diff options
Diffstat (limited to 'drivers')
397 files changed, 15082 insertions, 4786 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index d7f9839ba264..a7799a99f2d9 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -9,6 +9,7 @@ menuconfig ACPI depends on PCI depends on PM select PNP + select CPU_IDLE default y ---help--- Advanced Configuration and Power Interface (ACPI) support for @@ -287,7 +288,7 @@ config ACPI_CONTAINER support physical cpu/memory hot-plug. If one selects "m", this driver can be loaded with - "modprobe acpi_container". + "modprobe container". config ACPI_HOTPLUG_MEMORY tristate "Memory Hotplug" diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c index 9684cc827930..22ce48985720 100644 --- a/drivers/acpi/acpica/tbutils.c +++ b/drivers/acpi/acpica/tbutils.c @@ -538,10 +538,9 @@ acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags) if (ACPI_FAILURE(status)) { ACPI_WARNING((AE_INFO, "Truncating %u table entries!", - (unsigned) - (acpi_gbl_root_table_list.size - - acpi_gbl_root_table_list. - count))); + (unsigned) (table_count - + (acpi_gbl_root_table_list. + count - 2)))); break; } } diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c index c3e841f3cde9..ab0aff3c7d6a 100644 --- a/drivers/acpi/acpica/tbxface.c +++ b/drivers/acpi/acpica/tbxface.c @@ -365,7 +365,7 @@ ACPI_EXPORT_SYMBOL(acpi_unload_table_id) /******************************************************************************* * - * FUNCTION: acpi_get_table + * FUNCTION: acpi_get_table_with_size * * PARAMETERS: Signature - ACPI signature of needed table * Instance - Which instance (for SSDTs) @@ -377,8 +377,9 @@ ACPI_EXPORT_SYMBOL(acpi_unload_table_id) * *****************************************************************************/ acpi_status -acpi_get_table(char *signature, - u32 instance, struct acpi_table_header **out_table) +acpi_get_table_with_size(char *signature, + u32 instance, struct acpi_table_header **out_table, + acpi_size *tbl_size) { u32 i; u32 j; @@ -408,6 +409,7 @@ acpi_get_table(char *signature, acpi_tb_verify_table(&acpi_gbl_root_table_list.tables[i]); if (ACPI_SUCCESS(status)) { *out_table = acpi_gbl_root_table_list.tables[i].pointer; + *tbl_size = acpi_gbl_root_table_list.tables[i].length; } if (!acpi_gbl_permanent_mmap) { @@ -420,6 +422,15 @@ acpi_get_table(char *signature, return (AE_NOT_FOUND); } +acpi_status +acpi_get_table(char *signature, + u32 instance, struct acpi_table_header **out_table) +{ + acpi_size tbl_size; + + return acpi_get_table_with_size(signature, + instance, out_table, &tbl_size); +} ACPI_EXPORT_SYMBOL(acpi_get_table) /******************************************************************************* diff --git a/drivers/acpi/acpica/uteval.c b/drivers/acpi/acpica/uteval.c index da9450bc60f7..9c9897dbe907 100644 --- a/drivers/acpi/acpica/uteval.c +++ b/drivers/acpi/acpica/uteval.c @@ -116,9 +116,9 @@ acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state) return_ACPI_STATUS(AE_NO_MEMORY); } - /* Default return value is SUPPORTED */ + /* Default return value is 0, NOT-SUPPORTED */ - return_desc->integer.value = ACPI_UINT32_MAX; + return_desc->integer.value = 0; walk_state->return_desc = return_desc; /* Compare input string to static table of supported interfaces */ @@ -127,10 +127,8 @@ acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state) if (!ACPI_STRCMP (string_desc->string.pointer, acpi_interfaces_supported[i])) { - - /* The interface is supported */ - - return_ACPI_STATUS(AE_OK); + return_desc->integer.value = ACPI_UINT32_MAX; + goto done; } } @@ -141,15 +139,14 @@ acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state) */ status = acpi_os_validate_interface(string_desc->string.pointer); if (ACPI_SUCCESS(status)) { - - /* The interface is supported */ - - return_ACPI_STATUS(AE_OK); + return_desc->integer.value = ACPI_UINT32_MAX; } - /* The interface is not supported */ +done: + ACPI_DEBUG_PRINT_RAW((ACPI_DB_INFO, "ACPI: BIOS _OSI(%s) %ssupported\n", + string_desc->string.pointer, + return_desc->integer.value == 0 ? "not-" : "")); - return_desc->integer.value = 0; return_ACPI_STATUS(AE_OK); } diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c index 17020c12623c..fe0cdf83641a 100644 --- a/drivers/acpi/container.c +++ b/drivers/acpi/container.c @@ -163,7 +163,7 @@ static void container_notify_cb(acpi_handle handle, u32 type, void *context) case ACPI_NOTIFY_BUS_CHECK: /* Fall through */ case ACPI_NOTIFY_DEVICE_CHECK: - printk("Container driver received %s event\n", + printk(KERN_WARNING "Container driver received %s event\n", (type == ACPI_NOTIFY_BUS_CHECK) ? "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK"); status = acpi_bus_get_device(handle, &device); @@ -174,7 +174,8 @@ static void container_notify_cb(acpi_handle handle, u32 type, void *context) kobject_uevent(&device->dev.kobj, KOBJ_ONLINE); else - printk("Failed to add container\n"); + printk(KERN_WARNING + "Failed to add container\n"); } } else { if (ACPI_SUCCESS(status)) { diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 5b30b8d91d71..35094f230b1e 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -855,10 +855,14 @@ fdd_out: static ssize_t show_docked(struct device *dev, struct device_attribute *attr, char *buf) { + struct acpi_device *tmp; + struct dock_station *dock_station = *((struct dock_station **) dev->platform_data); - return snprintf(buf, PAGE_SIZE, "%d\n", dock_present(dock_station)); + if (ACPI_SUCCESS(acpi_bus_get_device(dock_station->handle, &tmp))) + return snprintf(buf, PAGE_SIZE, "1\n"); + return snprintf(buf, PAGE_SIZE, "0\n"); } static DEVICE_ATTR(docked, S_IRUGO, show_docked, NULL); @@ -984,7 +988,7 @@ static int dock_add(acpi_handle handle) ret = device_create_file(&dock_device->dev, &dev_attr_docked); if (ret) { - printk("Error %d adding sysfs file\n", ret); + printk(KERN_ERR "Error %d adding sysfs file\n", ret); platform_device_unregister(dock_device); kfree(dock_station); dock_station = NULL; @@ -992,7 +996,7 @@ static int dock_add(acpi_handle handle) } ret = device_create_file(&dock_device->dev, &dev_attr_undock); if (ret) { - printk("Error %d adding sysfs file\n", ret); + printk(KERN_ERR "Error %d adding sysfs file\n", ret); device_remove_file(&dock_device->dev, &dev_attr_docked); platform_device_unregister(dock_device); kfree(dock_station); @@ -1001,7 +1005,7 @@ static int dock_add(acpi_handle handle) } ret = device_create_file(&dock_device->dev, &dev_attr_uid); if (ret) { - printk("Error %d adding sysfs file\n", ret); + printk(KERN_ERR "Error %d adding sysfs file\n", ret); device_remove_file(&dock_device->dev, &dev_attr_docked); device_remove_file(&dock_device->dev, &dev_attr_undock); platform_device_unregister(dock_device); @@ -1011,7 +1015,7 @@ static int dock_add(acpi_handle handle) } ret = device_create_file(&dock_device->dev, &dev_attr_flags); if (ret) { - printk("Error %d adding sysfs file\n", ret); + printk(KERN_ERR "Error %d adding sysfs file\n", ret); device_remove_file(&dock_device->dev, &dev_attr_docked); device_remove_file(&dock_device->dev, &dev_attr_undock); device_remove_file(&dock_device->dev, &dev_attr_uid); diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index a2b82c90a683..5c2f5d343be6 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -982,7 +982,7 @@ int __init acpi_ec_ecdt_probe(void) saved_ec = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL); if (!saved_ec) return -ENOMEM; - memcpy(&saved_ec, boot_ec, sizeof(saved_ec)); + memcpy(saved_ec, boot_ec, sizeof(*saved_ec)); /* fall through */ } /* This workaround is needed only on some broken machines, diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index adec3d15810a..5479b9f42513 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -255,12 +255,12 @@ static int acpi_platform_notify(struct device *dev) } type = acpi_get_bus_type(dev->bus); if (!type) { - DBG("No ACPI bus support for %s\n", dev->bus_id); + DBG("No ACPI bus support for %s\n", dev_name(dev)); ret = -EINVAL; goto end; } if ((ret = type->find_device(dev, &handle)) != 0) - DBG("Can't get handler for %s\n", dev->bus_id); + DBG("Can't get handler for %s\n", dev_name(dev)); end: if (!ret) acpi_bind_one(dev, handle); @@ -271,10 +271,10 @@ static int acpi_platform_notify(struct device *dev) acpi_get_name(dev->archdata.acpi_handle, ACPI_FULL_PATHNAME, &buffer); - DBG("Device %s -> %s\n", dev->bus_id, (char *)buffer.pointer); + DBG("Device %s -> %s\n", dev_name(dev), (char *)buffer.pointer); kfree(buffer.pointer); } else - DBG("Device %s -> No ACPI support\n", dev->bus_id); + DBG("Device %s -> No ACPI support\n", dev_name(dev)); #endif return ret; diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 6729a4992f2b..d1dd5160daa9 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -228,10 +228,10 @@ void acpi_os_vprintf(const char *fmt, va_list args) if (acpi_in_debugger) { kdb_printf("%s", buffer); } else { - printk("%s", buffer); + printk(KERN_CONT "%s", buffer); } #else - printk("%s", buffer); + printk(KERN_CONT "%s", buffer); #endif } @@ -274,12 +274,19 @@ EXPORT_SYMBOL_GPL(acpi_os_map_memory); void acpi_os_unmap_memory(void __iomem * virt, acpi_size size) { - if (acpi_gbl_permanent_mmap) { + if (acpi_gbl_permanent_mmap) iounmap(virt); - } + else + __acpi_unmap_table(virt, size); } EXPORT_SYMBOL_GPL(acpi_os_unmap_memory); +void early_acpi_os_unmap_memory(void __iomem * virt, acpi_size size) +{ + if (!acpi_gbl_permanent_mmap) + __acpi_unmap_table(virt, size); +} + #ifdef ACPI_FUTURE_USAGE acpi_status acpi_os_get_physical_address(void *virt, acpi_physical_address * phys) @@ -1317,6 +1324,54 @@ acpi_os_validate_interface (char *interface) return AE_SUPPORT; } +#ifdef CONFIG_X86 + +struct aml_port_desc { + uint start; + uint end; + char* name; + char warned; +}; + +static struct aml_port_desc aml_invalid_port_list[] = { + {0x20, 0x21, "PIC0", 0}, + {0xA0, 0xA1, "PIC1", 0}, + {0x4D0, 0x4D1, "ELCR", 0} +}; + +/* + * valid_aml_io_address() + * + * if valid, return true + * else invalid, warn once, return false + */ +static bool valid_aml_io_address(uint address, uint length) +{ + int i; + int entries = sizeof(aml_invalid_port_list) / sizeof(struct aml_port_desc); + + for (i = 0; i < entries; ++i) { + if ((address >= aml_invalid_port_list[i].start && + address <= aml_invalid_port_list[i].end) || + (address + length >= aml_invalid_port_list[i].start && + address + length <= aml_invalid_port_list[i].end)) + { + if (!aml_invalid_port_list[i].warned) + { + printk(KERN_ERR "ACPI: Denied BIOS AML access" + " to invalid port 0x%x+0x%x (%s)\n", + address, length, + aml_invalid_port_list[i].name); + aml_invalid_port_list[i].warned = 1; + } + return false; /* invalid */ + } + } + return true; /* valid */ +} +#else +static inline bool valid_aml_io_address(uint address, uint length) { return true; } +#endif /****************************************************************************** * * FUNCTION: acpi_os_validate_address @@ -1346,6 +1401,8 @@ acpi_os_validate_address ( switch (space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: + if (!valid_aml_io_address(address, length)) + return AE_AML_ILLEGAL_ADDRESS; case ACPI_ADR_SPACE_SYSTEM_MEMORY: /* Only interference checks against SystemIO and SytemMemory are needed */ diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index 1c6e73c7865e..6c772ca76bd1 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -593,7 +593,7 @@ static int acpi_pci_link_allocate(struct acpi_pci_link *link) return -ENODEV; } else { acpi_irq_penalty[link->irq.active] += PIRQ_PENALTY_PCI_USING; - printk(PREFIX "%s [%s] enabled at IRQ %d\n", + printk(KERN_WARNING PREFIX "%s [%s] enabled at IRQ %d\n", acpi_device_name(link->device), acpi_device_bid(link->device), link->irq.active); } diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 66a9d8145562..7bc22a471fe3 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -66,43 +66,17 @@ ACPI_MODULE_NAME("processor_idle"); #define ACPI_PROCESSOR_FILE_POWER "power" #define US_TO_PM_TIMER_TICKS(t) ((t * (PM_TIMER_FREQUENCY/1000)) / 1000) #define PM_TIMER_TICK_NS (1000000000ULL/PM_TIMER_FREQUENCY) -#ifndef CONFIG_CPU_IDLE -#define C2_OVERHEAD 4 /* 1us (3.579 ticks per us) */ -#define C3_OVERHEAD 4 /* 1us (3.579 ticks per us) */ -static void (*pm_idle_save) (void) __read_mostly; -#else #define C2_OVERHEAD 1 /* 1us */ #define C3_OVERHEAD 1 /* 1us */ -#endif #define PM_TIMER_TICKS_TO_US(p) (((p) * 1000)/(PM_TIMER_FREQUENCY/1000)) static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER; -#ifdef CONFIG_CPU_IDLE module_param(max_cstate, uint, 0000); -#else -module_param(max_cstate, uint, 0644); -#endif static unsigned int nocst __read_mostly; module_param(nocst, uint, 0000); -#ifndef CONFIG_CPU_IDLE -/* - * bm_history -- bit-mask with a bit per jiffy of bus-master activity - * 1000 HZ: 0xFFFFFFFF: 32 jiffies = 32ms - * 800 HZ: 0xFFFFFFFF: 32 jiffies = 40ms - * 100 HZ: 0x0000000F: 4 jiffies = 40ms - * reduce history for more aggressive entry into C3 - */ -static unsigned int bm_history __read_mostly = - (HZ >= 800 ? 0xFFFFFFFF : ((1U << (HZ / 25)) - 1)); -module_param(bm_history, uint, 0644); - -static int acpi_processor_set_power_policy(struct acpi_processor *pr); - -#else /* CONFIG_CPU_IDLE */ static unsigned int latency_factor __read_mostly = 2; module_param(latency_factor, uint, 0644); -#endif /* * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3. @@ -224,71 +198,6 @@ static void acpi_safe_halt(void) current_thread_info()->status |= TS_POLLING; } -#ifndef CONFIG_CPU_IDLE - -static void -acpi_processor_power_activate(struct acpi_processor *pr, - struct acpi_processor_cx *new) -{ - struct acpi_processor_cx *old; - - if (!pr || !new) - return; - - old = pr->power.state; - - if (old) - old->promotion.count = 0; - new->demotion.count = 0; - - /* Cleanup from old state. */ - if (old) { - switch (old->type) { - case ACPI_STATE_C3: - /* Disable bus master reload */ - if (new->type != ACPI_STATE_C3 && pr->flags.bm_check) - acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0); - break; - } - } - - /* Prepare to use new state. */ - switch (new->type) { - case ACPI_STATE_C3: - /* Enable bus master reload */ - if (old->type != ACPI_STATE_C3 && pr->flags.bm_check) - acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1); - break; - } - - pr->power.state = new; - - return; -} - -static atomic_t c3_cpu_count; - -/* Common C-state entry for C2, C3, .. */ -static void acpi_cstate_enter(struct acpi_processor_cx *cstate) -{ - /* Don't trace irqs off for idle */ - stop_critical_timings(); - if (cstate->entry_method == ACPI_CSTATE_FFH) { - /* Call into architectural FFH based C-state */ - acpi_processor_ffh_cstate_enter(cstate); - } else { - int unused; - /* IO port based C-state */ - inb(cstate->address); - /* Dummy wait op - must do something useless after P_LVL2 read - because chipsets cannot guarantee that STPCLK# signal - gets asserted in time to freeze execution properly. */ - unused = inl(acpi_gbl_FADT.xpm_timer_block.address); - } - start_critical_timings(); -} -#endif /* !CONFIG_CPU_IDLE */ - #ifdef ARCH_APICTIMER_STOPS_ON_C3 /* @@ -390,421 +299,6 @@ static int tsc_halts_in_c(int state) } #endif -#ifndef CONFIG_CPU_IDLE -static void acpi_processor_idle(void) -{ - struct acpi_processor *pr = NULL; - struct acpi_processor_cx *cx = NULL; - struct acpi_processor_cx *next_state = NULL; - int sleep_ticks = 0; - u32 t1, t2 = 0; - - /* - * Interrupts must be disabled during bus mastering calculations and - * for C2/C3 transitions. - */ - local_irq_disable(); - - pr = __get_cpu_var(processors); - if (!pr) { - local_irq_enable(); - return; - } - - /* - * Check whether we truly need to go idle, or should - * reschedule: - */ - if (unlikely(need_resched())) { - local_irq_enable(); - return; - } - - cx = pr->power.state; - if (!cx || acpi_idle_suspend) { - if (pm_idle_save) { - pm_idle_save(); /* enables IRQs */ - } else { - acpi_safe_halt(); - local_irq_enable(); - } - - return; - } - - /* - * Check BM Activity - * ----------------- - * Check for bus mastering activity (if required), record, and check - * for demotion. - */ - if (pr->flags.bm_check) { - u32 bm_status = 0; - unsigned long diff = jiffies - pr->power.bm_check_timestamp; - - if (diff > 31) - diff = 31; - - pr->power.bm_activity <<= diff; - - acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status); - if (bm_status) { - pr->power.bm_activity |= 0x1; - acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS, 1); - } - /* - * PIIX4 Erratum #18: Note that BM_STS doesn't always reflect - * the true state of bus mastering activity; forcing us to - * manually check the BMIDEA bit of each IDE channel. - */ - else if (errata.piix4.bmisx) { - if ((inb_p(errata.piix4.bmisx + 0x02) & 0x01) - || (inb_p(errata.piix4.bmisx + 0x0A) & 0x01)) - pr->power.bm_activity |= 0x1; - } - - pr->power.bm_check_timestamp = jiffies; - - /* - * If bus mastering is or was active this jiffy, demote - * to avoid a faulty transition. Note that the processor - * won't enter a low-power state during this call (to this - * function) but should upon the next. - * - * TBD: A better policy might be to fallback to the demotion - * state (use it for this quantum only) istead of - * demoting -- and rely on duration as our sole demotion - * qualification. This may, however, introduce DMA - * issues (e.g. floppy DMA transfer overrun/underrun). - */ - if ((pr->power.bm_activity & 0x1) && - cx->demotion.threshold.bm) { - local_irq_enable(); - next_state = cx->demotion.state; - goto end; - } - } - -#ifdef CONFIG_HOTPLUG_CPU - /* - * Check for P_LVL2_UP flag before entering C2 and above on - * an SMP system. We do it here instead of doing it at _CST/P_LVL - * detection phase, to work cleanly with logical CPU hotplug. - */ - if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) && - !pr->flags.has_cst && !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED)) - cx = &pr->power.states[ACPI_STATE_C1]; -#endif - - /* - * Sleep: - * ------ - * Invoke the current Cx state to put the processor to sleep. - */ - if (cx->type == ACPI_STATE_C2 || cx->type == ACPI_STATE_C3) { - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we - * test NEED_RESCHED: - */ - smp_mb(); - if (need_resched()) { - current_thread_info()->status |= TS_POLLING; - local_irq_enable(); - return; - } - } - - switch (cx->type) { - - case ACPI_STATE_C1: - /* - * Invoke C1. - * Use the appropriate idle routine, the one that would - * be used without acpi C-states. - */ - if (pm_idle_save) { - pm_idle_save(); /* enables IRQs */ - } else { - acpi_safe_halt(); - local_irq_enable(); - } - - /* - * TBD: Can't get time duration while in C1, as resumes - * go to an ISR rather than here. Need to instrument - * base interrupt handler. - * - * Note: the TSC better not stop in C1, sched_clock() will - * skew otherwise. - */ - sleep_ticks = 0xFFFFFFFF; - - break; - - case ACPI_STATE_C2: - /* Get start time (ticks) */ - t1 = inl(acpi_gbl_FADT.xpm_timer_block.address); - /* Tell the scheduler that we are going deep-idle: */ - sched_clock_idle_sleep_event(); - /* Invoke C2 */ - acpi_state_timer_broadcast(pr, cx, 1); - acpi_cstate_enter(cx); - /* Get end time (ticks) */ - t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); - -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) - /* TSC halts in C2, so notify users */ - if (tsc_halts_in_c(ACPI_STATE_C2)) - mark_tsc_unstable("possible TSC halt in C2"); -#endif - /* Compute time (ticks) that we were actually asleep */ - sleep_ticks = ticks_elapsed(t1, t2); - - /* Tell the scheduler how much we idled: */ - sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS); - - /* Re-enable interrupts */ - local_irq_enable(); - /* Do not account our idle-switching overhead: */ - sleep_ticks -= cx->latency_ticks + C2_OVERHEAD; - - current_thread_info()->status |= TS_POLLING; - acpi_state_timer_broadcast(pr, cx, 0); - break; - - case ACPI_STATE_C3: - acpi_unlazy_tlb(smp_processor_id()); - /* - * Must be done before busmaster disable as we might - * need to access HPET ! - */ - acpi_state_timer_broadcast(pr, cx, 1); - /* - * disable bus master - * bm_check implies we need ARB_DIS - * !bm_check implies we need cache flush - * bm_control implies whether we can do ARB_DIS - * - * That leaves a case where bm_check is set and bm_control is - * not set. In that case we cannot do much, we enter C3 - * without doing anything. - */ - if (pr->flags.bm_check && pr->flags.bm_control) { - if (atomic_inc_return(&c3_cpu_count) == - num_online_cpus()) { - /* - * All CPUs are trying to go to C3 - * Disable bus master arbitration - */ - acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1); - } - } else if (!pr->flags.bm_check) { - /* SMP with no shared cache... Invalidate cache */ - ACPI_FLUSH_CPU_CACHE(); - } - - /* Get start time (ticks) */ - t1 = inl(acpi_gbl_FADT.xpm_timer_block.address); - /* Invoke C3 */ - /* Tell the scheduler that we are going deep-idle: */ - sched_clock_idle_sleep_event(); - acpi_cstate_enter(cx); - /* Get end time (ticks) */ - t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); - if (pr->flags.bm_check && pr->flags.bm_control) { - /* Enable bus master arbitration */ - atomic_dec(&c3_cpu_count); - acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0); - } - -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) - /* TSC halts in C3, so notify users */ - if (tsc_halts_in_c(ACPI_STATE_C3)) - mark_tsc_unstable("TSC halts in C3"); -#endif - /* Compute time (ticks) that we were actually asleep */ - sleep_ticks = ticks_elapsed(t1, t2); - /* Tell the scheduler how much we idled: */ - sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS); - - /* Re-enable interrupts */ - local_irq_enable(); - /* Do not account our idle-switching overhead: */ - sleep_ticks -= cx->latency_ticks + C3_OVERHEAD; - - current_thread_info()->status |= TS_POLLING; - acpi_state_timer_broadcast(pr, cx, 0); - break; - - default: - local_irq_enable(); - return; - } - cx->usage++; - if ((cx->type != ACPI_STATE_C1) && (sleep_ticks > 0)) - cx->time += sleep_ticks; - - next_state = pr->power.state; - -#ifdef CONFIG_HOTPLUG_CPU - /* Don't do promotion/demotion */ - if ((cx->type == ACPI_STATE_C1) && (num_online_cpus() > 1) && - !pr->flags.has_cst && !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED)) { - next_state = cx; - goto end; - } -#endif - - /* - * Promotion? - * ---------- - * Track the number of longs (time asleep is greater than threshold) - * and promote when the count threshold is reached. Note that bus - * mastering activity may prevent promotions. - * Do not promote above max_cstate. - */ - if (cx->promotion.state && - ((cx->promotion.state - pr->power.states) <= max_cstate)) { - if (sleep_ticks > cx->promotion.threshold.ticks && - cx->promotion.state->latency <= - pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) { - cx->promotion.count++; - cx->demotion.count = 0; - if (cx->promotion.count >= - cx->promotion.threshold.count) { - if (pr->flags.bm_check) { - if (! - (pr->power.bm_activity & cx-> - promotion.threshold.bm)) { - next_state = - cx->promotion.state; - goto end; - } - } else { - next_state = cx->promotion.state; - goto end; - } - } - } - } - - /* - * Demotion? - * --------- - * Track the number of shorts (time asleep is less than time threshold) - * and demote when the usage threshold is reached. - */ - if (cx->demotion.state) { - if (sleep_ticks < cx->demotion.threshold.ticks) { - cx->demotion.count++; - cx->promotion.count = 0; - if (cx->demotion.count >= cx->demotion.threshold.count) { - next_state = cx->demotion.state; - goto end; - } - } - } - - end: - /* - * Demote if current state exceeds max_cstate - * or if the latency of the current state is unacceptable - */ - if ((pr->power.state - pr->power.states) > max_cstate || - pr->power.state->latency > - pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) { - if (cx->demotion.state) - next_state = cx->demotion.state; - } - - /* - * New Cx State? - * ------------- - * If we're going to start using a new Cx state we must clean up - * from the previous and prepare to use the new. - */ - if (next_state != pr->power.state) - acpi_processor_power_activate(pr, next_state); -} - -static int acpi_processor_set_power_policy(struct acpi_processor *pr) -{ - unsigned int i; - unsigned int state_is_set = 0; - struct acpi_processor_cx *lower = NULL; - struct acpi_processor_cx *higher = NULL; - struct acpi_processor_cx *cx; - - - if (!pr) - return -EINVAL; - - /* - * This function sets the default Cx state policy (OS idle handler). - * Our scheme is to promote quickly to C2 but more conservatively - * to C3. We're favoring C2 for its characteristics of low latency - * (quick response), good power savings, and ability to allow bus - * mastering activity. Note that the Cx state policy is completely - * customizable and can be altered dynamically. - */ - - /* startup state */ - for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { - cx = &pr->power.states[i]; - if (!cx->valid) - continue; - - if (!state_is_set) - pr->power.state = cx; - state_is_set++; - break; - } - - if (!state_is_set) - return -ENODEV; - - /* demotion */ - for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { - cx = &pr->power.states[i]; - if (!cx->valid) - continue; - - if (lower) { - cx->demotion.state = lower; - cx->demotion.threshold.ticks = cx->latency_ticks; - cx->demotion.threshold.count = 1; - if (cx->type == ACPI_STATE_C3) - cx->demotion.threshold.bm = bm_history; - } - - lower = cx; - } - - /* promotion */ - for (i = (ACPI_PROCESSOR_MAX_POWER - 1); i > 0; i--) { - cx = &pr->power.states[i]; - if (!cx->valid) - continue; - - if (higher) { - cx->promotion.state = higher; - cx->promotion.threshold.ticks = cx->latency_ticks; - if (cx->type >= ACPI_STATE_C2) - cx->promotion.threshold.count = 4; - else - cx->promotion.threshold.count = 10; - if (higher->type == ACPI_STATE_C3) - cx->promotion.threshold.bm = bm_history; - } - - higher = cx; - } - - return 0; -} -#endif /* !CONFIG_CPU_IDLE */ - static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) { @@ -1047,11 +541,7 @@ static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx) */ cx->valid = 1; -#ifndef CONFIG_CPU_IDLE - cx->latency_ticks = US_TO_PM_TIMER_TICKS(cx->latency); -#else cx->latency_ticks = cx->latency; -#endif return; } @@ -1121,7 +611,6 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr, " for C3 to be enabled on SMP systems\n")); return; } - acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0); } /* @@ -1132,11 +621,16 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr, */ cx->valid = 1; -#ifndef CONFIG_CPU_IDLE - cx->latency_ticks = US_TO_PM_TIMER_TICKS(cx->latency); -#else cx->latency_ticks = cx->latency; -#endif + /* + * On older chipsets, BM_RLD needs to be set + * in order for Bus Master activity to wake the + * system from C3. Newer chipsets handle DMA + * during C3 automatically and BM_RLD is a NOP. + * In either case, the proper way to + * handle BM_RLD is to set it and leave it set. + */ + acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1); return; } @@ -1201,20 +695,6 @@ static int acpi_processor_get_power_info(struct acpi_processor *pr) pr->power.count = acpi_processor_power_verify(pr); -#ifndef CONFIG_CPU_IDLE - /* - * Set Default Policy - * ------------------ - * Now that we know which states are supported, set the default - * policy. Note that this policy can be changed dynamically - * (e.g. encourage deeper sleeps to conserve battery life when - * not on AC). - */ - result = acpi_processor_set_power_policy(pr); - if (result) - return result; -#endif - /* * if one state of type C2 or C3 is available, mark this * CPU as being "idle manageable" @@ -1312,69 +792,6 @@ static const struct file_operations acpi_processor_power_fops = { .release = single_release, }; -#ifndef CONFIG_CPU_IDLE - -int acpi_processor_cst_has_changed(struct acpi_processor *pr) -{ - int result = 0; - - if (boot_option_idle_override) - return 0; - - if (!pr) - return -EINVAL; - - if (nocst) { - return -ENODEV; - } - - if (!pr->flags.power_setup_done) - return -ENODEV; - - /* - * Fall back to the default idle loop, when pm_idle_save had - * been initialized. - */ - if (pm_idle_save) { - pm_idle = pm_idle_save; - /* Relies on interrupts forcing exit from idle. */ - synchronize_sched(); - } - - pr->flags.power = 0; - result = acpi_processor_get_power_info(pr); - if ((pr->flags.power == 1) && (pr->flags.power_setup_done)) - pm_idle = acpi_processor_idle; - - return result; -} - -#ifdef CONFIG_SMP -static void smp_callback(void *v) -{ - /* we already woke the CPU up, nothing more to do */ -} - -/* - * This function gets called when a part of the kernel has a new latency - * requirement. This means we need to get all processors out of their C-state, - * and then recalculate a new suitable C-state. Just do a cross-cpu IPI; that - * wakes them all right up. - */ -static int acpi_processor_latency_notify(struct notifier_block *b, - unsigned long l, void *v) -{ - smp_call_function(smp_callback, NULL, 1); - return NOTIFY_OK; -} - -static struct notifier_block acpi_processor_latency_notifier = { - .notifier_call = acpi_processor_latency_notify, -}; - -#endif - -#else /* CONFIG_CPU_IDLE */ /** * acpi_idle_bm_check - checks if bus master activity was detected @@ -1383,7 +800,7 @@ static int acpi_idle_bm_check(void) { u32 bm_status = 0; - acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status); + acpi_get_register_unlocked(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status); if (bm_status) acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS, 1); /* @@ -1400,25 +817,6 @@ static int acpi_idle_bm_check(void) } /** - * acpi_idle_update_bm_rld - updates the BM_RLD bit depending on target state - * @pr: the processor - * @target: the new target state - */ -static inline void acpi_idle_update_bm_rld(struct acpi_processor *pr, - struct acpi_processor_cx *target) -{ - if (pr->flags.bm_rld_set && target->type != ACPI_STATE_C3) { - acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0); - pr->flags.bm_rld_set = 0; - } - - if (!pr->flags.bm_rld_set && target->type == ACPI_STATE_C3) { - acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1); - pr->flags.bm_rld_set = 1; - } -} - -/** * acpi_idle_do_entry - a helper function that does C2 and C3 type entry * @cx: cstate data * @@ -1473,9 +871,6 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, return 0; } - if (pr->flags.bm_check) - acpi_idle_update_bm_rld(pr, cx); - t1 = inl(acpi_gbl_FADT.xpm_timer_block.address); acpi_idle_do_entry(cx); t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); @@ -1527,9 +922,6 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, */ acpi_state_timer_broadcast(pr, cx, 1); - if (pr->flags.bm_check) - acpi_idle_update_bm_rld(pr, cx); - if (cx->type == ACPI_STATE_C3) ACPI_FLUSH_CPU_CACHE(); @@ -1621,8 +1013,6 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, */ acpi_state_timer_broadcast(pr, cx, 1); - acpi_idle_update_bm_rld(pr, cx); - /* * disable bus master * bm_check implies we need ARB_DIS @@ -1795,8 +1185,6 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr) return ret; } -#endif /* CONFIG_CPU_IDLE */ - int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, struct acpi_device *device) { @@ -1825,10 +1213,6 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, "ACPI: processor limited to max C-state %d\n", max_cstate); first_run++; -#if !defined(CONFIG_CPU_IDLE) && defined(CONFIG_SMP) - pm_qos_add_notifier(PM_QOS_CPU_DMA_LATENCY, - &acpi_processor_latency_notifier); -#endif } if (!pr) @@ -1852,11 +1236,9 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, * platforms that only support C1. */ if (pr->flags.power) { -#ifdef CONFIG_CPU_IDLE acpi_processor_setup_cpuidle(pr); if (cpuidle_register_device(&pr->power.dev)) return -EIO; -#endif printk(KERN_INFO PREFIX "CPU%d (power states:", pr->id); for (i = 1; i <= pr->power.count; i++) @@ -1864,13 +1246,6 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, printk(" C%d[C%d]", i, pr->power.states[i].type); printk(")\n"); - -#ifndef CONFIG_CPU_IDLE - if (pr->id == 0) { - pm_idle_save = pm_idle; - pm_idle = acpi_processor_idle; - } -#endif } /* 'power' [R] */ @@ -1889,34 +1264,12 @@ int acpi_processor_power_exit(struct acpi_processor *pr, if (boot_option_idle_override) return 0; -#ifdef CONFIG_CPU_IDLE cpuidle_unregister_device(&pr->power.dev); -#endif pr->flags.power_setup_done = 0; if (acpi_device_dir(device)) remove_proc_entry(ACPI_PROCESSOR_FILE_POWER, acpi_device_dir(device)); -#ifndef CONFIG_CPU_IDLE - - /* Unregister the idle handler when processor #0 is removed. */ - if (pr->id == 0) { - if (pm_idle_save) - pm_idle = pm_idle_save; - - /* - * We are about to unload the current idle thread pm callback - * (pm_idle), Wait for all processors to update cached/local - * copies of pm_idle before proceeding. - */ - cpu_idle_wait(); -#ifdef CONFIG_SMP - pm_qos_remove_notifier(PM_QOS_CPU_DMA_LATENCY, - &acpi_processor_latency_notifier); -#endif - } -#endif - return 0; } diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index 846e227592d4..9cc769b587ff 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -31,14 +31,6 @@ #include <linux/init.h> #include <linux/cpufreq.h> -#ifdef CONFIG_X86_ACPI_CPUFREQ_PROC_INTF -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/mutex.h> - -#include <asm/uaccess.h> -#endif - #ifdef CONFIG_X86 #include <asm/cpufeature.h> #endif @@ -434,96 +426,6 @@ int acpi_processor_notify_smm(struct module *calling_module) EXPORT_SYMBOL(acpi_processor_notify_smm); -#ifdef CONFIG_X86_ACPI_CPUFREQ_PROC_INTF -/* /proc/acpi/processor/../performance interface (DEPRECATED) */ - -static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file); -static struct file_operations acpi_processor_perf_fops = { - .owner = THIS_MODULE, - .open = acpi_processor_perf_open_fs, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int acpi_processor_perf_seq_show(struct seq_file *seq, void *offset) -{ - struct acpi_processor *pr = seq->private; - int i; - - - if (!pr) - goto end; - - if (!pr->performance) { - seq_puts(seq, "<not supported>\n"); - goto end; - } - - seq_printf(seq, "state count: %d\n" - "active state: P%d\n", - pr->performance->state_count, pr->performance->state); - - seq_puts(seq, "states:\n"); - for (i = 0; i < pr->performance->state_count; i++) - seq_printf(seq, - " %cP%d: %d MHz, %d mW, %d uS\n", - (i == pr->performance->state ? '*' : ' '), i, - (u32) pr->performance->states[i].core_frequency, - (u32) pr->performance->states[i].power, - (u32) pr->performance->states[i].transition_latency); - - end: - return 0; -} - -static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_processor_perf_seq_show, - PDE(inode)->data); -} - -static void acpi_cpufreq_add_file(struct acpi_processor *pr) -{ - struct acpi_device *device = NULL; - - - if (acpi_bus_get_device(pr->handle, &device)) - return; - - /* add file 'performance' [R/W] */ - proc_create_data(ACPI_PROCESSOR_FILE_PERFORMANCE, S_IFREG | S_IRUGO, - acpi_device_dir(device), - &acpi_processor_perf_fops, acpi_driver_data(device)); - return; -} - -static void acpi_cpufreq_remove_file(struct acpi_processor *pr) -{ - struct acpi_device *device = NULL; - - - if (acpi_bus_get_device(pr->handle, &device)) - return; - - /* remove file 'performance' */ - remove_proc_entry(ACPI_PROCESSOR_FILE_PERFORMANCE, - acpi_device_dir(device)); - - return; -} - -#else -static void acpi_cpufreq_add_file(struct acpi_processor *pr) -{ - return; -} -static void acpi_cpufreq_remove_file(struct acpi_processor *pr) -{ - return; -} -#endif /* CONFIG_X86_ACPI_CPUFREQ_PROC_INTF */ - static int acpi_processor_get_psd(struct acpi_processor *pr) { int result = 0; @@ -747,14 +649,12 @@ err_ret: } EXPORT_SYMBOL(acpi_processor_preregister_performance); - int acpi_processor_register_performance(struct acpi_processor_performance *performance, unsigned int cpu) { struct acpi_processor *pr; - if (!(acpi_processor_ppc_status & PPC_REGISTERED)) return -EINVAL; @@ -781,8 +681,6 @@ acpi_processor_register_performance(struct acpi_processor_performance return -EIO; } - acpi_cpufreq_add_file(pr); - mutex_unlock(&performance_mutex); return 0; } @@ -795,7 +693,6 @@ acpi_processor_unregister_performance(struct acpi_processor_performance { struct acpi_processor *pr; - mutex_lock(&performance_mutex); pr = per_cpu(processors, cpu); @@ -808,8 +705,6 @@ acpi_processor_unregister_performance(struct acpi_processor_performance kfree(pr->performance->states); pr->performance = NULL; - acpi_cpufreq_remove_file(pr); - mutex_unlock(&performance_mutex); return; diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 7e3c609cbef2..519266654f06 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -90,31 +90,6 @@ void __init acpi_old_suspend_ordering(void) old_suspend_ordering = true; } -/* - * According to the ACPI specification the BIOS should make sure that ACPI is - * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still, - * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI - * on such systems during resume. Unfortunately that doesn't help in - * particularly pathological cases in which SCI_EN has to be set directly on - * resume, although the specification states very clearly that this flag is - * owned by the hardware. The set_sci_en_on_resume variable will be set in such - * cases. - */ -static bool set_sci_en_on_resume; -/* - * The ACPI specification wants us to save NVS memory regions during hibernation - * and to restore them during the subsequent resume. However, it is not certain - * if this mechanism is going to work on all machines, so we allow the user to - * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line - * option. - */ -static bool s4_no_nvs; - -void __init acpi_s4_no_nvs(void) -{ - s4_no_nvs = true; -} - /** * acpi_pm_disable_gpes - Disable the GPEs. */ @@ -193,6 +168,18 @@ static void acpi_pm_end(void) #endif /* CONFIG_ACPI_SLEEP */ #ifdef CONFIG_SUSPEND +/* + * According to the ACPI specification the BIOS should make sure that ACPI is + * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still, + * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI + * on such systems during resume. Unfortunately that doesn't help in + * particularly pathological cases in which SCI_EN has to be set directly on + * resume, although the specification states very clearly that this flag is + * owned by the hardware. The set_sci_en_on_resume variable will be set in such + * cases. + */ +static bool set_sci_en_on_resume; + extern void do_suspend_lowlevel(void); static u32 acpi_suspend_states[] = { @@ -396,6 +383,20 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { #endif /* CONFIG_SUSPEND */ #ifdef CONFIG_HIBERNATION +/* + * The ACPI specification wants us to save NVS memory regions during hibernation + * and to restore them during the subsequent resume. However, it is not certain + * if this mechanism is going to work on all machines, so we allow the user to + * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line + * option. + */ +static bool s4_no_nvs; + +void __init acpi_s4_no_nvs(void) +{ + s4_no_nvs = true; +} + static unsigned long s4_hardware_signature; static struct acpi_table_facs *facs; static bool nosigcheck; @@ -679,7 +680,7 @@ static void acpi_power_off_prepare(void) static void acpi_power_off(void) { /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ - printk("%s called\n", __func__); + printk(KERN_DEBUG "%s called\n", __func__); local_irq_disable(); acpi_enable_wakeup_device(ACPI_STATE_S5); acpi_enter_sleep_state(ACPI_STATE_S5); diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index 775c97a282bd..fec1ae36d431 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -181,14 +181,15 @@ acpi_table_parse_entries(char *id, struct acpi_subtable_header *entry; unsigned int count = 0; unsigned long table_end; + acpi_size tbl_size; if (!handler) return -EINVAL; if (strncmp(id, ACPI_SIG_MADT, 4) == 0) - acpi_get_table(id, acpi_apic_instance, &table_header); + acpi_get_table_with_size(id, acpi_apic_instance, &table_header, &tbl_size); else - acpi_get_table(id, 0, &table_header); + acpi_get_table_with_size(id, 0, &table_header, &tbl_size); if (!table_header) { printk(KERN_WARNING PREFIX "%4.4s not present\n", id); @@ -206,8 +207,10 @@ acpi_table_parse_entries(char *id, table_end) { if (entry->type == entry_id && (!max_entries || count++ < max_entries)) - if (handler(entry, table_end)) + if (handler(entry, table_end)) { + early_acpi_os_unmap_memory((char *)table_header, tbl_size); return -EINVAL; + } entry = (struct acpi_subtable_header *) ((unsigned long)entry + entry->length); @@ -217,6 +220,7 @@ acpi_table_parse_entries(char *id, "%i found\n", id, entry_id, count - max_entries, count); } + early_acpi_os_unmap_memory((char *)table_header, tbl_size); return count; } @@ -241,17 +245,19 @@ acpi_table_parse_madt(enum acpi_madt_type id, int __init acpi_table_parse(char *id, acpi_table_handler handler) { struct acpi_table_header *table = NULL; + acpi_size tbl_size; if (!handler) return -EINVAL; if (strncmp(id, ACPI_SIG_MADT, 4) == 0) - acpi_get_table(id, acpi_apic_instance, &table); + acpi_get_table_with_size(id, acpi_apic_instance, &table, &tbl_size); else - acpi_get_table(id, 0, &table); + acpi_get_table_with_size(id, 0, &table, &tbl_size); if (table) { handler(table); + early_acpi_os_unmap_memory(table, tbl_size); return 0; } else return 1; @@ -265,8 +271,9 @@ int __init acpi_table_parse(char *id, acpi_table_handler handler) static void __init check_multiple_madt(void) { struct acpi_table_header *table = NULL; + acpi_size tbl_size; - acpi_get_table(ACPI_SIG_MADT, 2, &table); + acpi_get_table_with_size(ACPI_SIG_MADT, 2, &table, &tbl_size); if (table) { printk(KERN_WARNING PREFIX "BIOS bug: multiple APIC/MADT found," @@ -275,6 +282,7 @@ static void __init check_multiple_madt(void) "If \"acpi_apic_instance=%d\" works better, " "notify linux-acpi@vger.kernel.org\n", acpi_apic_instance ? 0 : 2); + early_acpi_os_unmap_memory(table, tbl_size); } else acpi_apic_instance = 0; @@ -293,7 +301,12 @@ static void __init check_multiple_madt(void) int __init acpi_table_init(void) { - acpi_initialize_tables(initial_tables, ACPI_MAX_TABLES, 0); + acpi_status status; + + status = acpi_initialize_tables(initial_tables, ACPI_MAX_TABLES, 0); + if (ACPI_FAILURE(status)) + return 1; + check_multiple_madt(); return 0; } diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index f261737636da..bb5ed059114a 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1020,7 +1020,7 @@ acpi_video_device_brightness_seq_show(struct seq_file *seq, void *offset) } seq_printf(seq, "levels: "); - for (i = 0; i < dev->brightness->count; i++) + for (i = 2; i < dev->brightness->count; i++) seq_printf(seq, " %d", dev->brightness->levels[i]); seq_printf(seq, "\ncurrent: %d\n", dev->brightness->curr); @@ -1059,7 +1059,7 @@ acpi_video_device_write_brightness(struct file *file, return -EFAULT; /* validate through the list of available levels */ - for (i = 0; i < dev->brightness->count; i++) + for (i = 2; i < dev->brightness->count; i++) if (level == dev->brightness->levels[i]) { if (ACPI_SUCCESS (acpi_video_device_lcd_set_level(dev, level))) @@ -1260,7 +1260,7 @@ static int acpi_video_bus_POST_info_seq_show(struct seq_file *seq, void *offset) printk(KERN_WARNING PREFIX "This indicates a BIOS bug. Please contact the manufacturer.\n"); } - printk("%llx\n", options); + printk(KERN_WARNING "%llx\n", options); seq_printf(seq, "can POST: <integrated video>"); if (options & 2) seq_printf(seq, " <PCI video>"); @@ -1712,7 +1712,7 @@ acpi_video_get_next_level(struct acpi_video_device *device, max = max_below = 0; min = min_above = 255; /* Find closest level to level_current */ - for (i = 0; i < device->brightness->count; i++) { + for (i = 2; i < device->brightness->count; i++) { l = device->brightness->levels[i]; if (abs(l - level_current) < abs(delta)) { delta = l - level_current; @@ -1722,7 +1722,7 @@ acpi_video_get_next_level(struct acpi_video_device *device, } /* Ajust level_current to closest available level */ level_current += delta; - for (i = 0; i < device->brightness->count; i++) { + for (i = 2; i < device->brightness->count; i++) { l = device->brightness->levels[i]; if (l < min) min = l; @@ -2006,6 +2006,12 @@ static int acpi_video_bus_add(struct acpi_device *device) device->pnp.bus_id[3] = '0' + instance; instance ++; } + /* a hack to fix the duplicate name "VGA" problem on Pa 3553 */ + if (!strcmp(device->pnp.bus_id, "VGA")) { + if (instance) + device->pnp.bus_id[3] = '0' + instance; + instance++; + } video->device = device; strcpy(acpi_device_name(device), ACPI_VIDEO_BUS_NAME); diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 503a908afc80..0bcf26464670 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -112,11 +112,11 @@ config ATA_PIIX If unsure, say N. config SATA_MV - tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Marvell SATA support" help This option enables support for the Marvell Serial ATA family. - Currently supports 88SX[56]0[48][01] chips. + Currently supports 88SX[56]0[48][01] PCI(-X) chips, + as well as the newer [67]042 PCI-X/PCIe and SOC devices. If unsure, say N. diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 96039671e3b9..a603bbf9b1b7 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -61,9 +61,14 @@ #define EM_MSG_LED_VALUE_ON 0x00010000 static int ahci_skip_host_reset; +static int ahci_ignore_sss; + module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444); MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)"); +module_param_named(ignore_sss, ahci_ignore_sss, int, 0444); +MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)"); + static int ahci_enable_alpm(struct ata_port *ap, enum link_pm policy); static void ahci_disable_alpm(struct ata_port *ap); @@ -2548,6 +2553,32 @@ static void ahci_p5wdh_workaround(struct ata_host *host) } } +static bool ahci_broken_system_poweroff(struct pci_dev *pdev) +{ + static const struct dmi_system_id broken_systems[] = { + { + .ident = "HP Compaq nx6310", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, + + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(broken_systems); + + if (dmi) { + unsigned long slot = (unsigned long)dmi->driver_data; + /* apply the quirk only to on-board controllers */ + return slot == PCI_SLOT(pdev->devfn); + } + + return false; +} + static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; @@ -2647,6 +2678,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } } + if (ahci_broken_system_poweroff(pdev)) { + pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN; + dev_info(&pdev->dev, + "quirky BIOS, skipping spindown on poweroff\n"); + } + /* CAP.NP sometimes indicate the index of the last enabled * port, at other times, that of the last possible port, so * determining the maximum port number requires looking at @@ -2660,8 +2697,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) host->iomap = pcim_iomap_table(pdev); host->private_data = hpriv; - if (!(hpriv->cap & HOST_CAP_SSS)) + if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) host->flags |= ATA_HOST_PARALLEL_SCAN; + else + printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n"); if (pi.flags & ATA_FLAG_EM) ahci_reset_em(host); diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 887d8f46a287..54961c0b2c73 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1387,6 +1387,32 @@ static void piix_iocfg_bit18_quirk(struct ata_host *host) } } +static bool piix_broken_system_poweroff(struct pci_dev *pdev) +{ + static const struct dmi_system_id broken_systems[] = { + { + .ident = "HP Compaq 2510p", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 2510p"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, + + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(broken_systems); + + if (dmi) { + unsigned long slot = (unsigned long)dmi->driver_data; + /* apply the quirk only to on-board controllers */ + return slot == PCI_SLOT(pdev->devfn); + } + + return false; +} + /** * piix_init_one - Register PIIX ATA PCI device with kernel services * @pdev: PCI device to register @@ -1422,6 +1448,14 @@ static int __devinit piix_init_one(struct pci_dev *pdev, if (!in_module_init) return -ENODEV; + if (piix_broken_system_poweroff(pdev)) { + piix_port_info[ent->driver_data].flags |= + ATA_FLAG_NO_POWEROFF_SPINDOWN | + ATA_FLAG_NO_HIBERNATE_SPINDOWN; + dev_info(&pdev->dev, "quirky BIOS, skipping spindown " + "on poweroff and hibernation\n"); + } + port_info[0] = piix_port_info[ent->driver_data]; port_info[1] = piix_port_info[ent->driver_data]; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 88c242856dae..9fbf0595f3d4 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -164,6 +164,11 @@ MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); +static bool ata_sstatus_online(u32 sstatus) +{ + return (sstatus & 0xf) == 0x3; +} + /** * ata_link_next - link iteration helper * @link: the previous link, NULL to start @@ -1015,18 +1020,6 @@ static const char *sata_spd_string(unsigned int spd) return spd_str[spd - 1]; } -void ata_dev_disable(struct ata_device *dev) -{ - if (ata_dev_enabled(dev)) { - if (ata_msg_drv(dev->link->ap)) - ata_dev_printk(dev, KERN_WARNING, "disabled\n"); - ata_acpi_on_disable(dev); - ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | - ATA_DNXFER_QUIET); - dev->class++; - } -} - static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy) { struct ata_link *link = dev->link; @@ -2239,6 +2232,40 @@ retry: return rc; } +static int ata_do_link_spd_horkage(struct ata_device *dev) +{ + struct ata_link *plink = ata_dev_phys_link(dev); + u32 target, target_limit; + + if (!sata_scr_valid(plink)) + return 0; + + if (dev->horkage & ATA_HORKAGE_1_5_GBPS) + target = 1; + else + return 0; + + target_limit = (1 << target) - 1; + + /* if already on stricter limit, no need to push further */ + if (plink->sata_spd_limit <= target_limit) + return 0; + + plink->sata_spd_limit = target_limit; + + /* Request another EH round by returning -EAGAIN if link is + * going faster than the target speed. Forward progress is + * guaranteed by setting sata_spd_limit to target_limit above. + */ + if (plink->sata_spd > target) { + ata_dev_printk(dev, KERN_INFO, + "applying link speed limit horkage to %s\n", + sata_spd_string(target)); + return -EAGAIN; + } + return 0; +} + static inline u8 ata_dev_knobble(struct ata_device *dev) { struct ata_port *ap = dev->link->ap; @@ -2329,6 +2356,10 @@ int ata_dev_configure(struct ata_device *dev) return 0; } + rc = ata_do_link_spd_horkage(dev); + if (rc) + return rc; + /* let ACPI work its magic */ rc = ata_acpi_on_devcfg(dev); if (rc) @@ -2784,7 +2815,7 @@ int ata_bus_probe(struct ata_port *ap) /* This is the last chance, better to slow * down than lose it. */ - sata_down_spd_limit(&ap->link); + sata_down_spd_limit(&ap->link, 0); ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); } } @@ -2880,21 +2911,27 @@ void ata_port_disable(struct ata_port *ap) /** * sata_down_spd_limit - adjust SATA spd limit downward * @link: Link to adjust SATA spd limit for + * @spd_limit: Additional limit * * Adjust SATA spd limit of @link downward. Note that this * function only adjusts the limit. The change must be applied * using sata_set_spd(). * + * If @spd_limit is non-zero, the speed is limited to equal to or + * lower than @spd_limit if such speed is supported. If + * @spd_limit is slower than any supported speed, only the lowest + * supported speed is allowed. + * * LOCKING: * Inherited from caller. * * RETURNS: * 0 on success, negative errno on failure */ -int sata_down_spd_limit(struct ata_link *link) +int sata_down_spd_limit(struct ata_link *link, u32 spd_limit) { u32 sstatus, spd, mask; - int rc, highbit; + int rc, bit; if (!sata_scr_valid(link)) return -EOPNOTSUPP; @@ -2903,7 +2940,7 @@ int sata_down_spd_limit(struct ata_link *link) * If not, use cached value in link->sata_spd. */ rc = sata_scr_read(link, SCR_STATUS, &sstatus); - if (rc == 0) + if (rc == 0 && ata_sstatus_online(sstatus)) spd = (sstatus >> 4) & 0xf; else spd = link->sata_spd; @@ -2913,8 +2950,8 @@ int sata_down_spd_limit(struct ata_link *link) return -EINVAL; /* unconditionally mask off the highest bit */ - highbit = fls(mask) - 1; - mask &= ~(1 << highbit); + bit = fls(mask) - 1; + mask &= ~(1 << bit); /* Mask off all speeds higher than or equal to the current * one. Force 1.5Gbps if current SPD is not available. @@ -2928,6 +2965,15 @@ int sata_down_spd_limit(struct ata_link *link) if (!mask) return -EINVAL; + if (spd_limit) { + if (mask & ((1 << spd_limit) - 1)) + mask &= (1 << spd_limit) - 1; + else { + bit = ffs(mask) - 1; + mask = 1 << bit; + } + } + link->sata_spd_limit = mask; ata_link_printk(link, KERN_WARNING, "limiting SATA link speed to %s\n", @@ -4215,6 +4261,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Devices that do not need bridging limits applied */ { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, + /* Devices which aren't very happy with higher link speeds */ + { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, }, + /* End Marker */ { } }; @@ -4709,8 +4758,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) /** * ata_qc_new - Request an available ATA command, for queueing - * @ap: Port associated with device @dev - * @dev: Device from whom we request an available command structure + * @ap: target port * * LOCKING: * None. @@ -5175,7 +5223,7 @@ bool ata_phys_link_online(struct ata_link *link) u32 sstatus; if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && - (sstatus & 0xf) == 0x3) + ata_sstatus_online(sstatus)) return true; return false; } @@ -5199,7 +5247,7 @@ bool ata_phys_link_offline(struct ata_link *link) u32 sstatus; if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && - (sstatus & 0xf) != 0x3) + !ata_sstatus_online(sstatus)) return true; return false; } @@ -5412,8 +5460,8 @@ void ata_dev_init(struct ata_device *dev) dev->horkage = 0; spin_unlock_irqrestore(ap->lock, flags); - memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0, - sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET); + memset((void *)dev + ATA_DEVICE_CLEAR_BEGIN, 0, + ATA_DEVICE_CLEAR_END - ATA_DEVICE_CLEAR_BEGIN); dev->pio_mask = UINT_MAX; dev->mwdma_mask = UINT_MAX; dev->udma_mask = UINT_MAX; diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 8147a8386370..ce2ef0475339 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -82,6 +82,10 @@ enum { ATA_EH_FASTDRAIN_INTERVAL = 3000, ATA_EH_UA_TRIES = 5, + + /* probe speed down parameters, see ata_eh_schedule_probe() */ + ATA_EH_PROBE_TRIAL_INTERVAL = 60000, /* 1 min */ + ATA_EH_PROBE_TRIALS = 2, }; /* The following table determines how we sequence resets. Each entry @@ -1176,6 +1180,32 @@ void ata_eh_qc_retry(struct ata_queued_cmd *qc) } /** + * ata_dev_disable - disable ATA device + * @dev: ATA device to disable + * + * Disable @dev. + * + * Locking: + * EH context. + */ +void ata_dev_disable(struct ata_device *dev) +{ + if (!ata_dev_enabled(dev)) + return; + + if (ata_msg_drv(dev->link->ap)) + ata_dev_printk(dev, KERN_WARNING, "disabled\n"); + ata_acpi_on_disable(dev); + ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | ATA_DNXFER_QUIET); + dev->class++; + + /* From now till the next successful probe, ering is used to + * track probe failures. Clear accumulated device error info. + */ + ata_ering_clear(&dev->ering); +} + +/** * ata_eh_detach_dev - detach ATA device * @dev: ATA device to detach * @@ -1849,7 +1879,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, /* speed down? */ if (verdict & ATA_EH_SPDN_SPEED_DOWN) { /* speed down SATA link speed if possible */ - if (sata_down_spd_limit(link) == 0) { + if (sata_down_spd_limit(link, 0) == 0) { action |= ATA_EH_RESET; goto done; } @@ -2601,11 +2631,11 @@ int ata_eh_reset(struct ata_link *link, int classify, } if (try == max_tries - 1) { - sata_down_spd_limit(link); + sata_down_spd_limit(link, 0); if (slave) - sata_down_spd_limit(slave); + sata_down_spd_limit(slave, 0); } else if (rc == -EPIPE) - sata_down_spd_limit(failed_link); + sata_down_spd_limit(failed_link, 0); if (hardreset) reset = hardreset; @@ -2744,6 +2774,8 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, readid_flags, dev->id); switch (rc) { case 0: + /* clear error info accumulated during probe */ + ata_ering_clear(&dev->ering); new_mask |= 1 << dev->devno; break; case -ENOENT: @@ -2947,9 +2979,24 @@ static int ata_eh_skip_recovery(struct ata_link *link) return 1; } +static int ata_count_probe_trials_cb(struct ata_ering_entry *ent, void *void_arg) +{ + u64 interval = msecs_to_jiffies(ATA_EH_PROBE_TRIAL_INTERVAL); + u64 now = get_jiffies_64(); + int *trials = void_arg; + + if (ent->timestamp < now - min(now, interval)) + return -1; + + (*trials)++; + return 0; +} + static int ata_eh_schedule_probe(struct ata_device *dev) { struct ata_eh_context *ehc = &dev->link->eh_context; + struct ata_link *link = ata_dev_phys_link(dev); + int trials = 0; if (!(ehc->i.probe_mask & (1 << dev->devno)) || (ehc->did_probe_mask & (1 << dev->devno))) @@ -2962,6 +3009,25 @@ static int ata_eh_schedule_probe(struct ata_device *dev) ehc->saved_xfer_mode[dev->devno] = 0; ehc->saved_ncq_enabled &= ~(1 << dev->devno); + /* Record and count probe trials on the ering. The specific + * error mask used is irrelevant. Because a successful device + * detection clears the ering, this count accumulates only if + * there are consecutive failed probes. + * + * If the count is equal to or higher than ATA_EH_PROBE_TRIALS + * in the last ATA_EH_PROBE_TRIAL_INTERVAL, link speed is + * forced to 1.5Gbps. + * + * This is to work around cases where failed link speed + * negotiation results in device misdetection leading to + * infinite DEVXCHG or PHRDY CHG events. + */ + ata_ering_record(&dev->ering, 0, AC_ERR_OTHER); + ata_ering_map(&dev->ering, ata_count_probe_trials_cb, &trials); + + if (trials > ATA_EH_PROBE_TRIALS) + sata_down_spd_limit(link, 1); + return 1; } @@ -2969,7 +3035,11 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err) { struct ata_eh_context *ehc = &dev->link->eh_context; - ehc->tries[dev->devno]--; + /* -EAGAIN from EH routine indicates retry without prejudice. + * The requester is responsible for ensuring forward progress. + */ + if (err != -EAGAIN) + ehc->tries[dev->devno]--; switch (err) { case -ENODEV: @@ -2979,12 +3049,13 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err) /* give it just one more chance */ ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1); case -EIO: - if (ehc->tries[dev->devno] == 1 && dev->pio_mode > XFER_PIO_0) { + if (ehc->tries[dev->devno] == 1) { /* This is the last chance, better to slow * down than lose it. */ - sata_down_spd_limit(ata_dev_phys_link(dev)); - ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); + sata_down_spd_limit(ata_dev_phys_link(dev), 0); + if (dev->pio_mode > XFER_PIO_0) + ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); } } diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 98ca07a2db87..619f2c33950e 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -729,7 +729,7 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap, if (tries) { /* consecutive revalidation failures? speed down */ if (reval_failed) - sata_down_spd_limit(link); + sata_down_spd_limit(link, 0); else reval_failed = 1; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index a1a6e6298c33..b9747fa59e54 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -46,6 +46,7 @@ #include <linux/libata.h> #include <linux/hdreg.h> #include <linux/uaccess.h> +#include <linux/suspend.h> #include "libata.h" @@ -414,6 +415,7 @@ int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, /** * ata_get_identity - Handler for HDIO_GET_IDENTITY ioctl + * @ap: target port * @sdev: SCSI device to get identify data for * @arg: User buffer area for identify data * @@ -1303,6 +1305,17 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ } else { + /* Some odd clown BIOSen issue spindown on power off (ACPI S4 + * or S5) causing some drives to spin up and down again. + */ + if ((qc->ap->flags & ATA_FLAG_NO_POWEROFF_SPINDOWN) && + system_state == SYSTEM_POWER_OFF) + goto skip; + + if ((qc->ap->flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) && + system_entering_hibernation()) + goto skip; + /* XXX: This is for backward compatibility, will be * removed. Read Documentation/feature-removal-schedule.txt * for more info. @@ -1326,8 +1339,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) scmd->scsi_done = qc->scsidone; qc->scsidone = ata_delayed_done; } - scmd->result = SAM_STAT_GOOD; - return 1; + goto skip; } /* Issue ATA STANDBY IMMEDIATE command */ @@ -1343,10 +1355,13 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) return 0; -invalid_fld: + invalid_fld: ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); /* "Invalid field in cbd" */ return 1; + skip: + scmd->result = SAM_STAT_GOOD; + return 1; } diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 5a4aad123c42..0b299b0f8172 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1322,7 +1322,7 @@ fsm_start: * condition. Mark hint. */ ata_ehi_push_desc(ehi, "ST-ATA: " - "DRQ=1 with device error, " + "DRQ=0 without device error, " "dev_stat 0x%X", status); qc->err_mask |= AC_ERR_HSM | AC_ERR_NODEV_HINT; @@ -1358,6 +1358,16 @@ fsm_start: qc->err_mask |= AC_ERR_HSM; } + /* There are oddball controllers with + * status register stuck at 0x7f and + * lbal/m/h at zero which makes it + * pass all other presence detection + * mechanisms we have. Set NODEV_HINT + * for it. Kernel bz#7241. + */ + if (status == 0x7f) + qc->err_mask |= AC_ERR_NODEV_HINT; + /* ata_pio_sectors() might change the * state to HSM_ST_LAST. so, the state * is changed after ata_pio_sectors(). diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index fe2839e58774..cea8014cd87e 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -79,7 +79,6 @@ extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, u64 block, u32 n_block, unsigned int tf_flags, unsigned int tag); extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev); -extern void ata_dev_disable(struct ata_device *dev); extern void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay); extern void ata_port_flush_task(struct ata_port *ap); @@ -100,7 +99,7 @@ extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags); extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class, unsigned int readid_flags); extern int ata_dev_configure(struct ata_device *dev); -extern int sata_down_spd_limit(struct ata_link *link); +extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit); extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel); extern void ata_sg_clean(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); @@ -160,6 +159,7 @@ extern void ata_scsi_error(struct Scsi_Host *host); extern void ata_port_wait_eh(struct ata_port *ap); extern void ata_eh_fastdrain_timerfn(unsigned long arg); extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc); +extern void ata_dev_disable(struct ata_device *dev); extern void ata_eh_detach_dev(struct ata_device *dev); extern void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev, unsigned int action); diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index 3080f371222c..f1b26f7c8e4d 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -12,7 +12,7 @@ * * Probe code based on drivers/ide/legacy/qd65xx.c * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by - * Samuel Thibault <samuel.thibault@fnac.net> + * Samuel Thibault <samuel.thibault@ens-lyon.org> */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index c2e6fb9f2ef9..ebfcda26d639 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -63,8 +63,6 @@ static inline void rb532_pata_finish_io(struct ata_port *ap) ata_sff_sync might be sufficient. */ ata_sff_dma_pause(ap); ndelay(RB500_CF_IO_DELAY); - - set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); } static void rb532_pata_exec_command(struct ata_port *ap, diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 681169c9c640..79a6c9a0b721 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -86,6 +86,10 @@ enum { VIA_SATA_PATA = 0x800, /* SATA/PATA combined configuration */ }; +enum { + VIA_IDFLAG_SINGLE = (1 << 0), /* single channel controller) */ +}; + /* * VIA SouthBridge chips. */ @@ -97,8 +101,12 @@ static const struct via_isa_bridge { u8 rev_max; u16 flags; } via_isa_bridges[] = { + { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, + VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, + { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, + VIA_UDMA_133 | VIA_BAD_AST }, { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, @@ -122,6 +130,8 @@ static const struct via_isa_bridge { { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO }, { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK }, { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, + { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, + VIA_UDMA_133 | VIA_BAD_AST }, { NULL } }; @@ -460,6 +470,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) static int printed_version; u8 enable; u32 timing; + unsigned long flags = id->driver_data; int rc; if (!printed_version++) @@ -469,9 +480,13 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (rc) return rc; + if (flags & VIA_IDFLAG_SINGLE) + ppi[1] = &ata_dummy_port_info; + /* To find out how the IDE will behave and what features we actually have to look at the bridge not the IDE controller */ - for (config = via_isa_bridges; config->id; config++) + for (config = via_isa_bridges; config->id != PCI_DEVICE_ID_VIA_ANON; + config++) if ((isa = pci_get_device(PCI_VENDOR_ID_VIA + !!(config->flags & VIA_BAD_ID), config->id, NULL))) { @@ -482,10 +497,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) pci_dev_put(isa); } - if (!config->id) { - printk(KERN_WARNING "via: Unknown VIA SouthBridge, disabling.\n"); - return -ENODEV; - } pci_dev_put(isa); if (!(config->flags & VIA_NO_ENABLES)) { @@ -587,6 +598,7 @@ static const struct pci_device_id via[] = { { PCI_VDEVICE(VIA, 0x1571), }, { PCI_VDEVICE(VIA, 0x3164), }, { PCI_VDEVICE(VIA, 0x5324), }, + { PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE }, { }, }; diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 86918634a4c5..4ae1a4138b47 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -33,10 +33,6 @@ * * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it). * - * --> Investigate problems with PCI Message Signalled Interrupts (MSI). - * - * --> Cache frequently-accessed registers in mv_port_priv to reduce overhead. - * * --> Develop a low-power-consumption strategy, and implement it. * * --> [Experiment, low priority] Investigate interrupt coalescing. @@ -72,7 +68,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.24" +#define DRV_VERSION "1.25" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -351,8 +347,6 @@ enum { EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */ - GEN_II_NCQ_MAX_SECTORS = 256, /* max sects/io on Gen2 w/NCQ */ - /* Host private flags (hp_flags) */ MV_HP_FLAG_MSI = (1 << 0), MV_HP_ERRATA_50XXB0 = (1 << 1), @@ -669,8 +663,8 @@ static const struct pci_device_id mv_pci_tbl[] = { { PCI_VDEVICE(MARVELL, 0x5081), chip_508x }, /* RocketRAID 1720/174x have different identifiers */ { PCI_VDEVICE(TTI, 0x1720), chip_6042 }, - { PCI_VDEVICE(TTI, 0x1740), chip_508x }, - { PCI_VDEVICE(TTI, 0x1742), chip_508x }, + { PCI_VDEVICE(TTI, 0x1740), chip_6042 }, + { PCI_VDEVICE(TTI, 0x1742), chip_6042 }, { PCI_VDEVICE(MARVELL, 0x6040), chip_604x }, { PCI_VDEVICE(MARVELL, 0x6041), chip_604x }, @@ -883,19 +877,15 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio, struct mv_host_priv *hpriv = ap->host->private_data; int hardport = mv_hardport_from_port(ap->port_no); void __iomem *hc_mmio = mv_hc_base_from_port( - mv_host_base(ap->host), hardport); - u32 hc_irq_cause, ipending; + mv_host_base(ap->host), ap->port_no); + u32 hc_irq_cause; /* clear EDMA event indicators, if any */ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - /* clear EDMA interrupt indicator, if any */ - hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); - ipending = (DEV_IRQ | DMA_IRQ) << hardport; - if (hc_irq_cause & ipending) { - writelfl(hc_irq_cause & ~ipending, - hc_mmio + HC_IRQ_CAUSE_OFS); - } + /* clear pending irq events */ + hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); + writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); mv_edma_cfg(ap, want_ncq); @@ -1099,20 +1089,12 @@ static void mv6_dev_config(struct ata_device *adev) * * Gen-II does not support NCQ over a port multiplier * (no FIS-based switching). - * - * We don't have hob_nsect when doing NCQ commands on Gen-II. - * See mv_qc_prep() for more info. */ if (adev->flags & ATA_DFLAG_NCQ) { if (sata_pmp_attached(adev->link->ap)) { adev->flags &= ~ATA_DFLAG_NCQ; ata_dev_printk(adev, KERN_INFO, "NCQ disabled for command-based switching\n"); - } else if (adev->max_sectors > GEN_II_NCQ_MAX_SECTORS) { - adev->max_sectors = GEN_II_NCQ_MAX_SECTORS; - ata_dev_printk(adev, KERN_INFO, - "max_sectors limited to %u for NCQ\n", - adev->max_sectors); } } } @@ -1450,7 +1432,8 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) * only 11 bytes...so we must pick and choose required * registers based on the command. So, we drop feature and * hob_feature for [RW] DMA commands, but they are needed for - * NCQ. NCQ will drop hob_nsect. + * NCQ. NCQ will drop hob_nsect, which is not needed there + * (nsect is used only for the tag; feat/hob_feat hold true nsect). */ switch (tf->command) { case ATA_CMD_READ: @@ -2214,9 +2197,15 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) struct ata_host *host = dev_instance; struct mv_host_priv *hpriv = host->private_data; unsigned int handled = 0; + int using_msi = hpriv->hp_flags & MV_HP_FLAG_MSI; u32 main_irq_cause, pending_irqs; spin_lock(&host->lock); + + /* for MSI: block new interrupts while in here */ + if (using_msi) + writel(0, hpriv->main_irq_mask_addr); + main_irq_cause = readl(hpriv->main_irq_cause_addr); pending_irqs = main_irq_cause & hpriv->main_irq_mask; /* @@ -2230,6 +2219,11 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) handled = mv_host_intr(host, pending_irqs); } spin_unlock(&host->lock); + + /* for MSI: unmask; interrupt cause bits will retrigger now */ + if (using_msi) + writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr); + return IRQ_RETVAL(handled); } @@ -2821,8 +2815,7 @@ static void mv_eh_thaw(struct ata_port *ap) writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); /* clear pending irq events */ - hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); - hc_irq_cause &= ~((DEV_IRQ | DMA_IRQ) << hardport); + hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); mv_enable_port_irqs(ap, ERR_IRQ); @@ -3075,6 +3068,9 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS; } + /* initialize shadow irq mask with register's value */ + hpriv->main_irq_mask = readl(hpriv->main_irq_mask_addr); + /* global interrupt mask: 0 == mask everything */ mv_set_main_irq_mask(host, ~0, 0); @@ -3430,9 +3426,9 @@ static int mv_pci_init_one(struct pci_dev *pdev, if (rc) return rc; - /* Enable interrupts */ - if (msi && pci_enable_msi(pdev)) - pci_intx(pdev, 1); + /* Enable message-switched interrupts, if requested */ + if (msi && pci_enable_msi(pdev) == 0) + hpriv->hp_flags |= MV_HP_FLAG_MSI; mv_dump_pci_cfg(pdev, 0x68); mv_print_info(host); diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 6f1460614325..444af0415ca1 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -305,10 +305,10 @@ static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance); static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); +static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static void nv_nf2_freeze(struct ata_port *ap); static void nv_nf2_thaw(struct ata_port *ap); -static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline); static void nv_ck804_freeze(struct ata_port *ap); static void nv_ck804_thaw(struct ata_port *ap); static int nv_adma_slave_config(struct scsi_device *sdev); @@ -352,6 +352,7 @@ enum nv_host_type NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */ CK804, ADMA, + MCP5x, SWNCQ, }; @@ -363,10 +364,10 @@ static const struct pci_device_id nv_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2), CK804 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA), CK804 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2), CK804 }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), SWNCQ }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), SWNCQ }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), SWNCQ }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), SWNCQ }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), MCP5x }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), MCP5x }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), MCP5x }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), MCP5x }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC }, @@ -432,14 +433,19 @@ static struct ata_port_operations nv_nf2_ops = { .inherits = &nv_common_ops, .freeze = nv_nf2_freeze, .thaw = nv_nf2_thaw, - .hardreset = nv_nf2_hardreset, + .hardreset = nv_noclassify_hardreset, }; -/* CK804 finally gets hardreset right */ +/* For initial probing after boot and hot plugging, hardreset mostly + * works fine on CK804 but curiously, reprobing on the initial port by + * rescanning or rmmod/insmod fails to acquire the initial D2H Reg FIS + * in somewhat undeterministic way. Use noclassify hardreset. + */ static struct ata_port_operations nv_ck804_ops = { .inherits = &nv_common_ops, .freeze = nv_ck804_freeze, .thaw = nv_ck804_thaw, + .hardreset = nv_noclassify_hardreset, .host_stop = nv_ck804_host_stop, }; @@ -467,8 +473,19 @@ static struct ata_port_operations nv_adma_ops = { .host_stop = nv_adma_host_stop, }; +/* Kernel bz#12351 reports that when SWNCQ is enabled, for hotplug to + * work, hardreset should be used and hardreset can't report proper + * signature, which suggests that mcp5x is closer to nf2 as long as + * reset quirkiness is concerned. Define separate ops for mcp5x with + * nv_noclassify_hardreset(). + */ +static struct ata_port_operations nv_mcp5x_ops = { + .inherits = &nv_common_ops, + .hardreset = nv_noclassify_hardreset, +}; + static struct ata_port_operations nv_swncq_ops = { - .inherits = &nv_generic_ops, + .inherits = &nv_mcp5x_ops, .qc_defer = ata_std_qc_defer, .qc_prep = nv_swncq_qc_prep, @@ -531,6 +548,15 @@ static const struct ata_port_info nv_port_info[] = { .port_ops = &nv_adma_ops, .private_data = NV_PI_PRIV(nv_adma_interrupt, &nv_adma_sht), }, + /* MCP5x */ + { + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_mcp5x_ops, + .private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht), + }, /* SWNCQ */ { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | @@ -1530,6 +1556,17 @@ static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) return 0; } +static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + bool online; + int rc; + + rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, + &online, NULL); + return online ? -EAGAIN : rc; +} + static void nv_nf2_freeze(struct ata_port *ap) { void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr; @@ -1554,17 +1591,6 @@ static void nv_nf2_thaw(struct ata_port *ap) iowrite8(mask, scr_addr + NV_INT_ENABLE); } -static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - bool online; - int rc; - - rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, - &online, NULL); - return online ? -EAGAIN : rc; -} - static void nv_ck804_freeze(struct ata_port *ap) { void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR]; @@ -2355,14 +2381,9 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (type == CK804 && adma_enabled) { dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n"); type = ADMA; - } - - if (type == SWNCQ) { - if (swncq_enabled) - dev_printk(KERN_NOTICE, &pdev->dev, - "Using SWNCQ mode\n"); - else - type = GENERIC; + } else if (type == MCP5x && swncq_enabled) { + dev_printk(KERN_NOTICE, &pdev->dev, "Using SWNCQ mode\n"); + type = SWNCQ; } ppi[0] = &nv_port_info[type]; diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 564c142b03b0..d0091609e210 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -44,6 +44,7 @@ #include <linux/device.h> #include <scsi/scsi_host.h> #include <linux/libata.h> +#include <linux/dmi.h> #define DRV_NAME "sata_sil" #define DRV_VERSION "2.4" @@ -323,7 +324,7 @@ static void sil_fill_sg(struct ata_queued_cmd *qc) prd->addr = cpu_to_le32(addr); prd->flags_len = cpu_to_le32(sg_len); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, sg_len); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", si, addr, sg_len); last_prd = prd; prd++; @@ -695,11 +696,38 @@ static void sil_init_controller(struct ata_host *host) } } +static bool sil_broken_system_poweroff(struct pci_dev *pdev) +{ + static const struct dmi_system_id broken_systems[] = { + { + .ident = "HP Compaq nx6325", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x12UL, + }, + + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(broken_systems); + + if (dmi) { + unsigned long slot = (unsigned long)dmi->driver_data; + /* apply the quirk only to on-board controllers */ + return slot == PCI_SLOT(pdev->devfn); + } + + return false; +} + static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; int board_id = ent->driver_data; - const struct ata_port_info *ppi[] = { &sil_port_info[board_id], NULL }; + struct ata_port_info pi = sil_port_info[board_id]; + const struct ata_port_info *ppi[] = { &pi, NULL }; struct ata_host *host; void __iomem *mmio_base; int n_ports, rc; @@ -713,6 +741,13 @@ static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (board_id == sil_3114) n_ports = 4; + if (sil_broken_system_poweroff(pdev)) { + pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN | + ATA_FLAG_NO_HIBERNATE_SPINDOWN; + dev_info(&pdev->dev, "quirky BIOS, skipping spindown " + "on poweroff and hibernation\n"); + } + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); if (!host) return -ENOMEM; diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c index 72fc0f799a64..89d7a6e94c9c 100644 --- a/drivers/atm/solos-pci.c +++ b/drivers/atm/solos-pci.c @@ -685,6 +685,7 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id) out_release_regions: pci_release_regions(dev); out: + kfree(card); return err; } diff --git a/drivers/base/core.c b/drivers/base/core.c index 55e530942ab0..f3eae630e589 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1280,7 +1280,7 @@ EXPORT_SYMBOL_GPL(__root_device_register); /** * root_device_unregister - unregister and free a root device - * @root: device going away. + * @dev: device going away * * This function unregisters and cleans up a device that was created by * root_device_register(). diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index 719ee5c1c8d9..5b257a57bc57 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -107,7 +107,7 @@ static SYSDEV_ATTR(crash_notes, 0400, show_crash_notes, NULL); /* * Print cpu online, possible, present, and system maps */ -static ssize_t print_cpus_map(char *buf, cpumask_t *map) +static ssize_t print_cpus_map(char *buf, const struct cpumask *map) { int n = cpulist_scnprintf(buf, PAGE_SIZE-2, map); diff --git a/drivers/base/topology.c b/drivers/base/topology.c index a778fb52b11f..bf6b13206d00 100644 --- a/drivers/base/topology.c +++ b/drivers/base/topology.c @@ -31,7 +31,10 @@ #include <linux/hardirq.h> #include <linux/topology.h> -#define define_one_ro(_name) \ +#define define_one_ro_named(_name, _func) \ +static SYSDEV_ATTR(_name, 0444, _func, NULL) + +#define define_one_ro(_name) \ static SYSDEV_ATTR(_name, 0444, show_##_name, NULL) #define define_id_show_func(name) \ @@ -42,8 +45,8 @@ static ssize_t show_##name(struct sys_device *dev, \ return sprintf(buf, "%d\n", topology_##name(cpu)); \ } -#if defined(topology_thread_siblings) || defined(topology_core_siblings) -static ssize_t show_cpumap(int type, cpumask_t *mask, char *buf) +#if defined(topology_thread_cpumask) || defined(topology_core_cpumask) +static ssize_t show_cpumap(int type, const struct cpumask *mask, char *buf) { ptrdiff_t len = PTR_ALIGN(buf + PAGE_SIZE - 1, PAGE_SIZE) - buf; int n = 0; @@ -65,7 +68,7 @@ static ssize_t show_##name(struct sys_device *dev, \ struct sysdev_attribute *attr, char *buf) \ { \ unsigned int cpu = dev->id; \ - return show_cpumap(0, &(topology_##name(cpu)), buf); \ + return show_cpumap(0, topology_##name(cpu), buf); \ } #define define_siblings_show_list(name) \ @@ -74,7 +77,7 @@ static ssize_t show_##name##_list(struct sys_device *dev, \ char *buf) \ { \ unsigned int cpu = dev->id; \ - return show_cpumap(1, &(topology_##name(cpu)), buf); \ + return show_cpumap(1, topology_##name(cpu), buf); \ } #else @@ -82,9 +85,7 @@ static ssize_t show_##name##_list(struct sys_device *dev, \ static ssize_t show_##name(struct sys_device *dev, \ struct sysdev_attribute *attr, char *buf) \ { \ - unsigned int cpu = dev->id; \ - cpumask_t mask = topology_##name(cpu); \ - return show_cpumap(0, &mask, buf); \ + return show_cpumap(0, topology_##name(dev->id), buf); \ } #define define_siblings_show_list(name) \ @@ -92,9 +93,7 @@ static ssize_t show_##name##_list(struct sys_device *dev, \ struct sysdev_attribute *attr, \ char *buf) \ { \ - unsigned int cpu = dev->id; \ - cpumask_t mask = topology_##name(cpu); \ - return show_cpumap(1, &mask, buf); \ + return show_cpumap(1, topology_##name(dev->id), buf); \ } #endif @@ -107,13 +106,13 @@ define_one_ro(physical_package_id); define_id_show_func(core_id); define_one_ro(core_id); -define_siblings_show_func(thread_siblings); -define_one_ro(thread_siblings); -define_one_ro(thread_siblings_list); +define_siblings_show_func(thread_cpumask); +define_one_ro_named(thread_siblings, show_thread_cpumask); +define_one_ro_named(thread_siblings_list, show_thread_cpumask_list); -define_siblings_show_func(core_siblings); -define_one_ro(core_siblings); -define_one_ro(core_siblings_list); +define_siblings_show_func(core_cpumask); +define_one_ro_named(core_siblings, show_core_cpumask); +define_one_ro_named(core_siblings_list, show_core_cpumask_list); static struct attribute *default_attrs[] = { &attr_physical_package_id.attr, diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 34f80fa6fed1..8299e2d3b611 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -549,6 +549,15 @@ static void do_nbd_request(struct request_queue * q) BUG_ON(lo->magic != LO_MAGIC); + if (unlikely(!lo->sock)) { + printk(KERN_ERR "%s: Attempted send on closed socket\n", + lo->disk->disk_name); + req->errors++; + nbd_end_request(req); + spin_lock_irq(q->queue_lock); + continue; + } + spin_lock_irq(&lo->queue_lock); list_add_tail(&req->queuelist, &lo->waiting_queue); spin_unlock_irq(&lo->queue_lock); diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index f5be8081cd81..735bbe2be51a 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -761,7 +761,7 @@ source "drivers/char/hw_random/Kconfig" config NVRAM tristate "/dev/nvram support" - depends on ATARI || X86 || ARM || GENERIC_NVRAM + depends on ATARI || X86 || (ARM && RTC_DRV_CMOS) || GENERIC_NVRAM ---help--- If you say Y here and create a character special file /dev/nvram with major number 10 and minor number 144 using mknod ("man mknod"), diff --git a/drivers/char/selection.c b/drivers/char/selection.c index f29fbe9b8ed7..cb8ca5698963 100644 --- a/drivers/char/selection.c +++ b/drivers/char/selection.c @@ -268,7 +268,7 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t /* Allocate a new buffer before freeing the old one ... */ multiplier = use_unicode ? 3 : 1; /* chars can take up to 3 bytes */ - bp = kmalloc((sel_end-sel_start)/2*multiplier+1, GFP_KERNEL); + bp = kmalloc(((sel_end-sel_start)/2+1)*multiplier, GFP_KERNEL); if (!bp) { printk(KERN_WARNING "selection: kmalloc() failed\n"); clear_selection(); diff --git a/drivers/char/sx.c b/drivers/char/sx.c index b60be7b0decf..f146e90404fa 100644 --- a/drivers/char/sx.c +++ b/drivers/char/sx.c @@ -1713,8 +1713,8 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd, for (i = 0; i < SX_NBOARDS; i++) sx_dprintk(SX_DEBUG_FIRMWARE, "<%x> ", boards[i].flags); sx_dprintk(SX_DEBUG_FIRMWARE, "\n"); - unlock_kernel(); - return -EIO; + rc = -EIO; + goto out; } switch (cmd) { @@ -1747,7 +1747,8 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd, break; case SXIO_DO_RAMTEST: if (sx_initialized) /* Already initialized: better not ramtest the board. */ - return -EPERM; + rc = -EPERM; + break; if (IS_SX_BOARD(board)) { rc = do_memtest(board, 0, 0x7000); if (!rc) @@ -1844,6 +1845,7 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd, rc = -ENOTTY; break; } +out: unlock_kernel(); func_exit(); return rc; diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c index 726ee8a0277f..ecba4942fc8e 100644 --- a/drivers/char/tpm/tpm_infineon.c +++ b/drivers/char/tpm/tpm_infineon.c @@ -4,7 +4,7 @@ * SLD 9630 TT 1.1 and SLB 9635 TT 1.2 Trusted Platform Module * Specifications at www.trustedcomputinggroup.org * - * Copyright (C) 2005, Marcel Selhorst <selhorst@crypto.rub.de> + * Copyright (C) 2005, Marcel Selhorst <m.selhorst@sirrix.com> * Sirrix AG - security technologies, http://www.sirrix.com and * Applied Data Security Group, Ruhr-University Bochum, Germany * Project-Homepage: http://www.prosec.rub.de/tpm @@ -636,7 +636,7 @@ static void __exit cleanup_inf(void) module_init(init_inf); module_exit(cleanup_inf); -MODULE_AUTHOR("Marcel Selhorst <selhorst@crypto.rub.de>"); +MODULE_AUTHOR("Marcel Selhorst <m.selhorst@sirrix.com>"); MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2"); MODULE_VERSION("1.9"); MODULE_LICENSE("GPL"); diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index d33e5ab06177..bc84e125c6bc 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -1817,8 +1817,10 @@ got_driver: /* check whether we're reopening an existing tty */ tty = tty_driver_lookup_tty(driver, inode, index); - if (IS_ERR(tty)) + if (IS_ERR(tty)) { + mutex_unlock(&tty_mutex); return PTR_ERR(tty); + } } if (tty) { diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c index e1129fad96dd..ee19b6e8fcb4 100644 --- a/drivers/clocksource/acpi_pm.c +++ b/drivers/clocksource/acpi_pm.c @@ -143,7 +143,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_LE, #endif #ifndef CONFIG_X86_64 -#include "mach_timer.h" +#include <asm/mach_timer.h> #define PMTMR_EXPECTED_RATE \ ((CALIBRATE_LATCH * (PMTMR_TICKS_PER_SEC >> 10)) / (CLOCK_TICK_RATE>>10)) /* diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c index 1bde303b970b..8615059a8729 100644 --- a/drivers/clocksource/cyclone.c +++ b/drivers/clocksource/cyclone.c @@ -7,7 +7,7 @@ #include <asm/pgtable.h> #include <asm/io.h> -#include "mach_timer.h" +#include <asm/mach_timer.h> #define CYCLONE_CBAR_ADDR 0xFEB00CD0 /* base address ptr */ #define CYCLONE_PMCC_OFFSET 0x51A0 /* offset to control register */ diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 6a2b036c9389..6f45b1658a67 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -117,11 +117,7 @@ static inline cputime64_t get_cpu_idle_time_jiffy(unsigned int cpu, busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.irq); busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.softirq); busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.steal); - - if (!dbs_tuners_ins.ignore_nice) { - busy_time = cputime64_add(busy_time, - kstat_cpu(cpu).cpustat.nice); - } + busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.nice); idle_time = cputime64_sub(cur_wall_time, busy_time); if (wall) @@ -137,23 +133,6 @@ static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall) if (idle_time == -1ULL) return get_cpu_idle_time_jiffy(cpu, wall); - if (dbs_tuners_ins.ignore_nice) { - cputime64_t cur_nice; - unsigned long cur_nice_jiffies; - struct cpu_dbs_info_s *dbs_info; - - dbs_info = &per_cpu(cpu_dbs_info, cpu); - cur_nice = cputime64_sub(kstat_cpu(cpu).cpustat.nice, - dbs_info->prev_cpu_nice); - /* - * Assumption: nice time between sampling periods will be - * less than 2^32 jiffies for 32 bit sys - */ - cur_nice_jiffies = (unsigned long) - cputime64_to_jiffies64(cur_nice); - dbs_info->prev_cpu_nice = kstat_cpu(cpu).cpustat.nice; - return idle_time + jiffies_to_usecs(cur_nice_jiffies); - } return idle_time; } @@ -319,6 +298,9 @@ static ssize_t store_ignore_nice_load(struct cpufreq_policy *policy, dbs_info = &per_cpu(cpu_dbs_info, j); dbs_info->prev_cpu_idle = get_cpu_idle_time(j, &dbs_info->prev_cpu_wall); + if (dbs_tuners_ins.ignore_nice) + dbs_info->prev_cpu_nice = kstat_cpu(j).cpustat.nice; + } mutex_unlock(&dbs_mutex); @@ -419,6 +401,23 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info) j_dbs_info->prev_cpu_idle); j_dbs_info->prev_cpu_idle = cur_idle_time; + if (dbs_tuners_ins.ignore_nice) { + cputime64_t cur_nice; + unsigned long cur_nice_jiffies; + + cur_nice = cputime64_sub(kstat_cpu(j).cpustat.nice, + j_dbs_info->prev_cpu_nice); + /* + * Assumption: nice time between sampling periods will + * be less than 2^32 jiffies for 32 bit sys + */ + cur_nice_jiffies = (unsigned long) + cputime64_to_jiffies64(cur_nice); + + j_dbs_info->prev_cpu_nice = kstat_cpu(j).cpustat.nice; + idle_time += jiffies_to_usecs(cur_nice_jiffies); + } + if (unlikely(!wall_time || wall_time < idle_time)) continue; @@ -575,6 +574,10 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, j_dbs_info->prev_cpu_idle = get_cpu_idle_time(j, &j_dbs_info->prev_cpu_wall); + if (dbs_tuners_ins.ignore_nice) { + j_dbs_info->prev_cpu_nice = + kstat_cpu(j).cpustat.nice; + } } this_dbs_info->cpu = cpu; /* diff --git a/drivers/dca/dca-core.c b/drivers/dca/dca-core.c index 55433849bfa6..33bd75347518 100644 --- a/drivers/dca/dca-core.c +++ b/drivers/dca/dca-core.c @@ -28,7 +28,7 @@ #include <linux/device.h> #include <linux/dca.h> -#define DCA_VERSION "1.4" +#define DCA_VERSION "1.8" MODULE_VERSION(DCA_VERSION); MODULE_LICENSE("GPL"); @@ -60,16 +60,17 @@ int dca_add_requester(struct device *dev) { struct dca_provider *dca; int err, slot = -ENODEV; + unsigned long flags; if (!dev) return -EFAULT; - spin_lock(&dca_lock); + spin_lock_irqsave(&dca_lock, flags); /* check if the requester has not been added already */ dca = dca_find_provider_by_dev(dev); if (dca) { - spin_unlock(&dca_lock); + spin_unlock_irqrestore(&dca_lock, flags); return -EEXIST; } @@ -78,19 +79,21 @@ int dca_add_requester(struct device *dev) if (slot >= 0) break; } - if (slot < 0) { - spin_unlock(&dca_lock); + + spin_unlock_irqrestore(&dca_lock, flags); + + if (slot < 0) return slot; - } err = dca_sysfs_add_req(dca, dev, slot); if (err) { - dca->ops->remove_requester(dca, dev); - spin_unlock(&dca_lock); + spin_lock_irqsave(&dca_lock, flags); + if (dca == dca_find_provider_by_dev(dev)) + dca->ops->remove_requester(dca, dev); + spin_unlock_irqrestore(&dca_lock, flags); return err; } - spin_unlock(&dca_lock); return 0; } EXPORT_SYMBOL_GPL(dca_add_requester); @@ -103,25 +106,25 @@ int dca_remove_requester(struct device *dev) { struct dca_provider *dca; int slot; + unsigned long flags; if (!dev) return -EFAULT; - spin_lock(&dca_lock); + spin_lock_irqsave(&dca_lock, flags); dca = dca_find_provider_by_dev(dev); if (!dca) { - spin_unlock(&dca_lock); + spin_unlock_irqrestore(&dca_lock, flags); return -ENODEV; } slot = dca->ops->remove_requester(dca, dev); - if (slot < 0) { - spin_unlock(&dca_lock); + spin_unlock_irqrestore(&dca_lock, flags); + + if (slot < 0) return slot; - } dca_sysfs_remove_req(dca, slot); - spin_unlock(&dca_lock); return 0; } EXPORT_SYMBOL_GPL(dca_remove_requester); @@ -135,17 +138,18 @@ u8 dca_common_get_tag(struct device *dev, int cpu) { struct dca_provider *dca; u8 tag; + unsigned long flags; - spin_lock(&dca_lock); + spin_lock_irqsave(&dca_lock, flags); dca = dca_find_provider_by_dev(dev); if (!dca) { - spin_unlock(&dca_lock); + spin_unlock_irqrestore(&dca_lock, flags); return -ENODEV; } tag = dca->ops->get_tag(dca, dev, cpu); - spin_unlock(&dca_lock); + spin_unlock_irqrestore(&dca_lock, flags); return tag; } @@ -217,11 +221,16 @@ static BLOCKING_NOTIFIER_HEAD(dca_provider_chain); int register_dca_provider(struct dca_provider *dca, struct device *dev) { int err; + unsigned long flags; err = dca_sysfs_add_provider(dca, dev); if (err) return err; + + spin_lock_irqsave(&dca_lock, flags); list_add(&dca->node, &dca_providers); + spin_unlock_irqrestore(&dca_lock, flags); + blocking_notifier_call_chain(&dca_provider_chain, DCA_PROVIDER_ADD, NULL); return 0; @@ -234,9 +243,15 @@ EXPORT_SYMBOL_GPL(register_dca_provider); */ void unregister_dca_provider(struct dca_provider *dca) { + unsigned long flags; + blocking_notifier_call_chain(&dca_provider_chain, DCA_PROVIDER_REMOVE, NULL); + + spin_lock_irqsave(&dca_lock, flags); list_del(&dca->node); + spin_unlock_irqrestore(&dca_lock, flags); + dca_sysfs_remove_provider(dca); } EXPORT_SYMBOL_GPL(unregister_dca_provider); diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c index cd2e3b8087e7..24f3ca851523 100644 --- a/drivers/edac/cell_edac.c +++ b/drivers/edac/cell_edac.c @@ -36,7 +36,7 @@ static void cell_edac_count_ce(struct mem_ctl_info *mci, int chan, u64 ar) struct csrow_info *csrow = &mci->csrows[0]; unsigned long address, pfn, offset, syndrome; - dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016lx\n", + dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016llx\n", priv->node, chan, ar); /* Address decoding is likely a bit bogus, to dbl check */ @@ -58,7 +58,7 @@ static void cell_edac_count_ue(struct mem_ctl_info *mci, int chan, u64 ar) struct csrow_info *csrow = &mci->csrows[0]; unsigned long address, pfn, offset; - dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016lx\n", + dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016llx\n", priv->node, chan, ar); /* Address decoding is likely a bit bogus, to dbl check */ @@ -169,7 +169,7 @@ static int __devinit cell_edac_probe(struct platform_device *pdev) /* Get channel population */ reg = in_be64(®s->mic_mnt_cfg); - dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016lx\n", reg); + dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016llx\n", reg); chanmask = 0; if (reg & CBE_MIC_MNT_CFG_CHAN_0_POP) chanmask |= 0x1; @@ -180,7 +180,7 @@ static int __devinit cell_edac_probe(struct platform_device *pdev) "Yuck ! No channel populated ? Aborting !\n"); return -ENODEV; } - dev_dbg(&pdev->dev, "Initial FIR = 0x%016lx\n", + dev_dbg(&pdev->dev, "Initial FIR = 0x%016llx\n", in_be64(®s->mic_fir)); /* Allocate & init EDAC MC data structure */ diff --git a/drivers/eisa/Kconfig b/drivers/eisa/Kconfig index c0646576cf47..2705284f6223 100644 --- a/drivers/eisa/Kconfig +++ b/drivers/eisa/Kconfig @@ -3,7 +3,7 @@ # config EISA_VLB_PRIMING bool "Vesa Local Bus priming" - depends on X86_PC && EISA + depends on X86 && EISA default n ---help--- Activate this option if your system contains a Vesa Local @@ -24,11 +24,11 @@ config EISA_PCI_EISA When in doubt, say Y. # Using EISA_VIRTUAL_ROOT on something other than an Alpha or -# an X86_PC may lead to crashes... +# an X86 may lead to crashes... config EISA_VIRTUAL_ROOT bool "EISA virtual root device" - depends on EISA && (ALPHA || X86_PC) + depends on EISA && (ALPHA || X86) default y ---help--- Activate this option if your system only have EISA bus diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c index 6bd91a15d5e6..a5dd7a665aa8 100644 --- a/drivers/firewire/fw-card.c +++ b/drivers/firewire/fw-card.c @@ -232,7 +232,7 @@ fw_card_bm_work(struct work_struct *work) root_id = root_node->node_id; grace = time_after(jiffies, card->reset_jiffies + DIV_ROUND_UP(HZ, 10)); - if (card->bm_generation + 1 == generation || + if (is_next_generation(generation, card->bm_generation) || (card->bm_generation != generation && grace)) { /* * This first step is to figure out who is IRM and @@ -412,6 +412,7 @@ fw_card_add(struct fw_card *card, { u32 *config_rom; size_t length; + int err; card->max_receive = max_receive; card->link_speed = link_speed; @@ -422,7 +423,13 @@ fw_card_add(struct fw_card *card, list_add_tail(&card->link, &card_list); mutex_unlock(&card_mutex); - return card->driver->enable(card, config_rom, length); + err = card->driver->enable(card, config_rom, length); + if (err < 0) { + mutex_lock(&card_mutex); + list_del(&card->link); + mutex_unlock(&card_mutex); + } + return err; } EXPORT_SYMBOL(fw_card_add); @@ -512,7 +519,7 @@ fw_core_remove_card(struct fw_card *card) fw_core_initiate_bus_reset(card, 1); mutex_lock(&card_mutex); - list_del(&card->link); + list_del_init(&card->link); mutex_unlock(&card_mutex); /* Set up the dummy driver. */ diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c index 2af5a8d1e012..bf53acb45652 100644 --- a/drivers/firewire/fw-device.c +++ b/drivers/firewire/fw-device.c @@ -25,6 +25,7 @@ #include <linux/device.h> #include <linux/delay.h> #include <linux/idr.h> +#include <linux/jiffies.h> #include <linux/string.h> #include <linux/rwsem.h> #include <linux/semaphore.h> @@ -634,12 +635,39 @@ struct fw_device *fw_device_get_by_devt(dev_t devt) return device; } +/* + * These defines control the retry behavior for reading the config + * rom. It shouldn't be necessary to tweak these; if the device + * doesn't respond to a config rom read within 10 seconds, it's not + * going to respond at all. As for the initial delay, a lot of + * devices will be able to respond within half a second after bus + * reset. On the other hand, it's not really worth being more + * aggressive than that, since it scales pretty well; if 10 devices + * are plugged in, they're all getting read within one second. + */ + +#define MAX_RETRIES 10 +#define RETRY_DELAY (3 * HZ) +#define INITIAL_DELAY (HZ / 2) +#define SHUTDOWN_DELAY (2 * HZ) + static void fw_device_shutdown(struct work_struct *work) { struct fw_device *device = container_of(work, struct fw_device, work.work); int minor = MINOR(device->device.devt); + if (time_is_after_jiffies(device->card->reset_jiffies + SHUTDOWN_DELAY) + && !list_empty(&device->card->link)) { + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); + return; + } + + if (atomic_cmpxchg(&device->state, + FW_DEVICE_GONE, + FW_DEVICE_SHUTDOWN) != FW_DEVICE_GONE) + return; + fw_device_cdev_remove(device); device_for_each_child(&device->device, NULL, shutdown_unit); device_unregister(&device->device); @@ -647,6 +675,7 @@ static void fw_device_shutdown(struct work_struct *work) down_write(&fw_device_rwsem); idr_remove(&fw_device_idr, minor); up_write(&fw_device_rwsem); + fw_device_put(device); } @@ -654,25 +683,63 @@ static struct device_type fw_device_type = { .release = fw_device_release, }; +static void fw_device_update(struct work_struct *work); + /* - * These defines control the retry behavior for reading the config - * rom. It shouldn't be necessary to tweak these; if the device - * doesn't respond to a config rom read within 10 seconds, it's not - * going to respond at all. As for the initial delay, a lot of - * devices will be able to respond within half a second after bus - * reset. On the other hand, it's not really worth being more - * aggressive than that, since it scales pretty well; if 10 devices - * are plugged in, they're all getting read within one second. + * If a device was pending for deletion because its node went away but its + * bus info block and root directory header matches that of a newly discovered + * device, revive the existing fw_device. + * The newly allocated fw_device becomes obsolete instead. */ +static int lookup_existing_device(struct device *dev, void *data) +{ + struct fw_device *old = fw_device(dev); + struct fw_device *new = data; + struct fw_card *card = new->card; + int match = 0; + + down_read(&fw_device_rwsem); /* serialize config_rom access */ + spin_lock_irq(&card->lock); /* serialize node access */ + + if (memcmp(old->config_rom, new->config_rom, 6 * 4) == 0 && + atomic_cmpxchg(&old->state, + FW_DEVICE_GONE, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) { + struct fw_node *current_node = new->node; + struct fw_node *obsolete_node = old->node; + + new->node = obsolete_node; + new->node->data = new; + old->node = current_node; + old->node->data = old; + + old->max_speed = new->max_speed; + old->node_id = current_node->node_id; + smp_wmb(); /* update node_id before generation */ + old->generation = card->generation; + old->config_rom_retries = 0; + fw_notify("rediscovered device %s\n", dev_name(dev)); -#define MAX_RETRIES 10 -#define RETRY_DELAY (3 * HZ) -#define INITIAL_DELAY (HZ / 2) + PREPARE_DELAYED_WORK(&old->work, fw_device_update); + schedule_delayed_work(&old->work, 0); + + if (current_node == card->root_node) + fw_schedule_bm_work(card, 0); + + match = 1; + } + + spin_unlock_irq(&card->lock); + up_read(&fw_device_rwsem); + + return match; +} static void fw_device_init(struct work_struct *work) { struct fw_device *device = container_of(work, struct fw_device, work.work); + struct device *revived_dev; int minor, err; /* @@ -696,6 +763,15 @@ static void fw_device_init(struct work_struct *work) return; } + revived_dev = device_find_child(device->card->device, + device, lookup_existing_device); + if (revived_dev) { + put_device(revived_dev); + fw_device_release(&device->device); + + return; + } + device_initialize(&device->device); fw_device_get(device); @@ -734,9 +810,10 @@ static void fw_device_init(struct work_struct *work) * fw_node_event(). */ if (atomic_cmpxchg(&device->state, - FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) { - fw_device_shutdown(work); + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) { + PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); } else { if (device->config_rom_retries) fw_notify("created device %s: GUID %08x%08x, S%d00, " @@ -847,8 +924,8 @@ static void fw_device_refresh(struct work_struct *work) case REREAD_BIB_UNCHANGED: if (atomic_cmpxchg(&device->state, - FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) goto gone; fw_device_update(work); @@ -879,8 +956,8 @@ static void fw_device_refresh(struct work_struct *work) create_units(device); if (atomic_cmpxchg(&device->state, - FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) goto gone; fw_notify("refreshed device %s\n", dev_name(&device->device)); @@ -890,8 +967,9 @@ static void fw_device_refresh(struct work_struct *work) give_up: fw_notify("giving up on refresh of device %s\n", dev_name(&device->device)); gone: - atomic_set(&device->state, FW_DEVICE_SHUTDOWN); - fw_device_shutdown(work); + atomic_set(&device->state, FW_DEVICE_GONE); + PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); out: if (node_id == card->root_node->node_id) fw_schedule_bm_work(card, 0); @@ -995,9 +1073,10 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event) */ device = node->data; if (atomic_xchg(&device->state, - FW_DEVICE_SHUTDOWN) == FW_DEVICE_RUNNING) { + FW_DEVICE_GONE) == FW_DEVICE_RUNNING) { PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); - schedule_delayed_work(&device->work, 0); + schedule_delayed_work(&device->work, + list_empty(&card->link) ? 0 : SHUTDOWN_DELAY); } break; } diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h index df51732608d9..8ef6ec2ca21c 100644 --- a/drivers/firewire/fw-device.h +++ b/drivers/firewire/fw-device.h @@ -28,6 +28,7 @@ enum fw_device_state { FW_DEVICE_INITIALIZING, FW_DEVICE_RUNNING, + FW_DEVICE_GONE, FW_DEVICE_SHUTDOWN, }; diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index ab9c01e462ef..6d19828a93a5 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -226,7 +226,7 @@ static inline struct fw_ohci *fw_ohci(struct fw_card *card) #define CONTEXT_DEAD 0x0800 #define CONTEXT_ACTIVE 0x0400 -#define OHCI1394_MAX_AT_REQ_RETRIES 0x2 +#define OHCI1394_MAX_AT_REQ_RETRIES 0xf #define OHCI1394_MAX_AT_RESP_RETRIES 0x2 #define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8 @@ -896,11 +896,11 @@ static void context_stop(struct context *ctx) for (i = 0; i < 10; i++) { reg = reg_read(ctx->ohci, CONTROL_SET(ctx->regs)); if ((reg & CONTEXT_ACTIVE) == 0) - break; + return; - fw_notify("context_stop: still active (0x%08x)\n", reg); mdelay(1); } + fw_error("Error: DMA context still active (0x%08x)\n", reg); } struct driver_data { diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index e88d5067448c..c71c4419d9e8 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -168,6 +168,7 @@ struct sbp2_target { int address_high; unsigned int workarounds; unsigned int mgt_orb_timeout; + unsigned int max_payload; int dont_block; /* counter for each logical unit */ int blocked; /* ditto */ @@ -310,14 +311,16 @@ struct sbp2_command_orb { dma_addr_t page_table_bus; }; +#define SBP2_ROM_VALUE_WILDCARD ~0 /* match all */ +#define SBP2_ROM_VALUE_MISSING 0xff000000 /* not present in the unit dir. */ + /* * List of devices with known bugs. * * The firmware_revision field, masked with 0xffff00, is the best * indicator for the type of bridge chip of a device. It yields a few * false positives but this did not break correctly behaving devices - * so far. We use ~0 as a wildcard, since the 24 bit values we get - * from the config rom can never match that. + * so far. */ static const struct { u32 firmware_revision; @@ -339,33 +342,35 @@ static const struct { }, /* Initio bridges, actually only needed for some older ones */ { .firmware_revision = 0x000200, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_INQUIRY_36, }, /* PL-3507 bridge with Prolific firmware */ { .firmware_revision = 0x012800, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_POWER_CONDITION, }, /* Symbios bridge */ { .firmware_revision = 0xa0b800, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ { .firmware_revision = 0x002600, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, - /* - * There are iPods (2nd gen, 3rd gen) with model_id == 0, but - * these iPods do not feature the read_capacity bug according - * to one report. Read_capacity behaviour as well as model_id - * could change due to Apple-supplied firmware updates though. + * iPod 2nd generation: needs 128k max transfer size workaround + * iPod 3rd generation: needs fix capacity workaround */ - - /* iPod 4th generation. */ { + { + .firmware_revision = 0x0a2700, + .model = 0x000000, + .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS | + SBP2_WORKAROUND_FIX_CAPACITY, + }, + /* iPod 4th generation */ { .firmware_revision = 0x0a2700, .model = 0x000021, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, @@ -1092,7 +1097,7 @@ static void sbp2_init_workarounds(struct sbp2_target *tgt, u32 model, continue; if (sbp2_workarounds_table[i].model != model && - sbp2_workarounds_table[i].model != ~0) + sbp2_workarounds_table[i].model != SBP2_ROM_VALUE_WILDCARD) continue; w |= sbp2_workarounds_table[i].workarounds; @@ -1142,20 +1147,28 @@ static int sbp2_probe(struct device *dev) fw_device_get(device); fw_unit_get(unit); - /* Initialize to values that won't match anything in our table. */ - firmware_revision = 0xff000000; - model = 0xff000000; - /* implicit directory ID */ tgt->directory_id = ((unit->directory - device->config_rom) * 4 + CSR_CONFIG_ROM) & 0xffffff; + firmware_revision = SBP2_ROM_VALUE_MISSING; + model = SBP2_ROM_VALUE_MISSING; + if (sbp2_scan_unit_dir(tgt, unit->directory, &model, &firmware_revision) < 0) goto fail_tgt_put; sbp2_init_workarounds(tgt, model, firmware_revision); + /* + * At S100 we can do 512 bytes per packet, at S200 1024 bytes, + * and so on up to 4096 bytes. The SBP-2 max_payload field + * specifies the max payload size as 2 ^ (max_payload + 2), so + * if we set this to max_speed + 7, we get the right value. + */ + tgt->max_payload = min(device->max_speed + 7, 10U); + tgt->max_payload = min(tgt->max_payload, device->card->max_receive - 1); + /* Do the login in a workqueue so we can easily reschedule retries. */ list_for_each_entry(lu, &tgt->lu_list, link) sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5)); @@ -1273,6 +1286,19 @@ static struct fw_driver sbp2_driver = { .id_table = sbp2_id_table, }; +static void sbp2_unmap_scatterlist(struct device *card_device, + struct sbp2_command_orb *orb) +{ + if (scsi_sg_count(orb->cmd)) + dma_unmap_sg(card_device, scsi_sglist(orb->cmd), + scsi_sg_count(orb->cmd), + orb->cmd->sc_data_direction); + + if (orb->request.misc & cpu_to_be32(COMMAND_ORB_PAGE_TABLE_PRESENT)) + dma_unmap_single(card_device, orb->page_table_bus, + sizeof(orb->page_table), DMA_TO_DEVICE); +} + static unsigned int sbp2_status_to_sense_data(u8 *sbp2_status, u8 *sense_data) { @@ -1352,15 +1378,7 @@ complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status) dma_unmap_single(device->card->device, orb->base.request_bus, sizeof(orb->request), DMA_TO_DEVICE); - - if (scsi_sg_count(orb->cmd) > 0) - dma_unmap_sg(device->card->device, scsi_sglist(orb->cmd), - scsi_sg_count(orb->cmd), - orb->cmd->sc_data_direction); - - if (orb->page_table_bus != 0) - dma_unmap_single(device->card->device, orb->page_table_bus, - sizeof(orb->page_table), DMA_TO_DEVICE); + sbp2_unmap_scatterlist(device->card->device, orb); orb->cmd->result = result; orb->done(orb->cmd); @@ -1434,7 +1452,6 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) struct sbp2_logical_unit *lu = cmd->device->hostdata; struct fw_device *device = fw_device(lu->tgt->unit->device.parent); struct sbp2_command_orb *orb; - unsigned int max_payload; int generation, retval = SCSI_MLQUEUE_HOST_BUSY; /* @@ -1462,17 +1479,9 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) orb->done = done; orb->cmd = cmd; - orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL); - /* - * At speed 100 we can do 512 bytes per packet, at speed 200, - * 1024 bytes per packet etc. The SBP-2 max_payload field - * specifies the max payload size as 2 ^ (max_payload + 2), so - * if we set this to max_speed + 7, we get the right value. - */ - max_payload = min(device->max_speed + 7, - device->card->max_receive - 1); + orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL); orb->request.misc = cpu_to_be32( - COMMAND_ORB_MAX_PAYLOAD(max_payload) | + COMMAND_ORB_MAX_PAYLOAD(lu->tgt->max_payload) | COMMAND_ORB_SPEED(device->max_speed) | COMMAND_ORB_NOTIFY); @@ -1491,8 +1500,10 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) orb->base.request_bus = dma_map_single(device->card->device, &orb->request, sizeof(orb->request), DMA_TO_DEVICE); - if (dma_mapping_error(device->card->device, orb->base.request_bus)) + if (dma_mapping_error(device->card->device, orb->base.request_bus)) { + sbp2_unmap_scatterlist(device->card->device, orb); goto out; + } sbp2_send_orb(&orb->base, lu, lu->tgt->node_id, generation, lu->command_block_agent_address + SBP2_ORB_POINTER); diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c index c9be6e6948c4..8dd6703b55cd 100644 --- a/drivers/firewire/fw-topology.c +++ b/drivers/firewire/fw-topology.c @@ -518,6 +518,18 @@ fw_core_handle_bus_reset(struct fw_card *card, struct fw_node *local_node; unsigned long flags; + /* + * If the selfID buffer is not the immediate successor of the + * previously processed one, we cannot reliably compare the + * old and new topologies. + */ + if (!is_next_generation(generation, card->generation) && + card->local_node != NULL) { + fw_notify("skipped bus generations, destroying all nodes\n"); + fw_destroy_nodes(card); + card->bm_retries = 0; + } + spin_lock_irqsave(&card->lock, flags); card->node_id = node_id; diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index c9ab12a15f6e..1d78e9cc5940 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h @@ -276,6 +276,15 @@ static inline void fw_card_put(struct fw_card *card) extern void fw_schedule_bm_work(struct fw_card *card, unsigned long delay); /* + * Check whether new_generation is the immediate successor of old_generation. + * Take counter roll-over at 255 (as per to OHCI) into account. + */ +static inline bool is_next_generation(int new_generation, int old_generation) +{ + return (new_generation & 0xff) == ((old_generation + 1) & 0xff); +} + +/* * The iso packet format allows for an immediate header/payload part * stored in 'header' immediately after the packet info plus an * indirect payload part that is pointer to by the 'payload' field. diff --git a/drivers/firmware/dcdbas.c b/drivers/firmware/dcdbas.c index 777fba48d2d3..3009e0171e54 100644 --- a/drivers/firmware/dcdbas.c +++ b/drivers/firmware/dcdbas.c @@ -244,7 +244,7 @@ static ssize_t host_control_on_shutdown_store(struct device *dev, */ int dcdbas_smi_request(struct smi_cmd *smi_cmd) { - cpumask_t old_mask; + cpumask_var_t old_mask; int ret = 0; if (smi_cmd->magic != SMI_CMD_MAGIC) { @@ -254,8 +254,11 @@ int dcdbas_smi_request(struct smi_cmd *smi_cmd) } /* SMI requires CPU 0 */ - old_mask = current->cpus_allowed; - set_cpus_allowed_ptr(current, &cpumask_of_cpu(0)); + if (!alloc_cpumask_var(&old_mask, GFP_KERNEL)) + return -ENOMEM; + + cpumask_copy(old_mask, ¤t->cpus_allowed); + set_cpus_allowed_ptr(current, cpumask_of(0)); if (smp_processor_id() != 0) { dev_dbg(&dcdbas_pdev->dev, "%s: failed to get CPU 0\n", __func__); @@ -275,7 +278,8 @@ int dcdbas_smi_request(struct smi_cmd *smi_cmd) ); out: - set_cpus_allowed_ptr(current, &old_mask); + set_cpus_allowed_ptr(current, old_mask); + free_cpumask_var(old_mask); return ret; } diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index d76adfea5df7..8f0f7c449305 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -415,6 +415,29 @@ void __init dmi_scan_machine(void) } /** + * dmi_matches - check if dmi_system_id structure matches system DMI data + * @dmi: pointer to the dmi_system_id structure to check + */ +static bool dmi_matches(const struct dmi_system_id *dmi) +{ + int i; + + WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n"); + + for (i = 0; i < ARRAY_SIZE(dmi->matches); i++) { + int s = dmi->matches[i].slot; + if (s == DMI_NONE) + continue; + if (dmi_ident[s] + && strstr(dmi_ident[s], dmi->matches[i].substr)) + continue; + /* No match */ + return false; + } + return true; +} + +/** * dmi_check_system - check system DMI data * @list: array of dmi_system_id structures to match against * All non-null elements of the list must match @@ -429,32 +452,45 @@ void __init dmi_scan_machine(void) */ int dmi_check_system(const struct dmi_system_id *list) { - int i, count = 0; - const struct dmi_system_id *d = list; - - WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n"); - - while (d->ident) { - for (i = 0; i < ARRAY_SIZE(d->matches); i++) { - int s = d->matches[i].slot; - if (s == DMI_NONE) - continue; - if (dmi_ident[s] && strstr(dmi_ident[s], d->matches[i].substr)) - continue; - /* No match */ - goto fail; + int count = 0; + const struct dmi_system_id *d; + + for (d = list; d->ident; d++) + if (dmi_matches(d)) { + count++; + if (d->callback && d->callback(d)) + break; } - count++; - if (d->callback && d->callback(d)) - break; -fail: d++; - } return count; } EXPORT_SYMBOL(dmi_check_system); /** + * dmi_first_match - find dmi_system_id structure matching system DMI data + * @list: array of dmi_system_id structures to match against + * All non-null elements of the list must match + * their slot's (field index's) data (i.e., each + * list string must be a substring of the specified + * DMI slot's string data) to be considered a + * successful match. + * + * Walk the blacklist table until the first match is found. Return the + * pointer to the matching entry or NULL if there's no match. + */ +const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list) +{ + const struct dmi_system_id *d; + + for (d = list; d->ident; d++) + if (dmi_matches(d)) + return d; + + return NULL; +} +EXPORT_SYMBOL(dmi_first_match); + +/** * dmi_get_system_info - return DMI data value * @field: data index (see enum dmi_field) * diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c index 3ab3e4a41d67..7b7ddc2d51c9 100644 --- a/drivers/firmware/iscsi_ibft.c +++ b/drivers/firmware/iscsi_ibft.c @@ -938,8 +938,8 @@ static int __init ibft_init(void) return -ENOMEM; if (ibft_addr) { - printk(KERN_INFO "iBFT detected at 0x%lx.