diff options
Diffstat (limited to 'drivers')
539 files changed, 13548 insertions, 4754 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index f4f632917509..b0243fd55ac0 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -312,9 +312,13 @@ config ACPI_DEBUG bool "Debug Statements" default n help - The ACPI driver can optionally report errors with a great deal - of verbosity. Saying Y enables these statements. This will increase - your kernel size by around 50K. + The ACPI subsystem can produce debug output. Saying Y enables this + output and increases the kernel size by around 50K. + + Use the acpi.debug_layer and acpi.debug_level kernel command-line + parameters documented in Documentation/acpi/debug.txt and + Documentation/kernel-parameters.txt to control the type and + amount of debug output. config ACPI_DEBUG_FUNC_TRACE bool "Additionally enable ACPI function tracing" @@ -324,14 +328,6 @@ config ACPI_DEBUG_FUNC_TRACE ACPI Debug Statements slow down ACPI processing. Function trace is about half of the penalty and is rarely useful. -config ACPI_EC - bool - default y - help - This driver is required on some systems for the proper operation of - the battery and thermal drivers. If you are compiling for a - mobile system, say Y. - config ACPI_PCI_SLOT tristate "PCI slot detection driver" default n @@ -341,10 +337,6 @@ config ACPI_PCI_SLOT help you correlate PCI bus addresses with the physical geography of your slots. If you are unsure, say N. -config ACPI_POWER - bool - default y - config ACPI_SYSTEM bool default y diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index d91c027ece8f..3c0c93300f12 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -39,19 +39,23 @@ obj-y += sleep/ obj-y += bus.o glue.o obj-y += scan.o # Keep EC driver first. Initialization of others depend on it. -obj-$(CONFIG_ACPI_EC) += ec.o +obj-y += ec.o obj-$(CONFIG_ACPI_AC) += ac.o obj-$(CONFIG_ACPI_BATTERY) += battery.o obj-$(CONFIG_ACPI_BUTTON) += button.o obj-$(CONFIG_ACPI_FAN) += fan.o obj-$(CONFIG_ACPI_DOCK) += dock.o obj-$(CONFIG_ACPI_VIDEO) += video.o +ifdef CONFIG_ACPI_VIDEO +obj-y += video_detect.o +endif + obj-y += pci_root.o pci_link.o pci_irq.o pci_bind.o obj-$(CONFIG_ACPI_PCI_SLOT) += pci_slot.o obj-$(CONFIG_ACPI_PROCESSOR) += processor.o obj-$(CONFIG_ACPI_CONTAINER) += container.o obj-$(CONFIG_ACPI_THERMAL) += thermal.o -obj-$(CONFIG_ACPI_POWER) += power.o +obj-y += power.o obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o obj-$(CONFIG_ACPI_DEBUG) += debug.o obj-$(CONFIG_ACPI_NUMA) += numa.o diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index d72a1b6c8a94..9b917dac7732 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -37,7 +37,6 @@ #include <acpi/acpi_bus.h> #include <acpi/acpi_drivers.h> -#define ACPI_AC_COMPONENT 0x00020000 #define ACPI_AC_CLASS "ac_adapter" #define ACPI_AC_DEVICE_NAME "AC Adapter" #define ACPI_AC_FILE_STATE "state" @@ -242,7 +241,7 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data) acpi_ac_get_state(ac); acpi_bus_generate_proc_event(device, event, (u32) ac->state); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, + dev_name(&device->dev), event, (u32) ac->state); #ifdef CONFIG_ACPI_SYSFS_POWER kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE); diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c index 71d21c51c45f..63a17b55b39b 100644 --- a/drivers/acpi/acpi_memhotplug.c +++ b/drivers/acpi/acpi_memhotplug.c @@ -32,7 +32,6 @@ #include <linux/memory_hotplug.h> #include <acpi/acpi_drivers.h> -#define ACPI_MEMORY_DEVICE_COMPONENT 0x08000000UL #define ACPI_MEMORY_DEVICE_CLASS "memory" #define ACPI_MEMORY_DEVICE_HID "PNP0C80" #define ACPI_MEMORY_DEVICE_NAME "Hotplug Mem Device" diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index b2133e89ad9a..1423b0c0cd2e 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -46,7 +46,6 @@ #define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF -#define ACPI_BATTERY_COMPONENT 0x00040000 #define ACPI_BATTERY_CLASS "battery" #define ACPI_BATTERY_DEVICE_NAME "Battery" #define ACPI_BATTERY_NOTIFY_STATUS 0x80 @@ -782,7 +781,7 @@ static void acpi_battery_notify(acpi_handle handle, u32 event, void *data) acpi_bus_generate_proc_event(device, event, acpi_battery_present(battery)); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, + dev_name(&device->dev), event, acpi_battery_present(battery)); #ifdef CONFIG_ACPI_SYSFS_POWER /* acpi_batter_update could remove power_supply object */ diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index ea92bac42c53..09c69806c1fc 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -176,16 +176,6 @@ static int __init dmi_enable_osi_linux(const struct dmi_system_id *d) acpi_dmi_osi_linux(1, d); /* enable */ return 0; } -static int __init dmi_disable_osi_linux(const struct dmi_system_id *d) -{ - acpi_dmi_osi_linux(0, d); /* disable */ - return 0; -} -static int __init dmi_unknown_osi_linux(const struct dmi_system_id *d) -{ - acpi_dmi_osi_linux(-1, d); /* unknown */ - return 0; -} static int __init dmi_disable_osi_vista(const struct dmi_system_id *d) { printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident); @@ -193,295 +183,21 @@ static int __init dmi_disable_osi_vista(const struct dmi_system_id *d) return 0; } -/* - * Most BIOS that invoke OSI(Linux) do nothing with it. - * But some cause Linux to break. - * Only a couple use it to make Linux run better. - * - * Thus, Linux should continue to disable OSI(Linux) by default, - * should continue to discourage BIOS writers from using it, and - * should whitelist the few existing systems that require it. - * - * If it appears clear a vendor isn't using OSI(Linux) - * for anything constructive, blacklist them by name to disable - * unnecessary dmesg warnings on all of their products. - */ - static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { - /* - * Disable OSI(Linux) warnings on all "Acer, inc." - * - * _OSI(Linux) disables the latest Windows BIOS code: - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3100"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5050"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5580"), - * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 3010"), - * _OSI(Linux) effect unknown: - * DMI_MATCH(DMI_PRODUCT_NAME, "Ferrari 5000"), - */ - /* - * note that dmi_check_system() uses strstr() - * to match sub-strings rather than !strcmp(), - * so "Acer" below matches "Acer, inc." above. - */ - /* - * Disable OSI(Linux) warnings on all "Acer" - * - * _OSI(Linux) effect unknown: - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720Z"), - * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5520"), - * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 6460"), - * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 7510"), - * - * _OSI(Linux) is a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5220"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Acer", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Acer"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "Apple Computer, Inc." - * Disable OSI(Linux) warnings on all "Apple Inc." - * - * _OSI(Linux) confirmed to be a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"), - * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook2,1"), - * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2"), - * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"), - * _OSI(Linux) effect unknown: - * DMI_MATCH(DMI_PRODUCT_NAME, "MacPro2,1"), - * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,1"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Apple", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "BenQ" - * - * _OSI(Linux) confirmed to be a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "Joybook S31"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "BenQ", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "BenQ"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "Clevo Co." - * - * _OSI(Linux) confirmed to be a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "M570RU"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Clevo", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."), - }, - }, - /* - * Disable OSI(Linux) warnings on all "COMPAL" - * - * _OSI(Linux) confirmed to be a NOP: - * DMI_MATCH(DMI_BOARD_NAME, "HEL8X"), - * _OSI(Linux) unknown effect: - * DMI_MATCH(DMI_BOARD_NAME, "IFL91"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Compal", - .matches = { - DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"), - }, - }, - { /* OSI(Linux) touches USB, unknown side-effect */ - .callback = dmi_disable_osi_linux, - .ident = "Dell Dimension 5150", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM051"), - }, - }, - { /* OSI(Linux) is a NOP */ - .callback = dmi_disable_osi_linux, - .ident = "Dell i1501", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1501"), - }, - }, - { /* OSI(Linux) effect unknown */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell Latitude D830", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D830"), - }, - }, - { /* OSI(Linux) effect unknown */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell OptiPlex GX620", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX620"), - }, - }, - { /* OSI(Linux) causes some USB initialization to not run */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell OptiPlex 755", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 755"), - }, - }, - { /* OSI(Linux) effect unknown */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell PE 1900", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1900"), - }, - }, - { /* OSI(Linux) is a NOP */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell PE 1950", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"), - }, - }, - { /* OSI(Linux) is a NOP */ - .callback = dmi_disable_osi_linux, - .ident = "Dell PE R200", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R200"), - }, - }, - { /* OSI(Linux) touches USB */ - .callback = dmi_disable_osi_linux, - .ident = "Dell PR 390", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 390"), - }, - }, - { /* OSI(Linux) touches USB */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell PR 390", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 690"), - }, - }, - { /* OSI(Linux) unknown - ASL looks benign, but may effect dock/SMM */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell PR M4300", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Precision M4300"), - }, - }, - { /* OSI(Linux) is a NOP */ - .callback = dmi_disable_osi_linux, - .ident = "Dell Vostro 1000", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1000"), - }, - }, - { /* OSI(Linux) effect unknown */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell PE SC440", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge SC440"), - }, - }, - { /* OSI(Linux) effect unknown */ - .callback = dmi_unknown_osi_linux, - .ident = "Dialogue Flybook V5", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dialogue Technology Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "Flybook V5"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "FUJITSU SIEMENS" - * - * _OSI(Linux) disables latest Windows BIOS code: - * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2510"), - * _OSI(Linux) confirmed to be a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1536"), - * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1556"), - * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 1546"), - * DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"), - * _OSI(Linux) unknown effect: - * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo M1425"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo Si 1520"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Fujitsu Siemens", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), - }, - }, { .callback = dmi_disable_osi_vista, .ident = "Fujitsu Siemens", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), - DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"), + DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"), }, }, + /* - * Disable OSI(Linux) warnings on all "Hewlett-Packard" - * - * _OSI(Linux) confirmed to be a NOP: - * .ident = "HP Pavilion tx 1000" - * DMI_MATCH(DMI_BOARD_NAME, "30BF"), - * .ident = "HP Pavilion dv2000" - * DMI_MATCH(DMI_BOARD_NAME, "30B5"), - * .ident = "HP Pavilion dv5000", - * DMI_MATCH(DMI_BOARD_NAME, "30A7"), - * .ident = "HP Pavilion dv6300 30BC", - * DMI_MATCH(DMI_BOARD_NAME, "30BC"), - * .ident = "HP Pavilion dv6000", - * DMI_MATCH(DMI_BOARD_NAME, "30B7"), - * DMI_MATCH(DMI_BOARD_NAME, "30B8"), - * .ident = "HP Pavilion dv9000", - * DMI_MATCH(DMI_BOARD_NAME, "30B9"), - * .ident = "HP Pavilion dv9500", - * DMI_MATCH(DMI_BOARD_NAME, "30CB"), - * .ident = "HP/Compaq Presario C500", - * DMI_MATCH(DMI_BOARD_NAME, "30C6"), - * .ident = "HP/Compaq Presario F500", - * DMI_MATCH(DMI_BOARD_NAME, "30D3"), - * _OSI(Linux) unknown effect: - * .ident = "HP Pavilion dv6500", - * DMI_MATCH(DMI_BOARD_NAME, "30D0"), + * BIOS invocation of _OSI(Linux) is almost always a BIOS bug. + * Linux ignores it, except for the machines enumerated below. */ - { - .callback = dmi_disable_osi_linux, - .ident = "Hewlett-Packard", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - }, - }, + /* * Lenovo has a mix of systems OSI(Linux) situations * and thus we can not wildcard the vendor. @@ -519,113 +235,6 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"), }, }, - { - .callback = dmi_disable_osi_linux, - .ident = "Lenovo 3000 V100", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "LENOVO3000 V100"), - }, - }, - { - .callback = dmi_disable_osi_linux, - .ident = "Lenovo 3000 N100", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "LG Electronics" - * - * _OSI(Linux) confirmed to be a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "P1-J150B"), - * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"), - * - * unknown: - * DMI_MATCH(DMI_PRODUCT_NAME, "S1-MDGDG"), - * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "LG", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"), - }, - }, - /* NEC - OSI(Linux) effect unknown */ - { - .callback = dmi_unknown_osi_linux, - .ident = "NEC VERSA M360", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "NEC Computers SAS"), - DMI_MATCH(DMI_PRODUCT_NAME, "NEC VERSA M360"), - }, - }, - /* Panasonic */ - { - .callback = dmi_unknown_osi_linux, - .ident = "Panasonic", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"), - /* Toughbook CF-52 */ - DMI_MATCH(DMI_PRODUCT_NAME, "CF-52CCABVBG"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "Samsung Electronics" - * - * OSI(Linux) disables PNP0C32 and other BIOS code for Windows: - * DMI_MATCH(DMI_PRODUCT_NAME, "R40P/R41P"), - * DMI_MATCH(DMI_PRODUCT_NAME, "R59P/R60P/R61P"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Samsung", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - }, - }, - /* - * Disable OSI(Linux) warnings on all "Sony Corporation" - * - * _OSI(Linux) is a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NR11S_S"), - * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ38GP_C"), - * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ650N"), - * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-TZ21MN_N"), - * _OSI(Linux) unknown effect: - * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ11M"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Sony", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "TOSHIBA" - * - * _OSI(Linux) breaks sound (bugzilla 7787): - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P100"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P105"), - * _OSI(Linux) is a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A100"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A210"), - * _OSI(Linux) unknown effect: - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A135"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A200"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P205"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U305"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Toshiba", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), - }, - }, {} }; diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index c797c6473f31..7edf6d913c13 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -688,6 +688,14 @@ void __init acpi_early_init(void) if (acpi_disabled) return; + /* + * ACPI CA initializes acpi_dbg_level to non-zero, which means + * we get debug output merely by turning on CONFIG_ACPI_DEBUG. + * Turn it off so we don't get output unless the user specifies + * acpi.debug_level. + */ + acpi_dbg_level = 0; + printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION); /* enable workarounds, unless strict ACPI spec. compliance */ @@ -774,7 +782,7 @@ static int __init acpi_bus_init(void) "Unable to initialize ACPI OS objects\n"); goto error1; } -#ifdef CONFIG_ACPI_EC + /* * ACPI 2.0 requires the EC driver to be loaded and work before * the EC device is found in the namespace (i.e. before acpi_initialize_objects() @@ -785,7 +793,6 @@ static int __init acpi_bus_init(void) */ status = acpi_ec_ecdt_probe(); /* Ignore result. Not having an ECDT is not fatal. */ -#endif status = acpi_initialize_objects(ACPI_FULL_INITIALIZATION); if (ACPI_FAILURE(status)) { diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index cb046c3fc3f2..171fd914f435 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -33,7 +33,6 @@ #include <acpi/acpi_bus.h> #include <acpi/acpi_drivers.h> -#define ACPI_BUTTON_COMPONENT 0x00080000 #define ACPI_BUTTON_CLASS "button" #define ACPI_BUTTON_FILE_INFO "info" #define ACPI_BUTTON_FILE_STATE "state" @@ -479,7 +478,7 @@ static int acpi_button_add(struct acpi_device *device) device->wakeup.gpe_number, ACPI_GPE_TYPE_WAKE_RUN); acpi_enable_gpe(device->wakeup.gpe_device, - device->wakeup.gpe_number, ACPI_NOT_ISR); + device->wakeup.gpe_number); device->wakeup.state.enabled = 1; } diff --git a/drivers/acpi/cm_sbs.c b/drivers/acpi/cm_sbs.c index 4441e84b28a9..307963bd1043 100644 --- a/drivers/acpi/cm_sbs.c +++ b/drivers/acpi/cm_sbs.c @@ -34,7 +34,6 @@ ACPI_MODULE_NAME("cm_sbs"); #define ACPI_AC_CLASS "ac_adapter" #define ACPI_BATTERY_CLASS "battery" -#define ACPI_SBS_COMPONENT 0x00080000 #define _COMPONENT ACPI_SBS_COMPONENT static struct proc_dir_entry *acpi_ac_dir; static struct proc_dir_entry *acpi_battery_dir; @@ -105,9 +104,3 @@ void acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir_param) return; } EXPORT_SYMBOL(acpi_unlock_battery_dir); - -static int __init acpi_cm_sbs_init(void) -{ - return 0; -} -subsys_initcall(acpi_cm_sbs_init); diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c index 134818b265a9..17020c12623c 100644 --- a/drivers/acpi/container.c +++ b/drivers/acpi/container.c @@ -41,7 +41,6 @@ #define INSTALL_NOTIFY_HANDLER 1 #define UNINSTALL_NOTIFY_HANDLER 2 -#define ACPI_CONTAINER_COMPONENT 0x01000000 #define _COMPONENT ACPI_CONTAINER_COMPONENT ACPI_MODULE_NAME("container"); diff --git a/drivers/acpi/debug.c b/drivers/acpi/debug.c index abf36b4b1d1d..c48396892008 100644 --- a/drivers/acpi/debug.c +++ b/drivers/acpi/debug.c @@ -44,6 +44,21 @@ static const struct acpi_dlayer acpi_debug_layers[] = { ACPI_DEBUG_INIT(ACPI_CA_DISASSEMBLER), ACPI_DEBUG_INIT(ACPI_COMPILER), ACPI_DEBUG_INIT(ACPI_TOOLS), + + ACPI_DEBUG_INIT(ACPI_BUS_COMPONENT), + ACPI_DEBUG_INIT(ACPI_AC_COMPONENT), + ACPI_DEBUG_INIT(ACPI_BATTERY_COMPONENT), + ACPI_DEBUG_INIT(ACPI_BUTTON_COMPONENT), + ACPI_DEBUG_INIT(ACPI_SBS_COMPONENT), + ACPI_DEBUG_INIT(ACPI_FAN_COMPONENT), + ACPI_DEBUG_INIT(ACPI_PCI_COMPONENT), + ACPI_DEBUG_INIT(ACPI_POWER_COMPONENT), + ACPI_DEBUG_INIT(ACPI_CONTAINER_COMPONENT), + ACPI_DEBUG_INIT(ACPI_SYSTEM_COMPONENT), + ACPI_DEBUG_INIT(ACPI_THERMAL_COMPONENT), + ACPI_DEBUG_INIT(ACPI_MEMORY_DEVICE_COMPONENT), + ACPI_DEBUG_INIT(ACPI_VIDEO_COMPONENT), + ACPI_DEBUG_INIT(ACPI_PROCESSOR_COMPONENT), }; static const struct acpi_dlevel acpi_debug_levels[] = { diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index ef42316f89f5..30f3ef236ecb 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -70,7 +70,7 @@ enum ec_command { #define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */ #define ACPI_EC_UDELAY 100 /* Wait 100us before polling EC again */ -#define ACPI_EC_STORM_THRESHOLD 20 /* number of false interrupts +#define ACPI_EC_STORM_THRESHOLD 8 /* number of false interrupts per one transaction */ enum { @@ -100,8 +100,11 @@ struct transaction { u8 *rdata; unsigned short irq_count; u8 command; + u8 wi; + u8 ri; u8 wlen; u8 rlen; + bool done; }; static struct acpi_ec { @@ -178,34 +181,46 @@ static int ec_transaction_done(struct acpi_ec *ec) unsigned long flags; int ret = 0; spin_lock_irqsave(&ec->curr_lock, flags); - if (!ec->curr || (!ec->curr->wlen && !ec->curr->rlen)) + if (!ec->curr || ec->curr->done) ret = 1; spin_unlock_irqrestore(&ec->curr_lock, flags); return ret; } +static void start_transaction(struct acpi_ec *ec) +{ + ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0; + ec->curr->done = false; + acpi_ec_write_cmd(ec, ec->curr->command); +} + static void gpe_transaction(struct acpi_ec *ec, u8 status) { unsigned long flags; spin_lock_irqsave(&ec->curr_lock, flags); if (!ec->curr) goto unlock; - if (ec->curr->wlen > 0) { - if ((status & ACPI_EC_FLAG_IBF) == 0) { - acpi_ec_write_data(ec, *(ec->curr->wdata++)); - --ec->curr->wlen; - } else - /* false interrupt, state didn't change */ - ++ec->curr->irq_count; - - } else if (ec->curr->rlen > 0) { + if (ec->curr->wlen > ec->curr->wi) { + if ((status & ACPI_EC_FLAG_IBF) == 0) + acpi_ec_write_data(ec, + ec->curr->wdata[ec->curr->wi++]); + else + goto err; + } else if (ec->curr->rlen > ec->curr->ri) { if ((status & ACPI_EC_FLAG_OBF) == 1) { - *(ec->curr->rdata++) = acpi_ec_read_data(ec); - --ec->curr->rlen; + ec->curr->rdata[ec->curr->ri++] = acpi_ec_read_data(ec); + if (ec->curr->rlen == ec->curr->ri) + ec->curr->done = true; } else - /* false interrupt, state didn't change */ - ++ec->curr->irq_count; - } + goto err; + } else if (ec->curr->wlen == ec->curr->wi && + (status & ACPI_EC_FLAG_IBF) == 0) + ec->curr->done = true; + goto unlock; +err: + /* false interrupt, state didn't change */ + if (in_interrupt()) + ++ec->curr->irq_count; unlock: spin_unlock_irqrestore(&ec->curr_lock, flags); } @@ -215,6 +230,15 @@ static int acpi_ec_wait(struct acpi_ec *ec) if (wait_event_timeout(ec->wait, ec_transaction_done(ec), msecs_to_jiffies(ACPI_EC_DELAY))) return 0; + /* try restart command if we get any false interrupts */ + if (ec->curr->irq_count && + (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) { + pr_debug(PREFIX "controller reset, restart transaction\n"); + start_transaction(ec); + if (wait_event_timeout(ec->wait, ec_transaction_done(ec), + msecs_to_jiffies(ACPI_EC_DELAY))) + return 0; + } /* missing GPEs, switch back to poll mode */ if (printk_ratelimit()) pr_info(PREFIX "missing confirmations, " @@ -239,10 +263,10 @@ static int ec_check_sci(struct acpi_ec *ec, u8 state) static int ec_poll(struct acpi_ec *ec) { unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY); - msleep(1); + udelay(ACPI_EC_UDELAY); while (time_before(jiffies, delay)) { gpe_transaction(ec, acpi_ec_read_status(ec)); - msleep(1); + udelay(ACPI_EC_UDELAY); if (ec_transaction_done(ec)) return 0; } @@ -259,14 +283,13 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, /* disable GPE during transaction if storm is detected */ if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { clear_bit(EC_FLAGS_GPE_MODE, &ec->flags); - acpi_disable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_disable_gpe(NULL, ec->gpe); } /* start transaction */ spin_lock_irqsave(&ec->curr_lock, tmp); /* following two actions should be kept atomic */ - t->irq_count = 0; ec->curr = t; - acpi_ec_write_cmd(ec, ec->curr->command); + start_transaction(ec); if (ec->curr->command == ACPI_EC_COMMAND_QUERY) clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags); spin_unlock_irqrestore(&ec->curr_lock, tmp); @@ -283,10 +306,11 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, /* check if we received SCI during transaction */ ec_check_sci(ec, acpi_ec_read_status(ec)); /* it is safe to enable GPE outside of transaction */ - acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_enable_gpe(NULL, ec->gpe); } else if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags) && t->irq_count > ACPI_EC_STORM_THRESHOLD) { - pr_debug(PREFIX "GPE storm detected\n"); + pr_info(PREFIX "GPE storm detected, " + "transactions will use polling mode\n"); set_bit(EC_FLAGS_GPE_STORM, &ec->flags); } return ret; @@ -558,17 +582,26 @@ static u32 acpi_ec_gpe_handler(void *data) pr_debug(PREFIX "~~~> interrupt\n"); status = acpi_ec_read_status(ec); - gpe_transaction(ec, status); - if (ec_transaction_done(ec) && (status & ACPI_EC_FLAG_IBF) == 0) - wake_up(&ec->wait); + if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) { + gpe_transaction(ec, status); + if (ec_transaction_done(ec) && + (status & ACPI_EC_FLAG_IBF) == 0) + wake_up(&ec->wait); + } ec_check_sci(ec, status); if (!test_bit(EC_FLAGS_GPE_MODE, &ec->flags) && !test_bit(EC_FLAGS_NO_GPE, &ec->flags)) { /* this is non-query, must be confirmation */ - if (printk_ratelimit()) - pr_info(PREFIX "non-query interrupt received," + if (!test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { + if (printk_ratelimit()) + pr_info(PREFIX "non-query interrupt received," + " switching to interrupt mode\n"); + } else { + /* hush, STORM switches the mode every transaction */ + pr_debug(PREFIX "non-query interrupt received," " switching to interrupt mode\n"); + } set_bit(EC_FLAGS_GPE_MODE, &ec->flags); } return ACPI_INTERRUPT_HANDLED; @@ -736,7 +769,7 @@ static acpi_status ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval) { acpi_status status; - unsigned long long tmp; + unsigned long long tmp = 0; struct acpi_ec *ec = context; status = acpi_walk_resources(handle, METHOD_NAME__CRS, @@ -751,6 +784,7 @@ ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval) return status; ec->gpe = tmp; /* Use the global lock for all EC transactions? */ + tmp = 0; acpi_evaluate_integer(handle, "_GLK", NULL, &tmp); ec->global_lock = tmp; ec->handle = handle; @@ -868,7 +902,7 @@ static int ec_install_handlers(struct acpi_ec *ec) if (ACPI_FAILURE(status)) return -ENODEV; acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME); - acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_enable_gpe(NULL, ec->gpe); status = acpi_install_address_space_handler(ec->handle, ACPI_ADR_SPACE_EC, &acpi_ec_space_handler, @@ -1007,7 +1041,7 @@ static int acpi_ec_suspend(struct acpi_device *device, pm_message_t state) /* Stop using GPE */ set_bit(EC_FLAGS_NO_GPE, &ec->flags); clear_bit(EC_FLAGS_GPE_MODE, &ec->flags); - acpi_disable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_disable_gpe(NULL, ec->gpe); return 0; } @@ -1016,7 +1050,7 @@ static int acpi_ec_resume(struct acpi_device *device) struct acpi_ec *ec = acpi_driver_data(device); /* Enable use of GPE back */ clear_bit(EC_FLAGS_NO_GPE, &ec->flags); - acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_enable_gpe(NULL, ec->gpe); return 0; } diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c index c5e53aae86f7..f45c74fe745e 100644 --- a/drivers/acpi/events/evgpe.c +++ b/drivers/acpi/events/evgpe.c @@ -289,8 +289,6 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) */ status = acpi_hw_low_disable_gpe(gpe_event_info); return_ACPI_STATUS(status); - - return_ACPI_STATUS(AE_OK); } /******************************************************************************* diff --git a/drivers/acpi/events/evxfevnt.c b/drivers/acpi/events/evxfevnt.c index 73bfd6bf962f..41554f736b68 100644 --- a/drivers/acpi/events/evxfevnt.c +++ b/drivers/acpi/events/evxfevnt.c @@ -248,21 +248,15 @@ ACPI_EXPORT_SYMBOL(acpi_set_gpe_type) * DESCRIPTION: Enable an ACPI event (general purpose) * ******************************************************************************/ -acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) +acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number) { acpi_status status = AE_OK; + acpi_cpu_flags flags; struct acpi_gpe_event_info *gpe_event_info; ACPI_FUNCTION_TRACE(acpi_enable_gpe); - /* Use semaphore lock if not executing at interrupt level */ - - if (flags & ACPI_NOT_ISR) { - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Ensure that we have a valid GPE number */ @@ -277,9 +271,7 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) status = acpi_ev_enable_gpe(gpe_event_info, TRUE); unlock_and_exit: - if (flags & ACPI_NOT_ISR) { - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - } + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return_ACPI_STATUS(status); } @@ -299,22 +291,15 @@ ACPI_EXPORT_SYMBOL(acpi_enable_gpe) * DESCRIPTION: Disable an ACPI event (general purpose) * ******************************************************************************/ -acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) +acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number) { acpi_status status = AE_OK; + acpi_cpu_flags flags; struct acpi_gpe_event_info *gpe_event_info; ACPI_FUNCTION_TRACE(acpi_disable_gpe); - /* Use semaphore lock if not executing at interrupt level */ - - if (flags & ACPI_NOT_ISR) { - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } - + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Ensure that we have a valid GPE number */ gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); @@ -325,10 +310,8 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) status = acpi_ev_disable_gpe(gpe_event_info); - unlock_and_exit: - if (flags & ACPI_NOT_ISR) { - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - } +unlock_and_exit: + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return_ACPI_STATUS(status); } @@ -521,6 +504,9 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status) if (value) *event_status |= ACPI_EVENT_FLAG_SET; + if (acpi_gbl_fixed_event_handlers[event].handler) + *event_status |= ACPI_EVENT_FLAG_HANDLE; + return_ACPI_STATUS(status); } @@ -571,6 +557,9 @@ acpi_get_gpe_status(acpi_handle gpe_device, status = acpi_hw_get_gpe_status(gpe_event_info, event_status); + if (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) + *event_status |= ACPI_EVENT_FLAG_HANDLE; + unlock_and_exit: if (flags & ACPI_NOT_ISR) { (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index 60d54d1f6b19..eaaee1660bdf 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -34,7 +34,6 @@ #include <acpi/acpi_bus.h> #include <acpi/acpi_drivers.h> -#define ACPI_FAN_COMPONENT 0x00200000 #define ACPI_FAN_CLASS "fan" #define ACPI_FAN_FILE_STATE "state" diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 24649ada08df..adec3d15810a 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -140,6 +140,46 @@ struct device *acpi_get_physical_device(acpi_handle handle) EXPORT_SYMBOL(acpi_get_physical_device); +/* ToDo: When a PCI bridge is found, return the PCI device behind the bridge + * This should work in general, but did not on a Lenovo T61 for the + * graphics card. But this must be fixed when the PCI device is + * bound and the kernel device struct is attached to the acpi device + * Note: A success call will increase reference count by one + * Do call put_device(dev) on the returned device then + */ +struct device *acpi_get_physical_pci_device(acpi_handle handle) +{ + struct device *dev; + long long device_id; + acpi_status status; + + status = + acpi_evaluate_integer(handle, "_ADR", NULL, &device_id); + + if (ACPI_FAILURE(status)) + return NULL; + + /* We need to attempt to determine whether the _ADR refers to a + PCI device or not. There's no terribly good way to do this, + so the best we can hope for is to assume that there'll never + be a device in the host bridge */ + if (device_id >= 0x10000) { + /* It looks like a PCI device. Does it exist? */ + dev = acpi_get_physical_device(handle); + } else { + /* It doesn't look like a PCI device. Does its parent + exist? */ + acpi_handle phandle; + if (acpi_get_parent(handle, &phandle)) + return NULL; + dev = acpi_get_physical_device(phandle); + } + if (!dev) + return NULL; + return dev; +} +EXPORT_SYMBOL(acpi_get_physical_pci_device); + static int acpi_bind_one(struct device *dev, acpi_handle handle) { struct acpi_device *acpi_dev; diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 4be252145cb4..c8111424dcb8 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -35,7 +35,6 @@ #include <linux/interrupt.h> #include <linux/kmod.h> #include <linux/delay.h> -#include <linux/dmi.h> #include <linux/workqueue.h> #include <linux/nmi.h> #include <linux/acpi.h> @@ -97,54 +96,44 @@ static DEFINE_SPINLOCK(acpi_res_lock); static char osi_additional_string[OSI_STRING_LENGTH_MAX]; /* - * "Ode to _OSI(Linux)" + * The story of _OSI(Linux) * - * osi_linux -- Control response to BIOS _OSI(Linux) query. + * From pre-history through Linux-2.6.22, + * Linux responded TRUE upon a BIOS OSI(Linux) query. * - * As Linux evolves, the features that it supports change. - * So an OSI string such as "Linux" is not specific enough - * to be useful across multiple versions of Linux. It - * doesn't identify any particular feature, interface, - * or even any particular version of Linux... + * Unfortunately, reference BIOS writers got wind of this + * and put OSI(Linux) in their example code, quickly exposing + * this string as ill-conceived and opening the door to + * an un-bounded number of BIOS incompatibilities. * - * Unfortunately, Linux-2.6.22 and earlier responded "yes" - * to a BIOS _OSI(Linux) query. When - * a reference mobile BIOS started using it, its use - * started to spread to many vendor platforms. - * As it is not supportable, we need to halt that spread. + * For example, OSI(Linux) was used on resume to re-POST a + * video card on one system, because Linux at that time + * could not do a speedy restore in its native driver. + * But then upon gaining quick native restore capability, + * Linux has no way to tell the BIOS to skip the time-consuming + * POST -- putting Linux at a permanent performance disadvantage. + * On another system, the BIOS writer used OSI(Linux) + * to infer native OS support for IPMI! On other systems, + * OSI(Linux) simply got in the way of Linux claiming to + * be compatible with other operating systems, exposing + * BIOS issues such as skipped device initialization. * - * Today, most BIOS references to _OSI(Linux) are noise -- - * they have no functional effect and are just dead code - * carried over from the reference BIOS. - * - * The next most common case is that _OSI(Linux) harms Linux, - * usually by causing the BIOS to follow paths that are - * not tested during Windows validation. - * - * Finally, there is a short list of platforms - * where OSI(Linux) benefits Linux. - * - * In Linux-2.6.23, OSI(Linux) is first disabled by default. - * DMI is used to disable the dmesg warning about OSI(Linux) - * on platforms where it is known to have no effect. - * But a dmesg warning remains for systems where - * we do not know if OSI(Linux) is good or bad for the system. - * DMI is also used to enable OSI(Linux) for the machines - * that are known to need it. + * So "Linux" turned out to be a really poor chose of + * OSI string, and from Linux-2.6.23 onward we respond FALSE. * * BIOS writers should NOT query _OSI(Linux) on future systems. - * It will be ignored by default, and to get Linux to - * not ignore it will require a kernel source update to - * add a DMI entry, or a boot-time "acpi_osi=Linux" invocation. + * Linux will complain on the console when it sees it, and return FALSE. + * To get Linux to return TRUE for your system will require + * a kernel source update to add a DMI entry, + * or boot with "acpi_osi=Linux" */ -#define OSI_LINUX_ENABLE 0 static struct osi_linux { unsigned int enable:1; unsigned int dmi:1; unsigned int cmdline:1; unsigned int known:1; -} osi_linux = { OSI_LINUX_ENABLE, 0, 0, 0}; +} osi_linux = { 0, 0, 0, 0}; static void __init acpi_request_region (struct acpi_generic_address *addr, unsigned int length, char *desc) @@ -1296,34 +1285,6 @@ acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object) return (AE_OK); } -/** - * acpi_dmi_dump - dump DMI slots needed for blacklist entry - * - * Returns 0 on success - */ -static int acpi_dmi_dump(void) -{ - - if (!dmi_available) - return -1; - - printk(KERN_NOTICE PREFIX "DMI System Vendor: %s\n", - dmi_get_system_info(DMI_SYS_VENDOR)); - printk(KERN_NOTICE PREFIX "DMI Product Name: %s\n", - dmi_get_system_info(DMI_PRODUCT_NAME)); - printk(KERN_NOTICE PREFIX "DMI Product Version: %s\n", - dmi_get_system_info(DMI_PRODUCT_VERSION)); - printk(KERN_NOTICE PREFIX "DMI Board Name: %s\n", - dmi_get_system_info(DMI_BOARD_NAME)); - printk(KERN_NOTICE PREFIX "DMI BIOS Vendor: %s\n", - dmi_get_system_info(DMI_BIOS_VENDOR)); - printk(KERN_NOTICE PREFIX "DMI BIOS Date: %s\n", - dmi_get_system_info(DMI_BIOS_DATE)); - - return 0; -} - - /****************************************************************************** * * FUNCTION: acpi_os_validate_interface @@ -1350,21 +1311,6 @@ acpi_os_validate_interface (char *interface) osi_linux.cmdline ? " via cmdline" : osi_linux.dmi ? " via DMI" : ""); - if (!osi_linux.dmi) { - if (acpi_dmi_dump()) - printk(KERN_NOTICE PREFIX - "[please extract dmidecode output]\n"); - printk(KERN_NOTICE PREFIX - "Please send DMI info above to " - "linux-acpi@vger.kernel.org\n"); - } - if (!osi_linux.known && !osi_linux.cmdline) { - printk(KERN_NOTICE PREFIX - "If \"acpi_osi=%sLinux\" works better, " - "please notify linux-acpi@vger.kernel.org\n", - osi_linux.enable ? "!" : ""); - } - if (osi_linux.enable) return AE_OK; } diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c index 11acaee14d66..bf79d83bdfbb 100644 --- a/drivers/acpi/pci_irq.c +++ b/drivers/acpi/pci_irq.c @@ -384,6 +384,27 @@ acpi_pci_free_irq(struct acpi_prt_entry *entry, return irq; } +#ifdef CONFIG_X86_IO_APIC +extern int noioapicquirk; + +static int bridge_has_boot_interrupt_variant(struct pci_bus *bus) +{ + struct pci_bus *bus_it; + + for (bus_it = bus ; bus_it ; bus_it = bus_it->parent) { + if (!bus_it->self) + return 0; + + printk(KERN_INFO "vendor=%04x device=%04x\n", bus_it->self->vendor, + bus_it->self->device); + + if (bus_it->self->irq_reroute_variant) + return bus_it->self->irq_reroute_variant; + } + return 0; +} +#endif /* CONFIG_X86_IO_APIC */ + /* * acpi_pci_irq_lookup * success: return IRQ >= 0 @@ -413,6 +434,41 @@ acpi_pci_irq_lookup(struct pci_bus *bus, } ret = func(entry, triggering, polarity, link); + +#ifdef CONFIG_X86_IO_APIC + /* + * Some chipsets (e.g. intel 6700PXH) generate a legacy INTx when the + * IRQ entry in the chipset's IO-APIC is masked (as, e.g. the RT kernel + * does during interrupt handling). When this INTx generation cannot be + * disabled, we reroute these interrupts to their legacy equivalent to + * get rid of spurious interrupts. + */ + if (!noioapicquirk) { + switch (bridge_has_boot_interrupt_variant(bus)) { + case 0: + /* no rerouting necessary */ + break; + + case INTEL_IRQ_REROUTE_VARIANT: + /* + * Remap according to INTx routing table in 6700PXH + * specs, intel order number 302628-002, section + * 2.15.2. Other chipsets (80332, ...) have the same + * mapping and are handled here as well. + */ + printk(KERN_INFO "pci irq %d -> rerouted to legacy " + "irq %d\n", ret, (ret % 4) + 16); + ret = (ret % 4) + 16; + break; + + default: + printk(KERN_INFO "not rerouting irq %d to legacy irq: " + "unknown mapping\n", ret); + break; + } + } +#endif /* CONFIG_X86_IO_APIC */ + return ret; } diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index fcfdef7b4fdd..e52ad91ce2dc 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -531,7 +531,7 @@ int __init acpi_irq_penalty_init(void) return 0; } -static int acpi_irq_balance; /* 0: static, 1: balance */ +static int acpi_irq_balance = -1; /* 0: static, 1: balance */ static int acpi_pci_link_allocate(struct acpi_pci_link *link) { @@ -950,10 +950,17 @@ device_initcall(irqrouter_init_sysfs); static int __init acpi_pci_link_init(void) { - if (acpi_noirq) return 0; + if (acpi_irq_balance == -1) { + /* no command line switch: enable balancing in IOAPIC mode */ + if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) + acpi_irq_balance = 1; + else + acpi_irq_balance = 0; + } + acpi_link.count = 0; INIT_LIST_HEAD(&acpi_link.entries); diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 1b8f67d21d53..642554b1b60c 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -376,15 +376,9 @@ static int acpi_pci_root_remove(struct acpi_device *device, int type) static int __init acpi_pci_root_init(void) { - if (acpi_pci_disabled) return 0; - /* DEBUG: - acpi_dbg_layer = ACPI_PCI_COMPONENT; - acpi_dbg_level = 0xFFFFFFFF; - */ - if (acpi_bus_register_driver(&acpi_pci_root_driver) < 0) return -ENODEV; diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index a1718e56103b..bb7d50dd2818 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -44,9 +44,8 @@ #include <acpi/acpi_bus.h> #include <acpi/acpi_drivers.h> -#define _COMPONENT ACPI_POWER_COMPONENT +#define _COMPONENT ACPI_POWER_COMPONENT ACPI_MODULE_NAME("power"); -#define ACPI_POWER_COMPONENT 0x00800000 #define ACPI_POWER_CLASS "power_resource" #define ACPI_POWER_DEVICE_NAME "Power Resource" #define ACPI_POWER_FILE_INFO "info" @@ -153,7 +152,8 @@ static int acpi_power_get_state(acpi_handle handle, int *state) ACPI_POWER_RESOURCE_STATE_OFF; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] is %s\n", - acpi_ut_get_node_name(handle), state ? "on" : "off")); + acpi_ut_get_node_name(handle), + *state ? "on" : "off")); return 0; } @@ -516,11 +516,6 @@ int acpi_power_transition(struct acpi_device *device, int state) cl = &device->power.states[device->power.state].resources; tl = &device->power.states[state].resources; - if (!cl->count && !tl->count) { - result = -ENODEV; - goto end; - } - /* TBD: Resources must be ordered. */ /* diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 24a362f8034c..34948362f41d 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -59,7 +59,6 @@ #include <acpi/acpi_drivers.h> #include <acpi/processor.h> -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define ACPI_PROCESSOR_DEVICE_NAME "Processor" #define ACPI_PROCESSOR_FILE_INFO "info" @@ -89,6 +88,7 @@ static int acpi_processor_handle_eject(struct acpi_processor *pr); static const struct acpi_device_id processor_device_ids[] = { + {ACPI_PROCESSOR_OBJECT_HID, 0}, {ACPI_PROCESSOR_HID, 0}, {"", 0}, }; @@ -409,7 +409,7 @@ static int acpi_processor_remove_fs(struct acpi_device *device) /* Use the acpiid in MADT to map cpus in case of SMP */ #ifndef CONFIG_SMP -static int get_cpu_id(acpi_handle handle, u32 acpi_id) {return -1;} +static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id) { return -1; } #else static struct acpi_table_madt *madt; @@ -428,27 +428,35 @@ static int map_lapic_id(struct acpi_subtable_header *entry, } static int map_lsapic_id(struct acpi_subtable_header *entry, - u32 acpi_id, int *apic_id) + int device_declaration, u32 acpi_id, int *apic_id) { struct acpi_madt_local_sapic *lsapic = (struct acpi_madt_local_sapic *)entry; + u32 tmp = (lsapic->id << 8) | lsapic->eid; + /* Only check enabled APICs*/ - if (lsapic->lapic_flags & ACPI_MADT_ENABLED) { - /* First check against id */ - if (lsapic->processor_id == acpi_id) { - *apic_id = (lsapic->id << 8) | lsapic->eid; - return 1; - /* Check against optional uid */ - } else if (entry->length >= 16 && - lsapic->uid == acpi_id) { - *apic_id = lsapic->uid; - return 1; - } - } + if (!