3 files changed, 58 insertions, 61 deletions

diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 3e4bc699bc0f..68f9f3cecf7a 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -315,13 +315,13 @@ static void pm_dev_err(struct device *dev, pm_message_t state, char *info,
 /*------------------------- Resume routines -------------------------*/
 
 /**
- *	resume_device_noirq - Power on one device (early resume).
+ *	device_resume_noirq - Power on one device (early resume).
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  *
  *	Must be called with interrupts disabled.
  */
-static int resume_device_noirq(struct device *dev, pm_message_t state)
+static int device_resume_noirq(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -334,9 +334,6 @@ static int resume_device_noirq(struct device *dev, pm_message_t state)
 	if (dev->bus->pm) {
 		pm_dev_dbg(dev, state, "EARLY ");
 		error = pm_noirq_op(dev, dev->bus->pm, state);
-	} else if (dev->bus->resume_early) {
-		pm_dev_dbg(dev, state, "legacy EARLY ");
-		error = dev->bus->resume_early(dev);
 	}
  End:
 	TRACE_RESUME(error);
@@ -344,16 +341,16 @@ static int resume_device_noirq(struct device *dev, pm_message_t state)
 }
 
 /**
- *	dpm_power_up - Power on all regular (non-sysdev) devices.
+ *	dpm_resume_noirq - Power on all regular (non-sysdev) devices.
  *	@state: PM transition of the system being carried out.
  *
- *	Execute the appropriate "noirq resume" callback for all devices marked
- *	as DPM_OFF_IRQ.
+ *	Call the "noirq" resume handlers for all devices marked as
+ *	DPM_OFF_IRQ and enable device drivers to receive interrupts.
  *
  *	Must be called under dpm_list_mtx.  Device drivers should not receive
  *	interrupts while it's being executed.
  */
-static void dpm_power_up(pm_message_t state)
+void dpm_resume_noirq(pm_message_t state)
 {
 	struct device *dev;
 
@@ -363,33 +360,21 @@ static void dpm_power_up(pm_message_t state)
 			int error;
 
 			dev->power.status = DPM_OFF;
-			error = resume_device_noirq(dev, state);
+			error = device_resume_noirq(dev, state);
 			if (error)
 				pm_dev_err(dev, state, " early", error);
 		}
 	mutex_unlock(&dpm_list_mtx);
-}
-
-/**
- *	device_power_up - Turn on all devices that need special attention.
- *	@state: PM transition of the system being carried out.
- *
- *	Call the "early" resume handlers and enable device drivers to receive
- *	interrupts.
- */
-void device_power_up(pm_message_t state)
-{
-	dpm_power_up(state);
 	resume_device_irqs();
 }
-EXPORT_SYMBOL_GPL(device_power_up);
+EXPORT_SYMBOL_GPL(dpm_resume_noirq);
 
 /**
- *	resume_device - Restore state for one device.
+ *	device_resume - Restore state for one device.
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  */
-static int resume_device(struct device *dev, pm_message_t state)
+static int device_resume(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -462,7 +447,7 @@ static void dpm_resume(pm_message_t state)
 			dev->power.status = DPM_RESUMING;
 			mutex_unlock(&dpm_list_mtx);
 
-			error = resume_device(dev, state);
+			error = device_resume(dev, state);
 
 			mutex_lock(&dpm_list_mtx);
 			if (error)
@@ -480,11 +465,11 @@ static void dpm_resume(pm_message_t state)
 }
 
 /**
- *	complete_device - Complete a PM transition for given device
+ *	device_complete - Complete a PM transition for given device
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  */
-static void complete_device(struct device *dev, pm_message_t state)
+static void device_complete(struct device *dev, pm_message_t state)
 {
 	down(&dev->sem);
 
@@ -527,7 +512,7 @@ static void dpm_complete(pm_message_t state)
 			dev->power.status = DPM_ON;
 			mutex_unlock(&dpm_list_mtx);
 
-			complete_device(dev, state);
+			device_complete(dev, state);
 
 			mutex_lock(&dpm_list_mtx);
 		}
@@ -540,19 +525,19 @@ static void dpm_complete(pm_message_t state)
 }
 