\n", - virt_to_phys((void *)ibft_addr)); + printk(KERN_INFO "iBFT detected at 0x%llx.\n", + (u64)virt_to_phys((void *)ibft_addr)); rc = ibft_check_device(); if (rc) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 35e7aea4222c..42fb2fd24c0c 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -789,6 +789,7 @@ int gpio_request(unsigned gpio, const char *label) } else { status = -EBUSY; module_put(chip->owner); + goto done; } if (chip->request) { diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 5130b72d593c..4be3acbaaf9a 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -70,7 +70,7 @@ config DRM_I915 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - depends on FB + select FB tristate "i915 driver" help Choose this option if you have a system that has Intel 830M, 845G, diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 9da581452874..6915fb82d0b0 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -136,7 +136,7 @@ drm_gem_object_alloc(struct drm_device *dev, size_t size) obj = kcalloc(1, sizeof(*obj), GFP_KERNEL); obj->dev = dev; - obj->filp = shmem_file_setup("drm mm object", size, 0); + obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE); if (IS_ERR(obj->filp)) { kfree(obj); return NULL; diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 477caa1b1e4b..3795dbc0f50c 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -106,8 +106,6 @@ void drm_vblank_cleanup(struct drm_device *dev) drm_free(dev->vbl_queue, sizeof(*dev->vbl_queue) * dev->num_crtcs, DRM_MEM_DRIVER); - drm_free(dev->vbl_sigs, sizeof(*dev->vbl_sigs) * dev->num_crtcs, - DRM_MEM_DRIVER); drm_free(dev->_vblank_count, sizeof(*dev->_vblank_count) * dev->num_crtcs, DRM_MEM_DRIVER); drm_free(dev->vblank_refcount, sizeof(*dev->vblank_refcount) * @@ -132,7 +130,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs) setup_timer(&dev->vblank_disable_timer, vblank_disable_fn, (unsigned long)dev); spin_lock_init(&dev->vbl_lock); - atomic_set(&dev->vbl_signal_pending, 0); dev->num_crtcs = num_crtcs; dev->vbl_queue = drm_alloc(sizeof(wait_queue_head_t) * num_crtcs, @@ -140,11 +137,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs) if (!dev->vbl_queue) goto err; - dev->vbl_sigs = drm_alloc(sizeof(struct list_head) * num_crtcs, - DRM_MEM_DRIVER); - if (!dev->vbl_sigs) - goto err; - dev->_vblank_count = drm_alloc(sizeof(atomic_t) * num_crtcs, DRM_MEM_DRIVER); if (!dev->_vblank_count) @@ -177,7 +169,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs) /* Zero per-crtc vblank stuff */ for (i = 0; i < num_crtcs; i++) { init_waitqueue_head(&dev->vbl_queue[i]); - INIT_LIST_HEAD(&dev->vbl_sigs[i]); atomic_set(&dev->_vblank_count[i], 0); atomic_set(&dev->vblank_refcount[i], 0); } @@ -285,6 +276,7 @@ int drm_irq_uninstall(struct drm_device * dev) for (i = 0; i < dev->num_crtcs; i++) { DRM_WAKEUP(&dev->vbl_queue[i]); dev->vblank_enabled[i] = 0; + dev->last_vblank[i] = dev->driver->get_vblank_counter(dev, i); } spin_unlock_irqrestore(&dev->vbl_lock, irqflags); @@ -540,15 +532,10 @@ out: * \param data user argument, pointing to a drm_wait_vblank structure. * \return zero on success or a negative number on failure. * - * Verifies the IRQ is installed. - * - * If a signal is requested checks if this task has already scheduled the same signal - * for the same vblank sequence number - nothing to be done in - * that case. If the number of tasks waiting for the interrupt exceeds 100 the - * function fails. Otherwise adds a new entry to drm_device::vbl_sigs for this - * task. - * - * If a signal is not requested, then calls vblank_wait(). + * This function enables the vblank interrupt on the pipe requested, then + * sleeps waiting for the requested sequence number to occur, and drops + * the vblank interrupt refcount afterwards. (vblank irq disable follows that + * after a timeout with no further vblank waits scheduled). */ int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -560,6 +547,9 @@ int drm_wait_vblank(struct drm_device *dev, void *data, if ((!dev->pdev->irq) || (!dev->irq_enabled)) return -EINVAL; + if (vblwait->request.type & _DRM_VBLANK_SIGNAL) + return -EINVAL; + if (vblwait->request.type & ~(_DRM_VBLANK_TYPES_MASK | _DRM_VBLANK_FLAGS_MASK)) { DRM_ERROR("Unsupported type value 0x%x, supported mask 0x%x\n", @@ -597,89 +587,26 @@ int drm_wait_vblank(struct drm_device *dev, void *data, vblwait->request.sequence = seq + 1; } - if (flags & _DRM_VBLANK_SIGNAL) { - unsigned long irqflags; - struct list_head *vbl_sigs = &dev->vbl_sigs[crtc]; - struct drm_vbl_sig *vbl_sig; - - spin_lock_irqsave(&dev->vbl_lock, irqflags); - - /* Check if this task has already scheduled the same signal - * for the same vblank sequence number; nothing to be done in - * that case - */ - list_for_each_entry(vbl_sig, vbl_sigs, head) { - if (vbl_sig->sequence == vblwait->request.sequence - && vbl_sig->info.si_signo == - vblwait->request.signal - && vbl_sig->task == current) { - spin_unlock_irqrestore(&dev->vbl_lock, - irqflags); - vblwait->reply.sequence = seq; - goto done; - } - } - - if (atomic_read(&dev->vbl_signal_pending) >= 100) { - spin_unlock_irqrestore(&dev->vbl_lock, irqflags); - ret = -EBUSY; - goto done; - } - - spin_unlock_irqrestore(&dev->vbl_lock, irqflags); - - vbl_sig = drm_calloc(1, sizeof(struct drm_vbl_sig), - DRM_MEM_DRIVER); - if (!vbl_sig) { - ret = -ENOMEM; - goto done; - } - - /* Get a refcount on the vblank, which will be released by - * drm_vbl_send_signals(). - */ - ret = drm_vblank_get(dev, crtc); - if (ret) { - drm_free(vbl_sig, sizeof(struct drm_vbl_sig), - DRM_MEM_DRIVER); - goto done; - } - - atomic_inc(&dev->vbl_signal_pending); - - vbl_sig->sequence = vblwait->request.sequence; - vbl_sig->info.si_signo = vblwait->request.signal; - vbl_sig->task = current; + DRM_DEBUG("waiting on vblank count %d, crtc %d\n", + vblwait->request.sequence, crtc); + dev->last_vblank_wait[crtc] = vblwait->request.sequence; + DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ, + (((drm_vblank_count(dev, crtc) - + vblwait->request.sequence) <= (1 << 23)) || + !dev->irq_enabled)); - spin_lock_irqsave(&dev->vbl_lock, irqflags); - - list_add_tail(&vbl_sig->head, vbl_sigs); + if (ret != -EINTR) { + struct timeval now; - spin_unlock_irqrestore(&dev->vbl_lock, irqflags); + do_gettimeofday(&now); - vblwait->reply.sequence = seq; + vblwait->reply.tval_sec = now.tv_sec; + vblwait->reply.tval_usec = now.tv_usec; + vblwait->reply.sequence = drm_vblank_count(dev, crtc); + DRM_DEBUG("returning %d to client\n", + vblwait->reply.sequence); } else { - DRM_DEBUG("waiting on vblank count %d, crtc %d\n", - vblwait->request.sequence, crtc); - dev->last_vblank_wait[crtc] = vblwait->request.sequence; - DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ, - (((drm_vblank_count(dev, crtc) - - vblwait->request.sequence) <= (1 << 23)) || - !dev->irq_enabled)); - - if (ret != -EINTR) { - struct timeval now; - - do_gettimeofday(&now); - - vblwait->reply.tval_sec = now.tv_sec; - vblwait->reply.tval_usec = now.tv_usec; - vblwait->reply.sequence = drm_vblank_count(dev, crtc); - DRM_DEBUG("returning %d to client\n", - vblwait->reply.sequence); - } else { - DRM_DEBUG("vblank wait interrupted by signal\n"); - } + DRM_DEBUG("vblank wait interrupted by signal\n"); } done: @@ -688,46 +615,6 @@ done: } /** - * Send the VBLANK signals. - * - * \param dev DRM device. - * \param crtc CRTC where the vblank event occurred - * - * Sends a signal for each task in drm_device::vbl_sigs and empties the list. - * - * If a signal is not requested, then calls vblank_wait(). - */ -static void drm_vbl_send_signals(struct drm_device *dev, int crtc) -{ - struct drm_vbl_sig *vbl_sig, *tmp; - struct list_head *vbl_sigs; - unsigned int vbl_seq; - unsigned long flags; - - spin_lock_irqsave(&dev->vbl_lock, flags); - - vbl_sigs = &dev->vbl_sigs[crtc]; - vbl_seq = drm_vblank_count(dev, crtc); - - list_for_each_entry_safe(vbl_sig, tmp, vbl_sigs, head) { - if ((vbl_seq - vbl_sig->sequence) <= (1 << 23)) { - vbl_sig->info.si_code = vbl_seq; - send_sig_info(vbl_sig->info.si_signo, - &vbl_sig->info, vbl_sig->task); - - list_del(&vbl_sig->head); - - drm_free(vbl_sig, sizeof(*vbl_sig), - DRM_MEM_DRIVER); - atomic_dec(&dev->vbl_signal_pending); - drm_vblank_put(dev, crtc); - } - } - - spin_unlock_irqrestore(&dev->vbl_lock, flags); -} - -/** * drm_handle_vblank - handle a vblank event * @dev: DRM device * @crtc: where this event occurred @@ -739,6 +626,5 @@ void drm_handle_vblank(struct drm_device *dev, int crtc) { atomic_inc(&dev->_vblank_count[crtc]); DRM_WAKEUP(&dev->vbl_queue[crtc]); - drm_vbl_send_signals(dev, crtc); } EXPORT_SYMBOL(drm_handle_vblank); diff --git a/drivers/gpu/drm/drm_memory.c b/drivers/gpu/drm/drm_memory.c index 803bc9e7ce3c..bcc869bc4092 100644 --- a/drivers/gpu/drm/drm_memory.c +++ b/drivers/gpu/drm/drm_memory.c @@ -171,9 +171,14 @@ EXPORT_SYMBOL(drm_core_ioremap); void drm_core_ioremap_wc(struct drm_map *map, struct drm_device *dev) { - map->handle = ioremap_wc(map->offset, map->size); + if (drm_core_has_AGP(dev) && + dev->agp && dev->agp->cant_use_aperture && map->type == _DRM_AGP) + map->handle = agp_remap(map->offset, map->size, dev); + else + map->handle = ioremap_wc(map->offset, map->size); } EXPORT_SYMBOL(drm_core_ioremap_wc); + void drm_core_ioremapfree(struct drm_map *map, struct drm_device *dev) { if (!map->handle || !map->size) diff --git a/drivers/gpu/drm/drm_proc.c b/drivers/gpu/drm/drm_proc.c index 8df849f66830..b756f043a5f4 100644 --- a/drivers/gpu/drm/drm_proc.c +++ b/drivers/gpu/drm/drm_proc.c @@ -678,9 +678,9 @@ static int drm__vma_info(char *buf, char **start, off_t offset, int request, *start = &buf[offset]; *eof = 0; - DRM_PROC_PRINT("vma use count: %d, high_memory = %p, 0x%08lx\n", + DRM_PROC_PRINT("vma use count: %d, high_memory = %p, 0x%llx\n", atomic_read(&dev->vma_count), - high_memory, virt_to_phys(high_memory)); + high_memory, (u64)virt_to_phys(high_memory)); list_for_each_entry(pt, &dev->vmalist, head) { if (!(vma = pt->vma)) continue; diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index ee64b7301f67..81f1cff56fd5 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -731,8 +731,11 @@ static int i915_getparam(struct drm_device *dev, void *data, case I915_PARAM_HAS_GEM: value = dev_priv->has_gem; break; + case I915_PARAM_NUM_FENCES_AVAIL: + value = dev_priv->num_fence_regs - dev_priv->fence_reg_start; + break; default: - DRM_ERROR("Unknown parameter %d\n", param->param); + DRM_DEBUG("Unknown parameter %d\n", param->param); return -EINVAL; } @@ -764,8 +767,15 @@ static int i915_setparam(struct drm_device *dev, void *data, case I915_SETPARAM_ALLOW_BATCHBUFFER: dev_priv->allow_batchbuffer = param->value; break; + case I915_SETPARAM_NUM_USED_FENCES: + if (param->value > dev_priv->num_fence_regs || + param->value < 0) + return -EINVAL; + /* Userspace can use first N regs */ + dev_priv->fence_reg_start = param->value; + break; default: - DRM_ERROR("unknown parameter %d\n", param->param); + DRM_DEBUG("unknown parameter %d\n", param->param); return -EINVAL; } @@ -966,10 +976,6 @@ static int i915_load_modeset_init(struct drm_device *dev) if (ret) goto kfree_devname; - dev_priv->mm.gtt_mapping = - io_mapping_create_wc(dev->agp->base, - dev->agp->agp_info.aper_size * 1024*1024); - /* Allow hardware batchbuffers unless told otherwise. */ dev_priv->allow_batchbuffer = 1; @@ -1081,6 +1087,23 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) goto free_priv; } + dev_priv->mm.gtt_mapping = + io_mapping_create_wc(dev->agp->base, + dev->agp->agp_info.aper_size * 1024*1024); + /* Set up a WC MTRR for non-PAT systems. This is more common than + * one would think, because the kernel disables PAT on first + * generation Core chips because WC PAT gets overridden by a UC + * MTRR if present. Even if a UC MTRR isn't present. + */ + dev_priv->mm.gtt_mtrr = mtrr_add(dev->agp->base, + dev->agp->agp_info.aper_size * + 1024 * 1024, + MTRR_TYPE_WRCOMB, 1); + if (dev_priv->mm.gtt_mtrr < 0) { + DRM_INFO("MTRR allocation failed\n. Graphics " + "performance may suffer.\n"); + } + #ifdef CONFIG_HIGHMEM64G /* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */ dev_priv->has_gem = 0; @@ -1089,6 +1112,10 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) dev_priv->has_gem = 1; #endif + dev->driver->get_vblank_counter = i915_get_vblank_counter; + if (IS_GM45(dev)) + dev->driver->get_vblank_counter = gm45_get_vblank_counter; + i915_gem_load(dev); /* Init HWS */ @@ -1145,8 +1172,14 @@ int i915_driver_unload(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; + io_mapping_free(dev_priv->mm.gtt_mapping); + if (dev_priv->mm.gtt_mtrr >= 0) { + mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base, + dev->agp->agp_info.aper_size * 1024 * 1024); + dev_priv->mm.gtt_mtrr = -1; + } + if (drm_core_check_feature(dev, DRIVER_MODESET)) { - io_mapping_free(dev_priv->mm.gtt_mapping); drm_irq_uninstall(dev); } diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index f8b3df0926c0..aac12ee31a46 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -112,7 +112,6 @@ static struct drm_driver driver = { .suspend = i915_suspend, .resume = i915_resume, .device_is_agp = i915_driver_device_is_agp, - .get_vblank_counter = i915_get_vblank_counter, .enable_vblank = i915_enable_vblank, .disable_vblank = i915_disable_vblank, .irq_preinstall = i915_driver_irq_preinstall, diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index e13518252007..7325363164f8 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -284,6 +284,7 @@ typedef struct drm_i915_private { struct drm_mm gtt_space; struct io_mapping *gtt_mapping; + int gtt_mtrr; /** * List of objects currently involved in rendering from the @@ -534,6 +535,7 @@ extern int i915_vblank_pipe_get(struct drm_device *dev, void *data, extern int i915_enable_vblank(struct drm_device *dev, int crtc); extern void i915_disable_vblank(struct drm_device *dev, int crtc); extern u32 i915_get_vblank_counter(struct drm_device *dev, int crtc); +extern u32 gm45_get_vblank_counter(struct drm_device *dev, int crtc); extern int i915_vblank_swap(struct drm_device *dev, void *data, struct drm_file *file_priv); extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask); @@ -601,6 +603,7 @@ int i915_gem_init_object(struct drm_gem_object *obj); void i915_gem_free_object(struct drm_gem_object *obj); int i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment); void i915_gem_object_unpin(struct drm_gem_object *obj); +int i915_gem_object_unbind(struct drm_gem_object *obj); void i915_gem_lastclose(struct drm_device *dev); uint32_t i915_get_gem_seqno(struct drm_device *dev); void i915_gem_retire_requests(struct drm_device *dev); @@ -784,6 +787,11 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); IS_I945GM(dev) || IS_I965GM(dev) || IS_GM45(dev)) #define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev)) +/* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte + * rows, which changed the alignment requirements and fence programming. + */ +#define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \ + IS_I915GM(dev))) #define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index debad5c04cc0..818576654092 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -52,7 +52,7 @@ static void i915_gem_object_free_page_list(struct drm_gem_object *obj); static int i915_gem_object_wait_rendering(struct drm_gem_object *obj); static int i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment); -static void i915_gem_object_get_fence_reg(struct drm_gem_object *obj); +static int i915_gem_object_get_fence_reg(struct drm_gem_object *obj, bool write); static void i915_gem_clear_fence_reg(struct drm_gem_object *obj); static int i915_gem_evict_something(struct drm_device *dev); static int i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj, @@ -567,6 +567,7 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) pgoff_t page_offset; unsigned long pfn; int ret = 0; + bool write = !!(vmf->flags & FAULT_FLAG_WRITE); /* We don't use vmf->pgoff since that has the fake offset */ page_offset = ((unsigned long)vmf->virtual_address - vma->vm_start) >> @@ -585,8 +586,13 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) /* Need a new fence register? */ if (obj_priv->fence_reg == I915_FENCE_REG_NONE && - obj_priv->tiling_mode != I915_TILING_NONE) - i915_gem_object_get_fence_reg(obj); + obj_priv->tiling_mode != I915_TILING_NONE) { + ret = i915_gem_object_get_fence_reg(obj, write); + if (ret) { + mutex_unlock(&dev->struct_mutex); + return VM_FAULT_SIGBUS; + } + } pfn = ((dev->agp->base + obj_priv->gtt_offset) >> PAGE_SHIFT) + page_offset; @@ -1211,7 +1217,7 @@ i915_gem_object_wait_rendering(struct drm_gem_object *obj) /** * Unbinds an object from the GTT aperture. */ -static int +int i915_gem_object_unbind(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; @@ -1445,21 +1451,26 @@ static void i915_write_fence_reg(struct drm_i915_fence_reg *reg) drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; int regnum = obj_priv->fence_reg; + int tile_width; uint32_t val; uint32_t pitch_val; if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) || (obj_priv->gtt_offset & (obj->size - 1))) { - WARN(1, "%s: object not 1M or size aligned\n", __func__); + WARN(1, "%s: object 0x%08x not 1M or size (0x%zx) aligned\n", + __func__, obj_priv->gtt_offset, obj->size); return; } - if (obj_priv->tiling_mode == I915_TILING_Y && (IS_I945G(dev) || - IS_I945GM(dev) || - IS_G33(dev))) - pitch_val = (obj_priv->stride / 128) - 1; + if (obj_priv->tiling_mode == I915_TILING_Y && + HAS_128_BYTE_Y_TILING(dev)) + tile_width = 128; else - pitch_val = (obj_priv->stride / 512) - 1; + tile_width = 512; + + /* Note: pitch better be a power of two tile widths */ + pitch_val = obj_priv->stride / tile_width; + pitch_val = ffs(pitch_val) - 1; val = obj_priv->gtt_offset; if (obj_priv->tiling_mode == I915_TILING_Y) @@ -1483,7 +1494,8 @@ static void i830_write_fence_reg(struct drm_i915_fence_reg *reg) if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) || (obj_priv->gtt_offset & (obj->size - 1))) { - WARN(1, "%s: object not 1M or size aligned\n", __func__); + WARN(1, "%s: object 0x%08x not 1M or size aligned\n", + __func__, obj_priv->gtt_offset); return; } @@ -1503,6 +1515,7 @@ static void i830_write_fence_reg(struct drm_i915_fence_reg *reg) /** * i915_gem_object_get_fence_reg - set up a fence reg for an object * @obj: object to map through a fence reg + * @write: object is about to be written * * When mapping objects through the GTT, userspace wants to be able to write * to them without having to worry about swizzling if the object is tiled. @@ -1513,8 +1526,8 @@ static void i830_write_fence_reg(struct drm_i915_fence_reg *reg) * It then sets up the reg based on the object's properties: address, pitch * and tiling format. */ -static void -i915_gem_object_get_fence_reg(struct drm_gem_object *obj) +static int +i915_gem_object_get_fence_reg(struct drm_gem_object *obj, bool write) { struct drm_device *dev = obj->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -1527,12 +1540,18 @@ i915_gem_object_get_fence_reg(struct drm_gem_object *obj) WARN(1, "allocating a fence for non-tiled object?\n"); break; case I915_TILING_X: - WARN(obj_priv->stride & (512 - 1), - "object is X tiled but has non-512B pitch\n"); + if (!obj_priv->stride) + return -EINVAL; + WARN((obj_priv->stride & (512 - 1)), + "object 0x%08x is X tiled but has non-512B pitch\n", + obj_priv->gtt_offset); break; case I915_TILING_Y: - WARN(obj_priv->stride & (128 - 1), - "object is Y tiled but has non-128B pitch\n"); + if (!obj_priv->stride) + return -EINVAL; + WARN((obj_priv->stride & (128 - 1)), + "object 0x%08x is Y tiled but has non-128B pitch\n", + obj_priv->gtt_offset); break; } @@ -1563,10 +1582,11 @@ try_again: * objects to finish before trying again. */ if (i == dev_priv->num_fence_regs) { - ret = i915_gem_object_wait_rendering(reg->obj); + ret = i915_gem_object_set_to_gtt_domain(reg->obj, 0); if (ret) { - WARN(ret, "wait_rendering failed: %d\n", ret); - return; + WARN(ret != -ERESTARTSYS, + "switch to GTT domain failed: %d\n", ret); + return ret; } goto try_again; } @@ -1591,6 +1611,8 @@ try_again: i915_write_fence_reg(reg); else i830_write_fence_reg(reg); + + return 0; } /** @@ -1631,7 +1653,7 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) if (dev_priv->mm.suspended) return -EBUSY; if (alignment == 0) - alignment = PAGE_SIZE; + alignment = i915_gem_get_gtt_alignment(obj); if (alignment & (PAGE_SIZE - 1)) { DRM_ERROR("Invalid object alignment requested %u\n", alignment); return -EINVAL; @@ -2652,6 +2674,14 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment) DRM_ERROR("Failure to bind: %d", ret); return ret; } + /* + * Pre-965 chips need a fence register set up in order to + * properly handle tiled surfaces. + */ + if (!IS_I965G(dev) && + obj_priv->fence_reg == I915_FENCE_REG_NONE && + obj_priv->tiling_mode != I915_TILING_NONE) + i915_gem_object_get_fence_reg(obj, true); } obj_priv->pin_count++; @@ -3229,10 +3259,6 @@ i915_gem_entervt_ioctl(struct drm_device *dev, void *data, dev_priv->mm.wedged = 0; } - dev_priv->mm.gtt_mapping = io_mapping_create_wc(dev->agp->base, - dev->agp->agp_info.aper_size - * 1024 * 1024); - mutex_lock(&dev->struct_mutex); dev_priv->mm.suspended = 0; @@ -3255,7 +3281,6 @@ int i915_gem_leavevt_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { - drm_i915_private_t *dev_priv = dev->dev_private; int ret; if (drm_core_check_feature(dev, DRIVER_MODESET)) @@ -3264,7 +3289,6 @@ i915_gem_leavevt_ioctl(struct drm_device *dev, void *data, ret = i915_gem_idle(dev); drm_irq_uninstall(dev); - io_mapping_free(dev_priv->mm.gtt_mapping); return ret; } @@ -3273,6 +3297,9 @@ i915_gem_lastclose(struct drm_device *dev) { int ret; + if (drm_core_check_feature(dev, DRIVER_MODESET)) + return; + ret = i915_gem_idle(dev); if (ret) DRM_ERROR("failed to idle hardware: %d\n", ret); @@ -3294,7 +3321,7 @@ i915_gem_load(struct drm_device *dev) /* Old X drivers will take 0-2 for front, back, depth buffers */ dev_priv->fence_reg_start = 3; - if (IS_I965G(dev)) + if (IS_I965G(dev) || IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) dev_priv->num_fence_regs = 16; else dev_priv->num_fence_regs = 8; diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 241f39b7f460..fa1685cba840 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -173,6 +173,73 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev) dev_priv->mm.bit_6_swizzle_y = swizzle_y; } + +/** + * Returns the size of the fence for a tiled object of the given size. + */ +static int +i915_get_fence_size(struct drm_device *dev, int size) +{ + int i; + int start; + + if (IS_I965G(dev)) { + /* The 965 can have fences at any page boundary. */ + return ALIGN(size, 4096); + } else { + /* Align the size to a power of two greater than the smallest + * fence size. + */ + if (IS_I9XX(dev)) + start = 1024 * 1024; + else + start = 512 * 1024; + + for (i = start; i < size; i <<= 1) + ; + + return i; + } +} + +/* Check pitch constriants for all chips & tiling formats */ +static bool +i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) +{ + int tile_width; + + /* Linear is always fine */ + if (tiling_mode == I915_TILING_NONE) + return true; + + if (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)) + tile_width = 128; + else + tile_width = 512; + + /* 965+ just needs multiples of tile width */ + if (IS_I965G(dev)) { + if (stride & (tile_width - 1)) + return false; + return true; + } + + /* Pre-965 needs power of two tile widths */ + if (stride < tile_width) + return false; + + if (stride & (stride - 1)) + return false; + + /* We don't handle the aperture area covered by the fence being bigger + * than the object size. + */ + if (i915_get_fence_size(dev, size) != size) + return false; + + return true; +} + /** * Sets the tiling mode of an object, returning the required swizzling of * bit 6 of addresses in the object. @@ -191,6 +258,11 @@ i915_gem_set_tiling(struct drm_device *dev, void *data, return -EINVAL; obj_priv = obj->driver_private; + if (!i915_tiling_ok(dev, args->stride, obj->size, args->tiling_mode)) { + drm_gem_object_unreference(obj); + return -EINVAL; + } + mutex_lock(&dev->struct_mutex); if (args->tiling_mode == I915_TILING_NONE) { @@ -207,7 +279,24 @@ i915_gem_set_tiling(struct drm_device *dev, void *data, args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE; } } - obj_priv->tiling_mode = args->tiling_mode; + if (args->tiling_mode != obj_priv->tiling_mode) { + int ret; + + /* Unbind the object, as switching tiling means we're + * switching the cache organization due to fencing, probably. + */ + ret = i915_gem_object_unbind(obj); + if (ret != 0) { + WARN(ret != -ERESTARTSYS, + "failed to unbind object for tiling switch"); + args->tiling_mode = obj_priv->tiling_mode; + mutex_unlock(&dev->struct_mutex); + drm_gem_object_unreference(obj); + + return ret; + } + obj_priv->tiling_mode = args->tiling_mode; + } obj_priv->stride = args->stride; mutex_unlock(&dev->struct_mutex); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 6290219de6c8..548ff2c66431 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -174,6 +174,19 @@ u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) return count; } +u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe) +{ + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + int reg = pipe ? PIPEB_FRMCOUNT_GM45 : PIPEA_FRMCOUNT_GM45; + + if (!i915_pipe_enabled(dev, pipe)) { + DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe); + return 0; + } + + return I915_READ(reg); +} + irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 273162579e1b..9d6539a868b3 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -186,12 +186,12 @@ #define FENCE_REG_830_0 0x2000 #define I830_FENCE_START_MASK 0x07f80000 #define I830_FENCE_TILING_Y_SHIFT 12 -#define I830_FENCE_SIZE_BITS(size) ((get_order(size >> 19) - 1) << 8) +#define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8) #define I830_FENCE_PITCH_SHIFT 4 #define I830_FENCE_REG_VALID (1<<0) #define I915_FENCE_START_MASK 0x0ff00000 -#define I915_FENCE_SIZE_BITS(size) ((get_order(size >> 20) - 1) << 8) +#define I915_FENCE_SIZE_BITS(size) ((ffs((size) >> 20) - 1) << 8) #define FENCE_REG_965_0 0x03000 #define I965_FENCE_PITCH_SHIFT 2 @@ -1371,6 +1371,9 @@ #define PIPE_FRAME_LOW_SHIFT 24 #define PIPE_PIXEL_MASK 0x00ffffff #define PIPE_PIXEL_SHIFT 0 +/* GM45+ just has to be different */ +#define PIPEA_FRMCOUNT_GM45 0x70040 +#define PIPEA_FLIPCOUNT_GM45 0x70044 /* Cursor A & B regs */ #define CURACNTR 0x70080 @@ -1439,6 +1442,9 @@ #define PIPEBSTAT 0x71024 #define PIPEBFRAMEHIGH 0x71040 #define PIPEBFRAMEPIXEL 0x71044 +#define PIPEB_FRMCOUNT_GM45 0x71040 +#define PIPEB_FLIPCOUNT_GM45 0x71044 + /* Display B control */ #define DSPBCNTR 0x71180 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 31c3732b7a69..bbdd72909a11 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -755,6 +755,8 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, case INTEL_OUTPUT_SDVO: case INTEL_OUTPUT_HDMI: is_sdvo = true; + if (intel_output->needs_tv_clock) + is_tv = true; break; case INTEL_OUTPUT_DVO: is_dvo = true; @@ -1452,6 +1454,7 @@ static int intel_connector_clones(struct drm_device *dev, int type_mask) static void intel_setup_outputs(struct drm_device *dev) { + struct drm_i915_private *dev_priv = dev->dev_private; struct drm_connector *connector; intel_crt_init(dev); @@ -1463,13 +1466,16 @@ static void intel_setup_outputs(struct drm_device *dev) if (IS_I9XX(dev)) { int found; - found = intel_sdvo_init(dev, SDVOB); - if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) - intel_hdmi_init(dev, SDVOB); - - found = intel_sdvo_init(dev, SDVOC); - if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) - intel_hdmi_init(dev, SDVOC); + if (I915_READ(SDVOB) & SDVO_DETECTED) { + found = intel_sdvo_init(dev, SDVOB); + if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) + intel_hdmi_init(dev, SDVOB); + } + if (!IS_G4X(dev) || (I915_READ(SDVOB) & SDVO_DETECTED)) { + found = intel_sdvo_init(dev, SDVOC); + if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) + intel_hdmi_init(dev, SDVOC); + } } else intel_dvo_init(dev); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 8a4cc50c5b4e..957daef8edff 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -82,6 +82,7 @@ struct intel_output { struct intel_i2c_chan *i2c_bus; /* for control functions */ struct intel_i2c_chan *ddc_bus; /* for DDC only stuff */ bool load_detect_temp; + bool needs_tv_clock; void *dev_priv; }; diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 6b1148fc2cbe..6d4f91265354 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -27,6 +27,7 @@ * Jesse Barnes <jesse.barnes@intel.com> */ +#include <linux/dmi.h> #include <linux/i2c.h> #include "drmP.h" #include "drm.h" @@ -311,10 +312,8 @@ static int intel_lvds_get_modes(struct drm_connector *connector) if (dev_priv->panel_fixed_mode != NULL) { struct drm_display_mode *mode; - mutex_unlock(&dev->mode_config.mutex); mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode); drm_mode_probed_add(connector, mode); - mutex_unlock(&dev->mode_config.mutex); return 1; } @@ -405,6 +404,16 @@ void intel_lvds_init(struct drm_device *dev) u32 lvds; int pipe; + /* Blacklist machines that we know falsely report LVDS. */ + /* FIXME: add a check for the Aopen Mini PC */ + + /* Apple Mac Mini Core Duo and Mac Mini Core 2 Duo */ + if(dmi_match(DMI_PRODUCT_NAME, "Macmini1,1") || + dmi_match(DMI_PRODUCT_NAME, "Macmini2,1")) { + DRM_DEBUG("Skipping LVDS initialization for Apple Mac Mini\n"); + return; + } + intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL); if (!intel_output) { return; @@ -458,7 +467,7 @@ void intel_lvds_init(struct drm_device *dev) dev_priv->panel_fixed_mode = drm_mode_duplicate(dev, scan); mutex_unlock(&dev->mode_config.mutex); - goto out; /* FIXME: check for quirks */ + goto out; } mutex_unlock(&dev->mode_config.mutex); } @@ -492,7 +501,7 @@ void intel_lvds_init(struct drm_device *dev) if (dev_priv->panel_fixed_mode) { dev_priv->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; - goto out; /* FIXME: check for quirks */ + goto out; } } @@ -500,38 +509,6 @@ void intel_lvds_init(struct drm_device *dev) if (!dev_priv->panel_fixed_mode) goto failed; - /* FIXME: detect aopen & mac mini type stuff automatically? */ - /* - * Blacklist machines with BIOSes that list an LVDS panel without - * actually having one. - */ - if (IS_I945GM(dev)) { - /* aopen mini pc */ - if (dev->pdev->subsystem_vendor == 0xa0a0) - goto failed; - - if ((dev->pdev->subsystem_vendor == 0x8086) && - (dev->pdev->subsystem_device == 0x7270)) { - /* It's a Mac Mini or Macbook Pro. - * - * Apple hardware is out to get us. The macbook pro - * has a real LVDS panel, but the mac mini does not, - * and they have the same device IDs. We'll - * distinguish by panel size, on the assumption - * that Apple isn't about to make any machines with an - * 800x600 display. - */ - - if (dev_priv->panel_fixed_mode != NULL && - dev_priv->panel_fixed_mode->hdisplay == 800 && - dev_priv->panel_fixed_mode->vdisplay == 600) { - DRM_DEBUG("Suspected Mac Mini, ignoring the LVDS\n"); - goto failed; - } - } - } - - out: drm_sysfs_connector_add(connector); return; diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 407215469102..a30508b639ba 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -40,13 +40,59 @@ struct intel_sdvo_priv { struct intel_i2c_chan *i2c_bus; int slaveaddr; + + /* Register for the SDVO device: SDVOB or SDVOC */ int output_device; - u16 active_outputs; + /* Active outputs controlled by this SDVO output */ + uint16_t controlled_output; + /* + * Capabilities of the SDVO device returned by + * i830_sdvo_get_capabilities() + */ struct intel_sdvo_caps caps; + + /* Pixel clock limitations reported by the SDVO device, in kHz */ int pixel_clock_min, pixel_clock_max; + /** + * This is set if we're going to treat the device as TV-out. + * + * While we have these nice friendly flags for output types that ought + * to decide this for us, the S-Video output on our HDMI+S-Video card + * shows up as RGB1 (VGA). + */ + bool is_tv; + + /** + * This is set if we treat the device as HDMI, instead of DVI. + */ + bool is_hdmi; + + /** + * Returned SDTV resolutions allowed for the current format, if the + * device reported it. + */ + struct intel_sdvo_sdtv_resolution_reply sdtv_resolutions; + + /** + * Current selected TV format. + * + * This is stored in the same structure that's passed to the device, for + * convenience. + */ + struct intel_sdvo_tv_format tv_format; + + /* + * supported encoding mode, used to determine whether HDMI is + * supported + */ + struct intel_sdvo_encode encode; + + /* DDC bus used by this SDVO output */ + uint8_t ddc_bus; + int save_sdvo_mult; u16 save_active_outputs; struct intel_sdvo_dtd save_input_dtd_1, save_input_dtd_2; @@ -148,8 +194,8 @@ static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr, #define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd} /** Mapping of command numbers to names, for debug output */ const static struct _sdvo_cmd_name { - u8 cmd; - char *name; + u8 cmd; + char *name; } sdvo_cmd_names[] = { SDVO_CMD_NAME_ENTRY(SDVO_CMD_RESET), SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DEVICE_CAPS), @@ -186,8 +232,35 @@ const static struct _sdvo_cmd_name { SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_TV_FORMATS), SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_FORMAT), SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_FORMAT), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_RESOLUTION_SUPPORT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_POWER_STATES), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_POWER_STATE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODER_POWER_STATE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_DISPLAY_POWER_STATE), SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTROL_BUS_SWITCH), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS), + /* HDMI op code */ + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPP_ENCODE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ENCODE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_PIXEL_REPLI), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PIXEL_REPLI), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY_CAP), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_COLORIMETRY), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_ENCRYPT_PREFER), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_AUDIO_STAT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_STAT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INDEX), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_INDEX), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INFO), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_AV_SPLIT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_AV_SPLIT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_TXRATE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_TXRATE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_DATA), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_DATA), }; #define SDVO_NAME(dev_priv) ((dev_priv)->output_device == SDVOB ? "SDVOB" : "SDVOC") @@ -506,6 +579,50 @@ static bool intel_sdvo_set_output_timing(struct intel_output *intel_output, SDVO_CMD_SET_OUTPUT_TIMINGS_PART1, dtd); } +static bool +intel_sdvo_create_preferred_input_timing(struct intel_output *output, + uint16_t clock, + uint16_t width, + uint16_t height) +{ + struct intel_sdvo_preferred_input_timing_args args; + uint8_t status; + + args.clock = clock; + args.width = width; + args.height = height; + intel_sdvo_write_cmd(output, SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING, + &args, sizeof(args)); + status = intel_sdvo_read_response(output, NULL, 0); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + return true; +} + +static bool intel_sdvo_get_preferred_input_timing(struct intel_output *output, + struct intel_sdvo_dtd *dtd) +{ + bool status; + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1, + NULL, 0); + + status = intel_sdvo_read_response(output, &dtd->part1, + sizeof(dtd->part1)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2, + NULL, 0); + + status = intel_sdvo_read_response(output, &dtd->part2, + sizeof(dtd->part2)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + return false; +} static int intel_sdvo_get_clock_rate_mult(struct intel_output *intel_output) { @@ -536,36 +653,12 @@ static bool intel_sdvo_set_clock_rate_mult(struct intel_output *intel_output, u8 return true; } -static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - /* Make the CRTC code factor in the SDVO pixel multiplier. The SDVO - * device will be told of the multiplier during mode_set. - */ - adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode); - return true; -} - -static void intel_sdvo_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) +static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd, + struct drm_display_mode *mode) { - struct drm_device *dev = encoder->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_crtc *crtc = encoder->crtc; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct intel_output *intel_output = enc_to_intel_output(encoder); - struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; - u16 width, height; - u16 h_blank_len, h_sync_len, v_blank_len, v_sync_len; - u16 h_sync_offset, v_sync_offset; - u32 sdvox; - struct intel_sdvo_dtd output_dtd; - int sdvo_pixel_multiply; - - if (!mode) - return; + uint16_t width, height; + uint16_t h_blank_len, h_sync_len, v_blank_len, v_sync_len; + uint16_t h_sync_offset, v_sync_offset; width = mode->crtc_hdisplay; height = mode->crtc_vdisplay; @@ -580,93 +673,423 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start; v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start; - output_dtd.part1.clock = mode->clock / 10; - output_dtd.part1.h_active = width & 0xff; - output_dtd.part1.h_blank = h_blank_len & 0xff; - output_dtd.part1.h_high = (((width >> 8) & 0xf) << 4) | + dtd->part1.clock = mode->clock / 10; + dtd->part1.h_active = width & 0xff; + dtd->part1.h_blank = h_blank_len & 0xff; + dtd->part1.h_high = (((width >> 8) & 0xf) << 4) | ((h_blank_len >> 8) & 0xf); - output_dtd.part1.v_active = height & 0xff; - output_dtd.part1.v_blank = v_blank_len & 0xff; - output_dtd.part1.v_high = (((height >> 8) & 0xf) << 4) | + dtd->part1.v_active = height & 0xff; + dtd->part1.v_blank = v_blank_len & 0xff; + dtd->part1.v_high = (((height >> 8) & 0xf) << 4) | ((v_blank_len >> 8) & 0xf); - output_dtd.part2.h_sync_off = h_sync_offset; - output_dtd.part2.h_sync_width = h_sync_len & 0xff; - output_dtd.part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 | + dtd->part2.h_sync_off = h_sync_offset; + dtd->part2.h_sync_width = h_sync_len & 0xff; + dtd->part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 | (v_sync_len & 0xf); - output_dtd.part2.sync_off_width_high = ((h_sync_offset & 0x300) >> 2) | + dtd->part2.sync_off_width_high = ((h_sync_offset & 0x300) >> 2) | ((h_sync_len & 0x300) >> 4) | ((v_sync_offset & 0x30) >> 2) | ((v_sync_len & 0x30) >> 4); - output_dtd.part2.dtd_flags = 0x18; + dtd->part2.dtd_flags = 0x18; if (mode->flags & DRM_MODE_FLAG_PHSYNC) - output_dtd.part2.dtd_flags |= 0x2; + dtd->part2.dtd_flags |= 0x2; if (mode->flags & DRM_MODE_FLAG_PVSYNC) - output_dtd.part2.dtd_flags |= 0x4; + dtd->part2.dtd_flags |= 0x4; + + dtd->part2.sdvo_flags = 0; + dtd->part2.v_sync_off_high = v_sync_offset & 0xc0; + dtd->part2.reserved = 0; +} + +static void intel_sdvo_get_mode_from_dtd(struct drm_display_mode * mode, + struct intel_sdvo_dtd *dtd) +{ + uint16_t width, height; + uint16_t h_blank_len, h_sync_len, v_blank_len, v_sync_len; + uint16_t h_sync_offset, v_sync_offset; + + width = mode->crtc_hdisplay; + height = mode->crtc_vdisplay; + + /* do some mode translations */ + h_blank_len = mode->crtc_hblank_end - mode->crtc_hblank_start; + h_sync_len = mode->crtc_hsync_end - mode->crtc_hsync_start; + + v_blank_len = mode->crtc_vblank_end - mode->crtc_vblank_start; + v_sync_len = mode->crtc_vsync_end - mode->crtc_vsync_start; + + h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start; + v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start; + + mode->hdisplay = dtd->part1.h_active; + mode->hdisplay += ((dtd->part1.h_high >> 4) & 0x0f) << 8; + mode->hsync_start = mode->hdisplay + dtd->part2.h_sync_off; + mode->hsync_start += (dtd->part2.sync_off_width_high & 0xa0) << 2; + mode->hsync_end = mode->hsync_start + dtd->part2.h_sync_width; + mode->hsync_end += (dtd->part2.sync_off_width_high & 0x30) << 4; + mode->htotal = mode->hdisplay + dtd->part1.h_blank; + mode->htotal += (dtd->part1.h_high & 0xf) << 8; + + mode->vdisplay = dtd->part1.v_active; + mode->vdisplay += ((dtd->part1.v_high >> 4) & 0x0f) << 8; + mode->vsync_start = mode->vdisplay; + mode->vsync_start += (dtd->part2.v_sync_off_width >> 4) & 0xf; + mode->vsync_start += (dtd->part2.sync_off_width_high & 0x0a) << 2; + mode->vsync_start += dtd->part2.v_sync_off_high & 0xc0; + mode->vsync_end = mode->vsync_start + + (dtd->part2.v_sync_off_width & 0xf); + mode->vsync_end += (dtd->part2.sync_off_width_high & 0x3) << 4; + mode->vtotal = mode->vdisplay + dtd->part1.v_blank; + mode->vtotal += (dtd->part1.v_high & 0xf) << 8; + + mode->clock = dtd->part1.clock * 10; + + mode->flags &= (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC); + if (dtd->part2.dtd_flags & 0x2) + mode->flags |= DRM_MODE_FLAG_PHSYNC; + if (dtd->part2.dtd_flags & 0x4) + mode->flags |= DRM_MODE_FLAG_PVSYNC; +} + +static bool intel_sdvo_get_supp_encode(struct intel_output *output, + struct intel_sdvo_encode *encode) +{ + uint8_t status; + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_SUPP_ENCODE, NULL, 0); + status = intel_sdvo_read_response(output, encode, sizeof(*encode)); + if (status != SDVO_CMD_STATUS_SUCCESS) { /* non-support means DVI */ + memset(encode, 0, sizeof(*encode)); + return false; + } + + return true; +} + +static bool intel_sdvo_set_encode(struct intel_output *output, uint8_t mode) +{ + uint8_t status; + + intel_sdvo_write_cmd(output, SDVO_CMD_SET_ENCODE, &mode, 1); + status = intel_sdvo_read_response(output, NULL, 0); + + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +static bool intel_sdvo_set_colorimetry(struct intel_output *output, + uint8_t mode) +{ + uint8_t status; + + intel_sdvo_write_cmd(output, SDVO_CMD_SET_COLORIMETRY, &mode, 1); + status = intel_sdvo_read_response(output, NULL, 0); + + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +#if 0 +static void intel_sdvo_dump_hdmi_buf(struct intel_output *output) +{ + int i, j; + uint8_t set_buf_index[2]; + uint8_t av_split; + uint8_t buf_size; + uint8_t buf[48]; + uint8_t *pos; + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_HBUF_AV_SPLIT, NULL, 0); + intel_sdvo_read_response(output, &av_split, 1); + + for (i = 0; i <= av_split; i++) { + set_buf_index[0] = i; set_buf_index[1] = 0; + intel_sdvo_write_cmd(output, SDVO_CMD_SET_HBUF_INDEX, + set_buf_index, 2); + intel_sdvo_write_cmd(output, SDVO_CMD_GET_HBUF_INFO, NULL, 0); + intel_sdvo_read_response(output, &buf_size, 1); + + pos = buf; + for (j = 0; j <= buf_size; j += 8) { + intel_sdvo_write_cmd(output, SDVO_CMD_GET_HBUF_DATA, + NULL, 0); + intel_sdvo_read_response(output, pos, 8); + pos += 8; + } + } +} +#endif + +static void intel_sdvo_set_hdmi_buf(struct intel_output *output, int index, + uint8_t *data, int8_t size, uint8_t tx_rate) +{ + uint8_t set_buf_index[2]; + + set_buf_index[0] = index; + set_buf_index[1] = 0; + + intel_sdvo_write_cmd(output, SDVO_CMD_SET_HBUF_INDEX, set_buf_index, 2); + + for (; size > 0; size -= 8) { + intel_sdvo_write_cmd(output, SDVO_CMD_SET_HBUF_DATA, data, 8); + data += 8; + } + + intel_sdvo_write_cmd(output, SDVO_CMD_SET_HBUF_TXRATE, &tx_rate, 1); +} + +static uint8_t intel_sdvo_calc_hbuf_csum(uint8_t *data, uint8_t size) +{ + uint8_t csum = 0; + int i; + + for (i = 0; i < size; i++) + csum += data[i]; + + return 0x100 - csum; +} + +#define DIP_TYPE_AVI 0x82 +#define DIP_VERSION_AVI 0x2 +#define DIP_LEN_AVI 13 + +struct dip_infoframe { + uint8_t type; + uint8_t version; + uint8_t len; + uint8_t checksum; + union { + struct { + /* Packet Byte #1 */ + uint8_t S:2; + uint8_t B:2; + uint8_t A:1; + uint8_t Y:2; + uint8_t rsvd1:1; + /* Packet Byte #2 */ + uint8_t R:4; + uint8_t M:2; + uint8_t C:2; + /* Packet Byte #3 */ + uint8_t SC:2; + uint8_t Q:2; + uint8_t EC:3; + uint8_t ITC:1; + /* Packet Byte #4 */ + uint8_t VIC:7; + uint8_t rsvd2:1; + /* Packet Byte #5 */ + uint8_t PR:4; + uint8_t rsvd3:4; + /* Packet Byte #6~13 */ + uint16_t top_bar_end; + uint16_t bottom_bar_start; + uint16_t left_bar_end; + uint16_t right_bar_start; + } avi; + struct { + /* Packet Byte #1 */ + uint8_t channel_count:3; + uint8_t rsvd1:1; + uint8_t coding_type:4; + /* Packet Byte #2 */ + uint8_t sample_size:2; /* SS0, SS1 */ + uint8_t sample_frequency:3; + uint8_t rsvd2:3; + /* Packet Byte #3 */ + uint8_t coding_type_private:5; + uint8_t rsvd3:3; + /* Packet Byte #4 */ + uint8_t channel_allocation; + /* Packet Byte #5 */ + uint8_t rsvd4:3; + uint8_t level_shift:4; + uint8_t downmix_inhibit:1; + } audio; + uint8_t payload[28]; + } __attribute__ ((packed)) u; +} __attribute__((packed)); + +static void intel_sdvo_set_avi_infoframe(struct intel_output *output, + struct drm_display_mode * mode) +{ + struct dip_infoframe avi_if = { + .type = DIP_TYPE_AVI, + .version = DIP_VERSION_AVI, + .len = DIP_LEN_AVI, + }; + + avi_if.checksum = intel_sdvo_calc_hbuf_csum((uint8_t *)&avi_if, + 4 + avi_if.len); + intel_sdvo_set_hdmi_buf(output, 1, (uint8_t *)&avi_if, 4 + avi_if.len, + SDVO_HBUF_TX_VSYNC); +} + +static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct intel_output *output = enc_to_intel_output(encoder); + struct intel_sdvo_priv *dev_priv = output->dev_priv; - output_dtd.part2.sdvo_flags = 0; - output_dtd.part2.v_sync_off_high = v_sync_offset & 0xc0; - output_dtd.part2.reserved = 0; + if (!dev_priv->is_tv) { + /* Make the CRTC code factor in the SDVO pixel multiplier. The + * SDVO device will be told of the multiplier during mode_set. + */ + adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode); + } else { + struct intel_sdvo_dtd output_dtd; + bool success; + + /* We need to construct preferred input timings based on our + * output timings. To do that, we have to set the output + * timings, even though this isn't really the right place in + * the sequence to do it. Oh well. + */ + + + /* Set output timings */ + intel_sdvo_get_dtd_from_mode(&output_dtd, mode); + intel_sdvo_set_target_output(output, + dev_priv->controlled_output); + intel_sdvo_set_output_timing(output, &output_dtd); + + /* Set the input timing to the screen. Assume always input 0. */ + intel_sdvo_set_target_input(output, true, false); + + + success = intel_sdvo_create_preferred_input_timing(output, + mode->clock / 10, + mode->hdisplay, + mode->vdisplay); + if (success) { + struct intel_sdvo_dtd input_dtd; - /* Set the output timing to the screen */ - intel_sdvo_set_target_output(intel_output, sdvo_priv->active_outputs); - intel_sdvo_set_output_timing(intel_output, &output_dtd); + intel_sdvo_get_preferred_input_timing(output, + &input_dtd); + intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd); + + } else { + return false; + } + } + return true; +} + +static void intel_sdvo_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc = encoder->crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_output *output = enc_to_intel_output(encoder); + struct intel_sdvo_priv *sdvo_priv = output->dev_priv; + u32 sdvox = 0; + int sdvo_pixel_multiply; + struct intel_sdvo_in_out_map in_out; + struct intel_sdvo_dtd input_dtd; + u8 status; + + if (!mode) + return; + + /* First, set the input mapping for the first input to our controlled + * output. This is only correct if we're a single-input device, in + * which case the first input is the output from the appropriate SDVO + * channel on the motherboard. In a two-input device, the first input + * will be SDVOB and the second SDVOC. + */ + in_out.in0 = sdvo_priv->controlled_output; + in_out.in1 = 0; + + intel_sdvo_write_cmd(output, SDVO_CMD_SET_IN_OUT_MAP, + &in_out, sizeof(in_out)); + status = intel_sdvo_read_response(output, NULL, 0); + + if (sdvo_priv->is_hdmi) { + intel_sdvo_set_avi_infoframe(output, mode); + sdvox |= SDVO_AUDIO_ENABLE; + } + + intel_sdvo_get_dtd_from_mode(&input_dtd, mode); + + /* If it's a TV, we already set the output timing in mode_fixup. + * Otherwise, the output timing is equal to the input timing. + */ + if (!sdvo_priv->is_tv) { + /* Set the output timing to the screen */ + intel_sdvo_set_target_output(output, + sdvo_priv->controlled_output); + intel_sdvo_set_output_timing(output, &input_dtd); + } /* Set the input timing to the screen. Assume always input 0. */ - intel_sdvo_set_target_input(intel_output, true, false); + intel_sdvo_set_target_input(output, true, false); - /* We would like to use i830_sdvo_create_preferred_input_timing() to + /* We would like to use intel_sdvo_create_preferred_input_timing() to * provide the device with a timing it can support, if it supports that * feature. However, presumably we would need to adjust the CRTC to * output the preferred timing, and we don't support that currently. */ - intel_sdvo_set_input_timing(intel_output, &output_dtd); +#if 0 + success = intel_sdvo_create_preferred_input_timing(output, clock, + width, height); + if (success) { + struct intel_sdvo_dtd *input_dtd; + + intel_sdvo_get_preferred_input_timing(output, &input_dtd); + intel_sdvo_set_input_timing(output, &input_dtd); + } +#else + intel_sdvo_set_input_timing(output, &input_dtd); +#endif switch (intel_sdvo_get_pixel_multiplier(mode)) { case 1: - intel_sdvo_set_clock_rate_mult(intel_output, + intel_sdvo_set_clock_rate_mult(output, SDVO_CLOCK_RATE_MULT_1X); break; case 2: - intel_sdvo_set_clock_rate_mult(intel_output, + intel_sdvo_set_clock_rate_mult(output, SDVO_CLOCK_RATE_MULT_2X); break; case 4: - intel_sdvo_set_clock_rate_mult(intel_output, + intel_sdvo_set_clock_rate_mult(output, SDVO_CLOCK_RATE_MULT_4X); break; } /* Set the SDVO control regs. */ - if (0/*IS_I965GM(dev)*/) { - sdvox = SDVO_BORDER_ENABLE; - } else { - sdvox = I915_READ(sdvo_priv->output_device); - switch (sdvo_priv->output_device) { - case SDVOB: - sdvox &= SDVOB_PRESERVE_MASK; - break; - case SDVOC: - sdvox &= SDVOC_PRESERVE_MASK; - break; - } - sdvox |= (9 << 19) | SDVO_BORDER_ENABLE; - } + if (IS_I965G(dev)) { + sdvox |= SDVO_BORDER_ENABLE | + SDVO_VSYNC_ACTIVE_HIGH | + SDVO_HSYNC_ACTIVE_HIGH; + } else { + sdvox |= I915_READ(sdvo_priv->output_device); + switch (sdvo_priv->output_device) { + case SDVOB: + sdvox &= SDVOB_PRESERVE_MASK; + break; + case SDVOC: + sdvox &= SDVOC_PRESERVE_MASK; + break; + } + sdvox |= (9 << 19) | SDVO_BORDER_ENABLE; + } if (intel_crtc->pipe == 1) sdvox |= SDVO_PIPE_B_SELECT; sdvo_pixel_multiply = intel_sdvo_get_pixel_multiplier(mode); if (IS_I965G(dev)) { - /* done in crtc_mode_set as the dpll_md reg must be written - early */ - } else if (IS_I945G(dev) || IS_I945GM(dev)) { - /* done in crtc_mode_set as it lives inside the - dpll register */ + /* done in crtc_mode_set as the dpll_md reg must be written early */ + } else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) { + /* done in crtc_mode_set as it lives inside the dpll register */ } else { sdvox |= (sdvo_pixel_multiply - 1) << SDVO_PORT_MULTIPLY_SHIFT; } - intel_sdvo_write_sdvox(intel_output, sdvox); + intel_sdvo_write_sdvox(output, sdvox); } static void intel_sdvo_dpms(struct drm_encoder *encoder, int mode) @@ -714,7 +1137,7 @@ static void intel_sdvo_dpms(struct drm_encoder *encoder, int mode) if (0) intel_sdvo_set_encoder_power_state(intel_output, mode); - intel_sdvo_set_active_outputs(intel_output, sdvo_priv->active_outputs); + intel_sdvo_set_active_outputs(intel_output, sdvo_priv->controlled_output); } return; } @@ -752,6 +1175,9 @@ static void intel_sdvo_save(struct drm_connector *connector) &sdvo_priv->save_output_dtd[o]); } } + if (sdvo_priv->is_tv) { + /* XXX: Save TV format/enhancements. */ + } sdvo_priv->save_SDVOX = I915_READ(sdvo_priv->output_device); } @@ -759,7 +1185,6 @@ static void intel_sdvo_save(struct drm_connector *connector) static void intel_sdvo_restore(struct drm_connector *connector) { struct drm_device *dev = connector->dev; - struct drm_i915_private *dev_priv = dev->dev_private; struct intel_output *intel_output = to_intel_output(connector); struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; int o; @@ -790,7 +1215,11 @@ static void intel_sdvo_restore(struct drm_connector *connector) intel_sdvo_set_clock_rate_mult(intel_output, sdvo_priv->save_sdvo_mult); - I915_WRITE(sdvo_priv->output_device, sdvo_priv->save_SDVOX); + if (sdvo_priv->is_tv) { + /* XXX: Restore TV format/enhancements. */ + } + + intel_sdvo_write_sdvox(intel_output, sdvo_priv->save_SDVOX); if (sdvo_priv->save_SDVOX & SDVO_ENABLE) { @@ -916,20 +1345,173 @@ static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connect status = intel_sdvo_read_response(intel_output, &response, 2); DRM_DEBUG("SDVO response %d %d\n", response[0], response[1]); + + if (status != SDVO_CMD_STATUS_SUCCESS) + return connector_status_unknown; + if ((response[0] != 0) || (response[1] != 0)) return connector_status_connected; else return connector_status_disconnected; } -static int intel_sdvo_get_modes(struct drm_connector *connector) +static void intel_sdvo_get_ddc_modes(struct drm_connector *connector) { struct intel_output *intel_output = to_intel_output(connector); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; /* set the bus switch and get the modes */ - intel_sdvo_set_control_bus_switch(intel_output, SDVO_CONTROL_BUS_DDC2); + intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); intel_ddc_get_modes(intel_output); +#if 0 + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + /* Mac mini hack. On this device, I get DDC through the analog, which + * load-detects as disconnected. I fail to DDC through the SDVO DDC, + * but it does load-detect as connected. So, just steal the DDC bits + * from analog when we fail at finding it the right way. + */ + crt = xf86_config->output[0]; + intel_output = crt->driver_private; + if (intel_output->type == I830_OUTPUT_ANALOG && + crt->funcs->detect(crt) == XF86OutputStatusDisconnected) { + I830I2CInit(pScrn, &intel_output->pDDCBus, GPIOA, "CRTDDC_A"); + edid_mon = xf86OutputGetEDID(crt, intel_output->pDDCBus); + xf86DestroyI2CBusRec(intel_output->pDDCBus, true, true); + } + if (edid_mon) { + xf86OutputSetEDID(output, edid_mon); + modes = xf86OutputGetEDIDModes(output); + } +#endif +} + +/** + * This function checks the current TV format, and chooses a default if + * it hasn't been set. + */ +static void +intel_sdvo_check_tv_format(struct intel_output *output) +{ + struct intel_sdvo_priv *dev_priv = output->dev_priv; + struct intel_sdvo_tv_format format, unset; + uint8_t status; + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_TV_FORMAT, NULL, 0); + status = intel_sdvo_read_response(output, &format, sizeof(format)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return; + + memset(&unset, 0, sizeof(unset)); + if (memcmp(&format, &unset, sizeof(format))) { + DRM_DEBUG("%s: Choosing default TV format of NTSC-M\n", + SDVO_NAME(dev_priv)); + + format.ntsc_m = true; + intel_sdvo_write_cmd(output, SDVO_CMD_SET_TV_FORMAT, NULL, 0); + status = intel_sdvo_read_response(output, NULL, 0); + } +} + +/* + * Set of SDVO TV modes. + * Note! This is in reply order (see loop in get_tv_modes). + * XXX: all 60Hz refresh? + */ +struct drm_display_mode sdvo_tv_modes[] = { + { DRM_MODE("320x200", DRM_MODE_TYPE_DRIVER, 5815680, 321, 384, 416, + 200, 0, 232, 201, 233, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("320x240", DRM_MODE_TYPE_DRIVER, 6814080, 321, 384, 416, + 240, 0, 272, 241, 273, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("400x300", DRM_MODE_TYPE_DRIVER, 9910080, 401, 464, 496, + 300, 0, 332, 301, 333, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("640x350", DRM_MODE_TYPE_DRIVER, 16913280, 641, 704, 736, + 350, 0, 382, 351, 383, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("640x400", DRM_MODE_TYPE_DRIVER, 19121280, 641, 704, 736, + 400, 0, 432, 401, 433, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("640x400", DRM_MODE_TYPE_DRIVER, 19121280, 641, 704, 736, + 400, 0, 432, 401, 433, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("704x480", DRM_MODE_TYPE_DRIVER, 24624000, 705, 768, 800, + 480, 0, 512, 481, 513, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("704x576", DRM_MODE_TYPE_DRIVER, 29232000, 705, 768, 800, + 576, 0, 608, 577, 609, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("720x350", DRM_MODE_TYPE_DRIVER, 18751680, 721, 784, 816, + 350, 0, 382, 351, 383, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 21199680, 721, 784, 816, + 400, 0, 432, 401, 433, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 25116480, 721, 784, 816, + 480, 0, 512, 481, 513, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("720x540", DRM_MODE_TYPE_DRIVER, 28054080, 721, 784, 816, + 540, 0, 572, 541, 573, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 29816640, 721, 784, 816, + 576, 0, 608, 577, 609, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("768x576", DRM_MODE_TYPE_DRIVER, 31570560, 769, 832, 864, + 576, 0, 608, 577, 609, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 34030080, 801, 864, 896, + 600, 0, 632, 601, 633, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("832x624", DRM_MODE_TYPE_DRIVER, 36581760, 833, 896, 928, + 624, 0, 656, 625, 657, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("920x766", DRM_MODE_TYPE_DRIVER, 48707040, 921, 984, 1016, + 766, 0, 798, 767, 799, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 53827200, 1025, 1088, 1120, + 768, 0, 800, 769, 801, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 87265920, 1281, 1344, 1376, + 1024, 0, 1056, 1025, 1057, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, +}; + +static void intel_sdvo_get_tv_modes(struct drm_connector *connector) +{ + struct intel_output *output = to_intel_output(connector); + uint32_t reply = 0; + uint8_t status; + int i = 0; + + intel_sdvo_check_tv_format(output); + + /* Read the list of supported input resolutions for the selected TV + * format. + */ + intel_sdvo_write_cmd(output, SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT, + NULL, 0); + status = intel_sdvo_read_response(output, &reply, 3); + if (status != SDVO_CMD_STATUS_SUCCESS) + return; + + for (i = 0; i < ARRAY_SIZE(sdvo_tv_modes); i++) + if (reply & (1 << i)) + drm_mode_probed_add(connector, &sdvo_tv_modes[i]); +} + +static int intel_sdvo_get_modes(struct drm_connector *connector) +{ + struct intel_output *output = to_intel_output(connector); + struct intel_sdvo_priv *sdvo_priv = output->dev_priv; + + if (sdvo_priv->is_tv) + intel_sdvo_get_tv_modes(connector); + else + intel_sdvo_get_ddc_modes(connector); + if (list_empty(&connector->probed_modes)) return 0; return 1; @@ -978,6 +1560,65 @@ static const struct drm_encoder_funcs intel_sdvo_enc_funcs = { }; +/** + * Choose the appropriate DDC bus for control bus switch command for this + * SDVO output based on the controlled output. + * + * DDC bus number assignment is in a priority order of RGB outputs, then TMDS + * outputs, then LVDS outputs. + */ +static void +intel_sdvo_select_ddc_bus(struct intel_sdvo_priv *dev_priv) +{ + uint16_t mask = 0; + unsigned int num_bits; + + /* Make a mask of outputs less than or equal to our own priority in the + * list. + */ + switch (dev_priv->controlled_output) { + case SDVO_OUTPUT_LVDS1: + mask |= SDVO_OUTPUT_LVDS1; + case SDVO_OUTPUT_LVDS0: + mask |= SDVO_OUTPUT_LVDS0; + case SDVO_OUTPUT_TMDS1: + mask |= SDVO_OUTPUT_TMDS1; + case SDVO_OUTPUT_TMDS0: + mask |= SDVO_OUTPUT_TMDS0; + case SDVO_OUTPUT_RGB1: + mask |= SDVO_OUTPUT_RGB1; + case SDVO_OUTPUT_RGB0: + mask |= SDVO_OUTPUT_RGB0; + break; + } + + /* Count bits to find what number we are in the priority list. */ + mask &= dev_priv->caps.output_flags; + num_bits = hweight16(mask); + if (num_bits > 3) { + /* if more than 3 outputs, default to DDC bus 3 for now */ + num_bits = 3; + } + + /* Corresponds to SDVO_CONTROL_BUS_DDCx */ + dev_priv->ddc_bus = 1 << num_bits; +} + +static bool +intel_sdvo_get_digital_encoding_mode(struct intel_output *output) +{ + struct intel_sdvo_priv *sdvo_priv = output->dev_priv; + uint8_t status; + + intel_sdvo_set_target_output(output, sdvo_priv->controlled_output); + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_ENCODE, NULL, 0); + status = intel_sdvo_read_response(output, &sdvo_priv->is_hdmi, 1); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + return true; +} + bool intel_sdvo_init(struct drm_device *dev, int output_device) { struct drm_connector *connector; @@ -1040,45 +1681,76 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps); - memset(&sdvo_priv->active_outputs, 0, sizeof(sdvo_priv->active_outputs)); + if (sdvo_priv->caps.output_flags & + (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)) { + if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0) + sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS0; + else + sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS1; + + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + encoder_type = DRM_MODE_ENCODER_TMDS; + connector_type = DRM_MODE_CONNECTOR_DVID; - /* TODO, CVBS, SVID, YPRPB & SCART outputs. */ - if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0) + if (intel_sdvo_get_supp_encode(intel_output, + &sdvo_priv->encode) && + intel_sdvo_get_digital_encoding_mode(intel_output) && + sdvo_priv->is_hdmi) { + /* enable hdmi encoding mode if supported */ + intel_sdvo_set_encode(intel_output, SDVO_ENCODE_HDMI); + intel_sdvo_set_colorimetry(intel_output, + SDVO_COLORIMETRY_RGB256); + connector_type = DRM_MODE_CONNECTOR_HDMIA; + } + } + else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_SVID0) { - sdvo_priv->active_outputs = SDVO_OUTPUT_RGB0; + sdvo_priv->controlled_output = SDVO_OUTPUT_SVID0; + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + encoder_type = DRM_MODE_ENCODER_TVDAC; + connector_type = DRM_MODE_CONNECTOR_SVIDEO; + sdvo_priv->is_tv = true; + intel_output->needs_tv_clock = true; + } + else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0) + { + sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0; connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_DAC; connector_type = DRM_MODE_CONNECTOR_VGA; } else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1) { - sdvo_priv->active_outputs = SDVO_OUTPUT_RGB1; + sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1; connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_DAC; connector_type = DRM_MODE_CONNECTOR_VGA; } - else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0) + else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS0) { - sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS0; + sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0; connector->display_info.subpixel_order = SubPixelHorizontalRGB; - encoder_type = DRM_MODE_ENCODER_TMDS; - connector_type = DRM_MODE_CONNECTOR_DVID; + encoder_type = DRM_MODE_ENCODER_LVDS; + connector_type = DRM_MODE_CONNECTOR_LVDS; } - else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS1) + else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS1) { - sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS1; + sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1; connector->display_info.subpixel_order = SubPixelHorizontalRGB; - encoder_type = DRM_MODE_ENCODER_TMDS; - connector_type = DRM_MODE_CONNECTOR_DVID; + encoder_type = DRM_MODE_ENCODER_LVDS; + connector_type = DRM_MODE_CONNECTOR_LVDS; } else { unsigned char bytes[2]; + sdvo_priv->controlled_output = 0; memcpy (bytes, &sdvo_priv->caps.output_flags, 2); - DRM_DEBUG("%s: No active RGB or TMDS outputs (0x%02x%02x)\n", + DRM_DEBUG("%s: Unknown SDVO output type (0x%02x%02x)\n", SDVO_NAME(sdvo_priv), bytes[0], bytes[1]); + encoder_type = DRM_MODE_ENCODER_NONE; + connector_type = DRM_MODE_CONNECTOR_Unknown; goto err_i2c; } @@ -1089,6 +1761,8 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc); drm_sysfs_connector_add(connector); + intel_sdvo_select_ddc_bus(sdvo_priv); + /* Set the input timing to the screen. Assume always input 0. */ intel_sdvo_set_target_input(intel_output, true, false); diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h index 861a43f8693c..1117b9c151a6 100644 --- a/drivers/gpu/drm/i915/intel_sdvo_regs.h +++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h @@ -173,6 +173,9 @@ struct intel_sdvo_get_trained_inputs_response { * Returns two struct intel_sdvo_output_flags structures. */ #define SDVO_CMD_GET_IN_OUT_MAP 0x06 +struct intel_sdvo_in_out_map { + u16 in0, in1; +}; /** * Sets the current mapping of SDVO inputs to outputs on the device. @@ -206,7 +209,8 @@ struct intel_sdvo_get_trained_inputs_response { struct intel_sdvo_get_interrupt_event_source_response { u16 interrupt_status; unsigned int ambient_light_interrupt:1; - unsigned int pad:7; + unsigned int hdmi_audio_encrypt_change:1; + unsigned int pad:6; } __attribute__((packed)); /** @@ -305,23 +309,411 @@ struct intel_sdvo_set_target_input_args { # define SDVO_CLOCK_RATE_MULT_4X (1 << 3) #define SDVO_CMD_GET_SUPPORTED_TV_FORMATS 0x27 +/** 5 bytes of bit flags for TV formats shared by all TV format functions */ +struct intel_sdvo_tv_format { + unsigned int ntsc_m:1; + unsigned int ntsc_j:1; + unsigned int ntsc_443:1; + unsigned int pal_b:1; + unsigned int pal_d:1; + unsigned int pal_g:1; + unsigned int pal_h:1; + unsigned int pal_i:1; + + unsigned int pal_m:1; + unsigned int pal_n:1; + unsigned int pal_nc:1; + unsigned int pal_60:1; + unsigned int secam_b:1; + unsigned int secam_d:1; + unsigned int secam_g:1; + unsigned int secam_k:1; + + unsigned int secam_k1:1; + unsigned int secam_l:1; + unsigned int secam_60:1; + unsigned int hdtv_std_smpte_240m_1080i_59:1; + unsigned int hdtv_std_smpte_240m_1080i_60:1; + unsigned int hdtv_std_smpte_260m_1080i_59:1; + unsigned int hdtv_std_smpte_260m_1080i_60:1; + unsigned int hdtv_std_smpte_274m_1080i_50:1; + + unsigned int hdtv_std_smpte_274m_1080i_59:1; + unsigned int hdtv_std_smpte_274m_1080i_60:1; + unsigned int hdtv_std_smpte_274m_1080p_23:1; + unsigned int hdtv_std_smpte_274m_1080p_24:1; + unsigned int hdtv_std_smpte_274m_1080p_25:1; + unsigned int hdtv_std_smpte_274m_1080p_29:1; + unsigned int hdtv_std_smpte_274m_1080p_30:1; + unsigned int hdtv_std_smpte_274m_1080p_50:1; + + unsigned int hdtv_std_smpte_274m_1080p_59:1; + unsigned int hdtv_std_smpte_274m_1080p_60:1; + unsigned int hdtv_std_smpte_295m_1080i_50:1; + unsigned int hdtv_std_smpte_295m_1080p_50:1; + unsigned int hdtv_std_smpte_296m_720p_59:1; + unsigned int hdtv_std_smpte_296m_720p_60:1; + unsigned int hdtv_std_smpte_296m_720p_50:1; + unsigned int hdtv_std_smpte_293m_480p_59:1; + + unsigned int hdtv_std_smpte_170m_480i_59:1; + unsigned int hdtv_std_iturbt601_576i_50:1; + unsigned int hdtv_std_iturbt601_576p_50:1; + unsigned int hdtv_std_eia_7702a_480i_60:1; + unsigned int hdtv_std_eia_7702a_480p_60:1; + unsigned int pad:3; +} __attribute__((packed)); #define SDVO_CMD_GET_TV_FORMAT 0x28 #define SDVO_CMD_SET_TV_FORMAT 0x29 +/** Returns the resolutiosn that can be used with the given TV format */ +#define SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT 0x83 +struct intel_sdvo_sdtv_resolution_request { + unsigned int ntsc_m:1; + unsigned int ntsc_j:1; + unsigned int ntsc_443:1; + unsigned int pal_b:1; + unsigned int pal_d:1; + unsigned int pal_g:1; + unsigned int pal_h:1; + unsigned int pal_i:1; + + unsigned int pal_m:1; + unsigned int pal_n:1; + unsigned int pal_nc:1; + unsigned int pal_60:1; + unsigned int secam_b:1; + unsigned int secam_d:1; + unsigned int secam_g:1; + unsigned int secam_k:1; + + unsigned int secam_k1:1; + unsigned int secam_l:1; + unsigned int secam_60:1; + unsigned int pad:5; +} __attribute__((packed)); + +struct intel_sdvo_sdtv_resolution_reply { + unsigned int res_320x200:1; + unsigned int res_320x240:1; + unsigned int res_400x300:1; + unsigned int res_640x350:1; + unsigned int res_640x400:1; + unsigned int res_640x480:1; + unsigned int res_704x480:1; + unsigned int res_704x576:1; + + unsigned int res_720x350:1; + unsigned int res_720x400:1; + unsigned int res_720x480:1; + unsigned int res_720x540:1; + unsigned int res_720x576:1; + unsigned int res_768x576:1; + unsigned int res_800x600:1; + unsigned int res_832x624:1; + + unsigned int res_920x766:1; + unsigned int res_1024x768:1; + unsigned int res_1280x1024:1; + unsigned int pad:5; +} __attribute__((packed)); + +/* Get supported resolution with squire pixel aspect ratio that can be + scaled for the requested HDTV format */ +#define SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT 0x85 + +struct intel_sdvo_hdtv_resolution_request { + unsigned int hdtv_std_smpte_240m_1080i_59:1; + unsigned int hdtv_std_smpte_240m_1080i_60:1; + unsigned int hdtv_std_smpte_260m_1080i_59:1; + unsigned int hdtv_std_smpte_260m_1080i_60:1; + unsigned int hdtv_std_smpte_274m_1080i_50:1; + unsigned int hdtv_std_smpte_274m_1080i_59:1; + unsigned int hdtv_std_smpte_274m_1080i_60:1; + unsigned int hdtv_std_smpte_274m_1080p_23:1; + + unsigned int hdtv_std_smpte_274m_1080p_24:1; + unsigned int hdtv_std_smpte_274m_1080p_25:1; + unsigned int hdtv_std_smpte_274m_1080p_29:1; + unsigned int hdtv_std_smpte_274m_1080p_30:1; + unsigned int hdtv_std_smpte_274m_1080p_50:1; + unsigned int hdtv_std_smpte_274m_1080p_59:1; + unsigned int hdtv_std_smpte_274m_1080p_60:1; + unsigned int hdtv_std_smpte_295m_1080i_50:1; + + unsigned int hdtv_std_smpte_295m_1080p_50:1; + unsigned int hdtv_std_smpte_296m_720p_59:1; + unsigned int hdtv_std_smpte_296m_720p_60:1; + unsigned int hdtv_std_smpte_296m_720p_50:1; + unsigned int hdtv_std_smpte_293m_480p_59:1; + unsigned int hdtv_std_smpte_170m_480i_59:1; + unsigned int hdtv_std_iturbt601_576i_50:1; + unsigned int hdtv_std_iturbt601_576p_50:1; + + unsigned int hdtv_std_eia_7702a_480i_60:1; + unsigned int hdtv_std_eia_7702a_480p_60:1; + unsigned int pad:6; +} __attribute__((packed)); + +struct intel_sdvo_hdtv_resolution_reply { + unsigned int res_640x480:1; + unsigned int res_800x600:1; + unsigned int res_1024x768:1; + unsigned int res_1280x960:1; + unsigned int res_1400x1050:1; + unsigned int res_1600x1200:1; + unsigned int res_1920x1440:1; + unsigned int res_2048x1536:1; + + unsigned int res_2560x1920:1; + unsigned int res_3200x2400:1; + unsigned int res_3840x2880:1; + unsigned int pad1:5; + + unsigned int res_848x480:1; + unsigned int res_1064x600:1; + unsigned int res_1280x720:1; + unsigned int res_1360x768:1; + unsigned int res_1704x960:1; + unsigned int res_1864x1050:1; + unsigned int res_1920x1080:1; + unsigned int res_2128x1200:1; + + unsigned int res_2560x1400:1; + unsigned int res_2728x1536:1; + unsigned int res_3408x1920:1; + unsigned int res_4264x2400:1; + unsigned int res_5120x2880:1; + unsigned int pad2:3; + + unsigned int res_768x480:1; + unsigned int res_960x600:1; + unsigned int res_1152x720:1; + unsigned int res_1124x768:1; + unsigned int res_1536x960:1; + unsigned int res_1680x1050:1; + unsigned int res_1728x1080:1; + unsigned int res_1920x1200:1; + + unsigned int res_2304x1440:1; + unsigned int res_2456x1536:1; + unsigned int res_3072x1920:1; + unsigned int res_3840x2400:1; + unsigned int res_4608x2880:1; + unsigned int pad3:3; + + unsigned int res_1280x1024:1; + unsigned int pad4:7; + + unsigned int res_1280x768:1; + unsigned int pad5:7; +} __attribute__((packed)); + +/* Get supported power state returns info for encoder and monitor, rely on + last SetTargetInput and SetTargetOutput calls */ #define SDVO_CMD_GET_SUPPORTED_POWER_STATES 0x2a +/* Get power state returns info for encoder and monitor, rely on last + SetTargetInput and SetTargetOutput calls */ +#define SDVO_CMD_GET_POWER_STATE 0x2b #define SDVO_CMD_GET_ENCODER_POWER_STATE 0x2b #define SDVO_CMD_SET_ENCODER_POWER_STATE 0x2c # define SDVO_ENCODER_STATE_ON (1 << 0) # define SDVO_ENCODER_STATE_STANDBY (1 << 1) # define SDVO_ENCODER_STATE_SUSPEND (1 << 2) # define SDVO_ENCODER_STATE_OFF (1 << 3) +# define SDVO_MONITOR_STATE_ON (1 << 4) +# define SDVO_MONITOR_STATE_STANDBY (1 << 5) +# define SDVO_MONITOR_STATE_SUSPEND (1 << 6) +# define SDVO_MONITOR_STATE_OFF (1 << 7) + +#define SDVO_CMD_GET_MAX_PANEL_POWER_SEQUENCING 0x2d +#define SDVO_CMD_GET_PANEL_POWER_SEQUENCING 0x2e +#define SDVO_CMD_SET_PANEL_POWER_SEQUENCING 0x2f +/** + * The panel power sequencing parameters are in units of milliseconds. + * The high fields are bits 8:9 of the 10-bit values. + */ +struct sdvo_panel_power_sequencing { + u8 t0; + u8 t1; + u8 t2; + u8 t3; + u8 t4; + + unsigned int t0_high:2; + unsigned int t1_high:2; + unsigned int t2_high:2; + unsigned int t3_high:2; + + unsigned int t4_high:2; + unsigned int pad:6; +} __attribute__((packed)); + +#define SDVO_CMD_GET_MAX_BACKLIGHT_LEVEL 0x30 +struct sdvo_max_backlight_reply { + u8 max_value; + u8 default_value; +} __attribute__((packed)); + +#define SDVO_CMD_GET_BACKLIGHT_LEVEL 0x31 +#define SDVO_CMD_SET_BACKLIGHT_LEVEL 0x32 + +#define SDVO_CMD_GET_AMBIENT_LIGHT 0x33 +struct sdvo_get_ambient_light_reply { + u16 trip_low; + u16 trip_high; + u16 value; +} __attribute__((packed)); +#define SDVO_CMD_SET_AMBIENT_LIGHT 0x34 +struct sdvo_set_ambient_light_reply { + u16 trip_low; + u16 trip_high; + unsigned int enable:1; + unsigned int pad:7; +} __attribute__((packed)); + +/* Set display power state */ +#define SDVO_CMD_SET_DISPLAY_POWER_STATE 0x7d +# define SDVO_DISPLAY_STATE_ON (1 << 0) +# define SDVO_DISPLAY_STATE_STANDBY (1 << 1) +# define SDVO_DISPLAY_STATE_SUSPEND (1 << 2) +# define SDVO_DISPLAY_STATE_OFF (1 << 3) + +#define SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS 0x84 +struct intel_sdvo_enhancements_reply { + unsigned int flicker_filter:1; + unsigned int flicker_filter_adaptive:1; + unsigned int flicker_filter_2d:1; + unsigned int saturation:1; + unsigned int hue:1; + unsigned int brightness:1; + unsigned int contrast:1; + unsigned int overscan_h:1; + + unsigned int overscan_v:1; + unsigned int position_h:1; + unsigned int position_v:1; + unsigned int sharpness:1; + unsigned int dot_crawl:1; + unsigned int dither:1; + unsigned int max_tv_chroma_filter:1; + unsigned int max_tv_luma_filter:1; +} __attribute__((packed)); + +/* Picture enhancement limits below are dependent on the current TV format, + * and thus need to be queried and set after it. + */ +#define SDVO_CMD_GET_MAX_FLICKER_FITER 0x4d +#define SDVO_CMD_GET_MAX_ADAPTIVE_FLICKER_FITER 0x7b +#define SDVO_CMD_GET_MAX_2D_FLICKER_FITER 0x52 +#define SDVO_CMD_GET_MAX_SATURATION 0x55 +#define SDVO_CMD_GET_MAX_HUE 0x58 +#define SDVO_CMD_GET_MAX_BRIGHTNESS 0x5b +#define SDVO_CMD_GET_MAX_CONTRAST 0x5e +#define SDVO_CMD_GET_MAX_OVERSCAN_H 0x61 +#define SDVO_CMD_GET_MAX_OVERSCAN_V 0x64 +#define SDVO_CMD_GET_MAX_POSITION_H 0x67 +#define SDVO_CMD_GET_MAX_POSITION_V 0x6a +#define SDVO_CMD_GET_MAX_SHARPNESS_V 0x6d +#define SDVO_CMD_GET_MAX_TV_CHROMA 0x74 +#define SDVO_CMD_GET_MAX_TV_LUMA 0x77 +struct intel_sdvo_enhancement_limits_reply { + u16 max_value; + u16 default_value; +} __attribute__((packed)); -#define SDVO_CMD_SET_TV_RESOLUTION_SUPPORT 0x93 +#define SDVO_CMD_GET_LVDS_PANEL_INFORMATION 0x7f +#define SDVO_CMD_SET_LVDS_PANEL_INFORMATION 0x80 +# define SDVO_LVDS_COLOR_DEPTH_18 (0 << 0) +# define SDVO_LVDS_COLOR_DEPTH_24 (1 << 0) +# define SDVO_LVDS_CONNECTOR_SPWG (0 << 2) +# define SDVO_LVDS_CONNECTOR_OPENLDI (1 << 2) +# define SDVO_LVDS_SINGLE_CHANNEL (0 << 4) +# define SDVO_LVDS_DUAL_CHANNEL (1 << 4) + +#define SDVO_CMD_GET_FLICKER_FILTER 0x4e +#define SDVO_CMD_SET_FLICKER_FILTER 0x4f +#define SDVO_CMD_GET_ADAPTIVE_FLICKER_FITER 0x50 +#define SDVO_CMD_SET_ADAPTIVE_FLICKER_FITER 0x51 +#define SDVO_CMD_GET_2D_FLICKER_FITER 0x53 +#define SDVO_CMD_SET_2D_FLICKER_FITER 0x54 +#define SDVO_CMD_GET_SATURATION 0x56 +#define SDVO_CMD_SET_SATURATION 0x57 +#define SDVO_CMD_GET_HUE 0x59 +#define SDVO_CMD_SET_HUE 0x5a +#define SDVO_CMD_GET_BRIGHTNESS 0x5c +#define SDVO_CMD_SET_BRIGHTNESS 0x5d +#define SDVO_CMD_GET_CONTRAST 0x5f +#define SDVO_CMD_SET_CONTRAST 0x60 +#define SDVO_CMD_GET_OVERSCAN_H 0x62 +#define SDVO_CMD_SET_OVERSCAN_H 0x63 +#define SDVO_CMD_GET_OVERSCAN_V 0x65 +#define SDVO_CMD_SET_OVERSCAN_V 0x66 +#define SDVO_CMD_GET_POSITION_H 0x68 +#define SDVO_CMD_SET_POSITION_H 0x69 +#define SDVO_CMD_GET_POSITION_V 0x6b +#define SDVO_CMD_SET_POSITION_V 0x6c +#define SDVO_CMD_GET_SHARPNESS 0x6e +#define SDVO_CMD_SET_SHARPNESS 0x6f +#define SDVO_CMD_GET_TV_CHROMA 0x75 +#define SDVO_CMD_SET_TV_CHROMA 0x76 +#define SDVO_CMD_GET_TV_LUMA 0x78 +#define SDVO_CMD_SET_TV_LUMA 0x79 +struct intel_sdvo_enhancements_arg { + u16 value; +}__attribute__((packed)); + +#define SDVO_CMD_GET_DOT_CRAWL 0x70 +#define SDVO_CMD_SET_DOT_CRAWL 0x71 +# define SDVO_DOT_CRAWL_ON (1 << 0) +# define SDVO_DOT_CRAWL_DEFAULT_ON (1 << 1) + +#define SDVO_CMD_GET_DITHER 0x72 +#define SDVO_CMD_SET_DITHER 0x73 +# define SDVO_DITHER_ON (1 << 0) +# define SDVO_DITHER_DEFAULT_ON (1 << 1) #define SDVO_CMD_SET_CONTROL_BUS_SWITCH 0x7a -# define SDVO_CONTROL_BUS_PROM 0x0 -# define SDVO_CONTROL_BUS_DDC1 0x1 -# define SDVO_CONTROL_BUS_DDC2 0x2 -# define SDVO_CONTROL_BUS_DDC3 0x3 +# define SDVO_CONTROL_BUS_PROM (1 << 0) +# define SDVO_CONTROL_BUS_DDC1 (1 << 1) +# define SDVO_CONTROL_BUS_DDC2 (1 << 2) +# define SDVO_CONTROL_BUS_DDC3 (1 << 3) + +/* HDMI op codes */ +#define SDVO_CMD_GET_SUPP_ENCODE 0x9d +#define SDVO_CMD_GET_ENCODE 0x9e +#define SDVO_CMD_SET_ENCODE 0x9f + #define SDVO_ENCODE_DVI 0x0 + #define SDVO_ENCODE_HDMI 0x1 +#define SDVO_CMD_SET_PIXEL_REPLI 0x8b +#define SDVO_CMD_GET_PIXEL_REPLI 0x8c +#define SDVO_CMD_GET_COLORIMETRY_CAP 0x8d +#define SDVO_CMD_SET_COLORIMETRY 0x8e + #define SDVO_COLORIMETRY_RGB256 0x0 + #define SDVO_COLORIMETRY_RGB220 0x1 + #define SDVO_COLORIMETRY_YCrCb422 0x3 + #define SDVO_COLORIMETRY_YCrCb444 0x4 +#define SDVO_CMD_GET_COLORIMETRY 0x8f +#define SDVO_CMD_GET_AUDIO_ENCRYPT_PREFER 0x90 +#define SDVO_CMD_SET_AUDIO_STAT 0x91 +#define SDVO_CMD_GET_AUDIO_STAT 0x92 +#define SDVO_CMD_SET_HBUF_INDEX 0x93 +#define SDVO_CMD_GET_HBUF_INDEX 0x94 +#define SDVO_CMD_GET_HBUF_INFO 0x95 +#define SDVO_CMD_SET_HBUF_AV_SPLIT 0x96 +#define SDVO_CMD_GET_HBUF_AV_SPLIT 0x97 +#define SDVO_CMD_SET_HBUF_DATA 0x98 +#define SDVO_CMD_GET_HBUF_DATA 0x99 +#define SDVO_CMD_SET_HBUF_TXRATE 0x9a +#define SDVO_CMD_GET_HBUF_TXRATE 0x9b + #define SDVO_HBUF_TX_DISABLED (0 << 6) + #define SDVO_HBUF_TX_ONCE (2 << 6) + #define SDVO_HBUF_TX_VSYNC (3 << 6) +#define SDVO_CMD_GET_AUDIO_TX_INFO 0x9c + +struct intel_sdvo_encode{ + u8 dvi_rev; + u8 hdmi_rev; +} __attribute__ ((packed)); diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 63212d7bbc28..df4cf97e5d97 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -1039,9 +1039,9 @@ static int radeon_do_init_cp(struct drm_device *dev, drm_radeon_init_t *init, #if __OS_HAS_AGP if (dev_priv->flags & RADEON_IS_AGP) { - drm_core_ioremap(dev_priv->cp_ring, dev); - drm_core_ioremap(dev_priv->ring_rptr, dev); - drm_core_ioremap(dev->agp_buffer_map, dev); + drm_core_ioremap_wc(dev_priv->cp_ring, dev); + drm_core_ioremap_wc(dev_priv->ring_rptr, dev); + drm_core_ioremap_wc(dev->agp_buffer_map, dev); if (!dev_priv->cp_ring->handle || !dev_priv->ring_rptr->handle || !dev->agp_buffer_map->handle) { diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 5d7640e49dc5..6cad69ed21c5 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1218,6 +1218,7 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask) } EXPORT_SYMBOL_GPL(hid_connect); +/* a list of devices for which there is a specialized driver on HID bus */ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) }, @@ -1476,6 +1477,7 @@ static struct bus_type hid_bus_type = { .uevent = hid_uevent, }; +/* a list of devices that shouldn't be handled by HID core at all */ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR) }, { HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302) }, @@ -1606,6 +1608,8 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD4) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5) }, { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) }, { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index acc1abc834a4..e899f510ebeb 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -362,6 +362,8 @@ #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD 0x0038 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2 0x0036 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3 0x0034 +#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD4 0x0044 +#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5 0x0045 #define USB_VENDOR_ID_SUN 0x0430 #define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c index d718b1607d0f..25b10dcad90d 100644 --- a/drivers/hid/hid-microsoft.c +++ b/drivers/hid/hid-microsoft.c @@ -30,7 +30,7 @@ #define MS_NOGET 0x10 /* - * Microsoft Wireless Desktop Receiver (Model 1028) has several + * Microsoft Wireless Desktop Receiver (Model 1028) has * 'Usage Min/Max' where it ought to have 'Physical Min/Max' */ static void ms_report_fixup(struct hid_device *hdev, __u8 *rdesc, @@ -38,17 +38,12 @@ static void ms_report_fixup(struct hid_device *hdev, __u8 *rdesc, { unsigned long quirks = (unsigned long)hid_get_drvdata(hdev); - if ((quirks & MS_RDESC) && rsize == 571 && rdesc[284] == 0x19 && - rdesc[286] == 0x2a && rdesc[304] == 0x19 && - rdesc[306] == 0x29 && rdesc[352] == 0x1a && - rdesc[355] == 0x2a && rdesc[557] == 0x19 && + if ((quirks & MS_RDESC) && rsize == 571 && rdesc[557] == 0x19 && rdesc[559] == 0x29) { dev_info(&hdev->dev, "fixing up Microsoft Wireless Receiver " "Model 1028 report descriptor\n"); - rdesc[284] = rdesc[304] = rdesc[557] = 0x35; - rdesc[352] = 0x36; - rdesc[286] = rdesc[355] = 0x46; - rdesc[306] = rdesc[559] = 0x45; + rdesc[557] = 0x35; + rdesc[559] = 0x45; } } diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index d73eea382ab3..4940e4d70c2d 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -656,7 +656,7 @@ static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case HIDIOCGSTRING: mutex_lock(&hiddev->existancelock); - if (!hiddev->exist) + if (hiddev->exist) r = hiddev_ioctl_string(hiddev, cmd, user_arg); else r = -ENODEV; diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index e30186236588..678e34b01e52 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -83,7 +83,7 @@ /* * Temperature sensors keys (sp78 - 2 bytes). */ -static const char* temperature_sensors_sets[][36] = { +static const char *temperature_sensors_sets[][41] = { /* Set 0: Macbook Pro */ { "TA0P", "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "Th0H", "Th1H", "Tm0P", "Ts0P", "Ts1P", NULL }, @@ -135,6 +135,13 @@ static const char* temperature_sensors_sets[][36] = { { "TB0T", "TB1S", "TB1T", "TB2S", "TB2T", "TC0D", "TN0D", "TTF0", "TV0P", "TVFP", "TW0P", "Th0P", "Tp0P", "Tp1P", "TpFP", "Ts0P", "Ts0S", NULL }, +/* Set 16: Mac Pro 3,1 (2 x Quad-Core) */ + { "TA0P", "TCAG", "TCAH", "TCBG", "TCBH", "TC0C", "TC0D", "TC0P", + "TC1C", "TC1D", "TC2C", "TC2D", "TC3C", "TC3D", "TH0P", "TH1P", + "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S", "TM1P", + "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P", "TM9S", + "TN0C", "TN0D", "TN0H", "TS0C", "Tp0C", "Tp1C", "Tv0S", "Tv1S", + NULL }, }; /* List of keys used to read/write fan speeds */ @@ -1153,6 +1160,16 @@ static SENSOR_DEVICE_ATTR(temp34_input, S_IRUGO, applesmc_show_temperature, NULL, 33); static SENSOR_DEVICE_ATTR(temp35_input, S_IRUGO, applesmc_show_temperature, NULL, 34); +static SENSOR_DEVICE_ATTR(temp36_input, S_IRUGO, + applesmc_show_temperature, NULL, 35); +static SENSOR_DEVICE_ATTR(temp37_input, S_IRUGO, + applesmc_show_temperature, NULL, 36); +static SENSOR_DEVICE_ATTR(temp38_input, S_IRUGO, + applesmc_show_temperature, NULL, 37); +static SENSOR_DEVICE_ATTR(temp39_input, S_IRUGO, + applesmc_show_temperature, NULL, 38); +static SENSOR_DEVICE_ATTR(temp40_input, S_IRUGO, + applesmc_show_temperature, NULL, 39); static struct attribute *temperature_attributes[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, @@ -1190,6 +1207,11 @@ static struct attribute *temperature_attributes[] = { &sensor_dev_attr_temp33_input.dev_attr.attr, &sensor_dev_attr_temp34_input.dev_attr.attr, &sensor_dev_attr_temp35_input.dev_attr.attr, + &sensor_dev_attr_temp36_input.dev_attr.attr, + &sensor_dev_attr_temp37_input.dev_attr.attr, + &sensor_dev_attr_temp38_input.dev_attr.attr, + &sensor_dev_attr_temp39_input.dev_attr.attr, + &sensor_dev_attr_temp40_input.dev_attr.attr, NULL }; @@ -1312,6 +1334,8 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = { { .accelerometer = 0, .light = 0, .temperature_set = 14 }, /* MacBook Air 2,1: accelerometer, backlight and temperature set 15 */ { .accelerometer = 1, .light = 1, .temperature_set = 15 }, +/* MacPro3,1: temperature set 16 */ + { .accelerometer = 0, .light = 0, .temperature_set = 16 }, }; /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1". @@ -1369,6 +1393,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") }, &applesmc_dmi_data[4]}, + { applesmc_dmi_match, "Apple MacPro3", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacPro3") }, + &applesmc_dmi_data[16]}, { applesmc_dmi_match, "Apple MacPro", { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") }, diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c index 03705240000f..abf4dfc8ec22 100644 --- a/drivers/hwmon/hp_accel.c +++ b/drivers/hwmon/hp_accel.c @@ -153,7 +153,10 @@ static struct axis_conversion lis3lv02d_axis_y_inverted = {1, -2, 3}; static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3}; static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3}; static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3}; +static struct axis_conversion lis3lv02d_axis_xy_rotated_left_usd = {-2, 1, -3}; static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3}; +static struct axis_conversion lis3lv02d_axis_xy_rotated_right = {2, -1, 3}; +static struct axis_conversion lis3lv02d_axis_xy_swap_yz_inverted = {2, -1, -3}; #define AXIS_DMI_MATCH(_ident, _name, _axis) { \ .ident = _ident, \ @@ -172,10 +175,12 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = { AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted), AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted), AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left), + AXIS_DMI_MATCH("NC653x", "HP Compaq 653", xy_rotated_left_usd), + AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd), + AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right), + AXIS_DMI_MATCH("NC671xx", "HP Compaq 671", xy_swap_yz_inverted), { NULL, } /* Laptop models without axis info (yet): - * "NC651xx" "HP Compaq 651" - * "NC671xx" "HP Compaq 671" * "NC6910" "HP Compaq 6910" * HP Compaq 8710x Notebook PC / Mobile Workstation * "NC2400" "HP Compaq nc2400" diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index b1c6f68d98ce..3dad2299d9c5 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -465,6 +465,16 @@ config BLK_DEV_CS5535 It is safe to say Y to this question. +config BLK_DEV_CS5536 + tristate "CS5536 chipset support" + depends on X86_32 + select BLK_DEV_IDEDMA_PCI + help + This option enables support for the AMD CS5536 + companion chip used with the Geode LX processor family. + + If unsure, say N. + config BLK_DEV_HPT366 tristate "HPT36X/37X chipset support" select BLK_DEV_IDEDMA_PCI diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index c2b9c93f0095..d0e3d7d5b467 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o obj-$(CONFIG_BLK_DEV_CS5535) += cs5535.o +obj-$(CONFIG_BLK_DEV_CS5536) += cs5536.o obj-$(CONFIG_BLK_DEV_SC1200) += sc1200.o obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o obj-$(CONFIG_BLK_DEV_DELKIN) += delkin_cb.o diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c new file mode 100644 index 000000000000..7a62db719a46 --- /dev/null +++ b/drivers/ide/cs5536.c @@ -0,0 +1,308 @@ +/* + * CS5536 PATA support + * (C) 2007 Martin K. Petersen <mkp@mkp.net> + * (C) 2009 Bartlomiej Zolnierkiewicz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Documentation: + * Available from AMD web site. + * + * The IDE timing registers for the CS5536 live in the Geode Machine + * Specific Register file and not PCI config space. Most BIOSes + * virtualize the PCI registers so the chip looks like a standard IDE + * controller. Unfortunately not all implementations get this right. + * In particular some have problems with unaligned accesses to the + * virtualized PCI registers. This driver always does full dword + * writes to work around the issue. Also, in case of a bad BIOS this + * driver can be loaded with the "msr=1" parameter which forces using + * the Machine Specific Registers to configure the device. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/ide.h> +#include <asm/msr.h> + +#define DRV_NAME "cs5536" + +enum { + MSR_IDE_CFG = 0x51300010, + PCI_IDE_CFG = 0x40, + + CFG = 0, + DTC = 2, + CAST = 3, + ETC = 4, + + IDE_CFG_CHANEN = (1 << 1), + IDE_CFG_CABLE = (1 << 17) | (1 << 16), + + IDE_D0_SHIFT = 24, + IDE_D1_SHIFT = 16, + IDE_DRV_MASK = 0xff, + + IDE_CAST_D0_SHIFT = 6, + IDE_CAST_D1_SHIFT = 4, + IDE_CAST_DRV_MASK = 0x3, + + IDE_CAST_CMD_SHIFT = 24, + IDE_CAST_CMD_MASK = 0xff, + + IDE_ETC_UDMA_MASK = 0xc0, +}; + +static int use_msr; + +static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val) +{ + if (unlikely(use_msr)) { + u32 dummy; + + rdmsr(MSR_IDE_CFG + reg, *val, dummy); + return 0; + } + + return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val); +} + +static int cs5536_write(struct pci_dev *pdev, int reg, int val) +{ + if (unlikely(use_msr)) { + wrmsr(MSR_IDE_CFG + reg, val, 0); + return 0; + } + + return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val); +} + +static void cs5536_program_dtc(ide_drive_t *drive, u8 tim) +{ + struct pci_dev *pdev = to_pci_dev(drive->hwif->dev); + int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT; + u32 dtc; + + cs5536_read(pdev, DTC, &dtc); + dtc &= ~(IDE_DRV_MASK << dshift); + dtc |= tim << dshift; + cs5536_write(pdev, DTC, dtc); +} + +/** + * cs5536_cable_detect - detect cable type + * @hwif: Port to detect on + * + * Perform cable detection for ATA66 capable cable. + * + * Returns a cable type. + */ + +static u8 cs5536_cable_detect(ide_hwif_t *hwif) +{ + struct pci_dev *pdev = to_pci_dev(hwif->dev); + u32 cfg; + + cs5536_read(pdev, CFG, &cfg); + + if (cfg & IDE_CFG_CABLE) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + +/** + * cs5536_set_pio_mode - PIO timing setup + * @drive: ATA device + * @pio: PIO mode number + */ + +static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio) +{ + static const u8 drv_timings[5] = { + 0x98, 0x55, 0x32, 0x21, 0x20, + }; + + static const u8 addr_timings[5] = { + 0x2, 0x1, 0x0, 0x0, 0x0, + }; + + static const u8 cmd_timings[5] = { + 0x99, 0x92, 0x90, 0x22, 0x20, + }; + + struct pci_dev *pdev = to_pci_dev(drive->hwif->dev); + ide_drive_t *pair = ide_get_pair_dev(drive); + int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT; + u32 cast; + u8 cmd_pio = pio; + + if (pair) + cmd_pio = min(pio, ide_get_best_pio_mode(pair, 255, 4)); + + drive->drive_data &= (IDE_DRV_MASK << 8); + drive->drive_data |= drv_timings[pio]; + + cs5536_program_dtc(drive, drv_timings[pio]); + + cs5536_read(pdev, CAST, &cast); + + cast &= ~(IDE_CAST_DRV_MASK << cshift); + cast |= addr_timings[pio] << cshift; + + cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT); + cast |= cmd_timings[cmd_pio] << IDE_CAST_CMD_SHIFT; + + cs5536_write(pdev, CAST, cast); +} + +/** + * cs5536_set_dma_mode - DMA timing setup + * @drive: ATA device + * @mode: DMA mode + */ + +static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode) +{ + static const u8 udma_timings[6] = { + 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6, + }; + + static const u8 mwdma_timings[3] = { + 0x67, 0x21, 0x20, + }; + + struct pci_dev *pdev = to_pci_dev(drive->hwif->dev); + int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT; + u32 etc; + + cs5536_read(pdev, ETC, &etc); + + if (mode >= XFER_UDMA_0) { + etc &= ~(IDE_DRV_MASK << dshift); + etc |= udma_timings[mode - XFER_UDMA_0] << dshift; + } else { /* MWDMA */ + etc &= ~(IDE_ETC_UDMA_MASK << dshift); + drive->drive_data &= IDE_DRV_MASK; + drive->drive_data |= mwdma_timings[mode - XFER_MW_DMA_0] << 8; + } + + cs5536_write(pdev, ETC, etc); +} + +static void cs5536_dma_start(ide_drive_t *drive) +{ + if (drive->current_speed < XFER_UDMA_0 && + (drive->drive_data >> 8) != (drive->drive_data & IDE_DRV_MASK)) + cs5536_program_dtc(drive, drive->drive_data >> 8); + + ide_dma_start(drive); +} + +static int cs5536_dma_end(ide_drive_t *drive) +{ + int ret = ide_dma_end(drive); + + if (drive->current_speed < XFER_UDMA_0 && + (drive->drive_data >> 8) != (drive->drive_data & IDE_DRV_MASK)) + cs5536_program_dtc(drive, drive->drive_data & IDE_DRV_MASK); + + return ret; +} + +static const struct ide_port_ops cs5536_port_ops = { + .set_pio_mode = cs5536_set_pio_mode, + .set_dma_mode = cs5536_set_dma_mode, + .cable_detect = cs5536_cable_detect, +}; + +static const struct ide_dma_ops cs5536_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = cs5536_dma_start, + .dma_end = cs5536_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + +static const struct ide_port_info cs5536_info = { + .name = DRV_NAME, + .port_ops = &cs5536_port_ops, + .dma_ops = &cs5536_dma_ops, + .host_flags = IDE_HFLAG_SINGLE, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, +}; + +/** + * cs5536_init_one + * @dev: PCI device + * @id: Entry in match table + */ + +static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + u32 cfg; + + if (use_msr) + printk(KERN_INFO DRV_NAME ": Using MSR regs instead of PCI\n"); + + cs5536_read(dev, CFG, &cfg); + + if ((cfg & IDE_CFG_CHANEN) == 0) { + printk(KERN_ERR DRV_NAME ": disabled by BIOS\n"); + return -ENODEV; + } + + return ide_pci_init_one(dev, &cs5536_info, NULL); +} + +static const struct pci_device_id cs5536_pci_tbl[] = { + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), }, + { }, +}; + +static struct pci_driver cs5536_pci_driver = { + .name = DRV_NAME, + .id_table = cs5536_pci_tbl, + .probe = cs5536_init_one, + .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, +}; + +static int __init cs5536_init(void) +{ + return pci_register_driver(&cs5536_pci_driver); +} + +static void __exit cs5536_exit(void) +{ + pci_unregister_driver(&cs5536_pci_driver); +} + +MODULE_AUTHOR("Martin K. Petersen, Bartlomiej Zolnierkiewicz"); +MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cs5536_pci_tbl); + +module_param_named(msr, use_msr, int, 0644); +MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)"); + +module_init(cs5536_init); +module_exit(cs5536_exit); diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index 97a35c667aee..415d7e24f2b6 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c @@ -534,7 +534,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) d.dma_ops = NULL; } - ret = ide_host_register(host, NULL, hws); + ret = ide_host_register(host, &d, hws); if (ret) goto err_free; diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index d8f295bdad76..ec7d07fa570a 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -282,7 +282,7 @@ static int do_drive_get_GTF(ide_drive_t *drive, port = hwif->channel ? drive->dn - 2: drive->dn; DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n", - hwif->name, dev->bus_id, port, hwif->channel); + hwif->name, dev_name(dev), port, hwif->channel); if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) { DEBPRINT("%s drive %d:%d not present\n", diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index cae69372cf45..0bfeb0c79d6e 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -787,6 +787,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (blk_fs_request(rq)) { ide_end_request(drive, 1, rq->nr_sectors); return ide_stopped; + } else if (rq->cmd_type == REQ_TYPE_ATA_PC && !rq->bio) { + ide_end_request(drive, 1, 1); + return ide_stopped; } goto end_request; } diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index cc163319dfbd..9ee51adf567f 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -418,11 +418,14 @@ void ide_map_sg(ide_drive_t *drive, struct request *rq) ide_hwif_t *hwif = drive->hwif; struct scatterlist *sg = hwif->sg_table; - if (rq->cmd_type != REQ_TYPE_ATA_TASKFILE) { - hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg); - } else { + if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { sg_init_one(sg, rq->buffer, rq->nr_sectors * SECTOR_SIZE); hwif->sg_nents = 1; + } else if (!rq->bio) { + sg_init_one(sg, rq->data, rq->data_len); + hwif->sg_nents = 1; + } else { + hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg); } } diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 0db1ed9f5fc2..ce0818a993f6 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1467,6 +1467,30 @@ struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws) } EXPORT_SYMBOL_GPL(ide_host_alloc); +static void ide_port_free(ide_hwif_t *hwif) +{ + ide_port_free_devices(hwif); + ide_free_port_slot(hwif->index); + kfree(hwif); +} + +static void ide_disable_port(ide_hwif_t *hwif) +{ + struct ide_host *host = hwif->host; + int i; + + printk(KERN_INFO "%s: disabling port\n", hwif->name); + + for (i = 0; i < MAX_HOST_PORTS; i++) { + if (host->ports[i] == hwif) { + host->ports[i] = NULL; + host->n_ports--; + } + } + + ide_port_free(hwif); +} + int ide_host_register(struct ide_host *host, const struct ide_port_info *d, hw_regs_t **hws) { @@ -1507,8 +1531,12 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, hwif->present = 1; if (hwif->chipset != ide_4drives || !hwif->mate || - !hwif->mate->present) - ide_register_port(hwif); + !hwif->mate->present) { + if (ide_register_port(hwif)) { + ide_disable_port(hwif); + continue; + } + } if (hwif->present) ide_port_tune_devices(hwif); @@ -1521,7 +1549,8 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, if (hwif_init(hwif) == 0) { printk(KERN_INFO "%s: failed to initialize IDE " "interface\n", hwif->name); - hwif->present = 0; + device_unregister(&hwif->gendev); + ide_disable_port(hwif); continue; } @@ -1660,12 +1689,8 @@ void ide_host_free(struct ide_host *host) int i; ide_host_for_each_port(i, hwif, host) { - if (hwif == NULL) - continue; - - ide_port_free_devices(hwif); - ide_free_port_slot(hwif->index); - kfree(hwif); + if (hwif) + ide_port_free(hwif); } kfree(host); diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c index 5b2e3af43c4b..08c4fa35e9b1 100644 --- a/drivers/ide/qd65xx.c +++ b/drivers/ide/qd65xx.c @@ -16,7 +16,7 @@ /* * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by - * Samuel Thibault <samuel.thibault@fnac.net> + * Samuel Thibault <samuel.thibault@ens-lyon.org> */ #include <linux/module.h> diff --git a/drivers/ide/qd65xx.h b/drivers/ide/qd65xx.h index 6636f9665d16..d7e67a1a1dcc 100644 --- a/drivers/ide/qd65xx.h +++ b/drivers/ide/qd65xx.h @@ -4,7 +4,7 @@ /* * Authors: Petr Soucek <petr@ryston.cz> - * Samuel Thibault <samuel.thibault@fnac.net> + * Samuel Thibault <samuel.thibault@ens-lyon.org> */ /* truncates a in [b,c] */ diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c index 882f6f07c476..40b0812a045c 100644 --- a/drivers/ide/tx4939ide.c +++ b/drivers/ide/tx4939ide.c @@ -261,9 +261,9 @@ static int tx4939ide_build_dmatable(ide_drive_t *drive, struct request *rq) bcount = cur_len; /* * This workaround for zero count seems required. - * (standard ide_build_dmatable do it too) + * (standard ide_build_dmatable does it too) */ - if ((bcount & 0xffff) == 0x0000) + if (bcount == 0x10000) bcount = 0x8000; *table++ = bcount & 0xffff; *table++ = cur_addr; diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c index 703c3eeb20a8..6092fe3f409d 100644 --- a/drivers/ide/via82cxxx.c +++ b/drivers/ide/via82cxxx.c @@ -448,6 +448,11 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS; #endif +#ifdef CONFIG_AMIGAONE + if (machine_is(amigaone)) + d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS; +#endif + d.udma_mask = via_config->udma_mask; vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c index a329e6bd5d2d..3838bc4acaba 100644 --- a/drivers/ieee1394/dv1394.c +++ b/drivers/ieee1394/dv1394.c @@ -1823,6 +1823,10 @@ static int dv1394_open(struct inode *inode, struct file *file) #endif + printk(KERN_INFO "%s: NOTE, the dv1394 interface is unsupported " + "and will not be available in the new firewire driver stack. " + "Try libraw1394 based programs instead.\n", current->comm); + return 0; } @@ -2567,10 +2571,6 @@ static int __init dv1394_init_module(void) { int ret; - printk(KERN_WARNING - "NOTE: The dv1394 driver is unsupported and may be removed in a " - "future Linux release. Use raw1394 instead.\n"); - cdev_init(&dv1394_cdev, &dv1394_fops); dv1394_cdev.owner = THIS_MODULE; ret = cdev_add(&dv1394_cdev, IEEE1394_DV1394_DEV, 16); diff --git a/drivers/ieee1394/ieee1394.h b/drivers/ieee1394/ieee1394.h index e0ae0d3d747f..af320e2c5079 100644 --- a/drivers/ieee1394/ieee1394.h +++ b/drivers/ieee1394/ieee1394.h @@ -54,9 +54,7 @@ #define IEEE1394_SPEED_800 0x03 #define IEEE1394_SPEED_1600 0x04 #define IEEE1394_SPEED_3200 0x05 - -/* The current highest tested speed supported by the subsystem */ -#define IEEE1394_SPEED_MAX IEEE1394_SPEED_800 +#define IEEE1394_SPEED_MAX IEEE1394_SPEED_3200 /* Maps speed values above to a string representation */ extern const char *hpsb_speedto_str[]; diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c index dcdb71a7718d..2beb8d94f7bd 100644 --- a/drivers/ieee1394/ieee1394_core.c +++ b/drivers/ieee1394/ieee1394_core.c @@ -338,6 +338,7 @@ static void build_speed_map(struct hpsb_host *host, int nodecount) u8 cldcnt[nodecount]; u8 *map = host->speed_map; u8 *speedcap = host->speed; + u8 local_link_speed = host->csr.lnk_spd; struct selfid *sid; struct ext_selfid *esid; int i, j, n; @@ -373,8 +374,8 @@ static void build_speed_map(struct hpsb_host *host, int nodecount) if (sid->port2 == SELFID_PORT_CHILD) cldcnt[n]++; speedcap[n] = sid->speed; - if (speedcap[n] > host->csr.lnk_spd) - speedcap[n] = host->csr.lnk_spd; + if (speedcap[n] > local_link_speed) + speedcap[n] = local_link_speed; n--; } } @@ -407,12 +408,11 @@ static void build_speed_map(struct hpsb_host *host, int nodecount) } } -#if SELFID_SPEED_UNKNOWN != IEEE1394_SPEED_MAX - /* assume maximum speed for 1394b PHYs, nodemgr will correct it */ - for (n = 0; n < nodecount; n++) - if (speedcap[n] == SELFID_SPEED_UNKNOWN) - speedcap[n] = IEEE1394_SPEED_MAX; -#endif + /* assume a maximum speed for 1394b PHYs, nodemgr will correct it */ + if (local_link_speed > SELFID_SPEED_UNKNOWN) + for (i = 0; i < nodecount; i++) + if (speedcap[i] == SELFID_SPEED_UNKNOWN) + speedcap[i] = local_link_speed; } diff --git a/drivers/ieee1394/ohci1394.h b/drivers/ieee1394/ohci1394.h index 4320bf010495..7fb8ab9780ae 100644 --- a/drivers/ieee1394/ohci1394.h +++ b/drivers/ieee1394/ohci1394.h @@ -26,7 +26,7 @@ #define OHCI1394_DRIVER_NAME "ohci1394" -#define OHCI1394_MAX_AT_REQ_RETRIES 0x2 +#define OHCI1394_MAX_AT_REQ_RETRIES 0xf #define OHCI1394_MAX_AT_RESP_RETRIES 0x2 #define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8 #define OHCI1394_MAX_SELF_ID_ERRORS 16 diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index ab1034ccb7fb..f3fd8657ce4b 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -115,8 +115,8 @@ */ static int sbp2_max_speed = IEEE1394_SPEED_MAX; module_param_named(max_speed, sbp2_max_speed, int, 0644); -MODULE_PARM_DESC(max_speed, "Force max speed " - "(3 = 800Mb/s, 2 = 400Mb/s, 1 = 200Mb/s, 0 = 100Mb/s)"); +MODULE_PARM_DESC(max_speed, "Limit data transfer speed (5 <= 3200, " + "4 <= 1600, 3 <= 800, 2 <= 400, 1 <= 200, 0 = 100 Mb/s)"); /* * Set serialize_io to 0 or N to use dynamically appended lists of command ORBs. @@ -256,7 +256,7 @@ static int sbp2_set_busy_timeout(struct sbp2_lu *); static int sbp2_max_speed_and_size(struct sbp2_lu *); -static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xA, 0xB, 0xC }; +static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xa, 0xa, 0xa }; static DEFINE_RWLOCK(sbp2_hi_logical_units_lock); @@ -347,8 +347,8 @@ static struct scsi_host_template sbp2_shost_template = { .sdev_attrs = sbp2_sysfs_sdev_attrs, }; -/* for match-all entries in sbp2_workarounds_table */ -#define SBP2_ROM_VALUE_WILDCARD 0x1000000 +#define SBP2_ROM_VALUE_WILDCARD ~0 /* match all */ +#define SBP2_ROM_VALUE_MISSING 0xff000000 /* not present in the unit dir. */ /* * List of devices with known bugs. @@ -359,60 +359,70 @@ static struct scsi_host_template sbp2_shost_template = { */ static const struct { u32 firmware_revision; - u32 model_id; + u32 model; unsigned workarounds; } sbp2_workarounds_table[] = { /* DViCO Momobay CX-1 with TSB42AA9 bridge */ { .firmware_revision = 0x002800, - .model_id = 0x001010, + .model = 0x001010, .workarounds = SBP2_WORKAROUND_INQUIRY_36 | SBP2_WORKAROUND_MODE_SENSE_8 | SBP2_WORKAROUND_POWER_CONDITION, }, /* DViCO Momobay FX-3A with TSB42AA9A bridge */ { .firmware_revision = 0x002800, - .model_id = 0x000000, + .model = 0x000000, .workarounds = SBP2_WORKAROUND_DELAY_INQUIRY | SBP2_WORKAROUND_POWER_CONDITION, }, /* Initio bridges, actually only needed for some older ones */ { .firmware_revision = 0x000200, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_INQUIRY_36, }, /* PL-3507 bridge with Prolific firmware */ { .firmware_revision = 0x012800, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_POWER_CONDITION, }, /* Symbios bridge */ { .firmware_revision = 0xa0b800, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ { .firmware_revision = 0x002600, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, + /* + * iPod 2nd generation: needs 128k max transfer size workaround + * iPod 3rd generation: needs fix capacity workaround + */ + { + .firmware_revision = 0x0a2700, + .model = 0x000000, + .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS | + SBP2_WORKAROUND_FIX_CAPACITY, + }, /* iPod 4th generation */ { .firmware_revision = 0x0a2700, - .model_id = 0x000021, + .model = 0x000021, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, /* iPod mini */ { .firmware_revision = 0x0a2700, - .model_id = 0x000022, + .model = 0x000022, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, /* iPod mini */ { .firmware_revision = 0x0a2700, - .model_id = 0x000023, + .model = 0x000023, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, /* iPod Photo */ { .firmware_revision = 0x0a2700, - .model_id = 0x00007e, + .model = 0x00007e, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, } }; @@ -1341,13 +1351,15 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu, struct csr1212_keyval *kv; struct csr1212_dentry *dentry; u64 management_agent_addr; - u32 unit_characteristics, firmware_revision; + u32 unit_characteristics, firmware_revision, model; unsigned workarounds; int i; management_agent_addr = 0; unit_characteristics = 0; - firmware_revision = 0; + firmware_revision = SBP2_ROM_VALUE_MISSING; + model = ud->flags & UNIT_DIRECTORY_MODEL_ID ? + ud->model_id : SBP2_ROM_VALUE_MISSING; csr1212_for_each_dir_entry(ud->ne->csr, kv, ud->ud_kv, dentry) { switch (kv->key.id) { @@ -1388,9 +1400,9 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu, sbp2_workarounds_table[i].firmware_revision != (firmware_revision & 0xffff00)) continue; - if (sbp2_workarounds_table[i].model_id != + if (sbp2_workarounds_table[i].model != SBP2_ROM_VALUE_WILDCARD && - sbp2_workarounds_table[i].model_id != ud->model_id) + sbp2_workarounds_table[i].model != model) continue; workarounds |= sbp2_workarounds_table[i].workarounds; break; @@ -1403,7 +1415,7 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu, NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid), workarounds, firmware_revision, ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id, - ud->model_id); + model); /* We would need one SCSI host template for each target to adjust * max_sectors on the fly, therefore warn only. */ diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 35561689ff38..ea2638b41982 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -13,11 +13,11 @@ menuconfig INPUT_KEYBOARD if INPUT_KEYBOARD config KEYBOARD_ATKBD - tristate "AT keyboard" if EMBEDDED || !X86_PC + tristate "AT keyboard" if EMBEDDED || !X86 default y select SERIO select SERIO_LIBPS2 - select SERIO_I8042 if X86_PC + select SERIO_I8042 if X86 select SERIO_GSCPS2 if GSC help Say Y here if you want to use a standard AT or PS/2 keyboard. Usually diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 093c8c1bca74..9bef935ef19f 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -17,7 +17,7 @@ config MOUSE_PS2 default y select SERIO select SERIO_LIBPS2 - select SERIO_I8042 if X86_PC + select SERIO_I8042 if X86 select SERIO_GSCPS2 if GSC help Say Y here if you have a PS/2 mouse connected to your system. This diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index 595ba8eb4a07..0b28141e43bf 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -4599,6 +4599,7 @@ init_e1_port(struct hfc_multi *hc, struct hm_map *m) printk(KERN_ERR "%s: no memory for coeffs\n", __func__); ret = -ENOMEM; + kfree(bch); goto free_chan; } bch->nr = ch; @@ -4767,6 +4768,7 @@ init_multi_port(struct hfc_multi *hc, int pt) printk(KERN_ERR "%s: no memory for coeffs\n", __func__); ret = -ENOMEM; + kfree(bch); goto free_chan; } bch->nr = ch + 1; diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c index 90663e01a56e..60156dfdc608 100644 --- a/drivers/lguest/core.c +++ b/drivers/lguest/core.c @@ -224,7 +224,7 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user) break; /* If the Guest asked to be stopped, we sleep. The Guest's - * clock timer or LHCALL_BREAK from the Waker will wake us. */ + * clock timer or LHREQ_BREAK from the Waker will wake us. */ if (cpu->halted) { set_current_state(TASK_INTERRUPTIBLE); schedule(); diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c index 34bc017b8b3c..b8ee103eed5f 100644 --- a/drivers/lguest/lguest_user.c +++ b/drivers/lguest/lguest_user.c @@ -307,9 +307,8 @@ static int close(struct inode *inode, struct file *file) * kmalloc()ed string, either of which is ok to hand to kfree(). */ if (!IS_ERR(lg->dead)) kfree(lg->dead); - /* We clear the entire structure, which also marks it as free for the - * next user. */ - memset(lg, 0, sizeof(*lg)); + /* Free the memory allocated to the lguest_struct */ + kfree(lg); /* Release lock and exit. */ mutex_unlock(&lguest_lock); diff --git a/drivers/md/linear.c b/drivers/md/linear.c index 1e3aea9eecf1..09658b218474 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -25,13 +25,13 @@ static inline dev_info_t *which_dev(mddev_t *mddev, sector_t sector) { dev_info_t *hash; linear_conf_t *conf = mddev_to_conf(mddev); + sector_t idx = sector >> conf->sector_shift; /* * sector_div(a,b) returns the remainer and sets a to a/b */ - sector >>= conf->sector_shift; - (void)sector_div(sector, conf->spacing); - hash = conf->hash_table[sector]; + (void)sector_div(idx, conf->spacing); + hash = conf->hash_table[idx]; while (sector >= hash->num_sectors + hash->start_sector) hash++; diff --git a/drivers/md/md.c b/drivers/md/md.c index 41e2509bf896..4495104f6c9f 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1481,6 +1481,11 @@ static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev) if (find_rdev_nr(mddev, rdev->desc_nr)) return -EBUSY; } + if (mddev->max_disks && rdev->desc_nr >= mddev->max_disks) { + printk(KERN_WARNING "md: %s: array is limited to %d devices\n", + mdname(mddev), mddev->max_disks); + return -EBUSY; + } bdevname(rdev->bdev,b); while ( (s=strchr(b, '/')) != NULL) *s = '!'; @@ -2441,6 +2446,15 @@ static void analyze_sbs(mddev_t * mddev) i = 0; rdev_for_each(rdev, tmp, mddev) { + if (rdev->desc_nr >= mddev->max_disks || + i > mddev->max_disks) { + printk(KERN_WARNING + "md: %s: %s: only %d devices permitted\n", + mdname(mddev), bdevname(rdev->bdev, b), + mddev->max_disks); + kick_rdev_from_array(rdev); + continue; + } if (rdev != freshest) if (super_types[mddev->major_version]. validate_super(mddev, rdev)) { @@ -4614,13 +4628,6 @@ static int hot_add_disk(mddev_t * mddev, dev_t dev) * noticed in interrupt contexts ... */ - if (rdev->desc_nr == mddev->max_disks) { - printk(KERN_WARNING "%s: can not hot-add to full array!