(lsapic->lapic_flags & ACPI_MADT_ENABLED)) + return 0; + + /* Device statement declaration type */ + if (device_declaration) { + if (entry->length < 16) + printk(KERN_ERR PREFIX + "Invalid LSAPIC with Device type processor (SAPIC ID %#x)\n", + tmp); + else if (lsapic->uid == acpi_id) + goto found; + /* Processor statement declaration type */ + } else if (lsapic->processor_id == acpi_id) + goto found; + return 0; +found: + *apic_id = tmp; + return 1; } -static int map_madt_entry(u32 acpi_id) +static int map_madt_entry(int type, u32 acpi_id) { unsigned long madt_end, entry; int apic_id = -1; @@ -469,7 +477,7 @@ static int map_madt_entry(u32 acpi_id) if (map_lapic_id(header, acpi_id, &apic_id)) break; } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) { - if (map_lsapic_id(header, acpi_id, &apic_id)) + if (map_lsapic_id(header, type, acpi_id, &apic_id)) break; } entry += header->length; @@ -477,7 +485,7 @@ static int map_madt_entry(u32 acpi_id) return apic_id; } -static int map_mat_entry(acpi_handle handle, u32 acpi_id) +static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; @@ -500,7 +508,7 @@ static int map_mat_entry(acpi_handle handle, u32 acpi_id) if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) { map_lapic_id(header, acpi_id, &apic_id); } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) { - map_lsapic_id(header, acpi_id, &apic_id); + map_lsapic_id(header, type, acpi_id, &apic_id); } exit: @@ -509,14 +517,14 @@ exit: return apic_id; } -static int get_cpu_id(acpi_handle handle, u32 acpi_id) +static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id) { int i; int apic_id = -1; - apic_id = map_mat_entry(handle, acpi_id); + apic_id = map_mat_entry(handle, type, acpi_id); if (apic_id == -1) - apic_id = map_madt_entry(acpi_id); + apic_id = map_madt_entry(type, acpi_id); if (apic_id == -1) return apic_id; @@ -532,15 +540,16 @@ static int get_cpu_id(acpi_handle handle, u32 acpi_id) Driver Interface -------------------------------------------------------------------------- */ -static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid) +static int acpi_processor_get_info(struct acpi_device *device) { acpi_status status = 0; union acpi_object object = { 0 }; struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; - int cpu_index; + struct acpi_processor *pr; + int cpu_index, device_declaration = 0; static int cpu0_initialized; - + pr = acpi_driver_data(device); if (!pr) return -EINVAL; @@ -561,22 +570,23 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No bus mastering arbitration control\n")); - /* Check if it is a Device with HID and UID */ - if (has_uid) { + if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_HID)) { + /* + * Declared with "Device" statement; match _UID. + * Note that we don't handle string _UIDs yet. + */ unsigned long long value; status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID, NULL, &value); if (ACPI_FAILURE(status)) { - printk(KERN_ERR PREFIX "Evaluating processor _UID\n"); + printk(KERN_ERR PREFIX + "Evaluating processor _UID [%#x]\n", status); return -ENODEV; } + device_declaration = 1; pr->acpi_id = value; } else { - /* - * Evalute the processor object. Note that it is common on SMP to - * have the first (boot) processor with a valid PBLK address while - * all others have a NULL address. - */ + /* Declared with "Processor" statement; match ProcessorID */ status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer); if (ACPI_FAILURE(status)) { printk(KERN_ERR PREFIX "Evaluating processor object\n"); @@ -584,12 +594,13 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid) } /* - * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. - * >>> 'acpi_get_processor_id(acpi_id, &id)' in arch/xxx/acpi.c - */ + * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. + * >>> 'acpi_get_processor_id(acpi_id, &id)' in + * arch/xxx/acpi.c + */ pr->acpi_id = object.processor.proc_id; } - cpu_index = get_cpu_id(pr->handle, pr->acpi_id); + cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id); /* Handle UP system running SMP kernel, with no LAPIC in MADT */ if (!cpu0_initialized && (cpu_index == -1) && @@ -661,7 +672,7 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device) pr = acpi_driver_data(device); - result = acpi_processor_get_info(pr, device->flags.unique_id); + result = acpi_processor_get_info(device); if (result) { /* Processor is physically not present */ return 0; @@ -761,20 +772,20 @@ static void acpi_processor_notify(acpi_handle handle, u32 event, void *data) acpi_bus_generate_proc_event(device, event, pr->performance_platform_limit); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, + dev_name(&device->dev), event, pr->performance_platform_limit); break; case ACPI_PROCESSOR_NOTIFY_POWER: acpi_processor_cst_has_changed(pr); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); break; case ACPI_PROCESSOR_NOTIFY_THROTTLING: acpi_processor_tstate_has_changed(pr); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unsupported event [0x%x]\n", event)); diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 81b40ed5379e..5f8d746a9b81 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -59,7 +59,6 @@ #include <acpi/processor.h> #include <asm/processor.h> -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_idle"); diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index dbcf260ea93f..0d7b772bef50 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -44,9 +44,9 @@ #endif #include <acpi/acpi_bus.h> +#include <acpi/acpi_drivers.h> #include <acpi/processor.h> -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define ACPI_PROCESSOR_FILE_PERFORMANCE "performance" #define _COMPONENT ACPI_PROCESSOR_COMPONENT diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index ef34b18f95ca..b1eb376fae45 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -40,7 +40,6 @@ #include <acpi/processor.h> #include <acpi/acpi_drivers.h> -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_thermal"); diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 3da2df93d924..a0c38c94a8a0 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -38,9 +38,9 @@ #include <asm/uaccess.h> #include <acpi/acpi_bus.h> +#include <acpi/acpi_drivers.h> #include <acpi/processor.h> -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_throttling"); diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c index 755baf2ca70a..a6b662c00b67 100644 --- a/drivers/acpi/reboot.c +++ b/drivers/acpi/reboot.c @@ -15,28 +15,9 @@ void acpi_reboot(void) rr = &acpi_gbl_FADT.reset_register; - /* - * Is the ACPI reset register supported? - * - * According to ACPI 3.0, FADT.flags.RESET_REG_SUP indicates - * whether the ACPI reset mechanism is supported. - * - * However, some boxes have this bit clear, yet a valid - * ACPI_RESET_REG & RESET_VALUE, and ACPI reboot is the only - * mechanism that works for them after S3. - * - * This suggests that other operating systems may not be checking - * the RESET_REG_SUP bit, and are using other means to decide - * whether to use the ACPI reboot mechanism or not. - * - * So when acpi reboot is requested, - * only the reset_register is checked. If the following - * conditions are met, it indicates that the reset register is supported. - * a. reset_register is not zero - * b. the access width is eight - * c. the bit_offset is zero - */ - if (!(rr->address) || rr->bit_width != 8 || rr->bit_offset != 0) + /* Is the reset register supported? */ + if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) || + rr->bit_width != 8 || rr->bit_offset != 0) return; reset_value = acpi_gbl_FADT.reset_value; diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index a9dda8e0f9f9..39b7233c3485 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -109,8 +109,7 @@ static int acpi_bus_hot_remove_device(void *context) return 0; ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Hot-removing device %s...\n", device->dev.bus_id)); - + "Hot-removing device %s...\n", dev_name(&device->dev))); if (acpi_bus_trim(device, 1)) { printk(KERN_ERR PREFIX @@ -460,7 +459,7 @@ static int acpi_device_register(struct acpi_device *device, acpi_device_bus_id->instance_no = 0; list_add_tail(&acpi_device_bus_id->node, &acpi_bus_id_list); } - sprintf(device->dev.bus_id, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no); + dev_set_name(&device->dev, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no); if (device->parent) { list_add_tail(&device->node, &device->parent->children); @@ -484,7 +483,8 @@ static int acpi_device_register(struct acpi_device *device, result = acpi_device_setup_files(device); if(result) - printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n", device->dev.bus_id); + printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n", + dev_name(&device->dev)); device->removal_type = ACPI_BUS_REMOVAL_NORMAL; return 0; @@ -751,16 +751,6 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device) if (!acpi_match_device_ids(device, button_device_ids)) device->wakeup.flags.run_wake = 1; - /* - * Don't set Power button GPE as run_wake - * if Fixed Power button is used - */ - if (!strcmp(device->pnp.hardware_id, "PNP0C0C") && - !(acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON)) { - device->wakeup.flags.run_wake = 0; - device->wakeup.flags.valid = 0; - } - end: if (ACPI_FAILURE(status)) device->flags.wake_capable = 0; @@ -919,36 +909,6 @@ static void acpi_device_get_busid(struct acpi_device *device, } } -static int -acpi_video_bus_match(struct acpi_device *device) -{ - acpi_handle h_dummy; - - if (!device) - return -EINVAL; - - /* Since there is no HID, CID for ACPI Video drivers, we have - * to check well known required nodes for each feature we support. - */ - - /* Does this device able to support video switching ? */ - if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) && - ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy))) - return 0; - - /* Does this device able to retrieve a video ROM ? */ - if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy))) - return 0; - - /* Does this device able to configure which video head to be POSTed ? */ - if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy)) && - ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy)) && - ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy))) - return 0; - - return -ENODEV; -} - /* * acpi_bay_match - see if a device is an ejectable driver bay * @@ -1031,7 +991,7 @@ static void acpi_device_set_id(struct acpi_device *device, will get autoloaded and the device might still match against another driver. */ - if (ACPI_SUCCESS(acpi_video_bus_match(device))) + if (acpi_is_video_device(device)) cid_add = ACPI_VIDEO_HID; else if (ACPI_SUCCESS(acpi_bay_match(device))) cid_add = ACPI_BAY_HID; @@ -1043,7 +1003,7 @@ static void acpi_device_set_id(struct acpi_device *device, hid = ACPI_POWER_HID; break; case ACPI_BUS_TYPE_PROCESSOR: - hid = ACPI_PROCESSOR_HID; + hid = ACPI_PROCESSOR_OBJECT_HID; break; case ACPI_BUS_TYPE_SYSTEM: hid = ACPI_SYSTEM_HID; diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 80c0868d0480..28a691cc625e 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -90,6 +90,18 @@ void __init acpi_old_suspend_ordering(void) old_suspend_ordering = true; } +/* + * According to the ACPI specification the BIOS should make sure that ACPI is + * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still, + * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI + * on such systems during resume. Unfortunately that doesn't help in + * particularly pathological cases in which SCI_EN has to be set directly on + * resume, although the specification states very clearly that this flag is + * owned by the hardware. The set_sci_en_on_resume variable will be set in such + * cases. + */ +static bool set_sci_en_on_resume; + /** * acpi_pm_disable_gpes - Disable the GPEs. */ @@ -235,7 +247,11 @@ static int acpi_suspend_enter(suspend_state_t pm_state) } /* If ACPI is not enabled by the BIOS, we need to enable it here. */ - acpi_enable(); + if (set_sci_en_on_resume) + acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1); + else + acpi_enable(); + /* Reprogram control registers and execute _BFS */ acpi_leave_sleep_state_prep(acpi_state); @@ -323,6 +339,12 @@ static int __init init_old_suspend_ordering(const struct dmi_system_id *d) return 0; } +static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d) +{ + set_sci_en_on_resume = true; + return 0; +} + static struct dmi_system_id __initdata acpisleep_dmi_table[] = { { .callback = init_old_suspend_ordering, @@ -340,6 +362,22 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"), }, }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Apple MacBook 1,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Apple MacMini 1,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"), + }, + }, {}, }; #endif /* CONFIG_SUSPEND */ diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 631ee2ee2ca0..4dbc2271acf5 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -367,7 +367,7 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) if (ldev) seq_printf(seq, "%s:%s", ldev->bus ? ldev->bus->name : "no-bus", - ldev->bus_id); + dev_name(ldev)); seq_printf(seq, "\n"); put_device(ldev); diff --git a/drivers/acpi/sleep/wakeup.c b/drivers/acpi/sleep/wakeup.c index 38655eb132dc..dea4c23df764 100644 --- a/drivers/acpi/sleep/wakeup.c +++ b/drivers/acpi/sleep/wakeup.c @@ -88,7 +88,7 @@ void acpi_enable_wakeup_device(u8 sleep_state) spin_unlock(&acpi_device_lock); if (!dev->wakeup.flags.run_wake) acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_ISR); + dev->wakeup.gpe_number); spin_lock(&acpi_device_lock); } spin_unlock(&acpi_device_lock); @@ -122,7 +122,7 @@ void acpi_disable_wakeup_device(u8 sleep_state) ACPI_GPE_TYPE_WAKE_RUN); /* Re-enable it, since set_gpe_type will disable it */ acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_NOT_ISR); + dev->wakeup.gpe_number); spin_lock(&acpi_device_lock); } continue; @@ -133,7 +133,7 @@ void acpi_disable_wakeup_device(u8 sleep_state) /* Never disable run-wake GPE */ if (!dev->wakeup.flags.run_wake) { acpi_disable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_NOT_ISR); + dev->wakeup.gpe_number); acpi_clear_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number, ACPI_NOT_ISR); } @@ -162,7 +162,7 @@ static int __init acpi_wakeup_device_init(void) dev->wakeup.gpe_number, ACPI_GPE_TYPE_WAKE_RUN); acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_NOT_ISR); + dev->wakeup.gpe_number); dev->wakeup.state.enabled = 1; spin_lock(&acpi_device_lock); } diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index 1d74171b7940..6e4107f82403 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -78,9 +78,15 @@ static ssize_t acpi_table_show(struct kobject *kobj, container_of(bin_attr, struct acpi_table_attr, attr); struct acpi_table_header *table_header = NULL; acpi_status status; + char name[ACPI_NAME_SIZE]; + + if (strncmp(table_attr->name, "NULL", 4)) + memcpy(name, table_attr->name, ACPI_NAME_SIZE); + else + memcpy(name, "\0\0\0\0", 4); status = - acpi_get_table(table_attr->name, table_attr->instance, + acpi_get_table(name, table_attr->instance, &table_header); if (ACPI_FAILURE(status)) return -ENODEV; @@ -95,21 +101,24 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr, struct acpi_table_header *header = NULL; struct acpi_table_attr *attr = NULL; - memcpy(table_attr->name, table_header->signature, ACPI_NAME_SIZE); + if (table_header->signature[0] != '\0') + memcpy(table_attr->name, table_header->signature, + ACPI_NAME_SIZE); + else + memcpy(table_attr->name, "NULL", 4); list_for_each_entry(attr, &acpi_table_attr_list, node) { - if (!memcmp(table_header->signature, attr->name, - ACPI_NAME_SIZE)) + if (!memcmp(table_attr->name, attr->name, ACPI_NAME_SIZE)) if (table_attr->instance < attr->instance) table_attr->instance = attr->instance; } table_attr->instance++; if (table_attr->instance > 1 || (table_attr->instance == 1 && - !acpi_get_table(table_header-> - signature, 2, - &header))) - sprintf(table_attr->name + 4, "%d", table_attr->instance); + !acpi_get_table + (table_header->signature, 2, &header))) + sprintf(table_attr->name + ACPI_NAME_SIZE, "%d", + table_attr->instance); table_attr->attr.size = 0; table_attr->attr.read = acpi_table_show; @@ -167,7 +176,6 @@ static int acpi_system_sysfs_init(void) #define COUNT_ERROR 2 /* other */ #define NUM_COUNTERS_EXTRA 3 -#define ACPI_EVENT_VALID 0x01 struct event_counter { u32 count; u32 flags; @@ -312,12 +320,6 @@ static int get_status(u32 index, acpi_event_status *status, acpi_handle *handle) } else if (index < (num_gpes + ACPI_NUM_FIXED_EVENTS)) result = acpi_get_event_status(index - num_gpes, status); - /* - * sleep/power button GPE/Fixed Event is enabled after acpi_system_init, - * check the status at runtime and mark it as valid once it's enabled - */ - if (!result && (*status & ACPI_EVENT_FLAG_ENABLED)) - all_counters[index].flags |= ACPI_EVENT_VALID; end: return result; } @@ -346,12 +348,14 @@ static ssize_t counter_show(struct kobject *kobj, if (result) goto end; - if (!(all_counters[index].flags & ACPI_EVENT_VALID)) - size += sprintf(buf + size, " invalid"); + if (!(status & ACPI_EVENT_FLAG_HANDLE)) + size += sprintf(buf + size, " invalid"); else if (status & ACPI_EVENT_FLAG_ENABLED) - size += sprintf(buf + size, " enable"); + size += sprintf(buf + size, " enabled"); + else if (status & ACPI_EVENT_FLAG_WAKE_ENABLED) + size += sprintf(buf + size, " wake_enabled"); else - size += sprintf(buf + size, " disable"); + size += sprintf(buf + size, " disabled"); end: size += sprintf(buf + size, "\n"); @@ -385,7 +389,7 @@ static ssize_t counter_set(struct kobject *kobj, if (result) goto end; - if (!(all_counters[index].flags & ACPI_EVENT_VALID)) { + if (!(status & ACPI_EVENT_FLAG_HANDLE)) { printk(KERN_WARNING PREFIX "Can not change Invalid GPE/Fixed Event status\n"); return -EINVAL; @@ -394,10 +398,10 @@ static ssize_t counter_set(struct kobject *kobj, if (index < num_gpes) { if (!strcmp(buf, "disable\n") && (status & ACPI_EVENT_FLAG_ENABLED)) - result = acpi_disable_gpe(handle, index, ACPI_NOT_ISR); + result = acpi_disable_gpe(handle, index); else if (!strcmp(buf, "enable\n") && !(status & ACPI_EVENT_FLAG_ENABLED)) - result = acpi_enable_gpe(handle, index, ACPI_NOT_ISR); + result = acpi_enable_gpe(handle, index); else if (!strcmp(buf, "clear\n") && (status & ACPI_EVENT_FLAG_SET)) result = acpi_clear_gpe(handle, index, ACPI_NOT_ISR); diff --git a/drivers/acpi/tables/tbfadt.c b/drivers/acpi/tables/tbfadt.c index 2c7885e7ffba..2817158fb6a1 100644 --- a/drivers/acpi/tables/tbfadt.c +++ b/drivers/acpi/tables/tbfadt.c @@ -304,7 +304,7 @@ static void acpi_tb_convert_fadt(void) * The ACPI 1.0 reserved fields that will be zeroed are the bytes located at * offset 45, 55, 95, and the word located at offset 109, 110. */ - if (acpi_gbl_FADT.header.revision < 3) { + if (acpi_gbl_FADT.header.revision < FADT2_REVISION_ID) { acpi_gbl_FADT.preferred_profile = 0; acpi_gbl_FADT.pstate_control = 0; acpi_gbl_FADT.cst_control = 0; diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index ad6cae938f0b..073ff09218a9 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -47,7 +47,6 @@ #include <acpi/acpi_bus.h> #include <acpi/acpi_drivers.h> -#define ACPI_THERMAL_COMPONENT 0x04000000 #define ACPI_THERMAL_CLASS "thermal_zone" #define ACPI_THERMAL_DEVICE_NAME "Thermal Zone" #define ACPI_THERMAL_FILE_STATE "state" @@ -576,7 +575,7 @@ static int acpi_thermal_critical(struct acpi_thermal *tz) acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL, tz->trips.critical.flags.enabled); acpi_bus_generate_netlink_event(tz->device->pnp.device_class, - tz->device->dev.bus_id, + dev_name(&tz->device->dev), ACPI_THERMAL_NOTIFY_CRITICAL, tz->trips.critical.flags.enabled); @@ -605,7 +604,7 @@ static int acpi_thermal_hot(struct acpi_thermal *tz) acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_HOT, tz->trips.hot.flags.enabled); acpi_bus_generate_netlink_event(tz->device->pnp.device_class, - tz->device->dev.bus_id, + dev_name(&tz->device->dev), ACPI_THERMAL_NOTIFY_HOT, tz->trips.hot.flags.enabled); @@ -1592,14 +1591,14 @@ static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data) acpi_thermal_check(tz); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); break; case ACPI_THERMAL_NOTIFY_DEVICES: acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES); acpi_thermal_check(tz); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); break; default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c index 66aac06f2ac5..40e60fc2e596 100644 --- a/drivers/acpi/toshiba_acpi.c +++ b/drivers/acpi/toshiba_acpi.c @@ -824,34 +824,36 @@ static int __init toshiba_acpi_init(void) toshiba_acpi_exit(); return -ENOMEM; } - } - /* Register input device for kill switch */ - toshiba_acpi.poll_dev = input_allocate_polled_device(); - if (!toshiba_acpi.poll_dev) { - printk(MY_ERR "unable to allocate kill-switch input device\n"); - toshiba_acpi_exit(); - return -ENOMEM; - } - toshiba_acpi.poll_dev->private = &toshiba_acpi; - toshiba_acpi.poll_dev->poll = bt_poll_rfkill; - toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */ - - toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name; - toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST; - toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */ - set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit); - set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit); - input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE); - input_sync(toshiba_acpi.poll_dev->input); - - ret = input_register_polled_device(toshiba_acpi.poll_dev); - if (ret) { - printk(MY_ERR "unable to register kill-switch input device\n"); - rfkill_free(toshiba_acpi.rfk_dev); - toshiba_acpi.rfk_dev = NULL; - toshiba_acpi_exit(); - return ret; + /* Register input device for kill switch */ + toshiba_acpi.poll_dev = input_allocate_polled_device(); + if (!toshiba_acpi.poll_dev) { + printk(MY_ERR + "unable to allocate kill-switch input device\n"); + toshiba_acpi_exit(); + return -ENOMEM; + } + toshiba_acpi.poll_dev->private = &toshiba_acpi; + toshiba_acpi.poll_dev->poll = bt_poll_rfkill; + toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */ + + toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name; + toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST; + /* Toshiba USB ID */ + toshiba_acpi.poll_dev->input->id.vendor = 0x0930; + set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit); + set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit); + input_report_switch(toshiba_acpi.poll_dev->input, + SW_RFKILL_ALL, TRUE); + input_sync(toshiba_acpi.poll_dev->input); + + ret = input_register_polled_device(toshiba_acpi.poll_dev); + if (ret) { + printk(MY_ERR + "unable to register kill-switch input device\n"); + toshiba_acpi_exit(); + return ret; + } } return 0; diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index e827be36ee8d..f844941089bb 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -259,34 +259,26 @@ acpi_evaluate_integer(acpi_handle handle, struct acpi_object_list *arguments, unsigned long long *data) { acpi_status status = AE_OK; - union acpi_object *element; + union acpi_object element; struct acpi_buffer buffer = { 0, NULL }; - if (!data) return AE_BAD_PARAMETER; - element = kzalloc(sizeof(union acpi_object), irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL); - if (!element) - return AE_NO_MEMORY; - buffer.length = sizeof(union acpi_object); - buffer.pointer = element; + buffer.pointer = &element; status = acpi_evaluate_object(handle, pathname, arguments, &buffer); if (ACPI_FAILURE(status)) { acpi_util_eval_error(handle, pathname, status); - kfree(element); return status; } - if (element->type != ACPI_TYPE_INTEGER) { + if (element.type != ACPI_TYPE_INTEGER) { acpi_util_eval_error(handle, pathname, AE_BAD_DATA); - kfree(element); return AE_BAD_DATA; } - *data = element->integer.value; - kfree(element); + *data = element.integer.value; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Return value [%llu]\n", *data)); diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index a29b0ccac65a..baa441929720 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -41,7 +41,6 @@ #include <acpi/acpi_bus.h> #include <acpi/acpi_drivers.h> -#define ACPI_VIDEO_COMPONENT 0x08000000 #define ACPI_VIDEO_CLASS "video" #define ACPI_VIDEO_BUS_NAME "Video Bus" #define ACPI_VIDEO_DEVICE_NAME "Video Device" @@ -739,7 +738,8 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) device->cap._DSS = 1; } - max_level = acpi_video_init_brightness(device); + if (acpi_video_backlight_support()) + max_level = acpi_video_init_brightness(device); if (device->cap._BCL && device->cap._BCM && max_level > 0) { int result; @@ -785,18 +785,21 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) printk(KERN_ERR PREFIX "Create sysfs link\n"); } - if (device->cap._DCS && device->cap._DSS){ - static int count = 0; - char *name; - name = kzalloc(MAX_NAME_LEN, GFP_KERNEL); - if (!name) - return; - sprintf(name, "acpi_video%d", count++); - device->output_dev = video_output_register(name, - NULL, device, &acpi_output_properties); - kfree(name); + + if (acpi_video_display_switch_support()) { + + if (device->cap._DCS && device->cap._DSS) { + static int count; + char *name; + name = kzalloc(MAX_NAME_LEN, GFP_KERNEL); + if (!name) + return; + sprintf(name, "acpi_video%d", count++); + device->output_dev = video_output_register(name, + NULL, device, &acpi_output_properties); + kfree(name); + } } - return; } /* @@ -842,11 +845,16 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video) static int acpi_video_bus_check(struct acpi_video_bus *video) { acpi_status status = -ENOENT; - + struct device *dev; if (!video) return -EINVAL; + dev = acpi_get_physical_pci_device(video->device->handle); + if (!dev) + return -ENODEV; + put_device(dev); + /* Since there is no HID, CID and so on for VGA driver, we have * to check well known required nodes. */ @@ -2094,12 +2102,6 @@ static int __init acpi_video_init(void) { int result = 0; - - /* - acpi_dbg_level = 0xFFFFFFFF; - acpi_dbg_layer = 0x08000000; - */ - acpi_video_dir = proc_mkdir(ACPI_VIDEO_CLASS, acpi_root_dir); if (!acpi_video_dir) return -ENODEV; diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c new file mode 100644 index 000000000000..f022eb6f5637 --- /dev/null +++ b/drivers/acpi/video_detect.c @@ -0,0 +1,267 @@ +/* + * Copyright (C) 2008 SuSE Linux Products GmbH + * Thomas Renninger <trenn@suse.de> + * + * May be copied or modified under the terms of the GNU General Public License + * + * video_detect.c: + * Provides acpi_is_video_device() for early scanning of ACPI devices in scan.c + * There a Linux specific (Spec does not provide a HID for video devices) is + * assinged + * + * After PCI devices are glued with ACPI devices + * acpi_get_physical_pci_device() can be called to identify ACPI graphics + * devices for which a real graphics card is plugged in + * + * Now acpi_video_get_capabilities() can be called to check which + * capabilities the graphics cards plugged in support. The check for general + * video capabilities will be triggered by the first caller of + * acpi_video_get_capabilities(NULL); which will happen when the first + * backlight (or display output) switching supporting driver calls: + * acpi_video_backlight_support(); + * + * Depending on whether ACPI graphics extensions (cmp. ACPI spec Appendix B) + * are available, video.ko should be used to handle the device. + * + * Otherwise vendor specific drivers like thinkpad_acpi, asus_acpi, + * sony_acpi,... can take care about backlight brightness and display output + * switching. + * + * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m) + * this file will not be compiled, acpi_video_get_capabilities() and + * acpi_video_backlight_support() will always return 0 and vendor specific + * drivers always can handle backlight. + * + */ + +#include <linux/acpi.h> +#include <linux/dmi.h> + +ACPI_MODULE_NAME("video"); +#define _COMPONENT ACPI_VIDEO_COMPONENT + +static long acpi_video_support; +static bool acpi_video_caps_checked; + +static acpi_status +acpi_backlight_cap_match(acpi_handle handle, u32 level, void *context, + void **retyurn_value) +{ + long *cap = context; + acpi_handle h_dummy; + + if (ACPI_SUCCESS(acpi_get_handle(handle, "_BCM", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(handle, "_BCL", &h_dummy))) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found generic backlight " + "support\n")); + *cap |= ACPI_VIDEO_BACKLIGHT; + /* We have backlight support, no need to scan further */ + return AE_CTRL_TERMINATE; + } + return 0; +} + +/* Returns true if the device is a video device which can be handled by + * video.ko. + * The device will get a Linux specific CID added in scan.c to + * identify the device as an ACPI graphics device + * Be aware that the graphics device may not be physically present + * Use acpi_video_get_capabilities() to detect general ACPI video + * capabilities of present cards + */ +long acpi_is_video_device(struct acpi_device *device) +{ + acpi_handle h_dummy; + long video_caps = 0; + + if (!device) + return 0; + + /* Does this device able to support video switching ? */ + if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy))) + video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING; + + /* Does this device able to retrieve a video ROM ? */ + if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy))) + video_caps |= ACPI_VIDEO_ROM_AVAILABLE; + + /* Does this device able to configure which video head to be POSTed ? */ + if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy))) + video_caps |= ACPI_VIDEO_DEVICE_POSTING; + + /* Only check for backlight functionality if one of the above hit. */ + if (video_caps) + acpi_walk_namespace(ACPI_TYPE_DEVICE, device->handle, + ACPI_UINT32_MAX, acpi_backlight_cap_match, + &video_caps, NULL); + + return video_caps; +} +EXPORT_SYMBOL(acpi_is_video_device); + +static acpi_status +find_video(acpi_handle handle, u32 lvl, void *context, void **rv) +{ + long *cap = context; + struct device *dev; + struct acpi_device *acpi_dev; + + const struct acpi_device_id video_ids[] = { + {ACPI_VIDEO_HID, 0}, + {"", 0}, + }; + if (acpi_bus_get_device(handle, &acpi_dev)) + return AE_OK; + + if (!acpi_match_device_ids(acpi_dev, video_ids)) { + dev = acpi_get_physical_pci_device(handle); + if (!dev) + return AE_OK; + put_device(dev); + *cap |= acpi_is_video_device(acpi_dev); + } + return AE_OK; +} + +/* + * Returns the video capabilities of a specific ACPI graphics device + * + * if NULL is passed as argument all ACPI devices are enumerated and + * all graphics capabilities of physically present devices are + * summerized and returned. This is cached and done only once. + */ +long acpi_video_get_capabilities(acpi_handle graphics_handle) +{ + long caps = 0; + struct acpi_device *tmp_dev; + acpi_status status; + + if (acpi_video_caps_checked && graphics_handle == NULL) + return acpi_video_support; + + if (!graphics_handle) { + /* Only do the global walk through all graphics devices once */ + acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, find_video, + &caps, NULL); + /* There might be boot param flags set already... */ + acpi_video_support |= caps; + acpi_video_caps_checked = 1; + /* Add blacklists here. Be careful to use the right *DMI* bits + * to still be able to override logic via boot params, e.g.: + * + * if (dmi_name_in_vendors("XY")) { + * acpi_video_support |= + * ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR; + * acpi_video_support |= + * ACPI_VIDEO_BACKLIGHT_DMI_VENDOR; + *} + */ + } else { + status = acpi_bus_get_device(graphics_handle, &tmp_dev); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, "Invalid device")); + return 0; + } + acpi_walk_namespace(ACPI_TYPE_DEVICE, graphics_handle, + ACPI_UINT32_MAX, find_video, + &caps, NULL); + } + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "We have 0x%lX video support %s %s\n", + graphics_handle ? caps : acpi_video_support, + graphics_handle ? "on device " : "in general", + graphics_handle ? acpi_device_bid(tmp_dev) : "")); + return caps; +} +EXPORT_SYMBOL(acpi_video_get_capabilities); + +/* Returns true if video.ko can do backlight switching */ +int acpi_video_backlight_support(void) +{ + /* + * We must check whether the ACPI graphics device is physically plugged + * in. Therefore this must be called after binding PCI and ACPI devices + */ + if (!acpi_video_caps_checked) + acpi_video_get_capabilities(NULL); + + /* First check for boot param -> highest prio */ + if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_FORCE_VIDEO) + return 1; + + /* Then check for DMI blacklist -> second highest prio */ + if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_DMI_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_DMI_VIDEO) + return 1; + + /* Then go the default way */ + return acpi_video_support & ACPI_VIDEO_BACKLIGHT; +} +EXPORT_SYMBOL(acpi_video_backlight_support); + +/* + * Returns true if video.ko can do display output switching. + * This does not work well/at all with binary graphics drivers + * which disable system io ranges and do it on their own. + */ +int acpi_video_display_switch_support(void) +{ + if (!acpi_video_caps_checked) + acpi_video_get_capabilities(NULL); + + if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO) + return 1; + + if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VIDEO) + return 1; + + return acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING; +} +EXPORT_SYMBOL(acpi_video_display_switch_support); + +/* + * Use acpi_display_output=vendor/video or acpi_backlight=vendor/video + * To force that backlight or display output switching is processed by vendor + * specific acpi drivers or video.ko driver. + */ +int __init acpi_backlight(char *str) +{ + if (str == NULL || *str == '\0') + return 1; + else { + if (!strcmp("vendor", str)) + acpi_video_support |= + ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR; + if (!strcmp("video", str)) + acpi_video_support |= + ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO; + } + return 1; +} +__setup("acpi_backlight=", acpi_backlight); + +int __init acpi_display_output(char *str) +{ + if (str == NULL || *str == '\0') + return 1; + else { + if (!strcmp("vendor", str)) + acpi_video_support |= + ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR; + if (!strcmp("video", str)) + acpi_video_support |= + ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO; + } + return 1; +} +__setup("acpi_display_output=", acpi_display_output); diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c index 47cd7baf9b1b..8a8b377712c9 100644 --- a/drivers/acpi/wmi.c +++ b/drivers/acpi/wmi.c @@ -660,7 +660,7 @@ static void acpi_wmi_notify(acpi_handle handle, u32 event, void *data) wblock->handler(event, wblock->handler_data); acpi_bus_generate_netlink_event( - device->pnp.device_class, device->dev.bus_id, + device->pnp.device_class, dev_name(&device->dev), event, 0); break; } diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 78fbec8ceda0..421b7c71e72d 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -153,7 +153,7 @@ config SATA_PROMISE If unsure, say N. config SATA_SX4 - tristate "Promise SATA SX4 support" + tristate "Promise SATA SX4 support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for Promise Serial ATA SX4. @@ -219,8 +219,8 @@ config PATA_ACPI otherwise unsupported hardware. config PATA_ALI - tristate "ALi PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "ALi PATA support" + depends on PCI help This option enables support for the ALi ATA interfaces found on the many ALi chipsets. @@ -263,7 +263,7 @@ config PATA_ATIIXP If unsure, say N. config PATA_CMD640_PCI - tristate "CMD640 PCI PATA support (Very Experimental)" + tristate "CMD640 PCI PATA support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the CMD640 PCI IDE @@ -291,8 +291,8 @@ config PATA_CS5520 If unsure, say N. config PATA_CS5530 - tristate "CS5530 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "CS5530 PATA support" + depends on PCI help This option enables support for the Cyrix/NatSemi/AMD CS5530 companion chip used with the MediaGX/Geode processor family. @@ -309,8 +309,8 @@ config PATA_CS5535 If unsure, say N. config PATA_CS5536 - tristate "CS5536 PATA support (Experimental)" - depends on PCI && X86 && !X86_64 && EXPERIMENTAL + tristate "CS5536 PATA support" + depends on PCI && X86 && !X86_64 help This option enables support for the AMD CS5536 companion chip used with the Geode LX processor family. @@ -363,7 +363,7 @@ config PATA_HPT37X If unsure, say N. config PATA_HPT3X2N - tristate "HPT 372N/302N PATA support (Very Experimental)" + tristate "HPT 372N/302N PATA support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the N variant HPT PATA @@ -389,8 +389,8 @@ config PATA_HPT3X3_DMA problems with DMA on this chipset. config PATA_ISAPNP - tristate "ISA Plug and Play PATA support (Experimental)" - depends on EXPERIMENTAL && ISAPNP + tristate "ISA Plug and Play PATA support" + depends on ISAPNP help This option enables support for ISA plug & play ATA controllers such as those found on old soundcards. @@ -498,8 +498,8 @@ config PATA_NINJA32 If unsure, say N. config PATA_NS87410 - tristate "Nat Semi NS87410 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "Nat Semi NS87410 PATA support" + depends on PCI help This option enables support for the National Semiconductor NS87410 PCI-IDE controller. @@ -507,8 +507,8 @@ config PATA_NS87410 If unsure, say N. config PATA_NS87415 - tristate "Nat Semi NS87415 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "Nat Semi NS87415 PATA support" + depends on PCI help This option enables support for the National Semiconductor NS87415 PCI-IDE controller. @@ -544,8 +544,8 @@ config PATA_PCMCIA If unsure, say N. config PATA_PDC_OLD - tristate "Older Promise PATA controller support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "Older Promise PATA controller support" + depends on PCI help This option enables support for the Promise 20246, 20262, 20263, 20265 and 20267 adapters. @@ -559,7 +559,7 @@ config PATA_QDI Support for QDI 6500 and 6580 PATA controllers on VESA local bus. config PATA_RADISYS - tristate "RADISYS 82600 PATA support (Very Experimental)" + tristate "RADISYS 82600 PATA support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the RADISYS 82600 @@ -586,8 +586,8 @@ config PATA_RZ1000 If unsure, say N. config PATA_SC1200 - tristate "SC1200 PATA support (Very Experimental)" - depends on PCI && EXPERIMENTAL + tristate "SC1200 PATA support" + depends on PCI help This option enables support for the NatSemi/AMD SC1200 SoC companion chip used with the Geode processor family. @@ -620,8 +620,8 @@ config PATA_SIL680 If unsure, say N. config PATA_SIS - tristate "SiS PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "SiS PATA support" + depends on PCI help This option enables support for SiS PATA controllers diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 8e37be19bbf5..c11936e13dd3 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1066,6 +1066,28 @@ static int piix_broken_suspend(void) if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL)) return 1; + /* TECRA M4 sometimes forgets its identify and reports bogus + * DMI information. As the bogus information is a bit + * generic, match as many entries as possible. This manual + * matching is necessary because dmi_system_id.matches is + * limited to four entries. + */ + if (dmi_get_system_info(DMI_SYS_VENDOR) && + dmi_get_system_info(DMI_PRODUCT_NAME) && + dmi_get_system_info(DMI_PRODUCT_VERSION) && + dmi_get_system_info(DMI_PRODUCT_SERIAL) && + dmi_get_system_info(DMI_BOARD_VENDOR) && + dmi_get_system_info(DMI_BOARD_NAME) && + dmi_get_system_info(DMI_BOARD_VERSION) && + !strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") && + !strcmp(dmi_get_system_info(DMI_PRODUCT_NAME), "000000") && + !strcmp(dmi_get_system_info(DMI_PRODUCT_VERSION), "000000") && + !strcmp(dmi_get_system_info(DMI_PRODUCT_SERIAL), "000000") && + !strcmp(dmi_get_system_info(DMI_BOARD_VENDOR), "TOSHIBA") && + !strcmp(dmi_get_system_info(DMI_BOARD_NAME), "Portable PC") && + !strcmp(dmi_get_system_info(DMI_BOARD_VERSION), "Version A0")) + return 1; + return 0; } diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 622350d9b2e3..bc6695e3c848 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -612,7 +612,7 @@ u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev) if (tf->flags & ATA_TFLAG_LBA48) { block |= (u64)tf->hob_lbah << 40; block |= (u64)tf->hob_lbam << 32; - block |= tf->hob_lbal << 24; + block |= (u64)tf->hob_lbal << 24; } else block |= (tf->device & 0xf) << 24; @@ -1712,6 +1712,8 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, else tag = 0; + if (test_and_set_bit(tag, &ap->qc_allocated)) + BUG(); qc = __ata_qc_from_tag(ap, tag); qc->tag = tag; @@ -2490,6 +2492,13 @@ int ata_dev_configure(struct ata_device *dev) } } + if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) { + ata_dev_printk(dev, KERN_WARNING, "WARNING: device requires " + "firmware update to be fully functional.\n"); + ata_dev_printk(dev, KERN_WARNING, " contact the vendor " + "or visit http://ata.wiki.kernel.org.\n"); + } + return 0; err_out_nosup: @@ -4040,6 +4049,73 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "ST380817AS", "3.42", ATA_HORKAGE_NONCQ }, { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ }, + /* Seagate NCQ + FLUSH CACHE firmware bug */ + { "ST31500341AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31500341AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31500341AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31500341AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31500341AS", "SD19", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST31000333AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "SD19", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST3640623AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "SD19", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST3640323AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "SD19", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST3320813AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "SD19", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST3320613AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "SD19", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + /* Blacklist entries taken from Silicon Image 3124/3132 Windows driver .inf file - also several Linux problem reports */ { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, }, @@ -4563,6 +4639,37 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) } /** + * ata_qc_new - Request an available ATA command, for queueing + * @ap: Port associated with device @dev + * @dev: Device from whom we request an available command structure + * + * LOCKING: + * None. + */ + +static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) +{ + struct ata_queued_cmd *qc = NULL; + unsigned int i; + + /* no command while frozen */ + if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) + return NULL; + + /* the last tag is reserved for internal command. */ + for (i = 0; i < ATA_MAX_QUEUE - 1; i++) + if (!test_and_set_bit(i, &ap->qc_allocated)) { + qc = __ata_qc_from_tag(ap, i); + break; + } + + if (qc) + qc->tag = i; + + return qc; +} + +/** * ata_qc_new_init - Request an available ATA command, and initialize it * @dev: Device from whom we request an available command structure * @tag: command tag @@ -4571,20 +4678,16 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) * None. */ -struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag) +struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) { struct ata_port *ap = dev->link->ap; struct ata_queued_cmd *qc; - if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) - return NULL; - - qc = __ata_qc_from_tag(ap, tag); + qc = ata_qc_new(ap); if (qc) { qc->scsicmd = NULL; qc->ap = ap; qc->dev = dev; - qc->tag = tag; ata_qc_reinit(qc); } @@ -4592,6 +4695,31 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag) return qc; } +/** + * ata_qc_free - free unused ata_queued_cmd + * @qc: Command to complete + * + * Designed to free unused ata_queued_cmd object + * in case something prevents using it. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_qc_free(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int tag; + + WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ + + qc->flags = 0; + tag = qc->tag; + if (likely(ata_tag_valid(tag))) { + qc->tag = ATA_TAG_POISON; + clear_bit(tag, &ap->qc_allocated); + } +} + void __ata_qc_complete(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 8077bdf5d30d..32da9a93ce44 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -610,9 +610,6 @@ void ata_scsi_error(struct Scsi_Host *host) if (ata_ncq_enabled(dev)) ehc->saved_ncq_enabled |= 1 << devno; } - - /* set last reset timestamp to some time in the past */ - ehc->last_reset = jiffies - 60 * HZ; } ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS; @@ -2281,17 +2278,21 @@ int ata_eh_reset(struct ata_link *link, int classify, if (link->flags & ATA_LFLAG_NO_SRST) softreset = NULL; - now = jiffies; - deadline = ata_deadline(ehc->last_reset, ATA_EH_RESET_COOL_DOWN); - if (time_before(now, deadline)) - schedule_timeout_uninterruptible(deadline - now); + /* make sure each reset attemp is at least COOL_DOWN apart */ + if (ehc->i.flags & ATA_EHI_DID_RESET) { + now = jiffies; + WARN_ON(time_after(ehc->last_reset, now)); + deadline = ata_deadline(ehc->last_reset, + ATA_EH_RESET_COOL_DOWN); + if (time_before(now, deadline)) + schedule_timeout_uninterruptible(deadline - now); + } spin_lock_irqsave(ap->lock, flags); ap->pflags |= ATA_PFLAG_RESETTING; spin_unlock_irqrestore(ap->lock, flags); ata_eh_about_to_do(link, NULL, ATA_EH_RESET); - ehc->last_reset = jiffies; ata_link_for_each_dev(dev, link) { /* If we issue an SRST then an ATA drive (not ATAPI) @@ -2379,7 +2380,6 @@ int ata_eh_reset(struct ata_link *link, int classify, /* * Perform reset */ - ehc->last_reset = jiffies; if (ata_is_host_link(link)) ata_eh_freeze_port(ap); @@ -2391,6 +2391,7 @@ int ata_eh_reset(struct ata_link *link, int classify, reset == softreset ? "soft" : "hard"); /* mark that this EH session started with reset */ + ehc->last_reset = jiffies; if (reset == hardreset) ehc->i.flags |= ATA_EHI_DID_HARDRESET; else @@ -2535,7 +2536,7 @@ int ata_eh_reset(struct ata_link *link, int classify, ata_eh_done(link, NULL, ATA_EH_RESET); if (slave) ata_eh_done(slave, NULL, ATA_EH_RESET); - ehc->last_reset = jiffies; + ehc->last_reset = jiffies; /* update to completion time */ ehc->i.action |= ATA_EH_REVALIDATE; rc = 0; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 3fa75eac135d..47c7afcb36f2 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -709,11 +709,7 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, { struct ata_queued_cmd *qc; - if (cmd->request->tag != -1) - qc = ata_qc_new_init(dev, cmd->request->tag); - else - qc = ata_qc_new_init(dev, 0); - + qc = ata_qc_new_init(dev); if (qc) { qc->scsicmd = cmd; qc->scsidone = done; @@ -1108,17 +1104,7 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); depth = min(ATA_MAX_QUEUE - 1, depth); - - /* - * If this device is behind a port multiplier, we have - * to share the tag map between all devices on that PMP. - * Set up the shared tag map here and we get automatic. - */ - if (dev->link->ap->pmp_link) - scsi_init_shared_tag_map(sdev->host, ATA_MAX_QUEUE - 1); - - scsi_set_tag_type(sdev, MSG_SIMPLE_TAG); - scsi_activate_tcq(sdev, depth); + scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth); } return 0; @@ -1958,11 +1944,6 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf) hdr[1] |= (1 << 7); memcpy(rbuf, hdr, sizeof(hdr)); - - /* if ncq, set tags supported */ - if (ata_id_has_ncq(args->id)) - rbuf[7] |= (1 << 1); - memcpy(&rbuf[8], "ATA ", 8); ata_id_string(args->id, &rbuf[16], ATA_ID_PROD, 16); ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV, 4); diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 4b4739486327..9033d164c4ec 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1227,10 +1227,19 @@ fsm_start: /* ATA PIO protocol */ if (unlikely((status & ATA_DRQ) == 0)) { /* handle BSY=0, DRQ=0 as error */ - if (likely(status & (ATA_ERR | ATA_DF))) + if (likely(status & (ATA_ERR | ATA_DF))) { /* device stops HSM for abort/error */ qc->err_mask |= AC_ERR_DEV; - else { + + /* If diagnostic failed and this is + * IDENTIFY, it's likely a phantom + * device. Mark hint. + */ + if (qc->dev->horkage & + ATA_HORKAGE_DIAGNOSTIC) + qc->err_mask |= + AC_ERR_NODEV_HINT; + } else { /* HSM violation. Let EH handle this. * Phantom devices also trigger this * condition. Mark hint. diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index d3831d39bdaa..fe2839e58774 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -74,7 +74,7 @@ extern struct ata_link *ata_dev_phys_link(struct ata_device *dev); extern void ata_force_cbl(struct ata_port *ap); extern u64 ata_tf_to_lba(const struct ata_taskfile *tf); extern u64 ata_tf_to_lba48(const struct ata_taskfile *tf); -extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag); +extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev); extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, u64 block, u32 n_block, unsigned int tf_flags, unsigned int tag); @@ -103,6 +103,7 @@ extern int ata_dev_configure(struct ata_device *dev); extern int sata_down_spd_limit(struct ata_link *link); extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel); extern void ata_sg_clean(struct ata_queued_cmd *qc); +extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); extern void __ata_qc_complete(struct ata_queued_cmd *qc); extern int atapi_check_dma(struct ata_queued_cmd *qc); @@ -118,22 +119,6 @@ extern struct ata_port *ata_port_alloc(struct ata_host *host); extern void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy); extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm); -/** - * ata_qc_free - free unused ata_queued_cmd - * @qc: Command to complete - * - * Designed to free unused ata_queued_cmd object - * in case something prevents using it. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -static inline void ata_qc_free(struct ata_queued_cmd *qc) -{ - qc->flags = 0; - qc->tag = ATA_TAG_POISON; -} - /* libata-acpi.c */ #ifdef CONFIG_ATA_ACPI extern void ata_acpi_associate_sata_port(struct ata_port *ap); diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index 1b2d4a0f5f74..8b236af84c2e 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -72,7 +72,6 @@ /** * cs5535_cable_detect - detect cable type * @ap: Port to detect on - * @deadline: deadline jiffies for the operation * * Perform cable detection for ATA66 capable cable. Return a libata * cable type. diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c index 73f8332cb679..afed92976198 100644 --- a/drivers/ata/pata_cs5536.c +++ b/drivers/ata/pata_cs5536.c @@ -110,7 +110,6 @@ static inline int cs5536_write(struct pci_dev *pdev, int reg, int val) /** * cs5536_cable_detect - detect cable type * @ap: Port to detect on - * @deadline: deadline jiffies for the operation * * Perform cable detection for ATA66 capable cable. Return a libata * cable type. diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index f2b83eabc7c7..e0c4f05d7d57 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -183,7 +183,9 @@ static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask) mask &= ~(0xF8 << ATA_SHIFT_UDMA); if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4)) mask &= ~(0xF0 << ATA_SHIFT_UDMA); - } + } else if (adev->class == ATA_DEV_ATAPI) + mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + return ata_bmdma_mode_filter(adev, mask); } @@ -211,11 +213,15 @@ static u32 hpt36x_find_mode(struct ata_port *ap, int speed) static int hpt36x_cable_detect(struct ata_port *ap) { - u8 ata66; struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ata66; + /* + * Each channel of pata_hpt366 occupies separate PCI function + * as the primary channel and bit1 indicates the cable type. + */ pci_read_config_byte(pdev, 0x5A, &ata66); - if (ata66 & (1 << ap->port_no)) + if (ata66 & 2) return ATA_CBL_PATA40; return ATA_CBL_PATA80; } @@ -382,10 +388,10 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* PCI clocking determines the ATA timing values to use */ /* info_hpt366 is safe against re-entry so we can scribble on it */ switch((reg1 & 0x700) >> 8) { - case 5: + case 9: hpriv = &hpt366_40; break; - case 9: + case 5: hpriv = &hpt366_25; break; default: diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 4e466eae8b46..4dd9a3b031e4 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -44,7 +44,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_ninja32" -#define DRV_VERSION "0.1.1" +#define DRV_VERSION "0.1.3" /** @@ -130,7 +130,8 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) return rc; pci_set_master(dev); - /* Set up the register mappings */ + /* Set up the register mappings. We use the I/O mapping as only the + older chips also have MMIO on BAR 1 */ base = host->iomap[0]; if (!base) return -ENOMEM; @@ -167,8 +168,12 @@ static int ninja32_reinit_one(struct pci_dev *pdev) #endif static const struct pci_device_id ninja32[] = { + { 0x10FC, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0x8008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0xf008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0xf02C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { }, }; diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 271cb64d429e..64b2e2281ee7 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -416,6 +416,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e), PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6), + PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506), PCMCIA_DEVICE_NULL, }; diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index f8b3ffc8ae9e..c2e6fb9f2ef9 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -39,9 +39,11 @@ #define RB500_CF_MAXPORTS 1 #define RB500_CF_IO_DELAY 400 -#define RB500_CF_REG_CMD 0x0800 +#define RB500_CF_REG_BASE 0x0800 +#define RB500_CF_REG_ERR 0x080D #define RB500_CF_REG_CTRL 0x080E -#define RB500_CF_REG_DATA 0x0C00 +/* 32bit buffered data register offset */ +#define RB500_CF_REG_DBUF32 0x0C00 struct rb532_cf_info { void __iomem *iobase; @@ -72,11 +74,12 @@ static void rb532_pata_exec_command(struct ata_port *ap, rb532_pata_finish_io(ap); } -static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, +static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) { struct ata_port *ap = adev->link->ap; void __iomem *ioaddr = ap->ioaddr.data_addr; + int retlen = buflen; if (write_data) { for (; buflen > 0; buflen--, buf++) @@ -87,6 +90,7 @@ static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, } rb532_pata_finish_io(adev->link->ap); + return retlen; } static void rb532_pata_freeze(struct ata_port *ap) @@ -146,13 +150,14 @@ static void rb532_pata_setup_ports(struct ata_host *ah) ap->pio_mask = 0x1f; /* PIO4 */ ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO; - ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_CMD; + ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_BASE; ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL; ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL; ata_sff_std_ports(&ap->ioaddr); - ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA; + ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DBUF32; + ap->ioaddr.error_addr = info->iobase + RB500_CF_REG_ERR; } static __devinit int rb532_pata_driver_probe(struct platform_device *pdev) diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c index c8cc027789fe..6aeeeeb34124 100644 --- a/drivers/ata/pata_sch.c +++ b/drivers/ata/pata_sch.c @@ -83,7 +83,7 @@ static struct ata_port_operations sch_pata_ops = { }; static struct ata_port_info sch_port_info = { - .flags = 0, + .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, /* pio0-4 */ .mwdma_mask = ATA_MWDMA2, /* mwdma0-2 */ .udma_mask = ATA_UDMA5, /* udma0-5 */ diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index d34236611752..e4be55e047f6 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -56,7 +56,6 @@ static const struct sis_laptop sis_laptop[] = { { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ { 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */ { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */ - { 0x5513, 0x1039, 0x5513 }, /* Targa Visionary 1000 */ /* end marker */ { 0, } }; diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c index 615412364e99..6b969f8c684f 100644 --- a/drivers/atm/horizon.c +++ b/drivers/atm/horizon.c @@ -2705,7 +2705,7 @@ static int __devinit hrz_probe(struct pci_dev *pci_dev, const struct pci_device_ /* XXX DEV_LABEL is a guess */ if (!request_region(iobase, HRZ_IO_EXTENT, DEV_LABEL)) { - return -EINVAL; + err = -EINVAL; goto out_disable; } diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 61ad8d639ba3..0344a8a8321d 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -21,7 +21,8 @@ config BLK_DEV_FD ---help--- If you want to use the floppy disk drive(s) of your PC under Linux, say Y. Information about this driver, especially important for IBM - Thinkpad users, is contained in <file:Documentation/floppy.txt>. + Thinkpad users, is contained in + <file:Documentation/blockdev/floppy.txt>. That file also contains the location of the Floppy driver FAQ as well as location of the fdutils package used to configure additional parameters of the driver at run time. @@ -76,7 +77,7 @@ config PARIDE your computer's parallel port. Most of them are actually IDE devices using a parallel port IDE adapter. This option enables the PARIDE subsystem which contains drivers for many of these external drives. - Read <file:Documentation/paride.txt> for more information. + Read <file:Documentation/blockdev/paride.txt> for more information. If you have said Y to the "Parallel-port support" configuration option, you may share a single port between your printer and other @@ -114,9 +115,9 @@ config BLK_CPQ_DA help This is the driver for Compaq Smart Array controllers. Everyone using these boards should say Y here. See the file - <file:Documentation/cpqarray.txt> for the current list of boards - supported by this driver, and for further information on the use of - this driver. + <file:Documentation/blockdev/cpqarray.txt> for the current list of + boards supported by this driver, and for further information on the + use of this driver. config BLK_CPQ_CISS_DA tristate "Compaq Smart Array 5xxx support" @@ -124,7 +125,7 @@ config BLK_CPQ_CISS_DA help This is the driver for Compaq Smart Array 5xxx controllers. Everyone using these boards should say Y here. - See <file:Documentation/cciss.txt> for the current list of + See <file:Documentation/blockdev/cciss.txt> for the current list of boards supported by this driver, and for further information on the use of this driver. @@ -135,7 +136,7 @@ config CISS_SCSI_TAPE help When enabled (Y), this option allows SCSI tape drives and SCSI medium changers (tape robots) to be accessed via a Compaq 5xxx array - controller. (See <file:Documentation/cciss.txt> for more details.) + controller. (See <file:Documentation/blockdev/cciss.txt> for more details.) "SCSI support" and "SCSI tape support" must also be enabled for this option to work. @@ -149,8 +150,8 @@ config BLK_DEV_DAC960 help This driver adds support for the Mylex DAC960, AcceleRAID, and eXtremeRAID PCI RAID controllers. See the file - <file:Documentation/README.DAC960> for further information about - this driver. + <file:Documentation/blockdev/README.DAC960> for further information + about this driver. To compile this driver as a module, choose M here: the module will be called DAC960. @@ -278,9 +279,9 @@ config BLK_DEV_NBD userland (making server and client physically the same computer, communicating using the loopback network device). - Read <file:Documentation/nbd.txt> for more information, especially - about where to find the server code, which runs in user space and - does not need special kernel support. + Read <file:Documentation/blockdev/nbd.txt> for more information, + especially about where to find the server code, which runs in user + space and does not need special kernel support. Note that this has nothing to do with the network file systems NFS or Coda; you can say N here even if you intend to use NFS or Coda. @@ -321,8 +322,8 @@ config BLK_DEV_RAM store a copy of a minimal root file system off of a floppy into RAM during the initial install of Linux. - Note that the kernel command line option "ramdisk=XX" is now - obsolete. For details, read <file:Documentation/ramdisk.txt>. + Note that the kernel command line option "ramdisk=XX" is now obsolete. + For details, read <file:Documentation/blockdev/ramdisk.txt>. To compile this driver as a module, choose M here: the module will be called rd. diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 12de1fdaa6c6..9f7c543cc04b 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1693,6 +1693,11 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time) for (i = 0; i <= h->highest_lun; i++) { int j; drv_found = 0; + + /* skip holes in the array from already deleted drives */ + if (h->drv[i].raid_level == -1) + continue; + for (j = 0; j < num_luns; j++) { memcpy(&lunid, &ld_buff->LUN[j][0], 4); lunid = le32_to_cpu(lunid); @@ -2847,7 +2852,7 @@ static void do_cciss_request(struct request_queue *q) h->maxSG = seg; #ifdef CCISS_DEBUG - printk(KERN_DEBUG "cciss: Submitting %d sectors in %d segments\n", + printk(KERN_DEBUG "cciss: Submitting %lu sectors in %d segments\n", creq->nr_sectors, seg); #endif /* CCISS_DEBUG */ @@ -3197,7 +3202,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) c->paddr = pci_resource_start(pdev, 0); /* addressing mode bits already removed */ #ifdef CCISS_DEBUG - printk("address 0 = %x\n", c->paddr); + printk("address 0 = %lx\n", c->paddr); #endif /* CCISS_DEBUG */ c->vaddr = remap_pci_mem(c->paddr, 0x250); @@ -3224,7 +3229,8 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) #endif /* CCISS_DEBUG */ cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr); #ifdef CCISS_DEBUG - printk("cfg base address index = %x\n", cfg_base_addr_index); + printk("cfg base address index = %llx\n", + (unsigned long long)cfg_base_addr_index); #endif /* CCISS_DEBUG */ if (cfg_base_addr_index == -1) { printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n"); @@ -3234,7 +3240,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET); #ifdef CCISS_DEBUG - printk("cfg offset = %x\n", cfg_offset); + printk("cfg offset = %llx\n", (unsigned long long)cfg_offset); #endif /* CCISS_DEBUG */ c->cfgtable = remap_pci_mem(pci_resource_start(pdev, cfg_base_addr_index) + diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 14db747a636e..cf29cc4e6ab7 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4124,7 +4124,7 @@ static int __init floppy_setup(char *str) printk("\n"); } else DPRINT("botched floppy option\n"); - DPRINT("Read Documentation/floppy.txt\n"); + DPRINT("Read Documentation/blockdev/floppy.txt\n"); return 0; } diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index f20bf359b84f..dc7a8c352da2 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -302,7 +302,7 @@ static struct kobj_type kobj_pkt_type_wqueue = { static void pkt_sysfs_dev_new(struct pktcdvd_device *pd) { if (class_pktcdvd) { - pd->dev = device_create(class_pktcdvd, NULL, pd->pkt_dev, NULL, + pd->dev = device_create(class_pktcdvd, NULL, MKDEV(0, 0), NULL, "%s", pd->name); if (IS_ERR(pd->dev)) pd->dev = NULL; @@ -2790,7 +2790,7 @@ static int pkt_new_dev(struct pktcdvd_device *pd, dev_t dev) return 0; out_mem: - blkdev_put(bdev, FMODE_READ|FMODE_WRITE); + blkdev_put(bdev, FMODE_READ | FMODE_NDELAY); /* This is safe: open() is still holding a reference. */ module_put(THIS_MODULE); return ret; @@ -2975,7 +2975,7 @@ static int pkt_remove_dev(dev_t pkt_dev) pkt_debugfs_dev_remove(pd); pkt_sysfs_dev_remove(pd); - blkdev_put(pd->bdev, FMODE_READ|FMODE_WRITE); + blkdev_put(pd->bdev, FMODE_READ | FMODE_NDELAY); remove_proc_entry(pd->name, pkt_proc); DPRINTK(DRIVER_NAME": writer %s unmapped\n", pd->name); diff --git a/drivers/block/ub.c b/drivers/block/ub.c index fccac18d3111..048d71d244d7 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -1546,8 +1546,6 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd) /* * Reset management - * XXX Move usb_reset_device to khubd. Hogging kevent is not a good thing. - * XXX Make usb_sync_reset asynchronous. */ static void ub_reset_enter(struct ub_dev *sc, int try) @@ -1633,6 +1631,22 @@ static void ub_reset_task(struct work_struct *work) } /* + * XXX Reset brackets are too much hassle to implement, so just stub them + * in order to prevent forced unbinding (which deadlocks solid when our + * ->disconnect method waits for the reset to complete and this kills keventd). + * + * XXX Tell Alan to move usb_unlock_device inside of usb_reset_device, + * or else the post_reset is invoked, and restats I/O on a locked device. + */ +static int ub_pre_reset(struct usb_interface *iface) { + return 0; +} + +static int ub_post_reset(struct usb_interface *iface) { + return 0; +} + +/* * This is called from a process context. */ static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun) @@ -2446,6 +2460,8 @@ static struct usb_driver ub_driver = { .probe = ub_probe, .disconnect = ub_disconnect, .id_table = ub_usb_ids, + .pre_reset = ub_pre_reset, + .post_reset = ub_post_reset, }; static int __init ub_init(void) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index b220c686089d..2d19f0cc47f2 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -338,12 +338,18 @@ wait: static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size) { struct request_queue *rq; + elevator_t *old_e; rq = blk_init_queue(do_blkif_request, &blkif_io_lock); if (rq == NULL) return -1; - elevator_init(rq, "noop"); + old_e = rq->elevator; + if (IS_ERR_VALUE(elevator_init(rq, "noop"))) + printk(KERN_WARNING + "blkfront: Switch elevator failed, use default\n"); + else + elevator_exit(old_e); /* Hard sector size and max sectors impersonate the equiv. hardware. */ blk_queue_hardsect_size(rq, sector_size); diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index ecab9e67d47a..29e1dfafb7c6 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -194,7 +194,7 @@ struct ace_device { int in_irq; /* Details of hardware device */ - unsigned long physaddr; + resource_size_t physaddr; void __iomem *baseaddr; int irq; int bus_width; /* 0 := 8 bit; 1 := 16 bit */ @@ -628,8 +628,8 @@ static void ace_fsm_dostate(struct ace_device *ace) /* Okay, it's a data request, set it up for transfer */ dev_dbg(ace->dev, - "request: sec=%lx hcnt=%lx, ccnt=%x, dir=%i\n", - req->sector, req->hard_nr_sectors, + "request: sec=%llx hcnt=%lx, ccnt=%x, dir=%i\n", + (unsigned long long) req->sector, req->hard_nr_sectors, req->current_nr_sectors, rq_data_dir(req)); ace->req = req; @@ -935,7 +935,8 @@ static int __devinit ace_setup(struct ace_device *ace) int rc; dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace); - dev_dbg(ace->dev, "physaddr=0x%lx irq=%i\n", ace->physaddr, ace->irq); + dev_dbg(ace->dev, "physaddr=0x%llx irq=%i\n", + (unsigned long long)ace->physaddr, ace->irq); spin_lock_init(&ace->lock); init_completion(&ace->id_completion); @@ -1017,8 +1018,8 @@ static int __devinit ace_setup(struct ace_device *ace) /* Print the identification */ dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n", (version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff); - dev_dbg(ace->dev, "physaddr 0x%lx, mapped to 0x%p, irq=%i\n", - ace->physaddr, ace->baseaddr, ace->irq); + dev_dbg(ace->dev, "physaddr 0x%llx, mapped to 0x%p, irq=%i\n", + (unsigned long long) ace->physaddr, ace->baseaddr, ace->irq); ace->media_change = 1; ace_revalidate_disk(ace->gd); @@ -1035,8 +1036,8 @@ err_alloc_disk: err_blk_initq: iounmap(ace->baseaddr); err_ioremap: - dev_info(ace->dev, "xsysace: error initializing device at 0x%lx\n", - ace->physaddr); + dev_info(ace->dev, "xsysace: error initializing device at 0x%llx\n", + (unsigned long long) ace->physaddr); return -ENOMEM; } @@ -1059,7 +1060,7 @@ static void __devexit ace_teardown(struct ace_device *ace) } static int __devinit -ace_alloc(struct device *dev, int id, unsigned long physaddr, +ace_alloc(struct device *dev, int id, resource_size_t physaddr, int irq, int bus_width) { struct ace_device *ace; @@ -1119,7 +1120,7 @@ static void __devexit ace_free(struct device *dev) static int __devinit ace_probe(struct platform_device *dev) { - unsigned long physaddr = 0; + resource_size_t physaddr = 0; int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */ int id = dev->id; int irq = NO_IRQ; @@ -1165,7 +1166,7 @@ static int __devinit ace_of_probe(struct of_device *op, const struct of_device_id *match) { struct resource res; - unsigned long physaddr; + resource_size_t physaddr; const u32 *id; int irq, bus_width, rc; diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c index d16b02423d61..7d2e91cccb13 100644 --- a/drivers/cdrom/cdrom.c +++ b/drivers/cdrom/cdrom.c @@ -2081,10 +2081,6 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf, if (!q) return -ENXIO; - rq = blk_get_request(q, READ, GFP_KERNEL); - if (!rq) - return -ENOMEM; - cdi->last_sense = 0; while (nframes) { @@ -2096,9 +2092,17 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf, len = nr * CD_FRAMESIZE_RAW; + rq = blk_get_request(q, READ, GFP_KERNEL); + if (!rq) { + ret = -ENOMEM; + break; + } + ret = blk_rq_map_user(q, rq, NULL, ubuf, len, GFP_KERNEL); - if (ret) + if (ret) { + blk_put_request(rq); break; + } rq->cmd[0] = GPCMD_READ_CD; rq->cmd[1] = 1 << 2; @@ -2124,6 +2128,7 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf, if (blk_rq_unmap_user(bio)) ret = -EFAULT; + blk_put_request(rq); if (ret) break; @@ -2133,7 +2138,6 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf, ubuf += len; } - blk_put_request(rq); return ret; } diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 43b35d0369d6..43d6ba83a191 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -124,7 +124,7 @@ config COMPUTONE which give you many serial ports. You would need something like this to connect more than two modems to your Linux box, for instance in order to become a dial-in server. If you have a card like that, say - Y here and read <file:Documentation/computone.txt>. + Y here and read <file:Documentation/serial/computone.txt>. To compile this driver as module, choose M here: the module will be called ip2. @@ -136,7 +136,7 @@ config ROCKETPORT This driver supports Comtrol RocketPort and RocketModem PCI boards. These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or modems. For information about the RocketPort/RocketModem boards - and this driver read <file:Documentation/rocket.txt>. + and this driver read <file:Documentation/serial/rocket.txt>. To compile this driver as a module, choose M here: the module will be called rocket. @@ -154,7 +154,7 @@ config CYCLADES your Linux box, for instance in order to become a dial-in server. For information about the Cyclades-Z card, read - <file:Documentation/README.cycladesZ>. + <file:Documentation/serial/README.cycladesZ>. To compile this driver as a module, choose M here: the module will be called cyclades. @@ -183,7 +183,7 @@ config DIGIEPCA box, for instance in order to become a dial-in server. This driver supports the original PC (ISA) boards as well as PCI, and EISA. If you have a card like this, say Y here and read the file - <file:Documentation/digiepca.txt>. + <file:Documentation/serial/digiepca.txt>. To compile this driver as a module, choose M here: the module will be called epca. @@ -289,7 +289,7 @@ config RISCOM8 which gives you many serial ports. You would need something like this to connect more than two modems to your Linux box, for instance in order to become a dial-in server. If you have a card like that, - say Y here and read the file <file:Documentation/riscom8.txt>. + say Y here and read the file <file:Documentation/serial/riscom8.txt>. Also it's possible to say M here and compile this driver as kernel loadable module; the module will be called riscom8. @@ -304,8 +304,8 @@ config SPECIALIX your Linux box, for instance in order to become a dial-in server. If you have a card like that, say Y here and read the file - <file:Documentation/specialix.txt>. Also it's possible to say M here - and compile this driver as kernel loadable module which will be + <file:Documentation/serial/specialix.txt>. Also it's possible to say + M here and compile this driver as kernel loadable module which will be called specialix. config SX @@ -313,7 +313,7 @@ config SX depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) help This is a driver for the SX and SI multiport serial cards. - Please read the file <file:Documentation/sx.txt> for details. + Please read the file <file:Documentation/serial/sx.txt> for details. This driver can only be built as a module ( = code which can be inserted in and removed from the running kernel whenever you want). @@ -344,8 +344,8 @@ config STALDRV like this to connect more than two modems to your Linux box, for instance in order to become a dial-in server. If you say Y here, you will be asked for your specific card model in the next - questions. Make sure to read <file:Documentation/stallion.txt> in - this case. If you have never heard about all this, it's safe to + questions. Make sure to read <file:Documentation/serial/stallion.txt> + in this case. If you have never heard about all this, it's safe to say N. config STALLION @@ -354,7 +354,7 @@ config STALLION help If you have an EasyIO or EasyConnection 8/32 multiport Stallion card, then this is for you; say Y. Make sure to read - <file:Documentation/stallion.txt>. + <file:Documentation/serial/stallion.txt>. To compile this driver as a module, choose M here: the module will be called stallion. @@ -365,7 +365,7 @@ config ISTALLION help If you have an EasyConnection 8/64, ONboard, Brumby or Stallion serial multiport card, say Y here. Make sure to read - <file:Documentation/stallion.txt>. + <file:Documentation/serial/stallion.txt>. To compile this driver as a module, choose M here: the module will be called istallion. diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index 0f004b65ec03..03f95ec08f59 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -27,7 +27,7 @@ static int uninorth_rev; static int is_u3; -static char __devinitdata *aperture = NULL; +static char *aperture = NULL; static int uninorth_fetch_size(void) { diff --git a/drivers/char/cp437.uni b/drivers/char/cp437.uni index 1f06889a96b9..bc6163484f62 100644 --- a/drivers/char/cp437.uni +++ b/drivers/char/cp437.uni @@ -27,7 +27,7 @@ 0x0c U+2640 0x0d U+266a 0x0e U+266b -0x0f U+263c +0x0f U+263c U+00a4 0x10 U+25b6 U+25ba 0x11 U+25c0 U+25c4 0x12 U+2195 @@ -55,7 +55,7 @@ 0x24 U+0024 0x25 U+0025 0x26 U+0026 -0x27 U+0027 +0x27 U+0027 U+00b4 0x28 U+0028 0x29 U+0029 0x2a U+002a @@ -84,7 +84,7 @@ 0x41 U+0041 U+00c0 U+00c1 U+00c2 U+00c3 0x42 U+0042 0x43 U+0043 U+00a9 -0x44 U+0044 +0x44 U+0044 U+00d0 0x45 U+0045 U+00c8 U+00ca U+00cb 0x46 U+0046 0x47 U+0047 @@ -140,7 +140,7 @@ 0x79 U+0079 U+00fd 0x7a U+007a 0x7b U+007b -0x7c U+007c U+00a5 +0x7c U+007c U+00a6 0x7d U+007d 0x7e U+007e # @@ -263,10 +263,10 @@ 0xe8 U+03a6 U+00d8 0xe9 U+0398 0xea U+03a9 U+2126 -0xeb U+03b4 +0xeb U+03b4 U+00f0 0xec U+221e 0xed U+03c6 U+00f8 -0xee U+03b5 +0xee U+03b5 U+2208 0xef U+2229 0xf0 U+2261 0xf1 U+00b1 diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 8a59aaa21be5..7a88dfd4427b 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -422,9 +422,11 @@ struct ipmi_smi { /** * The driver model view of the IPMI messaging driver. */ -static struct device_driver ipmidriver = { - .name = "ipmi", - .bus = &platform_bus_type +static struct platform_driver ipmidriver = { + .driver = { + .name = "ipmi", + .bus = &platform_bus_type + } }; static DEFINE_MUTEX(ipmidriver_mutex); @@ -2384,9 +2386,9 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, * representing the interfaced BMC already */ if (bmc->guid_set) - old_bmc = ipmi_find_bmc_guid(&ipmidriver, bmc->guid); + old_bmc = ipmi_find_bmc_guid(&ipmidriver.driver, bmc->guid); else - old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver, + old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver.driver, bmc->id.product_id, bmc->id.device_id); @@ -2416,7 +2418,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, snprintf(name, sizeof(name), "ipmi_bmc.%4.4x", bmc->id.product_id); - while (ipmi_find_bmc_prod_dev_id(&ipmidriver, + while (ipmi_find_bmc_prod_dev_id(&ipmidriver.driver, bmc->id.product_id, bmc->id.device_id)) { if (!warn_printed) { @@ -2446,7 +2448,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, " Unable to allocate platform device\n"); return -ENOMEM; } - bmc->dev->dev.driver = &ipmidriver; + bmc->dev->dev.driver = &ipmidriver.driver; dev_set_drvdata(&bmc->dev->dev, bmc); kref_init(&bmc->refcount); @@ -4247,7 +4249,7 @@ static int ipmi_init_msghandler(void) if (initialized) return 0; - rv = driver_register(&ipmidriver); + rv = driver_register(&ipmidriver.driver); if (rv) { printk(KERN_ERR PFX "Could not register IPMI driver\n"); return rv; @@ -4308,7 +4310,7 @@ static __exit void cleanup_ipmi(void) remove_proc_entry(proc_ipmi_root->name, NULL); #endif /* CONFIG_PROC_FS */ - driver_unregister(&ipmidriver); + driver_unregister(&ipmidriver.driver); initialized = 0; diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 3123bf57ad91..3000135f2ead 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -114,9 +114,11 @@ static char *si_to_str[] = { "kcs", "smic", "bt" }; #define DEVICE_NAME "ipmi_si" -static struct device_driver ipmi_driver = { - .name = DEVICE_NAME, - .bus = &platform_bus_type +static struct platform_driver ipmi_driver = { + .driver = { + .name = DEVICE_NAME, + .bus = &platform_bus_type + } }; @@ -2868,7 +2870,7 @@ static int try_smi_init(struct smi_info *new_smi) goto out_err; } new_smi->dev = &new_smi->pdev->dev; - new_smi->dev->driver = &ipmi_driver; + new_smi->dev->driver = &ipmi_driver.driver; rv = platform_device_add(new_smi->pdev); if (rv) { @@ -2983,7 +2985,7 @@ static __devinit int init_ipmi_si(void) initialized = 1; /* Register the device drivers. */ - rv = driver_register(&ipmi_driver); + rv = driver_register(&ipmi_driver.driver); if (rv) { printk(KERN_ERR "init_ipmi_si: Unable to register driver: %d\n", @@ -3052,7 +3054,7 @@ static __devinit int init_ipmi_si(void) #ifdef CONFIG_PPC_OF of_unregister_platform_driver(&ipmi_of_platform_driver); #endif - driver_unregister(&ipmi_driver); + driver_unregister(&ipmi_driver.driver); printk(KERN_WARNING "ipmi_si: Unable to find any System Interface(s)\n"); return -ENODEV; @@ -3151,7 +3153,7 @@ static __exit void cleanup_ipmi_si(void) cleanup_one_si(e); mutex_unlock(&smi_infos_lock); - driver_unregister(&ipmi_driver); + driver_unregister(&ipmi_driver.driver); } module_exit(cleanup_ipmi_si); diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 7d30ee1d3fca..04e4549299ba 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -7,12 +7,14 @@ * Original driver code supplied by Multi-Tech * * Changes - * 1/9/98 alan@redhat.com Merge to 2.0.x kernel tree + * 1/9/98 alan@lxorguk.ukuu.org.uk + * Merge to 2.0.x kernel tree * Obtain and use official major/minors * Loader switched to a misc device * (fixed range check bug as a side effect) * Printk clean up - * 9/12/98 alan@redhat.com Rough port to 2.1.x + * 9/12/98 alan@lxorguk.ukuu.org.uk + * Rough port to 2.1.x * * 10/6/99 sameer Merged the ISA and PCI drivers to * a new unified driver. diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 44e5d60f517e..4b10770fa937 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -3739,7 +3739,7 @@ static int stli_getbrdnr(void) * do is go probing around in the usual places hoping we can find it. */ -static int stli_findeisabrds(void) +static int __init stli_findeisabrds(void) { struct stlibrd *brdp; unsigned int iobase, eid, i; @@ -3935,7 +3935,7 @@ static struct stlibrd *stli_allocbrd(void) * can find. */ -static int stli_initbrds(void) +static int __init stli_initbrds(void) { struct stlibrd *brdp, *nxtbrdp; struct stlconf conf; diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 8beef50f95a0..047766915411 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -14,7 +14,8 @@ * (at your option) any later version. * * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox - * <alan@redhat.com>. The original 1.8 code is available on www.moxa.com. + * <alan@lxorguk.ukuu.org.uk>. The original 1.8 code is available on + * www.moxa.com. * - Fixed x86_64 cleanness */ diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index 3b23270eaa65..a8f15e6be594 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -418,7 +418,7 @@ static irqreturn_t cd2401_rxerr_interrupt(int irq, void *dev_id) TTY_OVERRUN); /* If the flip buffer itself is - overflowing, we still loose + overflowing, we still lose the next incoming character. */ if (tty_buffer_request_room(tty, 1) != diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 2457b07dabd6..f4374437a033 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -523,7 +523,7 @@ static int acpi_driver_registered; static int sonypi_ec_write(u8 addr, u8 value) { -#ifdef CONFIG_ACPI_EC +#ifdef CONFIG_ACPI if (SONYPI_ACPI_ACTIVE) return ec_write(addr, value); #endif @@ -539,7 +539,7 @@ static int sonypi_ec_write(u8 addr, u8 value) static int sonypi_ec_read(u8 addr, u8 *value) { -#ifdef CONFIG_ACPI_EC +#ifdef CONFIG_ACPI if (SONYPI_ACPI_ACTIVE) return ec_read(addr, value); #endif diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index 242fd46fda22..a16b94f12eb2 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -72,7 +72,7 @@ /* * There is a bunch of documentation about the card, jumpers, config * settings, restrictions, cables, device names and numbers in - * Documentation/specialix.txt + * Documentation/serial/specialix.txt */ #include <linux/module.h> diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 59f472143f08..1412a8d1e58d 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -1795,12 +1795,15 @@ retry_open: } #endif if (device == MKDEV(TTYAUX_MAJOR, 1)) { - driver = tty_driver_kref_get(console_device(&index)); - if (driver) { - /* Don't let /dev/console block */ - filp->f_flags |= O_NONBLOCK; - noctty = 1; - goto got_driver; + struct tty_driver *console_driver = console_device(&index); + if (console_driver) { + driver = tty_driver_kref_get(console_driver); + if (driver) { + /* Don't let /dev/console block */ + filp->f_flags |= O_NONBLOCK; + noctty = 1; + goto got_driver; + } } mutex_unlock(&tty_mutex); return -ENODEV; diff --git a/drivers/char/vt.c b/drivers/char/vt.c index a5af6072e2b3..008176edbd64 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -2274,7 +2274,7 @@ rescan_last_byte: continue; /* nothing to display */ } /* Glyph not found */ - if ((!(vc->vc_utf && !vc->vc_disp_ctrl) || c < 128) && !(c & ~charmask)) { + if ((!(vc->vc_utf && !vc->vc_disp_ctrl) && c < 128) && !(c & ~charmask)) { /* In legacy mode use the glyph we get by a 1:1 mapping. This would make absolutely no sense with Unicode in mind, but do this for ASCII characters since a font may lack diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c index aa7f7962a9a0..05d897764f02 100644 --- a/drivers/char/xilinx_hwicap/buffer_icap.c +++ b/drivers/char/xilinx_hwicap/buffer_icap.c @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2003-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h index 8b0252bf06e2..d4f419ee87ab 100644 --- a/drivers/char/xilinx_hwicap/buffer_icap.h +++ b/drivers/char/xilinx_hwicap/buffer_icap.h @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2003-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c index 776b50528478..02225eb19cf6 100644 --- a/drivers/char/xilinx_hwicap/fifo_icap.c +++ b/drivers/char/xilinx_hwicap/fifo_icap.c @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2007-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h index 62bda453c90b..4c9dd9a3b62a 100644 --- a/drivers/char/xilinx_hwicap/fifo_icap.h +++ b/drivers/char/xilinx_hwicap/fifo_icap.h @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2007-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index ed132fe55d3d..f40ab699860f 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2002 Xilinx Inc., Systems Engineering Group * (c) Copyright 2004 Xilinx Inc., Systems Engineering Group * (c) Copyright 2007-2008 Xilinx Inc. @@ -626,7 +623,7 @@ static int __devinit hwicap_setup(struct device *dev, int id, if (!request_mem_region(drvdata->mem_start, drvdata->mem_size, DRIVER_NAME)) { dev_err(dev, "Couldn't lock memory region at %Lx\n", - regs_res->start); + (unsigned long long) regs_res->start); retval = -EBUSY; goto failed1; } @@ -645,9 +642,10 @@ static int __devinit hwicap_setup(struct device *dev, int id, mutex_init(&drvdata->sem); drvdata->is_open = 0; - dev_info(dev, "ioremap %lx to %p with size %Lx\n", - (unsigned long int)drvdata->mem_start, - drvdata->base_address, drvdata->mem_size); + dev_info(dev, "ioremap %llx to %p with size %llx\n", + (unsigned long long) drvdata->mem_start, + drvdata->base_address, + (unsigned long long) drvdata->mem_size); cdev_init(&drvdata->cdev, &hwicap_fops); drvdata->cdev.owner = THIS_MODULE; diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h index 24d0d9b938fb..8cca11981c5f 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2003-2007 Xilinx Inc. * All rights reserved. * diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c index b6ad3ac5916e..24607669a52b 100644 --- a/drivers/crypto/talitos.c +++ b/drivers/crypto/talitos.c @@ -1357,7 +1357,7 @@ static int hw_supports(struct device *dev, __be32 desc_hdr_template) return ret; } -static int __devexit talitos_remove(struct of_device *ofdev) +static int talitos_remove(struct of_device *ofdev) { struct device *dev = &ofdev->dev; struct talitos_private *priv = dev_get_drvdata(dev); @@ -1622,7 +1622,7 @@ static struct of_platform_driver talitos_driver = { .name = "talitos", .match_table = talitos_match, .probe = talitos_probe, - .remove = __devexit_p(talitos_remove), + .remove = talitos_remove, }; static int __init talitos_init(void) diff --git a/drivers/dca/dca-core.c b/drivers/dca/dca-core.c index ec249d2db633..d883e1b8bb8c 100644 --- a/drivers/dca/dca-core.c +++ b/drivers/dca/dca-core.c @@ -270,6 +270,6 @@ static void __exit dca_exit(void) dca_sysfs_exit(); } -module_init(dca_init); +subsys_initcall(dca_init); module_exit(dca_exit); diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index dc003a3a787d..657996517374 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -388,7 +388,10 @@ int dma_async_device_register(struct dma_device *device) init_completion(&device->done); kref_init(&device->refcount); + + mutex_lock(&dma_list_mutex); device->dev_id = id++; + mutex_unlock(&dma_list_mutex); /* represent channels in sysfs. Probably want devs too */ list_for_each_entry(chan, &device->channels, device_node) { @@ -399,8 +402,8 @@ int dma_async_device_register(struct dma_device *device) chan->chan_id = chancnt++; chan->dev.class = &dma_devclass; chan->dev.parent = device->dev; - snprintf(chan->dev.bus_id, BUS_ID_SIZE, "dma%dchan%d", - device->dev_id, chan->chan_id); + dev_set_name(&chan->dev, "dma%dchan%d", + device->dev_id, chan->chan_id); rc = device_register(&chan->dev); if (rc) { diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index d1e381e35a9e..ed9636bfb54a 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -20,11 +20,11 @@ static unsigned int test_buf_size = 16384; module_param(test_buf_size, uint, S_IRUGO); MODULE_PARM_DESC(test_buf_size, "Size of the memcpy test buffer"); -static char test_channel[BUS_ID_SIZE]; +static char test_channel[20]; module_param_string(channel, test_channel, sizeof(test_channel), S_IRUGO); MODULE_PARM_DESC(channel, "Bus ID of the channel to test (default: any)"); -static char test_device[BUS_ID_SIZE]; +static char test_device[20]; module_param_string(device, test_device, sizeof(test_device), S_IRUGO); MODULE_PARM_DESC(device, "Bus ID of the DMA Engine to test (default: any)"); @@ -80,14 +80,14 @@ static bool dmatest_match_channel(struct dma_chan *chan) { if (test_channel[0] == '\0') return true; - return strcmp(chan->dev.bus_id, test_channel) == 0; + return strcmp(dev_name(&chan->dev), test_channel) == 0; } static bool dmatest_match_device(struct dma_device *device) { if (test_device[0] == '\0') return true; - return strcmp(device->dev->bus_id, test_device) == 0; + return strcmp(dev_name(device->dev), test_device) == 0; } static unsigned long dmatest_random(void) @@ -332,7 +332,7 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan) dtc = kmalloc(sizeof(struct dmatest_chan), GFP_KERNEL); if (!dtc) { - pr_warning("dmatest: No memory for %s\n", chan->dev.bus_id); + pr_warning("dmatest: No memory for %s\n", dev_name(&chan->dev)); return DMA_NAK; } @@ -343,16 +343,16 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan) thread = kzalloc(sizeof(struct dmatest_thread), GFP_KERNEL); if (!thread) { pr_warning("dmatest: No memory for %s-test%u\n", - chan->dev.bus_id, i); + dev_name(&chan->dev), i); break; } thread->chan = dtc->chan; smp_wmb(); thread->task = kthread_run(dmatest_func, thread, "%s-test%u", - chan->dev.bus_id, i); + dev_name(&chan->dev), i); if (IS_ERR(thread->task)) { pr_warning("dmatest: Failed to run thread %s-test%u\n", - chan->dev.bus_id, i); + dev_name(&chan->dev), i); kfree(thread); break; } @@ -362,7 +362,7 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan) list_add_tail(&thread->node, &dtc->threads); } - pr_info("dmatest: Started %u threads using %s\n", i, chan->dev.bus_id); + pr_info("dmatest: Started %u threads using %s\n", i, dev_name(&chan->dev)); list_add_tail(&dtc->node, &dmatest_channels); nr_channels++; @@ -379,7 +379,7 @@ static enum dma_state_client dmatest_remove_channel(struct dma_chan *chan) list_del(&dtc->node); dmatest_cleanup_channel(dtc); pr_debug("dmatest: lost channel %s\n", - chan->dev.bus_id); + dev_name(&chan->dev)); return DMA_ACK; } } @@ -418,7 +418,7 @@ dmatest_event(struct dma_client *client, struct dma_chan *chan, default: pr_info("dmatest: Unhandled event %u (%s)\n", - state, chan->dev.bus_id); + state, dev_name(&chan->dev)); break; } diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index b0438c4f0c30..6607fdd00b1c 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -525,7 +525,7 @@ static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx) } hw->ctl = IOAT_DMA_DESCRIPTOR_CTL_CP_STS; - if (new->async_tx.callback) { + if (first->async_tx.callback) { hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_INT_GN; if (first != new) { /* move callback into to last desc */ @@ -617,7 +617,7 @@ static dma_cookie_t ioat2_tx_submit(struct dma_async_tx_descriptor *tx) } hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_CP_STS; - if (new->async_tx.callback) { + if (first->async_tx.callback) { hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_INT_GN; if (first != new) { /* move callback into to last desc */ @@ -807,6 +807,12 @@ static void ioat_dma_free_chan_resources(struct dma_chan *chan) struct ioat_desc_sw *desc, *_desc; int in_use_descs = 0; + /* Before freeing channel resources first check + * if they have been previously allocated for this channel. + */ + if (ioat_chan->desccount == 0) + return; + tasklet_disable(&ioat_chan->cleanup_task); ioat_dma_memcpy_cleanup(ioat_chan); @@ -869,6 +875,7 @@ static void ioat_dma_free_chan_resources(struct dma_chan *chan) ioat_chan->last_completion = ioat_chan->completion_addr = 0; ioat_chan->pending = 0; ioat_chan->dmacount = 0; + ioat_chan->desccount = 0; ioat_chan->watchdog_completion = 0; ioat_chan->last_compl_desc_addr_hw = 0; ioat_chan->watchdog_tcp_cookie = @@ -1334,10 +1341,12 @@ static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan) */ #define IOAT_TEST_SIZE 2000 +DECLARE_COMPLETION(test_completion); static void ioat_dma_test_callback(void *dma_async_param) { printk(KERN_ERR "ioatdma: ioat_dma_test_callback(%p)\n", dma_async_param); + complete(&test_completion); } /** @@ -1403,7 +1412,8 @@ static int ioat_dma_self_test(struct ioatdma_device *device) goto free_resources; } device->common.device_issue_pending(dma_chan); - msleep(1); + + wait_for_completion_timeout(&test_completion, msecs_to_jiffies(3000)); if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL) != DMA_SUCCESS) { diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index 71fba82462cb..6be317262200 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -85,18 +85,28 @@ iop_adma_run_tx_complete_actions(struct iop_adma_desc_slot *desc, enum dma_ctrl_flags flags = desc->async_tx.flags; u32 src_cnt; dma_addr_t addr; + dma_addr_t dest; + src_cnt = unmap->unmap_src_cnt; + dest = iop_desc_get_dest_addr(unmap, iop_chan); if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) { - addr = iop_desc_get_dest_addr(unmap, iop_chan); - dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE); + enum dma_data_direction dir; + + if (src_cnt > 1) /* is xor? */ + dir = DMA_BIDIRECTIONAL; + else + dir = DMA_FROM_DEVICE; + + dma_unmap_page(dev, dest, len, dir); } if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) { - src_cnt = unmap->unmap_src_cnt; while (src_cnt--) { addr = iop_desc_get_src_addr(unmap, iop_chan, src_cnt); + if (addr == dest) + continue; dma_unmap_page(dev, addr, len, DMA_TO_DEVICE); } @@ -411,6 +421,7 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx) int slot_cnt; int slots_per_op; dma_cookie_t cookie; + dma_addr_t next_dma; grp_start = sw_desc->group_head; slot_cnt = grp_start->slot_cnt; @@ -425,12 +436,12 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx) &old_chain_tail->chain_node); /* fix up the hardware chain */ - iop_desc_set_next_desc(old_chain_tail, grp_start->async_tx.phys); + next_dma = grp_start->async_tx.phys; + iop_desc_set_next_desc(old_chain_tail, next_dma); + BUG_ON(iop_desc_get_next_desc(old_chain_tail) != next_dma); /* flush */ - /* 1/ don't add pre-chained descriptors - * 2/ dummy read to flush next_desc write - */ - BUG_ON(iop_desc_get_next_desc(sw_desc)); + /* check for pre-chained descriptors */ + iop_paranoia(iop_desc_get_next_desc(sw_desc)); /* increment the pending count by the number of slots * memcpy operations have a 1:1 (slot:operation) relation diff --git a/drivers/dma/iovlock.c b/drivers/dma/iovlock.c index e763d723e4cf..9f6fe46a9b87 100644 --- a/drivers/dma/iovlock.c +++ b/drivers/dma/iovlock.c @@ -55,7 +55,6 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len) int nr_iovecs = 0; int iovec_len_used = 0; int iovec_pages_used = 0; - long err; /* don't pin down non-user-based iovecs */ if (segment_eq(get_fs(), KERNEL_DS)) @@ -72,23 +71,21 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len) local_list = kmalloc(sizeof(*local_list) + (nr_iovecs * sizeof (struct dma_page_list)) + (iovec_pages_used * sizeof (struct page*)), GFP_KERNEL); - if (!local_list) { - err = -ENOMEM; + if (!local_list) goto out; - } /* list of pages starts right after the page list array */ pages = (struct page **) &local_list->page_list[nr_iovecs]; + local_list->nr_iovecs = 0; + for (i = 0; i < nr_iovecs; i++) { struct dma_page_list *page_list = &local_list->page_list[i]; len -= iov[i].iov_len; - if (!access_ok(VERIFY_WRITE, iov[i].iov_base, iov[i].iov_len)) { - err = -EFAULT; + if (!access_ok(VERIFY_WRITE, iov[i].iov_base, iov[i].iov_len)) goto unpin; - } page_list->nr_pages = num_pages_spanned(&iov[i]); page_list->base_address = iov[i].iov_base; @@ -109,10 +106,8 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len) NULL); up_read(¤t->mm->mmap_sem); - if (ret != page_list->nr_pages) { - err = -ENOMEM; + if (ret != page_list->nr_pages) goto unpin; - } local_list->nr_iovecs = i + 1; } @@ -122,7 +117,7 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len) unpin: dma_unpin_iovec_pages(local_list); out: - return ERR_PTR(err); + return NULL; } void dma_unpin_iovec_pages(struct dma_pinned_list *pinned_list) diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index 0328da020a10..bcda17426411 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -311,17 +311,26 @@ mv_xor_run_tx_complete_actions(struct mv_xor_desc_slot *desc, enum dma_ctrl_flags flags = desc->async_tx.flags; u32 src_cnt; dma_addr_t addr; + dma_addr_t dest; + src_cnt = unmap->unmap_src_cnt; + dest = mv_desc_get_dest_addr(unmap); if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) { - addr = mv_desc_get_dest_addr(unmap); - dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE); + enum dma_data_direction dir; + + if (src_cnt > 1) /* is xor ? */ + dir = DMA_BIDIRECTIONAL; + else + dir = DMA_FROM_DEVICE; + dma_unmap_page(dev, dest, len, dir); } if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) { - src_cnt = unmap->unmap_src_cnt; while (src_cnt--) { addr = mv_desc_get_src_addr(unmap, src_cnt); + if (addr == dest) + continue; dma_unmap_page(dev, addr, len, DMA_TO_DEVICE); } diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c index f0d9b415db50..d335086f4a26 100644 --- a/drivers/edac/i5000_edac.c +++ b/drivers/edac/i5000_edac.c @@ -1381,6 +1381,7 @@ static int i5000_probe1(struct pci_dev *pdev, int dev_idx) if (mci == NULL) return -ENOMEM; + kobject_get(&mci->edac_mci_kobj); debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci); mci->dev = &pdev->dev; /* record ptr to the generic device */ @@ -1453,6 +1454,7 @@ fail1: i5000_put_devices(mci); fail0: + kobject_put(&mci->edac_mci_kobj); edac_mc_free(mci); return -ENODEV; } @@ -1498,7 +1500,7 @@ static void __devexit i5000_remove_one(struct pci_dev *pdev) /* retrieve references to resources, and free those resources */ i5000_put_devices(mci); - + kobject_put(&mci->edac_mci_kobj); edac_mc_free(mci); } diff --git a/drivers/edac/i82875p_edac.c b/drivers/edac/i82875p_edac.c index e43bdc43a1bf..ebb037b78758 100644 --- a/drivers/edac/i82875p_edac.c +++ b/drivers/edac/i82875p_edac.c @@ -182,8 +182,6 @@ static struct pci_dev *mci_pdev; /* init dev: in case that AGP code has * already registered driver */ -static int i82875p_registered = 1; - static struct edac_pci_ctl_info *i82875p_pci; static void i82875p_get_error_info(struct mem_ctl_info *mci, @@ -295,6 +293,7 @@ static int i82875p_setup_overfl_dev(struct pci_dev *pdev, "%s(): pci_bus_add_device() Failed\n", __func__); } + pci_bus_assign_resources(dev->bus); } *ovrfl_pdev = dev; @@ -409,6 +408,9 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx) goto fail0; } + /* Keeps mci available after edac_mc_del_mc() till edac_mc_free() */ + kobject_get(&mci->edac_mci_kobj); + debugf3("%s(): init mci\n", __func__); mci->dev = &pdev->dev; mci->mtype_cap = MEM_FLAG_DDR; @@ -451,6 +453,7 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx) return 0; fail1: + kobject_put(&mci->edac_mci_kobj); edac_mc_free(mci); fail0: @@ -578,12 +581,11 @@ static void __exit i82875p_exit(void) { debugf3("%s()\n", __func__); + i82875p_remove_one(mci_pdev); + pci_dev_put(mci_pdev); + pci_unregister_driver(&i82875p_driver); - if (!i82875p_registered) { - i82875p_remove_one(mci_pdev); - pci_dev_put(mci_pdev); - } } module_init(i82875p_init); diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 46610b090415..ab9c01e462ef 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -974,6 +974,7 @@ at_context_queue_packet(struct context *ctx, struct fw_packet *packet) packet->ack = RCODE_SEND_ERROR; return -1; } + packet->payload_bus = payload_bus; d[2].req_count = cpu_to_le16(packet->payload_length); d[2].data_address = cpu_to_le32(payload_bus); @@ -1025,7 +1026,6 @@ static int handle_at_packet(struct context *context, struct driver_data *driver_data; struct fw_packet *packet; struct fw_ohci *ohci = context->ohci; - dma_addr_t payload_bus; int evt; if (last->transfer_status == 0) @@ -1038,9 +1038,8 @@ static int handle_at_packet(struct context *context, /* This packet was cancelled, just continue. */ return 1; - payload_bus = le32_to_cpu(last->data_address); - if (payload_bus != 0) - dma_unmap_single(ohci->card.device, payload_bus, + if (packet->payload_bus) + dma_unmap_single(ohci->card.device, packet->payload_bus, packet->payload_length, DMA_TO_DEVICE); evt = le16_to_cpu(last->transfer_status) & 0x1f; @@ -1697,6 +1696,10 @@ static int ohci_cancel_packet(struct fw_card *card, struct fw_packet *packet) if (packet->ack != 0) goto out; + if (packet->payload_bus) + dma_unmap_single(ohci->card.device, packet->payload_bus, + packet->payload_length, DMA_TO_DEVICE); + log_ar_at_event('T', packet->speed, packet->header, 0x20); driver_data->packet = NULL; packet->ack = RCODE_CANCELLED; diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index 97df6dac3a82..e54403ee59e7 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -372,6 +372,11 @@ static const struct { }, /* iPod mini */ { .firmware_revision = 0x0a2700, + .model = 0x000022, + .