 /**
- *	device_resume - Restore state of each device in system.
+ *	dpm_resume_end - Restore state of each device in system.
  *	@state: PM transition of the system being carried out.
  *
  *	Resume all the devices, unlock them all, and allow new
  *	devices to be registered once again.
  */
-void device_resume(pm_message_t state)
+void dpm_resume_end(pm_message_t state)
 {
 	might_sleep();
 	dpm_resume(state);
 	dpm_complete(state);
 }
-EXPORT_SYMBOL_GPL(device_resume);
+EXPORT_SYMBOL_GPL(dpm_resume_end);
 
 
 /*------------------------- Suspend routines -------------------------*/
@@ -577,13 +562,13 @@ static pm_message_t resume_event(pm_message_t sleep_state)
 }
 
 /**
- *	suspend_device_noirq - Shut down one device (late suspend).
+ *	device_suspend_noirq - Shut down one device (late suspend).
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  *
  *	This is called with interrupts off and only a single CPU running.
  */
-static int suspend_device_noirq(struct device *dev, pm_message_t state)
+static int device_suspend_noirq(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -593,24 +578,20 @@ static int suspend_device_noirq(struct device *dev, pm_message_t state)
 	if (dev->bus->pm) {
 		pm_dev_dbg(dev, state, "LATE ");
 		error = pm_noirq_op(dev, dev->bus->pm, state);
-	} else if (dev->bus->suspend_late) {
-		pm_dev_dbg(dev, state, "legacy LATE ");
-		error = dev->bus->suspend_late(dev, state);
-		suspend_report_result(dev->bus->suspend_late, error);
 	}
 	return error;
 }
 
 /**
- *	device_power_down - Shut down special devices.
+ *	dpm_suspend_noirq - Power down all regular (non-sysdev) devices.
  *	@state: PM transition of the system being carried out.
  *
- *	Prevent device drivers from receiving interrupts and call the "late"
+ *	Prevent device drivers from receiving interrupts and call the "noirq"
  *	suspend handlers.
  *
  *	Must be called under dpm_list_mtx.
  */
-int device_power_down(pm_message_t state)
+int dpm_suspend_noirq(pm_message_t state)
 {
 	struct device *dev;
 	int error = 0;
@@ -618,7 +599,7 @@ int device_power_down(pm_message_t state)
 	suspend_device_irqs();
 	mutex_lock(&dpm_list_mtx);
 	list_for_each_entry_reverse(dev, &dpm_list, power.entry) {
-		error = suspend_device_noirq(dev, state);
+		error = device_suspend_noirq(dev, state);
 		if (error) {
 			pm_dev_err(dev, state, " late", error);
 			break;
@@ -627,17 +608,17 @@ int device_power_down(pm_message_t state)
 	}
 	mutex_unlock(&dpm_list_mtx);
 	if (error)
-		device_power_up(resume_event(state));
+		dpm_resume_noirq(resume_event(state));
 	return error;
 }
-EXPORT_SYMBOL_GPL(device_power_down);
+EXPORT_SYMBOL_GPL(dpm_suspend_noirq);
 
 /**
- *	suspend_device - Save state of one device.
+ *	device_suspend - Save state of one device.
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  */
-static int suspend_device(struct device *dev, pm_message_t state)
+static int device_suspend(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -704,7 +685,7 @@ static int dpm_suspend(pm_message_t state)
 		get_device(dev);
 		mutex_unlock(&dpm_list_mtx);
 
-		error = suspend_device(dev, state);
+		error = device_suspend(dev, state);
 
 		mutex_lock(&dpm_list_mtx);
 		if (error) {
@@ -723,11 +704,11 @@ static int dpm_suspend(pm_message_t state)
 }
 
 /**
- *	prepare_device - Execute the ->prepare() callback(s) for given device.
+ *	device_prepare - Execute the ->prepare() callback(s) for given device.
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  */
-static int prepare_device(struct device *dev, pm_message_t state)
+static int device_prepare(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -781,7 +762,7 @@ static int dpm_prepare(pm_message_t state)
 		dev->power.status = DPM_PREPARING;
 		mutex_unlock(&dpm_list_mtx);
 
-		error = prepare_device(dev, state);
+		error = device_prepare(dev, state);
 
 		mutex_lock(&dpm_list_mtx);
 		if (error) {
@@ -807,12 +788,12 @@ static int dpm_prepare(pm_message_t state)
 }
 
 /**
- *	device_suspend - Save state and stop all devices in system.
+ *	dpm_suspend_start - Save state and stop all devices in system.
  *	@state: PM transition of the system being carried out.
  *
  *	Prepare and suspend all devices.
  */
-int device_suspend(pm_message_t state)
+int dpm_suspend_start(pm_message_t state)
 {
 	int error;
 