\n", - mdname(mddev)); - err = -EBUSY; - goto abort_unbind_export; - } - rdev->raid_disk = -1; md_update_sb(mddev, 1); @@ -4634,9 +4641,6 @@ static int hot_add_disk(mddev_t * mddev, dev_t dev) md_new_event(mddev); return 0; -abort_unbind_export: - unbind_rdev_from_array(rdev); - abort_export: export_rdev(rdev); return err; diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 7b4f5f7155d8..01e3cffd03b8 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1640,7 +1640,8 @@ static void raid1d(mddev_t *mddev) } bio = r1_bio->bios[r1_bio->read_disk]; - if ((disk=read_balance(conf, r1_bio)) == -1) { + if ((disk=read_balance(conf, r1_bio)) == -1 || + disk == r1_bio->read_disk) { printk(KERN_ALERT "raid1: %s: unrecoverable I/O" " read error for block %llu\n", bdevname(bio->bi_bdev,b), diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c index 6098b626811f..47fee05eaefb 100644 --- a/drivers/media/common/saa7146_video.c +++ b/drivers/media/common/saa7146_video.c @@ -576,6 +576,7 @@ static int set_control(struct saa7146_fh *fh, struct v4l2_control *c) vv->vflip = c->value; break; default: { + mutex_unlock(&dev->lock); return -EINVAL; } } diff --git a/drivers/media/common/tuners/mxl5007t.c b/drivers/media/common/tuners/mxl5007t.c index 64379f2bf237..3ec28945c26f 100644 --- a/drivers/media/common/tuners/mxl5007t.c +++ b/drivers/media/common/tuners/mxl5007t.c @@ -657,7 +657,7 @@ static int mxl5007t_get_status(struct dvb_frontend *fe, u32 *status) { struct mxl5007t_state *state = fe->tuner_priv; int rf_locked, ref_locked; - s32 rf_input_level; + s32 rf_input_level = 0; int ret; if (fe->ops.i2c_gate_ctrl) diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c index 98ee16773ff2..7e3aeaa7370f 100644 --- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c +++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c @@ -93,6 +93,9 @@ struct dvb_ca_slot { /* current state of the CAM */ int slot_state; + /* mutex used for serializing access to one CI slot */ + struct mutex slot_lock; + /* Number of CAMCHANGES that have occurred since last processing */ atomic_t camchange_count; @@ -711,14 +714,20 @@ static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * b dprintk("%s\n", __func__); - // sanity check + /* sanity check */ if (bytes_write > ca->slot_info[slot].link_buf_size) return -EINVAL; - /* check if interface is actually waiting for us to read from it, or if a read is in progress */ + /* it is possible we are dealing with a single buffer implementation, + thus if there is data available for read or if there is even a read + already in progress, we do nothing but awake the kernel thread to + process the data if necessary. */ if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) goto exitnowrite; if (status & (STATUSREG_DA | STATUSREG_RE)) { + if (status & STATUSREG_DA) + dvb_ca_en50221_thread_wakeup(ca); + status = -EAGAIN; goto exitnowrite; } @@ -987,6 +996,8 @@ static int dvb_ca_en50221_thread(void *data) /* go through all the slots processing them */ for (slot = 0; slot < ca->slot_count; slot++) { + mutex_lock(&ca->slot_info[slot].slot_lock); + // check the cam status + deal with CAMCHANGEs while (dvb_ca_en50221_check_camstatus(ca, slot)) { /* clear down an old CI slot if necessary */ @@ -1122,7 +1133,7 @@ static int dvb_ca_en50221_thread(void *data) case DVB_CA_SLOTSTATE_RUNNING: if (!ca->open) - continue; + break; // poll slots for data pktcount = 0; @@ -1146,6 +1157,8 @@ static int dvb_ca_en50221_thread(void *data) } break; } + + mutex_unlock(&ca->slot_info[slot].slot_lock); } } @@ -1181,6 +1194,7 @@ static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file, switch (cmd) { case CA_RESET: for (slot = 0; slot < ca->slot_count; slot++) { + mutex_lock(&ca->slot_info[slot].slot_lock); if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE) { dvb_ca_en50221_slot_shutdown(ca, slot); if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE) @@ -1188,6 +1202,7 @@ static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file, slot, DVB_CA_EN50221_CAMCHANGE_INSERTED); } + mutex_unlock(&ca->slot_info[slot].slot_lock); } ca->next_read_slot = 0; dvb_ca_en50221_thread_wakeup(ca); @@ -1308,7 +1323,9 @@ static ssize_t dvb_ca_en50221_io_write(struct file *file, goto exit; } + mutex_lock(&ca->slot_info[slot].slot_lock); status = dvb_ca_en50221_write_data(ca, slot, fragbuf, fraglen + 2); + mutex_unlock(&ca->slot_info[slot].slot_lock); if (status == (fraglen + 2)) { written = 1; break; @@ -1664,6 +1681,7 @@ int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter, ca->slot_info[i].slot_state = DVB_CA_SLOTSTATE_NONE; atomic_set(&ca->slot_info[i].camchange_count, 0); ca->slot_info[i].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED; + mutex_init(&ca->slot_info[i].slot_lock); } if (signal_pending(current)) { diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.h b/drivers/media/dvb/dvb-core/dvb_ca_en50221.h index 8467e63ddc0d..7df2e141187a 100644 --- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.h +++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.h @@ -45,8 +45,10 @@ struct dvb_ca_en50221 { /* the module owning this structure */ struct module* owner; - /* NOTE: the read_*, write_* and poll_slot_status functions must use locks as - * they may be called from several threads at once */ + /* NOTE: the read_*, write_* and poll_slot_status functions will be + * called for different slots concurrently and need to use locks where + * and if appropriate. There will be no concurrent access to one slot. + */ /* functions for accessing attribute memory on the CAM */ int (*read_attribute_mem)(struct dvb_ca_en50221* ca, int slot, int address); diff --git a/drivers/media/dvb/dvb-usb/af9005-fe.c b/drivers/media/dvb/dvb-usb/af9005-fe.c index b1a9c4cdec93..199ece0d4883 100644 --- a/drivers/media/dvb/dvb-usb/af9005-fe.c +++ b/drivers/media/dvb/dvb-usb/af9005-fe.c @@ -220,7 +220,7 @@ static int af9005_get_post_vit_ber(struct dvb_frontend *fe, u16 * abort_count) { u32 loc_cw_count = 0, loc_err_count; - u16 loc_abort_count; + u16 loc_abort_count = 0; int ret; ret = diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index e1e9aa5c6b84..6a97a40d3dfb 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -694,7 +694,12 @@ static int af9015_read_config(struct usb_device *udev) /* IR remote controller */ req.addr = AF9015_EEPROM_IR_MODE; - ret = af9015_rw_udev(udev, &req); + /* first message will timeout often due to possible hw bug */ + for (i = 0; i < 4; i++) { + ret = af9015_rw_udev(udev, &req); + if (!ret) + break; + } if (ret) goto error; deb_info("%s: IR mode:%d\n", __func__, val); @@ -835,18 +840,19 @@ static int af9015_read_config(struct usb_device *udev) if (!dvb_usb_af9015_dual_mode) af9015_config.dual_mode = 0; - /* set buffer size according to USB port speed */ + /* Set adapter0 buffer size according to USB port speed, adapter1 buffer + size can be static because it is enabled only USB2.0 */ for (i = 0; i < af9015_properties_count; i++) { /* USB1.1 set smaller buffersize and disable 2nd adapter */ if (udev->speed == USB_SPEED_FULL) { - af9015_properties[i].adapter->stream.u.bulk.buffersize = - TS_USB11_MAX_PACKET_SIZE; + af9015_properties[i].adapter[0].stream.u.bulk.buffersize + = TS_USB11_MAX_PACKET_SIZE; /* disable 2nd adapter because we don't have PID-filters */ af9015_config.dual_mode = 0; } else { - af9015_properties[i].adapter->stream.u.bulk.buffersize = - TS_USB20_MAX_PACKET_SIZE; + af9015_properties[i].adapter[0].stream.u.bulk.buffersize + = TS_USB20_MAX_PACKET_SIZE; } } @@ -1254,6 +1260,12 @@ static struct dvb_usb_device_properties af9015_properties[] = { .type = USB_BULK, .count = 6, .endpoint = 0x85, + .u = { + .bulk = { + .buffersize = + TS_USB20_MAX_PACKET_SIZE, + } + } }, } }, @@ -1353,6 +1365,12 @@ static struct dvb_usb_device_properties af9015_properties[] = { .type = USB_BULK, .count = 6, .endpoint = 0x85, + .u = { + .bulk = { + .buffersize = + TS_USB20_MAX_PACKET_SIZE, + } + } }, } }, diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 391732788911..635d30a55078 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1393,6 +1393,9 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) }, /* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) }, { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) }, + { USB_DEVICE(USB_VID_TERRATEC, + USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1537,7 +1540,8 @@ struct dvb_usb_device_properties dib0700_devices[] = { { "DiBcom STK7700D reference design", { &dib0700_usb_id_table[14], NULL }, { NULL }, - } + }, + }, .rc_interval = DEFAULT_RC_INTERVAL, @@ -1557,7 +1561,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 2, + .num_device_descs = 3, .devices = { { "ASUS My Cinema U3000 Mini DVBT Tuner", { &dib0700_usb_id_table[23], NULL }, @@ -1566,6 +1570,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { "Yuan EC372S", { &dib0700_usb_id_table[31], NULL }, { NULL }, + }, + { "Terratec Cinergy T Express", + { &dib0700_usb_id_table[42], NULL }, + { NULL }, } }, @@ -1653,7 +1661,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { } }, - .num_device_descs = 4, + .num_device_descs = 5, .devices = { { "DiBcom STK7070PD reference design", { &dib0700_usb_id_table[17], NULL }, @@ -1670,6 +1678,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { "Hauppauge Nova-TD-500 (84xxx)", { &dib0700_usb_id_table[36], NULL }, { NULL }, + }, + { "Terratec Cinergy DT USB XS Diversity", + { &dib0700_usb_id_table[43], NULL }, + { NULL }, } } }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index a4fca3fca5ee..0db0c06ee6f2 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -162,8 +162,10 @@ #define USB_PID_AVERMEDIA_A309 0xa309 #define USB_PID_TECHNOTREND_CONNECT_S2400 0x3006 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a +#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2 0x0081 #define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058 #define USB_PID_TERRATEC_CINERGY_HT_EXPRESS 0x0060 +#define USB_PID_TERRATEC_CINERGY_T_EXPRESS 0x0062 #define USB_PID_TERRATEC_CINERGY_T_XXS 0x0078 #define USB_PID_PINNACLE_EXPRESSCARD_320CX 0x022e #define USB_PID_PINNACLE_PCTV2000E 0x022c diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c index ec4e08dbc699..1e81e713df63 100644 --- a/drivers/media/dvb/frontends/drx397xD.c +++ b/drivers/media/dvb/frontends/drx397xD.c @@ -646,7 +646,7 @@ static int drx_tune(struct drx397xD_state *s, u32 edi = 0, ebx = 0, ebp = 0, edx = 0; u16 v20 = 0, v1E = 0, v16 = 0, v14 = 0, v12 = 0, v10 = 0, v0E = 0; - int rc, df_tuner; + int rc, df_tuner = 0; int a, b, c, d; pr_debug("%s %d\n", __func__, s->config.d60); diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c index cf4d8936bb83..3e08d985d6e5 100644 --- a/drivers/media/dvb/frontends/s5h1409.c +++ b/drivers/media/dvb/frontends/s5h1409.c @@ -545,9 +545,6 @@ static int s5h1409_set_frontend(struct dvb_frontend *fe, s5h1409_enable_modulation(fe, p->u.vsb.modulation); - /* Allow the demod to settle */ - msleep(100); - if (fe->ops.tuner_ops.set_params) { if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); @@ -562,6 +559,10 @@ static int s5h1409_set_frontend(struct dvb_frontend *fe, s5h1409_set_qam_interleave_mode(fe); } + /* Issue a reset to the demod so it knows to resync against the + newly tuned frequency */ + s5h1409_softreset(fe); + return 0; } diff --git a/drivers/media/dvb/frontends/stb0899_algo.c b/drivers/media/dvb/frontends/stb0899_algo.c index 83dc7e12d5f0..a67d1775a43c 100644 --- a/drivers/media/dvb/frontends/stb0899_algo.c +++ b/drivers/media/dvb/frontends/stb0899_algo.c @@ -31,6 +31,8 @@ inline u32 stb0899_do_div(u64 n, u32 d) return n; } +#if 0 +/* These functions are currently unused */ /* * stb0899_calc_srate * Compute symbol rate @@ -63,6 +65,7 @@ static u32 stb0899_get_srate(struct stb0899_state *state) return stb0899_calc_srate(internal->master_clk, sfr); } +#endif /* * stb0899_set_srate diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index 1638e1d9f538..83e9e7750c8c 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -470,6 +470,7 @@ static void frontend_init(struct budget *budget) budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config, &budget->i2c_adap); if (budget->dvb_frontend) { budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params; + budget->dvb_frontend->tuner_priv = NULL; break; } break; diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index 0aa96df80fc2..d91e0638448f 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -1384,7 +1384,7 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) static int ttusb_dec_init_stb(struct ttusb_dec *dec) { int result; - unsigned int mode, model, version; + unsigned int mode = 0, model = 0, version = 0; dprintk("%s\n", __func__); diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c index 0747dc8862b0..fdfc7bf86b9e 100644 --- a/drivers/media/radio/radio-mr800.c +++ b/drivers/media/radio/radio-mr800.c @@ -194,10 +194,10 @@ static int amradio_start(struct amradio_device *radio) return retval; } - mutex_unlock(&radio->lock); - radio->muted = 0; + mutex_unlock(&radio->lock); + return retval; } @@ -230,10 +230,10 @@ static int amradio_stop(struct amradio_device *radio) return retval; } - mutex_unlock(&radio->lock); - radio->muted = 1; + mutex_unlock(&radio->lock); + return retval; } @@ -284,10 +284,10 @@ static int amradio_setfreq(struct amradio_device *radio, int freq) return retval; } - mutex_unlock(&radio->lock); - radio->stereo = 0; + mutex_unlock(&radio->lock); + return retval; } diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c index 14bebf8a116f..87e91072627a 100644 --- a/drivers/media/video/cs5345.c +++ b/drivers/media/video/cs5345.c @@ -18,7 +18,6 @@ */ -#include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/i2c.h> diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index 8f1db57bd1dd..bfe25841dbf4 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -1586,7 +1586,8 @@ static int mpeg_open(struct file *file) lock_kernel(); list_for_each(list, &cx23885_devlist) { h = list_entry(list, struct cx23885_dev, devlist); - if (h->v4l_device->minor == minor) { + if (h->v4l_device && + h->v4l_device->minor == minor) { dev = h; break; } diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index 2d81c4d04340..eaa11893bfe9 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -730,12 +730,13 @@ static int video_open(struct file *file) lock_kernel(); list_for_each(list, &cx23885_devlist) { h = list_entry(list, struct cx23885_dev, devlist); - if (h->video_dev->minor == minor) { + if (h->video_dev && + h->video_dev->minor == minor) { dev = h; type = V4L2_BUF_TYPE_VIDEO_CAPTURE; } if (h->vbi_dev && - h->vbi_dev->minor == minor) { + h->vbi_dev->minor == minor) { dev = h; type = V4L2_BUF_TYPE_VBI_CAPTURE; } diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 88f2fd32bfe3..25eb3bec9e5d 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -1382,6 +1382,14 @@ static int cx25840_log_status(struct v4l2_subdev *sd) static int cx25840_command(struct i2c_client *client, unsigned cmd, void *arg) { + /* ignore this command */ + if (cmd == TUNER_SET_TYPE_ADDR || cmd == TUNER_SET_CONFIG) + return 0; + + /* Old-style drivers rely on initialization on first use, so + call the init whenever a command is issued to this driver. + New-style drivers using v4l2_subdev should call init explicitly. */ + cx25840_init(i2c_get_clientdata(client), 0); return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg); } diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 613dfea4ff3e..aef5297534af 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -614,34 +614,41 @@ static struct stv0288_config tevii_tuner_earda_config = { .set_ts_params = cx24116_set_ts_param, }; -static int dvb_register(struct cx8802_dev *dev) +static int cx8802_alloc_frontends(struct cx8802_dev *dev) { struct cx88_core *core = dev->core; - struct videobuf_dvb_frontend *fe0, *fe1 = NULL; - int mfe_shared = 0; /* bus not shared by default */ + struct videobuf_dvb_frontend *fe = NULL; int i; - if (0 != core->i2c_rc) { - printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name); - goto frontend_detach; - } - - if (!core->board.num_frontends) - return -EINVAL; - mutex_init(&dev->frontends.lock); INIT_LIST_HEAD(&dev->frontends.felist); + if (!core->board.num_frontends) + return -ENODEV; + printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, core->board.num_frontends); for (i = 1; i <= core->board.num_frontends; i++) { - fe0 = videobuf_dvb_alloc_frontend(&dev->frontends, i); - if (!fe0) { + fe = videobuf_dvb_alloc_frontend(&dev->frontends, i); + if (!fe) { printk(KERN_ERR "%s() failed to alloc\n", __func__); videobuf_dvb_dealloc_frontends(&dev->frontends); - goto frontend_detach; + return -ENOMEM; } } + return 0; +} + +static int dvb_register(struct cx8802_dev *dev) +{ + struct cx88_core *core = dev->core; + struct videobuf_dvb_frontend *fe0, *fe1 = NULL; + int mfe_shared = 0; /* bus not shared by default */ + + if (0 != core->i2c_rc) { + printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name); + goto frontend_detach; + } /* Get the first frontend */ fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); @@ -1243,6 +1250,8 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv) struct cx88_core *core = drv->core; struct cx8802_dev *dev = drv->core->dvbdev; int err; + struct videobuf_dvb_frontend *fe; + int i; dprintk( 1, "%s\n", __func__); dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n", @@ -1258,39 +1267,34 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv) /* If vp3054 isn't enabled, a stub will just return 0 */ err = vp3054_i2c_probe(dev); if (0 != err) - goto fail_probe; + goto fail_core; /* dvb stuff */ printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name); dev->ts_gen_cntrl = 0x0c; + err = cx8802_alloc_frontends(dev); + if (err) + goto fail_core; + err = -ENODEV; - if (core->board.num_frontends) { - struct videobuf_dvb_frontend *fe; - int i; - - for (i = 1; i <= core->board.num_frontends; i++) { - fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i); - if (fe == NULL) { - printk(KERN_ERR "%s() failed to get frontend(%d)\n", + for (i = 1; i <= core->board.num_frontends; i++) { + fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i); + if (fe == NULL) { + printk(KERN_ERR "%s() failed to get frontend(%d)\n", __func__, i); - goto fail_probe; - } - videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops, + goto fail_probe; + } + videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops, &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP, sizeof(struct cx88_buffer), dev); - /* init struct videobuf_dvb */ - fe->dvb.name = dev->core->name; - } - } else { - /* no frontends allocated */ - printk(KERN_ERR "%s/2 .num_frontends should be non-zero\n", - core->name); - goto fail_core; + /* init struct videobuf_dvb */ + fe->dvb.name = dev->core->name; } + err = dvb_register(dev); if (err) /* frontends/adapter de-allocated in dvb_register */ diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 60a8b3187f14..6025fdd23344 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -336,8 +336,8 @@ struct cx88_core { /* config info -- dvb */ #if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE) int (*prev_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage); - void (*gate_ctrl)(struct cx88_core *core, int open); #endif + void (*gate_ctrl)(struct cx88_core *core, int open); /* state info */ struct task_struct *kthread; diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 94378ccb7505..5d882a44e3ee 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -62,9 +62,15 @@ static int em28xx_isoc_audio_deinit(struct em28xx *dev) dprintk("Stopping isoc\n"); for (i = 0; i < EM28XX_AUDIO_BUFS; i++) { - usb_unlink_urb(dev->adev.urb[i]); + if (!irqs_disabled()) + usb_kill_urb(dev->adev.urb[i]); + else + usb_unlink_urb(dev->adev.urb[i]); usb_free_urb(dev->adev.urb[i]); dev->adev.urb[i] = NULL; + + kfree(dev->adev.transfer_buffer[i]); + dev->adev.transfer_buffer[i] = NULL; } return 0; @@ -389,11 +395,15 @@ static int snd_em28xx_capture_trigger(struct snd_pcm_substream *substream, static snd_pcm_uframes_t snd_em28xx_capture_pointer(struct snd_pcm_substream *substream) { - struct em28xx *dev; + unsigned long flags; + struct em28xx *dev; snd_pcm_uframes_t hwptr_done; + dev = snd_pcm_substream_chip(substream); + spin_lock_irqsave(&dev->adev.slock, flags); hwptr_done = dev->adev.hwptr_done_capture; + spin_unlock_irqrestore(&dev->adev.slock, flags); return hwptr_done; } diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index ef9bf008a924..3b3ca3f46d52 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -102,6 +102,18 @@ static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { /* Board - EM2870 Kworld 355u Analog - No input analog */ +static struct em28xx_reg_seq kworld_330u_analog[] = { + {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x00, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq kworld_330u_digital[] = { + {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x08, 0xff, 10}, + { -1, -1, -1, -1}, +}; + /* Callback for the most boards */ static struct em28xx_reg_seq default_tuner_gpio[] = { {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, @@ -1177,29 +1189,33 @@ struct em28xx_board em28xx_boards[] = { .gpio = hauppauge_wintv_hvr_900_analog, } }, }, - [EM2883_BOARD_KWORLD_HYBRID_A316] = { + [EM2883_BOARD_KWORLD_HYBRID_330U] = { .name = "Kworld PlusTV HD Hybrid 330", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .mts_firmware = 1, .has_dvb = 1, - .dvb_gpio = default_digital, + .dvb_gpio = kworld_330u_digital, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_EEPROM_ON_BOARD | EM28XX_I2C_EEPROM_KEY_VALID, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, - .gpio = default_analog, + .gpio = kworld_330u_analog, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, - .gpio = hauppauge_wintv_hvr_900_analog, + .gpio = kworld_330u_analog, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, - .gpio = hauppauge_wintv_hvr_900_analog, + .gpio = kworld_330u_analog, } }, }, [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { @@ -1249,7 +1265,7 @@ struct usb_device_id em28xx_id_table [] = { { USB_DEVICE(0xeb1a, 0xe310), .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, { USB_DEVICE(0xeb1a, 0xa316), - .driver_info = EM2883_BOARD_KWORLD_HYBRID_A316 }, + .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, { USB_DEVICE(0xeb1a, 0xe320), .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, { USB_DEVICE(0xeb1a, 0xe323), @@ -1526,6 +1542,10 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) /* FIXME: Better to specify the needed IF */ ctl->demod = XC3028_FE_DEFAULT; break; + case EM2883_BOARD_KWORLD_HYBRID_330U: + ctl->demod = XC3028_FE_CHINA; + ctl->fname = XC2028_DEFAULT_FIRMWARE; + break; default: ctl->demod = XC3028_FE_OREN538; } diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index eb5fb05fab22..94fb1b639a2e 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -438,6 +438,10 @@ int em28xx_audio_analog_set(struct em28xx *dev) if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { int vol; + em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200); + em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031); + em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80); + /* LSB: left channel - both channels with the same level */ vol = (0x1f - dev->volume) | ((0x1f - dev->volume) << 8); @@ -454,6 +458,15 @@ int em28xx_audio_analog_set(struct em28xx *dev) em28xx_warn("couldn't setup AC97 register %d\n", outputs[i].reg); } + + if (dev->ctl_aoutput & EM28XX_AOUT_PCM_IN) { + int sel = ac97_return_record_select(dev->ctl_aoutput); + + /* Use the same input for both left and right channels */ + sel |= (sel << 8); + + em28xx_write_ac97(dev, AC97_RECORD_SELECT, sel); + } } return ret; @@ -847,8 +860,11 @@ void em28xx_uninit_isoc(struct em28xx *dev) for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { urb = dev->isoc_ctl.urb[i]; if (urb) { - usb_kill_urb(urb); - usb_unlink_urb(urb); + if (!irqs_disabled()) + usb_kill_urb(urb); + else + usb_unlink_urb(urb); + if (dev->isoc_ctl.transfer_buffer[i]) { usb_buffer_free(dev->udev, urb->transfer_buffer_length, diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index d38cb21834d9..9ad8527b3fda 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -28,6 +28,7 @@ #include "lgdt330x.h" #include "zl10353.h" +#include "s5h1409.h" #ifdef EM28XX_DRX397XD_SUPPORT #include "drx397xD.h" #endif @@ -232,6 +233,15 @@ static struct zl10353_config em28xx_zl10353_with_xc3028 = { .if2 = 45600, }; +static struct s5h1409_config em28xx_s5h1409_with_xc3028 = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_PARALLEL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK +}; + #ifdef EM28XX_DRX397XD_SUPPORT /* [TODO] djh - not sure yet what the device config needs to contain */ static struct drx397xD_config em28xx_drx397xD_with_xc3028 = { @@ -412,7 +422,6 @@ static int dvb_init(struct em28xx *dev) case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: - case EM2883_BOARD_KWORLD_HYBRID_A316: case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: dvb->frontend = dvb_attach(lgdt330x_attach, &em2880_lgdt3303_dev, @@ -433,6 +442,15 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; + case EM2883_BOARD_KWORLD_HYBRID_330U: + dvb->frontend = dvb_attach(s5h1409_attach, + &em28xx_s5h1409_with_xc3028, + &dev->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) { + result = -EINVAL; + goto out_free; + } + break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: #ifdef EM28XX_DRX397XD_SUPPORT /* We don't have the config structure properly populated, so diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 416b691c33c1..8e61b2ca9167 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -886,10 +886,10 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i) if (0 == INPUT(i)->type) return -EINVAL; - mutex_lock(&dev->lock); - - video_mux(dev, i); + dev->ctl_input = i; + mutex_lock(&dev->lock); + video_mux(dev, dev->ctl_input); mutex_unlock(&dev->lock); return 0; } @@ -939,6 +939,12 @@ static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; + + if (a->index >= MAX_EM28XX_INPUT) + return -EINVAL; + if (0 == INPUT(a->index)->type) + return -EINVAL; + mutex_lock(&dev->lock); dev->ctl_ainput = INPUT(a->index)->amux; @@ -1950,6 +1956,7 @@ static struct video_device *em28xx_vdev_init(struct em28xx *dev, int em28xx_register_analog_devices(struct em28xx *dev) { + u8 val; int ret; printk(KERN_INFO "%s: v4l2 driver version %d.%d.%d\n", @@ -1957,34 +1964,34 @@ int em28xx_register_analog_devices(struct em28xx *dev) (EM28XX_VERSION_CODE >> 16) & 0xff, (EM28XX_VERSION_CODE >> 8) & 0xff, EM28XX_VERSION_CODE & 0xff); + /* set default norm */ + dev->norm = em28xx_video_template.current_norm; + dev->width = norm_maxw(dev); + dev->height = norm_maxh(dev); + dev->interlaced = EM28XX_INTERLACED_DEFAULT; + dev->hscale = 0; + dev->vscale = 0; + dev->ctl_input = 0; + /* Analog specific initialization */ dev->format = &format[0]; - video_mux(dev, 0); + video_mux(dev, dev->ctl_input); + + /* Audio defaults */ + dev->mute = 1; + dev->volume = 0x1f; /* enable vbi capturing */ /* em28xx_write_reg(dev, EM28XX_R0E_AUDIOSRC, 0xc0); audio register */ -/* em28xx_write_reg(dev, EM28XX_R0F_XCLK, 0x80); clk register */ + val = (u8)em28xx_read_reg(dev, EM28XX_R0F_XCLK); + em28xx_write_reg(dev, EM28XX_R0F_XCLK, (EM28XX_XCLK_AUDIO_UNMUTE | val)); em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x51); - dev->mute = 1; /* maybe not the right place... */ - dev->volume = 0x1f; - em28xx_set_outfmt(dev); em28xx_colorlevels_set_default(dev); em28xx_compression_disable(dev); - /* set default norm */ - dev->norm = em28xx_video_template.current_norm; - dev->width = norm_maxw(dev); - dev->height = norm_maxh(dev); - dev->interlaced = EM28XX_INTERLACED_DEFAULT; - dev->hscale = 0; - dev->vscale = 0; - - /* FIXME: This is a very bad hack! Not all devices have TV on input 2 */ - dev->ctl_input = 2; - /* allocate and fill video video_device struct */ dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video"); if (!dev->vdev) { diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 6c6b94aa05b2..dd2cd36fb1bb 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -94,7 +94,7 @@ #define EM2882_BOARD_KWORLD_VS_DVBT 54 #define EM2882_BOARD_TERRATEC_HYBRID_XS 55 #define EM2882_BOARD_PINNACLE_HYBRID_PRO 56 -#define EM2883_BOARD_KWORLD_HYBRID_A316 57 +#define EM2883_BOARD_KWORLD_HYBRID_330U 57 #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU 58 #define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 60 #define EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2 61 @@ -300,13 +300,32 @@ enum em28xx_amux { }; enum em28xx_aout { + /* AC97 outputs */ EM28XX_AOUT_MASTER = 1 << 0, EM28XX_AOUT_LINE = 1 << 1, EM28XX_AOUT_MONO = 1 << 2, EM28XX_AOUT_LFE = 1 << 3, EM28XX_AOUT_SURR = 1 << 4, + + /* PCM IN Mixer - used by AC97_RECORD_SELECT register */ + EM28XX_AOUT_PCM_IN = 1 << 7, + + /* Bits 10-8 are used to indicate the PCM IN record select */ + EM28XX_AOUT_PCM_MIC_PCM = 0 << 8, + EM28XX_AOUT_PCM_CD = 1 << 8, + EM28XX_AOUT_PCM_VIDEO = 2 << 8, + EM28XX_AOUT_PCM_AUX = 3 << 8, + EM28XX_AOUT_PCM_LINE = 4 << 8, + EM28XX_AOUT_PCM_STEREO = 5 << 8, + EM28XX_AOUT_PCM_MONO = 6 << 8, + EM28XX_AOUT_PCM_PHONE = 7 << 8, }; +static inline int ac97_return_record_select(int a_out) +{ + return (a_out & 0x700) >> 8; +} + struct em28xx_reg_seq { int reg; unsigned char val, mask; diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 5e36b9a4ae3e..2ed24527ecd6 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -423,7 +423,8 @@ static void destroy_urbs(struct gspca_dev *gspca_dev) break; gspca_dev->urb[i] = NULL; - usb_kill_urb(urb); + if (!gspca_dev->present) + usb_kill_urb(urb); if (urb->transfer_buffer != NULL) usb_buffer_free(gspca_dev->dev, urb->transfer_buffer_length, @@ -1950,7 +1951,6 @@ void gspca_disconnect(struct usb_interface *intf) struct gspca_dev *gspca_dev = usb_get_intfdata(intf); gspca_dev->present = 0; - gspca_dev->streaming = 0; usb_set_intfdata(intf, NULL); diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index e8e5921cdc34..c46c990987f9 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -949,8 +949,10 @@ static int __devinit ivtv_probe(struct pci_dev *dev, itv->instance = atomic_inc_return(&ivtv_instance) - 1; retval = v4l2_device_register(&dev->dev, &itv->device); - if (retval) + if (retval) { + kfree(itv); return retval; + } /* "ivtv + PCI ID" is a bit of a mouthful, so use "ivtv + instance" instead. */ snprintf(itv->device.name, sizeof(itv->device.name), diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 39fbc970f43d..0d810189dd87 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -62,7 +62,6 @@ #include <linux/poll.h> #include <linux/slab.h> #include <linux/vmalloc.h> -#include <linux/version.h> #include <asm/io.h> #include "pwc.h" diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c index d6848f7a503b..05221d47dd4c 100644 --- a/drivers/media/video/saa7127.c +++ b/drivers/media/video/saa7127.c @@ -149,7 +149,7 @@ static const struct i2c_reg_value saa7127_init_config_common[] = { { SAA7127_REG_COPYGEN_0, 0x77 }, { SAA7127_REG_COPYGEN_1, 0x41 }, { SAA7127_REG_COPYGEN_2, 0x00 }, /* Macrovision enable/disable */ - { SAA7127_REG_OUTPUT_PORT_CONTROL, 0x9e }, + { SAA7127_REG_OUTPUT_PORT_CONTROL, 0xbf }, { SAA7127_REG_GAIN_LUMINANCE_RGB, 0x00 }, { SAA7127_REG_GAIN_COLORDIFF_RGB, 0x00 }, { SAA7127_REG_INPUT_PORT_CONTROL_1, 0x80 }, /* for color bars */ @@ -488,12 +488,18 @@ static int saa7127_set_output_type(struct v4l2_subdev *sd, int output) break; case SAA7127_OUTPUT_TYPE_COMPOSITE: - state->reg_2d = 0x08; /* 00001000 CVBS only, RGB DAC's off (high impedance mode) */ + if (state->ident == V4L2_IDENT_SAA7129) + state->reg_2d = 0x20; /* CVBS only */ + else + state->reg_2d = 0x08; /* 00001000 CVBS only, RGB DAC's off (high impedance mode) */ state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ break; case SAA7127_OUTPUT_TYPE_SVIDEO: - state->reg_2d = 0xff; /* 11111111 croma -> R, luma -> CVBS + G + B */ + if (state->ident == V4L2_IDENT_SAA7129) + state->reg_2d = 0x18; /* Y + C */ + else + state->reg_2d = 0xff; /*11111111 croma -> R, luma -> CVBS + G + B */ state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ break; @@ -508,7 +514,10 @@ static int saa7127_set_output_type(struct v4l2_subdev *sd, int output) break; case SAA7127_OUTPUT_TYPE_BOTH: - state->reg_2d = 0xbf; + if (state->ident == V4L2_IDENT_SAA7129) + state->reg_2d = 0x38; + else + state->reg_2d = 0xbf; state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ break; @@ -731,24 +740,6 @@ static int saa7127_probe(struct i2c_client *client, return -ENODEV; } - /* Configure Encoder */ - - v4l2_dbg(1, debug, sd, "Configuring encoder\n"); - saa7127_write_inittab(sd, saa7127_init_config_common); - saa7127_set_std(sd, V4L2_STD_NTSC); - saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH); - saa7127_set_vps(sd, &vbi); - saa7127_set_wss(sd, &vbi); - saa7127_set_cc(sd, &vbi); - saa7127_set_xds(sd, &vbi); - if (test_image == 1) - /* The Encoder has an internal Colorbar generator */ - /* This can be used for debugging */ - saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE); - else - saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL); - saa7127_set_video_enable(sd, 1); - if (id->driver_data) { /* Chip type is already known */ state->ident = id->driver_data; } else { /* Needs detection */ @@ -770,6 +761,23 @@ static int saa7127_probe(struct i2c_client *client, v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, client->addr << 1, client->adapter->name); + + v4l2_dbg(1, debug, sd, "Configuring encoder\n"); + saa7127_write_inittab(sd, saa7127_init_config_common); + saa7127_set_std(sd, V4L2_STD_NTSC); + saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH); + saa7127_set_vps(sd, &vbi); + saa7127_set_wss(sd, &vbi); + saa7127_set_cc(sd, &vbi); + saa7127_set_xds(sd, &vbi); + if (test_image == 1) + /* The Encoder has an internal Colorbar generator */ + /* This can be used for debugging */ + saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE); + else + saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL); + saa7127_set_video_enable(sd, 1); + if (state->ident == V4L2_IDENT_SAA7129) saa7127_write_inittab(sd, saa7129_init_config_extra); return 0; diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index 26194a0ce927..c750d3dd57d2 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -1089,7 +1089,11 @@ static int saa7134_alsa_init(void) list_for_each(list,&saa7134_devlist) { dev = list_entry(list, struct saa7134_dev, devlist); - alsa_device_init(dev); + if (dev->pci->device == PCI_DEVICE_ID_PHILIPS_SAA7130) + printk(KERN_INFO "%s/alsa: %s doesn't support digital audio\n", + dev->name, saa7134_boards[dev->board].name); + else + alsa_device_init(dev); } if (dev == NULL) diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index dfbe08a9ad9b..99221d726edb 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -660,6 +660,10 @@ static int saa7134_hwinit1(struct saa7134_dev *dev) saa_writel(SAA7134_IRQ1, 0); saa_writel(SAA7134_IRQ2, 0); + + /* Clear any stale IRQ reports */ + saa_writel(SAA7134_IRQ_REPORT, saa_readl(SAA7134_IRQ_REPORT)); + mutex_init(&dev->lock); spin_lock_init(&dev->slock); diff --git a/drivers/media/video/saa717x.c b/drivers/media/video/saa717x.c index 454ad1dd7507..88c5e942f751 100644 --- a/drivers/media/video/saa717x.c +++ b/drivers/media/video/saa717x.c @@ -30,7 +30,6 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/sched.h> diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c index 56f0c0eb500f..00c6cbe06ab0 100644 --- a/drivers/media/video/tda9875.c +++ b/drivers/media/video/tda9875.c @@ -242,7 +242,7 @@ static int tda9875_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) static int tda9875_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) { struct tda9875 *t = to_state(sd); - int chvol=0, volume, balance, left, right; + int chvol = 0, volume = 0, balance = 0, left, right; switch (ctrl->id) { case V4L2_CID_AUDIO_VOLUME: diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index 3b0b84c2e451..78277abb733b 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -427,6 +427,9 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, const char *t_fmt_name2[8] = { " none", "", "", "", "", "", "", "" }; memset(tvee, 0, sizeof(*tvee)); + tvee->tuner_type = TUNER_ABSENT; + tvee->tuner2_type = TUNER_ABSENT; + done = len = beenhere = 0; /* Different eeprom start offsets for em28xx, cx2388x and cx23418 */ diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c index ac9aa40d09f6..8e23aa53c29a 100644 --- a/drivers/media/video/tvp514x.c +++ b/drivers/media/video/tvp514x.c @@ -1401,7 +1401,7 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) decoder->pdata = client->dev.platform_data; if (!decoder->pdata) { - v4l_err(client, "No platform data\n!!"); + v4l_err(client, "No platform data!!\n"); return -ENODEV; } /* diff --git a/drivers/media/video/upd64031a.c b/drivers/media/video/upd64031a.c index 4f16effb530f..f4522bb08916 100644 --- a/drivers/media/video/upd64031a.c +++ b/drivers/media/video/upd64031a.c @@ -21,7 +21,6 @@ */ -#include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/i2c.h> diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c index 4b712f69d1b7..a5fb74bf2407 100644 --- a/drivers/media/video/upd64083.c +++ b/drivers/media/video/upd64083.c @@ -21,7 +21,6 @@ * 02110-1301, USA. */ -#include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/i2c.h> diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c index 9907b9aff2b9..6b66ae4f430f 100644 --- a/drivers/media/video/usbvision/usbvision-i2c.c +++ b/drivers/media/video/usbvision/usbvision-i2c.c @@ -157,7 +157,7 @@ usbvision_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num) struct i2c_msg *pmsg; struct usb_usbvision *usbvision; int i, ret; - unsigned char addr; + unsigned char addr = 0; usbvision = (struct usb_usbvision *)i2c_get_adapdata(i2c_adap); diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index 2208165aa6f0..d2576f6391c0 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -1,7 +1,7 @@ /* * uvc_ctrl.c -- USB Video Class driver - Controls * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -12,7 +12,6 @@ */ #include <linux/kernel.h> -#include <linux/version.h> #include <linux/list.h> #include <linux/module.h> #include <linux/uaccess.h> @@ -29,7 +28,7 @@ #define UVC_CTRL_DATA_BACKUP 1 /* ------------------------------------------------------------------------ - * Control, formats, ... + * Controls */ static struct uvc_control_info uvc_ctrls[] = { @@ -635,7 +634,7 @@ static __s32 uvc_get_le_value(struct uvc_control_mapping *mapping, mask = (1 << bits) - 1; } - /* Sign-extend the value if needed */ + /* Sign-extend the value if needed. */ if (mapping->data_type == UVC_CTRL_DATA_TYPE_SIGNED) value |= -(value & (1 << (mapping->size - 1))); diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 89d8bd10a852..b12873265cc5 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1,7 +1,7 @@ /* * uvc_driver.c -- USB Video Class driver * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -24,7 +24,6 @@ */ #include <linux/kernel.h> -#include <linux/version.h> #include <linux/list.h> #include <linux/module.h> #include <linux/usb.h> @@ -49,7 +48,7 @@ static unsigned int uvc_quirks_param; unsigned int uvc_trace_param; /* ------------------------------------------------------------------------ - * Control, formats, ... + * Video formats */ static struct uvc_format_desc uvc_fmts[] = { @@ -474,7 +473,7 @@ static int uvc_parse_format(struct uvc_device *dev, /* Several UVC chipsets screw up dwMaxVideoFrameBufferSize * completely. Observed behaviours range from setting the - * value to 1.1x the actual frame size of hardwiring the + * value to 1.1x the actual frame size to hardwiring the * 16 low bits to 0. This results in a higher than necessary * memory usage as well as a wrong image size information. For * uncompressed formats this can be fixed by computing the @@ -487,7 +486,7 @@ static int uvc_parse_format(struct uvc_device *dev, /* Some bogus devices report dwMinFrameInterval equal to * dwMaxFrameInterval and have dwFrameIntervalStep set to * zero. Setting all null intervals to 1 fixes the problem and - * some other divisions by zero which could happen. + * some other divisions by zero that could happen. */ for (i = 0; i < n; ++i) { interval = get_unaligned_le32(&buffer[26+4*i]); @@ -1200,13 +1199,13 @@ static void uvc_unregister_video(struct uvc_device *dev) * Scan the UVC descriptors to locate a chain starting at an Output Terminal * and containing the following units: * - * - a USB Streaming Output Terminal + * - one Output Terminal (USB Streaming or Display) * - zero or one Processing Unit * - zero, one or mode single-input Selector Units * - zero or one multiple-input Selector Units, provided all inputs are * connected to input terminals * - zero, one or mode single-input Extension Units - * - one Camera Input Terminal, or one or more External terminals. + * - one or more Input Terminals (Camera, External or USB Streaming) * * A side forward scan is made on each detected entity to check for additional * extension units. @@ -1531,10 +1530,6 @@ static int uvc_register_video(struct uvc_device *dev) /* Set the driver data before calling video_register_device, otherwise * uvc_v4l2_open might race us. - * - * FIXME: usb_set_intfdata hasn't been called so far. Is that a - * problem ? Does any function which could be called here get - * a pointer to the usb_interface ? */ dev->video.vdev = vdev; video_set_drvdata(vdev, &dev->video); @@ -1569,7 +1564,7 @@ void uvc_delete(struct kref *kref) struct uvc_device *dev = container_of(kref, struct uvc_device, kref); struct list_head *p, *n; - /* Unregister the video device */ + /* Unregister the video device. */ uvc_unregister_video(dev); usb_put_intf(dev->intf); usb_put_dev(dev->udev); @@ -1612,7 +1607,7 @@ static int uvc_probe(struct usb_interface *intf, uvc_trace(UVC_TRACE_PROBE, "Probing generic UVC device %s\n", udev->devpath); - /* Allocate memory for the device and initialize it */ + /* Allocate memory for the device and initialize it. */ if ((dev = kzalloc(sizeof *dev, GFP_KERNEL)) == NULL) return -ENOMEM; @@ -1633,14 +1628,14 @@ static int uvc_probe(struct usb_interface *intf, le16_to_cpu(udev->descriptor.idVendor), le16_to_cpu(udev->descriptor.idProduct)); - /* Parse the Video Class control descriptor */ + /* Parse the Video Class control descriptor. */ if (uvc_parse_control(dev) < 0) { uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC " "descriptors.\n"); goto error; } - uvc_printk(KERN_INFO, "Found UVC %u.%02u device %s (%04x:%04x)\n", + uvc_printk(KERN_INFO, "Found UVC %u.%02x device %s (%04x:%04x)\n", dev->uvc_version >> 8, dev->uvc_version & 0xff, udev->product ? udev->product : "<unnamed>", le16_to_cpu(udev->descriptor.idVendor), @@ -1653,18 +1648,18 @@ static int uvc_probe(struct usb_interface *intf, "linux-uvc-devel mailing list.\n"); } - /* Initialize controls */ + /* Initialize controls. */ if (uvc_ctrl_init_device(dev) < 0) goto error; - /* Register the video devices */ + /* Register the video devices. */ if (uvc_register_video(dev) < 0) goto error; - /* Save our data pointer in the interface data */ + /* Save our data pointer in the interface data. */ usb_set_intfdata(intf, dev); - /* Initialize the interrupt URB */ + /* Initialize the interrupt URB. */ if ((ret = uvc_status_init(dev)) < 0) { uvc_printk(KERN_INFO, "Unable to initialize the status " "endpoint (%d), status interrupt will not be " @@ -1839,24 +1834,24 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0 }, /* Apple Built-In iSight */ - { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = 0x05ac, .idProduct = 0x8501, - .bInterfaceClass = USB_CLASS_VIDEO, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 0, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX | UVC_QUIRK_BUILTIN_ISIGHT }, /* Genesys Logic USB 2.0 PC Camera */ - { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x05e3, - .idProduct = 0x0505, - .bInterfaceClass = USB_CLASS_VIDEO, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 0, - .driver_info = UVC_QUIRK_STREAM_NO_FID }, + .idVendor = 0x05e3, + .idProduct = 0x0505, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STREAM_NO_FID }, /* MT6227 */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, diff --git a/drivers/media/video/uvc/uvc_isight.c b/drivers/media/video/uvc/uvc_isight.c index 37bdefdbead5..436f462685a0 100644 --- a/drivers/media/video/uvc/uvc_isight.c +++ b/drivers/media/video/uvc/uvc_isight.c @@ -3,6 +3,8 @@ * * Copyright (C) 2006-2007 * Ivan N. Zlatev <contact@i-nz.net> + * Copyright (C) 2008-2009 + * Laurent Pinchart <laurent.pinchart@skynet.be> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c index 42546342e97d..0155752e4a5a 100644 --- a/drivers/media/video/uvc/uvc_queue.c +++ b/drivers/media/video/uvc/uvc_queue.c @@ -1,7 +1,7 @@ /* * uvc_queue.c -- USB Video Class driver - Buffers management * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -12,7 +12,6 @@ */ #include <linux/kernel.h> -#include <linux/version.h> #include <linux/mm.h> #include <linux/list.h> #include <linux/module.h> @@ -37,22 +36,22 @@ * to user space will return -EBUSY. * * Video buffers are managed using two queues. However, unlike most USB video - * drivers which use an in queue and an out queue, we use a main queue which - * holds all queued buffers (both 'empty' and 'done' buffers), and an irq - * queue which holds empty buffers. This design (copied from video-buf) - * minimizes locking in interrupt, as only one queue is shared between - * interrupt and user contexts. + * drivers that use an in queue and an out queue, we use a main queue to hold + * all queued buffers (both 'empty' and 'done' buffers), and an irq queue to + * hold empty buffers. This design (copied from video-buf) minimizes locking + * in interrupt, as only one queue is shared between interrupt and user + * contexts. * * Use cases * --------- * - * Unless stated otherwise, all operations which modify the irq buffers queue + * Unless stated otherwise, all operations that modify the irq buffers queue * are protected by the irq spinlock. * * 1. The user queues the buffers, starts streaming and dequeues a buffer. * * The buffers are added to the main and irq queues. Both operations are - * protected by the queue lock, and the latert is protected by the irq + * protected by the queue lock, and the later is protected by the irq * spinlock as well. * * The completion handler fetches a buffer from the irq queue and fills it @@ -60,7 +59,7 @@ * returns immediately. * * When the buffer is full, the completion handler removes it from the irq - * queue, marks it as ready (UVC_BUF_STATE_DONE) and wake its wait queue. + * queue, marks it as ready (UVC_BUF_STATE_DONE) and wakes its wait queue. * At that point, any process waiting on the buffer will be woken up. If a * process tries to dequeue a buffer after it has been marked ready, the * dequeing will succeed immediately. @@ -91,8 +90,8 @@ void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type) /* * Allocate the video buffers. * - * Pages are reserved to make sure they will not be swaped, as they will be - * filled in URB completion handler. + * Pages are reserved to make sure they will not be swapped, as they will be + * filled in the URB completion handler. * * Buffers will be individually mapped, so they must all be page aligned. */ @@ -210,8 +209,8 @@ int uvc_query_buffer(struct uvc_video_queue *queue, __uvc_query_buffer(&queue->buffer[v4l2_buf->index], v4l2_buf); done: - mutex_unlock(&queue->mutex); - return ret; + mutex_unlock(&queue->mutex); + return ret; } /* @@ -236,7 +235,7 @@ int uvc_queue_buffer(struct uvc_video_queue *queue, } mutex_lock(&queue->mutex); - if (v4l2_buf->index >= queue->count) { + if (v4l2_buf->index >= queue->count) { uvc_trace(UVC_TRACE_CAPTURE, "[E] Out of range index.\n"); ret = -EINVAL; goto done; @@ -429,7 +428,7 @@ done: * Cancel the video buffers queue. * * Cancelling the queue marks all buffers on the irq queue as erroneous, - * wakes them up and remove them from the queue. + * wakes them up and removes them from the queue. * * If the disconnect parameter is set, further calls to uvc_queue_buffer will * fail with -ENODEV. diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c index 5d60b264d59a..c1e4ae27c613 100644 --- a/drivers/media/video/uvc/uvc_status.c +++ b/drivers/media/video/uvc/uvc_status.c @@ -1,7 +1,7 @@ /* * uvc_status.c -- USB Video Class driver - Status endpoint * - * Copyright (C) 2007-2008 + * Copyright (C) 2007-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -12,7 +12,6 @@ */ #include <linux/kernel.h> -#include <linux/version.h> #include <linux/input.h> #include <linux/usb.h> #include <linux/usb/input.h> diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c index fa150fff2c10..d681519d0c8a 100644 --- a/drivers/media/video/uvc/uvc_v4l2.c +++ b/drivers/media/video/uvc/uvc_v4l2.c @@ -1,7 +1,7 @@ /* * uvc_v4l2.c -- USB Video Class driver - V4L2 API * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -37,7 +37,7 @@ * must be grouped (for instance the Red Balance, Blue Balance and Do White * Balance V4L2 controls use the White Balance Component UVC control) or * otherwise translated. The approach we take here is to use a translation - * table for the controls which can be mapped directly, and handle the others + * table for the controls that can be mapped directly, and handle the others * manually. */ static int uvc_v4l2_query_menu(struct uvc_video_device *video, @@ -189,7 +189,7 @@ static int uvc_v4l2_try_format(struct uvc_video_device *video, probe->dwMaxVideoFrameSize = video->streaming->ctrl.dwMaxVideoFrameSize; - /* Probe the device */ + /* Probe the device. */ if ((ret = uvc_probe_video(video, probe)) < 0) goto done; @@ -354,11 +354,11 @@ static int uvc_v4l2_set_streamparm(struct uvc_video_device *video, * * Each open instance of a UVC device can either be in a privileged or * unprivileged state. Only a single instance can be in a privileged state at - * a given time. Trying to perform an operation which requires privileges will + * a given time. Trying to perform an operation that requires privileges will * automatically acquire the required privileges if possible, or return -EBUSY * otherwise. Privileges are dismissed when closing the instance. * - * Operations which require privileges are: + * Operations that require privileges are: * * - VIDIOC_S_INPUT * - VIDIOC_S_PARM diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index e7c31995527f..9bc4705be78d 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -1,7 +1,7 @@ /* * uvc_video.c -- USB Video Class driver - Video handling * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -12,7 +12,6 @@ */ #include <linux/kernel.h> -#include <linux/version.h> #include <linux/list.h> #include <linux/module.h> #include <linux/usb.h> @@ -115,7 +114,7 @@ static int uvc_get_video_ctrl(struct uvc_video_device *video, ctrl->wCompQuality = le16_to_cpup((__le16 *)data); ret = 0; goto out; - } else if (query == GET_DEF && probe == 1) { + } else if (query == GET_DEF && probe == 1 && ret != size) { /* Many cameras don't support the GET_DEF request on their * video probe control. Warn once and return, the caller will * fall back to GET_CUR. @@ -160,7 +159,7 @@ static int uvc_get_video_ctrl(struct uvc_video_device *video, } /* Some broken devices return a null or wrong dwMaxVideoFrameSize. - * Try to get the value from the format and frame descriptor. + * Try to get the value from the format and frame descriptors. */ uvc_fixup_buffer_size(video, ctrl); ret = 0; @@ -191,9 +190,6 @@ static int uvc_set_video_ctrl(struct uvc_video_device *video, *(__le16 *)&data[12] = cpu_to_le16(ctrl->wCompQuality); *(__le16 *)&data[14] = cpu_to_le16(ctrl->wCompWindowSize); *(__le16 *)&data[16] = cpu_to_le16(ctrl->wDelay); - /* Note: Some of the fields below are not required for IN devices (see - * UVC spec, 4.3.1.1), but we still copy them in case support for OUT - * devices is added in the future. */ put_unaligned_le32(ctrl->dwMaxVideoFrameSize, &data[18]); put_unaligned_le32(ctrl->dwMaxPayloadTransferSize, &data[22]); @@ -400,7 +396,7 @@ static int uvc_video_decode_start(struct uvc_video_device *video, * * Empty buffers (bytesused == 0) don't trigger end of frame detection * as it doesn't make sense to return an empty buffer. This also - * avoids detecting and of frame conditions at FID toggling if the + * avoids detecting end of frame conditions at FID toggling if the * previous payload had the EOF bit set. */ if (fid != video->last_fid && buf->buf.bytesused != 0) { @@ -453,6 +449,17 @@ static void uvc_video_decode_end(struct uvc_video_device *video, } } +/* Video payload encoding is handled by uvc_video_encode_header() and + * uvc_video_encode_data(). Only bulk transfers are currently supported. + * + * uvc_video_encode_header is called at the start of a payload. It adds header + * data to the transfer buffer and returns the header size. As the only known + * UVC output device transfers a whole frame in a single payload, the EOF bit + * is always set in the header. + * + * uvc_video_encode_data is called for every URB and copies the data from the + * video buffer to the transfer buffer. + */ static int uvc_video_encode_header(struct uvc_video_device *video, struct uvc_buffer *buf, __u8 *data, int len) { @@ -953,7 +960,7 @@ int uvc_video_suspend(struct uvc_video_device *video) } /* - * Reconfigure the video interface and restart streaming if it was enable + * Reconfigure the video interface and restart streaming if it was enabled * before suspend. * * If an error occurs, disable the video queue. This will wake all pending @@ -985,8 +992,8 @@ int uvc_video_resume(struct uvc_video_device *video) */ /* - * Initialize the UVC video device by retrieving the default format and - * committing it. + * Initialize the UVC video device by switching to alternate setting 0 and + * retrieve the default format. * * Some cameras (namely the Fuji Finepix) set the format and frame * indexes to zero. The UVC standard doesn't clearly make this a spec @@ -1014,7 +1021,7 @@ int uvc_video_init(struct uvc_video_device *video) */ usb_set_interface(video->dev->udev, video->streaming->intfnum, 0); - /* Some webcams don't suport GET_DEF request on the probe control. We + /* Some webcams don't suport GET_DEF requests on the probe control. We * fall back to GET_CUR if GET_DEF fails. */ if ((ret = uvc_get_video_ctrl(video, probe, 1, GET_DEF)) < 0 && diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h index bcf4361dc1bc..027947ea9b6e 100644 --- a/drivers/media/video/uvc/uvcvideo.h +++ b/drivers/media/video/uvc/uvcvideo.h @@ -72,149 +72,149 @@ struct uvc_xu_control { * UVC constants */ -#define SC_UNDEFINED 0x00 -#define SC_VIDEOCONTROL 0x01 -#define SC_VIDEOSTREAMING 0x02 -#define SC_VIDEO_INTERFACE_COLLECTION 0x03 +#define SC_UNDEFINED 0x00 +#define SC_VIDEOCONTROL 0x01 +#define SC_VIDEOSTREAMING 0x02 +#define SC_VIDEO_INTERFACE_COLLECTION 0x03 -#define PC_PROTOCOL_UNDEFINED 0x00 +#define PC_PROTOCOL_UNDEFINED 0x00 -#define CS_UNDEFINED 0x20 -#define CS_DEVICE 0x21 -#define CS_CONFIGURATION 0x22 -#define CS_STRING 0x23 -#define CS_INTERFACE 0x24 -#define CS_ENDPOINT 0x25 +#define CS_UNDEFINED 0x20 +#define CS_DEVICE 0x21 +#define CS_CONFIGURATION 0x22 +#define CS_STRING 0x23 +#define CS_INTERFACE 0x24 +#define CS_ENDPOINT 0x25 /* VideoControl class specific interface descriptor */ -#define VC_DESCRIPTOR_UNDEFINED 0x00 -#define VC_HEADER 0x01 -#define VC_INPUT_TERMINAL 0x02 -#define VC_OUTPUT_TERMINAL 0x03 -#define VC_SELECTOR_UNIT 0x04 -#define VC_PROCESSING_UNIT 0x05 -#define VC_EXTENSION_UNIT 0x06 +#define VC_DESCRIPTOR_UNDEFINED 0x00 +#define VC_HEADER 0x01 +#define VC_INPUT_TERMINAL 0x02 +#define VC_OUTPUT_TERMINAL 0x03 +#define VC_SELECTOR_UNIT 0x04 +#define VC_PROCESSING_UNIT 0x05 +#define VC_EXTENSION_UNIT 0x06 /* VideoStreaming class specific interface descriptor */ -#define VS_UNDEFINED 0x00 -#define VS_INPUT_HEADER 0x01 -#define VS_OUTPUT_HEADER 0x02 -#define VS_STILL_IMAGE_FRAME 0x03 -#define VS_FORMAT_UNCOMPRESSED 0x04 -#define VS_FRAME_UNCOMPRESSED 0x05 -#define VS_FORMAT_MJPEG 0x06 -#define VS_FRAME_MJPEG 0x07 -#define VS_FORMAT_MPEG2TS 0x0a -#define VS_FORMAT_DV 0x0c -#define VS_COLORFORMAT 0x0d -#define VS_FORMAT_FRAME_BASED 0x10 -#define VS_FRAME_FRAME_BASED 0x11 -#define VS_FORMAT_STREAM_BASED 0x12 +#define VS_UNDEFINED 0x00 +#define VS_INPUT_HEADER 0x01 +#define VS_OUTPUT_HEADER 0x02 +#define VS_STILL_IMAGE_FRAME 0x03 +#define VS_FORMAT_UNCOMPRESSED 0x04 +#define VS_FRAME_UNCOMPRESSED 0x05 +#define VS_FORMAT_MJPEG 0x06 +#define VS_FRAME_MJPEG 0x07 +#define VS_FORMAT_MPEG2TS 0x0a +#define VS_FORMAT_DV 0x0c +#define VS_COLORFORMAT 0x0d +#define VS_FORMAT_FRAME_BASED 0x10 +#define VS_FRAME_FRAME_BASED 0x11 +#define VS_FORMAT_STREAM_BASED 0x12 /* Endpoint type */ -#define EP_UNDEFINED 0x00 -#define EP_GENERAL 0x01 -#define EP_ENDPOINT 0x02 -#define EP_INTERRUPT 0x03 +#define EP_UNDEFINED 0x00 +#define EP_GENERAL 0x01 +#define EP_ENDPOINT 0x02 +#define EP_INTERRUPT 0x03 /* Request codes */ -#define RC_UNDEFINED 0x00 -#define SET_CUR 0x01 -#define GET_CUR 0x81 -#define GET_MIN 0x82 -#define GET_MAX 0x83 -#define GET_RES 0x84 -#define GET_LEN 0x85 -#define GET_INFO 0x86 -#define GET_DEF 0x87 +#define RC_UNDEFINED 0x00 +#define SET_CUR 0x01 +#define GET_CUR 0x81 +#define GET_MIN 0x82 +#define GET_MAX 0x83 +#define GET_RES 0x84 +#define GET_LEN 0x85 +#define GET_INFO 0x86 +#define GET_DEF 0x87 /* VideoControl interface controls */ -#define VC_CONTROL_UNDEFINED 0x00 -#define VC_VIDEO_POWER_MODE_CONTROL 0x01 -#define VC_REQUEST_ERROR_CODE_CONTROL 0x02 +#define VC_CONTROL_UNDEFINED 0x00 +#define VC_VIDEO_POWER_MODE_CONTROL 0x01 +#define VC_REQUEST_ERROR_CODE_CONTROL 0x02 /* Terminal controls */ -#define TE_CONTROL_UNDEFINED 0x00 +#define TE_CONTROL_UNDEFINED 0x00 /* Selector Unit controls */ -#define SU_CONTROL_UNDEFINED 0x00 -#define SU_INPUT_SELECT_CONTROL 0x01 +#define SU_CONTROL_UNDEFINED 0x00 +#define SU_INPUT_SELECT_CONTROL 0x01 /* Camera Terminal controls */ -#define CT_CONTROL_UNDEFINED 0x00 -#define CT_SCANNING_MODE_CONTROL 0x01 -#define CT_AE_MODE_CONTROL 0x02 -#define CT_AE_PRIORITY_CONTROL 0x03 -#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 -#define CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 -#define CT_FOCUS_ABSOLUTE_CONTROL 0x06 -#define CT_FOCUS_RELATIVE_CONTROL 0x07 -#define CT_FOCUS_AUTO_CONTROL 0x08 -#define CT_IRIS_ABSOLUTE_CONTROL 0x09 -#define CT_IRIS_RELATIVE_CONTROL 0x0a -#define CT_ZOOM_ABSOLUTE_CONTROL 0x0b -#define CT_ZOOM_RELATIVE_CONTROL 0x0c -#define CT_PANTILT_ABSOLUTE_CONTROL 0x0d -#define CT_PANTILT_RELATIVE_CONTROL 0x0e -#define CT_ROLL_ABSOLUTE_CONTROL 0x0f -#define CT_ROLL_RELATIVE_CONTROL 0x10 -#define CT_PRIVACY_CONTROL 0x11 +#define CT_CONTROL_UNDEFINED 0x00 +#define CT_SCANNING_MODE_CONTROL 0x01 +#define CT_AE_MODE_CONTROL 0x02 +#define CT_AE_PRIORITY_CONTROL 0x03 +#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 +#define CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 +#define CT_FOCUS_ABSOLUTE_CONTROL 0x06 +#define CT_FOCUS_RELATIVE_CONTROL 0x07 +#define CT_FOCUS_AUTO_CONTROL 0x08 +#define CT_IRIS_ABSOLUTE_CONTROL 0x09 +#define CT_IRIS_RELATIVE_CONTROL 0x0a +#define CT_ZOOM_ABSOLUTE_CONTROL 0x0b +#define CT_ZOOM_RELATIVE_CONTROL 0x0c +#define CT_PANTILT_ABSOLUTE_CONTROL 0x0d +#define CT_PANTILT_RELATIVE_CONTROL 0x0e +#define CT_ROLL_ABSOLUTE_CONTROL 0x0f +#define CT_ROLL_RELATIVE_CONTROL 0x10 +#define CT_PRIVACY_CONTROL 0x11 /* Processing Unit controls */ -#define PU_CONTROL_UNDEFINED 0x00 -#define PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 -#define PU_BRIGHTNESS_CONTROL 0x02 -#define PU_CONTRAST_CONTROL 0x03 -#define PU_GAIN_CONTROL 0x04 -#define PU_POWER_LINE_FREQUENCY_CONTROL 0x05 -#define PU_HUE_CONTROL 0x06 -#define PU_SATURATION_CONTROL 0x07 -#define PU_SHARPNESS_CONTROL 0x08 -#define PU_GAMMA_CONTROL 0x09 -#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a -#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b -#define PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c -#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d -#define PU_DIGITAL_MULTIPLIER_CONTROL 0x0e -#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f -#define PU_HUE_AUTO_CONTROL 0x10 -#define PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 -#define PU_ANALOG_LOCK_STATUS_CONTROL 0x12 +#define PU_CONTROL_UNDEFINED 0x00 +#define PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 +#define PU_BRIGHTNESS_CONTROL 0x02 +#define PU_CONTRAST_CONTROL 0x03 +#define PU_GAIN_CONTROL 0x04 +#define PU_POWER_LINE_FREQUENCY_CONTROL 0x05 +#define PU_HUE_CONTROL 0x06 +#define PU_SATURATION_CONTROL 0x07 +#define PU_SHARPNESS_CONTROL 0x08 +#define PU_GAMMA_CONTROL 0x09 +#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a +#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b +#define PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c +#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d +#define PU_DIGITAL_MULTIPLIER_CONTROL 0x0e +#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f +#define PU_HUE_AUTO_CONTROL 0x10 +#define PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 +#define PU_ANALOG_LOCK_STATUS_CONTROL 0x12 #define LXU_MOTOR_PANTILT_RELATIVE_CONTROL 0x01 #define LXU_MOTOR_PANTILT_RESET_CONTROL 0x02 #define LXU_MOTOR_FOCUS_MOTOR_CONTROL 0x03 /* VideoStreaming interface controls */ -#define VS_CONTROL_UNDEFINED 0x00 -#define VS_PROBE_CONTROL 0x01 -#define VS_COMMIT_CONTROL 0x02 -#define VS_STILL_PROBE_CONTROL 0x03 -#define VS_STILL_COMMIT_CONTROL 0x04 -#define VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 -#define VS_STREAM_ERROR_CODE_CONTROL 0x06 -#define VS_GENERATE_KEY_FRAME_CONTROL 0x07 -#define VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 -#define VS_SYNC_DELAY_CONTROL 0x09 - -#define TT_VENDOR_SPECIFIC 0x0100 -#define TT_STREAMING 0x0101 +#define VS_CONTROL_UNDEFINED 0x00 +#define VS_PROBE_CONTROL 0x01 +#define VS_COMMIT_CONTROL 0x02 +#define VS_STILL_PROBE_CONTROL 0x03 +#define VS_STILL_COMMIT_CONTROL 0x04 +#define VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 +#define VS_STREAM_ERROR_CODE_CONTROL 0x06 +#define VS_GENERATE_KEY_FRAME_CONTROL 0x07 +#define VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 +#define VS_SYNC_DELAY_CONTROL 0x09 + +#define TT_VENDOR_SPECIFIC 0x0100 +#define TT_STREAMING 0x0101 /* Input Terminal types */ -#define ITT_VENDOR_SPECIFIC 0x0200 -#define ITT_CAMERA 0x0201 -#define ITT_MEDIA_TRANSPORT_INPUT 0x0202 +#define ITT_VENDOR_SPECIFIC 0x0200 +#define ITT_CAMERA 0x0201 +#define ITT_MEDIA_TRANSPORT_INPUT 0x0202 /* Output Terminal types */ -#define OTT_VENDOR_SPECIFIC 0x0300 -#define OTT_DISPLAY 0x0301 -#define OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 +#define OTT_VENDOR_SPECIFIC 0x0300 +#define OTT_DISPLAY 0x0301 +#define OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 /* External Terminal types */ -#define EXTERNAL_VENDOR_SPECIFIC 0x0400 -#define COMPOSITE_CONNECTOR 0x0401 -#define SVIDEO_CONNECTOR 0x0402 -#define COMPONENT_CONNECTOR 0x0403 +#define EXTERNAL_VENDOR_SPECIFIC 0x0400 +#define COMPOSITE_CONNECTOR 0x0401 +#define SVIDEO_CONNECTOR 0x0402 +#define COMPONENT_CONNECTOR 0x0403 #define UVC_TERM_INPUT 0x0000 #define UVC_TERM_OUTPUT 0x8000 @@ -541,11 +541,11 @@ struct uvc_streaming { }; enum uvc_buffer_state { - UVC_BUF_STATE_IDLE = 0, - UVC_BUF_STATE_QUEUED = 1, - UVC_BUF_STATE_ACTIVE = 2, - UVC_BUF_STATE_DONE = 3, - UVC_BUF_STATE_ERROR = 4, + UVC_BUF_STATE_IDLE = 0, + UVC_BUF_STATE_QUEUED = 1, + UVC_BUF_STATE_ACTIVE = 2, + UVC_BUF_STATE_DONE = 3, + UVC_BUF_STATE_ERROR = 4, }; struct uvc_buffer { diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c index fbe9cc0d433a..21208805ea9b 100644 --- a/drivers/media/video/v4l2-subdev.c +++ b/drivers/media/video/v4l2-subdev.c @@ -28,13 +28,13 @@ int v4l2_subdev_command(struct v4l2_subdev *sd, unsigned cmd, void *arg) { switch (cmd) { case VIDIOC_QUERYCTRL: - return v4l2_subdev_call(sd, core, querymenu, arg); + return v4l2_subdev_call(sd, core, queryctrl, arg); case VIDIOC_G_CTRL: return v4l2_subdev_call(sd, core, g_ctrl, arg); case VIDIOC_S_CTRL: return v4l2_subdev_call(sd, core, s_ctrl, arg); case VIDIOC_QUERYMENU: - return v4l2_subdev_call(sd, core, queryctrl, arg); + return v4l2_subdev_call(sd, core, querymenu, arg); case VIDIOC_LOG_STATUS: return v4l2_subdev_call(sd, core, log_status); case VIDIOC_DBG_G_CHIP_IDENT: diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h index 46b7ad477ceb..e873a916250f 100644 --- a/drivers/media/video/zoran/zoran.h +++ b/drivers/media/video/zoran/zoran.h @@ -349,7 +349,6 @@ struct card_info { u16 i2c_decoder, i2c_encoder; /* I2C types */ u16 video_vfe, video_codec; /* videocodec types */ u16 audio_chip; /* audio type */ - u16 vendor_id, device_id; /* subsystem vendor/device ID */ int inputs; /* number of video inputs */ struct input { @@ -401,7 +400,6 @@ struct zoran { char name[32]; /* name of this device */ struct pci_dev *pci_dev; /* PCI device */ unsigned char revision; /* revision of zr36057 */ - unsigned int zr36057_adr; /* bus address of IO mem returned by PCI BIOS */ unsigned char __iomem *zr36057_mem;/* pointer to mapped IO memory */ spinlock_t spinlock; /* Spinlock */ @@ -490,16 +488,10 @@ struct zoran { wait_queue_head_t test_q; }; -/*The following should be done in more portable way. It depends on define - of _ALPHA_BUZ in the Makefile.*/ - -#ifdef _ALPHA_BUZ -#define btwrite(dat,adr) writel((dat), zr->zr36057_adr+(adr)) -#define btread(adr) readl(zr->zr36057_adr+(adr)) -#else +/* There was something called _ALPHA_BUZ that used the PCI address instead of + * the kernel iomapped address for btread/btwrite. */ #define btwrite(dat,adr) writel((dat), zr->zr36057_mem+(adr)) #define btread(adr) readl(zr->zr36057_mem+(adr)) -#endif #define btand(dat,adr) btwrite((dat) & btread(adr), adr) #define btor(dat,adr) btwrite((dat) | btread(adr), adr) diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 05f39195372e..5d2f090aa0f8 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -61,17 +61,17 @@ extern const struct zoran_format zoran_formats[]; -static int card[BUZ_MAX] = { -1, -1, -1, -1 }; +static int card[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 }; module_param_array(card, int, NULL, 0444); -MODULE_PARM_DESC(card, "The type of card"); +MODULE_PARM_DESC(card, "Card type"); -static int encoder[BUZ_MAX] = { -1, -1, -1, -1 }; +static int encoder[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 }; module_param_array(encoder, int, NULL, 0444); -MODULE_PARM_DESC(encoder, "i2c TV encoder"); +MODULE_PARM_DESC(encoder, "Video encoder chip"); -static int decoder[BUZ_MAX] = { -1, -1, -1, -1 }; +static int decoder[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 }; module_param_array(decoder, int, NULL, 0444); -MODULE_PARM_DESC(decoder, "i2c TV decoder"); +MODULE_PARM_DESC(decoder, "Video decoder chip"); /* The video mem address of the video card. @@ -104,9 +104,9 @@ module_param(default_norm, int, 0444); MODULE_PARM_DESC(default_norm, "Default norm (0=PAL, 1=NTSC, 2=SECAM)"); /* /dev/videoN, -1 for autodetect */ -static int video_nr[BUZ_MAX] = {-1, -1, -1, -1}; +static int video_nr[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 }; module_param_array(video_nr, int, NULL, 0444); -MODULE_PARM_DESC(video_nr, "video device number (-1=Auto)"); +MODULE_PARM_DESC(video_nr, "Video device number (-1=Auto)"); /* Number and size of grab buffers for Video 4 Linux @@ -153,9 +153,21 @@ MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver"); MODULE_AUTHOR("Serguei Miridonov"); MODULE_LICENSE("GPL"); +#define ZR_DEVICE(subven, subdev, data) { \ + .vendor = PCI_VENDOR_ID_ZORAN, .device = PCI_DEVICE_ID_ZORAN_36057, \ + .subvendor = (subven), .subdevice = (subdev), .driver_data = (data) } + +static struct pci_device_id zr36067_pci_tbl[] = { + ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC10PLUS, DC10plus), + ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC30PLUS, DC30plus), + ZR_DEVICE(PCI_VENDOR_ID_ELECTRONICDESIGNGMBH, PCI_DEVICE_ID_LML_33R10, LML33R10), + ZR_DEVICE(PCI_VENDOR_ID_IOMEGA, PCI_DEVICE_ID_IOMEGA_BUZ, BUZ), + ZR_DEVICE(PCI_ANY_ID, PCI_ANY_ID, NUM_CARDS), + {0} +}; +MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl); -int zoran_num; /* number of Buzs in use */ -struct zoran *zoran[BUZ_MAX]; +static unsigned int zoran_num; /* number of cards found */ /* videocodec bus functions ZR36060 */ static u32 @@ -472,8 +484,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { }, { .type = DC10plus, .name = "DC10plus", - .vendor_id = PCI_VENDOR_ID_MIRO, - .device_id = PCI_DEVICE_ID_MIRO_DC10PLUS, .i2c_decoder = I2C_DRIVERID_SAA7110, .i2c_encoder = I2C_DRIVERID_ADV7175, .video_codec = CODEC_TYPE_ZR36060, @@ -531,8 +541,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { }, { .type = DC30plus, .name = "DC30plus", - .vendor_id = PCI_VENDOR_ID_MIRO, - .device_id = PCI_DEVICE_ID_MIRO_DC30PLUS, .i2c_decoder = I2C_DRIVERID_VPX3220, .i2c_encoder = I2C_DRIVERID_ADV7175, .video_codec = CODEC_TYPE_ZR36050, @@ -589,8 +597,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { }, { .type = LML33R10, .name = "LML33R10", - .vendor_id = PCI_VENDOR_ID_ELECTRONICDESIGNGMBH, - .device_id = PCI_DEVICE_ID_LML_33R10, .i2c_decoder = I2C_DRIVERID_SAA7114, .i2c_encoder = I2C_DRIVERID_ADV7170, .video_codec = CODEC_TYPE_ZR36060, @@ -618,8 +624,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { }, { .type = BUZ, .name = "Buz", - .vendor_id = PCI_VENDOR_ID_IOMEGA, - .device_id = PCI_DEVICE_ID_IOMEGA_BUZ, .i2c_decoder = I2C_DRIVERID_SAA7111A, .i2c_encoder = I2C_DRIVERID_SAA7185B, .video_codec = CODEC_TYPE_ZR36060, @@ -649,8 +653,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .name = "6-Eyes", /* AverMedia chose not to brand the 6-Eyes. Thus it can't be autodetected, and requires card=x. */ - .vendor_id = -1, - .device_id = -1, .i2c_decoder = I2C_DRIVERID_KS0127, .i2c_encoder = I2C_DRIVERID_BT866, .video_codec = CODEC_TYPE_ZR36060, @@ -1138,7 +1140,8 @@ zr36057_init (struct zoran *zr) strcpy(zr->video_dev->name, ZR_DEVNAME(zr)); err = video_register_device(zr->video_dev, VFL_TYPE_GRABBER, video_nr[zr->id]); if (err < 0) - goto exit_unregister; + goto exit_free; + video_set_drvdata(zr->video_dev, zr); zoran_init_hardware(zr); if (zr36067_debug > 2) @@ -1153,19 +1156,19 @@ zr36057_init (struct zoran *zr) zr->initialized = 1; return 0; -exit_unregister: - zoran_unregister_i2c(zr); exit_free: kfree(zr->stat_com); kfree(zr->video_dev); return err; } -static void -zoran_release (struct zoran *zr) +static void __devexit zoran_remove(struct pci_dev *pdev) { + struct zoran *zr = pci_get_drvdata(pdev); + if (!zr->initialized) goto exit_free; + /* unregister videocodec bus */ if (zr->codec) { struct videocodec_master *master = zr->codec->master_data; @@ -1194,6 +1197,7 @@ zoran_release (struct zoran *zr) pci_disable_device(zr->pci_dev); video_unregister_device(zr->video_dev); exit_free: + pci_set_drvdata(pdev, NULL); kfree(zr); } @@ -1256,338 +1260,329 @@ zoran_setup_videocodec (struct zoran *zr, * Scan for a Buz card (actually for the PCI controller ZR36057), * request the irq and map the io memory */ -static int __devinit -find_zr36057 (void) +static int __devinit zoran_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) { unsigned char latency, need_latency; struct zoran *zr; - struct pci_dev *dev = NULL; int result; struct videocodec_master *master_vfe = NULL; struct videocodec_master *master_codec = NULL; int card_num; char *i2c_enc_name, *i2c_dec_name, *codec_name, *vfe_name; + unsigned int nr; - zoran_num = 0; - while (zoran_num < BUZ_MAX && - (dev = pci_get_device(PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057, dev)) != NULL) { - card_num = card[zoran_num]; - zr = kzalloc(sizeof(struct zoran), GFP_KERNEL); - if (!zr) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - kzalloc failed\n", - ZORAN_NAME); - continue; - } - zr->pci_dev = dev; - //zr->zr36057_mem = NULL; - zr->id = zoran_num; - snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id); - spin_lock_init(&zr->spinlock); - mutex_init(&zr->resource_lock); - if (pci_enable_device(dev)) - goto zr_free_mem; - zr->zr36057_adr = pci_resource_start(zr->pci_dev, 0); - pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, - &zr->revision); - if (zr->revision < 2) { - dprintk(1, - KERN_INFO - "%s: Zoran ZR36057 (rev %d) irq: %d, memory: 0x%08x.\n", - ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, - zr->zr36057_adr); - if (card_num == -1) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - no card specified, please use the card=X insmod option\n", - ZR_DEVNAME(zr)); - goto zr_free_mem; - } - } else { - int i; - unsigned short ss_vendor, ss_device; + nr = zoran_num++; + if (nr >= BUZ_MAX) { + dprintk(1, + KERN_ERR + "%s: driver limited to %d card(s) maximum\n", + ZORAN_NAME, BUZ_MAX); + return -ENOENT; + } - ss_vendor = zr->pci_dev->subsystem_vendor; - ss_device = zr->pci_dev->subsystem_device; + zr = kzalloc(sizeof(struct zoran), GFP_KERNEL); + if (!zr) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - kzalloc failed\n", + ZORAN_NAME); + return -ENOMEM; + } + zr->pci_dev = pdev; + zr->id = nr; + snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id); + spin_lock_init(&zr->spinlock); + mutex_init(&zr->resource_lock); + if (pci_enable_device(pdev)) + goto zr_free_mem; + pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, &zr->revision); + + dprintk(1, + KERN_INFO + "%s: Zoran ZR360%c7 (rev %d), irq: %d, memory: 0x%08llx\n", + ZR_DEVNAME(zr), zr->revision < 2 ? '5' : '6', zr->revision, + zr->pci_dev->irq, (uint64_t)pci_resource_start(zr->pci_dev, 0)); + if (zr->revision >= 2) { + dprintk(1, + KERN_INFO + "%s: Subsystem vendor=0x%04x id=0x%04x\n", + ZR_DEVNAME(zr), zr->pci_dev->subsystem_vendor, + zr->pci_dev->subsystem_device); + } + + /* Use auto-detected card type? */ + if (card[nr] == -1) { + if (zr->revision < 2) { dprintk(1, - KERN_INFO - "%s: Zoran ZR36067 (rev %d) irq: %d, memory: 0x%08x\n", - ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, - zr->zr36057_adr); + KERN_ERR + "%s: No card type specified, please use the card=X module parameter\n", + ZR_DEVNAME(zr)); dprintk(1, - KERN_INFO - "%s: subsystem vendor=0x%04x id=0x%04x\n", - ZR_DEVNAME(zr), ss_vendor, ss_device); - if (card_num == -1) { - dprintk(3, - KERN_DEBUG - "%s: find_zr36057() - trying to autodetect card type\n", - ZR_DEVNAME(zr)); - for (i=0;i<NUM_CARDS;i++) { - if (ss_vendor == zoran_cards[i].vendor_id && - ss_device == zoran_cards[i].device_id) { - dprintk(3, - KERN_DEBUG - "%s: find_zr36057() - card %s detected\n", - ZR_DEVNAME(zr), - zoran_cards[i].name); - card_num = i; - break; - } - } - if (i == NUM_CARDS) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - unknown card\n", - ZR_DEVNAME(zr)); - goto zr_free_mem; - } - } - } - - if (card_num < 0 || card_num >= NUM_CARDS) { - dprintk(2, KERN_ERR - "%s: find_zr36057() - invalid cardnum %d\n", - ZR_DEVNAME(zr), card_num); + "%s: It is not possible to auto-detect ZR36057 based cards\n", + ZR_DEVNAME(zr)); goto zr_free_mem; } - /* even though we make this a non pointer and thus - * theoretically allow for making changes to this struct - * on a per-individual card basis at runtime, this is - * strongly discouraged. This structure is intended to - * keep general card information, no settings or anything */ - zr->card = zoran_cards[card_num]; - snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), - "%s[%u]", zr->card.name, zr->id); - - zr->zr36057_mem = ioremap_nocache(zr->zr36057_adr, 0x1000); - if (!zr->zr36057_mem) { + card_num = ent->driver_data; + if (card_num >= NUM_CARDS) { dprintk(1, KERN_ERR - "%s: find_zr36057() - ioremap failed\n", + "%s: Unknown card, try specifying card=X module parameter\n", ZR_DEVNAME(zr)); goto zr_free_mem; } - - result = request_irq(zr->pci_dev->irq, - zoran_irq, - IRQF_SHARED | IRQF_DISABLED, - ZR_DEVNAME(zr), - (void *) zr); - if (result < 0) { - if (result == -EINVAL) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - bad irq number or handler\n", - ZR_DEVNAME(zr)); - } else if (result == -EBUSY) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - IRQ %d busy, change your PnP config in BIOS\n", - ZR_DEVNAME(zr), zr->pci_dev->irq); - } else { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - can't assign irq, error code %d\n", - ZR_DEVNAME(zr), result); - } - goto zr_unmap; - } - - /* set PCI latency timer */ - pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER, - &latency); - need_latency = zr->revision > 1 ? 32 : 48; - if (latency != need_latency) { - dprintk(2, - KERN_INFO - "%s: Changing PCI latency from %d to %d.\n", - ZR_DEVNAME(zr), latency, need_latency); - pci_write_config_byte(zr->pci_dev, - PCI_LATENCY_TIMER, - need_latency); + dprintk(3, + KERN_DEBUG + "%s: %s() - card %s detected\n", + ZR_DEVNAME(zr), __func__, zoran_cards[card_num].name); + } else { + card_num = card[nr]; + if (card_num >= NUM_CARDS || card_num < 0) { + dprintk(1, + KERN_ERR + "%s: User specified card type %d out of range (0 .. %d)\n", + ZR_DEVNAME(zr), card_num, NUM_CARDS - 1); + goto zr_free_mem; } + } - zr36057_restart(zr); - /* i2c */ - dprintk(2, KERN_INFO "%s: Initializing i2c bus...\n", - ZR_DEVNAME(zr)); + /* even though we make this a non pointer and thus + * theoretically allow for making changes to this struct + * on a per-individual card basis at runtime, this is + * strongly discouraged. This structure is intended to + * keep general card information, no settings or anything */ + zr->card = zoran_cards[card_num]; + snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), + "%s[%u]", zr->card.name, zr->id); + + zr->zr36057_mem = pci_ioremap_bar(zr->pci_dev, 0); + if (!zr->zr36057_mem) { + dprintk(1, + KERN_ERR + "%s: %s() - ioremap failed\n", + ZR_DEVNAME(zr), __func__); + goto zr_free_mem; + } - /* i2c decoder */ - if (decoder[zr->id] != -1) { - i2c_dec_name = i2cid_to_modulename(decoder[zr->id]); - zr->card.i2c_decoder = decoder[zr->id]; - } else if (zr->card.i2c_decoder != 0) { - i2c_dec_name = - i2cid_to_modulename(zr->card.i2c_decoder); + result = request_irq(zr->pci_dev->irq, zoran_irq, + IRQF_SHARED | IRQF_DISABLED, ZR_DEVNAME(zr), zr); + if (result < 0) { + if (result == -EINVAL) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - bad irq number or handler\n", + ZR_DEVNAME(zr)); + } else if (result == -EBUSY) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - IRQ %d busy, change your PnP config in BIOS\n", + ZR_DEVNAME(zr), zr->pci_dev->irq); } else { - i2c_dec_name = NULL; + dprintk(1, + KERN_ERR + "%s: find_zr36057() - can't assign irq, error code %d\n", + ZR_DEVNAME(zr), result); } + goto zr_unmap; + } - if (i2c_dec_name) { - if ((result = request_module(i2c_dec_name)) < 0) { - dprintk(1, - KERN_ERR - "%s: failed to load module %s: %d\n", - ZR_DEVNAME(zr), i2c_dec_name, result); - } - } + /* set PCI latency timer */ + pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER, + &latency); + need_latency = zr->revision > 1 ? 32 : 48; + if (latency != need_latency) { + dprintk(2, + KERN_INFO + "%s: Changing PCI latency from %d to %d\n", + ZR_DEVNAME(zr), latency, need_latency); + pci_write_config_byte(zr->pci_dev, PCI_LATENCY_TIMER, + need_latency); + } - /* i2c encoder */ - if (encoder[zr->id] != -1) { - i2c_enc_name = i2cid_to_modulename(encoder[zr->id]); - zr->card.i2c_encoder = encoder[zr->id]; - } else if (zr->card.i2c_encoder != 0) { - i2c_enc_name = - i2cid_to_modulename(zr->card.i2c_encoder); - } else { - i2c_enc_name = NULL; - } + zr36057_restart(zr); + /* i2c */ + dprintk(2, KERN_INFO "%s: Initializing i2c bus...\n", + ZR_DEVNAME(zr)); + + /* i2c decoder */ + if (decoder[zr->id] != -1) { + i2c_dec_name = i2cid_to_modulename(decoder[zr->id]); + zr->card.i2c_decoder = decoder[zr->id]; + } else if (zr->card.i2c_decoder != 0) { + i2c_dec_name = i2cid_to_modulename(zr->card.i2c_decoder); + } else { + i2c_dec_name = NULL; + } - if (i2c_enc_name) { - if ((result = request_module(i2c_enc_name)) < 0) { - dprintk(1, - KERN_ERR - "%s: failed to load module %s: %d\n", - ZR_DEVNAME(zr), i2c_enc_name, result); - } + if (i2c_dec_name) { + result = request_module(i2c_dec_name); + if (result < 0) { + dprintk(1, + KERN_ERR + "%s: failed to load module %s: %d\n", + ZR_DEVNAME(zr), i2c_dec_name, result); } + } + + /* i2c encoder */ + if (encoder[zr->id] != -1) { + i2c_enc_name = i2cid_to_modulename(encoder[zr->id]); + zr->card.i2c_encoder = encoder[zr->id]; + } else if (zr->card.i2c_encoder != 0) { + i2c_enc_name = i2cid_to_modulename(zr->card.i2c_encoder); + } else { + i2c_enc_name = NULL; + } - if (zoran_register_i2c(zr) < 0) { + if (i2c_enc_name) { + result = request_module(i2c_enc_name); + if (result < 0) { dprintk(1, KERN_ERR - "%s: find_zr36057() - can't initialize i2c bus\n", - ZR_DEVNAME(zr)); - goto zr_free_irq; + "%s: failed to load module %s: %d\n", + ZR_DEVNAME(zr), i2c_enc_name, result); } + } - dprintk(2, - KERN_INFO "%s: Initializing videocodec bus...\n", + if (zoran_register_i2c(zr) < 0) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - can't initialize i2c bus\n", ZR_DEVNAME(zr)); + goto zr_free_irq; + } - if (zr->card.video_codec != 0 && - (codec_name = - codecid_to_modulename(zr->card.video_codec)) != NULL) { - if ((result = request_module(codec_name)) < 0) { + dprintk(2, + KERN_INFO "%s: Initializing videocodec bus...\n", + ZR_DEVNAME(zr)); + + if (zr->card.video_codec) { + codec_name = codecid_to_modulename(zr->card.video_codec); + if (codec_name) { + result = request_module(codec_name); + if (result) { dprintk(1, KERN_ERR "%s: failed to load modules %s: %d\n", ZR_DEVNAME(zr), codec_name, result); } } - if (zr->card.video_vfe != 0 && - (vfe_name = - codecid_to_modulename(zr->card.video_vfe)) != NULL) { - if ((result = request_module(vfe_name)) < 0) { + } + if (zr->card.video_vfe) { + vfe_name = codecid_to_modulename(zr->card.video_vfe); + if (vfe_name) { + result = request_module(vfe_name); + if (result < 0) { dprintk(1, KERN_ERR "%s: failed to load modules %s: %d\n", ZR_DEVNAME(zr), vfe_name, result); } } + } - /* reset JPEG codec */ - jpeg_codec_sleep(zr, 1); - jpeg_codec_reset(zr); - /* video bus enabled */ - /* display codec revision */ - if (zr->card.video_codec != 0) { - master_codec = zoran_setup_videocodec(zr, - zr->card.video_codec); - if (!master_codec) - goto zr_unreg_i2c; - zr->codec = videocodec_attach(master_codec); - if (!zr->codec) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - no codec found\n", - ZR_DEVNAME(zr)); - goto zr_free_codec; - } - if (zr->codec->type != zr->card.video_codec) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - wrong codec\n", - ZR_DEVNAME(zr)); - goto zr_detach_codec; - } + /* reset JPEG codec */ + jpeg_codec_sleep(zr, 1); + jpeg_codec_reset(zr); + /* video bus enabled */ + /* display codec revision */ + if (zr->card.video_codec != 0) { + master_codec = zoran_setup_videocodec(zr, zr->card.video_codec); + if (!master_codec) + goto zr_unreg_i2c; + zr->codec = videocodec_attach(master_codec); + if (!zr->codec) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - no codec found\n", + ZR_DEVNAME(zr)); + goto zr_free_codec; } - if (zr->card.video_vfe != 0) { - master_vfe = zoran_setup_videocodec(zr, - zr->card.video_vfe); - if (!master_vfe) - goto zr_detach_codec; - zr->vfe = videocodec_attach(master_vfe); - if (!zr->vfe) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - no VFE found\n", - ZR_DEVNAME(zr)); - goto zr_free_vfe; - } - if (zr->vfe->type != zr->card.video_vfe) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() = wrong VFE\n", - ZR_DEVNAME(zr)); - goto zr_detach_vfe; - } + if (zr->codec->type != zr->card.video_codec) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - wrong codec\n", + ZR_DEVNAME(zr)); + goto zr_detach_codec; + } + } + if (zr->card.video_vfe != 0) { + master_vfe = zoran_setup_videocodec(zr, zr->card.video_vfe); + if (!master_vfe) + goto zr_detach_codec; + zr->vfe = videocodec_attach(master_vfe); + if (!zr->vfe) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - no VFE found\n", + ZR_DEVNAME(zr)); + goto zr_free_vfe; + } + if (zr->vfe->type != zr->card.video_vfe) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() = wrong VFE\n", + ZR_DEVNAME(zr)); + goto zr_detach_vfe; } - /* Success so keep the pci_dev referenced */ - pci_dev_get(zr->pci_dev); - zoran[zoran_num++] = zr; - continue; - - // Init errors - zr_detach_vfe: - videocodec_detach(zr->vfe); - zr_free_vfe: - kfree(master_vfe); - zr_detach_codec: - videocodec_detach(zr->codec); - zr_free_codec: - kfree(master_codec); - zr_unreg_i2c: - zoran_unregister_i2c(zr); - zr_free_irq: - btwrite(0, ZR36057_SPGPPCR); - free_irq(zr->pci_dev->irq, zr); - zr_unmap: - iounmap(zr->zr36057_mem); - zr_free_mem: - kfree(zr); - continue; } - if (dev) /* Clean up ref count on early exit */ - pci_dev_put(dev); - if (zoran_num == 0) { - dprintk(1, KERN_INFO "No known MJPEG cards found.\n"); + /* take care of Natoma chipset and a revision 1 zr36057 */ + if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) { + zr->jpg_buffers.need_contiguous = 1; + dprintk(1, + KERN_INFO + "%s: ZR36057/Natoma bug, max. buffer size is 128K\n", + ZR_DEVNAME(zr)); } - return zoran_num; + + if (zr36057_init(zr) < 0) + goto zr_detach_vfe; + + zoran_proc_init(zr); + + pci_set_drvdata(pdev, zr); + + return 0; + +zr_detach_vfe: + videocodec_detach(zr->vfe); +zr_free_vfe: + kfree(master_vfe); +zr_detach_codec: + videocodec_detach(zr->codec); +zr_free_codec: + kfree(master_codec); +zr_unreg_i2c: + zoran_unregister_i2c(zr); +zr_free_irq: + btwrite(0, ZR36057_SPGPPCR); + free_irq(zr->pci_dev->irq, zr); +zr_unmap: + iounmap(zr->zr36057_mem); +zr_free_mem: + kfree(zr); + + return -ENODEV; } -static int __init -init_dc10_cards (void) +static struct pci_driver zoran_driver = { + .name = "zr36067", + .id_table = zr36067_pci_tbl, + .probe = zoran_probe, + .remove = zoran_remove, +}; + +static int __init zoran_init(void) { - int i; + int res; - memset(zoran, 0, sizeof(zoran)); printk(KERN_INFO "Zoran MJPEG board driver version %d.%d.%d\n", MAJOR_VERSION, MINOR_VERSION, RELEASE_VERSION); - /* Look for cards */ - if (find_zr36057() < 0) { - return -EIO; - } - if (zoran_num == 0) - return -ENODEV; - dprintk(1, KERN_INFO "%s: %d card(s) found\n", ZORAN_NAME, - zoran_num); /* check the parameters we have been given, adjust if necessary */ if (v4l_nbufs < 2) v4l_nbufs = 2; @@ -1629,37 +1624,22 @@ init_dc10_cards (void) ZORAN_NAME); } - /* take care of Natoma chipset and a revision 1 zr36057 */ - for (i = 0; i < zoran_num; i++) { - struct zoran *zr = zoran[i]; - - if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) { - zr->jpg_buffers.need_contiguous = 1; - dprintk(1, - KERN_INFO - "%s: ZR36057/Natoma bug, max. buffer size is 128K\n", - ZR_DEVNAME(zr)); - } - - if (zr36057_init(zr) < 0) { - for (i = 0; i < zoran_num; i++) - zoran_release(zoran[i]); - return -EIO; - } - zoran_proc_init(zr); + res = pci_register_driver(&zoran_driver); + if (res) { + dprintk(1, + KERN_ERR + "%s: Unable to register ZR36057 driver\n", + ZORAN_NAME); + return res; } return 0; } -static void __exit -unload_dc10_cards (void) +static void __exit zoran_exit(void) { - int i; - - for (i = 0; i < zoran_num; i++) - zoran_release(zoran[i]); + pci_unregister_driver(&zoran_driver); } -module_init(init_dc10_cards); -module_exit(unload_dc10_cards); +module_init(zoran_init); +module_exit(zoran_exit); diff --git a/drivers/media/video/zoran/zoran_card.h b/drivers/media/video/zoran/zoran_card.h index e4dc9d29b404..4507bdc5e338 100644 --- a/drivers/media/video/zoran/zoran_card.h +++ b/drivers/media/video/zoran/zoran_card.h @@ -40,8 +40,6 @@ extern int zr36067_debug; /* Anybody who uses more than four? */ #define BUZ_MAX 4 -extern int zoran_num; -extern struct zoran *zoran[BUZ_MAX]; extern struct video_device zoran_template; diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index b58b9dda715c..120ef235e63d 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -1196,83 +1196,54 @@ zoran_close_end_session (struct file *file) * Open a zoran card. Right now the flags stuff is just playing */ -static int -zoran_open(struct file *file) +static int zoran_open(struct file *file) { - unsigned int minor = video_devdata(file)->minor; - struct zoran *zr = NULL; + struct zoran *zr = video_drvdata(file); struct zoran_fh *fh; - int i, res, first_open = 0, have_module_locks = 0; + int res, first_open = 0; - lock_kernel(); - /* find the device */ - for (i = 0; i < zoran_num; i++) { - if (zoran[i]->video_dev->minor == minor) { - zr = zoran[i]; - break; - } - } + dprintk(2, KERN_INFO "%s: zoran_open(%s, pid=[%d]), users(-)=%d\n", + ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user + 1); - if (!zr) { - dprintk(1, KERN_ERR "%s: device not found!\n", ZORAN_NAME); - res = -ENODEV; - goto open_unlock_and_return; - } + lock_kernel(); /* see fs/device.c - the kernel already locks during open(), * so locking ourselves only causes deadlocks */ /*mutex_lock(&zr->resource_lock);*/ + if (zr->user >= 2048) { + dprintk(1, KERN_ERR "%s: too many users (%d) on device\n", + ZR_DEVNAME(zr), zr->user); + res = -EBUSY; + goto fail_unlock; + } + if (!zr->decoder) { dprintk(1, KERN_ERR "%s: no TV decoder loaded for device!\n", ZR_DEVNAME(zr)); res = -EIO; - goto open_unlock_and_return; + goto fail_unlock; } - /* try to grab a module lock */ - if (!try_module_get(THIS_MODULE)) { - dprintk(1, - KERN_ERR - "%s: failed to acquire my own lock! PANIC!\n", - ZR_DEVNAME(zr)); - res = -ENODEV; - goto open_unlock_and_return; - } if (!try_module_get(zr->decoder->driver->driver.owner)) { dprintk(1, KERN_ERR - "%s: failed to grab ownership of i2c decoder\n", + "%s: failed to grab ownership of video decoder\n", ZR_DEVNAME(zr)); res = -EIO; - module_put(THIS_MODULE); - goto open_unlock_and_return; + goto fail_unlock; } if (zr->encoder && !try_module_get(zr->encoder->driver->driver.owner)) { dprintk(1, KERN_ERR - "%s: failed to grab ownership of i2c encoder\n", + "%s: failed to grab ownership of video encoder\n", ZR_DEVNAME(zr)); res = -EIO; - module_put(zr->decoder->driver->driver.owner); - module_put(THIS_MODULE); - goto open_unlock_and_return; + goto fail_decoder; } - have_module_locks = 1; - - if (zr->user >= 2048) { - dprintk(1, KERN_ERR "%s: too many users (%d) on device\n", - ZR_DEVNAME(zr), zr->user); - res = -EBUSY; - goto open_unlock_and_return; - } - - dprintk(1, KERN_INFO "%s: zoran_open(%s, pid=[%d]), users(-)=%d\n", - ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user); - /* now, create the open()-specific file_ops struct */ fh = kzalloc(sizeof(struct zoran_fh), GFP_KERNEL); if (!fh) { @@ -1281,7 +1252,7 @@ zoran_open(struct file *file) "%s: zoran_open() - allocation of zoran_fh failed\n", ZR_DEVNAME(zr)); res = -ENOMEM; - goto open_unlock_and_return; + goto fail_encoder; } /* used to be BUZ_MAX_WIDTH/HEIGHT, but that gives overflows * on norm-change! */ @@ -1292,9 +1263,8 @@ zoran_open(struct file *file) KERN_ERR "%s: zoran_open() - allocation of overlay_mask failed\n", ZR_DEVNAME(zr)); - kfree(fh); res = -ENOMEM; - goto open_unlock_and_return; + goto fail_fh; } if (zr->user++ == 0) @@ -1319,22 +1289,19 @@ zoran_open(struct file *file) return 0; -open_unlock_and_return: - /* if we grabbed locks, release them accordingly */ - if (have_module_locks) { - module_put(zr->decoder->driver->driver.owner); - if (zr->encoder) { - module_put(zr->encoder->driver->driver.owner); - } - module_put(THIS_MODULE); - } - - /* if there's no device found, we didn't obtain the lock either */ - if (zr) { - /*mutex_unlock(&zr->resource_lock);*/ - } +fail_fh: + kfree(fh); +fail_encoder: + if (zr->encoder) + module_put(zr->encoder->driver->driver.owner); +fail_decoder: + module_put(zr->decoder->driver->driver.owner); +fail_unlock: unlock_kernel(); + dprintk(2, KERN_INFO "%s: open failed (%d), users(-)=%d\n", + ZR_DEVNAME(zr), res, zr->user); + return res; } @@ -1344,8 +1311,8 @@ zoran_close(struct file *file) struct zoran_fh *fh = file->private_data; struct zoran *zr = fh->zr; - dprintk(1, KERN_INFO "%s: zoran_close(%s, pid=[%d]), users(+)=%d\n", - ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user); + dprintk(2, KERN_INFO "%s: zoran_close(%s, pid=[%d]), users(+)=%d\n", + ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user - 1); /* kernel locks (fs/device.c), so don't do that ourselves * (prevents deadlocks) */ @@ -1391,10 +1358,8 @@ zoran_close(struct file *file) /* release locks on the i2c modules */ module_put(zr->decoder->driver->driver.owner); - if (zr->encoder) { - module_put(zr->encoder->driver->driver.owner); - } - module_put(THIS_MODULE); + if (zr->encoder) + module_put(zr->encoder->driver->driver.owner); /*mutex_unlock(&zr->resource_lock);*/ diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index 24508e28e3fb..ea9488e7ad6d 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -626,7 +626,6 @@ static int __devinit pcf50633_probe(struct i2c_client *client, } if (client->irq) { - set_irq_handler(client->irq, handle_level_irq); ret = request_irq(client->irq, pcf50633_irq, IRQF_TRIGGER_LOW, "pcf50633", pcf); diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 56073199ceba..1c484084ed4f 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -162,7 +162,7 @@ config ENCLOSURE_SERVICES config SGI_XP tristate "Support communication between SGI SSIs" depends on NET - depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_64) && SMP + depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select SGI_GRU if (IA64_GENERIC || IA64_SGI_UV || X86_64) && SMP @@ -189,7 +189,7 @@ config HP_ILO config SGI_GRU tristate "SGI GRU driver" - depends on (X86_64 || IA64_SGI_UV || IA64_GENERIC) && SMP + depends on (X86_UV || IA64_SGI_UV || IA64_GENERIC) && SMP default n select MMU_NOTIFIER ---help--- @@ -217,6 +217,7 @@ config DELL_LAPTOP depends on EXPERIMENTAL depends on BACKLIGHT_CLASS_DEVICE depends on RFKILL + depends on POWER_SUPPLY default n ---help--- This driver adds support for rfkill and backlight control to Dell diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c index bf5e4d065436..558bf3f2c276 100644 --- a/drivers/misc/atmel-ssc.c +++ b/drivers/misc/atmel-ssc.c @@ -35,7 +35,7 @@ struct ssc_device *ssc_request(unsigned int ssc_num) if (!ssc_valid) { spin_unlock(&user_lock); - dev_dbg(&ssc->pdev->dev, "could not find requested device\n"); + pr_err("ssc: ssc%d platform device is missing\n", ssc_num); return ERR_PTR(-ENODEV); } diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c index 05e298289238..f26667a7abf7 100644 --- a/drivers/misc/hpilo.c +++ b/drivers/misc/hpilo.c @@ -207,7 +207,7 @@ static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data) &device_ccb->recv_ctrl); /* give iLO some time to process stop request */ - for (retries = 1000; retries > 0; retries--) { + for (retries = MAX_WAIT; retries > 0; retries--) { doorbell_set(driver_ccb); udelay(1); if (!(ioread32(&device_ccb->send_ctrl) & (1 << CTRL_BITPOS_A)) @@ -309,7 +309,7 @@ static int ilo_ccb_open(struct ilo_hwinfo *hw, struct ccb_data *data, int slot) doorbell_clr(driver_ccb); /* make sure iLO is really handling requests */ - for (i = 1000; i > 0; i--) { + for (i = MAX_WAIT; i > 0; i--) { if (ilo_pkt_dequeue(hw, driver_ccb, SENDQ, &pkt_id, NULL, NULL)) break; udelay(1); @@ -326,7 +326,7 @@ static int ilo_ccb_open(struct ilo_hwinfo *hw, struct ccb_data *data, int slot) return 0; free: - pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa); + ilo_ccb_close(pdev, data); out: return error; } @@ -758,7 +758,7 @@ static void __exit ilo_exit(void) class_destroy(ilo_class); } -MODULE_VERSION("0.05"); +MODULE_VERSION("0.06"); MODULE_ALIAS(ILO_NAME); MODULE_DESCRIPTION(ILO_NAME); MODULE_AUTHOR("David Altobelli <david.altobelli@hp.com>"); diff --git a/drivers/misc/hpilo.h b/drivers/misc/hpilo.h index a281207696c1..b64a20ef07e3 100644 --- a/drivers/misc/hpilo.h +++ b/drivers/misc/hpilo.h @@ -19,6 +19,8 @@ #define MAX_ILO_DEV 1 /* max number of files */ #define MAX_OPEN (MAX_CCB * MAX_ILO_DEV) +/* spin counter for open/close delay */ +#define MAX_WAIT 10000 /* * Per device, used to track global memory allocations. diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 650983806392..c67e4e8bd62c 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -36,23 +36,11 @@ #include <linux/interrupt.h> #include <linux/proc_fs.h> #include <linux/uaccess.h> +#include <asm/uv/uv.h> #include "gru.h" #include "grulib.h" #include "grutables.h" -#if defined CONFIG_X86_64 -#include <asm/genapic.h> -#include <asm/irq.h> -#define IS_UV() is_uv_system() -#elif defined CONFIG_IA64 -#include <asm/system.h> -#include <asm/sn/simulator.h> -/* temp support for running on hardware simulator */ -#define IS_UV() IS_MEDUSA() || ia64_platform_is("uv") -#else -#define IS_UV() 0 -#endif - #include <asm/uv/uv_hub.h> #include <asm/uv/uv_mmrs.h> @@ -381,7 +369,7 @@ static int __init gru_init(void) char id[10]; void *gru_start_vaddr; - if (!IS_UV()) + if (!is_uv_system()) return 0; #if defined CONFIG_IA64 @@ -451,7 +439,7 @@ static void __exit gru_exit(void) int order = get_order(sizeof(struct gru_state) * GRU_CHIPLETS_PER_BLADE); - if (!IS_UV()) + if (!is_uv_system()) return; for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++) diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 7b4cbd5e03e9..2275126cb334 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -15,19 +15,19 @@ #include <linux/mutex.h> -#ifdef CONFIG_IA64 +#if defined CONFIG_X86_UV || defined CONFIG_IA64_SGI_UV +#include <asm/uv/uv.h> +#define is_uv() is_uv_system() +#endif + +#ifndef is_uv +#define is_uv() 0 +#endif + +#if defined CONFIG_IA64 #include <asm/system.h> #include <asm/sn/arch.h> /* defines is_shub1() and is_shub2() */ #define is_shub() ia64_platform_is("sn2") -#ifdef CONFIG_IA64_SGI_UV -#define is_uv() ia64_platform_is("uv") -#else -#define is_uv() 0 -#endif -#endif -#ifdef CONFIG_X86_64 -#include <asm/genapic.h> -#define is_uv() is_uv_system() #endif #ifndef is_shub1 @@ -42,10 +42,6 @@ #define is_shub() 0 #endif -#ifndef is_uv -#define is_uv() 0 -#endif - #ifdef USE_DBUG_ON #define DBUG_ON(condition) BUG_ON(condition) #else diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index a5bd658c2e83..275b78896a73 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2004-2009 Silicon Graphics, Inc. All Rights Reserved. */ /* @@ -514,7 +514,8 @@ struct xpc_channel_uv { /* partition's notify mq */ struct xpc_send_msg_slot_uv *send_msg_slots; - struct xpc_notify_mq_msg_uv *recv_msg_slots; + void *recv_msg_slots; /* each slot will hold a xpc_notify_mq_msg_uv */ + /* structure plus the user's payload */ struct xpc_fifo_head_uv msg_slot_free_list; struct xpc_fifo_head_uv recv_msg_list; /* deliverable payloads */ diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 9cd2ebe2a3b6..45fd653dbe31 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -49,9 +49,6 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING)) return; - - DBUG_ON(ch->local_msgqueue == NULL); - DBUG_ON(ch->remote_msgqueue == NULL); } if (!(ch->flags & XPC_C_OPENREPLY)) { diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index 89218f7cfaa7..6576170de962 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -318,7 +318,7 @@ xpc_hb_checker(void *ignore) /* this thread was marked active by xpc_hb_init() */ - set_cpus_allowed_ptr(current, &cpumask_of_cpu(XPC_HB_CHECK_CPU)); + set_cpus_allowed_ptr(current, cpumask_of(XPC_HB_CHECK_CPU)); /* set our heartbeating to other partitions into motion */ xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ); diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 82fb9958f22f..2e975762c32b 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -1106,8 +1106,6 @@ xpc_process_activate_IRQ_rcvd_sn2(void) int n_IRQs_expected; int n_IRQs_detected; - DBUG_ON(xpc_activate_IRQ_rcvd == 0); - spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); n_IRQs_expected = xpc_activate_IRQ_rcvd; xpc_activate_IRQ_rcvd = 0; @@ -1726,6 +1724,7 @@ xpc_clear_local_msgqueue_flags_sn2(struct xpc_channel *ch) msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue + (get % ch->local_nentries) * ch->entry_size); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); msg->flags = 0; } while (++get < ch_sn2->remote_GP.get); } @@ -1740,11 +1739,18 @@ xpc_clear_remote_msgqueue_flags_sn2(struct xpc_channel *ch) struct xpc_msg_sn2 *msg; s64 put; - put = ch_sn2->w_remote_GP.put; + /* flags are zeroed when the buffer is allocated */ + if (ch_sn2->remote_GP.put < ch->remote_nentries) + return; + + put = max(ch_sn2->w_remote_GP.put, ch->remote_nentries); do { msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue + (put % ch->remote_nentries) * ch->entry_size); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); + DBUG_ON(!(msg->flags & XPC_M_SN2_DONE)); + DBUG_ON(msg->number != put - ch->remote_nentries); msg->flags = 0; } while (++put < ch_sn2->remote_GP.put); } @@ -1836,6 +1842,7 @@ xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number) */ xpc_clear_remote_msgqueue_flags_sn2(ch); + smp_wmb(); /* ensure flags have been cleared before bte_copy */ ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put; dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, " @@ -1934,7 +1941,7 @@ xpc_get_deliverable_payload_sn2(struct xpc_channel *ch) break; get = ch_sn2->w_local_GP.get; - rmb(); /* guarantee that .get loads before .put */ + smp_rmb(); /* guarantee that .get loads before .put */ if (get == ch_sn2->w_remote_GP.put) break; @@ -1956,11 +1963,13 @@ xpc_get_deliverable_payload_sn2(struct xpc_channel *ch) msg = xpc_pull_remote_msg_sn2(ch, get); - DBUG_ON(msg != NULL && msg->number != get); - DBUG_ON(msg != NULL && (msg->flags & XPC_M_SN2_DONE)); - DBUG_ON(msg != NULL && !(msg->flags & XPC_M_SN2_READY)); + if (msg != NULL) { + DBUG_ON(msg->number != get); + DBUG_ON(msg->flags & XPC_M_SN2_DONE); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); - payload = &msg->payload; + payload = &msg->payload; + } break; } @@ -2053,7 +2062,7 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, while (1) { put = ch_sn2->w_local_GP.put; - rmb(); /* guarantee that .put loads before .get */ + smp_rmb(); /* guarantee that .put loads before .get */ if (put - ch_sn2->w_remote_GP.get < ch->local_nentries) { /* There are available message entries. We need to try @@ -2186,7 +2195,7 @@ xpc_send_payload_sn2(struct xpc_channel *ch, u32 flags, void *payload, * The preceding store of msg->flags must occur before the following * load of local_GP->put. */ - mb(); + smp_mb(); /* see if the message is next in line to be sent, if so send it */ @@ -2277,8 +2286,9 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload) dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n", (void *)msg, msg_number, ch->partid, ch->number); - DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->entry_size) != + DBUG_ON((((u64)msg - (u64)ch->sn.sn2.remote_msgqueue) / ch->entry_size) != msg_number % ch->remote_nentries); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); DBUG_ON(msg->flags & XPC_M_SN2_DONE); msg->flags |= XPC_M_SN2_DONE; @@ -2287,7 +2297,7 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload) * The preceding store of msg->flags must occur before the following * load of local_GP->get. */ - mb(); + smp_mb(); /* * See if this message is next in line to be acknowledged as having diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 91a55b1b1037..29c0502a96b2 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2008-2009 Silicon Graphics, Inc. All Rights Reserved. */ /* @@ -1010,8 +1010,8 @@ xpc_allocate_recv_msg_slot_uv(struct xpc_channel *ch) continue; for (entry = 0; entry < nentries; entry++) { - msg_slot = ch_uv->recv_msg_slots + entry * - ch->entry_size; + msg_slot = ch_uv->recv_msg_slots + + entry * ch->entry_size; msg_slot->hdr.msg_slot_number = entry; } @@ -1308,9 +1308,8 @@ xpc_handle_notify_mq_msg_uv(struct xpc_partition *part, /* we're dealing with a normal message sent via the notify_mq */ ch_uv = &ch->sn.uv; - msg_slot = (struct xpc_notify_mq_msg_uv *)((u64)ch_uv->recv_msg_slots + - (msg->hdr.msg_slot_number % ch->remote_nentries) * - ch->entry_size); + msg_slot = ch_uv->recv_msg_slots + + (msg->hdr.msg_slot_number % ch->remote_nentries) * ch->entry_size; BUG_ON(msg->hdr.msg_slot_number != msg_slot->hdr.msg_slot_number); BUG_ON(msg_slot->hdr.size != 0); @@ -1423,7 +1422,7 @@ xpc_send_payload_uv(struct xpc_channel *ch, u32 flags, void *payload, atomic_inc(&ch->n_to_notify); msg_slot->key = key; - wmb(); /* a non-NULL func must hit memory after the key */ + smp_wmb(); /* a non-NULL func must hit memory after the key */ msg_slot->func = func; if (ch->flags & XPC_C_DISCONNECTING) { diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c index 7957f525b2f4..6faefcffcb53 100644 --- a/drivers/misc/sgi-xp/xpnet.c +++ b/drivers/misc/sgi-xp/xpnet.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1999-2008 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 1999-2009 Silicon Graphics, Inc. All rights reserved. */ /* @@ -551,6 +551,7 @@ xpnet_init(void) netif_carrier_off(xpnet_device); + xpnet_device->netdev_ops = &xpnet_netdev_ops; xpnet_device->mtu = XPNET_DEF_MTU; /* diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 0efa390978bd..99d4b28d52ed 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -145,6 +145,16 @@ config MMC_IMX If unsure, say N. +config MMC_MXC + tristate "Freescale i.MX2/3 Multimedia Card Interface support" + depends on ARCH_MXC + help + This selects the Freescale i.MX2/3 Multimedia card Interface. + If you have a i.MX platform with a Multimedia Card slot, + say Y or M here. + + If unsure, say N. + config MMC_TIFM_SD tristate "TI Flash Media MMC/SD Interface support (EXPERIMENTAL)" depends on EXPERIMENTAL && PCI diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 98cab84829b8..dedec55861d9 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -9,6 +9,7 @@ endif obj-$(CONFIG_MMC_ARMMMCI) += mmci.o obj-$(CONFIG_MMC_PXA) += pxamci.o obj-$(CONFIG_MMC_IMX) += imxmmc.o +obj-$(CONFIG_MMC_MXC) += mxcmmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 1bcbdd6763ac..2909bbc8ad00 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -430,6 +430,8 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) clk = 255; host->cclk = host->mclk / (2 * (clk + 1)); } + if (host->hw_designer == 0x80) + clk |= MCI_FCEN; /* Bug fix in ST IP block */ clk |= MCI_CLK_ENABLE; } @@ -440,15 +442,27 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_POWER_OFF: break; case MMC_POWER_UP: - pwr |= MCI_PWR_UP; - break; + /* The ST version does not have this, fall through to POWER_ON */ + if (host->hw_designer != 0x80) { + pwr |= MCI_PWR_UP; + break; + } case MMC_POWER_ON: pwr |= MCI_PWR_ON; break; } - if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) - pwr |= MCI_ROD; + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) { + if (host->hw_designer != 0x80) + pwr |= MCI_ROD; + else { + /* + * The ST Micro variant use the ROD bit for something + * else and only has OD (Open Drain). + */ + pwr |= MCI_OD; + } + } writel(clk, host->base + MMCICLOCK); @@ -500,6 +514,12 @@ static int mmci_probe(struct amba_device *dev, void *id) } host = mmc_priv(mmc); + /* Bits 12 thru 19 is the designer */ + host->hw_designer = (dev->periphid >> 12) & 0xff; + /* Bits 20 thru 23 is the revison */ + host->hw_revision = (dev->periphid >> 20) & 0xf; + DBG(host, "designer ID = 0x%02x\n", host->hw_designer); + DBG(host, "revision = 0x%01x\n", host->hw_revision); host->clk = clk_get(&dev->dev, NULL); if (IS_ERR(host->clk)) { ret = PTR_ERR(host->clk); @@ -693,6 +713,15 @@ static struct amba_id mmci_ids[] = { .id = 0x00041181, .mask = 0x000fffff, }, + /* ST Micro variants */ + { + .id = 0x00180180, + .mask = 0x00ffffff, + }, + { + .id = 0x00280180, + .mask = 0x00ffffff, + }, { 0, 0 }, }; diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 0f39c490f022..0441bac1c0ec 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -11,13 +11,23 @@ #define MCI_PWR_OFF 0x00 #define MCI_PWR_UP 0x02 #define MCI_PWR_ON 0x03 +#define MCI_DATA2DIREN (1 << 2) +#define MCI_CMDDIREN (1 << 3) +#define MCI_DATA0DIREN (1 << 4) +#define MCI_DATA31DIREN (1 << 5) #define MCI_OD (1 << 6) #define MCI_ROD (1 << 7) +/* The ST Micro version does not have ROD */ +#define MCI_FBCLKEN (1 << 7) +#define MCI_DATA74DIREN (1 << 8) #define MMCICLOCK 0x004 #define MCI_CLK_ENABLE (1 << 8) #define MCI_CLK_PWRSAVE (1 << 9) #define MCI_CLK_BYPASS (1 << 10) +#define MCI_WIDE_BUS (1 << 11) +/* HW flow control on the ST Micro version */ +#define MCI_FCEN (1 << 13) #define MMCIARGUMENT 0x008 #define MMCICOMMAND 0x00c @@ -26,6 +36,10 @@ #define MCI_CPSM_INTERRUPT (1 << 8) #define MCI_CPSM_PENDING (1 << 9) #define MCI_CPSM_ENABLE (1 << 10) +#define MCI_SDIO_SUSP (1 << 11) +#define MCI_ENCMD_COMPL (1 << 12) +#define MCI_NIEN (1 << 13) +#define MCI_CE_ATACMD (1 << 14) #define MMCIRESPCMD 0x010 #define MMCIRESPONSE0 0x014 @@ -39,6 +53,11 @@ #define MCI_DPSM_DIRECTION (1 << 1) #define MCI_DPSM_MODE (1 << 2) #define MCI_DPSM_DMAENABLE (1 << 3) +#define MCI_DPSM_BLOCKSIZE (1 << 4) +#define MCI_DPSM_RWSTART (1 << 8) +#define MCI_DPSM_RWSTOP (1 << 9) +#define MCI_DPSM_RWMOD (1 << 10) +#define MCI_DPSM_SDIOEN (1 << 11) #define MMCIDATACNT 0x030 #define MMCISTATUS 0x034 @@ -63,6 +82,8 @@ #define MCI_RXFIFOEMPTY (1 << 19) #define MCI_TXDATAAVLBL (1 << 20) #define MCI_RXDATAAVLBL (1 << 21) +#define MCI_SDIOIT (1 << 22) +#define MCI_CEATAEND (1 << 23) #define MMCICLEAR 0x038 #define MCI_CMDCRCFAILCLR (1 << 0) @@ -75,6 +96,8 @@ #define MCI_CMDSENTCLR (1 << 7) #define MCI_DATAENDCLR (1 << 8) #define MCI_DATABLOCKENDCLR (1 << 10) +#define MCI_SDIOITC (1 << 22) +#define MCI_CEATAENDC (1 << 23) #define MMCIMASK0 0x03c #define MCI_CMDCRCFAILMASK (1 << 0) @@ -98,6 +121,8 @@ #define MCI_RXFIFOEMPTYMASK (1 << 19) #define MCI_TXDATAAVLBLMASK (1 << 20) #define MCI_RXDATAAVLBLMASK (1 << 21) +#define MCI_SDIOITMASK (1 << 22) +#define MCI_CEATAENDMASK (1 << 23) #define MMCIMASK1 0x040 #define MMCIFIFOCNT 0x048 @@ -136,6 +161,9 @@ struct mmci_host { u32 pwr; struct mmc_platform_data *plat; + u8 hw_designer; + u8 hw_revision:4; + struct timer_list timer; unsigned int oldstat; diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c new file mode 100644 index 000000000000..dda0be4e25dc --- /dev/null +++ b/drivers/mmc/host/mxcmmc.c @@ -0,0 +1,880 @@ +/* + * linux/drivers/mmc/host/mxcmmc.c - Freescale i.MX MMCI driver + * + * This is a driver for the SDHC controller found in Freescale MX2/MX3 + * SoCs. It is basically the same hardware as found on MX1 (imxmmc.c). + * Unlike the hardware found on MX1, this hardware just works and does + * not need all the quirks found in imxmmc.c, hence the seperate driver. + * + * Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> + * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com> + * + * derived from pxamci.c by Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/blkdev.h> +#include <linux/dma-mapping.