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, + }, + /* iPod mini */ { + .firmware_revision = 0x0a2700, .model = 0x000023, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c index 022ac4fabb67..2884f876397b 100644 --- a/drivers/firewire/fw-transaction.c +++ b/drivers/firewire/fw-transaction.c @@ -207,6 +207,7 @@ fw_fill_request(struct fw_packet *packet, int tcode, int tlabel, packet->speed = speed; packet->generation = generation; packet->ack = 0; + packet->payload_bus = 0; } /** @@ -581,6 +582,8 @@ fw_fill_response(struct fw_packet *response, u32 *request_header, BUG(); return; } + + response->payload_bus = 0; } EXPORT_SYMBOL(fw_fill_response); diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index aed7dbb17cda..839466f0a795 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h @@ -27,6 +27,7 @@ #include <linux/list.h> #include <linux/spinlock_types.h> #include <linux/timer.h> +#include <linux/types.h> #include <linux/workqueue.h> #define TCODE_IS_READ_REQUEST(tcode) (((tcode) & ~1) == 4) @@ -153,6 +154,7 @@ struct fw_packet { size_t header_length; void *payload; size_t payload_length; + dma_addr_t payload_bus; u32 timestamp; /* diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 8daf4793ac32..4a597d8c2f70 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -467,6 +467,17 @@ const char *dmi_get_system_info(int field) } EXPORT_SYMBOL(dmi_get_system_info); +/** + * dmi_name_in_serial - Check if string is in the DMI product serial + * information. + */ +int dmi_name_in_serial(const char *str) +{ + int f = DMI_PRODUCT_SERIAL; + if (dmi_ident[f] && strstr(dmi_ident[f], str)) + return 1; + return 0; +} /** * dmi_name_in_vendors - Check if string is anywhere in the DMI vendor information. diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 7f2ee27fe76b..48f49d93d249 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -65,6 +65,14 @@ config GPIO_SYSFS # put expanders in the right section, in alphabetical order +comment "Memory mapped GPIO expanders:" + +config GPIO_XILINX + bool "Xilinx GPIO support" + depends on PPC_OF + help + Say yes here to support the Xilinx FPGA GPIO device + comment "I2C GPIO expanders:" config GPIO_MAX732X diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 6aafdeb9ad03..49ac64e515e6 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -10,4 +10,5 @@ obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o obj-$(CONFIG_GPIO_PCA953X) += pca953x.o obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o +obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index faa1cc66e9cf..82020abc329e 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1134,7 +1134,7 @@ static void gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip) continue; is_out = test_bit(FLAG_IS_OUT, &gdesc->flags); - seq_printf(s, " gpio-%-3d (%-12s) %s %s", + seq_printf(s, " gpio-%-3d (%-20.20s) %s %s", gpio, gdesc->label, is_out ? "out" : "in ", chip->get diff --git a/drivers/gpio/xilinx_gpio.c b/drivers/gpio/xilinx_gpio.c new file mode 100644 index 000000000000..3c1177abebd3 --- /dev/null +++ b/drivers/gpio/xilinx_gpio.c @@ -0,0 +1,235 @@ +/* + * Xilinx gpio driver + * + * Copyright 2008 Xilinx, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> +#include <linux/io.h> +#include <linux/gpio.h> + +/* Register Offset Definitions */ +#define XGPIO_DATA_OFFSET (0x0) /* Data register */ +#define XGPIO_TRI_OFFSET (0x4) /* I/O direction register */ + +struct xgpio_instance { + struct of_mm_gpio_chip mmchip; + u32 gpio_state; /* GPIO state shadow register */ + u32 gpio_dir; /* GPIO direction shadow register */ + spinlock_t gpio_lock; /* Lock used for synchronization */ +}; + +/** + * xgpio_get - Read the specified signal of the GPIO device. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * + * This function reads the specified signal of the GPIO device. It returns 0 if + * the signal clear, 1 if signal is set or negative value on error. + */ +static int xgpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + + return (in_be32(mm_gc->regs + XGPIO_DATA_OFFSET) >> gpio) & 1; +} + +/** + * xgpio_set - Write the specified signal of the GPIO device. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * This function writes the specified value in to the specified signal of the + * GPIO device. + */ +static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + spin_lock_irqsave(&chip->gpio_lock, flags); + + /* Write to GPIO signal and set its direction to output */ + if (val) + chip->gpio_state |= 1 << gpio; + else + chip->gpio_state &= ~(1 << gpio); + out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state); + + spin_unlock_irqrestore(&chip->gpio_lock, flags); +} + +/** + * xgpio_dir_in - Set the direction of the specified GPIO signal as input. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * + * This function sets the direction of specified GPIO signal as input. + * It returns 0 if direction of GPIO signals is set as input otherwise it + * returns negative error value. + */ +static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + spin_lock_irqsave(&chip->gpio_lock, flags); + + /* Set the GPIO bit in shadow register and set direction as input */ + chip->gpio_dir |= (1 << gpio); + out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir); + + spin_unlock_irqrestore(&chip->gpio_lock, flags); + + return 0; +} + +/** + * xgpio_dir_out - Set the direction of the specified GPIO signal as output. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * This function sets the direction of specified GPIO signal as output. If all + * GPIO signals of GPIO chip is configured as input then it returns + * error otherwise it returns 0. + */ +static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + spin_lock_irqsave(&chip->gpio_lock, flags); + + /* Write state of GPIO signal */ + if (val) + chip->gpio_state |= 1 << gpio; + else + chip->gpio_state &= ~(1 << gpio); + out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state); + + /* Clear the GPIO bit in shadow register and set direction as output */ + chip->gpio_dir &= (~(1 << gpio)); + out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir); + + spin_unlock_irqrestore(&chip->gpio_lock, flags); + + return 0; +} + +/** + * xgpio_save_regs - Set initial values of GPIO pins + * @mm_gc: pointer to memory mapped GPIO chip structure + */ +static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state); + out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir); +} + +/** + * xgpio_of_probe - Probe method for the GPIO device. + * @np: pointer to device tree node + * + * This function probes the GPIO device in the device tree. It initializes the + * driver data structure. It returns 0, if the driver is bound to the GPIO + * device, or a negative value if there is an error. + */ +static int __devinit xgpio_of_probe(struct device_node *np) +{ + struct xgpio_instance *chip; + struct of_gpio_chip *ofchip; + int status = 0; + const u32 *tree_info; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + ofchip = &chip->mmchip.of_gc; + + /* Update GPIO state shadow register with default value */ + tree_info = of_get_property(np, "xlnx,dout-default", NULL); + if (tree_info) + chip->gpio_state = *tree_info; + + /* Update GPIO direction shadow register with default value */ + chip->gpio_dir = 0xFFFFFFFF; /* By default, all pins are inputs */ + tree_info = of_get_property(np, "xlnx,tri-default", NULL); + if (tree_info) + chip->gpio_dir = *tree_info; + + /* Check device node and parent device node for device width */ + ofchip->gc.ngpio = 32; /* By default assume full GPIO controller */ + tree_info = of_get_property(np, "xlnx,gpio-width", NULL); + if (!tree_info) + tree_info = of_get_property(np->parent, + "xlnx,gpio-width", NULL); + if (tree_info) + ofchip->gc.ngpio = *tree_info; + + spin_lock_init(&chip->gpio_lock); + + ofchip->gpio_cells = 2; + ofchip->gc.direction_input = xgpio_dir_in; + ofchip->gc.direction_output = xgpio_dir_out; + ofchip->gc.get = xgpio_get; + ofchip->gc.set = xgpio_set; + + chip->mmchip.save_regs = xgpio_save_regs; + + /* Call the OF gpio helper to setup and register the GPIO device */ + status = of_mm_gpiochip_add(np, &chip->mmchip); + if (status) { + kfree(chip); + pr_err("%s: error in probe function with status %d\n", + np->full_name, status); + return status; + } + pr_info("XGpio: %s: registered\n", np->full_name); + return 0; +} + +static struct of_device_id xgpio_of_match[] __devinitdata = { + { .compatible = "xlnx,xps-gpio-1.00.a", }, + { /* end of list */ }, +}; + +static int __init xgpio_init(void) +{ + struct device_node *np; + + for_each_matching_node(np, xgpio_of_match) + xgpio_of_probe(np); + + return 0; +} + +/* Make sure we get initialized before anyone else tries to use us */ +subsys_initcall(xgpio_init); +/* No exit call at the moment as we cannot unregister of GPIO chips */ + +MODULE_AUTHOR("Xilinx, Inc."); +MODULE_DESCRIPTION("Xilinx GPIO driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 96f416afc3f6..996097acb5e7 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -266,11 +266,19 @@ int drm_init(struct drm_driver *driver) for (i = 0; driver->pci_driver.id_table[i].vendor != 0; i++) { pid = (struct pci_device_id *)&driver->pci_driver.id_table[i]; + /* Loop around setting up a DRM device for each PCI device + * matching our ID and device class. If we had the internal + * function that pci_get_subsys and pci_get_class used, we'd + * be able to just pass pid in instead of doing a two-stage + * thing. + */ pdev = NULL; - /* pass back in pdev to account for multiple identical cards */ while ((pdev = pci_get_subsys(pid->vendor, pid->device, pid->subvendor, pid->subdevice, pdev)) != NULL) { + if ((pdev->class & pid->class_mask) != pid->class) + continue; + /* stealth mode requires a manual probe */ pci_dev_get(pdev); drm_get_dev(pdev, pid, driver); @@ -297,6 +305,8 @@ static void drm_cleanup(struct drm_device * dev) return; } + drm_vblank_cleanup(dev); + drm_lastclose(dev); if (drm_core_has_MTRR(dev) && drm_core_has_AGP(dev) && diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 212a94f715b2..1e787f894b3c 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -94,7 +94,7 @@ static void vblank_disable_fn(unsigned long arg) } } -static void drm_vblank_cleanup(struct drm_device *dev) +void drm_vblank_cleanup(struct drm_device *dev) { /* Bail if the driver didn't call drm_vblank_init() */ if (dev->num_crtcs == 0) @@ -278,10 +278,6 @@ int drm_irq_uninstall(struct drm_device * dev) free_irq(dev->pdev->irq, dev); - drm_vblank_cleanup(dev); - - dev->locked_tasklet_func = NULL; - return 0; } EXPORT_SYMBOL(drm_irq_uninstall); @@ -699,81 +695,3 @@ void drm_handle_vblank(struct drm_device *dev, int crtc) drm_vbl_send_signals(dev, crtc); } EXPORT_SYMBOL(drm_handle_vblank); - -/** - * Tasklet wrapper function. - * - * \param data DRM device in disguise. - * - * Attempts to grab the HW lock and calls the driver callback on success. On - * failure, leave the lock marked as contended so the callback can be called - * from drm_unlock(). - */ -static void drm_locked_tasklet_func(unsigned long data) -{ - struct drm_device *dev = (struct drm_device *)data; - unsigned long irqflags; - void (*tasklet_func)(struct drm_device *); - - spin_lock_irqsave(&dev->tasklet_lock, irqflags); - tasklet_func = dev->locked_tasklet_func; - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - - if (!tasklet_func || - !drm_lock_take(&dev->lock, - DRM_KERNEL_CONTEXT)) { - return; - } - - dev->lock.lock_time = jiffies; - atomic_inc(&dev->counts[_DRM_STAT_LOCKS]); - - spin_lock_irqsave(&dev->tasklet_lock, irqflags); - tasklet_func = dev->locked_tasklet_func; - dev->locked_tasklet_func = NULL; - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - - if (tasklet_func != NULL) - tasklet_func(dev); - - drm_lock_free(&dev->lock, - DRM_KERNEL_CONTEXT); -} - -/** - * Schedule a tasklet to call back a driver hook with the HW lock held. - * - * \param dev DRM device. - * \param func Driver callback. - * - * This is intended for triggering actions that require the HW lock from an - * interrupt handler. The lock will be grabbed ASAP after the interrupt handler - * completes. Note that the callback may be called from interrupt or process - * context, it must not make any assumptions about this. Also, the HW lock will - * be held with the kernel context or any client context. - */ -void drm_locked_tasklet(struct drm_device *dev, void (*func)(struct drm_device *)) -{ - unsigned long irqflags; - static DECLARE_TASKLET(drm_tasklet, drm_locked_tasklet_func, 0); - - if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ) || - test_bit(TASKLET_STATE_SCHED, &drm_tasklet.state)) - return; - - spin_lock_irqsave(&dev->tasklet_lock, irqflags); - - if (dev->locked_tasklet_func) { - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - return; - } - - dev->locked_tasklet_func = func; - - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - - drm_tasklet.data = (unsigned long)dev; - - tasklet_hi_schedule(&drm_tasklet); -} -EXPORT_SYMBOL(drm_locked_tasklet); diff --git a/drivers/gpu/drm/drm_lock.c b/drivers/gpu/drm/drm_lock.c index 888159e03d26..1cfa72031f8f 100644 --- a/drivers/gpu/drm/drm_lock.c +++ b/drivers/gpu/drm/drm_lock.c @@ -154,8 +154,6 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv) int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_lock *lock = data; - unsigned long irqflags; - void (*tasklet_func)(struct drm_device *); if (lock->context == DRM_KERNEL_CONTEXT) { DRM_ERROR("Process %d using kernel context %d\n", @@ -163,13 +161,6 @@ int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv) return -EINVAL; } - spin_lock_irqsave(&dev->tasklet_lock, irqflags); - tasklet_func = dev->locked_tasklet_func; - dev->locked_tasklet_func = NULL; - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - if (tasklet_func != NULL) - tasklet_func(dev); - atomic_inc(&dev->counts[_DRM_STAT_UNLOCKS]); /* kernel_context_switch isn't used by any of the x86 drm diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c index 141e33004a76..66c96ec66672 100644 --- a/drivers/gpu/drm/drm_stub.c +++ b/drivers/gpu/drm/drm_stub.c @@ -92,7 +92,6 @@ static int drm_fill_in_dev(struct drm_device * dev, struct pci_dev *pdev, spin_lock_init(&dev->count_lock); spin_lock_init(&dev->drw_lock); - spin_lock_init(&dev->tasklet_lock); spin_lock_init(&dev->lock.spinlock); init_timer(&dev->timer); mutex_init(&dev->struct_mutex); diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 256e22963ae4..afa8a12cd009 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -154,6 +154,9 @@ static int i915_dma_cleanup(struct drm_device * dev) if (I915_NEED_GFX_HWS(dev)) i915_free_hws(dev); + dev_priv->sarea = NULL; + dev_priv->sarea_priv = NULL; + return 0; } @@ -442,7 +445,7 @@ static void i915_emit_breadcrumb(struct drm_device *dev) BEGIN_LP_RING(4); OUT_RING(MI_STORE_DWORD_INDEX); - OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT); + OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT); OUT_RING(dev_priv->counter); OUT_RING(0); ADVANCE_LP_RING(); @@ -573,7 +576,7 @@ static int i915_dispatch_flip(struct drm_device * dev) BEGIN_LP_RING(4); OUT_RING(MI_STORE_DWORD_INDEX); - OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT); + OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT); OUT_RING(dev_priv->counter); OUT_RING(0); ADVANCE_LP_RING(); @@ -608,7 +611,6 @@ static int i915_batchbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 *hw_status = dev_priv->hw_status_page; drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *) dev_priv->sarea_priv; drm_i915_batchbuffer_t *batch = data; @@ -634,7 +636,7 @@ static int i915_batchbuffer(struct drm_device *dev, void *data, mutex_unlock(&dev->struct_mutex); if (sarea_priv) - sarea_priv->last_dispatch = (int)hw_status[5]; + sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); return ret; } @@ -642,7 +644,6 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 *hw_status = dev_priv->hw_status_page; drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *) dev_priv->sarea_priv; drm_i915_cmdbuffer_t *cmdbuf = data; @@ -670,7 +671,7 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data, } if (sarea_priv) - sarea_priv->last_dispatch = (int)hw_status[5]; + sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); return 0; } @@ -716,7 +717,7 @@ static int i915_getparam(struct drm_device *dev, void *data, value = dev->pci_device; break; case I915_PARAM_HAS_GEM: - value = 1; + value = dev_priv->has_gem; break; default: DRM_ERROR("Unknown parameter %d\n", param->param); @@ -829,6 +830,14 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) dev_priv->regs = ioremap(base, size); +#ifdef CONFIG_HIGHMEM64G + /* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */ + dev_priv->has_gem = 0; +#else + /* enable GEM by default */ + dev_priv->has_gem = 1; +#endif + i915_gem_load(dev); /* Init HWS */ @@ -846,16 +855,23 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) * and the registers being closely associated. * * According to chipset errata, on the 965GM, MSI interrupts may - * be lost or delayed + * be lost or delayed, but we use them anyways to avoid + * stuck interrupts on some machines. */ - if (!IS_I945G(dev) && !IS_I945GM(dev) && !IS_I965GM(dev)) - if (pci_enable_msi(dev->pdev)) - DRM_ERROR("failed to enable MSI\n"); + if (!IS_I945G(dev) && !IS_I945GM(dev)) + pci_enable_msi(dev->pdev); intel_opregion_init(dev); spin_lock_init(&dev_priv->user_irq_lock); + ret = drm_vblank_init(dev, I915_NUM_PIPE); + + if (ret) { + (void) i915_driver_unload(dev); + return ret; + } + return ret; } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 572dcd0e3e0d..b3cc4731aa7c 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -47,6 +47,8 @@ enum pipe { PIPE_B, }; +#define I915_NUM_PIPE 2 + /* Interface history: * * 1.1: Original. @@ -88,13 +90,6 @@ struct mem_block { struct drm_file *file_priv; /* NULL: free, -1: heap, other: real files */ }; -typedef struct _drm_i915_vbl_swap { - struct list_head head; - drm_drawable_t drw_id; - unsigned int pipe; - unsigned int sequence; -} drm_i915_vbl_swap_t; - struct opregion_header; struct opregion_acpi; struct opregion_swsci; @@ -111,6 +106,8 @@ struct intel_opregion { typedef struct drm_i915_private { struct drm_device *dev; + int has_gem; + void __iomem *regs; drm_local_map_t *sarea; @@ -139,6 +136,7 @@ typedef struct drm_i915_private { int user_irq_refcount; /** Cached value of IMR to avoid reads in updating the bitfield */ u32 irq_mask_reg; + u32 pipestat[2]; int tex_lru_log_granularity; int allow_batchbuffer; @@ -146,10 +144,6 @@ typedef struct drm_i915_private { unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds; int vblank_pipe; - spinlock_t swaps_lock; - drm_i915_vbl_swap_t vbl_swaps; - unsigned int swaps_pending; - struct intel_opregion opregion; /* Register state */ @@ -157,6 +151,8 @@ typedef struct drm_i915_private { u32 saveDSPACNTR; u32 saveDSPBCNTR; u32 saveDSPARB; + u32 saveRENDERSTANDBY; + u32 saveHWS; u32 savePIPEACONF; u32 savePIPEBCONF; u32 savePIPEASRC; @@ -241,9 +237,6 @@ typedef struct drm_i915_private { u8 saveDACDATA[256*3]; /* 256 3-byte colors */ u8 saveCR[37]; - /** Work task for vblank-related ring access */ - struct work_struct vblank_work; - struct { struct drm_mm gtt_space; @@ -253,6 +246,10 @@ typedef struct drm_i915_private { * List of objects currently involved in rendering from the * ringbuffer. * + * Includes buffers having the contents of their GPU caches + * flushed, not necessarily primitives. last_rendering_seqno + * represents when the rendering involved will be completed. + * * A reference is held on the buffer while on this list. */ struct list_head active_list; @@ -262,6 +259,8 @@ typedef struct drm_i915_private { * still have a write_domain which needs to be flushed before * unbinding. * + * last_rendering_seqno is 0 while an object is in this list. + * * A reference is held on the buffer while on this list. */ struct list_head flushing_list; @@ -270,6 +269,8 @@ typedef struct drm_i915_private { * LRU list of objects which are not in the ringbuffer and * are ready to unbind, but are still in the GTT. * + * last_rendering_seqno is 0 while an object is in this list. + * * A reference is not held on the buffer while on this list, * as merely being GTT-bound shouldn't prevent its being * freed, and we'll pull it off the list in the free path. @@ -380,8 +381,8 @@ struct drm_i915_gem_object { uint32_t agp_type; /** - * Flagging of which individual pages are valid in GEM_DOMAIN_CPU when - * GEM_DOMAIN_CPU is not in the object's read domain. + * If present, while GEM_DOMAIN_CPU is in the read domain this array + * flags which individual pages are valid. */ uint8_t *page_cpu_valid; }; @@ -403,9 +404,6 @@ struct drm_i915_gem_request { /** Time at which this request was emitted, in jiffies. */ unsigned long emitted_jiffies; - /** Cache domains that were flushed at the start of the request. */ - uint32_t flush_domains; - struct list_head list; }; @@ -444,7 +442,6 @@ extern int i915_irq_wait(struct drm_device *dev, void *data, void i915_user_irq_get(struct drm_device *dev); void i915_user_irq_put(struct drm_device *dev); -extern void i915_vblank_work_handler(struct work_struct *work); extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS); extern void i915_driver_irq_preinstall(struct drm_device * dev); extern int i915_driver_irq_postinstall(struct drm_device *dev); @@ -460,6 +457,13 @@ extern int i915_vblank_swap(struct drm_device *dev, void *data, struct drm_file *file_priv); extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask); +void +i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask); + +void +i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask); + + /* i915_mem.c */ extern int i915_mem_alloc(struct drm_device *dev, void *data, struct drm_file *file_priv); @@ -622,8 +626,9 @@ static inline void opregion_enable_asle(struct drm_device *dev) { return; } * The area from dword 0x20 to 0x3ff is available for driver usage. */ #define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg]) -#define READ_BREADCRUMB(dev_priv) READ_HWSP(dev_priv, 5) +#define READ_BREADCRUMB(dev_priv) READ_HWSP(dev_priv, I915_BREADCRUMB_INDEX) #define I915_GEM_HWS_INDEX 0x20 +#define I915_BREADCRUMB_INDEX 0x21 extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index b0ec73fa6a93..24fe8c10b4b2 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -31,21 +31,23 @@ #include "i915_drv.h" #include <linux/swap.h> -static int -i915_gem_object_set_domain(struct drm_gem_object *obj, - uint32_t read_domains, - uint32_t write_domain); -static int -i915_gem_object_set_domain_range(struct drm_gem_object *obj, - uint64_t offset, - uint64_t size, - uint32_t read_domains, - uint32_t write_domain); -static int -i915_gem_set_domain(struct drm_gem_object *obj, - struct drm_file *file_priv, - uint32_t read_domains, - uint32_t write_domain); +#define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) + +static void +i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, + uint32_t read_domains, + uint32_t write_domain); +static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj); +static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj); +static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj); +static int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, + int write); +static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, + int write); +static int i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, + uint64_t offset, + uint64_t size); +static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj); static int i915_gem_object_get_page_list(struct drm_gem_object *obj); static void i915_gem_object_free_page_list(struct drm_gem_object *obj); static int i915_gem_object_wait_rendering(struct drm_gem_object *obj); @@ -83,20 +85,14 @@ int i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { - drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_get_aperture *args = data; - struct drm_i915_gem_object *obj_priv; if (!(dev->driver->driver_features & DRIVER_GEM)) return -ENODEV; args->aper_size = dev->gtt_total; - args->aper_available_size = args->aper_size; - - list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) { - if (obj_priv->pin_count > 0) - args->aper_available_size -= obj_priv->obj->size; - } + args->aper_available_size = (args->aper_size - + atomic_read(&dev->pin_memory)); return 0; } @@ -166,8 +162,8 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data, mutex_lock(&dev->struct_mutex); - ret = i915_gem_object_set_domain_range(obj, args->offset, args->size, - I915_GEM_DOMAIN_CPU, 0); + ret = i915_gem_object_set_cpu_read_domain_range(obj, args->offset, + args->size); if (ret != 0) { drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); @@ -264,8 +260,7 @@ i915_gem_gtt_pwrite(struct drm_device *dev, struct drm_gem_object *obj, mutex_unlock(&dev->struct_mutex); return ret; } - ret = i915_gem_set_domain(obj, file_priv, - I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT); + ret = i915_gem_object_set_to_gtt_domain(obj, 1); if (ret) goto fail; @@ -324,8 +319,7 @@ i915_gem_shmem_pwrite(struct drm_device *dev, struct drm_gem_object *obj, mutex_lock(&dev->struct_mutex); - ret = i915_gem_set_domain(obj, file_priv, - I915_GEM_DOMAIN_CPU, I915_GEM_DOMAIN_CPU); + ret = i915_gem_object_set_to_cpu_domain(obj, 1); if (ret) { mutex_unlock(&dev->struct_mutex); return ret; @@ -401,7 +395,8 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, } /** - * Called when user space prepares to use an object + * Called when user space prepares to use an object with the CPU, either + * through the mmap ioctl's mapping or a GTT mapping. */ int i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, @@ -409,11 +404,26 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, { struct drm_i915_gem_set_domain *args = data; struct drm_gem_object *obj; + uint32_t read_domains = args->read_domains; + uint32_t write_domain = args->write_domain; int ret; if (!(dev->driver->driver_features & DRIVER_GEM)) return -ENODEV; + /* Only handle setting domains to types used by the CPU. */ + if (write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) + return -EINVAL; + + if (read_domains & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) + return -EINVAL; + + /* Having something in the write domain implies it's in the read + * domain, and only that read domain. Enforce that in the request. + */ + if (write_domain != 0 && read_domains != write_domain) + return -EINVAL; + obj = drm_gem_object_lookup(dev, file_priv, args->handle); if (obj == NULL) return -EBADF; @@ -421,10 +431,21 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, mutex_lock(&dev->struct_mutex); #if WATCH_BUF DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n", - obj, obj->size, args->read_domains, args->write_domain); + obj, obj->size, read_domains, write_domain); #endif - ret = i915_gem_set_domain(obj, file_priv, - args->read_domains, args->write_domain); + if (read_domains & I915_GEM_DOMAIN_GTT) { + ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0); + + /* Silently promote "you're not bound, there was nothing to do" + * to success, since the client was just asking us to + * make sure everything was done. + */ + if (ret == -EINVAL) + ret = 0; + } else { + ret = i915_gem_object_set_to_cpu_domain(obj, write_domain != 0); + } + drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return ret; @@ -459,10 +480,9 @@ i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data, obj_priv = obj->driver_private; /* Pinned buffers may be scanout, so flush the cache */ - if ((obj->write_domain & I915_GEM_DOMAIN_CPU) && obj_priv->pin_count) { - i915_gem_clflush_object(obj); - drm_agp_chipset_flush(dev); - } + if (obj_priv->pin_count) + i915_gem_object_flush_cpu_write_domain(obj); + drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return ret; @@ -536,7 +556,7 @@ i915_gem_object_free_page_list(struct drm_gem_object *obj) } static void -i915_gem_object_move_to_active(struct drm_gem_object *obj) +i915_gem_object_move_to_active(struct drm_gem_object *obj, uint32_t seqno) { struct drm_device *dev = obj->dev; drm_i915_private_t *dev_priv = dev->dev_private; @@ -550,8 +570,20 @@ i915_gem_object_move_to_active(struct drm_gem_object *obj) /* Move from whatever list we were on to the tail of execution. */ list_move_tail(&obj_priv->list, &dev_priv->mm.active_list); + obj_priv->last_rendering_seqno = seqno; } +static void +i915_gem_object_move_to_flushing(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + BUG_ON(!obj_priv->active); + list_move_tail(&obj_priv->list, &dev_priv->mm.flushing_list); + obj_priv->last_rendering_seqno = 0; +} static void i915_gem_object_move_to_inactive(struct drm_gem_object *obj) @@ -566,6 +598,7 @@ i915_gem_object_move_to_inactive(struct drm_gem_object *obj) else list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list); + obj_priv->last_rendering_seqno = 0; if (obj_priv->active) { obj_priv->active = 0; drm_gem_object_unreference(obj); @@ -614,10 +647,28 @@ i915_add_request(struct drm_device *dev, uint32_t flush_domains) request->seqno = seqno; request->emitted_jiffies = jiffies; - request->flush_domains = flush_domains; was_empty = list_empty(&dev_priv->mm.request_list); list_add_tail(&request->list, &dev_priv->mm.request_list); + /* Associate any objects on the flushing list matching the write + * domain we're flushing with our flush. + */ + if (flush_domains != 0) { + struct drm_i915_gem_object *obj_priv, *next; + + list_for_each_entry_safe(obj_priv, next, + &dev_priv->mm.flushing_list, list) { + struct drm_gem_object *obj = obj_priv->obj; + + if ((obj->write_domain & flush_domains) == + obj->write_domain) { + obj->write_domain = 0; + i915_gem_object_move_to_active(obj, seqno); + } + } + + } + if (was_empty && !dev_priv->mm.suspended) schedule_delayed_work(&dev_priv->mm.retire_work, HZ); return seqno; @@ -680,30 +731,10 @@ i915_gem_retire_request(struct drm_device *dev, __func__, request->seqno, obj); #endif - if (obj->write_domain != 0) { - list_move_tail(&obj_priv->list, - &dev_priv->mm.flushing_list); - } else { + if (obj->write_domain != 0) + i915_gem_object_move_to_flushing(obj); + else i915_gem_object_move_to_inactive(obj); - } - } - - if (request->flush_domains != 0) { - struct drm_i915_gem_object *obj_priv, *next; - - /* Clear the write domain and activity from any buffers - * that are just waiting for a flush matching the one retired. - */ - list_for_each_entry_safe(obj_priv, next, - &dev_priv->mm.flushing_list, list) { - struct drm_gem_object *obj = obj_priv->obj; - - if (obj->write_domain & request->flush_domains) { - obj->write_domain = 0; - i915_gem_object_move_to_inactive(obj); - } - } - } } @@ -896,25 +927,10 @@ i915_gem_object_wait_rendering(struct drm_gem_object *obj) struct drm_i915_gem_object *obj_priv = obj->driver_private; int ret; - /* If there are writes queued to the buffer, flush and - * create a new seqno to wait for. + /* This function only exists to support waiting for existing rendering, + * not for emitting required flushes. */ - if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) { - uint32_t write_domain = obj->write_domain; -#if WATCH_BUF - DRM_INFO("%s: flushing object %p from write domain %08x\n", - __func__, obj, write_domain); -#endif - i915_gem_flush(dev, 0, write_domain); - - i915_gem_object_move_to_active(obj); - obj_priv->last_rendering_seqno = i915_add_request(dev, - write_domain); - BUG_ON(obj_priv->last_rendering_seqno == 0); -#if WATCH_LRU - DRM_INFO("%s: flush moves to exec list %p\n", __func__, obj); -#endif - } + BUG_ON((obj->write_domain & I915_GEM_GPU_DOMAINS) != 0); /* If there is rendering queued on the buffer being evicted, wait for * it. @@ -954,24 +970,16 @@ i915_gem_object_unbind(struct drm_gem_object *obj) return -EINVAL; } - /* Wait for any rendering to complete - */ - ret = i915_gem_object_wait_rendering(obj); - if (ret) { - DRM_ERROR("wait_rendering failed: %d\n", ret); - return ret; - } - /* Move the object to the CPU domain to ensure that * any possible CPU writes while it's not in the GTT * are flushed when we go to remap it. This will * also ensure that all pending GPU writes are finished * before we unbind. */ - ret = i915_gem_object_set_domain(obj, I915_GEM_DOMAIN_CPU, - I915_GEM_DOMAIN_CPU); + ret = i915_gem_object_set_to_cpu_domain(obj, 1); if (ret) { - DRM_ERROR("set_domain failed: %d\n", ret); + if (ret != -ERESTARTSYS) + DRM_ERROR("set_domain failed: %d\n", ret); return ret; } @@ -1087,6 +1095,21 @@ i915_gem_evict_something(struct drm_device *dev) } static int +i915_gem_evict_everything(struct drm_device *dev) +{ + int ret; + + for (;;) { + ret = i915_gem_evict_something(dev); + if (ret != 0) + break; + } + if (ret == -ENOMEM) + return 0; + return ret; +} + +static int i915_gem_object_get_page_list(struct drm_gem_object *obj) { struct drm_i915_gem_object *obj_priv = obj->driver_private; @@ -1172,7 +1195,8 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) ret = i915_gem_evict_something(dev); if (ret != 0) { - DRM_ERROR("Failed to evict a buffer %d\n", ret); + if (ret != -ERESTARTSYS) + DRM_ERROR("Failed to evict a buffer %d\n", ret); return ret; } goto search_free; @@ -1232,6 +1256,143 @@ i915_gem_clflush_object(struct drm_gem_object *obj) drm_clflush_pages(obj_priv->page_list, obj->size / PAGE_SIZE); } +/** Flushes any GPU write domain for the object if it's dirty. */ +static void +i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + uint32_t seqno; + + if ((obj->write_domain & I915_GEM_GPU_DOMAINS) == 0) + return; + + /* Queue the GPU write cache flushing we need. */ + i915_gem_flush(dev, 0, obj->write_domain); + seqno = i915_add_request(dev, obj->write_domain); + obj->write_domain = 0; + i915_gem_object_move_to_active(obj, seqno); +} + +/** Flushes the GTT write domain for the object if it's dirty. */ +static void +i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj) +{ + if (obj->write_domain != I915_GEM_DOMAIN_GTT) + return; + + /* No actual flushing is required for the GTT write domain. Writes + * to it immediately go to main memory as far as we know, so there's + * no chipset flush. It also doesn't land in render cache. + */ + obj->write_domain = 0; +} + +/** Flushes the CPU write domain for the object if it's dirty. */ +static void +i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + + if (obj->write_domain != I915_GEM_DOMAIN_CPU) + return; + + i915_gem_clflush_object(obj); + drm_agp_chipset_flush(dev); + obj->write_domain = 0; +} + +/** + * Moves a single object to the GTT read, and possibly write domain. + * + * This function returns when the move is complete, including waiting on + * flushes to occur. + */ +static int +i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int ret; + + /* Not valid to be called on unbound objects. */ + if (obj_priv->gtt_space == NULL) + return -EINVAL; + + i915_gem_object_flush_gpu_write_domain(obj); + /* Wait on any GPU rendering and flushing to occur. */ + ret = i915_gem_object_wait_rendering(obj); + if (ret != 0) + return ret; + + /* If we're writing through the GTT domain, then CPU and GPU caches + * will need to be invalidated at next use. + */ + if (write) + obj->read_domains &= I915_GEM_DOMAIN_GTT; + + i915_gem_object_flush_cpu_write_domain(obj); + + /* It should now be out of any other write domains, and we can update + * the domain values for our changes. + */ + BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0); + obj->read_domains |= I915_GEM_DOMAIN_GTT; + if (write) { + obj->write_domain = I915_GEM_DOMAIN_GTT; + obj_priv->dirty = 1; + } + + return 0; +} + +/** + * Moves a single object to the CPU read, and possibly write domain. + * + * This function returns when the move is complete, including waiting on + * flushes to occur. + */ +static int +i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write) +{ + struct drm_device *dev = obj->dev; + int ret; + + i915_gem_object_flush_gpu_write_domain(obj); + /* Wait on any GPU rendering and flushing to occur. */ + ret = i915_gem_object_wait_rendering(obj); + if (ret != 0) + return ret; + + i915_gem_object_flush_gtt_write_domain(obj); + + /* If we have a partially-valid cache of the object in the CPU, + * finish invalidating it and free the per-page flags. + */ + i915_gem_object_set_to_full_cpu_read_domain(obj); + + /* Flush the CPU cache if it's still invalid. */ + if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) { + i915_gem_clflush_object(obj); + drm_agp_chipset_flush(dev); + + obj->read_domains |= I915_GEM_DOMAIN_CPU; + } + + /* It should now be out of any other write domains, and we can update + * the domain values for our changes. + */ + BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0); + + /* If we're writing through the CPU, then the GPU read domains will + * need to be invalidated at next use. + */ + if (write) { + obj->read_domains &= I915_GEM_DOMAIN_CPU; + obj->write_domain = I915_GEM_DOMAIN_CPU; + } + + return 0; +} + /* * Set the next domain for the specified object. This * may not actually perform the necessary flushing/invaliding though, @@ -1343,16 +1504,18 @@ i915_gem_clflush_object(struct drm_gem_object *obj) * MI_FLUSH * drm_agp_chipset_flush */ -static int -i915_gem_object_set_domain(struct drm_gem_object *obj, - uint32_t read_domains, - uint32_t write_domain) +static void +i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, + uint32_t read_domains, + uint32_t write_domain) { struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; uint32_t invalidate_domains = 0; uint32_t flush_domains = 0; - int ret; + + BUG_ON(read_domains & I915_GEM_DOMAIN_CPU); + BUG_ON(write_domain == I915_GEM_DOMAIN_CPU); #if WATCH_BUF DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n", @@ -1389,34 +1552,11 @@ i915_gem_object_set_domain(struct drm_gem_object *obj, DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n", __func__, flush_domains, invalidate_domains); #endif - /* - * If we're invaliding the CPU cache and flushing a GPU cache, - * then pause for rendering so that the GPU caches will be - * flushed before the cpu cache is invalidated - */ - if ((invalidate_domains & I915_GEM_DOMAIN_CPU) && - (flush_domains & ~(I915_GEM_DOMAIN_CPU | - I915_GEM_DOMAIN_GTT))) { - ret = i915_gem_object_wait_rendering(obj); - if (ret) - return ret; - } i915_gem_clflush_object(obj); } if ((write_domain | flush_domains) != 0) obj->write_domain = write_domain; - - /* If we're invalidating the CPU domain, clear the per-page CPU - * domain list as well. - */ - if (obj_priv->page_cpu_valid != NULL && - (write_domain != 0 || - read_domains & I915_GEM_DOMAIN_CPU)) { - drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE, - DRM_MEM_DRIVER); - obj_priv->page_cpu_valid = NULL; - } obj->read_domains = read_domains; dev->invalidate_domains |= invalidate_domains; @@ -1427,49 +1567,94 @@ i915_gem_object_set_domain(struct drm_gem_object *obj, obj->read_domains, obj->write_domain, dev->invalidate_domains, dev->flush_domains); #endif - return 0; } /** - * Set the read/write domain on a range of the object. + * Moves the object from a partially CPU read to a full one. * - * Currently only implemented for CPU reads, otherwise drops to normal - * i915_gem_object_set_domain(). + * Note that this only resolves i915_gem_object_set_cpu_read_domain_range(), + * and doesn't handle transitioning from !