diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/usb/core/message.c | 32 | ||||
-rw-r--r-- | drivers/usb/gadget/audio.c | 24 | ||||
-rw-r--r-- | drivers/usb/gadget/f_audio.c | 97 | ||||
-rw-r--r-- | drivers/usb/gadget/gmidi.c | 8 | ||||
-rw-r--r-- | drivers/usb/host/ehci-dbg.c | 3 | ||||
-rw-r--r-- | drivers/usb/misc/sisusbvga/sisusb.c | 53 | ||||
-rw-r--r-- | drivers/usb/misc/sisusbvga/sisusb.h | 2 | ||||
-rw-r--r-- | drivers/usb/mon/Kconfig | 4 | ||||
-rw-r--r-- | drivers/usb/mon/Makefile | 2 | ||||
-rw-r--r-- | drivers/usb/mon/mon_bin.c | 12 | ||||
-rw-r--r-- | drivers/usb/mon/mon_dma.c | 95 | ||||
-rw-r--r-- | drivers/usb/mon/mon_main.c | 1 | ||||
-rw-r--r-- | drivers/usb/mon/mon_text.c | 14 | ||||
-rw-r--r-- | drivers/usb/mon/usb_mon.h | 14 |
14 files changed, 99 insertions, 262 deletions
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 2bed83caacb1..df487425b7da 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -459,35 +459,23 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev, io->urbs[i]->context = io; /* - * Some systems need to revert to PIO when DMA is - * temporarily unavailable. For their sakes, both - * transfer_buffer and transfer_dma are set when - * possible. However this can only work on systems - * without: + * Some systems need to revert to PIO when DMA is temporarily + * unavailable. For their sakes, both transfer_buffer and + * transfer_dma are set when possible. * - * - HIGHMEM, since DMA buffers located in high memory - * are not directly addressable by the CPU for PIO; - * - * - IOMMU, since dma_map_sg() is allowed to use an - * IOMMU to make virtually discontiguous buffers be - * "dma-contiguous" so that PIO and DMA need diferent - * numbers of URBs. - * - * So when HIGHMEM or IOMMU are in use, transfer_buffer - * is NULL to prevent stale pointers and to help spot - * bugs. + * Note that if IOMMU coalescing occurred, we cannot + * trust sg_page anymore, so check if S/G list shrunk. */ + if (io->nents == io->entries && !PageHighMem(sg_page(sg))) + io->urbs[i]->transfer_buffer = sg_virt(sg); + else + io->urbs[i]->transfer_buffer = NULL; + if (dma) { io->urbs[i]->transfer_dma = sg_dma_address(sg); len = sg_dma_len(sg); -#if defined(CONFIG_HIGHMEM) || defined(CONFIG_GART_IOMMU) - io->urbs[i]->transfer_buffer = NULL; -#else - io->urbs[i]->transfer_buffer = sg_virt(sg); -#endif } else { /* hc may use _only_ transfer_buffer */ - io->urbs[i]->transfer_buffer = sg_virt(sg); len = sg->length; } diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c index 9f80f4e970bd..a3a0f4a27ef0 100644 --- a/drivers/usb/gadget/audio.c +++ b/drivers/usb/gadget/audio.c @@ -106,20 +106,20 @@ static int audio_set_endpoint_req(struct usb_configuration *c, ctrl->bRequest, w_value, len, ep); switch (ctrl->bRequest) { - case SET_CUR: + case UAC_SET_CUR: value = 0; break; - case SET_MIN: + case UAC_SET_MIN: break; - case SET_MAX: + case UAC_SET_MAX: break; - case SET_RES: + case UAC_SET_RES: break; - case SET_MEM: + case UAC_SET_MEM: break; default: @@ -142,13 +142,13 @@ static int audio_get_endpoint_req(struct usb_configuration *c, ctrl->bRequest, w_value, len, ep); switch (ctrl->bRequest) { - case GET_CUR: - case GET_MIN: - case GET_MAX: - case GET_RES: + case UAC_GET_CUR: + case UAC_GET_MIN: + case UAC_GET_MAX: + case UAC_GET_RES: value = 3; break; - case GET_MEM: + case UAC_GET_MEM: break; default: break; @@ -171,11 +171,11 @@ audio_setup(struct usb_configuration *c, const struct usb_ctrlrequest *ctrl) * Audio class messages; interface activation uses set_alt(). */ switch (ctrl->bRequestType) { - case USB_AUDIO_SET_ENDPOINT: + case USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT: value = audio_set_endpoint_req(c, ctrl); break; - case USB_AUDIO_GET_ENDPOINT: + case USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT: value = audio_get_endpoint_req(c, ctrl); break; diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index 66527ba2d2ea..98e9bb977291 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -28,6 +28,9 @@ static int audio_buf_size = 48000; module_param(audio_buf_size, int, S_IRUGO); MODULE_PARM_DESC(audio_buf_size, "Audio buffer size"); +static int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value); +static int generic_get_cmd(struct usb_audio_control *con, u8 cmd); + /* * DESCRIPTORS ... most are static, but strings and full * configuration descriptors are built on demand. @@ -50,16 +53,16 @@ static struct usb_interface_descriptor ac_interface_desc __initdata = { .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL, }; -DECLARE_USB_AC_HEADER_DESCRIPTOR(2); +DECLARE_UAC_AC_HEADER_DESCRIPTOR(2); -#define USB_DT_AC_HEADER_LENGH USB_DT_AC_HEADER_SIZE(F_AUDIO_NUM_INTERFACES) +#define UAC_DT_AC_HEADER_LENGTH UAC_DT_AC_HEADER_SIZE(F_AUDIO_NUM_INTERFACES) /* B.3.2 Class-Specific AC Interface Descriptor */ -static struct usb_ac_header_descriptor_2 ac_header_desc = { - .bLength = USB_DT_AC_HEADER_LENGH, +static struct uac_ac_header_descriptor_2 ac_header_desc = { + .bLength = UAC_DT_AC_HEADER_LENGTH, .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = HEADER, + .bDescriptorSubtype = UAC_HEADER, .bcdADC = __constant_cpu_to_le16(0x0100), - .wTotalLength = __constant_cpu_to_le16(USB_DT_AC_HEADER_LENGH), + .wTotalLength = __constant_cpu_to_le16(UAC_DT_AC_HEADER_LENGTH), .bInCollection = F_AUDIO_NUM_INTERFACES, .baInterfaceNr = { [0] = F_AUDIO_AC_INTERFACE, @@ -68,33 +71,33 @@ static struct usb_ac_header_descriptor_2 ac_header_desc = { }; #define INPUT_TERMINAL_ID 1 -static struct usb_input_terminal_descriptor input_terminal_desc = { - .bLength = USB_DT_AC_INPUT_TERMINAL_SIZE, +static struct uac_input_terminal_descriptor input_terminal_desc = { + .bLength = UAC_DT_INPUT_TERMINAL_SIZE, .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = INPUT_TERMINAL, + .bDescriptorSubtype = UAC_INPUT_TERMINAL, .bTerminalID = INPUT_TERMINAL_ID, - .wTerminalType = USB_AC_TERMINAL_STREAMING, + .wTerminalType = UAC_TERMINAL_STREAMING, .bAssocTerminal = 0, .wChannelConfig = 0x3, }; -DECLARE_USB_AC_FEATURE_UNIT_DESCRIPTOR(0); +DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(0); #define FEATURE_UNIT_ID 2 -static struct usb_ac_feature_unit_descriptor_0 feature_unit_desc = { - .bLength = USB_DT_AC_FEATURE_UNIT_SIZE(0), +static struct uac_feature_unit_descriptor_0 feature_unit_desc = { + .bLength = UAC_DT_FEATURE_UNIT_SIZE(0), .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = FEATURE_UNIT, + .bDescriptorSubtype = UAC_FEATURE_UNIT, .bUnitID = FEATURE_UNIT_ID, .bSourceID = INPUT_TERMINAL_ID, .bControlSize = 2, - .bmaControls[0] = (FU_MUTE | FU_VOLUME), + .bmaControls[0] = (UAC_FU_MUTE | UAC_FU_VOLUME), }; static struct usb_audio_control mute_control = { .list = LIST_HEAD_INIT(mute_control.list), .name = "Mute Control", - .type = MUTE_CONTROL, + .type = UAC_MUTE_CONTROL, /* Todo: add real Mute control code */ .set = generic_set_cmd, .get = generic_get_cmd, @@ -103,7 +106,7 @@ static struct usb_audio_control mute_control = { static struct usb_audio_control volume_control = { .list = LIST_HEAD_INIT(volume_control.list), .name = "Volume Control", - .type = VOLUME_CONTROL, + .type = UAC_VOLUME_CONTROL, /* Todo: add real Volume control code */ .set = generic_set_cmd, .get = generic_get_cmd, @@ -113,17 +116,17 @@ static struct usb_audio_control_selector feature_unit = { .list = LIST_HEAD_INIT(feature_unit.list), .id = FEATURE_UNIT_ID, .name = "Mute & Volume Control", - .type = FEATURE_UNIT, + .type = UAC_FEATURE_UNIT, .desc = (struct usb_descriptor_header *)&feature_unit_desc, }; #define OUTPUT_TERMINAL_ID 3 -static struct usb_output_terminal_descriptor output_terminal_desc = { - .bLength = USB_DT_AC_OUTPUT_TERMINAL_SIZE, +static struct uac_output_terminal_descriptor output_terminal_desc = { + .bLength = UAC_DT_OUTPUT_TERMINAL_SIZE, .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = OUTPUT_TERMINAL, + .bDescriptorSubtype = UAC_OUTPUT_TERMINAL, .bTerminalID = OUTPUT_TERMINAL_ID, - .wTerminalType = USB_AC_OUTPUT_TERMINAL_SPEAKER, + .wTerminalType = UAC_OUTPUT_TERMINAL_SPEAKER, .bAssocTerminal = FEATURE_UNIT_ID, .bSourceID = FEATURE_UNIT_ID, }; @@ -148,22 +151,22 @@ static struct usb_interface_descriptor as_interface_alt_1_desc = { }; /* B.4.2 Class-Specific AS Interface Descriptor */ -static struct usb_as_header_descriptor as_header_desc = { - .bLength = USB_DT_AS_HEADER_SIZE, +static struct uac_as_header_descriptor as_header_desc = { + .bLength = UAC_DT_AS_HEADER_SIZE, .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = AS_GENERAL, + .bDescriptorSubtype = UAC_AS_GENERAL, .bTerminalLink = INPUT_TERMINAL_ID, .bDelay = 1, - .wFormatTag = USB_AS_AUDIO_FORMAT_TYPE_I_PCM, + .wFormatTag = UAC_FORMAT_TYPE_I_PCM, }; -DECLARE_USB_AS_FORMAT_TYPE_I_DISCRETE_DESC(1); +DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(1); -static struct usb_as_formate_type_i_discrete_descriptor_1 as_type_i_desc = { - .bLength = USB_AS_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(1), +static struct uac_format_type_i_discrete_descriptor_1 as_type_i_desc = { + .bLength = UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(1), .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = FORMAT_TYPE, - .bFormatType = USB_AS_FORMAT_TYPE_I, + .bDescriptorSubtype = UAC_FORMAT_TYPE, + .bFormatType = UAC_FORMAT_TYPE_I, .bSubframeSize = 2, .bBitResolution = 16, .bSamFreqType = 1, @@ -174,17 +177,17 @@ static struct usb_endpoint_descriptor as_out_ep_desc __initdata = { .bLength = USB_DT_ENDPOINT_AUDIO_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_OUT, - .bmAttributes = USB_AS_ENDPOINT_ADAPTIVE + .bmAttributes = USB_ENDPOINT_SYNC_ADAPTIVE | USB_ENDPOINT_XFER_ISOC, .wMaxPacketSize = __constant_cpu_to_le16(OUT_EP_MAX_PACKET_SIZE), .bInterval = 4, }; /* Class-specific AS ISO OUT Endpoint Descriptor */ -static struct usb_as_iso_endpoint_descriptor as_iso_out_desc __initdata = { - .bLength = USB_AS_ISO_ENDPOINT_DESC_SIZE, +static struct uac_iso_endpoint_descriptor as_iso_out_desc __initdata = { + .bLength = UAC_ISO_ENDPOINT_DESC_SIZE, .bDescriptorType = USB_DT_CS_ENDPOINT, - .bDescriptorSubtype = EP_GENERAL, + .bDescriptorSubtype = UAC_EP_GENERAL, .bmAttributes = 1, .bLockDelayUnits = 1, .wLockDelay = __constant_cpu_to_le16(1), @@ -456,11 +459,11 @@ f_audio_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) * Audio class messages; interface activation uses set_alt(). */ switch (ctrl->bRequestType) { - case USB_AUDIO_SET_INTF: + case USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE: value = audio_set_intf_req(f, ctrl); break; - case USB_AUDIO_GET_INTF: + case USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE: value = audio_get_intf_req(f, ctrl); break; @@ -632,6 +635,18 @@ f_audio_unbind(struct usb_configuration *c, struct usb_function *f) /*-------------------------------------------------------------------------*/ +static int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value) +{ + con->data[cmd] = value; + + return 0; +} + +static int generic_get_cmd(struct usb_audio_control *con, u8 cmd) +{ + return con->data[cmd]; +} + /* Todo: add more control selecotor dynamically */ int __init control_selector_init(struct f_audio *audio) { @@ -642,10 +657,10 @@ int __init control_selector_init(struct f_audio *audio) list_add(&mute_control.list, &feature_unit.control); list_add(&volume_control.list, &feature_unit.control); - volume_control.data[_CUR] = 0xffc0; - volume_control.data[_MIN] = 0xe3a0; - volume_control.data[_MAX] = 0xfff0; - volume_control.data[_RES] = 0x0030; + volume_control.data[UAC__CUR] = 0xffc0; + volume_control.data[UAC__MIN] = 0xe3a0; + volume_control.data[UAC__MAX] = 0xfff0; + volume_control.data[UAC__RES] = 0x0030; return 0; } diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index b9312dc6e041..d0b1e836f0e0 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -191,7 +191,7 @@ module_param(qlen, uint, S_IRUGO); #define GMIDI_MS_INTERFACE 1 #define GMIDI_NUM_INTERFACES 2 -DECLARE_USB_AC_HEADER_DESCRIPTOR(1); +DECLARE_UAC_AC_HEADER_DESCRIPTOR(1); DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1); DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(1); @@ -237,12 +237,12 @@ static const struct usb_interface_descriptor ac_interface_desc = { }; /* B.3.2 Class-Specific AC Interface Descriptor */ -static const struct usb_ac_header_descriptor_1 ac_header_desc = { - .bLength = USB_DT_AC_HEADER_SIZE(1), +static const struct uac_ac_header_descriptor_1 ac_header_desc = { + .bLength = UAC_DT_AC_HEADER_SIZE(1), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = USB_MS_HEADER, .bcdADC = cpu_to_le16(0x0100), - .wTotalLength = cpu_to_le16(USB_DT_AC_HEADER_SIZE(1)), + .wTotalLength = cpu_to_le16(UAC_DT_AC_HEADER_SIZE(1)), .bInCollection = 1, .baInterfaceNr = { [0] = GMIDI_MS_INTERFACE, diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 7f4ace73d44a..1104caa0803b 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -879,8 +879,7 @@ static int debug_close(struct inode *inode, struct file *file) struct debug_buffer *buf = file->private_data; if (buf) { - if (buf->output_buf) - vfree(buf->output_buf); + vfree(buf->output_buf); kfree(buf); } diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index b4ec716de7da..0025847743f3 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -79,14 +79,12 @@ sisusb_free_buffers(struct sisusb_usb_data *sisusb) for (i = 0; i < NUMOBUFS; i++) { if (sisusb->obuf[i]) { - usb_buffer_free(sisusb->sisusb_dev, sisusb->obufsize, - sisusb->obuf[i], sisusb->transfer_dma_out[i]); + kfree(sisusb->obuf[i]); sisusb->obuf[i] = NULL; } } if (sisusb->ibuf) { - usb_buffer_free(sisusb->sisusb_dev, sisusb->ibufsize, - sisusb->ibuf, sisusb->transfer_dma_in); + kfree(sisusb->ibuf); sisusb->ibuf = NULL; } } @@ -230,8 +228,7 @@ sisusb_bulk_completeout(struct urb *urb) static int sisusb_bulkout_msg(struct sisusb_usb_data *sisusb, int index, unsigned int pipe, void *data, - int len, int *actual_length, int timeout, unsigned int tflags, - dma_addr_t transfer_dma) + int len, int *actual_length, int timeout, unsigned int tflags) { struct urb *urb = sisusb->sisurbout[index]; int retval, byteswritten = 0; @@ -245,9 +242,6 @@ sisusb_bulkout_msg(struct sisusb_usb_data *sisusb, int index, unsigned int pipe, urb->transfer_flags |= tflags; urb->actual_length = 0; - if ((urb->transfer_dma = transfer_dma)) - urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - /* Set up context */ sisusb->urbout_context[index].actual_length = (timeout) ? NULL : actual_length; @@ -297,8 +291,8 @@ sisusb_bulk_completein(struct urb *urb) } static int -sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data, int len, - int *actual_length, int timeout, unsigned int tflags, dma_addr_t transfer_dma) +sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data, + int len, int *actual_length, int timeout, unsigned int tflags) { struct urb *urb = sisusb->sisurbin; int retval, readbytes = 0; @@ -311,9 +305,6 @@ sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data, urb->transfer_flags |= tflags; urb->actual_length = 0; - if ((urb->transfer_dma = transfer_dma)) - urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - sisusb->completein = 0; retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval == 0) { @@ -422,8 +413,7 @@ static int sisusb_send_bulk_msg(struct sisusb_usb_data *sisusb, int ep, int len, thispass, &transferred_len, async ? 0 : 5 * HZ, - tflags, - sisusb->transfer_dma_out[index]); + tflags); if (result == -ETIMEDOUT) { @@ -432,29 +422,16 @@ static int sisusb_send_bulk_msg(struct sisusb_usb_data *sisusb, int ep, int len, return -ETIME; continue; + } - } else if ((result == 0) && !async && transferred_len) { + if ((result == 0) && !async && transferred_len) { thispass -= transferred_len; - if (thispass) { - if (sisusb->transfer_dma_out) { - /* If DMA, copy remaining - * to beginning of buffer - */ - memcpy(buffer, - buffer + transferred_len, - thispass); - } else { - /* If not DMA, simply increase - * the pointer - */ - buffer += transferred_len; - } - } + buffer += transferred_len; } else break; - }; + } if (result) return result; @@ -530,8 +507,7 @@ static int sisusb_recv_bulk_msg(struct sisusb_usb_data *sisusb, int ep, int len, thispass, &transferred_len, 5 * HZ, - tflags, - sisusb->transfer_dma_in); + tflags); if (transferred_len) thispass = transferred_len; @@ -3132,8 +3108,7 @@ static int sisusb_probe(struct usb_interface *intf, /* Allocate buffers */ sisusb->ibufsize = SISUSB_IBUF_SIZE; - if (!(sisusb->ibuf = usb_buffer_alloc(dev, SISUSB_IBUF_SIZE, - GFP_KERNEL, &sisusb->transfer_dma_in))) { + if (!(sisusb->ibuf = kmalloc(SISUSB_IBUF_SIZE, GFP_KERNEL))) { dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate memory for input buffer"); retval = -ENOMEM; goto error_2; @@ -3142,9 +3117,7 @@ static int sisusb_probe(struct usb_interface *intf, sisusb->numobufs = 0; sisusb->obufsize = SISUSB_OBUF_SIZE; for (i = 0; i < NUMOBUFS; i++) { - if (!(sisusb->obuf[i] = usb_buffer_alloc(dev, SISUSB_OBUF_SIZE, - GFP_KERNEL, - &sisusb->transfer_dma_out[i]))) { + if (!(sisusb->obuf[i] = kmalloc(SISUSB_OBUF_SIZE, GFP_KERNEL))) { if (i == 0) { dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate memory for output buffer\n"); retval = -ENOMEM; diff --git a/drivers/usb/misc/sisusbvga/sisusb.h b/drivers/usb/misc/sisusbvga/sisusb.h index cf0b4a5883f6..55492a5930bd 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.h +++ b/drivers/usb/misc/sisusbvga/sisusb.h @@ -123,8 +123,6 @@ struct sisusb_usb_data { int numobufs; /* number of obufs = number of out urbs */ char *obuf[NUMOBUFS], *ibuf; /* transfer buffers */ int obufsize, ibufsize; - dma_addr_t transfer_dma_out[NUMOBUFS]; - dma_addr_t transfer_dma_in; struct urb *sisurbout[NUMOBUFS]; struct urb *sisurbin; unsigned char urbstatus[NUMOBUFS]; diff --git a/drivers/usb/mon/Kconfig b/drivers/usb/mon/Kconfig index f28f350cd96a..635745f57fbd 100644 --- a/drivers/usb/mon/Kconfig +++ b/drivers/usb/mon/Kconfig @@ -5,11 +5,9 @@ config USB_MON tristate "USB Monitor" depends on USB - default y if USB=y - default m if USB=m help If you select this option, a component which captures the USB traffic between peripheral-specific drivers and HC drivers will be built. For more information, see <file:Documentation/usb/usbmon.txt>. - If unsure, say Y (if allowed), otherwise M. + If unsure, say Y, if allowed, otherwise M. diff --git a/drivers/usb/mon/Makefile b/drivers/usb/mon/Makefile index c6516b566731..384b198faa7c 100644 --- a/drivers/usb/mon/Makefile +++ b/drivers/usb/mon/Makefile @@ -2,6 +2,6 @@ # Makefile for USB monitor # -usbmon-objs := mon_main.o mon_stat.o mon_text.o mon_bin.o mon_dma.o +usbmon-objs := mon_main.o mon_stat.o mon_text.o mon_bin.o obj-$(CONFIG_USB_MON) += usbmon.o diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index 0f7a30b7d2d1..dfdc43e2e00d 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -220,9 +220,8 @@ static void mon_free_buff(struct mon_pgmap *map, int npages); /* * This is a "chunked memcpy". It does not manipulate any counters. - * But it returns the new offset for repeated application. */ -unsigned int mon_copy_to_buff(const struct mon_reader_bin *this, +static void mon_copy_to_buff(const struct mon_reader_bin *this, unsigned int off, const unsigned char *from, unsigned int length) { unsigned int step_len; @@ -247,7 +246,6 @@ unsigned int mon_copy_to_buff(const struct mon_reader_bin *this, from += step_len; length -= step_len; } - return off; } /* @@ -400,15 +398,8 @@ static char mon_bin_get_data(const struct mon_reader_bin *rp, unsigned int offset, struct urb *urb, unsigned int length) { - if (urb->dev->bus->uses_dma && - (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) { - mon_dmapeek_vec(rp, offset, urb->transfer_dma, length); - return 0; - } - if (urb->transfer_buffer == NULL) return 'Z'; - mon_copy_to_buff(rp, offset, urb->transfer_buffer, length); return 0; } @@ -635,7 +626,6 @@ static int mon_bin_open(struct inode *inode, struct file *file) spin_lock_init(&rp->b_lock); init_waitqueue_head(&rp->b_wait); mutex_init(&rp->fetch_lock); - rp->b_size = BUFF_DFL; size = sizeof(struct mon_pgmap) * (rp->b_size/CHUNK_SIZE); diff --git a/drivers/usb/mon/mon_dma.c b/drivers/usb/mon/mon_dma.c deleted file mode 100644 index 140cc80bd2b1..000000000000 --- a/drivers/usb/mon/mon_dma.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * The USB Monitor, inspired by Dave Harding's USBMon. - * - * mon_dma.c: Library which snoops on DMA areas. - * - * Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com) - */ -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/highmem.h> -#include <asm/page.h> - -#include <linux/usb.h> /* Only needed for declarations in usb_mon.h */ -#include "usb_mon.h" - -/* - * PC-compatibles, are, fortunately, sufficiently cache-coherent for this. - */ -#if defined(__i386__) || defined(__x86_64__) /* CONFIG_ARCH_I386 doesn't exit */ -#define MON_HAS_UNMAP 1 - -#define phys_to_page(phys) pfn_to_page((phys) >> PAGE_SHIFT) - -char mon_dmapeek(unsigned char *dst, dma_addr_t dma_addr, int len) -{ - struct page *pg; - unsigned long flags; - unsigned char *map; - unsigned char *ptr; - - /* - * On i386, a DMA handle is the "physical" address of a page. - * In other words, the bus address is equal to physical address. - * There is no