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <asm/dma.h> +#include <asm/irq.h> +#include <asm/sizes.h> +#include <mach/mmc.h> + +#ifdef CONFIG_ARCH_MX2 +#include <mach/dma-mx1-mx2.h> +#define HAS_DMA +#endif + +#define DRIVER_NAME "imx-mmc" + +#define MMC_REG_STR_STP_CLK 0x00 +#define MMC_REG_STATUS 0x04 +#define MMC_REG_CLK_RATE 0x08 +#define MMC_REG_CMD_DAT_CONT 0x0C +#define MMC_REG_RES_TO 0x10 +#define MMC_REG_READ_TO 0x14 +#define MMC_REG_BLK_LEN 0x18 +#define MMC_REG_NOB 0x1C +#define MMC_REG_REV_NO 0x20 +#define MMC_REG_INT_CNTR 0x24 +#define MMC_REG_CMD 0x28 +#define MMC_REG_ARG 0x2C +#define MMC_REG_RES_FIFO 0x34 +#define MMC_REG_BUFFER_ACCESS 0x38 + +#define STR_STP_CLK_RESET (1 << 3) +#define STR_STP_CLK_START_CLK (1 << 1) +#define STR_STP_CLK_STOP_CLK (1 << 0) + +#define STATUS_CARD_INSERTION (1 << 31) +#define STATUS_CARD_REMOVAL (1 << 30) +#define STATUS_YBUF_EMPTY (1 << 29) +#define STATUS_XBUF_EMPTY (1 << 28) +#define STATUS_YBUF_FULL (1 << 27) +#define STATUS_XBUF_FULL (1 << 26) +#define STATUS_BUF_UND_RUN (1 << 25) +#define STATUS_BUF_OVFL (1 << 24) +#define STATUS_SDIO_INT_ACTIVE (1 << 14) +#define STATUS_END_CMD_RESP (1 << 13) +#define STATUS_WRITE_OP_DONE (1 << 12) +#define STATUS_DATA_TRANS_DONE (1 << 11) +#define STATUS_READ_OP_DONE (1 << 11) +#define STATUS_WR_CRC_ERROR_CODE_MASK (3 << 10) +#define STATUS_CARD_BUS_CLK_RUN (1 << 8) +#define STATUS_BUF_READ_RDY (1 << 7) +#define STATUS_BUF_WRITE_RDY (1 << 6) +#define STATUS_RESP_CRC_ERR (1 << 5) +#define STATUS_CRC_READ_ERR (1 << 3) +#define STATUS_CRC_WRITE_ERR (1 << 2) +#define STATUS_TIME_OUT_RESP (1 << 1) +#define STATUS_TIME_OUT_READ (1 << 0) +#define STATUS_ERR_MASK 0x2f + +#define CMD_DAT_CONT_CMD_RESP_LONG_OFF (1 << 12) +#define CMD_DAT_CONT_STOP_READWAIT (1 << 11) +#define CMD_DAT_CONT_START_READWAIT (1 << 10) +#define CMD_DAT_CONT_BUS_WIDTH_4 (2 << 8) +#define CMD_DAT_CONT_INIT (1 << 7) +#define CMD_DAT_CONT_WRITE (1 << 4) +#define CMD_DAT_CONT_DATA_ENABLE (1 << 3) +#define CMD_DAT_CONT_RESPONSE_48BIT_CRC (1 << 0) +#define CMD_DAT_CONT_RESPONSE_136BIT (2 << 0) +#define CMD_DAT_CONT_RESPONSE_48BIT (3 << 0) + +#define INT_SDIO_INT_WKP_EN (1 << 18) +#define INT_CARD_INSERTION_WKP_EN (1 << 17) +#define INT_CARD_REMOVAL_WKP_EN (1 << 16) +#define INT_CARD_INSERTION_EN (1 << 15) +#define INT_CARD_REMOVAL_EN (1 << 14) +#define INT_SDIO_IRQ_EN (1 << 13) +#define INT_DAT0_EN (1 << 12) +#define INT_BUF_READ_EN (1 << 4) +#define INT_BUF_WRITE_EN (1 << 3) +#define INT_END_CMD_RES_EN (1 << 2) +#define INT_WRITE_OP_DONE_EN (1 << 1) +#define INT_READ_OP_EN (1 << 0) + +struct mxcmci_host { + struct mmc_host *mmc; + struct resource *res; + void __iomem *base; + int irq; + int detect_irq; + int dma; + int do_dma; + unsigned int power_mode; + struct imxmmc_platform_data *pdata; + + struct mmc_request *req; + struct mmc_command *cmd; + struct mmc_data *data; + + unsigned int dma_nents; + unsigned int datasize; + unsigned int dma_dir; + + u16 rev_no; + unsigned int cmdat; + + struct clk *clk; + + int clock; + + struct work_struct datawork; +}; + +static inline int mxcmci_use_dma(struct mxcmci_host *host) +{ + return host->do_dma; +} + +static void mxcmci_softreset(struct mxcmci_host *host) +{ + int i; + + /* reset sequence */ + writew(STR_STP_CLK_RESET, host->base + MMC_REG_STR_STP_CLK); + writew(STR_STP_CLK_RESET | STR_STP_CLK_START_CLK, + host->base + MMC_REG_STR_STP_CLK); + + for (i = 0; i < 8; i++) + writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK); + + writew(0xff, host->base + MMC_REG_RES_TO); +} + +static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) +{ + unsigned int nob = data->blocks; + unsigned int blksz = data->blksz; + unsigned int datasize = nob * blksz; +#ifdef HAS_DMA + struct scatterlist *sg; + int i; +#endif + if (data->flags & MMC_DATA_STREAM) + nob = 0xffff; + + host->data = data; + data->bytes_xfered = 0; + + writew(nob, host->base + MMC_REG_NOB); + writew(blksz, host->base + MMC_REG_BLK_LEN); + host->datasize = datasize; + +#ifdef HAS_DMA + for_each_sg(data->sg, sg, data->sg_len, i) { + if (sg->offset & 3 || sg->length & 3) { + host->do_dma = 0; + return; + } + } + + if (data->flags & MMC_DATA_READ) { + host->dma_dir = DMA_FROM_DEVICE; + host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, host->dma_dir); + + imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize, + host->res->start + MMC_REG_BUFFER_ACCESS, + DMA_MODE_READ); + } else { + host->dma_dir = DMA_TO_DEVICE; + host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, host->dma_dir); + + imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize, + host->res->start + MMC_REG_BUFFER_ACCESS, + DMA_MODE_WRITE); + } + + wmb(); + + imx_dma_enable(host->dma); +#endif /* HAS_DMA */ +} + +static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd, + unsigned int cmdat) +{ + WARN_ON(host->cmd != NULL); + host->cmd = cmd; + + switch (mmc_resp_type(cmd)) { + case MMC_RSP_R1: /* short CRC, OPCODE */ + case MMC_RSP_R1B:/* short CRC, OPCODE, BUSY */ + cmdat |= CMD_DAT_CONT_RESPONSE_48BIT_CRC; + break; + case MMC_RSP_R2: /* long 136 bit + CRC */ + cmdat |= CMD_DAT_CONT_RESPONSE_136BIT; + break; + case MMC_RSP_R3: /* short */ + cmdat |= CMD_DAT_CONT_RESPONSE_48BIT; + break; + case MMC_RSP_NONE: + break; + default: + dev_err(mmc_dev(host->mmc), "unhandled response type 0x%x\n", + mmc_resp_type(cmd)); + cmd->error = -EINVAL; + return -EINVAL; + } + + if (mxcmci_use_dma(host)) + writel(INT_READ_OP_EN | INT_WRITE_OP_DONE_EN | + INT_END_CMD_RES_EN, + host->base + MMC_REG_INT_CNTR); + else + writel(INT_END_CMD_RES_EN, host->base + MMC_REG_INT_CNTR); + + writew(cmd->opcode, host->base + MMC_REG_CMD); + writel(cmd->arg, host->base + MMC_REG_ARG); + writew(cmdat, host->base + MMC_REG_CMD_DAT_CONT); + + return 0; +} + +static void mxcmci_finish_request(struct mxcmci_host *host, + struct mmc_request *req) +{ + writel(0, host->base + MMC_REG_INT_CNTR); + + host->req = NULL; + host->cmd = NULL; + host->data = NULL; + + mmc_request_done(host->mmc, req); +} + +static int mxcmci_finish_data(struct mxcmci_host *host, unsigned int stat) +{ + struct mmc_data *data = host->data; + int data_error; + +#ifdef HAS_DMA + if (mxcmci_use_dma(host)) { + imx_dma_disable(host->dma); + dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_nents, + host->dma_dir); + } +#endif + + if (stat & STATUS_ERR_MASK) { + dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n", + stat); + if (stat & STATUS_CRC_READ_ERR) { + data->error = -EILSEQ; + } else if (stat & STATUS_CRC_WRITE_ERR) { + u32 err_code = (stat >> 9) & 0x3; + if (err_code == 2) /* No CRC response */ + data->error = -ETIMEDOUT; + else + data->error = -EILSEQ; + } else if (stat & STATUS_TIME_OUT_READ) { + data->error = -ETIMEDOUT; + } else { + data->error = -EIO; + } + } else { + data->bytes_xfered = host->datasize; + } + + data_error = data->error; + + host->data = NULL; + + return data_error; +} + +static void mxcmci_read_response(struct mxcmci_host *host, unsigned int stat) +{ + struct mmc_command *cmd = host->cmd; + int i; + u32 a, b, c; + + if (!cmd) + return; + + if (stat & STATUS_TIME_OUT_RESP) { + dev_dbg(mmc_dev(host->mmc), "CMD TIMEOUT\n"); + cmd->error = -ETIMEDOUT; + } else if (stat & STATUS_RESP_CRC_ERR && cmd->flags & MMC_RSP_CRC) { + dev_dbg(mmc_dev(host->mmc), "cmd crc error\n"); + cmd->error = -EILSEQ; + } + + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) { + for (i = 0; i < 4; i++) { + a = readw(host->base + MMC_REG_RES_FIFO); + b = readw(host->base + MMC_REG_RES_FIFO); + cmd->resp[i] = a << 16 | b; + } + } else { + a = readw(host->base + MMC_REG_RES_FIFO); + b = readw(host->base + MMC_REG_RES_FIFO); + c = readw(host->base + MMC_REG_RES_FIFO); + cmd->resp[0] = a << 24 | b << 8 | c >> 8; + } + } +} + +static int mxcmci_poll_status(struct mxcmci_host *host, u32 mask) +{ + u32 stat; + unsigned long timeout = jiffies + HZ; + + do { + stat = readl(host->base + MMC_REG_STATUS); + if (stat & STATUS_ERR_MASK) + return stat; + if (time_after(jiffies, timeout)) + return STATUS_TIME_OUT_READ; + if (stat & mask) + return 0; + cpu_relax(); + } while (1); +} + +static int mxcmci_pull(struct mxcmci_host *host, void *_buf, int bytes) +{ + unsigned int stat; + u32 *buf = _buf; + + while (bytes > 3) { + stat = mxcmci_poll_status(host, + STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE); + if (stat) + return stat; + *buf++ = readl(host->base + MMC_REG_BUFFER_ACCESS); + bytes -= 4; + } + + if (bytes) { + u8 *b = (u8 *)buf; + u32 tmp; + + stat = mxcmci_poll_status(host, + STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE); + if (stat) + return stat; + tmp = readl(host->base + MMC_REG_BUFFER_ACCESS); + memcpy(b, &tmp, bytes); + } + + return 0; +} + +static int mxcmci_push(struct mxcmci_host *host, void *_buf, int bytes) +{ + unsigned int stat; + u32 *buf = _buf; + + while (bytes > 3) { + stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY); + if (stat) + return stat; + writel(*buf++, host->base + MMC_REG_BUFFER_ACCESS); + bytes -= 4; + } + + if (bytes) { + u8 *b = (u8 *)buf; + u32 tmp; + + stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY); + if (stat) + return stat; + + memcpy(&tmp, b, bytes); + writel(tmp, host->base + MMC_REG_BUFFER_ACCESS); + } + + stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY); + if (stat) + return stat; + + return 0; +} + +static int mxcmci_transfer_data(struct mxcmci_host *host) +{ + struct mmc_data *data = host->req->data; + struct scatterlist *sg; + int stat, i; + + host->datasize = 0; + + host->data = data; + host->datasize = 0; + + if (data->flags & MMC_DATA_READ) { + for_each_sg(data->sg, sg, data->sg_len, i) { + stat = mxcmci_pull(host, sg_virt(sg), sg->length); + if (stat) + return stat; + host->datasize += sg->length; + } + } else { + for_each_sg(data->sg, sg, data->sg_len, i) { + stat = mxcmci_push(host, sg_virt(sg), sg->length); + if (stat) + return stat; + host->datasize += sg->length; + } + stat = mxcmci_poll_status(host, STATUS_WRITE_OP_DONE); + if (stat) + return stat; + } + return 0; +} + +static void mxcmci_datawork(struct work_struct *work) +{ + struct mxcmci_host *host = container_of(work, struct mxcmci_host, + datawork); + int datastat = mxcmci_transfer_data(host); + mxcmci_finish_data(host, datastat); + + if (host->req->stop) { + if (mxcmci_start_cmd(host, host->req->stop, 0)) { + mxcmci_finish_request(host, host->req); + return; + } + } else { + mxcmci_finish_request(host, host->req); + } +} + +#ifdef HAS_DMA +static void mxcmci_data_done(struct mxcmci_host *host, unsigned int stat) +{ + struct mmc_data *data = host->data; + int data_error; + + if (!data) + return; + + data_error = mxcmci_finish_data(host, stat); + + mxcmci_read_response(host, stat); + host->cmd = NULL; + + if (host->req->stop) { + if (mxcmci_start_cmd(host, host->req->stop, 0)) { + mxcmci_finish_request(host, host->req); + return; + } + } else { + mxcmci_finish_request(host, host->req); + } +} +#endif /* HAS_DMA */ + +static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat) +{ + mxcmci_read_response(host, stat); + host->cmd = NULL; + + if (!host->data && host->req) { + mxcmci_finish_request(host, host->req); + return; + } + + /* For the DMA case the DMA engine handles the data transfer + * automatically. For non DMA we have to to it ourselves. + * Don't do it in interrupt context though. + */ + if (!mxcmci_use_dma(host) && host->data) + schedule_work(&host->datawork); + +} + +static irqreturn_t mxcmci_irq(int irq, void *devid) +{ + struct mxcmci_host *host = devid; + u32 stat; + + stat = readl(host->base + MMC_REG_STATUS); + writel(stat, host->base + MMC_REG_STATUS); + + dev_dbg(mmc_dev(host->mmc), "%s: 0x%08x\n", __func__, stat); + + if (stat & STATUS_END_CMD_RESP) + mxcmci_cmd_done(host, stat); +#ifdef HAS_DMA + if (mxcmci_use_dma(host) && + (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE))) + mxcmci_data_done(host, stat); +#endif + return IRQ_HANDLED; +} + +static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req) +{ + struct mxcmci_host *host = mmc_priv(mmc); + unsigned int cmdat = host->cmdat; + + WARN_ON(host->req != NULL); + + host->req = req; + host->cmdat &= ~CMD_DAT_CONT_INIT; +#ifdef HAS_DMA + host->do_dma = 1; +#endif + if (req->data) { + mxcmci_setup_data(host, req->data); + + cmdat |= CMD_DAT_CONT_DATA_ENABLE; + + if (req->data->flags & MMC_DATA_WRITE) + cmdat |= CMD_DAT_CONT_WRITE; + } + + if (mxcmci_start_cmd(host, req->cmd, cmdat)) + mxcmci_finish_request(host, req); +} + +static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios) +{ + unsigned int divider; + int prescaler = 0; + unsigned int clk_in = clk_get_rate(host->clk); + + while (prescaler <= 0x800) { + for (divider = 1; divider <= 0xF; divider++) { + int x; + + x = (clk_in / (divider + 1)); + + if (prescaler) + x /= (prescaler * 2); + + if (x <= clk_ios) + break; + } + if (divider < 0x10) + break; + + if (prescaler == 0) + prescaler = 1; + else + prescaler <<= 1; + } + + writew((prescaler << 4) | divider, host->base + MMC_REG_CLK_RATE); + + dev_dbg(mmc_dev(host->mmc), "scaler: %d divider: %d in: %d out: %d\n", + prescaler, divider, clk_in, clk_ios); +} + +static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct mxcmci_host *host = mmc_priv(mmc); +#ifdef HAS_DMA + unsigned int blen; + /* + * use burstlen of 64 in 4 bit mode (--> reg value 0) + * use burstlen of 16 in 1 bit mode (--> reg value 16) + */ + if (ios->bus_width == MMC_BUS_WIDTH_4) + blen = 0; + else + blen = 16; + + imx_dma_config_burstlen(host->dma, blen); +#endif + if (ios->bus_width == MMC_BUS_WIDTH_4) + host->cmdat |= CMD_DAT_CONT_BUS_WIDTH_4; + else + host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4; + + if (host->power_mode != ios->power_mode) { + if (host->pdata && host->pdata->setpower) + host->pdata->setpower(mmc_dev(mmc), ios->vdd); + host->power_mode = ios->power_mode; + if (ios->power_mode == MMC_POWER_ON) + host->cmdat |= CMD_DAT_CONT_INIT; + } + + if (ios->clock) { + mxcmci_set_clk_rate(host, ios->clock); + writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK); + } else { + writew(STR_STP_CLK_STOP_CLK, host->base + MMC_REG_STR_STP_CLK); + } + + host->clock = ios->clock; +} + +static irqreturn_t mxcmci_detect_irq(int irq, void *data) +{ + struct mmc_host *mmc = data; + + dev_dbg(mmc_dev(mmc), "%s\n", __func__); + + mmc_detect_change(mmc, msecs_to_jiffies(250)); + return IRQ_HANDLED; +} + +static int mxcmci_get_ro(struct mmc_host *mmc) +{ + struct mxcmci_host *host = mmc_priv(mmc); + + if (host->pdata && host->pdata->get_ro) + return !!host->pdata->get_ro(mmc_dev(mmc)); + /* + * Board doesn't support read only detection; let the mmc core + * decide what to do. + */ + return -ENOSYS; +} + + +static const struct mmc_host_ops mxcmci_ops = { + .request = mxcmci_request, + .set_ios = mxcmci_set_ios, + .get_ro = mxcmci_get_ro, +}; + +static int mxcmci_probe(struct platform_device *pdev) +{ + struct mmc_host *mmc; + struct mxcmci_host *host = NULL; + struct resource *r; + int ret = 0, irq; + + printk(KERN_INFO "i.MX SDHC driver\n"); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_irq(pdev, 0); + if (!r || irq < 0) + return -EINVAL; + + r = request_mem_region(r->start, resource_size(r), pdev->name); + if (!r) + return -EBUSY; + + mmc = mmc_alloc_host(sizeof(struct mxcmci_host), &pdev->dev); + if (!mmc) { + ret = -ENOMEM; + goto out_release_mem; + } + + mmc->ops = &mxcmci_ops; + mmc->caps = MMC_CAP_4_BIT_DATA; + + /* MMC core transfer sizes tunable parameters */ + mmc->max_hw_segs = 64; + mmc->max_phys_segs = 64; + mmc->max_blk_size = 2048; + mmc->max_blk_count = 65535; + mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_seg_size = mmc->max_seg_size; + + host = mmc_priv(mmc); + host->base = ioremap(r->start, resource_size(r)); + if (!host->base) { + ret = -ENOMEM; + goto out_free; + } + + host->mmc = mmc; + host->pdata = pdev->dev.platform_data; + + if (host->pdata && host->pdata->ocr_avail) + mmc->ocr_avail = host->pdata->ocr_avail; + else + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + + host->res = r; + host->irq = irq; + + host->clk = clk_get(&pdev->dev, "sdhc_clk"); + if (IS_ERR(host->clk)) { + ret = PTR_ERR(host->clk); + goto out_iounmap; + } + clk_enable(host->clk); + + mxcmci_softreset(host); + + host->rev_no = readw(host->base + MMC_REG_REV_NO); + if (host->rev_no != 0x400) { + ret = -ENODEV; + dev_err(mmc_dev(host->mmc), "wrong rev.no. 0x%08x. aborting.\n", + host->rev_no); + goto out_clk_put; + } + + mmc->f_min = clk_get_rate(host->clk) >> 7; + mmc->f_max = clk_get_rate(host->clk) >> 1; + + /* recommended in data sheet */ + writew(0x2db4, host->base + MMC_REG_READ_TO); + + writel(0, host->base + MMC_REG_INT_CNTR); + +#ifdef HAS_DMA + host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW); + if (host->dma < 0) { + dev_err(mmc_dev(host->mmc), "imx_dma_request_by_prio failed\n"); + ret = -EBUSY; + goto out_clk_put; + } + + r = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (!r) { + ret = -EINVAL; + goto out_free_dma; + } + + ret = imx_dma_config_channel(host->dma, + IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO, + IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR, + r->start, 0); + if (ret) { + dev_err(mmc_dev(host->mmc), "failed to config DMA channel\n"); + goto out_free_dma; + } +#endif + INIT_WORK(&host->datawork, mxcmci_datawork); + + ret = request_irq(host->irq, mxcmci_irq, 0, DRIVER_NAME, host); + if (ret) + goto out_free_dma; + + platform_set_drvdata(pdev, mmc); + + if (host->pdata && host->pdata->init) { + ret = host->pdata->init(&pdev->dev, mxcmci_detect_irq, + host->mmc); + if (ret) + goto out_free_irq; + } + + mmc_add_host(mmc); + + return 0; + +out_free_irq: + free_irq(host->irq, host); +out_free_dma: +#ifdef HAS_DMA + imx_dma_free(host->dma); +#endif +out_clk_put: + clk_disable(host->clk); + clk_put(host->clk); +out_iounmap: + iounmap(host->base); +out_free: + mmc_free_host(mmc); +out_release_mem: + release_mem_region(host->res->start, resource_size(host->res)); + return ret; +} + +static int mxcmci_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct mxcmci_host *host = mmc_priv(mmc); + + platform_set_drvdata(pdev, NULL); + + mmc_remove_host(mmc); + + if (host->pdata && host->pdata->exit) + host->pdata->exit(&pdev->dev, mmc); + + free_irq(host->irq, host); + iounmap(host->base); +#ifdef HAS_DMA + imx_dma_free(host->dma); +#endif + clk_disable(host->clk); + clk_put(host->clk); + + release_mem_region(host->res->start, resource_size(host->res)); + release_resource(host->res); + + mmc_free_host(mmc); + + return 0; +} + +#ifdef CONFIG_PM +static int mxcmci_suspend(struct platform_device *dev, pm_message_t state) +{ + struct mmc_host *mmc = platform_get_drvdata(dev); + int ret = 0; + + if (mmc) + ret = mmc_suspend_host(mmc, state); + + return ret; +} + +static int mxcmci_resume(struct platform_device *dev) +{ + struct mmc_host *mmc = platform_get_drvdata(dev); + struct mxcmci_host *host; + int ret = 0; + + if (mmc) { + host = mmc_priv(mmc); + ret = mmc_resume_host(mmc); + } + + return ret; +} +#else +#define mxcmci_suspend NULL +#define mxcmci_resume NULL +#endif /* CONFIG_PM */ + +static struct platform_driver mxcmci_driver = { + .probe = mxcmci_probe, + .remove = mxcmci_remove, + .suspend = mxcmci_suspend, + .resume = mxcmci_resume, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + } +}; + +static int __init mxcmci_init(void) +{ + return platform_driver_register(&mxcmci_driver); +} + +static void __exit mxcmci_exit(void) +{ + platform_driver_unregister(&mxcmci_driver); +} + +module_init(mxcmci_init); +module_exit(mxcmci_exit); + +MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver"); +MODULE_AUTHOR("Sascha Hauer, Pengutronix"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:imx-mmc"); diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 3c5483b75da4..9702ad3774cf 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -180,7 +180,15 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) else DALGN &= ~(1 << host->dma); DDADR(host->dma) = host->sg_dma; - DCSR(host->dma) = DCSR_RUN; + + /* + * workaround for erratum #91: + * only start DMA now if we are doing a read, + * otherwise we wait until CMD/RESP has finished + * before starting DMA. + */ + if (!cpu_is_pxa27x() || data->flags & MMC_DATA_READ) + DCSR(host->dma) = DCSR_RUN; } static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat) @@ -251,23 +259,28 @@ static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat) if (stat & STAT_TIME_OUT_RESPONSE) { cmd->error = -ETIMEDOUT; } else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) { -#ifdef CONFIG_PXA27x /* * workaround for erratum #42: * Intel PXA27x Family Processor Specification Update Rev 001 * A bogus CRC error can appear if the msb of a 136 bit * response is a one. */ - if (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000) { + if (cpu_is_pxa27x() && + (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000)) pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode); - } else -#endif - cmd->error = -EILSEQ; + else + cmd->error = -EILSEQ; } pxamci_disable_irq(host, END_CMD_RES); if (host->data && !cmd->error) { pxamci_enable_irq(host, DATA_TRAN_DONE); + /* + * workaround for erratum #91, if doing write + * enable DMA late + */ + if (cpu_is_pxa27x() && host->data->flags & MMC_DATA_WRITE) + DCSR(host->dma) = DCSR_RUN; } else { pxamci_finish_request(host, host->mrq); } diff --git a/drivers/mmc/host/ricoh_mmc.c b/drivers/mmc/host/ricoh_mmc.c index be9e7b32b34e..f62790513322 100644 --- a/drivers/mmc/host/ricoh_mmc.c +++ b/drivers/mmc/host/ricoh_mmc.c @@ -196,7 +196,7 @@ static void __devexit ricoh_mmc_remove(struct pci_dev *pdev) pci_set_drvdata(pdev, NULL); } -static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state) +static int ricoh_mmc_suspend_late(struct pci_dev *pdev, pm_message_t state) { struct pci_dev *fw_dev = NULL; @@ -210,7 +210,7 @@ static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state) return 0; } -static int ricoh_mmc_resume(struct pci_dev *pdev) +static int ricoh_mmc_resume_early(struct pci_dev *pdev) { struct pci_dev *fw_dev = NULL; @@ -229,8 +229,8 @@ static struct pci_driver ricoh_mmc_driver = { .id_table = pci_ids, .probe = ricoh_mmc_probe, .remove = __devexit_p(ricoh_mmc_remove), - .suspend = ricoh_mmc_suspend, - .resume = ricoh_mmc_resume, + .suspend_late = ricoh_mmc_suspend_late, + .resume_early = ricoh_mmc_resume_early, }; /*****************************************************************************\ diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 7df6bbf0e4d9..6f6a0f6dafd6 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -453,7 +453,7 @@ static struct platform_driver sa1100_mtd_driver = { .resume = sa1100_mtd_resume, .shutdown = sa1100_mtd_shutdown, .driver = { - .name = "flash", + .name = "sa1100-mtd", .owner = THIS_MODULE, }, }; @@ -474,4 +474,4 @@ module_exit(sa1100_mtd_exit); MODULE_AUTHOR("Nicolas Pitre"); MODULE_DESCRIPTION("SA1100 CFI map driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:flash"); +MODULE_ALIAS("platform:sa1100-mtd"); diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 8b12e6e109d3..2ff88791cebc 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -273,7 +273,7 @@ config MTD_NAND_CAFE config MTD_NAND_CS553X tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)" - depends on X86_32 && (X86_PC || X86_GENERICARCH) + depends on X86_32 help The CS553x companion chips for the AMD Geode processor include NAND flash controllers with built-in hardware ECC diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 65929db29446..1f6eb2578717 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -676,7 +676,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) dev_dbg(ctrl->dev, "fsl_elbc_init: nand->numchips = %d\n", chip->numchips); - dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %ld\n", + dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %lld\n", chip->chipsize); dev_dbg(ctrl->dev, "fsl_elbc_init: nand->pagemask = %8x\n", chip->pagemask); @@ -703,7 +703,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.layout = %p\n", chip->ecc.layout); dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags); - dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %d\n", mtd->size); + dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size); dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->erasesize = %d\n", mtd->erasesize); dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->writesize = %d\n", @@ -932,8 +932,8 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl, #endif add_mtd_device(&priv->mtd); - printk(KERN_INFO "eLBC NAND device at 0x%zx, bank %d\n", - res.start, priv->bank); + printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n", + (unsigned long long)res.start, priv->bank); return 0; err: diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 9bd6c9ac8443..a8b9376cf324 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -107,7 +107,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev, if (pasemi_nand_mtd) return -ENODEV; - pr_debug("pasemi_nand at %lx-%lx\n", res.start, res.end); + pr_debug("pasemi_nand at %llx-%llx\n", res.start, res.end); /* Allocate memory for MTD device structure and private data */ pasemi_nand_mtd = kzalloc(sizeof(struct mtd_info) + @@ -170,7 +170,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev, goto out_lpc; } - printk(KERN_INFO "PA Semi NAND flash at %08lx, control at I/O %x\n", + printk(KERN_INFO "PA Semi NAND flash at %08llx, control at I/O %x\n", res.start, lpcctl); return 0; diff --git a/drivers/mtd/ubi/Kconfig.debug b/drivers/mtd/ubi/Kconfig.debug index 1e2ee22edeff..2246f154e2f7 100644 --- a/drivers/mtd/ubi/Kconfig.debug +++ b/drivers/mtd/ubi/Kconfig.debug @@ -33,16 +33,6 @@ config MTD_UBI_DEBUG_DISABLE_BGT This option switches the background thread off by default. The thread may be also be enabled/disabled via UBI sysfs. -config MTD_UBI_DEBUG_USERSPACE_IO - bool "Direct user-space write/erase support" - default n - depends on MTD_UBI_DEBUG - help - By default, users cannot directly write and erase individual - eraseblocks of dynamic volumes, and have to use update operation - instead. This option enables this capability - it is very useful for - debugging and testing. - config MTD_UBI_DEBUG_EMULATE_BITFLIPS bool "Emulate flash bit-flips" depends on MTD_UBI_DEBUG diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 9082768cc6c3..4048db83aef6 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -263,8 +263,12 @@ static ssize_t dev_attribute_show(struct device *dev, return ret; } -/* Fake "release" method for UBI devices */ -static void dev_release(struct device *dev) { } +static void dev_release(struct device *dev) +{ + struct ubi_device *ubi = container_of(dev, struct ubi_device, dev); + + kfree(ubi); +} /** * ubi_sysfs_init - initialize sysfs for an UBI device. @@ -380,7 +384,7 @@ static void free_user_volumes(struct ubi_device *ubi) */ static int uif_init(struct ubi_device *ubi) { - int i, err, do_free = 0; + int i, err; dev_t dev; sprintf(ubi->ubi_name, UBI_NAME_STR "%d", ubi->ubi_num); @@ -427,13 +431,10 @@ static int uif_init(struct ubi_device *ubi) out_volumes: kill_volumes(ubi); - do_free = 0; out_sysfs: ubi_sysfs_close(ubi); cdev_del(&ubi->cdev); out_unreg: - if (do_free) - free_user_volumes(ubi); unregister_chrdev_region(ubi->cdev.dev, ubi->vtbl_slots + 1); ubi_err("cannot initialize UBI %s, error %d", ubi->ubi_name, err); return err; @@ -947,6 +948,12 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) if (ubi->bgt_thread) kthread_stop(ubi->bgt_thread); + /* + * Get a reference to the device in order to prevent 'dev_release()' + * from freeing @ubi object. + */ + get_device(&ubi->dev); + uif_close(ubi); ubi_wl_close(ubi); free_internal_volumes(ubi); @@ -958,7 +965,7 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) vfree(ubi->dbg_peb_buf); #endif ubi_msg("mtd%d is detached from ubi%d", ubi->mtd->index, ubi->ubi_num); - kfree(ubi); + put_device(&ubi->dev); return 0; } diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 98cf31ed0814..e63c8fc3df3a 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -40,9 +40,9 @@ #include <linux/ioctl.h> #include <linux/capability.h> #include <linux/uaccess.h> -#include <linux/smp_lock.h> +#include <linux/compat.h> +#include <linux/math64.h> #include <mtd/ubi-user.h> -#include <asm/div64.h> #include "ubi.h" /** @@ -195,7 +195,6 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count, int err, lnum, off, len, tbuf_size; size_t count_save = count; void *tbuf; - uint64_t tmp; dbg_gen("read %zd bytes from offset %lld of volume %d", count, *offp, vol->vol_id); @@ -225,10 +224,7 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count, return -ENOMEM; len = count > tbuf_size ? tbuf_size : count; - - tmp = *offp; - off = do_div(tmp, vol->usable_leb_size); - lnum = tmp; + lnum = div_u64_rem(*offp, vol->usable_leb_size, &off); do { cond_resched(); @@ -263,12 +259,9 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count, return err ? err : count_save - count; } -#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO - /* * This function allows to directly write to dynamic UBI volumes, without - * issuing the volume update operation. Available only as a debugging feature. - * Very useful for testing UBI. + * issuing the volume update operation. */ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, size_t count, loff_t *offp) @@ -279,7 +272,9 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, int lnum, off, len, tbuf_size, err = 0; size_t count_save = count; char *tbuf; - uint64_t tmp; + + if (!vol->direct_writes) + return -EPERM; dbg_gen("requested: write %zd bytes to offset %lld of volume %u", count, *offp, vol->vol_id); @@ -287,10 +282,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, if (vol->vol_type == UBI_STATIC_VOLUME) return -EROFS; - tmp = *offp; - off = do_div(tmp, vol->usable_leb_size); - lnum = tmp; - + lnum = div_u64_rem(*offp, vol->usable_leb_size, &off); if (off & (ubi->min_io_size - 1)) { dbg_err("unaligned position"); return -EINVAL; @@ -347,10 +339,6 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, return err ? err : count_save - count; } -#else -#define vol_cdev_direct_write(file, buf, count, offp) (-EPERM) -#endif /* CONFIG_MTD_UBI_DEBUG_USERSPACE_IO */ - static ssize_t vol_cdev_write(struct file *file, const char __user *buf, size_t count, loff_t *offp) { @@ -402,8 +390,8 @@ static ssize_t vol_cdev_write(struct file *file, const char __user *buf, return count; } -static int vol_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long vol_cdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int err = 0; struct ubi_volume_desc *desc = file->private_data; @@ -487,7 +475,6 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, break; } -#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO /* Logical eraseblock erasure command */ case UBI_IOCEBER: { @@ -518,13 +505,77 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, err = ubi_wl_flush(ubi); break; } -#endif + + /* Logical eraseblock map command */ + case UBI_IOCEBMAP: + { + struct ubi_map_req req; + + err = copy_from_user(&req, argp, sizeof(struct ubi_map_req)); + if (err) { + err = -EFAULT; + break; + } + err = ubi_leb_map(desc, req.lnum, req.dtype); + break; + } + + /* Logical eraseblock un-map command */ + case UBI_IOCEBUNMAP: + { + int32_t lnum; + + err = get_user(lnum, (__user int32_t *)argp); + if (err) { + err = -EFAULT; + break; + } + err = ubi_leb_unmap(desc, lnum); + break; + } + + /* Check if logical eraseblock is mapped command */ + case UBI_IOCEBISMAP: + { + int32_t lnum; + + err = get_user(lnum, (__user int32_t *)argp); + if (err) { + err = -EFAULT; + break; + } + err = ubi_is_mapped(desc, lnum); + break; + } + + /* Set volume property command*/ + case UBI_IOCSETPROP: + { + struct ubi_set_prop_req req; + + err = copy_from_user(&req, argp, + sizeof(struct ubi_set_prop_req)); + if (err) { + err = -EFAULT; + break; + } + switch (req.property) { + case UBI_PROP_DIRECT_WRITE: + mutex_lock(&ubi->volumes_mutex); + desc->vol->direct_writes = !!req.value; + mutex_unlock(&ubi->volumes_mutex); + break; + default: + err = -EINVAL; + break; + } + break; + } default: err = -ENOTTY; break; } - return err; } @@ -762,8 +813,8 @@ out_free: return err; } -static int ubi_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long ubi_cdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int err = 0; struct ubi_device *ubi; @@ -773,7 +824,7 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file, if (!capable(CAP_SYS_RESOURCE)) return -EPERM; - ubi = ubi_get_by_major(imajor(inode)); + ubi = ubi_get_by_major(imajor(file->f_mapping->host)); if (!ubi) return -ENODEV; @@ -843,7 +894,6 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file, case UBI_IOCRSVOL: { int pebs; - uint64_t tmp; struct ubi_rsvol_req req; dbg_gen("re-size volume"); @@ -863,9 +913,8 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file, break; } - tmp = req.bytes; - pebs = !!do_div(tmp, desc->vol->usable_leb_size); - pebs += tmp; + pebs = div_u64(req.bytes + desc->vol->usable_leb_size - 1, + desc->vol->usable_leb_size); mutex_lock(&ubi->volumes_mutex); err = ubi_resize_volume(desc, pebs); @@ -909,8 +958,8 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file, return err; } -static int ctrl_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long ctrl_cdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int err = 0; void __user *argp = (void __user *)arg; @@ -986,26 +1035,59 @@ static int ctrl_cdev_ioctl(struct inode *inode, struct file *file, return err; } -/* UBI control character device operations */ -struct file_operations ubi_ctrl_cdev_operations = { - .ioctl = ctrl_cdev_ioctl, - .owner = THIS_MODULE, +#ifdef CONFIG_COMPAT +static long vol_cdev_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long translated_arg = (unsigned long)compat_ptr(arg); + + return vol_cdev_ioctl(file, cmd, translated_arg); +} + +static long ubi_cdev_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long translated_arg = (unsigned long)compat_ptr(arg); + + return ubi_cdev_ioctl(file, cmd, translated_arg); +} + +static long ctrl_cdev_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long translated_arg = (unsigned long)compat_ptr(arg); + + return ctrl_cdev_ioctl(file, cmd, translated_arg); +} +#else +#define vol_cdev_compat_ioctl NULL +#define ubi_cdev_compat_ioctl NULL +#define ctrl_cdev_compat_ioctl NULL +#endif + +/* UBI volume character device operations */ +const struct file_operations ubi_vol_cdev_operations = { + .owner = THIS_MODULE, + .open = vol_cdev_open, + .release = vol_cdev_release, + .llseek = vol_cdev_llseek, + .read = vol_cdev_read, + .write = vol_cdev_write, + .unlocked_ioctl = vol_cdev_ioctl, + .compat_ioctl = vol_cdev_compat_ioctl, }; /* UBI character device operations */ -struct file_operations ubi_cdev_operations = { - .owner = THIS_MODULE, - .ioctl = ubi_cdev_ioctl, - .llseek = no_llseek, +const struct file_operations ubi_cdev_operations = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .unlocked_ioctl = ubi_cdev_ioctl, + .compat_ioctl = ubi_cdev_compat_ioctl, }; -/* UBI volume character device operations */ -struct file_operations ubi_vol_cdev_operations = { - .owner = THIS_MODULE, - .open = vol_cdev_open, - .release = vol_cdev_release, - .llseek = vol_cdev_llseek, - .read = vol_cdev_read, - .write = vol_cdev_write, - .ioctl = vol_cdev_ioctl, +/* UBI control character device operations */ +const struct file_operations ubi_ctrl_cdev_operations = { + .owner = THIS_MODULE, + .unlocked_ioctl = ctrl_cdev_ioctl, + .compat_ioctl = ctrl_cdev_compat_ioctl, }; diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c index 6dd4f5e77f82..49cd55ade9c8 100644 --- a/drivers/mtd/ubi/gluebi.c +++ b/drivers/mtd/ubi/gluebi.c @@ -28,7 +28,7 @@ * eraseblock size is equivalent to the logical eraseblock size of the volume. */ -#include <asm/div64.h> +#include <linux/math64.h> #include "ubi.h" /** @@ -109,7 +109,6 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len, int err = 0, lnum, offs, total_read; struct ubi_volume *vol; struct ubi_device *ubi; - uint64_t tmp = from; dbg_gen("read %zd bytes from offset %lld", len, from); @@ -119,9 +118,7 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len, vol = container_of(mtd, struct ubi_volume, gluebi_mtd); ubi = vol->ubi; - offs = do_div(tmp, mtd->erasesize); - lnum = tmp; - + lnum = div_u64_rem(from, mtd->erasesize, &offs); total_read = len; while (total_read) { size_t to_read = mtd->erasesize - offs; @@ -160,7 +157,6 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len, int err = 0, lnum, offs, total_written; struct ubi_volume *vol; struct ubi_device *ubi; - uint64_t tmp = to; dbg_gen("write %zd bytes to offset %lld", len, to); @@ -173,8 +169,7 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len, if (ubi->ro_mode) return -EROFS; - offs = do_div(tmp, mtd->erasesize); - lnum = tmp; + lnum = div_u64_rem(to, mtd->erasesize, &offs); if (len % mtd->writesize || offs % mtd->writesize) return -EINVAL; diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index ecde202a5a12..c3d653ba5ca0 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -42,7 +42,7 @@ #include <linux/err.h> #include <linux/crc32.h> -#include <asm/div64.h> +#include <linux/math64.h> #include "ubi.h" #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID @@ -904,10 +904,8 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi) dbg_msg("scanning is finished"); /* Calculate mean erase counter */ - if (si->ec_count) { - do_div(si->ec_sum, si->ec_count); - si->mean_ec = si->ec_sum; - } + if (si->ec_count) + si->mean_ec = div_u64(si->ec_sum, si->ec_count); if (si->is_empty) ubi_msg("empty MTD device detected"); diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 4a8ec485c91d..c055511bb1b2 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -206,6 +206,7 @@ struct ubi_volume_desc; * @upd_marker: %1 if the update marker is set for this volume * @updating: %1 if the volume is being updated * @changing_leb: %1 if the atomic LEB change ioctl command is in progress + * @direct_writes: %1 if direct writes are enabled for this volume * * @gluebi_desc: gluebi UBI volume descriptor * @gluebi_refcount: reference count of the gluebi MTD device @@ -253,6 +254,7 @@ struct ubi_volume { unsigned int upd_marker:1; unsigned int updating:1; unsigned int changing_leb:1; + unsigned int direct_writes:1; #ifdef CONFIG_MTD_UBI_GLUEBI /* @@ -304,7 +306,8 @@ struct ubi_wl_entry; * @vtbl_size: size of the volume table in bytes * @vtbl: in-RAM volume table copy * @volumes_mutex: protects on-flash volume table and serializes volume - * changes, like creation, deletion, update, re-size and re-name + * changes, like creation, deletion, update, re-size, + * re-name and set property * * @max_ec: current highest erase counter value * @mean_ec: current mean erase counter value @@ -449,9 +452,9 @@ struct ubi_device { }; extern struct kmem_cache *ubi_wl_entry_slab; -extern struct file_operations ubi_ctrl_cdev_operations; -extern struct file_operations ubi_cdev_operations; -extern struct file_operations ubi_vol_cdev_operations; +extern const struct file_operations ubi_ctrl_cdev_operations; +extern const struct file_operations ubi_cdev_operations; +extern const struct file_operations ubi_vol_cdev_operations; extern struct class *ubi_class; extern struct mutex ubi_devices_mutex; diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c index 8b89cc18ff0b..6b4d1ae891ae 100644 --- a/drivers/mtd/ubi/upd.c +++ b/drivers/mtd/ubi/upd.c @@ -40,7 +40,7 @@ #include <linux/err.h> #include <linux/uaccess.h> -#include <asm/div64.h> +#include <linux/math64.h> #include "ubi.h" /** @@ -89,7 +89,6 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol, long long bytes) { int err; - uint64_t tmp; struct ubi_vtbl_record vtbl_rec; dbg_gen("clear update marker for volume %d", vol->vol_id); @@ -101,9 +100,9 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol, if (vol->vol_type == UBI_STATIC_VOLUME) { vol->corrupted = 0; - vol->used_bytes = tmp = bytes; - vol->last_eb_bytes = do_div(tmp, vol->usable_leb_size); - vol->used_ebs = tmp; + vol->used_bytes = bytes; + vol->used_ebs = div_u64_rem(bytes, vol->usable_leb_size, + &vol->last_eb_bytes); if (vol->last_eb_bytes) vol->used_ebs += 1; else @@ -131,7 +130,6 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol, long long bytes) { int i, err; - uint64_t tmp; dbg_gen("start update of volume %d, %llu bytes", vol->vol_id, bytes); ubi_assert(!vol->updating && !vol->changing_leb); @@ -161,9 +159,8 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol, if (!vol->upd_buf) return -ENOMEM; - tmp = bytes; - vol->upd_ebs = !!do_div(tmp, vol->usable_leb_size); - vol->upd_ebs += tmp; + vol->upd_ebs = div_u64(bytes + vol->usable_leb_size - 1, + vol->usable_leb_size); vol->upd_bytes = bytes; vol->upd_received = 0; return 0; @@ -282,7 +279,6 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum, int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol, const void __user *buf, int count) { - uint64_t tmp; int lnum, offs, err = 0, len, to_write = count; dbg_gen("write %d of %lld bytes, %lld already passed", @@ -291,10 +287,7 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol, if (ubi->ro_mode) return -EROFS; - tmp = vol->upd_received; - offs = do_div(tmp, vol->usable_leb_size); - lnum = tmp; - + lnum = div_u64_rem(vol->upd_received, vol->usable_leb_size, &offs); if (vol->upd_received + count > vol->upd_bytes) to_write = count = vol->upd_bytes - vol->upd_received; diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c index 22e1d7398fce..df5483562b7a 100644 --- a/drivers/mtd/ubi/vmt.c +++ b/drivers/mtd/ubi/vmt.c @@ -24,7 +24,7 @@ */ #include <linux/err.h> -#include <asm/div64.h> +#include <linux/math64.h> #include "ubi.h" #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID @@ -205,7 +205,6 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) int i, err, vol_id = req->vol_id, do_free = 1; struct ubi_volume *vol; struct ubi_vtbl_record vtbl_rec; - uint64_t bytes; dev_t dev; if (ubi->ro_mode) @@ -255,10 +254,8 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) /* Calculate how many eraseblocks are requested */ vol->usable_leb_size = ubi->leb_size - ubi->leb_size % req->alignment; - bytes = req->bytes; - if (do_div(bytes, vol->usable_leb_size)) - vol->reserved_pebs = 1; - vol->reserved_pebs += bytes; + vol->reserved_pebs += div_u64(req->bytes + vol->usable_leb_size - 1, + vol->usable_leb_size); /* Reserve physical eraseblocks */ if (vol->reserved_pebs > ubi->avail_pebs) { @@ -301,10 +298,10 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) vol->used_bytes = (long long)vol->used_ebs * vol->usable_leb_size; } else { - bytes = vol->used_bytes; - vol->last_eb_bytes = do_div(bytes, vol->usable_leb_size); - vol->used_ebs = bytes; - if (vol->last_eb_bytes) + vol->used_ebs = div_u64_rem(vol->used_bytes, + vol->usable_leb_size, + &vol->last_eb_bytes); + if (vol->last_eb_bytes != 0) vol->used_ebs += 1; else vol->last_eb_bytes = vol->usable_leb_size; diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index 535c234286ea..8c694213035b 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -1475,6 +1475,7 @@ el3_resume(struct device *pdev) spin_lock_irqsave(&lp->lock, flags); outw(PowerUp, ioaddr + EL3_CMD); + EL3WINDOW(0); el3_up(dev); if (netif_running(dev)) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 9fe8cb7d43ac..6bdfd47d679d 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1829,7 +1829,7 @@ config 68360_ENET config FEC bool "FEC ethernet controller (of ColdFire CPUs)" - depends on M523x || M527x || M5272 || M528x || M520x + depends on M523x || M527x || M5272 || M528x || M520x || M532x help Say Y here if you want to use the built-in 10/100 Fast ethernet controller on some Motorola ColdFire processors. diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c index d15d8b79d8e5..54b52e5b1821 100644 --- a/drivers/net/arm/etherh.c +++ b/drivers/net/arm/etherh.c @@ -646,7 +646,7 @@ static const struct net_device_ops etherh_netdev_ops = { .ndo_get_stats = ei_get_stats, .ndo_set_multicast_list = ei_set_multicast_list, .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_set_mac_addr, + .ndo_set_mac_address = eth_mac_addr, .ndo_change_mtu = eth_change_mtu, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = ei_poll, diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index 840b3d1a22f5..bbbc3bb08aa5 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -806,7 +806,7 @@ static int cas_reset_mii_phy(struct cas *cp) cas_phy_write(cp, MII_BMCR, BMCR_RESET); udelay(100); - while (limit--) { + while (--limit) { val = cas_phy_read(cp, MII_BMCR); if ((val & BMCR_RESET) == 0) break; @@ -979,7 +979,7 @@ static void cas_phy_init(struct cas *cp) writel(val, cp->regs + REG_PCS_MII_CTRL); limit = STOP_TRIES; - while (limit-- > 0) { + while (--limit > 0) { udelay(10); if ((readl(cp->regs + REG_PCS_MII_CTRL) & PCS_MII_RESET) == 0) diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index 379a1324db4e..d31791f60292 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -2276,8 +2276,7 @@ no_mem: } else if ((len = ntohl(r->len_cq)) != 0) { struct sge_fl *fl; - if (eth) - lro = qs->lro_enabled && is_eth_tcp(rss_hi); + lro &= eth && is_eth_tcp(rss_hi); fl = (len & F_RSPD_FLQ) ? &qs->fl[1] : &qs->fl[0]; if (fl->use_pages) { diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 26474c92193f..6bd63cc67b3e 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -31,7 +31,7 @@ char e1000_driver_name[] = "e1000"; static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; -#define DRV_VERSION "7.3.20-k3-NAPI" +#define DRV_VERSION "7.3.21-k3-NAPI" const char e1000_driver_version[] = DRV_VERSION; static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; @@ -940,7 +940,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, err = pci_enable_device(pdev); } else { bars = pci_select_bars(pdev, IORESOURCE_MEM); - err = pci_enable_device(pdev); + err = pci_enable_device_mem(pdev); } if (err) return err; @@ -3712,7 +3712,7 @@ static irqreturn_t e1000_intr(int irq, void *data) struct e1000_hw *hw = &adapter->hw; u32 rctl, icr = er32(ICR); - if (unlikely(!icr)) + if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags))) return IRQ_NONE; /* Not our interrupt */ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 7e33c129d51c..2769083bfe83 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -1698,7 +1698,7 @@ static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_priva /* * Set MII speed to 2.5 MHz */ - fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2; + fep->phy_speed = (MCF_CLK / 3) / (2500000 * 2 ) * 2; fecp->fec_mii_speed = fep->phy_speed; fec_restart(dev, 0); diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 3f7eab42aef1..9b12a13a640f 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -351,6 +351,9 @@ static int gfar_probe(struct of_device *ofdev, /* Reset MAC layer */ gfar_write(&priv->regs->maccfg1, MACCFG1_SOFT_RESET); + /* We need to delay at least 3 TX clocks */ + udelay(2); + tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW); gfar_write(&priv->regs->maccfg1, tempval); @@ -1626,6 +1629,12 @@ static void gfar_schedule_cleanup(struct net_device *dev) if (netif_rx_schedule_prep(&priv->napi)) { gfar_write(&priv->regs->imask, IMASK_RTX_DISABLED); __netif_rx_schedule(&priv->napi); + } else { + /* + * Clear IEVENT, so interrupts aren't called again + * because of the packets that have already arrived. + */ + gfar_write(&priv->regs->ievent, IEVENT_RTX_MASK); } spin_unlock(&priv->rxlock); diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index b1a83344acc7..eaa86897f5c3 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -312,7 +312,7 @@ extern const char gfar_driver_version[]; #define ATTRELI_EI(x) (x) #define BD_LFLAG(flags) ((flags) << 16) -#define BD_LENGTH_MASK 0x00ff +#define BD_LENGTH_MASK 0x0000ffff /* TxBD status field bits */ #define TXBD_READY 0x8000 diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c index f3706e415b45..f49a426ad681 100644 --- a/drivers/net/gianfar_mii.c +++ b/drivers/net/gianfar_mii.c @@ -234,6 +234,8 @@ static int gfar_mdio_probe(struct of_device *ofdev, if (NULL == new_bus) return -ENOMEM; + device_init_wakeup(&ofdev->dev, 1); + new_bus->name = "Gianfar MII Bus", new_bus->read = &gfar_mdio_read, new_bus->write = &gfar_mdio_write, diff --git a/drivers/net/ibm_newemac/phy.c b/drivers/net/ibm_newemac/phy.c index c40cd8df2212..ac9d964e59ec 100644 --- a/drivers/net/ibm_newemac/phy.c +++ b/drivers/net/ibm_newemac/phy.c @@ -60,7 +60,7 @@ int emac_mii_reset_phy(struct mii_phy *phy) udelay(300); - while (limit--) { + while (--limit) { val = phy_read(phy, MII_BMCR); if (val >= 0 && (val & BMCR_RESET) == 0) break; @@ -84,7 +84,7 @@ int emac_mii_reset_gpcs(struct mii_phy *phy) udelay(300); - while (limit--) { + while (--limit) { val = gpcs_phy_read(phy, MII_BMCR); if (val >= 0 && (val & BMCR_RESET) == 0) break; diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index f5e2e7235fcb..13ca73f96ec6 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -699,11 +699,18 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) /* SGMII link check is done through the PCS register. */ if ((hw->phy.media_type != e1000_media_type_copper) || - (igb_sgmii_active_82575(hw))) + (igb_sgmii_active_82575(hw))) { ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed, &duplex); - else + /* + * Use this flag to determine if link needs to be checked or + * not. If we have link clear the flag so that we do not + * continue to check for link. + */ + hw->mac.get_link_status = !hw->mac.serdes_has_link; + } else { ret_val = igb_check_for_copper_link(hw); + } return ret_val; } diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h index 5a27825cc48a..aebef8e48e76 100644 --- a/drivers/net/igb/igb.h +++ b/drivers/net/igb/igb.h @@ -300,11 +300,10 @@ struct igb_adapter { #define IGB_FLAG_HAS_MSI (1 << 0) #define IGB_FLAG_MSI_ENABLE (1 << 1) -#define IGB_FLAG_HAS_DCA (1 << 2) -#define IGB_FLAG_DCA_ENABLED (1 << 3) -#define IGB_FLAG_IN_NETPOLL (1 << 5) -#define IGB_FLAG_QUAD_PORT_A (1 << 6) -#define IGB_FLAG_NEED_CTX_IDX (1 << 7) +#define IGB_FLAG_DCA_ENABLED (1 << 2) +#define IGB_FLAG_IN_NETPOLL (1 << 3) +#define IGB_FLAG_QUAD_PORT_A (1 << 4) +#define IGB_FLAG_NEED_CTX_IDX (1 << 5) enum e1000_state_t { __IGB_TESTING, diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index b82b0fb2056c..a50db5398fa5 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -206,10 +206,11 @@ static int __init igb_init_module(void) global_quad_port_a = 0; - ret = pci_register_driver(&igb_driver); #ifdef CONFIG_IGB_DCA dca_register_notify(&dca_notifier); #endif + + ret = pci_register_driver(&igb_driver); return ret; } @@ -1156,11 +1157,10 @@ static int __devinit igb_probe(struct pci_dev *pdev, /* set flags */ switch (hw->mac.type) { - case e1000_82576: case e1000_82575: - adapter->flags |= IGB_FLAG_HAS_DCA; adapter->flags |= IGB_FLAG_NEED_CTX_IDX; break; + case e1000_82576: default: break; } @@ -1310,8 +1310,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, goto err_register; #ifdef CONFIG_IGB_DCA - if ((adapter->flags & IGB_FLAG_HAS_DCA) && - (dca_add_requester(&pdev->dev) == 0)) { + if (dca_add_requester(&pdev->dev) == 0) { adapter->flags |= IGB_FLAG_DCA_ENABLED; dev_info(&pdev->dev, "DCA enabled\n"); /* Always use CB2 mode, difference is masked @@ -1835,11 +1834,11 @@ static void igb_setup_rctl(struct igb_adapter *adapter) rctl |= E1000_RCTL_SECRC; /* - * disable store bad packets, long packet enable, and clear size bits. + * disable store bad packets and clear size bits. */ - rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_LPE | E1000_RCTL_SZ_256); + rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256); - if (adapter->netdev->mtu > ETH_DATA_LEN) + /* enable LPE when to prevent packets larger than max_frame_size */ rctl |= E1000_RCTL_LPE; /* Setup buffer sizes */ @@ -1865,7 +1864,7 @@ static void igb_setup_rctl(struct igb_adapter *adapter) */ /* allocations using alloc_page take too long for regular MTU * so only enable packet split for jumbo frames */ - if (rctl & E1000_RCTL_LPE) { + if (adapter->netdev->mtu > ETH_DATA_LEN) { adapter->rx_ps_hdr_size = IGB_RXBUFFER_128; srrctl |= adapter->rx_ps_hdr_size << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT; @@ -3473,19 +3472,16 @@ static int __igb_notify_dca(struct device *dev, void *data) struct e1000_hw *hw = &adapter->hw; unsigned long event = *(unsigned long *)data; - if (!(adapter->flags & IGB_FLAG_HAS_DCA)) - goto out; - switch (event) { case DCA_PROVIDER_ADD: /* if already enabled, don't do it again */ if (adapter->flags & IGB_FLAG_DCA_ENABLED) break; - adapter->flags |= IGB_FLAG_DCA_ENABLED; /* Always use CB2 mode, difference is masked * in the CB driver. */ wr32(E1000_DCA_CTRL, 2); if (dca_add_requester(dev) == 0) { + adapter->flags |= IGB_FLAG_DCA_ENABLED; dev_info(&adapter->pdev->dev, "DCA enabled\n"); igb_setup_dca(adapter); break; @@ -3502,7 +3498,7 @@ static int __igb_notify_dca(struct device *dev, void *data) } break; } -out: + return 0; } diff --git a/drivers/net/ne3210.c b/drivers/net/ne3210.c index fac43fd6fc87..6a843f7350ab 100644 --- a/drivers/net/ne3210.c +++ b/drivers/net/ne3210.c @@ -150,7 +150,8 @@ static int __init ne3210_eisa_probe (struct device *device) if (phys_mem < virt_to_phys(high_memory)) { printk(KERN_CRIT "ne3210.c: Card RAM overlaps with normal memory!!!\n"); printk(KERN_CRIT "ne3210.c: Use EISA SCU to set card memory below 1MB,\n"); - printk(KERN_CRIT "ne3210.c: or to an address above 0x%lx.\n", virt_to_phys(high_memory)); + printk(KERN_CRIT "ne3210.c: or to an address above 0x%llx.\n", + (u64)virt_to_phys(high_memory)); printk(KERN_CRIT "ne3210.c: Driver NOT installed.\n"); retval = -EINVAL; goto out3; diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index a75a31005fd3..f4dd9acb6877 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -210,7 +210,7 @@ #define MAX_CMD_DESCRIPTORS_HOST 1024 #define MAX_RCV_DESCRIPTORS_1G 2048 #define MAX_RCV_DESCRIPTORS_10G 4096 -#define MAX_JUMBO_RCV_DESCRIPTORS 512 +#define MAX_JUMBO_RCV_DESCRIPTORS 1024 #define MAX_LRO_RCV_DESCRIPTORS 8 #define MAX_RCVSTATUS_DESCRIPTORS MAX_RCV_DESCRIPTORS #define MAX_JUMBO_RCV_DESC MAX_JUMBO_RCV_DESCRIPTORS @@ -1203,7 +1203,7 @@ typedef struct { #define NETXEN_IS_MSI_FAMILY(adapter) \ ((adapter)->flags & (NETXEN_NIC_MSI_ENABLED | NETXEN_NIC_MSIX_ENABLED)) -#define MSIX_ENTRIES_PER_ADAPTER 8 +#define MSIX_ENTRIES_PER_ADAPTER 1 #define NETXEN_MSIX_TBL_SPACE 8192 #define NETXEN_PCI_REG_MSIX_TBL 0x44 diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index ca7c8d8050c9..ffd37bea1628 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -947,8 +947,10 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) } for (i = 0; i < n; i++) { if (netxen_rom_fast_read(adapter, 8*i + 4*offset, &val) != 0 || - netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) + netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) { + kfree(buf); return -EIO; + } buf[i].addr = addr; buf[i].data = val; diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 645d384fe87e..3b17a7936147 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -76,6 +76,7 @@ static void netxen_nic_poll_controller(struct net_device *netdev); #endif static irqreturn_t netxen_intr(int irq, void *data); static irqreturn_t netxen_msi_intr(int irq, void *data); +static irqreturn_t netxen_msix_intr(int irq, void *data); /* PCI Device ID Table */ #define ENTRY(device) \ @@ -1084,7 +1085,9 @@ static int netxen_nic_open(struct net_device *netdev) for (ring = 0; ring < adapter->max_rds_rings; ring++) netxen_post_rx_buffers(adapter, ctx, ring); } - if (NETXEN_IS_MSI_FAMILY(adapter)) + if (adapter->flags & NETXEN_NIC_MSIX_ENABLED) + handler = netxen_msix_intr; + else if (adapter->flags & NETXEN_NIC_MSI_ENABLED) handler = netxen_msi_intr; else { flags |= IRQF_SHARED; @@ -1612,6 +1615,14 @@ static irqreturn_t netxen_msi_intr(int irq, void *data) return IRQ_HANDLED; } +static irqreturn_t netxen_msix_intr(int irq, void *data) +{ + struct netxen_adapter *adapter = data; + + napi_schedule(&adapter->napi); + return IRQ_HANDLED; +} + static int netxen_nic_poll(struct napi_struct *napi, int budget) { struct netxen_adapter *adapter = container_of(napi, struct netxen_adapter, napi); diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index c38ed777f0a8..a6999403f37b 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -586,7 +586,7 @@ static int pcnet_config(struct pcmcia_device *link) } if ((link->conf.ConfigBase == 0x03c0) - && (link->manf_id == 0x149) && (link->card_id = 0xc1ab)) { + && (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) { printk(KERN_INFO "pcnet_cs: this is an AX88190 card!\n"); printk(KERN_INFO "pcnet_cs: use axnet_cs instead.\n"); goto failed; diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index ec2314246682..335da4831ab3 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -2168,7 +2168,7 @@ static void gelic_wl_connected_event(struct gelic_wl_info *wl, complete(&wl->assoc_done); netif_carrier_on(port_to_netdev(wl_port(wl))); } else - pr_debug("%s: event %#lx under wpa\n", + pr_debug("%s: event %#llx under wpa\n", __func__, event); } diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h index c1dadadfab18..e6fdce9206cc 100644 --- a/drivers/net/qlge/qlge.h +++ b/drivers/net/qlge/qlge.h @@ -787,12 +787,12 @@ struct mbox_params { struct flash_params { u8 dev_id_str[4]; - u16 size; - u16 csum; - u16 ver; - u16 sub_dev_id; + __le16 size; + __le16 csum; + __le16 ver; + __le16 sub_dev_id; u8 mac_addr[6]; - u16 res; + __le16 res; }; diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 45421c8b6010..3d1d7b6e55aa 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -641,7 +641,7 @@ static void ql_enable_all_completion_interrupts(struct ql_adapter *qdev) } -static int ql_read_flash_word(struct ql_adapter *qdev, int offset, u32 *data) +static int ql_read_flash_word(struct ql_adapter *qdev, int offset, __le32 *data) { int status = 0; /* wait for reg to come ready */ @@ -656,8 +656,11 @@ static int ql_read_flash_word(struct ql_adapter *qdev, int offset, u32 *data) FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR); if (status) goto exit; - /* get the data */ - *data = ql_read32(qdev, FLASH_DATA); + /* This data is stored on flash as an array of + * __le32. Since ql_read32() returns cpu endian + * we need to swap it back. + */ + *data = cpu_to_le32(ql_read32(qdev, FLASH_DATA)); exit: return status; } @@ -666,13 +669,20 @@ static int ql_get_flash_params(struct ql_adapter *qdev) { int i; int status; - u32 *p = (u32 *)&qdev->flash; + __le32 *p = (__le32 *)&qdev->flash; + u32 offset = 0; + + /* Second function's parameters follow the first + * function's. + */ + if (qdev->func) + offset = sizeof(qdev->flash) / sizeof(u32); if (ql_sem_spinlock(qdev, SEM_FLASH_MASK)) return -ETIMEDOUT; for (i = 0; i < sizeof(qdev->flash) / sizeof(u32); i++, p++) { - status = ql_read_flash_word(qdev, i, p); + status = ql_read_flash_word(qdev, i+offset, p); if (status) { QPRINTK(qdev, IFUP, ERR, "Error reading flash.\n"); goto exit; @@ -3826,7 +3836,7 @@ static int qlge_suspend(struct pci_dev *pdev, pm_message_t state) { struct net_device *ndev = pci_get_drvdata(pdev); struct ql_adapter *qdev = netdev_priv(ndev); - int err; + int err, i; netif_device_detach(ndev); @@ -3836,6 +3846,9 @@ static int qlge_suspend(struct pci_dev *pdev, pm_message_t state) return err; } + for (i = qdev->rss_ring_first_cq_id; i < qdev->rx_ring_count; i++) + netif_napi_del(&qdev->rx_ring[i].napi); + err = pci_save_state(pdev); if (err) return err; diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 72fd9e97c190..b2dcdb5ed8bd 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -438,7 +438,6 @@ static void r6040_down(struct net_device *dev) { struct r6040_private *lp = netdev_priv(dev); void __iomem *ioaddr = lp->base; - struct pci_dev *pdev = lp->pdev; int limit = 2048; u16 *adrp; u16 cmd; diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 2c73ca606b35..0771eb6fc6eb 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -437,6 +437,22 @@ enum features { RTL_FEATURE_GMII = (1 << 2), }; +struct rtl8169_counters { + __le64 tx_packets; + __le64 rx_packets; + __le64 tx_errors; + __le32 rx_errors; + __le16 rx_missed; + __le16 align_errors; + __le32 tx_one_collision; + __le32 tx_multi_collision; + __le64 rx_unicast; + __le64 rx_broadcast; + __le32 rx_multicast; + __le16 tx_aborted; + __le16 tx_underun; +}; + struct rtl8169_private { void __iomem *mmio_addr; /* memory map physical address */ struct pci_dev *pci_dev; /* Index of PCI device */ @@ -480,6 +496,7 @@ struct rtl8169_private { unsigned features; struct mii_if_info mii; + struct rtl8169_counters counters; }; MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>"); @@ -1100,22 +1117,6 @@ static const char rtl8169_gstrings[][ETH_GSTRING_LEN] = { "tx_underrun", }; -struct rtl8169_counters { - __le64 tx_packets; - __le64 rx_packets; - __le64 tx_errors; - __le32 rx_errors; - __le16 rx_missed; - __le16 align_errors; - __le32 tx_one_collision; - __le32 tx_multi_collision; - __le64 rx_unicast; - __le64 rx_broadcast; - __le32 rx_multicast; - __le16 tx_aborted; - __le16 tx_underun; -}; - static int rtl8169_get_sset_count(struct net_device *dev, int sset) { switch (sset) { @@ -1126,16 +1127,21 @@ static int rtl8169_get_sset_count(struct net_device *dev, int sset) } } -static void rtl8169_get_ethtool_stats(struct net_device *dev, - struct ethtool_stats *stats, u64 *data) +static void rtl8169_update_counters(struct net_device *dev) { struct rtl8169_private *tp = netdev_priv(dev); void __iomem *ioaddr = tp->mmio_addr; struct rtl8169_counters *counters; dma_addr_t paddr; u32 cmd; + int wait = 1000; - ASSERT_RTNL(); + /* + * Some chips are unable to dump tally counters when the receiver + * is disabled. + */ + if ((RTL_R8(ChipCmd) & CmdRxEnb) == 0) + return; counters = pci_alloc_consistent(tp->pci_dev, sizeof(*counters), &paddr); if (!counters) @@ -1146,31 +1152,45 @@ static void rtl8169_get_ethtool_stats(struct net_device *dev, RTL_W32(CounterAddrLow, cmd); RTL_W32(CounterAddrLow, cmd | CounterDump); - while (RTL_R32(CounterAddrLow) & CounterDump) { - if (msleep_interruptible(1)) + while (wait--) { + if ((RTL_R32(CounterAddrLow) & CounterDump) == 0) { + /* copy updated counters */ + memcpy(&tp->counters, counters, sizeof(*counters)); break; + } + udelay(10); } RTL_W32(CounterAddrLow, 0); RTL_W32(CounterAddrHigh, 0); - data[0] = le64_to_cpu(counters->tx_packets); - data[1] = le64_to_cpu(counters->rx_packets); - data[2] = le64_to_cpu(counters->tx_errors); - data[3] = le32_to_cpu(counters->rx_errors); - data[4] = le16_to_cpu(counters->rx_missed); - data[5] = le16_to_cpu(counters->align_errors); - data[6] = le32_to_cpu(counters->tx_one_collision); - data[7] = le32_to_cpu(counters->tx_multi_collision); - data[8] = le64_to_cpu(counters->rx_unicast); - data[9] = le64_to_cpu(counters->rx_broadcast); - data[10] = le32_to_cpu(counters->rx_multicast); - data[11] = le16_to_cpu(counters->tx_aborted); - data[12] = le16_to_cpu(counters->tx_underun); - pci_free_consistent(tp->pci_dev, sizeof(*counters), counters, paddr); } +static void rtl8169_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *data) +{ + struct rtl8169_private *tp = netdev_priv(dev); + + ASSERT_RTNL(); + + rtl8169_update_counters(dev); + + data[0] = le64_to_cpu(tp->counters.tx_packets); + data[1] = le64_to_cpu(tp->counters.rx_packets); + data[2] = le64_to_cpu(tp->counters.tx_errors); + data[3] = le32_to_cpu(tp->counters.rx_errors); + data[4] = le16_to_cpu(tp->counters.rx_missed); + data[5] = le16_to_cpu(tp->counters.align_errors); + data[6] = le32_to_cpu(tp->counters.tx_one_collision); + data[7] = le32_to_cpu(tp->counters.tx_multi_collision); + data[8] = le64_to_cpu(tp->counters.rx_unicast); + data[9] = le64_to_cpu(tp->counters.rx_broadcast); + data[10] = le32_to_cpu(tp->counters.rx_multicast); + data[11] = le16_to_cpu(tp->counters.tx_aborted); + data[12] = le16_to_cpu(tp->counters.tx_underun); +} + static void rtl8169_get_strings(struct net_device *dev, u32 stringset, u8 *data) { switch(stringset) { @@ -3682,6 +3702,9 @@ static int rtl8169_close(struct net_device *dev) struct rtl8169_private *tp = netdev_priv(dev); struct pci_dev *pdev = tp->pci_dev; + /* update counters before going down */ + rtl8169_update_counters(dev); + rtl8169_down(dev); free_irq(dev->irq, dev); diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 7673fd92eaf5..847e9bb0098f 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -676,9 +676,8 @@ static int efx_init_port(struct efx_nic *efx) rc = efx->phy_op->init(efx); if (rc) return rc; - efx->phy_op->reconfigure(efx); - mutex_lock(&efx->mac_lock); + efx->phy_op->reconfigure(efx); rc = falcon_switch_mac(efx); mutex_unlock(&efx->mac_lock); if (rc) @@ -686,7 +685,7 @@ static int efx_init_port(struct efx_nic *efx) efx->mac_op->reconfigure(efx); efx->port_initialized = true; - efx->stats_enabled = true; + efx_stats_enable(efx); return 0; fail: @@ -735,6 +734,7 @@ static void efx_fini_port(struct efx_nic *efx) if (!efx->port_initialized) return; + efx_stats_disable(efx); efx->phy_op->fini(efx); efx->port_initialized = false; @@ -854,20 +854,27 @@ static void efx_fini_io(struct efx_nic *efx) * interrupts across them. */ static int efx_wanted_rx_queues(void) { - cpumask_t core_mask; + cpumask_var_t core_mask; int count; int cpu; - cpus_clear(core_mask); + if (!alloc_cpumask_var(&core_mask, GFP_KERNEL)) { + printk(KERN_WARNING + "efx.c: allocation failure, irq balancing hobbled\n"); + return 1; + } + + cpumask_clear(core_mask); count = 0; for_each_online_cpu(cpu) { - if (!cpu_isset(cpu, core_mask)) { + if (!cpumask_test_cpu(cpu, core_mask)) { ++count; - cpus_or(core_mask, core_mask, - topology_core_siblings(cpu)); + cpumask_or(core_mask, core_mask, + topology_core_cpumask(cpu)); } } + free_cpumask_var(core_mask); return count; } @@ -1361,6 +1368,20 @@ static int efx_net_stop(struct net_device *net_dev) return 0; } +void efx_stats_disable(struct efx_nic *efx) +{ + spin_lock(&efx->stats_lock); + ++efx->stats_disable_count; + spin_unlock(&efx->stats_lock); +} + +void efx_stats_enable(struct efx_nic *efx) +{ + spin_lock(&efx->stats_lock); + --efx->stats_disable_count; + spin_unlock(&efx->stats_lock); +} + /* Context: process, dev_base_lock or RTNL held, non-blocking. */ static struct net_device_stats *efx_net_stats(struct net_device *net_dev) { @@ -1369,12 +1390,12 @@ static struct net_device_stats *efx_net_stats(struct net_device *net_dev) struct net_device_stats *stats = &net_dev->stats; /* Update stats if possible, but do not wait if another thread - * is updating them (or resetting the NIC); slightly stale - * stats are acceptable. + * is updating them or if MAC stats fetches are temporarily + * disabled; slightly stale stats are acceptable. */ if (!spin_trylock(&efx->stats_lock)) return stats; - if (efx->stats_enabled) { + if (!efx->stats_disable_count) { efx->mac_op->update_stats(efx); falcon_update_nic_stats(efx); } @@ -1622,16 +1643,12 @@ static void efx_unregister_netdev(struct efx_nic *efx) /* Tears down the entire software state and most of the hardware state * before reset. */ -void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd) +void efx_reset_down(struct efx_nic *efx, enum reset_type method, + struct ethtool_cmd *ecmd) { EFX_ASSERT_RESET_SERIALISED(efx); - /* The net_dev->get_stats handler is quite slow, and will fail - * if a fetch is pending over reset. Serialise against it. */ - spin_lock(&efx->stats_lock); - efx->stats_enabled = false; - spin_unlock(&efx->stats_lock); - + efx_stats_disable(efx); efx_stop_all(efx); mutex_lock(&efx->mac_lock); mutex_lock(&efx->spi_lock); @@ -1639,6 +1656,8 @@ void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd) efx->phy_op->get_settings(efx, ecmd); efx_fini_channels(efx); + if (efx->port_initialized && method != RESET_TYPE_INVISIBLE) + efx->phy_op->fini(efx); } /* This function will always ensure that the locks acquired in @@ -1646,7 +1665,8 @@ void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd) * that we were unable to reinitialise the hardware, and the * driver should be disabled. If ok is false, then the rx and tx * engines are not restarted, pending a RESET_DISABLE. */ -int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok) +int efx_reset_up(struct efx_nic *efx, enum reset_type method, + struct ethtool_cmd *ecmd, bool ok) { int rc; @@ -1658,6 +1678,15 @@ int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok) ok = false; } + if (efx->port_initialized && method != RESET_TYPE_INVISIBLE) { + if (ok) { + rc = efx->phy_op->init(efx); + if (rc) + ok = false; + } else + efx->port_initialized = false; + } + if (ok) { efx_init_channels(efx); @@ -1670,7 +1699,7 @@ int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok) if (ok) { efx_start_all(efx); - efx->stats_enabled = true; + efx_stats_enable(efx); } return rc; } @@ -1702,7 +1731,7 @@ static int efx_reset(struct efx_nic *efx) EFX_INFO(efx, "resetting (%d)\n", method); - efx_reset_down(efx, &ecmd); + efx_reset_down(efx, method, &ecmd); rc = falcon_reset_hw(efx, method); if (rc) { @@ -1721,10 +1750,10 @@ static int efx_reset(struct efx_nic *efx) /* Leave device stopped if necessary */ if (method == RESET_TYPE_DISABLE) { - efx_reset_up(efx, &ecmd, false); + efx_reset_up(efx, method, &ecmd, false); rc = -EIO; } else { - rc = efx_reset_up(efx, &ecmd, true); + rc = efx_reset_up(efx, method, &ecmd, true); } out_disable: @@ -1876,6 +1905,7 @@ static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type, efx->rx_checksum_enabled = true; spin_lock_init(&efx->netif_stop_lock); spin_lock_init(&efx->stats_lock); + efx->stats_disable_count = 1; mutex_init(&efx->mac_lock); efx->mac_op = &efx_dummy_mac_operations; efx->phy_op = &efx_dummy_phy_operations; diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h index 0dd7a532c78a..55d0f131b0e9 100644 --- a/drivers/net/sfc/efx.h +++ b/drivers/net/sfc/efx.h @@ -36,13 +36,16 @@ extern void efx_process_channel_now(struct efx_channel *channel); extern void efx_flush_queues(struct efx_nic *efx); /* Ports */ +extern void efx_stats_disable(struct efx_nic *efx); +extern void efx_stats_enable(struct efx_nic *efx); extern void efx_reconfigure_port(struct efx_nic *efx); extern void __efx_reconfigure_port(struct efx_nic *efx); /* Reset handling */ -extern void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd); -extern int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, - bool ok); +extern void efx_reset_down(struct efx_nic *efx, enum reset_type method, + struct ethtool_cmd *ecmd); +extern int efx_reset_up(struct efx_nic *efx, enum reset_type method, + struct ethtool_cmd *ecmd, bool ok); /* Global */ extern void efx_schedule_reset(struct efx_nic *efx, enum reset_type type); diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c index 53d259e90187..7b5924c039b3 100644 --- a/drivers/net/sfc/ethtool.c +++ b/drivers/net/sfc/ethtool.c @@ -219,9 +219,6 @@ int efx_ethtool_set_settings(struct net_device *net_dev, struct efx_nic *efx = netdev_priv(net_dev); int rc; - if (EFX_WORKAROUND_13963(efx) && !ecmd->autoneg) - return -EINVAL; - /* Falcon GMAC does not support 1000Mbps HD */ if (ecmd->speed == SPEED_1000 && ecmd->duplex != DUPLEX_FULL) { EFX_LOG(efx, "rejecting unsupported 1000Mbps HD" diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index 5b9f2d9cc4ed..064307c2277e 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -338,10 +338,10 @@ static int falcon_alloc_special_buffer(struct efx_nic *efx, nic_data->next_buffer_table += buffer->entries; EFX_LOG(efx, "allocating special buffers %d-%d at %llx+%x " - "(virt %p phys %lx)\n", buffer->index, + "(virt %p phys %llx)\n", buffer->index, buffer->index + buffer->entries - 1, - (unsigned long long)buffer->dma_addr, len, - buffer->addr, virt_to_phys(buffer->addr)); + (u64)buffer->dma_addr, len, + buffer->addr, (u64)virt_to_phys(buffer->addr)); return 0; } @@ -353,10 +353,10 @@ static void falcon_free_special_buffer(struct efx_nic *efx, return; EFX_LOG(efx, "deallocating special buffers %d-%d at %llx+%x " - "(virt %p phys %lx)\n", buffer->index, + "(virt %p phys %llx)\n", buffer->index, buffer->index + buffer->entries - 1, - (unsigned long long)buffer->dma_addr, buffer->len, - buffer->addr, virt_to_phys(buffer->addr)); + (u64)buffer->dma_addr, buffer->len, + buffer->addr, (u64)virt_to_phys(buffer->addr)); pci_free_consistent(efx->pci_dev, buffer->len, buffer->addr, buffer->dma_addr); @@ -824,10 +824,6 @@ static void falcon_handle_rx_not_ok(struct efx_rx_queue *rx_queue, rx_ev_pause_frm ? " [PAUSE]" : ""); } #endif - - if (unlikely(rx_ev_eth_crc_err && EFX_WORKAROUND_10750(efx) && - efx->phy_type == PHY_TYPE_SFX7101)) - tenxpress_crc_err(efx); } /* Handle receive events that are not in-order. */ @@ -1887,7 +1883,7 @@ static int falcon_reset_macs(struct efx_nic *efx) /* MAC stats will fail whilst the TX fifo is draining. Serialise * the drain sequence with the statistics fetch */ - spin_lock(&efx->stats_lock); + efx_stats_disable(efx); falcon_read(efx, ®, MAC0_CTRL_REG_KER); EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0, 1); @@ -1917,7 +1913,7 @@ static int falcon_reset_macs(struct efx_nic *efx) udelay(10); } - spin_unlock(&efx->stats_lock); + efx_stats_enable(efx); /* If we've reset the EM block and the link is up, then * we'll have to kick the XAUI link so the PHY can recover */ @@ -2277,6 +2273,10 @@ int falcon_switch_mac(struct efx_nic *efx) struct efx_mac_operations *old_mac_op = efx->mac_op; efx_oword_t nic_stat; unsigned strap_val; + int rc = 0; + + /* Don't try to fetch MAC stats while we're switching MACs */ + efx_stats_disable(efx); /* Internal loopbacks override the phy speed setting */ if (efx->loopback_mode == LOOPBACK_GMAC) { @@ -2287,16 +2287,12 @@ int falcon_switch_mac(struct efx_nic *efx) efx->link_fd = true; } + WARN_ON(!mutex_is_locked(&efx->mac_lock)); efx->mac_op = (EFX_IS10G(efx) ? &falcon_xmac_operations : &falcon_gmac_operations); - if (old_mac_op == efx->mac_op) - return 0; - - WARN_ON(!mutex_is_locked(&efx->mac_lock)); - - /* Not all macs support a mac-level link state */ - efx->mac_up = true; + /* Always push the NIC_STAT_REG setting even if the mac hasn't + * changed, because this function is run post online reset */ falcon_read(efx, &nic_stat, NIC_STAT_REG); strap_val = EFX_IS10G(efx) ? 5 : 3; if (falcon_rev(efx) >= FALCON_REV_B0) { @@ -2309,9 +2305,17 @@ int falcon_switch_mac(struct efx_nic *efx) BUG_ON(EFX_OWORD_FIELD(nic_stat, STRAP_PINS) != strap_val); } + if (old_mac_op == efx->mac_op) + goto out; EFX_LOG(efx, "selected %cMAC\n", EFX_IS10G(efx) ? 'X' : 'G'); - return falcon_reset_macs(efx); + /* Not all macs support a mac-level link state */ + efx->mac_up = true; + + rc = falcon_reset_macs(efx); +out: + efx_stats_enable(efx); + return rc; } /* This call is responsible for hooking in the MAC and PHY operations */ @@ -2339,10 +2343,10 @@ int falcon_probe_port(struct efx_nic *efx) FALCON_MAC_STATS_SIZE); if (rc) return rc; - EFX_LOG(efx, "stats buffer at %llx (virt %p phys %lx)\n", - (unsigned long long)efx->stats_buffer.dma_addr, + EFX_LOG(efx, "stats buffer at %llx (virt %p phys %llx)\n", + (u64)efx->stats_buffer.dma_addr, efx->stats_buffer.addr, - virt_to_phys(efx->stats_buffer.addr)); + (u64)virt_to_phys(efx->stats_buffer.addr)); return 0; } @@ -2917,9 +2921,9 @@ int falcon_probe_nic(struct efx_nic *efx) goto fail4; BUG_ON(efx->irq_status.dma_addr & 0x0f); - EFX_LOG(efx, "INT_KER at %llx (virt %p phys %lx)\n", - (unsigned long long)efx->irq_status.dma_addr, - efx->irq_status.addr, virt_to_phys(efx->irq_status.addr)); + EFX_LOG(efx, "INT_KER at %llx (virt %p phys %llx)\n", + (u64)efx->irq_status.dma_addr, + efx->irq_status.addr, (u64)virt_to_phys(efx->irq_status.addr)); falcon_probe_spi_devices(efx); diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c index f6a16428113d..f9e2f95c3b48 100644 --- a/drivers/net/sfc/mdio_10g.c +++ b/drivers/net/sfc/mdio_10g.c @@ -15,6 +15,7 @@ #include "net_driver.h" #include "mdio_10g.h" #include "boards.h" +#include "workarounds.h" int mdio_clause45_reset_mmd(struct efx_nic *port, int mmd, int spins, int spintime) @@ -179,17 +180,12 @@ bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask) return false; else if (efx_phy_mode_disabled(efx->phy_mode)) return false; - else if (efx->loopback_mode == LOOPBACK_PHYXS) { + else if (efx->loopback_mode == LOOPBACK_PHYXS) mmd_mask &= ~(MDIO_MMDREG_DEVS_PHYXS | MDIO_MMDREG_DEVS_PCS | MDIO_MMDREG_DEVS_PMAPMD | MDIO_MMDREG_DEVS_AN); - if (!mmd_mask) { - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS, - MDIO_PHYXS_STATUS2); - return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN)); - } - } else if (efx->loopback_mode == LOOPBACK_PCS) + else if (efx->loopback_mode == LOOPBACK_PCS) mmd_mask &= ~(MDIO_MMDREG_DEVS_PCS | MDIO_MMDREG_DEVS_PMAPMD | MDIO_MMDREG_DEVS_AN); @@ -197,6 +193,13 @@ bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask) mmd_mask &= ~(MDIO_MMDREG_DEVS_PMAPMD | MDIO_MMDREG_DEVS_AN); + if (!mmd_mask) { + /* Use presence of XGMII faults in leui of link state */ + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS, + MDIO_PHYXS_STATUS2); + return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN)); + } + while (mmd_mask) { if (mmd_mask & 1) { /* Double reads because link state is latched, and a @@ -263,7 +266,7 @@ void mdio_clause45_set_mmds_lpower(struct efx_nic *efx, } } -static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp) +static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr) { int phy_id = efx->mii.phy_id; u32 result = 0; @@ -278,9 +281,6 @@ static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp) result |= ADVERTISED_100baseT_Half; if (reg & ADVERTISE_100FULL) result |= ADVERTISED_100baseT_Full; - if (reg & LPA_RESV) - result |= xnp; - return result; } @@ -310,7 +310,7 @@ void mdio_clause45_get_settings(struct efx_nic *efx, */ void mdio_clause45_get_settings_ext(struct efx_nic *efx, struct ethtool_cmd *ecmd, - u32 xnp, u32 xnp_lpa) + u32 npage_adv, u32 npage_lpa) { int phy_id = efx->mii.phy_id; int reg; @@ -361,8 +361,8 @@ void mdio_clause45_get_settings_ext(struct efx_nic *efx, ecmd->autoneg = AUTONEG_ENABLE; ecmd->advertising |= ADVERTISED_Autoneg | - mdio_clause45_get_an(efx, - MDIO_AN_ADVERTISE, xnp); + mdio_clause45_get_an(efx, MDIO_AN_ADVERTISE) | + npage_adv; } else ecmd->autoneg = AUTONEG_DISABLE; } else @@ -371,27 +371,30 @@ void mdio_clause45_get_settings_ext(struct efx_nic *efx, if (ecmd->autoneg) { /* If AN is complete, report best common mode, * otherwise report best advertised mode. */ - u32 common = ecmd->advertising; + u32 modes = 0; if (mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_MMDREG_STAT1) & - (1 << MDIO_AN_STATUS_AN_DONE_LBN)) { - common &= mdio_clause45_get_an(efx, MDIO_AN_LPA, - xnp_lpa); - } - if (common & ADVERTISED_10000baseT_Full) { + (1 << MDIO_AN_STATUS_AN_DONE_LBN)) + modes = (ecmd->advertising & + (mdio_clause45_get_an(efx, MDIO_AN_LPA) | + npage_lpa)); + if (modes == 0) + modes = ecmd->advertising; + + if (modes & ADVERTISED_10000baseT_Full) { ecmd->speed = SPEED_10000; ecmd->duplex = DUPLEX_FULL; - } else if (common & (ADVERTISED_1000baseT_Full | - ADVERTISED_1000baseT_Half)) { + } else if (modes & (ADVERTISED_1000baseT_Full | + ADVERTISED_1000baseT_Half)) { ecmd->speed = SPEED_1000; - ecmd->duplex = !!(common & ADVERTISED_1000baseT_Full); - } else if (common & (ADVERTISED_100baseT_Full | - ADVERTISED_100baseT_Half)) { + ecmd->duplex = !!(modes & ADVERTISED_1000baseT_Full); + } else if (modes & (ADVERTISED_100baseT_Full | + ADVERTISED_100baseT_Half)) { ecmd->speed = SPEED_100; - ecmd->duplex = !!(common & ADVERTISED_100baseT_Full); + ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full); } else { ecmd->speed = SPEED_10; - ecmd->duplex = !!(common & ADVERTISED_10baseT_Full); + ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full); } } else { /* Report forced settings */ @@ -415,7 +418,7 @@ int mdio_clause45_set_settings(struct efx_nic *efx, int phy_id = efx->mii.phy_id; struct ethtool_cmd prev; u32 required; - int ctrl1_bits, reg; + int reg; efx->phy_op->get_settings(efx, &prev); @@ -430,99 +433,83 @@ int mdio_clause45_set_settings(struct efx_nic *efx, if (prev.port != PORT_TP || ecmd->port != PORT_TP) return -EINVAL; - /* Check that PHY supports these settings and work out the - * basic control bits */ - if (ecmd->duplex) { + /* Check that PHY supports these settings */ + if (ecmd->autoneg) { + required = SUPPORTED_Autoneg; + } else if (ecmd->duplex) { switch (ecmd->speed) { - case SPEED_10: - ctrl1_bits = BMCR_FULLDPLX; - required = SUPPORTED_10baseT_Full; - break; - case SPEED_100: - ctrl1_bits = BMCR_SPEED100 | BMCR_FULLDPLX; - required = SUPPORTED_100baseT_Full; - break; - case SPEED_1000: - ctrl1_bits = BMCR_SPEED1000 | BMCR_FULLDPLX; - required = SUPPORTED_1000baseT_Full; - break; - case SPEED_10000: - ctrl1_bits = (BMCR_SPEED1000 | BMCR_SPEED100 | - BMCR_FULLDPLX); - required = SUPPORTED_10000baseT_Full; - break; - default: - return -EINVAL; + case SPEED_10: required = SUPPORTED_10baseT_Full; break; + case SPEED_100: required = SUPPORTED_100baseT_Full; break; + default: return -EINVAL; } } else { switch (ecmd->speed) { - case SPEED_10: - ctrl1_bits = 0; - required = SUPPORTED_10baseT_Half; - break; - case SPEED_100: - ctrl1_bits = BMCR_SPEED100; - required = SUPPORTED_100baseT_Half; - break; - case SPEED_1000: - ctrl1_bits = BMCR_SPEED1000; - required = SUPPORTED_1000baseT_Half; - break; - default: - return -EINVAL; + case SPEED_10: required = SUPPORTED_10baseT_Half; break; + case SPEED_100: required = SUPPORTED_100baseT_Half; break; + default: return -EINVAL; } } - if (ecmd->autoneg) - required |= SUPPORTED_Autoneg; required |= ecmd->advertising; if (required & ~prev.supported) return -EINVAL; - /* Set the basic control bits */ - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, - MDIO_MMDREG_CTRL1); - reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | 0x003c); - reg |= ctrl1_bits; - mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, MDIO_MMDREG_CTRL1, - reg); - - /* Set the AN registers */ - if (ecmd->autoneg != prev.autoneg || - ecmd->advertising != prev.advertising) { - bool xnp = false; - - if (efx->phy_op->set_xnp_advertise) - xnp = efx->phy_op->set_xnp_advertise(efx, - ecmd->advertising); - - if (ecmd->autoneg) { - reg = 0; - if (ecmd->advertising & ADVERTISED_10baseT_Half) - reg |= ADVERTISE_10HALF; - if (ecmd->advertising & ADVERTISED_10baseT_Full) - reg |= ADVERTISE_10FULL; - if (ecmd->advertising & ADVERTISED_100baseT_Half) - reg |= ADVERTISE_100HALF; - if (ecmd->advertising & ADVERTISED_100baseT_Full) - reg |= ADVERTISE_100FULL; - if (xnp) - reg |= ADVERTISE_RESV; - mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, - MDIO_AN_ADVERTISE, reg); - } + if (ecmd->autoneg) { + bool xnp = (ecmd->advertising & ADVERTISED_10000baseT_Full + || EFX_WORKAROUND_13204(efx)); + + /* Set up the base page */ + reg = ADVERTISE_CSMA; + if (ecmd->advertising & ADVERTISED_10baseT_Half) + reg |= ADVERTISE_10HALF; + if (ecmd->advertising & ADVERTISED_10baseT_Full) + reg |= ADVERTISE_10FULL; + if (ecmd->advertising & ADVERTISED_100baseT_Half) + reg |= ADVERTISE_100HALF; + if (ecmd->advertising & ADVERTISED_100baseT_Full) + reg |= ADVERTISE_100FULL; + if (xnp) + reg |= ADVERTISE_RESV; + else if (ecmd->advertising & (ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseT_Full)) + reg |= ADVERTISE_NPAGE; + reg |= efx_fc_advertise(efx->wanted_fc); + mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_ADVERTISE, reg); + + /* Set up the (extended) next page if necessary */ + if (efx->phy_op->set_npage_adv) + efx->phy_op->set_npage_adv(efx, ecmd->advertising); + /* Enable and restart AN */ reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_MMDREG_CTRL1); - if (ecmd->autoneg) - reg |= BMCR_ANENABLE | BMCR_ANRESTART; - else - reg &= ~BMCR_ANENABLE; + reg |= BMCR_ANENABLE; + if (!(EFX_WORKAROUND_15195(efx) && + LOOPBACK_MASK(efx) & efx->phy_op->loopbacks)) + reg |= BMCR_ANRESTART; if (xnp) reg |= 1 << MDIO_AN_CTRL_XNP_LBN; else reg &= ~(1 << MDIO_AN_CTRL_XNP_LBN); mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, MDIO_MMDREG_CTRL1, reg); + } else { + /* Disable AN */ + mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN, + MDIO_MMDREG_CTRL1, + __ffs(BMCR_ANENABLE), false); + + /* Set the basic control bits */ + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, + MDIO_MMDREG_CTRL1); + reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | + 0x003c); + if (ecmd->speed == SPEED_100) + reg |= BMCR_SPEED100; + if (ecmd->duplex) + reg |= BMCR_FULLDPLX; + mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, + MDIO_MMDREG_CTRL1, reg); } return 0; diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h index 09bf801d0569..8ba49773ce7e 100644 --- a/drivers/net/sfc/mdio_10g.h +++ b/drivers/net/sfc/mdio_10g.h @@ -155,7 +155,8 @@ #define MDIO_AN_XNP 22 #define MDIO_AN_LPA_XNP 25 -#define MDIO_AN_10GBT_ADVERTISE 32 +#define MDIO_AN_10GBT_CTRL 32 +#define MDIO_AN_10GBT_CTRL_ADV_10G_LBN 12 #define MDIO_AN_10GBT_STATUS (33) #define MDIO_AN_10GBT_STATUS_MS_FLT_LBN (15) /* MASTER/SLAVE config fault */ #define MDIO_AN_10GBT_STATUS_MS_LBN (14) /* MASTER/SLAVE config */ diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 5f255f75754e..e019ad1fb9a0 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -566,7 +566,7 @@ struct efx_mac_operations { * @poll: Poll for hardware state. Serialised by the mac_lock. * @get_settings: Get ethtool settings. Serialised by the mac_lock. * @set_settings: Set ethtool settings. Serialised by the mac_lock. - * @set_xnp_advertise: Set abilities advertised in Extended Next Page + * @set_npage_adv: Set abilities advertised in (Extended) Next Page * (only needed where AN bit is set in mmds) * @num_tests: Number of PHY-specific tests/results * @test_names: Names of the tests/results @@ -586,7 +586,7 @@ struct efx_phy_operations { struct ethtool_cmd *ecmd); int (*set_settings) (struct efx_nic *efx, struct ethtool_cmd *ecmd); - bool (*set_xnp_advertise) (struct efx_nic *efx, u32); + void (*set_npage_adv) (struct efx_nic *efx, u32); u32 num_tests; const char *const *test_names; int (*run_tests) (struct efx_nic *efx, int *results, unsigned flags); @@ -754,8 +754,7 @@ union efx_multicast_hash { * &struct net_device_stats. * @stats_buffer: DMA buffer for statistics * @stats_lock: Statistics update lock. Serialises statistics fetches - * @stats_enabled: Temporarily disable statistics fetches. - * Serialised by @stats_lock + * @stats_disable_count: Nest count for disabling statistics fetches * @mac_op: MAC interface * @mac_address: Permanent MAC address * @phy_type: PHY type @@ -837,7 +836,7 @@ struct efx_nic { struct efx_mac_stats mac_stats; struct efx_buffer stats_buffer; spinlock_t stats_lock; - bool stats_enabled; + unsigned int stats_disable_count; struct efx_mac_operations *mac_op; unsigned char mac_address[ETH_ALEN]; diff --git a/drivers/net/sfc/phy.h b/drivers/net/sfc/phy.h index 58c493ef81bb..07e855c148bc 100644 --- a/drivers/net/sfc/phy.h +++ b/drivers/net/sfc/phy.h @@ -17,7 +17,6 @@ extern struct efx_phy_operations falcon_sfx7101_phy_ops; extern struct efx_phy_operations falcon_sft9001_phy_ops; extern void tenxpress_phy_blink(struct efx_nic *efx, bool blink); -extern void tenxpress_crc_err(struct efx_nic *efx); /**************************************************************************** * Exported functions from the driver for XFP optical PHYs diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c index dba0d64d50cd..0a598084c513 100644 --- a/drivers/net/sfc/selftest.c +++ b/drivers/net/sfc/selftest.c @@ -665,6 +665,7 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests, { enum efx_loopback_mode loopback_mode = efx->loopback_mode; int phy_mode = efx->phy_mode; + enum reset_type reset_method = RESET_TYPE_INVISIBLE; struct ethtool_cmd ecmd; struct efx_channel *channel; int rc_test = 0, rc_reset = 0, rc; @@ -718,21 +719,21 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests, mutex_unlock(&efx->mac_lock); /* free up all consumers of SRAM (including all the queues) */ - efx_reset_down(efx, &ecmd); + efx_reset_down(efx, reset_method, &ecmd); rc = efx_test_chip(efx, tests); if (rc && !rc_test) rc_test = rc; /* reset the chip to recover from the register test */ - rc_reset = falcon_reset_hw(efx, RESET_TYPE_ALL); + rc_reset = falcon_reset_hw(efx, reset_method); /* Ensure that the phy is powered and out of loopback * for the bist and loopback tests */ efx->phy_mode &= ~PHY_MODE_LOW_POWER; efx->loopback_mode = LOOPBACK_NONE; - rc = efx_reset_up(efx, &ecmd, rc_reset == 0); + rc = efx_reset_up(efx, reset_method, &ecmd, rc_reset == 0); if (rc && !rc_reset) rc_reset = rc; diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index 16b80acb9992..cb25ae5b257a 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -186,19 +186,22 @@ static int sfn4111t_reset(struct efx_nic *efx) { efx_oword_t reg; - /* GPIO pins are also used for I2C, so block that temporarily */ + /* GPIO 3 and the GPIO register are shared with I2C, so block that */ mutex_lock(&efx->i2c_adap.bus_lock); + /* Pull RST_N (GPIO 2) low then let it up again, setting the + * FLASH_CFG_1 strap (GPIO 3) appropriately. Only change the + * output enables; the output levels should always be 0 (low) + * and we rely on external pull-ups. */ falcon_read(efx, ®, GPIO_CTL_REG_KER); EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, true); - EFX_SET_OWORD_FIELD(reg, GPIO2_OUT, false); falcon_write(efx, ®, GPIO_CTL_REG_KER); msleep(1000); - EFX_SET_OWORD_FIELD(reg, GPIO2_OUT, true); - EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, true); - EFX_SET_OWORD_FIELD(reg, GPIO3_OUT, - !(efx->phy_mode & PHY_MODE_SPECIAL)); + EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, false); + EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, + !!(efx->phy_mode & PHY_MODE_SPECIAL)); falcon_write(efx, ®, GPIO_CTL_REG_KER); + msleep(1); mutex_unlock(&efx->i2c_adap.bus_lock); @@ -232,12 +235,18 @@ static ssize_t set_phy_flash_cfg(struct device *dev, } else if (efx->state != STATE_RUNNING || netif_running(efx->net_dev)) { err = -EBUSY; } else { + /* Reset the PHY, reconfigure the MAC and enable/disable + * MAC stats accordingly. */ efx->phy_mode = new_mode; + if (new_mode & PHY_MODE_SPECIAL) + efx_stats_disable(efx); if (efx->board_info.type == EFX_BOARD_SFE4001) err = sfe4001_poweron(efx); else err = sfn4111t_reset(efx); efx_reconfigure_port(efx); + if (!(new_mode & PHY_MODE_SPECIAL)) + efx_stats_enable(efx); } rtnl_unlock(); @@ -326,6 +335,11 @@ int sfe4001_init(struct efx_nic *efx) efx->board_info.monitor = sfe4001_check_hw; efx->board_info.fini = sfe4001_fini; + if (efx->phy_mode & PHY_MODE_SPECIAL) { + /* PHY won't generate a 156.25 MHz clock and MAC stats fetch + * will fail. */ + efx_stats_disable(efx); + } rc = sfe4001_poweron(efx); if (rc) goto fail_ioexp; @@ -372,17 +386,25 @@ static void sfn4111t_fini(struct efx_nic *efx) i2c_unregister_device(efx->board_info.hwmon_client); } -static struct i2c_board_info sfn4111t_hwmon_info = { +static struct i2c_board_info sfn4111t_a0_hwmon_info = { I2C_BOARD_INFO("max6647", 0x4e), .irq = -1, }; +static struct i2c_board_info sfn4111t_r5_hwmon_info = { + I2C_BOARD_INFO("max6646", 0x4d), + .irq = -1, +}; + int sfn4111t_init(struct efx_nic *efx) { int rc; efx->board_info.hwmon_client = - i2c_new_device(&efx->i2c_adap, &sfn4111t_hwmon_info); + i2c_new_device(&efx->i2c_adap, + (efx->board_info.minor < 5) ? + &sfn4111t_a0_hwmon_info : + &sfn4111t_r5_hwmon_info); if (!efx->board_info.hwmon_client) return -EIO; @@ -394,8 +416,10 @@ int sfn4111t_init(struct efx_nic *efx) if (rc) goto fail_hwmon; - if (efx->phy_mode & PHY_MODE_SPECIAL) + if (efx->phy_mode & PHY_MODE_SPECIAL) { + efx_stats_disable(efx); sfn4111t_reset(efx); + } return 0; diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index 9ecb77da9545..f0efd246962c 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -67,6 +67,8 @@ #define PMA_PMD_EXT_CLK312_WIDTH 1 #define PMA_PMD_EXT_LPOWER_LBN 12 #define PMA_PMD_EXT_LPOWER_WIDTH 1 +#define PMA_PMD_EXT_ROBUST_LBN 14 +#define PMA_PMD_EXT_ROBUST_WIDTH 1 #define PMA_PMD_EXT_SSR_LBN 15 #define PMA_PMD_EXT_SSR_WIDTH 1 @@ -177,35 +179,24 @@ #define C22EXT_STATUS_LINK_LBN 2 #define C22EXT_STATUS_LINK_WIDTH 1 -#define C22EXT_MSTSLV_REG 49162 -#define C22EXT_MSTSLV_1000_HD_LBN 10 -#define C22EXT_MSTSLV_1000_HD_WIDTH 1 -#define C22EXT_MSTSLV_1000_FD_LBN 11 -#define C22EXT_MSTSLV_1000_FD_WIDTH 1 +#define C22EXT_MSTSLV_CTRL 49161 +#define C22EXT_MSTSLV_CTRL_ADV_1000_HD_LBN 8 +#define C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN 9 + +#define C22EXT_MSTSLV_STATUS 49162 +#define C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN 10 +#define C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN 11 /* Time to wait between powering down the LNPGA and turning off the power * rails */ #define LNPGA_PDOWN_WAIT (HZ / 5) -static int crc_error_reset_threshold = 100; -module_param(crc_error_reset_threshold, int, 0644); -MODULE_PARM_DESC(crc_error_reset_threshold, - "Max number of CRC errors before XAUI reset"); - struct tenxpress_phy_data { enum efx_loopback_mode loopback_mode; - atomic_t bad_crc_count; enum efx_phy_mode phy_mode; int bad_lp_tries; }; -void tenxpress_crc_err(struct efx_nic *efx) -{ - struct tenxpress_phy_data *phy_data = efx->phy_data; - if (phy_data != NULL) - atomic_inc(&phy_data->bad_crc_count); -} - static ssize_t show_phy_short_reach(struct device *dev, struct device_attribute *attr, char *buf) { @@ -284,7 +275,9 @@ static int tenxpress_init(struct efx_nic *efx) PMA_PMD_XCONTROL_REG); reg |= ((1 << PMA_PMD_EXT_GMII_EN_LBN) | (1 << PMA_PMD_EXT_CLK_OUT_LBN) | - (1 << PMA_PMD_EXT_CLK312_LBN)); + (1 << PMA_PMD_EXT_CLK312_LBN) | + (1 << PMA_PMD_EXT_ROBUST_LBN)); + mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT, @@ -346,6 +339,7 @@ static int tenxpress_phy_init(struct efx_nic *efx) rc = tenxpress_init(efx); if (rc < 0) goto fail; + mdio_clause45_set_pause(efx); if (efx->phy_type == PHY_TYPE_SFT9001B) { rc = device_create_file(&efx->pci_dev->dev, @@ -376,8 +370,8 @@ static int tenxpress_special_reset(struct efx_nic *efx) /* The XGMAC clock is driven from the SFC7101/SFT9001 312MHz clock, so * a special software reset can glitch the XGMAC sufficiently for stats - * requests to fail. Since we don't often special_reset, just lock. */ - spin_lock(&efx->stats_lock); + * requests to fail. */ + efx_stats_disable(efx); /* Initiate reset */ reg = mdio_clause45_read(efx, efx->mii.phy_id, @@ -392,17 +386,17 @@ static int tenxpress_special_reset(struct efx_nic *efx) rc = mdio_clause45_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS); if (rc < 0) - goto unlock; + goto out; /* Try and reconfigure the device */ rc = tenxpress_init(efx); if (rc < 0) - goto unlock; + goto out; /* Wait for the XGXS state machine to churn */ mdelay(10); -unlock: - spin_unlock(&efx->stats_lock); +out: + efx_stats_enable(efx); return rc; } @@ -520,7 +514,7 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx) { struct tenxpress_phy_data *phy_data = efx->phy_data; struct ethtool_cmd ecmd; - bool phy_mode_change, loop_reset, loop_toggle, loopback; + bool phy_mode_change, loop_reset; if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) { phy_data->phy_mode = efx->phy_mode; @@ -531,12 +525,10 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx) phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL && phy_data->phy_mode != PHY_MODE_NORMAL); - loopback = LOOPBACK_MASK(efx) & efx->phy_op->loopbacks; - loop_toggle = LOOPBACK_CHANGED(phy_data, efx, efx->phy_op->loopbacks); loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, efx->phy_op->loopbacks) || LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY)); - if (loop_reset || loop_toggle || loopback || phy_mode_change) { + if (loop_reset || phy_mode_change) { int rc; efx->phy_op->get_settings(efx, &ecmd); @@ -551,20 +543,6 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx) falcon_reset_xaui(efx); } - if (efx->phy_type != PHY_TYPE_SFX7101) { - /* Only change autoneg once, on coming out or - * going into loopback */ - if (loop_toggle) - ecmd.autoneg = !loopback; - if (loopback) { - ecmd.duplex = DUPLEX_FULL; - if (efx->loopback_mode == LOOPBACK_GPHY) - ecmd.speed = SPEED_1000; - else - ecmd.speed = SPEED_10000; - } - } - rc = efx->phy_op->set_settings(efx, &ecmd); WARN_ON(rc); } @@ -623,13 +601,6 @@ static void tenxpress_phy_poll(struct efx_nic *efx) if (phy_data->phy_mode != PHY_MODE_NORMAL) return; - - if (EFX_WORKAROUND_10750(efx) && - atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) { - EFX_ERR(efx, "Resetting XAUI due to too many CRC errors\n"); - falcon_reset_xaui(efx); - atomic_set(&phy_data->bad_crc_count, 0); - } } static void tenxpress_phy_fini(struct efx_nic *efx) @@ -772,107 +743,76 @@ reset: return rc; } -static u32 tenxpress_get_xnp_lpa(struct efx_nic *efx) +static void +tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) { - int phy = efx->mii.phy_id; - u32 lpa = 0; + int phy_id = efx->mii.phy_id; + u32 adv = 0, lpa = 0; int reg; if (efx->phy_type != PHY_TYPE_SFX7101) { - reg = mdio_clause45_read(efx, phy, MDIO_MMD_C22EXT, - C22EXT_MSTSLV_REG); - if (reg & (1 << C22EXT_MSTSLV_1000_HD_LBN)) + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT, + C22EXT_MSTSLV_CTRL); + if (reg & (1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN)) + adv |= ADVERTISED_1000baseT_Full; + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT, + C22EXT_MSTSLV_STATUS); + if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN)) lpa |= ADVERTISED_1000baseT_Half; - if (reg & (1 << C22EXT_MSTSLV_1000_FD_LBN)) + if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN)) lpa |= ADVERTISED_1000baseT_Full; } - reg = mdio_clause45_read(efx, phy, MDIO_MMD_AN, MDIO_AN_10GBT_STATUS); + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_CTRL); + if (reg & (1 << MDIO_AN_10GBT_CTRL_ADV_10G_LBN)) + adv |= ADVERTISED_10000baseT_Full; + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_STATUS); if (reg & (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN)) lpa |= ADVERTISED_10000baseT_Full; - return lpa; -} -static void sfx7101_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) -{ - mdio_clause45_get_settings_ext(efx, ecmd, ADVERTISED_10000baseT_Full, - tenxpress_get_xnp_lpa(efx)); - ecmd->supported |= SUPPORTED_10000baseT_Full; - ecmd->advertising |= ADVERTISED_10000baseT_Full; + mdio_clause45_get_settings_ext(efx, ecmd, adv, lpa); + + if (efx->phy_type != PHY_TYPE_SFX7101) + ecmd->supported |= (SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full); + + /* In loopback, the PHY automatically brings up the correct interface, + * but doesn't advertise the correct speed. So override it */ + if (efx->loopback_mode == LOOPBACK_GPHY) + ecmd->speed = SPEED_1000; + else if (LOOPBACK_MASK(efx) & efx->phy_op->loopbacks) + ecmd->speed = SPEED_10000; } -static void sft9001_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) +static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) { - int phy_id = efx->mii.phy_id; - u32 xnp_adv = 0; - int reg; - - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, - PMA_PMD_SPEED_ENABLE_REG); - if (EFX_WORKAROUND_13204(efx) && (reg & (1 << PMA_PMD_100TX_ADV_LBN))) - xnp_adv |= ADVERTISED_100baseT_Full; - if (reg & (1 << PMA_PMD_1000T_ADV_LBN)) - xnp_adv |= ADVERTISED_1000baseT_Full; - if (reg & (1 << PMA_PMD_10000T_ADV_LBN)) - xnp_adv |= ADVERTISED_10000baseT_Full; - - mdio_clause45_get_settings_ext(efx, ecmd, xnp_adv, - tenxpress_get_xnp_lpa(efx)); - - ecmd->supported |= (SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full); + if (!ecmd->autoneg) + return -EINVAL; - /* Use the vendor defined C22ext register for duplex settings */ - if (ecmd->speed != SPEED_10000 && !ecmd->autoneg) { - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT, - GPHY_XCONTROL_REG); - ecmd->duplex = (reg & (1 << GPHY_DUPLEX_LBN) ? - DUPLEX_FULL : DUPLEX_HALF); - } + return mdio_clause45_set_settings(efx, ecmd); } -static int sft9001_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) +static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising) { - int phy_id = efx->mii.phy_id; - int rc; - - rc = mdio_clause45_set_settings(efx, ecmd); - if (rc) - return rc; - - if (ecmd->speed != SPEED_10000 && !ecmd->autoneg) - mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT, - GPHY_XCONTROL_REG, GPHY_DUPLEX_LBN, - ecmd->duplex == DUPLEX_FULL); - - return rc; + mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_CTRL, + MDIO_AN_10GBT_CTRL_ADV_10G_LBN, + advertising & ADVERTISED_10000baseT_Full); } -static bool sft9001_set_xnp_advertise(struct efx_nic *efx, u32 advertising) +static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising) { - int phy = efx->mii.phy_id; - int reg = mdio_clause45_read(efx, phy, MDIO_MMD_PMAPMD, - PMA_PMD_SPEED_ENABLE_REG); - bool enabled; - - reg &= ~((1 << 2) | (1 << 3)); - if (EFX_WORKAROUND_13204(efx) && - (advertising & ADVERTISED_100baseT_Full)) - reg |= 1 << PMA_PMD_100TX_ADV_LBN; - if (advertising & ADVERTISED_1000baseT_Full) - reg |= 1 << PMA_PMD_1000T_ADV_LBN; - if (advertising & ADVERTISED_10000baseT_Full) - reg |= 1 << PMA_PMD_10000T_ADV_LBN; - mdio_clause45_write(efx, phy, MDIO_MMD_PMAPMD, - PMA_PMD_SPEED_ENABLE_REG, reg); - - enabled = (advertising & - (ADVERTISED_1000baseT_Half | - ADVERTISED_1000baseT_Full | - ADVERTISED_10000baseT_Full)); - if (EFX_WORKAROUND_13204(efx)) - enabled |= (advertising & ADVERTISED_100baseT_Full); - return enabled; + int phy_id = efx->mii.phy_id; + + mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT, + C22EXT_MSTSLV_CTRL, + C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN, + advertising & ADVERTISED_1000baseT_Full); + mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_CTRL, + MDIO_AN_10GBT_CTRL_ADV_10G_LBN, + advertising & ADVERTISED_10000baseT_Full); } struct efx_phy_operations falcon_sfx7101_phy_ops = { @@ -882,8 +822,9 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = { .poll = tenxpress_phy_poll, .fini = tenxpress_phy_fini, .clear_interrupt = efx_port_dummy_op_void, - .get_settings = sfx7101_get_settings, - .set_settings = mdio_clause45_set_settings, + .get_settings = tenxpress_get_settings, + .set_settings = tenxpress_set_settings, + .set_npage_adv = sfx7101_set_npage_adv, .num_tests = ARRAY_SIZE(sfx7101_test_names), .test_names = sfx7101_test_names, .run_tests = sfx7101_run_tests, @@ -898,9 +839,9 @@ struct efx_phy_operations falcon_sft9001_phy_ops = { .poll = tenxpress_phy_poll, .fini = tenxpress_phy_fini, .clear_interrupt = efx_port_dummy_op_void, - .get_settings = sft9001_get_settings, - .set_settings = sft9001_set_settings, - .set_xnp_advertise = sft9001_set_xnp_advertise, + .get_settings = tenxpress_get_settings, + .set_settings = tenxpress_set_settings, + .set_npage_adv = sft9001_set_npage_adv, .num_tests = ARRAY_SIZE(sft9001_test_names), .test_names = sft9001_test_names, .run_tests = sft9001_run_tests, diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h index 82e03e1d7371..78de68f4a95b 100644 --- a/drivers/net/sfc/workarounds.h +++ b/drivers/net/sfc/workarounds.h @@ -18,8 +18,8 @@ #define EFX_WORKAROUND_ALWAYS(efx) 1 #define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1) #define EFX_WORKAROUND_10G(efx) EFX_IS10G(efx) -#define EFX_WORKAROUND_SFX7101(efx) ((efx)->phy_type == PHY_TYPE_SFX7101) -#define EFX_WORKAROUND_SFT9001A(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A) +#define EFX_WORKAROUND_SFT9001(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A || \ + (efx)->phy_type == PHY_TYPE_SFT9001B) /* XAUI resets if link not detected */ #define EFX_WORKAROUND_5147 EFX_WORKAROUND_ALWAYS @@ -29,8 +29,6 @@ #define EFX_WORKAROUND_7884 EFX_WORKAROUND_10G /* TX pkt parser problem with <= 16 byte TXes */ #define EFX_WORKAROUND_9141 EFX_WORKAROUND_ALWAYS -/* Low rate CRC errors require XAUI reset */ -#define EFX_WORKAROUND_10750 EFX_WORKAROUND_SFX7101 /* TX_EV_PKT_ERR can be caused by a dangling TX descriptor * or a PCIe error (bug 11028) */ #define EFX_WORKAROUND_10727 EFX_WORKAROUND_ALWAYS @@ -55,8 +53,8 @@ #define EFX_WORKAROUND_8071 EFX_WORKAROUND_FALCON_A /* Need to send XNP pages for 100BaseT */ -#define EFX_WORKAROUND_13204 EFX_WORKAROUND_SFT9001A -/* Need to keep AN enabled */ -#define EFX_WORKAROUND_13963 EFX_WORKAROUND_SFT9001A +#define EFX_WORKAROUND_13204 EFX_WORKAROUND_SFT9001 +/* Don't restart AN in near-side loopback */ +#define EFX_WORKAROUND_15195 EFX_WORKAROUND_SFT9001 #endif /* EFX_WORKAROUNDS_H */ diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c index 607efeaf0bc5..9a00e5566af7 100644 --- a/drivers/net/skfp/skfddi.c +++ b/drivers/net/skfp/skfddi.c @@ -1003,9 +1003,9 @@ static int skfp_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) break; case SKFP_CLR_STATS: /* Zero out the driver statistics */ if (!capable(CAP_NET_ADMIN)) { - memset(&lp->MacStat, 0, sizeof(lp->MacStat)); - } else { status = -EPERM; + } else { + memset(&lp->MacStat, 0, sizeof(lp->MacStat)); } break; default: diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 3668e81e474d..994703cc0db3 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1403,9 +1403,6 @@ static int sky2_up(struct net_device *dev) } - if (netif_msg_ifup(sky2)) - printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); - netif_carrier_off(dev); /* must be power of 2 */ @@ -1484,6 +1481,9 @@ static int sky2_up(struct net_device *dev) sky2_write32(hw, B0_IMSK, imask); sky2_set_multicast(dev); + + if (netif_msg_ifup(sky2)) + printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); return 0; err_out: diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index bf3aa2a1effe..223cde0d43be 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -220,9 +220,9 @@ static void smc911x_reset(struct net_device *dev) /* make sure EEPROM has finished loading before setting GPIO_CFG */ timeout=1000; - while ( timeout-- && (SMC_GET_E2P_CMD(lp) & E2P_CMD_EPC_BUSY_)) { + while (--timeout && (SMC_GET_E2P_CMD(lp) & E2P_CMD_EPC_BUSY_)) udelay(10); - } + if (timeout == 0){ PRINTK("%s: smc911x_reset timeout waiting for EEPROM busy\n", dev->name); return; diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index f513bdf1c887..783c1a7b869e 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -953,7 +953,7 @@ smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktbytes) do { udelay(1); val = smsc911x_reg_read(pdata, RX_DP_CTRL); - } while (timeout-- && (val & RX_DP_CTRL_RX_FFWD_)); + } while (--timeout && (val & RX_DP_CTRL_RX_FFWD_)); if (unlikely(timeout == 0)) SMSC_WARNING(HW, "Timed out waiting for " diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index c14a4c6452c7..a1e4b3895b33 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -498,7 +498,7 @@ static void smsc9420_check_mac_address(struct net_device *dev) static void smsc9420_stop_tx(struct smsc9420_pdata *pd) { u32 dmac_control, mac_cr, dma_intr_ena; - int timeOut = 1000; + int timeout = 1000; /* disable TX DMAC */ dmac_control = smsc9420_reg_read(pd, DMAC_CONTROL); @@ -506,13 +506,13 @@ static void smsc9420_stop_tx(struct smsc9420_pdata *pd) smsc9420_reg_write(pd, DMAC_CONTROL, dmac_control); /* Wait max 10ms for transmit process to stop */ - while (timeOut--) { + while (--timeout) { if (smsc9420_reg_read(pd, DMAC_STATUS) & DMAC_STS_TS_) break; udelay(10); } - if (!timeOut) + if (!timeout) smsc_warn(IFDOWN, "TX DMAC failed to stop"); /* ACK Tx DMAC stop bit */ @@ -596,7 +596,7 @@ static void smsc9420_free_rx_ring(struct smsc9420_pdata *pd) static void smsc9420_stop_rx(struct smsc9420_pdata *pd) { - int timeOut = 1000; + int timeout = 1000; u32 mac_cr, dmac_control, dma_intr_ena; /* mask RX DMAC interrupts */ @@ -617,13 +617,13 @@ static void smsc9420_stop_rx(struct smsc9420_pdata *pd) smsc9420_pci_flush_write(pd); /* wait up to 10ms for receive to stop */ - while (timeOut--) { + while (--timeout) { if (smsc9420_reg_read(pd, DMAC_STATUS) & DMAC_STS_RS_) break; udelay(10); } - if (!timeOut) + if (!timeout) smsc_warn(IFDOWN, "RX DMAC did not stop! timeout."); /* ACK the Rx DMAC stop bit */ @@ -1378,6 +1378,7 @@ static int smsc9420_open(struct net_device *dev) /* test the IRQ connection to the ISR */ smsc_dbg(IFUP, "Testing ISR using IRQ %d", dev->irq); + pd->software_irq_signal = false; spin_lock_irqsave(&pd->int_lock, flags); /* configure interrupt deassertion timer and enable interrupts */ @@ -1393,8 +1394,6 @@ static int smsc9420_open(struct net_device *dev) smsc9420_pci_flush_write(pd); timeout = 1000; - pd->software_irq_signal = false; - smp_wmb(); while (timeout--) { if (pd->software_irq_signal) break; diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 86c765d83de1..491876341068 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -148,7 +148,7 @@ static u16 __phy_read(struct gem *gp, int phy_addr, int reg) cmd |= (MIF_FRAME_TAMSB); writel(cmd, gp->regs + MIF_FRAME); - while (limit--) { + while (--limit) { cmd = readl(gp->regs + MIF_FRAME); if (cmd & MIF_FRAME_TALSB) break; @@ -2221,6 +2221,8 @@ static int gem_do_start(struct net_device *dev) gp->running = 1; + napi_enable(&gp->napi); + if (gp->lstate == link_up) { netif_carrier_on(gp->dev); gem_set_link_modes(gp); @@ -2238,6 +2240,8 @@ static int gem_do_start(struct net_device *dev) spin_lock_irqsave(&gp->lock, flags); spin_lock(&gp->tx_lock); + napi_disable(&gp->napi); + gp->running = 0; gem_reset(gp); gem_clean_rings(gp); @@ -2338,8 +2342,6 @@ static int gem_open(struct net_device *dev) if (!gp->asleep) rc = gem_do_start(dev); gp->opened = (rc == 0); - if (gp->opened) - napi_enable(&gp->napi); mutex_unlock(&gp->pm_mutex); @@ -2476,8 +2478,6 @@ static int gem_resume(struct pci_dev *pdev) /* Re-attach net device */ netif_device_attach(dev); - - napi_enable(&gp->napi); } spin_lock_irqsave(&gp->lock, flags); diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c index 61843fd57525..78f8cee5fd74 100644 --- a/drivers/net/sungem_phy.c +++ b/drivers/net/sungem_phy.c @@ -79,7 +79,7 @@ static int reset_one_mii_phy(struct mii_phy* phy, int phy_id) udelay(100); - while (limit--) { + while (--limit) { val = __phy_read(phy, phy_id, MII_BMCR); if ((val & BMCR_RESET) == 0) break; diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c index 7a72a3112f0a..cc4013be5e18 100644 --- a/drivers/net/sunhme.c +++ b/drivers/net/sunhme.c @@ -2629,6 +2629,14 @@ static int __devinit happy_meal_sbus_probe_one(struct of_device *op, int is_qfe) int i, qfe_slot = -1; int err = -ENODEV; + sbus_dp = to_of_device(op->dev.parent)->node; + if (is_qfe) + sbus_dp = to_of_device(op->dev.parent->parent)->node; + + /* We can match PCI devices too, do not accept those here. */ + if (strcmp(sbus_dp->name, "sbus")) + return err; + if (is_qfe) { qp = quattro_sbus_find(op); if (qp == NULL) @@ -2734,10 +2742,6 @@ static int __devinit happy_meal_sbus_probe_one(struct of_device *op, int is_qfe) if (qp != NULL) hp->happy_flags |= HFLAG_QUATTRO; - sbus_dp = to_of_device(op->dev.parent)->node; - if (is_qfe) - sbus_dp = to_of_device(op->dev.parent->parent)->node; - /* Get the supported DVMA burst sizes from our Happy SBUS. */ hp->happy_bursts = of_getintprop_default(sbus_dp, "burst-sizes", 0x00); diff --git a/drivers/net/sunqe.c b/drivers/net/sunqe.c index 6e8f377355fe..fe0c3f244562 100644 --- a/drivers/net/sunqe.c +++ b/drivers/net/sunqe.c @@ -227,7 +227,7 @@ static int qe_init(struct sunqe *qep, int from_irq) if (!(sbus_readb(mregs + MREGS_PHYCONFIG) & MREGS_PHYCONFIG_LTESTDIS)) { int tries = 50; - while (tries--) { + while (--tries) { u8 tmp; mdelay(5); diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c index 75461dbd4876..a9fd2b2ccaf6 100644 --- a/drivers/net/tsi108_eth.c +++ b/drivers/net/tsi108_eth.c @@ -1237,7 +1237,7 @@ static void tsi108_init_phy(struct net_device *dev) spin_lock_irqsave(&phy_lock, flags); tsi108_write_mii(data, MII_BMCR, BMCR_RESET); - while (i--){ + while (--i) { if(!(tsi108_read_mii(data, MII_BMCR) & BMCR_RESET)) break; udelay(10); diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c index 1210fb3748a7..db7d5e11855d 100644 --- a/drivers/net/tulip/21142.c +++ b/drivers/net/tulip/21142.c @@ -9,6 +9,11 @@ Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} for more information on this driver. + + DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller + Hardware Reference Manual" is currently available at : + http://developer.intel.com/design/network/manuals/278074.htm + Please submit bugs to http://bugzilla.kernel.org/ . */ @@ -32,7 +37,11 @@ void t21142_media_task(struct work_struct *work) int csr12 = ioread32(ioaddr + CSR12); int next_tick = 60*HZ; int new_csr6 = 0; + int csr14 = ioread32(ioaddr + CSR14); + /* CSR12[LS10,LS100] are not reliable during autonegotiation */ + if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000) + csr12 |= 6; if (tulip_debug > 2) printk(KERN_INFO"%s: 21143 negotiation status %8.8x, %s.\n", dev->name, csr12, medianame[dev->if_port]); @@ -76,7 +85,7 @@ void t21142_media_task(struct work_struct *work) new_csr6 = 0x83860000; dev->if_port = 3; iowrite32(0, ioaddr + CSR13); - iowrite32(0x0003FF7F, ioaddr + CSR14); + iowrite32(0x0003FFFF, ioaddr + CSR14); iowrite16(8, ioaddr + CSR15); iowrite32(1, ioaddr + CSR13); } @@ -132,10 +141,14 @@ void t21142_lnk_change(struct net_device *dev, int csr5) struct tulip_private *tp = netdev_priv(dev); void __iomem *ioaddr = tp->base_addr; int csr12 = ioread32(ioaddr + CSR12); + int csr14 = ioread32(ioaddr + CSR14); + /* CSR12[LS10,LS100] are not reliable during autonegotiation */ + if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000) + csr12 |= 6; if (tulip_debug > 1) printk(KERN_INFO"%s: 21143 link status interrupt %8.8x, CSR5 %x, " - "%8.8x.\n", dev->name, csr12, csr5, ioread32(ioaddr + CSR14)); + "%8.8x.\n", dev->name, csr12, csr5, csr14); /* If NWay finished and we have a negotiated partner capability. */ if (tp->nway && !tp->nwayset && (csr12 & 0x7000) == 0x5000) { @@ -143,7 +156,9 @@ void t21142_lnk_change(struct net_device *dev, int csr5) int negotiated = tp->sym_advertise & (csr12 >> 16); tp->lpar = csr12 >> 16; tp->nwayset = 1; - if (negotiated & 0x0100) dev->if_port = 5; + /* If partner cannot negotiate, it is 10Mbps Half Duplex */ + if (!(csr12 & 0x8000)) dev->if_port = 0; + else if (negotiated & 0x0100) dev->if_port = 5; else if (negotiated & 0x0080) dev->if_port = 3; else if (negotiated & 0x0040) dev->if_port = 4; else if (negotiated & 0x0020) dev->if_port = 0; @@ -214,7 +229,7 @@ void t21142_lnk_change(struct net_device *dev, int csr5) tp->timer.expires = RUN_AT(3*HZ); add_timer(&tp->timer); } else if (dev->if_port == 5) - iowrite32(ioread32(ioaddr + CSR14) & ~0x080, ioaddr + CSR14); + iowrite32(csr14 & ~0x080, ioaddr + CSR14); } else if (dev->if_port == 0 || dev->if_port == 4) { if ((csr12 & 4) == 0) printk(KERN_INFO"%s: 21143 10baseT link beat good.