(read_domains & I915_GEM_DOMAIN_CPU). */ -static int -i915_gem_object_set_domain_range(struct drm_gem_object *obj, - uint64_t offset, - uint64_t size, - uint32_t read_domains, - uint32_t write_domain) +static void +i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj) { + struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; - int ret, i; - if (obj->read_domains & I915_GEM_DOMAIN_CPU) - return 0; + if (!obj_priv->page_cpu_valid) + return; - if (read_domains != I915_GEM_DOMAIN_CPU || - write_domain != 0) - return i915_gem_object_set_domain(obj, - read_domains, write_domain); + /* If we're partially in the CPU read domain, finish moving it in. + */ + if (obj->read_domains & I915_GEM_DOMAIN_CPU) { + int i; - /* Wait on any GPU rendering to the object to be flushed. */ - if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) { - ret = i915_gem_object_wait_rendering(obj); - if (ret) - return ret; + for (i = 0; i <= (obj->size - 1) / PAGE_SIZE; i++) { + if (obj_priv->page_cpu_valid[i]) + continue; + drm_clflush_pages(obj_priv->page_list + i, 1); + } + drm_agp_chipset_flush(dev); } + /* Free the page_cpu_valid mappings which are now stale, whether + * or not we've got I915_GEM_DOMAIN_CPU. + */ + drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE, + DRM_MEM_DRIVER); + obj_priv->page_cpu_valid = NULL; +} + +/** + * Set the CPU read domain on a range of the object. + * + * The object ends up with I915_GEM_DOMAIN_CPU in its read flags although it's + * not entirely valid. The page_cpu_valid member of the object flags which + * pages have been flushed, and will be respected by + * i915_gem_object_set_to_cpu_domain() if it's called on to get a valid mapping + * of the whole object. + * + * This function returns when the move is complete, including waiting on + * flushes to occur. + */ +static int +i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, + uint64_t offset, uint64_t size) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int i, ret; + + if (offset == 0 && size == obj->size) + return i915_gem_object_set_to_cpu_domain(obj, 0); + + i915_gem_object_flush_gpu_write_domain(obj); + /* Wait on any GPU rendering and flushing to occur. */ + ret = i915_gem_object_wait_rendering(obj); + if (ret != 0) + return ret; + i915_gem_object_flush_gtt_write_domain(obj); + + /* If we're already fully in the CPU read domain, we're done. */ + if (obj_priv->page_cpu_valid == NULL && + (obj->read_domains & I915_GEM_DOMAIN_CPU) != 0) + return 0; + + /* Otherwise, create/clear the per-page CPU read domain flag if we're + * newly adding I915_GEM_DOMAIN_CPU + */ if (obj_priv->page_cpu_valid == NULL) { obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE, DRM_MEM_DRIVER); - } + if (obj_priv->page_cpu_valid == NULL) + return -ENOMEM; + } else if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) + memset(obj_priv->page_cpu_valid, 0, obj->size / PAGE_SIZE); /* Flush the cache on any pages that are still invalid from the CPU's * perspective. */ - for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; i++) { + for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; + i++) { if (obj_priv->page_cpu_valid[i]) continue; @@ -1478,39 +1663,14 @@ i915_gem_object_set_domain_range(struct drm_gem_object *obj, obj_priv->page_cpu_valid[i] = 1; } - return 0; -} - -/** - * Once all of the objects have been set in the proper domain, - * perform the necessary flush and invalidate operations. - * - * Returns the write domains flushed, for use in flush tracking. - */ -static uint32_t -i915_gem_dev_set_domain(struct drm_device *dev) -{ - uint32_t flush_domains = dev->flush_domains; - - /* - * Now that all the buffers are synced to the proper domains, - * flush and invalidate the collected domains + /* It should now be out of any other write domains, and we can update + * the domain values for our changes. */ - if (dev->invalidate_domains | dev->flush_domains) { -#if WATCH_EXEC - DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n", - __func__, - dev->invalidate_domains, - dev->flush_domains); -#endif - i915_gem_flush(dev, - dev->invalidate_domains, - dev->flush_domains); - dev->invalidate_domains = 0; - dev->flush_domains = 0; - } + BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0); - return flush_domains; + obj->read_domains |= I915_GEM_DOMAIN_CPU; + + return 0; } /** @@ -1591,6 +1751,18 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, return -EINVAL; } + if (reloc.write_domain & I915_GEM_DOMAIN_CPU || + reloc.read_domains & I915_GEM_DOMAIN_CPU) { + DRM_ERROR("reloc with read/write CPU domains: " + "obj %p target %d offset %d " + "read %08x write %08x", + obj, reloc.target_handle, + (int) reloc.offset, + reloc.read_domains, + reloc.write_domain); + return -EINVAL; + } + if (reloc.write_domain && target_obj->pending_write_domain && reloc.write_domain != target_obj->pending_write_domain) { DRM_ERROR("Write domain conflict: " @@ -1631,19 +1803,11 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, continue; } - /* Now that we're going to actually write some data in, - * make sure that any rendering using this buffer's contents - * is completed. - */ - i915_gem_object_wait_rendering(obj); - - /* As we're writing through the gtt, flush - * any CPU writes before we write the relocations - */ - if (obj->write_domain & I915_GEM_DOMAIN_CPU) { - i915_gem_clflush_object(obj); - drm_agp_chipset_flush(dev); - obj->write_domain = 0; + ret = i915_gem_object_set_to_gtt_domain(obj, 1); + if (ret != 0) { + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); + return -EINVAL; } /* Map the page containing the relocation we're going to @@ -1785,6 +1949,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, int ret, i, pinned = 0; uint64_t exec_offset; uint32_t seqno, flush_domains; + int pin_tries; #if WATCH_EXEC DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n", @@ -1833,14 +1998,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, return -EBUSY; } - /* Zero the gloabl flush/invalidate flags. These - * will be modified as each object is bound to the - * gtt - */ - dev->invalidate_domains = 0; - dev->flush_domains = 0; - - /* Look up object handles and perform the relocations */ + /* Look up object handles */ for (i = 0; i < args->buffer_count; i++) { object_list[i] = drm_gem_object_lookup(dev, file_priv, exec_list[i].handle); @@ -1850,17 +2008,39 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, ret = -EBADF; goto err; } + } - object_list[i]->pending_read_domains = 0; - object_list[i]->pending_write_domain = 0; - ret = i915_gem_object_pin_and_relocate(object_list[i], - file_priv, - &exec_list[i]); - if (ret) { - DRM_ERROR("object bind and relocate failed %d\n", ret); + /* Pin and relocate */ + for (pin_tries = 0; ; pin_tries++) { + ret = 0; + for (i = 0; i < args->buffer_count; i++) { + object_list[i]->pending_read_domains = 0; + object_list[i]->pending_write_domain = 0; + ret = i915_gem_object_pin_and_relocate(object_list[i], + file_priv, + &exec_list[i]); + if (ret) + break; + pinned = i + 1; + } + /* success */ + if (ret == 0) + break; + + /* error other than GTT full, or we've already tried again */ + if (ret != -ENOMEM || pin_tries >= 1) { + DRM_ERROR("Failed to pin buffers %d\n", ret); goto err; } - pinned = i + 1; + + /* unpin all of our buffers */ + for (i = 0; i < pinned; i++) + i915_gem_object_unpin(object_list[i]); + + /* evict everyone we can from the aperture */ + ret = i915_gem_evict_everything(dev); + if (ret) + goto err; } /* Set the pending read domains for the batch buffer to COMMAND */ @@ -1870,32 +2050,37 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, i915_verify_inactive(dev, __FILE__, __LINE__); + /* Zero the global flush/invalidate flags. These + * will be modified as new domains are computed + * for each object + */ + dev->invalidate_domains = 0; + dev->flush_domains = 0; + for (i = 0; i < args->buffer_count; i++) { struct drm_gem_object *obj = object_list[i]; - struct drm_i915_gem_object *obj_priv = obj->driver_private; - if (obj_priv->gtt_space == NULL) { - /* We evicted the buffer in the process of validating - * our set of buffers in. We could try to recover by - * kicking them everything out and trying again from - * the start. - */ - ret = -ENOMEM; - goto err; - } - - /* make sure all previous memory operations have passed */ - ret = i915_gem_object_set_domain(obj, - obj->pending_read_domains, - obj->pending_write_domain); - if (ret) - goto err; + /* Compute new gpu domains and update invalidate/flush */ + i915_gem_object_set_to_gpu_domain(obj, + obj->pending_read_domains, + obj->pending_write_domain); } i915_verify_inactive(dev, __FILE__, __LINE__); - /* Flush/invalidate caches and chipset buffer */ - flush_domains = i915_gem_dev_set_domain(dev); + if (dev->invalidate_domains | dev->flush_domains) { +#if WATCH_EXEC + DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n", + __func__, + dev->invalidate_domains, + dev->flush_domains); +#endif + i915_gem_flush(dev, + dev->invalidate_domains, + dev->flush_domains); + if (dev->flush_domains) + (void)i915_add_request(dev, dev->flush_domains); + } i915_verify_inactive(dev, __FILE__, __LINE__); @@ -1915,8 +2100,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, ~0); #endif - (void)i915_add_request(dev, flush_domains); - /* Exec the batchbuffer */ ret = i915_dispatch_gem_execbuffer(dev, args, exec_offset); if (ret) { @@ -1944,10 +2127,8 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, i915_file_priv->mm.last_gem_seqno = seqno; for (i = 0; i < args->buffer_count; i++) { struct drm_gem_object *obj = object_list[i]; - struct drm_i915_gem_object *obj_priv = obj->driver_private; - i915_gem_object_move_to_active(obj); - obj_priv->last_rendering_seqno = seqno; + i915_gem_object_move_to_active(obj, seqno); #if WATCH_LRU DRM_INFO("%s: move to exec list %p\n", __func__, obj); #endif @@ -2078,11 +2259,7 @@ i915_gem_pin_ioctl(struct drm_device *dev, void *data, /* XXX - flush the CPU caches for pinned objects * as the X server doesn't manage domains yet */ - if (obj->write_domain & I915_GEM_DOMAIN_CPU) { - i915_gem_clflush_object(obj); - drm_agp_chipset_flush(dev); - obj->write_domain = 0; - } + i915_gem_object_flush_cpu_write_domain(obj); args->offset = obj_priv->gtt_offset; drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); @@ -2132,7 +2309,14 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data, } obj_priv = obj->driver_private; - args->busy = obj_priv->active; + /* Don't count being on the flushing list against the object being + * done. Otherwise, a buffer left on the flushing list but not getting + * flushed (because nobody's flushing that domain) won't ever return + * unbusy and get reused by libdrm's bo cache. The other expected + * consumer of this interface, OpenGL's occlusion queries, also specs + * that the objects get unbusy "eventually" without any interference. + */ + args->busy = obj_priv->active && obj_priv->last_rendering_seqno != 0; drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); @@ -2184,29 +2368,6 @@ void i915_gem_free_object(struct drm_gem_object *obj) drm_free(obj->driver_private, 1, DRM_MEM_DRIVER); } -static int -i915_gem_set_domain(struct drm_gem_object *obj, - struct drm_file *file_priv, - uint32_t read_domains, - uint32_t write_domain) -{ - struct drm_device *dev = obj->dev; - int ret; - uint32_t flush_domains; - - BUG_ON(!mutex_is_locked(&dev->struct_mutex)); - - ret = i915_gem_object_set_domain(obj, read_domains, write_domain); - if (ret) - return ret; - flush_domains = i915_gem_dev_set_domain(obj->dev); - - if (flush_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) - (void) i915_add_request(dev, flush_domains); - - return 0; -} - /** Unbinds all objects that are on the given buffer list. */ static int i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head) @@ -2301,29 +2462,52 @@ i915_gem_idle(struct drm_device *dev) i915_gem_retire_requests(dev); - /* Active and flushing should now be empty as we've - * waited for a sequence higher than any pending execbuffer - */ - BUG_ON(!list_empty(&dev_priv->mm.active_list)); - BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); + if (!dev_priv->mm.wedged) { + /* Active and flushing should now be empty as we've + * waited for a sequence higher than any pending execbuffer + */ + WARN_ON(!list_empty(&dev_priv->mm.active_list)); + WARN_ON(!list_empty(&dev_priv->mm.flushing_list)); + /* Request should now be empty as we've also waited + * for the last request in the list + */ + WARN_ON(!list_empty(&dev_priv->mm.request_list)); + } - /* Request should now be empty as we've also waited - * for the last request in the list + /* Empty the active and flushing lists to inactive. If there's + * anything left at this point, it means that we're wedged and + * nothing good's going to happen by leaving them there. So strip + * the GPU domains and just stuff them onto inactive. */ - BUG_ON(!list_empty(&dev_priv->mm.request_list)); + while (!list_empty(&dev_priv->mm.active_list)) { + struct drm_i915_gem_object *obj_priv; + + obj_priv = list_first_entry(&dev_priv->mm.active_list, + struct drm_i915_gem_object, + list); + obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS; + i915_gem_object_move_to_inactive(obj_priv->obj); + } + + while (!list_empty(&dev_priv->mm.flushing_list)) { + struct drm_i915_gem_object *obj_priv; - /* Move all buffers out of the GTT. */ + obj_priv = list_first_entry(&dev_priv->mm.flushing_list, + struct drm_i915_gem_object, + list); + obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS; + i915_gem_object_move_to_inactive(obj_priv->obj); + } + + + /* Move all inactive buffers out of the GTT. */ ret = i915_gem_evict_from_list(dev, &dev_priv->mm.inactive_list); + WARN_ON(!list_empty(&dev_priv->mm.inactive_list)); if (ret) { mutex_unlock(&dev->struct_mutex); return ret; } - BUG_ON(!list_empty(&dev_priv->mm.active_list)); - BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); - BUG_ON(!list_empty(&dev_priv->mm.inactive_list)); - BUG_ON(!list_empty(&dev_priv->mm.request_list)); - i915_gem_cleanup_ringbuffer(dev); mutex_unlock(&dev->struct_mutex); diff --git a/drivers/gpu/drm/i915/i915_gem_proc.c b/drivers/gpu/drm/i915/i915_gem_proc.c index 93de15b4c9a7..e8d5abe1250e 100644 --- a/drivers/gpu/drm/i915/i915_gem_proc.c +++ b/drivers/gpu/drm/i915/i915_gem_proc.c @@ -166,10 +166,9 @@ static int i915_gem_request_info(char *buf, char **start, off_t offset, list_for_each_entry(gem_request, &dev_priv->mm.request_list, list) { - DRM_PROC_PRINT(" %d @ %d %08x\n", + DRM_PROC_PRINT(" %d @ %d\n", gem_request->seqno, - (int) (jiffies - gem_request->emitted_jiffies), - gem_request->flush_domains); + (int) (jiffies - gem_request->emitted_jiffies)); } if (len > request + offset) return request; diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index e8b85ac4ca04..a8cb69469c64 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -119,9 +119,10 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev) dcc & DCC_CHANNEL_XOR_DISABLE) { swizzle_x = I915_BIT_6_SWIZZLE_9_10; swizzle_y = I915_BIT_6_SWIZZLE_9; - } else if (IS_I965GM(dev) || IS_GM45(dev)) { - /* GM965 only does bit 11-based channel - * randomization + } else if ((IS_I965GM(dev) || IS_GM45(dev)) && + (dcc & DCC_CHANNEL_XOR_BIT_17) == 0) { + /* GM965/GM45 does either bit 11 or bit 17 + * swizzling. */ swizzle_x = I915_BIT_6_SWIZZLE_9_10_11; swizzle_y = I915_BIT_6_SWIZZLE_9_11; diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 26f48932a51e..69b9a42da95e 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -33,11 +33,23 @@ #define MAX_NOPID ((u32)~0) -/** These are the interrupts used by the driver */ -#define I915_INTERRUPT_ENABLE_MASK (I915_USER_INTERRUPT | \ - I915_ASLE_INTERRUPT | \ - I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \ - I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) +/** + * Interrupts that are always left unmasked. + * + * Since pipe events are edge-triggered from the PIPESTAT register to IIR, + * we leave them always unmasked in IMR and then control enabling them through + * PIPESTAT alone. + */ +#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \ + I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \ + I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) + +/** Interrupts that we mask and unmask at runtime. */ +#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT) + +/** These are all of the interrupts used by the driver */ +#define I915_INTERRUPT_ENABLE_MASK (I915_INTERRUPT_ENABLE_FIX | \ + I915_INTERRUPT_ENABLE_VAR) void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask) @@ -59,6 +71,41 @@ i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask) } } +static inline u32 +i915_pipestat(int pipe) +{ + if (pipe == 0) + return PIPEASTAT; + if (pipe == 1) + return PIPEBSTAT; + BUG(); +} + +void +i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask) +{ + if ((dev_priv->pipestat[pipe] & mask) != mask) { + u32 reg = i915_pipestat(pipe); + + dev_priv->pipestat[pipe] |= mask; + /* Enable the interrupt, clear any pending status */ + I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16)); + (void) I915_READ(reg); + } +} + +void +i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask) +{ + if ((dev_priv->pipestat[pipe] & mask) != 0) { + u32 reg = i915_pipestat(pipe); + + dev_priv->pipestat[pipe] &= ~mask; + I915_WRITE(reg, dev_priv->pipestat[pipe]); + (void) I915_READ(reg); + } +} + /** * i915_pipe_enabled - check if a pipe is enabled * @dev: DRM device @@ -80,211 +127,6 @@ i915_pipe_enabled(struct drm_device *dev, int pipe) return 0; } -/** - * Emit blits for scheduled buffer swaps. - * - * This function will be called with the HW lock held. - * Because this function must grab the ring mutex (dev->struct_mutex), - * it can no longer run at soft irq time. We'll fix this when we do - * the DRI2 swap buffer work. - */ -static void i915_vblank_tasklet(struct drm_device *dev) -{ - drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - unsigned long irqflags; - struct list_head *list, *tmp, hits, *hit; - int nhits, nrects, slice[2], upper[2], lower[2], i; - unsigned counter[2]; - struct drm_drawable_info *drw; - drm_i915_sarea_t *sarea_priv = dev_priv->sarea_priv; - u32 cpp = dev_priv->cpp; - u32 cmd = (cpp == 4) ? (XY_SRC_COPY_BLT_CMD | - XY_SRC_COPY_BLT_WRITE_ALPHA | - XY_SRC_COPY_BLT_WRITE_RGB) - : XY_SRC_COPY_BLT_CMD; - u32 src_pitch = sarea_priv->pitch * cpp; - u32 dst_pitch = sarea_priv->pitch * cpp; - u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24); - RING_LOCALS; - - mutex_lock(&dev->struct_mutex); - - if (IS_I965G(dev) && sarea_priv->front_tiled) { - cmd |= XY_SRC_COPY_BLT_DST_TILED; - dst_pitch >>= 2; - } - if (IS_I965G(dev) && sarea_priv->back_tiled) { - cmd |= XY_SRC_COPY_BLT_SRC_TILED; - src_pitch >>= 2; - } - - counter[0] = drm_vblank_count(dev, 0); - counter[1] = drm_vblank_count(dev, 1); - - DRM_DEBUG("\n"); - - INIT_LIST_HEAD(&hits); - - nhits = nrects = 0; - - spin_lock_irqsave(&dev_priv->swaps_lock, irqflags); - - /* Find buffer swaps scheduled for this vertical blank */ - list_for_each_safe(list, tmp, &dev_priv->vbl_swaps.head) { - drm_i915_vbl_swap_t *vbl_swap = - list_entry(list, drm_i915_vbl_swap_t, head); - int pipe = vbl_swap->pipe; - - if ((counter[pipe] - vbl_swap->sequence) > (1<<23)) - continue; - - list_del(list); - dev_priv->swaps_pending--; - drm_vblank_put(dev, pipe); - - spin_unlock(&dev_priv->swaps_lock); - spin_lock(&dev->drw_lock); - - drw = drm_get_drawable_info(dev, vbl_swap->drw_id); - - list_for_each(hit, &hits) { - drm_i915_vbl_swap_t *swap_cmp = - list_entry(hit, drm_i915_vbl_swap_t, head); - struct drm_drawable_info *drw_cmp = - drm_get_drawable_info(dev, swap_cmp->drw_id); - - /* Make sure both drawables are still - * around and have some rectangles before - * we look inside to order them for the - * blts below. - */ - if (drw_cmp && drw_cmp->num_rects > 0 && - drw && drw->num_rects > 0 && - drw_cmp->rects[0].y1 > drw->rects[0].y1) { - list_add_tail(list, hit); - break; - } - } - - spin_unlock(&dev->drw_lock); - - /* List of hits was empty, or we reached the end of it */ - if (hit == &hits) - list_add_tail(list, hits.prev); - - nhits++; - - spin_lock(&dev_priv->swaps_lock); - } - - if (nhits == 0) { - spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); - mutex_unlock(&dev->struct_mutex); - return; - } - - spin_unlock(&dev_priv->swaps_lock); - - i915_kernel_lost_context(dev); - - if (IS_I965G(dev)) { - BEGIN_LP_RING(4); - - OUT_RING(GFX_OP_DRAWRECT_INFO_I965); - OUT_RING(0); - OUT_RING(((sarea_priv->width - 1) & 0xffff) | ((sarea_priv->height - 1) << 16)); - OUT_RING(0); - ADVANCE_LP_RING(); - } else { - BEGIN_LP_RING(6); - - OUT_RING(GFX_OP_DRAWRECT_INFO); - OUT_RING(0); - OUT_RING(0); - OUT_RING(sarea_priv->width | sarea_priv->height << 16); - OUT_RING(sarea_priv->width | sarea_priv->height << 16); - OUT_RING(0); - - ADVANCE_LP_RING(); - } - - sarea_priv->ctxOwner = DRM_KERNEL_CONTEXT; - - upper[0] = upper[1] = 0; - slice[0] = max(sarea_priv->pipeA_h / nhits, 1); - slice[1] = max(sarea_priv->pipeB_h / nhits, 1); - lower[0] = sarea_priv->pipeA_y + slice[0]; - lower[1] = sarea_priv->pipeB_y + slice[0]; - - spin_lock(&dev->drw_lock); - - /* Emit blits for buffer swaps, partitioning both outputs into as many - * slices as there are buffer swaps scheduled in order to avoid tearing - * (based on the assumption that a single buffer swap would always - * complete before scanout starts). - */ - for (i = 0; i++ < nhits; - upper[0] = lower[0], lower[0] += slice[0], - upper[1] = lower[1], lower[1] += slice[1]) { - if (i == nhits) - lower[0] = lower[1] = sarea_priv->height; - - list_for_each(hit, &hits) { - drm_i915_vbl_swap_t *swap_hit = - list_entry(hit, drm_i915_vbl_swap_t, head); - struct drm_clip_rect *rect; - int num_rects, pipe; - unsigned short top, bottom; - - drw = drm_get_drawable_info(dev, swap_hit->drw_id); - - /* The drawable may have been destroyed since - * the vblank swap was queued - */ - if (!drw) - continue; - - rect = drw->rects; - pipe = swap_hit->pipe; - top = upper[pipe]; - bottom = lower[pipe]; - - for (num_rects = drw->num_rects; num_rects--; rect++) { - int y1 = max(rect->y1, top); - int y2 = min(rect->y2, bottom); - - if (y1 >= y2) - continue; - - BEGIN_LP_RING(8); - - OUT_RING(cmd); - OUT_RING(ropcpp | dst_pitch); - OUT_RING((y1 << 16) | rect->x1); - OUT_RING((y2 << 16) | rect->x2); - OUT_RING(sarea_priv->front_offset); - OUT_RING((y1 << 16) | rect->x1); - OUT_RING(src_pitch); - OUT_RING(sarea_priv->back_offset); - - ADVANCE_LP_RING(); - } - } - } - - spin_unlock_irqrestore(&dev->drw_lock, irqflags); - mutex_unlock(&dev->struct_mutex); - - list_for_each_safe(hit, tmp, &hits) { - drm_i915_vbl_swap_t *swap_hit = - list_entry(hit, drm_i915_vbl_swap_t, head); - - list_del(hit); - - drm_free(swap_hit, sizeof(*swap_hit), DRM_MEM_DRIVER); - } -} - /* Called from drm generic code, passed a 'crtc', which * we use as a pipe index */ @@ -322,121 +164,106 @@ u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) return count; } -void -i915_vblank_work_handler(struct work_struct *work) -{ - drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, - vblank_work); - struct drm_device *dev = dev_priv->dev; - unsigned long irqflags; - - if (dev->lock.hw_lock == NULL) { - i915_vblank_tasklet(dev); - return; - } - - spin_lock_irqsave(&dev->tasklet_lock, irqflags); - dev->locked_tasklet_func = i915_vblank_tasklet; - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - - /* Try to get the lock now, if this fails, the lock - * holder will execute the tasklet during unlock - */ - if (!drm_lock_take(&dev->lock, DRM_KERNEL_CONTEXT)) - return; - - dev->lock.lock_time = jiffies; - atomic_inc(&dev->counts[_DRM_STAT_LOCKS]); - - spin_lock_irqsave(&dev->tasklet_lock, irqflags); - dev->locked_tasklet_func = NULL; - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - - i915_vblank_tasklet(dev); - drm_lock_free(&dev->lock, DRM_KERNEL_CONTEXT); -} - irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 iir; + u32 iir, new_iir; u32 pipea_stats, pipeb_stats; + u32 vblank_status; + u32 vblank_enable; int vblank = 0; + unsigned long irqflags; + int irq_received; + int ret = IRQ_NONE; atomic_inc(&dev_priv->irq_received); - if (dev->pdev->msi_enabled) - I915_WRITE(IMR, ~0); iir = I915_READ(IIR); - if (iir == 0) { - if (dev->pdev->msi_enabled) { - I915_WRITE(IMR, dev_priv->irq_mask_reg); - (void) I915_READ(IMR); - } - return IRQ_NONE; + if (IS_I965G(dev)) { + vblank_status = I915_START_VBLANK_INTERRUPT_STATUS; + vblank_enable = PIPE_START_VBLANK_INTERRUPT_ENABLE; + } else { + vblank_status = I915_VBLANK_INTERRUPT_STATUS; + vblank_enable = I915_VBLANK_INTERRUPT_ENABLE; } - /* - * Clear the PIPE(A|B)STAT regs before the IIR otherwise - * we may get extra interrupts. - */ - if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) { + for (;;) { + irq_received = iir != 0; + + /* Can't rely on pipestat interrupt bit in iir as it might + * have been cleared after the pipestat interrupt was received. + * It doesn't set the bit in iir again, but it still produces + * interrupts (for non-MSI). + */ + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); pipea_stats = I915_READ(PIPEASTAT); - if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_A)) - pipea_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | - PIPE_VBLANK_INTERRUPT_ENABLE); - else if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS| - PIPE_VBLANK_INTERRUPT_STATUS)) { + pipeb_stats = I915_READ(PIPEBSTAT); + /* + * Clear the PIPE(A|B)STAT regs before the IIR + */ + if (pipea_stats & 0x8000ffff) { + I915_WRITE(PIPEASTAT, pipea_stats); + irq_received = 1; + } + + if (pipeb_stats & 0x8000ffff) { + I915_WRITE(PIPEBSTAT, pipeb_stats); + irq_received = 1; + } + spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); + + if (!irq_received) + break; + + ret = IRQ_HANDLED; + + I915_WRITE(IIR, iir); + new_iir = I915_READ(IIR); /* Flush posted writes */ + + if (dev_priv->sarea_priv) + dev_priv->sarea_priv->last_dispatch = + READ_BREADCRUMB(dev_priv); + + if (iir & I915_USER_INTERRUPT) { + dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev); + DRM_WAKEUP(&dev_priv->irq_queue); + } + + if (pipea_stats & vblank_status) { vblank++; drm_handle_vblank(dev, 0); } - I915_WRITE(PIPEASTAT, pipea_stats); - } - if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) { - pipeb_stats = I915_READ(PIPEBSTAT); - /* Ack the event */ - I915_WRITE(PIPEBSTAT, pipeb_stats); - - /* The vblank interrupt gets enabled even if we didn't ask for - it, so make sure it's shut down again */ - if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_B)) - pipeb_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | - PIPE_VBLANK_INTERRUPT_ENABLE); - else if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS| - PIPE_VBLANK_INTERRUPT_STATUS)) { + if (pipeb_stats & vblank_status) { vblank++; drm_handle_vblank(dev, 1); } - if (pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) + if ((pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) || + (iir & I915_ASLE_INTERRUPT)) opregion_asle_intr(dev); - I915_WRITE(PIPEBSTAT, pipeb_stats); - } - - I915_WRITE(IIR, iir); - if (dev->pdev->msi_enabled) - I915_WRITE(IMR, dev_priv->irq_mask_reg); - (void) I915_READ(IIR); /* Flush posted writes */ - - if (dev_priv->sarea_priv) - dev_priv->sarea_priv->last_dispatch = - READ_BREADCRUMB(dev_priv); - if (iir & I915_USER_INTERRUPT) { - dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev); - DRM_WAKEUP(&dev_priv->irq_queue); + /* With MSI, interrupts are only generated when iir + * transitions from zero to nonzero. If another bit got + * set while we were handling the existing iir bits, then + * we would never get another interrupt. + * + * This is fine on non-MSI as well, as if we hit this path + * we avoid exiting the interrupt handler only to generate + * another one. + * + * Note that for MSI this could cause a stray interrupt report + * if an interrupt landed in the time between writing IIR and + * the posting read. This should be rare enough to never + * trigger the 99% of 100,000 interrupts test for disabling + * stray interrupts. + */ + iir = new_iir; } - if (iir & I915_ASLE_INTERRUPT) - opregion_asle_intr(dev); - - if (vblank && dev_priv->swaps_pending > 0) - schedule_work(&dev_priv->vblank_work); - - return IRQ_HANDLED; + return ret; } static int i915_emit_irq(struct drm_device * dev) @@ -454,12 +281,10 @@ static int i915_emit_irq(struct drm_device * dev) if (dev_priv->sarea_priv) dev_priv->sarea_priv->last_enqueue = dev_priv->counter; - BEGIN_LP_RING(6); + BEGIN_LP_RING(4); OUT_RING(MI_STORE_DWORD_INDEX); - OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT); + OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT); OUT_RING(dev_priv->counter); - OUT_RING(0); - OUT_RING(0); OUT_RING(MI_USER_INTERRUPT); ADVANCE_LP_RING(); @@ -574,48 +399,16 @@ int i915_irq_wait(struct drm_device *dev, void *data, int i915_enable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 pipestat_reg = 0; - u32 pipestat; - u32 interrupt = 0; unsigned long irqflags; - switch (pipe) { - case 0: - pipestat_reg = PIPEASTAT; - interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; - break; - case 1: - pipestat_reg = PIPEBSTAT; - interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; - break; - default: - DRM_ERROR("tried to enable vblank on non-existent pipe %d\n", - pipe); - return 0; - } - spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); - /* Enabling vblank events in IMR comes before PIPESTAT write, or - * there's a race where the PIPESTAT vblank bit gets set to 1, so - * the OR of enabled PIPESTAT bits goes to 1, so the PIPExEVENT in - * ISR flashes to 1, but the IIR bit doesn't get set to 1 because - * IMR masks it. It doesn't ever get set after we clear the masking - * in IMR because the ISR bit is edge, not level-triggered, on the - * OR of PIPESTAT bits. - */ - i915_enable_irq(dev_priv, interrupt); - pipestat = I915_READ(pipestat_reg); if (IS_I965G(dev)) - pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE; + i915_enable_pipestat(dev_priv, pipe, + PIPE_START_VBLANK_INTERRUPT_ENABLE); else - pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE; - /* Clear any stale interrupt status */ - pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | - PIPE_VBLANK_INTERRUPT_STATUS); - I915_WRITE(pipestat_reg, pipestat); - (void) I915_READ(pipestat_reg); /* Posting read */ + i915_enable_pipestat(dev_priv, pipe, + PIPE_VBLANK_INTERRUPT_ENABLE); spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); - return 0; } @@ -625,37 +418,12 @@ int i915_enable_vblank(struct drm_device *dev, int pipe) void i915_disable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 pipestat_reg = 0; - u32 pipestat; - u32 interrupt = 0; unsigned long irqflags; - switch (pipe) { - case 0: - pipestat_reg = PIPEASTAT; - interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; - break; - case 1: - pipestat_reg = PIPEBSTAT; - interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; - break; - default: - DRM_ERROR("tried to disable vblank on non-existent pipe %d\n", - pipe); - return; - break; - } - spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); - i915_disable_irq(dev_priv, interrupt); - pipestat = I915_READ(pipestat_reg); - pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | - PIPE_VBLANK_INTERRUPT_ENABLE); - /* Clear any stale interrupt status */ - pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | - PIPE_VBLANK_INTERRUPT_STATUS); - I915_WRITE(pipestat_reg, pipestat); - (void) I915_READ(pipestat_reg); /* Posting read */ + i915_disable_pipestat(dev_priv, pipe, + PIPE_VBLANK_INTERRUPT_ENABLE | + PIPE_START_VBLANK_INTERRUPT_ENABLE); spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); } @@ -696,123 +464,21 @@ int i915_vblank_pipe_get(struct drm_device *dev, void *data, int i915_vblank_swap(struct drm_device *dev, void *data, struct drm_file *file_priv) { - drm_i915_private_t *dev_priv = dev->dev_private; - drm_i915_vblank_swap_t *swap = data; - drm_i915_vbl_swap_t *vbl_swap, *vbl_old; - unsigned int pipe, seqtype, curseq; - unsigned long irqflags; - struct list_head *list; - int ret; - - if (!dev_priv || !dev_priv->sarea_priv) { - DRM_ERROR("%s called with no initialization\n", __func__); - return -EINVAL; - } - - if (dev_priv->sarea_priv->rotation) { - DRM_DEBUG("Rotation not supported\n"); - return -EINVAL; - } - - if (swap->seqtype & ~(_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE | - _DRM_VBLANK_SECONDARY | _DRM_VBLANK_NEXTONMISS)) { - DRM_ERROR("Invalid sequence type 0x%x\n", swap->seqtype); - return -EINVAL; - } - - pipe = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0; - - seqtype = swap->seqtype & (_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE); - - if (!(dev_priv->vblank_pipe & (1 << pipe))) { - DRM_ERROR("Invalid pipe %d\n", pipe); - return -EINVAL; - } - - spin_lock_irqsave(&dev->drw_lock, irqflags); - - if (!drm_get_drawable_info(dev, swap->drawable)) { - spin_unlock_irqrestore(&dev->drw_lock, irqflags); - DRM_DEBUG("Invalid drawable ID %d\n", swap->drawable); - return -EINVAL; - } - - spin_unlock_irqrestore(&dev->drw_lock, irqflags); - - /* - * We take the ref here and put it when the swap actually completes - * in the tasklet. + /* The delayed swap mechanism was fundamentally racy, and has been + * removed. The model was that the client requested a delayed flip/swap + * from the kernel, then waited for vblank before continuing to perform + * rendering. The problem was that the kernel might wake the client + * up before it dispatched the vblank swap (since the lock has to be + * held while touching the ringbuffer), in which case the client would + * clear and start the next frame before the swap occurred, and + * flicker would occur in addition to likely missing the vblank. + * + * In the absence of this ioctl, userland falls back to a correct path + * of waiting for a vblank, then dispatching the swap on its own. + * Context switching to userland and back is plenty fast enough for + * meeting the requirements of vblank swapping. */ - ret = drm_vblank_get(dev, pipe); - if (ret) - return ret; - curseq = drm_vblank_count(dev, pipe); - - if (seqtype == _DRM_VBLANK_RELATIVE) - swap->sequence += curseq; - - if ((curseq - swap->sequence) <= (1<<23)) { - if (swap->seqtype & _DRM_VBLANK_NEXTONMISS) { - swap->sequence = curseq + 1; - } else { - DRM_DEBUG("Missed target sequence\n"); - drm_vblank_put(dev, pipe); - return -EINVAL; - } - } - - vbl_swap = drm_calloc(1, sizeof(*vbl_swap), DRM_MEM_DRIVER); - - if (!vbl_swap) { - DRM_ERROR("Failed to allocate memory to queue swap\n"); - drm_vblank_put(dev, pipe); - return -ENOMEM; - } - - vbl_swap->drw_id = swap->drawable; - vbl_swap->pipe = pipe; - vbl_swap->sequence = swap->sequence; - - spin_lock_irqsave(&dev_priv->swaps_lock, irqflags); - - list_for_each(list, &dev_priv->vbl_swaps.head) { - vbl_old = list_entry(list, drm_i915_vbl_swap_t, head); - - if (vbl_old->drw_id == swap->drawable && - vbl_old->pipe == pipe && - vbl_old->sequence == swap->sequence) { - spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); - drm_vblank_put(dev, pipe); - drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER); - DRM_DEBUG("Already scheduled\n"); - return 0; - } - } - - if (dev_priv->swaps_pending >= 10) { - DRM_DEBUG("Too many swaps queued\n"); - DRM_DEBUG(" pipe 0: %d pipe 1: %d\n", - drm_vblank_count(dev, 0), - drm_vblank_count(dev, 1)); - - list_for_each(list, &dev_priv->vbl_swaps.head) { - vbl_old = list_entry(list, drm_i915_vbl_swap_t, head); - DRM_DEBUG("\tdrw %x pipe %d seq %x\n", - vbl_old->drw_id, vbl_old->pipe, - vbl_old->sequence); - } - spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); - drm_vblank_put(dev, pipe); - drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER); - return -EBUSY; - } - - list_add_tail(&vbl_swap->head, &dev_priv->vbl_swaps.head); - dev_priv->swaps_pending++; - - spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); - - return 0; + return -EINVAL; } /* drm_dma.h hooks @@ -822,37 +488,35 @@ void i915_driver_irq_preinstall(struct drm_device * dev) drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; I915_WRITE(HWSTAM, 0xeffe); + I915_WRITE(PIPEASTAT, 0); + I915_WRITE(PIPEBSTAT, 0); I915_WRITE(IMR, 0xffffffff); I915_WRITE(IER, 0x0); + (void) I915_READ(IER); } int i915_driver_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - int ret, num_pipes = 2; - - spin_lock_init(&dev_priv->swaps_lock); - INIT_LIST_HEAD(&dev_priv->vbl_swaps.head); - INIT_WORK(&dev_priv->vblank_work, i915_vblank_work_handler); - dev_priv->swaps_pending = 0; - - /* Set initial unmasked IRQs to just the selected vblank pipes. */ - dev_priv->irq_mask_reg = ~0; - - ret = drm_vblank_init(dev, num_pipes); - if (ret) - return ret; dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; - dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT; - dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT; dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ - dev_priv->irq_mask_reg &= I915_INTERRUPT_ENABLE_MASK; + /* Unmask the interrupts that we always want on. */ + dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX; + + dev_priv->pipestat[0] = 0; + dev_priv->pipestat[1] = 0; + + /* Disable pipe interrupt enables, clear pending pipe status */ + I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff); + I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff); + /* Clear pending interrupt status */ + I915_WRITE(IIR, I915_READ(IIR)); - I915_WRITE(IMR, dev_priv->irq_mask_reg); I915_WRITE(IER, I915_INTERRUPT_ENABLE_MASK); + I915_WRITE(IMR, dev_priv->irq_mask_reg); (void) I915_READ(IER); opregion_enable_asle(dev); @@ -864,7 +528,6 @@ int i915_driver_irq_postinstall(struct drm_device *dev) void i915_driver_irq_uninstall(struct drm_device * dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 temp; if (!dev_priv) return; @@ -872,13 +535,12 @@ void i915_driver_irq_uninstall(struct drm_device * dev) dev_priv->vblank_pipe = 0; I915_WRITE(HWSTAM, 0xffffffff); + I915_WRITE(PIPEASTAT, 0); + I915_WRITE(PIPEBSTAT, 0); I915_WRITE(IMR, 0xffffffff); I915_WRITE(IER, 0x0); - temp = I915_READ(PIPEASTAT); - I915_WRITE(PIPEASTAT, temp); - temp = I915_READ(PIPEBSTAT); - I915_WRITE(PIPEBSTAT, temp); - temp = I915_READ(IIR); - I915_WRITE(IIR, temp); + I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff); + I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff); + I915_WRITE(IIR, I915_READ(IIR)); } diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c index 1787a0c7e3ab..13ae731a33db 100644 --- a/drivers/gpu/drm/i915/i915_opregion.c +++ b/drivers/gpu/drm/i915/i915_opregion.c @@ -235,17 +235,15 @@ void opregion_enable_asle(struct drm_device *dev) struct opregion_asle *asle = dev_priv->opregion.asle; if (asle) { - u32 pipeb_stats = I915_READ(PIPEBSTAT); if (IS_MOBILE(dev)) { - /* Many devices trigger events with a write to the - legacy backlight controller, so we need to ensure - that it's able to generate interrupts */ - I915_WRITE(PIPEBSTAT, pipeb_stats |= - I915_LEGACY_BLC_EVENT_ENABLE); - i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT | - I915_DISPLAY_PIPE_B_EVENT_INTERRUPT); - } else - i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT); + unsigned long irqflags; + + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); + i915_enable_pipestat(dev_priv, 1, + I915_LEGACY_BLC_EVENT_ENABLE); + spin_unlock_irqrestore(&dev_priv->user_irq_lock, + irqflags); + } asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN | ASLE_PFMB_EN; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5c2d9f206d05..9d24aaeb8a45 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -522,11 +522,15 @@ #define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED (2 << 0) #define DCC_ADDRESSING_MODE_MASK (3 << 0) #define DCC_CHANNEL_XOR_DISABLE (1 << 10) +#define DCC_CHANNEL_XOR_BIT_17 (1 << 9) /** 965 MCH register controlling DRAM channel configuration */ #define C0DRB3 0x10206 #define C1DRB3 0x10606 +/** GM965 GM45 render standby register */ +#define MCHBAR_RENDER_STANDBY 0x111B8 + /* * Overlay regs */ diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 603fe742ccd4..5d84027ee8f3 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -240,6 +240,13 @@ int i915_save_state(struct drm_device *dev) pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB); + /* Render Standby */ + if (IS_I965G(dev) && IS_MOBILE(dev)) + dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY); + + /* Hardware status page */ + dev_priv->saveHWS = I915_READ(HWS_PGA); + /* Display arbitration control */ dev_priv->saveDSPARB = I915_READ(DSPARB); @@ -365,6 +372,14 @@ int i915_restore_state(struct drm_device *dev) pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB); + /* Render Standby */ + if (IS_I965G(dev) && IS_MOBILE(dev)) + I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY); + + /* Hardware status page */ + I915_WRITE(HWS_PGA, dev_priv->saveHWS); + + /* Display arbitration */ I915_WRITE(DSPARB, dev_priv->saveDSPARB); /* Pipe & plane A info */ diff --git a/drivers/gpu/drm/mga/mga_dma.c b/drivers/gpu/drm/mga/mga_dma.c index c1d12dbfa8d8..b49c5ff29585 100644 --- a/drivers/gpu/drm/mga/mga_dma.c +++ b/drivers/gpu/drm/mga/mga_dma.c @@ -396,6 +396,7 @@ int mga_freelist_put(struct drm_device * dev, struct drm_buf * buf) int mga_driver_load(struct drm_device * dev, unsigned long flags) { drm_mga_private_t *dev_priv; + int ret; dev_priv = drm_alloc(sizeof(drm_mga_private_t), DRM_MEM_DRIVER); if (!dev_priv) @@ -415,6 +416,13 @@ int mga_driver_load(struct drm_device * dev, unsigned long flags) dev->types[7] = _DRM_STAT_PRIMARY; dev->types[8] = _DRM_STAT_SECONDARY; + ret = drm_vblank_init(dev, 1); + + if (ret) { + (void) mga_driver_unload(dev); + return ret; + } + return 0; } diff --git a/drivers/gpu/drm/mga/mga_irq.c b/drivers/gpu/drm/mga/mga_irq.c index bab42f41188b..daa6041a483a 100644 --- a/drivers/gpu/drm/mga/mga_irq.c +++ b/drivers/gpu/drm/mga/mga_irq.c @@ -152,11 +152,6 @@ void mga_driver_irq_preinstall(struct drm_device * dev) int mga_driver_irq_postinstall(struct drm_device *dev) { drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private; - int ret; - - ret = drm_vblank_init(dev, 1); - if (ret) - return ret; DRM_INIT_WAITQUEUE(&dev_priv->fence_queue); diff --git a/drivers/gpu/drm/r128/r128_drv.c b/drivers/gpu/drm/r128/r128_drv.c index 3265d53ba91f..601f4c0e5da5 100644 --- a/drivers/gpu/drm/r128/r128_drv.c +++ b/drivers/gpu/drm/r128/r128_drv.c @@ -45,6 +45,7 @@ static struct drm_driver driver = { DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG | DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED, .dev_priv_size = sizeof(drm_r128_buf_priv_t), + .load = r128_driver_load, .preclose = r128_driver_preclose, .lastclose = r128_driver_lastclose, .get_vblank_counter = r128_get_vblank_counter, @@ -84,6 +85,11 @@ static struct drm_driver driver = { .patchlevel = DRIVER_PATCHLEVEL, }; +int r128_driver_load(struct drm_device * dev, unsigned long flags) +{ + return drm_vblank_init(dev, 1); +} + static int __init r128_init(void) { driver.num_ioctls = r128_max_ioctl; diff --git a/drivers/gpu/drm/r128/r128_drv.h b/drivers/gpu/drm/r128/r128_drv.h index 5898b274279d..797a26c42dab 100644 --- a/drivers/gpu/drm/r128/r128_drv.h +++ b/drivers/gpu/drm/r128/r128_drv.h @@ -159,6 +159,7 @@ extern void r128_driver_irq_preinstall(struct drm_device * dev); extern int r128_driver_irq_postinstall(struct drm_device *dev); extern void r128_driver_irq_uninstall(struct drm_device * dev); extern void r128_driver_lastclose(struct drm_device * dev); +extern int r128_driver_load(struct drm_device * dev, unsigned long flags); extern void r128_driver_preclose(struct drm_device * dev, struct drm_file *file_priv); diff --git a/drivers/gpu/drm/r128/r128_irq.c b/drivers/gpu/drm/r128/r128_irq.c index d7349012a680..69810fb8ac49 100644 --- a/drivers/gpu/drm/r128/r128_irq.c +++ b/drivers/gpu/drm/r128/r128_irq.c @@ -102,7 +102,7 @@ void r128_driver_irq_preinstall(struct drm_device * dev) int r128_driver_irq_postinstall(struct drm_device *dev) { - return drm_vblank_init(dev, 1); + return 0; } void r128_driver_irq_uninstall(struct drm_device * dev) diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 073894824e6b..dcebb4bee7aa 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -1751,6 +1751,18 @@ int radeon_driver_load(struct drm_device *dev, unsigned long flags) else dev_priv->flags |= RADEON_IS_PCI; + ret = drm_addmap(dev, drm_get_resource_start(dev, 2), + drm_get_resource_len(dev, 2), _DRM_REGISTERS, + _DRM_READ_ONLY | _DRM_DRIVER, &dev_priv->mmio); + if (ret != 0) + return ret; + + ret = drm_vblank_init(dev, 2); + if (ret) { + radeon_driver_unload(dev); + return ret; + } + DRM_DEBUG("%s card detected\n", ((dev_priv->flags & RADEON_IS_AGP) ? "AGP" : (((dev_priv->flags & RADEON_IS_PCIE) ? "PCIE" : "PCI")))); return ret; @@ -1767,12 +1779,6 @@ int radeon_driver_firstopen(struct drm_device *dev) dev_priv->gart_info.table_size = RADEON_PCIGART_TABLE_SIZE; - ret = drm_addmap(dev, drm_get_resource_start(dev, 2), - drm_get_resource_len(dev, 2), _DRM_REGISTERS, - _DRM_READ_ONLY, &dev_priv->mmio); - if (ret != 0) - return ret; - dev_priv->fb_aper_offset = drm_get_resource_start(dev, 0); ret = drm_addmap(dev, dev_priv->fb_aper_offset, drm_get_resource_len(dev, 0), _DRM_FRAME_BUFFER, @@ -1788,6 +1794,9 @@ int radeon_driver_unload(struct drm_device *dev) drm_radeon_private_t *dev_priv = dev->dev_private; DRM_DEBUG("\n"); + + drm_rmmap(dev, dev_priv->mmio); + drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER); dev->dev_private = NULL; diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index 02f5575ba395..3bbb871b25d5 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -287,7 +287,6 @@ typedef struct drm_radeon_private { unsigned long gart_textures_offset; drm_local_map_t *sarea; - drm_local_map_t *mmio; drm_local_map_t *cp_ring; drm_local_map_t *ring_rptr; drm_local_map_t *gart_textures; @@ -300,7 +299,6 @@ typedef struct drm_radeon_private { atomic_t swi_emitted; int vblank_crtc; uint32_t irq_enable_reg; - int irq_enabled; uint32_t r500_disp_irq_reg; struct radeon_surface surfaces[RADEON_MAX_SURFACES]; @@ -318,6 +316,7 @@ typedef struct drm_radeon_private { int num_gb_pipes; int track_flush; + drm_local_map_t *mmio; } drm_radeon_private_t; typedef struct drm_radeon_buf_priv { diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c index 5079f7054a2f..99be11418ac2 100644 --- a/drivers/gpu/drm/radeon/radeon_irq.c +++ b/drivers/gpu/drm/radeon/radeon_irq.c @@ -44,7 +44,8 @@ void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state) else dev_priv->irq_enable_reg &= ~mask; - RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg); + if (!dev->irq_enabled) + RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg); } static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state) @@ -56,7 +57,8 @@ static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state) else dev_priv->r500_disp_irq_reg &= ~mask; - RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg); + if (!dev->irq_enabled) + RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg); } int radeon_enable_vblank(struct drm_device *dev, int crtc) @@ -337,15 +339,10 @@ int radeon_driver_irq_postinstall(struct drm_device *dev) { drm_radeon_private_t *dev_priv = (drm_radeon_private_t *) dev->dev_private; - int ret; atomic_set(&dev_priv->swi_emitted, 0); DRM_INIT_WAITQUEUE(&dev_priv->swi_queue); - ret = drm_vblank_init(dev, 2); - if (ret) - return ret; - dev->max_vblank_count = 0x001fffff; radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1); @@ -360,8 +357,6 @@ void radeon_driver_irq_uninstall(struct drm_device * dev) if (!dev_priv) return; - dev_priv->irq_enabled = 0; - if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RS690) RADEON_WRITE(R500_DxMODE_INT_MASK, 0); /* Disable *all* interrupts */ diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c index 665d319b927b..c248c1d37268 100644 --- a/drivers/gpu/drm/via/via_irq.c +++ b/drivers/gpu/drm/via/via_irq.c @@ -314,7 +314,6 @@ int via_driver_irq_postinstall(struct drm_device *dev) if (!dev_priv) return -EINVAL; - drm_vblank_init(dev, 1); status = VIA_READ(VIA_REG_INTERRUPT); VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL | dev_priv->irq_enable_mask); diff --git a/drivers/gpu/drm/via/via_map.c b/drivers/gpu/drm/via/via_map.c index a967556be014..2c4f0b485792 100644 --- a/drivers/gpu/drm/via/via_map.c +++ b/drivers/gpu/drm/via/via_map.c @@ -107,8 +107,17 @@ int via_driver_load(struct drm_device *dev, unsigned long chipset) ret = drm_sman_init(&dev_priv->sman, 2, 12, 8); if (ret) { drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER); + return ret; } - return ret; + + ret = drm_vblank_init(dev, 1); + if (ret) { + drm_sman_takedown(&dev_priv->sman); + drm_free(dev_priv, sizeof(drm_via_private_t), DRM_MEM_DRIVER); + return ret; + } + + return 0; } int via_driver_unload(struct drm_device *dev) diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index c6ab4ba60c52..aa28aed0e46c 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -55,10 +55,11 @@ struct apple_key_translation { static struct apple_key_translation apple_fn_keys[] = { { KEY_BACKSPACE, KEY_DELETE }, + { KEY_ENTER, KEY_INSERT }, { KEY_F1, KEY_BRIGHTNESSDOWN, APPLE_FLAG_FKEY }, { KEY_F2, KEY_BRIGHTNESSUP, APPLE_FLAG_FKEY }, - { KEY_F3, KEY_FN_F5, APPLE_FLAG_FKEY }, /* Exposé */ - { KEY_F4, KEY_FN_F4, APPLE_FLAG_FKEY }, /* Dashboard */ + { KEY_F3, KEY_SCALE, APPLE_FLAG_FKEY }, + { KEY_F4, KEY_DASHBOARD, APPLE_FLAG_FKEY }, { KEY_F5, KEY_KBDILLUMDOWN, APPLE_FLAG_FKEY }, { KEY_F6, KEY_KBDILLUMUP, APPLE_FLAG_FKEY }, { KEY_F7, KEY_PREVIOUSSONG, APPLE_FLAG_FKEY }, @@ -399,12 +400,12 @@ static const struct hid_device_id apple_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | APPLE_RDESC_JIS }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI), + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO), + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS), + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI), .driver_data = APPLE_HAS_FN }, @@ -418,6 +419,12 @@ static const struct hid_device_id apple_devices[] = { .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS), .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI), + .driver_data = APPLE_HAS_FN }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO), + .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS), + .