IOMMU. - */ - pg = phys_to_page(dma_addr); - - /* - * We are called from hardware IRQs in case of callbacks. - * But we can be called from softirq or process context in case - * of submissions. In such case, we need to protect KM_IRQ0. - */ - local_irq_save(flags); - map = kmap_atomic(pg, KM_IRQ0); - ptr = map + (dma_addr & (PAGE_SIZE-1)); - memcpy(dst, ptr, len); - kunmap_atomic(map, KM_IRQ0); - local_irq_restore(flags); - return 0; -} - -void mon_dmapeek_vec(const struct mon_reader_bin *rp, - unsigned int offset, dma_addr_t dma_addr, unsigned int length) -{ - unsigned long flags; - unsigned int step_len; - struct page *pg; - unsigned char *map; - unsigned long page_off, page_len; - - local_irq_save(flags); - while (length) { - /* compute number of bytes we are going to copy in this page */ - step_len = length; - page_off = dma_addr & (PAGE_SIZE-1); - page_len = PAGE_SIZE - page_off; - if (page_len < step_len) - step_len = page_len; - - /* copy data and advance pointers */ - pg = phys_to_page(dma_addr); - map = kmap_atomic(pg, KM_IRQ0); - offset = mon_copy_to_buff(rp, offset, map + page_off, step_len); - kunmap_atomic(map, KM_IRQ0); - dma_addr += step_len; - length -= step_len; - } - local_irq_restore(flags); -} - -#endif /* __i386__ */ - -#ifndef MON_HAS_UNMAP -char mon_dmapeek(unsigned char *dst, dma_addr_t dma_addr, int len) -{ - return 'D'; -} - -void mon_dmapeek_vec(const struct mon_reader_bin *rp, - unsigned int offset, dma_addr_t dma_addr, unsigned int length) -{ - ; -} - -#endif /* MON_HAS_UNMAP */ diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c index 5e0ab4201c00..e0c2db3b767b 100644 --- a/drivers/usb/mon/mon_main.c +++ b/drivers/usb/mon/mon_main.c @@ -361,7 +361,6 @@ static int __init mon_init(void) } // MOD_INC_USE_COUNT(which_module?); - mutex_lock(&usb_bus_list_lock); list_for_each_entry (ubus, &usb_bus_list, bus_list) { mon_bus_init(ubus); diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c index a7eb4c99342c..9f1a9227ebe6 100644 --- a/drivers/usb/mon/mon_text.c +++ b/drivers/usb/mon/mon_text.c @@ -150,20 +150,6 @@ static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb, return '>'; } - /* - * The check to see if it's safe to poke at data has an enormous - * number of corner cases, but it seems that the following is - * more or less safe. - * - * We do not even try to look at transfer_buffer, because it can - * contain non-NULL garbage in case the upper level promised to - * set DMA for the HCD. - */ - if (urb->dev->bus->uses_dma && - (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) { - return mon_dmapeek(ep->data, urb->transfer_dma, len); - } - if (urb->transfer_buffer == NULL) return 'Z'; /* '0' would be not as pretty. */ diff --git a/drivers/usb/mon/usb_mon.h b/drivers/usb/mon/usb_mon.h index f5d84ff8c101..df9a4df342c7 100644 --- a/drivers/usb/mon/usb_mon.h +++ b/drivers/usb/mon/usb_mon.h @@ -65,20 +65,6 @@ int __init mon_bin_init(void); void mon_bin_exit(void); /* - * DMA interface. - * - * XXX The vectored side needs a serious re-thinking. Abstracting vectors, - * like in Paolo's original patch, produces a double pkmap. We need an idea. -*/ -extern char mon_dmapeek(unsigned char *dst, dma_addr_t dma_addr, int len); - -struct mon_reader_bin; -extern void mon_dmapeek_vec(const struct mon_reader_bin *rp, - unsigned int offset, dma_addr_t dma_addr, unsigned int len); -extern unsigned int mon_copy_to_buff(const struct mon_reader_bin *rp, - unsigned int offset, const unsigned char *from, unsigned int len); - -/* */ extern struct mutex mon_lock; |