\n", diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index d5d53b633cf8..d4c5ecc51f77 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -392,7 +392,7 @@ static void de_rx (struct de_private *de) unsigned drop = 0; int rc; - while (rx_work--) { + while (--rx_work) { u32 status, len; dma_addr_t mapping; struct sk_buff *skb, *copy_skb; @@ -464,13 +464,14 @@ static void de_rx (struct de_private *de) drop = 1; rx_next: - de->rx_ring[rx_tail].opts1 = cpu_to_le32(DescOwn); if (rx_tail == (DE_RX_RING_SIZE - 1)) de->rx_ring[rx_tail].opts2 = cpu_to_le32(RingEnd | de->rx_buf_sz); else de->rx_ring[rx_tail].opts2 = cpu_to_le32(de->rx_buf_sz); de->rx_ring[rx_tail].addr1 = cpu_to_le32(mapping); + wmb(); + de->rx_ring[rx_tail].opts1 = cpu_to_le32(DescOwn); rx_tail = NEXT_RX(rx_tail); } diff --git a/drivers/net/tun.c b/drivers/net/tun.c index d7b81e4fdd56..09fea31d3e36 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -157,10 +157,16 @@ static int update_filter(struct tap_filter *filter, void __user *arg) nexact = n; - /* The rest is hashed */ + /* Remaining multicast addresses are hashed, + * unicast will leave the filter disabled. */ memset(filter->mask, 0, sizeof(filter->mask)); - for (; n < uf.count; n++) + for (; n < uf.count; n++) { + if (!is_multicast_ether_addr(addr[n].u)) { + err = 0; /* no filter */ + goto done; + } addr_hash_set(filter->mask, addr[n].u); + } /* For ALLMULTI just set the mask to all ones. * This overrides the mask populated above. */ diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 11441225bf41..e87986867ba5 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -1536,6 +1536,11 @@ static void adjust_link(struct net_device *dev) static int init_phy(struct net_device *dev) { struct ucc_geth_private *priv = netdev_priv(dev); + struct device_node *np = priv->node; + struct device_node *phy, *mdio; + const phandle *ph; + char bus_name[MII_BUS_ID_SIZE]; + const unsigned int *id; struct phy_device *phydev; char phy_id[BUS_ID_SIZE]; @@ -1543,8 +1548,18 @@ static int init_phy(struct net_device *dev) priv->oldspeed = 0; priv->oldduplex = -1; - snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, priv->ug_info->mdio_bus, - priv->ug_info->phy_address); + ph = of_get_property(np, "phy-handle", NULL); + phy = of_find_node_by_phandle(*ph); + mdio = of_get_parent(phy); + + id = of_get_property(phy, "reg", NULL); + + of_node_put(phy); + of_node_put(mdio); + + uec_mdio_bus_name(bus_name, mdio); + snprintf(phy_id, sizeof(phy_id), "%s:%02x", + bus_name, *id); phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface); @@ -3748,6 +3763,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma ugeth->ug_info = ug_info; ugeth->dev = dev; + ugeth->node = np; return 0; } diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h index 8f699cb773ee..16cbe42ba43c 100644 --- a/drivers/net/ucc_geth.h +++ b/drivers/net/ucc_geth.h @@ -1186,6 +1186,8 @@ struct ucc_geth_private { int oldspeed; int oldduplex; int oldlink; + + struct device_node *node; }; void uec_set_ethtool_ops(struct net_device *netdev); diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c index c001d261366b..54635911305c 100644 --- a/drivers/net/ucc_geth_mii.c +++ b/drivers/net/ucc_geth_mii.c @@ -156,7 +156,7 @@ static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *ma if (err) goto reg_map_fail; - snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", res.start); + uec_mdio_bus_name(new_bus->id, np); new_bus->irq = kmalloc(32 * sizeof(int), GFP_KERNEL); @@ -283,3 +283,13 @@ void uec_mdio_exit(void) { of_unregister_platform_driver(&uec_mdio_driver); } + +void uec_mdio_bus_name(char *name, struct device_node *np) +{ + const u32 *reg; + + reg = of_get_property(np, "reg", NULL); + + snprintf(name, MII_BUS_ID_SIZE, "%s@%x", np->name, reg ? *reg : 0); +} + diff --git a/drivers/net/ucc_geth_mii.h b/drivers/net/ucc_geth_mii.h index 1e45b2028a50..840cf80235b7 100644 --- a/drivers/net/ucc_geth_mii.h +++ b/drivers/net/ucc_geth_mii.h @@ -97,4 +97,5 @@ int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum); int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value); int __init uec_mdio_init(void); void uec_mdio_exit(void); +void uec_mdio_bus_name(char *name, struct device_node *np); #endif /* __UEC_MII_H */ diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 0d0fa91c0251..fe98acaead97 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -455,6 +455,7 @@ static const struct usb_device_id hso_ids[] = { {icon321_port_device(0x0af0, 0xd033)}, /* Icon-322 */ {USB_DEVICE(0x0af0, 0x7301)}, /* GE40x */ {USB_DEVICE(0x0af0, 0x7361)}, /* GE40x */ + {USB_DEVICE(0x0af0, 0x7381)}, /* GE40x */ {USB_DEVICE(0x0af0, 0x7401)}, /* GI 0401 */ {USB_DEVICE(0x0af0, 0x7501)}, /* GTM 382 */ {USB_DEVICE(0x0af0, 0x7601)}, /* GE40x */ @@ -462,7 +463,8 @@ static const struct usb_device_id hso_ids[] = { {USB_DEVICE(0x0af0, 0x7801)}, {USB_DEVICE(0x0af0, 0x7901)}, {USB_DEVICE(0x0af0, 0x7361)}, - {icon321_port_device(0x0af0, 0xd051)}, + {USB_DEVICE(0x0af0, 0xd057)}, + {USB_DEVICE(0x0af0, 0xd055)}, {} }; MODULE_DEVICE_TABLE(usb, hso_ids); diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 63ef2a8905fb..c68808336c8c 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -287,7 +287,7 @@ static void try_fill_recv_maxbufs(struct virtnet_info *vi) skb_put(skb, MAX_PACKET_LEN); hdr = skb_vnet_hdr(skb); - sg_init_one(sg, hdr, sizeof(*hdr)); + sg_set_buf(sg, hdr, sizeof(*hdr)); if (vi->big_packets) { for (i = 0; i < MAX_SKB_FRAGS; i++) { @@ -488,9 +488,9 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb) /* Encode metadata header at front. */ if (vi->mergeable_rx_bufs) - sg_init_one(sg, mhdr, sizeof(*mhdr)); + sg_set_buf(sg, mhdr, sizeof(*mhdr)); else - sg_init_one(sg, hdr, sizeof(*hdr)); + sg_set_buf(sg, hdr, sizeof(*hdr)); num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1; diff --git a/drivers/net/wimax/i2400m/debugfs.c b/drivers/net/wimax/i2400m/debugfs.c index 626632985977..9b81af3f80a9 100644 --- a/drivers/net/wimax/i2400m/debugfs.c +++ b/drivers/net/wimax/i2400m/debugfs.c @@ -234,20 +234,6 @@ struct dentry *debugfs_create_i2400m_reset( &fops_i2400m_reset); } -/* - * Debug levels control; see debug.h - */ -struct d_level D_LEVEL[] = { - D_SUBMODULE_DEFINE(control), - D_SUBMODULE_DEFINE(driver), - D_SUBMODULE_DEFINE(debugfs), - D_SUBMODULE_DEFINE(fw), - D_SUBMODULE_DEFINE(netdev), - D_SUBMODULE_DEFINE(rfkill), - D_SUBMODULE_DEFINE(rx), - D_SUBMODULE_DEFINE(tx), -}; -size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL); #define __debugfs_register(prefix, name, parent) \ do { \ diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c index 5f98047e18cf..e80a0b65a754 100644 --- a/drivers/net/wimax/i2400m/driver.c +++ b/drivers/net/wimax/i2400m/driver.c @@ -707,6 +707,22 @@ void i2400m_release(struct i2400m *i2400m) EXPORT_SYMBOL_GPL(i2400m_release); +/* + * Debug levels control; see debug.h + */ +struct d_level D_LEVEL[] = { + D_SUBMODULE_DEFINE(control), + D_SUBMODULE_DEFINE(driver), + D_SUBMODULE_DEFINE(debugfs), + D_SUBMODULE_DEFINE(fw), + D_SUBMODULE_DEFINE(netdev), + D_SUBMODULE_DEFINE(rfkill), + D_SUBMODULE_DEFINE(rx), + D_SUBMODULE_DEFINE(tx), +}; +size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL); + + static int __init i2400m_driver_init(void) { diff --git a/drivers/net/wireless/arlan-main.c b/drivers/net/wireless/arlan-main.c index bfca15da6f0f..14c11656e82c 100644 --- a/drivers/net/wireless/arlan-main.c +++ b/drivers/net/wireless/arlan-main.c @@ -1082,8 +1082,8 @@ static int __init arlan_probe_here(struct net_device *dev, if (arlan_check_fingerprint(memaddr)) return -ENODEV; - printk(KERN_NOTICE "%s: Arlan found at %x, \n ", dev->name, - (int) virt_to_phys((void*)memaddr)); + printk(KERN_NOTICE "%s: Arlan found at %llx, \n ", dev->name, + (u64) virt_to_phys((void*)memaddr)); ap->card = (void *) memaddr; dev->mem_start = memaddr; diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 8ef87356e083..a533ed60bb4d 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -1028,6 +1028,8 @@ ath5k_setup_bands(struct ieee80211_hw *hw) * it's done by reseting the chip. To accomplish this we must * first cleanup any pending DMA, then restart stuff after a la * ath5k_init. + * + * Called with sc->lock. */ static int ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) @@ -2814,11 +2816,17 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed) { struct ath5k_softc *sc = hw->priv; struct ieee80211_conf *conf = &hw->conf; + int ret; + + mutex_lock(&sc->lock); sc->bintval = conf->beacon_int; sc->power_level = conf->power_level; - return ath5k_chan_set(sc, conf->channel); + ret = ath5k_chan_set(sc, conf->channel); + + mutex_unlock(&sc->lock); + return ret; } static int diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 0dc8eed16404..c01ea48da5fe 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1719,6 +1719,10 @@ static int iwl_read_ucode(struct iwl_priv *priv) priv->ucode_data_backup.len = data_size; iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup); + if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr || + !priv->ucode_data_backup.v_addr) + goto err_pci_alloc; + /* Initialization instructions and data */ if (init_size && init_data_size) { priv->ucode_init.len = init_size; @@ -4038,6 +4042,7 @@ static int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state) priv->is_open = 1; } + pci_save_state(pdev); pci_set_power_state(pdev, PCI_D3hot); return 0; @@ -4048,6 +4053,7 @@ static int iwl_pci_resume(struct pci_dev *pdev) struct iwl_priv *priv = pci_get_drvdata(pdev); pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); if (priv->is_open) iwl_mac_start(priv->hw); diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 412f66bac1af..70a8b21ca39b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -480,6 +480,9 @@ void iwl_clear_stations_table(struct iwl_priv *priv) priv->num_stations = 0; memset(priv->stations, 0, sizeof(priv->stations)); + /* clean ucode key table bit map */ + priv->ucode_key_table = 0; + spin_unlock_irqrestore(&priv->sta_lock, flags); } EXPORT_SYMBOL(iwl_clear_stations_table); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 95d01984c80e..5b44d322b99f 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -8143,6 +8143,7 @@ static int iwl3945_pci_suspend(struct pci_dev *pdev, pm_message_t state) priv->is_open = 1; } + pci_save_state(pdev); pci_set_power_state(pdev, PCI_D3hot); return 0; @@ -8153,6 +8154,7 @@ static int iwl3945_pci_resume(struct pci_dev *pdev) struct iwl3945_priv *priv = pci_get_drvdata(pdev); pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); if (priv->is_open) iwl3945_mac_start(priv->hw); diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c index 4e75e8e7fa90..78df281b297a 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c +++ b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c @@ -285,7 +285,10 @@ static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel) ofdm_power = priv->channels[channel - 1].hw_value >> 4; cck_power = min(cck_power, (u8)11); - ofdm_power = min(ofdm_power, (u8)35); + if (ofdm_power > (u8)15) + ofdm_power = 25; + else + ofdm_power += 10; rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1); @@ -536,7 +539,10 @@ static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel) cck_power += priv->txpwr_base & 0xF; cck_power = min(cck_power, (u8)35); - ofdm_power = min(ofdm_power, (u8)15); + if (ofdm_power > (u8)15) + ofdm_power = 25; + else + ofdm_power += 10; ofdm_power += priv->txpwr_base >> 4; ofdm_power = min(ofdm_power, (u8)35); diff --git a/drivers/oprofile/buffer_sync.c b/drivers/oprofile/buffer_sync.c index 9da5a4b81133..c3ea5fa7d05a 100644 --- a/drivers/oprofile/buffer_sync.c +++ b/drivers/oprofile/buffer_sync.c @@ -38,7 +38,7 @@ static LIST_HEAD(dying_tasks); static LIST_HEAD(dead_tasks); -static cpumask_t marked_cpus = CPU_MASK_NONE; +static cpumask_var_t marked_cpus; static DEFINE_SPINLOCK(task_mortuary); static void process_task_mortuary(void); @@ -456,10 +456,10 @@ static void mark_done(int cpu) { int i; - cpu_set(cpu, marked_cpus); + cpumask_set_cpu(cpu, marked_cpus); for_each_online_cpu(i) { - if (!cpu_isset(i, marked_cpus)) + if (!cpumask_test_cpu(i, marked_cpus)) return; } @@ -468,7 +468,7 @@ static void mark_done(int cpu) */ process_task_mortuary(); - cpus_clear(marked_cpus); + cpumask_clear(marked_cpus); } @@ -565,6 +565,20 @@ void sync_buffer(int cpu) mutex_unlock(&buffer_mutex); } +int __init buffer_sync_init(void) +{ + if (!alloc_cpumask_var(&marked_cpus, GFP_KERNEL)) + return -ENOMEM; + + cpumask_clear(marked_cpus); + return 0; +} + +void __exit buffer_sync_cleanup(void) +{ + free_cpumask_var(marked_cpus); +} + /* The function can be used to add a buffer worth of data directly to * the kernel buffer. The buffer is assumed to be a circular buffer. * Take the entries from index start and end at index end, wrapping diff --git a/drivers/oprofile/buffer_sync.h b/drivers/oprofile/buffer_sync.h index 3110732c1835..0ebf5db62679 100644 --- a/drivers/oprofile/buffer_sync.h +++ b/drivers/oprofile/buffer_sync.h @@ -19,4 +19,8 @@ void sync_stop(void); /* sync the given CPU's buffer */ void sync_buffer(int cpu); +/* initialize/destroy the buffer system. */ +int buffer_sync_init(void); +void buffer_sync_cleanup(void); + #endif /* OPROFILE_BUFFER_SYNC_H */ diff --git a/drivers/oprofile/oprof.c b/drivers/oprofile/oprof.c index 3cffce90f82a..ced39f602292 100644 --- a/drivers/oprofile/oprof.c +++ b/drivers/oprofile/oprof.c @@ -183,6 +183,10 @@ static int __init oprofile_init(void) { int err; + err = buffer_sync_init(); + if (err) + return err; + err = oprofile_arch_init(&oprofile_ops); if (err < 0 || timer) { @@ -191,8 +195,10 @@ static int __init oprofile_init(void) } err = oprofilefs_register(); - if (err) + if (err) { oprofile_arch_exit(); + buffer_sync_cleanup(); + } return err; } @@ -202,6 +208,7 @@ static void __exit oprofile_exit(void) { oprofilefs_unregister(); oprofile_arch_exit(); + buffer_sync_cleanup(); } diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index 3fac8f81d59d..a70cf16ee1ad 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -668,7 +668,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) * @dev: instance of PCI owned by the driver that's asking * @mask: number of address bits this PCI device can handle * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static int sba_dma_supported( struct device *dev, u64 mask) { @@ -680,8 +680,8 @@ static int sba_dma_supported( struct device *dev, u64 mask) return(0); } - /* Documentation/DMA-mapping.txt tells drivers to try 64-bit first, - * then fall back to 32-bit if that fails. + /* Documentation/PCI/PCI-DMA-mapping.txt tells drivers to try 64-bit + * first, then fall back to 32-bit if that fails. * We are just "encouraging" 32-bit DMA masks here since we can * never allow IOMMU bypass unless we add special support for ZX1. */ @@ -706,7 +706,7 @@ static int sba_dma_supported( struct device *dev, u64 mask) * @size: number of bytes to map in driver buffer. * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static dma_addr_t sba_map_single(struct device *dev, void *addr, size_t size, @@ -785,7 +785,7 @@ sba_map_single(struct device *dev, void *addr, size_t size, * @size: number of bytes mapped in driver buffer. * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, @@ -861,7 +861,7 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, * @size: number of bytes mapped in driver buffer. * @dma_handle: IOVA of new buffer. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void *sba_alloc_consistent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) @@ -892,7 +892,7 @@ static void *sba_alloc_consistent(struct device *hwdev, size_t size, * @vaddr: virtual address IOVA of "consistent" buffer. * @dma_handler: IO virtual address of "consistent" buffer. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void sba_free_consistent(struct device *hwdev, size_t size, void *vaddr, @@ -927,7 +927,7 @@ int dump_run_sg = 0; * @nents: number of entries in list * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static int sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, @@ -1011,7 +1011,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, * @nents: number of entries in list * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c index 101ed49a2d15..032db815b0f9 100644 --- a/drivers/parport/parport_serial.c +++ b/drivers/parport/parport_serial.c @@ -64,6 +64,11 @@ struct parport_pc_pci { static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *card, int autoirq, int autodma) { + /* the rule described below doesn't hold for this device */ + if (dev->device == PCI_DEVICE_ID_NETMOS_9835 && + dev->subsystem_vendor == PCI_VENDOR_ID_IBM && + dev->subsystem_device == 0x0299) + return -ENODEV; /* * Netmos uses the subdevice ID to indicate the number of parallel * and serial ports. The form is 0x00PS, where <P> is the number of diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index f5a662a50acb..519f5f91e765 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -42,6 +42,7 @@ LIST_HEAD(dmar_drhd_units); static struct acpi_table_header * __initdata dmar_tbl; +static acpi_size dmar_tbl_size; static void __init dmar_register_drhd_unit(struct dmar_drhd_unit *drhd) { @@ -288,8 +289,9 @@ static int __init dmar_table_detect(void) acpi_status status = AE_OK; /* if we could find DMAR table, then there are DMAR devices */ - status = acpi_get_table(ACPI_SIG_DMAR, 0, - (struct acpi_table_header **)&dmar_tbl); + status = acpi_get_table_with_size(ACPI_SIG_DMAR, 0, + (struct acpi_table_header **)&dmar_tbl, + &dmar_tbl_size); if (ACPI_SUCCESS(status) && !dmar_tbl) { printk (KERN_WARNING PREFIX "Unable to map DMAR\n"); @@ -481,6 +483,7 @@ void __init detect_intel_iommu(void) iommu_detected = 1; #endif } + early_acpi_os_unmap_memory(dmar_tbl, dmar_tbl_size); dmar_tbl = NULL; } diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile index e31fb91652ce..2aa117c8cd87 100644 --- a/drivers/pci/hotplug/Makefile +++ b/drivers/pci/hotplug/Makefile @@ -5,11 +5,15 @@ obj-$(CONFIG_HOTPLUG_PCI) += pci_hotplug.o obj-$(CONFIG_HOTPLUG_PCI_COMPAQ) += cpqphp.o obj-$(CONFIG_HOTPLUG_PCI_IBM) += ibmphp.o + +# pciehp should be linked before acpiphp in order to allow the native driver +# to attempt to bind first. We can then fall back to generic support. + +obj-$(CONFIG_HOTPLUG_PCI_PCIE) += pciehp.o obj-$(CONFIG_HOTPLUG_PCI_ACPI) += acpiphp.o obj-$(CONFIG_HOTPLUG_PCI_ACPI_IBM) += acpiphp_ibm.o obj-$(CONFIG_HOTPLUG_PCI_CPCI_ZT5550) += cpcihp_zt5550.o obj-$(CONFIG_HOTPLUG_PCI_CPCI_GENERIC) += cpcihp_generic.o -obj-$(CONFIG_HOTPLUG_PCI_PCIE) += pciehp.o obj-$(CONFIG_HOTPLUG_PCI_SHPC) += shpchp.o obj-$(CONFIG_HOTPLUG_PCI_RPA) += rpaphp.o obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR) += rpadlpar_io.o diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c index b0e7de9e536d..d8649e127298 100644 --- a/drivers/pci/hotplug/fakephp.c +++ b/drivers/pci/hotplug/fakephp.c @@ -195,13 +195,13 @@ static void remove_slot_worker(struct work_struct *work) * Tries hard not to re-enable already existing devices; * also handles scanning of subfunctions. */ -static void pci_rescan_slot(struct pci_dev *temp) +static int pci_rescan_slot(struct pci_dev *temp) { struct pci_bus *bus = temp->bus; struct pci_dev *dev; int func; - int retval; u8 hdr_type; + int count = 0; if (!pci_read_config_byte(temp, PCI_HEADER_TYPE, &hdr_type)) { temp->hdr_type = hdr_type & 0x7f; @@ -213,17 +213,12 @@ static void pci_rescan_slot(struct pci_dev *temp) dbg("New device on %s function %x:%x\n", bus->name, temp->devfn >> 3, temp->devfn & 7); - retval = pci_bus_add_device(dev); - if (retval) - dev_err(&dev->dev, "error adding " - "device, continuing.\n"); - else - add_slot(dev); + count++; } } /* multifunction device? */ if (!(hdr_type & 0x80)) - return; + return count; /* continue scanning for other functions */ for (func = 1, temp->devfn++; func < 8; func++, temp->devfn++) { @@ -239,16 +234,13 @@ static void pci_rescan_slot(struct pci_dev *temp) dbg("New device on %s function %x:%x\n", bus->name, temp->devfn >> 3, temp->devfn & 7); - retval = pci_bus_add_device(dev); - if (retval) - dev_err(&dev->dev, "error adding " - "device, continuing.\n"); - else - add_slot(dev); + count++; } } } } + + return count; } @@ -262,6 +254,8 @@ static void pci_rescan_bus(const struct pci_bus *bus) { unsigned int devfn; struct pci_dev *dev; + int retval; + int found = 0; dev = alloc_pci_dev(); if (!dev) return; @@ -270,7 +264,23 @@ static void pci_rescan_bus(const struct pci_bus *bus) dev->sysdata = bus->sysdata; for (devfn = 0; devfn < 0x100; devfn += 8) { dev->devfn = devfn; - pci_rescan_slot(dev); + found += pci_rescan_slot(dev); + } + + if (found) { + pci_bus_assign_resources(bus); + list_for_each_entry(dev, &bus->devices, bus_list) { + /* Skip already-added devices */ + if (dev->is_added) + continue; + retval = pci_bus_add_device(dev); + if (retval) + dev_err(&dev->dev, + "Error adding device, continuing\n"); + else + add_slot(dev); + } + pci_bus_add_devices(bus); } kfree(dev); } diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 3dfecb20d5e7..f4b7c79023ff 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -268,7 +268,12 @@ static long list_size; static void domain_remove_dev_info(struct dmar_domain *domain); -int dmar_disabled; +#ifdef CONFIG_DMAR_DEFAULT_ON +int dmar_disabled = 0; +#else +int dmar_disabled = 1; +#endif /*CONFIG_DMAR_DEFAULT_ON*/ + static int __initdata dmar_map_gfx = 1; static int dmar_forcedac; static int intel_iommu_strict; @@ -284,9 +289,12 @@ static int __init intel_iommu_setup(char *str) if (!str) return -EINVAL; while (*str) { - if (!strncmp(str, "off", 3)) { + if (!strncmp(str, "on", 2)) { + dmar_disabled = 0; + printk(KERN_INFO "Intel-IOMMU: enabled\n"); + } else if (!strncmp(str, "off", 3)) { dmar_disabled = 1; - printk(KERN_INFO"Intel-IOMMU: disabled\n"); + printk(KERN_INFO "Intel-IOMMU: disabled\n"); } else if (!strncmp(str, "igfx_off", 8)) { dmar_map_gfx = 0; printk(KERN_INFO diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c index f78371b22529..5a57753ea9fc 100644 --- a/drivers/pci/intr_remapping.c +++ b/drivers/pci/intr_remapping.c @@ -6,6 +6,7 @@ #include <linux/irq.h> #include <asm/io_apic.h> #include <asm/smp.h> +#include <asm/cpu.h> #include <linux/intel-iommu.h> #include "intr_remapping.h" diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 896a15d70f5b..44f15ff70c1d 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -103,6 +103,16 @@ static void msix_set_enable(struct pci_dev *dev, int enable) } } +/* + * Essentially, this is ((1 << (1 << x)) - 1), but without the + * undefinedness of a << 32. + */ +static inline __attribute_const__ u32 msi_mask(unsigned x) +{ + static const u32 mask[] = { 1, 2, 4, 0xf, 0xff, 0xffff, 0xffffffff }; + return mask[x]; +} + static void msix_flush_writes(struct irq_desc *desc) { struct msi_desc *entry; @@ -407,8 +417,7 @@ static int msi_capability_init(struct pci_dev *dev) /* All MSIs are unmasked by default, Mask them all */ pci_read_config_dword(dev, base, &maskbits); - temp = (1 << multi_msi_capable(control)); - temp = ((temp - 1) & ~temp); + temp = msi_mask((control & PCI_MSI_FLAGS_QMASK) >> 1); maskbits |= temp; pci_write_config_dword(dev, base, maskbits); entry->msi_attrib.maskbits_mask = temp; diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 9de07b75b993..93eac1423585 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -355,6 +355,8 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state) int i = 0; if (drv && drv->suspend) { + pci_power_t prev = pci_dev->current_state; + pci_dev->state_saved = false; i = drv->suspend(pci_dev, state); @@ -365,8 +367,13 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state) if (pci_dev->state_saved) goto Fixup; - if (WARN_ON_ONCE(pci_dev->current_state != PCI_D0)) + if (pci_dev->current_state != PCI_D0 + && pci_dev->current_state != PCI_UNKNOWN) { + WARN_ONCE(pci_dev->current_state != prev, + "PCI PM: Device state not saved by %pF\n", + drv->suspend); goto Fixup; + } } pci_save_state(pci_dev); @@ -419,38 +426,24 @@ static int pci_legacy_resume(struct device *dev) static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev) { pci_restore_standard_config(pci_dev); + pci_dev->state_saved = false; pci_fixup_device(pci_fixup_resume_early, pci_dev); } -static int pci_pm_default_resume(struct pci_dev *pci_dev) +static void pci_pm_default_resume(struct pci_dev *pci_dev) { pci_fixup_device(pci_fixup_resume, pci_dev); if (!pci_is_bridge(pci_dev)) pci_enable_wake(pci_dev, PCI_D0, false); - - return pci_pm_reenable_device(pci_dev); -} - -static void pci_pm_default_suspend_generic(struct pci_dev *pci_dev) -{ - /* If device is enabled at this point, disable it */ - pci_disable_enabled_device(pci_dev); - /* - * Save state with interrupts enabled, because in principle the bus the - * device is on may be put into a low power state after this code runs. - */ - pci_save_state(pci_dev); } static void pci_pm_default_suspend(struct pci_dev *pci_dev) { - pci_pm_default_suspend_generic(pci_dev); - + /* Disable non-bridge devices without PM support */ if (!pci_is_bridge(pci_dev)) - pci_prepare_to_sleep(pci_dev); - - pci_fixup_device(pci_fixup_suspend, pci_dev); + pci_disable_enabled_device(pci_dev); + pci_save_state(pci_dev); } static bool pci_has_legacy_pm_support(struct pci_dev *pci_dev) @@ -495,21 +488,49 @@ static void pci_pm_complete(struct device *dev) static int pci_pm_suspend(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct device_driver *drv = dev->driver; - int error = 0; + struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_suspend(dev, PMSG_SUSPEND); - if (drv && drv->pm && drv->pm->suspend) { - error = drv->pm->suspend(dev); - suspend_report_result(drv->pm->suspend, error); + if (!pm) { + pci_pm_default_suspend(pci_dev); + goto Fixup; } - if (!error) - pci_pm_default_suspend(pci_dev); + pci_dev->state_saved = false; - return error; + if (pm->suspend) { + pci_power_t prev = pci_dev->current_state; + int error; + + error = pm->suspend(dev); + suspend_report_result(pm->suspend, error); + if (error) + return error; + + if (pci_dev->state_saved) + goto Fixup; + + if (pci_dev->current_state != PCI_D0 + && pci_dev->current_state != PCI_UNKNOWN) { + WARN_ONCE(pci_dev->current_state != prev, + "PCI PM: State of device not saved by %pF\n", + pm->suspend); + goto Fixup; + } + } + + if (!pci_dev->state_saved) { + pci_save_state(pci_dev); + if (!pci_is_bridge(pci_dev)) + pci_prepare_to_sleep(pci_dev); + } + + Fixup: + pci_fixup_device(pci_fixup_suspend, pci_dev); + + return 0; } static int pci_pm_suspend_noirq(struct device *dev) @@ -552,18 +573,29 @@ static int pci_pm_resume_noirq(struct device *dev) static int pci_pm_resume(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct device_driver *drv = dev->driver; + struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; int error = 0; + /* + * This is necessary for the suspend error path in which resume is + * called without restoring the standard config registers of the device. + */ + if (pci_dev->state_saved) + pci_restore_standard_config(pci_dev); + if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume(dev); - error = pci_pm_default_resume(pci_dev); + pci_pm_default_resume(pci_dev); - if (!error && drv && drv->pm && drv->pm->resume) - error = drv->pm->resume(dev); + if (pm) { + if (pm->resume) + error = pm->resume(dev); + } else { + pci_pm_reenable_device(pci_dev); + } - return error; + return 0; } #else /* !CONFIG_SUSPEND */ @@ -580,21 +612,31 @@ static int pci_pm_resume(struct device *dev) static int pci_pm_freeze(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct device_driver *drv = dev->driver; - int error = 0; + struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_suspend(dev, PMSG_FREEZE); - if (drv && drv->pm && drv->pm->freeze) { - error = drv->pm->freeze(dev); - suspend_report_result(drv->pm->freeze, error); + if (!pm) { + pci_pm_default_suspend(pci_dev); + return 0; + } + + pci_dev->state_saved = false; + + if (pm->freeze) { + int error; + + error = pm->freeze(dev); + suspend_report_result(pm->freeze, error); + if (error) + return error; } - if (!error) - pci_pm_default_suspend_generic(pci_dev); + if (!pci_dev->state_saved) + pci_save_state(pci_dev); - return error; + return 0; } static int pci_pm_freeze_noirq(struct device *dev) @@ -637,16 +679,18 @@ static int pci_pm_thaw_noirq(struct device *dev) static int pci_pm_thaw(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct device_driver *drv = dev->driver; + struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; int error = 0; if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume(dev); - pci_pm_reenable_device(pci_dev); - - if (drv && drv->pm && drv->pm->thaw) - error = drv->pm->thaw(dev); + if (pm) { + if (pm->thaw) + error = pm->thaw(dev); + } else { + pci_pm_reenable_device(pci_dev); + } return error; } @@ -654,19 +698,29 @@ static int pci_pm_thaw(struct device *dev) static int pci_pm_poweroff(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct device_driver *drv = dev->driver; + struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; int error = 0; if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_suspend(dev, PMSG_HIBERNATE); - if (drv && drv->pm && drv->pm->poweroff) { - error = drv->pm->poweroff(dev); - suspend_report_result(drv->pm->poweroff, error); + if (!pm) { + pci_pm_default_suspend(pci_dev); + goto Fixup; } - if (!error) - pci_pm_default_suspend(pci_dev); + pci_dev->state_saved = false; + + if (pm->poweroff) { + error = pm->poweroff(dev); + suspend_report_result(pm->poweroff, error); + } + + if (!pci_dev->state_saved && !pci_is_bridge(pci_dev)) + pci_prepare_to_sleep(pci_dev); + + Fixup: + pci_fixup_device(pci_fixup_suspend, pci_dev); return error; } @@ -707,16 +761,27 @@ static int pci_pm_restore_noirq(struct device *dev) static int pci_pm_restore(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct device_driver *drv = dev->driver; + struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; int error = 0; + /* + * This is necessary for the hibernation error path in which restore is + * called without restoring the standard config registers of the device. + */ + if (pci_dev->state_saved) + pci_restore_standard_config(pci_dev); + if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume(dev); - error = pci_pm_default_resume(pci_dev); + pci_pm_default_resume(pci_dev); - if (!error && drv && drv->pm && drv->pm->restore) - error = drv->pm->restore(dev); + if (pm) { + if (pm->restore) + error = pm->restore(dev); + } else { + pci_pm_reenable_device(pci_dev); + } return error; } diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index db7ec14fa719..dfc4e0ddf241 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -768,8 +768,8 @@ pci_read_rom(struct kobject *kobj, struct bin_attribute *bin_attr, return -EINVAL; rom = pci_map_rom(pdev, &size); /* size starts out as PCI window size */ - if (!rom) - return 0; + if (!rom || !size) + return -EIO; if (off >= size) count = 0; diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 17bd9325a245..e3efe6b19ee7 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1393,35 +1393,35 @@ int pci_restore_standard_config(struct pci_dev *dev) pci_power_t prev_state; int error; - pci_restore_state(dev); pci_update_current_state(dev, PCI_D0); prev_state = dev->current_state; if (prev_state == PCI_D0) - return 0; + goto Restore; error = pci_raw_set_power_state(dev, PCI_D0, false); if (error) return error; - if (pci_is_bridge(dev)) { - if (prev_state > PCI_D1) - mdelay(PCI_PM_BUS_WAIT); - } else { - switch(prev_state) { - case PCI_D3cold: - case PCI_D3hot: - mdelay(pci_pm_d3_delay); - break; - case PCI_D2: - udelay(PCI_PM_D2_DELAY); - break; - } + /* + * This assumes that we won't get a bus in B2 or B3 from the BIOS, but + * we've made this assumption forever and it appears to be universally + * satisfied. + */ + switch(prev_state) { + case PCI_D3cold: + case PCI_D3hot: + mdelay(pci_pm_d3_delay); + break; + case PCI_D2: + udelay(PCI_PM_D2_DELAY); + break; } - dev->current_state = PCI_D0; + pci_update_current_state(dev, PCI_D0); - return 0; + Restore: + return dev->state_saved ? pci_restore_state(dev) : 0; } /** diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 586b6f75910d..b0367f168af4 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -718,9 +718,9 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev) /* * All PCIe functions are in one slot, remove one function will remove - * the the whole slot, so just wait + * the whole slot, so just wait until we are the last function left. */ - if (!list_empty(&parent->subordinate->devices)) + if (!list_is_last(&pdev->bus_list, &parent->subordinate->devices)) goto out; /* All functions are removed, so just disable ASPM for the link */ diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 99a914a027f8..f9b874eaeb9f 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -55,25 +55,13 @@ static int pcie_portdrv_suspend(struct pci_dev *dev, pm_message_t state) } -static int pcie_portdrv_suspend_late(struct pci_dev *dev, pm_message_t state) -{ - return pci_save_state(dev); -} - -static int pcie_portdrv_resume_early(struct pci_dev *dev) -{ - return pci_restore_state(dev); -} - static int pcie_portdrv_resume(struct pci_dev *dev) { - pcie_portdrv_restore_config(dev); + pci_set_master(dev); return pcie_port_device_resume(dev); } #else #define pcie_portdrv_suspend NULL -#define pcie_portdrv_suspend_late NULL -#define pcie_portdrv_resume_early NULL #define pcie_portdrv_resume NULL #endif @@ -292,8 +280,6 @@ static struct pci_driver pcie_portdriver = { .remove = pcie_portdrv_remove, .suspend = pcie_portdrv_suspend, - .suspend_late = pcie_portdrv_suspend_late, - .resume_early = pcie_portdrv_resume_early, .resume = pcie_portdrv_resume, .err_handler = &pcie_portdrv_err_handler, diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index 132a78159b60..29cbe47f219f 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -63,7 +63,7 @@ void pci_disable_rom(struct pci_dev *pdev) * The PCI window size could be much larger than the * actual image size. */ -size_t pci_get_rom_size(void __iomem *rom, size_t size) +size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size) { void __iomem *image; int last_image; @@ -72,8 +72,10 @@ size_t pci_get_rom_size(void __iomem *rom, size_t size) do { void __iomem *pds; /* Standard PCI ROMs start out with these bytes 55 AA */ - if (readb(image) != 0x55) + if (readb(image) != 0x55) { + dev_err(&pdev->dev, "Invalid ROM contents\n"); break; + } if (readb(image + 1) != 0xAA) break; /* get the PCI data structure and check its signature */ @@ -159,7 +161,7 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size) * size is much larger than the actual size of the ROM. * True size is important if the ROM is going to be copied. */ - *size = pci_get_rom_size(rom, *size); + *size = pci_get_rom_size(pdev, rom, *size); return rom; } diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 1a266d4ab5f1..94363115a42a 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -42,6 +42,7 @@ config ASUS_LAPTOP depends on LEDS_CLASS depends on NEW_LEDS depends on BACKLIGHT_CLASS_DEVICE + depends on INPUT ---help--- This is the new Linux driver for Asus laptops. It may also support some MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index 8fb8b3591048..56af6cf385b0 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -46,6 +46,7 @@ #include <acpi/acpi_drivers.h> #include <acpi/acpi_bus.h> #include <asm/uaccess.h> +#include <linux/input.h> #define ASUS_LAPTOP_VERSION "0.42" @@ -181,6 +182,8 @@ struct asus_hotk { u8 light_level; //light sensor level u8 light_switch; //light sensor switch value u16 event_count[128]; //count for each event TODO make this better + struct input_dev *inputdev; + u16 *keycode_map; }; /* @@ -250,6 +253,37 @@ ASUS_LED(rled, "record"); ASUS_LED(pled, "phone"); ASUS_LED(gled, "gaming"); +struct key_entry { + char type; + u8 code; + u16 keycode; +}; + +enum { KE_KEY, KE_END }; + +static struct key_entry asus_keymap[] = { + {KE_KEY, 0x30, KEY_VOLUMEUP}, + {KE_KEY, 0x31, KEY_VOLUMEDOWN}, + {KE_KEY, 0x32, KEY_MUTE}, + {KE_KEY, 0x33, KEY_SWITCHVIDEOMODE}, + {KE_KEY, 0x34, KEY_SWITCHVIDEOMODE}, + {KE_KEY, 0x40, KEY_PREVIOUSSONG}, + {KE_KEY, 0x41, KEY_NEXTSONG}, + {KE_KEY, 0x43, KEY_STOP}, + {KE_KEY, 0x45, KEY_PLAYPAUSE}, + {KE_KEY, 0x50, KEY_EMAIL}, + {KE_KEY, 0x51, KEY_WWW}, + {KE_KEY, 0x5C, BTN_EXTRA}, /* Performance */ + {KE_KEY, 0x5D, KEY_WLAN}, + {KE_KEY, 0x61, KEY_SWITCHVIDEOMODE}, + {KE_KEY, 0x6B, BTN_TOUCH}, /* Lock Mouse */ + {KE_KEY, 0x82, KEY_CAMERA}, + {KE_KEY, 0x8A, KEY_TV}, + {KE_KEY, 0x95, KEY_MEDIA}, + {KE_KEY, 0x99, KEY_PHONE}, + {KE_END, 0}, +}; + /* * This function evaluates an ACPI method, given an int as parameter, the * method is searched within the scope of the handle, can be NULL. The output @@ -720,8 +754,68 @@ static ssize_t store_gps(struct device *dev, struct device_attribute *attr, return store_status(buf, count, NULL, GPS_ON); } +/* + * Hotkey functions + */ +static struct key_entry *asus_get_entry_by_scancode(int code) +{ + struct key_entry *key; + + for (key = asus_keymap; key->type != KE_END; key++) + if (code == key->code) + return key; + + return NULL; +} + +static struct key_entry *asus_get_entry_by_keycode(int code) +{ + struct key_entry *key; + + for (key = asus_keymap; key->type != KE_END; key++) + if (code == key->keycode && key->type == KE_KEY) + return key; + + return NULL; +} + +static int asus_getkeycode(struct input_dev *dev, int scancode, int *keycode) +{ + struct key_entry *key = asus_get_entry_by_scancode(scancode); + + if (key && key->type == KE_KEY) { + *keycode = key->keycode; + return 0; + } + + return -EINVAL; +} + +static int asus_setkeycode(struct input_dev *dev, int scancode, int keycode) +{ + struct key_entry *key; + int old_keycode; + + if (keycode < 0 || keycode > KEY_MAX) + return -EINVAL; + + key = asus_get_entry_by_scancode(scancode); + if (key && key->type == KE_KEY) { + old_keycode = key->keycode; + key->keycode = keycode; + set_bit(keycode, dev->keybit); + if (!asus_get_entry_by_keycode(old_keycode)) + clear_bit(old_keycode, dev->keybit); + return 0; + } + + return -EINVAL; +} + static void asus_hotk_notify(acpi_handle handle, u32 event, void *data) { + static struct key_entry *key; + /* TODO Find a better way to handle events count. */ if (!hotk) return; @@ -738,10 +832,24 @@ static void asus_hotk_notify(acpi_handle handle, u32 event, void *data) lcd_blank(FB_BLANK_POWERDOWN); } - acpi_bus_generate_proc_event(hotk->device, event, - hotk->event_count[event % 128]++); - - return; + acpi_bus_generate_netlink_event(hotk->device->pnp.device_class, + dev_name(&hotk->device->dev), event, + hotk->event_count[event % 128]++); + + if (hotk->inputdev) { + key = asus_get_entry_by_scancode(event); + if (!key) + return ; + + switch (key->type) { + case KE_KEY: + input_report_key(hotk->inputdev, key->keycode, 1); + input_sync(hotk->inputdev); + input_report_key(hotk->inputdev, key->keycode, 0); + input_sync(hotk->inputdev); + break; + } + } } #define ASUS_CREATE_DEVICE_ATTR(_name) \ @@ -959,6 +1067,38 @@ static int asus_hotk_get_info(void) return AE_OK; } +static int asus_input_init(void) +{ + const struct key_entry *key; + int result; + + hotk->inputdev = input_allocate_device(); + if (!hotk->inputdev) { + printk(ASUS_INFO "Unable to allocate input device\n"); + return 0; + } + hotk->inputdev->name = "Asus Laptop extra buttons"; + hotk->inputdev->phys = ASUS_HOTK_FILE "/input0"; + hotk->inputdev->id.bustype = BUS_HOST; + hotk->inputdev->getkeycode = asus_getkeycode; + hotk->inputdev->setkeycode = asus_setkeycode; + + for (key = asus_keymap; key->type != KE_END; key++) { + switch (key->type) { + case KE_KEY: + set_bit(EV_KEY, hotk->inputdev->evbit); + set_bit(key->keycode, hotk->inputdev->keybit); + break; + } + } + result = input_register_device(hotk->inputdev); + if (result) { + printk(ASUS_INFO "Unable to register input device\n"); + input_free_device(hotk->inputdev); + } + return result; +} + static int asus_hotk_check(void) { int result = 0; @@ -1044,7 +1184,7 @@ static int asus_hotk_add(struct acpi_device *device) /* GPS is on by default */ write_status(NULL, 1, GPS_ON); - end: +end: if (result) { kfree(hotk->name); kfree(hotk); @@ -1091,10 +1231,17 @@ static void asus_led_exit(void) ASUS_LED_UNREGISTER(gled); } +static void asus_input_exit(void) +{ + if (hotk->inputdev) + input_unregister_device(hotk->inputdev); +} + static void __exit asus_laptop_exit(void) { asus_backlight_exit(); asus_led_exit(); + asus_input_exit(); acpi_bus_unregister_driver(&asus_hotk_driver); sysfs_remove_group(&asuspf_device->dev.kobj, &asuspf_attribute_group); @@ -1216,6 +1363,10 @@ static int __init asus_laptop_init(void) printk(ASUS_INFO "Brightness ignored, must be controlled by " "ACPI video driver\n"); + result = asus_input_init(); + if (result) + goto fail_input; + result = asus_led_init(dev); if (result) goto fail_led; @@ -1242,22 +1393,25 @@ static int __init asus_laptop_init(void) return 0; - fail_sysfs: +fail_sysfs: platform_device_del(asuspf_device); - fail_platform_device2: +fail_platform_device2: platform_device_put(asuspf_device); - fail_platform_device1: +fail_platform_device1: platform_driver_unregister(&asuspf_driver); - fail_platform_driver: +fail_platform_driver: asus_led_exit(); - fail_led: +fail_led: + asus_input_exit(); + +fail_input: asus_backlight_exit(); - fail_backlight: +fail_backlight: return result; } diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c index 1e74988c7b2d..d63f26e666a4 100644 --- a/drivers/platform/x86/asus_acpi.c +++ b/drivers/platform/x86/asus_acpi.c @@ -143,6 +143,7 @@ struct asus_hotk { S1300N, S5200N*/ A4S, /* Z81sp */ F3Sa, /* (Centrino) */ + R1F, END_MODEL } model; /* Models currently supported */ u16 event_count[128]; /* Count for each event TODO make this better */ @@ -420,7 +421,18 @@ static struct model_data model_conf[END_MODEL] = { .display_get = "\\ADVG", .display_set = "SDSP", }, - + { + .name = "R1F", + .mt_bt_switch = "BLED", + .mt_mled = "MLED", + .mt_wled = "WLED", + .mt_lcd_switch = "\\Q10", + .lcd_status = "\\GP06", + .brightness_set = "SPLV", + .brightness_get = "GPLV", + .display_set = "SDSP", + .display_get = "\\INFB" + } }; /* procdir we use */ @@ -1165,6 +1177,8 @@ static int asus_model_match(char *model) return W3V; else if (strncmp(model, "W5A", 3) == 0) return W5A; + else if (strncmp(model, "R1F", 3) == 0) + return R1F; else if (strncmp(model, "A4S", 3) == 0) return A4S; else if (strncmp(model, "F3Sa", 4) == 0) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 9d93cb971e59..786ed8661cb0 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -30,6 +30,7 @@ #include <linux/uaccess.h> #include <linux/input.h> #include <linux/rfkill.h> +#include <linux/pci.h> #define EEEPC_LAPTOP_VERSION "0.1" @@ -161,6 +162,10 @@ static struct key_entry eeepc_keymap[] = { {KE_KEY, 0x13, KEY_MUTE }, {KE_KEY, 0x14, KEY_VOLUMEDOWN }, {KE_KEY, 0x15, KEY_VOLUMEUP }, + {KE_KEY, 0x1a, KEY_COFFEE }, + {KE_KEY, 0x1b, KEY_ZOOM }, + {KE_KEY, 0x1c, KEY_PROG2 }, + {KE_KEY, 0x1d, KEY_PROG3 }, {KE_KEY, 0x30, KEY_SWITCHVIDEOMODE }, {KE_KEY, 0x31, KEY_SWITCHVIDEOMODE }, {KE_KEY, 0x32, KEY_SWITCHVIDEOMODE }, @@ -510,7 +515,43 @@ static int eeepc_hotk_check(void) static void notify_brn(void) { struct backlight_device *bd = eeepc_backlight_device; - bd->props.brightness = read_brightness(bd); + if (bd) + bd->props.brightness = read_brightness(bd); +} + +static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) +{ + struct pci_dev *dev; + struct pci_bus *bus = pci_find_bus(0, 1); + + if (event != ACPI_NOTIFY_BUS_CHECK) + return; + + if (!bus) { + printk(EEEPC_WARNING "Unable to find PCI bus 1?\n"); + return; + } + + if (get_acpi(CM_ASL_WLAN) == 1) { + dev = pci_get_slot(bus, 0); + if (dev) { + /* Device already present */ + pci_dev_put(dev); + return; + } + dev = pci_scan_single_device(bus, 0); + if (dev) { + pci_bus_assign_resources(bus); + if (pci_bus_add_device(dev)) + printk(EEEPC_ERR "Unable to hotplug wifi\n"); + } + } else { + dev = pci_get_slot(bus, 0); + if (dev) { + pci_remove_bus_device(dev); + pci_dev_put(dev); + } + } } static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data) @@ -520,8 +561,9 @@ static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data) return; if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX) notify_brn(); - acpi_bus_generate_proc_event(ehotk->device, event, - ehotk->event_count[event % 128]++); + acpi_bus_generate_netlink_event(ehotk->device->pnp.device_class, + dev_name(&ehotk->device->dev), event, + ehotk->event_count[event % 128]++); if (ehotk->inputdev) { key = eepc_get_entry_by_scancode(event); if (key) { @@ -539,6 +581,45 @@ static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data) } } +static int eeepc_register_rfkill_notifier(char *node) +{ + acpi_status status = AE_OK; + acpi_handle handle; + + status = acpi_get_handle(NULL, node, &handle); + + if (ACPI_SUCCESS(status)) { + status = acpi_install_notify_handler(handle, + ACPI_SYSTEM_NOTIFY, + eeepc_rfkill_notify, + NULL); + if (ACPI_FAILURE(status)) + printk(EEEPC_WARNING + "Failed to register notify on %s\n", node); + } else + return -ENODEV; + + return 0; +} + +static void eeepc_unregister_rfkill_notifier(char *node) +{ + acpi_status status = AE_OK; + acpi_handle handle; + + status = acpi_get_handle(NULL, node, &handle); + + if (ACPI_SUCCESS(status)) { + status = acpi_remove_notify_handler(handle, + ACPI_SYSTEM_NOTIFY, + eeepc_rfkill_notify); + if (ACPI_FAILURE(status)) + printk(EEEPC_ERR + "Error removing rfkill notify handler %s\n", + node); + } +} + static int eeepc_hotk_add(struct acpi_device *device) { acpi_status status = AE_OK; @@ -558,7 +639,7 @@ static int eeepc_hotk_add(struct acpi_device *device) ehotk->device = device; result = eeepc_hotk_check(); if (result) - goto end; + goto ehotk_fail; status = acpi_install_notify_handler(ehotk->handle, ACPI_SYSTEM_NOTIFY, eeepc_hotk_notify, ehotk); if (ACPI_FAILURE(status)) @@ -569,18 +650,25 @@ static int eeepc_hotk_add(struct acpi_device *device) RFKILL_TYPE_WLAN); if (!ehotk->eeepc_wlan_rfkill) - goto end; + goto wlan_fail; ehotk->eeepc_wlan_rfkill->name = "eeepc-wlan"; ehotk->eeepc_wlan_rfkill->toggle_radio = eeepc_wlan_rfkill_set; ehotk->eeepc_wlan_rfkill->get_state = eeepc_wlan_rfkill_state; - if (get_acpi(CM_ASL_WLAN) == 1) + if (get_acpi(CM_ASL_WLAN) == 1) { ehotk->eeepc_wlan_rfkill->state = RFKILL_STATE_UNBLOCKED; - else + rfkill_set_default(RFKILL_TYPE_WLAN, + RFKILL_STATE_UNBLOCKED); + } else { ehotk->eeepc_wlan_rfkill->state = RFKILL_STATE_SOFT_BLOCKED; - rfkill_register(ehotk->eeepc_wlan_rfkill); + rfkill_set_default(RFKILL_TYPE_WLAN, + RFKILL_STATE_SOFT_BLOCKED); + } + result = rfkill_register(ehotk->eeepc_wlan_rfkill); + if (result) + goto wlan_fail; } if (get_acpi(CM_ASL_BLUETOOTH) != -1) { @@ -588,27 +676,47 @@ static int eeepc_hotk_add(struct acpi_device *device) rfkill_allocate(&device->dev, RFKILL_TYPE_BLUETOOTH); if (!ehotk->eeepc_bluetooth_rfkill) - goto end; + goto bluetooth_fail; ehotk->eeepc_bluetooth_rfkill->name = "eeepc-bluetooth"; ehotk->eeepc_bluetooth_rfkill->toggle_radio = eeepc_bluetooth_rfkill_set; ehotk->eeepc_bluetooth_rfkill->get_state = eeepc_bluetooth_rfkill_state; - if (get_acpi(CM_ASL_BLUETOOTH) == 1) + if (get_acpi(CM_ASL_BLUETOOTH) == 1) { ehotk->eeepc_bluetooth_rfkill->state = RFKILL_STATE_UNBLOCKED; - else + rfkill_set_default(RFKILL_TYPE_BLUETOOTH, + RFKILL_STATE_UNBLOCKED); + } else { ehotk->eeepc_bluetooth_rfkill->state = RFKILL_STATE_SOFT_BLOCKED; - rfkill_register(ehotk->eeepc_bluetooth_rfkill); - } + rfkill_set_default(RFKILL_TYPE_BLUETOOTH, + RFKILL_STATE_SOFT_BLOCKED); + } - end: - if (result) { - kfree(ehotk); - ehotk = NULL; + result = rfkill_register(ehotk->eeepc_bluetooth_rfkill); + if (result) + goto bluetooth_fail; } + + eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6"); + eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7"); + + return 0; + + bluetooth_fail: + if (ehotk->eeepc_bluetooth_rfkill) + rfkill_free(ehotk->eeepc_bluetooth_rfkill); + rfkill_unregister(ehotk->eeepc_wlan_rfkill); + ehotk->eeepc_wlan_rfkill = NULL; + wlan_fail: + if (ehotk->eeepc_wlan_rfkill) + rfkill_free(ehotk->eeepc_wlan_rfkill); + ehotk_fail: + kfree(ehotk); + ehotk = NULL; + return result; } @@ -622,6 +730,10 @@ static int eeepc_hotk_remove(struct acpi_device *device, int type) eeepc_hotk_notify); if (ACPI_FAILURE(status)) printk(EEEPC_ERR "Error removing notify handler\n"); + + eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); + eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); + kfree(ehotk); return 0; } @@ -737,13 +849,21 @@ static void eeepc_backlight_exit(void) { if (eeepc_backlight_device) backlight_device_unregister(eeepc_backlight_device); - if (ehotk->inputdev) - input_unregister_device(ehotk->inputdev); + eeepc_backlight_device = NULL; +} + +static void eeepc_rfkill_exit(void) +{ if (ehotk->eeepc_wlan_rfkill) rfkill_unregister(ehotk->eeepc_wlan_rfkill); if (ehotk->eeepc_bluetooth_rfkill) rfkill_unregister(ehotk->eeepc_bluetooth_rfkill); - eeepc_backlight_device = NULL; +} + +static void eeepc_input_exit(void) +{ + if (ehotk->inputdev) + input_unregister_device(ehotk->inputdev); } static void eeepc_hwmon_exit(void) @@ -762,6 +882,8 @@ static void eeepc_hwmon_exit(void) static void __exit eeepc_laptop_exit(void) { eeepc_backlight_exit(); + eeepc_rfkill_exit(); + eeepc_input_exit(); eeepc_hwmon_exit(); acpi_bus_unregister_driver(&eeepc_hotk_driver); sysfs_remove_group(&platform_device->dev.kobj, @@ -865,6 +987,8 @@ fail_platform_driver: fail_hwmon: eeepc_backlight_exit(); fail_backlight: + eeepc_input_exit(); + eeepc_rfkill_exit(); return result; } diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 7c789f0a94d7..f41135f2fb29 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -382,6 +382,11 @@ static int __init hp_wmi_input_setup(void) case KE_SW: set_bit(EV_SW, hp_wmi_input_dev->evbit); set_bit(key->keycode, hp_wmi_input_dev->swbit); + + /* Set initial dock state */ + input_report_switch(hp_wmi_input_dev, key->keycode, + hp_wmi_dock_state()); + input_sync(hp_wmi_input_dev); break; } } @@ -441,6 +446,7 @@ static int __init hp_wmi_bios_setup(struct platform_device *device) bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set; bluetooth_rfkill->user_claim_unsupported = 1; err = rfkill_register(bluetooth_rfkill); + if (err) goto register_bluetooth_error; } @@ -457,9 +463,11 @@ static int __init hp_wmi_bios_setup(struct platform_device *device) return 0; register_wwan_err: - rfkill_unregister(bluetooth_rfkill); + if (bluetooth_rfkill) + rfkill_unregister(bluetooth_rfkill); register_bluetooth_error: - rfkill_unregister(wifi_rfkill); + if (wifi_rfkill) + rfkill_unregister(wifi_rfkill); add_sysfs_error: cleanup_sysfs(device); return err; diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c index f30db367c82e..c47a44dcb702 100644 --- a/drivers/platform/x86/panasonic-laptop.c +++ b/drivers/platform/x86/panasonic-laptop.c @@ -507,7 +507,7 @@ static void acpi_pcc_generate_keyinput(struct pcc_acpi *pcc) hkey_num = result & 0xf; - if (hkey_num < 0 || hkey_num > ARRAY_SIZE(pcc->keymap)) { + if (hkey_num < 0 || hkey_num >= ARRAY_SIZE(pcc->keymap)) { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "hotkey number out of range: %d\n", hkey_num)); diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c index e988ec130fcd..41aec2acbb91 100644 --- a/drivers/power/pcf50633-charger.c +++ b/drivers/power/pcf50633-charger.c @@ -199,7 +199,8 @@ static int adapter_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) { - struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, usb); + struct pcf50633_mbc *mbc = container_of(psy, + struct pcf50633_mbc, adapter); int ret = 0; switch (psp) { diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c index 366565aba865..c175e38a4cd5 100644 --- a/drivers/regulator/bq24022.c +++ b/drivers/regulator/bq24022.c @@ -152,11 +152,7 @@ static void __exit bq24022_exit(void) platform_driver_unregister(&bq24022_driver); } -/* - * make sure this is probed before gpio_vbus and pda_power, - * but after asic3 or other GPIO expander drivers. - */ -subsys_initcall(bq24022_init); +module_init(bq24022_init); module_exit(bq24022_exit); MODULE_AUTHOR("Philipp Zabel"); diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 7aa35248181b..5056e23e4414 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -1435,7 +1435,7 @@ int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink, struct platform_device *pdev; int ret; - if (lednum > ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) { + if (lednum >= ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) { dev_err(wm8350->dev, "Invalid LED index %d\n", lednum); return -ENODEV; } diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index cced4d108319..81450fbd8b12 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -241,6 +241,12 @@ config RTC_DRV_M41T80_WDT If you say Y here you will get support for the watchdog timer in the ST M41T60 and M41T80 RTC chips series. +config RTC_DRV_DM355EVM + tristate "TI DaVinci DM355 EVM RTC" + depends on MFD_DM355EVM_MSP + help + Supports the RTC firmware in the MSP430 on the DM355 EVM. + config RTC_DRV_TWL92330 boolean "TI TWL92330/Menelaus" depends on MENELAUS diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 6e28021abb9d..0e697aa51caa 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o obj-$(CONFIG_RTC_DRV_AU1XXX) += rtc-au1xxx.o obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o +obj-$(CONFIG_RTC_DRV_DM355EVM) += rtc-dm355evm.o obj-$(CONFIG_RTC_DRV_DS1216) += rtc-ds1216.o obj-$(CONFIG_RTC_DRV_DS1286) += rtc-ds1286.o obj-$(CONFIG_RTC_DRV_DS1302) += rtc-ds1302.o diff --git a/drivers/rtc/rtc-au1xxx.c b/drivers/rtc/rtc-au1xxx.c index 8906a688e6a6..979ed0406ce9 100644 --- a/drivers/rtc/rtc-au1xxx.c +++ b/drivers/rtc/rtc-au1xxx.c @@ -81,7 +81,7 @@ static int __devinit au1xtoy_rtc_probe(struct platform_device *pdev) if (au_readl(SYS_TOYTRIM) != 32767) { /* wait until hardware gives access to TRIM register */ t = 0x00100000; - while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S) && t--) + while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S) && --t) msleep(1); if (!t) { diff --git a/drivers/rtc/rtc-dm355evm.c b/drivers/rtc/rtc-dm355evm.c new file mode 100644 index 000000000000..58d4e18530da --- /dev/null +++ b/drivers/rtc/rtc-dm355evm.c @@ -0,0 +1,175 @@ +/* + * rtc-dm355evm.c - access battery-backed counter in MSP430 firmware + * + * Copyright (c) 2008 by David Brownell + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/rtc.h> +#include <linux/platform_device.h> + +#include <linux/i2c/dm355evm_msp.h> + + +/* + * The MSP430 firmware on the DM355 EVM uses a watch crystal to feed + * a 1 Hz counter. When a backup battery is supplied, that makes a + * reasonable RTC for applications where alarms and non-NTP drift + * compensation aren't important. + * + * The only real glitch is the inability to read or write all four + * counter bytes atomically: the count may increment in the middle + * of an operation, causing trouble when the LSB rolls over. + * + * This driver was tested with firmware revision A4. + */ +union evm_time { + u8 bytes[4]; + u32 value; +}; + +static int dm355evm_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + union evm_time time; + int status; + int tries = 0; + + do { + /* + * Read LSB(0) to MSB(3) bytes. Defend against the counter + * rolling over by re-reading until the value is stable, + * and assuming the four reads take at most a few seconds. + */ + status = dm355evm_msp_read(DM355EVM_MSP_RTC_0); + if (status < 0) + return status; + if (tries && time.bytes[0] == status) + break; + time.bytes[0] = status; + + status = dm355evm_msp_read(DM355EVM_MSP_RTC_1); + if (status < 0) + return status; + if (tries && time.bytes[1] == status) + break; + time.bytes[1] = status; + + status = dm355evm_msp_read(DM355EVM_MSP_RTC_2); + if (status < 0) + return status; + if (tries && time.bytes[2] == status) + break; + time.bytes[2] = status; + + status = dm355evm_msp_read(DM355EVM_MSP_RTC_3); + if (status < 0) + return status; + if (tries && time.bytes[3] == status) + break; + time.bytes[3] = status; + + } while (++tries < 5); + + dev_dbg(dev, "read timestamp %08x\n", time.value); + + rtc_time_to_tm(le32_to_cpu(time.value), tm); + return 0; +} + +static int dm355evm_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + union evm_time time; + unsigned long value; + int status; + + rtc_tm_to_time(tm, &value); + time.value = cpu_to_le32(value); + + dev_dbg(dev, "write timestamp %08x\n", time.value); + + /* + * REVISIT handle non-atomic writes ... maybe just retry until + * byte[1] sticks (no rollover)? + */ + status = dm355evm_msp_write(time.bytes[0], DM355EVM_MSP_RTC_0); + if (status < 0) + return status; + + status = dm355evm_msp_write(time.bytes[1], DM355EVM_MSP_RTC_1); + if (status < 0) + return status; + + status = dm355evm_msp_write(time.bytes[2], DM355EVM_MSP_RTC_2); + if (status < 0) + return status; + + status = dm355evm_msp_write(time.bytes[3], DM355EVM_MSP_RTC_3); + if (status < 0) + return status; + + return 0; +} + +static struct rtc_class_ops dm355evm_rtc_ops = { + .read_time = dm355evm_rtc_read_time, + .set_time = dm355evm_rtc_set_time, +}; + +/*----------------------------------------------------------------------*/ + +static int __devinit dm355evm_rtc_probe(struct platform_device *pdev) +{ + struct rtc_device *rtc; + + rtc = rtc_device_register(pdev->name, + &pdev->dev, &dm355evm_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + dev_err(&pdev->dev, "can't register RTC device, err %ld\n", + PTR_ERR(rtc)); + return PTR_ERR(rtc); + } + platform_set_drvdata(pdev, rtc); + + return 0; +} + +static int __devexit dm355evm_rtc_remove(struct platform_device *pdev) +{ + struct rtc_device *rtc = platform_get_drvdata(pdev); + + rtc_device_unregister(rtc); + platform_set_drvdata(pdev, NULL); + return 0; +} + +/* + * I2C is used to talk to the MSP430, but this platform device is + * exposed by an MFD driver that manages I2C communications. + */ +static struct platform_driver rtc_dm355evm_driver = { + .probe = dm355evm_rtc_probe, + .remove = __devexit_p(dm355evm_rtc_remove), + .driver = { + .owner = THIS_MODULE, + .name = "rtc-dm355evm", + }, +}; + +static int __init dm355evm_rtc_init(void) +{ + return platform_driver_register(&rtc_dm355evm_driver); +} +module_init(dm355evm_rtc_init); + +static void __exit dm355evm_rtc_exit(void) +{ + platform_driver_unregister(&rtc_dm355evm_driver); +} +module_exit(dm355evm_rtc_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-ds1390.c b/drivers/rtc/rtc-ds1390.c index e54b5c619bdf..e01b955db077 100644 --- a/drivers/rtc/rtc-ds1390.c +++ b/drivers/rtc/rtc-ds1390.c @@ -122,7 +122,6 @@ static const struct rtc_class_ops ds1390_rtc_ops = { static int __devinit ds1390_probe(struct spi_device *spi) { - struct rtc_device *rtc; unsigned char tmp; struct ds1390 *chip; int res; diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c index bd56a033bfd0..bb8cc05605ac 100644 --- a/drivers/rtc/rtc-pxa.c +++ b/drivers/rtc/rtc-pxa.c @@ -485,7 +485,7 @@ static void __exit pxa_rtc_exit(void) module_init(pxa_rtc_init); module_exit(pxa_rtc_exit); -MODULE_AUTHOR("Robert Jarzmik"); +MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>"); MODULE_DESCRIPTION("PXA27x/PXA3xx Realtime Clock Driver (RTC)"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:pxa-rtc"); diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index bd5914994142..08c23a921012 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -57,6 +57,8 @@ static void dasd_device_tasklet(struct dasd_device *); static void dasd_block_tasklet(struct dasd_block *); static void do_kick_device(struct work_struct *); static void dasd_return_cqr_cb(struct dasd_ccw_req *, void *); +static void dasd_device_timeout(unsigned long); +static void dasd_block_timeout(unsigned long); /* * SECTION: Operations on the device structure. @@ -99,6 +101,8 @@ struct dasd_device *dasd_alloc_device(void) (unsigned long) device); INIT_LIST_HEAD(&device->ccw_queue); init_timer(&device->timer); + device->timer.function = dasd_device_timeout; + device->timer.data = (unsigned long) device; INIT_WORK(&device->kick_work, do_kick_device); device->state = DASD_STATE_NEW; device->target = DASD_STATE_NEW; @@ -138,6 +142,8 @@ struct dasd_block *dasd_alloc_block(void) INIT_LIST_HEAD(&block->ccw_queue); spin_lock_init(&block->queue_lock); init_timer(&block->timer); + block->timer.function = dasd_block_timeout; + block->timer.data = (unsigned long) block; return block; } @@ -915,19 +921,10 @@ static void dasd_device_timeout(unsigned long ptr) */ void dasd_device_set_timer(struct dasd_device *device, int expires) { - if (expires == 0) { - if (timer_pending(&device->timer)) - del_timer(&device->timer); - return; - } - if (timer_pending(&device->timer)) { - if (mod_timer(&device->timer, jiffies + expires)) - return; - } - device->timer.function = dasd_device_timeout; - device->timer.data = (unsigned long) device; - device->timer.expires = jiffies + expires; - add_timer(&device->timer); + if (expires == 0) + del_timer(&device->timer); + else + mod_timer(&device->timer, jiffies + expires); } /* @@ -935,8 +932,7 @@ void dasd_device_set_timer(struct dasd_device *device, int expires) */ void dasd_device_clear_timer(struct dasd_device *device) { - if (timer_pending(&device->timer)) - del_timer(&device->timer); + del_timer(&device->timer); } static void dasd_handle_killed_request(struct ccw_device *cdev, @@ -1586,19 +1582,10 @@ static void dasd_block_timeout(unsigned long ptr) */ void dasd_block_set_timer(struct dasd_block *block, int expires) { - if (expires == 0) { - if (timer_pending(&block->timer)) - del_timer(&block->timer); - return; - } - if (timer_pending(&block->timer)) { - if (mod_timer(&block->timer, jiffies + expires)) - return; - } - block->timer.function = dasd_block_timeout; - block->timer.data = (unsigned long) block; - block->timer.expires = jiffies + expires; - add_timer(&block->timer); + if (expires == 0) + del_timer(&block->timer); + else + mod_timer(&block->timer, jiffies + expires); } /* @@ -1606,8 +1593,7 @@ void dasd_block_set_timer(struct dasd_block *block, int expires) */ void dasd_block_clear_timer(struct dasd_block *block) { - if (timer_pending(&block->timer)) - del_timer(&block->timer); + del_timer(&block->timer); } /* diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c index 300e28a531f8..34339902efb9 100644 --- a/drivers/s390/block/dasd_devmap.c +++ b/drivers/s390/block/dasd_devmap.c @@ -677,7 +677,7 @@ static ssize_t dasd_ff_show(struct device *dev, struct device_attribute *attr, struct dasd_devmap *devmap; int ff_flag; - devmap = dasd_find_busid(dev->bus_id); + devmap = dasd_find_busid(dev_name(dev)); if (!IS_ERR(devmap)) ff_flag = (devmap->features & DASD_FEATURE_FAILFAST) != 0; else diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index 91ef669d98f6..a1a511bdec8c 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -1322,7 +1322,9 @@ static int ibmvfc_map_sg_data(struct scsi_cmnd *scmd, &evt->ext_list_token); if (!evt->ext_list) { - scmd_printk(KERN_ERR, scmd, "Can't allocate memory for scatterlist\n"); + scsi_dma_unmap(scmd); + if (vhost->log_level > IBMVFC_DEFAULT_LOG_LEVEL) + scmd_printk(KERN_ERR, scmd, "Can't allocate memory for scatterlist\n"); return -ENOMEM; } } diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 7225b6e2029e..257c24115de9 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1981,6 +1981,7 @@ void iscsi_pool_free(struct iscsi_pool *q) kfree(q->pool[i]); if (q->pool) kfree(q->pool); + kfree(q->queue); } EXPORT_SYMBOL_GPL(iscsi_pool_free); diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index c7acef50d5da..33a3c13fd893 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1016,6 +1016,9 @@ qla2x00_dev_loss_tmo_callbk(struct fc_rport *rport) struct Scsi_Host *host = rport_to_shost(rport); fc_port_t *fcport = *(fc_port_t **)rport->dd_data; + if (!fcport) + return; + qla2x00_abort_fcport_cmds(fcport); /* @@ -1033,6 +1036,9 @@ qla2x00_terminate_rport_io(struct fc_rport *rport) { fc_port_t *fcport = *(fc_port_t **)rport->dd_data; + if (!fcport) + return; + /* * At this point all fcport's software-states are cleared. Perform any * final cleanup of firmware resources (PCBs and XCBs). diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index ba4913353752..a336b4bc81a7 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -34,6 +34,7 @@ extern void qla24xx_update_fw_options(scsi_qla_host_t *); extern void qla81xx_update_fw_options(scsi_qla_host_t *); extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *); extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *); +extern int qla81xx_load_risc(scsi_qla_host_t *, uint32_t *); extern int qla2x00_loop_resync(scsi_qla_host_t *); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 9ad4d0968e5c..f6368a1d3021 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3562,6 +3562,9 @@ qla24xx_reset_adapter(scsi_qla_host_t *vha) WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE); RD_REG_DWORD(®->hccr); spin_unlock_irqrestore(&ha->hardware_lock, flags); + + if (IS_NOPOLLING_TYPE(ha)) + ha->isp_ops->enable_intrs(ha); } /* On sparc systems, obtain port and node WWN from firmware @@ -3847,6 +3850,10 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr) uint32_t i; struct qla_hw_data *ha = vha->hw; struct req_que *req = ha->req_q_map[0]; + + qla_printk(KERN_INFO, ha, + "FW: Loading from flash (%x)...\n", ha->flt_region_fw); + rval = QLA_SUCCESS; segments = FA_RISC_CODE_SEGMENTS; @@ -4022,8 +4029,8 @@ fail_fw_integrity: return QLA_FUNCTION_FAILED; } -int -qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +static int +qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr) { int rval; int segments, fragment; @@ -4043,12 +4050,12 @@ qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) qla_printk(KERN_ERR, ha, "Firmware images can be retrieved " "from: " QLA_FW_URL ".\n"); - /* Try to load RISC code from flash. */ - qla_printk(KERN_ERR, ha, "Attempting to load (potentially " - "outdated) firmware from flash.\n"); - return qla24xx_load_risc_flash(vha, srisc_addr); + return QLA_FUNCTION_FAILED; } + qla_printk(KERN_INFO, ha, + "FW: Loading via request-firmware...\n"); + rval = QLA_SUCCESS; segments = FA_RISC_CODE_SEGMENTS; @@ -4133,6 +4140,40 @@ fail_fw_integrity: return QLA_FUNCTION_FAILED; } +int +qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +{ + int rval; + + /* + * FW Load priority: + * 1) Firmware via request-firmware interface (.bin file). + * 2) Firmware residing in flash. + */ + rval = qla24xx_load_risc_blob(vha, srisc_addr); + if (rval == QLA_SUCCESS) + return rval; + + return qla24xx_load_risc_flash(vha, srisc_addr); +} + +int +qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +{ + int rval; + + /* + * FW Load priority: + * 1) Firmware residing in flash. + * 2) Firmware via request-firmware interface (.bin file). + */ + rval = qla24xx_load_risc_flash(vha, srisc_addr); + if (rval == QLA_SUCCESS) + return rval; + + return qla24xx_load_risc_blob(vha, srisc_addr); +} + void qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha) { diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 789fc576f222..e28ad81baf1e 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1868,6 +1868,7 @@ qla24xx_disable_msix(struct qla_hw_data *ha) static int qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp) { +#define MIN_MSIX_COUNT 2 int i, ret; struct msix_entry *entries; struct qla_msix_entry *qentry; @@ -1883,12 +1884,16 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp) ret = pci_enable_msix(ha->pdev, entries, ha->msix_count); if (ret) { + if (ret < MIN_MSIX_COUNT) + goto msix_failed; + qla_printk(KERN_WARNING, ha, "MSI-X: Failed to enable support -- %d/%d\n" " Retry with %d vectors\n", ha->msix_count, ret, ret); ha->msix_count = ret; ret = pci_enable_msix(ha->pdev, entries, ha->msix_count); if (ret) { +msix_failed: qla_printk(KERN_WARNING, ha, "MSI-X: Failed to enable" " support, giving up -- %d/%d\n", ha->msix_count, ret); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index db4df45234a5..f94ffbb98e95 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -58,14 +58,11 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) * seconds. This is to serialize actual issuing of mailbox cmds during * non ISP abort time. */ - if (!abort_active) { - if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, - mcp->tov * HZ)) { - /* Timeout occurred. Return error. */ - DEBUG2_3_11(printk("%s(%ld): cmd access timeout. " - "Exiting.\n", __func__, base_vha->host_no)); - return QLA_FUNCTION_TIMEOUT; - } + if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, mcp->tov * HZ)) { + /* Timeout occurred. Return error. */ + DEBUG2_3_11(printk("%s(%ld): cmd access timeout. " + "Exiting.\n", __func__, base_vha->host_no)); + return QLA_FUNCTION_TIMEOUT; } ha->flags.mbox_busy = 1; @@ -265,8 +262,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) } /* Allow next mbx cmd to come in. */ - if (!abort_active) - complete(&ha->mbx_cmd_comp); + complete(&ha->mbx_cmd_comp); if (rval) { DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, " diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index cf32653fe01a..c11f872d3e10 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -65,8 +65,6 @@ MODULE_PARM_DESC(ql2xextended_error_logging, static void qla2x00_free_device(scsi_qla_host_t *); -static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha); - int ql2xfdmienable=1; module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xfdmienable, @@ -800,6 +798,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) if (ha->isp_ops->abort_command(vha, sp, req)) { DEBUG2(printk("%s(%ld): abort_command " "mbx failed.\n", __func__, vha->host_no)); + ret = FAILED; } else { DEBUG3(printk("%s(%ld): abort_command " "mbx success.\n", __func__, vha->host_no)); @@ -1241,9 +1240,8 @@ qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type) * supported addressing method. */ static void -qla2x00_config_dma_addressing(scsi_qla_host_t *vha) +qla2x00_config_dma_addressing(struct qla_hw_data *ha) { - struct qla_hw_data *ha = vha->hw; /* Assume a 32bit DMA mask. */ ha->flags.enable_64bit_addressing = 0; @@ -1480,7 +1478,7 @@ static struct isp_operations qla81xx_isp_ops = { .reset_adapter = qla24xx_reset_adapter, .nvram_config = qla81xx_nvram_config, .update_fw_options = qla81xx_update_fw_options, - .load_risc = qla24xx_load_risc, + .load_risc = qla81xx_load_risc, .pci_info_str = qla24xx_pci_info_str, .fw_version_str = qla24xx_fw_version_str, .intr_handler = qla24xx_intr_handler, @@ -1869,6 +1867,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) set_bit(0, (unsigned long *) ha->vp_idx_map); + qla2x00_config_dma_addressing(ha); ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp); if (!ret) { qla_printk(KERN_WARNING, ha, @@ -1888,13 +1887,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) "[ERROR] Failed to allocate memory for scsi_host\n"); ret = -ENOMEM; + qla2x00_mem_free(ha); + qla2x00_free_que(ha, req, rsp); goto probe_hw_failed; } pci_set_drvdata(pdev, base_vha); - qla2x00_config_dma_addressing(base_vha); - host = base_vha->host; base_vha->req_ques[0] = req->id; host->can_queue = req->length + 128; @@ -1917,14 +1916,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* Set up the irqs */ ret = qla2x00_request_irqs(ha, rsp); if (ret) - goto probe_failed; - + goto probe_init_failed; /* Alloc arrays of request and response ring ptrs */ if (!qla2x00_alloc_queues(ha)) { qla_printk(KERN_WARNING, ha, "[ERROR] Failed to allocate memory for queue" " pointers\n"); - goto probe_failed; + goto probe_init_failed; } ha->rsp_q_map[0] = rsp; ha->req_q_map[0] = req; @@ -1997,6 +1995,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) return 0; +probe_init_failed: + qla2x00_free_que(ha, req, rsp); + ha->max_queues = 0; + probe_failed: qla2x00_free_device(base_vha); diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 303f8ee11f25..9c3b694c049d 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -944,9 +944,9 @@ qla24xx_unprotect_flash(struct qla_hw_data *ha) if (!ha->fdt_wrt_disable) return; - /* Disable flash write-protection. */ + /* Disable flash write-protection, first clear SR protection bit */ qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0); - /* Some flash parts need an additional zero-write to clear bits.*/ + /* Then write zero again to clear remaining SR bits.*/ qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0); } @@ -980,12 +980,11 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, uint32_t dwords) { int ret; - uint32_t liter, miter; + uint32_t liter; uint32_t sec_mask, rest_addr; - uint32_t fdata, findex; + uint32_t fdata; dma_addr_t optrom_dma; void *optrom = NULL; - uint32_t *s, *d; struct qla_hw_data *ha = vha->hw; ret = QLA_SUCCESS; @@ -1003,17 +1002,15 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, } rest_addr = (ha->fdt_block_size >> 2) - 1; - sec_mask = (ha->optrom_size >> 2) - (ha->fdt_block_size >> 2); + sec_mask = ~rest_addr; qla24xx_unprotect_flash(ha); for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) { - - findex = faddr; - fdata = (findex & sec_mask) << 2; + fdata = (faddr & sec_mask) << 2; /* Are we at the beginning of a sector? */ - if ((findex & rest_addr) == 0) { + if ((faddr & rest_addr) == 0) { /* Do sector unprotect. */ if (ha->fdt_unprotect_sec_cmd) qla24xx_write_flash_dword(ha, @@ -1024,7 +1021,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, (fdata & 0xff00) |((fdata << 16) & 0xff0000) | ((fdata >> 16) & 0xff)); if (ret != QLA_SUCCESS) { - DEBUG9(qla_printk("Unable to flash sector: " + DEBUG9(qla_printk("Unable to erase sector: " "address=%x.\n", faddr)); break; } @@ -1033,9 +1030,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, /* Go with burst-write. */ if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) { /* Copy data to DMA'ble buffer. */ - for (miter = 0, s = optrom, d = dwptr; - miter < OPTROM_BURST_DWORDS; miter++, s++, d++) - *s = cpu_to_le32(*d); + memcpy(optrom, dwptr, OPTROM_BURST_SIZE); ret = qla2x00_load_ram(vha, optrom_dma, flash_data_addr(ha, faddr), diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 808bab6ef06b..cfa4c11a4797 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.00-k1" +#define QLA2XXX_VERSION "8.03.00-k2" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index d6be0762eb91..b586f27c3bd4 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -244,6 +244,7 @@ struct ddb_entry { uint8_t ip_addr[ISCSI_IPADDR_SIZE]; uint8_t iscsi_name[ISCSI_NAME_SIZE]; /* 72 x48 */ uint8_t iscsi_alias[0x20]; + uint8_t isid[6]; }; /* diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 109c5f5985ec..af8c3233e8ae 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -342,8 +342,12 @@ static struct ddb_entry* qla4xxx_get_ddb_entry(struct scsi_qla_host *ha, DEBUG2(printk("scsi%ld: %s: Looking for ddb[%d]\n", ha->host_no, __func__, fw_ddb_index)); list_for_each_entry(ddb_entry, &ha->ddb_list, list) { - if (memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name, - ISCSI_NAME_SIZE) == 0) { + if ((memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name, + ISCSI_NAME_SIZE) == 0) && + (ddb_entry->tpgt == + le32_to_cpu(fw_ddb_entry->tgt_portal_grp)) && + (memcmp(ddb_entry->isid, fw_ddb_entry->isid, + sizeof(ddb_entry->isid)) == 0)) { found++; break; } @@ -430,6 +434,8 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha, ddb_entry->port = le16_to_cpu(fw_ddb_entry->port); ddb_entry->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp); + memcpy(ddb_entry->isid, fw_ddb_entry->isid, sizeof(ddb_entry->isid)); + memcpy(&ddb_entry->iscsi_name[0], &fw_ddb_entry->iscsi_name[0], min(sizeof(ddb_entry->iscsi_name), sizeof(fw_ddb_entry->iscsi_name))); diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 2a3671233b15..536d8e510f66 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -806,6 +806,8 @@ pci_default_setup(struct serial_private *priv, #define PCI_SUBDEVICE_ID_OCTPRO422 0x0208 #define PCI_SUBDEVICE_ID_POCTAL232 0x0308 #define PCI_SUBDEVICE_ID_POCTAL422 0x0408 +#define PCI_VENDOR_ID_ADVANTECH 0x13fe +#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 @@ -2152,6 +2154,10 @@ static int pciserial_resume_one(struct pci_dev *dev) #endif static struct pci_device_id serial_pci_tbl[] = { + /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */ + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, + PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, + pbn_b2_8_921600 }, { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, PCI_SUBVENDOR_ID_CONNECT_TECH, PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 3e525e38a5d9..7d7f576da202 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -982,7 +982,7 @@ config SERIAL_SH_SCI_CONSOLE config SERIAL_PNX8XXX bool "Enable PNX8XXX SoCs' UART Support" - depends on MIPS && SOC_PNX8550 + depends on MIPS && (SOC_PNX8550 || SOC_PNX833X) select SERIAL_CORE help If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index 338cf8a08b43..92187e28608a 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -180,7 +180,7 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) return rc; } -static void jsm_remove_one(struct pci_dev *pdev) +static void __devexit jsm_remove_one(struct pci_dev *pdev) { struct jsm_board *brd = pci_get_drvdata(pdev); int i = 0; diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index 3547558d2caf..324c74d2f666 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -161,6 +161,11 @@ static void jsm_tty_stop_rx(struct uart_port *port) channel->ch_bd->bd_ops->disable_receiver(channel); } +static void jsm_tty_enable_ms(struct uart_port *port) +{ + /* Nothing needed */ +} + static void jsm_tty_break(struct uart_port *port, int break_state) { unsigned long lock_flags; @@ -345,6 +350,7 @@ static struct uart_ops jsm_ops = { .start_tx = jsm_tty_start_tx, .send_xchar = jsm_tty_send_xchar, .stop_rx = jsm_tty_stop_rx, + .enable_ms = jsm_tty_enable_ms, .break_ctl = jsm_tty_break, .startup = jsm_tty_open, .shutdown = jsm_tty_close, diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c index b2001c5b145c..56841fe5f483 100644 --- a/drivers/serial/mcf.c +++ b/drivers/serial/mcf.c @@ -212,10 +212,18 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, { unsigned long flags; unsigned int baud, baudclk; +#if defined(CONFIG_M5272) + unsigned int baudfr; +#endif unsigned char mr1, mr2; baud = uart_get_baud_rate(port, termios, old, 0, 230400); +#if defined(CONFIG_M5272) + baudclk = (MCF_BUSCLK / baud) / 32; + baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16; +#else baudclk = ((MCF_BUSCLK / baud) + 16) / 32; +#endif mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR; mr2 = 0; @@ -262,6 +270,9 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, writeb(mr2, port->membase + MCFUART_UMR); writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1); writeb((baudclk & 0xff), port->membase + MCFUART_UBG2); +#if defined(CONFIG_M5272) + writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD); +#endif writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER, port->membase + MCFUART_UCSR); writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, diff --git a/drivers/staging/agnx/agnx.h b/drivers/staging/agnx/agnx.h index a75b0db3726c..20f36da62475 100644 --- a/drivers/staging/agnx/agnx.h +++ b/drivers/staging/agnx/agnx.h @@ -1,6 +1,8 @@ #ifndef AGNX_H_ #define AGNX_H_ +#include <linux/io.h> + #include "xmit.h" #define PFX KBUILD_MODNAME ": " diff --git a/drivers/staging/altpciechdma/altpciechdma.c b/drivers/staging/altpciechdma/altpciechdma.c index 8e2b4ca0651d..f516140ca976 100644 --- a/drivers/staging/altpciechdma/altpciechdma.c +++ b/drivers/staging/altpciechdma/altpciechdma.c @@ -531,7 +531,7 @@ static int __devinit dma_test(struct ape_dev *ape, struct pci_dev *dev) goto fail; /* allocate and map coherently-cached memory for a DMA-able buffer */ - /* @see 2.6.26.2/Documentation/DMA-mapping.txt line 318 */ + /* @see Documentation/PCI/PCI-DMA-mapping.txt, near line 318 */ buffer_virt = (u8 *)pci_alloc_consistent(dev, PAGE_SIZE * 4, &buffer_bus); if (!buffer_virt) { printk(KERN_DEBUG "Could not allocate coherent DMA buffer.\n"); @@ -846,7 +846,7 @@ static int __devinit probe(struct pci_dev *dev, const struct pci_device_id *id) #if 1 // @todo For now, disable 64-bit, because I do not understand the implications (DAC!) /* query for DMA transfer */ - /* @see Documentation/DMA-mapping.txt */ + /* @see Documentation/PCI/PCI-DMA-mapping.txt */ if (!pci_set_dma_mask(dev, DMA_64BIT_MASK)) { pci_set_consistent_dma_mask(dev, DMA_64BIT_MASK); /* use 64-bit DMA */ diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig index 6b996db0dd6a..604bd1e0d546 100644 --- a/drivers/staging/android/Kconfig +++ b/drivers/staging/android/Kconfig @@ -27,6 +27,7 @@ menuconfig ANDROID_RAM_CONSOLE_ERROR_CORRECTION bool "Android RAM Console Enable error correction" default n depends on ANDROID_RAM_CONSOLE + depends on !ANDROID_RAM_CONSOLE_EARLY_INIT select REED_SOLOMON select REED_SOLOMON_ENC8 select REED_SOLOMON_DEC8 diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index 6a4ceacb33f5..758131cad08a 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -319,6 +319,7 @@ int task_get_unused_fd_flags(struct task_struct *tsk, int flags) int fd, error; struct fdtable *fdt; unsigned long rlim_cur; + unsigned long irqs; if (files == NULL) return -ESRCH; @@ -335,12 +336,11 @@ repeat: * N.B. For clone tasks sharing a files structure, this test * will limit the total number of files that can be opened. */ - rcu_read_lock(); - if (tsk->signal) + rlim_cur = 0; + if (lock_task_sighand(tsk, &irqs)) { rlim_cur = tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur; - else - rlim_cur = 0; - rcu_read_unlock(); + unlock_task_sighand(tsk, &irqs); + } if (fd >= rlim_cur) goto out; @@ -2649,14 +2649,14 @@ static void binder_vma_open(struct vm_area_struct *vma) { struct binder_proc *proc = vma->vm_private_data; if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE) - printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot); + printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot)); dump_stack(); } static void binder_vma_close(struct vm_area_struct *vma) { struct binder_proc *proc = vma->vm_private_data; if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE) - printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot); + printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot)); proc->vma = NULL; } @@ -2677,7 +2677,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) vma->vm_end = vma->vm_start + SZ_4M; if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE) - printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot); + printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot)); if (vma->vm_flags & FORBIDDEN_MMAP_FLAGS) { ret = -EPERM; diff --git a/drivers/staging/android/lowmemorykiller.txt b/drivers/staging/android/lowmemorykiller.txt new file mode 100644 index 000000000000..bd5c0c028968 --- /dev/null +++ b/drivers/staging/android/lowmemorykiller.txt @@ -0,0 +1,16 @@ +The lowmemorykiller driver lets user-space specify a set of memory thresholds +where processes with a range of oom_adj values will get killed. Specify the +minimum oom_adj values in /sys/module/lowmemorykiller/parameters/adj and the +number of free pages in /sys/module/lowmemorykiller/parameters/minfree. Both +files take a comma separated list of numbers in ascending order. + +For example, write "0,8" to /sys/module/lowmemorykiller/parameters/adj and +"1024,4096" to /sys/module/lowmemorykiller/parameters/minfree to kill processes +with a oom_adj value of 8 or higher when the free memory drops below 4096 pages +and kill processes with a oom_adj value of 0 or higher when the free memory +drops below 1024 pages. + +The driver considers memory used for caches to be free, but if a large +percentage of the cached memory is locked this can be very inaccurate +and processes may not get killed until the normal oom killer is triggered. + diff --git a/drivers/staging/android/ram_console.c b/drivers/staging/android/ram_console.c index bf006857a87a..643ac5ce381d 100644 --- a/drivers/staging/android/ram_console.c +++ b/drivers/staging/android/ram_console.c @@ -224,9 +224,23 @@ static int __init ram_console_init(struct ram_console_buffer *buffer, ram_console_buffer_size = buffer_size - sizeof(struct ram_console_buffer); + if (ram_console_buffer_size > buffer_size) { + pr_err("ram_console: buffer %p, invalid size %d, datasize %d\n", + buffer, buffer_size, ram_console_buffer_size); + return 0; + } + #ifdef CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION ram_console_buffer_size -= (DIV_ROUND_UP(ram_console_buffer_size, ECC_BLOCK_SIZE) + 1) * ECC_SIZE; + + if (ram_console_buffer_size > buffer_size) { + pr_err("ram_console: buffer %p, invalid size %d, " + "non-ecc datasize %d\n", + buffer, buffer_size, ram_console_buffer_size); + return 0; + } + ram_console_par_buffer = buffer->data + ram_console_buffer_size; diff --git a/drivers/staging/android/timed_gpio.c b/drivers/staging/android/timed_gpio.c index bea68c9fc942..33daff0481d2 100644 --- a/drivers/staging/android/timed_gpio.c +++ b/drivers/staging/android/timed_gpio.c @@ -18,7 +18,7 @@ #include <linux/platform_device.h> #include <linux/hrtimer.h> #include <linux/err.h> -#include <asm/arch/gpio.h> +#include <linux/gpio.h> #include "timed_gpio.h" @@ -49,7 +49,8 @@ static ssize_t gpio_enable_show(struct device *dev, struct device_attribute *att if (hrtimer_active(&gpio_data->timer)) { ktime_t r = hrtimer_get_remaining(&gpio_data->timer); - remaining = r.tv.sec * 1000 + r.tv.nsec / 1000000; + struct timeval t = ktime_to_timeval(r); + remaining = t.tv_sec * 1000 + t.tv_usec / 1000; } else remaining = 0; diff --git a/drivers/staging/at76_usb/Kconfig b/drivers/staging/at76_usb/Kconfig index 4c0e55e15448..8606f9621624 100644 --- a/drivers/staging/at76_usb/Kconfig +++ b/drivers/staging/at76_usb/Kconfig @@ -1,6 +1,6 @@ config USB_ATMEL tristate "Atmel at76c503/at76c505/at76c505a USB cards" - depends on MAC80211 && WLAN_80211 && USB + depends on WLAN_80211 && USB default N select FW_LOADER ---help--- diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c index 185533e54769..c8e4d31c7df2 100644 --- a/drivers/staging/at76_usb/at76_usb.c +++ b/drivers/staging/at76_usb/at76_usb.c @@ -6,7 +6,6 @@ * Copyright (c) 2004 Nick Jones * Copyright (c) 2004 Balint Seeber <n0_5p4m_p13453@hotmail.com> * Copyright (c) 2007 Guido Guenther <agx@sigxcpu.org> - * Copyright (c) 2007 Kalle Valo <kalle.valo@iki.fi> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -17,13 +16,6 @@ * Atmel AT76C503A/505/505A. * * Some iw_handler code was taken from airo.c, (C) 1999 Benjamin Reed - * - * TODO for the mac80211 port: - * o adhoc support - * o RTS/CTS support - * o Power Save Mode support - * o support for short/long preambles - * o export variables through debugfs/sysfs */ #include <linux/init.h> @@ -44,7 +36,7 @@ #include <net/ieee80211_radiotap.h> #include <linux/firmware.h> #include <linux/leds.h> -#include <net/mac80211.h> +#include <net/ieee80211.h> #include "at76_usb.h" @@ -84,43 +76,31 @@ #define DBG_WE_EVENTS 0x08000000 /* dump wireless events */ #define DBG_FW 0x10000000 /* firmware download */ #define DBG_DFU 0x20000000 /* device firmware upgrade */ -#define DBG_CMD 0x40000000 -#define DBG_MAC80211 0x80000000 #define DBG_DEFAULTS 0 /* Use our own dbg macro */ #define at76_dbg(bits, format, arg...) \ -do { \ - if (at76_debug & (bits)) \ - printk(KERN_DEBUG DRIVER_NAME ": " format "\n" , ## arg); \ -} while (0) - -#define at76_dbg_dump(bits, buf, len, format, arg...) \ -do { \ - if (at76_debug & (bits)) { \ + do { \ + if (at76_debug & (bits)) \ printk(KERN_DEBUG DRIVER_NAME ": " format "\n" , ## arg); \ - print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); \ - } \ -} while (0) + } while (0) static int at76_debug = DBG_DEFAULTS; -#define FIRMWARE_IS_WPA(ver) ((ver.major == 1) && (ver.minor == 103)) - /* Protect against concurrent firmware loading and parsing */ static struct mutex fw_mutex; static struct fwentry firmwares[] = { - [0] = { "" }, - [BOARD_503_ISL3861] = { "atmel_at76c503-i3861.bin" }, - [BOARD_503_ISL3863] = { "atmel_at76c503-i3863.bin" }, - [BOARD_503] = { "atmel_at76c503-rfmd.bin" }, - [BOARD_503_ACC] = { "atmel_at76c503-rfmd-acc.bin" }, - [BOARD_505] = { "atmel_at76c505-rfmd.bin" }, - [BOARD_505_2958] = { "atmel_at76c505-rfmd2958.bin" }, - [BOARD_505A] = { "atmel_at76c505a-rfmd2958.bin" }, - [BOARD_505AMX] = { "atmel_at76c505amx-rfmd.bin" }, + [0] = {""}, + [BOARD_503_ISL3861] = {"atmel_at76c503-i3861.bin"}, + [BOARD_503_ISL3863] = {"atmel_at76c503-i3863.bin"}, + [BOARD_503] = {"atmel_at76c503-rfmd.bin"}, + [BOARD_503_ACC] = {"atmel_at76c503-rfmd-acc.bin"}, + [BOARD_505] = {"atmel_at76c505-rfmd.bin"}, + [BOARD_505_2958] = {"atmel_at76c505-rfmd2958.bin"}, + [BOARD_505A] = {"atmel_at76c505a-rfmd2958.bin"}, + [BOARD_505AMX] = {"atmel_at76c505amx-rfmd.bin"}, }; #define USB_DEVICE_DATA(__ops) .driver_info = (kernel_ulong_t)(__ops) @@ -130,133 +110,135 @@ static struct usb_device_id dev_table[] = { * at76c503-i3861 */ /* Generic AT76C503/3861 device */ - { USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Linksys WUSB11 v2.1/v2.6 */ - { USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Netgear MA101 rev. A */ - { USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Tekram U300C / Allnet ALL0193 */ - { USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* HP HN210W J7801A */ - { USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Sitecom/Z-Com/Zyxel M4Y-750 */ - { USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Dynalink/Askey WLL013 (intersil) */ - { USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* EZ connect 11Mpbs Wireless USB Adapter SMC2662W v1 */ - { USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* BenQ AWL300 */ - { USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Addtron AWU-120, Compex WLU11 */ - { USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Intel AP310 AnyPoint II USB */ - { USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Dynalink L11U */ - { USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Arescom WL-210, FCC id 07J-GL2411USB */ - { USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* I-O DATA WN-B11/USB */ - { USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* BT Voyager 1010 */ - { USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* * at76c503-i3863 */ /* Generic AT76C503/3863 device */ - { USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863) }, + {USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863)}, /* Samsung SWL-2100U */ - { USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863) }, + {USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863)}, /* * at76c503-rfmd */ /* Generic AT76C503/RFMD device */ - { USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503)}, /* Dynalink/Askey WLL013 (rfmd) */ - { USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503)}, /* Linksys WUSB11 v2.6 */ - { USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503)}, /* Network Everywhere NWU11B */ - { USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503)}, /* Netgear MA101 rev. B */ - { USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503)}, /* D-Link DWL-120 rev. E */ - { USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503)}, /* Actiontec 802UAT1, HWU01150-01UK */ - { USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503)}, /* AirVast W-Buddie WN210 */ - { USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503)}, /* Dick Smith Electronics XH1153 802.11b USB adapter */ - { USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503)}, /* CNet CNUSB611 */ - { USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503)}, /* FiberLine FL-WL200U */ - { USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503)}, /* BenQ AWL400 USB stick */ - { USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503)}, /* 3Com 3CRSHEW696 */ - { USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503)}, /* Siemens Santis ADSL WLAN USB adapter WLL 013 */ - { USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503)}, /* Belkin F5D6050, version 2 */ - { USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503)}, /* iBlitzz, BWU613 (not *B or *SB) */ - { USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503)}, /* Gigabyte GN-WLBM101 */ - { USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503)}, /* Planex GW-US11S */ - { USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503)}, /* Internal WLAN adapter in h5[4,5]xx series iPAQs */ - { USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503)}, /* Corega Wireless LAN USB-11 mini */ - { USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503)}, /* Corega Wireless LAN USB-11 mini2 */ - { USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503)}, /* Uniden PCW100 */ - { USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503)}, /* * at76c503-rfmd-acc */ /* SMC2664W */ - { USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC) }, + {USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC)}, /* Belkin F5D6050, SMC2662W v2, SMC2662W-AR */ - { USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC) }, + {USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC)}, /* * at76c505-rfmd */ /* Generic AT76C505/RFMD */ - { USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505) }, + {USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505)}, /* * at76c505-rfmd2958 */ /* Generic AT76C505/RFMD, OvisLink WL-1130USB */ - { USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958)}, /* Fiberline FL-WL240U */ - { USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958)}, /* CNet CNUSB-611G */ - { USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958)}, /* Linksys WUSB11 v2.8 */ - { USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958)}, /* Xterasys XN-2122B, IBlitzz BWU613B/BWU613SB */ - { USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958)}, /* Corega WLAN USB Stick 11 */ - { USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958)}, /* Microstar MSI Box MS6978 */ - { USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958)}, /* * at76c505a-rfmd2958 */ /* Generic AT76C505A device */ - { USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A) }, + {USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A)}, /* Generic AT76C505AS device */ - { USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A) }, + {USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A)}, /* Siemens Gigaset USB WLAN Adapter 11 */ - { USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A) }, + {USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A)}, + /* OQO Model 01+ Internal Wi-Fi */ + {USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A)}, /* * at76c505amx-rfmd */ /* Generic AT76C505AMX device */ - { USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX) }, - { } + {USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX)}, + {} }; MODULE_DEVICE_TABLE(usb, dev_table); @@ -264,8 +246,26 @@ MODULE_DEVICE_TABLE(usb, dev_table); /* Supported rates of this hardware, bit 7 marks basic rates */ static const u8 hw_rates[] = { 0x82, 0x84, 0x0b, 0x16 }; +/* Frequency of each channel in MHz */ +static const long channel_frequency[] = { + 2412, 2417, 2422, 2427, 2432, 2437, 2442, + 2447, 2452, 2457, 2462, 2467, 2472, 2484 +}; + +#define NUM_CHANNELS ARRAY_SIZE(channel_frequency) + static const char *const preambles[] = { "long", "short", "auto" }; +static const char *const mac_states[] = { + [MAC_INIT] = "INIT", + [MAC_SCANNING] = "SCANNING", + [MAC_AUTH] = "AUTH", + [MAC_ASSOC] = "ASSOC", + [MAC_JOINING] = "JOINING", + [MAC_CONNECTED] = "CONNECTED", + [MAC_OWN_IBSS] = "OWN_IBSS" +}; + /* Firmware download */ /* DFU states */ #define STATE_IDLE 0x00 @@ -300,30 +300,17 @@ struct dfu_status { static inline int at76_is_intersil(enum board_type board) { - if (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863) - return 1; - return 0; + return (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863); } static inline int at76_is_503rfmd(enum board_type board) { - if (board == BOARD_503 || board == BOARD_503_ACC) - return 1; - return 0; -} - -static inline int at76_is_505(enum board_type board) -{ - if (board == BOARD_505 || board == BOARD_505_2958) - return 1; - return 0; + return (board == BOARD_503 || board == BOARD_503_ACC); } static inline int at76_is_505a(enum board_type board) { - if (board == BOARD_505A || board == BOARD_505AMX) - return 1; - return 0; + return (board == BOARD_505A || board == BOARD_505AMX); } /* Load a block of the first (internal) part of the firmware */ @@ -504,6 +491,41 @@ exit: return ret; } +/* Report that the scan results are ready */ +static inline void at76_iwevent_scan_complete(struct net_device *netdev) +{ + union iwreq_data wrqu; + wrqu.data.length = 0; + wrqu.data.flags = 0; + wireless_send_event(netdev, SIOCGIWSCAN, &wrqu, NULL); + at76_dbg(DBG_WE_EVENTS, "%s: SIOCGIWSCAN sent", netdev->name); +} + +static inline void at76_iwevent_bss_connect(struct net_device *netdev, + u8 *bssid) +{ + union iwreq_data wrqu; + wrqu.data.length = 0; + wrqu.data.flags = 0; + memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN); + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL); + at76_dbg(DBG_WE_EVENTS, "%s: %s: SIOCGIWAP sent", netdev->name, + __func__); +} + +static inline void at76_iwevent_bss_disconnect(struct net_device *netdev) +{ + union iwreq_data wrqu; + wrqu.data.length = 0; + wrqu.data.flags = 0; + memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN); + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL); + at76_dbg(DBG_WE_EVENTS, "%s: %s: SIOCGIWAP sent", netdev->name, + __func__); +} + #define HEX2STR_BUFFERS 4 #define HEX2STR_MAX_LEN 64 #define BIN2HEX(x) ((x) < 10 ? '0' + (x) : (x) + 'A' - 10) @@ -575,6 +597,37 @@ static void at76_ledtrig_tx_activity(void) mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4); } +/* Check if the given ssid is hidden */ +static inline int at76_is_hidden_ssid(u8 *ssid, int length) +{ + static const u8 zeros[32]; + + if (length == 0) + return 1; + + if (length == 1 && ssid[0] == ' ') + return 1; + + return (memcmp(ssid, zeros, length) == 0); +} + +static inline void at76_free_bss_list(struct at76_priv *priv) +{ + struct list_head *next, *ptr; + unsigned long flags; + + spin_lock_irqsave(&priv->bss_list_spinlock, flags); + + priv->curr_bss = NULL; + + list_for_each_safe(ptr, next, &priv->bss_list) { + list_del(ptr); + kfree(list_entry(ptr, struct bss_info, list)); + } + + spin_unlock_irqrestore(&priv->bss_list_spinlock, flags); +} + static int at76_remap(struct usb_device *udev) { int ret; @@ -598,7 +651,7 @@ static int at76_get_op_mode(struct usb_device *udev) return -ENOMEM; ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33, USB_TYPE_VENDOR | USB_DIR_IN | - USB_RECIP_INTERFACE, 0x01, 0, &op_mode, 1, + USB_RECIP_INTERFACE, 0x01, 0, op_mode, 1, USB_CTRL_GET_TIMEOUT); saved = *op_mode; kfree(op_mode); @@ -676,7 +729,7 @@ exit: kfree(hwcfg); if (ret < 0) printk(KERN_ERR "%s: cannot get HW Config (error %d)\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); return ret; } @@ -685,15 +738,15 @@ static struct reg_domain const *at76_get_reg_domain(u16 code) { int i; static struct reg_domain const fd_tab[] = { - { 0x10, "FCC (USA)", 0x7ff }, /* ch 1-11 */ - { 0x20, "IC (Canada)", 0x7ff }, /* ch 1-11 */ - { 0x30, "ETSI (most of Europe)", 0x1fff }, /* ch 1-13 */ - { 0x31, "Spain", 0x600 }, /* ch 10-11 */ - { 0x32, "France", 0x1e00 }, /* ch 10-13 */ - { 0x40, "MKK (Japan)", 0x2000 }, /* ch 14 */ - { 0x41, "MKK1 (Japan)", 0x3fff }, /* ch 1-14 */ - { 0x50, "Israel", 0x3fc }, /* ch 3-9 */ - { 0x00, "<unknown>", 0xffffffff } /* ch 1-32 */ + {0x10, "FCC (USA)", 0x7ff}, /* ch 1-11 */ + {0x20, "IC (Canada)", 0x7ff}, /* ch 1-11 */ + {0x30, "ETSI (most of Europe)", 0x1fff}, /* ch 1-13 */ + {0x31, "Spain", 0x600}, /* ch 10-11 */ + {0x32, "France", 0x1e00}, /* ch 10-13 */ + {0x40, "MKK (Japan)", 0x2000}, /* ch 14 */ + {0x41, "MKK1 (Japan)", 0x3fff}, /* ch 1-14 */ + {0x50, "Israel", 0x3fc}, /* ch 3-9 */ + {0x00, "<unknown>", 0xffffffff} /* ch 1-32 */ }; /* Last entry is fallback for unknown domain code */ @@ -731,7 +784,7 @@ static inline int at76_get_cmd_status(struct usb_device *udev, u8 cmd) ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x22, USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_INTERFACE, cmd, 0, stat_buf, - sizeof(stat_buf), USB_CTRL_GET_TIMEOUT); + 40, USB_CTRL_GET_TIMEOUT); if (ret >= 0) ret = stat_buf[5]; kfree(stat_buf); @@ -739,24 +792,6 @@ static inline int at76_get_cmd_status(struct usb_device *udev, u8 cmd) return ret; } -#define MAKE_CMD_CASE(c) case (c): return #c - -static const char *at76_get_cmd_string(u8 cmd_status) -{ - switch (cmd_status) { - MAKE_CMD_CASE(CMD_SET_MIB); - MAKE_CMD_CASE(CMD_GET_MIB); - MAKE_CMD_CASE(CMD_SCAN); - MAKE_CMD_CASE(CMD_JOIN); - MAKE_CMD_CASE(CMD_START_IBSS); - MAKE_CMD_CASE(CMD_RADIO_ON); - MAKE_CMD_CASE(CMD_RADIO_OFF); - MAKE_CMD_CASE(CMD_STARTUP); - } - - return "UNKNOWN"; -} - static int at76_set_card_command(struct usb_device *udev, u8 cmd, void *buf, int buf_size) { @@ -772,10 +807,6 @@ static int at76_set_card_command(struct usb_device *udev, u8 cmd, void *buf, cmd_buf->size = cpu_to_le16(buf_size); memcpy(cmd_buf->data, buf, buf_size); - at76_dbg_dump(DBG_CMD, cmd_buf, sizeof(struct at76_command) + buf_size, - "issuing command %s (0x%02x)", - at76_get_cmd_string(cmd), cmd); - ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e, USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE, 0, 0, cmd_buf, @@ -813,13 +844,13 @@ static int at76_wait_completion(struct at76_priv *priv, int cmd) status = at76_get_cmd_status(priv->udev, cmd); if (status < 0) { printk(KERN_ERR "%s: at76_get_cmd_status failed: %d\n", - wiphy_name(priv->hw->wiphy), status); + priv->netdev->name, status); break; } at76_dbg(DBG_WAIT_COMPLETE, "%s: Waiting on cmd %d, status = %d (%s)", - wiphy_name(priv->hw->wiphy), cmd, status, + priv->netdev->name, cmd, status, at76_get_cmd_status_string(status)); if (status != CMD_STATUS_IN_PROGRESS @@ -830,7 +861,7 @@ static int at76_wait_completion(struct at76_priv *priv, int cmd) if (time_after(jiffies, timeout)) { printk(KERN_ERR "%s: completion timeout for command %d\n", - wiphy_name(priv->hw->wiphy), cmd); + priv->netdev->name, cmd); status = -ETIMEDOUT; break; } @@ -853,7 +884,7 @@ static int at76_set_mib(struct at76_priv *priv, struct set_mib_buffer *buf) if (ret != CMD_STATUS_COMPLETE) { printk(KERN_INFO "%s: set_mib: at76_wait_completion failed " - "with %d\n", wiphy_name(priv->hw->wiphy), ret); + "with %d\n", priv->netdev->name, ret); ret = -EIO; } @@ -874,7 +905,7 @@ static int at76_set_radio(struct at76_priv *priv, int enable) ret = at76_set_card_command(priv->udev, cmd, NULL, 0); if (ret < 0) printk(KERN_ERR "%s: at76_set_card_command(%d) failed: %d\n", - wiphy_name(priv->hw->wiphy), cmd, ret); + priv->netdev->name, cmd, ret); else ret = 1; @@ -895,7 +926,44 @@ static int at76_set_pm_mode(struct at76_priv *priv) ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) printk(KERN_ERR "%s: set_mib (pm_mode) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); + + return ret; +} + +/* Set the association id for power save mode */ +static int at76_set_associd(struct at76_priv *priv, u16 id) +{ + int ret = 0; + + priv->mib_buf.type = MIB_MAC_MGMT; + priv->mib_buf.size = 2; + priv->mib_buf.index = offsetof(struct mib_mac_mgmt, station_id); + priv->mib_buf.data.word = cpu_to_le16(id); + + ret = at76_set_mib(priv, &priv->mib_buf); + if (ret < 0) + printk(KERN_ERR "%s: set_mib (associd) failed: %d\n", + priv->netdev->name, ret); + + return ret; +} + +/* Set the listen interval for power save mode */ +static int at76_set_listen_interval(struct at76_priv *priv, u16 interval) +{ + int ret = 0; + + priv->mib_buf.type = MIB_MAC; + priv->mib_buf.size = 2; + priv->mib_buf.index = offsetof(struct mib_mac, listen_interval); + priv->mib_buf.data.word = cpu_to_le16(interval); + + ret = at76_set_mib(priv, &priv->mib_buf); + if (ret < 0) + printk(KERN_ERR + "%s: set_mib (listen_interval) failed: %d\n", + priv->netdev->name, ret); return ret; } @@ -912,7 +980,7 @@ static int at76_set_preamble(struct at76_priv *priv, u8 type) ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) printk(KERN_ERR "%s: set_mib (preamble) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); return ret; } @@ -929,7 +997,7 @@ static int at76_set_frag(struct at76_priv *priv, u16 size) ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) printk(KERN_ERR "%s: set_mib (frag threshold) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); return ret; } @@ -946,7 +1014,7 @@ static int at76_set_rts(struct at76_priv *priv, u16 size) ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) printk(KERN_ERR "%s: set_mib (rts) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); return ret; } @@ -963,41 +1031,24 @@ static int at76_set_autorate_fallback(struct at76_priv *priv, int onoff) ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) printk(KERN_ERR "%s: set_mib (autorate fallback) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); return ret; } -static int at76_set_tkip_bssid(struct at76_priv *priv, const void *addr) +static int at76_add_mac_address(struct at76_priv *priv, void *addr) { int ret = 0; - priv->mib_buf.type = MIB_MAC_ENCRYPTION; + priv->mib_buf.type = MIB_MAC_ADDR; priv->mib_buf.size = ETH_ALEN; - priv->mib_buf.index = offsetof(struct mib_mac_encryption, tkip_bssid); + priv->mib_buf.index = offsetof(struct mib_mac_addr, mac_addr); memcpy(priv->mib_buf.data.addr, addr, ETH_ALEN); ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) - printk(KERN_ERR "%s: set_mib (MAC_ENCRYPTION, tkip_bssid) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); - - return ret; -} - -static int at76_reset_rsc(struct at76_priv *priv) -{ - int ret = 0; - - priv->mib_buf.type = MIB_MAC_ENCRYPTION; - priv->mib_buf.size = 4 * 8; - priv->mib_buf.index = offsetof(struct mib_mac_encryption, key_rsc); - memset(priv->mib_buf.data.data, 0 , priv->mib_buf.size); - - ret = at76_set_mib(priv, &priv->mib_buf); - if (ret < 0) - printk(KERN_ERR "%s: set_mib (MAC_ENCRYPTION, key_rsc) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + printk(KERN_ERR "%s: set_mib (MAC_ADDR, mac_addr) failed: %d\n", + priv->netdev->name, ret); return ret; } @@ -1016,16 +1067,16 @@ static void at76_dump_mib_mac_addr(struct at76_priv *priv) sizeof(struct mib_mac_addr)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (MAC_ADDR) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %s res 0x%x 0x%x", - wiphy_name(priv->hw->wiphy), + priv->netdev->name, mac2str(m->mac_addr), m->res[0], m->res[1]); for (i = 0; i < ARRAY_SIZE(m->group_addr); i++) at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %s, " - "status %d", wiphy_name(priv->hw->wiphy), i, + "status %d", priv->netdev->name, i, mac2str(m->group_addr[i]), m->group_addr_status[i]); exit: kfree(m); @@ -1045,13 +1096,13 @@ static void at76_dump_mib_mac_wep(struct at76_priv *priv) sizeof(struct mib_mac_wep)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (MAC_WEP) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: priv_invoked %u def_key_id %u " "key_len %u excl_unencr %u wep_icv_err %u wep_excluded %u " - "encr_level %u key %d", wiphy_name(priv->hw->wiphy), + "encr_level %u key %d", priv->netdev->name, m->privacy_invoked, m->wep_default_key_id, m->wep_key_mapping_len, m->exclude_unencrypted, le32_to_cpu(m->wep_icv_error_count), @@ -1063,55 +1114,12 @@ static void at76_dump_mib_mac_wep(struct at76_priv *priv) for (i = 0; i < WEP_KEYS; i++) at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: key %d: %s", - wiphy_name(priv->hw->wiphy), i, + priv->netdev->name, i, hex2str(m->wep_default_keyvalue[i], key_len)); exit: kfree(m); } -static void at76_dump_mib_mac_encryption(struct at76_priv *priv) -{ - int i; - int ret; - /*int key_len;*/ - struct mib_mac_encryption *m; - - m = kmalloc(sizeof(struct mib_mac_encryption), GFP_KERNEL); - if (!m) - return; - - ret = at76_get_mib(priv->udev, MIB_MAC_ENCRYPTION, m, - sizeof(struct mib_mac_encryption)); - if (ret < 0) { - dev_err(&priv->udev->dev, - "%s: at76_get_mib (MAC_ENCRYPTION) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); - goto exit; - } - - at76_dbg(DBG_MIB, - "%s: MIB MAC_ENCRYPTION: tkip_bssid %s priv_invoked %u " - "ciph_key_id %u grp_key_id %u excl_unencr %u " - "ckip_key_perm %u wep_icv_err %u wep_excluded %u", - wiphy_name(priv->hw->wiphy), mac2str(m->tkip_bssid), - m->privacy_invoked, m->cipher_default_key_id, - m->cipher_default_group_key_id, m->exclude_unencrypted, - m->ckip_key_permutation, - le32_to_cpu(m->wep_icv_error_count), - le32_to_cpu(m->wep_excluded_count)); - - /*key_len = (m->encryption_level == 1) ? - WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN;*/ - - for (i = 0; i < CIPHER_KEYS; i++) - at76_dbg(DBG_MIB, "%s: MIB MAC_ENCRYPTION: key %d: %s", - wiphy_name(priv->hw->wiphy), i, - hex2str(m->cipher_default_keyvalue[i], - CIPHER_KEY_LEN)); -exit: - kfree(m); -} - static void at76_dump_mib_mac_mgmt(struct at76_priv *priv) { int ret; @@ -1125,7 +1133,7 @@ static void at76_dump_mib_mac_mgmt(struct at76_priv *priv) sizeof(struct mib_mac_mgmt)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (MAC_MGMT) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } @@ -1136,7 +1144,7 @@ static void at76_dump_mib_mac_mgmt(struct at76_priv *priv) "pm_mode %d ibss_change %d res %d " "multi_domain_capability_implemented %d " "international_roaming %d country_string %.3s", - wiphy_name(priv->hw->wiphy), le16_to_cpu(m->beacon_period), + priv->netdev->name, le16_to_cpu(m->beacon_period), le16_to_cpu(m->CFP_max_duration), le16_to_cpu(m->medium_occupancy_limit), le16_to_cpu(m->station_id), le16_to_cpu(m->ATIM_window), @@ -1161,7 +1169,7 @@ static void at76_dump_mib_mac(struct at76_priv *priv) ret = at76_get_mib(priv->udev, MIB_MAC, m, sizeof(struct mib_mac)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (MAC) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } @@ -1171,8 +1179,7 @@ static void at76_dump_mib_mac(struct at76_priv *priv) "scan_type %d scan_channel %d probe_delay %u " "min_channel_time %d max_channel_time %d listen_int %d " "desired_ssid %s desired_bssid %s desired_bsstype %d", - wiphy_name(priv->hw->wiphy), - le32_to_cpu(m->max_tx_msdu_lifetime), + priv->netdev->name, le32_to_cpu(m->max_tx_msdu_lifetime), le32_to_cpu(m->max_rx_lifetime), le16_to_cpu(m->frag_threshold), le16_to_cpu(m->rts_threshold), le16_to_cpu(m->cwmin), le16_to_cpu(m->cwmax), @@ -1198,7 +1205,7 @@ static void at76_dump_mib_phy(struct at76_priv *priv) ret = at76_get_mib(priv->udev, MIB_PHY, m, sizeof(struct mib_phy)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (PHY) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } @@ -1207,7 +1214,7 @@ static void at76_dump_mib_phy(struct at76_priv *priv) "mpdu_max_length %d cca_mode_supported %d operation_rate_set " "0x%x 0x%x 0x%x 0x%x channel_id %d current_cca_mode %d " "phy_type %d current_reg_domain %d", - wiphy_name(priv->hw->wiphy), le32_to_cpu(m->ed_threshold), + priv->netdev->name, le32_to_cpu(m->ed_threshold), le16_to_cpu(m->slot_time), le16_to_cpu(m->sifs_time), le16_to_cpu(m->preamble_length), le16_to_cpu(m->plcp_header_length), @@ -1231,14 +1238,13 @@ static void at76_dump_mib_local(struct at76_priv *priv) ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(struct mib_local)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (LOCAL) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } at76_dbg(DBG_MIB, "%s: MIB LOCAL: beacon_enable %d " "txautorate_fallback %d ssid_size %d promiscuous_mode %d " - "preamble_type %d", wiphy_name(priv->hw->wiphy), - m->beacon_enable, + "preamble_type %d", priv->netdev->name, m->beacon_enable, m->txautorate_fallback, m->ssid_size, m->promiscuous_mode, m->preamble_type); exit: @@ -1257,21 +1263,118 @@ static void at76_dump_mib_mdomain(struct at76_priv *priv) sizeof(struct mib_mdomain)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (MDOMAIN) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: channel_list %s", - wiphy_name(priv->hw->wiphy), + priv->netdev->name, hex2str(m->channel_list, sizeof(m->channel_list))); at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: tx_powerlevel %s", - wiphy_name(priv->hw->wiphy), + priv->netdev->name, hex2str(m->tx_powerlevel, sizeof(m->tx_powerlevel))); exit: kfree(m); } +static int at76_get_current_bssid(struct at76_priv *priv) +{ + int ret = 0; + struct mib_mac_mgmt *mac_mgmt = + kmalloc(sizeof(struct mib_mac_mgmt), GFP_KERNEL); + + if (!mac_mgmt) { + ret = -ENOMEM; + goto exit; + } + + ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, mac_mgmt, + sizeof(struct mib_mac_mgmt)); + if (ret < 0) { + printk(KERN_ERR "%s: at76_get_mib failed: %d\n", + priv->netdev->name, ret); + goto error; + } + memcpy(priv->bssid, mac_mgmt->current_bssid, ETH_ALEN); + printk(KERN_INFO "%s: using BSSID %s\n", priv->netdev->name, + mac2str(priv->bssid)); +error: + kfree(mac_mgmt); +exit: + return ret; +} + +static int at76_get_current_channel(struct at76_priv *priv) +{ + int ret = 0; + struct mib_phy *phy = kmalloc(sizeof(struct mib_phy), GFP_KERNEL); + + if (!phy) { + ret = -ENOMEM; + goto exit; + } + ret = at76_get_mib(priv->udev, MIB_PHY, phy, sizeof(struct mib_phy)); + if (ret < 0) { + printk(KERN_ERR "%s: at76_get_mib(MIB_PHY) failed: %d\n", + priv->netdev->name, ret); + goto error; + } + priv->channel = phy->channel_id; +error: + kfree(phy); +exit: + return ret; +} + +/** + * at76_start_scan - start a scan + * + * @use_essid - use the configured ESSID in non passive mode + */ +static int at76_start_scan(struct at76_priv *priv, int use_essid) +{ + struct at76_req_scan scan; + + memset(&scan, 0, sizeof(struct at76_req_scan)); + memset(scan.bssid, 0xff, ETH_ALEN); + + if (use_essid) { + memcpy(scan.essid, priv->essid, IW_ESSID_MAX_SIZE); + scan.essid_size = priv->essid_size; + } else + scan.essid_size = 0; + + /* jal: why should we start at a certain channel? we do scan the whole + range allowed by reg domain. */ + scan.channel = priv->channel; + + /* atmelwlandriver differs between scan type 0 and 1 (active/passive) + For ad-hoc mode, it uses type 0 only. */ + scan.scan_type = priv->scan_mode; + + /* INFO: For probe_delay, not multiplying by 1024 as this will be + slightly less than min_channel_time + (per spec: probe delay < min. channel time) */ + scan.min_channel_time = cpu_to_le16(priv->scan_min_time); + scan.max_channel_time = cpu_to_le16(priv->scan_max_time); + scan.probe_delay = cpu_to_le16(priv->scan_min_time * 1000); + scan.international_scan = 0; + + /* other values are set to 0 for type 0 */ + + at76_dbg(DBG_PROGRESS, "%s: start_scan (use_essid = %d, intl = %d, " + "channel = %d, probe_delay = %d, scan_min_time = %d, " + "scan_max_time = %d)", + priv->netdev->name, use_essid, + scan.international_scan, scan.channel, + le16_to_cpu(scan.probe_delay), + le16_to_cpu(scan.min_channel_time), + le16_to_cpu(scan.max_channel_time)); + + return at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan)); +} + /* Enable monitor mode */ static int at76_start_monitor(struct at76_priv *priv) { @@ -1292,6 +1395,86 @@ static int at76_start_monitor(struct at76_priv *priv) return ret; } +static int at76_start_ibss(struct at76_priv *priv) +{ + struct at76_req_ibss bss; + int ret; + + WARN_ON(priv->mac_state != MAC_OWN_IBSS); + if (priv->mac_state != MAC_OWN_IBSS) + return -EBUSY; + + memset(&bss, 0, sizeof(struct at76_req_ibss)); + memset(bss.bssid, 0xff, ETH_ALEN); + memcpy(bss.essid, priv->essid, IW_ESSID_MAX_SIZE); + bss.essid_size = priv->essid_size; + bss.bss_type = ADHOC_MODE; + bss.channel = priv->channel; + + ret = at76_set_card_command(priv->udev, CMD_START_IBSS, &bss, + sizeof(struct at76_req_ibss)); + if (ret < 0) { + printk(KERN_ERR "%s: start_ibss failed: %d\n", + priv->netdev->name, ret); + return ret; + } + + ret = at76_wait_completion(priv, CMD_START_IBSS); + if (ret != CMD_STATUS_COMPLETE) { + printk(KERN_ERR "%s: start_ibss failed to complete, %d\n", + priv->netdev->name, ret); + return ret; + } + + ret = at76_get_current_bssid(priv); + if (ret < 0) + return ret; + + ret = at76_get_current_channel(priv); + if (ret < 0) + return ret; + + /* not sure what this is good for ??? */ + priv->mib_buf.type = MIB_MAC_MGMT; + priv->mib_buf.size = 1; + priv->mib_buf.index = offsetof(struct mib_mac_mgmt, ibss_change); + priv->mib_buf.data.byte = 0; + + ret = at76_set_mib(priv, &priv->mib_buf); + if (ret < 0) { + printk(KERN_ERR "%s: set_mib (ibss change ok) failed: %d\n", + priv->netdev->name, ret); + return ret; + } + + netif_carrier_on(priv->netdev); + netif_start_queue(priv->netdev); + return 0; +} + +/* Request card to join BSS in managed or ad-hoc mode */ +static int at76_join_bss(struct at76_priv *priv, struct bss_info *ptr) +{ + struct at76_req_join join; + + BUG_ON(!ptr); + + memset(&join, 0, sizeof(struct at76_req_join)); + memcpy(join.bssid, ptr->bssid, ETH_ALEN); + memcpy(join.essid, ptr->ssid, ptr->ssid_len); + join.essid_size = ptr->ssid_len; + join.bss_type = (priv->iw_mode == IW_MODE_ADHOC ? 