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY), diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 1903e7515650..40df3e1b4bd1 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1241,18 +1241,20 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, - { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) }, { HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) }, { HID_USB_DEVICE(USB_VENDOR_ID_BRIGHT, USB_DEVICE_ID_BRIGHT_ABNT2) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) }, @@ -1264,6 +1266,9 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) }, { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, @@ -1408,6 +1413,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) }, { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM)}, { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM2)}, + { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) }, { HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) }, @@ -1417,7 +1423,6 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) }, { HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) }, { HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) }, - { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) }, @@ -1433,7 +1438,6 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_SUPER_Q2) }, { HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_GOGOPEN) }, { HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_PENPOWER) }, - { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_GRETAGMACBETH, USB_DEVICE_ID_GRETAGMACBETH_HUEY) }, { HID_USB_DEVICE(USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB) }, @@ -1485,6 +1489,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1007) }, { HID_USB_DEVICE(USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA) }, { HID_USB_DEVICE(USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_GPEN_560) }, { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY) }, { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY) }, @@ -1729,7 +1734,7 @@ static int __init hid_init(void) goto err_bus; #ifdef CONFIG_HID_COMPAT - hid_compat_wq = create_workqueue("hid_compat"); + hid_compat_wq = create_singlethread_workqueue("hid_compat"); if (!hid_compat_wq) { hidraw_exit(); goto err; diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 5cc404291736..39289699c32f 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -82,6 +82,9 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230 #define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231 #define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238 #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b #define USB_DEVICE_ID_APPLE_ATV_IRCONTROL 0x8241 @@ -160,6 +163,7 @@ #define USB_VENDOR_ID_GAMERON 0x0810 #define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR 0x0001 +#define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR 0x0002 #define USB_VENDOR_ID_GENERAL_TOUCH 0x0dfc @@ -253,6 +257,9 @@ #define USB_VENDOR_ID_KBGEAR 0x084e #define USB_DEVICE_ID_KBGEAR_JAMSTUDIO 0x1001 +#define USB_VENDOR_ID_KWORLD 0x1b80 +#define USB_DEVICE_ID_KWORLD_RADIO_FM700 0xd700 + #define USB_VENDOR_ID_LABTEC 0x1020 #define USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD 0x0006 diff --git a/drivers/hid/hid-pl.c b/drivers/hid/hid-pl.c index acd815586182..46941f979b9d 100644 --- a/drivers/hid/hid-pl.c +++ b/drivers/hid/hid-pl.c @@ -178,6 +178,8 @@ err: static const struct hid_device_id pl_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR), .driver_data = 1 }, /* Twin USB Joystick */ + { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR), + .driver_data = 1 }, /* Twin USB Joystick */ { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003), }, /* GreenAsia Inc. USB Joystick */ { } }; diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 894d52e05bf9..7685ae6808c4 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -38,7 +38,7 @@ static int hidraw_major; static struct cdev hidraw_cdev; static struct class *hidraw_class; static struct hidraw *hidraw_table[HIDRAW_MAX_DEVICES]; -static DEFINE_SPINLOCK(minors_lock); +static DEFINE_MUTEX(minors_lock); static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) { @@ -159,13 +159,13 @@ static int hidraw_open(struct inode *inode, struct file *file) struct hidraw_list *list; int err = 0; - lock_kernel(); if (!(list = kzalloc(sizeof(struct hidraw_list), GFP_KERNEL))) { err = -ENOMEM; goto out; } - spin_lock(&minors_lock); + lock_kernel(); + mutex_lock(&minors_lock); if (!hidraw_table[minor]) { printk(KERN_EMERG "hidraw device with minor %d doesn't exist\n", minor); @@ -180,13 +180,16 @@ static int hidraw_open(struct inode *inode, struct file *file) file->private_data = list; dev = hidraw_table[minor]; - if (!dev->open++) - dev->hid->ll_driver->open(dev->hid); + if (!dev->open++) { + err = dev->hid->ll_driver->open(dev->hid); + if (err < 0) + dev->open--; + } out_unlock: - spin_unlock(&minors_lock); -out: + mutex_unlock(&minors_lock); unlock_kernel(); +out: return err; } @@ -310,7 +313,7 @@ int hidraw_connect(struct hid_device *hid) result = -EINVAL; - spin_lock(&minors_lock); + mutex_lock(&minors_lock); for (minor = 0; minor < HIDRAW_MAX_DEVICES; minor++) { if (hidraw_table[minor]) @@ -320,9 +323,8 @@ int hidraw_connect(struct hid_device *hid) break; } - spin_unlock(&minors_lock); - if (result) { + mutex_unlock(&minors_lock); kfree(dev); goto out; } @@ -331,14 +333,14 @@ int hidraw_connect(struct hid_device *hid) NULL, "%s%d", "hidraw", minor); if (IS_ERR(dev->dev)) { - spin_lock(&minors_lock); hidraw_table[minor] = NULL; - spin_unlock(&minors_lock); + mutex_unlock(&minors_lock); result = PTR_ERR(dev->dev); kfree(dev); goto out; } + mutex_unlock(&minors_lock); init_waitqueue_head(&dev->wait); INIT_LIST_HEAD(&dev->list); @@ -360,9 +362,9 @@ void hidraw_disconnect(struct hid_device *hid) hidraw->exist = 0; - spin_lock(&minors_lock); + mutex_lock(&minors_lock); hidraw_table[hidraw->minor] = NULL; - spin_unlock(&minors_lock); + mutex_unlock(&minors_lock); device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor)); diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 18e5ddd722cd..606369ea24ca 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -781,6 +781,8 @@ static int usbhid_start(struct hid_device *hid) unsigned int n, insize = 0; int ret; + clear_bit(HID_DISCONNECTED, &usbhid->iofl); + usbhid->bufsize = HID_MIN_BUFFER_SIZE; hid_find_max_report(hid, HID_INPUT_REPORT, &usbhid->bufsize); hid_find_max_report(hid, HID_OUTPUT_REPORT, &usbhid->bufsize); @@ -794,7 +796,6 @@ static int usbhid_start(struct hid_device *hid) if (insize > HID_MAX_BUFFER_SIZE) insize = HID_MAX_BUFFER_SIZE; - mutex_lock(&usbhid->setup); if (hid_alloc_buffers(dev, hid)) { ret = -ENOMEM; goto fail; @@ -847,12 +848,6 @@ static int usbhid_start(struct hid_device *hid) } } - if (!usbhid->urbin) { - err_hid("couldn't find an input interrupt endpoint"); - ret = -ENODEV; - goto fail; - } - init_waitqueue_head(&usbhid->wait); INIT_WORK(&usbhid->reset_work, hid_reset); setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid); @@ -880,7 +875,6 @@ static int usbhid_start(struct hid_device *hid) hid_dump_device(hid); set_bit(HID_STARTED, &usbhid->iofl); - mutex_unlock(&usbhid->setup); return 0; @@ -888,8 +882,10 @@ fail: usb_free_urb(usbhid->urbin); usb_free_urb(usbhid->urbout); usb_free_urb(usbhid->urbctrl); + usbhid->urbin = NULL; + usbhid->urbout = NULL; + usbhid->urbctrl = NULL; hid_free_buffers(dev, hid); - mutex_unlock(&usbhid->setup); return ret; } @@ -900,7 +896,6 @@ static void usbhid_stop(struct hid_device *hid) if (WARN_ON(!usbhid)) return; - mutex_lock(&usbhid->setup); clear_bit(HID_STARTED, &usbhid->iofl); spin_lock_irq(&usbhid->inlock); /* Sync with error handler */ set_bit(HID_DISCONNECTED, &usbhid->iofl); @@ -924,9 +919,11 @@ static void usbhid_stop(struct hid_device *hid) usb_free_urb(usbhid->urbin); usb_free_urb(usbhid->urbctrl); usb_free_urb(usbhid->urbout); + usbhid->urbin = NULL; /* don't mess up next start */ + usbhid->urbctrl = NULL; + usbhid->urbout = NULL; hid_free_buffers(hid_to_usb_dev(hid), hid); - mutex_unlock(&usbhid->setup); } static struct hid_ll_driver usb_hid_driver = { @@ -940,15 +937,26 @@ static struct hid_ll_driver usb_hid_driver = { static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id) { + struct usb_host_interface *interface = intf->cur_altsetting; struct usb_device *dev = interface_to_usbdev(intf); struct usbhid_device *usbhid; struct hid_device *hid; + unsigned int n, has_in = 0; size_t len; int ret; dbg_hid("HID probe called for ifnum %d\n", intf->altsetting->desc.bInterfaceNumber); + for (n = 0; n < interface->desc.bNumEndpoints; n++) + if (usb_endpoint_is_int_in(&interface->endpoint[n].desc)) + has_in++; + if (!has_in) { + dev_err(&intf->dev, "couldn't find an input interrupt " + "endpoint\n"); + return -ENODEV; + } + hid = hid_allocate_device(); if (IS_ERR(hid)) return PTR_ERR(hid); @@ -1003,7 +1011,6 @@ static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id) hid->driver_data = usbhid; usbhid->hid = hid; - mutex_init(&usbhid->setup); /* needed on suspend/resume */ ret = hid_add_device(hid); if (ret) { @@ -1038,18 +1045,14 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message) struct hid_device *hid = usb_get_intfdata (intf); struct usbhid_device *usbhid = hid->driver_data; - mutex_lock(&usbhid->setup); - if (!test_bit(HID_STARTED, &usbhid->iofl)) { - mutex_unlock(&usbhid->setup); + if (!test_bit(HID_STARTED, &usbhid->iofl)) return 0; - } spin_lock_irq(&usbhid->inlock); /* Sync with error handler */ set_bit(HID_SUSPENDED, &usbhid->iofl); spin_unlock_irq(&usbhid->inlock); del_timer_sync(&usbhid->io_retry); usb_kill_urb(usbhid->urbin); - mutex_unlock(&usbhid->setup); dev_dbg(&intf->dev, "suspend\n"); return 0; } @@ -1060,16 +1063,12 @@ static int hid_resume(struct usb_interface *intf) struct usbhid_device *usbhid = hid->driver_data; int status; - mutex_lock(&usbhid->setup); - if (!test_bit(HID_STARTED, &usbhid->iofl)) { - mutex_unlock(&usbhid->setup); + if (!test_bit(HID_STARTED, &usbhid->iofl)) return 0; - } clear_bit(HID_SUSPENDED, &usbhid->iofl); usbhid->retry_delay = 0; status = hid_start_in(hid); - mutex_unlock(&usbhid->setup); dev_dbg(&intf->dev, "resume status %d\n", status); return status; } diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h index 55973ff54008..332abcdf9956 100644 --- a/drivers/hid/usbhid/usbhid.h +++ b/drivers/hid/usbhid/usbhid.h @@ -74,7 +74,6 @@ struct usbhid_device { dma_addr_t outbuf_dma; /* Output buffer dma */ spinlock_t outlock; /* Output fifo spinlock */ - struct mutex setup; unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */ struct timer_list io_retry; /* Retry timer */ unsigned long stop_retry; /* Time to give up, in jiffies */ diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 6de1e0ffd391..c709e821f04b 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -159,6 +159,16 @@ config SENSORS_ADM9240 This driver can also be built as a module. If so, the module will be called adm9240. +config SENSORS_ADT7462 + tristate "Analog Devices ADT7462" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + ADT7462 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7462. + config SENSORS_ADT7470 tristate "Analog Devices ADT7470" depends on I2C && EXPERIMENTAL @@ -825,6 +835,25 @@ config SENSORS_HDAPS Say Y here if you have an applicable laptop and want to experience the awesome power of hdaps. +config SENSORS_LIS3LV02D + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer" + depends on ACPI && INPUT + default n + help + This driver provides support for the LIS3LV02Dx accelerometer. In + particular, it can be found in a number of HP laptops, which have the + "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such + systems the driver should load automatically (via ACPI). The + accelerometer might also be found in other systems, connected via SPI + or I2C. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. + + This driver can also be built as a module. If so, the module + will be called lis3lv02d. + config SENSORS_APPLESMC tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" depends on INPUT && X86 diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 042d5a78622e..58fc5be5355d 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_ADM1029) += adm1029.o obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o +obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o obj-$(CONFIG_SENSORS_ADT7473) += adt7473.o obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o @@ -48,6 +49,7 @@ obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o +obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o obj-$(CONFIG_SENSORS_LM63) += lm63.o obj-$(CONFIG_SENSORS_LM70) += lm70.o obj-$(CONFIG_SENSORS_LM75) += lm75.o diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c new file mode 100644 index 000000000000..66107b4dc12a --- /dev/null +++ b/drivers/hwmon/adt7462.c @@ -0,0 +1,2002 @@ +/* + * A hwmon driver for the Analog Devices ADT7462 + * Copyright (C) 2008 IBM + * + * Author: Darrick J. Wong <djwong@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/log2.h> + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(adt7462); + +/* ADT7462 registers */ +#define ADT7462_REG_DEVICE 0x3D +#define ADT7462_REG_VENDOR 0x3E +#define ADT7462_REG_REVISION 0x3F + +#define ADT7462_REG_MIN_TEMP_BASE_ADDR 0x44 +#define ADT7462_REG_MIN_TEMP_MAX_ADDR 0x47 +#define ADT7462_REG_MAX_TEMP_BASE_ADDR 0x48 +#define ADT7462_REG_MAX_TEMP_MAX_ADDR 0x4B +#define ADT7462_REG_TEMP_BASE_ADDR 0x88 +#define ADT7462_REG_TEMP_MAX_ADDR 0x8F + +#define ADT7462_REG_FAN_BASE_ADDR 0x98 +#define ADT7462_REG_FAN_MAX_ADDR 0x9F +#define ADT7462_REG_FAN2_BASE_ADDR 0xA2 +#define ADT7462_REG_FAN2_MAX_ADDR 0xA9 +#define ADT7462_REG_FAN_ENABLE 0x07 +#define ADT7462_REG_FAN_MIN_BASE_ADDR 0x78 +#define ADT7462_REG_FAN_MIN_MAX_ADDR 0x7F + +#define ADT7462_REG_CFG2 0x02 +#define ADT7462_FSPD_MASK 0x20 + +#define ADT7462_REG_PWM_BASE_ADDR 0xAA +#define ADT7462_REG_PWM_MAX_ADDR 0xAD +#define ADT7462_REG_PWM_MIN_BASE_ADDR 0x28 +#define ADT7462_REG_PWM_MIN_MAX_ADDR 0x2B +#define ADT7462_REG_PWM_MAX 0x2C +#define ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR 0x5C +#define ADT7462_REG_PWM_TEMP_MIN_MAX_ADDR 0x5F +#define ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR 0x60 +#define ADT7462_REG_PWM_TEMP_RANGE_MAX_ADDR 0x63 +#define ADT7462_PWM_HYST_MASK 0x0F +#define ADT7462_PWM_RANGE_MASK 0xF0 +#define ADT7462_PWM_RANGE_SHIFT 4 +#define ADT7462_REG_PWM_CFG_BASE_ADDR 0x21 +#define ADT7462_REG_PWM_CFG_MAX_ADDR 0x24 +#define ADT7462_PWM_CHANNEL_MASK 0xE0 +#define ADT7462_PWM_CHANNEL_SHIFT 5 + +#define ADT7462_REG_PIN_CFG_BASE_ADDR 0x10 +#define ADT7462_REG_PIN_CFG_MAX_ADDR 0x13 +#define ADT7462_PIN7_INPUT 0x01 /* cfg0 */ +#define ADT7462_DIODE3_INPUT 0x20 +#define ADT7462_DIODE1_INPUT 0x40 +#define ADT7462_VID_INPUT 0x80 +#define ADT7462_PIN22_INPUT 0x04 /* cfg1 */ +#define ADT7462_PIN21_INPUT 0x08 +#define ADT7462_PIN19_INPUT 0x10 +#define ADT7462_PIN15_INPUT 0x20 +#define ADT7462_PIN13_INPUT 0x40 +#define ADT7462_PIN8_INPUT 0x80 +#define ADT7462_PIN23_MASK 0x03 +#define ADT7462_PIN23_SHIFT 0 +#define ADT7462_PIN26_MASK 0x0C /* cfg2 */ +#define ADT7462_PIN26_SHIFT 2 +#define ADT7462_PIN25_MASK 0x30 +#define ADT7462_PIN25_SHIFT 4 +#define ADT7462_PIN24_MASK 0xC0 +#define ADT7462_PIN24_SHIFT 6 +#define ADT7462_PIN26_VOLT_INPUT 0x08 +#define ADT7462_PIN25_VOLT_INPUT 0x20 +#define ADT7462_PIN28_SHIFT 6 /* cfg3 */ +#define ADT7462_PIN28_VOLT 0x5 + +#define ADT7462_REG_ALARM1 0xB8 +#define ADT7462_LT_ALARM 0x02 +#define ADT7462_R1T_ALARM 0x04 +#define ADT7462_R2T_ALARM 0x08 +#define ADT7462_R3T_ALARM 0x10 +#define ADT7462_REG_ALARM2 0xBB +#define ADT7462_V0_ALARM 0x01 +#define ADT7462_V1_ALARM 0x02 +#define ADT7462_V2_ALARM 0x04 +#define ADT7462_V3_ALARM 0x08 +#define ADT7462_V4_ALARM 0x10 +#define ADT7462_V5_ALARM 0x20 +#define ADT7462_V6_ALARM 0x40 +#define ADT7462_V7_ALARM 0x80 +#define ADT7462_REG_ALARM3 0xBC +#define ADT7462_V8_ALARM 0x08 +#define ADT7462_V9_ALARM 0x10 +#define ADT7462_V10_ALARM 0x20 +#define ADT7462_V11_ALARM 0x40 +#define ADT7462_V12_ALARM 0x80 +#define ADT7462_REG_ALARM4 0xBD +#define ADT7462_F0_ALARM 0x01 +#define ADT7462_F1_ALARM 0x02 +#define ADT7462_F2_ALARM 0x04 +#define ADT7462_F3_ALARM 0x08 +#define ADT7462_F4_ALARM 0x10 +#define ADT7462_F5_ALARM 0x20 +#define ADT7462_F6_ALARM 0x40 +#define ADT7462_F7_ALARM 0x80 +#define ADT7462_ALARM1 0x0000 +#define ADT7462_ALARM2 0x0100 +#define ADT7462_ALARM3 0x0200 +#define ADT7462_ALARM4 0x0300 +#define ADT7462_ALARM_REG_SHIFT 8 +#define ADT7462_ALARM_FLAG_MASK 0x0F + +#define ADT7462_TEMP_COUNT 4 +#define ADT7462_TEMP_REG(x) (ADT7462_REG_TEMP_BASE_ADDR + (x * 2)) +#define ADT7462_TEMP_MIN_REG(x) (ADT7462_REG_MIN_TEMP_BASE_ADDR + (x)) +#define ADT7462_TEMP_MAX_REG(x) (ADT7462_REG_MAX_TEMP_BASE_ADDR + (x)) +#define TEMP_FRAC_OFFSET 6 + +#define ADT7462_FAN_COUNT 8 +#define ADT7462_REG_FAN_MIN(x) (ADT7462_REG_FAN_MIN_BASE_ADDR + (x)) + +#define ADT7462_PWM_COUNT 4 +#define ADT7462_REG_PWM(x) (ADT7462_REG_PWM_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_MIN(x) (ADT7462_REG_PWM_MIN_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_TMIN(x) \ + (ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_TRANGE(x) \ + (ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR + (x)) + +#define ADT7462_PIN_CFG_REG_COUNT 4 +#define ADT7462_REG_PIN_CFG(x) (ADT7462_REG_PIN_CFG_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_CFG(x) (ADT7462_REG_PWM_CFG_BASE_ADDR + (x)) + +#define ADT7462_ALARM_REG_COUNT 4 + +/* + * The chip can measure 13 different voltage sources: + * + * 1. +12V1 (pin 7) + * 2. Vccp1/+2.5V/+1.8V/+1.5V (pin 23) + * 3. +12V3 (pin 22) + * 4. +5V (pin 21) + * 5. +1.25V/+0.9V (pin 19) + * 6. +2.5V/+1.8V (pin 15) + * 7. +3.3v (pin 13) + * 8. +12V2 (pin 8) + * 9. Vbatt/FSB_Vtt (pin 26) + * A. +3.3V/+1.2V1 (pin 25) + * B. Vccp2/+2.5V/+1.8V/+1.5V (pin 24) + * C. +1.5V ICH (only if BOTH pin 28/29 are set to +1.5V) + * D. +1.5V 3GPIO (only if BOTH pin 28/29 are set to +1.5V) + * + * Each of these 13 has a factor to convert raw to voltage. Even better, + * the pins can be connected to other sensors (tach/gpio/hot/etc), which + * makes the bookkeeping tricky. + * + * Some, but not all, of these voltages have low/high limits. + */ +#define ADT7462_VOLT_COUNT 12 + +#define ADT7462_VENDOR 0x41 +#define ADT7462_DEVICE 0x62 +/* datasheet only mentions a revision 4 */ +#define ADT7462_REVISION 0x04 + +/* How often do we reread sensors values? (In jiffies) */ +#define SENSOR_REFRESH_INTERVAL (2 * HZ) + +/* How often do we reread sensor limit values? (In jiffies) */ +#define LIMIT_REFRESH_INTERVAL (60 * HZ) + +/* datasheet says to divide this number by the fan reading to get fan rpm */ +#define FAN_PERIOD_TO_RPM(x) ((90000 * 60) / (x)) +#define FAN_RPM_TO_PERIOD FAN_PERIOD_TO_RPM +#define FAN_PERIOD_INVALID 65535 +#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) + +#define MASK_AND_SHIFT(value, prefix) \ + (((value) & prefix##_MASK) >> prefix##_SHIFT) + +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor)) + +struct adt7462_data { + struct device *hwmon_dev; + struct attribute_group attrs; + struct mutex lock; + char sensors_valid; + char limits_valid; + unsigned long sensors_last_updated; /* In jiffies */ + unsigned long limits_last_updated; /* In jiffies */ + + u8 temp[ADT7462_TEMP_COUNT]; + /* bits 6-7 are quarter pieces of temp */ + u8 temp_frac[ADT7462_TEMP_COUNT]; + u8 temp_min[ADT7462_TEMP_COUNT]; + u8 temp_max[ADT7462_TEMP_COUNT]; + u16 fan[ADT7462_FAN_COUNT]; + u8 fan_enabled; + u8 fan_min[ADT7462_FAN_COUNT]; + u8 cfg2; + u8 pwm[ADT7462_PWM_COUNT]; + u8 pin_cfg[ADT7462_PIN_CFG_REG_COUNT]; + u8 voltages[ADT7462_VOLT_COUNT]; + u8 volt_max[ADT7462_VOLT_COUNT]; + u8 volt_min[ADT7462_VOLT_COUNT]; + u8 pwm_min[ADT7462_PWM_COUNT]; + u8 pwm_tmin[ADT7462_PWM_COUNT]; + u8 pwm_trange[ADT7462_PWM_COUNT]; + u8 pwm_max; /* only one per chip */ + u8 pwm_cfg[ADT7462_PWM_COUNT]; + u8 alarms[ADT7462_ALARM_REG_COUNT]; +}; + +static int adt7462_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adt7462_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int adt7462_remove(struct i2c_client *client); + +static const struct i2c_device_id adt7462_id[] = { + { "adt7462", adt7462 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adt7462_id); + +static struct i2c_driver adt7462_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "adt7462", + }, + .probe = adt7462_probe, + .remove = adt7462_remove, + .id_table = adt7462_id, + .detect = adt7462_detect, + .address_data = &addr_data, +}; + +/* + * 16-bit registers on the ADT7462 are low-byte first. The data sheet says + * that the low byte must be read before the high byte. + */ +static inline int adt7462_read_word_data(struct i2c_client *client, u8 reg) +{ + u16 foo; + foo = i2c_smbus_read_byte_data(client, reg); + foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8); + return foo; +} + +/* For some reason these registers are not contiguous. */ +static int ADT7462_REG_FAN(int fan) +{ + if (fan < 4) + return ADT7462_REG_FAN_BASE_ADDR + (2 * fan); + return ADT7462_REG_FAN2_BASE_ADDR + (2 * (fan - 4)); +} + +/* Voltage registers are scattered everywhere */ +static int ADT7462_REG_VOLT_MAX(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0x7C; + break; + case 1: + return 0x69; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0x7F; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0x7E; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x4B; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x49; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x68; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0x7D; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x6C; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x6B; + break; + case 10: + return 0x6A; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x50; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x4C; + break; + } + return -ENODEV; +} + +static int ADT7462_REG_VOLT_MIN(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0x6D; + break; + case 1: + return 0x72; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0x6F; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0x71; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x47; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x45; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x70; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0x6E; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x75; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x74; + break; + case 10: + return 0x73; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x76; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x77; + break; + } + return -ENODEV; +} + +static int ADT7462_REG_VOLT(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0xA3; + break; + case 1: + return 0x90; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0xA9; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0xA7; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x8F; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x8B; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x96; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0xA5; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x93; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x92; + break; + case 10: + return 0x91; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x94; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x95; + break; + } + return -ENODEV; +} + +/* Provide labels for sysfs */ +static const char *voltage_label(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return "+12V1"; + break; + case 1: + switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) { + case 0: + return "Vccp1"; + case 1: + return "+2.5V"; + case 2: + return "+1.8V"; + case 3: + return "+1.5V"; + } + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return "+12V3"; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return "+5V"; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return "+0.9V"; + return "+1.25V"; + } + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return "+1.8V"; + return "+2.5V"; + } + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return "+3.3V"; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return "+12V2"; + break; + case 8: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) { + case 0: + return "Vbatt"; + case 1: + return "FSB_Vtt"; + } + break; + case 9: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) { + case 0: + return "+3.3V"; + case 1: + return "+1.2V1"; + } + break; + case 10: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) { + case 0: + return "Vccp2"; + case 1: + return "+2.5V"; + case 2: + return "+1.8V"; + case 3: + return "+1.5"; + } + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return "+1.5V ICH"; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return "+1.5V 3GPIO"; + break; + } + return "N/A"; +} + +/* Multipliers are actually in uV, not mV. */ +static int voltage_multiplier(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 62500; + break; + case 1: + switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) { + case 0: + if (data->pin_cfg[0] & ADT7462_VID_INPUT) + return 12500; + return 6250; + case 1: + return 13000; + case 2: + return 9400; + case 3: + return 7800; + } + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 62500; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 26000; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return 4690; + return 6500; + } + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN15_INPUT) + return 9400; + return 13000; + } + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 17200; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 62500; + break; + case 8: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) { + case 0: + return 15600; + case 1: + return 6250; + } + break; + case 9: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) { + case 0: + return 17200; + case 1: + return 6250; + } + break; + case 10: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) { + case 0: + return 6250; + case 1: + return 13000; + case 2: + return 9400; + case 3: + return 7800; + } + case 11: + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 7800; + } + return 0; +} + +static int temp_enabled(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + case 2: + return 1; + case 1: + if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT) + return 1; + break; + case 3: + if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT) + return 1; + break; + } + return 0; +} + +static const char *temp_label(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + return "local"; + case 1: + if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT) + return "remote1"; + break; + case 2: + return "remote2"; + case 3: + if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT) + return "remote3"; + break; + } + return "N/A"; +} + +/* Map Trange register values to mC */ +#define NUM_TRANGE_VALUES 16 +static const int trange_values[NUM_TRANGE_VALUES] = { + 2000, + 2500, + 3300, + 4000, + 5000, + 6700, + 8000, + 10000, + 13300, + 16000, + 20000, + 26700, + 32000, + 40000, + 53300, + 80000 +}; + +static int find_trange_value(int trange) +{ + int i; + + for (i = 0; i < NUM_TRANGE_VALUES; i++) + if (trange_values[i] == trange) + return i; + + return -ENODEV; +} + +static struct adt7462_data *adt7462_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + unsigned long local_jiffies = jiffies; + int i; + + mutex_lock(&data->lock); + if (time_before(local_jiffies, data->sensors_last_updated + + SENSOR_REFRESH_INTERVAL) + && data->sensors_valid) + goto no_sensor_update; + + for (i = 0; i < ADT7462_TEMP_COUNT; i++) { + /* + * Reading the fractional register locks the integral + * register until both have been read. + */ + data->temp_frac[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_REG(i)); + data->temp[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_REG(i) + 1); + } + + for (i = 0; i < ADT7462_FAN_COUNT; i++) + data->fan[i] = adt7462_read_word_data(client, + ADT7462_REG_FAN(i)); + + data->fan_enabled = i2c_smbus_read_byte_data(client, + ADT7462_REG_FAN_ENABLE); + + for (i = 0; i < ADT7462_PWM_COUNT; i++) + data->pwm[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM(i)); + + for (i = 0; i < ADT7462_PIN_CFG_REG_COUNT; i++) + data->pin_cfg[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PIN_CFG(i)); + + for (i = 0; i < ADT7462_VOLT_COUNT; i++) { + int reg = ADT7462_REG_VOLT(data, i); + if (!reg) + data->voltages[i] = 0; + else + data->voltages[i] = i2c_smbus_read_byte_data(client, + reg); + } + + data->alarms[0] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM1); + data->alarms[1] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM2); + data->alarms[2] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM3); + data->alarms[3] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM4); + + data->sensors_last_updated = local_jiffies; + data->sensors_valid = 1; + +no_sensor_update: + if (time_before(local_jiffies, data->limits_last_updated + + LIMIT_REFRESH_INTERVAL) + && data->limits_valid) + goto out; + + for (i = 0; i < ADT7462_TEMP_COUNT; i++) { + data->temp_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_MIN_REG(i)); + data->temp_max[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_MAX_REG(i)); + } + + for (i = 0; i < ADT7462_FAN_COUNT; i++) + data->fan_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_FAN_MIN(i)); + + for (i = 0; i < ADT7462_VOLT_COUNT; i++) { + int reg = ADT7462_REG_VOLT_MAX(data, i); + data->volt_max[i] = + (reg ? i2c_smbus_read_byte_data(client, reg) : 0); + + reg = ADT7462_REG_VOLT_MIN(data, i); + data->volt_min[i] = + (reg ? i2c_smbus_read_byte_data(client, reg) : 0); + } + + for (i = 0; i < ADT7462_PWM_COUNT; i++) { + data->pwm_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_MIN(i)); + data->pwm_tmin[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_TMIN(i)); + data->pwm_trange[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_TRANGE(i)); + data->pwm_cfg[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_CFG(i)); + } + + data->pwm_max = i2c_smbus_read_byte_data(client, ADT7462_REG_PWM_MAX); + + data->cfg2 = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2); + + data->limits_last_updated = local_jiffies; + data->limits_valid = 1; + +out: + mutex_unlock(&data->lock); + return data; +} + +static ssize_t show_temp_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp_min[attr->index] - 64)); +} + +static ssize_t set_temp_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000) + 64; + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->temp_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_TEMP_MIN_REG(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp_max[attr->index] - 64)); +} + +static ssize_t set_temp_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000) + 64; + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->temp_max[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_TEMP_MAX_REG(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + u8 frac = data->temp_frac[attr->index] >> TEMP_FRAC_OFFSET; + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp[attr->index] - 64) + + 250 * frac); +} + +static ssize_t show_temp_label(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + return sprintf(buf, "%s\n", temp_label(data, attr->index)); +} + +static ssize_t show_volt_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->volt_max[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t set_volt_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int x = voltage_multiplier(data, attr->index); + long temp; + + if (strict_strtol(buf, 10, &temp) || !x) + return -EINVAL; + + temp *= 1000; /* convert mV to uV */ + temp = ROUND_DIV(temp, x); + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->volt_max[attr->index] = temp; + i2c_smbus_write_byte_data(client, + ADT7462_REG_VOLT_MAX(data, attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_volt_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->volt_min[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t set_volt_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int x = voltage_multiplier(data, attr->index); + long temp; + + if (strict_strtol(buf, 10, &temp) || !x) + return -EINVAL; + + temp *= 1000; /* convert mV to uV */ + temp = ROUND_DIV(temp, x); + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->volt_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, + ADT7462_REG_VOLT_MIN(data, attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_voltage(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->voltages[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t show_voltage_label(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + return sprintf(buf, "%s\n", voltage_label(data, attr->index)); +} + +static ssize_t show_alarm(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int reg = attr->index >> ADT7462_ALARM_REG_SHIFT; + int mask = attr->index & ADT7462_ALARM_FLAG_MASK; + + if (data->alarms[reg] & mask) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + +static int fan_enabled(struct adt7462_data *data, int fan) +{ + return data->fan_enabled & (1 << fan); +} + +static ssize_t show_fan_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + u16 temp; + + /* Only the MSB of the min fan period is stored... */ + temp = data->fan_min[attr->index]; + temp <<= 8; + + if (!fan_enabled(data, attr->index) || + !FAN_DATA_VALID(temp)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", FAN_PERIOD_TO_RPM(temp)); +} + +static ssize_t set_fan_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp || + !fan_enabled(data, attr->index)) + return -EINVAL; + + temp = FAN_RPM_TO_PERIOD(temp); + temp >>= 8; + temp = SENSORS_LIMIT(temp, 1, 255); + + mutex_lock(&data->lock); + data->fan_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_FAN_MIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!fan_enabled(data, attr->index) || + !FAN_DATA_VALID(data->fan[attr->index])) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", + FAN_PERIOD_TO_RPM(data->fan[attr->index])); +} + +static ssize_t show_force_pwm_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", (data->cfg2 & ADT7462_FSPD_MASK ? 1 : 0)); +} + +static ssize_t set_force_pwm_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + u8 reg; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + mutex_lock(&data->lock); + reg = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2); + if (temp) + reg |= ADT7462_FSPD_MASK; + else + reg &= ~ADT7462_FSPD_MASK; + data->cfg2 = reg; + i2c_smbus_write_byte_data(client, ADT7462_REG_CFG2, reg); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm[attr->index]); +} + +static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM(attr->index), temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_max); +} + +static ssize_t set_pwm_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm_max = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MAX, temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_min[attr->index]); +} + +static ssize_t set_pwm_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_hyst(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", 1000 * + (data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK)); +} + +static ssize_t set_pwm_hyst(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 15); + + /* package things up */ + temp &= ADT7462_PWM_HYST_MASK; + temp |= data->pwm_trange[attr->index] & ADT7462_PWM_RANGE_MASK; + + mutex_lock(&data->lock); + data->pwm_trange[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_tmax(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + /* tmax = tmin + trange */ + int trange = trange_values[data->pwm_trange[attr->index] >> + ADT7462_PWM_RANGE_SHIFT]; + int tmin = (data->pwm_tmin[attr->index] - 64) * 1000; + + return sprintf(buf, "%d\n", tmin + trange); +} + +static ssize_t set_pwm_tmax(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + int temp; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int tmin, trange_value; + long trange; + + if (strict_strtol(buf, 10, &trange)) + return -EINVAL; + + /* trange = tmax - tmin */ + tmin = (data->pwm_tmin[attr->index] - 64) * 1000; + trange_value = find_trange_value(trange - tmin); + + if (trange_value < 0) + return -EINVAL; + + temp = trange_value << ADT7462_PWM_RANGE_SHIFT; + temp |= data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK; + + mutex_lock(&data->lock); + data->pwm_trange[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_tmin(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", 1000 * (data->pwm_tmin[attr->index] - 64)); +} + +static ssize_t set_pwm_tmin(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000) + 64; + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm_tmin[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TMIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_auto(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int cfg = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT; + + switch (cfg) { + case 4: /* off */ + return sprintf(buf, "0\n"); + case 7: /* manual */ + return sprintf(buf, "1\n"); + default: /* automatic */ + return sprintf(buf, "2\n"); + } +} + +static void set_pwm_channel(struct i2c_client *client, + struct adt7462_data *data, + int which, + int value) +{ + int temp = data->pwm_cfg[which] & ~ADT7462_PWM_CHANNEL_MASK; + temp |= value << ADT7462_PWM_CHANNEL_SHIFT; + + mutex_lock(&data->lock); + data->pwm_cfg[which] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_CFG(which), temp); + mutex_unlock(&data->lock); +} + +static ssize_t set_pwm_auto(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + switch (temp) { + case 0: /* off */ + set_pwm_channel(client, data, attr->index, 4); + return count; + case 1: /* manual */ + set_pwm_channel(client, data, attr->index, 7); + return count; + default: + return -EINVAL; + } +} + +static ssize_t show_pwm_auto_temp(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int channel = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT; + + switch (channel) { + case 0: /* temp[1234] only */ + case 1: + case 2: + case 3: + return sprintf(buf, "%d\n", (1 << channel)); + case 5: /* temp1 & temp4 */ + return sprintf(buf, "9\n"); + case 6: + return sprintf(buf, "15\n"); + default: + return sprintf(buf, "0\n"); + } +} + +static int cvt_auto_temp(int input) +{ + if (input == 0xF) + return 6; + if (input == 0x9) + return 5; + if (input < 1 || !is_power_of_2(input)) + return -EINVAL; + return ilog2(input); +} + +static ssize_t set_pwm_auto_temp(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = cvt_auto_temp(temp); + if (temp < 0) + return temp; + + set_pwm_channel(client, data, attr->index, temp); + + return count; +} + +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 0); +static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 1); +static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 2); +static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 3); + +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 0); +static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 1); +static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 2); +static SENSOR_DEVICE_ATTR(temp4_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 3); + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3); + +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_temp_label, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_temp_label, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, show_temp_label, NULL, 3); + +static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_LT_ALARM); +static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R1T_ALARM); +static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R2T_ALARM); +static SENSOR_DEVICE_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R3T_ALARM); + +static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 0); +static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 1); +static SENSOR_DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 2); +static SENSOR_DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 3); +static SENSOR_DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 4); +static SENSOR_DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 5); +static SENSOR_DEVICE_ATTR(in7_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 6); +static SENSOR_DEVICE_ATTR(in8_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 7); +static SENSOR_DEVICE_ATTR(in9_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 8); +static SENSOR_DEVICE_ATTR(in10_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 9); +static SENSOR_DEVICE_ATTR(in11_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 10); +static SENSOR_DEVICE_ATTR(in12_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 11); +static SENSOR_DEVICE_ATTR(in13_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 12); + +static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 0); +static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 1); +static SENSOR_DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 2); +static SENSOR_DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 3); +static SENSOR_DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 4); +static SENSOR_DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 5); +static SENSOR_DEVICE_ATTR(in7_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 6); +static SENSOR_DEVICE_ATTR(in8_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 7); +static SENSOR_DEVICE_ATTR(in9_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 8); +static SENSOR_DEVICE_ATTR(in10_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 9); +static SENSOR_DEVICE_ATTR(in11_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 10); +static SENSOR_DEVICE_ATTR(in12_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 11); +static SENSOR_DEVICE_ATTR(in13_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 12); + +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_voltage, NULL, 2); +static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_voltage, NULL, 3); +static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 4); +static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 5); +static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 6); +static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_voltage, NULL, 7); +static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_voltage, NULL, 8); +static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_voltage, NULL, 9); +static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_voltage, NULL, 10); +static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_voltage, NULL, 11); +static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, show_voltage, NULL, 12); + +static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_voltage_label, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_voltage_label, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_voltage_label, NULL, 2); +static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_voltage_label, NULL, 3); +static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_voltage_label, NULL, 4); +static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_voltage_label, NULL, 5); +static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_voltage_label, NULL, 6); +static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_voltage_label, NULL, 7); +static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_voltage_label, NULL, 8); +static SENSOR_DEVICE_ATTR(in10_label, S_IRUGO, show_voltage_label, NULL, 9); +static SENSOR_DEVICE_ATTR(in11_label, S_IRUGO, show_voltage_label, NULL, 10); +static SENSOR_DEVICE_ATTR(in12_label, S_IRUGO, show_voltage_label, NULL, 11); +static SENSOR_DEVICE_ATTR(in13_label, S_IRUGO, show_voltage_label, NULL, 12); + +static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V0_ALARM); +static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V7_ALARM); +static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V2_ALARM); +static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V6_ALARM); +static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V5_ALARM); +static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V4_ALARM); +static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V3_ALARM); +static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V1_ALARM); +static SENSOR_DEVICE_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V10_ALARM); +static SENSOR_DEVICE_ATTR(in10_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V9_ALARM); +static SENSOR_DEVICE_ATTR(in11_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V8_ALARM); +static SENSOR_DEVICE_ATTR(in12_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V11_ALARM); +static SENSOR_DEVICE_ATTR(in13_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V12_ALARM); + +static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 0); +static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 1); +static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 2); +static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 3); +static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 4); +static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 5); +static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 6); +static SENSOR_DEVICE_ATTR(fan8_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 7); + +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); +static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); +static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3); +static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4); +static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 5); +static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 6); +static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan, NULL, 7); + +static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F0_ALARM); +static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F1_ALARM); +static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F2_ALARM); +static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F3_ALARM); +static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F4_ALARM); +static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F5_ALARM); +static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F6_ALARM); +static SENSOR_DEVICE_ATTR(fan8_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F7_ALARM); + +static SENSOR_DEVICE_ATTR(force_pwm_max, S_IWUSR | S_IRUGO, + show_force_pwm_max, set_force_pwm_max, 0); + +static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0); +static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1); +static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2); +static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 3); + +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 0); +static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 1); +static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 2); +static SENSOR_DEVICE_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 3); + +static struct attribute *adt7462_attr[] = +{ + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp4_max.dev_attr.attr, + + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp4_min.