@@ -822,7 +803,7 @@ int device_suspend(pm_message_t state)
 		error = dpm_suspend(state);
 	return error;
 }
-EXPORT_SYMBOL_GPL(device_suspend);
+EXPORT_SYMBOL_GPL(dpm_suspend_start);
 
 void __suspend_report_result(const char *function, void *fn, int ret)
 {
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 3236b434b964..9742a78c9fe4 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -343,11 +343,15 @@ static void __sysdev_resume(struct sys_device *dev)
 	/* First, call the class-specific one */
 	if (cls->resume)
 		cls->resume(dev);
+	WARN_ONCE(!irqs_disabled(),
+		"Interrupts enabled after %pF\n", cls->resume);
 
 	/* Call auxillary drivers next. */
 	list_for_each_entry(drv, &cls->drivers, entry) {
 		if (drv->resume)
 			drv->resume(dev);
+		WARN_ONCE(!irqs_disabled(),
+			"Interrupts enabled after %pF\n", drv->resume);
 	}
 }
 
@@ -377,6 +381,9 @@ int sysdev_suspend(pm_message_t state)
 	if (ret)
 		return ret;
 
+	WARN_ONCE(!irqs_disabled(),
+		"Interrupts enabled while suspending system devices\n");
+
 	pr_debug("Suspending System Devices\n");
 
 	list_for_each_entry_reverse(cls, &system_kset->list, kset.kobj.entry) {
@@ -393,6 +400,9 @@ int sysdev_suspend(pm_message_t state)
 					if (ret)
 						goto aux_driver;
 				}
+				WARN_ONCE(!irqs_disabled(),
+					"Interrupts enabled after %pF\n",
+					drv->suspend);
 			}
 
 			/* Now call the generic one */
@@ -400,6 +410,9 @@ int sysdev_suspend(pm_message_t state)
 				ret = cls->suspend(sysdev, state);
 				if (ret)
 					goto cls_driver;
+				WARN_ONCE(!irqs_disabled(),
+					"Interrupts enabled after %pF\n",
+					cls->suspend);
 			}
 		}
 	}
@@ -452,6 +465,9 @@ int sysdev_resume(void)
 {
 	struct sysdev_class *cls;
 
+	WARN_ONCE(!irqs_disabled(),
+		"Interrupts enabled while resuming system devices\n");
+
 	pr_debug("Resuming System Devices\n");
 
 	list_for_each_entry(cls, &system_kset->list, kset.kobj.entry) {
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index fddc2025dece..10d03d7931c4 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -43,7 +43,7 @@ static int xen_suspend(void *data)
 	if (err) {
 		printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n",
 			err);
-		device_power_up(PMSG_RESUME);
+		dpm_resume_noirq(PMSG_RESUME);
 		return err;
 	}
 
@@ -69,7 +69,7 @@ static int xen_suspend(void *data)
 	}
 
 	sysdev_resume();
-	device_power_up(PMSG_RESUME);
+	dpm_resume_noirq(PMSG_RESUME);
 
 	return 0;
 }
@@ -92,18 +92,18 @@ static void do_suspend(void)
 	}
 #endif
 
-	err = device_suspend(PMSG_SUSPEND);
+	err = dpm_suspend_start(PMSG_SUSPEND);
 	if (err) {
-		printk(KERN_ERR "xen suspend: device_suspend %d\n", err);
+		printk(KERN_ERR "xen suspend: dpm_suspend_start %d\n", err);
 		goto out;
 	}
 
 	printk(KERN_DEBUG "suspending xenstore...\n");
 	xs_suspend();
 
-	err = device_power_down(PMSG_SUSPEND);
+	err = dpm_suspend_noirq(PMSG_SUSPEND);
 	if (err) {
-		printk(KERN_ERR "device_power_down failed: %d\n", err);
+		printk(KERN_ERR "dpm_suspend_noirq failed: %d\n", err);
 		goto resume_devices;
 	}
 
@@ -119,10 +119,10 @@ static void do_suspend(void)
 	} else
 		xs_suspend_cancel();
 
-	device_power_up(PMSG_RESUME);
+	dpm_resume_noirq(PMSG_RESUME);
 
 resume_devices:
-	device_resume(PMSG_RESUME);
+	dpm_resume_end(PMSG_RESUME);
 
 	/* Make sure timer events get retriggered on all CPUs */
 	clock_was_set();