1 : 2); + join.channel = ptr->channel; + join.timeout = cpu_to_le16(2000); + + at76_dbg(DBG_PROGRESS, + "%s join addr %s ssid %s type %d ch %d timeout %d", + priv->netdev->name, mac2str(join.bssid), join.essid, + join.bss_type, join.channel, le16_to_cpu(join.timeout)); + return at76_set_card_command(priv->udev, CMD_JOIN, &join, + sizeof(struct at76_req_join)); +} + /* Calculate padding from txbuf->wlength (which excludes the USB TX header), likely to compensate a flaw in the AT76C503A USB part ... */ static inline int at76_calc_padding(int wlen) @@ -1310,6 +1493,14 @@ static inline int at76_calc_padding(int wlen) return 0; } +/* We are doing a lot of things here in an interrupt. Need + a bh handler (Watching TV with a TV card is probably + a good test: if you see flickers, we are doing too much. + Currently I do see flickers... even with our tasklet :-( ) + Maybe because the bttv driver and usb-uhci use the same interrupt +*/ +/* Or maybe because our BH handler is preempting bttv's BH handler.. BHs don't + * solve everything.. (alex) */ static void at76_rx_callback(struct urb *urb) { struct at76_priv *priv = urb->context; @@ -1319,6 +1510,1758 @@ static void at76_rx_callback(struct urb *urb) return; } +static void at76_tx_callback(struct urb *urb) +{ + struct at76_priv *priv = urb->context; + struct net_device_stats *stats = &priv->stats; + unsigned long flags; + struct at76_tx_buffer *mgmt_buf; + int ret; + + switch (urb->status) { + case 0: + stats->tx_packets++; + break; + case -ENOENT: + case -ECONNRESET: + /* urb has been unlinked */ + return; + default: + at76_dbg(DBG_URB, "%s - nonzero tx status received: %d", + __func__, urb->status); + stats->tx_errors++; + break; + } + + spin_lock_irqsave(&priv->mgmt_spinlock, flags); + mgmt_buf = priv->next_mgmt_bulk; + priv->next_mgmt_bulk = NULL; + spin_unlock_irqrestore(&priv->mgmt_spinlock, flags); + + if (!mgmt_buf) { + netif_wake_queue(priv->netdev); + return; + } + + /* we don't copy the padding bytes, but add them + to the length */ + memcpy(priv->bulk_out_buffer, mgmt_buf, + le16_to_cpu(mgmt_buf->wlength) + AT76_TX_HDRLEN); + usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, + priv->bulk_out_buffer, + le16_to_cpu(mgmt_buf->wlength) + mgmt_buf->padding + + AT76_TX_HDRLEN, at76_tx_callback, priv); + ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC); + if (ret) + printk(KERN_ERR "%s: error in tx submit urb: %d\n", + priv->netdev->name, ret); + + kfree(mgmt_buf); +} + +/* Send a management frame on bulk-out. txbuf->wlength must be set */ +static int at76_tx_mgmt(struct at76_priv *priv, struct at76_tx_buffer *txbuf) +{ + unsigned long flags; + int ret; + int urb_status; + void *oldbuf = NULL; + + netif_carrier_off(priv->netdev); /* stop netdev watchdog */ + netif_stop_queue(priv->netdev); /* stop tx data packets */ + + spin_lock_irqsave(&priv->mgmt_spinlock, flags); + + urb_status = priv->tx_urb->status; + if (urb_status == -EINPROGRESS) { + /* cannot transmit now, put in the queue */ + oldbuf = priv->next_mgmt_bulk; + priv->next_mgmt_bulk = txbuf; + } + spin_unlock_irqrestore(&priv->mgmt_spinlock, flags); + + if (oldbuf) { + /* a data/mgmt tx is already pending in the URB - + if this is no error in some situations we must + implement a queue or silently modify the old msg */ + printk(KERN_ERR "%s: removed pending mgmt buffer %s\n", + priv->netdev->name, hex2str(oldbuf, 64)); + kfree(oldbuf); + return 0; + } + + txbuf->tx_rate = TX_RATE_1MBIT; + txbuf->padding = at76_calc_padding(le16_to_cpu(txbuf->wlength)); + memset(txbuf->reserved, 0, sizeof(txbuf->reserved)); + + if (priv->next_mgmt_bulk) + printk(KERN_ERR "%s: URB status %d, but mgmt is pending\n", + priv->netdev->name, urb_status); + + at76_dbg(DBG_TX_MGMT, + "%s: tx mgmt: wlen %d tx_rate %d pad %d %s", + priv->netdev->name, le16_to_cpu(txbuf->wlength), + txbuf->tx_rate, txbuf->padding, + hex2str(txbuf->packet, le16_to_cpu(txbuf->wlength))); + + /* txbuf was not consumed above -> send mgmt msg immediately */ + memcpy(priv->bulk_out_buffer, txbuf, + le16_to_cpu(txbuf->wlength) + AT76_TX_HDRLEN); + usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, + priv->bulk_out_buffer, + le16_to_cpu(txbuf->wlength) + txbuf->padding + + AT76_TX_HDRLEN, at76_tx_callback, priv); + ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC); + if (ret) + printk(KERN_ERR "%s: error in tx submit urb: %d\n", + priv->netdev->name, ret); + + kfree(txbuf); + + return ret; +} + +/* Go to the next information element */ +static inline void next_ie(struct ieee80211_info_element **ie) +{ + *ie = (struct ieee80211_info_element *)(&(*ie)->data[(*ie)->len]); +} + +/* Challenge is the challenge string (in TLV format) + we got with seq_nr 2 for shared secret authentication only and + send in seq_nr 3 WEP encrypted to prove we have the correct WEP key; + otherwise it is NULL */ +static int at76_auth_req(struct at76_priv *priv, struct bss_info *bss, + int seq_nr, struct ieee80211_info_element *challenge) +{ + struct at76_tx_buffer *tx_buffer; + struct ieee80211_hdr_3addr *mgmt; + struct ieee80211_auth *req; + int buf_len = (seq_nr != 3 ? AUTH_FRAME_SIZE : + AUTH_FRAME_SIZE + 1 + 1 + challenge->len); + + BUG_ON(!bss); + BUG_ON(seq_nr == 3 && !challenge); + tx_buffer = kmalloc(buf_len + MAX_PADDING_SIZE, GFP_ATOMIC); + if (!tx_buffer) + return -ENOMEM; + + req = (struct ieee80211_auth *)tx_buffer->packet; + mgmt = &req->header; + + /* make wireless header */ + /* first auth msg is not encrypted, only the second (seq_nr == 3) */ + mgmt->frame_ctl = + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH | + (seq_nr == 3 ? IEEE80211_FCTL_PROTECTED : 0)); + + mgmt->duration_id = cpu_to_le16(0x8000); + memcpy(mgmt->addr1, bss->bssid, ETH_ALEN); + memcpy(mgmt->addr2, priv->netdev->dev_addr, ETH_ALEN); + memcpy(mgmt->addr3, bss->bssid, ETH_ALEN); + mgmt->seq_ctl = cpu_to_le16(0); + + req->algorithm = cpu_to_le16(priv->auth_mode); + req->transaction = cpu_to_le16(seq_nr); + req->status = cpu_to_le16(0); + + if (seq_nr == 3) + memcpy(req->info_element, challenge, 1 + 1 + challenge->len); + + /* init. at76_priv tx header */ + tx_buffer->wlength = cpu_to_le16(buf_len - AT76_TX_HDRLEN); + at76_dbg(DBG_TX_MGMT, "%s: AuthReq bssid %s alg %d seq_nr %d", + priv->netdev->name, mac2str(mgmt->addr3), + le16_to_cpu(req->algorithm), le16_to_cpu(req->transaction)); + if (seq_nr == 3) + at76_dbg(DBG_TX_MGMT, "%s: AuthReq challenge: %s ...", + priv->netdev->name, hex2str(req->info_element, 18)); + + /* either send immediately (if no data tx is pending + or put it in pending list */ + return at76_tx_mgmt(priv, tx_buffer); +} + +static int at76_assoc_req(struct at76_priv *priv, struct bss_info *bss) +{ + struct at76_tx_buffer *tx_buffer; + struct ieee80211_hdr_3addr *mgmt; + struct ieee80211_assoc_request *req; + struct ieee80211_info_element *ie; + char *essid; + int essid_len; + u16 capa; + + BUG_ON(!bss); + + tx_buffer = kmalloc(ASSOCREQ_MAX_SIZE + MAX_PADDING_SIZE, GFP_ATOMIC); + if (!tx_buffer) + return -ENOMEM; + + req = (struct ieee80211_assoc_request *)tx_buffer->packet; + mgmt = &req->header; + ie = req->info_element; + + /* make wireless header */ + mgmt->frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_ASSOC_REQ); + + mgmt->duration_id = cpu_to_le16(0x8000); + memcpy(mgmt->addr1, bss->bssid, ETH_ALEN); + memcpy(mgmt->addr2, priv->netdev->dev_addr, ETH_ALEN); + memcpy(mgmt->addr3, bss->bssid, ETH_ALEN); + mgmt->seq_ctl = cpu_to_le16(0); + + /* we must set the Privacy bit in the capabilities to assure an + Agere-based AP with optional WEP transmits encrypted frames + to us. AP only set the Privacy bit in their capabilities + if WEP is mandatory in the BSS! */ + capa = bss->capa; + if (priv->wep_enabled) + capa |= WLAN_CAPABILITY_PRIVACY; + if (priv->preamble_type != PREAMBLE_TYPE_LONG) + capa |= WLAN_CAPABILITY_SHORT_PREAMBLE; + req->capability = cpu_to_le16(capa); + + req->listen_interval = cpu_to_le16(2 * bss->beacon_interval); + + /* write TLV data elements */ + + ie->id = MFIE_TYPE_SSID; + ie->len = bss->ssid_len; + memcpy(ie->data, bss->ssid, bss->ssid_len); + next_ie(&ie); + + ie->id = MFIE_TYPE_RATES; + ie->len = sizeof(hw_rates); + memcpy(ie->data, hw_rates, sizeof(hw_rates)); + next_ie(&ie); /* ie points behind the supp_rates field */ + + /* init. at76_priv tx header */ + tx_buffer->wlength = cpu_to_le16((u8 *)ie - (u8 *)mgmt); + + ie = req->info_element; + essid = ie->data; + essid_len = min_t(int, IW_ESSID_MAX_SIZE, ie->len); + + next_ie(&ie); /* points to IE of rates now */ + at76_dbg(DBG_TX_MGMT, + "%s: AssocReq bssid %s capa 0x%04x ssid %.*s rates %s", + priv->netdev->name, mac2str(mgmt->addr3), + le16_to_cpu(req->capability), essid_len, essid, + hex2str(ie->data, ie->len)); + + /* either send immediately (if no data tx is pending + or put it in pending list */ + return at76_tx_mgmt(priv, tx_buffer); +} + +/* We got to check the bss_list for old entries */ +static void at76_bss_list_timeout(unsigned long par) +{ + struct at76_priv *priv = (struct at76_priv *)par; + unsigned long flags; + struct list_head *lptr, *nptr; + struct bss_info *ptr; + + spin_lock_irqsave(&priv->bss_list_spinlock, flags); + + list_for_each_safe(lptr, nptr, &priv->bss_list) { + + ptr = list_entry(lptr, struct bss_info, list); + + if (ptr != priv->curr_bss + && time_after(jiffies, ptr->last_rx + BSS_LIST_TIMEOUT)) { + at76_dbg(DBG_BSS_TABLE_RM, + "%s: bss_list: removing old BSS %s ch %d", + priv->netdev->name, mac2str(ptr->bssid), + ptr->channel); + list_del(&ptr->list); + kfree(ptr); + } + } + spin_unlock_irqrestore(&priv->bss_list_spinlock, flags); + /* restart the timer */ + mod_timer(&priv->bss_list_timer, jiffies + BSS_LIST_TIMEOUT); +} + +static inline void at76_set_mac_state(struct at76_priv *priv, + enum mac_state mac_state) +{ + at76_dbg(DBG_MAC_STATE, "%s state: %s", priv->netdev->name, + mac_states[mac_state]); + priv->mac_state = mac_state; +} + +static void at76_dump_bss_table(struct at76_priv *priv) +{ + struct bss_info *ptr; + unsigned long flags; + struct list_head *lptr; + + spin_lock_irqsave(&priv->bss_list_spinlock, flags); + + at76_dbg(DBG_BSS_TABLE, "%s BSS table (curr=%p):", priv->netdev->name, + priv->curr_bss); + + list_for_each(lptr, &priv->bss_list) { + ptr = list_entry(lptr, struct bss_info, list); + at76_dbg(DBG_BSS_TABLE, "0x%p: bssid %s channel %d ssid %.*s " + "(%s) capa 0x%04x rates %s rssi %d link %d noise %d", + ptr, mac2str(ptr->bssid), ptr->channel, ptr->ssid_len, + ptr->ssid, hex2str(ptr->ssid, ptr->ssid_len), + ptr->capa, hex2str(ptr->rates, ptr->rates_len), + ptr->rssi, ptr->link_qual, ptr->noise_level); + } + spin_unlock_irqrestore(&priv->bss_list_spinlock, flags); +} + +/* Called upon successful association to mark interface as connected */ +static void at76_work_assoc_done(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + work_assoc_done); + + mutex_lock(&priv->mtx); + + WARN_ON(priv->mac_state != MAC_ASSOC); + WARN_ON(!priv->curr_bss); + if (priv->mac_state != MAC_ASSOC || !priv->curr_bss) + goto exit; + + if (priv->iw_mode == IW_MODE_INFRA) { + if (priv->pm_mode != AT76_PM_OFF) { + /* calculate the listen interval in units of + beacon intervals of the curr_bss */ + u32 pm_period_beacon = (priv->pm_period >> 10) / + priv->curr_bss->beacon_interval; + + pm_period_beacon = max(pm_period_beacon, 2u); + pm_period_beacon = min(pm_period_beacon, 0xffffu); + + at76_dbg(DBG_PM, + "%s: pm_mode %d assoc id 0x%x listen int %d", + priv->netdev->name, priv->pm_mode, + priv->assoc_id, pm_period_beacon); + + at76_set_associd(priv, priv->assoc_id); + at76_set_listen_interval(priv, (u16)pm_period_beacon); + } + schedule_delayed_work(&priv->dwork_beacon, BEACON_TIMEOUT); + } + at76_set_pm_mode(priv); + + netif_carrier_on(priv->netdev); + netif_wake_queue(priv->netdev); + at76_set_mac_state(priv, MAC_CONNECTED); + at76_iwevent_bss_connect(priv->netdev, priv->curr_bss->bssid); + at76_dbg(DBG_PROGRESS, "%s: connected to BSSID %s", + priv->netdev->name, mac2str(priv->curr_bss->bssid)); + +exit: + mutex_unlock(&priv->mtx); +} + +/* We only store the new mac address in netdev struct, + it gets set when the netdev is opened. */ +static int at76_set_mac_address(struct net_device *netdev, void *addr) +{ + struct sockaddr *mac = addr; + memcpy(netdev->dev_addr, mac->sa_data, ETH_ALEN); + return 1; +} + +static struct net_device_stats *at76_get_stats(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + return &priv->stats; +} + +static struct iw_statistics *at76_get_wireless_stats(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, "RETURN qual %d level %d noise %d updated %d", + priv->wstats.qual.qual, priv->wstats.qual.level, + priv->wstats.qual.noise, priv->wstats.qual.updated); + + return &priv->wstats; +} + +static void at76_set_multicast(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + int promisc; + + promisc = ((netdev->flags & IFF_PROMISC) != 0); + if (promisc != priv->promisc) { + /* This gets called in interrupt, must reschedule */ + priv->promisc = promisc; + schedule_work(&priv->work_set_promisc); + } +} + +/* Stop all network activity, flush all pending tasks */ +static void at76_quiesce(struct at76_priv *priv) +{ + unsigned long flags; + + netif_stop_queue(priv->netdev); + netif_carrier_off(priv->netdev); + + at76_set_mac_state(priv, MAC_INIT); + + cancel_delayed_work(&priv->dwork_get_scan); + cancel_delayed_work(&priv->dwork_beacon); + cancel_delayed_work(&priv->dwork_auth); + cancel_delayed_work(&priv->dwork_assoc); + cancel_delayed_work(&priv->dwork_restart); + + spin_lock_irqsave(&priv->mgmt_spinlock, flags); + kfree(priv->next_mgmt_bulk); + priv->next_mgmt_bulk = NULL; + spin_unlock_irqrestore(&priv->mgmt_spinlock, flags); +} + +/******************************************************************************* + * at76_priv implementations of iw_handler functions: + */ +static int at76_iw_handler_commit(struct net_device *netdev, + struct iw_request_info *info, + void *null, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, "%s %s: restarting the device", netdev->name, + __func__); + + if (priv->mac_state != MAC_INIT) + at76_quiesce(priv); + + /* Wait half second before the restart to process subsequent + * requests from the same iwconfig in a single restart */ + schedule_delayed_work(&priv->dwork_restart, HZ / 2); + + return 0; +} + +static int at76_iw_handler_get_name(struct net_device *netdev, + struct iw_request_info *info, + char *name, char *extra) +{ + strcpy(name, "IEEE 802.11b"); + at76_dbg(DBG_IOCTL, "%s: SIOCGIWNAME - name %s", netdev->name, name); + return 0; +} + +static int at76_iw_handler_set_freq(struct net_device *netdev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int chan = -1; + int ret = -EIWCOMMIT; + at76_dbg(DBG_IOCTL, "%s: SIOCSIWFREQ - freq.m %d freq.e %d", + netdev->name, freq->m, freq->e); + + if ((freq->e == 0) && (freq->m <= 1000)) + /* Setting by channel number */ + chan = freq->m; + else { + /* Setting by frequency - search the table */ + int mult = 1; + int i; + + for (i = 0; i < (6 - freq->e); i++) + mult *= 10; + + for (i = 0; i < NUM_CHANNELS; i++) { + if (freq->m == (channel_frequency[i] * mult)) + chan = i + 1; + } + } + + if (chan < 1 || !priv->domain) + /* non-positive channels are invalid + * we need a domain info to set the channel + * either that or an invalid frequency was + * provided by the user */ + ret = -EINVAL; + else if (!(priv->domain->channel_map & (1 << (chan - 1)))) { + printk(KERN_INFO "%s: channel %d not allowed for domain %s\n", + priv->netdev->name, chan, priv->domain->name); + ret = -EINVAL; + } + + if (ret == -EIWCOMMIT) { + priv->channel = chan; + at76_dbg(DBG_IOCTL, "%s: SIOCSIWFREQ - ch %d", netdev->name, + chan); + } + + return ret; +} + +static int at76_iw_handler_get_freq(struct net_device *netdev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + freq->m = priv->channel; + freq->e = 0; + + if (priv->channel) + at76_dbg(DBG_IOCTL, "%s: SIOCGIWFREQ - freq %ld x 10e%d", + netdev->name, channel_frequency[priv->channel - 1], 6); + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWFREQ - ch %d", netdev->name, + priv->channel); + + return 0; +} + +static int at76_iw_handler_set_mode(struct net_device *netdev, + struct iw_request_info *info, + __u32 *mode, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWMODE - %d", netdev->name, *mode); + + if ((*mode != IW_MODE_ADHOC) && (*mode != IW_MODE_INFRA) && + (*mode != IW_MODE_MONITOR)) + return -EINVAL; + + priv->iw_mode = *mode; + if (priv->iw_mode != IW_MODE_INFRA) + priv->pm_mode = AT76_PM_OFF; + + return -EIWCOMMIT; +} + +static int at76_iw_handler_get_mode(struct net_device *netdev, + struct iw_request_info *info, + __u32 *mode, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + *mode = priv->iw_mode; + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWMODE - %d", netdev->name, *mode); + + return 0; +} + +static int at76_iw_handler_get_range(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + /* inspired by atmel.c */ + struct at76_priv *priv = netdev_priv(netdev); + struct iw_range *range = (struct iw_range *)extra; + int i; + + data->length = sizeof(struct iw_range); + memset(range, 0, sizeof(struct iw_range)); + + /* TODO: range->throughput = xxxxxx; */ + + range->min_nwid = 0x0000; + range->max_nwid = 0x0000; + + /* this driver doesn't maintain sensitivity information */ + range->sensitivity = 0; + + range->max_qual.qual = 100; + range->max_qual.level = 100; + range->max_qual.noise = 0; + range->max_qual.updated = IW_QUAL_NOISE_INVALID; + + range->avg_qual.qual = 50; + range->avg_qual.level = 50; + range->avg_qual.noise = 0; + range->avg_qual.updated = IW_QUAL_NOISE_INVALID; + + range->bitrate[0] = 1000000; + range->bitrate[1] = 2000000; + range->bitrate[2] = 5500000; + range->bitrate[3] = 11000000; + range->num_bitrates = 4; + + range->min_rts = 0; + range->max_rts = MAX_RTS_THRESHOLD; + + range->min_frag = MIN_FRAG_THRESHOLD; + range->max_frag = MAX_FRAG_THRESHOLD; + + range->pmp_flags = IW_POWER_PERIOD; + range->pmt_flags = IW_POWER_ON; + range->pm_capa = IW_POWER_PERIOD | IW_POWER_ALL_R; + + range->encoding_size[0] = WEP_SMALL_KEY_LEN; + range->encoding_size[1] = WEP_LARGE_KEY_LEN; + range->num_encoding_sizes = 2; + range->max_encoding_tokens = WEP_KEYS; + + /* both WL-240U and Linksys WUSB11 v2.6 specify 15 dBm as output power + - take this for all (ignore antenna gains) */ + range->txpower[0] = 15; + range->num_txpower = 1; + range->txpower_capa = IW_TXPOW_DBM; + + range->we_version_source = WIRELESS_EXT; + range->we_version_compiled = WIRELESS_EXT; + + /* same as the values used in atmel.c */ + range->retry_capa = IW_RETRY_LIMIT; + range->retry_flags = IW_RETRY_LIMIT; + range->r_time_flags = 0; + range->min_retry = 1; + range->max_retry = 255; + + range->num_channels = NUM_CHANNELS; + range->num_frequency = 0; + + for (i = 0; i < NUM_CHANNELS; i++) { + /* test if channel map bit is raised */ + if (priv->domain->channel_map & (0x1 << i)) { + range->num_frequency += 1; + + range->freq[i].i = i + 1; + range->freq[i].m = channel_frequency[i] * 100000; + range->freq[i].e = 1; /* freq * 10^1 */ + } + } + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWRANGE", netdev->name); + + return 0; +} + +static int at76_iw_handler_set_spy(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = 0; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWSPY - number of addresses %d", + netdev->name, data->length); + + spin_lock_bh(&priv->spy_spinlock); + ret = iw_handler_set_spy(priv->netdev, info, (union iwreq_data *)data, + extra); + spin_unlock_bh(&priv->spy_spinlock); + + return ret; +} + +static int at76_iw_handler_get_spy(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + + struct at76_priv *priv = netdev_priv(netdev); + int ret = 0; + + spin_lock_bh(&priv->spy_spinlock); + ret = iw_handler_get_spy(priv->netdev, info, + (union iwreq_data *)data, extra); + spin_unlock_bh(&priv->spy_spinlock); + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWSPY - number of addresses %d", + netdev->name, data->length); + + return ret; +} + +static int at76_iw_handler_set_thrspy(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWTHRSPY - number of addresses %d)", + netdev->name, data->length); + + spin_lock_bh(&priv->spy_spinlock); + ret = iw_handler_set_thrspy(netdev, info, (union iwreq_data *)data, + extra); + spin_unlock_bh(&priv->spy_spinlock); + + return ret; +} + +static int at76_iw_handler_get_thrspy(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret; + + spin_lock_bh(&priv->spy_spinlock); + ret = iw_handler_get_thrspy(netdev, info, (union iwreq_data *)data, + extra); + spin_unlock_bh(&priv->spy_spinlock); + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWTHRSPY - number of addresses %d)", + netdev->name, data->length); + + return ret; +} + +static int at76_iw_handler_set_wap(struct net_device *netdev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWAP - wap/bssid %s", netdev->name, + mac2str(ap_addr->sa_data)); + + /* if the incoming address == ff:ff:ff:ff:ff:ff, the user has + chosen any or auto AP preference */ + if (is_broadcast_ether_addr(ap_addr->sa_data) + || is_zero_ether_addr(ap_addr->sa_data)) + priv->wanted_bssid_valid = 0; + else { + /* user wants to set a preferred AP address */ + priv->wanted_bssid_valid = 1; + memcpy(priv->wanted_bssid, ap_addr->sa_data, ETH_ALEN); + } + + return -EIWCOMMIT; +} + +static int at76_iw_handler_get_wap(struct net_device *netdev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + ap_addr->sa_family = ARPHRD_ETHER; + memcpy(ap_addr->sa_data, priv->bssid, ETH_ALEN); + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWAP - wap/bssid %s", netdev->name, + mac2str(ap_addr->sa_data)); + + return 0; +} + +static int at76_iw_handler_set_scan(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = 0; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWSCAN", netdev->name); + + if (mutex_lock_interruptible(&priv->mtx)) + return -EINTR; + + if (!netif_running(netdev)) { + ret = -ENETDOWN; + goto exit; + } + + /* jal: we don't allow "iwlist ethX scan" while we are + in monitor mode */ + if (priv->iw_mode == IW_MODE_MONITOR) { + ret = -EBUSY; + goto exit; + } + + /* Discard old scan results */ + if ((jiffies - priv->last_scan) > (20 * HZ)) + priv->scan_state = SCAN_IDLE; + priv->last_scan = jiffies; + + /* Initiate a scan command */ + if (priv->scan_state == SCAN_IN_PROGRESS) { + ret = -EBUSY; + goto exit; + } + + priv->scan_state = SCAN_IN_PROGRESS; + + at76_quiesce(priv); + + /* Try to do passive or active scan if WE asks as. */ + if (wrqu->data.length + && wrqu->data.length == sizeof(struct iw_scan_req)) { + struct iw_scan_req *req = (struct iw_scan_req *)extra; + + if (req->scan_type == IW_SCAN_TYPE_PASSIVE) + priv->scan_mode = SCAN_TYPE_PASSIVE; + else if (req->scan_type == IW_SCAN_TYPE_ACTIVE) + priv->scan_mode = SCAN_TYPE_ACTIVE; + + /* Sanity check values? */ + if (req->min_channel_time > 0) + priv->scan_min_time = req->min_channel_time; + + if (req->max_channel_time > 0) + priv->scan_max_time = req->max_channel_time; + } + + /* change to scanning state */ + at76_set_mac_state(priv, MAC_SCANNING); + schedule_work(&priv->work_start_scan); + +exit: + mutex_unlock(&priv->mtx); + return ret; +} + +static int at76_iw_handler_get_scan(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + unsigned long flags; + struct list_head *lptr, *nptr; + struct bss_info *curr_bss; + struct iw_event *iwe = kmalloc(sizeof(struct iw_event), GFP_KERNEL); + char *curr_val, *curr_pos = extra; + int i; + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWSCAN", netdev->name); + + if (!iwe) + return -ENOMEM; + + if (priv->scan_state != SCAN_COMPLETED) { + /* scan not yet finished */ + kfree(iwe); + return -EAGAIN; + } + + spin_lock_irqsave(&priv->bss_list_spinlock, flags); + + list_for_each_safe(lptr, nptr, &priv->bss_list) { + curr_bss = list_entry(lptr, struct bss_info, list); + + iwe->cmd = SIOCGIWAP; + iwe->u.ap_addr.sa_family = ARPHRD_ETHER; + memcpy(iwe->u.ap_addr.sa_data, curr_bss->bssid, 6); + curr_pos = iwe_stream_add_event(info, curr_pos, + extra + IW_SCAN_MAX_DATA, iwe, + IW_EV_ADDR_LEN); + + iwe->u.data.length = curr_bss->ssid_len; + iwe->cmd = SIOCGIWESSID; + iwe->u.data.flags = 1; + + curr_pos = iwe_stream_add_point(info, curr_pos, + extra + IW_SCAN_MAX_DATA, iwe, + curr_bss->ssid); + + iwe->cmd = SIOCGIWMODE; + iwe->u.mode = (curr_bss->capa & WLAN_CAPABILITY_IBSS) ? + IW_MODE_ADHOC : + (curr_bss->capa & WLAN_CAPABILITY_ESS) ? + IW_MODE_MASTER : IW_MODE_AUTO; + /* IW_MODE_AUTO = 0 which I thought is + * the most logical value to return in this case */ + curr_pos = iwe_stream_add_event(info, curr_pos, + extra + IW_SCAN_MAX_DATA, iwe, + IW_EV_UINT_LEN); + + iwe->cmd = SIOCGIWFREQ; + iwe->u.freq.m = curr_bss->channel; + iwe->u.freq.e = 0; + curr_pos = iwe_stream_add_event(info, curr_pos, + extra + IW_SCAN_MAX_DATA, iwe, + IW_EV_FREQ_LEN); + + iwe->cmd = SIOCGIWENCODE; + if (curr_bss->capa & WLAN_CAPABILITY_PRIVACY) + iwe->u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe->u.data.flags = IW_ENCODE_DISABLED; + + iwe->u.data.length = 0; + curr_pos = iwe_stream_add_point(info, curr_pos, + extra + IW_SCAN_MAX_DATA, iwe, + NULL); + + /* Add quality statistics */ + iwe->cmd = IWEVQUAL; + iwe->u.qual.noise = 0; + iwe->u.qual.updated = + IW_QUAL_NOISE_INVALID | IW_QUAL_LEVEL_UPDATED; + iwe->u.qual.level = (curr_bss->rssi * 100 / 42); + if (iwe->u.qual.level > 100) + iwe->u.qual.level = 100; + if (at76_is_intersil(priv->board_type)) + iwe->u.qual.qual = curr_bss->link_qual; + else { + iwe->u.qual.qual = 0; + iwe->u.qual.updated |= IW_QUAL_QUAL_INVALID; + } + /* Add new value to event */ + curr_pos = iwe_stream_add_event(info, curr_pos, + extra + IW_SCAN_MAX_DATA, iwe, + IW_EV_QUAL_LEN); + + /* Rate: stuffing multiple values in a single event requires + * a bit more of magic - Jean II */ + curr_val = curr_pos + IW_EV_LCP_LEN; + + iwe->cmd = SIOCGIWRATE; + /* Those two flags are ignored... */ + iwe->u.bitrate.fixed = 0; + iwe->u.bitrate.disabled = 0; + /* Max 8 values */ + for (i = 0; i < curr_bss->rates_len; i++) { + /* Bit rate given in 500 kb/s units (+ 0x80) */ + iwe->u.bitrate.value = + ((curr_bss->rates[i] & 0x7f) * 500000); + /* Add new value to event */ + curr_val = iwe_stream_add_value(info, curr_pos, + curr_val, + extra + + IW_SCAN_MAX_DATA, iwe, + IW_EV_PARAM_LEN); + } + + /* Check if we added any event */ + if ((curr_val - curr_pos) > IW_EV_LCP_LEN) + curr_pos = curr_val; + + /* more information may be sent back using IWECUSTOM */ + + } + + spin_unlock_irqrestore(&priv->bss_list_spinlock, flags); + + data->length = (curr_pos - extra); + data->flags = 0; + + kfree(iwe); + return 0; +} + +static int at76_iw_handler_set_essid(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWESSID - %s", netdev->name, extra); + + if (data->flags) { + memcpy(priv->essid, extra, data->length); + priv->essid_size = data->length; + } else + priv->essid_size = 0; /* Use any SSID */ + + return -EIWCOMMIT; +} + +static int at76_iw_handler_get_essid(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + if (priv->essid_size) { + /* not the ANY ssid in priv->essid */ + data->flags = 1; + data->length = priv->essid_size; + memcpy(extra, priv->essid, data->length); + } else { + /* the ANY ssid was specified */ + if (priv->mac_state == MAC_CONNECTED && priv->curr_bss) { + /* report the SSID we have found */ + data->flags = 1; + data->length = priv->curr_bss->ssid_len; + memcpy(extra, priv->curr_bss->ssid, data->length); + } else { + /* report ANY back */ + data->flags = 0; + data->length = 0; + } + } + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWESSID - %.*s", netdev->name, + data->length, extra); + + return 0; +} + +static int at76_iw_handler_set_rate(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *bitrate, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = -EIWCOMMIT; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWRATE - %d", netdev->name, + bitrate->value); + + switch (bitrate->value) { + case -1: + priv->txrate = TX_RATE_AUTO; + break; /* auto rate */ + case 1000000: + priv->txrate = TX_RATE_1MBIT; + break; + case 2000000: + priv->txrate = TX_RATE_2MBIT; + break; + case 5500000: + priv->txrate = TX_RATE_5_5MBIT; + break; + case 11000000: + priv->txrate = TX_RATE_11MBIT; + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int at76_iw_handler_get_rate(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *bitrate, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = 0; + + switch (priv->txrate) { + /* return max rate if RATE_AUTO */ + case TX_RATE_AUTO: + bitrate->value = 11000000; + break; + case TX_RATE_1MBIT: + bitrate->value = 1000000; + break; + case TX_RATE_2MBIT: + bitrate->value = 2000000; + break; + case TX_RATE_5_5MBIT: + bitrate->value = 5500000; + break; + case TX_RATE_11MBIT: + bitrate->value = 11000000; + break; + default: + ret = -EINVAL; + } + + bitrate->fixed = (priv->txrate != TX_RATE_AUTO); + bitrate->disabled = 0; + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWRATE - %d", netdev->name, + bitrate->value); + + return ret; +} + +static int at76_iw_handler_set_rts(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *rts, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = -EIWCOMMIT; + int rthr = rts->value; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWRTS - value %d disabled %s", + netdev->name, rts->value, (rts->disabled) ? "true" : "false"); + + if (rts->disabled) + rthr = MAX_RTS_THRESHOLD; + + if ((rthr < 0) || (rthr > MAX_RTS_THRESHOLD)) + ret = -EINVAL; + else + priv->rts_threshold = rthr; + + return ret; +} + +static int at76_iw_handler_get_rts(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *rts, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + rts->value = priv->rts_threshold; + rts->disabled = (rts->value >= MAX_RTS_THRESHOLD); + rts->fixed = 1; + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWRTS - value %d disabled %s", + netdev->name, rts->value, (rts->disabled) ? "true" : "false"); + + return 0; +} + +static int at76_iw_handler_set_frag(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *frag, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = -EIWCOMMIT; + int fthr = frag->value; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWFRAG - value %d, disabled %s", + netdev->name, frag->value, + (frag->disabled) ? "true" : "false"); + + if (frag->disabled) + fthr = MAX_FRAG_THRESHOLD; + + if ((fthr < MIN_FRAG_THRESHOLD) || (fthr > MAX_FRAG_THRESHOLD)) + ret = -EINVAL; + else + priv->frag_threshold = fthr & ~0x1; /* get an even value */ + + return ret; +} + +static int at76_iw_handler_get_frag(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *frag, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + frag->value = priv->frag_threshold; + frag->disabled = (frag->value >= MAX_FRAG_THRESHOLD); + frag->fixed = 1; + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWFRAG - value %d, disabled %s", + netdev->name, frag->value, + (frag->disabled) ? "true" : "false"); + + return 0; +} + +static int at76_iw_handler_get_txpow(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *power, char *extra) +{ + power->value = 15; + power->fixed = 1; /* No power control */ + power->disabled = 0; + power->flags = IW_TXPOW_DBM; + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWTXPOW - txpow %d dBm", netdev->name, + power->value); + + return 0; +} + +/* jal: short retry is handled by the firmware (at least 0.90.x), + while long retry is not (?) */ +static int at76_iw_handler_set_retry(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *retry, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = -EIWCOMMIT; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWRETRY disabled %d flags 0x%x val %d", + netdev->name, retry->disabled, retry->flags, retry->value); + + if (!retry->disabled && (retry->flags & IW_RETRY_LIMIT)) { + if ((retry->flags & IW_RETRY_MIN) || + !(retry->flags & IW_RETRY_MAX)) + priv->short_retry_limit = retry->value; + else + ret = -EINVAL; + } else + ret = -EINVAL; + + return ret; +} + +/* Adapted (ripped) from atmel.c */ +static int at76_iw_handler_get_retry(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *retry, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWRETRY", netdev->name); + + retry->disabled = 0; /* Can't be disabled */ + retry->flags = IW_RETRY_LIMIT; + retry->value = priv->short_retry_limit; + + return 0; +} + +static int at76_iw_handler_set_encode(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *encoding, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int index = (encoding->flags & IW_ENCODE_INDEX) - 1; + int len = encoding->length; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWENCODE - enc.flags %08x " + "pointer %p len %d", netdev->name, encoding->flags, + encoding->pointer, encoding->length); + at76_dbg(DBG_IOCTL, + "%s: SIOCSIWENCODE - old wepstate: enabled %s key_id %d " + "auth_mode %s", netdev->name, + (priv->wep_enabled) ? "true" : "false", priv->wep_key_id, + (priv->auth_mode == + WLAN_AUTH_SHARED_KEY) ? "restricted" : "open"); + + /* take the old default key if index is invalid */ + if ((index < 0) || (index >= WEP_KEYS)) + index = priv->wep_key_id; + + if (len > 0) { + if (len > WEP_LARGE_KEY_LEN) + len = WEP_LARGE_KEY_LEN; + + memset(priv->wep_keys[index], 0, WEP_KEY_LEN); + memcpy(priv->wep_keys[index], extra, len); + priv->wep_keys_len[index] = (len <= WEP_SMALL_KEY_LEN) ? + WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN; + priv->wep_enabled = 1; + } + + priv->wep_key_id = index; + priv->wep_enabled = ((encoding->flags & IW_ENCODE_DISABLED) == 0); + + if (encoding->flags & IW_ENCODE_RESTRICTED) + priv->auth_mode = WLAN_AUTH_SHARED_KEY; + if (encoding->flags & IW_ENCODE_OPEN) + priv->auth_mode = WLAN_AUTH_OPEN; + + at76_dbg(DBG_IOCTL, + "%s: SIOCSIWENCODE - new wepstate: enabled %s key_id %d " + "key_len %d auth_mode %s", netdev->name, + (priv->wep_enabled) ? "true" : "false", priv->wep_key_id + 1, + priv->wep_keys_len[priv->wep_key_id], + (priv->auth_mode == + WLAN_AUTH_SHARED_KEY) ? "restricted" : "open"); + + return -EIWCOMMIT; +} + +static int at76_iw_handler_get_encode(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *encoding, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int index = (encoding->flags & IW_ENCODE_INDEX) - 1; + + if ((index < 0) || (index >= WEP_KEYS)) + index = priv->wep_key_id; + + encoding->flags = + (priv->auth_mode == WLAN_AUTH_SHARED_KEY) ? + IW_ENCODE_RESTRICTED : IW_ENCODE_OPEN; + + if (!priv->wep_enabled) + encoding->flags |= IW_ENCODE_DISABLED; + + if (encoding->pointer) { + encoding->length = priv->wep_keys_len[index]; + + memcpy(extra, priv->wep_keys[index], priv->wep_keys_len[index]); + + encoding->flags |= (index + 1); + } + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWENCODE - enc.flags %08x " + "pointer %p len %d", netdev->name, encoding->flags, + encoding->pointer, encoding->length); + at76_dbg(DBG_IOCTL, + "%s: SIOCGIWENCODE - wepstate: enabled %s key_id %d " + "key_len %d auth_mode %s", netdev->name, + (priv->wep_enabled) ? "true" : "false", priv->wep_key_id + 1, + priv->wep_keys_len[priv->wep_key_id], + (priv->auth_mode == + WLAN_AUTH_SHARED_KEY) ? "restricted" : "open"); + + return 0; +} + +static int at76_iw_handler_set_power(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *prq, char *extra) +{ + int err = -EIWCOMMIT; + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, + "%s: SIOCSIWPOWER - disabled %s flags 0x%x value 0x%x", + netdev->name, (prq->disabled) ? "true" : "false", prq->flags, + prq->value); + + if (prq->disabled) + priv->pm_mode = AT76_PM_OFF; + else { + switch (prq->flags & IW_POWER_MODE) { + case IW_POWER_ALL_R: + case IW_POWER_ON: + break; + default: + err = -EINVAL; + goto exit; + } + if (prq->flags & IW_POWER_PERIOD) + priv->pm_period = prq->value; + + if (prq->flags & IW_POWER_TIMEOUT) { + err = -EINVAL; + goto exit; + } + priv->pm_mode = AT76_PM_ON; + } +exit: + return err; +} + +static int at76_iw_handler_get_power(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *power, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + power->disabled = (priv->pm_mode == AT76_PM_OFF); + if (!power->disabled) { + power->flags = IW_POWER_PERIOD | IW_POWER_ALL_R; + power->value = priv->pm_period; + } + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWPOWER - %s flags 0x%x value 0x%x", + netdev->name, power->disabled ? "disabled" : "enabled", + power->flags, power->value); + + return 0; +} + +/******************************************************************************* + * Private IOCTLS + */ +static int at76_iw_set_short_preamble(struct net_device *netdev, + struct iw_request_info *info, char *name, + char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int val = *((int *)name); + int ret = -EIWCOMMIT; + + at76_dbg(DBG_IOCTL, "%s: AT76_SET_SHORT_PREAMBLE, %d", + netdev->name, val); + + if (val < PREAMBLE_TYPE_LONG || val > PREAMBLE_TYPE_AUTO) + ret = -EINVAL; + else + priv->preamble_type = val; + + return ret; +} + +static int at76_iw_get_short_preamble(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + snprintf(wrqu->name, sizeof(wrqu->name), "%s (%d)", + preambles[priv->preamble_type], priv->preamble_type); + return 0; +} + +static int at76_iw_set_debug(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + char *ptr; + u32 val; + + if (data->length > 0) { + val = simple_strtol(extra, &ptr, 0); + + if (ptr == extra) + val = DBG_DEFAULTS; + + at76_dbg(DBG_IOCTL, "%s: AT76_SET_DEBUG input %d: %s -> 0x%x", + netdev->name, data->length, extra, val); + } else + val = DBG_DEFAULTS; + + at76_dbg(DBG_IOCTL, "%s: AT76_SET_DEBUG, old 0x%x, new 0x%x", + netdev->name, at76_debug, val); + + /* jal: some more output to pin down lockups */ + at76_dbg(DBG_IOCTL, "%s: netif running %d queue_stopped %d " + "carrier_ok %d", netdev->name, netif_running(netdev), + netif_queue_stopped(netdev), netif_carrier_ok(netdev)); + + at76_debug = val; + + return 0; +} + +static int at76_iw_get_debug(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + snprintf(wrqu->name, sizeof(wrqu->name), "0x%08x", at76_debug); + return 0; +} + +static int at76_iw_set_powersave_mode(struct net_device *netdev, + struct iw_request_info *info, char *name, + char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int val = *((int *)name); + int ret = -EIWCOMMIT; + + at76_dbg(DBG_IOCTL, "%s: AT76_SET_POWERSAVE_MODE, %d (%s)", + netdev->name, val, + val == AT76_PM_OFF ? "active" : val == AT76_PM_ON ? "save" : + val == AT76_PM_SMART ? "smart save" : "<invalid>"); + if (val < AT76_PM_OFF || val > AT76_PM_SMART) + ret = -EINVAL; + else + priv->pm_mode = val; + + return ret; +} + +static int at76_iw_get_powersave_mode(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int *param = (int *)extra; + + param[0] = priv->pm_mode; + return 0; +} + +static int at76_iw_set_scan_times(struct net_device *netdev, + struct iw_request_info *info, char *name, + char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int mint = *((int *)name); + int maxt = *((int *)name + 1); + int ret = -EIWCOMMIT; + + at76_dbg(DBG_IOCTL, "%s: AT76_SET_SCAN_TIMES - min %d max %d", + netdev->name, mint, maxt); + if (mint <= 0 || maxt <= 0 || mint > maxt) + ret = -EINVAL; + else { + priv->scan_min_time = mint; + priv->scan_max_time = maxt; + } + + return ret; +} + +static int at76_iw_get_scan_times(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int *param = (int *)extra; + + param[0] = priv->scan_min_time; + param[1] = priv->scan_max_time; + return 0; +} + +static int at76_iw_set_scan_mode(struct net_device *netdev, + struct iw_request_info *info, char *name, + char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int val = *((int *)name); + int ret = -EIWCOMMIT; + + at76_dbg(DBG_IOCTL, "%s: AT76_SET_SCAN_MODE - mode %s", + netdev->name, (val = SCAN_TYPE_ACTIVE) ? "active" : + (val = SCAN_TYPE_PASSIVE) ? "passive" : "<invalid>"); + + if (val != SCAN_TYPE_ACTIVE && val != SCAN_TYPE_PASSIVE) + ret = -EINVAL; + else + priv->scan_mode = val; + + return ret; +} + +static int at76_iw_get_scan_mode(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int *param = (int *)extra; + + param[0] = priv->scan_mode; + return 0; +} + +#define AT76_SET_HANDLER(h, f) [h - SIOCIWFIRST] = (iw_handler) f + +/* Standard wireless handlers */ +static const iw_handler at76_handlers[] = { + AT76_SET_HANDLER(SIOCSIWCOMMIT, at76_iw_handler_commit), + AT76_SET_HANDLER(SIOCGIWNAME, at76_iw_handler_get_name), + AT76_SET_HANDLER(SIOCSIWFREQ, at76_iw_handler_set_freq), + AT76_SET_HANDLER(SIOCGIWFREQ, at76_iw_handler_get_freq), + AT76_SET_HANDLER(SIOCSIWMODE, at76_iw_handler_set_mode), + AT76_SET_HANDLER(SIOCGIWMODE, at76_iw_handler_get_mode), + AT76_SET_HANDLER(SIOCGIWRANGE, at76_iw_handler_get_range), + AT76_SET_HANDLER(SIOCSIWSPY, at76_iw_handler_set_spy), + AT76_SET_HANDLER(SIOCGIWSPY, at76_iw_handler_get_spy), + AT76_SET_HANDLER(SIOCSIWTHRSPY, at76_iw_handler_set_thrspy), + AT76_SET_HANDLER(SIOCGIWTHRSPY, at76_iw_handler_get_thrspy), + AT76_SET_HANDLER(SIOCSIWAP, at76_iw_handler_set_wap), + AT76_SET_HANDLER(SIOCGIWAP, at76_iw_handler_get_wap), + AT76_SET_HANDLER(SIOCSIWSCAN, at76_iw_handler_set_scan), + AT76_SET_HANDLER(SIOCGIWSCAN, at76_iw_handler_get_scan), + AT76_SET_HANDLER(SIOCSIWESSID, at76_iw_handler_set_essid), + AT76_SET_HANDLER(SIOCGIWESSID, at76_iw_handler_get_essid), + AT76_SET_HANDLER(SIOCSIWRATE, at76_iw_handler_set_rate), + AT76_SET_HANDLER(SIOCGIWRATE, at76_iw_handler_get_rate), + AT76_SET_HANDLER(SIOCSIWRTS, at76_iw_handler_set_rts), + AT76_SET_HANDLER(SIOCGIWRTS, at76_iw_handler_get_rts), + AT76_SET_HANDLER(SIOCSIWFRAG, at76_iw_handler_set_frag), + AT76_SET_HANDLER(SIOCGIWFRAG, at76_iw_handler_get_frag), + AT76_SET_HANDLER(SIOCGIWTXPOW, at76_iw_handler_get_txpow), + AT76_SET_HANDLER(SIOCSIWRETRY, at76_iw_handler_set_retry), + AT76_SET_HANDLER(SIOCGIWRETRY, at76_iw_handler_get_retry), + AT76_SET_HANDLER(SIOCSIWENCODE, at76_iw_handler_set_encode), + AT76_SET_HANDLER(SIOCGIWENCODE, at76_iw_handler_get_encode), + AT76_SET_HANDLER(SIOCSIWPOWER, at76_iw_handler_set_power), + AT76_SET_HANDLER(SIOCGIWPOWER, at76_iw_handler_get_power) +}; + +#define AT76_SET_PRIV(h, f) [h - SIOCIWFIRSTPRIV] = (iw_handler) f + +/* Private wireless handlers */ +static const iw_handler at76_priv_handlers[] = { + AT76_SET_PRIV(AT76_SET_SHORT_PREAMBLE, at76_iw_set_short_preamble), + AT76_SET_PRIV(AT76_GET_SHORT_PREAMBLE, at76_iw_get_short_preamble), + AT76_SET_PRIV(AT76_SET_DEBUG, at76_iw_set_debug), + AT76_SET_PRIV(AT76_GET_DEBUG, at76_iw_get_debug), + AT76_SET_PRIV(AT76_SET_POWERSAVE_MODE, at76_iw_set_powersave_mode), + AT76_SET_PRIV(AT76_GET_POWERSAVE_MODE, at76_iw_get_powersave_mode), + AT76_SET_PRIV(AT76_SET_SCAN_TIMES, at76_iw_set_scan_times), + AT76_SET_PRIV(AT76_GET_SCAN_TIMES, at76_iw_get_scan_times), + AT76_SET_PRIV(AT76_SET_SCAN_MODE, at76_iw_set_scan_mode), + AT76_SET_PRIV(AT76_GET_SCAN_MODE, at76_iw_get_scan_mode), +}; + +/* Names and arguments of private wireless handlers */ +static const struct iw_priv_args at76_priv_args[] = { + /* 0 - long, 1 - short */ + {AT76_SET_SHORT_PREAMBLE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble"}, + + {AT76_GET_SHORT_PREAMBLE, + 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 10, "get_preamble"}, + + /* we must pass the new debug mask as a string, because iwpriv cannot + * parse hex numbers starting with 0x :-( */ + {AT76_SET_DEBUG, + IW_PRIV_TYPE_CHAR | 10, 0, "set_debug"}, + + {AT76_GET_DEBUG, + 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 10, "get_debug"}, + + /* 1 - active, 2 - power save, 3 - smart power save */ + {AT76_SET_POWERSAVE_MODE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_powersave"}, + + {AT76_GET_POWERSAVE_MODE, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_powersave"}, + + /* min_channel_time, max_channel_time */ + {AT76_SET_SCAN_TIMES, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "set_scan_times"}, + + {AT76_GET_SCAN_TIMES, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, "get_scan_times"}, + + /* 0 - active, 1 - passive scan */ + {AT76_SET_SCAN_MODE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_scan_mode"}, + + {AT76_GET_SCAN_MODE, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_scan_mode"}, +}; + +static const struct iw_handler_def at76_handler_def = { + .num_standard = ARRAY_SIZE(at76_handlers), + .num_private = ARRAY_SIZE(at76_priv_handlers), + .num_private_args = ARRAY_SIZE(at76_priv_args), + .standard = at76_handlers, + .private = at76_priv_handlers, + .private_args = at76_priv_args, + .get_wireless_stats = at76_get_wireless_stats, +}; + +static const u8 snapsig[] = { 0xaa, 0xaa, 0x03 }; + +/* RFC 1042 encapsulates Ethernet frames in 802.2 SNAP (0xaa, 0xaa, 0x03) with + * a SNAP OID of 0 (0x00, 0x00, 0x00) */ +static const u8 rfc1042sig[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; + +static int at76_tx(struct sk_buff *skb, struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + struct net_device_stats *stats = &priv->stats; + int ret = 0; + int wlen; + int submit_len; + struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer; + struct ieee80211_hdr_3addr *i802_11_hdr = + (struct ieee80211_hdr_3addr *)tx_buffer->packet; + u8 *payload = i802_11_hdr->payload; + struct ethhdr *eh = (struct ethhdr *)skb->data; + + if (netif_queue_stopped(netdev)) { + printk(KERN_ERR "%s: %s called while netdev is stopped\n", + netdev->name, __func__); + /* skip this packet */ + dev_kfree_skb(skb); + return 0; + } + + if (priv->tx_urb->status == -EINPROGRESS) { + printk(KERN_ERR "%s: %s called while tx urb is pending\n", + netdev->name, __func__); + /* skip this packet */ + dev_kfree_skb(skb); + return 0; + } + + if (skb->len < ETH_HLEN) { + printk(KERN_ERR "%s: %s: skb too short (%d)\n", + netdev->name, __func__, skb->len); + dev_kfree_skb(skb); + return 0; + } + + at76_ledtrig_tx_activity(); /* tell ledtrigger we send a packet */ + + /* we can get rid of memcpy if we set netdev->hard_header_len to + reserve enough space, but we would need to keep the skb around */ + + if (ntohs(eh->h_proto) <= ETH_DATA_LEN) { + /* this is a 802.3 packet */ + if (skb->len >= ETH_HLEN + sizeof(rfc1042sig) + && skb->data[ETH_HLEN] == rfc1042sig[0] + && skb->data[ETH_HLEN + 1] == rfc1042sig[1]) { + /* higher layer delivered SNAP header - keep it */ + memcpy(payload, skb->data + ETH_HLEN, + skb->len - ETH_HLEN); + wlen = IEEE80211_3ADDR_LEN + skb->len - ETH_HLEN; + } else { + printk(KERN_ERR "%s: dropping non-SNAP 802.2 packet " + "(DSAP 0x%02x SSAP 0x%02x cntrl 0x%02x)\n", + priv->netdev->name, skb->data[ETH_HLEN], + skb->data[ETH_HLEN + 1], + skb->data[ETH_HLEN + 2]); + dev_kfree_skb(skb); + return 0; + } + } else { + /* add RFC 1042 header in front */ + memcpy(payload, rfc1042sig, sizeof(rfc1042sig)); + memcpy(payload + sizeof(rfc1042sig), &eh->h_proto, + skb->len - offsetof(struct ethhdr, h_proto)); + wlen = IEEE80211_3ADDR_LEN + sizeof(rfc1042sig) + skb->len - + offsetof(struct ethhdr, h_proto); + } + + /* make wireless header */ + i802_11_hdr->frame_ctl = + cpu_to_le16(IEEE80211_FTYPE_DATA | + (priv->wep_enabled ? IEEE80211_FCTL_PROTECTED : 0) | + (priv->iw_mode == + IW_MODE_INFRA ? IEEE80211_FCTL_TODS : 0)); + + if (priv->iw_mode == IW_MODE_ADHOC) { + memcpy(i802_11_hdr->addr1, eh->h_dest, ETH_ALEN); + memcpy(i802_11_hdr->addr2, eh->h_source, ETH_ALEN); + memcpy(i802_11_hdr->addr3, priv->bssid, ETH_ALEN); + } else if (priv->iw_mode == IW_MODE_INFRA) { + memcpy(i802_11_hdr->addr1, priv->bssid, ETH_ALEN); + memcpy(i802_11_hdr->addr2, eh->h_source, ETH_ALEN); + memcpy(i802_11_hdr->addr3, eh->h_dest, ETH_ALEN); + } + + i802_11_hdr->duration_id = cpu_to_le16(0); + i802_11_hdr->seq_ctl = cpu_to_le16(0); + + /* setup 'Atmel' header */ + tx_buffer->wlength = cpu_to_le16(wlen); + tx_buffer->tx_rate = priv->txrate; + /* for broadcast destination addresses, the firmware 0.100.x + seems to choose the highest rate set with CMD_STARTUP in + basic_rate_set replacing this value */ + + memset(tx_buffer->reserved, 0, sizeof(tx_buffer->reserved)); + + tx_buffer->padding = at76_calc_padding(wlen); + submit_len = wlen + AT76_TX_HDRLEN + tx_buffer->padding; + + at76_dbg(DBG_TX_DATA_CONTENT, "%s skb->data %s", priv->netdev->name, + hex2str(skb->data, 32)); + at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr %s", + priv->netdev->name, + le16_to_cpu(tx_buffer->wlength), + tx_buffer->padding, tx_buffer->tx_rate, + hex2str(i802_11_hdr, sizeof(*i802_11_hdr))); + at76_dbg(DBG_TX_DATA_CONTENT, "%s payload %s", priv->netdev->name, + hex2str(payload, 48)); + + /* send stuff */ + netif_stop_queue(netdev); + netdev->trans_start = jiffies; + + usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, tx_buffer, + submit_len, at76_tx_callback, priv); + ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC); + if (ret) { + stats->tx_errors++; + printk(KERN_ERR "%s: error in tx submit urb: %d\n", + netdev->name, ret); + if (ret == -EINVAL) + printk(KERN_ERR + "%s: -EINVAL: tx urb %p hcpriv %p complete %p\n", + priv->netdev->name, priv->tx_urb, + priv->tx_urb->hcpriv, priv->tx_urb->complete); + } else { + stats->tx_bytes += skb->len; + dev_kfree_skb(skb); + } + + return ret; +} + +static void at76_tx_timeout(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + + if (!priv) + return; + dev_warn(&netdev->dev, "tx timeout."); + + usb_unlink_urb(priv->tx_urb); + priv->stats.tx_errors++; +} + static int at76_submit_rx_urb(struct at76_priv *priv) { int ret; @@ -1327,7 +3270,7 @@ static int at76_submit_rx_urb(struct at76_priv *priv) if (!priv->rx_urb) { printk(KERN_ERR "%s: %s: priv->rx_urb is NULL\n", - wiphy_name(priv->hw->wiphy), __func__); + priv->netdev->name, __func__); return -EFAULT; } @@ -1335,7 +3278,7 @@ static int at76_submit_rx_urb(struct at76_priv *priv) skb = dev_alloc_skb(sizeof(struct at76_rx_buffer)); if (!skb) { printk(KERN_ERR "%s: cannot allocate rx skbuff\n", - wiphy_name(priv->hw->wiphy)); + priv->netdev->name); ret = -ENOMEM; goto exit; } @@ -1355,18 +3298,110 @@ static int at76_submit_rx_urb(struct at76_priv *priv) "usb_submit_urb returned -ENODEV"); else printk(KERN_ERR "%s: rx, usb_submit_urb failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); } exit: if (ret < 0 && ret != -ENODEV) printk(KERN_ERR "%s: cannot submit rx urb - please unload the " "driver and/or power cycle the device\n", - wiphy_name(priv->hw->wiphy)); + priv->netdev->name); return ret; } +static int at76_open(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = 0; + + at76_dbg(DBG_PROC_ENTRY, "%s(): entry", __func__); + + if (mutex_lock_interruptible(&priv->mtx)) + return -EINTR; + + /* if netdev->dev_addr != priv->mac_addr we must + set the mac address in the device ! */ + if (compare_ether_addr(netdev->dev_addr, priv->mac_addr)) { + if (at76_add_mac_address(priv, netdev->dev_addr) >= 0) + at76_dbg(DBG_PROGRESS, "%s: set new MAC addr %s", + netdev->name, mac2str(netdev->dev_addr)); + } + + priv->scan_state = SCAN_IDLE; + priv->last_scan = jiffies; + + ret = at76_submit_rx_urb(priv); + if (ret < 0) { + printk(KERN_ERR "%s: open: submit_rx_urb failed: %d\n", + netdev->name, ret); + goto error; + } + + schedule_delayed_work(&priv->dwork_restart, 0); + + at76_dbg(DBG_PROC_ENTRY, "%s(): end", __func__); +error: + mutex_unlock(&priv->mtx); + return ret < 0 ? ret : 0; +} + +static int at76_stop(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_DEVSTART, "%s: ENTER", __func__); + + if (mutex_lock_interruptible(&priv->mtx)) + return -EINTR; + + at76_quiesce(priv); + + if (!priv->device_unplugged) { + /* We are called by "ifconfig ethX down", not because the + * device is not available anymore. */ + at76_set_radio(priv, 0); + + /* We unlink rx_urb because at76_open() re-submits it. + * If unplugged, at76_delete_device() takes care of it. */ + usb_kill_urb(priv->rx_urb); + } + + /* free the bss_list */ + at76_free_bss_list(priv); + + mutex_unlock(&priv->mtx); + at76_dbg(DBG_DEVSTART, "%s: EXIT", __func__); + + return 0; +} + +static void at76_ethtool_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *info) +{ + struct at76_priv *priv = netdev_priv(netdev); + + strncpy(info->driver, DRIVER_NAME, sizeof(info->driver)); + strncpy(info->version, DRIVER_VERSION, sizeof(info->version)); + + usb_make_path(priv->udev, info->bus_info, sizeof(info->bus_info)); + + snprintf(info->fw_version, sizeof(info->fw_version), "%d.%d.%d-%d", + priv->fw_version.major, priv->fw_version.minor, + priv->fw_version.patch, priv->fw_version.build); +} + +static u32 at76_ethtool_get_link(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + return priv->mac_state == MAC_CONNECTED; +} + +static struct ethtool_ops at76_ethtool_ops = { + .get_drvinfo = at76_ethtool_get_drvinfo, + .get_link = at76_ethtool_get_link, +}; + /* Download external firmware */ static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe) { @@ -1463,6 +3498,406 @@ exit: return ret; } +static int at76_match_essid(struct at76_priv *priv, struct bss_info *ptr) +{ + /* common criteria for both modi */ + + int ret = (priv->essid_size == 0 /* ANY ssid */ || + (priv->essid_size == ptr->ssid_len && + !memcmp(priv->essid, ptr->ssid, ptr->ssid_len))); + if (!ret) + at76_dbg(DBG_BSS_MATCH, + "%s bss table entry %p: essid didn't match", + priv->netdev->name, ptr); + return ret; +} + +static inline int at76_match_mode(struct at76_priv *priv, struct bss_info *ptr) +{ + int ret; + + if (priv->iw_mode == IW_MODE_ADHOC) + ret = ptr->capa & WLAN_CAPABILITY_IBSS; + else + ret = ptr->capa & WLAN_CAPABILITY_ESS; + if (!ret) + at76_dbg(DBG_BSS_MATCH, + "%s bss table entry %p: mode didn't match", + priv->netdev->name, ptr); + return ret; +} + +static int at76_match_rates(struct at76_priv *priv, struct bss_info *ptr) +{ + int i; + + for (i = 0; i < ptr->rates_len; i++) { + u8 rate = ptr->rates[i]; + + if (!(rate & 0x80)) + continue; + + /* this is a basic rate we have to support + (see IEEE802.11, ch. 7.3.2.2) */ + if (rate != (0x80 | hw_rates[0]) + && rate != (0x80 | hw_rates[1]) + && rate != (0x80 | hw_rates[2]) + && rate != (0x80 | hw_rates[3])) { + at76_dbg(DBG_BSS_MATCH, + "%s: bss table entry %p: basic rate %02x not " + "supported", priv->netdev->name, ptr, rate); + return 0; + } + } + + /* if we use short preamble, the bss must support it */ + if (priv->preamble_type == PREAMBLE_TYPE_SHORT && + !(ptr->capa & WLAN_CAPABILITY_SHORT_PREAMBLE)) { + at76_dbg(DBG_BSS_MATCH, + "%s: %p does not support short preamble", + priv->netdev->name, ptr); + return 0; + } else + return 1; +} + +static inline int at76_match_wep(struct at76_priv *priv, struct bss_info *ptr) +{ + if (!priv->wep_enabled && ptr->capa & WLAN_CAPABILITY_PRIVACY) { + /* we have disabled WEP, but the BSS signals privacy */ + at76_dbg(DBG_BSS_MATCH, + "%s: bss table entry %p: requires encryption", + priv->netdev->name, ptr); + return 0; + } + /* otherwise if the BSS does not signal privacy it may well + accept encrypted packets from us ... */ + return 1; +} + +static inline int at76_match_bssid(struct at76_priv *priv, struct bss_info *ptr) +{ + if (!priv->wanted_bssid_valid || + !compare_ether_addr(ptr->bssid, priv->wanted_bssid)) + return 1; + + at76_dbg(DBG_BSS_MATCH, + "%s: requested bssid - %s does not match", + priv->netdev->name, mac2str(priv->wanted_bssid)); + at76_dbg(DBG_BSS_MATCH, + " AP bssid - %s of bss table entry %p", + mac2str(ptr->bssid), ptr); + return 0; +} + +/** + * at76_match_bss - try to find a matching bss in priv->bss + * + * last - last bss tried + * + * last == NULL signals a new round starting with priv->bss_list.next + * this function must be called inside an acquired priv->bss_list_spinlock + * otherwise the timeout on bss may remove the newly chosen entry + */ +static struct bss_info *at76_match_bss(struct at76_priv *priv, + struct bss_info *last) +{ + struct bss_info *ptr = NULL; + struct list_head *curr; + + curr = last ? last->list.next : priv->bss_list.next; + while (curr != &priv->bss_list) { + ptr = list_entry(curr, struct bss_info, list); + if (at76_match_essid(priv, ptr) && at76_match_mode(priv, ptr) + && at76_match_wep(priv, ptr) && at76_match_rates(priv, ptr) + && at76_match_bssid(priv, ptr)) + break; + curr = curr->next; + } + + if (curr == &priv->bss_list) + ptr = NULL; + /* otherwise ptr points to the struct bss_info we have chosen */ + + at76_dbg(DBG_BSS_TABLE, "%s %s: returned %p", priv->netdev->name, + __func__, ptr); + return ptr; +} + +/* Start joining a matching BSS, or create own IBSS */ +static void at76_work_join(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + work_join); + int ret; + unsigned long flags; + + mutex_lock(&priv->mtx); + + WARN_ON(priv->mac_state != MAC_JOINING); + if (priv->mac_state != MAC_JOINING) + goto exit; + + /* secure the access to priv->curr_bss ! */ + spin_lock_irqsave(&priv->bss_list_spinlock, flags); + priv->curr_bss = at76_match_bss(priv, priv->curr_bss); + spin_unlock_irqrestore(&priv->bss_list_spinlock, flags); + + if (!priv->curr_bss) { + /* here we haven't found a matching (i)bss ... */ + if (priv->iw_mode == IW_MODE_ADHOC) { + at76_set_mac_state(priv, MAC_OWN_IBSS); + at76_start_ibss(priv); + goto exit; + } + /* haven't found a matching BSS in infra mode - try again */ + at76_set_mac_state(priv, MAC_SCANNING); + schedule_work(&priv->work_start_scan); + goto exit; + } + + ret = at76_join_bss(priv, priv->curr_bss); + if (ret < 0) { + printk(KERN_ERR "%s: join_bss failed with %d\n", + priv->netdev->name, ret); + goto exit; + } + + ret = at76_wait_completion(priv, CMD_JOIN); + if (ret != CMD_STATUS_COMPLETE) { + if (ret != CMD_STATUS_TIME_OUT) + printk(KERN_ERR "%s: join_bss completed with %d\n", + priv->netdev->name, ret); + else + printk(KERN_INFO "%s: join_bss ssid %s timed out\n", + priv->netdev->name, + mac2str(priv->curr_bss->bssid)); + + /* retry next BSS immediately */ + schedule_work(&priv->work_join); + goto exit; + } + + /* here we have joined the (I)BSS */ + if (priv->iw_mode == IW_MODE_ADHOC) { + struct bss_info *bptr = priv->curr_bss; + at76_set_mac_state(priv, MAC_CONNECTED); + /* get ESSID, BSSID and channel for priv->curr_bss */ + priv->essid_size = bptr->ssid_len; + memcpy(priv->essid, bptr->ssid, bptr->ssid_len); + memcpy(priv->bssid, bptr->bssid, ETH_ALEN); + priv->channel = bptr->channel; + at76_iwevent_bss_connect(priv->netdev, bptr->bssid); + netif_carrier_on(priv->netdev); + netif_start_queue(priv->netdev); + /* just to be sure */ + cancel_delayed_work(&priv->dwork_get_scan); + cancel_delayed_work(&priv->dwork_auth); + cancel_delayed_work(&priv->dwork_assoc); + } else { + /* send auth req */ + priv->retries = AUTH_RETRIES; + at76_set_mac_state(priv, MAC_AUTH); + at76_auth_req(priv, priv->curr_bss, 1, NULL); + at76_dbg(DBG_MGMT_TIMER, + "%s:%d: starting mgmt_timer + HZ", __func__, __LINE__); + schedule_delayed_work(&priv->dwork_auth, AUTH_TIMEOUT); + } + +exit: + mutex_unlock(&priv->mtx); +} + +/* Reap scan results */ +static void at76_dwork_get_scan(struct work_struct *work) +{ + int status; + int ret; + struct at76_priv *priv = container_of(work, struct at76_priv, + dwork_get_scan.work); + + mutex_lock(&priv->mtx); + WARN_ON(priv->mac_state != MAC_SCANNING); + if (priv->mac_state != MAC_SCANNING) + goto exit; + + status = at76_get_cmd_status(priv->udev, CMD_SCAN); + if (status < 0) { + printk(KERN_ERR "%s: %s: at76_get_cmd_status failed with %d\n", + priv->netdev->name, __func__, status); + status = CMD_STATUS_IN_PROGRESS; + /* INFO: Hope it was a one off error - if not, scanning + further down the line and stop this cycle */ + } + at76_dbg(DBG_PROGRESS, + "%s %s: got cmd_status %d (state %s, need_any %d)", + priv->netdev->name, __func__, status, + mac_states[priv->mac_state], priv->scan_need_any); + + if (status != CMD_STATUS_COMPLETE) { + if ((status != CMD_STATUS_IN_PROGRESS) && + (status != CMD_STATUS_IDLE)) + printk(KERN_ERR "%s: %s: Bad scan status: %s\n", + priv->netdev->name, __func__, + at76_get_cmd_status_string(status)); + + /* the first cmd status after scan start is always a IDLE -> + start the timer to poll again until COMPLETED */ + at76_dbg(DBG_MGMT_TIMER, + "%s:%d: starting mgmt_timer for %d ticks", + __func__, __LINE__, SCAN_POLL_INTERVAL); + schedule_delayed_work(&priv->dwork_get_scan, + SCAN_POLL_INTERVAL); + goto exit; + } + + if (at76_debug & DBG_BSS_TABLE) + at76_dump_bss_table(priv); + + if (priv->scan_need_any) { + ret = at76_start_scan(priv, 0); + if (ret < 0) + printk(KERN_ERR + "%s: %s: start_scan (ANY) failed with %d\n", + priv->netdev->name, __func__, ret); + at76_dbg(DBG_MGMT_TIMER, + "%s:%d: starting mgmt_timer for %d ticks", __func__, + __LINE__, SCAN_POLL_INTERVAL); + schedule_delayed_work(&priv->dwork_get_scan, + SCAN_POLL_INTERVAL); + priv->scan_need_any = 0; + } else { + priv->scan_state = SCAN_COMPLETED; + /* report the end of scan to user space */ + at76_iwevent_scan_complete(priv->netdev); + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); + } + +exit: + mutex_unlock(&priv->mtx); +} + +/* Handle loss of beacons from the AP */ +static void at76_dwork_beacon(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + dwork_beacon.work); + + mutex_lock(&priv->mtx); + if (priv->mac_state != MAC_CONNECTED || priv->iw_mode != IW_MODE_INFRA) + goto exit; + + /* We haven't received any beacons from out AP for BEACON_TIMEOUT */ + printk(KERN_INFO "%s: lost beacon bssid %s\n", + priv->netdev->name, mac2str(priv->curr_bss->bssid)); + + netif_carrier_off(priv->netdev); + netif_stop_queue(priv->netdev); + at76_iwevent_bss_disconnect(priv->netdev); + at76_set_mac_state(priv, MAC_SCANNING); + schedule_work(&priv->work_start_scan); + +exit: + mutex_unlock(&priv->mtx); +} + +/* Handle authentication response timeout */ +static void at76_dwork_auth(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + dwork_auth.work); + + mutex_lock(&priv->mtx); + WARN_ON(priv->mac_state != MAC_AUTH); + if (priv->mac_state != MAC_AUTH) + goto exit; + + at76_dbg(DBG_PROGRESS, "%s: authentication response timeout", + priv->netdev->name); + + if (priv->retries-- >= 0) { + at76_auth_req(priv, priv->curr_bss, 1, NULL); + at76_dbg(DBG_MGMT_TIMER, "%s:%d: starting mgmt_timer + HZ", + __func__, __LINE__); + schedule_delayed_work(&priv->dwork_auth, AUTH_TIMEOUT); + } else { + /* try to get next matching BSS */ + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); + } + +exit: + mutex_unlock(&priv->mtx); +} + +/* Handle association response timeout */ +static void at76_dwork_assoc(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + dwork_assoc.work); + + mutex_lock(&priv->mtx); + WARN_ON(priv->mac_state != MAC_ASSOC); + if (priv->mac_state != MAC_ASSOC) + goto exit; + + at76_dbg(DBG_PROGRESS, "%s: association response timeout", + priv->netdev->name); + + if (priv->retries-- >= 0) { + at76_assoc_req(priv, priv->curr_bss); + at76_dbg(DBG_MGMT_TIMER, "%s:%d: starting mgmt_timer + HZ", + __func__, __LINE__); + schedule_delayed_work(&priv->dwork_assoc, ASSOC_TIMEOUT); + } else { + /* try to get next matching BSS */ + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); + } + +exit: + mutex_unlock(&priv->mtx); +} + +/* Read new bssid in ad-hoc mode */ +static void at76_work_new_bss(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + work_new_bss); + int ret; + struct mib_mac_mgmt mac_mgmt; + + mutex_lock(&priv->mtx); + + ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, &mac_mgmt, + sizeof(struct mib_mac_mgmt)); + if (ret < 0) { + printk(KERN_ERR "%s: at76_get_mib failed: %d\n", + priv->netdev->name, ret); + goto exit; + } + + at76_dbg(DBG_PROGRESS, "ibss_change = 0x%2x", mac_mgmt.ibss_change); + memcpy(priv->bssid, mac_mgmt.current_bssid, ETH_ALEN); + at76_dbg(DBG_PROGRESS, "using BSSID %s", mac2str(priv->bssid)); + + at76_iwevent_bss_connect(priv->netdev, priv->bssid); + + priv->mib_buf.type = MIB_MAC_MGMT; + priv->mib_buf.size = 1; + priv->mib_buf.index = offsetof(struct mib_mac_mgmt, ibss_change); + priv->mib_buf.data.byte = 0; + + ret = at76_set_mib(priv, &priv->mib_buf); + if (ret < 0) + printk(KERN_ERR "%s: set_mib (ibss change ok) failed: %d\n", + priv->netdev->name, ret); + +exit: + mutex_unlock(&priv->mtx); +} + static int at76_startup_device(struct at76_priv *priv) { struct at76_card_config *ccfg = &priv->card_config; @@ -1470,14 +3905,14 @@ static int at76_startup_device(struct at76_priv *priv) at76_dbg(DBG_PARAMS, "%s param: ssid %.*s (%s) mode %s ch %d wep %s key %d " - "keylen %d", wiphy_name(priv->hw->wiphy), priv->essid_size, - priv->essid, hex2str(priv->essid, IW_ESSID_MAX_SIZE), + "keylen %d", priv->netdev->name, priv->essid_size, priv->essid, + hex2str(priv->essid, IW_ESSID_MAX_SIZE), priv->iw_mode == IW_MODE_ADHOC ? "adhoc" : "infra", priv->channel, priv->wep_enabled ? "enabled" : "disabled", priv->wep_key_id, priv->wep_keys_len[priv->wep_key_id]); at76_dbg(DBG_PARAMS, "%s param: preamble %s rts %d retry %d frag %d " - "txrate %s auth_mode %d", wiphy_name(priv->hw->wiphy), + "txrate %s auth_mode %d", priv->netdev->name, preambles[priv->preamble_type], priv->rts_threshold, priv->short_retry_limit, priv->frag_threshold, priv->txrate == TX_RATE_1MBIT ? "1MBit" : priv->txrate == @@ -1488,7 +3923,7 @@ static int at76_startup_device(struct at76_priv *priv) at76_dbg(DBG_PARAMS, "%s param: pm_mode %d pm_period %d auth_mode %s " "scan_times %d %d scan_mode %s", - wiphy_name(priv->hw->wiphy), priv->pm_mode, priv->pm_period, + priv->netdev->name, priv->pm_mode, priv->pm_period, priv->auth_mode == WLAN_AUTH_OPEN ? "open" : "shared_secret", priv->scan_min_time, priv->scan_max_time, priv->scan_mode == SCAN_TYPE_ACTIVE ? "active" : "passive"); @@ -1522,8 +3957,7 @@ static int at76_startup_device(struct at76_priv *priv) ccfg->ssid_len = priv->essid_size; ccfg->wep_default_key_id = priv->wep_key_id; - memcpy(ccfg->wep_default_key_value, priv->wep_keys, - sizeof(priv->wep_keys)); + memcpy(ccfg->wep_default_key_value, priv->wep_keys, 4 * WEP_KEY_LEN); ccfg->short_preamble = priv->preamble_type; ccfg->beacon_period = cpu_to_le16(priv->beacon_period); @@ -1532,7 +3966,7 @@ static int at76_startup_device(struct at76_priv *priv) sizeof(struct at76_card_config)); if (ret < 0) { printk(KERN_ERR "%s: at76_set_card_command failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); return ret; } @@ -1578,6 +4012,69 @@ static int at76_startup_device(struct at76_priv *priv) return 0; } +/* Restart the interface */ +static void at76_dwork_restart(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + dwork_restart.work); + + mutex_lock(&priv->mtx); + + netif_carrier_off(priv->netdev); /* stop netdev watchdog */ + netif_stop_queue(priv->netdev); /* stop tx data packets */ + + at76_startup_device(priv); + + if (priv->iw_mode != IW_MODE_MONITOR) { + priv->netdev->type = ARPHRD_ETHER; + at76_set_mac_state(priv, MAC_SCANNING); + schedule_work(&priv->work_start_scan); + } else { + priv->netdev->type = ARPHRD_IEEE80211_RADIOTAP; + at76_start_monitor(priv); + } + + mutex_unlock(&priv->mtx); +} + +/* Initiate scanning */ +static void at76_work_start_scan(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + work_start_scan); + int ret; + + mutex_lock(&priv->mtx); + + WARN_ON(priv->mac_state != MAC_SCANNING); + if (priv->mac_state != MAC_SCANNING) + goto exit; + + /* only clear the bss list when a scan is actively initiated, + * otherwise simply rely on at76_bss_list_timeout */ + if (priv->scan_state == SCAN_IN_PROGRESS) { + at76_free_bss_list(priv); + priv->scan_need_any = 1; + } else + priv->scan_need_any = 0; + + ret = at76_start_scan(priv, 1); + + if (ret < 0) + printk(KERN_ERR "%s: %s: start_scan failed with %d\n", + priv->netdev->name, __func__, ret); + else { + at76_dbg(DBG_MGMT_TIMER, + "%s:%d: starting mgmt_timer for %d ticks", + __func__, __LINE__, SCAN_POLL_INTERVAL); + schedule_delayed_work(&priv->dwork_get_scan, + SCAN_POLL_INTERVAL); + } + +exit: + mutex_unlock(&priv->mtx); +} + /* Enable or disable promiscuous mode */ static void at76_work_set_promisc(struct work_struct *work) { @@ -1595,7 +4092,7 @@ static void at76_work_set_promisc(struct work_struct *work) ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) printk(KERN_ERR "%s: set_mib (promiscuous_mode) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); mutex_unlock(&priv->mtx); } @@ -1611,759 +4108,1088 @@ static void at76_work_submit_rx(struct work_struct *work) mutex_unlock(&priv->mtx); } -static void at76_rx_tasklet(unsigned long param) +/* We got an association response */ +static void at76_rx_mgmt_assoc(struct at76_priv *priv, + struct at76_rx_buffer *buf) { - struct urb *urb = (struct urb *)param; - struct at76_priv *priv = urb->context; - struct at76_rx_buffer *buf; - struct ieee80211_rx_status rx_status = { 0 }; - - if (priv->device_unplugged) { - at76_dbg(DBG_DEVSTART, "device unplugged"); - if (urb) - at76_dbg(DBG_DEVSTART, "urb status %d", urb->status); + struct ieee80211_assoc_response *resp = + (struct ieee80211_assoc_response *)buf->packet; + u16 assoc_id = le16_to_cpu(resp->aid); + u16 status = le16_to_cpu(resp->status); + + at76_dbg(DBG_RX_MGMT, "%s: rx AssocResp bssid %s capa 0x%04x status " + "0x%04x assoc_id 0x%04x rates %s", priv->netdev->name, + mac2str(resp->header.addr3), le16_to_cpu(resp->capability), + status, assoc_id, hex2str(resp->info_element->data, + resp->info_element->len)); + + if (priv->mac_state != MAC_ASSOC) { + printk(KERN_INFO "%s: AssocResp in state %s ignored\n", + priv->netdev->name, mac_states[priv->mac_state]); return; } - if (!priv->rx_skb || !priv->rx_skb->data) - return; - - buf = (struct at76_rx_buffer *)priv->rx_skb->data; - - if (urb->status != 0) { - if (urb->status != -ENOENT && urb->status != -ECONNRESET) - at76_dbg(DBG_URB, - "%s %s: - nonzero Rx bulk status received: %d", - __func__, wiphy_name(priv->hw->wiphy), - urb->status); - return; + BUG_ON(!priv->curr_bss); + + cancel_delayed_work(&priv->dwork_assoc); + if (status == WLAN_STATUS_SUCCESS) { + struct bss_info *ptr = priv->curr_bss; + priv->assoc_id = assoc_id & 0x3fff; + /* update iwconfig params */ + memcpy(priv->bssid, ptr->bssid, ETH_ALEN); + memcpy(priv->essid, ptr->ssid, ptr->ssid_len); + priv->essid_size = ptr->ssid_len; + priv->channel = ptr->channel; + schedule_work(&priv->work_assoc_done); + } else { + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); } +} - at76_dbg(DBG_RX_ATMEL_HDR, - "%s: rx frame: rate %d rssi %d noise %d link %d", - wiphy_name(priv->hw->wiphy), buf->rx_rate, buf->rssi, - buf->noise_level, buf->link_quality); - - skb_trim(priv->rx_skb, le16_to_cpu(buf->wlength) + AT76_RX_HDRLEN); - at76_dbg_dump(DBG_RX_DATA, &priv->rx_skb->data[AT76_RX_HDRLEN], - priv->rx_skb->len, "RX: len=%d", - (int)(priv->rx_skb->len - AT76_RX_HDRLEN)); +/* Process disassociation request from the AP */ +static void at76_rx_mgmt_disassoc(struct at76_priv *priv, + struct at76_rx_buffer *buf) +{ + struct ieee80211_disassoc *resp = + (struct ieee80211_disassoc *)buf->packet; + struct ieee80211_hdr_3addr *mgmt = &resp->header; + + at76_dbg(DBG_RX_MGMT, + "%s: rx DisAssoc bssid %s reason 0x%04x destination %s", + priv->netdev->name, mac2str(mgmt->addr3), + le16_to_cpu(resp->reason), mac2str(mgmt->addr1)); + + /* We are not connected, ignore */ + if (priv->mac_state == MAC_SCANNING || priv->mac_state == MAC_INIT + || !priv->curr_bss) + return; - rx_status.signal = buf->rssi; - /* FIXME: is rate_idx still present in structure? */ - rx_status.rate_idx = buf->rx_rate; - rx_status.flag |= RX_FLAG_DECRYPTED; - rx_status.flag |= RX_FLAG_IV_STRIPPED; + /* Not our BSSID, ignore */ + if (compare_ether_addr(mgmt->addr3, priv->curr_bss->bssid)) + return; - skb_pull(priv->rx_skb, AT76_RX_HDRLEN); - at76_dbg(DBG_MAC80211, "calling ieee80211_rx_irqsafe(): %d/%d", - priv->rx_skb->len, priv->rx_skb->data_len); - ieee80211_rx_irqsafe(priv->hw, priv->rx_skb, &rx_status); + /* Not for our STA and not broadcast, ignore */ + if (compare_ether_addr(priv->netdev->dev_addr, mgmt->addr1) + && !is_broadcast_ether_addr(mgmt->addr1)) + return; - /* Use a new skb for the next receive */ - priv->rx_skb = NULL; + if (priv->mac_state != MAC_ASSOC && priv->mac_state != MAC_CONNECTED + && priv->mac_state != MAC_JOINING) { + printk(KERN_INFO "%s: DisAssoc in state %s ignored\n", + priv->netdev->name, mac_states[priv->mac_state]); + return; + } - at76_submit_rx_urb(priv); + if (priv->mac_state == MAC_CONNECTED) { + netif_carrier_off(priv->netdev); + netif_stop_queue(priv->netdev); + at76_iwevent_bss_disconnect(priv->netdev); + } + cancel_delayed_work(&priv->dwork_get_scan); + cancel_delayed_work(&priv->dwork_beacon); + cancel_delayed_work(&priv->dwork_auth); + cancel_delayed_work(&priv->dwork_assoc); + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); } -/* Load firmware into kernel memory and parse it */ -static struct fwentry *at76_load_firmware(struct usb_device *udev, - enum board_type board_type) +static void at76_rx_mgmt_auth(struct at76_priv *priv, + struct at76_rx_buffer *buf) { - int ret; - char *str; - struct at76_fw_header *fwh; - struct fwentry *fwe = &firmwares[board_type]; - - mutex_lock(&fw_mutex); - - if (fwe->loaded) { - at76_dbg(DBG_FW, "re-using previously loaded fw"); - goto exit; + struct ieee80211_auth *resp = (struct ieee80211_auth *)buf->packet; + struct ieee80211_hdr_3addr *mgmt = &resp->header; + int seq_nr = le16_to_cpu(resp->transaction); + int alg = le16_to_cpu(resp->algorithm); + int status = le16_to_cpu(resp->status); + + at76_dbg(DBG_RX_MGMT, + "%s: rx AuthFrame bssid %s alg %d seq_nr %d status %d " + "destination %s", priv->netdev->name, mac2str(mgmt->addr3), + alg, seq_nr, status, mac2str(mgmt->addr1)); + + if (alg == WLAN_AUTH_SHARED_KEY && seq_nr == 2) + at76_dbg(DBG_RX_MGMT, "%s: AuthFrame challenge %s ...", + priv->netdev->name, hex2str(resp->info_element, 18)); + + if (priv->mac_state != MAC_AUTH) { + printk(KERN_INFO "%s: ignored AuthFrame in state %s\n", + priv->netdev->name, mac_states[priv->mac_state]); + return; } - - at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname); - ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev); - if (ret < 0) { - dev_printk(KERN_ERR, &udev->dev, "firmware %s not found!\n", - fwe->fwname); - dev_printk(KERN_ERR, &udev->dev, - "you may need to download the firmware from " - "http://developer.berlios.de/projects/at76c503a/\n"); - goto exit; + if (priv->auth_mode != alg) { + printk(KERN_INFO "%s: ignored AuthFrame for alg %d\n", + priv->netdev->name, alg); + return; } - at76_dbg(DBG_FW, "got it."); - fwh = (struct at76_fw_header *)(fwe->fw->data); + BUG_ON(!priv->curr_bss); - if (fwe->fw->size <= sizeof(*fwh)) { - dev_printk(KERN_ERR, &udev->dev, - "firmware is too short (0x%zx)\n", fwe->fw->size); - goto exit; + /* Not our BSSID or not for our STA, ignore */ + if (compare_ether_addr(mgmt->addr3, priv->curr_bss->bssid) + || compare_ether_addr(priv->netdev->dev_addr, mgmt->addr1)) + return; + + cancel_delayed_work(&priv->dwork_auth); + if (status != WLAN_STATUS_SUCCESS) { + /* try to join next bss */ + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); + return; } - /* CRC currently not checked */ - fwe->board_type = le32_to_cpu(fwh->board_type); - if (fwe->board_type != board_type) { - dev_printk(KERN_ERR, &udev->dev, - "board type mismatch, requested %u, got %u\n", - board_type, fwe->board_type); - goto exit; + if (priv->auth_mode == WLAN_AUTH_OPEN || seq_nr == 4) { + priv->retries = ASSOC_RETRIES; + at76_set_mac_state(priv, MAC_ASSOC); + at76_assoc_req(priv, priv->curr_bss); + at76_dbg(DBG_MGMT_TIMER, + "%s:%d: starting mgmt_timer + HZ", __func__, __LINE__); + schedule_delayed_work(&priv->dwork_assoc, ASSOC_TIMEOUT); + return; } - fwe->fw_version.major = fwh->major; - fwe->fw_version.minor = fwh->minor; - fwe->fw_version.patch = fwh->patch; - fwe->fw_version.build = fwh->build; + WARN_ON(seq_nr != 2); + at76_auth_req(priv, priv->curr_bss, seq_nr + 1, resp->info_element); + at76_dbg(DBG_MGMT_TIMER, "%s:%d: starting mgmt_timer + HZ", __func__, + __LINE__); + schedule_delayed_work(&priv->dwork_auth, AUTH_TIMEOUT); +} - str = (char *)fwh + le32_to_cpu(fwh->str_offset); - fwe->intfw = (u8 *)fwh + le32_to_cpu(fwh->int_fw_offset); - fwe->intfw_size = le32_to_cpu(fwh->int_fw_len); - fwe->extfw = (u8 *)fwh + le32_to_cpu(fwh->ext_fw_offset); - fwe->extfw_size = le32_to_cpu(fwh->ext_fw_len); +static void at76_rx_mgmt_deauth(struct at76_priv *priv, + struct at76_rx_buffer *buf) +{ + struct ieee80211_disassoc *resp = + (struct ieee80211_disassoc *)buf->packet; + struct ieee80211_hdr_3addr *mgmt = &resp->header; + + at76_dbg(DBG_RX_MGMT | DBG_PROGRESS, + "%s: rx DeAuth bssid %s reason 0x%04x destination %s", + priv->netdev->name, mac2str(mgmt->addr3), + le16_to_cpu(resp->reason), mac2str(mgmt->addr1)); + + if (priv->mac_state != MAC_AUTH && priv->mac_state != MAC_ASSOC + && priv->mac_state != MAC_CONNECTED) { + printk(KERN_INFO "%s: DeAuth in state %s ignored\n", + priv->netdev->name, mac_states[priv->mac_state]); + return; + } - fwe->loaded = 1; + BUG_ON(!priv->curr_bss); - dev_printk(KERN_DEBUG, &udev->dev, - "using firmware %s (version %d.%d.%d-%d)\n", - fwe->fwname, fwh->major, fwh->minor, fwh->patch, fwh->build); + /* Not our BSSID, ignore */ + if (compare_ether_addr(mgmt->addr3, priv->curr_bss->bssid)) + return; - at76_dbg(DBG_DEVSTART, "board %u, int %d:%d, ext %d:%d", board_type, - le32_to_cpu(fwh->int_fw_offset), le32_to_cpu(fwh->int_fw_len), - le32_to_cpu(fwh->ext_fw_offset), le32_to_cpu(fwh->ext_fw_len)); - at76_dbg(DBG_DEVSTART, "firmware id %s", str); + /* Not for our STA and not broadcast, ignore */ + if (compare_ether_addr(priv->netdev->dev_addr, mgmt->addr1) + && !is_broadcast_ether_addr(mgmt->addr1)) + return; -exit: - mutex_unlock(&fw_mutex); + if (priv->mac_state == MAC_CONNECTED) + at76_iwevent_bss_disconnect(priv->netdev); - if (fwe->loaded) - return fwe; - else - return NULL; + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); + cancel_delayed_work(&priv->dwork_get_scan); + cancel_delayed_work(&priv->dwork_beacon); + cancel_delayed_work(&priv->dwork_auth); + cancel_delayed_work(&priv->dwork_assoc); } -static void at76_mac80211_tx_callback(struct urb *urb) +static void at76_rx_mgmt_beacon(struct at76_priv *priv, + struct at76_rx_buffer *buf) { - struct at76_priv *priv = urb->context; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb); + int varpar_len; + /* beacon content */ + struct ieee80211_beacon *bdata = (struct ieee80211_beacon *)buf->packet; + struct ieee80211_hdr_3addr *mgmt = &bdata->header; + + struct list_head *lptr; + struct bss_info *match; /* entry matching addr3 with its bssid */ + int new_entry = 0; + int len; + struct ieee80211_info_element *ie; + int have_ssid = 0; + int have_rates = 0; + int have_channel = 0; + int keep_going = 1; + unsigned long flags; + + spin_lock_irqsave(&priv->bss_list_spinlock, flags); + if (priv->mac_state == MAC_CONNECTED) { + /* in state MAC_CONNECTED we use the mgmt_timer to control + the beacon of the BSS */ + BUG_ON(!priv->curr_bss); + + if (!compare_ether_addr(priv->curr_bss->bssid, mgmt->addr3)) { + /* We got our AP's beacon, defer the timeout handler. + Kill pending work first, as schedule_delayed_work() + won't do it. */ + cancel_delayed_work(&priv->dwork_beacon); + schedule_delayed_work(&priv->dwork_beacon, + BEACON_TIMEOUT); + priv->curr_bss->rssi = buf->rssi; + priv->beacons_received++; + goto exit; + } + } - at76_dbg(DBG_MAC80211, "%s()", __func__); + /* look if we have this BSS already in the list */ + match = NULL; - switch (urb->status) { - case 0: - /* success */ - /* FIXME: - * is the frame really ACKed when tx_callback is called ? */ - info->flags |= IEEE80211_TX_STAT_ACK; - break; - case -ENOENT: - case -ECONNRESET: - /* fail, urb has been unlinked */ - /* FIXME: add error message */ - break; - default: - at76_dbg(DBG_URB, "%s - nonzero tx status received: %d", - __func__, urb->status); - break; + if (!list_empty(&priv->bss_list)) { + list_for_each(lptr, &priv->bss_list) { + struct bss_info *bss_ptr = + list_entry(lptr, struct bss_info, list); + if (!compare_ether_addr(bss_ptr->bssid, mgmt->addr3)) { + match = bss_ptr; + break; + } + } } - memset(&info->status, 0, sizeof(info->status)); + if (!match) { + /* BSS not in the list - append it */ + match = kzalloc(sizeof(struct bss_info), GFP_ATOMIC); + if (!match) { + at76_dbg(DBG_BSS_TABLE, + "%s: cannot kmalloc new bss info (%zd byte)", + priv->netdev->name, sizeof(struct bss_info)); + goto exit; + } + new_entry = 1; + list_add_tail(&match->list, &priv->bss_list); + } - ieee80211_tx_status_irqsafe(priv->hw, priv->tx_skb); + match->capa = le16_to_cpu(bdata->capability); + match->beacon_interval = le16_to_cpu(bdata->beacon_interval); + match->rssi = buf->rssi; + match->link_qual = buf->link_quality; + match->noise_level = buf->noise_level; + memcpy(match->bssid, mgmt->addr3, ETH_ALEN); + at76_dbg(DBG_RX_BEACON, "%s: bssid %s", priv->netdev->name, + mac2str(match->bssid)); + + ie = bdata->info_element; + + /* length of var length beacon parameters */ + varpar_len = min_t(int, le16_to_cpu(buf->wlength) - + sizeof(struct ieee80211_beacon), + BEACON_MAX_DATA_LENGTH); + + /* This routine steps through the bdata->data array to get + * some useful information about the access point. + * Currently, this implementation supports receipt of: SSID, + * supported transfer rates and channel, in any order, with some + * tolerance for intermittent unknown codes (although this + * functionality may not be necessary as the useful information will + * usually arrive in consecutively, but there have been some + * reports of some of the useful information fields arriving in a + * different order). + * It does not support any more IE types although MFIE_TYPE_TIM may + * be supported (on my AP at least). + * The bdata->data array is about 1500 bytes long but only ~36 of those + * bytes are useful, hence the have_ssid etc optimizations. */ + + while (keep_going && + ((&ie->data[ie->len] - (u8 *)bdata->info_element) <= + varpar_len)) { + + switch (ie->id) { + + case MFIE_TYPE_SSID: + if (have_ssid) + break; - priv->tx_skb = NULL; + len = min_t(int, IW_ESSID_MAX_SIZE, ie->len); - ieee80211_wake_queues(priv->hw); -} + /* we copy only if this is a new entry, + or the incoming SSID is not a hidden SSID. This + will protect us from overwriting a real SSID read + in a ProbeResponse with a hidden one from a + following beacon. */ + if (!new_entry && at76_is_hidden_ssid(ie->data, len)) { + have_ssid = 1; + break; + } -static int at76_mac80211_tx(struct ieee80211_hw *hw, struct sk_buff *skb) -{ - struct at76_priv *priv = hw->priv; - struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - int padding, submit_len, ret; + match->ssid_len = len; + memcpy(match->ssid, ie->data, len); + at76_dbg(DBG_RX_BEACON, "%s: SSID - %.*s", + priv->netdev->name, len, match->ssid); + have_ssid = 1; + break; - at76_dbg(DBG_MAC80211, "%s()", __func__); + case MFIE_TYPE_RATES: + if (have_rates) + break; - if (priv->tx_urb->status == -EINPROGRESS) { - printk(KERN_ERR "%s: %s called while tx urb is pending\n", - wiphy_name(priv->hw->wiphy), __func__); - return NETDEV_TX_BUSY; - } + match->rates_len = + min_t(int, sizeof(match->rates), ie->len); + memcpy(match->rates, ie->data, match->rates_len); + have_rates = 1; + at76_dbg(DBG_RX_BEACON, "%s: SUPPORTED RATES %s", + priv->netdev->name, + hex2str(ie->data, ie->len)); + break; - ieee80211_stop_queues(hw); + case MFIE_TYPE_DS_SET: + if (have_channel) + break; - at76_ledtrig_tx_activity(); /* tell ledtrigger we send a packet */ + match->channel = ie->data[0]; + have_channel = 1; + at76_dbg(DBG_RX_BEACON, "%s: CHANNEL - %d", + priv->netdev->name, match->channel); + break; - WARN_ON(priv->tx_skb != NULL); + case MFIE_TYPE_CF_SET: + case MFIE_TYPE_TIM: + case MFIE_TYPE_IBSS_SET: + default: + at76_dbg(DBG_RX_BEACON, "%s: beacon IE id %d len %d %s", + priv->netdev->name, ie->id, ie->len, + hex2str(ie->data, ie->len)); + break; + } - priv->tx_skb = skb; - padding = at76_calc_padding(skb->len); - submit_len = AT76_TX_HDRLEN + skb->len + padding; + /* advance to the next informational element */ + next_ie(&ie); - /* setup 'Atmel' header */ - memset(tx_buffer, 0, sizeof(*tx_buffer)); - tx_buffer->padding = padding; - tx_buffer->wlength = cpu_to_le16(skb->len); - tx_buffer->tx_rate = ieee80211_get_tx_rate(hw, info)->hw_value; - if (FIRMWARE_IS_WPA(priv->fw_version) && info->control.hw_key) { - tx_buffer->key_id = (info->control.hw_key->keyidx); - tx_buffer->cipher_type = - priv->keys[info->control.hw_key->keyidx].cipher; - tx_buffer->cipher_length = - priv->keys[info->control.hw_key->keyidx].keylen; - tx_buffer->reserved = 0; - } else { - tx_buffer->key_id = 0; - tx_buffer->cipher_type = 0; - tx_buffer->cipher_length = 0; - tx_buffer->reserved = 0; - }; - /* memset(tx_buffer->reserved, 0, sizeof(tx_buffer->reserved)); */ - memcpy(tx_buffer->packet, skb->data, skb->len); + /* Optimization: after all, the bdata->data array is + * varpar_len bytes long, whereas we get all of the useful + * information after only ~36 bytes, this saves us a lot of + * time (and trouble as the remaining portion of the array + * could be full of junk) + * Comment this out if you want to see what other information + * comes from the AP - although little of it may be useful */ + } - at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr", - wiphy_name(priv->hw->wiphy), le16_to_cpu(tx_buffer->wlength), - tx_buffer->padding, tx_buffer->tx_rate); + at76_dbg(DBG_RX_BEACON, "%s: Finished processing beacon data", + priv->netdev->name); - /* send stuff */ - at76_dbg_dump(DBG_TX_DATA_CONTENT, tx_buffer, submit_len, - "%s(): tx_buffer %d bytes:", __func__, submit_len); - usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, tx_buffer, - submit_len, at76_mac80211_tx_callback, priv); - ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC); - if (ret) { - printk(KERN_ERR "%s: error in tx submit urb: %d\n", - wiphy_name(priv->hw->wiphy), ret); - if (ret == -EINVAL) - printk(KERN_ERR - "%s: -EINVAL: tx urb %p hcpriv %p complete %p\n", - wiphy_name(priv->hw->wiphy), priv->tx_urb, - priv->tx_urb->hcpriv, priv->tx_urb->complete); - } + match->last_rx = jiffies; /* record last rx of beacon */ - return 0; +exit: + spin_unlock_irqrestore(&priv->bss_list_spinlock, flags); } -static int at76_mac80211_start(struct ieee80211_hw *hw) +/* Calculate the link level from a given rx_buffer */ +static void at76_calc_level(struct at76_priv *priv, struct at76_rx_buffer *buf, + struct iw_quality *qual) { - struct at76_priv *priv = hw->priv; - int ret; - - at76_dbg(DBG_MAC80211, "%s()", __func__); + /* just a guess for now, might be different for other chips */ + int max_rssi = 42; - mutex_lock(&priv->mtx); - - ret = at76_submit_rx_urb(priv); - if (ret < 0) { - printk(KERN_ERR "%s: open: submit_rx_urb failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); - goto error; - } + qual->level = (buf->rssi * 100 / max_rssi); + if (qual->level > 100) + qual->level = 100; + qual->updated |= IW_QUAL_LEVEL_UPDATED; +} - at76_startup_device(priv); +/* Calculate the link quality from a given rx_buffer */ +static void at76_calc_qual(struct at76_priv *priv, struct at76_rx_buffer *buf, + struct iw_quality *qual) +{ + if (at76_is_intersil(priv->board_type)) + qual->qual = buf->link_quality; + else { + unsigned long elapsed; - at76_start_monitor(priv); + /* Update qual at most once a second */ + elapsed = jiffies - priv->beacons_last_qual; + if (elapsed < 1 * HZ) + return; -error: - mutex_unlock(&priv->mtx); + qual->qual = qual->level * priv->beacons_received * + msecs_to_jiffies(priv->beacon_period) / elapsed; - return 0; + priv->beacons_last_qual = jiffies; + priv->beacons_received = 0; + } + qual->qual = (qual->qual > 100) ? 100 : qual->qual; + qual->updated |= IW_QUAL_QUAL_UPDATED; } -static void at76_mac80211_stop(struct ieee80211_hw *hw) +/* Calculate the noise quality from a given rx_buffer */ +static void at76_calc_noise(struct at76_priv *priv, struct at76_rx_buffer *buf, + struct iw_quality *qual) { - struct at76_priv *priv = hw->priv; - - at76_dbg(DBG_MAC80211, "%s()", __func__); - - mutex_lock(&priv->mtx); + qual->noise = 0; + qual->updated |= IW_QUAL_NOISE_INVALID; +} - if (!priv->device_unplugged) { - /* We are called by "ifconfig ethX down", not because the - * device is not available anymore. */ - if (at76_set_radio(priv, 0) == 1) - at76_wait_completion(priv, CMD_RADIO_ON); +static void at76_update_wstats(struct at76_priv *priv, + struct at76_rx_buffer *buf) +{ + struct iw_quality *qual = &priv->wstats.qual; - /* We unlink rx_urb because at76_open() re-submits it. - * If unplugged, at76_delete_device() takes care of it. */ - usb_kill_urb(priv->rx_urb); + if (buf->rssi && priv->mac_state == MAC_CONNECTED) { + qual->updated = 0; + at76_calc_level(priv, buf, qual); + at76_calc_qual(priv, buf, qual); + at76_calc_noise(priv, buf, qual); + } else { + qual->qual = 0; + qual->level = 0; + qual->noise = 0; + qual->updated = IW_QUAL_ALL_INVALID; } - - mutex_unlock(&priv->mtx); } -static int at76_add_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) +static void at76_rx_mgmt(struct at76_priv *priv, struct at76_rx_buffer *buf) { - struct at76_priv *priv = hw->priv; - int ret = 0; + struct ieee80211_hdr_3addr *mgmt = + (struct ieee80211_hdr_3addr *)buf->packet; + u16 framectl = le16_to_cpu(mgmt->frame_ctl); + + /* update wstats */ + if (priv->mac_state != MAC_INIT && priv->mac_state != MAC_SCANNING) { + /* jal: this is a dirty hack needed by Tim in ad-hoc mode */ + /* Data packets always seem to have a 0 link level, so we + only read link quality info from management packets. + Atmel driver actually averages the present, and previous + values, we just present the raw value at the moment - TJS */ + if (priv->iw_mode == IW_MODE_ADHOC + || (priv->curr_bss + && !compare_ether_addr(mgmt->addr3, + priv->curr_bss->bssid))) + at76_update_wstats(priv, buf); + } - at76_dbg(DBG_MAC80211, "%s()", __func__); + at76_dbg(DBG_RX_MGMT_CONTENT, "%s rx mgmt framectl 0x%x %s", + priv->netdev->name, framectl, + hex2str(mgmt, le16_to_cpu(buf->wlength))); - mutex_lock(&priv->mtx); + switch (framectl & IEEE80211_FCTL_STYPE) { + case IEEE80211_STYPE_BEACON: + case IEEE80211_STYPE_PROBE_RESP: + at76_rx_mgmt_beacon(priv, buf); + break; + + case IEEE80211_STYPE_ASSOC_RESP: + at76_rx_mgmt_assoc(priv, buf); + break; - switch (conf->type) { - case NL80211_IFTYPE_STATION: - priv->iw_mode = IW_MODE_INFRA; + case IEEE80211_STYPE_DISASSOC: + at76_rx_mgmt_disassoc(priv, buf); break; + + case IEEE80211_STYPE_AUTH: + at76_rx_mgmt_auth(priv, buf); + break; + + case IEEE80211_STYPE_DEAUTH: + at76_rx_mgmt_deauth(priv, buf); + break; + default: - ret = -EOPNOTSUPP; - goto exit; + printk(KERN_DEBUG "%s: ignoring frame with framectl 0x%04x\n", + priv->netdev->name, framectl); } -exit: - mutex_unlock(&priv->mtx); - - return ret; + return; } -static void at76_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) +/* Convert the 802.11 header into an ethernet-style header, make skb + * ready for consumption by netif_rx() */ +static void at76_ieee80211_to_eth(struct sk_buff *skb, int iw_mode) { - at76_dbg(DBG_MAC80211, "%s()", __func__); -} + struct ieee80211_hdr_3addr *i802_11_hdr; + struct ethhdr *eth_hdr_p; + u8 *src_addr; + u8 *dest_addr; -static int at76_join(struct at76_priv *priv) -{ - struct at76_req_join join; - int ret; + i802_11_hdr = (struct ieee80211_hdr_3addr *)skb->data; - memset(&join, 0, sizeof(struct at76_req_join)); - memcpy(join.essid, priv->essid, priv->essid_size); - join.essid_size = priv->essid_size; - memcpy(join.bssid, priv->bssid, ETH_ALEN); - join.bss_type = INFRASTRUCTURE_MODE; - join.channel = priv->channel; - join.timeout = cpu_to_le16(2000); + /* That would be the ethernet header if the hardware converted + * the frame for us. Make sure the source and the destination + * match the 802.11 header. Which hardware does it? */ + eth_hdr_p = (struct ethhdr *)skb_pull(skb, IEEE80211_3ADDR_LEN); - at76_dbg(DBG_MAC80211, "%s: sending CMD_JOIN", __func__); - ret = at76_set_card_command(priv->udev, CMD_JOIN, &join, - sizeof(struct at76_req_join)); + dest_addr = i802_11_hdr->addr1; + if (iw_mode == IW_MODE_ADHOC) + src_addr = i802_11_hdr->addr2; + else + src_addr = i802_11_hdr->addr3; - if (ret < 0) { - printk(KERN_ERR "%s: at76_set_card_command failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); - return 0; - } + if (!compare_ether_addr(eth_hdr_p->h_source, src_addr) && + !compare_ether_addr(eth_hdr_p->h_dest, dest_addr)) + /* Yes, we already have an ethernet header */ + skb_reset_mac_header(skb); + else { + u16 len; + + /* Need to build an ethernet header */ + if (!memcmp(skb->data, snapsig, sizeof(snapsig))) { + /* SNAP frame - decapsulate, keep proto */ + skb_push(skb, offsetof(struct ethhdr, h_proto) - + sizeof(rfc1042sig)); + len = 0; + } else { + /* 802.3 frame, proto is length */ + len = skb->len; + skb_push(skb, ETH_HLEN); + } - ret = at76_wait_completion(priv, CMD_JOIN); - at76_dbg(DBG_MAC80211, "%s: CMD_JOIN returned: 0x%02x", __func__, ret); - if (ret != CMD_STATUS_COMPLETE) { - printk(KERN_ERR "%s: at76_wait_completion failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); - return 0; + skb_reset_mac_header(skb); + eth_hdr_p = eth_hdr(skb); + /* This needs to be done in this order (eth_hdr_p->h_dest may + * overlap src_addr) */ + memcpy(eth_hdr_p->h_source, src_addr, ETH_ALEN); + memcpy(eth_hdr_p->h_dest, dest_addr, ETH_ALEN); + if (len) + eth_hdr_p->h_proto = htons(len); } - at76_set_tkip_bssid(priv, priv->bssid); - at76_set_pm_mode(priv); - - return 0; + skb->protocol = eth_type_trans(skb, skb->dev); } -static void at76_dwork_hw_scan(struct work_struct *work) +/* Check for fragmented data in priv->rx_skb. If the packet was no fragment + or it was the last of a fragment set a skb containing the whole packet + is returned for further processing. Otherwise we get NULL and are + done and the packet is either stored inside the fragment buffer + or thrown away. Every returned skb starts with the ieee802_11 header + and contains _no_ FCS at the end */ +static struct sk_buff *at76_check_for_rx_frags(struct at76_priv *priv) { - struct at76_priv *priv = container_of(work, struct at76_priv, - dwork_hw_scan.work); - int ret; + struct sk_buff *skb = priv->rx_skb; + struct at76_rx_buffer *buf = (struct at76_rx_buffer *)skb->data; + struct ieee80211_hdr_3addr *i802_11_hdr = + (struct ieee80211_hdr_3addr *)buf->packet; + /* seq_ctrl, fragment_number, sequence number of new packet */ + u16 sctl = le16_to_cpu(i802_11_hdr->seq_ctl); + u16 fragnr = sctl & 0xf; + u16 seqnr = sctl >> 4; + u16 frame_ctl = le16_to_cpu(i802_11_hdr->frame_ctl); - ret = at76_get_cmd_status(priv->udev, CMD_SCAN); - at76_dbg(DBG_MAC80211, "%s: CMD_SCAN status 0x%02x", __func__, ret); + /* Length including the IEEE802.11 header, but without the trailing + * FCS and without the Atmel Rx header */ + int length = le16_to_cpu(buf->wlength) - IEEE80211_FCS_LEN; - /* FIXME: add maximum time for scan to complete */ + /* where does the data payload start in skb->data ? */ + u8 *data = i802_11_hdr->payload; - if (ret != CMD_STATUS_COMPLETE) { - queue_delayed_work(priv->hw->workqueue, &priv->dwork_hw_scan, - SCAN_POLL_INTERVAL); - goto exit; + /* length of payload, excl. the trailing FCS */ + int data_len = length - IEEE80211_3ADDR_LEN; + + int i; + struct rx_data_buf *bptr, *optr; + unsigned long oldest = ~0UL; + + at76_dbg(DBG_RX_FRAGS, + "%s: rx data frame_ctl %04x addr2 %s seq/frag %d/%d " + "length %d data %d: %s ...", priv->netdev->name, frame_ctl, + mac2str(i802_11_hdr->addr2), seqnr, fragnr, length, data_len, + hex2str(data, 32)); + + at76_dbg(DBG_RX_FRAGS_SKB, "%s: incoming skb: head %p data %p " + "tail %p end %p len %d", priv->netdev->name, skb->head, + skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), + skb->len); + + if (data_len < 0) { + /* make sure data starts in the buffer */ + printk(KERN_INFO "%s: data frame too short\n", + priv->netdev->name); + return NULL; } - ieee80211_scan_completed(priv->hw); + WARN_ON(length <= AT76_RX_HDRLEN); + if (length <= AT76_RX_HDRLEN) + return NULL; - if (is_valid_ether_addr(priv->bssid)) { - ieee80211_wake_queues(priv->hw); - at76_join(priv); + /* remove the at76_rx_buffer header - we don't need it anymore */ + /* we need the IEEE802.11 header (for the addresses) if this packet + is the first of a chain */ + skb_pull(skb, AT76_RX_HDRLEN); + + /* remove FCS at end */ + skb_trim(skb, length); + + at76_dbg(DBG_RX_FRAGS_SKB, "%s: trimmed skb: head %p data %p tail %p " + "end %p len %d data %p data_len %d", priv->netdev->name, + skb->head, skb->data, skb_tail_pointer(skb), + skb_end_pointer(skb), skb->len, data, data_len); + + if (fragnr == 0 && !(frame_ctl & IEEE80211_FCTL_MOREFRAGS)) { + /* unfragmented packet received */ + /* Use a new skb for the next receive */ + priv->rx_skb = NULL; + at76_dbg(DBG_RX_FRAGS, "%s: unfragmented", priv->netdev->name); + return skb; } - ieee80211_wake_queues(priv->hw); + /* look if we've got a chain for the sender address. + afterwards optr points to first free or the oldest entry, + or, if i < NR_RX_DATA_BUF, bptr points to the entry for the + sender address */ + /* determining the oldest entry doesn't cope with jiffies wrapping + but I don't care to delete a young entry at these rare moments ... */ + + bptr = priv->rx_data; + optr = NULL; + for (i = 0; i < NR_RX_DATA_BUF; i++, bptr++) { + if (!bptr->skb) { + optr = bptr; + oldest = 0UL; + continue; + } -exit: - return; -} + if (!compare_ether_addr(i802_11_hdr->addr2, bptr->sender)) + break; -static int at76_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len) -{ - struct at76_priv *priv = hw->priv; - struct at76_req_scan scan; - int ret; + if (!optr) { + optr = bptr; + oldest = bptr->last_rx; + } else if (bptr->last_rx < oldest) + optr = bptr; + } - at76_dbg(DBG_MAC80211, "%s():", __func__); - at76_dbg_dump(DBG_MAC80211, ssid, len, "ssid %zd bytes:", len); + if (i < NR_RX_DATA_BUF) { + + at76_dbg(DBG_RX_FRAGS, "%s: %d. cacheentry (seq/frag = %d/%d) " + "matched sender addr", + priv->netdev->name, i, bptr->seqnr, bptr->fragnr); + + /* bptr points to an entry for the sender address */ + if (bptr->seqnr == seqnr) { + int left; + /* the fragment has the current sequence number */ + if (((bptr->fragnr + 1) & 0xf) != fragnr) { + /* wrong fragment number -> ignore it */ + /* is & 0xf necessary above ??? */ + at76_dbg(DBG_RX_FRAGS, + "%s: frag nr mismatch: %d + 1 != %d", + priv->netdev->name, bptr->fragnr, + fragnr); + return NULL; + } + bptr->last_rx = jiffies; + /* the next following fragment number -> + add the data at the end */ + + /* for test only ??? */ + left = skb_tailroom(bptr->skb); + if (left < data_len) + printk(KERN_INFO + "%s: only %d byte free (need %d)\n", + priv->netdev->name, left, data_len); + else + memcpy(skb_put(bptr->skb, data_len), data, + data_len); + + bptr->fragnr = fragnr; + if (frame_ctl & IEEE80211_FCTL_MOREFRAGS) + return NULL; + + /* this was the last fragment - send it */ + skb = bptr->skb; + bptr->skb = NULL; /* free the entry */ + at76_dbg(DBG_RX_FRAGS, "%s: last frag of seq %d", + priv->netdev->name, seqnr); + return skb; + } - mutex_lock(&priv->mtx); + /* got another sequence number */ + if (fragnr == 0) { + /* it's the start of a new chain - replace the + old one by this */ + /* bptr->sender has the correct value already */ + at76_dbg(DBG_RX_FRAGS, + "%s: start of new seq %d, removing old seq %d", + priv->netdev->name, seqnr, bptr->seqnr); + bptr->seqnr = seqnr; + bptr->fragnr = 0; + bptr->last_rx = jiffies; + /* swap bptr->skb and priv->rx_skb */ + skb = bptr->skb; + bptr->skb = priv->rx_skb; + priv->rx_skb = skb; + } else { + /* it from the middle of a new chain -> + delete the old entry and skip the new one */ + at76_dbg(DBG_RX_FRAGS, + "%s: middle of new seq %d (%d) " + "removing old seq %d", + priv->netdev->name, seqnr, fragnr, + bptr->seqnr); + dev_kfree_skb(bptr->skb); + bptr->skb = NULL; + } + return NULL; + } - ieee80211_stop_queues(hw); + /* if we didn't find a chain for the sender address, optr + points either to the first free or the oldest entry */ - memset(&scan, 0, sizeof(struct at76_req_scan)); - memset(scan.bssid, 0xFF, ETH_ALEN); - scan.scan_type = SCAN_TYPE_ACTIVE; - if (priv->essid_size > 0) { - memcpy(scan.essid, ssid, len); - scan.essid_size = len; + if (fragnr != 0) { + /* this is not the begin of a fragment chain ... */ + at76_dbg(DBG_RX_FRAGS, + "%s: no chain for non-first fragment (%d)", + priv->netdev->name, fragnr); + return NULL; } - scan.min_channel_time = cpu_to_le16(priv->scan_min_time); - scan.max_channel_time = cpu_to_le16(priv->scan_max_time); - scan.probe_delay = cpu_to_le16(priv->scan_min_time * 1000); - scan.international_scan = 0; - at76_dbg(DBG_MAC80211, "%s: sending CMD_SCAN", __func__); - ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan)); + BUG_ON(!optr); + if (optr->skb) { + /* swap the skb's */ + skb = optr->skb; + optr->skb = priv->rx_skb; + priv->rx_skb = skb; - if (ret < 0) { - err("CMD_SCAN failed: %d", ret); - goto exit; - } + at76_dbg(DBG_RX_FRAGS, + "%s: free old contents: sender %s seq/frag %d/%d", + priv->netdev->name, mac2str(optr->sender), + optr->seqnr, optr->fragnr); - queue_delayed_work(priv->hw->workqueue, &priv->dwork_hw_scan, - SCAN_POLL_INTERVAL); + } else { + /* take the skb from priv->rx_skb */ + optr->skb = priv->rx_skb; + /* let at76_submit_rx_urb() allocate a new skb */ + priv->rx_skb = NULL; -exit: - mutex_unlock(&priv->mtx); + at76_dbg(DBG_RX_FRAGS, "%s: use a free entry", + priv->netdev->name); + } + memcpy(optr->sender, i802_11_hdr->addr2, ETH_ALEN); + optr->seqnr = seqnr; + optr->fragnr = 0; + optr->last_rx = jiffies; - return 0; + return NULL; } -static int at76_config(struct ieee80211_hw *hw, u32 changed) +/* Rx interrupt: we expect the complete data buffer in priv->rx_skb */ +static void at76_rx_data(struct at76_priv *priv) { - struct at76_priv *priv = hw->priv; - struct ieee80211_conf *conf = &hw->conf; + struct net_device *netdev = priv->netdev; + struct net_device_stats *stats = &priv->stats; + struct sk_buff *skb = priv->rx_skb; + struct at76_rx_buffer *buf = (struct at76_rx_buffer *)skb->data; + struct ieee80211_hdr_3addr *i802_11_hdr; + int length = le16_to_cpu(buf->wlength); - at76_dbg(DBG_MAC80211, "%s(): channel %d radio %d", - __func__, conf->channel->hw_value, conf->radio_enabled); - at76_dbg_dump(DBG_MAC80211, priv->essid, priv->essid_size, "ssid:"); - at76_dbg_dump(DBG_MAC80211, priv->bssid, ETH_ALEN, "bssid:"); + at76_dbg(DBG_RX_DATA, "%s received data packet: %s", netdev->name, + hex2str(skb->data, AT76_RX_HDRLEN)); - mutex_lock(&priv->mtx); + at76_dbg(DBG_RX_DATA_CONTENT, "rx packet: %s", + hex2str(skb->data + AT76_RX_HDRLEN, length)); - priv->channel = conf->channel->hw_value; + skb = at76_check_for_rx_frags(priv); + if (!skb) + return; - if (is_valid_ether_addr(priv->bssid)) { - at76_join(priv); - ieee80211_wake_queues(priv->hw); - } else { - ieee80211_stop_queues(priv->hw); - at76_start_monitor(priv); - }; + /* Atmel header and the FCS are already removed */ + i802_11_hdr = (struct ieee80211_hdr_3addr *)skb->data; - mutex_unlock(&priv->mtx); + skb->dev = netdev; + skb->ip_summed = CHECKSUM_NONE; /* TODO: should check CRC */ - return 0; -} + if (is_broadcast_ether_addr(i802_11_hdr->addr1)) { + if (!compare_ether_addr(i802_11_hdr->addr1, netdev->broadcast)) + skb->pkt_type = PACKET_BROADCAST; + else + skb->pkt_type = PACKET_MULTICAST; + } else if (compare_ether_addr(i802_11_hdr->addr1, netdev->dev_addr)) + skb->pkt_type = PACKET_OTHERHOST; -static int at76_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct at76_priv *priv = hw->priv; + at76_ieee80211_to_eth(skb, priv->iw_mode); - at76_dbg_dump(DBG_MAC80211, conf->bssid, ETH_ALEN, "bssid:"); + netdev->last_rx = jiffies; + netif_rx(skb); + stats->rx_packets++; + stats->rx_bytes += length; - mutex_lock(&priv->mtx); + return; +} - memcpy(priv->bssid, conf->bssid, ETH_ALEN); -// memcpy(priv->essid, conf->ssid, conf->ssid_len); -// priv->essid_size = conf->ssid_len; +static void at76_rx_monitor_mode(struct at76_priv *priv) +{ + struct at76_rx_radiotap *rt; + u8 *payload; + int skblen; + struct net_device *netdev = priv->netdev; + struct at76_rx_buffer *buf = + (struct at76_rx_buffer *)priv->rx_skb->data; + /* length including the IEEE802.11 header and the trailing FCS, + but not at76_rx_buffer */ + int length = le16_to_cpu(buf->wlength); + struct sk_buff *skb = priv->rx_skb; + struct net_device_stats *stats = &priv->stats; - if (is_valid_ether_addr(priv->bssid)) { - /* mac80211 is joining a bss */ - ieee80211_wake_queues(priv->hw); - at76_join(priv); - } else - ieee80211_stop_queues(priv->hw); + if (length < IEEE80211_FCS_LEN) { + /* buffer contains no data */ + at76_dbg(DBG_MONITOR_MODE, + "%s: MONITOR MODE: rx skb without data", + priv->netdev->name); + return; + } - mutex_unlock(&priv->mtx); + skblen = sizeof(struct at76_rx_radiotap) + length; - return 0; + skb = dev_alloc_skb(skblen); + if (!skb) { + printk(KERN_ERR "%s: MONITOR MODE: dev_alloc_skb for radiotap " + "header returned NULL\n", priv->netdev->name); + return; + } + + skb_put(skb, skblen); + + rt = (struct at76_rx_radiotap *)skb->data; + payload = skb->data + sizeof(struct at76_rx_radiotap); + + rt->rt_hdr.it_version = 0; + rt->rt_hdr.it_pad = 0; + rt->rt_hdr.it_len = cpu_to_le16(sizeof(struct at76_rx_radiotap)); + rt->rt_hdr.it_present = cpu_to_le32(AT76_RX_RADIOTAP_PRESENT); + + rt->rt_tsft = cpu_to_le64(le32_to_cpu(buf->rx_time)); + rt->rt_rate = hw_rates[buf->rx_rate] & (~0x80); + rt->rt_signal = buf->rssi; + rt->rt_noise = buf->noise_level; + rt->rt_flags = IEEE80211_RADIOTAP_F_FCS; + if (buf->fragmentation) + rt->rt_flags |= IEEE80211_RADIOTAP_F_FRAG; + + memcpy(payload, buf->packet, length); + skb->dev = netdev; + skb->ip_summed = CHECKSUM_NONE; + skb_reset_mac_header(skb); + skb->pkt_type = PACKET_OTHERHOST; + skb->protocol = htons(ETH_P_802_2); + + netdev->last_rx = jiffies; + netif_rx(skb); + stats->rx_packets++; + stats->rx_bytes += length; } -/* must be atomic */ -static void at76_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, int mc_count, - struct dev_addr_list *mc_list) +/* Check if we spy on the sender address in buf and update stats */ +static void at76_iwspy_update(struct at76_priv *priv, + struct at76_rx_buffer *buf) { - struct at76_priv *priv = hw->priv; - int flags; - - at76_dbg(DBG_MAC80211, "%s(): changed_flags=0x%08x " - "total_flags=0x%08x mc_count=%d", - __func__, changed_flags, *total_flags, mc_count); + struct ieee80211_hdr_3addr *hdr = + (struct ieee80211_hdr_3addr *)buf->packet; + struct iw_quality qual; - flags = changed_flags & AT76_SUPPORTED_FILTERS; - *total_flags = AT76_SUPPORTED_FILTERS; + /* We can only set the level here */ + qual.updated = IW_QUAL_QUAL_INVALID | IW_QUAL_NOISE_INVALID; + qual.level = 0; + qual.noise = 0; + at76_calc_level(priv, buf, &qual); - /* FIXME: access to priv->promisc should be protected with - * priv->mtx, but it's impossible because this function needs to be - * atomic */ + spin_lock_bh(&priv->spy_spinlock); - if (flags && !priv->promisc) { - /* mac80211 wants us to enable promiscuous mode */ - priv->promisc = 1; - } else if (!flags && priv->promisc) { - /* we need to disable promiscuous mode */ - priv->promisc = 0; - } else - return; + if (priv->spy_data.spy_number > 0) + wireless_spy_update(priv->netdev, hdr->addr2, &qual); - queue_work(hw->workqueue, &priv->work_set_promisc); + spin_unlock_bh(&priv->spy_spinlock); } -static int at76_set_key_oldfw(struct ieee80211_hw *hw, enum set_key_cmd cmd, - const u8 *local_address, const u8 *address, - struct ieee80211_key_conf *key) +static void at76_rx_tasklet(unsigned long param) { - struct at76_priv *priv = hw->priv; - - int i; - - at76_dbg(DBG_MAC80211, "%s(): cmd %d key->alg %d key->keyidx %d " - "key->keylen %d", - __func__, cmd, key->alg, key->keyidx, key->keylen); + struct urb *urb = (struct urb *)param; + struct at76_priv *priv = urb->context; + struct net_device *netdev = priv->netdev; + struct at76_rx_buffer *buf; + struct ieee80211_hdr_3addr *i802_11_hdr; + u16 frame_ctl; - if (key->alg != ALG_WEP) - return -EOPNOTSUPP; + if (priv->device_unplugged) { + at76_dbg(DBG_DEVSTART, "device unplugged"); + if (urb) + at76_dbg(DBG_DEVSTART, "urb status %d", urb->status); + return; + } - key->hw_key_idx = key->keyidx; + if (!priv->rx_skb || !netdev || !priv->rx_skb->data) + return; - mutex_lock(&priv->mtx); + buf = (struct at76_rx_buffer *)priv->rx_skb->data; - switch (cmd) { - case SET_KEY: - memcpy(priv->wep_keys[key->keyidx], key->key, key->keylen); - priv->wep_keys_len[key->keyidx] = key->keylen; + i802_11_hdr = (struct ieee80211_hdr_3addr *)buf->packet; - /* FIXME: find out how to do this properly */ - priv->wep_key_id = key->keyidx; + frame_ctl = le16_to_cpu(i802_11_hdr->frame_ctl); - break; - case DISABLE_KEY: - default: - priv->wep_keys_len[key->keyidx] = 0; - break; + if (urb->status != 0) { + if (urb->status != -ENOENT && urb->status != -ECONNRESET) + at76_dbg(DBG_URB, + "%s %s: - nonzero Rx bulk status received: %d", + __func__, netdev->name, urb->status); + return; } - priv->wep_enabled = 0; + at76_dbg(DBG_RX_ATMEL_HDR, + "%s: rx frame: rate %d rssi %d noise %d link %d %s", + priv->netdev->name, buf->rx_rate, buf->rssi, buf->noise_level, + buf->link_quality, hex2str(i802_11_hdr, 48)); + if (priv->iw_mode == IW_MODE_MONITOR) { + at76_rx_monitor_mode(priv); + goto exit; + } - for (i = 0; i < WEP_KEYS; i++) { - if (priv->wep_keys_len[i] != 0) - priv->wep_enabled = 1; + /* there is a new bssid around, accept it: */ + if (buf->newbss && priv->iw_mode == IW_MODE_ADHOC) { + at76_dbg(DBG_PROGRESS, "%s: rx newbss", netdev->name); + schedule_work(&priv->work_new_bss); } - at76_startup_device(priv); + switch (frame_ctl & IEEE80211_FCTL_FTYPE) { + case IEEE80211_FTYPE_DATA: + at76_rx_data(priv); + break; - mutex_unlock(&priv->mtx); + case IEEE80211_FTYPE_MGMT: + /* jal: TODO: find out if we can update iwspy also on + other frames than management (might depend on the + radio chip / firmware version !) */ - return 0; -} + at76_iwspy_update(priv, buf); -static int at76_set_key_newfw(struct ieee80211_hw *hw, enum set_key_cmd cmd, - const u8 *local_address, const u8 *address, - struct ieee80211_key_conf *key) -{ - struct at76_priv *priv = hw->priv; - int ret = -EOPNOTSUPP; - - at76_dbg(DBG_MAC80211, "%s(): cmd %d key->alg %d key->keyidx %d " - "key->keylen %d", - __func__, cmd, key->alg, key->keyidx, key->keylen); + at76_rx_mgmt(priv, buf); + break; - mutex_lock(&priv->mtx); + case IEEE80211_FTYPE_CTL: + at76_dbg(DBG_RX_CTRL, "%s: ignored ctrl frame: %04x", + priv->netdev->name, frame_ctl); + break; - priv->mib_buf.type = MIB_MAC_ENCRYPTION; + default: + printk(KERN_DEBUG "%s: ignoring frame with framectl 0x%04x\n", + priv->netdev->name, frame_ctl); + } +exit: + at76_submit_rx_urb(priv); +} - if (cmd == DISABLE_KEY) { - priv->mib_buf.size = CIPHER_KEY_LEN; - priv->mib_buf.index = offsetof(struct mib_mac_encryption, - cipher_default_keyvalue[key->keyidx]); - memset(priv->mib_buf.data.data, 0, CIPHER_KEY_LEN); - if (at76_set_mib(priv, &priv->mib_buf) != CMD_STATUS_COMPLETE) - ret = -EOPNOTSUPP; /* -EIO would be probably better */ - else { +/* Load firmware into kernel memory and parse it */ +static struct fwentry *at76_load_firmware(struct usb_device *udev, + enum board_type board_type) +{ + int ret; + char *str; + struct at76_fw_header *fwh; + struct fwentry *fwe = &firmwares[board_type]; - priv->keys[key->keyidx].cipher = CIPHER_NONE; - priv->keys[key->keyidx].keylen = 0; - }; - if (priv->default_group_key == key->keyidx) - priv->default_group_key = 0xff; + mutex_lock(&fw_mutex); - if (priv->default_pairwise_key == key->keyidx) - priv->default_pairwise_key = 0xff; - /* If default pairwise key is removed, fall back to - * group key? */ - ret = 0; + if (fwe->loaded) { + at76_dbg(DBG_FW, "re-using previously loaded fw"); goto exit; - }; - - if (cmd == SET_KEY) { - /* store key into MIB */ - priv->mib_buf.size = CIPHER_KEY_LEN; - priv->mib_buf.index = offsetof(struct mib_mac_encryption, - cipher_default_keyvalue[key->keyidx]); - memset(priv->mib_buf.data.data, 0, CIPHER_KEY_LEN); - memcpy(priv->mib_buf.data.data, key->key, key->keylen); - - switch (key->alg) { - case ALG_WEP: - if (key->keylen == 5) { - priv->keys[key->keyidx].cipher = - CIPHER_WEP64; - priv->keys[key->keyidx].keylen = 8; - } else if (key->keylen == 13) { - priv->keys[key->keyidx].cipher = - CIPHER_WEP128; - /* Firmware needs this */ - priv->keys[key->keyidx].keylen = 8; - } else { - ret = -EOPNOTSUPP; - goto exit; - }; - break; - case ALG_TKIP: - key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; - priv->keys[key->keyidx].cipher = CIPHER_TKIP; - priv->keys[key->keyidx].keylen = 12; - break; + } - case ALG_CCMP: - if (!at76_is_505a(priv->board_type)) { - ret = -EOPNOTSUPP; - goto exit; - }; - key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; - priv->keys[key->keyidx].cipher = CIPHER_CCMP; - priv->keys[key->keyidx].keylen = 16; - break; + at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname); + ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev); + if (ret < 0) { + dev_printk(KERN_ERR, &udev->dev, "firmware %s not found!\n", + fwe->fwname); + dev_printk(KERN_ERR, &udev->dev, + "you may need to download the firmware from " + "http://developer.berlios.de/projects/at76c503a/"); + goto exit; + } - default: - ret = -EOPNOTSUPP; - goto exit; - }; - - priv->mib_buf.data.data[38] = priv->keys[key->keyidx].cipher; - priv->mib_buf.data.data[39] = 1; /* Taken from atmelwlandriver, - not documented */ - - if (is_valid_ether_addr(address)) - /* Pairwise key */ - priv->mib_buf.data.data[39] |= (KEY_PAIRWISE | KEY_TX); - else if (is_broadcast_ether_addr(address)) - /* Group key */ - priv->mib_buf.data.data[39] |= (KEY_TX); - else /* Key used only for transmission ??? */ - priv->mib_buf.data.data[39] |= (KEY_TX); - - if (at76_set_mib(priv, &priv->mib_buf) != - CMD_STATUS_COMPLETE) { - ret = -EOPNOTSUPP; /* -EIO would be probably better */ - goto exit; - }; + at76_dbg(DBG_FW, "got it."); + fwh = (struct at76_fw_header *)(fwe->fw->data); - if ((key->alg == ALG_TKIP) || (key->alg == ALG_CCMP)) - at76_reset_rsc(priv); + if (fwe->fw->size <= sizeof(*fwh)) { + dev_printk(KERN_ERR, &udev->dev, + "firmware is too short (0x%zx)\n", fwe->fw->size); + goto exit; + } - key->hw_key_idx = key->keyidx; + /* CRC currently not checked */ + fwe->board_type = le32_to_cpu(fwh->board_type); + if (fwe->board_type != board_type) { + dev_printk(KERN_ERR, &udev->dev, + "board type mismatch, requested %u, got %u\n", + board_type, fwe->board_type); + goto exit; + } - /* Set up default keys */ - if (is_broadcast_ether_addr(address)) - priv->default_group_key = key->keyidx; - if (is_valid_ether_addr(address)) - priv->default_pairwise_key = key->keyidx; + fwe->fw_version.major = fwh->major; + fwe->fw_version.minor = fwh->minor; + fwe->fw_version.patch = fwh->patch; + fwe->fw_version.build = fwh->build; - /* Set up encryption MIBs */ + str = (char *)fwh + le32_to_cpu(fwh->str_offset); + fwe->intfw = (u8 *)fwh + le32_to_cpu(fwh->int_fw_offset); + fwe->intfw_size = le32_to_cpu(fwh->int_fw_len); + fwe->extfw = (u8 *)fwh + le32_to_cpu(fwh->ext_fw_offset); + fwe->extfw_size = le32_to_cpu(fwh->ext_fw_len); - /* first block of settings */ - priv->mib_buf.size = 3; - priv->mib_buf.index = offsetof(struct mib_mac_encryption, - privacy_invoked); - priv->mib_buf.data.data[0] = 1; /* privacy_invoked */ - priv->mib_buf.data.data[1] = priv->default_pairwise_key; - priv->mib_buf.data.data[2] = priv->default_group_key; + fwe->loaded = 1; - ret = at76_set_mib(priv, &priv->mib_buf); - if (ret != CMD_STATUS_COMPLETE) - goto exit; + dev_printk(KERN_DEBUG, &udev->dev, + "using firmware %s (version %d.%d.