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp4_input.dev_attr.attr, + + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp2_label.dev_attr.attr, + &sensor_dev_attr_temp3_label.dev_attr.attr, + &sensor_dev_attr_temp4_label.dev_attr.attr, + + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_alarm.dev_attr.attr, + &sensor_dev_attr_temp4_alarm.dev_attr.attr, + + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, + &sensor_dev_attr_in7_max.dev_attr.attr, + &sensor_dev_attr_in8_max.dev_attr.attr, + &sensor_dev_attr_in9_max.dev_attr.attr, + &sensor_dev_attr_in10_max.dev_attr.attr, + &sensor_dev_attr_in11_max.dev_attr.attr, + &sensor_dev_attr_in12_max.dev_attr.attr, + &sensor_dev_attr_in13_max.dev_attr.attr, + + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in7_min.dev_attr.attr, + &sensor_dev_attr_in8_min.dev_attr.attr, + &sensor_dev_attr_in9_min.dev_attr.attr, + &sensor_dev_attr_in10_min.dev_attr.attr, + &sensor_dev_attr_in11_min.dev_attr.attr, + &sensor_dev_attr_in12_min.dev_attr.attr, + &sensor_dev_attr_in13_min.dev_attr.attr, + + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in9_input.dev_attr.attr, + &sensor_dev_attr_in10_input.dev_attr.attr, + &sensor_dev_attr_in11_input.dev_attr.attr, + &sensor_dev_attr_in12_input.dev_attr.attr, + &sensor_dev_attr_in13_input.dev_attr.attr, + + &sensor_dev_attr_in1_label.dev_attr.attr, + &sensor_dev_attr_in2_label.dev_attr.attr, + &sensor_dev_attr_in3_label.dev_attr.attr, + &sensor_dev_attr_in4_label.dev_attr.attr, + &sensor_dev_attr_in5_label.dev_attr.attr, + &sensor_dev_attr_in6_label.dev_attr.attr, + &sensor_dev_attr_in7_label.dev_attr.attr, + &sensor_dev_attr_in8_label.dev_attr.attr, + &sensor_dev_attr_in9_label.dev_attr.attr, + &sensor_dev_attr_in10_label.dev_attr.attr, + &sensor_dev_attr_in11_label.dev_attr.attr, + &sensor_dev_attr_in12_label.dev_attr.attr, + &sensor_dev_attr_in13_label.dev_attr.attr, + + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, + &sensor_dev_attr_in6_alarm.dev_attr.attr, + &sensor_dev_attr_in7_alarm.dev_attr.attr, + &sensor_dev_attr_in8_alarm.dev_attr.attr, + &sensor_dev_attr_in9_alarm.dev_attr.attr, + &sensor_dev_attr_in10_alarm.dev_attr.attr, + &sensor_dev_attr_in11_alarm.dev_attr.attr, + &sensor_dev_attr_in12_alarm.dev_attr.attr, + &sensor_dev_attr_in13_alarm.dev_attr.attr, + + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, + &sensor_dev_attr_fan4_min.dev_attr.attr, + &sensor_dev_attr_fan5_min.dev_attr.attr, + &sensor_dev_attr_fan6_min.dev_attr.attr, + &sensor_dev_attr_fan7_min.dev_attr.attr, + &sensor_dev_attr_fan8_min.dev_attr.attr, + + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan5_input.dev_attr.attr, + &sensor_dev_attr_fan6_input.dev_attr.attr, + &sensor_dev_attr_fan7_input.dev_attr.attr, + &sensor_dev_attr_fan8_input.dev_attr.attr, + + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + &sensor_dev_attr_fan3_alarm.dev_attr.attr, + &sensor_dev_attr_fan4_alarm.dev_attr.attr, + &sensor_dev_attr_fan5_alarm.dev_attr.attr, + &sensor_dev_attr_fan6_alarm.dev_attr.attr, + &sensor_dev_attr_fan7_alarm.dev_attr.attr, + &sensor_dev_attr_fan8_alarm.dev_attr.attr, + + &sensor_dev_attr_force_pwm_max.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm3.dev_attr.attr, + &sensor_dev_attr_pwm4.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_point1_pwm.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_point2_pwm.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point1_hyst.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point2_hyst.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point1_temp.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point2_temp.dev_attr.attr, + + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm4_enable.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_channels_temp.dev_attr.attr, + NULL +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adt7462_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (kind <= 0) { + int vendor, device, revision; + + vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR); + if (vendor != ADT7462_VENDOR) + return -ENODEV; + + device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE); + if (device != ADT7462_DEVICE) + return -ENODEV; + + revision = i2c_smbus_read_byte_data(client, + ADT7462_REG_REVISION); + if (revision != ADT7462_REVISION) + return -ENODEV; + } else + dev_dbg(&adapter->dev, "detection forced\n"); + + strlcpy(info->type, "adt7462", I2C_NAME_SIZE); + + return 0; +} + +static int adt7462_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adt7462_data *data; + int err; + + data = kzalloc(sizeof(struct adt7462_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "%s chip found\n", client->name); + + /* Register sysfs hooks */ + data->attrs.attrs = adt7462_attr; + err = sysfs_create_group(&client->dev.kobj, &data->attrs); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &data->attrs); +exit_free: + kfree(data); +exit: + return err; +} + +static int adt7462_remove(struct i2c_client *client) +{ + struct adt7462_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &data->attrs); + kfree(data); + return 0; +} + +static int __init adt7462_init(void) +{ + return i2c_add_driver(&adt7462_driver); +} + +static void __exit adt7462_exit(void) +{ + i2c_del_driver(&adt7462_driver); +} + +MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>"); +MODULE_DESCRIPTION("ADT7462 driver"); +MODULE_LICENSE("GPL"); + +module_init(adt7462_init); +module_exit(adt7462_exit); diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index d368d8f845e1..1311a595147e 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -137,6 +137,8 @@ I2C_CLIENT_INSMOD_1(adt7470); #define FAN_PERIOD_INVALID 65535 #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor)) + struct adt7470_data { struct device *hwmon_dev; struct attribute_group attrs; @@ -353,7 +355,13 @@ static ssize_t set_temp_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->temp_min[attr->index] = temp; @@ -381,7 +389,13 @@ static ssize_t set_temp_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->temp_max[attr->index] = temp; @@ -430,11 +444,13 @@ static ssize_t set_fan_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + temp = SENSORS_LIMIT(temp, 1, 65534); mutex_lock(&data->lock); data->fan_max[attr->index] = temp; @@ -465,11 +481,13 @@ static ssize_t set_fan_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + temp = SENSORS_LIMIT(temp, 1, 65534); mutex_lock(&data->lock); data->fan_min[attr->index] = temp; @@ -507,9 +525,12 @@ static ssize_t set_force_pwm_max(struct device *dev, { struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + mutex_lock(&data->lock); data->force_pwm_max = temp; reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG); @@ -537,7 +558,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm[attr->index] = temp; @@ -564,7 +590,12 @@ static ssize_t set_pwm_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_max[attr->index] = temp; @@ -592,7 +623,12 @@ static ssize_t set_pwm_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_min[attr->index] = temp; @@ -630,7 +666,13 @@ static ssize_t set_pwm_tmin(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_tmin[attr->index] = temp; @@ -658,11 +700,14 @@ static ssize_t set_pwm_auto(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); int pwm_auto_reg = ADT7470_REG_PWM_CFG(attr->index); int pwm_auto_reg_mask; + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + if (attr->index % 2) pwm_auto_reg_mask = ADT7470_PWM2_AUTO_MASK; else @@ -716,10 +761,14 @@ static ssize_t set_pwm_auto_temp(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = cvt_auto_temp(simple_strtol(buf, NULL, 10)); int pwm_auto_reg = ADT7470_REG_PWM_AUTO_TEMP(attr->index); + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = cvt_auto_temp(temp); if (temp < 0) return temp; diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c index b9a8ea30c99c..18aa30866a6c 100644 --- a/drivers/hwmon/adt7473.c +++ b/drivers/hwmon/adt7473.c @@ -129,6 +129,8 @@ I2C_CLIENT_INSMOD_1(adt7473); #define FAN_PERIOD_INVALID 65535 #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor)) + struct adt7473_data { struct device *hwmon_dev; struct attribute_group attrs; @@ -357,7 +359,12 @@ static ssize_t set_volt_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10)); + long volt; + + if (strict_strtol(buf, 10, &volt)) + return -EINVAL; + + volt = encode_volt(attr->index, volt); mutex_lock(&data->lock); data->volt_min[attr->index] = volt; @@ -386,7 +393,12 @@ static ssize_t set_volt_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10)); + long volt; + + if (strict_strtol(buf, 10, &volt)) + return -EINVAL; + + volt = encode_volt(attr->index, volt); mutex_lock(&data->lock); data->volt_max[attr->index] = volt; @@ -419,7 +431,8 @@ static int decode_temp(u8 twos_complement, u8 raw) static u8 encode_temp(u8 twos_complement, int cooked) { - return twos_complement ? cooked & 0xFF : cooked + 64; + u8 ret = twos_complement ? cooked & 0xFF : cooked + 64; + return SENSORS_LIMIT(ret, 0, 255); } static ssize_t show_temp_min(struct device *dev, @@ -441,7 +454,12 @@ static ssize_t set_temp_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -472,7 +490,12 @@ static ssize_t set_temp_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -515,11 +538,13 @@ static ssize_t set_fan_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + temp = SENSORS_LIMIT(temp, 1, 65534); mutex_lock(&data->lock); data->fan_min[attr->index] = temp; @@ -558,7 +583,10 @@ static ssize_t set_max_duty_at_crit(struct device *dev, u8 reg; struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; mutex_lock(&data->lock); data->max_duty_at_overheat = !!temp; @@ -587,7 +615,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm[attr->index] = temp; @@ -614,7 +647,12 @@ static ssize_t set_pwm_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_max[attr->index] = temp; @@ -642,7 +680,12 @@ static ssize_t set_pwm_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_min[attr->index] = temp; @@ -672,7 +715,12 @@ static ssize_t set_temp_tmax(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -703,7 +751,12 @@ static ssize_t set_temp_tmin(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -741,7 +794,10 @@ static ssize_t set_pwm_enable(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; switch (temp) { case 0: @@ -805,7 +861,10 @@ static ssize_t set_pwm_auto_temp(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; switch (temp) { case 1: diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index be3285912cb7..086c2a5cef0b 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -128,6 +128,9 @@ static const char* temperature_sensors_sets[][36] = { /* Set 13: iMac 8,1 */ { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TG0P", "TH0P", "TL0P", "TO0P", "TW0P", "Tm0P", "Tp0P", NULL }, +/* Set 14: iMac 6,1 */ + { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TG0P", "TH0P", + "TO0P", "Tp0P", NULL }, }; /* List of keys used to read/write fan speeds */ @@ -1280,7 +1283,7 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = { { .accelerometer = 0, .light = 0, .temperature_set = 4 }, /* iMac: temperature set 5 */ { .accelerometer = 0, .light = 0, .temperature_set = 5 }, -/* MacBook3: accelerometer and temperature set 6 */ +/* MacBook3, MacBook4: accelerometer and temperature set 6 */ { .accelerometer = 1, .light = 0, .temperature_set = 6 }, /* MacBook Air: accelerometer, backlight and temperature set 7 */ { .accelerometer = 1, .light = 1, .temperature_set = 7 }, @@ -1296,6 +1299,8 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = { { .accelerometer = 1, .light = 1, .temperature_set = 12 }, /* iMac 8: light sensor only, temperature set 13 */ { .accelerometer = 0, .light = 0, .temperature_set = 13 }, +/* iMac 6: light sensor only, temperature set 14 */ + { .accelerometer = 0, .light = 0, .temperature_set = 14 }, }; /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1". @@ -1329,6 +1334,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") }, &applesmc_dmi_data[6]}, + { applesmc_dmi_match, "Apple MacBook 4", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook4") }, + &applesmc_dmi_data[6]}, { applesmc_dmi_match, "Apple MacBook 5", { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5") }, @@ -1345,10 +1354,18 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") }, &applesmc_dmi_data[4]}, + { applesmc_dmi_match, "Apple MacPro", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") }, + &applesmc_dmi_data[4]}, { applesmc_dmi_match, "Apple iMac 8", { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "iMac8") }, &applesmc_dmi_data[13]}, + { applesmc_dmi_match, "Apple iMac 6", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "iMac6") }, + &applesmc_dmi_data[14]}, { applesmc_dmi_match, "Apple iMac 5", { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "iMac5") }, @@ -1547,3 +1564,4 @@ module_exit(applesmc_exit); MODULE_AUTHOR("Nicolas Boichat"); MODULE_DESCRIPTION("Apple SMC"); MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(dmi, applesmc_whitelist); diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c index 7b0ed5dea399..fe74609a7feb 100644 --- a/drivers/hwmon/ibmaem.c +++ b/drivers/hwmon/ibmaem.c @@ -88,9 +88,11 @@ static DEFINE_IDR(aem_idr); static DEFINE_SPINLOCK(aem_idr_lock); -static struct device_driver aem_driver = { - .name = DRVNAME, - .bus = &platform_bus_type, +static struct platform_driver aem_driver = { + .driver = { + .name = DRVNAME, + .bus = &platform_bus_type, + } }; struct aem_ipmi_data { @@ -583,7 +585,7 @@ static int aem_init_aem1_inst(struct aem_ipmi_data *probe, u8 module_handle) data->pdev = platform_device_alloc(DRVNAME, data->id); if (!data->pdev) goto dev_err; - data->pdev->dev.driver = &aem_driver; + data->pdev->dev.driver = &aem_driver.driver; res = platform_device_add(data->pdev); if (res) @@ -716,7 +718,7 @@ static int aem_init_aem2_inst(struct aem_ipmi_data *probe, data->pdev = platform_device_alloc(DRVNAME, data->id); if (!data->pdev) goto dev_err; - data->pdev->dev.driver = &aem_driver; + data->pdev->dev.driver = &aem_driver.driver; res = platform_device_add(data->pdev); if (res) @@ -1085,7 +1087,7 @@ static int __init aem_init(void) { int res; - res = driver_register(&aem_driver); + res = driver_register(&aem_driver.driver); if (res) { printk(KERN_ERR "Can't register aem driver\n"); return res; @@ -1097,7 +1099,7 @@ static int __init aem_init(void) return 0; ipmi_reg_err: - driver_unregister(&aem_driver); + driver_unregister(&aem_driver.driver); return res; } @@ -1107,7 +1109,7 @@ static void __exit aem_exit(void) struct aem_data *p1, *next1; ipmi_smi_watcher_unregister(&driver_data.bmc_events); - driver_unregister(&aem_driver); + driver_unregister(&aem_driver.driver); list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list) aem_delete(p1); } diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c new file mode 100644 index 000000000000..c002144c76bc --- /dev/null +++ b/drivers/hwmon/lis3lv02d.c @@ -0,0 +1,581 @@ +/* + * lis3lv02d.c - ST LIS3LV02DL accelerometer driver + * + * Copyright (C) 2007-2008 Yan Burman + * Copyright (C) 2008 Eric Piel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/dmi.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/kthread.h> +#include <linux/semaphore.h> +#include <linux/delay.h> +#include <linux/wait.h> +#include <linux/poll.h> +#include <linux/freezer.h> +#include <linux/uaccess.h> +#include <acpi/acpi_drivers.h> +#include <asm/atomic.h> +#include "lis3lv02d.h" + +#define DRIVER_NAME "lis3lv02d" +#define ACPI_MDPS_CLASS "accelerometer" + +/* joystick device poll interval in milliseconds */ +#define MDPS_POLL_INTERVAL 50 +/* + * The sensor can also generate interrupts (DRDY) but it's pretty pointless + * because their are generated even if the data do not change. So it's better + * to keep the interrupt for the free-fall event. The values are updated at + * 40Hz (at the lowest frequency), but as it can be pretty time consuming on + * some low processor, we poll the sensor only at 20Hz... enough for the + * joystick. + */ + +/* Maximum value our axis may get for the input device (signed 12 bits) */ +#define MDPS_MAX_VAL 2048 + +struct axis_conversion { + s8 x; + s8 y; + s8 z; +}; + +struct acpi_lis3lv02d { + struct acpi_device *device; /* The ACPI device */ + struct input_dev *idev; /* input device */ + struct task_struct *kthread; /* kthread for input */ + struct mutex lock; + struct platform_device *pdev; /* platform device */ + atomic_t count; /* interrupt count after last read */ + int xcalib; /* calibrated null value for x */ + int ycalib; /* calibrated null value for y */ + int zcalib; /* calibrated null value for z */ + unsigned char is_on; /* whether the device is on or off */ + unsigned char usage; /* usage counter */ + struct axis_conversion ac; /* hw -> logical axis */ +}; + +static struct acpi_lis3lv02d adev; + +static int lis3lv02d_remove_fs(void); +static int lis3lv02d_add_fs(struct acpi_device *device); + +/* For automatic insertion of the module */ +static struct acpi_device_id lis3lv02d_device_ids[] = { + {"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */ + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids); + +/** + * lis3lv02d_acpi_init - ACPI _INI method: initialize the device. + * @handle: the handle of the device + * + * Returns AE_OK on success. + */ +static inline acpi_status lis3lv02d_acpi_init(acpi_handle handle) +{ + return acpi_evaluate_object(handle, METHOD_NAME__INI, NULL, NULL); +} + +/** + * lis3lv02d_acpi_read - ACPI ALRD method: read a register + * @handle: the handle of the device + * @reg: the register to read + * @ret: result of the operation + * + * Returns AE_OK on success. + */ +static acpi_status lis3lv02d_acpi_read(acpi_handle handle, int reg, u8 *ret) +{ + union acpi_object arg0 = { ACPI_TYPE_INTEGER }; + struct acpi_object_list args = { 1, &arg0 }; + unsigned long long lret; + acpi_status status; + + arg0.integer.value = reg; + + status = acpi_evaluate_integer(handle, "ALRD", &args, &lret); + *ret = lret; + return status; +} + +/** + * lis3lv02d_acpi_write - ACPI ALWR method: write to a register + * @handle: the handle of the device + * @reg: the register to write to + * @val: the value to write + * + * Returns AE_OK on success. + */ +static acpi_status lis3lv02d_acpi_write(acpi_handle handle, int reg, u8 val) +{ + unsigned long long ret; /* Not used when writting */ + union acpi_object in_obj[2]; + struct acpi_object_list args = { 2, in_obj }; + + in_obj[0].type = ACPI_TYPE_INTEGER; + in_obj[0].integer.value = reg; + in_obj[1].type = ACPI_TYPE_INTEGER; + in_obj[1].integer.value = val; + + return acpi_evaluate_integer(handle, "ALWR", &args, &ret); +} + +static s16 lis3lv02d_read_16(acpi_handle handle, int reg) +{ + u8 lo, hi; + + lis3lv02d_acpi_read(handle, reg, &lo); + lis3lv02d_acpi_read(handle, reg + 1, &hi); + /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */ + return (s16)((hi << 8) | lo); +} + +/** + * lis3lv02d_get_axis - For the given axis, give the value converted + * @axis: 1,2,3 - can also be negative + * @hw_values: raw values returned by the hardware + * + * Returns the converted value. + */ +static inline int lis3lv02d_get_axis(s8 axis, int hw_values[3]) +{ + if (axis > 0) + return hw_values[axis - 1]; + else + return -hw_values[-axis - 1]; +} + +/** + * lis3lv02d_get_xyz - Get X, Y and Z axis values from the accelerometer + * @handle: the handle to the device + * @x: where to store the X axis value + * @y: where to store the Y axis value + * @z: where to store the Z axis value + * + * Note that 40Hz input device can eat up about 10% CPU at 800MHZ + */ +static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z) +{ + int position[3]; + + position[0] = lis3lv02d_read_16(handle, OUTX_L); + position[1] = lis3lv02d_read_16(handle, OUTY_L); + position[2] = lis3lv02d_read_16(handle, OUTZ_L); + + *x = lis3lv02d_get_axis(adev.ac.x, position); + *y = lis3lv02d_get_axis(adev.ac.y, position); + *z = lis3lv02d_get_axis(adev.ac.z, position); +} + +static inline void lis3lv02d_poweroff(acpi_handle handle) +{ + adev.is_on = 0; + /* disable X,Y,Z axis and power down */ + lis3lv02d_acpi_write(handle, CTRL_REG1, 0x00); +} + +static void lis3lv02d_poweron(acpi_handle handle) +{ + u8 val; + + adev.is_on = 1; + lis3lv02d_acpi_init(handle); + lis3lv02d_acpi_write(handle, FF_WU_CFG, 0); + /* + * BDU: LSB and MSB values are not updated until both have been read. + * So the value read will always be correct. + * IEN: Interrupt for free-fall and DD, not for data-ready. + */ + lis3lv02d_acpi_read(handle, CTRL_REG2, &val); + val |= CTRL2_BDU | CTRL2_IEN; + lis3lv02d_acpi_write(handle, CTRL_REG2, val); +} + +#ifdef CONFIG_PM +static int lis3lv02d_suspend(struct acpi_device *device, pm_message_t state) +{ + /* make sure the device is off when we suspend */ + lis3lv02d_poweroff(device->handle); + return 0; +} + +static int lis3lv02d_resume(struct acpi_device *device) +{ + /* put back the device in the right state (ACPI might turn it on) */ + mutex_lock(&adev.lock); + if (adev.usage > 0) + lis3lv02d_poweron(device->handle); + else + lis3lv02d_poweroff(device->handle); + mutex_unlock(&adev.lock); + return 0; +} +#else +#define lis3lv02d_suspend NULL +#define lis3lv02d_resume NULL +#endif + + +/* + * To be called before starting to use the device. It makes sure that the + * device will always be on until a call to lis3lv02d_decrease_use(). Not to be + * used from interrupt context. + */ +static void lis3lv02d_increase_use(struct acpi_lis3lv02d *dev) +{ + mutex_lock(&dev->lock); + dev->usage++; + if (dev->usage == 1) { + if (!dev->is_on) + lis3lv02d_poweron(dev->device->handle); + } + mutex_unlock(&dev->lock); +} + +/* + * To be called whenever a usage of the device is stopped. + * It will make sure to turn off the device when there is not usage. + */ +static void lis3lv02d_decrease_use(struct acpi_lis3lv02d *dev) +{ + mutex_lock(&dev->lock); + dev->usage--; + if (dev->usage == 0) + lis3lv02d_poweroff(dev->device->handle); + mutex_unlock(&dev->lock); +} + +/** + * lis3lv02d_joystick_kthread - Kthread polling function + * @data: unused - here to conform to threadfn prototype + */ +static int lis3lv02d_joystick_kthread(void *data) +{ + int x, y, z; + + while (!kthread_should_stop()) { + lis3lv02d_get_xyz(adev.device->handle, &x, &y, &z); + input_report_abs(adev.idev, ABS_X, x - adev.xcalib); + input_report_abs(adev.idev, ABS_Y, y - adev.ycalib); + input_report_abs(adev.idev, ABS_Z, z - adev.zcalib); + + input_sync(adev.idev); + + try_to_freeze(); + msleep_interruptible(MDPS_POLL_INTERVAL); + } + + return 0; +} + +static int lis3lv02d_joystick_open(struct input_dev *input) +{ + lis3lv02d_increase_use(&adev); + adev.kthread = kthread_run(lis3lv02d_joystick_kthread, NULL, "klis3lv02d"); + if (IS_ERR(adev.kthread)) { + lis3lv02d_decrease_use(&adev); + return PTR_ERR(adev.kthread); + } + + return 0; +} + +static void lis3lv02d_joystick_close(struct input_dev *input) +{ + kthread_stop(adev.kthread); + lis3lv02d_decrease_use(&adev); +} + + +static inline void lis3lv02d_calibrate_joystick(void) +{ + lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib); +} + +static int lis3lv02d_joystick_enable(void) +{ + int err; + + if (adev.idev) + return -EINVAL; + + adev.idev = input_allocate_device(); + if (!adev.idev) + return -ENOMEM; + + lis3lv02d_calibrate_joystick(); + + adev.idev->name = "ST LIS3LV02DL Accelerometer"; + adev.idev->phys = DRIVER_NAME "/input0"; + adev.idev->id.bustype = BUS_HOST; + adev.idev->id.vendor = 0; + adev.idev->dev.parent = &adev.pdev->dev; + adev.idev->open = lis3lv02d_joystick_open; + adev.idev->close = lis3lv02d_joystick_close; + + set_bit(EV_ABS, adev.idev->evbit); + input_set_abs_params(adev.idev, ABS_X, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); + input_set_abs_params(adev.idev, ABS_Y, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); + input_set_abs_params(adev.idev, ABS_Z, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); + + err = input_register_device(adev.idev); + if (err) { + input_free_device(adev.idev); + adev.idev = NULL; + } + + return err; +} + +static void lis3lv02d_joystick_disable(void) +{ + if (!adev.idev) + return; + + input_unregister_device(adev.idev); + adev.idev = NULL; +} + + +/* + * Initialise the accelerometer and the various subsystems. + * Should be rather independant of the bus system. + */ +static int lis3lv02d_init_device(struct acpi_lis3lv02d *dev) +{ + mutex_init(&dev->lock); + lis3lv02d_add_fs(dev->device); + lis3lv02d_increase_use(dev); + + if (lis3lv02d_joystick_enable()) + printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n"); + + lis3lv02d_decrease_use(dev); + return 0; +} + +static int lis3lv02d_dmi_matched(const struct dmi_system_id *dmi) +{ + adev.ac = *((struct axis_conversion *)dmi->driver_data); + printk(KERN_INFO DRIVER_NAME ": hardware type %s found.\n", dmi->ident); + + return 1; +} + +/* Represents, for each axis seen by userspace, the corresponding hw axis (+1). + * If the value is negative, the opposite of the hw value is used. */ +static struct axis_conversion lis3lv02d_axis_normal = {1, 2, 3}; +static struct axis_conversion lis3lv02d_axis_y_inverted = {1, -2, 3}; +static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3}; +static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3}; +static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3}; +static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3}; + +#define AXIS_DMI_MATCH(_ident, _name, _axis) { \ + .ident = _ident, \ + .callback = lis3lv02d_dmi_matched, \ + .matches = { \ + DMI_MATCH(DMI_PRODUCT_NAME, _name) \ + }, \ + .driver_data = &lis3lv02d_axis_##_axis \ +} +static struct dmi_system_id lis3lv02d_dmi_ids[] = { + /* product names are truncated to match all kinds of a same model */ + AXIS_DMI_MATCH("NC64x0", "HP Compaq nc64", x_inverted), + AXIS_DMI_MATCH("NC84x0", "HP Compaq nc84", z_inverted), + AXIS_DMI_MATCH("NX9420", "HP Compaq nx9420", x_inverted), + AXIS_DMI_MATCH("NW9440", "HP Compaq nw9440", x_inverted), + AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted), + AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted), + AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left), + { NULL, } +/* Laptop models without axis info (yet): + * "NC651xx" "HP Compaq 651" + * "NC671xx" "HP Compaq 671" + * "NC6910" "HP Compaq 6910" + * HP Compaq 8710x Notebook PC / Mobile Workstation + * "NC2400" "HP Compaq nc2400" + * "NX74x0" "HP Compaq nx74" + * "NX6325" "HP Compaq nx6325" + * "NC4400" "HP Compaq nc4400" + */ +}; + +static int lis3lv02d_add(struct acpi_device *device) +{ + u8 val; + + if (!device) + return -EINVAL; + + adev.device = device; + strcpy(acpi_device_name(device), DRIVER_NAME); + strcpy(acpi_device_class(device), ACPI_MDPS_CLASS); + device->driver_data = &adev; + + lis3lv02d_acpi_read(device->handle, WHO_AM_I, &val); + if ((val != LIS3LV02DL_ID) && (val != LIS302DL_ID)) { + printk(KERN_ERR DRIVER_NAME + ": Accelerometer chip not LIS3LV02D{L,Q}\n"); + } + + /* If possible use a "standard" axes order */ + if (dmi_check_system(lis3lv02d_dmi_ids) == 0) { + printk(KERN_INFO DRIVER_NAME ": laptop model unknown, " + "using default axes configuration\n"); + adev.ac = lis3lv02d_axis_normal; + } + + return lis3lv02d_init_device(&adev); +} + +static int lis3lv02d_remove(struct acpi_device *device, int type) +{ + if (!device) + return -EINVAL; + + lis3lv02d_joystick_disable(); + lis3lv02d_poweroff(device->handle); + + return lis3lv02d_remove_fs(); +} + + +/* Sysfs stuff */ +static ssize_t lis3lv02d_position_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int x, y, z; + + lis3lv02d_increase_use(&adev); + lis3lv02d_get_xyz(adev.device->handle, &x, &y, &z); + lis3lv02d_decrease_use(&adev); + return sprintf(buf, "(%d,%d,%d)\n", x, y, z); +} + +static ssize_t lis3lv02d_calibrate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "(%d,%d,%d)\n", adev.xcalib, adev.ycalib, adev.zcalib); +} + +static ssize_t lis3lv02d_calibrate_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + lis3lv02d_increase_use(&adev); + lis3lv02d_calibrate_joystick(); + lis3lv02d_decrease_use(&adev); + return count; +} + +/* conversion btw sampling rate and the register values */ +static int lis3lv02dl_df_val[4] = {40, 160, 640, 2560}; +static ssize_t lis3lv02d_rate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u8 ctrl; + int val; + + lis3lv02d_increase_use(&adev); + lis3lv02d_acpi_read(adev.device->handle, CTRL_REG1, &ctrl); + lis3lv02d_decrease_use(&adev); + val = (ctrl & (CTRL1_DF0 | CTRL1_DF1)) >> 4; + return sprintf(buf, "%d\n", lis3lv02dl_df_val[val]); +} + +static DEVICE_ATTR(position, S_IRUGO, lis3lv02d_position_show, NULL); +static DEVICE_ATTR(calibrate, S_IRUGO|S_IWUSR, lis3lv02d_calibrate_show, + lis3lv02d_calibrate_store); +static DEVICE_ATTR(rate, S_IRUGO, lis3lv02d_rate_show, NULL); + +static struct attribute *lis3lv02d_attributes[] = { + &dev_attr_position.attr, + &dev_attr_calibrate.attr, + &dev_attr_rate.attr, + NULL +}; + +static struct attribute_group lis3lv02d_attribute_group = { + .attrs = lis3lv02d_attributes +}; + +static int lis3lv02d_add_fs(struct acpi_device *device) +{ + adev.pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0); + if (IS_ERR(adev.pdev)) + return PTR_ERR(adev.pdev); + + return sysfs_create_group(&adev.pdev->dev.kobj, &lis3lv02d_attribute_group); +} + +static int lis3lv02d_remove_fs(void) +{ + sysfs_remove_group(&adev.pdev->dev.kobj, &lis3lv02d_attribute_group); + platform_device_unregister(adev.pdev); + return 0; +} + +/* For the HP MDPS aka 3D Driveguard */ +static struct acpi_driver lis3lv02d_driver = { + .name = DRIVER_NAME, + .class = ACPI_MDPS_CLASS, + .ids = lis3lv02d_device_ids, + .ops = { + .add = lis3lv02d_add, + .remove = lis3lv02d_remove, + .suspend = lis3lv02d_suspend, + .resume = lis3lv02d_resume, + } +}; + +static int __init lis3lv02d_init_module(void) +{ + int ret; + + if (acpi_disabled) + return -ENODEV; + + ret = acpi_bus_register_driver(&lis3lv02d_driver); + if (ret < 0) + return ret; + + printk(KERN_INFO DRIVER_NAME " driver loaded.\n"); + + return 0; +} + +static void __exit lis3lv02d_exit_module(void) +{ + acpi_bus_unregister_driver(&lis3lv02d_driver); +} + +MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver"); +MODULE_AUTHOR("Yan Burman and Eric Piel"); +MODULE_LICENSE("GPL"); + +module_init(lis3lv02d_init_module); +module_exit(lis3lv02d_exit_module); diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h new file mode 100644 index 000000000000..330cfc60e948 --- /dev/null +++ b/drivers/hwmon/lis3lv02d.h @@ -0,0 +1,149 @@ +/* + * lis3lv02d.h - ST LIS3LV02DL accelerometer driver + * + * Copyright (C) 2007-2008 Yan Burman + * Copyright (C) 2008 Eric Piel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to + * be connected via SPI. There exists also several similar chips (such as LIS302DL or + * LIS3L02DQ) but not in the HP laptops and they have slightly different registers. + * They can also be connected via I²C. + */ + +#define LIS3LV02DL_ID 0x3A /* Also the LIS3LV02DQ */ +#define LIS302DL_ID 0x3B /* Also the LIS202DL! */ + +enum lis3lv02d_reg { + WHO_AM_I = 0x0F, + OFFSET_X = 0x16, + OFFSET_Y = 0x17, + OFFSET_Z = 0x18, + GAIN_X = 0x19, + GAIN_Y = 0x1A, + GAIN_Z = 0x1B, + CTRL_REG1 = 0x20, + CTRL_REG2 = 0x21, + CTRL_REG3 = 0x22, + HP_FILTER_RESET = 0x23, + STATUS_REG = 0x27, + OUTX_L = 0x28, + OUTX_H = 0x29, + OUTY_L = 0x2A, + OUTY_H = 0x2B, + OUTZ_L = 0x2C, + OUTZ_H = 0x2D, + FF_WU_CFG = 0x30, + FF_WU_SRC = 0x31, + FF_WU_ACK = 0x32, + FF_WU_THS_L = 0x34, + FF_WU_THS_H = 0x35, + FF_WU_DURATION = 0x36, + DD_CFG = 0x38, + DD_SRC = 0x39, + DD_ACK = 0x3A, + DD_THSI_L = 0x3C, + DD_THSI_H = 0x3D, + DD_THSE_L = 0x3E, + DD_THSE_H = 0x3F, +}; + +enum lis3lv02d_ctrl1 { + CTRL1_Xen = 0x01, + CTRL1_Yen = 0x02, + CTRL1_Zen = 0x04, + CTRL1_ST = 0x08, + CTRL1_DF0 = 0x10, + CTRL1_DF1 = 0x20, + CTRL1_PD0 = 0x40, + CTRL1_PD1 = 0x80, +}; +enum lis3lv02d_ctrl2 { + CTRL2_DAS = 0x01, + CTRL2_SIM = 0x02, + CTRL2_DRDY = 0x04, + CTRL2_IEN = 0x08, + CTRL2_BOOT = 0x10, + CTRL2_BLE = 0x20, + CTRL2_BDU = 0x40, /* Block Data Update */ + CTRL2_FS = 0x80, /* Full Scale selection */ +}; + + +enum lis3lv02d_ctrl3 { + CTRL3_CFS0 = 0x01, + CTRL3_CFS1 = 0x02, + CTRL3_FDS = 0x10, + CTRL3_HPFF = 0x20, + CTRL3_HPDD = 0x40, + CTRL3_ECK = 0x80, +}; + +enum lis3lv02d_status_reg { + STATUS_XDA = 0x01, + STATUS_YDA = 0x02, + STATUS_ZDA = 0x04, + STATUS_XYZDA = 0x08, + STATUS_XOR = 0x10, + STATUS_YOR = 0x20, + STATUS_ZOR = 0x40, + STATUS_XYZOR = 0x80, +}; + +enum lis3lv02d_ff_wu_cfg { + FF_WU_CFG_XLIE = 0x01, + FF_WU_CFG_XHIE = 0x02, + FF_WU_CFG_YLIE = 0x04, + FF_WU_CFG_YHIE = 0x08, + FF_WU_CFG_ZLIE = 0x10, + FF_WU_CFG_ZHIE = 0x20, + FF_WU_CFG_LIR = 0x40, + FF_WU_CFG_AOI = 0x80, +}; + +enum lis3lv02d_ff_wu_src { + FF_WU_SRC_XL = 0x01, + FF_WU_SRC_XH = 0x02, + FF_WU_SRC_YL = 0x04, + FF_WU_SRC_YH = 0x08, + FF_WU_SRC_ZL = 0x10, + FF_WU_SRC_ZH = 0x20, + FF_WU_SRC_IA = 0x40, +}; + +enum lis3lv02d_dd_cfg { + DD_CFG_XLIE = 0x01, + DD_CFG_XHIE = 0x02, + DD_CFG_YLIE = 0x04, + DD_CFG_YHIE = 0x08, + DD_CFG_ZLIE = 0x10, + DD_CFG_ZHIE = 0x20, + DD_CFG_LIR = 0x40, + DD_CFG_IEND = 0x80, +}; + +enum lis3lv02d_dd_src { + DD_SRC_XL = 0x01, + DD_SRC_XH = 0x02, + DD_SRC_YL = 0x04, + DD_SRC_YH = 0x08, + DD_SRC_ZL = 0x10, + DD_SRC_ZH = 0x20, + DD_SRC_IA = 0x40, +}; + diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 3ff0285396fa..cfc1ee90f5a3 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -39,7 +39,8 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; /* Insmod parameters */ -I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); +I2C_CLIENT_INSMOD_7(lm85b, lm85c, adm1027, adt7463, adt7468, emc6d100, + emc6d102); /* The LM85 registers */ @@ -59,6 +60,12 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_REG_COMPANY 0x3e #define LM85_REG_VERSTEP 0x3f + +#define ADT7468_REG_CFG5 0x7c +#define ADT7468_OFF64 0x01 +#define IS_ADT7468_OFF64(data) \ + ((data)->type == adt7468 && !((data)->cfg5 & ADT7468_OFF64)) + /* These are the recognized values for the above regs */ #define LM85_COMPANY_NATIONAL 0x01 #define LM85_COMPANY_ANALOG_DEV 0x41 @@ -70,6 +77,8 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_VERSTEP_ADM1027 0x60 #define LM85_VERSTEP_ADT7463 0x62 #define LM85_VERSTEP_ADT7463C 0x6A +#define LM85_VERSTEP_ADT7468_1 0x71 +#define LM85_VERSTEP_ADT7468_2 0x72 #define LM85_VERSTEP_EMC6D100_A0 0x60 #define LM85_VERSTEP_EMC6D100_A1 0x61 #define LM85_VERSTEP_EMC6D102 0x65 @@ -306,6 +315,7 @@ struct lm85_data { u8 vid; /* Register value */ u8 vrm; /* VRM version */ u32 alarms; /* Register encoding, combined */ + u8 cfg5; /* Config Register 5 on ADT7468 */ struct lm85_autofan autofan[3]; struct lm85_zone zone[3]; }; @@ -685,6 +695,9 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); + if (IS_ADT7468_OFF64(data)) + val += 64; + mutex_lock(&data->update_lock); data->temp_min[nr] = TEMP_TO_REG(val); lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]); @@ -708,6 +721,9 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); + if (IS_ADT7468_OFF64(data)) + val += 64; + mutex_lock(&data->update_lock); data->temp_max[nr] = TEMP_TO_REG(val); lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]); @@ -1163,6 +1179,10 @@ static int lm85_detect(struct i2c_client *client, int kind, case LM85_VERSTEP_ADT7463C: kind = adt7463; break; + case LM85_VERSTEP_ADT7468_1: + case LM85_VERSTEP_ADT7468_2: + kind = adt7468; + break; } } else if (company == LM85_COMPANY_SMSC) { switch (verstep) { @@ -1195,6 +1215,9 @@ static int lm85_detect(struct i2c_client *client, int kind, case adt7463: type_name = "adt7463"; break; + case adt7468: + type_name = "adt7468"; + break; case emc6d100: type_name = "emc6d100"; break; @@ -1246,10 +1269,11 @@ static int lm85_probe(struct i2c_client *client, if (err) goto err_kfree; - /* The ADT7463 has an optional VRM 10 mode where pin 21 is used + /* The ADT7463/68 have an optional VRM 10 mode where pin 21 is used as a sixth digital VID input rather than an analog input. */ data->vid = lm85_read_value(client, LM85_REG_VID); - if (!(data->type == adt7463 && (data->vid & 0x80))) + if (!((data->type == adt7463 || data->type == adt7468) && + (data->vid & 0x80))) if ((err = sysfs_create_group(&client->dev.kobj, &lm85_group_in4))) goto err_remove_files; @@ -1357,7 +1381,8 @@ static struct lm85_data *lm85_update_device(struct device *dev) * There are 2 additional resolution bits per channel and we * have room for 4, so we shift them to the left. */ - if (data->type == adm1027 || data->type == adt7463) { + if (data->type == adm1027 || data->type == adt7463 || + data->type == adt7468) { int ext1 = lm85_read_value(client, ADM1027_REG_EXTEND_ADC1); int ext2 = lm85_read_value(client, @@ -1382,16 +1407,23 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_FAN(i)); } - if (!(data->type == adt7463 && (data->vid & 0x80))) { + if (!((data->type == adt7463 || data->type == adt7468) && + (data->vid & 0x80))) { data->in[4] = lm85_read_value(client, LM85_REG_IN(4)); } + if (data->type == adt7468) + data->cfg5 = lm85_read_value(client, ADT7468_REG_CFG5); + for (i = 0; i <= 2; ++i) { data->temp[i] = lm85_read_value(client, LM85_REG_TEMP(i)); data->pwm[i] = lm85_read_value(client, LM85_REG_PWM(i)); + + if (IS_ADT7468_OFF64(data)) + data->temp[i] -= 64; } data->alarms = lm85_read_value(client, LM85_REG_ALARM1); @@ -1446,7 +1478,8 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_FAN_MIN(i)); } - if (!(data->type == adt7463 && (data->vid & 0x80))) { + if (!((data->type == adt7463 || data->type == adt7468) && + (data->vid & 0x80))) { data->in_min[4] = lm85_read_value(client, LM85_REG_IN_MIN(4)); data->in_max[4] = lm85_read_value(client, @@ -1481,6 +1514,13 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_AFAN_LIMIT(i)); data->zone[i].critical = lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i)); + + if (IS_ADT7468_OFF64(data)) { + data->temp_min[i] -= 64; + data->temp_max[i] -= 64; + data->zone[i].limit -= 64; + data->zone[i].critical -= 64; + } } i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1); diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 228f75723063..3fcf78e906db 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -365,6 +365,7 @@ static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) pmsg = &msgs[tptr]; if (pmsg->flags & I2C_M_RD) ret = wait_event_interruptible_timeout(cpm->i2c_wait, + (in_be16(&tbdf[tptr].cbd_sc) & BD_SC_NAK) || !(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY), 1 * HZ); else diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c index f4d22ae9d294..e5a8dae4a289 100644 --- a/drivers/i2c/busses/i2c-highlander.c +++ b/drivers/i2c/busses/i2c-highlander.c @@ -92,7 +92,7 @@ static void highlander_i2c_setup(struct highlander_i2c_dev *dev) static void smbus_write_data(u8 *src, u16 *dst, int len) { for (; len > 1; len -= 2) { - *dst++ = be16_to_cpup((u16 *)src); + *dst++ = be16_to_cpup((__be16 *)src); src += 2; } @@ -103,7 +103,7 @@ static void smbus_write_data(u8 *src, u16 *dst, int len) static void smbus_read_data(u16 *src, u8 *dst, int len) { for (; len > 1; len -= 2) { - *(u16 *)dst = cpu_to_be16p(src++); + *(__be16 *)dst = cpu_to_be16p(src++); dst += 2; } diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index 59ba2086d2f9..a257cd5cd134 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -189,8 +189,6 @@ static void i2c_parport_attach (struct parport *port) if (adapter_parm[type].init.val) line_set(port, 1, &adapter_parm[type].init); - parport_release(adapter->pdev); - if (i2c_bit_add_bus(&adapter->adapter) < 0) { printk(KERN_ERR "i2c-parport: Unable to register with I2C\n"); goto ERROR1; @@ -202,6 +200,7 @@ static void i2c_parport_attach (struct parport *port) return; ERROR1: + parport_release(adapter->pdev); parport_unregister_device(adapter->pdev); ERROR0: kfree(adapter); @@ -221,6 +220,7 @@ static void i2c_parport_detach (struct parport *port) if (adapter_parm[type].init.val) line_set(port, 0, &adapter_parm[type].init); + parport_release(adapter->pdev); parport_unregister_device(adapter->pdev); if (prev) prev->next = adapter->next; diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c index dcf2045b5222..0bdb2d7f0570 100644 --- a/drivers/i2c/busses/i2c-pmcmsp.c +++ b/drivers/i2c/busses/i2c-pmcmsp.c @@ -486,7 +486,7 @@ static enum pmcmsptwi_xfer_result pmcmsptwi_xfer_cmd( if (cmd->type == MSP_TWI_CMD_WRITE || cmd->type == MSP_TWI_CMD_WRITE_READ) { - __be64 tmp = cpu_to_be64p((u64 *)cmd->write_data); + u64 tmp = be64_to_cpup((__be64 *)cmd->write_data); tmp >>= (MSP_MAX_BYTES_PER_RW - cmd->write_len) * 8; dev_dbg(&pmcmsptwi_adapter.dev, "Writing 0x%016llx\n", tmp); pmcmsptwi_writel(tmp & 0x00000000ffffffffLL, diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 1fac4e233133..b7434d24904e 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -56,6 +56,7 @@ enum s3c24xx_i2c_state { struct s3c24xx_i2c { spinlock_t lock; wait_queue_head_t wait; + unsigned int suspended:1; struct i2c_msg *msg; unsigned int msg_num; @@ -507,7 +508,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int unsigned long timeout; int ret; - if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN)) + if (i2c->suspended) return -EIO; ret = s3c24xx_i2c_set_master(i2c); @@ -986,17 +987,26 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev) } #ifdef CONFIG_PM +static int s3c24xx_i2c_suspend_late(struct platform_device *dev, + pm_message_t msg) +{ + struct s3c24xx_i2c *i2c = platform_get_drvdata(dev); + i2c->suspended = 1; + return 0; +} + static int s3c24xx_i2c_resume(struct platform_device *dev) { struct s3c24xx_i2c *i2c = platform_get_drvdata(dev); - if (i2c != NULL) - s3c24xx_i2c_init(i2c); + i2c->suspended = 0; + s3c24xx_i2c_init(i2c); return 0; } #else +#define s3c24xx_i2c_suspend_late NULL #define s3c24xx_i2c_resume NULL #endif @@ -1005,6 +1015,7 @@ static int s3c24xx_i2c_resume(struct platform_device *dev) static struct platform_driver s3c2410_i2c_driver = { .probe = s3c24xx_i2c_probe, .remove = s3c24xx_i2c_remove, + .suspend_late = s3c24xx_i2c_suspend_late, .resume = s3c24xx_i2c_resume, .driver = { .owner = THIS_MODULE, @@ -1015,6 +1026,7 @@ static struct platform_driver s3c2410_i2c_driver = { static struct platform_driver s3c2440_i2c_driver = { .probe = s3c24xx_i2c_probe, .remove = s3c24xx_i2c_remove, + .suspend_late = s3c24xx_i2c_suspend_late, .resume = s3c24xx_i2c_resume, .driver = { .owner = THIS_MODULE, diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 640cbb237328..3384a717fec0 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -318,7 +318,8 @@ static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd) } else data = i2c_op(pd, OP_RX, 0); - pd->msg->buf[real_pos] = data; + if (real_pos >= 0) + pd->msg->buf[real_pos] = data; } while (0); pd->pos++; diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c index 28902ebd5539..e0d56ef2bcb0 100644 --- a/drivers/i2c/chips/isp1301_omap.c +++ b/drivers/i2c/chips/isp1301_omap.c @@ -25,6 +25,7 @@ #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/gpio.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <linux/usb.h> @@ -33,7 +34,10 @@ #include <linux/workqueue.h> #include <asm/irq.h> +#include <asm/mach-types.h> + #include <mach/usb.h> +#include <mach/mux.h> #ifndef DEBUG @@ -88,14 +92,9 @@ struct isp1301 { /*-------------------------------------------------------------------------*/ -#ifdef CONFIG_MACH_OMAP_H2 - /* board-specific PM hooks */ -#include <asm/gpio.h> -#include <mach/mux.h> -#include <asm/mach-types.h> - +#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3) #if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE) @@ -135,6 +134,33 @@ static inline void notresponding(struct isp1301 *isp) #endif +#if defined(CONFIG_MACH_OMAP_H4) + +static void enable_vbus_draw(struct isp1301 *isp, unsigned mA) +{ + /* H4 controls this by DIP switch S2.4; no soft control. + * ON means the charger is always enabled. Leave it OFF + * unless the OTG port is used only in B-peripheral mode. + */ +} + +static void enable_vbus_source(struct isp1301 *isp) +{ + /* this board won't supply more than 8mA vbus power. + * some boards can switch a 100ma "unit load" (or more). + */ +} + + +/* products will deliver OTG messages with LEDs, GUI, etc */ +static inline void notresponding(struct isp1301 *isp) +{ + printk(KERN_NOTICE "OTG device not responding.