command) static const struct ucsi_operations ucsi_acpi_ops = { .read_version = ucsi_acpi_read_version, .read_cci = ucsi_acpi_read_cci, + .poll_cci = ucsi_acpi_poll_cci, .read_message_in = ucsi_acpi_read_message_in, .sync_control = ucsi_sync_control_common, .async_control = ucsi_acpi_async_control @@ -142,6 +148,7 @@ static int ucsi_gram_sync_control(struct ucsi *ucsi, u64 command) static const struct ucsi_operations ucsi_gram_ops = { .read_version = ucsi_acpi_read_version, .read_cci = ucsi_acpi_read_cci, + .poll_cci = ucsi_acpi_poll_cci, .read_message_in = ucsi_gram_read_message_in, .sync_control = ucsi_gram_sync_control, .async_control = ucsi_acpi_async_control diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c index 740171f24ef9..4b1668733a4b 100644 --- a/drivers/usb/typec/ucsi/ucsi_ccg.c +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c @@ -664,6 +664,7 @@ err_put: static const struct ucsi_operations ucsi_ccg_ops = { .read_version = ucsi_ccg_read_version, .read_cci = ucsi_ccg_read_cci, + .poll_cci = ucsi_ccg_read_cci, .read_message_in = ucsi_ccg_read_message_in, .sync_control = ucsi_ccg_sync_control, .async_control = ucsi_ccg_async_control, diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c index fed39d458090..8af79101a2fc 100644 --- a/drivers/usb/typec/ucsi/ucsi_glink.c +++ b/drivers/usb/typec/ucsi/ucsi_glink.c @@ -206,6 +206,7 @@ static void pmic_glink_ucsi_connector_status(struct ucsi_connector *con) static const struct ucsi_operations pmic_glink_ucsi_ops = { .read_version = pmic_glink_ucsi_read_version, .read_cci = pmic_glink_ucsi_read_cci, + .poll_cci = pmic_glink_ucsi_read_cci, .read_message_in = pmic_glink_ucsi_read_message_in, .sync_control = ucsi_sync_control_common, .async_control = pmic_glink_ucsi_async_control, diff --git a/drivers/usb/typec/ucsi/ucsi_stm32g0.c b/drivers/usb/typec/ucsi/ucsi_stm32g0.c index 6923fad31d79..57ef7d83a412 100644 --- a/drivers/usb/typec/ucsi/ucsi_stm32g0.c +++ b/drivers/usb/typec/ucsi/ucsi_stm32g0.c @@ -424,6 +424,7 @@ static irqreturn_t ucsi_stm32g0_irq_handler(int irq, void *data) static const struct ucsi_operations ucsi_stm32g0_ops = { .read_version = ucsi_stm32g0_read_version, .read_cci = ucsi_stm32g0_read_cci, + .poll_cci = ucsi_stm32g0_read_cci, .read_message_in = ucsi_stm32g0_read_message_in, .sync_control = ucsi_sync_control_common, .async_control = ucsi_stm32g0_async_control, diff --git a/drivers/usb/typec/ucsi/ucsi_yoga_c630.c b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c index 4cae85c0dc12..d33e3f2dd1d8 100644 --- a/drivers/usb/typec/ucsi/ucsi_yoga_c630.c +++ b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c @@ -74,6 +74,7 @@ static int yoga_c630_ucsi_async_control(struct ucsi *ucsi, u64 command) static const struct ucsi_operations yoga_c630_ucsi_ops = { .read_version = yoga_c630_ucsi_read_version, .read_cci = yoga_c630_ucsi_read_cci, + .poll_cci = yoga_c630_ucsi_read_cci, .read_message_in = yoga_c630_ucsi_read_message_in, .sync_control = ucsi_sync_control_common, .async_control = yoga_c630_ucsi_async_control, |