%d-%d)\n", + fwe->fwname, fwh->major, fwh->minor, fwh->patch, fwh->build); - /* second block of settings */ - priv->mib_buf.size = 3; - priv->mib_buf.index = offsetof(struct mib_mac_encryption, - exclude_unencrypted); - priv->mib_buf.data.data[0] = 1; /* exclude_unencrypted */ - priv->mib_buf.data.data[1] = 0; /* wep_encryption_type */ - priv->mib_buf.data.data[2] = 0; /* ckip_key_permutation */ + at76_dbg(DBG_DEVSTART, "board %u, int %d:%d, ext %d:%d", board_type, + le32_to_cpu(fwh->int_fw_offset), le32_to_cpu(fwh->int_fw_len), + le32_to_cpu(fwh->ext_fw_offset), le32_to_cpu(fwh->ext_fw_len)); + at76_dbg(DBG_DEVSTART, "firmware id %s", str); - ret = at76_set_mib(priv, &priv->mib_buf); - if (ret != CMD_STATUS_COMPLETE) - goto exit; - ret = 0; - }; exit: - at76_dump_mib_mac_encryption(priv); - mutex_unlock(&priv->mtx); - return ret; -} - -static int at76_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - const u8 *local_address, const u8 *address, - struct ieee80211_key_conf *key) -{ - struct at76_priv *priv = hw->priv; - - at76_dbg(DBG_MAC80211, "%s(): cmd %d key->alg %d key->keyidx %d " - "key->keylen %d", - __func__, cmd, key->alg, key->keyidx, key->keylen); + mutex_unlock(&fw_mutex); - if (FIRMWARE_IS_WPA(priv->fw_version)) - return at76_set_key_newfw(hw, cmd, local_address, address, key); + if (fwe->loaded) + return fwe; else - return at76_set_key_oldfw(hw, cmd, local_address, address, key); - + return NULL; } -static const struct ieee80211_ops at76_ops = { - .tx = at76_mac80211_tx, - .add_interface = at76_add_interface, - .remove_interface = at76_remove_interface, - .config = at76_config, - .config_interface = at76_config_interface, - .configure_filter = at76_configure_filter, - .start = at76_mac80211_start, - .stop = at76_mac80211_stop, - .hw_scan = at76_hw_scan, - .set_key = at76_set_key, -}; - /* Allocate network device and initialize private data */ static struct at76_priv *at76_alloc_new_device(struct usb_device *udev) { - struct ieee80211_hw *hw; + struct net_device *netdev; struct at76_priv *priv; + int i; - hw = ieee80211_alloc_hw(sizeof(struct at76_priv), &at76_ops); - if (!hw) { - printk(KERN_ERR DRIVER_NAME ": could not register" - " ieee80211_hw\n"); + /* allocate memory for our device state and initialize it */ + netdev = alloc_etherdev(sizeof(struct at76_priv)); + if (!netdev) { + dev_printk(KERN_ERR, &udev->dev, "out of memory\n"); return NULL; } - priv = hw->priv; - priv->hw = hw; + priv = netdev_priv(netdev); priv->udev = udev; + priv->netdev = netdev; mutex_init(&priv->mtx); + INIT_WORK(&priv->work_assoc_done, at76_work_assoc_done); + INIT_WORK(&priv->work_join, at76_work_join); + INIT_WORK(&priv->work_new_bss, at76_work_new_bss); + INIT_WORK(&priv->work_start_scan, at76_work_start_scan); INIT_WORK(&priv->work_set_promisc, at76_work_set_promisc); INIT_WORK(&priv->work_submit_rx, at76_work_submit_rx); - INIT_DELAYED_WORK(&priv->dwork_hw_scan, at76_dwork_hw_scan); + INIT_DELAYED_WORK(&priv->dwork_restart, at76_dwork_restart); + INIT_DELAYED_WORK(&priv->dwork_get_scan, at76_dwork_get_scan); + INIT_DELAYED_WORK(&priv->dwork_beacon, at76_dwork_beacon); + INIT_DELAYED_WORK(&priv->dwork_auth, at76_dwork_auth); + INIT_DELAYED_WORK(&priv->dwork_assoc, at76_dwork_assoc); + + spin_lock_init(&priv->mgmt_spinlock); + priv->next_mgmt_bulk = NULL; + priv->mac_state = MAC_INIT; + + /* initialize empty BSS list */ + priv->curr_bss = NULL; + INIT_LIST_HEAD(&priv->bss_list); + spin_lock_init(&priv->bss_list_spinlock); + + init_timer(&priv->bss_list_timer); + priv->bss_list_timer.data = (unsigned long)priv; + priv->bss_list_timer.function = at76_bss_list_timeout; + + spin_lock_init(&priv->spy_spinlock); + + /* mark all rx data entries as unused */ + for (i = 0; i < NR_RX_DATA_BUF; i++) + priv->rx_data[i].skb = NULL; priv->rx_tasklet.func = at76_rx_tasklet; priv->rx_tasklet.data = 0; @@ -2371,9 +5197,6 @@ static struct at76_priv *at76_alloc_new_device(struct usb_device *udev) priv->pm_mode = AT76_PM_OFF; priv->pm_period = 0; - /* unit us */ - priv->hw->channel_change_time = 100000; - return priv; } @@ -2436,42 +5259,11 @@ static int at76_alloc_urbs(struct at76_priv *priv, return 0; } -static struct ieee80211_rate at76_rates[] = { - { .bitrate = 10, .hw_value = TX_RATE_1MBIT, }, - { .bitrate = 20, .hw_value = TX_RATE_2MBIT, }, - { .bitrate = 55, .hw_value = TX_RATE_5_5MBIT, }, - { .bitrate = 110, .hw_value = TX_RATE_11MBIT, }, -}; - -static struct ieee80211_channel at76_channels[] = { - { .center_freq = 2412, .hw_value = 1 }, - { .center_freq = 2417, .hw_value = 2 }, - { .center_freq = 2422, .hw_value = 3 }, - { .center_freq = 2427, .hw_value = 4 }, - { .center_freq = 2432, .hw_value = 5 }, - { .center_freq = 2437, .hw_value = 6 }, - { .center_freq = 2442, .hw_value = 7 }, - { .center_freq = 2447, .hw_value = 8 }, - { .center_freq = 2452, .hw_value = 9 }, - { .center_freq = 2457, .hw_value = 10 }, - { .center_freq = 2462, .hw_value = 11 }, - { .center_freq = 2467, .hw_value = 12 }, - { .center_freq = 2472, .hw_value = 13 }, - { .center_freq = 2484, .hw_value = 14 } -}; - -static struct ieee80211_supported_band at76_supported_band = { - .channels = at76_channels, - .n_channels = ARRAY_SIZE(at76_channels), - .bitrates = at76_rates, - .n_bitrates = ARRAY_SIZE(at76_rates), -}; - /* Register network device and initialize the hardware */ static int at76_init_new_device(struct at76_priv *priv, struct usb_interface *interface) { - struct device *dev = &interface->dev; + struct net_device *netdev = priv->netdev; int ret; /* set up the endpoint information */ @@ -2487,11 +5279,14 @@ static int at76_init_new_device(struct at76_priv *priv, /* MAC address */ ret = at76_get_hw_config(priv); if (ret < 0) { - dev_err(dev, "cannot get MAC address\n"); + dev_printk(KERN_ERR, &interface->dev, + "cannot get MAC address\n"); goto exit; } priv->domain = at76_get_reg_domain(priv->regulatory_domain); + /* init. netdev->dev_addr */ + memcpy(netdev->dev_addr, priv->mac_addr, ETH_ALEN); priv->channel = DEF_CHANNEL; priv->iw_mode = IW_MODE_INFRA; @@ -2501,54 +5296,47 @@ static int at76_init_new_device(struct at76_priv *priv, priv->txrate = TX_RATE_AUTO; priv->preamble_type = PREAMBLE_TYPE_LONG; priv->beacon_period = 100; + priv->beacons_last_qual = jiffies; priv->auth_mode = WLAN_AUTH_OPEN; priv->scan_min_time = DEF_SCAN_MIN_TIME; priv->scan_max_time = DEF_SCAN_MAX_TIME; priv->scan_mode = SCAN_TYPE_ACTIVE; - priv->default_pairwise_key = 0xff; - priv->default_group_key = 0xff; - - /* mac80211 initialisation */ - priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &at76_supported_band; - if (FIRMWARE_IS_WPA(priv->fw_version) && - (at76_is_503rfmd(priv->board_type) || - at76_is_505(priv->board_type))) - priv->hw->flags = IEEE80211_HW_SIGNAL_UNSPEC; - else - priv->hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SIGNAL_UNSPEC; - - priv->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); - - SET_IEEE80211_DEV(priv->hw, &interface->dev); - SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); - - ret = ieee80211_register_hw(priv->hw); + netdev->flags &= ~IFF_MULTICAST; /* not yet or never */ + netdev->open = at76_open; + netdev->stop = at76_stop; + netdev->get_stats = at76_get_stats; + netdev->ethtool_ops = &at76_ethtool_ops; + + /* Add pointers to enable iwspy support. */ + priv->wireless_data.spy_data = &priv->spy_data; + netdev->wireless_data = &priv->wireless_data; + + netdev->hard_start_xmit = at76_tx; + netdev->tx_timeout = at76_tx_timeout; + netdev->watchdog_timeo = 2 * HZ; + netdev->wireless_handlers = &at76_handler_def; + netdev->set_multicast_list = at76_set_multicast; + netdev->set_mac_address = at76_set_mac_address; + dev_alloc_name(netdev, "wlan%d"); + + ret = register_netdev(priv->netdev); if (ret) { - dev_err(dev, "cannot register mac80211 hw (status %d)!\n", ret); + dev_printk(KERN_ERR, &interface->dev, + "cannot register netdevice (status %d)!\n", ret); goto exit; } + priv->netdev_registered = 1; - priv->mac80211_registered = 1; + printk(KERN_INFO "%s: USB %s, MAC %s, firmware %d.%d.%d-%d\n", + netdev->name, dev_name(&interface->dev), mac2str(priv->mac_addr), + priv->fw_version.major, priv->fw_version.minor, + priv->fw_version.patch, priv->fw_version.build); + printk(KERN_INFO "%s: regulatory domain 0x%02x: %s\n", netdev->name, + priv->regulatory_domain, priv->domain->name); - dev_info(dev, "%s: USB %s, MAC %s, firmware %d.%d.%d-%d\n", - wiphy_name(priv->hw->wiphy), - dev_name(&interface->dev), mac2str(priv->mac_addr), - priv->fw_version.major, priv->fw_version.minor, - priv->fw_version.patch, priv->fw_version.build); - dev_info(dev, "%s: regulatory domain 0x%02x: %s\n", - wiphy_name(priv->hw->wiphy), - priv->regulatory_domain, priv->domain->name); - dev_info(dev, "%s: WPA support: ", wiphy_name(priv->hw->wiphy)); - if (!FIRMWARE_IS_WPA(priv->fw_version)) - printk("none\n"); - else { - if (!at76_is_505a(priv->board_type)) - printk("TKIP\n"); - else - printk("TKIP, AES/CCMP\n"); - }; + /* we let this timer run the whole time this driver instance lives */ + mod_timer(&priv->bss_list_timer, jiffies + BSS_LIST_TIMEOUT); exit: return ret; @@ -2556,13 +5344,15 @@ exit: static void at76_delete_device(struct at76_priv *priv) { + int i; + at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__); /* The device is gone, don't bother turning it off */ priv->device_unplugged = 1; - if (priv->mac80211_registered) - ieee80211_unregister_hw(priv->hw); + if (priv->netdev_registered) + unregister_netdev(priv->netdev); /* assuming we used keventd, it must quiesce too */ flush_scheduled_work(); @@ -2583,11 +5373,25 @@ static void at76_delete_device(struct at76_priv *priv) if (priv->rx_skb) kfree_skb(priv->rx_skb); + at76_free_bss_list(priv); + del_timer_sync(&priv->bss_list_timer); + cancel_delayed_work(&priv->dwork_get_scan); + cancel_delayed_work(&priv->dwork_beacon); + cancel_delayed_work(&priv->dwork_auth); + cancel_delayed_work(&priv->dwork_assoc); + + if (priv->mac_state == MAC_CONNECTED) + at76_iwevent_bss_disconnect(priv->netdev); + + for (i = 0; i < NR_RX_DATA_BUF; i++) + if (priv->rx_data[i].skb) { + dev_kfree_skb(priv->rx_data[i].skb); + priv->rx_data[i].skb = NULL; + } usb_put_dev(priv->udev); - at76_dbg(DBG_PROC_ENTRY, "%s: before freeing priv/ieee80211_hw", - __func__); - ieee80211_free_hw(priv->hw); + at76_dbg(DBG_PROC_ENTRY, "%s: before freeing priv/netdev", __func__); + free_netdev(priv->netdev); /* priv is in netdev */ at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__); } @@ -2621,8 +5425,8 @@ static int at76_probe(struct usb_interface *interface, we get 204 with 2.4.23, Fiberline FL-WL240u (505A+RFMD2958) ??? */ if (op_mode == OPMODE_HW_CONFIG_MODE) { - dev_err(&interface->dev, - "cannot handle a device in HW_CONFIG_MODE\n"); + dev_printk(KERN_ERR, &interface->dev, + "cannot handle a device in HW_CONFIG_MODE\n"); ret = -EBUSY; goto error; } @@ -2630,12 +5434,13 @@ static int at76_probe(struct usb_interface *interface, if (op_mode != OPMODE_NORMAL_NIC_WITH_FLASH && op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) { /* download internal firmware part */ - dev_dbg(&interface->dev, "downloading internal firmware\n"); + dev_printk(KERN_DEBUG, &interface->dev, + "downloading internal firmware\n"); ret = at76_load_internal_fw(udev, fwe); if (ret < 0) { - dev_err(&interface->dev, - "error %d downloading internal firmware\n", - ret); + dev_printk(KERN_ERR, &interface->dev, + "error %d downloading internal firmware\n", + ret); goto error; } usb_put_dev(udev); @@ -2660,7 +5465,8 @@ static int at76_probe(struct usb_interface *interface, need_ext_fw = 1; if (need_ext_fw) { - dev_dbg(&interface->dev, "downloading external firmware\n"); + dev_printk(KERN_DEBUG, &interface->dev, + "downloading external firmware\n"); ret = at76_load_external_fw(udev, fwe); if (ret) @@ -2669,8 +5475,8 @@ static int at76_probe(struct usb_interface *interface, /* Re-check firmware version */ ret = at76_get_mib(udev, MIB_FW_VERSION, &fwv, sizeof(fwv)); if (ret < 0) { - dev_err(&interface->dev, - "error %d getting firmware version\n", ret); + dev_printk(KERN_ERR, &interface->dev, + "error %d getting firmware version\n", ret); goto error; } } @@ -2681,6 +5487,7 @@ static int at76_probe(struct usb_interface *interface, goto error; } + SET_NETDEV_DEV(priv->netdev, &interface->dev); usb_set_intfdata(interface, priv); memcpy(&priv->fw_version, &fwv, sizeof(struct mib_fw_version)); @@ -2708,7 +5515,7 @@ static void at76_disconnect(struct usb_interface *interface) if (!priv) return; - printk(KERN_INFO "%s: disconnecting\n", wiphy_name(priv->hw->wiphy)); + printk(KERN_INFO "%s: disconnecting\n", priv->netdev->name); at76_delete_device(priv); dev_printk(KERN_INFO, &interface->dev, "disconnected\n"); } @@ -2764,8 +5571,5 @@ MODULE_AUTHOR("Alex <alex@foogod.com>"); MODULE_AUTHOR("Nick Jones"); MODULE_AUTHOR("Balint Seeber <n0_5p4m_p13453@hotmail.com>"); MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>"); -MODULE_AUTHOR("Guido Guenther <agx@sigxcpu.org>"); -MODULE_AUTHOR("Kalle Valo <kalle.valo@iki.fi>"); -MODULE_AUTHOR("Milan Plzik <milan.plzik@gmail.com>"); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/at76_usb/at76_usb.h b/drivers/staging/at76_usb/at76_usb.h index 8bb352f16d45..b20be9da1fa1 100644 --- a/drivers/staging/at76_usb/at76_usb.h +++ b/drivers/staging/at76_usb/at76_usb.h @@ -34,6 +34,23 @@ enum board_type { BOARD_505AMX = 8 }; +/* our private ioctl's */ +/* preamble length (0 - long, 1 - short, 2 - auto) */ +#define AT76_SET_SHORT_PREAMBLE (SIOCIWFIRSTPRIV + 0) +#define AT76_GET_SHORT_PREAMBLE (SIOCIWFIRSTPRIV + 1) +/* which debug channels are enabled */ +#define AT76_SET_DEBUG (SIOCIWFIRSTPRIV + 2) +#define AT76_GET_DEBUG (SIOCIWFIRSTPRIV + 3) +/* power save mode (incl. the Atmel proprietary smart save mode) */ +#define AT76_SET_POWERSAVE_MODE (SIOCIWFIRSTPRIV + 4) +#define AT76_GET_POWERSAVE_MODE (SIOCIWFIRSTPRIV + 5) +/* min and max channel times for scan */ +#define AT76_SET_SCAN_TIMES (SIOCIWFIRSTPRIV + 6) +#define AT76_GET_SCAN_TIMES (SIOCIWFIRSTPRIV + 7) +/* scan mode (0 - active, 1 - passive) */ +#define AT76_SET_SCAN_MODE (SIOCIWFIRSTPRIV + 8) +#define AT76_GET_SCAN_MODE (SIOCIWFIRSTPRIV + 9) + #define CMD_STATUS_IDLE 0x00 #define CMD_STATUS_COMPLETE 0x01 #define CMD_STATUS_UNKNOWN 0x02 @@ -65,7 +82,6 @@ enum board_type { #define MIB_MAC 0x03 #define MIB_MAC_MGMT 0x05 #define MIB_MAC_WEP 0x06 -#define MIB_MAC_ENCRYPTION 0x06 #define MIB_PHY 0x07 #define MIB_FW_VERSION 0x08 #define MIB_MDOMAIN 0x09 @@ -90,26 +106,6 @@ enum board_type { #define AT76_PM_ON 2 #define AT76_PM_SMART 3 -/* cipher values for encryption keys */ -#define CIPHER_NONE 0 /* this value is only guessed */ -#define CIPHER_WEP64 1 -#define CIPHER_TKIP 2 -#define CIPHER_CCMP 3 -#define CIPHER_CCX 4 /* for consistency sake only */ -#define CIPHER_WEP128 5 - -/* bit flags key types for encryption keys */ -#define KEY_PAIRWISE 2 -#define KEY_TX 4 - -#define CIPHER_KEYS (4) -#define CIPHER_KEY_LEN (40) - -struct key_config { - u8 cipher; - u8 keylen; -}; - struct hwcfg_r505 { u8 cr39_values[14]; u8 reserved1[14]; @@ -151,9 +147,6 @@ union at76_hwcfg { #define WEP_SMALL_KEY_LEN (40 / 8) #define WEP_LARGE_KEY_LEN (104 / 8) -#define WEP_KEYS (4) - - struct at76_card_config { u8 exclude_unencrypted; @@ -168,7 +161,7 @@ struct at76_card_config { u8 privacy_invoked; u8 wep_default_key_id; /* 0..3 */ u8 current_ssid[32]; - u8 wep_default_key_value[4][WEP_LARGE_KEY_LEN]; + u8 wep_default_key_value[4][WEP_KEY_LEN]; u8 ssid_len; u8 short_preamble; __le16 beacon_period; @@ -193,7 +186,7 @@ struct at76_rx_buffer { u8 link_quality; u8 noise_level; __le32 rx_time; - u8 packet[IEEE80211_MAX_FRAG_THRESHOLD]; + u8 packet[IEEE80211_FRAME_LEN + IEEE80211_FCS_LEN]; } __attribute__((packed)); /* Length of Atmel-specific Tx header before 802.11 frame */ @@ -203,11 +196,8 @@ struct at76_tx_buffer { __le16 wlength; u8 tx_rate; u8 padding; - u8 key_id; - u8 cipher_type; - u8 cipher_length; - u8 reserved; - u8 packet[IEEE80211_MAX_FRAG_THRESHOLD]; + u8 reserved[4]; + u8 packet[IEEE80211_FRAME_LEN + IEEE80211_FCS_LEN]; } __attribute__((packed)); /* defines for scan_type below */ @@ -254,7 +244,6 @@ struct set_mib_buffer { u8 byte; __le16 word; u8 addr[ETH_ALEN]; - u8 data[256]; /* we need more space for mib_mac_encryption */ } data; } __attribute__((packed)); @@ -328,24 +317,10 @@ struct mib_mac_wep { u8 exclude_unencrypted; __le32 wep_icv_error_count; __le32 wep_excluded_count; - u8 wep_default_keyvalue[WEP_KEYS][WEP_LARGE_KEY_LEN]; + u8 wep_default_keyvalue[WEP_KEYS][WEP_KEY_LEN]; u8 encryption_level; /* 1 for 40bit, 2 for 104bit encryption */ } __attribute__((packed)); -struct mib_mac_encryption { - u8 cipher_default_keyvalue[CIPHER_KEYS][CIPHER_KEY_LEN]; - u8 tkip_bssid[6]; - u8 privacy_invoked; - u8 cipher_default_key_id; - u8 cipher_default_group_key_id; - u8 exclude_unencrypted; - u8 wep_encryption_type; - u8 ckip_key_permutation; /* bool */ - __le32 wep_icv_error_count; - __le32 wep_excluded_count; - u8 key_rsc[CIPHER_KEYS][8]; -} __attribute__((packed)); - struct mib_phy { __le32 ed_threshold; @@ -389,6 +364,16 @@ struct at76_fw_header { __le32 ext_fw_len; /* external firmware image length */ } __attribute__((packed)); +enum mac_state { + MAC_INIT, + MAC_SCANNING, + MAC_AUTH, + MAC_ASSOC, + MAC_JOINING, + MAC_CONNECTED, + MAC_OWN_IBSS +}; + /* a description of a regulatory domain and the allowed channels */ struct reg_domain { u16 code; @@ -396,6 +381,47 @@ struct reg_domain { u32 channel_map; /* if bit N is set, channel (N+1) is allowed */ }; +/* how long do we keep a (I)BSS in the bss_list in jiffies + this should be long enough for the user to retrieve the table + (by iwlist ?) after the device started, because all entries from + other channels than the one the device locks on get removed, too */ +#define BSS_LIST_TIMEOUT (120 * HZ) +/* struct to store BSS info found during scan */ +#define BSS_LIST_MAX_RATE_LEN 32 /* 32 rates should be enough ... */ + +struct bss_info { + struct list_head list; + + u8 bssid[ETH_ALEN]; /* bssid */ + u8 ssid[IW_ESSID_MAX_SIZE]; /* essid */ + u8 ssid_len; /* length of ssid above */ + u8 channel; + u16 capa; /* BSS capabilities */ + u16 beacon_interval; /* beacon interval, Kus (1024 microseconds) */ + u8 rates[BSS_LIST_MAX_RATE_LEN]; /* supported rates in units of + 500 kbps, ORed with 0x80 for + basic rates */ + u8 rates_len; + + /* quality of received beacon */ + u8 rssi; + u8 link_qual; + u8 noise_level; + + unsigned long last_rx; /* time (jiffies) of last beacon received */ +}; + +/* a rx data buffer to collect rx fragments */ +struct rx_data_buf { + u8 sender[ETH_ALEN]; /* sender address */ + u16 seqnr; /* sequence number */ + u16 fragnr; /* last fragment received */ + unsigned long last_rx; /* jiffies of last rx */ + struct sk_buff *skb; /* == NULL if entry is free */ +}; + +#define NR_RX_DATA_BUF 8 + /* Data for one loaded firmware file */ struct fwentry { const char *const fwname; @@ -412,9 +438,11 @@ struct fwentry { struct at76_priv { struct usb_device *udev; /* USB device pointer */ + struct net_device *netdev; /* net device pointer */ + struct net_device_stats stats; /* net device stats */ + struct iw_statistics wstats; /* wireless stats */ struct sk_buff *rx_skb; /* skbuff for receiving data */ - struct sk_buff *tx_skb; /* skbuff for transmitting data */ void *bulk_out_buffer; /* buffer for sending data */ struct urb *tx_urb; /* URB for sending data */ @@ -426,17 +454,26 @@ struct at76_priv { struct mutex mtx; /* locks this structure */ /* work queues */ + struct work_struct work_assoc_done; + struct work_struct work_join; + struct work_struct work_new_bss; + struct work_struct work_start_scan; struct work_struct work_set_promisc; struct work_struct work_submit_rx; - struct delayed_work dwork_hw_scan; + struct delayed_work dwork_restart; + struct delayed_work dwork_get_scan; + struct delayed_work dwork_beacon; + struct delayed_work dwork_auth; + struct delayed_work dwork_assoc; struct tasklet_struct rx_tasklet; /* the WEP stuff */ int wep_enabled; /* 1 if WEP is enabled */ int wep_key_id; /* key id to be used */ - u8 wep_keys[WEP_KEYS][WEP_LARGE_KEY_LEN]; /* WEP keys */ - u8 wep_keys_len[WEP_KEYS]; /* length of WEP keys */ + u8 wep_keys[WEP_KEYS][WEP_KEY_LEN]; /* the four WEP keys, + 5 or 13 bytes are used */ + u8 wep_keys_len[WEP_KEYS]; /* the length of the above keys */ int channel; int iw_mode; @@ -458,13 +495,44 @@ struct at76_priv { int scan_mode; /* SCAN_TYPE_ACTIVE, SCAN_TYPE_PASSIVE */ int scan_need_any; /* if set, need to scan for any ESSID */ + /* the list we got from scanning */ + spinlock_t bss_list_spinlock; /* protects bss_list operations */ + struct list_head bss_list; /* list of BSS we got beacons from */ + struct timer_list bss_list_timer; /* timer to purge old entries + from bss_list */ + struct bss_info *curr_bss; /* current BSS */ u16 assoc_id; /* current association ID, if associated */ + u8 wanted_bssid[ETH_ALEN]; + int wanted_bssid_valid; /* != 0 if wanted_bssid is to be used */ + + /* some data for infrastructure mode only */ + spinlock_t mgmt_spinlock; /* this spinlock protects access to + next_mgmt_bulk */ + + struct at76_tx_buffer *next_mgmt_bulk; /* pending management msg to + send via bulk out */ + enum mac_state mac_state; + enum { + SCAN_IDLE, + SCAN_IN_PROGRESS, + SCAN_COMPLETED + } scan_state; + time_t last_scan; + + int retries; /* remaining retries in case of timeout when + * sending AuthReq or AssocReq */ u8 pm_mode; /* power management mode */ u32 pm_period; /* power management period in microseconds */ struct reg_domain const *domain; /* reg domain description */ + /* iwspy support */ + spinlock_t spy_spinlock; + struct iw_spy_data spy_data; + + struct iw_public_data wireless_data; + /* These fields contain HW config provided by the device (not all of * these fields are used by all board types) */ u8 mac_addr[ETH_ALEN]; @@ -472,6 +540,9 @@ struct at76_priv { struct at76_card_config card_config; + /* store rx fragments until complete */ + struct rx_data_buf rx_data[NR_RX_DATA_BUF]; + enum board_type board_type; struct mib_fw_version fw_version; @@ -479,20 +550,58 @@ struct at76_priv { unsigned int netdev_registered:1; struct set_mib_buffer mib_buf; /* global buffer for set_mib calls */ + /* beacon counting */ int beacon_period; /* period of mgmt beacons, Kus */ + int beacons_received; + unsigned long beacons_last_qual; /* time we restarted counting + beacons */ +}; - struct ieee80211_hw *hw; - int mac80211_registered; - - struct key_config keys[4]; /* installed key types */ - u8 default_pairwise_key; - u8 default_group_key; +struct at76_rx_radiotap { + struct ieee80211_radiotap_header rt_hdr; + __le64 rt_tsft; + u8 rt_flags; + u8 rt_rate; + s8 rt_signal; + s8 rt_noise; }; -#define AT76_SUPPORTED_FILTERS FIF_PROMISC_IN_BSS +#define AT76_RX_RADIOTAP_PRESENT \ + ((1 << IEEE80211_RADIOTAP_TSFT) | \ + (1 << IEEE80211_RADIOTAP_FLAGS) | \ + (1 << IEEE80211_RADIOTAP_RATE) | \ + (1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL) | \ + (1 << IEEE80211_RADIOTAP_DB_ANTNOISE)) + +#define BEACON_MAX_DATA_LENGTH 1500 + +/* the maximum size of an AssocReq packet */ +#define ASSOCREQ_MAX_SIZE \ + (AT76_TX_HDRLEN + sizeof(struct ieee80211_assoc_request) + \ + 1 + 1 + IW_ESSID_MAX_SIZE + 1 + 1 + 4) + +/* for shared secret auth, add the challenge text size */ +#define AUTH_FRAME_SIZE (AT76_TX_HDRLEN + sizeof(struct ieee80211_auth)) + +/* Maximal number of AuthReq retries */ +#define AUTH_RETRIES 3 +/* Maximal number of AssocReq retries */ +#define ASSOC_RETRIES 3 + +/* Beacon timeout in managed mode when we are connected */ +#define BEACON_TIMEOUT (10 * HZ) + +/* Timeout for authentication response */ +#define AUTH_TIMEOUT (1 * HZ) + +/* Timeout for association response */ +#define ASSOC_TIMEOUT (1 * HZ) + +/* Polling interval when scan is running */ #define SCAN_POLL_INTERVAL (HZ / 4) +/* Command completion timeout */ #define CMD_COMPLETION_TIMEOUT (5 * HZ) #define DEF_RTS_THRESHOLD 1536 @@ -502,6 +611,8 @@ struct at76_priv { #define DEF_SCAN_MIN_TIME 10 #define DEF_SCAN_MAX_TIME 120 +#define MAX_RTS_THRESHOLD (MAX_FRAG_THRESHOLD + 1) + /* the max padding size for tx in bytes (see calc_padding) */ #define MAX_PADDING_SIZE 53 diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index b501bfb9c754..b47ca1e7e383 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -1,6 +1,7 @@ config COMEDI tristate "Data Acquision support (comedi)" default N + depends on m ---help--- Enable support a wide range of data acquision devices for Linux. diff --git a/drivers/staging/meilhaus/Kconfig b/drivers/staging/meilhaus/Kconfig index 6def83fa2c96..923af22a4686 100644 --- a/drivers/staging/meilhaus/Kconfig +++ b/drivers/staging/meilhaus/Kconfig @@ -4,6 +4,7 @@ menuconfig MEILHAUS tristate "Meilhaus support" + depends on m ---help--- If you have a Meilhaus card, say Y (or M) here. @@ -18,7 +19,7 @@ if MEILHAUS config ME0600 tristate "Meilhaus ME-600 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-600 family of boards that do data collection and multipurpose I/O. @@ -29,7 +30,7 @@ config ME0600 config ME0900 tristate "Meilhaus ME-900 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-900 family of boards that do data collection and multipurpose I/O. @@ -40,7 +41,7 @@ config ME0900 config ME1000 tristate "Meilhaus ME-1000 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-1000 family of boards that do data collection and multipurpose I/O. @@ -51,7 +52,7 @@ config ME1000 config ME1400 tristate "Meilhaus ME-1400 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-1400 family of boards that do data collection and multipurpose I/O. @@ -62,7 +63,7 @@ config ME1400 config ME1600 tristate "Meilhaus ME-1600 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-1600 family of boards that do data collection and multipurpose I/O. @@ -73,7 +74,7 @@ config ME1600 config ME4600 tristate "Meilhaus ME-4600 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-4600 family of boards that do data collection and multipurpose I/O. @@ -84,7 +85,7 @@ config ME4600 config ME6000 tristate "Meilhaus ME-6000 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-6000 family of boards that do data collection and multipurpose I/O. @@ -95,7 +96,7 @@ config ME6000 config ME8100 tristate "Meilhaus ME-8100 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-8100 family of boards that do data collection and multipurpose I/O. @@ -106,7 +107,7 @@ config ME8100 config ME8200 tristate "Meilhaus ME-8200 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-8200 family of boards that do data collection and multipurpose I/O. @@ -117,7 +118,7 @@ config ME8200 config MEDUMMY tristate "Meilhaus dummy driver" default n - depends on PCI + depends on PCI && m help This provides a dummy driver for the Meilhaus driver package diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index 5ffe269c2382..ab69c1bf36a8 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -622,7 +622,7 @@ static int set_ctrl_bits(void) } /* sets ctrl & data port bits according to current signals values */ -static void set_bits(void) +static void panel_set_bits(void) { set_data_bits(); set_ctrl_bits(); @@ -707,12 +707,12 @@ static void lcd_send_serial(int byte) */ for (bit = 0; bit < 8; bit++) { bits.cl = BIT_CLR; /* CLK low */ - set_bits(); + panel_set_bits(); bits.da = byte & 1; - set_bits(); + panel_set_bits(); udelay(2); /* maintain the data during 2 us before CLK up */ bits.cl = BIT_SET; /* CLK high */ - set_bits(); + panel_set_bits(); udelay(1); /* maintain the strobe during 1 us */ byte >>= 1; } @@ -727,7 +727,7 @@ static void lcd_backlight(int on) /* The backlight is activated by seting the AUTOFEED line to +5V */ spin_lock(&pprt_lock); bits.bl = on; - set_bits(); + panel_set_bits(); spin_unlock(&pprt_lock); } diff --git a/drivers/staging/poch/poch.c b/drivers/staging/poch/poch.c index ec343ef53a85..0d111ddfabb2 100644 --- a/drivers/staging/poch/poch.c +++ b/drivers/staging/poch/poch.c @@ -1026,7 +1026,7 @@ static int poch_ioctl(struct inode *inode, struct file *filp, } break; case POCH_IOC_GET_COUNTERS: - if (access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters))) + if (!access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters))) return -EFAULT; spin_lock_irq(&channel->counters_lock); diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c index 72e209276ea7..22f93dd0ba03 100644 --- a/drivers/staging/usbip/usbip_common.c +++ b/drivers/staging/usbip/usbip_common.c @@ -406,8 +406,20 @@ void usbip_start_threads(struct usbip_device *ud) /* * threads are invoked per one device (per one connection). */ - kernel_thread(usbip_thread, (void *)&ud->tcp_rx, 0); - kernel_thread(usbip_thread, (void *)&ud->tcp_tx, 0); + int retval; + + retval = kernel_thread(usbip_thread, (void *)&ud->tcp_rx, 0); + if (retval < 0) { + printk(KERN_ERR "Creating tcp_rx thread for ud %p failed.\n", + ud); + return; + } + retval = kernel_thread(usbip_thread, (void *)&ud->tcp_tx, 0); + if (retval < 0) { + printk(KERN_ERR "Creating tcp_tx thread for ud %p failed.\n", + ud); + return; + } /* confirm threads are starting */ wait_for_completion(&ud->tcp_rx.thread_done); diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 8b7c419b876e..b2ceb4aff233 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -11,8 +11,10 @@ obj-$(CONFIG_USB_MON) += mon/ obj-$(CONFIG_PCI) += host/ obj-$(CONFIG_USB_EHCI_HCD) += host/ obj-$(CONFIG_USB_ISP116X_HCD) += host/ +obj-$(CONFIG_USB_ISP1760_HCD) += host/ obj-$(CONFIG_USB_OHCI_HCD) += host/ obj-$(CONFIG_USB_UHCI_HCD) += host/ +obj-$(CONFIG_USB_FHCI_HCD) += host/ obj-$(CONFIG_USB_SL811_HCD) += host/ obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_USB_R8A66597_HCD) += host/ diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 00b47ea24f86..326dd7f65ee9 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1349,6 +1349,9 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, { USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, @@ -1370,6 +1373,9 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, /* control interfaces with various AT-command sets */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index b5775af3ba26..3f3ee1351930 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -226,6 +226,7 @@ static const struct quirk_printer_struct quirk_printers[] = { { 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */ { 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */ { 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */ + { 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */ { 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */ { 0, 0 } }; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 26fece124e0e..7513bb083c15 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1700,7 +1700,7 @@ const struct file_operations usbdev_file_operations = { .release = usbdev_release, }; -void usb_fs_classdev_common_remove(struct usb_device *udev) +static void usbdev_remove(struct usb_device *udev) { struct dev_state *ps; struct siginfo sinfo; @@ -1742,10 +1742,15 @@ static void usb_classdev_remove(struct usb_device *dev) { if (dev->usb_classdev) device_unregister(dev->usb_classdev); - usb_fs_classdev_common_remove(dev); } -static int usb_classdev_notify(struct notifier_block *self, +#else +#define usb_classdev_add(dev) 0 +#define usb_classdev_remove(dev) do {} while (0) + +#endif + +static int usbdev_notify(struct notifier_block *self, unsigned long action, void *dev) { switch (action) { @@ -1755,15 +1760,15 @@ static int usb_classdev_notify(struct notifier_block *self, break; case USB_DEVICE_REMOVE: usb_classdev_remove(dev); + usbdev_remove(dev); break; } return NOTIFY_OK; } static struct notifier_block usbdev_nb = { - .notifier_call = usb_classdev_notify, + .notifier_call = usbdev_notify, }; -#endif static struct cdev usb_device_cdev; @@ -1798,9 +1803,8 @@ int __init usb_devio_init(void) * to /sys/dev */ usb_classdev_class->dev_kobj = NULL; - - usb_register_notify(&usbdev_nb); #endif + usb_register_notify(&usbdev_nb); out: return retval; @@ -1811,8 +1815,8 @@ error_cdev: void usb_devio_cleanup(void) { -#ifdef CONFIG_USB_DEVICE_CLASS usb_unregister_notify(&usbdev_nb); +#ifdef CONFIG_USB_DEVICE_CLASS class_destroy(usb_classdev_class); #endif cdev_del(&usb_device_cdev); diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 98760553bc95..d0a21a5f8201 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -284,7 +284,7 @@ static int usb_unbind_interface(struct device *dev) * supports "soft" unbinding. */ if (!driver->soft_unbind) - usb_disable_interface(udev, intf); + usb_disable_interface(udev, intf, false); driver->disconnect(intf); usb_cancel_queued_reset(intf); diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 507741ed4482..c54fc40458b1 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -128,7 +128,6 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) } pci_set_master(dev); - device_set_wakeup_enable(&dev->dev, 1); retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); if (retval != 0) @@ -201,6 +200,7 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) struct usb_hcd *hcd = pci_get_drvdata(dev); int retval = 0; int wake, w; + int has_pci_pm; /* Root hub suspend should have stopped all downstream traffic, * and all bus master traffic. And done so for both the interface @@ -230,6 +230,15 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) synchronize_irq(dev->irq); + /* Downstream ports from this root hub should already be quiesced, so + * there will be no DMA activity. Now we can shut down the upstream + * link (except maybe for PME# resume signaling) and enter some PCI + * low power state, if the hardware allows. + */ + pci_disable_device(dev); + + pci_save_state(dev); + /* Don't fail on error to enable wakeup. We rely on pci code * to reject requests the hardware can't implement, rather * than coding the same thing. @@ -241,35 +250,6 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) wake = w; dev_dbg(&dev->dev, "wakeup: %d\n", wake); - /* Downstream ports from this root hub should already be quiesced, so - * there will be no DMA activity. Now we can shut down the upstream - * link (except maybe for PME# resume signaling) and enter some PCI - * low power state, if the hardware allows. - */ - pci_disable_device(dev); - done: - return retval; -} -EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend); - -/** - * usb_hcd_pci_suspend_late - suspend a PCI-based HCD after IRQs are disabled - * @dev: USB Host Controller being suspended - * @message: Power Management message describing this state transition - * - * Store this function in the HCD's struct pci_driver as .suspend_late. - */ -int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message) -{ - int retval = 0; - int has_pci_pm; - - /* We might already be suspended (runtime PM -- not yet written) */ - if (dev->current_state != PCI_D0) - goto done; - - pci_save_state(dev); - /* Don't change state if we don't need to */ if (message.event == PM_EVENT_FREEZE || message.event == PM_EVENT_PRETHAW) { @@ -315,7 +295,7 @@ int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message) done: return retval; } -EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late); +EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend); /** * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled @@ -325,65 +305,8 @@ EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late); */ int usb_hcd_pci_resume_early(struct pci_dev *dev) { - int retval = 0; - pci_power_t state = dev->current_state; - -#ifdef CONFIG_PPC_PMAC - /* Reenable ASIC clocks for USB */ - if (machine_is(powermac)) { - struct device_node *of_node; - - of_node = pci_device_to_OF_node(dev); - if (of_node) - pmac_call_feature(PMAC_FTR_USB_ENABLE, - of_node, 0, 1); - } -#endif - - /* NOTE: chip docs cover clean "real suspend" cases (what Linux - * calls "standby", "suspend to RAM", and so on). There are also - * dirty cases when swsusp fakes a suspend in "shutdown" mode. - */ - if (state != PCI_D0) { -#ifdef DEBUG - int pci_pm; - u16 pmcr; - - pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM); - pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr); - pmcr &= PCI_PM_CTRL_STATE_MASK; - if (pmcr) { - /* Clean case: power to USB and to HC registers was - * maintained; remote wakeup is easy. - */ - dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr); - } else { - /* Clean: HC lost Vcc power, D0 uninitialized - * + Vaux may have preserved port and transceiver - * state ... for remote wakeup from D3cold - * + or not; HCD must reinit + re-enumerate - * - * Dirty: D0 semi-initialized cases with swsusp - * + after BIOS init - * + after Linux init (HCD statically linked) - */ - dev_dbg(&dev->dev, "resume from previous PCI D%d\n", - state); - } -#endif - - retval = pci_set_power_state(dev, PCI_D0); - } else { - /* Same basic cases: clean (powered/not), dirty */ - dev_dbg(&dev->dev, "PCI legacy resume\n"); - } - - if (retval < 0) - dev_err(&dev->dev, "can't resume: %d\n", retval); - else - pci_restore_state(dev); - - return retval; + pci_restore_state(dev); + return 0; } EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early); @@ -398,6 +321,18 @@ int usb_hcd_pci_resume(struct pci_dev *dev) struct usb_hcd *hcd; int retval; +#ifdef CONFIG_PPC_PMAC + /* Reenable ASIC clocks for USB */ + if (machine_is(powermac)) { + struct device_node *of_node; + + of_node = pci_device_to_OF_node(dev); + if (of_node) + pmac_call_feature(PMAC_FTR_USB_ENABLE, + of_node, 0, 1); + } +#endif + hcd = pci_get_drvdata(dev); if (hcd->state != HC_STATE_SUSPENDED) { dev_dbg(hcd->self.controller, @@ -405,6 +340,8 @@ int usb_hcd_pci_resume(struct pci_dev *dev) return 0; } + pci_enable_wake(dev, PCI_D0, false); + retval = pci_enable_device(dev); if (retval < 0) { dev_err(&dev->dev, "can't re-enable after resume, %d!\n", diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 572d2cf46e8d..5b94a56bec23 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pci_dev *dev); #ifdef CONFIG_PM extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg); -extern int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t msg); extern int usb_hcd_pci_resume_early(struct pci_dev *dev); extern int usb_hcd_pci_resume(struct pci_dev *dev); #endif /* CONFIG_PM */ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 94d5ee263c20..cd50d86029e7 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2382,8 +2382,8 @@ static int hub_port_debounce(struct usb_hub *hub, int port1) void usb_ep0_reinit(struct usb_device *udev) { - usb_disable_endpoint(udev, 0 + USB_DIR_IN); - usb_disable_endpoint(udev, 0 + USB_DIR_OUT); + usb_disable_endpoint(udev, 0 + USB_DIR_IN, true); + usb_disable_endpoint(udev, 0 + USB_DIR_OUT, true); usb_enable_endpoint(udev, &udev->ep0, true); } EXPORT_SYMBOL_GPL(usb_ep0_reinit); diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 2a129cb7bb56..dff5760a37f6 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -717,7 +717,6 @@ static void usbfs_remove_device(struct usb_device *dev) fs_remove_file (dev->usbfs_dentry); dev->usbfs_dentry = NULL; } - usb_fs_classdev_common_remove(dev); } static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index de51667dd64d..31fb204f44c6 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1039,14 +1039,15 @@ static void remove_intf_ep_devs(struct usb_interface *intf) * @dev: the device whose endpoint is being disabled * @epaddr: the endpoint's address. Endpoint number for output, * endpoint number + USB_DIR_IN for input + * @reset_hardware: flag to erase any endpoint state stored in the + * controller hardware * - * Deallocates hcd/hardware state for this endpoint ... and nukes all - * pending urbs. - * - * If the HCD hasn't registered a disable() function, this sets the - * endpoint's maxpacket size to 0 to prevent further submissions. + * Disables the endpoint for URB submission and nukes all pending URBs. + * If @reset_hardware is set then also deallocates hcd/hardware state + * for the endpoint. */ -void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr) +void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr, + bool reset_hardware) { unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK; struct usb_host_endpoint *ep; @@ -1056,15 +1057,18 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr) if (usb_endpoint_out(epaddr)) { ep = dev->ep_out[epnum]; - dev->ep_out[epnum] = NULL; + if (reset_hardware) + dev->ep_out[epnum] = NULL; } else { ep = dev->ep_in[epnum]; - dev->ep_in[epnum] = NULL; + if (reset_hardware) + dev->ep_in[epnum] = NULL; } if (ep) { ep->enabled = 0; usb_hcd_flush_endpoint(dev, ep); - usb_hcd_disable_endpoint(dev, ep); + if (reset_hardware) + usb_hcd_disable_endpoint(dev, ep); } } @@ -1072,17 +1076,21 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr) * usb_disable_interface -- Disable all endpoints for an interface * @dev: the device whose interface is being disabled * @intf: pointer to the interface descriptor + * @reset_hardware: flag to erase any endpoint state stored in the + * controller hardware * * Disables all the endpoints for the interface's current altsetting. */ -void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf) +void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf, + bool reset_hardware) { struct usb_host_interface *alt = intf->cur_altsetting; int i; for (i = 0; i < alt->desc.bNumEndpoints; ++i) { usb_disable_endpoint(dev, - alt->endpoint[i].desc.bEndpointAddress); + alt->endpoint[i].desc.bEndpointAddress, + reset_hardware); } } @@ -1103,8 +1111,8 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__, skip_ep0 ? "non-ep0" : "all"); for (i = skip_ep0; i < 16; ++i) { - usb_disable_endpoint(dev, i); - usb_disable_endpoint(dev, i + USB_DIR_IN); + usb_disable_endpoint(dev, i, true); + usb_disable_endpoint(dev, i + USB_DIR_IN, true); } dev->toggle[0] = dev->toggle[1] = 0; @@ -1274,7 +1282,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) remove_intf_ep_devs(iface); usb_remove_sysfs_intf_files(iface); } - usb_disable_interface(dev, iface); + usb_disable_interface(dev, iface, true); iface->cur_altsetting = alt; @@ -1353,8 +1361,8 @@ int usb_reset_configuration(struct usb_device *dev) */ for (i = 1; i < 16; ++i) { - usb_disable_endpoint(dev, i); - usb_disable_endpoint(dev, i + USB_DIR_IN); + usb_disable_endpoint(dev, i, true); + usb_disable_endpoint(dev, i + USB_DIR_IN, true); } config = dev->actconfig; diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 386177867a8a..79d8a9ea559b 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -15,9 +15,10 @@ extern void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep, bool reset_toggle); extern void usb_enable_interface(struct usb_device *dev, struct usb_interface *intf, bool reset_toggles); -extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr); +extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr, + bool reset_hardware); extern void usb_disable_interface(struct usb_device *dev, - struct usb_interface *intf); + struct usb_interface *intf, bool reset_hardware); extern void usb_release_interface_cache(struct kref *ref); extern void usb_disable_device(struct usb_device *dev, int skip_ep0); extern int usb_deauthorize_device(struct usb_device *); @@ -151,7 +152,6 @@ extern struct usb_driver usbfs_driver; extern const struct file_operations usbfs_devices_fops; extern const struct file_operations usbdev_file_operations; extern void usbfs_conn_disc_event(void); -extern void usb_fs_classdev_common_remove(struct usb_device *udev); extern int usb_devio_init(void); extern void usb_devio_cleanup(void); diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index f2da0269e1b1..5d11c291f1ad 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -683,6 +683,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) struct usb_request *req = cdev->req; int value = -EOPNOTSUPP; u16 w_index = le16_to_cpu(ctrl->wIndex); + u8 intf = w_index & 0xFF; u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); struct usb_function *f = NULL; @@ -769,10 +770,10 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) goto unknown; if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES) break; - f = cdev->config->interface[w_index]; + f = cdev->config->interface[intf]; if (!f) break; - if (w_value && !f->get_alt) + if (w_value && !f->set_alt) break; value = f->set_alt(f, w_index, w_value); break; @@ -781,7 +782,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) goto unknown; if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES) break; - f = cdev->config->interface[w_index]; + f = cdev->config->interface[intf]; if (!f) break; /* lots of interfaces only need altsetting zero... */ @@ -808,7 +809,7 @@ unknown: */ if ((ctrl->bRequestType & USB_RECIP_MASK) == USB_RECIP_INTERFACE) { - f = cdev->config->interface[w_index]; + f = cdev->config->interface[intf]; if (f && f->setup) value = f->setup(f, ctrl); else diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index d6c5bcd40064..d701bf4698d2 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -1622,6 +1622,8 @@ static int qe_ep_disable(struct usb_ep *_ep) nuke(ep, -ESHUTDOWN); ep->desc = NULL; ep->stopped = 1; + ep->tx_req = NULL; + qe_ep_reset(udc, ep->epnum); spin_unlock_irqrestore(&udc->lock, flags); cpm_muram_free(cpm_muram_offset(ep->rxbase)); @@ -1681,14 +1683,11 @@ static void qe_free_request(struct usb_ep *_ep, struct usb_request *_req) kfree(req); } -/* queues (submits) an I/O request to an endpoint */ -static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req, - gfp_t gfp_flags) +static int __qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req) { struct qe_ep *ep = container_of(_ep, struct qe_ep, ep); struct qe_req *req = container_of(_req, struct qe_req, req); struct qe_udc *udc; - unsigned long flags; int reval; udc = ep->udc; @@ -1732,7 +1731,7 @@ static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req, list_add_tail(&req->queue, &ep->queue); dev_vdbg(udc->dev, "gadget have request in %s! %d\n", ep->name, req->req.length); - spin_lock_irqsave(&udc->lock, flags); + /* push the request to device */ if (ep_is_in(ep)) reval = ep_req_send(ep, req); @@ -1748,11 +1747,24 @@ static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req, if (ep->dir == USB_DIR_OUT) reval = ep_req_receive(ep, req); - spin_unlock_irqrestore(&udc->lock, flags); - return 0; } +/* queues (submits) an I/O request to an endpoint */ +static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct qe_ep *ep = container_of(_ep, struct qe_ep, ep); + struct qe_udc *udc = ep->udc; + unsigned long flags; + int ret; + + spin_lock_irqsave(&udc->lock, flags); + ret = __qe_ep_queue(_ep, _req); + spin_unlock_irqrestore(&udc->lock, flags); + return ret; +} + /* dequeues (cancels, unlinks) an I/O request from an endpoint */ static int qe_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) { @@ -2008,7 +2020,7 @@ static void ch9getstatus(struct qe_udc *udc, u8 request_type, u16 value, udc->ep0_dir = USB_DIR_IN; /* data phase */ - status = qe_ep_queue(&ep->ep, &req->req, GFP_ATOMIC); + status = __qe_ep_queue(&ep->ep, &req->req); if (status == 0) return; @@ -2151,6 +2163,9 @@ static int reset_irq(struct qe_udc *udc) { unsigned char i; + if (udc->usb_state == USB_STATE_DEFAULT) + return 0; + qe_usb_disable(); out_8(&udc->usb_regs->usb_usadr, 0); @@ -2442,8 +2457,12 @@ static int __devinit qe_udc_reg_init(struct qe_udc *udc) struct usb_ctlr __iomem *qe_usbregs; qe_usbregs = udc->usb_regs; - /* Init the usb register */ + /* Spec says that we must enable the USB controller to change mode. */ out_8(&qe_usbregs->usb_usmod, 0x01); + /* Mode changed, now disable it, since muram isn't initialized yet. */ + out_8(&qe_usbregs->usb_usmod, 0x00); + + /* Initialize the rest. */ out_be16(&qe_usbregs->usb_usbmr, 0); out_8(&qe_usbregs->usb_uscom, 0); out_be16(&qe_usbregs->usb_usber, USBER_ALL_CLEAR); @@ -2604,6 +2623,10 @@ static int __devinit qe_udc_probe(struct of_device *ofdev, (unsigned long)udc_controller); /* request irq and disable DR */ udc_controller->usb_irq = irq_of_parse_and_map(np, 0); + if (!udc_controller->usb_irq) { + ret = -EINVAL; + goto err_noirq; + } ret = request_irq(udc_controller->usb_irq, qe_udc_irq, 0, driver_name, udc_controller); @@ -2625,6 +2648,8 @@ static int __devinit qe_udc_probe(struct of_device *ofdev, err6: free_irq(udc_controller->usb_irq, udc_controller); err5: + irq_dispose_mapping(udc_controller->usb_irq); +err_noirq: if (udc_controller->nullmap) { dma_unmap_single(udc_controller->gadget.dev.parent, udc_controller->nullp, 256, @@ -2648,7 +2673,7 @@ err2: iounmap(udc_controller->usb_regs); err1: kfree(udc_controller); - + udc_controller = NULL; return ret; } @@ -2710,6 +2735,7 @@ static int __devexit qe_udc_remove(struct of_device *ofdev) kfree(ep->txframe); free_irq(udc_controller->usb_irq, udc_controller); + irq_dispose_mapping(udc_controller->usb_irq); tasklet_kill(&udc_controller->rx_tasklet); diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index cde8fdf15d5b..77c5d0a8a06e 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -297,7 +297,7 @@ void imx_ep_stall(struct imx_ep_struct *imx_ep) for (i = 0; i < 100; i ++) { temp = __raw_readl(imx_usb->base + USB_EP_STAT(EP_NO(imx_ep))); - if (!temp & EPSTAT_STALL) + if (!(temp & EPSTAT_STALL)) break; udelay(20); } diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 2b476b6b3d4d..2c63bfb1f8d9 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -140,6 +140,7 @@ config USB_OHCI_HCD tristate "OHCI HCD support" depends on USB && USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 + select USB_OTG_UTILS if ARCH_OMAP ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's @@ -238,6 +239,23 @@ config USB_UHCI_HCD To compile this driver as a module, choose M here: the module will be called uhci-hcd. +config USB_FHCI_HCD + tristate "Freescale QE USB Host Controller support" + depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE + select FSL_GTM + select QE_USB + help + This driver enables support for Freescale QE USB Host Controller + (as found on MPC8360 and MPC8323 processors), the driver supports + Full and Low Speed USB. + +config FHCI_DEBUG + bool "Freescale QE USB Host Controller debug support" + depends on USB_FHCI_HCD && DEBUG_FS + help + Say "y" to see some FHCI debug information and statistics + throught debugfs. + config USB_U132_HCD tristate "Elan U132 Adapter Host Controller" depends on USB && USB_FTDI_ELAN diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index e5f3f20787e4..f163571e33d8 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -7,6 +7,11 @@ ifeq ($(CONFIG_USB_DEBUG),y) endif isp1760-objs := isp1760-hcd.o isp1760-if.o +fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \ + fhci-tds.o fhci-sched.o +ifeq ($(CONFIG_FHCI_DEBUG),y) +fhci-objs += fhci-dbg.o +endif obj-$(CONFIG_USB_WHCI_HCD) += whci/ @@ -17,6 +22,7 @@ obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o +obj-$(CONFIG_USB_FHCI_HCD) += fhci.o obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index bdc6e86e1f8b..bb21fb0a4969 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -230,7 +230,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) pci_read_config_word(pdev, 0x62, &port_wake); if (port_wake & 0x0001) { dev_warn(&pdev->dev, "Enabling legacy PCI PM\n"); - device_init_wakeup(&pdev->dev, 1); + device_set_wakeup_capable(&pdev->dev, 1); } } @@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .suspend_late = usb_hcd_pci_suspend_late, .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c new file mode 100644 index 000000000000..34e14edf390b --- /dev/null +++ b/drivers/usb/host/fhci-dbg.c @@ -0,0 +1,139 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/usb.h> +#include "../core/hcd.h" +#include "fhci.h" + +void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er) +{ + int i; + + if (usb_er == -1) { + fhci->usb_irq_stat[12]++; + return; + } + + for (i = 0; i < 12; ++i) { + if (usb_er & (1 << i)) + fhci->usb_irq_stat[i]++; + } +} + +static int fhci_dfs_regs_show(struct seq_file *s, void *v) +{ + struct fhci_hcd *fhci = s->private; + struct fhci_regs __iomem *regs = fhci->regs; + + seq_printf(s, + "mode: 0x%x\n" "addr: 0x%x\n" + "command: 0x%x\n" "ep0: 0x%x\n" + "event: 0x%x\n" "mask: 0x%x\n" + "status: 0x%x\n" "SOF timer: %d\n" + "frame number: %d\n" + "lines status: 0x%x\n", + in_8(®s->usb_mod), in_8(®s->usb_addr), + in_8(®s->usb_comm), in_be16(®s->usb_ep[0]), + in_be16(®s->usb_event), in_be16(®s->usb_mask), + in_8(®s->usb_status), in_be16(®s->usb_sof_tmr), + in_be16(®s->usb_frame_num), + fhci_ioports_check_bus_state(fhci)); + + return 0; +} + +static int fhci_dfs_irq_stat_show(struct seq_file *s, void *v) +{ + struct fhci_hcd *fhci = s->private; + int *usb_irq_stat = fhci->usb_irq_stat; + + seq_printf(s, + "RXB: %d\n" "TXB: %d\n" "BSY: %d\n" + "SOF: %d\n" "TXE0: %d\n" "TXE1: %d\n" + "TXE2: %d\n" "TXE3: %d\n" "IDLE: %d\n" + "RESET: %d\n" "SFT: %d\n" "MSF: %d\n" + "IDLE_ONLY: %d\n", + usb_irq_stat[0], usb_irq_stat[1], usb_irq_stat[2], + usb_irq_stat[3], usb_irq_stat[4], usb_irq_stat[5], + usb_irq_stat[6], usb_irq_stat[7], usb_irq_stat[8], + usb_irq_stat[9], usb_irq_stat[10], usb_irq_stat[11], + usb_irq_stat[12]); + + return 0; +} + +static int fhci_dfs_regs_open(struct inode *inode, struct file *file) +{ + return single_open(file, fhci_dfs_regs_show, inode->i_private); +} + +static int fhci_dfs_irq_stat_open(struct inode *inode, struct file *file) +{ + return single_open(file, fhci_dfs_irq_stat_show, inode->i_private); +} + +static const struct file_operations fhci_dfs_regs_fops = { + .open = fhci_dfs_regs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations fhci_dfs_irq_stat_fops = { + .open = fhci_dfs_irq_stat_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +void fhci_dfs_create(struct fhci_hcd *fhci) +{ + struct device *dev = fhci_to_hcd(fhci)->self.controller; + + fhci->dfs_root = debugfs_create_dir(dev->bus_id, NULL); + if (!fhci->dfs_root) { + WARN_ON(1); + return; + } + + fhci->dfs_regs = debugfs_create_file("regs", S_IFREG | S_IRUGO, + fhci->dfs_root, fhci, &fhci_dfs_regs_fops); + + fhci->dfs_irq_stat = debugfs_create_file("irq_stat", + S_IFREG | S_IRUGO, fhci->dfs_root, fhci, + &fhci_dfs_irq_stat_fops); + + WARN_ON(!fhci->dfs_regs || !fhci->dfs_irq_stat); +} + +void fhci_dfs_destroy(struct fhci_hcd *fhci) +{ + if (!fhci->dfs_root) + return; + + if (fhci->dfs_irq_stat) + debugfs_remove(fhci->dfs_irq_stat); + + if (fhci->dfs_regs) + debugfs_remove(fhci->dfs_regs); + + debugfs_remove(fhci->dfs_root); +} diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c new file mode 100644 index 000000000000..ba622cc8a9ba --- /dev/null +++ b/drivers/usb/host/fhci-hcd.c @@ -0,0 +1,836 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/usb.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> +#include <asm/qe.h> +#include <asm/fsl_gtm.h> +#include "../core/hcd.h" +#include "fhci.h" + +void fhci_start_sof_timer(struct fhci_hcd *fhci) +{ + fhci_dbg(fhci, "-> %s\n", __func__); + + /* clear frame_n */ + out_be16(&fhci->pram->frame_num, 0); + + out_be16(&fhci->regs->usb_sof_tmr, 0); + setbits8(&fhci->regs->usb_mod, USB_MODE_SFTE); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +void fhci_stop_sof_timer(struct fhci_hcd *fhci) +{ + fhci_dbg(fhci, "-> %s\n", __func__); + + clrbits8(&fhci->regs->usb_mod, USB_MODE_SFTE); + gtm_stop_timer16(fhci->timer); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +u16 fhci_get_sof_timer_count(struct fhci_usb *usb) +{ + return be16_to_cpu(in_be16(&usb->fhci->regs->usb_sof_tmr) / 12); +} + +/* initialize the endpoint zero */ +static u32 endpoint_zero_init(struct fhci_usb *usb, + enum fhci_mem_alloc data_mem, + u32 ring_len) +{ + u32 rc; + + rc = fhci_create_ep(usb, data_mem, ring_len); + if (rc) + return rc; + + /* inilialize endpoint registers */ + fhci_init_ep_registers(usb, usb->ep0, data_mem); + + return 0; +} + +/* enable the USB interrupts */ +void fhci_usb_enable_interrupt(struct fhci_usb *usb) +{ + struct fhci_hcd *fhci = usb->fhci; + + if (usb->intr_nesting_cnt == 1) { + /* initialize the USB interrupt */ + enable_irq(fhci_to_hcd(fhci)->irq); + + /* initialize the event register and mask register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + + /* enable the timer interrupts */ + enable_irq(fhci->timer->irq); + } else if (usb->intr_nesting_cnt > 1) + fhci_info(fhci, "unbalanced USB interrupts nesting\n"); + usb->intr_nesting_cnt--; +} + +/* diable the usb interrupt */ +void fhci_usb_disable_interrupt(struct fhci_usb *usb) +{ + struct fhci_hcd *fhci = usb->fhci; + + if (usb->intr_nesting_cnt == 0) { + /* diable the timer interrupt */ + disable_irq_nosync(fhci->timer->irq); + + /* disable the usb interrupt */ + disable_irq_nosync(fhci_to_hcd(fhci)->irq); + out_be16(&usb->fhci->regs->usb_mask, 0); + } + usb->intr_nesting_cnt++; +} + +/* enable the USB controller */ +static u32 fhci_usb_enable(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + out_be16(&usb->fhci->regs->usb_event, 0xffff); + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + setbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN); + + mdelay(100); + + return 0; +} + +/* disable the USB controller */ +static u32 fhci_usb_disable(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + fhci_usb_disable_interrupt(usb); + fhci_port_disable(fhci); + + /* disable the usb controller */ + if (usb->port_status == FHCI_PORT_FULL || + usb->port_status == FHCI_PORT_LOW) + fhci_device_disconnected_interrupt(fhci); + + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN); + + return 0; +} + +/* check the bus state by polling the QE bit on the IO ports */ +int fhci_ioports_check_bus_state(struct fhci_hcd *fhci) +{ + u8 bits = 0; + + /* check USBOE,if transmitting,exit */ + if (!gpio_get_value(fhci->gpios[GPIO_USBOE])) + return -1; + + /* check USBRP */ + if (gpio_get_value(fhci->gpios[GPIO_USBRP])) + bits |= 0x2; + + /* check USBRN */ + if (gpio_get_value(fhci->gpios[GPIO_USBRN])) + bits |= 0x1; + + return bits; +} + +static void fhci_mem_free(struct fhci_hcd *fhci) +{ + struct ed *ed; + struct ed *next_ed; + struct td *td; + struct td *next_td; + + list_for_each_entry_safe(ed, next_ed, &fhci->empty_eds, node) { + list_del(&ed->node); + kfree(ed); + } + + list_for_each_entry_safe(td, next_td, &fhci->empty_tds, node) { + list_del(&td->node); + kfree(td); + } + + kfree(fhci->vroot_hub); + fhci->vroot_hub = NULL; + + kfree(fhci->hc_list); + fhci->hc_list = NULL; +} + +static int fhci_mem_init(struct fhci_hcd *fhci) +{ + int i; + + fhci->hc_list = kzalloc(sizeof(*fhci->hc_list), GFP_KERNEL); + if (!fhci->hc_list) + goto err; + + INIT_LIST_HEAD(&fhci->hc_list->ctrl_list); + INIT_LIST_HEAD(&fhci->hc_list->bulk_list); + INIT_LIST_HEAD(&fhci->hc_list->iso_list); + INIT_LIST_HEAD(&fhci->hc_list->intr_list); + INIT_LIST_HEAD(&fhci->hc_list->done_list); + + fhci->vroot_hub = kzalloc(sizeof(*fhci->vroot_hub), GFP_KERNEL); + if (!fhci->vroot_hub) + goto err; + + INIT_LIST_HEAD(&fhci->empty_eds); + INIT_LIST_HEAD(&fhci->empty_tds); + + /* initialize work queue to handle done list */ + fhci_tasklet.data = (unsigned long)fhci; + fhci->process_done_task = &fhci_tasklet; + + for (i = 0; i < MAX_TDS; i++) { + struct td *td; + + td = kmalloc(sizeof(*td), GFP_KERNEL); + if (!td) + goto err; + fhci_recycle_empty_td(fhci, td); + } + for (i = 0; i < MAX_EDS; i++) { + struct ed *ed; + + ed = kmalloc(sizeof(*ed), GFP_KERNEL); + if (!ed) + goto err; + fhci_recycle_empty_ed(fhci, ed); + } + + fhci->active_urbs = 0; + return 0; +err: + fhci_mem_free(fhci); + return -ENOMEM; +} + +/* destroy the fhci_usb structure */ +static void fhci_usb_free(void *lld) +{ + struct fhci_usb *usb = lld; + struct fhci_hcd *fhci = usb->fhci; + + if (usb) { + fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); + fhci_ep0_free(usb); + kfree(usb->actual_frame); + kfree(usb); + } +} + +/* initialize the USB */ +static int fhci_usb_init(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + memset_io(usb->fhci->pram, 0, FHCI_PRAM_SIZE); + + usb->port_status = FHCI_PORT_DISABLED; + usb->max_frame_usage = FRAME_TIME_USAGE; + usb->sw_transaction_time = SW_FIX_TIME_BETWEEN_TRANSACTION; + + usb->actual_frame = kzalloc(sizeof(*usb->actual_frame), GFP_KERNEL); + if (!usb->actual_frame) { + fhci_usb_free(usb); + return -ENOMEM; + } + + INIT_LIST_HEAD(&usb->actual_frame->tds_list); + + /* initializing registers on chip, clear frame number */ + out_be16(&fhci->pram->frame_num, 0); + + /* clear rx state */ + out_be32(&fhci->pram->rx_state, 0); + + /* set mask register */ + usb->saved_msk = (USB_E_TXB_MASK | + USB_E_TXE1_MASK | + USB_E_IDLE_MASK | + USB_E_RESET_MASK | USB_E_SFT_MASK | USB_E_MSF_MASK); + + out_8(&usb->fhci->regs->usb_mod, USB_MODE_HOST | USB_MODE_EN); + + /* clearing the mask register */ + out_be16(&usb->fhci->regs->usb_mask, 0); + + /* initialing the event register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + + if (endpoint_zero_init(usb, DEFAULT_DATA_MEM, DEFAULT_RING_LEN) != 0) { + fhci_usb_free(usb); + return -EINVAL; + } + + return 0; +} + +/* initialize the fhci_usb struct and the corresponding data staruct */ +static struct fhci_usb *fhci_create_lld(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb; + + /* allocate memory for SCC data structure */ + usb = kzalloc(sizeof(*usb), GFP_KERNEL); + if (!usb) { + fhci_err(fhci, "no memory for SCC data struct\n"); + return NULL; + } + + usb->fhci = fhci; + usb->hc_list = fhci->hc_list; + usb->vroot_hub = fhci->vroot_hub; + + usb->transfer_confirm = fhci_transfer_confirm_callback; + + return usb; +} + +static int fhci_start(struct usb_hcd *hcd) +{ + int ret; + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + + ret = fhci_mem_init(fhci); + if (ret) { + fhci_err(fhci, "failed to allocate memory\n"); + goto err; + } + + fhci->usb_lld = fhci_create_lld(fhci); + if (!fhci->usb_lld) { + fhci_err(fhci, "low level driver config failed\n"); + ret = -ENOMEM; + goto err; + } + + ret = fhci_usb_init(fhci); + if (ret) { + fhci_err(fhci, "low level driver initialize failed\n"); + goto err; + } + + spin_lock_init(&fhci->lock); + + /* connect the virtual root hub */ + fhci->vroot_hub->dev_num = 1; /* this field may be needed to fix */ + fhci->vroot_hub->hub.wHubStatus = 0; + fhci->vroot_hub->hub.wHubChange = 0; + fhci->vroot_hub->port.wPortStatus = 0; + fhci->vroot_hub->port.wPortChange = 0; + + hcd->state = HC_STATE_RUNNING; + + /* + * From here on, khubd concurrently accesses the root + * hub; drivers will be talking to enumerated devices. + * (On restart paths, khubd already knows about the root + * hub and could find work as soon as we wrote FLAG_CF.) + * + * Before this point the HC was idle/ready. After, khubd + * and device drivers may start it running. + */ + fhci_usb_enable(fhci); + return 0; +err: + fhci_mem_free(fhci); + return ret; +} + +static void fhci_stop(struct usb_hcd *hcd) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + + fhci_usb_disable_interrupt(fhci->usb_lld); + fhci_usb_disable(fhci); + + fhci_usb_free(fhci->usb_lld); + fhci->usb_lld = NULL; + fhci_mem_free(fhci); +} + +static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + u32 pipe = urb->pipe; + int ret; + int i; + int size = 0; + struct urb_priv *urb_priv; + unsigned long flags; + + switch (usb_pipetype(pipe)) { + case PIPE_CONTROL: + /* 1 td fro setup,1 for ack */ + size = 2; + case PIPE_BULK: + /* one td for every 4096 bytes(can be upto 8k) */ + size += urb->transfer_buffer_length / 4096; + /* ...add for any remaining bytes... */ + if ((urb->transfer_buffer_length % 4096) != 0) + size++; + /* ..and maybe a zero length packet to wrap it up */ + if (size == 0) + size++; + else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0 + && (urb->transfer_buffer_length + % usb_maxpacket(urb->dev, pipe, + usb_pipeout(pipe))) != 0) + size++; + break; + case PIPE_ISOCHRONOUS: + size = urb->number_of_packets; + if (size <= 0) + return -EINVAL; + for (i = 0; i < urb->number_of_packets; i++) { + urb->iso_frame_desc[i].actual_length = 0; + urb->iso_frame_desc[i].status = (u32) (-EXDEV); + } + break; + case PIPE_INTERRUPT: + size = 1; + } + + /* allocate the private part of the URB */ + urb_priv = kzalloc(sizeof(*urb_priv), mem_flags); + if (!urb_priv) + return -ENOMEM; + + /* allocate the private part of the URB */ + urb_priv->tds = kzalloc(size * sizeof(struct td), mem_flags); + if (!urb_priv->tds) { + kfree(urb_priv); + return -ENOMEM; + } + + spin_lock_irqsave(&fhci->lock, flags); + + ret = usb_hcd_link_urb_to_ep(hcd, urb); + if (ret) + goto err; + + /* fill the private part of the URB */ + urb_priv->num_of_tds = size; + + urb->status = -EINPROGRESS; + urb->actual_length = 0; + urb->error_count = 0; + urb->hcpriv = urb_priv; + + fhci_queue_urb(fhci, urb); +err: + if (ret) { + kfree(urb_priv->tds); + kfree(urb_priv); + } + spin_unlock_irqrestore(&fhci->lock, flags); + return ret; +} + +/* dequeue FHCI URB */ +static int fhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + struct fhci_usb *usb = fhci->usb_lld; + int ret = -EINVAL; + unsigned long flags; + + if (!urb || !urb->dev || !urb->dev->bus) + goto out; + + spin_lock_irqsave(&fhci->lock, flags); + + ret = usb_hcd_check_unlink_urb(hcd, urb, status); + if (ret) + goto out2; + + if (usb->port_status != FHCI_PORT_DISABLED) { + struct urb_priv *urb_priv; + + /* + * flag the urb's data for deletion in some upcoming + * SF interrupt's delete list processing + */ + urb_priv = urb->hcpriv; + + if (!urb_priv || (urb_priv->state == URB_DEL)) + goto out2; + + urb_priv->state = URB_DEL; + + /* already pending? */ + urb_priv->ed->state = FHCI_ED_URB_DEL; + } else { + fhci_urb_complete_free(fhci, urb); + } + +out2: + spin_unlock_irqrestore(&fhci->lock, flags); +out: + return ret; +} + +static void fhci_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct fhci_hcd *fhci; + struct ed *ed; + unsigned long flags; + + fhci = hcd_to_fhci(hcd); + spin_lock_irqsave(&fhci->lock, flags); + ed = ep->hcpriv; + if (ed) { + while (ed->td_head != NULL) { + struct td *td = fhci_remove_td_from_ed(ed); + fhci_urb_complete_free(fhci, td->urb); + } + fhci_recycle_empty_ed(fhci, ed); + ep->hcpriv = NULL; + } + spin_unlock_irqrestore(&fhci->lock, flags); +} + +static int fhci_get_frame_number(struct usb_hcd *hcd) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + + return get_frame_num(fhci); +} + +static const struct hc_driver fhci_driver = { + .description = "fsl,usb-fhci", + .product_desc = "FHCI HOST Controller", + .hcd_priv_size = sizeof(struct fhci_hcd), + + /* generic hardware linkage */ + .irq = fhci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* basic lifecycle operation */ + .start = fhci_start, + .stop = fhci_stop, + + /* managing i/o requests and associated device resources */ + .urb_enqueue = fhci_urb_enqueue, + .urb_dequeue = fhci_urb_dequeue, + .endpoint_disable = fhci_endpoint_disable, + + /* scheduling support */ + .get_frame_number = fhci_get_frame_number, + + /* root hub support */ + .hub_status_data = fhci_hub_status_data, + .hub_control = fhci_hub_control, +}; + +static int __devinit of_fhci_probe(struct of_device *ofdev, + const struct of_device_id *ofid) +{ + struct device *dev = &ofdev->dev; + struct device_node *node = ofdev->node; + struct usb_hcd *hcd; + struct fhci_hcd *fhci; + struct resource usb_regs; + unsigned long pram_addr; + unsigned int usb_irq; + const char *sprop; + const u32 *iprop; + int size; + int ret; + int i; + int j; + + if (usb_disabled()) + return -ENODEV; + + sprop = of_get_property(node, "mode", NULL); + if (sprop && strcmp(sprop, "host")) + return -ENODEV; + + hcd = usb_create_hcd(&fhci_driver, dev, dev->bus_id); + if (!hcd) { + dev_err(dev, "could not create hcd\n"); + return -ENOMEM; + } + + fhci = hcd_to_fhci(hcd); + hcd->self.controller = dev; + dev_set_drvdata(dev, hcd); + + iprop = of_get_property(node, "hub-power-budget", &size); + if (iprop && size == sizeof(*iprop)) + hcd->power_budget = *iprop; + + /* FHCI registers. */ + ret = of_address_to_resource(node, 0, &usb_regs); + if (ret) { + dev_err(dev, "could not get regs\n"); + goto err_regs; + } + + hcd->regs = ioremap(usb_regs.start, usb_regs.end - usb_regs.start + 1); + if (!hcd->regs) { + dev_err(dev, "could not ioremap regs\n"); + ret = -ENOMEM; + goto err_regs; + } + fhci->regs = hcd->regs; + + /* Parameter RAM. */ + iprop = of_get_property(node, "reg", &size); + if (!iprop || size < sizeof(*iprop) * 4) { + dev_err(dev, "can't get pram offset\n"); + ret = -EINVAL; + goto err_pram; + } + + pram_addr = cpm_muram_alloc_fixed(iprop[2], FHCI_PRAM_SIZE); + if (IS_ERR_VALUE(pram_addr)) { + dev_err(dev, "failed to allocate usb pram\n"); + ret = -ENOMEM; + goto err_pram; + } + fhci->pram = cpm_muram_addr(pram_addr); + + /* GPIOs and pins */ + for (i = 0; i < NUM_GPIOS; i++) { + int gpio; + enum of_gpio_flags flags; + + gpio = of_get_gpio_flags(node, i, &flags); + fhci->gpios[i] = gpio; + fhci->alow_gpios[i] = flags & OF_GPIO_ACTIVE_LOW; + + if (!gpio_is_valid(gpio)) { + if (i < GPIO_SPEED) { + dev_err(dev, "incorrect GPIO%d: %d\n", + i, gpio); + goto err_gpios; + } else { + dev_info(dev, "assuming board doesn't have " + "%s gpio\n", i == GPIO_SPEED ? + "speed" : "power"); + continue; + } + } + + ret = gpio_request(gpio, dev->bus_id); + if (ret) { + dev_err(dev, "failed to request gpio %d", i); + goto err_gpios; + } + + if (i >= GPIO_SPEED) { + ret = gpio_direction_output(gpio, 0); + if (ret) { + dev_err(dev, "failed to set gpio %d as " + "an output\n", i); + i++; + goto err_gpios; + } + } + } + + for (j = 0; j < NUM_PINS; j++) { + fhci->pins[j] = qe_pin_request(ofdev->node, j); + if (IS_ERR(fhci->pins[j])) { + ret = PTR_ERR(fhci->pins[j]); + dev_err(dev, "can't get pin %d: %d\n", j, ret); + goto err_pins; + } + } + + /* Frame limit timer and its interrupt. */ + fhci->timer = gtm_get_timer16(); + if (IS_ERR(fhci->timer)) { + ret = PTR_ERR(fhci->timer); + dev_err(dev, "failed to request qe timer: %i", ret); + goto err_get_timer; + } + + ret = request_irq(fhci->timer->irq, fhci_frame_limit_timer_irq, + IRQF_DISABLED, "qe timer (usb)", hcd); + if (ret) { + dev_err(dev, "failed to request timer irq"); + goto err_timer_irq; + } + + /* USB Host interrupt. */ + usb_irq = irq_of_parse_and_map(node, 0); + if (usb_irq == NO_IRQ) { + dev_err(dev, "could not get usb irq\n"); + ret = -EINVAL; + goto err_usb_irq; + } + + /* Clocks. */ + sprop = of_get_property(node, "fsl,fullspeed-clock", NULL); + if (sprop) { + fhci->fullspeed_clk = qe_clock_source(sprop); + if (fhci->fullspeed_clk == QE_CLK_DUMMY) { + dev_err(dev, "wrong fullspeed-clock\n"); + ret = -EINVAL; + goto err_clocks; + } + } + + sprop = of_get_property(node, "fsl,lowspeed-clock", NULL); + if (sprop) { + fhci->lowspeed_clk = qe_clock_source(sprop); + if (fhci->lowspeed_clk == QE_CLK_DUMMY) { + dev_err(dev, "wrong lowspeed-clock\n"); + ret = -EINVAL; + goto err_clocks; + } + } + + if (fhci->fullspeed_clk == QE_CLK_NONE && + fhci->lowspeed_clk == QE_CLK_NONE) { + dev_err(dev, "no clocks specified\n"); + ret = -EINVAL; + goto err_clocks; + } + + dev_info(dev, "at 0x%p, irq %d\n", hcd->regs, usb_irq); + + fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); + + /* Start with full-speed, if possible. */ + if (fhci->fullspeed_clk != QE_CLK_NONE) { + fhci_config_transceiver(fhci, FHCI_PORT_FULL); + qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK); + } else { + fhci_config_transceiver(fhci, FHCI_PORT_LOW); + qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3); + } + + /* Clear and disable any pending interrupts. */ + out_be16(&fhci->regs->usb_event, 0xffff); + out_be16(&fhci->regs->usb_mask, 0); + + ret = usb_add_hcd(hcd, usb_irq, IRQF_DISABLED); + if (ret < 0) + goto err_add_hcd; + + fhci_dfs_create(fhci); + + return 0; + +err_add_hcd: +err_clocks: + irq_dispose_mapping(usb_irq); +err_usb_irq: + free_irq(fhci->timer->irq, hcd); +err_timer_irq: + gtm_put_timer16(fhci->timer); +err_get_timer: +err_pins: + while (--j >= 0) + qe_pin_free(fhci->pins[j]); +err_gpios: + while (--i >= 0) { + if (gpio_is_valid(fhci->gpios[i])) + gpio_free(fhci->gpios[i]); + } + cpm_muram_free(pram_addr); +err_pram: + iounmap(hcd->regs); +err_regs: + usb_put_hcd(hcd); + return ret; +} + +static int __devexit fhci_remove(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + int i; + int j; + + usb_remove_hcd(hcd); + free_irq(fhci->timer->irq, hcd); + gtm_put_timer16(fhci->timer); + cpm_muram_free(cpm_muram_offset(fhci->pram)); + for (i = 0; i < NUM_GPIOS; i++) { + if (!gpio_is_valid(fhci->gpios[i])) + continue; + gpio_free(fhci->gpios[i]); + } + for (j = 0; j < NUM_PINS; j++) + qe_pin_free(fhci->pins[j]); + fhci_dfs_destroy(fhci); + usb_put_hcd(hcd); + return 0; +} + +static int __devexit of_fhci_remove(struct of_device *ofdev) +{ + return fhci_remove(&ofdev->dev); +} + +static struct of_device_id of_fhci_match[] = { + { .compatible = "fsl,mpc8323-qe-usb", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_fhci_match); + +static struct of_platform_driver of_fhci_driver = { + .name = "fsl,usb-fhci", + .match_table = of_fhci_match, + .probe = of_fhci_probe, + .remove = __devexit_p(of_fhci_remove), +}; + +static int __init fhci_module_init(void) +{ + return of_register_platform_driver(&of_fhci_driver); +} +module_init(fhci_module_init); + +static void __exit fhci_module_exit(void) +{ + of_unregister_platform_driver(&of_fhci_driver); +} +module_exit(fhci_module_exit); + +MODULE_DESCRIPTION("USB Freescale Host Controller Interface Driver"); +MODULE_AUTHOR("Shlomi Gridish <gridish@freescale.com>, " + "Jerry Huang <Chang-Ming.Huang@freescale.com>, " + "Anton Vorontsov <avorontsov@ru.mvista.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c new file mode 100644 index 000000000000..0cfaedc3e124 --- /dev/null +++ b/drivers/usb/host/fhci-hub.c @@ -0,0 +1,345 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/usb.h> +#include <linux/gpio.h> +#include <asm/qe.h> +#include "../core/hcd.h" +#include "fhci.h" + +/* virtual root hub specific descriptor */ +static u8 root_hub_des[] = { + 0x09, /* blength */ + 0x29, /* bDescriptorType;hub-descriptor */ + 0x01, /* bNbrPorts */ + 0x00, /* wHubCharacteristics */ + 0x00, + 0x01, /* bPwrOn2pwrGood;2ms */ + 0x00, /* bHubContrCurrent;0mA */ + 0x00, /* DeviceRemoveable */ + 0xff, /* PortPwrCtrlMask */ +}; + +static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on) +{ + int gpio = fhci->gpios[gpio_nr]; + bool alow = fhci->alow_gpios[gpio_nr]; + + if (!gpio_is_valid(gpio)) + return; + + gpio_set_value(gpio, on ^ alow); + mdelay(5); +} + +void fhci_config_transceiver(struct fhci_hcd *fhci, + enum fhci_port_status status) +{ + fhci_dbg(fhci, "-> %s: %d\n", __func__, status); + + switch (status) { + case FHCI_PORT_POWER_OFF: + fhci_gpio_set_value(fhci, GPIO_POWER, false); + break; + case FHCI_PORT_DISABLED: + case FHCI_PORT_WAITING: + fhci_gpio_set_value(fhci, GPIO_POWER, true); + break; + case FHCI_PORT_LOW: + fhci_gpio_set_value(fhci, GPIO_SPEED, false); + break; + case FHCI_PORT_FULL: + fhci_gpio_set_value(fhci, GPIO_SPEED, true); + break; + default: + WARN_ON(1); + break; + } + + fhci_dbg(fhci, "<- %s: %d\n", __func__, status); +} + +/* disable the USB port by clearing the EN bit in the USBMOD register */ +void fhci_port_disable(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = (struct fhci_usb *)fhci->usb_lld; + enum fhci_port_status port_status; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_stop_sof_timer(fhci); + + fhci_flush_all_transmissions(usb); + + fhci_usb_disable_interrupt((struct fhci_usb *)fhci->usb_lld); + port_status = usb->port_status; + usb->port_status = FHCI_PORT_DISABLED; + + /* Enable IDLE since we want to know if something comes along */ + usb->saved_msk |= USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + + /* check if during the disconnection process attached new device */ + if (port_status == FHCI_PORT_WAITING) + fhci_device_connected_interrupt(fhci); + usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE; + usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; + fhci_usb_enable_interrupt((struct fhci_usb *)fhci->usb_lld); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +/* enable the USB port by setting the EN bit in the USBMOD register */ +void fhci_port_enable(void *lld) +{ + struct fhci_usb *usb = (struct fhci_usb *)lld; + struct fhci_hcd *fhci = usb->fhci; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_config_transceiver(fhci, usb->port_status); + + if ((usb->port_status != FHCI_PORT_FULL) && + (usb->port_status != FHCI_PORT_LOW)) + fhci_start_sof_timer(fhci); + + usb->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE; + usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +void fhci_io_port_generate_reset(struct fhci_hcd *fhci) +{ + fhci_dbg(fhci, "-> %s\n", __func__); + + gpio_direction_output(fhci->gpios[GPIO_USBOE], 0); + gpio_direction_output(fhci->gpios[GPIO_USBTP], 0); + gpio_direction_output(fhci->gpios[GPIO_USBTN], 0); + + mdelay(5); + + qe_pin_set_dedicated(fhci->pins[PIN_USBOE]); + qe_pin_set_dedicated(fhci->pins[PIN_USBTP]); + qe_pin_set_dedicated(fhci->pins[PIN_USBTN]); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +/* generate the RESET condition on the bus */ +void fhci_port_reset(void *lld) +{ + struct fhci_usb *usb = (struct fhci_usb *)lld; + struct fhci_hcd *fhci = usb->fhci; + u8 mode; + u16 mask; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_stop_sof_timer(fhci); + /* disable the USB controller */ + mode = in_8(&fhci->regs->usb_mod); + out_8(&fhci->regs->usb_mod, mode & (~USB_MODE_EN)); + + /* disable idle interrupts */ + mask = in_be16(&fhci->regs->usb_mask); + out_be16(&fhci->regs->usb_mask, mask & (~USB_E_IDLE_MASK)); + + fhci_io_port_generate_reset(fhci); + + /* enable interrupt on this endpoint */ + out_be16(&fhci->regs->usb_mask, mask); + + /* enable the USB controller */ + mode = in_8(&fhci->regs->usb_mod); + out_8(&fhci->regs->usb_mod, mode | USB_MODE_EN); + fhci_start_sof_timer(fhci); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +int fhci_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + int ret = 0; + unsigned long flags; + + fhci_dbg(fhci, "-> %s\n", __func__); + + spin_lock_irqsave(&fhci->lock, flags); + + if (fhci->vroot_hub->port.wPortChange & (USB_PORT_STAT_C_CONNECTION | + USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND | + USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_OVERCURRENT)) { + *buf = 1 << 1; + ret = 1; + fhci_dbg(fhci, "-- %s\n", __func__); + } + + spin_unlock_irqrestore(&fhci->lock, flags); + + fhci_dbg(fhci, "<- %s\n", __func__); + + return ret; +} + +int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + int retval = 0; + int len = 0; + struct usb_hub_status *hub_status; + struct usb_port_status *port_status; + unsigned long flags; + + spin_lock_irqsave(&fhci->lock, flags); + + fhci_dbg(fhci, "-> %s\n", __func__); + + switch (typeReq) { + case ClearHubFeature: + switch (wValue) { + case C_HUB_LOCAL_POWER: + case C_HUB_OVER_CURRENT: + break; + default: + goto error; + } + break; + case ClearPortFeature: + fhci->vroot_hub->feature &= (1 << wValue); + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_ENABLE; + fhci_port_disable(fhci); + break; + case USB_PORT_FEAT_C_ENABLE: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_ENABLE; + break; + case USB_PORT_FEAT_SUSPEND: + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_SUSPEND; + fhci_stop_sof_timer(fhci); + break; + case USB_PORT_FEAT_C_SUSPEND: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_SUSPEND; + break; + case USB_PORT_FEAT_POWER: + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_POWER; + fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); + break; + case USB_PORT_FEAT_C_CONNECTION: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_CONNECTION; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_OVERCURRENT; + break; + case USB_PORT_FEAT_C_RESET: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_RESET; + break; + default: + goto error; + } + break; + case GetHubDescriptor: + memcpy(buf, root_hub_des, sizeof(root_hub_des)); + buf[3] = 0x11; /* per-port power, no ovrcrnt */ + len = (buf[0] < wLength) ? buf[0] : wLength; + break; + case GetHubStatus: + hub_status = (struct usb_hub_status *)buf; + hub_status->wHubStatus = + cpu_to_le16(fhci->vroot_hub->hub.wHubStatus); + hub_status->wHubChange = + cpu_to_le16(fhci->vroot_hub->hub.wHubChange); + len = 4; + break; + case GetPortStatus: + port_status = (struct usb_port_status *)buf; + port_status->wPortStatus = + cpu_to_le16(fhci->vroot_hub->port.wPortStatus); + port_status->wPortChange = + cpu_to_le16(fhci->vroot_hub->port.wPortChange); + len = 4; + break; + case SetHubFeature: + switch (wValue) { + case C_HUB_OVER_CURRENT: + case C_HUB_LOCAL_POWER: + break; + default: + goto error; + } + break; + case SetPortFeature: + fhci->vroot_hub->feature |= (1 << wValue); + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_ENABLE; + fhci_port_enable(fhci->usb_lld); + break; + case USB_PORT_FEAT_SUSPEND: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_SUSPEND; + fhci_stop_sof_timer(fhci); + break; + case USB_PORT_FEAT_RESET: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_RESET; + fhci_port_reset(fhci->usb_lld); + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_ENABLE; + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_RESET; + break; + case USB_PORT_FEAT_POWER: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_POWER; + fhci_config_transceiver(fhci, FHCI_PORT_WAITING); + break; + default: + goto error; + } + break; + default: +error: + retval = -EPIPE; + } + + fhci_dbg(fhci, "<- %s\n", __func__); + + spin_unlock_irqrestore(&fhci->lock, flags); + + return retval; +} diff --git a/drivers/usb/host/fhci-mem.c b/drivers/usb/host/fhci-mem.c new file mode 100644 index 000000000000..2c0736c99712 --- /dev/null +++ b/drivers/usb/host/fhci-mem.c @@ -0,0 +1,113 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/list.h> +#include <linux/usb.h> +#include "../core/hcd.h" +#include "fhci.h" + +static void init_td(struct td *td) +{ + memset(td, 0, sizeof(*td)); + INIT_LIST_HEAD(&td->node); + INIT_LIST_HEAD(&td->frame_lh); +} + +static void init_ed(struct ed *ed) +{ + memset(ed, 0, sizeof(*ed)); + INIT_LIST_HEAD(&ed->td_list); + INIT_LIST_HEAD(&ed->node); +} + +static struct td *get_empty_td(struct fhci_hcd *fhci) +{ + struct td *td; + + if (!list_empty(&fhci->empty_tds)) { + td = list_entry(fhci->empty_tds.next, struct td, node); + list_del(fhci->empty_tds.next); + } else { + td = kmalloc(sizeof(*td), GFP_ATOMIC); + if (!td) + fhci_err(fhci, "No memory to allocate to TD\n"); + else + init_td(td); + } + + return td; +} + +void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td) +{ + init_td(td); + list_add(&td->node, &fhci->empty_tds); +} + +struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci) +{ + struct ed *ed; + + if (!list_empty(&fhci->empty_eds)) { + ed = list_entry(fhci->empty_eds.next, struct ed, node); + list_del(fhci->empty_eds.next); + } else { + ed = kmalloc(sizeof(*ed), GFP_ATOMIC); + if (!ed) + fhci_err(fhci, "No memory to allocate to ED\n"); + else + init_ed(ed); + } + + return ed; +} + +void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed) +{ + init_ed(ed); + list_add(&ed->node, &fhci->empty_eds); +} + +struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb, + struct urb_priv *urb_priv, struct ed *ed, u16 index, + enum fhci_ta_type type, int toggle, u8 *data, u32 len, + u16 interval, u16 start_frame, bool ioc) +{ + struct td *td = get_empty_td(fhci); + + if (!td) + return NULL; + + td->urb = urb; + td->ed = ed; + td->type = type; + td->toggle = toggle; + td->data = data; + td->len = len; + td->iso_index = index; + td->interval = interval; + td->start_frame = start_frame; + td->ioc = ioc; + td->status = USB_TD_OK; + + urb_priv->tds[index] = td; + + return td; +} diff --git a/drivers/usb/host/fhci-q.c b/drivers/usb/host/fhci-q.c new file mode 100644 index 000000000000..b0a1446ba292 --- /dev/null +++ b/drivers/usb/host/fhci-q.c @@ -0,0 +1,284 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/usb.h> +#include "../core/hcd.h" +#include "fhci.h" + +/* maps the hardware error code to the USB error code */ +static int status_to_error(u32 status) +{ + if (status == USB_TD_OK) + return 0; + else if (status & USB_TD_RX_ER_CRC) + return -EILSEQ; + else if (status & USB_TD_RX_ER_NONOCT) + return -EPROTO; + else if (status & USB_TD_RX_ER_OVERUN) + return -ECOMM; + else if (status & USB_TD_RX_ER_BITSTUFF) + return -EPROTO; + else if (status & USB_TD_RX_ER_PID) + return -EILSEQ; + else if (status & (USB_TD_TX_ER_NAK | USB_TD_TX_ER_TIMEOUT)) + return -ETIMEDOUT; + else if (status & USB_TD_TX_ER_STALL) + return -EPIPE; + else if (status & USB_TD_TX_ER_UNDERUN) + return -ENOSR; + else if (status & USB_TD_RX_DATA_UNDERUN) + return -EREMOTEIO; + else if (status & USB_TD_RX_DATA_OVERUN) + return -EOVERFLOW; + else + return -EINVAL; +} + +void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td) +{ + list_add_tail(&td->frame_lh, &frame->tds_list); +} + +void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number) +{ + int i; + + for (i = 0; i < number; i++) { + struct td *td = td_list[i]; + list_add_tail(&td->node, &ed->td_list); + } + if (ed->td_head == NULL) + ed->td_head = td_list[0]; +} + +static struct td *peek_td_from_ed(struct ed *ed) +{ + struct td *td; + + if (!list_empty(&ed->td_list)) + td = list_entry(ed->td_list.next, struct td, node); + else + td = NULL; + + return td; +} + +struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame) +{ + struct td *td; + + if (!list_empty(&frame->tds_list)) { + td = list_entry(frame->tds_list.next, struct td, frame_lh); + list_del_init(frame->tds_list.next); + } else + td = NULL; + + return td; +} + +struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame) +{ + struct td *td; + + if (!list_empty(&frame->tds_list)) + td = list_entry(frame->tds_list.next, struct td, frame_lh); + else + td = NULL; + + return td; +} + +struct td *fhci_remove_td_from_ed(struct ed *ed) +{ + struct td *td; + + if (!list_empty(&ed->td_list)) { + td = list_entry(ed->td_list.next, struct td, node); + list_del_init(ed->td_list.next); + + /* if this TD was the ED's head, find next TD */ + if (!list_empty(&ed->td_list)) + ed->td_head = list_entry(ed->td_list.next, struct td, + node); + else + ed->td_head = NULL; + } else + td = NULL; + + return td; +} + +struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list) +{ + struct td *td; + + if (!list_empty(&p_list->done_list)) { + td = list_entry(p_list->done_list.next, struct td, node); + list_del_init(p_list->done_list.next); + } else + td = NULL; + + return td; +} + +void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed) +{ + struct td *td; + + td = ed->td_head; + list_del_init(&td->node); + + /* If this TD was the ED's head,find next TD */ + if (!list_empty(&ed->td_list)) + ed->td_head = list_entry(ed->td_list.next, struct td, node); + else { + ed->td_head = NULL; + ed->state = FHCI_ED_SKIP; + } + ed->toggle_carry = td->toggle; + list_add_tail(&td->node, &usb->hc_list->done_list); + if (td->ioc) + usb->transfer_confirm(usb->fhci); +} + +/* free done FHCI URB resource such as ED and TD */ +static void free_urb_priv(struct fhci_hcd *fhci, struct urb *urb) +{ + int i; + struct urb_priv *urb_priv = urb->hcpriv; + struct ed *ed = urb_priv->ed; + + for (i = 0; i < urb_priv->num_of_tds; i++) { + list_del_init(&urb_priv->tds[i]->node); + fhci_recycle_empty_td(fhci, urb_priv->tds[i]); + } + + /* if this TD was the ED's head,find the next TD */ + if (!list_empty(&ed->td_list)) + ed->td_head = list_entry(ed->td_list.next, struct td, node); + else + ed->td_head = NULL; + + kfree(urb_priv->tds); + kfree(urb_priv); + urb->hcpriv = NULL; + + /* if this TD was the ED's head,find next TD */ + if (ed->td_head == NULL) + list_del_init(&ed->node); + fhci->active_urbs--; +} + +/* this routine called to complete and free done URB */ +void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb) +{ + free_urb_priv(fhci, urb); + + if (urb->status == -EINPROGRESS) { + if (urb->actual_length != urb->transfer_buffer_length && + urb->transfer_flags & URB_SHORT_NOT_OK) + urb->status = -EREMOTEIO; + else + urb->status = 0; + } + + usb_hcd_unlink_urb_from_ep(fhci_to_hcd(fhci), urb); + + spin_unlock(&fhci->lock); + + usb_hcd_giveback_urb(fhci_to_hcd(fhci), urb, urb->status); + + spin_lock(&fhci->lock); +} + +/* + * caculate transfer length/stats and update the urb + * Precondition: irqsafe(only for urb-?status locking) + */ +void fhci_done_td(struct urb *urb, struct td *td) +{ + struct ed *ed = td->ed; + u32 cc = td->status; + + /* ISO...drivers see per-TD length/status */ + if (ed->mode == FHCI_TF_ISO) { + u32 len; + if (!(urb->transfer_flags & URB_SHORT_NOT_OK && + cc == USB_TD_RX_DATA_UNDERUN)) + cc = USB_TD_OK; + + if (usb_pipeout(urb->pipe)) + len = urb->iso_frame_desc[td->iso_index].length; + else + len = td->actual_len; + + urb->actual_length += len; + urb->iso_frame_desc[td->iso_index].actual_length = len; + urb->iso_frame_desc[td->iso_index].status = + status_to_error(cc); + } + + /* BULK,INT,CONTROL... drivers see aggregate length/status, + * except that "setup" bytes aren't counted and "short" transfers + * might not be reported as errors. + */ + else { + if (td->error_cnt >= 3) + urb->error_count = 3; + + /* control endpoint only have soft stalls */ + + /* update packet status if needed(short may be ok) */ + if (!(urb->transfer_flags & URB_SHORT_NOT_OK) && + cc == USB_TD_RX_DATA_UNDERUN) { + ed->state = FHCI_ED_OPER; + cc = USB_TD_OK; + } + if (cc != USB_TD_OK) { + if (urb->status == -EINPROGRESS) + urb->status = status_to_error(cc); + } + + /* count all non-empty packets except control SETUP packet */ + if (td->type != FHCI_TA_SETUP || td->iso_index != 0) + urb->actual_length += td->actual_len; + } +} + +/* there are some pedning request to unlink */ +void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed) +{ + struct td *td = peek_td_from_ed(ed); + struct urb *urb = td->urb; + struct urb_priv *urb_priv = urb->hcpriv; + + if (urb_priv->state == URB_DEL) { + td = fhci_remove_td_from_ed(ed); + /* HC may have partly processed this TD */ + if (td->status != USB_TD_INPROGRESS) + fhci_done_td(urb, td); + + /* URB is done;clean up */ + if (++(urb_priv->tds_cnt) == urb_priv->num_of_tds) + fhci_urb_complete_free(fhci, urb); + } +} diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c new file mode 100644 index 000000000000..bb63b68ddb77 --- /dev/null +++ b/drivers/usb/host/fhci-sched.c @@ -0,0 +1,888 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/usb.h> +#include <asm/qe.h> +#include <asm/fsl_gtm.h> +#include "../core/hcd.h" +#include "fhci.h" + +static void recycle_frame(struct fhci_usb *usb, struct packet *pkt) +{ + pkt->data = NULL; + pkt->len = 0; + pkt->status = USB_TD_OK; + pkt->info = 0; + pkt->priv_data = NULL; + + cq_put(usb->ep0->empty_frame_Q, pkt); +} + +/* confirm submitted packet */ +void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt) +{ + struct td *td; + struct packet *td_pkt; + struct ed *ed; + u32 trans_len; + bool td_done = false; + + td = fhci_remove_td_from_frame(usb->actual_frame); + td_pkt = td->pkt; + trans_len = pkt->len; + td->status = pkt->status; + if (td->type == FHCI_TA_IN && td_pkt->info & PKT_DUMMY_PACKET) { + if ((td->data + td->actual_len) && trans_len) + memcpy(td->data + td->actual_len, pkt->data, + trans_len); + cq_put(usb->ep0->dummy_packets_Q, pkt->data); + } + + recycle_frame(usb, pkt); + + ed = td->ed; + if (ed->mode == FHCI_TF_ISO) { + if (ed->td_list.next->next != &ed->td_list) { + struct td *td_next = + list_entry(ed->td_list.next->next, struct td, + node); + + td_next->start_frame = usb->actual_frame->frame_num; + } + td->actual_len = trans_len; + td_done = true; + } else if ((td->status & USB_TD_ERROR) && + !(td->status & USB_TD_TX_ER_NAK)) { + /* + * There was an error on the transaction (but not NAK). + * If it is fatal error (data underrun, stall, bad pid or 3 + * errors exceeded), mark this TD as done. + */ + if ((td->status & USB_TD_RX_DATA_UNDERUN) || + (td->status & USB_TD_TX_ER_STALL) || + (td->status & USB_TD_RX_ER_PID) || + (++td->error_cnt >= 3)) { + ed->state = FHCI_ED_HALTED; + td_done = true; + + if (td->status & USB_TD_RX_DATA_UNDERUN) { + fhci_dbg(usb->fhci, "td err fu\n"); + td->toggle = !td->toggle; + td->actual_len += trans_len; + } else { + fhci_dbg(usb->fhci, "td err f!u\n"); + } + } else { + fhci_dbg(usb->fhci, "td err !f\n"); + /* it is not a fatal error -retry this transaction */ + td->nak_cnt = 0; + td->error_cnt++; + td->status = USB_TD_OK; + } + } else if (td->status & USB_TD_TX_ER_NAK) { + /* there was a NAK response */ + fhci_vdbg(usb->fhci, "td nack\n"); + td->nak_cnt++; + td->error_cnt = 0; + td->status = USB_TD_OK; + } else { + /* there was no error on transaction */ + td->error_cnt = 0; + td->nak_cnt = 0; + td->toggle = !td->toggle; + td->actual_len += trans_len; + + if (td->len == td->actual_len) + td_done = true; + } + + if (td_done) + fhci_move_td_from_ed_to_done_list(usb, ed); +} + +/* + * Flush all transmitted packets from BDs + * This routine is called when disabling the USB port to flush all + * transmissions that are allready scheduled in the BDs + */ +void fhci_flush_all_transmissions(struct fhci_usb *usb) +{ + u8 mode; + struct td *td; + + mode = in_8(&usb->fhci->regs->usb_mod); + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN); + + fhci_flush_bds(usb); + + while ((td = fhci_peek_td_from_frame(usb->actual_frame)) != NULL) { + struct packet *pkt = td->pkt; + + pkt->status = USB_TD_TX_ER_TIMEOUT; + fhci_transaction_confirm(usb, pkt); + } + + usb->actual_frame->frame_status = FRAME_END_TRANSMISSION; + + /* reset the event register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + /* enable the USB controller */ + out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN); +} + +/* + * This function forms the packet and transmit the packet. This function + * will handle all endpoint type:ISO,interrupt,control and bulk + */ +static int add_packet(struct fhci_usb *usb, struct ed *ed, struct td *td) +{ + u32 fw_transaction_time, len = 0; + struct packet *pkt; + u8 *data = NULL; + + /* calcalate data address,len and toggle and then add the transaction */ + if (td->toggle == USB_TD_TOGGLE_CARRY) + td->toggle = ed->toggle_carry; + + switch (ed->mode) { + case FHCI_TF_ISO: + len = td->len; + if (td->type != FHCI_TA_IN) + data = td->data; + break; + case FHCI_TF_CTRL: + case FHCI_TF_BULK: + len = min(td->len - td->actual_len, ed->max_pkt_size); + if (!((td->type == FHCI_TA_IN) && + ((len + td->actual_len) == td->len))) + data = td->data + td->actual_len; + break; + case FHCI_TF_INTR: + len = min(td->len, ed->max_pkt_size); + if (!((td->type == FHCI_TA_IN) && + ((td->len + CRC_SIZE) >= ed->max_pkt_size))) + data = td->data; + break; + default: + break; + } + + if (usb->port_status == FHCI_PORT_FULL) + fw_transaction_time = (((len + PROTOCOL_OVERHEAD) * 11) >> 4); + else + fw_transaction_time = ((len + PROTOCOL_OVERHEAD) * 6); + + /* check if there's enough space in this frame to submit this TD */ + if (usb->actual_frame->total_bytes + len + PROTOCOL_OVERHEAD >= + usb->max_bytes_per_frame) { + fhci_vdbg(usb->fhci, "not enough space in this frame: " + "%d %d %d\n", usb->actual_frame->total_bytes, len, + usb->max_bytes_per_frame); + return -1; + } + + /* check if there's enough time in this frame to submit this TD */ + if (usb->actual_frame->frame_status != FRAME_IS_PREPARED && + (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION || + (fw_transaction_time + usb->sw_transaction_time >= + 1000 - fhci_get_sof_timer_count(usb)))) { + fhci_dbg(usb->fhci, "not enough time in this frame\n"); + return -1; + } + + /* update frame object fields before transmitting */ + pkt = cq_get(usb->ep0->empty_frame_Q); + if (!pkt) { + fhci_dbg(usb->fhci, "there is no empty frame\n"); + return -1; + } + td->pkt = pkt; + + pkt->info = 0; + if (data == NULL) { + data = cq_get(usb->ep0->dummy_packets_Q); + BUG_ON(!data); + pkt->info = PKT_DUMMY_PACKET; + } + pkt->data = data; + pkt->len = len; + pkt->status = USB_TD_OK; + /* update TD status field before transmitting */ + td->status = USB_TD_INPROGRESS; + /* update actual frame time object with the actual transmission */ + usb->actual_frame->total_bytes += (len + PROTOCOL_OVERHEAD); + fhci_add_td_to_frame(usb->actual_frame, td); + + if (usb->port_status != FHCI_PORT_FULL && + usb->port_status != FHCI_PORT_LOW) { + pkt->status = USB_TD_TX_ER_TIMEOUT; + pkt->len = 0; + fhci_transaction_confirm(usb, pkt); + } else if (fhci_host_transaction(usb, pkt, td->type, ed->dev_addr, + ed->ep_addr, ed->mode, ed->speed, td->toggle)) { + /* remove TD from actual frame */ + list_del_init(&td->frame_lh); + td->status = USB_TD_OK; + if (pkt->info & PKT_DUMMY_PACKET) + cq_put(usb->ep0->dummy_packets_Q, pkt->data); + recycle_frame(usb, pkt); + usb->actual_frame->total_bytes -= (len + PROTOCOL_OVERHEAD); + fhci_err(usb->fhci, "host transaction failed\n"); + return -1; + } + + return len; +} + +static void move_head_to_tail(struct list_head *list) +{ + struct list_head *node = list->next; + + if (!list_empty(list)) { + list_del(node); + list_add_tail(node, list); + } +} + +/* + * This function goes through the endpoint list and schedules the + * transactions within this list + */ +static int scan_ed_list(struct fhci_usb *usb, + struct list_head *list, enum fhci_tf_mode list_type) +{ + static const int frame_part[4] = { + [FHCI_TF_CTRL] = MAX_BYTES_PER_FRAME, + [FHCI_TF_ISO] = (MAX_BYTES_PER_FRAME * + MAX_PERIODIC_FRAME_USAGE) / 100, + [FHCI_TF_BULK] = MAX_BYTES_PER_FRAME, + [FHCI_TF_INTR] = (MAX_BYTES_PER_FRAME * + MAX_PERIODIC_FRAME_USAGE) / 100 + }; + struct ed *ed; + struct td *td; + int ans = 1; + u32 save_transaction_time = usb->sw_transaction_time; + + list_for_each_entry(ed, list, node) { + td = ed->td_head; + + if (!td || (td && td->status == USB_TD_INPROGRESS)) + continue; + + if (ed->state != FHCI_ED_OPER) { + if (ed->state == FHCI_ED_URB_DEL) { + td->status = USB_TD_OK; + fhci_move_td_from_ed_to_done_list(usb, ed); + ed->state = FHCI_ED_SKIP; + } + continue; + } + + /* + * if it isn't interrupt pipe or it is not iso pipe and the + * interval time passed + */ + if ((list_type == FHCI_TF_INTR || list_type == FHCI_TF_ISO) && + (((usb->actual_frame->frame_num - + td->start_frame) & 0x7ff) < td->interval)) + continue; + + if (add_packet(usb, ed, td) < 0) + continue; + + /* update time stamps in the TD */ + td->start_frame = usb->actual_frame->frame_num; + usb->sw_transaction_time += save_transaction_time; + + if (usb->actual_frame->total_bytes >= + usb->max_bytes_per_frame) { + usb->actual_frame->frame_status = + FRAME_DATA_END_TRANSMISSION; + fhci_push_dummy_bd(usb->ep0); + ans = 0; + break; + } + + if (usb->actual_frame->total_bytes >= frame_part[list_type]) + break; + } + + /* be fair to each ED(move list head around) */ + move_head_to_tail(list); + usb->sw_transaction_time = save_transaction_time; + + return ans; +} + +static u32 rotate_frames(struct fhci_usb *usb) +{ + struct fhci_hcd *fhci = usb->fhci; + + if (!list_empty(&usb->actual_frame->tds_list)) { + if ((((in_be16(&fhci->pram->frame_num) & 0x07ff) - + usb->actual_frame->frame_num) & 0x7ff) > 5) + fhci_flush_actual_frame(usb); + else + return -EINVAL; + } + + usb->actual_frame->frame_status = FRAME_IS_PREPARED; + usb->actual_frame->frame_num = in_be16(&fhci->pram->frame_num) & 0x7ff; + usb->actual_frame->total_bytes = 0; + + return 0; +} + +/* + * This function schedule the USB transaction and will process the + * endpoint in the following order: iso, interrupt, control and bulk. + */ +void fhci_schedule_transactions(struct fhci_usb *usb) +{ + int left = 1; + + if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION) + if (rotate_frames(usb) != 0) + return; + + if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION) + return; + + if (usb->actual_frame->total_bytes == 0) { + /* + * schedule the next available ISO transfer + *or next stage of the ISO transfer + */ + scan_ed_list(usb, &usb->hc_list->iso_list, FHCI_TF_ISO); + + /* + * schedule the next available interrupt transfer or + * the next stage of the interrupt transfer + */ + scan_ed_list(usb, &usb->hc_list->intr_list, FHCI_TF_INTR); + + /* + * schedule the next available control transfer + * or the next stage of the control transfer + */ + left = scan_ed_list(usb, &usb->hc_list->ctrl_list, + FHCI_TF_CTRL); + } + + /* + * schedule the next available bulk transfer or the next stage of the + * bulk transfer + */ + if (left > 0) + scan_ed_list(usb, &usb->hc_list->bulk_list, FHCI_TF_BULK); +} + +/* Handles SOF interrupt */ +static void sof_interrupt(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + if ((usb->port_status == FHCI_PORT_DISABLED) && + (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_CONNECTION) && + !(usb->vroot_hub->port.wPortChange & USB_PORT_STAT_C_CONNECTION)) { + if (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_LOW_SPEED) + usb->port_status = FHCI_PORT_LOW; + else + usb->port_status = FHCI_PORT_FULL; + /* Disable IDLE */ + usb->saved_msk &= ~USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + } + + gtm_set_exact_timer16(fhci->timer, usb->max_frame_usage, false); + + fhci_host_transmit_actual_frame(usb); + usb->actual_frame->frame_status = FRAME_IS_TRANSMITTED; + + fhci_schedule_transactions(usb); +} + +/* Handles device disconnected interrupt on port */ +void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_usb_disable_interrupt(usb); + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS); + usb->port_status = FHCI_PORT_DISABLED; + + fhci_stop_sof_timer(fhci); + + /* Enable IDLE since we want to know if something comes along */ + usb->saved_msk |= USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + + usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_CONNECTION; + usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_CONNECTION; + usb->max_bytes_per_frame = 0; + fhci_usb_enable_interrupt(usb); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +/* detect a new device connected on the USB port */ +void fhci_device_connected_interrupt(struct fhci_hcd *fhci) +{ + + struct fhci_usb *usb = fhci->usb_lld; + int state; + int ret; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_usb_disable_interrupt(usb); + state = fhci_ioports_check_bus_state(fhci); + + /* low-speed device was connected to the USB port */ + if (state == 1) { + ret = qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3); + if (ret) { + fhci_warn(fhci, "Low-Speed device is not supported, " + "try use BRGx\n"); + goto out; + } + + usb->port_status = FHCI_PORT_LOW; + setbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS); + usb->vroot_hub->port.wPortStatus |= + (USB_PORT_STAT_LOW_SPEED | + USB_PORT_STAT_CONNECTION); + usb->vroot_hub->port.wPortChange |= + USB_PORT_STAT_C_CONNECTION; + usb->max_bytes_per_frame = + (MAX_BYTES_PER_FRAME >> 3) - 7; + fhci_port_enable(usb); + } else if (state == 2) { + ret = qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK); + if (ret) { + fhci_warn(fhci, "Full-Speed device is not supported, " + "try use CLKx\n"); + goto out; + } + + usb->port_status = FHCI_PORT_FULL; + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS); + usb->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_LOW_SPEED; + usb->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_CONNECTION; + usb->vroot_hub->port.wPortChange |= + USB_PORT_STAT_C_CONNECTION; + usb->max_bytes_per_frame = (MAX_BYTES_PER_FRAME - 15); + fhci_port_enable(usb); + } +out: + fhci_usb_enable_interrupt(usb); + fhci_dbg(fhci, "<- %s\n", __func__); +} + +irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd) +{ + struct usb_hcd *hcd = _hcd; + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + struct fhci_usb *usb = fhci->usb_lld; + + spin_lock(&fhci->lock); + + gtm_set_exact_timer16(fhci->timer, 1000, false); + + if (usb->actual_frame->frame_status == FRAME_IS_TRANSMITTED) { + usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION; + fhci_push_dummy_bd(usb->ep0); + } + + fhci_schedule_transactions(usb); + + spin_unlock(&fhci->lock); + + return IRQ_HANDLED; +} + +/* Cancel transmission on the USB endpoint */ +static void abort_transmission(struct fhci_usb *usb) +{ + fhci_dbg(usb->fhci, "-> %s\n", __func__); + /* issue stop Tx command */ + qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0); + /* flush Tx FIFOs */ + out_8(&usb->fhci->regs->usb_comm, USB_CMD_FLUSH_FIFO | EP_ZERO); + udelay(1000); + /* reset Tx BDs */ + fhci_flush_bds(usb); + /* issue restart Tx command */ + qe_issue_cmd(QE_USB_RESTART_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0); + fhci_dbg(usb->fhci, "<- %s\n", __func__); +} + +irqreturn_t fhci_irq(struct usb_hcd *hcd) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + struct fhci_usb *usb; + u16 usb_er = 0; + unsigned long flags; + + spin_lock_irqsave(&fhci->lock, flags); + + usb = fhci->usb_lld; + + usb_er |= in_be16(&usb->fhci->regs->usb_event) & + in_be16(&usb->fhci->regs->usb_mask); + + /* clear event bits for next time */ + out_be16(&usb->fhci->regs->usb_event, usb_er); + + fhci_dbg_isr(fhci, usb_er); + + if (usb_er & USB_E_RESET_MASK) { + if ((usb->port_status == FHCI_PORT_FULL) || + (usb->port_status == FHCI_PORT_LOW)) { + fhci_device_disconnected_interrupt(fhci); + usb_er &= ~USB_E_IDLE_MASK; + } else if (usb->port_status == FHCI_PORT_WAITING) { + usb->port_status = FHCI_PORT_DISCONNECTING; + + /* Turn on IDLE since we want to disconnect */ + usb->saved_msk |= USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_event, + usb->saved_msk); + } else if (usb->port_status == FHCI_PORT_DISABLED) { + if (fhci_ioports_check_bus_state(fhci) == 1 && + usb->port_status != FHCI_PORT_LOW && + usb->port_status != FHCI_PORT_FULL) + fhci_device_connected_interrupt(fhci); + } + usb_er &= ~USB_E_RESET_MASK; + } + + if (usb_er & USB_E_MSF_MASK) { + abort_transmission(fhci->usb_lld); + usb_er &= ~USB_E_MSF_MASK; + } + + if (usb_er & (USB_E_SOF_MASK | USB_E_SFT_MASK)) { + sof_interrupt(fhci); + usb_er &= ~(USB_E_SOF_MASK | USB_E_SFT_MASK); + } + + if (usb_er & USB_E_TXB_MASK) { + fhci_tx_conf_interrupt(fhci->usb_lld); + usb_er &= ~USB_E_TXB_MASK; + } + + if (usb_er & USB_E_TXE1_MASK) { + fhci_tx_conf_interrupt(fhci->usb_lld); + usb_er &= ~USB_E_TXE1_MASK; + } + + if (usb_er & USB_E_IDLE_MASK) { + if (usb->port_status == FHCI_PORT_DISABLED && + usb->port_status != FHCI_PORT_LOW && + usb->port_status != FHCI_PORT_FULL) { + usb_er &= ~USB_E_RESET_MASK; + fhci_device_connected_interrupt(fhci); + } else if (usb->port_status == + FHCI_PORT_DISCONNECTING) { + /* XXX usb->port_status = FHCI_PORT_WAITING; */ + /* Disable IDLE */ + usb->saved_msk &= ~USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, + usb->saved_msk); + } else { + fhci_dbg_isr(fhci, -1); + } + + usb_er &= ~USB_E_IDLE_MASK; + } + + spin_unlock_irqrestore(&fhci->lock, flags); + + return IRQ_HANDLED; +} + + +/* + * Process normal completions(error or sucess) and clean the schedule. + * + * This is the main path for handing urbs back to drivers. The only other patth + * is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning + * the (re-reversed) done list as this does. + */ +static void process_done_list(unsigned long data) +{ + struct urb *urb; + struct ed *ed; + struct td *td; + struct urb_priv *urb_priv; + struct fhci_hcd *fhci = (struct fhci_hcd *)data; + + disable_irq(fhci->timer->irq); + disable_irq(fhci_to_hcd(fhci)->irq); + spin_lock(&fhci->lock); + + td = fhci_remove_td_from_done_list(fhci->hc_list); + while (td != NULL) { + urb = td->urb; + urb_priv = urb->hcpriv; + ed = td->ed; + + /* update URB's length and status from TD */ + fhci_done_td(urb, td); + urb_priv->tds_cnt++; + + /* + * if all this urb's TDs are done, call complete() + * Interrupt transfers are the onley special case: + * they are reissued,until "deleted" by usb_unlink_urb + * (real work done in a SOF intr, by process_del_list) + */ + if (urb_priv->tds_cnt == urb_priv->num_of_tds) { + fhci_urb_complete_free(fhci, urb); + } else if (urb_priv->state == URB_DEL && + ed->state == FHCI_ED_SKIP) { + fhci_del_ed_list(fhci, ed); + ed->state = FHCI_ED_OPER; + } else if (ed->state == FHCI_ED_HALTED) { + urb_priv->state = URB_DEL; + ed->state = FHCI_ED_URB_DEL; + fhci_del_ed_list(fhci, ed); + ed->state = FHCI_ED_OPER; + } + + td = fhci_remove_td_from_done_list(fhci->hc_list); + } + + spin_unlock(&fhci->lock); + enable_irq(fhci->timer->irq); + enable_irq(fhci_to_hcd(fhci)->irq); +} + +DECLARE_TASKLET(fhci_tasklet, process_done_list, 0); + +/* transfer complted callback */ +u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci) +{ + if (!fhci->process_done_task->state) + tasklet_schedule(fhci->process_done_task); + return 0; +} + +/* + * adds urb to the endpoint descriptor list + * arguments: + * fhci data structure for the Low level host controller + * ep USB Host endpoint data structure + * urb USB request block data structure + */ +void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb) +{ + struct ed *ed = urb->ep->hcpriv; + struct urb_priv *urb_priv = urb->hcpriv; + u32 data_len = urb->transfer_buffer_length; + int urb_state = 0; + int toggle = 0; + struct td *td; + u8 *data; + u16 cnt = 0; + + if (ed == NULL) { + ed = fhci_get_empty_ed(fhci); + ed->dev_addr = usb_pipedevice(urb->pipe); + ed->ep_addr = usb_pipeendpoint(urb->pipe); + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + ed->mode = FHCI_TF_CTRL; + break; + case PIPE_BULK: + ed->mode = FHCI_TF_BULK; + break; + case PIPE_INTERRUPT: + ed->mode = FHCI_TF_INTR; + break; + case PIPE_ISOCHRONOUS: + ed->mode = FHCI_TF_ISO; + break; + default: + break; + } + ed->speed = (urb->dev->speed == USB_SPEED_LOW) ? + FHCI_LOW_SPEED : FHCI_FULL_SPEED; + ed->max_pkt_size = usb_maxpacket(urb->dev, + urb->pipe, usb_pipeout(urb->pipe)); + urb->ep->hcpriv = ed; + fhci_dbg(fhci, "new ep speed=%d max_pkt_size=%d\n", + ed->speed, ed->max_pkt_size); + } + + /* for ISO transfer calculate start frame index */ + if (ed->mode == FHCI_TF_ISO && urb->transfer_flags & URB_ISO_ASAP) + urb->start_frame = ed->td_head ? ed->last_iso + 1 : + get_frame_num(fhci); + + /* + * OHCI handles the DATA toggle itself,we just use the USB + * toggle bits + */ + if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe))) + toggle = USB_TD_TOGGLE_CARRY; + else { + toggle = USB_TD_TOGGLE_DATA0; + usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe), 1); + } + + urb_priv->tds_cnt = 0; + urb_priv->ed = ed; + if (data_len > 0) + data = urb->transfer_buffer; + else + data = NULL; + + switch (ed->mode) { + case FHCI_TF_BULK: + if (urb->transfer_flags & URB_ZERO_PACKET && + urb->transfer_buffer_length > 0 && + ((urb->transfer_buffer_length % + usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe))) == 0)) + urb_state = US_BULK0; + while (data_len > 4096) { + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + cnt ? USB_TD_TOGGLE_CARRY : + toggle, + data, 4096, 0, 0, true); + data += 4096; + data_len -= 4096; + cnt++; + } + + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN, + cnt ? USB_TD_TOGGLE_CARRY : toggle, + data, data_len, 0, 0, true); + cnt++; + + if (urb->transfer_flags & URB_ZERO_PACKET && + cnt < urb_priv->num_of_tds) { + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + USB_TD_TOGGLE_CARRY, NULL, 0, 0, 0, true); + cnt++; + } + break; + case FHCI_TF_INTR: + urb->start_frame = get_frame_num(fhci) + 1; + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN, + USB_TD_TOGGLE_DATA0, data, data_len, + urb->interval, urb->start_frame, true); + break; + case FHCI_TF_CTRL: + ed->dev_addr = usb_pipedevice(urb->pipe); + ed->max_pkt_size = usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe)); + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, FHCI_TA_SETUP, + USB_TD_TOGGLE_DATA0, urb->setup_packet, 8, 0, 0, true); + + if (data_len > 0) { + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + USB_TD_TOGGLE_DATA1, data, data_len, 0, 0, + true); + } + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, + usb_pipeout(urb->pipe) ? FHCI_TA_IN : FHCI_TA_OUT, + USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true); + urb_state = US_CTRL_SETUP; + break; + case FHCI_TF_ISO: + for (cnt = 0; cnt < urb->number_of_packets; cnt++) { + u16 frame = urb->start_frame; + + /* + * FIXME scheduling should handle frame counter + * roll-around ... exotic case (and OHCI has + * a 2^16 iso range, vs other HCs max of 2^10) + */ + frame += cnt * urb->interval; + frame &= 0x07ff; + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + USB_TD_TOGGLE_DATA0, + data + urb->iso_frame_desc[cnt].offset, + urb->iso_frame_desc[cnt].length, + urb->interval, frame, true); + } + break; + default: + break; + } + + /* + * set the state of URB + * control pipe:3 states -- setup,data,status + * interrupt and bulk pipe:1 state -- data + */ + urb->pipe &= ~0x1f; + urb->pipe |= urb_state & 0x1f; + + urb_priv->state = URB_INPROGRESS; + + if (!ed->td_head) { + ed->state = FHCI_ED_OPER; + switch (ed->mode) { + case FHCI_TF_CTRL: + list_add(&ed->node, &fhci->hc_list->ctrl_list); + break; + case FHCI_TF_BULK: + list_add(&ed->node, &fhci->hc_list->bulk_list); + break; + case FHCI_TF_INTR: + list_add(&ed->node, &fhci->hc_list->intr_list); + break; + case FHCI_TF_ISO: + list_add(&ed->node, &fhci->hc_list->iso_list); + break; + default: + break; + } + } + + fhci_add_tds_to_ed(ed, urb_priv->tds, urb_priv->num_of_tds); + fhci->active_urbs++; +} diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c new file mode 100644 index 000000000000..b40332290319 --- /dev/null +++ b/drivers/usb/host/fhci-tds.c @@ -0,0 +1,626 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/io.h> +#include <linux/usb.h> +#include "../core/hcd.h" +#include "fhci.h" + +#define DUMMY_BD_BUFFER 0xdeadbeef +#define DUMMY2_BD_BUFFER 0xbaadf00d + +/* Transaction Descriptors bits */ +#define TD_R 0x8000 /* ready bit */ +#define TD_W 0x2000 /* wrap bit */ +#define TD_I 0x1000 /* interrupt on completion */ +#define TD_L 0x0800 /* last */ +#define TD_TC 0x0400 /* transmit CRC */ +#define TD_CNF 0x0200 /* CNF - Must be always 1 */ +#define TD_LSP 0x0100 /* Low-speed transaction */ +#define TD_PID 0x00c0 /* packet id */ +#define TD_RXER 0x0020 /* Rx error or not */ + +#define TD_NAK 0x0010 /* No ack. */ +#define TD_STAL 0x0008 /* Stall recieved */ +#define TD_TO 0x0004 /* time out */ +#define TD_UN 0x0002 /* underrun */ +#define TD_NO 0x0010 /* Rx Non Octet Aligned Packet */ +#define TD_AB 0x0008 /* Frame Aborted */ +#define TD_CR 0x0004 /* CRC Error */ +#define TD_OV 0x0002 /* Overrun */ +#define TD_BOV 0x0001 /* Buffer Overrun */ + +#define TD_ERRORS (TD_NAK | TD_STAL | TD_TO | TD_UN | \ + TD_NO | TD_AB | TD_CR | TD_OV | TD_BOV) + +#define TD_PID_DATA0 0x0080 /* Data 0 toggle */ +#define TD_PID_DATA1 0x00c0 /* Data 1 toggle */ +#define TD_PID_TOGGLE 0x00c0 /* Data 0/1 toggle mask */ + +#define TD_TOK_SETUP 0x0000 +#define TD_TOK_OUT 0x4000 +#define TD_TOK_IN 0x8000 +#define TD_ISO 0x1000 +#define TD_ENDP 0x0780 +#define TD_ADDR 0x007f + +#define TD_ENDP_SHIFT 7 + +struct usb_td { + __be16 status; + __be16 length; + __be32 buf_ptr; + __be16 extra; + __be16 reserved; +}; + +static struct usb_td __iomem *next_bd(struct usb_td __iomem *base, + struct usb_td __iomem *td, + u16 status) +{ + if (status & TD_W) + return base; + else + return ++td; +} + +void fhci_push_dummy_bd(struct endpoint *ep) +{ + if (ep->already_pushed_dummy_bd == false) { + u16 td_status = in_be16(&ep->empty_td->status); + + out_be32(&ep->empty_td->buf_ptr, DUMMY_BD_BUFFER); + /* get the next TD in the ring */ + ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status); + ep->already_pushed_dummy_bd = true; + } +} + +/* destroy an USB endpoint */ +void fhci_ep0_free(struct fhci_usb *usb) +{ + struct endpoint *ep; + int size; + + ep = usb->ep0; + if (ep) { + if (ep->td_base) + cpm_muram_free(cpm_muram_offset(ep->td_base)); + + if (ep->conf_frame_Q) { + size = cq_howmany(ep->conf_frame_Q); + for (; size; size--) { + struct packet *pkt = cq_get(ep->conf_frame_Q); + + kfree(pkt); + } + cq_delete(ep->conf_frame_Q); + } + + if (ep->empty_frame_Q) { + size = cq_howmany(ep->empty_frame_Q); + for (; size; size--) { + struct packet *pkt = cq_get(ep->empty_frame_Q); + + kfree(pkt); + } + cq_delete(ep->empty_frame_Q); + } + + if (ep->dummy_packets_Q) { + size = cq_howmany(ep->dummy_packets_Q); + for (; size; size--) { + u8 *buff = cq_get(ep->dummy_packets_Q); + + kfree(buff); + } + cq_delete(ep->dummy_packets_Q); + } + + kfree(ep); + usb->ep0 = NULL; + } +} + +/* + * create the endpoint structure + * + * arguments: + * usb A pointer to the data structure of the USB + * data_mem The data memory partition(BUS) + * ring_len TD ring length + */ +u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem, + u32 ring_len) +{ + struct endpoint *ep; + struct usb_td __iomem *td; + unsigned long ep_offset; + char *err_for = "enpoint PRAM"; + int ep_mem_size; + u32 i; + + /* we need at least 3 TDs in the ring */ + if (!(ring_len > 2)) { + fhci_err(usb->fhci, "illegal TD ring length parameters\n"); + return -EINVAL; + } + + ep = kzalloc(sizeof(*ep), GFP_KERNEL); + if (!ep) + return -ENOMEM; + + ep_mem_size = ring_len * sizeof(*td) + sizeof(struct fhci_ep_pram); + ep_offset = cpm_muram_alloc(ep_mem_size, 32); + if (IS_ERR_VALUE(ep_offset)) + goto err; + ep->td_base = cpm_muram_addr(ep_offset); + + /* zero all queue pointers */ + ep->conf_frame_Q = cq_new(ring_len + 2); + ep->empty_frame_Q = cq_new(ring_len + 2); + ep->dummy_packets_Q = cq_new(ring_len + 2); + if (!ep->conf_frame_Q || !ep->empty_frame_Q || !ep->dummy_packets_Q) { + err_for = "frame_queues"; + goto err; + } + + for (i = 0; i < (ring_len + 1); i++) { + struct packet *pkt; + u8 *buff; + + pkt = kmalloc(sizeof(*pkt), GFP_KERNEL); + if (!pkt) { + err_for = "frame"; + goto err; + } + + buff = kmalloc(1028 * sizeof(*buff), GFP_KERNEL); + if (!buff) { + kfree(pkt); + err_for = "buffer"; + goto err; + } + cq_put(ep->empty_frame_Q, pkt); + cq_put(ep->dummy_packets_Q, buff); + } + + /* we put the endpoint parameter RAM right behind the TD ring */ + ep->ep_pram_ptr = (void __iomem *)ep->td_base + sizeof(*td) * ring_len; + + ep->conf_td = ep->td_base; + ep->empty_td = ep->td_base; + + ep->already_pushed_dummy_bd = false; + + /* initialize tds */ + td = ep->td_base; + for (i = 0; i < ring_len; i++) { + out_be32(&td->buf_ptr, 0); + out_be16(&td->status, 0); + out_be16(&td->length, 0); + out_be16(&td->extra, 0); + td++; + } + td--; + out_be16(&td->status, TD_W); /* for last TD set Wrap bit */ + out_be16(&td->length, 0); + + /* endpoint structure has been created */ + usb->ep0 = ep; + + return 0; +err: + fhci_ep0_free(usb); + kfree(ep); + fhci_err(usb->fhci, "no memory for the %s\n", err_for); + return -ENOMEM; +} + +/* + * initialize the endpoint register according to the given parameters + * + * artuments: + * usb A pointer to the data strucutre of the USB + * ep A pointer to the endpoint structre + * data_mem The data memory partition(BUS) + */ +void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep, + enum fhci_mem_alloc data_mem) +{ + u8 rt; + + /* set the endpoint registers according to the endpoint */ + out_be16(&usb->fhci->regs->usb_ep[0], + USB_TRANS_CTR | USB_EP_MF | USB_EP_RTE); + out_be16(&usb->fhci->pram->ep_ptr[0], + cpm_muram_offset(ep->ep_pram_ptr)); + + rt = (BUS_MODE_BO_BE | BUS_MODE_GBL); +#ifdef MULTI_DATA_BUS + if (data_mem == MEM_SECONDARY) + rt |= BUS_MODE_DTB; +#endif + out_8(&ep->ep_pram_ptr->rx_func_code, rt); + out_8(&ep->ep_pram_ptr->tx_func_code, rt); + out_be16(&ep->ep_pram_ptr->rx_buff_len, 1028); + out_be16(&ep->ep_pram_ptr->rx_base, 0); + out_be16(&ep->ep_pram_ptr->tx_base, cpm_muram_offset(ep->td_base)); + out_be16(&ep->ep_pram_ptr->rx_bd_ptr, 0); + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, cpm_muram_offset(ep->td_base)); + out_be32(&ep->ep_pram_ptr->tx_state, 0); +} + +/* + * Collect the submitted frames and inform the application about them + * It is also prepearing the TDs for new frames. If the Tx interrupts + * are diabled, the application should call that routine to get + * confirmation about the submitted frames. Otherwise, the routine is + * called frome the interrupt service routine during the Tx interrupt. + * In that case the application is informed by calling the application + * specific 'fhci_transaction_confirm' routine + */ +static void fhci_td_transaction_confirm(struct fhci_usb *usb) +{ + struct endpoint *ep = usb->ep0; + struct packet *pkt; + struct usb_td __iomem *td; + u16 extra_data; + u16 td_status; + u16 td_length; + u32 buf; + + /* + * collect transmitted BDs from the chip. The routine clears all BDs + * with R bit = 0 and the pointer to data buffer is not NULL, that is + * BDs which point to the transmitted data buffer + */ + while (1) { + td = ep->conf_td; + td_status = in_be16(&td->status); + td_length = in_be16(&td->length); + buf = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + + /* check if the TD is empty */ + if (!(!(td_status & TD_R) && ((td_status & ~TD_W) || buf))) + break; + /* check if it is a dummy buffer */ + else if ((buf == DUMMY_BD_BUFFER) && !(td_status & ~TD_W)) + break; + + /* mark TD as empty */ + clrbits16(&td->status, ~TD_W); + out_be16(&td->length, 0); + out_be32(&td->buf_ptr, 0); + out_be16(&td->extra, 0); + /* advance the TD pointer */ + ep->conf_td = next_bd(ep->td_base, ep->conf_td, td_status); + + /* check if it is a dummy buffer(type2) */ + if ((buf == DUMMY2_BD_BUFFER) && !(td_status & ~TD_W)) + continue; + + pkt = cq_get(ep->conf_frame_Q); + if (!pkt) + fhci_err(usb->fhci, "no frame to confirm\n"); + + if (td_status & TD_ERRORS) { + if (td_status & TD_RXER) { + if (td_status & TD_CR) + pkt->status = USB_TD_RX_ER_CRC; + else if (td_status & TD_AB) + pkt->status = USB_TD_RX_ER_BITSTUFF; + else if (td_status & TD_OV) + pkt->status = USB_TD_RX_ER_OVERUN; + else if (td_status & TD_BOV) + pkt->status = USB_TD_RX_DATA_OVERUN; + else if (td_status & TD_NO) + pkt->status = USB_TD_RX_ER_NONOCT; + else + fhci_err(usb->fhci, "illegal error " + "occured\n"); + } else if (td_status & TD_NAK) + pkt->status = USB_TD_TX_ER_NAK; + else if (td_status & TD_TO) + pkt->status = USB_TD_TX_ER_TIMEOUT; + else if (td_status & TD_UN) + pkt->status = USB_TD_TX_ER_UNDERUN; + else if (td_status & TD_STAL) + pkt->status = USB_TD_TX_ER_STALL; + else + fhci_err(usb->fhci, "illegal error occured\n"); + } else if ((extra_data & TD_TOK_IN) && + pkt->len > td_length - CRC_SIZE) { + pkt->status = USB_TD_RX_DATA_UNDERUN; + } + + if (extra_data & TD_TOK_IN) + pkt->len = td_length - CRC_SIZE; + else if (pkt->info & PKT_ZLP) + pkt->len = 0; + else + pkt->len = td_length; + + fhci_transaction_confirm(usb, pkt); + } +} + +/* + * Submitting a data frame to a specified endpoint of a USB device + * The frame is put in the driver's transmit queue for this endpoint + * + * Arguments: + * usb A pointer to the USB structure + * pkt A pointer to the user frame structure + * trans_type Transaction tyep - IN,OUT or SETUP + * dest_addr Device address - 0~127 + * dest_ep Endpoint number of the device - 0~16 + * trans_mode Pipe type - ISO,Interrupt,bulk or control + * dest_speed USB speed - Low speed or FULL speed + * data_toggle Data sequence toggle - 0 or 1 + */ +u32 fhci_host_transaction(struct fhci_usb *usb, + struct packet *pkt, + enum fhci_ta_type trans_type, + u8 dest_addr, + u8 dest_ep, + enum fhci_tf_mode trans_mode, + enum fhci_speed dest_speed, u8 data_toggle) +{ + struct endpoint *ep = usb->ep0; + struct usb_td __iomem *td; + u16 extra_data; + u16 td_status; + + fhci_usb_disable_interrupt(usb); + /* start from the next BD that should be filled */ + td = ep->empty_td; + td_status = in_be16(&td->status); + + if (td_status & TD_R && in_be16(&td->length)) { + /* if the TD is not free */ + fhci_usb_enable_interrupt(usb); + return -1; + } + + /* get the next TD in the ring */ + ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status); + fhci_usb_enable_interrupt(usb); + pkt->priv_data = td; + out_be32(&td->buf_ptr, virt_to_phys(pkt->data)); + /* sets up transaction parameters - addr,endp,dir,and type */ + extra_data = (dest_ep << TD_ENDP_SHIFT) | dest_addr; + switch (trans_type) { + case FHCI_TA_IN: + extra_data |= TD_TOK_IN; + break; + case FHCI_TA_OUT: + extra_data |= TD_TOK_OUT; + break; + case FHCI_TA_SETUP: + extra_data |= TD_TOK_SETUP; + break; + } + if (trans_mode == FHCI_TF_ISO) + extra_data |= TD_ISO; + out_be16(&td->extra, extra_data); + + /* sets up the buffer descriptor */ + td_status = ((td_status & TD_W) | TD_R | TD_L | TD_I | TD_CNF); + if (!(pkt->info & PKT_NO_CRC)) + td_status |= TD_TC; + + switch (trans_type) { + case FHCI_TA_IN: + if (data_toggle) + pkt->info |= PKT_PID_DATA1; + else + pkt->info |= PKT_PID_DATA0; + break; + default: + if (data_toggle) { + td_status |= TD_PID_DATA1; + pkt->info |= PKT_PID_DATA1; + } else { + td_status |= TD_PID_DATA0; + pkt->info |= PKT_PID_DATA0; + } + break; + } + + if ((dest_speed == FHCI_LOW_SPEED) && + (usb->port_status == FHCI_PORT_FULL)) + td_status |= TD_LSP; + + out_be16(&td->status, td_status); + + /* set up buffer length */ + if (trans_type == FHCI_TA_IN) + out_be16(&td->length, pkt->len + CRC_SIZE); + else + out_be16(&td->length, pkt->len); + + /* put the frame to the confirmation queue */ + cq_put(ep->conf_frame_Q, pkt); + + if (cq_howmany(ep->conf_frame_Q) == 1) + out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO); + + return 0; +} + +/* Reset the Tx BD ring */ +void fhci_flush_bds(struct fhci_usb *usb) +{ + u16 extra_data; + u16 td_status; + u32 buf; + struct usb_td __iomem *td; + struct endpoint *ep = usb->ep0; + + td = ep->td_base; + while (1) { + td_status = in_be16(&td->status); + buf = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + + /* if the TD is not empty - we'll confirm it as Timeout */ + if (td_status & TD_R) + out_be16(&td->status, (td_status & ~TD_R) | TD_TO); + /* if this TD is dummy - let's skip this TD */ + else if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER) + out_be32(&td->buf_ptr, DUMMY2_BD_BUFFER); + /* if this is the last TD - break */ + if (td_status & TD_W) + break; + + td++; + } + + fhci_td_transaction_confirm(usb); + + td = ep->td_base; + do { + out_be16(&td->status, 0); + out_be16(&td->length, 0); + out_be32(&td->buf_ptr, 0); + out_be16(&td->extra, 0); + td++; + } while (!(in_be16(&td->status) & TD_W)); + out_be16(&td->status, TD_W); /* for last TD set Wrap bit */ + out_be16(&td->length, 0); + out_be32(&td->buf_ptr, 0); + out_be16(&td->extra, 0); + + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, + in_be16(&ep->ep_pram_ptr->tx_base)); + out_be32(&ep->ep_pram_ptr->tx_state, 0); + out_be16(&ep->ep_pram_ptr->tx_cnt, 0); + ep->empty_td = ep->td_base; + ep->conf_td = ep->td_base; +} + +/* + * Flush all transmitted packets from TDs in the actual frame. + * This routine is called when something wrong with the controller and + * we want to get rid of the actual frame and start again next frame + */ +void fhci_flush_actual_frame(struct fhci_usb *usb) +{ + u8 mode; + u16 tb_ptr; + u16 extra_data; + u16 td_status; + u32 buf_ptr; + struct usb_td __iomem *td; + struct endpoint *ep = usb->ep0; + + /* disable the USB controller */ + mode = in_8(&usb->fhci->regs->usb_mod); + out_8(&usb->fhci->regs->usb_mod, mode & ~USB_MODE_EN); + + tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr); + td = cpm_muram_addr(tb_ptr); + td_status = in_be16(&td->status); + buf_ptr = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + do { + if (td_status & TD_R) { + out_be16(&td->status, (td_status & ~TD_R) | TD_TO); + } else { + out_be32(&td->buf_ptr, 0); + ep->already_pushed_dummy_bd = false; + break; + } + + /* advance the TD pointer */ + td = next_bd(ep->td_base, td, td_status); + td_status = in_be16(&td->status); + buf_ptr = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + } while ((td_status & TD_R) || buf_ptr); + + fhci_td_transaction_confirm(usb); + + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, + in_be16(&ep->ep_pram_ptr->tx_base)); + out_be32(&ep->ep_pram_ptr->tx_state, 0); + out_be16(&ep->ep_pram_ptr->tx_cnt, 0); + ep->empty_td = ep->td_base; + ep->conf_td = ep->td_base; + + usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION; + + /* reset the event register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + /* enable the USB controller */ + out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN); +} + +/* handles Tx confirm and Tx error interrupt */ +void fhci_tx_conf_interrupt(struct fhci_usb *usb) +{ + fhci_td_transaction_confirm(usb); + + /* + * Schedule another transaction to this frame only if we have + * already confirmed all transaction in the frame. + */ + if (((fhci_get_sof_timer_count(usb) < usb->max_frame_usage) || + (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)) && + (list_empty(&usb->actual_frame->tds_list))) + fhci_schedule_transactions(usb); +} + +void fhci_host_transmit_actual_frame(struct fhci_usb *usb) +{ + u16 tb_ptr; + u16 td_status; + struct usb_td __iomem *td; + struct endpoint *ep = usb->ep0; + + tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr); + td = cpm_muram_addr(tb_ptr); + + if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER) { + struct usb_td __iomem *old_td = td; + + ep->already_pushed_dummy_bd = false; + td_status = in_be16(&td->status); + /* gets the next TD in the ring */ + td = next_bd(ep->td_base, td, td_status); + tb_ptr = cpm_muram_offset(td); + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, tb_ptr); + + /* start transmit only if we have something in the TDs */ + if (in_be16(&td->status) & TD_R) + out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO); + + if (in_be32(&ep->conf_td->buf_ptr) == DUMMY_BD_BUFFER) { + out_be32(&old_td->buf_ptr, 0); + ep->conf_td = next_bd(ep->td_base, ep->conf_td, + td_status); + } else { + out_be32(&old_td->buf_ptr, DUMMY2_BD_BUFFER); + } + } +} diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h new file mode 100644 index 000000000000..7116284ed21a --- /dev/null +++ b/drivers/usb/host/fhci.h @@ -0,0 +1,607 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __FHCI_H +#define __FHCI_H + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/kfifo.h> +#include <linux/io.h> +#include <linux/usb.h> +#include <asm/qe.h> +#include "../core/hcd.h" + +#define USB_CLOCK 48000000 + +#define FHCI_PRAM_SIZE 0x100 + +#define MAX_EDS 32 +#define MAX_TDS 32 + + +/* CRC16 field size */ +#define CRC_SIZE 2 + +/* USB protocol overhead for each frame transmitted from the host */ +#define PROTOCOL_OVERHEAD 7 + +/* Packet structure, info field */ +#define PKT_PID_DATA0 0x80000000 /* PID - Data toggle zero */ +#define PKT_PID_DATA1 0x40000000 /* PID - Data toggle one */ +#define PKT_PID_SETUP 0x20000000 /* PID - Setup bit */ +#define PKT_SETUP_STATUS 0x10000000 /* Setup status bit */ +#define PKT_SETADDR_STATUS 0x08000000 /* Set address status bit */ +#define PKT_SET_HOST_LAST 0x04000000 /* Last data packet */ +#define PKT_HOST_DATA 0x02000000 /* Data packet */ +#define PKT_FIRST_IN_FRAME 0x01000000 /* First packet in the frame */ +#define PKT_TOKEN_FRAME 0x00800000 /* Token packet */ +#define PKT_ZLP 0x00400000 /* Zero length packet */ +#define PKT_IN_TOKEN_FRAME 0x00200000 /* IN token packet */ +#define PKT_OUT_TOKEN_FRAME 0x00100000 /* OUT token packet */ +#define PKT_SETUP_TOKEN_FRAME 0x00080000 /* SETUP token packet */ +#define PKT_STALL_FRAME 0x00040000 /* STALL packet */ +#define PKT_NACK_FRAME 0x00020000 /* NACK packet */ +#define PKT_NO_PID 0x00010000 /* No PID */ +#define PKT_NO_CRC 0x00008000 /* don't append CRC */ +#define PKT_HOST_COMMAND 0x00004000 /* Host command packet */ +#define PKT_DUMMY_PACKET 0x00002000 /* Dummy packet, used for mmm */ +#define PKT_LOW_SPEED_PACKET 0x00001000 /* Low-Speed packet */ + +#define TRANS_OK (0) +#define TRANS_INPROGRESS (-1) +#define TRANS_DISCARD (-2) +#define TRANS_FAIL (-3) + +#define PS_INT 0 +#define PS_DISCONNECTED 1 +#define PS_CONNECTED 2 +#define PS_READY 3 +#define PS_MISSING 4 + +/* Transfer Descriptor status field */ +#define USB_TD_OK 0x00000000 /* TD transmited or received ok */ +#define USB_TD_INPROGRESS 0x80000000 /* TD is being transmitted */ +#define USB_TD_RX_ER_NONOCT 0x40000000 /* Tx Non Octet Aligned Packet */ +#define USB_TD_RX_ER_BITSTUFF 0x20000000 /* Frame Aborted-Received pkt */ +#define USB_TD_RX_ER_CRC 0x10000000 /* CRC error */ +#define USB_TD_RX_ER_OVERUN 0x08000000 /* Over - run occured */ +#define USB_TD_RX_ER_PID 0x04000000 /* wrong PID received */ +#define USB_TD_RX_DATA_UNDERUN 0x02000000 /* shorter than expected */ +#define USB_TD_RX_DATA_OVERUN 0x01000000 /* longer than expected */ +#define USB_TD_TX_ER_NAK 0x00800000 /* NAK handshake */ +#define USB_TD_TX_ER_STALL 0x00400000 /* STALL handshake */ +#define USB_TD_TX_ER_TIMEOUT 0x00200000 /* transmit time out */ +#define USB_TD_TX_ER_UNDERUN 0x00100000 /* transmit underrun */ + +#define USB_TD_ERROR (USB_TD_RX_ER_NONOCT | USB_TD_RX_ER_BITSTUFF | \ + USB_TD_RX_ER_CRC | USB_TD_RX_ER_OVERUN | USB_TD_RX_ER_PID | \ + USB_TD_RX_DATA_UNDERUN | USB_TD_RX_DATA_OVERUN | \ + USB_TD_TX_ER_NAK | USB_TD_TX_ER_STALL | \ + USB_TD_TX_ER_TIMEOUT | USB_TD_TX_ER_UNDERUN) + +/* Transfer Descriptor toggle field */ +#define USB_TD_TOGGLE_DATA0 0 +#define USB_TD_TOGGLE_DATA1 1 +#define USB_TD_TOGGLE_CARRY 2 + +/* #define MULTI_DATA_BUS */ + +/* Bus mode register RBMR/TBMR */ +#define BUS_MODE_GBL 0x20 /* Global snooping */ +#define BUS_MODE_BO 0x18 /* Byte ordering */ +#define BUS_MODE_BO_BE 0x10 /* Byte ordering - Big-endian */ +#define BUS_MODE_DTB 0x02 /* Data bus */ + +/* FHCI QE USB Register Description */ + +/* USB Mode Register bit define */ +#define USB_MODE_EN 0x01 +#define USB_MODE_HOST 0x02 +#define USB_MODE_TEST 0x04 +#define USB_MODE_SFTE 0x08 +#define USB_MODE_RESUME 0x40 +#define USB_MODE_LSS 0x80 + +/* USB Slave Address Register Mask */ +#define USB_SLVADDR_MASK 0x7F + +/* USB Endpoint register define */ +#define USB_EPNUM_MASK 0xF000 +#define USB_EPNUM_SHIFT 12 + +#define USB_TRANS_MODE_SHIFT 8 +#define USB_TRANS_CTR 0x0000 +#define USB_TRANS_INT 0x0100 +#define USB_TRANS_BULK 0x0200 +#define USB_TRANS_ISO 0x0300 + +#define USB_EP_MF 0x0020 +#define USB_EP_RTE 0x0010 + +#define USB_THS_SHIFT 2 +#define USB_THS_MASK 0x000c +#define USB_THS_NORMAL 0x0 +#define USB_THS_IGNORE_IN 0x0004 +#define USB_THS_NACK 0x0008 +#define USB_THS_STALL 0x000c + +#define USB_RHS_SHIFT 0 +#define USB_RHS_MASK 0x0003 +#define USB_RHS_NORMAL 0x0 +#define USB_RHS_IGNORE_OUT 0x0001 +#define USB_RHS_NACK 0x0002 +#define USB_RHS_STALL 0x0003 + +#define USB_RTHS_MASK 0x000f + +/* USB Command Register define */ +#define USB_CMD_STR_FIFO 0x80 +#define USB_CMD_FLUSH_FIFO 0x40 +#define USB_CMD_ISFT 0x20 +#define USB_CMD_DSFT 0x10 +#define USB_CMD_EP_MASK 0x03 + +/* USB Event and Mask Register define */ +#define USB_E_MSF_MASK 0x0800 +#define USB_E_SFT_MASK 0x0400 +#define USB_E_RESET_MASK 0x0200 +#define USB_E_IDLE_MASK 0x0100 +#define USB_E_TXE4_MASK 0x0080 +#define USB_E_TXE3_MASK 0x0040 +#define USB_E_TXE2_MASK 0x0020 +#define USB_E_TXE1_MASK 0x0010 +#define USB_E_SOF_MASK 0x0008 +#define USB_E_BSY_MASK 0x0004 +#define USB_E_TXB_MASK 0x0002 +#define USB_E_RXB_MASK 0x0001 + +/* Freescale USB Host controller registers */ +struct fhci_regs { + u8 usb_mod; /* mode register */ + u8 usb_addr; /* address register */ + u8 usb_comm; /* command register */ + u8 reserved1[1]; + __be16 usb_ep[4]; /* endpoint register */ + u8 reserved2[4]; + __be16 usb_event; /* event register */ + u8 reserved3[2]; + __be16 usb_mask; /* mask register */ + u8 reserved4[1]; + u8 usb_status; /* status register */ + __be16 usb_sof_tmr; /* Start Of Frame timer */ + u8 reserved5[2]; + __be16 usb_frame_num; /* frame number register */ + u8 reserved6[1]; +}; + +/* Freescale USB HOST */ +struct fhci_pram { + __be16 ep_ptr[4]; /* Endpoint porter reg */ + __be32 rx_state; /* Rx internal state */ + __be32 rx_ptr; /* Rx internal data pointer */ + __be16 frame_num; /* Frame number */ + __be16 rx_cnt; /* Rx byte count */ + __be32 rx_temp; /* Rx temp */ + __be32 rx_data_temp; /* Rx data temp */ + __be16 rx_u_ptr; /* Rx microcode return address temp */ + u8 reserved1[2]; /* reserved area */ + __be32 sof_tbl; /* SOF lookup table pointer */ + u8 sof_u_crc_temp; /* SOF micorcode CRC5 temp reg */ + u8 reserved2[0xdb]; +}; + +/* Freescale USB Endpoint*/ +struct fhci_ep_pram { + __be16 rx_base; /* Rx BD base address */ + __be16 tx_base; /* Tx BD base address */ + u8 rx_func_code; /* Rx function code */ + u8 tx_func_code; /* Tx function code */ + __be16 rx_buff_len; /* Rx buffer length */ + __be16 rx_bd_ptr; /* Rx BD pointer */ + __be16 tx_bd_ptr; /* Tx BD pointer */ + __be32 tx_state; /* Tx internal state */ + __be32 tx_ptr; /* Tx internal data pointer */ + __be16 tx_crc; /* temp transmit CRC */ + __be16 tx_cnt; /* Tx byte count */ + __be32 tx_temp; /* Tx temp */ + __be16 tx_u_ptr; /* Tx microcode return address temp */ + __be16 reserved; +}; + +struct fhci_controller_list { + struct list_head ctrl_list; /* control endpoints */ + struct list_head bulk_list; /* bulk endpoints */ + struct list_head iso_list; /* isochronous endpoints */ + struct list_head intr_list; /* interruput endpoints */ + struct list_head done_list; /* done transfers */ +}; + +struct virtual_root_hub { + int dev_num; /* USB address of the root hub */ + u32 feature; /* indicates what feature has been set */ + struct usb_hub_status hub; + struct usb_port_status port; +}; + +enum fhci_gpios { + GPIO_USBOE = 0, + GPIO_USBTP, + GPIO_USBTN, + GPIO_USBRP, + GPIO_USBRN, + /* these are optional */ + GPIO_SPEED, + GPIO_POWER, + NUM_GPIOS, +}; + +enum fhci_pins { + PIN_USBOE = 0, + PIN_USBTP, + PIN_USBTN, + NUM_PINS, +}; + +struct fhci_hcd { + enum qe_clock fullspeed_clk; + enum qe_clock lowspeed_clk; + struct qe_pin *pins[NUM_PINS]; + int gpios[NUM_GPIOS]; + bool alow_gpios[NUM_GPIOS]; + + struct fhci_regs __iomem *regs; /* I/O memory used to communicate */ + struct fhci_pram __iomem *pram; /* Parameter RAM */ + struct gtm_timer *timer; + + spinlock_t lock; + struct fhci_usb *usb_lld; /* Low-level driver */ + struct virtual_root_hub *vroot_hub; /* the virtual root hub */ + int active_urbs; + struct fhci_controller_list *hc_list; + struct tasklet_struct *process_done_task; /* tasklet for done list */ + + struct list_head empty_eds; + struct list_head empty_tds; + +#ifdef CONFIG_FHCI_DEBUG + int usb_irq_stat[13]; + struct dentry *dfs_root; + struct dentry *dfs_regs; + struct dentry *dfs_irq_stat; +#endif +}; + +#define USB_FRAME_USAGE 90 +#define FRAME_TIME_USAGE (USB_FRAME_USAGE*10) /* frame time usage */ +#define SW_FIX_TIME_BETWEEN_TRANSACTION 150 /* SW */ +#define MAX_BYTES_PER_FRAME (USB_FRAME_USAGE*15) +#define MAX_PERIODIC_FRAME_USAGE 90 + +/* transaction type */ +enum fhci_ta_type { + FHCI_TA_IN = 0, /* input transaction */ + FHCI_TA_OUT, /* output transaction */ + FHCI_TA_SETUP, /* setup transaction */ +}; + +/* transfer mode */ +enum fhci_tf_mode { + FHCI_TF_CTRL = 0, + FHCI_TF_ISO, + FHCI_TF_BULK, + FHCI_TF_INTR, +}; + +enum fhci_speed { + FHCI_FULL_SPEED, + FHCI_LOW_SPEED, +}; + +/* endpoint state */ +enum fhci_ed_state { + FHCI_ED_NEW = 0, /* pipe is new */ + FHCI_ED_OPER, /* pipe is operating */ + FHCI_ED_URB_DEL, /* pipe is in hold because urb is being deleted */ + FHCI_ED_SKIP, /* skip this pipe */ + FHCI_ED_HALTED, /* pipe is halted */ +}; + +enum fhci_port_status { + FHCI_PORT_POWER_OFF = 0, + FHCI_PORT_DISABLED, + FHCI_PORT_DISCONNECTING, + FHCI_PORT_WAITING, /* waiting for connection */ + FHCI_PORT_FULL, /* full speed connected */ + FHCI_PORT_LOW, /* low speed connected */ +}; + +enum fhci_mem_alloc { + MEM_CACHABLE_SYS = 0x00000001, /* primary DDR,cachable */ + MEM_NOCACHE_SYS = 0x00000004, /* primary DDR,non-cachable */ + MEM_SECONDARY = 0x00000002, /* either secondary DDR or SDRAM */ + MEM_PRAM = 0x00000008, /* multi-user RAM identifier */ +}; + +/* USB default parameters*/ +#define DEFAULT_RING_LEN 8 +#define DEFAULT_DATA_MEM MEM_CACHABLE_SYS + +struct ed { + u8 dev_addr; /* device address */ + u8 ep_addr; /* endpoint address */ + enum fhci_tf_mode mode; /* USB transfer mode */ + enum fhci_speed speed; + unsigned int max_pkt_size; + enum fhci_ed_state state; + struct list_head td_list; /* a list of all queued TD to this pipe */ + struct list_head node; + + /* read only parameters, should be cleared upon initialization */ + u8 toggle_carry; /* toggle carry from the last TD submitted */ + u32 last_iso; /* time stamp of last queued ISO transfer */ + struct td *td_head; /* a pointer to the current TD handled */ +}; + +struct td { + void *data; /* a pointer to the data buffer */ + unsigned int len; /* length of the data to be submitted */ + unsigned int actual_len; /* actual bytes transfered on this td */ + enum fhci_ta_type type; /* transaction type */ + u8 toggle; /* toggle for next trans. within this TD */ + u16 iso_index; /* ISO transaction index */ + u16 start_frame; /* start frame time stamp */ + u16 interval; /* interval between trans. (for ISO/Intr) */ + u32 status; /* status of the TD */ + struct ed *ed; /* a handle to the corresponding ED */ + struct urb *urb; /* a handle to the corresponding URB */ + bool ioc; /* Inform On Completion */ + struct list_head node; + + /* read only parameters should be cleared upon initialization */ + struct packet *pkt; + int nak_cnt; + int error_cnt; + struct list_head frame_lh; +}; + +struct packet { + u8 *data; /* packet data */ + u32 len; /* packet length */ + u32 status; /* status of the packet - equivalent to the status + * field for the corresponding structure td */ + u32 info; /* packet information */ + void __iomem *priv_data; /* private data of the driver (TDs or BDs) */ +}; + +/* struct for each URB */ +#define URB_INPROGRESS 0 +#define URB_DEL 1 + +/* URB states (state field) */ +#define US_BULK 0 +#define US_BULK0 1 + +/* three setup states */ +#define US_CTRL_SETUP 2 +#define US_CTRL_DATA 1 +#define US_CTRL_ACK 0 + +#define EP_ZERO 0 + +struct urb_priv { + int num_of_tds; + int tds_cnt; + int state; + + struct td **tds; + struct ed *ed; + struct timer_list time_out; +}; + +struct endpoint { + /* Pointer to ep parameter RAM */ + struct fhci_ep_pram __iomem *ep_pram_ptr; + + /* Host transactions */ + struct usb_td __iomem *td_base; /* first TD in the ring */ + struct usb_td __iomem *conf_td; /* next TD for confirm after transac */ + struct usb_td __iomem *empty_td;/* next TD for new transaction req. */ + struct kfifo *empty_frame_Q; /* Empty frames list to use */ + struct kfifo *conf_frame_Q; /* frames passed to TDs,waiting for tx */ + struct kfifo *dummy_packets_Q;/* dummy packets for the CRC overun */ + + bool already_pushed_dummy_bd; +}; + +/* struct for each 1mSec frame time */ +#define FRAME_IS_TRANSMITTED 0x00 +#define FRAME_TIMER_END_TRANSMISSION 0x01 +#define FRAME_DATA_END_TRANSMISSION 0x02 +#define FRAME_END_TRANSMISSION 0x03 +#define FRAME_IS_PREPARED 0x04 + +struct fhci_time_frame { + u16 frame_num; /* frame number */ + u16 total_bytes; /* total bytes submitted within this frame */ + u8 frame_status; /* flag that indicates to stop fill this frame */ + struct list_head tds_list; /* all tds of this frame */ +}; + +/* internal driver structure*/ +struct fhci_usb { + u16 saved_msk; /* saving of the USB mask register */ + struct endpoint *ep0; /* pointer for endpoint0 structure */ + int intr_nesting_cnt; /* interrupt nesting counter */ + u16 max_frame_usage; /* max frame time usage,in micro-sec */ + u16 max_bytes_per_frame; /* max byte can be tx in one time frame */ + u32 sw_transaction_time; /* sw complete trans time,in micro-sec */ + struct fhci_time_frame *actual_frame; + struct fhci_controller_list *hc_list; /* main structure for hc */ + struct virtual_root_hub *vroot_hub; + enum fhci_port_status port_status; /* v_rh port status */ + + u32 (*transfer_confirm)(struct fhci_hcd *fhci); + + struct fhci_hcd *fhci; +}; + +/* + * Various helpers and prototypes below. + */ + +static inline u16 get_frame_num(struct fhci_hcd *fhci) +{ + return in_be16(&fhci->pram->frame_num) & 0x07ff; +} + +#define fhci_dbg(fhci, fmt, args...) \ + dev_dbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_vdbg(fhci, fmt, args...) \ + dev_vdbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_err(fhci, fmt, args...) \ + dev_err(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_info(fhci, fmt, args...) \ + dev_info(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_warn(fhci, fmt, args...) \ + dev_warn(fhci_to_hcd(fhci)->self.controller, fmt, ##args) + +static inline struct fhci_hcd *hcd_to_fhci(struct usb_hcd *hcd) +{ + return (struct fhci_hcd *)hcd->hcd_priv; +} + +static inline struct usb_hcd *fhci_to_hcd(struct fhci_hcd *fhci) +{ + return container_of((void *)fhci, struct usb_hcd, hcd_priv); +} + +/* fifo of pointers */ +static inline struct kfifo *cq_new(int size) +{ + return kfifo_alloc(size * sizeof(void *), GFP_KERNEL, NULL); +} + +static inline void cq_delete(struct kfifo *kfifo) +{ + kfifo_free(kfifo); +} + +static inline unsigned int cq_howmany(struct kfifo *kfifo) +{ + return __kfifo_len(kfifo) / sizeof(void *); +} + +static inline int cq_put(struct kfifo *kfifo, void *p) +{ + return __kfifo_put(kfifo, (void *)&p, sizeof(p)); +} + +static inline void *cq_get(struct kfifo *kfifo) +{ + void *p = NULL; + + __kfifo_get(kfifo, (void *)&p, sizeof(p)); + return p; +} + +/* fhci-hcd.c */ +void fhci_start_sof_timer(struct fhci_hcd *fhci); +void fhci_stop_sof_timer(struct fhci_hcd *fhci); +u16 fhci_get_sof_timer_count(struct fhci_usb *usb); +void fhci_usb_enable_interrupt(struct fhci_usb *usb); +void fhci_usb_disable_interrupt(struct fhci_usb *usb); +int fhci_ioports_check_bus_state(struct fhci_hcd *fhci); + +/* fhci-mem.c */ +void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td); +void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed); +struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci); +struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb, + struct urb_priv *urb_priv, struct ed *ed, u16 index, + enum fhci_ta_type type, int toggle, u8 *data, u32 len, + u16 interval, u16 start_frame, bool ioc); +void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number); + +/* fhci-hub.c */ +void fhci_config_transceiver(struct fhci_hcd *fhci, + enum fhci_port_status status); +void fhci_port_disable(struct fhci_hcd *fhci); +void fhci_port_enable(void *lld); +void fhci_io_port_generate_reset(struct fhci_hcd *fhci); +void fhci_port_reset(void *lld); +int fhci_hub_status_data(struct usb_hcd *hcd, char *buf); +int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength); + +/* fhci-tds.c */ +void fhci_flush_bds(struct fhci_usb *usb); +void fhci_flush_actual_frame(struct fhci_usb *usb); +u32 fhci_host_transaction(struct fhci_usb *usb, struct packet *pkt, + enum fhci_ta_type trans_type, u8 dest_addr, + u8 dest_ep, enum fhci_tf_mode trans_mode, + enum fhci_speed dest_speed, u8 data_toggle); +void fhci_host_transmit_actual_frame(struct fhci_usb *usb); +void fhci_tx_conf_interrupt(struct fhci_usb *usb); +void fhci_push_dummy_bd(struct endpoint *ep); +u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem, + u32 ring_len); +void fhci_init_ep_registers(struct fhci_usb *usb, + struct endpoint *ep, + enum fhci_mem_alloc data_mem); +void fhci_ep0_free(struct fhci_usb *usb); + +/* fhci-sched.c */ +extern struct tasklet_struct fhci_tasklet; +void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt); +void fhci_flush_all_transmissions(struct fhci_usb *usb); +void fhci_schedule_transactions(struct fhci_usb *usb); +void fhci_device_connected_interrupt(struct fhci_hcd *fhci); +void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci); +void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb); +u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci); +irqreturn_t fhci_irq(struct usb_hcd *hcd); +irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd); + +/* fhci-q.h */ +void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb); +struct td *fhci_remove_td_from_ed(struct ed *ed); +struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame); +void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed); +struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame); +void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td); +struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list); +void fhci_done_td(struct urb *urb, struct td *td); +void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed); + +#ifdef CONFIG_FHCI_DEBUG + +void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er); +void fhci_dfs_destroy(struct fhci_hcd *fhci); +void fhci_dfs_create(struct fhci_hcd *fhci); + +#else + +static inline void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er) {} +static inline void fhci_dfs_destroy(struct fhci_hcd *fhci) {} +static inline void fhci_dfs_create(struct fhci_hcd *fhci) {} + +#endif /* CONFIG_FHCI_DEBUG */ + +#endif /* __FHCI_H */ diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 65a9609f4ad6..5cf5f1eca4f4 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -593,12 +593,10 @@ static int ohci_run (struct ohci_hcd *ohci) * to be checked in case boot firmware (BIOS/SMM/...) has set up * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM). * If the bus glue detected wakeup capability then it should - * already be enabled. Either way, if wakeup should be enabled - * but isn't, we'll enable it now. + * already be enabled; if so we'll just enable it again. */ - if ((ohci->hc_control & OHCI_CTRL_RWC) != 0 - && !device_can_wakeup(hcd->self.controller)) - device_init_wakeup(hcd->self.controller, 1); + if ((ohci->hc_control & OHCI_CTRL_RWC) != 0) + device_set_wakeup_capable(hcd->self.controller, 1); switch (ohci->hc_control & OHCI_CTRL_HCFS) { case OHCI_USB_OPER: diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 8b28ae7865ba..5d625c3fd423 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .suspend_late = usb_hcd_pci_suspend_late, .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 4e221060f58c..944f7e0ca4df 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .suspend_late = usb_hcd_pci_suspend_late, .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif /* PM */ diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c index 577c0d29849d..2291c5f5af51 100644 --- a/drivers/usb/host/whci/asl.c +++ b/drivers/usb/host/whci/asl.c @@ -170,12 +170,17 @@ void asl_stop(struct whc *whc) void asl_update(struct whc *whc, uint32_t wusbcmd) { struct wusbhc *wusbhc = &whc->wusbhc; + long t; mutex_lock(&wusbhc->mutex); if (wusbhc->active) { whc_write_wusbcmd(whc, wusbcmd, wusbcmd); - wait_event(whc->async_list_wq, - (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0); + t = wait_event_timeout( + whc->async_list_wq, + (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0, + msecs_to_jiffies(1000)); + if (t == 0) + whc_hw_error(whc, "ASL update timeout"); } mutex_unlock(&wusbhc->mutex); } diff --git a/drivers/usb/host/whci/hw.c b/drivers/usb/host/whci/hw.c index d498e7203217..6afa2e379160 100644 --- a/drivers/usb/host/whci/hw.c +++ b/drivers/usb/host/whci/hw.c @@ -87,3 +87,18 @@ out: return ret; } + +/** + * whc_hw_error - recover from a hardware error + * @whc: the WHCI HC that broke. + * @reason: a description of the failure. + * + * Recover from broken hardware with a full reset. + */ +void whc_hw_error(struct whc *whc, const char *reason) +{ + struct wusbhc *wusbhc = &whc->wusbhc; + + dev_err(&whc->umc->dev, "hardware error: %s\n", reason); + wusbhc_reset_all(wusbhc); +} diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c index 2ae5abf69a6a..7dc85a0bee7c 100644 --- a/drivers/usb/host/whci/pzl.c +++ b/drivers/usb/host/whci/pzl.c @@ -183,12 +183,17 @@ void pzl_stop(struct whc *whc) void pzl_update(struct whc *whc, uint32_t wusbcmd) { struct wusbhc *wusbhc = &whc->wusbhc; + long t; mutex_lock(&wusbhc->mutex); if (wusbhc->active) { whc_write_wusbcmd(whc, wusbcmd, wusbcmd); - wait_event(whc->periodic_list_wq, - (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0); + t = wait_event_timeout( + whc->periodic_list_wq, + (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0, + msecs_to_jiffies(1000)); + if (t == 0) + whc_hw_error(whc, "PZL update timeout"); } mutex_unlock(&wusbhc->mutex); } diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h index 0f3540f04f53..d3543a181dc9 100644 --- a/drivers/usb/host/whci/whcd.h +++ b/drivers/usb/host/whci/whcd.h @@ -137,6 +137,7 @@ void whc_clean_up(struct whc *whc); /* hw.c */ void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val); int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len); +void whc_hw_error(struct whc *whc, const char *reason); /* wusb.c */ int whc_wusbhc_start(struct wusbhc *wusbhc); diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 189a9db03509..ad4fb15b5dcb 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -57,7 +57,6 @@ #define USB_DEVICE_ID_LD_MACHINETEST 0x2040 /* USB Product ID of Machine Test System */ #define USB_VENDOR_ID_VERNIER 0x08f7 -#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001 #define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002 #define USB_DEVICE_ID_VERNIER_SKIP 0x0003 #define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004 @@ -85,7 +84,6 @@ static struct usb_device_id ld_usb_table [] = { { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST) }, - { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) }, diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index e06810aef2df..4cf27c72423e 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -37,6 +37,7 @@ #define MON_IOCX_GET _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get) #define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch) #define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8) + #ifdef CONFIG_COMPAT #define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32) #define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32) @@ -921,21 +922,6 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file, } break; -#ifdef CONFIG_COMPAT - case MON_IOCX_GET32: { - struct mon_bin_get32 getb; - - if (copy_from_user(&getb, (void __user *)arg, - sizeof(struct mon_bin_get32))) - return -EFAULT; - - ret = mon_bin_get_event(file, rp, - compat_ptr(getb.hdr32), compat_ptr(getb.data32), - getb.alloc32); - } - break; -#endif - case MON_IOCX_MFETCH: { struct mon_bin_mfetch mfetch; @@ -962,7 +948,57 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file, } break; + case MON_IOCG_STATS: { + struct mon_bin_stats __user *sp; + unsigned int nevents; + unsigned int ndropped; + + spin_lock_irqsave(&rp->b_lock, flags); + ndropped = rp->cnt_lost; + rp->cnt_lost = 0; + spin_unlock_irqrestore(&rp->b_lock, flags); + nevents = mon_bin_queued(rp); + + sp = (struct mon_bin_stats __user *)arg; + if (put_user(rp->cnt_lost, &sp->dropped)) + return -EFAULT; + if (put_user(nevents, &sp->queued)) + return -EFAULT; + + } + break; + + default: + return -ENOTTY; + } + + return ret; +} + #ifdef CONFIG_COMPAT +static long mon_bin_compat_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct mon_reader_bin *rp = file->private_data; + int ret; + + switch (cmd) { + + case MON_IOCX_GET32: { + struct mon_bin_get32 getb; + + if (copy_from_user(&getb, (void __user *)arg, + sizeof(struct mon_bin_get32))) + return -EFAULT; + + ret = mon_bin_get_event(file, rp, + compat_ptr(getb.hdr32), compat_ptr(getb.data32), + getb.alloc32); + if (ret < 0) + return ret; + } + return 0; + case MON_IOCX_MFETCH32: { struct mon_bin_mfetch32 mfetch; @@ -986,37 +1022,25 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file, return ret; if (put_user(ret, &uptr->nfetch32)) return -EFAULT; - ret = 0; } - break; -#endif - - case MON_IOCG_STATS: { - struct mon_bin_stats __user *sp; - unsigned int nevents; - unsigned int ndropped; - - spin_lock_irqsave(&rp->b_lock, flags); - ndropped = rp->cnt_lost; - rp->cnt_lost = 0; - spin_unlock_irqrestore(&rp->b_lock, flags); - nevents = mon_bin_queued(rp); + return 0; - sp = (struct mon_bin_stats __user *)arg; - if (put_user(rp->cnt_lost, &sp->dropped)) - return -EFAULT; - if (put_user(nevents, &sp->queued)) - return -EFAULT; + case MON_IOCG_STATS: + return mon_bin_ioctl(NULL, file, cmd, + (unsigned long) compat_ptr(arg)); - } - break; + case MON_IOCQ_URB_LEN: + case MON_IOCQ_RING_SIZE: + case MON_IOCT_RING_SIZE: + case MON_IOCH_MFLUSH: + return mon_bin_ioctl(NULL, file, cmd, arg); default: - return -ENOTTY; + ; } - - return ret; + return -ENOTTY; } +#endif /* CONFIG_COMPAT */ static unsigned int mon_bin_poll(struct file *file, struct poll_table_struct *wait) @@ -1094,6 +1118,9 @@ static const struct file_operations mon_fops_binary = { /* .write = mon_text_write, */ .poll = mon_bin_poll, .ioctl = mon_bin_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = mon_bin_compat_ioctl, +#endif .release = mon_bin_release, .mmap = mon_bin_mmap, }; diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 5af7379cd9a3..9985db08e7db 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -11,6 +11,7 @@ config USB_MUSB_HDRC depends on (USB || USB_GADGET) && HAVE_CLK depends on !SUPERH select TWL4030_USB if MACH_OMAP_3430SDP + select USB_OTG_UTILS tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' help Say Y here if your system has a dual role high speed USB @@ -49,7 +50,7 @@ comment "OMAP 343x high speed USB support" depends on USB_MUSB_HDRC && ARCH_OMAP34XX comment "Blackfin high speed USB Support" - depends on USB_MUSB_HDRC && (BF54x && !BF544) || (BF52x && !BF522 && !BF523) + depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523)) config USB_TUSB6010 boolean "TUSB 6010 support" diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 5ad6d0893cbe..569ef0fed0f6 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -9,6 +9,7 @@ #include <linux/usb.h> #include "musb_core.h" +#include "musb_debug.h" #include "cppi_dma.h" @@ -423,6 +424,7 @@ cppi_rndis_update(struct cppi_channel *c, int is_rx, } } +#ifdef CONFIG_USB_MUSB_DEBUG static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd) { pr_debug("RXBD/%s %08x: " @@ -431,10 +433,11 @@ static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd) bd->hw_next, bd->hw_bufp, bd->hw_off_len, bd->hw_options); } +#endif static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx) { -#if MUSB_DEBUG > 0 +#ifdef CONFIG_USB_MUSB_DEBUG struct cppi_descriptor *bd; if (!_dbg_level(level)) @@ -881,12 +884,14 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket) bd->hw_options |= CPPI_SOP_SET; tail->hw_options |= CPPI_EOP_SET; - if (debug >= 5) { +#ifdef CONFIG_USB_MUSB_DEBUG + if (_dbg_level(5)) { struct cppi_descriptor *d; for (d = rx->head; d; d = d->next) cppi_dump_rxbd("S", d); } +#endif /* in case the preceding transfer left some state... */ tail = rx->last_processed; @@ -990,6 +995,7 @@ static int cppi_channel_program(struct dma_channel *ch, cppi_ch->offset = 0; cppi_ch->maxpacket = maxpacket; cppi_ch->buf_len = len; + cppi_ch->channel.actual_len = 0; /* TX channel? or RX? */ if (cppi_ch->transmit) diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 0d566dc5ce06..5a8fd5d57a11 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -32,9 +32,10 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <mach/arch/hardware.h> -#include <mach/arch/memory.h> -#include <mach/arch/gpio.h> +#include <mach/hardware.h> +#include <mach/memory.h> +#include <mach/gpio.h> + #include <asm/mach-types.h> #include "musb_core.h" @@ -370,12 +371,6 @@ int musb_platform_set_mode(struct musb *musb, u8 mode) return -EIO; } -int musb_platform_set_mode(struct musb *musb, u8 mode) -{ - /* EVM can't do this (right?) */ - return -EIO; -} - int __init musb_platform_init(struct musb *musb) { void __iomem *tibase = musb->ctrl_base; diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 6c7faacfb535..2cc34fa05b73 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1824,8 +1824,9 @@ static void musb_free(struct musb *musb) musb_gadget_cleanup(musb); #endif - if (musb->nIrq >= 0 && musb->irq_wake) { - disable_irq_wake(musb->nIrq); + if (musb->nIrq >= 0) { + if (musb->irq_wake) + disable_irq_wake(musb->nIrq); free_irq(musb->nIrq, musb); } if (is_dma_capable() && musb->dma_controller) { diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 6197daeab8f9..4ea305387981 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -874,10 +874,10 @@ static int musb_gadget_enable(struct usb_ep *ep, status = -EBUSY; goto fail; } - musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + musb_ep->type = usb_endpoint_type(desc); /* check direction and (later) maxpacket size against endpoint */ - if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum) + if (usb_endpoint_num(desc) != epnum) goto fail; /* REVISIT this rules out high bandwidth periodic transfers */ @@ -890,7 +890,7 @@ static int musb_gadget_enable(struct usb_ep *ep, * packet size (or fail), set the mode, clear the fifo */ musb_ep_select(mbase, epnum); - if (desc->bEndpointAddress & USB_DIR_IN) { + if (usb_endpoint_dir_in(desc)) { u16 int_txe = musb_readw(mbase, MUSB_INTRTXE); if (hw_ep->is_shared_fifo) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 99fa61234876..a035ceccf950 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1847,8 +1847,8 @@ static int musb_urb_enqueue( goto done; } - qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; - qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + qh->epnum = usb_endpoint_num(epd); + qh->type = usb_endpoint_type(epd); /* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */ qh->addr_reg = (u8) usb_pipedevice(urb->pipe); diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index 52f7f29cebda..7e073a0d7ac9 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -15,8 +15,8 @@ #include <linux/usb.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <asm/arch/dma.h> -#include <asm/arch/mux.h> +#include <mach/dma.h> +#include <mach/mux.h> #include "musb_core.h" diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 8e8dbdb9b39b..ee55b449ffde 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -6,14 +6,14 @@ comment "OTG and related infrastructure" -if USB || USB_GADGET - config USB_OTG_UTILS bool help Select this to make sure the build includes objects from the OTG infrastructure directory. +if USB || USB_GADGET + # # USB Transceiver Drivers # diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index 537f953bd7f8..6d106e74265e 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -621,9 +621,9 @@ static int __init aircable_init(void) goto failed_usb_register; return 0; -failed_serial_register: - usb_serial_deregister(&aircable_device); failed_usb_register: + usb_serial_deregister(&aircable_device); +failed_serial_register: return retval; } diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index cfaf1f085535..027f4b7dde86 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -85,6 +85,8 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ + { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */ + { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c70a8f667d85..f92f4d773374 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -660,6 +660,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, + { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, + { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -1062,8 +1065,10 @@ static int set_serial_info(struct tty_struct *tty, if (!capable(CAP_SYS_ADMIN)) { if (((new_serial.flags & ~ASYNC_USR_MASK) != - (priv->flags & ~ASYNC_USR_MASK))) + (priv->flags & ~ASYNC_USR_MASK))) { + unlock_kernel(); return -EPERM; + } priv->flags = ((priv->flags & ~ASYNC_USR_MASK) | (new_serial.flags & ASYNC_USR_MASK)); priv->custom_divisor = new_serial.custom_divisor; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 373ee09975bb..e300c840f8ca 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -844,6 +844,9 @@ #define TML_VID 0x1B91 /* Vendor ID */ #define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ +/* NDI Polaris System */ +#define FTDI_NDI_HUC_PID 0xDA70 + /* Propox devices */ #define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 @@ -854,6 +857,10 @@ #define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ #define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ +/* Alti-2 products http://www.alti-2.com */ +#define ALTI2_VID 0x1BC9 +#define ALTI2_N3_PID 0x6001 /* Neptune 3 */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ @@ -881,6 +888,11 @@ #define RATOC_PRODUCT_ID_USB60F 0xb020 /* + * DIEBOLD BCS SE923 + */ +#define DIEBOLD_BCS_SE923_PID 0xfb99 + +/* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ * wValue: 0 diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5ed183477aaf..bfd0b68ceccd 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -158,6 +158,13 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define HUAWEI_PRODUCT_E143E 0x143E #define HUAWEI_PRODUCT_E143F 0x143F +#define QUANTA_VENDOR_ID 0x0408 +#define QUANTA_PRODUCT_Q101 0xEA02 +#define QUANTA_PRODUCT_Q111 0xEA03 +#define QUANTA_PRODUCT_GLX 0xEA04 +#define QUANTA_PRODUCT_GKE 0xEA05 +#define QUANTA_PRODUCT_GLE 0xEA06 + #define NOVATELWIRELESS_VENDOR_ID 0x1410 /* YISO PRODUCTS */ @@ -192,14 +199,15 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define NOVATELWIRELESS_PRODUCT_MC950D 0x4400 /* FUTURE NOVATEL PRODUCTS */ -#define NOVATELWIRELESS_PRODUCT_EVDO_1 0x6000 -#define NOVATELWIRELESS_PRODUCT_HSPA_1 0x7000 -#define NOVATELWIRELESS_PRODUCT_EMBEDDED_1 0x8000 -#define NOVATELWIRELESS_PRODUCT_GLOBAL_1 0x9000 -#define NOVATELWIRELESS_PRODUCT_EVDO_2 0x6001 -#define NOVATELWIRELESS_PRODUCT_HSPA_2 0x7001 -#define NOVATELWIRELESS_PRODUCT_EMBEDDED_2 0x8001 -#define NOVATELWIRELESS_PRODUCT_GLOBAL_2 0x9001 +#define NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED 0X6000 +#define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED 0X6001 +#define NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED 0X7000 +#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED 0X7001 +#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED 0X8000 +#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED 0X8001 +#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0X9000 +#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0X9001 +#define NOVATELWIRELESS_PRODUCT_GLOBAL 0XA001 /* AMOI PRODUCTS */ #define AMOI_VENDOR_ID 0x1614 @@ -209,6 +217,27 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define DELL_VENDOR_ID 0x413C +/* Dell modems */ +#define DELL_PRODUCT_5700_MINICARD 0x8114 +#define DELL_PRODUCT_5500_MINICARD 0x8115 +#define DELL_PRODUCT_5505_MINICARD 0x8116 +#define DELL_PRODUCT_5700_EXPRESSCARD 0x8117 +#define DELL_PRODUCT_5510_EXPRESSCARD 0x8118 + +#define DELL_PRODUCT_5700_MINICARD_SPRINT 0x8128 +#define DELL_PRODUCT_5700_MINICARD_TELUS 0x8129 + +#define DELL_PRODUCT_5720_MINICARD_VZW 0x8133 +#define DELL_PRODUCT_5720_MINICARD_SPRINT 0x8134 +#define DELL_PRODUCT_5720_MINICARD_TELUS 0x8135 +#define DELL_PRODUCT_5520_MINICARD_CINGULAR 0x8136 +#define DELL_PRODUCT_5520_MINICARD_GENERIC_L 0x8137 +#define DELL_PRODUCT_5520_MINICARD_GENERIC_I 0x8138 + +#define DELL_PRODUCT_5730_MINICARD_SPRINT 0x8180 +#define DELL_PRODUCT_5730_MINICARD_TELUS 0x8181 +#define DELL_PRODUCT_5730_MINICARD_VZW 0x8182 + #define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da #define KYOCERA_PRODUCT_KPC680 0x180a @@ -224,7 +253,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define ONDA_VENDOR_ID 0x19d2 #define ONDA_PRODUCT_MSA501HS 0x0001 #define ONDA_PRODUCT_ET502HS 0x0002 -#define ONDA_PRODUCT_MT503HS 0x0200 +#define ONDA_PRODUCT_MT503HS 0x2000 #define BANDRICH_VENDOR_ID 0x1A8D #define BANDRICH_PRODUCT_C100_1 0x1002 @@ -267,12 +296,6 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define ERICSSON_VENDOR_ID 0x0bdb #define ERICSSON_PRODUCT_F3507G 0x1900 -/* Pantech products */ -#define PANTECH_VENDOR_ID 0x106c -#define PANTECH_PRODUCT_PC5740 0x3701 -#define PANTECH_PRODUCT_PC5750 0x3702 /* PX-500 */ -#define PANTECH_PRODUCT_UM150 0x3711 - static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -298,6 +321,11 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q101) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q111) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, @@ -383,31 +411,37 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_1) }, /* Novatel EVDO product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_1) }, /* Novatel HSPA product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_1) }, /* Novatel Embedded product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL_1) }, /* Novatel Global product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_2) }, /* Novatel EVDO product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_2) }, /* Novatel HSPA product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_2) }, /* Novatel Embedded product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL_2) }, /* Novatel Global product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED) }, /* Novatel EVDO product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, /* Novatel HSPA Embedded product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED) }, /* Novatel EVDO product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED) }, /* Novatel HSPA product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED) }, /* Novatel EVDO Embedded product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED) }, /* Novatel HSPA Embedded product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL) }, /* Novatel Global product */ { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) }, - { USB_DEVICE(DELL_VENDOR_ID, 0x8114) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8115) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8116) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8117) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8118) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8128) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8129) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite ET620 CDMA/EV-DO */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8133) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8136) }, /* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8137) }, /* Dell Wireless HSDPA 5520 */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8138) }, /* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8147) }, /* Dell Wireless 5530 Mobile Broadband (3G HSPA) Mini-Card */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5500_MINICARD) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5505_MINICARD) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_EXPRESSCARD) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5510_EXPRESSCARD) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD_SPRINT) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD_TELUS) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite ET620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5720_MINICARD_VZW) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5720_MINICARD_SPRINT) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5720_MINICARD_TELUS) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_CINGULAR) }, /* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_GENERIC_L) }, /* Dell Wireless HSDPA 5520 */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_GENERIC_I) }, /* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8147) }, /* Dell Wireless 5530 Mobile Broadband (3G HSPA) Mini-Card */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, @@ -476,9 +510,6 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) }, - { USB_DEVICE(PANTECH_VENDOR_ID, PANTECH_PRODUCT_PC5740) }, - { USB_DEVICE(PANTECH_VENDOR_ID, PANTECH_PRODUCT_PC5750) }, - { USB_DEVICE(PANTECH_VENDOR_ID, PANTECH_PRODUCT_UM150) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 3cf41df302d7..2620bf6fe5e1 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -176,7 +176,7 @@ static unsigned int product_5052_count; /* the array dimension is the number of default entries plus */ /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */ /* null entry */ -static struct usb_device_id ti_id_table_3410[7+TI_EXTRA_VID_PID_COUNT+1] = { +static struct usb_device_id ti_id_table_3410[10+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) }, @@ -184,16 +184,20 @@ static struct usb_device_id ti_id_table_3410[7+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, }; -static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { +static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, }; -static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = { +static struct usb_device_id ti_id_table_combined[14+2*TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) }, @@ -205,6 +209,9 @@ static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, { } }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index 7e4752fbf232..f323c6025858 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -27,7 +27,11 @@ /* Vendor and product ids */ #define TI_VENDOR_ID 0x0451 +#define IBM_VENDOR_ID 0x04b3 #define TI_3410_PRODUCT_ID 0x3410 +#define IBM_4543_PRODUCT_ID 0x4543 +#define IBM_454B_PRODUCT_ID 0x454b +#define IBM_454C_PRODUCT_ID 0x454c #define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */ #define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */ #define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */ diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 2a42b862aa9f..727c506417cc 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -64,6 +64,7 @@ */ #define VENDOR_ID_NOKIA 0x0421 #define VENDOR_ID_NIKON 0x04b0 +#define VENDOR_ID_PENTAX 0x0a17 #define VENDOR_ID_MOTOROLA 0x22b8 /*********************************************************************** @@ -158,6 +159,7 @@ static int slave_configure(struct scsi_device *sdev) switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) { case VENDOR_ID_NOKIA: case VENDOR_ID_NIKON: + case VENDOR_ID_PENTAX: case VENDOR_ID_MOTOROLA: if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK))) diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 1d5438e6363b..fb65d221cedf 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -558,32 +558,10 @@ static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb) if (srb->result == SAM_STAT_GOOD && scsi_get_resid(srb) == 0) { - /* The command succeeded. If the capacity is odd - * (i.e., if the sector number is even) then the - * "always-even" heuristic would be wrong for this - * device. Issue a WARN() so that the kerneloops.org - * project will be notified and we will then know to - * mark the device with a CAPACITY_OK flag. Hopefully - * this will occur for only a few devices. - * - * Use the sign of us->last_sector_hacks to tell whether - * the warning has already been issued; we don't need - * more than one warning per device. + /* The command succeeded. We know this device doesn't + * have the last-sector bug, so stop checking it. */ - if (!(sector & 1) && us->use_last_sector_hacks > 0) { - unsigned vid = le16_to_cpu( - us->pusb_dev->descriptor.idVendor); - unsigned pid = le16_to_cpu( - us->pusb_dev->descriptor.idProduct); - unsigned rev = le16_to_cpu( - us->pusb_dev->descriptor.bcdDevice); - - WARN(1, "%s: Successful last sector success at %u, " - "device %04x:%04x:%04x\n", - sdkp->disk->disk_name, sector, - vid, pid, rev); - us->use_last_sector_hacks = -1; - } + us->use_last_sector_hacks = 0; } else { /* The command failed. Allow up to 3 retries in case this @@ -599,14 +577,6 @@ static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb) srb->result = SAM_STAT_CHECK_CONDITION; memcpy(srb->sense_buffer, record_not_found, sizeof(record_not_found)); - - /* In theory we might want to issue a WARN() here if the - * capacity is even, since it could indicate the device - * has the READ CAPACITY bug _and_ the real capacity is - * odd. But it could also indicate that the device - * simply can't access its last sector, a failure mode - * which is surprisingly common. So no warning. - */ } done: diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index a7f9513fa19d..50dc33a6065b 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -995,6 +995,16 @@ UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), +/* Reported by Jean-Baptiste Onofre <jb@nanthrax.net> + * Support the following product : + * "Dane-Elec MediaTouch" + */ +UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000, + "RockChip", + "MTP", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), + /* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com> * This USB MP3/AVI player device fails and disconnects if more than 128 * sectors (64kB) are read/written in a single command, and may be present @@ -1204,7 +1214,7 @@ UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff, "Datafab", "KECF-USB", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_FIX_INQUIRY ), + US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ), /* Reported by Rauch Wolke <rauchwolke@gmx.net> */ UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff, @@ -1251,6 +1261,13 @@ UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */ +UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001, + "Argosy", + "Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. * Flag will support Bulk devices which use a standards-violating 32-byte * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with @@ -1337,21 +1354,6 @@ UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), - -/* Submitted by Per Winkvist <per.winkvist@uk.com> */ -UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff, - "Pentax", - "Optio S/S4", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_FIX_INQUIRY ), - -/* Reported by Jaak Ristioja <Ristioja@gmail.com> */ -UNUSUAL_DEV( 0x0a17, 0x006e, 0x0100, 0x0100, - "Pentax", - "K10D", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_FIX_CAPACITY ), - /* These are virtual windows driver CDs, which the zd1211rw driver * automatically converts into WLAN devices. */ UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101, @@ -1589,6 +1591,13 @@ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NO_WP_DETECT ), +/* Reported by The Solutor <thesolutor@gmail.com> */ +UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000, + "Sony Ericsson", + "MD400", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_DEVICE), + /* Reported by Jan Mate <mate@fiit.stuba.sk> * and by Soeren Sonnenburg <kernel@nn7.de> */ UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000, @@ -2031,15 +2040,11 @@ UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), -/* Reported by Mauro Andreolini <andreoli@weblab.ing.unimo.it> - * This entry is needed to bypass the ZeroCD mechanism - * and to properly load as a modem device. - */ -UNUSUAL_DEV( 0x19d2, 0x2000, 0x0000, 0x0000, - "Onda ET502HS", - "USB MMC Storage", +UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001, + "ST", + "2A", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_IGNORE_DEVICE), + US_FL_FIX_CAPACITY), /* patch submitted by Davide Perini <perini.davide@dpsoftware.org> * and Renato Perini <rperini@email.it> diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index e2e7e4bc8463..8e18141bb2e0 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -386,6 +386,7 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc, | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED); port->change |= USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE; if (wusb_dev) { + dev_dbg(wusbhc->dev, "disconnecting device from port %d\n", wusb_dev->port_idx); if (!list_empty(&wusb_dev->cack_node)) list_del_init(&wusb_dev->cack_node); /* For the one in cack_add() */ diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c index 3937bf6f8cef..9fe4246cecb9 100644 --- a/drivers/usb/wusbcore/rh.c +++ b/drivers/usb/wusbcore/rh.c @@ -100,6 +100,9 @@ static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx) struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx); struct wusb_dev *wusb_dev = port->wusb_dev; + if (wusb_dev == NULL) + return -ENOTCONN; + port->status |= USB_PORT_STAT_RESET; port->change |= USB_PORT_STAT_C_RESET; diff --git a/drivers/uwb/allocator.c b/drivers/uwb/allocator.c index c8185e6b0cd5..c13cec7dcbc5 100644 --- a/drivers/uwb/allocator.c +++ b/drivers/uwb/allocator.c @@ -15,7 +15,6 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <linux/version.h> #include <linux/kernel.h> #include <linux/uwb.h> diff --git a/drivers/uwb/drp.c b/drivers/uwb/drp.c index 2b4f9406789d..4f5ca99a04b9 100644 --- a/drivers/uwb/drp.c +++ b/drivers/uwb/drp.c @@ -66,14 +66,14 @@ static void uwb_rc_set_drp_cmd_done(struct uwb_rc *rc, void *arg, } else dev_err(&rc->uwb_dev.dev, "SET-DRP-IE: timeout\n"); - spin_lock(&rc->rsvs_lock); + spin_lock_bh(&rc->rsvs_lock); if (rc->set_drp_ie_pending > 1) { rc->set_drp_ie_pending = 0; uwb_rsv_queue_update(rc); } else { rc->set_drp_ie_pending = 0; } - spin_unlock(&rc->rsvs_lock); + spin_unlock_bh(&rc->rsvs_lock); } /** diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c index ec6eecb32f30..6b76f4bb4cc7 100644 --- a/drivers/uwb/rsv.c +++ b/drivers/uwb/rsv.c @@ -114,7 +114,8 @@ void uwb_rsv_dump(char *text, struct uwb_rsv *rsv) devaddr = rsv->target.devaddr; uwb_dev_addr_print(target, sizeof(target), &devaddr); - dev_dbg(dev, "rsv %s -> %s: %s\n", owner, target, uwb_rsv_state_str(rsv->state)); + dev_dbg(dev, "rsv %s %s -> %s: %s\n", + text, owner, target, uwb_rsv_state_str(rsv->state)); } static void uwb_rsv_release(struct kref *kref) @@ -511,8 +512,7 @@ void uwb_rsv_remove(struct uwb_rsv *rsv) if (uwb_rsv_is_owner(rsv)) uwb_rsv_put_stream(rsv); - - del_timer_sync(&rsv->timer); + uwb_dev_put(rsv->owner); if (rsv->target.type == UWB_RSV_TARGET_DEV) uwb_dev_put(rsv->target.dev); @@ -870,7 +870,7 @@ void uwb_rsv_queue_update(struct uwb_rc *rc) */ void uwb_rsv_sched_update(struct uwb_rc *rc) { - spin_lock(&rc->rsvs_lock); + spin_lock_bh(&rc->rsvs_lock); if (!delayed_work_pending(&rc->rsv_update_work)) { if (rc->set_drp_ie_pending > 0) { rc->set_drp_ie_pending++; @@ -879,7 +879,7 @@ void uwb_rsv_sched_update(struct uwb_rc *rc) uwb_rsv_queue_update(rc); } unlock: - spin_unlock(&rc->rsvs_lock); + spin_unlock_bh(&rc->rsvs_lock); } /* @@ -943,13 +943,22 @@ void uwb_rsv_remove_all(struct uwb_rc *rc) mutex_lock(&rc->rsvs_mutex); list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) { - uwb_rsv_remove(rsv); + if (rsv->state != UWB_RSV_STATE_NONE) + uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); + del_timer_sync(&rsv->timer); } /* Cancel any postponed update. */ rc->set_drp_ie_pending = 0; mutex_unlock(&rc->rsvs_mutex); cancel_delayed_work_sync(&rc->rsv_update_work); + flush_workqueue(rc->rsv_workq); + + mutex_lock(&rc->rsvs_mutex); + list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) { + uwb_rsv_remove(rsv); + } + mutex_unlock(&rc->rsvs_mutex); } void uwb_rsv_init(struct uwb_rc *rc) diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index c94f71980c1b..bf0af660df8a 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -41,7 +41,7 @@ menuconfig FB You need an utility program called fbset to make full use of frame buffer devices. Please read <file:Documentation/fb/framebuffer.txt> and the Framebuffer-HOWTO at - <http://www.tahallah.demon.co.uk/programming/prog.html> for more + <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more information. Say Y here and to the driver for your graphics board below if you @@ -1054,9 +1054,10 @@ config FB_RIVA_BACKLIGHT config FB_I810 tristate "Intel 810/815 support (EXPERIMENTAL)" - depends on FB && EXPERIMENTAL && PCI && X86_32 + depends on EXPERIMENTAL && PCI && X86_32 select AGP select AGP_INTEL + select FB select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -1119,7 +1120,8 @@ config FB_CARILLO_RANCH config FB_INTEL tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)" - depends on FB && EXPERIMENTAL && PCI && X86 + depends on EXPERIMENTAL && PCI && X86 + select FB select AGP select AGP_INTEL select FB_MODE_HELPERS diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c index db16112cf197..e6e299feb51b 100644 --- a/drivers/video/aty/aty128fb.c +++ b/drivers/video/aty/aty128fb.c @@ -1475,7 +1475,7 @@ static int aty128fb_set_par(struct fb_info *info) aty128_set_pll(&par->pll, par); aty128_set_fifo(&par->fifo_reg, par); - config = aty_ld_le32(CONFIG_CNTL) & ~3; + config = aty_ld_le32(CNFG_CNTL) & ~3; #if defined(__BIG_ENDIAN) if (par->crtc.bpp == 32) @@ -1484,7 +1484,7 @@ static int aty128fb_set_par(struct fb_info *info) config |= 1; /* make aperture do 16 bit swapping */ #endif - aty_st_le32(CONFIG_CNTL, config); + aty_st_le32(CNFG_CNTL, config); aty_st_8(CRTC_EXT_CNTL + 1, 0); /* turn the video back on */ info->fix.line_length = (par->crtc.vxres * par->crtc.bpp) >> 3; @@ -1875,7 +1875,7 @@ static int __devinit aty128_init(struct pci_dev *pdev, const struct pci_device_i u32 dac; /* Get the chip revision */ - chip_rev = (aty_ld_le32(CONFIG_CNTL) >> 16) & 0x1F; + chip_rev = (aty_ld_le32(CNFG_CNTL) >> 16) & 0x1F; strcpy(video_card, "Rage128 XX "); video_card[8] = ent->device >> 8; @@ -2057,7 +2057,7 @@ static int __devinit aty128_probe(struct pci_dev *pdev, const struct pci_device_ /* Grab memory size from the card */ // How does this relate to the resource length from the PCI hardware? - par->vram_size = aty_ld_le32(CONFIG_MEMSIZE) & 0x03FFFFFF; + par->vram_size = aty_ld_le32(CNFG_MEMSIZE) & 0x03FFFFFF; /* Virtualize the framebuffer */ info->screen_base = ioremap(fb_addr, par->vram_size); @@ -2374,6 +2374,8 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend) /* Set the chip into the appropriate suspend mode (we use D2, * D3 would require a complete re-initialisation of the chip, * including PCI config registers, clocks, AGP configuration, ...) + * + * For resume, the core will have already brought us back to D0 */ if (suspend) { /* Make sure CRTC2 is reset. Remove that the day we decide to @@ -2391,17 +2393,9 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend) aty_st_le32(BUS_CNTL1, 0x00000010); aty_st_le32(MEM_POWER_MISC, 0x0c830000); mdelay(100); - pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command); + /* Switch PCI power management to D2 */ - pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, - (pwr_command & ~PCI_PM_CTRL_STATE_MASK) | 2); - pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command); - } else { - /* Switch back PCI power management to D0 */ - mdelay(100); - pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, 0); - pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command); - mdelay(100); + pci_set_power_state(pdev, PCI_D2); } } @@ -2410,6 +2404,12 @@ static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state) struct fb_info *info = pci_get_drvdata(pdev); struct aty128fb_par *par = info->par; + /* Because we may change PCI D state ourselves, we need to + * first save the config space content so the core can + * restore it properly on resume. + */ + pci_save_state(pdev); + /* We don't do anything but D2, for now we return 0, but * we may want to change that. How do we know if the BIOS * can properly take care of D3 ? Also, with swsusp, we @@ -2476,6 +2476,11 @@ static int aty128_do_resume(struct pci_dev *pdev) if (pdev->dev.power.power_state.event == PM_EVENT_ON) return 0; + /* PCI state will have been restored by the core, so + * we should be in D0 now with our config space fully + * restored + */ + /* Wakeup chip */ aty128_set_suspend(par, 0); par->asleep = 0; diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index cc6b470073da..1207c208a30b 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -135,7 +135,7 @@ #if defined(CONFIG_PM) || defined(CONFIG_PMAC_BACKLIGHT) || \ defined (CONFIG_FB_ATY_GENERIC_LCD) || defined(CONFIG_FB_ATY_BACKLIGHT) static const u32 lt_lcd_regs[] = { - CONFIG_PANEL_LG, + CNFG_PANEL_LG, LCD_GEN_CNTL_LG, DSTN_CONTROL_LG, HFB_PITCH_ADDR_LG, @@ -446,7 +446,7 @@ static int __devinit correct_chipset(struct atyfb_par *par) par->pll_limits.ecp_max = aty_chips[i].ecp_max; par->features = aty_chips[i].features; - chip_id = aty_ld_le32(CONFIG_CHIP_ID, par); + chip_id = aty_ld_le32(CNFG_CHIP_ID, par); type = chip_id & CFG_CHIP_TYPE; rev = (chip_id & CFG_CHIP_REV) >> 24; @@ -629,7 +629,7 @@ static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc) crtc->lcd_index = aty_ld_le32(LCD_INDEX, par); aty_st_le32(LCD_INDEX, crtc->lcd_index, par); } - crtc->lcd_config_panel = aty_ld_lcd(CONFIG_PANEL, par); + crtc->lcd_config_panel = aty_ld_lcd(CNFG_PANEL, par); crtc->lcd_gen_cntl = aty_ld_lcd(LCD_GEN_CNTL, par); @@ -676,7 +676,7 @@ static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc) aty_st_le32(CRTC_GEN_CNTL, crtc->gen_cntl & ~(CRTC_EXT_DISP_EN | CRTC_EN), par); /* update non-shadow registers first */ - aty_st_lcd(CONFIG_PANEL, crtc->lcd_config_panel, par); + aty_st_lcd(CNFG_PANEL, crtc->lcd_config_panel, par); aty_st_lcd(LCD_GEN_CNTL, crtc->lcd_gen_cntl & ~(CRTC_RW_SELECT | SHADOW_EN | SHADOW_RW_EN), par); @@ -858,7 +858,7 @@ static int aty_var_to_crtc(const struct fb_info *info, if (!M64_HAS(MOBIL_BUS)) crtc->lcd_index |= CRTC2_DISPLAY_DIS; - crtc->lcd_config_panel = aty_ld_lcd(CONFIG_PANEL, par) | 0x4000; + crtc->lcd_config_panel = aty_ld_lcd(CNFG_PANEL, par) | 0x4000; crtc->lcd_gen_cntl = aty_ld_lcd(LCD_GEN_CNTL, par) & ~CRTC_RW_SELECT; crtc->lcd_gen_cntl &= @@ -1978,7 +1978,7 @@ static int aty_power_mgmt(int sleep, struct atyfb_par *par) return timeout ? 0 : -EIO; } -#endif +#endif /* CONFIG_PPC_PMAC */ static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state) { @@ -2002,9 +2002,15 @@ static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state) par->asleep = 1; par->lock_blank = 1; + /* Because we may change PCI D state ourselves, we need to + * first save the config space content so the core can + * restore it properly on resume. + */ + pci_save_state(pdev); + #ifdef CONFIG_PPC_PMAC /* Set chip to "suspend" mode */ - if (aty_power_mgmt(1, par)) { + if (machine_is(powermac) && aty_power_mgmt(1, par)) { par->asleep = 0; par->lock_blank = 0; atyfb_blank(FB_BLANK_UNBLANK, info); @@ -2047,11 +2053,15 @@ static int atyfb_pci_resume(struct pci_dev *pdev) acquire_console_sem(); + /* PCI state will have been restored by the core, so + * we should be in D0 now with our config space fully + * restored + */ + #ifdef CONFIG_PPC_PMAC - if (pdev->dev.power.power_state.event == 2) + if (machine_is(powermac) && + pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) aty_power_mgmt(0, par); -#else - pci_set_power_state(pdev, PCI_D0); #endif aty_resume_chip(info); @@ -2254,7 +2264,7 @@ static int __devinit aty_init(struct fb_info *info) if (!M64_HAS(INTEGRATED)) { u32 stat0; u8 dac_type, dac_subtype, clk_type; - stat0 = aty_ld_le32(CONFIG_STAT0, par); + stat0 = aty_ld_le32(CNFG_STAT0, par); par->bus_type = (stat0 >> 0) & 0x07; par->ram_type = (stat0 >> 3) & 0x07; ramname = aty_gx_ram[par->ram_type]; @@ -2324,7 +2334,7 @@ static int __devinit aty_init(struct fb_info *info) par->dac_ops = &aty_dac_ct; par->pll_ops = &aty_pll_ct; par->bus_type = PCI; - par->ram_type = (aty_ld_le32(CONFIG_STAT0, par) & 0x07); + par->ram_type = (aty_ld_le32(CNFG_STAT0, par) & 0x07); ramname = aty_ct_ram[par->ram_type]; /* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */ if (par->pll_limits.mclk == 67 && par->ram_type < SDRAM) @@ -2433,7 +2443,7 @@ static int __devinit aty_init(struct fb_info *info) } if (M64_HAS(MAGIC_VRAM_SIZE)) { - if (aty_ld_le32(CONFIG_STAT1, par) & 0x40000000) + if (aty_ld_le32(CNFG_STAT1, par) & 0x40000000) info->fix.smem_len += 0x400000; } @@ -2946,7 +2956,7 @@ static int __devinit atyfb_setup_sparc(struct pci_dev *pdev, * Fix PROMs idea of MEM_CNTL settings... */ mem = aty_ld_le32(MEM_CNTL, par); - chip_id = aty_ld_le32(CONFIG_CHIP_ID, par); + chip_id = aty_ld_le32(CNFG_CHIP_ID, par); if (((chip_id & CFG_CHIP_TYPE) == VT_CHIP_ID) && !((chip_id >> 24) & 1)) { switch (mem & 0x0f) { case 3: @@ -2964,7 +2974,7 @@ static int __devinit atyfb_setup_sparc(struct pci_dev *pdev, default: break; } - if ((aty_ld_le32(CONFIG_STAT0, par) & 7) >= SDRAM) + if ((aty_ld_le32(CNFG_STAT0, par) & 7) >= SDRAM) mem &= ~(0x00700000); } mem &= ~(0xcf80e000); /* Turn off all undocumented bits. */ @@ -3572,7 +3582,7 @@ static int __init atyfb_atari_probe(void) } /* Fake pci_id for correct_chipset() */ - switch (aty_ld_le32(CONFIG_CHIP_ID, par) & CFG_CHIP_TYPE) { + switch (aty_ld_le32(CNFG_CHIP_ID, par) & CFG_CHIP_TYPE) { case 0x00d7: par->pci_id = PCI_CHIP_MACH64GX; break; diff --git a/drivers/video/aty/mach64_ct.c b/drivers/video/aty/mach64_ct.c index c50c7cf26fe9..2745b8539485 100644 --- a/drivers/video/aty/mach64_ct.c +++ b/drivers/video/aty/mach64_ct.c @@ -8,6 +8,9 @@ #include <asm/io.h> #include <video/mach64.h> #include "atyfb.h" +#ifdef CONFIG_PPC +#include <asm/machdep.h> +#endif #undef DEBUG @@ -536,6 +539,14 @@ static int __devinit aty_init_pll_ct(const struct fb_info *info, pll->ct.xclk_post_div_real = postdividers[xpost_div]; pll->ct.mclk_fb_div = q * pll->ct.xclk_post_div_real / 8; +#ifdef CONFIG_PPC + if (machine_is(powermac)) { + /* Override PLL_EXT_CNTL & 0x07. */ + pll->ct.xclk_post_div = xpost_div; + pll->ct.xclk_ref_div = 1; + } +#endif + #ifdef DEBUG pllmclk = (1000000 * pll->ct.mclk_fb_mult * pll->ct.mclk_fb_div) / (par->ref_clk_per * pll->ct.pll_ref_div); diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index d0f1a7fc2c9d..16bb7e3c0310 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -1936,8 +1936,8 @@ static void fixup_memory_mappings(struct radeonfb_info *rinfo) OUTREG(CRTC_GEN_CNTL, save_crtc_gen_cntl | CRTC_DISP_REQ_EN_B); mdelay(100); - aper_base = INREG(CONFIG_APER_0_BASE); - aper_size = INREG(CONFIG_APER_SIZE); + aper_base = INREG(CNFG_APER_0_BASE); + aper_size = INREG(CNFG_APER_SIZE); #ifdef SET_MC_FB_FROM_APERTURE /* Set framebuffer to be at the same address as set in PCI BAR */ @@ -2024,11 +2024,11 @@ static void radeon_identify_vram(struct radeonfb_info *rinfo) ~CRTC_H_CUTOFF_ACTIVE_EN); } } else { - tmp = INREG(CONFIG_MEMSIZE); + tmp = INREG(CNFG_MEMSIZE); } /* mem size is bits [28:0], mask off the rest */ - rinfo->video_ram = tmp & CONFIG_MEMSIZE_MASK; + rinfo->video_ram = tmp & CNFG_MEMSIZE_MASK; /* * Hack to get around some busted production M6's @@ -2228,7 +2228,7 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev, */ rinfo->errata = 0; if (rinfo->family == CHIP_FAMILY_R300 && - (INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) + (INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) == CFG_ATI_REV_A11) rinfo->errata |= CHIP_ERRATA_R300_CG; diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index 675abdafc2d8..ca5f0dc28546 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -333,7 +333,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo) if (!rinfo->has_CRTC2) { tmp = INPLL(pllSCLK_CNTL); - if ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) > CFG_ATI_REV_A13) + if ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) > CFG_ATI_REV_A13) tmp &= ~(SCLK_CNTL__FORCE_CP | SCLK_CNTL__FORCE_RB); tmp &= ~(SCLK_CNTL__FORCE_HDP | SCLK_CNTL__FORCE_DISP1 | SCLK_CNTL__FORCE_TOP | SCLK_CNTL__FORCE_SE | @@ -468,9 +468,9 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo) /*RAGE_6::A11 A12 A12N1 A13, RV250::A11 A12, R300*/ if ((rinfo->family == CHIP_FAMILY_RV250 && - ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) || + ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) || ((rinfo->family == CHIP_FAMILY_RV100) && - ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) <= CFG_ATI_REV_A13))) { + ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) <= CFG_ATI_REV_A13))) { tmp |= SCLK_CNTL__FORCE_CP; tmp |= SCLK_CNTL__FORCE_VIP; } @@ -486,7 +486,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo) /* RV200::A11 A12 RV250::A11 A12 */ if (((rinfo->family == CHIP_FAMILY_RV200) || (rinfo->family == CHIP_FAMILY_RV250)) && - ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) + ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) tmp |= SCLK_MORE_CNTL__FORCEON; OUTPLL(pllSCLK_MORE_CNTL, tmp); @@ -497,7 +497,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo) /* RV200::A11 A12, RV250::A11 A12 */ if (((rinfo->family == CHIP_FAMILY_RV200) || (rinfo->family == CHIP_FAMILY_RV250)) && - ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) { + ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) { tmp = INPLL(pllPLL_PWRMGT_CNTL); tmp |= PLL_PWRMGT_CNTL__TCL_BYPASS_DISABLE; OUTPLL(pllPLL_PWRMGT_CNTL, tmp); @@ -702,7 +702,7 @@ static void radeon_pm_restore_regs(struct radeonfb_info *rinfo) OUTREG(DISPLAY_BASE_ADDR, rinfo->save_regs[31]); OUTREG(MC_AGP_LOCATION, rinfo->save_regs[32]); OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]); - OUTREG(CONFIG_MEMSIZE, rinfo->video_ram); + OUTREG(CNFG_MEMSIZE, rinfo->video_ram); OUTREG(DISP_MISC_CNTL, rinfo->save_regs[9]); OUTREG(DISP_PWR_MAN, rinfo->save_regs[10]); @@ -1723,7 +1723,7 @@ static void radeon_reinitialize_M10(struct radeonfb_info *rinfo) OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]); OUTREG(MC_FB_LOCATION, rinfo->save_regs[30]); OUTREG(OV0_BASE_ADDR, rinfo->save_regs[80]); - OUTREG(CONFIG_MEMSIZE, rinfo->video_ram); + OUTREG(CNFG_MEMSIZE, rinfo->video_ram); OUTREG(BUS_CNTL, rinfo->save_regs[36]); OUTREG(BUS_CNTL1, rinfo->save_regs[14]); OUTREG(MPP_TB_CONFIG, rinfo->save_regs[37]); @@ -1961,7 +1961,7 @@ static void radeon_pm_m9p_reconfigure_mc(struct radeonfb_info *rinfo) OUTMC(rinfo, ixMC_CHP_IO_CNTL_B1, rinfo->save_regs[68] /*0x141555ff*/); OUTMC(rinfo, ixMC_IMP_CNTL_0, rinfo->save_regs[71] /*0x00009249*/); OUTREG(MC_IND_INDEX, 0); - OUTREG(CONFIG_MEMSIZE, rinfo->video_ram); + OUTREG(CNFG_MEMSIZE, rinfo->video_ram); mdelay(20); } @@ -2361,7 +2361,7 @@ static void radeon_reinitialize_QW(struct radeonfb_info *rinfo) OUTMC(rinfo, ixMC_IMP_CNTL_0, 0x00009249); OUTREG(MC_IND_INDEX, 0); - OUTREG(CONFIG_MEMSIZE, rinfo->video_ram); + OUTREG(CNFG_MEMSIZE, rinfo->video_ram); radeon_pm_full_reset_sdram(rinfo); @@ -2509,9 +2509,7 @@ static void radeon_reinitialize_QW(struct radeonfb_info *rinfo) static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend) { - u16 pwr_cmd; u32 tmp; - int i; if (!rinfo->pm_reg) return; @@ -2557,32 +2555,14 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend) } } - for (i = 0; i < 64; ++i) - pci_read_config_dword(rinfo->pdev, i * 4, - &rinfo->cfg_save[i]); - /* Switch PCI power management to D2. */ pci_disable_device(rinfo->pdev); - for (;;) { - pci_read_config_word( - rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, - &pwr_cmd); - if (pwr_cmd & 2) - break; - pci_write_config_word( - rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, - (pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2); - mdelay(500); - } + pci_save_state(rinfo->pdev); + pci_set_power_state(rinfo->pdev, PCI_D2); } else { printk(KERN_DEBUG "radeonfb (%s): switching to D0 state...\n", pci_name(rinfo->pdev)); - /* Switch back PCI powermanagment to D0 */ - mdelay(200); - pci_write_config_word(rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, 0); - mdelay(500); - if (rinfo->family <= CHIP_FAMILY_RV250) { /* Reset the SDRAM controller */ radeon_pm_full_reset_sdram(rinfo); @@ -2598,37 +2578,10 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend) } } -static int radeon_restore_pci_cfg(struct radeonfb_info *rinfo) -{ - int i; - static u32 radeon_cfg_after_resume[64]; - - for (i = 0; i < 64; ++i) - pci_read_config_dword(rinfo->pdev, i * 4, - &radeon_cfg_after_resume[i]); - - if (radeon_cfg_after_resume[PCI_BASE_ADDRESS_0/4] - == rinfo->cfg_save[PCI_BASE_ADDRESS_0/4]) - return 0; /* assume everything is ok */ - - for (i = PCI_BASE_ADDRESS_0/4; i < 64; ++i) { - if (radeon_cfg_after_resume[i] != rinfo->cfg_save[i]) - pci_write_config_dword(rinfo->pdev, i * 4, - rinfo->cfg_save[i]); - } - pci_write_config_word(rinfo->pdev, PCI_CACHE_LINE_SIZE, - rinfo->cfg_save[PCI_CACHE_LINE_SIZE/4]); - pci_write_config_word(rinfo->pdev, PCI_COMMAND, - rinfo->cfg_save[PCI_COMMAND/4]); - return 1; -} - - int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) { struct fb_info *info = pci_get_drvdata(pdev); struct radeonfb_info *rinfo = info->par; - int i; if (mesg.event == pdev->dev.power.power_state.event) return 0; @@ -2674,6 +2627,11 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) pmac_suspend_agp_for_card(pdev); #endif /* CONFIG_PPC_PMAC */ + /* It's unclear whether or when the generic code will do that, so let's + * do it ourselves. We save state before we do any power management + */ + pci_save_state(pdev); + /* If we support wakeup from poweroff, we save all regs we can including cfg * space */ @@ -2698,9 +2656,6 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) mdelay(20); OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_DIGON)); } - // FIXME: Use PCI layer - for (i = 0; i < 64; ++i) - pci_read_config_dword(pdev, i * 4, &rinfo->cfg_save[i]); pci_disable_device(pdev); } /* If we support D2, we go to it (should be fixed later with a flag forcing @@ -2717,6 +2672,13 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) return 0; } +static int radeon_check_power_loss(struct radeonfb_info *rinfo) +{ + return rinfo->save_regs[4] != INPLL(CLK_PIN_CNTL) || + rinfo->save_regs[2] != INPLL(MCLK_CNTL) || + rinfo->save_regs[3] != INPLL(SCLK_CNTL); +} + int radeonfb_pci_resume(struct pci_dev *pdev) { struct fb_info *info = pci_get_drvdata(pdev); @@ -2735,20 +2697,13 @@ int radeonfb_pci_resume(struct pci_dev *pdev) printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n", pci_name(pdev), pdev->dev.power.power_state.event); - - if (pci_enable_device(pdev)) { - rc = -ENODEV; - printk(KERN_ERR "radeonfb (%s): can't enable PCI device !\n", - pci_name(pdev)); - goto bail; - } - pci_set_master(pdev); - + /* PCI state will have been restored by the core, so + * we should be in D0 now with our config space fully + * restored + */ if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { - /* Wakeup chip. Check from config space if we were powered off - * (todo: additionally, check CLK_PIN_CNTL too) - */ - if ((rinfo->pm_mode & radeon_pm_off) && radeon_restore_pci_cfg(rinfo)) { + /* Wakeup chip */ + if ((rinfo->pm_mode & radeon_pm_off) && radeon_check_power_loss(rinfo)) { if (rinfo->reinit_func != NULL) rinfo->reinit_func(rinfo); else { diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h index 3ea1b00fdd22..7351e66c7f54 100644 --- a/drivers/video/aty/radeonfb.h +++ b/drivers/video/aty/radeonfb.h @@ -361,8 +361,6 @@ struct radeonfb_info { #ifdef CONFIG_FB_RADEON_I2C struct radeon_i2c_chan i2c[4]; #endif - - u32 cfg_save[64]; }; diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 363b3cb2f01b..63d759498165 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -18,7 +18,7 @@ obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o -obj-$(CONFIG_BACKLIGHT_DA903X) += da903x.o +obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o diff --git a/drivers/video/backlight/da903x.c b/drivers/video/backlight/da903x_bl.c index 93bb4340cc64..93bb4340cc64 100644 --- a/drivers/video/backlight/da903x.c +++ b/drivers/video/backlight/da903x_bl.c diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c index 2a423d3a2a8e..90cfddabf1f7 100644 --- a/drivers/video/bfin-t350mcqb-fb.c +++ b/drivers/video/bfin-t350mcqb-fb.c @@ -447,7 +447,7 @@ static irqreturn_t bfin_t350mcqb_irq_error(int irq, void *dev_id) return IRQ_HANDLED; } -static int __init bfin_t350mcqb_probe(struct platform_device *pdev) +static int __devinit bfin_t350mcqb_probe(struct platform_device *pdev) { struct bfin_t350mcqbfb_info *info; struct fb_info *fbinfo; diff --git a/drivers/video/fbcmap.c b/drivers/video/fbcmap.c index 91b78e691505..f53b9f1d6aba 100644 --- a/drivers/video/fbcmap.c +++ b/drivers/video/fbcmap.c @@ -250,10 +250,6 @@ int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *info) int rc, size = cmap->len * sizeof(u16); struct fb_cmap umap; - if (cmap->start < 0 || (!info->fbops->fb_setcolreg && - !info->fbops->fb_setcmap)) - return -EINVAL; - memset(&umap, 0, sizeof(struct fb_cmap)); rc = fb_alloc_cmap(&umap, cmap->len, cmap->transp != NULL); if (rc) @@ -262,11 +258,23 @@ int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *info) copy_from_user(umap.green, cmap->green, size) || copy_from_user(umap.blue, cmap->blue, size) || (cmap->transp && copy_from_user(umap.transp, cmap->transp, size))) { - fb_dealloc_cmap(&umap); - return -EFAULT; + rc = -EFAULT; + goto out; } umap.start = cmap->start; + if (!lock_fb_info(info)) { + rc = -ENODEV; + goto out; + } + if (cmap->start < 0 || (!info->fbops->fb_setcolreg && + !info->fbops->fb_setcmap)) { + rc = -EINVAL; + goto out1; + } rc = fb_set_cmap(&umap, info); +out1: + unlock_fb_info(info); +out: fb_dealloc_cmap(&umap); return rc; } diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index 756efeb91abc..cfd9dce1ce0b 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1013,132 +1013,139 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd, struct fb_var_screeninfo var; struct fb_fix_screeninfo fix; struct fb_con2fbmap con2fb; + struct fb_cmap cmap_from; struct fb_cmap_user cmap; struct fb_event event; void __user *argp = (void __user *)arg; long ret = 0; - fb = info->fbops; - if (!fb) - return -ENODEV; - switch (cmd) { case FBIOGET_VSCREENINFO: - ret = copy_to_user(argp, &info->var, - sizeof(var)) ? -EFAULT : 0; + if (!lock_fb_info(info)) + return -ENODEV; + var = info->var; + unlock_fb_info(info); + + ret = copy_to_user(argp, &var, sizeof(var)) ? -EFAULT : 0; break; case FBIOPUT_VSCREENINFO: - if (copy_from_user(&var, argp, sizeof(var))) { - ret = -EFAULT; - break; - } + if (copy_from_user(&var, argp, sizeof(var))) + return -EFAULT; + if (!lock_fb_info(info)) + return -ENODEV; acquire_console_sem(); info->flags |= FBINFO_MISC_USEREVENT; ret = fb_set_var(info, &var); info->flags &= ~FBINFO_MISC_USEREVENT; release_console_sem(); - if (ret == 0 && copy_to_user(argp, &var, sizeof(var))) + unlock_fb_info(info); + if (!ret && copy_to_user(argp, &var, sizeof(var))) ret = -EFAULT; break; case FBIOGET_FSCREENINFO: - ret = copy_to_user(argp, &info->fix, - sizeof(fix)) ? -EFAULT : 0; + if (!lock_fb_info(info)) + return -ENODEV; + fix = info->fix; + unlock_fb_info(info); + + ret = copy_to_user(argp, &fix, sizeof(fix)) ? -EFAULT : 0; break; case FBIOPUTCMAP: if (copy_from_user(&cmap, argp, sizeof(cmap))) - ret = -EFAULT; - else - ret = fb_set_user_cmap(&cmap, info); + return -EFAULT; + ret = fb_set_user_cmap(&cmap, info); break; case FBIOGETCMAP: if (copy_from_user(&cmap, argp, sizeof(cmap))) - ret = -EFAULT; - else - ret = fb_cmap_to_user(&info->cmap, &cmap); + return -EFAULT; + if (!lock_fb_info(info)) + return -ENODEV; + cmap_from = info->cmap; + unlock_fb_info(info); + ret = fb_cmap_to_user(&cmap_from, &cmap); break; case FBIOPAN_DISPLAY: - if (copy_from_user(&var, argp, sizeof(var))) { - ret = -EFAULT; - break; - } + if (copy_from_user(&var, argp, sizeof(var))) + return -EFAULT; + if (!lock_fb_info(info)) + return -ENODEV; acquire_console_sem(); ret = fb_pan_display(info, &var); release_console_sem(); + unlock_fb_info(info); if (ret == 0 && copy_to_user(argp, &var, sizeof(var))) - ret = -EFAULT; + return -EFAULT; break; case FBIO_CURSOR: ret = -EINVAL; break; case FBIOGET_CON2FBMAP: if (copy_from_user(&con2fb, argp, sizeof(con2fb))) - ret = -EFAULT; - else if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES) - ret = -EINVAL; - else { - con2fb.framebuffer = -1; - event.info = info; - event.data = &con2fb; - fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP, - &event); - ret = copy_to_user(argp, &con2fb, - sizeof(con2fb)) ? -EFAULT : 0; - } + return -EFAULT; + if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES) + return -EINVAL; + con2fb.framebuffer = -1; + event.data = &con2fb; + + if (!lock_fb_info(info)) + return -ENODEV; + event.info = info; + fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP, &event); + unlock_fb_info(info); + + ret = copy_to_user(argp, &con2fb, sizeof(con2fb)) ? -EFAULT : 0; break; case FBIOPUT_CON2FBMAP: - if (copy_from_user(&con2fb, argp, sizeof(con2fb))) { - ret = -EFAULT; - break; - } - if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES) { - ret = -EINVAL; - break; - } - if (con2fb.framebuffer < 0 || con2fb.framebuffer >= FB_MAX) { - ret = -EINVAL; - break; - } + if (copy_from_user(&con2fb, argp, sizeof(con2fb))) + return -EFAULT; + if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES) + return -EINVAL; + if (con2fb.framebuffer < 0 || con2fb.framebuffer >= FB_MAX) + return -EINVAL; if (!registered_fb[con2fb.framebuffer]) request_module("fb%d", con2fb.framebuffer); if (!registered_fb[con2fb.framebuffer]) { ret = -EINVAL; break; } - event.info = info; event.data = &con2fb; + if (!lock_fb_info(info)) + return -ENODEV; + event.info = info; ret = fb_notifier_call_chain(FB_EVENT_SET_CONSOLE_MAP, &event); + unlock_fb_info(info); break; case FBIOBLANK: + if (!lock_fb_info(info)) + return -ENODEV; acquire_console_sem(); info->flags |= FBINFO_MISC_USEREVENT; ret = fb_blank(info, arg); info->flags &= ~FBINFO_MISC_USEREVENT; release_console_sem(); - break;; + unlock_fb_info(info); + break; default: - if (fb->fb_ioctl == NULL) - ret = -ENOTTY; - else + if (!lock_fb_info(info)) + return -ENODEV; + fb = info->fbops; + if (fb->fb_ioctl) ret = fb->fb_ioctl(info, cmd, arg); + else + ret = -ENOTTY; + unlock_fb_info(info); } return ret; } static long fb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -__acquires(&info->lock) -__releases(&info->lock) { struct inode *inode = file->f_path.dentry->d_inode; int fbidx = iminor(inode); - struct fb_info *info; - long ret; + struct fb_info *info = registered_fb[fbidx]; - info = registered_fb[fbidx]; - mutex_lock(&info->lock); - ret = do_fb_ioctl(info, cmd, arg); - mutex_unlock(&info->lock); - return ret; + return do_fb_ioctl(info, cmd, arg); } #ifdef CONFIG_COMPAT @@ -1257,8 +1264,6 @@ static int fb_get_fscreeninfo(struct fb_info *info, unsigned int cmd, static long fb_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -__acquires(&info->lock) -__releases(&info->lock) { struct inode *inode = file->f_path.dentry->d_inode; int fbidx = iminor(inode); @@ -1266,7 +1271,6 @@ __releases(&info->lock) struct fb_ops *fb = info->fbops; long ret = -ENOIOCTLCMD; - mutex_lock(&info->lock); switch(cmd) { case FBIOGET_VSCREENINFO: case FBIOPUT_VSCREENINFO: @@ -1292,7 +1296,6 @@ __releases(&info->lock) ret = fb->fb_compat_ioctl(info, cmd, arg); break; } - mutex_unlock(&info->lock); return ret; } #endif diff --git a/drivers/video/geode/gx1fb_core.c b/drivers/video/geode/gx1fb_core.c index 751e491ca8c8..f20eff8c4a81 100644 --- a/drivers/video/geode/gx1fb_core.c +++ b/drivers/video/geode/gx1fb_core.c @@ -136,13 +136,10 @@ static int gx1fb_set_par(struct fb_info *info) { struct geodefb_par *par = info->par; - if (info->var.bits_per_pixel == 16) { + if (info->var.bits_per_pixel == 16) info->fix.visual = FB_VISUAL_TRUECOLOR; - fb_dealloc_cmap(&info->cmap); - } else { + else info->fix.visual = FB_VISUAL_PSEUDOCOLOR; - fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0); - } info->fix.line_length = gx1_line_delta(info->var.xres, info->var.bits_per_pixel); @@ -315,6 +312,10 @@ static struct fb_info * __init gx1fb_init_fbinfo(struct device *dev) if (!par->panel_x) par->enable_crt = 1; /* fall back to CRT if no panel is specified */ + if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) { + framebuffer_release(info); + return NULL; + } return info; } @@ -374,8 +375,11 @@ static int __init gx1fb_probe(struct pci_dev *pdev, const struct pci_device_id * release_mem_region(gx1_gx_base() + 0x8300, 0x100); } - if (info) + if (info) { + fb_dealloc_cmap(&info->cmap); framebuffer_release(info); + } + return ret; } @@ -395,6 +399,7 @@ static void gx1fb_remove(struct pci_dev *pdev) iounmap(par->dc_regs); release_mem_region(gx1_gx_base() + 0x8300, 0x100); + fb_dealloc_cmap(&info->cmap); pci_set_drvdata(pdev, NULL); framebuffer_release(info); diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c index 484118926318..2552cac39e1c 100644 --- a/drivers/video/geode/gxfb_core.c +++ b/drivers/video/geode/gxfb_core.c @@ -171,13 +171,10 @@ static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) static int gxfb_set_par(struct fb_info *info) { - if (info->var.bits_per_pixel > 8) { + if (info->var.bits_per_pixel > 8) info->fix.visual = FB_VISUAL_TRUECOLOR; - fb_dealloc_cmap(&info->cmap); - } else { + else info->fix.visual = FB_VISUAL_PSEUDOCOLOR; - fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0); - } info->fix.line_length = gx_line_delta(info->var.xres, info->var.bits_per_pixel); @@ -331,6 +328,11 @@ static struct fb_info * __init gxfb_init_fbinfo(struct device *dev) info->var.grayscale = 0; + if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) { + framebuffer_release(info); + return NULL; + } + return info; } @@ -443,8 +445,10 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i pci_release_region(pdev, 1); } - if (info) + if (info) { + fb_dealloc_cmap(&info->cmap); framebuffer_release(info); + } return ret; } @@ -467,6 +471,7 @@ static void gxfb_remove(struct pci_dev *pdev) iounmap(par->gp_regs); pci_release_region(pdev, 1); + fb_dealloc_cmap(&info->cmap); pci_set_drvdata(pdev, NULL); framebuffer_release(info); diff --git a/drivers/video/geode/lxfb_core.c b/drivers/video/geode/lxfb_core.c index b965ecdbc604..889cbe39e580 100644 --- a/drivers/video/geode/lxfb_core.c +++ b/drivers/video/geode/lxfb_core.c @@ -278,13 +278,10 @@ static int lxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) static int lxfb_set_par(struct fb_info *info) { - if (info->var.bits_per_pixel > 8) { + if (info->var.bits_per_pixel > 8) info->fix.visual = FB_VISUAL_TRUECOLOR; - fb_dealloc_cmap(&info->cmap); - } else { + else info->fix.visual = FB_VISUAL_PSEUDOCOLOR; - fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0); - } info->fix.line_length = lx_get_pitch(info->var.xres, info->var.bits_per_pixel); @@ -451,6 +448,11 @@ static struct fb_info * __init lxfb_init_fbinfo(struct device *dev) info->pseudo_palette = (void *)par + sizeof(struct lxfb_par); + if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) { + framebuffer_release(info); + return NULL; + } + info->var.grayscale = 0; return info; @@ -579,8 +581,10 @@ err: pci_release_region(pdev, 3); } - if (info) + if (info) { + fb_dealloc_cmap(&info->cmap); framebuffer_release(info); + } return ret; } @@ -604,6 +608,7 @@ static void lxfb_remove(struct pci_dev *pdev) iounmap(par->vp_regs); pci_release_region(pdev, 3); + fb_dealloc_cmap(&info->cmap); pci_set_drvdata(pdev, NULL); framebuffer_release(info); } diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index bef6b45e8a5c..330aacbdec1f 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -192,7 +192,7 @@ static irqreturn_t vp_interrupt(int irq, void *opaque) drv = container_of(vp_dev->vdev.dev.driver, struct virtio_driver, driver); - if (drv->config_changed) + if (drv && drv->config_changed) drv->config_changed(&vp_dev->vdev); } diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c index 2c8dff9f77da..1ed3d554e372 100644 --- a/drivers/w1/slaves/w1_therm.c +++ b/drivers/w1/slaves/w1_therm.c @@ -115,7 +115,7 @@ static struct w1_therm_family_converter w1_therm_families[] = { static inline int w1_DS18B20_convert_temp(u8 rom[9]) { - s16 t = (rom[1] << 8) | rom[0]; + int t = ((s16)rom[1] << 8) | rom[0]; t = t*1000/16; return t; } diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c index bf92802f2bbe..36e221beedcd 100644 --- a/drivers/watchdog/rdc321x_wdt.c +++ b/drivers/watchdog/rdc321x_wdt.c @@ -37,7 +37,7 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/mach-rdc321x/rdc321x_defs.h> +#include <asm/rdc321x_defs.h> #define RDC_WDT_MASK 0x80000000 /* Mask */ #define RDC_WDT_EN 0x00800000 /* Enable bit */ diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 2ba8f95516a0..efa4b363ce72 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -498,7 +498,7 @@ static ssize_t store_target_kb(struct sys_device *dev, if (!capable(CAP_SYS_ADMIN)) return -EPERM; - target_bytes = memparse(buf, &endchar); + target_bytes = simple_strtoull(buf, &endchar, 0) * 1024; balloon_set_new_target(target_bytes >> PAGE_SHIFT); @@ -508,8 +508,39 @@ static ssize_t store_target_kb(struct sys_device *dev, static SYSDEV_ATTR(target_kb, S_IRUGO | S_IWUSR, show_target_kb, store_target_kb); + +static ssize_t show_target(struct sys_device *dev, struct sysdev_attribute *attr, + char *buf) +{ + return sprintf(buf, "%llu\n", + (u64)balloon_stats.target_pages << PAGE_SHIFT); +} + +static ssize_t store_target(struct sys_device *dev, + struct sysdev_attribute *attr, + const char *buf, + size_t count) +{ + char *endchar; + unsigned long long target_bytes; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + target_bytes = memparse(buf, &endchar); + + balloon_set_new_target(target_bytes >> PAGE_SHIFT); + + return count; +} + +static SYSDEV_ATTR(target, S_IRUGO | S_IWUSR, + show_target, store_target); + + static struct sysdev_attribute *balloon_attrs[] = { &attr_target_kb, + &attr_target, }; static struct attribute *balloon_info_attrs[] = { diff --git a/drivers/xen/events.c b/drivers/xen/events.c index eb0dfdeaa949..30963af5dba0 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -26,9 +26,11 @@ #include <linux/irq.h> #include <linux/module.h> #include <linux/string.h> +#include <linux/bootmem.h> #include <asm/ptrace.h> #include <asm/irq.h> +#include <asm/idle.h> #include <asm/sync_bitops.h> #include <asm/xen/hypercall.h> #include <asm/xen/hypervisor.h> @@ -50,36 +52,55 @@ static DEFINE_PER_CPU(int, virq_to_irq[NR_VIRQS]) = {[0 ... NR_VIRQS-1] = -1}; /* IRQ <-> IPI mapping */ static DEFINE_PER_CPU(int, ipi_to_irq[XEN_NR_IPIS]) = {[0 ... XEN_NR_IPIS-1] = -1}; -/* Packed IRQ information: binding type, sub-type index, and event channel. */ -struct packed_irq -{ - unsigned short evtchn; - unsigned char index; - unsigned char type; -}; - -static struct packed_irq irq_info[NR_IRQS]; - -/* Binding types. */ -enum { - IRQT_UNBOUND, +/* Interrupt types. */ +enum xen_irq_type { + IRQT_UNBOUND = 0, IRQT_PIRQ, IRQT_VIRQ, IRQT_IPI, IRQT_EVTCHN }; -/* Convenient shorthand for packed representation of an unbound IRQ. */ -#define IRQ_UNBOUND mk_irq_info(IRQT_UNBOUND, 0, 0) +/* + * Packed IRQ information: + * type - enum xen_irq_type + * event channel - irq->event channel mapping + * cpu - cpu this event channel is bound to + * index - type-specific information: + * PIRQ - vector, with MSB being "needs EIO" + * VIRQ - virq number + * IPI - IPI vector + * EVTCHN - + */ +struct irq_info +{ + enum xen_irq_type type; /* type */ + unsigned short evtchn; /* event channel */ + unsigned short cpu; /* cpu bound */ + + union { + unsigned short virq; + enum ipi_vector ipi; + struct { + unsigned short gsi; + unsigned short vector; + } pirq; + } u; +}; + +static struct irq_info irq_info[NR_IRQS]; static int evtchn_to_irq[NR_EVENT_CHANNELS] = { [0 ... NR_EVENT_CHANNELS-1] = -1 }; -static unsigned long cpu_evtchn_mask[NR_CPUS][NR_EVENT_CHANNELS/BITS_PER_LONG]; -static u8 cpu_evtchn[NR_EVENT_CHANNELS]; - -/* Reference counts for bindings to IRQs. */ -static int irq_bindcount[NR_IRQS]; +struct cpu_evtchn_s { + unsigned long bits[NR_EVENT_CHANNELS/BITS_PER_LONG]; +}; +static struct cpu_evtchn_s *cpu_evtchn_mask_p; +static inline unsigned long *cpu_evtchn_mask(int cpu) +{ + return cpu_evtchn_mask_p[cpu].bits; +} /* Xen will never allocate port zero for any purpose. */ #define VALID_EVTCHN(chn) ((chn) != 0) @@ -87,27 +108,108 @@ static int irq_bindcount[NR_IRQS]; static struct irq_chip xen_dynamic_chip; /* Constructor for packed IRQ information. */ -static inline struct packed_irq mk_irq_info(u32 type, u32 index, u32 evtchn) +static struct irq_info mk_unbound_info(void) +{ + return (struct irq_info) { .type = IRQT_UNBOUND }; +} + +static struct irq_info mk_evtchn_info(unsigned short evtchn) +{ + return (struct irq_info) { .type = IRQT_EVTCHN, .evtchn = evtchn, + .cpu = 0 }; +} + +static struct irq_info mk_ipi_info(unsigned short evtchn, enum ipi_vector ipi) { - return (struct packed_irq) { evtchn, index, type }; + return (struct irq_info) { .type = IRQT_IPI, .evtchn = evtchn, + .cpu = 0, .u.ipi = ipi }; +} + +static struct irq_info mk_virq_info(unsigned short evtchn, unsigned short virq) +{ + return (struct irq_info) { .type = IRQT_VIRQ, .evtchn = evtchn, + .cpu = 0, .u.virq = virq }; +} + +static struct irq_info mk_pirq_info(unsigned short evtchn, + unsigned short gsi, unsigned short vector) +{ + return (struct irq_info) { .type = IRQT_PIRQ, .evtchn = evtchn, + .cpu = 0, .u.pirq = { .gsi = gsi, .vector = vector } }; } /* * Accessors for packed IRQ information. */ -static inline unsigned int evtchn_from_irq(int irq) +static struct irq_info *info_for_irq(unsigned irq) +{ + return &irq_info[irq]; +} + +static unsigned int evtchn_from_irq(unsigned irq) { - return irq_info[irq].evtchn; + return info_for_irq(irq)->evtchn; } -static inline unsigned int index_from_irq(int irq) +static enum ipi_vector ipi_from_irq(unsigned irq) { - return irq_info[irq].index; + struct irq_info *info = info_for_irq(irq); + + BUG_ON(info == NULL); + BUG_ON(info->type != IRQT_IPI); + + return info->u.ipi; } -static inline unsigned int type_from_irq(int irq) +static unsigned virq_from_irq(unsigned irq) { - return irq_info[irq].type; + struct irq_info *info = info_for_irq(irq); + + BUG_ON(info == NULL); + BUG_ON(info->type != IRQT_VIRQ); + + return info->u.virq; +} + +static unsigned gsi_from_irq(unsigned irq) +{ + struct irq_info *info = info_for_irq(irq); + + BUG_ON(info == NULL); + BUG_ON(info->type != IRQT_PIRQ); + + return info->u.pirq.gsi; +} + +static unsigned vector_from_irq(unsigned irq) +{ + struct irq_info *info = info_for_irq(irq); + + BUG_ON(info == NULL); + BUG_ON(info->type != IRQT_PIRQ); + + return info->u.pirq.vector; +} + +static enum xen_irq_type type_from_irq(unsigned irq) +{ + return info_for_irq(irq)->type; +} + +static unsigned cpu_from_irq(unsigned irq) +{ + return info_for_irq(irq)->cpu; +} + +static unsigned int cpu_from_evtchn(unsigned int evtchn) +{ + int irq = evtchn_to_irq[evtchn]; + unsigned ret = 0; + + if (irq != -1) + ret = cpu_from_irq(irq); + + return ret; } static inline unsigned long active_evtchns(unsigned int cpu, @@ -115,7 +217,7 @@ static inline unsigned long active_evtchns(unsigned int cpu, unsigned int idx) { return (sh->evtchn_pending[idx] & - cpu_evtchn_mask[cpu][idx] & + cpu_evtchn_mask(cpu)[idx] & ~sh->evtchn_mask[idx]); } @@ -125,13 +227,13 @@ static void bind_evtchn_to_cpu(unsigned int chn, unsigned int cpu) BUG_ON(irq == -1); #ifdef CONFIG_SMP - irq_to_desc(irq)->affinity = cpumask_of_cpu(cpu); + cpumask_copy(irq_to_desc(irq)->affinity, cpumask_of(cpu)); #endif - __clear_bit(chn, cpu_evtchn_mask[cpu_evtchn[chn]]); - __set_bit(chn, cpu_evtchn_mask[cpu]); + __clear_bit(chn, cpu_evtchn_mask(cpu_from_irq(irq))); + __set_bit(chn, cpu_evtchn_mask(cpu)); - cpu_evtchn[chn] = cpu; + irq_info[irq].cpu = cpu; } static void init_evtchn_cpu_bindings(void) @@ -142,17 +244,11 @@ static void init_evtchn_cpu_bindings(void) /* By default all event channels notify CPU#0. */ for_each_irq_desc(i, desc) { - desc->affinity = cpumask_of_cpu(0); + cpumask_copy(desc->affinity, cpumask_of(0)); } #endif - memset(cpu_evtchn, 0, sizeof(cpu_evtchn)); - memset(cpu_evtchn_mask[0], ~0, sizeof(cpu_evtchn_mask[0])); -} - -static inline unsigned int cpu_from_evtchn(unsigned int evtchn) -{ - return cpu_evtchn[evtchn]; + memset(cpu_evtchn_mask(0), ~0, sizeof(cpu_evtchn_mask(0))); } static inline void clear_evtchn(int port) @@ -232,9 +328,8 @@ static int find_unbound_irq(void) int irq; struct irq_desc *desc; - /* Only allocate from dynirq range */ for (irq = 0; irq < nr_irqs; irq++) - if (irq_bindcount[irq] == 0) + if (irq_info[irq].type == IRQT_UNBOUND) break; if (irq == nr_irqs) @@ -244,6 +339,8 @@ static int find_unbound_irq(void) if (WARN_ON(desc == NULL)) return -1; + dynamic_irq_init(irq); + return irq; } @@ -258,16 +355,13 @@ int bind_evtchn_to_irq(unsigned int evtchn) if (irq == -1) { irq = find_unbound_irq(); - dynamic_irq_init(irq); set_irq_chip_and_handler_name(irq, &xen_dynamic_chip, handle_level_irq, "event"); evtchn_to_irq[evtchn] = irq; - irq_info[irq] = mk_irq_info(IRQT_EVTCHN, 0, evtchn); + irq_info[irq] = mk_evtchn_info(evtchn); } - irq_bindcount[irq]++; - spin_unlock(&irq_mapping_update_lock); return irq; @@ -282,12 +376,12 @@ static int bind_ipi_to_irq(unsigned int ipi, unsigned int cpu) spin_lock(&irq_mapping_update_lock); irq = per_cpu(ipi_to_irq, cpu)[ipi]; + if (irq == -1) { irq = find_unbound_irq(); if (irq < 0) goto out; - dynamic_irq_init(irq); set_irq_chip_and_handler_name(irq, &xen_dynamic_chip, handle_level_irq, "ipi"); @@ -298,15 +392,12 @@ static int bind_ipi_to_irq(unsigned int ipi, unsigned int cpu) evtchn = bind_ipi.port; evtchn_to_irq[evtchn] = irq; - irq_info[irq] = mk_irq_info(IRQT_IPI, ipi, evtchn); - + irq_info[irq] = mk_ipi_info(evtchn, ipi); per_cpu(ipi_to_irq, cpu)[ipi] = irq; bind_evtchn_to_cpu(evtchn, cpu); } - irq_bindcount[irq]++; - out: spin_unlock(&irq_mapping_update_lock); return irq; @@ -332,20 +423,17 @@ static int bind_virq_to_irq(unsigned int virq, unsigned int cpu) irq = find_unbound_irq(); - dynamic_irq_init(irq); set_irq_chip_and_handler_name(irq, &xen_dynamic_chip, handle_level_irq, "virq"); evtchn_to_irq[evtchn] = irq; - irq_info[irq] = mk_irq_info(IRQT_VIRQ, virq, evtchn); + irq_info[irq] = mk_virq_info(evtchn, virq); per_cpu(virq_to_irq, cpu)[virq] = irq; bind_evtchn_to_cpu(evtchn, cpu); } - irq_bindcount[irq]++; - spin_unlock(&irq_mapping_update_lock); return irq; @@ -358,7 +446,7 @@ static void unbind_from_irq(unsigned int irq) spin_lock(&irq_mapping_update_lock); - if ((--irq_bindcount[irq] == 0) && VALID_EVTCHN(evtchn)) { + if (VALID_EVTCHN(evtchn)) { close.port = evtchn; if (HYPERVISOR_event_channel_op(EVTCHNOP_close, &close) != 0) BUG(); @@ -366,11 +454,11 @@ static void unbind_from_irq(unsigned int irq) switch (type_from_irq(irq)) { case IRQT_VIRQ: per_cpu(virq_to_irq, cpu_from_evtchn(evtchn)) - [index_from_irq(irq)] = -1; + [virq_from_irq(irq)] = -1; break; case IRQT_IPI: per_cpu(ipi_to_irq, cpu_from_evtchn(evtchn)) - [index_from_irq(irq)] = -1; + [ipi_from_irq(irq)] = -1; break; default: break; @@ -380,7 +468,7 @@ static void unbind_from_irq(unsigned int irq) bind_evtchn_to_cpu(evtchn, 0); evtchn_to_irq[evtchn] = -1; - irq_info[irq] = IRQ_UNBOUND; + irq_info[irq] = mk_unbound_info(); dynamic_irq_cleanup(irq); } @@ -498,8 +586,8 @@ irqreturn_t xen_debug_interrupt(int irq, void *dev_id) for(i = 0; i < NR_EVENT_CHANNELS; i++) { if (sync_test_bit(i, sh->evtchn_pending)) { printk(" %d: event %d -> irq %d\n", - cpu_evtchn[i], i, - evtchn_to_irq[i]); + cpu_from_evtchn(i), i, + evtchn_to_irq[i]); } } @@ -508,7 +596,6 @@ irqreturn_t xen_debug_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } - /* * Search the CPUs pending events bitmasks. For each one found, map * the event number to an irq, and feed it into do_IRQ() for @@ -521,11 +608,15 @@ irqreturn_t xen_debug_interrupt(int irq, void *dev_id) void xen_evtchn_do_upcall(struct pt_regs *regs) { int cpu = get_cpu(); + struct pt_regs *old_regs = set_irq_regs(regs); struct shared_info *s = HYPERVISOR_shared_info; struct vcpu_info *vcpu_info = __get_cpu_var(xen_vcpu); static DEFINE_PER_CPU(unsigned, nesting_count); unsigned count; + exit_idle(); + irq_enter(); + do { unsigned long pending_words; @@ -550,7 +641,7 @@ void xen_evtchn_do_upcall(struct pt_regs *regs) int irq = evtchn_to_irq[port]; if (irq != -1) - xen_do_IRQ(irq, regs); + handle_irq(irq, regs); } } @@ -561,12 +652,17 @@ void xen_evtchn_do_upcall(struct pt_regs *regs) } while(count != 1); out: + irq_exit(); + set_irq_regs(old_regs); + put_cpu(); } /* Rebind a new event channel to an existing irq. */ void rebind_evtchn_irq(int evtchn, int irq) { + struct irq_info *info = info_for_irq(irq); + /* Make sure the irq is masked, since the new event channel will also be masked. */ disable_irq(irq); @@ -576,11 +672,11 @@ void rebind_evtchn_irq(int evtchn, int irq) /* After resume the irq<->evtchn mappings are all cleared out */ BUG_ON(evtchn_to_irq[evtchn] != -1); /* Expect irq to have been bound before, - so the bindcount should be non-0 */ - BUG_ON(irq_bindcount[irq] == 0); + so there should be a proper type */ + BUG_ON(info->type == IRQT_UNBOUND); evtchn_to_irq[evtchn] = irq; - irq_info[irq] = mk_irq_info(IRQT_EVTCHN, 0, evtchn); + irq_info[irq] = mk_evtchn_info(evtchn); spin_unlock(&irq_mapping_update_lock); @@ -690,8 +786,7 @@ static void restore_cpu_virqs(unsigned int cpu) if ((irq = per_cpu(virq_to_irq, cpu)[virq]) == -1) continue; - BUG_ON(irq_info[irq].type != IRQT_VIRQ); - BUG_ON(irq_info[irq].index != virq); + BUG_ON(virq_from_irq(irq) != virq); /* Get a new binding from Xen. */ bind_virq.virq = virq; @@ -703,7 +798,7 @@ static void restore_cpu_virqs(unsigned int cpu) /* Record the new mapping. */ evtchn_to_irq[evtchn] = irq; - irq_info[irq] = mk_irq_info(IRQT_VIRQ, virq, evtchn); + irq_info[irq] = mk_virq_info(evtchn, virq); bind_evtchn_to_cpu(evtchn, cpu); /* Ready for use. */ @@ -720,8 +815,7 @@ static void restore_cpu_ipis(unsigned int cpu) if ((irq = per_cpu(ipi_to_irq, cpu)[ipi]) == -1) continue; - BUG_ON(irq_info[irq].type != IRQT_IPI); - BUG_ON(irq_info[irq].index != ipi); + BUG_ON(ipi_from_irq(irq) != ipi); /* Get a new binding from Xen. */ bind_ipi.vcpu = cpu; @@ -732,7 +826,7 @@ static void restore_cpu_ipis(unsigned int cpu) /* Record the new mapping. */ evtchn_to_irq[evtchn] = irq; - irq_info[irq] = mk_irq_info(IRQT_IPI, ipi, evtchn); + irq_info[irq] = mk_ipi_info(evtchn, ipi); bind_evtchn_to_cpu(evtchn, cpu); /* Ready for use. */ @@ -812,8 +906,11 @@ void xen_irq_resume(void) static struct irq_chip xen_dynamic_chip __read_mostly = { .name = "xen-dyn", + + .disable = disable_dynirq, .mask = disable_dynirq, .unmask = enable_dynirq, + .ack = ack_dynirq, .set_affinity = set_affinity_irq, .retrigger = retrigger_dynirq, @@ -822,6 +919,10 @@ static struct irq_chip xen_dynamic_chip __read_mostly = { void __init xen_init_IRQ(void) { int i; + size_t size = nr_cpu_ids * sizeof(struct cpu_evtchn_s); + + cpu_evtchn_mask_p = alloc_bootmem(size); + BUG_ON(cpu_evtchn_mask_p == NULL); init_evtchn_cpu_bindings(); @@ -829,9 +930,5 @@ void __init xen_init_IRQ(void) for (i = 0; i < NR_EVENT_CHANNELS; i++) mask_evtchn(i); - /* Dynamic IRQ space is currently unbound. Zero the refcnts. */ - for (i = 0; i < nr_irqs; i++) - irq_bindcount[i] = 0; - irq_ctx_init(smp_processor_id()); } diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index 9b91617b9582..e7e83b65c18f 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -100,7 +100,7 @@ static void do_suspend(void) /* XXX use normal device tree? */ xenbus_suspend(); - err = stop_machine(xen_suspend, &cancelled, &cpumask_of_cpu(0)); + err = stop_machine(xen_suspend, &cancelled, cpumask_of(0)); if (err) { printk(KERN_ERR "failed to start xen_suspend: %d\n", err); goto out; |