\n"); +} + + +#endif + /*-------------------------------------------------------------------------*/ static struct i2c_driver isp1301_driver; @@ -334,8 +360,7 @@ static int gadget_suspend(struct isp1301 *isp) * NOTE: guaranteeing certain response times might mean we shouldn't * share keventd's work queue; a realtime task might be safest. */ -void -isp1301_defer_work(struct isp1301 *isp, int work) +static void isp1301_defer_work(struct isp1301 *isp, int work) { int status; @@ -512,7 +537,6 @@ static void update_otg1(struct isp1301 *isp, u8 int_src) otg_ctrl &= ~OTG_XCEIV_INPUTS; otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD); - if (int_src & INTR_SESS_VLD) otg_ctrl |= OTG_ASESSVLD; else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) { @@ -886,11 +910,11 @@ static int otg_probe(struct platform_device *dev) static int otg_remove(struct platform_device *dev) { - otg_dev = 0; + otg_dev = NULL; return 0; } -struct platform_driver omap_otg_driver = { +static struct platform_driver omap_otg_driver = { .probe = otg_probe, .remove = otg_remove, .driver = { @@ -1212,6 +1236,8 @@ static void isp1301_release(struct device *dev) isp = dev_get_drvdata(dev); + /* FIXME -- not with a "new style" driver, it doesn't!! */ + /* ugly -- i2c hijacks our memory hook to wait_for_completion() */ if (isp->i2c_release) isp->i2c_release(dev); @@ -1233,7 +1259,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c) otg_unbind(isp); #endif if (machine_is_omap_h2()) - omap_free_gpio(2); + gpio_free(2); isp->timer.data = 0; set_bit(WORK_STOP, &isp->todo); @@ -1241,7 +1267,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c) flush_scheduled_work(); put_device(&i2c->dev); - the_transceiver = 0; + the_transceiver = NULL; return 0; } @@ -1295,7 +1321,7 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host) if (!host) { omap_writew(0, OTG_IRQ_EN); power_down(isp); - isp->otg.host = 0; + isp->otg.host = NULL; return 0; } @@ -1344,7 +1370,9 @@ static int isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) { struct isp1301 *isp = container_of(otg, struct isp1301, otg); +#ifndef CONFIG_USB_OTG u32 l; +#endif if (!otg || isp != the_transceiver) return -ENODEV; @@ -1354,7 +1382,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) if (!isp->otg.default_a) enable_vbus_draw(isp, 0); usb_gadget_vbus_disconnect(isp->otg.gadget); - isp->otg.gadget = 0; + isp->otg.gadget = NULL; power_down(isp); return 0; } @@ -1379,7 +1407,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) power_up(isp); isp->otg.state = OTG_STATE_B_IDLE; - if (machine_is_omap_h2()) + if (machine_is_omap_h2() || machine_is_omap_h3()) isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, @@ -1499,7 +1527,8 @@ isp1301_start_hnp(struct otg_transceiver *dev) /*-------------------------------------------------------------------------*/ -static int __init isp1301_probe(struct i2c_client *i2c) +static int __init +isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { int status; struct isp1301 *isp; @@ -1647,7 +1676,7 @@ module_init(isp_init); static void __exit isp_exit(void) { if (the_transceiver) - otg_set_transceiver(0); + otg_set_transceiver(NULL); i2c_del_driver(&isp1301_driver); } module_exit(isp_exit); diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 5a485c22660a..c6a63f46bc15 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -631,7 +631,7 @@ int i2c_del_adapter(struct i2c_adapter *adap) /* detach any active clients. This must be done first, because * it can fail; in which case we give up. */ - list_for_each_entry_safe(client, _n, &adap->clients, list) { + list_for_each_entry_safe_reverse(client, _n, &adap->clients, list) { struct i2c_driver *driver; driver = client->driver; diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 6d7401772a8f..e6857e01d1ba 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -669,10 +669,12 @@ config BLK_DEV_CELLEB endif +# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF config BLK_DEV_IDE_PMAC tristate "PowerMac on-board IDE support" depends on PPC_PMAC && IDE=y select IDE_TIMINGS + select BLK_DEV_IDEDMA_PCI help This driver provides support for the on-board IDE controller on most of the recent Apple Power Macintoshes and PowerBooks. @@ -689,16 +691,6 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST CD-ROM on hda. This option changes this to more natural hda for hard disk and hdc for CD-ROM. -config BLK_DEV_IDEDMA_PMAC - bool "PowerMac IDE DMA support" - depends on BLK_DEV_IDE_PMAC - select BLK_DEV_IDEDMA_PCI - help - This option allows the driver for the on-board IDE controller on - Power Macintoshes and PowerBooks to use DMA (direct memory access) - to transfer data to and from memory. Saying Y is safe and improves - performance. - config BLK_DEV_IDE_AU1XXX bool "IDE for AMD Alchemy Au1200" depends on SOC_AU1200 @@ -912,7 +904,7 @@ config BLK_DEV_UMC8672 endif config BLK_DEV_IDEDMA - def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \ + def_bool BLK_DEV_IDEDMA_SFF || \ BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA endif # IDE diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c index e56c7b72f9e2..45d2356bb725 100644 --- a/drivers/ide/alim15x3.c +++ b/drivers/ide/alim15x3.c @@ -591,7 +591,7 @@ static int __init ali15x3_ide_init(void) static void __exit ali15x3_ide_exit(void) { - return pci_unregister_driver(&alim15x3_pci_driver); + pci_unregister_driver(&alim15x3_pci_driver); } module_init(ali15x3_ide_init); diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c index 81ec73134eda..c6bcd3014a29 100644 --- a/drivers/ide/amd74xx.c +++ b/drivers/ide/amd74xx.c @@ -3,7 +3,7 @@ * IDE driver for Linux. * * Copyright (c) 2000-2002 Vojtech Pavlik - * Copyright (c) 2007 Bartlomiej Zolnierkiewicz + * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz * * Based on the work of: * Andre Hedrick @@ -263,6 +263,15 @@ static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_ d.udma_mask = ATA_UDMA5; } + /* + * It seems that on some nVidia controllers using AltStatus + * register can be unreliable so default to Status register + * if the device is in Compatibility Mode. + */ + if (dev->vendor == PCI_VENDOR_ID_NVIDIA && + ide_pci_is_in_compatibility_mode(dev)) + d.host_flags |= IDE_HFLAG_BROKEN_ALTSTATUS; + printk(KERN_INFO "%s %s: UDMA%s controller\n", d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]); diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index 2d848010499d..81f70caeb40f 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c @@ -419,7 +419,7 @@ static void icside_setup_ports(hw_regs_t *hw, void __iomem *base, hw->chipset = ide_acorn; } -static int __init +static int __devinit icside_register_v5(struct icside_state *state, struct expansion_card *ec) { void __iomem *base; @@ -473,7 +473,7 @@ static const struct ide_port_info icside_v6_port_info __initdata = { .swdma_mask = ATA_SWDMA2, }; -static int __init +static int __devinit icside_register_v6(struct icside_state *state, struct expansion_card *ec) { void __iomem *ioc_base, *easi_base; diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index cb199c815b53..f50210fe558f 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -444,6 +444,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e), PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6), + PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506), PCMCIA_DEVICE_NULL, }; MODULE_DEVICE_TABLE(pcmcia, ide_ids); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 7162d67562af..cc35d6dbd410 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -132,10 +132,14 @@ int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors) } EXPORT_SYMBOL(ide_end_request); -static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error) +static void ide_complete_power_step(ide_drive_t *drive, struct request *rq) { struct request_pm_state *pm = rq->data; +#ifdef DEBUG_PM + printk(KERN_INFO "%s: complete_power_step(step: %d)\n", + drive->name, pm->pm_step); +#endif if (drive->media != ide_disk) return; @@ -172,7 +176,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * /* Not supported? Switch to next step now. */ if (ata_id_flush_enabled(drive->id) == 0 || (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) { - ide_complete_power_step(drive, rq, 0, 0); + ide_complete_power_step(drive, rq); return ide_stopped; } if (ata_id_flush_ext_enabled(drive->id)) @@ -191,7 +195,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * if (drive->media != ide_disk) pm->pm_step = IDE_PM_RESTORE_DMA; else - ide_complete_power_step(drive, rq, 0, 0); + ide_complete_power_step(drive, rq); return ide_stopped; case IDE_PM_IDLE: /* Resume step 2 (idle) */ args->tf.command = ATA_CMD_IDLEIMMEDIATE; @@ -322,11 +326,8 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) } } else if (blk_pm_request(rq)) { struct request_pm_state *pm = rq->data; -#ifdef DEBUG_PM - printk("%s: complete_power_step(step: %d, stat: %x, err: %x)\n", - drive->name, rq->pm->pm_step, stat, err); -#endif - ide_complete_power_step(drive, rq, stat, err); + + ide_complete_power_step(drive, rq); if (pm->pm_step == IDE_PM_COMPLETED) ide_complete_pm_request(drive, rq); return; @@ -804,7 +805,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) struct request_pm_state *pm = rq->data; #ifdef DEBUG_PM printk("%s: start_power_step(step: %d)\n", - drive->name, rq->pm->pm_step); + drive->name, pm->pm_step); #endif startstop = ide_start_power_step(drive, rq); if (startstop == ide_stopped && @@ -967,14 +968,13 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) ide_startstop_t startstop; int loops = 0; - /* for atari only: POSSIBLY BROKEN HERE(?) */ - ide_get_lock(ide_intr, hwgroup); - /* caller must own ide_lock */ BUG_ON(!irqs_disabled()); while (!hwgroup->busy) { hwgroup->busy = 1; + /* for atari only */ + ide_get_lock(ide_intr, hwgroup); drive = choose_drive(hwgroup); if (drive == NULL) { int sleeping = 0; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 5d6ba14e211d..c41c3b9b6f02 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -457,18 +457,14 @@ int drive_is_ready (ide_drive_t *drive) if (drive->waiting_for_dma) return hwif->dma_ops->dma_test_irq(drive); -#if 0 - /* need to guarantee 400ns since last command was issued */ - udelay(1); -#endif - /* * We do a passive status test under shared PCI interrupts on * cards that truly share the ATA side interrupt, but may also share * an interrupt with another pci card/device. We make no assumptions * about possible isa-pnp and pci-pnp issues yet. */ - if (hwif->io_ports.ctl_addr) + if (hwif->io_ports.ctl_addr && + (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) stat = hwif->tp_ops->read_altstatus(hwif); else /* Note: this may clear a pending IRQ!! */ @@ -610,6 +606,7 @@ static const struct drive_list_entry ivb_list[] = { { "TSSTcorp CDDVDW SH-S202N" , "SB01" }, { "TSSTcorp CDDVDW SH-S202H" , "SB00" }, { "TSSTcorp CDDVDW SH-S202H" , "SB01" }, + { "SAMSUNG SP0822N" , "WA100-10" }, { NULL , NULL } }; diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 1649ea54f76c..c55bdbd22314 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -266,7 +266,8 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) /* take a deep breath */ msleep(50); - if (io_ports->ctl_addr) { + if (io_ports->ctl_addr && + (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) { a = tp_ops->read_altstatus(hwif); s = tp_ops->read_status(hwif); if ((a ^ s) & ~ATA_IDX) diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c index 2e19d6298536..7c481bb56fab 100644 --- a/drivers/ide/pmac.c +++ b/drivers/ide/pmac.c @@ -66,7 +66,6 @@ typedef struct pmac_ide_hwif { struct macio_dev *mdev; u32 timings[4]; volatile u32 __iomem * *kauai_fcr; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC /* Those fields are duplicating what is in hwif. We currently * can't use the hwif ones because of some assumptions that are * beeing done by the generic code about the kind of dma controller @@ -74,8 +73,6 @@ typedef struct pmac_ide_hwif { */ volatile struct dbdma_regs __iomem * dma_regs; struct dbdma_cmd* dma_table_cpu; -#endif - } pmac_ide_hwif_t; enum { @@ -222,8 +219,6 @@ static const char* model_name[] = { #define KAUAI_FCR_UATA_RESET_N 0x00000002 #define KAUAI_FCR_UATA_ENABLE 0x00000001 -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - /* Rounded Multiword DMA timings * * I gave up finding a generic formula for all controller @@ -413,8 +408,6 @@ static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq); static void pmac_ide_selectproc(ide_drive_t *drive); static void pmac_ide_kauai_selectproc(ide_drive_t *drive); -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ - #define PMAC_IDE_REG(x) \ ((void __iomem *)((drive)->hwif->io_ports.data_addr + (x))) @@ -584,8 +577,6 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) pmac_ide_do_update_timings(drive); } -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - /* * Calculate KeyLargo ATA/66 UDMA timings */ @@ -786,7 +777,6 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2, drive->name, speed & 0xf, *timings); #endif } -#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) { @@ -804,7 +794,6 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) tl[0] = *timings; tl[1] = *timings2; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC if (speed >= XFER_UDMA_0) { if (pmif->kind == controller_kl_ata4) ret = set_timings_udma_ata4(&tl[0], speed); @@ -817,7 +806,7 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) ret = -1; } else set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed); -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ + if (ret) return; @@ -1008,9 +997,7 @@ static const struct ide_port_info pmac_port_info = { .chipset = ide_pmac, .tp_ops = &pmac_tp_ops, .port_ops = &pmac_ide_port_ops, -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC .dma_ops = &pmac_dma_ops, -#endif .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | IDE_HFLAG_POST_SET_MODE | IDE_HFLAG_MMIO | @@ -1182,7 +1169,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) pmif->regbase = regbase; pmif->irq = irq; pmif->kauai_fcr = NULL; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC + if (macio_resource_count(mdev) >= 2) { if (macio_request_resource(mdev, 1, "ide-pmac (dma)")) printk(KERN_WARNING "ide-pmac: can't request DMA " @@ -1192,7 +1179,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000); } else pmif->dma_regs = NULL; -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ + dev_set_drvdata(&mdev->ofdev.dev, pmif); memset(&hw, 0, sizeof(hw)); @@ -1300,9 +1287,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) base = ioremap(rbase, rlen); pmif->regbase = (unsigned long) base + 0x2000; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC pmif->dma_regs = base + 0x1000; -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ pmif->kauai_fcr = base; pmif->irq = pdev->irq; @@ -1434,8 +1419,6 @@ out: return error; } -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - /* * pmac_ide_build_dmatable builds the DBDMA command list * for a transfer and sets the DBDMA channel to point to it. @@ -1723,13 +1706,6 @@ static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, return 0; } -#else -static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, - const struct ide_port_info *d) -{ - return -EOPNOTSUPP; -} -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ module_init(pmac_ide_probe); diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c index 7defa0ae2014..a687a7dfea6f 100644 --- a/drivers/ide/sgiioc4.c +++ b/drivers/ide/sgiioc4.c @@ -550,7 +550,7 @@ static const struct ide_dma_ops sgiioc4_dma_ops = { .dma_timeout = ide_dma_timeout, }; -static const struct ide_port_info sgiioc4_port_info __devinitdata = { +static const struct ide_port_info sgiioc4_port_info __devinitconst = { .name = DRV_NAME, .chipset = ide_pci, .init_dma = ide_dma_sgiioc4, @@ -633,7 +633,7 @@ out: return ret; } -int +int __devinit ioc4_ide_attach_one(struct ioc4_driver_data *idd) { /* PCI-RT does not bring out IDE connection. @@ -645,7 +645,7 @@ ioc4_ide_attach_one(struct ioc4_driver_data *idd) return pci_init_sgiioc4(idd->idd_pdev); } -static struct ioc4_submodule ioc4_ide_submodule = { +static struct ioc4_submodule __devinitdata ioc4_ide_submodule = { .is_name = "IOC4_ide", .is_owner = THIS_MODULE, .is_probe = ioc4_ide_attach_one, diff --git a/drivers/idle/Kconfig b/drivers/idle/Kconfig index 108264de0ac9..f15e90a453d1 100644 --- a/drivers/idle/Kconfig +++ b/drivers/idle/Kconfig @@ -1,5 +1,6 @@ menu "Memory power savings" +depends on X86_64 config I7300_IDLE_IOAT_CHANNEL bool @@ -7,7 +8,7 @@ config I7300_IDLE_IOAT_CHANNEL config I7300_IDLE tristate "Intel chipset idle memory power saving driver" select I7300_IDLE_IOAT_CHANNEL - depends on X86_64 && EXPERIMENTAL + depends on EXPERIMENTAL help Enable memory power savings when idle with certain Intel server chipsets. The chipset must have I/O AT support, such as the diff --git a/drivers/ieee1394/highlevel.c b/drivers/ieee1394/highlevel.c index 918ffc4fc8ac..272543a42a43 100644 --- a/drivers/ieee1394/highlevel.c +++ b/drivers/ieee1394/highlevel.c @@ -46,10 +46,6 @@ static DEFINE_RWLOCK(hl_irqs_lock); static DEFINE_RWLOCK(addr_space_lock); -/* addr_space list will have zero and max already included as bounds */ -static struct hpsb_address_ops dummy_ops = { NULL, NULL, NULL, NULL }; -static struct hpsb_address_serve dummy_zero_addr, dummy_max_addr; - static struct hl_host_info *hl_get_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host) @@ -481,20 +477,23 @@ int hpsb_unregister_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host, return retval; } +static struct hpsb_address_ops dummy_ops; + +/* dummy address spaces as lower and upper bounds of the host's a.s. list */ static void init_hpsb_highlevel(struct hpsb_host *host) { - INIT_LIST_HEAD(&dummy_zero_addr.host_list); - INIT_LIST_HEAD(&dummy_zero_addr.hl_list); - INIT_LIST_HEAD(&dummy_max_addr.host_list); - INIT_LIST_HEAD(&dummy_max_addr.hl_list); + INIT_LIST_HEAD(&host->dummy_zero_addr.host_list); + INIT_LIST_HEAD(&host->dummy_zero_addr.hl_list); + INIT_LIST_HEAD(&host->dummy_max_addr.host_list); + INIT_LIST_HEAD(&host->dummy_max_addr.hl_list); - dummy_zero_addr.op = dummy_max_addr.op = &dummy_ops; + host->dummy_zero_addr.op = host->dummy_max_addr.op = &dummy_ops; - dummy_zero_addr.start = dummy_zero_addr.end = 0; - dummy_max_addr.start = dummy_max_addr.end = ((u64) 1) << 48; + host->dummy_zero_addr.start = host->dummy_zero_addr.end = 0; + host->dummy_max_addr.start = host->dummy_max_addr.end = ((u64) 1) << 48; - list_add_tail(&dummy_zero_addr.host_list, &host->addr_space); - list_add_tail(&dummy_max_addr.host_list, &host->addr_space); + list_add_tail(&host->dummy_zero_addr.host_list, &host->addr_space); + list_add_tail(&host->dummy_max_addr.host_list, &host->addr_space); } void highlevel_add_host(struct hpsb_host *host) diff --git a/drivers/ieee1394/hosts.h b/drivers/ieee1394/hosts.h index e4e8aeb4d778..dd229950acca 100644 --- a/drivers/ieee1394/hosts.h +++ b/drivers/ieee1394/hosts.h @@ -13,6 +13,7 @@ struct module; #include "ieee1394_types.h" #include "csr.h" +#include "highlevel.h" struct hpsb_packet; struct hpsb_iso; @@ -72,6 +73,9 @@ struct hpsb_host { struct { DECLARE_BITMAP(map, 64); } tl_pool[ALL_NODES]; struct csr_control csr; + + struct hpsb_address_serve dummy_zero_addr; + struct hpsb_address_serve dummy_max_addr; }; enum devctl_cmd { diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index 9e39f73282ee..79ef5fd928ae 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -115,8 +115,14 @@ static int nodemgr_bus_read(struct csr1212_csr *csr, u64 addr, u16 length, return error; } +#define OUI_FREECOM_TECHNOLOGIES_GMBH 0x0001db + static int nodemgr_get_max_rom(quadlet_t *bus_info_data, void *__ci) { + /* Freecom FireWire Hard Drive firmware bug */ + if (be32_to_cpu(bus_info_data[3]) >> 8 == OUI_FREECOM_TECHNOLOGIES_GMBH) + return 0; + return (be32_to_cpu(bus_info_data[2]) >> 8) & 0x3; } @@ -1685,6 +1691,7 @@ static int nodemgr_host_thread(void *data) g = get_hpsb_generation(host); for (i = 0; i < 4 ; i++) { msleep_interruptible(63); + try_to_freeze(); if (kthread_should_stop()) goto exit; @@ -1725,6 +1732,7 @@ static int nodemgr_host_thread(void *data) /* Sleep 3 seconds */ for (i = 3000/200; i; i--) { msleep_interruptible(200); + try_to_freeze(); if (kthread_should_stop()) goto exit; diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index c52f6e6e8af2..a373c18cf7b8 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -402,6 +402,11 @@ static const struct { }, /* iPod mini */ { .firmware_revision = 0x0a2700, + .model_id = 0x000022, + .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, + }, + /* iPod mini */ { + .firmware_revision = 0x0a2700, .model_id = 0x000023, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, @@ -890,12 +895,13 @@ static void sbp2_host_reset(struct hpsb_host *host) return; read_lock_irqsave(&sbp2_hi_logical_units_lock, flags); + list_for_each_entry(lu, &hi->logical_units, lu_list) - if (likely(atomic_read(&lu->state) != - SBP2LU_STATE_IN_SHUTDOWN)) { - atomic_set(&lu->state, SBP2LU_STATE_IN_RESET); + if (atomic_cmpxchg(&lu->state, + SBP2LU_STATE_RUNNING, SBP2LU_STATE_IN_RESET) + == SBP2LU_STATE_RUNNING) scsi_block_requests(lu->shost); - } + read_unlock_irqrestore(&sbp2_hi_logical_units_lock, flags); } diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index ecff98043589..160ef482712d 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -1102,9 +1102,7 @@ static u64 fw_vers_string_to_u64(struct iwch_dev *iwch_dev) char *cp, *next; unsigned fw_maj, fw_min, fw_mic; - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); next = info.fw_version + 1; cp = strsep(&next, "."); @@ -1192,9 +1190,7 @@ static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr, ch struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; PDBG("%s dev 0x%p\n", __func__, dev); - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); return sprintf(buf, "%s\n", info.fw_version); } @@ -1207,9 +1203,7 @@ static ssize_t show_hca(struct device *dev, struct device_attribute *attr, struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; PDBG("%s dev 0x%p\n", __func__, dev); - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); return sprintf(buf, "%s\n", info.driver); } diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index 3e4585c2318a..19661b2f0406 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -745,7 +745,6 @@ int iwch_post_zb_read(struct iwch_qp *qhp) wqe->read.rdmaop = T3_READ_REQ; wqe->read.reserved[0] = 0; wqe->read.reserved[1] = 0; - wqe->read.reserved[2] = 0; wqe->read.rem_stag = cpu_to_be32(1); wqe->read.rem_to = cpu_to_be64(1); wqe->read.local_stag = cpu_to_be32(1); diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h index 4df887af66a5..7fc35cf0cddf 100644 --- a/drivers/infiniband/hw/ehca/ehca_classes.h +++ b/drivers/infiniband/hw/ehca/ehca_classes.h @@ -163,7 +163,8 @@ struct ehca_mod_qp_parm { /* struct for tracking if cqes have been reported to the application */ struct ehca_qmap_entry { u16 app_wr_id; - u16 reported; + u8 reported; + u8 cqe_req; }; struct ehca_queue_map { @@ -171,6 +172,7 @@ struct ehca_queue_map { unsigned int entries; unsigned int tail; unsigned int left_to_poll; + unsigned int next_wqe_idx; /* Idx to first wqe to be flushed */ }; struct ehca_qp { diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c index cb55be04442c..757035ea246f 100644 --- a/drivers/infiniband/hw/ehca/ehca_irq.c +++ b/drivers/infiniband/hw/ehca/ehca_irq.c @@ -359,36 +359,48 @@ static void notify_port_conf_change(struct ehca_shca *shca, int port_num) *old_attr = new_attr; } +/* replay modify_qp for sqps -- return 0 if all is well, 1 if AQP1 destroyed */ +static int replay_modify_qp(struct ehca_sport *sport) +{ + int aqp1_destroyed; + unsigned long flags; + + spin_lock_irqsave(&sport->mod_sqp_lock, flags); + + aqp1_destroyed = !sport->ibqp_sqp[IB_QPT_GSI]; + + if (sport->ibqp_sqp[IB_QPT_SMI]) + ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_SMI]); + if (!aqp1_destroyed) + ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_GSI]); + + spin_unlock_irqrestore(&sport->mod_sqp_lock, flags); + + return aqp1_destroyed; +} + static void parse_ec(struct ehca_shca *shca, u64 eqe) { u8 ec = EHCA_BMASK_GET(NEQE_EVENT_CODE, eqe); u8 port = EHCA_BMASK_GET(NEQE_PORT_NUMBER, eqe); u8 spec_event; struct ehca_sport *sport = &shca->sport[port - 1]; - unsigned long flags; switch (ec) { case 0x30: /* port availability change */ if (EHCA_BMASK_GET(NEQE_PORT_AVAILABILITY, eqe)) { - int suppress_event; - /* replay modify_qp for sqps */ - spin_lock_irqsave(&sport->mod_sqp_lock, flags); - suppress_event = !sport->ibqp_sqp[IB_QPT_GSI]; - if (sport->ibqp_sqp[IB_QPT_SMI]) - ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_SMI]); - if (!suppress_event) - ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_GSI]); - spin_unlock_irqrestore(&sport->mod_sqp_lock, flags); - - /* AQP1 was destroyed, ignore this event */ - if (suppress_event) - break; + /* only replay modify_qp calls in autodetect mode; + * if AQP1 was destroyed, the port is already down + * again and we can drop the event. + */ + if (ehca_nr_ports < 0) + if (replay_modify_qp(sport)) + break; sport->port_state = IB_PORT_ACTIVE; dispatch_port_event(shca, port, IB_EVENT_PORT_ACTIVE, "is active"); - ehca_query_sma_attr(shca, port, - &sport->saved_attr); + ehca_query_sma_attr(shca, port, &sport->saved_attr); } else { sport->port_state = IB_PORT_DOWN; dispatch_port_event(shca, port, IB_EVENT_PORT_ERR, diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index bb02a86aa526..bec7e0249358 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -994,8 +994,7 @@ static int ehca_mem_notifier(struct notifier_block *nb, if (printk_timed_ratelimit(&ehca_dmem_warn_time, 30 * 1000)) ehca_gen_err("DMEM operations are not allowed" - "as long as an ehca adapter is" - "attached to the LPAR"); + "in conjunction with eHCA"); return NOTIFY_BAD; } } diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index 4d54b9f64567..cadbf0cdd910 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -435,9 +435,13 @@ static void reset_queue_map(struct ehca_queue_map *qmap) { int i; - qmap->tail = 0; - for (i = 0; i < qmap->entries; i++) + qmap->tail = qmap->entries - 1; + qmap->left_to_poll = 0; + qmap->next_wqe_idx = 0; + for (i = 0; i < qmap->entries; i++) { qmap->map[i].reported = 1; + qmap->map[i].cqe_req = 0; + } } /* @@ -860,6 +864,11 @@ static struct ehca_qp *internal_create_qp( if (qp_type == IB_QPT_GSI) { h_ret = ehca_define_sqp(shca, my_qp, init_attr); if (h_ret != H_SUCCESS) { + kfree(my_qp->mod_qp_parm); + my_qp->mod_qp_parm = NULL; + /* the QP pointer is no longer valid */ + shca->sport[init_attr->port_num - 1].ibqp_sqp[qp_type] = + NULL; ret = ehca2ib_return_code(h_ret); goto create_qp_exit6; } @@ -1116,6 +1125,7 @@ static int calc_left_cqes(u64 wqe_p, struct ipz_queue *ipz_queue, void *wqe_v; u64 q_ofs; u32 wqe_idx; + unsigned int tail_idx; /* convert real to abs address */ wqe_p = wqe_p & (~(1UL << 63)); @@ -1128,12 +1138,17 @@ static int calc_left_cqes(u64 wqe_p, struct ipz_queue *ipz_queue, return -EFAULT; } + tail_idx = (qmap->tail + 1) % qmap->entries; wqe_idx = q_ofs / ipz_queue->qe_size; - if (wqe_idx < qmap->tail) - qmap->left_to_poll = (qmap->entries - qmap->tail) + wqe_idx; - else - qmap->left_to_poll = wqe_idx - qmap->tail; + /* check all processed wqes, whether a cqe is requested or not */ + while (tail_idx != wqe_idx) { + if (qmap->map[tail_idx].cqe_req) + qmap->left_to_poll++; + tail_idx = (tail_idx + 1) % qmap->entries; + } + /* save index in queue, where we have to start flushing */ + qmap->next_wqe_idx = wqe_idx; return 0; } @@ -1180,10 +1195,14 @@ static int check_for_left_cqes(struct ehca_qp *my_qp, struct ehca_shca *shca) } else { spin_lock_irqsave(&my_qp->send_cq->spinlock, flags); my_qp->sq_map.left_to_poll = 0; + my_qp->sq_map.next_wqe_idx = (my_qp->sq_map.tail + 1) % + my_qp->sq_map.entries; spin_unlock_irqrestore(&my_qp->send_cq->spinlock, flags); spin_lock_irqsave(&my_qp->recv_cq->spinlock, flags); my_qp->rq_map.left_to_poll = 0; + my_qp->rq_map.next_wqe_idx = (my_qp->rq_map.tail + 1) % + my_qp->rq_map.entries; spin_unlock_irqrestore(&my_qp->recv_cq->spinlock, flags); } diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index 64928079eafa..00a648f4316c 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -179,6 +179,7 @@ static inline int ehca_write_swqe(struct ehca_qp *qp, qmap_entry->app_wr_id = get_app_wr_id(send_wr->wr_id); qmap_entry->reported = 0; + qmap_entry->cqe_req = 0; switch (send_wr->opcode) { case IB_WR_SEND: @@ -203,8 +204,10 @@ static inline int ehca_write_swqe(struct ehca_qp *qp, if ((send_wr->send_flags & IB_SEND_SIGNALED || qp->init_attr.sq_sig_type == IB_SIGNAL_ALL_WR) - && !hidden) + && !hidden) { wqe_p->wr_flag |= WQE_WRFLAG_REQ_SIGNAL_COM; + qmap_entry->cqe_req = 1; + } if (send_wr->opcode == IB_WR_SEND_WITH_IMM || send_wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM) { @@ -569,6 +572,7 @@ static int internal_post_recv(struct ehca_qp *my_qp, qmap_entry = &my_qp->rq_map.map[rq_map_idx]; qmap_entry->app_wr_id = get_app_wr_id(cur_recv_wr->wr_id); qmap_entry->reported = 0; + qmap_entry->cqe_req = 1; wqe_cnt++; } /* eof for cur_recv_wr */ @@ -706,27 +710,34 @@ repoll: goto repoll; wc->qp = &my_qp->ib_qp; + qmap_tail_idx = get_app_wr_id(cqe->work_request_id); + if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT)) + /* We got a send completion. */ + qmap = &my_qp->sq_map; + else + /* We got a receive completion. */ + qmap = &my_qp->rq_map; + + /* advance the tail pointer */ + qmap->tail = qmap_tail_idx; + if (is_error) { /* * set left_to_poll to 0 because in error state, we will not * get any additional CQEs */ - ehca_add_to_err_list(my_qp, 1); + my_qp->sq_map.next_wqe_idx = (my_qp->sq_map.tail + 1) % + my_qp->sq_map.entries; my_qp->sq_map.left_to_poll = 0; + ehca_add_to_err_list(my_qp, 1); + my_qp->rq_map.next_wqe_idx = (my_qp->rq_map.tail + 1) % + my_qp->rq_map.entries; + my_qp->rq_map.left_to_poll = 0; if (HAS_RQ(my_qp)) ehca_add_to_err_list(my_qp, 0); - my_qp->rq_map.left_to_poll = 0; } - qmap_tail_idx = get_app_wr_id(cqe->work_request_id); - if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT)) - /* We got a send completion. */ - qmap = &my_qp->sq_map; - else - /* We got a receive completion. */ - qmap = &my_qp->rq_map; - qmap_entry = &qmap->map[qmap_tail_idx]; if (qmap_entry->reported) { ehca_warn(cq->device, "Double cqe on qp_num=%#x", @@ -738,10 +749,6 @@ repoll: wc->wr_id = replace_wr_id(cqe->work_request_id, qmap_entry->app_wr_id); qmap_entry->reported = 1; - /* this is a proper completion, we need to advance the tail pointer */ - if (++qmap->tail == qmap->entries) - qmap->tail = 0; - /* if left_to_poll is decremented to 0, add the QP to the error list */ if (qmap->left_to_poll > 0) { qmap->left_to_poll--; @@ -805,13 +812,14 @@ static int generate_flush_cqes(struct ehca_qp *my_qp, struct ib_cq *cq, else qmap = &my_qp->rq_map; - qmap_entry = &qmap->map[qmap->tail]; + qmap_entry = &qmap->map[qmap->next_wqe_idx]; while ((nr < num_entries) && (qmap_entry->reported == 0)) { /* generate flush CQE */ + memset(wc, 0, sizeof(*wc)); - offset = qmap->tail * ipz_queue->qe_size; + offset = qmap->next_wqe_idx * ipz_queue->qe_size; wqe = (struct ehca_wqe *)ipz_qeit_calc(ipz_queue, offset); if (!wqe) { ehca_err(cq->device, "Invalid wqe offset=%#lx on " @@ -850,11 +858,12 @@ static int generate_flush_cqes(struct ehca_qp *my_qp, struct ib_cq *cq, wc->qp = &my_qp->ib_qp; - /* mark as reported and advance tail pointer */ + /* mark as reported and advance next_wqe pointer */ qmap_entry->reported = 1; - if (++qmap->tail == qmap->entries) - qmap->tail = 0; - qmap_entry = &qmap->map[qmap->tail]; + qmap->next_wqe_idx++; + if (qmap->next_wqe_idx == qmap->entries) + qmap->next_wqe_idx = 0; + qmap_entry = &qmap->map[qmap->next_wqe_idx]; wc++; nr++; } diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c index fc0f6d9e6030..2296832f94da 100644 --- a/drivers/infiniband/hw/ipath/ipath_ruc.c +++ b/drivers/infiniband/hw/ipath/ipath_ruc.c @@ -156,7 +156,7 @@ bail: /** * ipath_get_rwqe - copy the next RWQE into the QP's RWQE * @qp: the QP - * @wr_id_only: update wr_id only, not SGEs + * @wr_id_only: update qp->r_wr_id only, not qp->r_sge * * Return 0 if no RWQE is available, otherwise return 1. * @@ -173,8 +173,6 @@ int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only) u32 tail; int ret; - qp->r_sge.sg_list = qp->r_sg_list; - if (qp->ibqp.srq) { srq = to_isrq(qp->ibqp.srq); handler = srq->ibsrq.event_handler; @@ -206,8 +204,10 @@ int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only) wqe = get_rwqe_ptr(rq, tail); if (++tail >= rq->size) tail = 0; - } while (!wr_id_only && !ipath_init_sge(qp, wqe, &qp->r_len, - &qp->r_sge)); + if (wr_id_only) + break; + qp->r_sge.sg_list = qp->r_sg_list; + } while (!ipath_init_sge(qp, wqe, &qp->r_len, &qp->r_sge)); qp->r_wr_id = wqe->wr_id; wq->tail = tail; diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c index d0866a3636e2..18308494a195 100644 --- a/drivers/infiniband/hw/mlx4/cq.c +++ b/drivers/infiniband/hw/mlx4/cq.c @@ -343,6 +343,7 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata) { struct mlx4_ib_dev *dev = to_mdev(ibcq->device); struct mlx4_ib_cq *cq = to_mcq(ibcq); + struct mlx4_mtt mtt; int outst_cqe; int err; @@ -376,10 +377,13 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata) goto out; } + mtt = cq->buf.mtt; + err = mlx4_cq_resize(dev->dev, &cq->mcq, entries, &cq->resize_buf->buf.mtt); if (err) goto err_buf; + mlx4_mtt_cleanup(dev->dev, &mtt); if (ibcq->uobject) { cq->buf = cq->resize_buf->buf; cq->ibcq.cqe = cq->resize_buf->cqe; @@ -406,6 +410,7 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata) goto out; err_buf: + mlx4_mtt_cleanup(dev->dev, &cq->resize_buf->buf.mtt); if (!ibcq->uobject) mlx4_ib_free_cq_buf(dev, &cq->resize_buf->buf, cq->resize_buf->cqe); diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c index 87f5c5a87b98..8e4d26d56a95 100644 --- a/drivers/infiniband/hw/mlx4/mr.c +++ b/drivers/infiniband/hw/mlx4/mr.c @@ -205,6 +205,7 @@ struct ib_mr *mlx4_ib_alloc_fast_reg_mr(struct ib_pd *pd, goto err_mr; mr->ibmr.rkey = mr->ibmr.lkey = mr->mmr.key; + mr->umem = NULL; return &mr->ibmr; diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c index a2b04d62b1a4..aa1dc41f04c8 100644 --- a/drivers/infiniband/hw/nes/nes.c +++ b/drivers/infiniband/hw/nes/nes.c @@ -95,6 +95,10 @@ unsigned int wqm_quanta = 0x10000; module_param(wqm_quanta, int, 0644); MODULE_PARM_DESC(wqm_quanta, "WQM quanta"); +static unsigned int limit_maxrdreqsz; +module_param(limit_maxrdreqsz, bool, 0644); +MODULE_PARM_DESC(limit_maxrdreqsz, "Limit max read request size to 256 Bytes"); + LIST_HEAD(nes_adapter_list); static LIST_HEAD(nes_dev_list); @@ -588,6 +592,18 @@ static int __devinit nes_probe(struct pci_dev *pcidev, const struct pci_device_i nesdev->nesadapter->port_count; } + if ((limit_maxrdreqsz || + ((nesdev->nesadapter->phy_type[0] == NES_PHY_TYPE_GLADIUS) && + (hw_rev == NE020_REV1))) && + (pcie_get_readrq(pcidev) > 256)) { + if (pcie_set_readrq(pcidev, 256)) + printk(KERN_ERR PFX "Unable to set max read request" + " to 256 bytes\n"); + else + nes_debug(NES_DBG_INIT, "Max read request size set" + " to 256 bytes\n"); + } + tasklet_init(&nesdev->dpc_tasklet, nes_dpc, (unsigned long)nesdev); /* bring up the Control QP */ diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h index 610b9d859597..bc0b4de04450 100644 --- a/drivers/infiniband/hw/nes/nes_hw.h +++ b/drivers/infiniband/hw/nes/nes_hw.h @@ -40,6 +40,7 @@ #define NES_PHY_TYPE_ARGUS 4 #define NES_PHY_TYPE_PUMA_1G 5 #define NES_PHY_TYPE_PUMA_10G 6 +#define NES_PHY_TYPE_GLADIUS 7 #define NES_MULTICAST_PF_MAX 8 diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 932e56fcf774..d36c9a0bf1bb 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -220,14 +220,14 @@ static int nes_bind_mw(struct ib_qp *ibqp, struct ib_mw *ibmw, if (nesqp->ibqp_state > IB_QPS_RTS) return -EINVAL; - spin_lock_irqsave(&nesqp->lock, flags); + spin_lock_irqsave(&nesqp->lock, flags); head = nesqp->hwqp.sq_head; qsize = nesqp->hwqp.sq_tail; /* Check for SQ overflow */ if (((head + (2 * qsize) - nesqp->hwqp.sq_tail) % qsize) == (qsize - 1)) { - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); return -EINVAL; } @@ -269,7 +269,7 @@ static int nes_bind_mw(struct ib_qp *ibqp, struct ib_mw *ibmw, nes_write32(nesdev->regs+NES_WQE_ALLOC, (1 << 24) | 0x00800000 | nesqp->hwqp.qp_id); - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); return 0; } @@ -349,7 +349,7 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, if (nesfmr->nesmr.pbls_used > nesadapter->free_4kpbl) { spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); ret = -ENOMEM; - goto failed_vpbl_alloc; + goto failed_vpbl_avail; } else { nesadapter->free_4kpbl -= nesfmr->nesmr.pbls_used; } @@ -357,7 +357,7 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, if (nesfmr->nesmr.pbls_used > nesadapter->free_256pbl) { spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); ret = -ENOMEM; - goto failed_vpbl_alloc; + goto failed_vpbl_avail; } else { nesadapter->free_256pbl -= nesfmr->nesmr.pbls_used; } @@ -391,14 +391,14 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, goto failed_vpbl_alloc; } - nesfmr->root_vpbl.leaf_vpbl = kzalloc(sizeof(*nesfmr->root_vpbl.leaf_vpbl)*1024, GFP_KERNEL); + nesfmr->leaf_pbl_cnt = nesfmr->nesmr.pbls_used-1; + nesfmr->root_vpbl.leaf_vpbl = kzalloc(sizeof(*nesfmr->root_vpbl.leaf_vpbl)*1024, GFP_ATOMIC); if (!nesfmr->root_vpbl.leaf_vpbl) { spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); ret = -ENOMEM; goto failed_leaf_vpbl_alloc; } - nesfmr->leaf_pbl_cnt = nesfmr->nesmr.pbls_used-1; nes_debug(NES_DBG_MR, "two level pbl, root_vpbl.pbl_vbase=%p" " leaf_pbl_cnt=%d root_vpbl.leaf_vpbl=%p\n", nesfmr->root_vpbl.pbl_vbase, nesfmr->leaf_pbl_cnt, nesfmr->root_vpbl.leaf_vpbl); @@ -519,6 +519,16 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, nesfmr->root_vpbl.pbl_pbase); failed_vpbl_alloc: + if (nesfmr->nesmr.pbls_used != 0) { + spin_lock_irqsave(&nesadapter->pbl_lock, flags); + if (nesfmr->nesmr.pbl_4k) + nesadapter->free_4kpbl += nesfmr->nesmr.pbls_used; + else + nesadapter->free_256pbl += nesfmr->nesmr.pbls_used; + spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); + } + +failed_vpbl_avail: kfree(nesfmr); failed_fmr_alloc: @@ -534,18 +544,14 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, */ static int nes_dealloc_fmr(struct ib_fmr *ibfmr) { + unsigned long flags; struct nes_mr *nesmr = to_nesmr_from_ibfmr(ibfmr); struct nes_fmr *nesfmr = to_nesfmr(nesmr); struct nes_vnic *nesvnic = to_nesvnic(ibfmr->device); struct nes_device *nesdev = nesvnic->nesdev; - struct nes_mr temp_nesmr = *nesmr; + struct nes_adapter *nesadapter = nesdev->nesadapter; int i = 0; - temp_nesmr.ibmw.device = ibfmr->device; - temp_nesmr.ibmw.pd = ibfmr->pd; - temp_nesmr.ibmw.rkey = ibfmr->rkey; - temp_nesmr.ibmw.uobject = NULL; - /* free the resources */ if (nesfmr->leaf_pbl_cnt == 0) { /* single PBL case */ @@ -561,8 +567,24 @@ static int nes_dealloc_fmr(struct ib_fmr *ibfmr) pci_free_consistent(nesdev->pcidev, 8192, nesfmr->root_vpbl.pbl_vbase, nesfmr->root_vpbl.pbl_pbase); } + nesmr->ibmw.device = ibfmr->device; + nesmr->ibmw.pd = ibfmr->pd; + nesmr->ibmw.rkey = ibfmr->rkey; + nesmr->ibmw.uobject = NULL; - return nes_dealloc_mw(&temp_nesmr.ibmw); + if (nesfmr->nesmr.pbls_used != 0) { + spin_lock_irqsave(&nesadapter->pbl_lock, flags); + if (nesfmr->nesmr.pbl_4k) { + nesadapter->free_4kpbl += nesfmr->nesmr.pbls_used; + WARN_ON(nesadapter->free_4kpbl > nesadapter->max_4kpbl); + } else { + nesadapter->free_256pbl += nesfmr->nesmr.pbls_used; + WARN_ON(nesadapter->free_256pbl > nesadapter->max_256pbl); + } + spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); + } + + return nes_dealloc_mw(&nesmr->ibmw); } @@ -1595,7 +1617,7 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries, nes_ucontext->mcrqf = req.mcrqf; if (nes_ucontext->mcrqf) { if (nes_ucontext->mcrqf & 0x80000000) - nescq->hw_cq.cq_number = nesvnic->nic.qp_id + 12 + (nes_ucontext->mcrqf & 0xf) - 1; + nescq->hw_cq.cq_number = nesvnic->nic.qp_id + 28 + 2 * ((nes_ucontext->mcrqf & 0xf) - 1); else if (nes_ucontext->mcrqf & 0x40000000) nescq->hw_cq.cq_number = nes_ucontext->mcrqf & 0xffff; else @@ -3212,7 +3234,7 @@ static int nes_post_send(struct ib_qp *ibqp, struct ib_send_wr *ib_wr, if (nesqp->ibqp_state > IB_QPS_RTS) return -EINVAL; - spin_lock_irqsave(&nesqp->lock, flags); + spin_lock_irqsave(&nesqp->lock, flags); head = nesqp->hwqp.sq_head; @@ -3337,7 +3359,7 @@ static int nes_post_send(struct ib_qp *ibqp, struct ib_send_wr *ib_wr, (counter << 24) | 0x00800000 | nesqp->hwqp.qp_id); } - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); if (err) *bad_wr = ib_wr; @@ -3368,7 +3390,7 @@ static int nes_post_recv(struct ib_qp *ibqp, struct ib_recv_wr *ib_wr, if (nesqp->ibqp_state > IB_QPS_RTS) return -EINVAL; - spin_lock_irqsave(&nesqp->lock, flags); + spin_lock_irqsave(&nesqp->lock, flags); head = nesqp->hwqp.rq_head; @@ -3421,7 +3443,7 @@ static int nes_post_recv(struct ib_qp *ibqp, struct ib_recv_wr *ib_wr, nes_write32(nesdev->regs+NES_WQE_ALLOC, (counter<<24) | nesqp->hwqp.qp_id); } - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); if (err) *bad_wr = ib_wr; @@ -3453,7 +3475,7 @@ static int nes_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry) nes_debug(NES_DBG_CQ, "\n"); - spin_lock_irqsave(&nescq->lock, flags); + spin_lock_irqsave(&nescq->lock, flags); head = nescq->hw_cq.cq_head; cq_size = nescq->hw_cq.cq_size; @@ -3562,7 +3584,7 @@ static int nes_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry) nes_debug(NES_DBG_CQ, "Reporting %u completions for CQ%u.\n", cqe_count, nescq->hw_cq.cq_number); - spin_unlock_irqrestore(&nescq->lock, flags); + spin_unlock_irqrestore(&nescq->lock, flags); return cqe_count; } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index fddded7900d1..85257f6b9576 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -106,12 +106,13 @@ int ipoib_open(struct net_device *dev) ipoib_dbg(priv, "bringing up interface\n"); - napi_enable(&priv->napi); set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags); if (ipoib_pkey_dev_delay_open(dev)) return 0; + napi_enable(&priv->napi); + if (ipoib_ib_dev_open(dev)) { napi_disable(&priv->napi); return -EINVAL; @@ -546,6 +547,7 @@ static int path_rec_start(struct net_device *dev, if (path->query_id < 0) { ipoib_warn(priv, "ib_sa_path_rec_get failed: %d\n", path->query_id); path->query = NULL; + complete(&path->done); return path->query_id; } @@ -662,7 +664,7 @@ static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev, skb_push(skb, sizeof *phdr); __skb_queue_tail(&path->queue, skb); - if (path_rec_start(dev, path)) { + if (!path->query && path_rec_start(dev, path)) { spin_unlock_irqrestore(&priv->lock, flags); path_free(dev, path); return; diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c index 6790e975a98c..bc4e40f3ede7 100644 --- a/drivers/input/ff-memless.c +++ b/drivers/input/ff-memless.c @@ -397,8 +397,9 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value) { struct ml_device *ml = dev->ff->private; struct ml_effect_state *state = &ml->states[effect_id]; + unsigned long flags; - spin_lock_bh(&ml->timer_lock); + spin_lock_irqsave(&ml->timer_lock, flags); if (value > 0) { debug("initiated play"); @@ -424,7 +425,7 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value) ml_play_effects(ml); } - spin_unlock_bh(&ml->timer_lock); + spin_unlock_irqrestore(&ml->timer_lock, flags); return 0; } diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 22016ca15351..379b7ff354ec 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -824,7 +824,7 @@ static void atkbd_disconnect(struct serio *serio) atkbd_disable(atkbd); /* make sure we don't have a command in flight */ - flush_scheduled_work(); + cancel_delayed_work_sync(&atkbd->event_work); sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group); input_unregister_device(atkbd->dev); @@ -868,6 +868,22 @@ static void atkbd_hp_keymap_fixup(struct atkbd *atkbd) } /* + * Inventec system with broken key release on volume keys + */ +static void atkbd_inventec_keymap_fixup(struct atkbd *atkbd) +{ + const unsigned int forced_release_keys[] = { + 0xae, 0xb0, + }; + int i; + + if (atkbd->set == 2) + for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++) + __set_bit(forced_release_keys[i], + atkbd->force_release_mask); +} + +/* * atkbd_set_keycode_table() initializes keyboard's keycode table * according to the selected scancode set */ @@ -1468,6 +1484,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .callback = atkbd_setup_fixup, .driver_data = atkbd_hp_keymap_fixup, }, + { + .ident = "Inventec Symphony", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"), + DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"), + }, + .callback = atkbd_setup_fixup, + .driver_data = atkbd_inventec_keymap_fixup, + }, { } }; diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c index bce160f4349b..86457feccfc4 100644 --- a/drivers/input/misc/cm109.c +++ b/drivers/input/misc/cm109.c @@ -42,7 +42,7 @@ static char *phone = "kip1000"; module_param(phone, charp, S_IRUSR); -MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01}"); +MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}"); enum { /* HID Registers */ @@ -258,6 +258,37 @@ static unsigned short keymap_usbph01(int scancode) } } +/* + * Keymap for ATCom AU-100 + * http://www.atcom.cn/En_products_AU100.html + * http://www.packetizer.com/products/au100/ + * http://www.voip-info.org/wiki/view/AU-100 + * + * Contributed by daniel@gimpelevich.san-francisco.ca.us + */ +static unsigned short keymap_atcom(int scancode) +{ + switch (scancode) { /* phone key: */ + case 0x82: return KEY_NUMERIC_0; /* 0 */ + case 0x11: return KEY_NUMERIC_1; /* 1 */ + case 0x12: return KEY_NUMERIC_2; /* 2 */ + case 0x14: return KEY_NUMERIC_3; /* 3 */ + case 0x21: return KEY_NUMERIC_4; /* 4 */ + case 0x22: return KEY_NUMERIC_5; /* 5 */ + case 0x24: return KEY_NUMERIC_6; /* 6 */ + case 0x41: return KEY_NUMERIC_7; /* 7 */ + case 0x42: return KEY_NUMERIC_8; /* 8 */ + case 0x44: return KEY_NUMERIC_9; /* 9 */ + case 0x84: return KEY_NUMERIC_POUND; /* # */ + case 0x81: return KEY_NUMERIC_STAR; /* * */ + case 0x18: return KEY_ENTER; /* pickup */ + case 0x28: return KEY_ESC; /* hangup */ + case 0x48: return KEY_LEFT; /* left arrow */ + case 0x88: return KEY_RIGHT; /* right arrow */ + default: return special_keymap(scancode); + } +} + static unsigned short (*keymap)(int) = keymap_kip1000; /* @@ -840,6 +871,10 @@ static int __init cm109_select_keymap(void) keymap = keymap_usbph01; printk(KERN_INFO KBUILD_MODNAME ": " "Keymap for Allied-Telesis Corega USBPH01 phone loaded\n"); + } else if (!strcasecmp(phone, "atcom")) { + keymap = keymap_atcom; + printk(KERN_INFO KBUILD_MODNAME ": " + "Keymap for ATCom AU-100 phone loaded\n"); } else { printk(KERN_ERR KBUILD_MODNAME ": " "Unsupported phone: %s\n", phone); diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c index e82d34201e97..88f04bf2ad6c 100644 --- a/drivers/input/mouse/hgpk.c +++ b/drivers/input/mouse/hgpk.c @@ -125,7 +125,7 @@ static void hgpk_spewing_hack(struct psmouse *psmouse, */ static int hgpk_validate_byte(unsigned char *packet) { - return (packet[0] & 0x0C) == 0x08; + return (packet[0] & 0x0C) != 0x08; } static void hgpk_process_packet(struct psmouse *psmouse) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index eec375cd10e6..29e686388a2c 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -337,6 +337,20 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "2656"), }, }, + { + .ident = "Dell XPS M1530", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"), + }, + }, + { + .ident = "Compal HEL80I", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"), + DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"), + }, + }, { } }; diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h index ca62ec639f8f..677680e9f54f 100644 --- a/drivers/input/tablet/wacom.h +++ b/drivers/input/tablet/wacom.h @@ -66,6 +66,7 @@ * - Support Intuos3 4x6 * v1.47 (pc) - Added support for Bamboo * v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX + * v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A) */ /* @@ -86,7 +87,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.48" +#define DRIVER_VERSION "v1.49" #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>" #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver" #define DRIVER_LICENSE "GPL" @@ -103,15 +104,15 @@ struct wacom { struct usb_device *usbdev; struct usb_interface *intf; struct urb *irq; - struct wacom_wac * wacom_wac; + struct wacom_wac *wacom_wac; struct mutex lock; unsigned int open:1; char phys[32]; }; struct wacom_combo { - struct wacom * wacom; - struct urb * urb; + struct wacom *wacom; + struct urb *urb; }; extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo); @@ -132,7 +133,7 @@ extern void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wa extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac); extern __u16 wacom_le16_to_cpu(unsigned char *data); extern __u16 wacom_be16_to_cpu(unsigned char *data); -extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id); -extern const struct usb_device_id * get_device_table(void); +extern struct wacom_features *get_wacom_feature(const struct usb_device_id *id); +extern const struct usb_device_id *get_device_table(void); #endif diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 09e227aa0d49..484496daa0f3 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -14,8 +14,41 @@ #include "wacom.h" #include "wacom_wac.h" +/* defines to get HID report descriptor */ +#define HID_DEVICET_HID (USB_TYPE_CLASS | 0x01) +#define HID_DEVICET_REPORT (USB_TYPE_CLASS | 0x02) +#define HID_USAGE_UNDEFINED 0x00 +#define HID_USAGE_PAGE 0x05 +#define HID_USAGE_PAGE_DIGITIZER 0x0d +#define HID_USAGE_PAGE_DESKTOP 0x01 +#define HID_USAGE 0x09 +#define HID_USAGE_X 0x30 +#define HID_USAGE_Y 0x31 +#define HID_USAGE_X_TILT 0x3d +#define HID_USAGE_Y_TILT 0x3e +#define HID_USAGE_FINGER 0x22 +#define HID_USAGE_STYLUS 0x20 +#define HID_COLLECTION 0xc0 + +enum { + WCM_UNDEFINED = 0, + WCM_DESKTOP, + WCM_DIGITIZER, +}; + +struct hid_descriptor { + struct usb_descriptor_header header; + __le16 bcdHID; + u8 bCountryCode; + u8 bNumDescriptors; + u8 bDescriptorType; + __le16 wDescriptorLength; +} __attribute__ ((packed)); + +/* defines to get/set USB message */ #define USB_REQ_GET_REPORT 0x01 #define USB_REQ_SET_REPORT 0x09 +#define WAC_HID_FEATURE_REPORT 0x03 static int usb_get_report(struct usb_interface *intf, unsigned char type, unsigned char id, void *buf, int size) @@ -80,25 +113,21 @@ static void wacom_sys_irq(struct urb *urb) void wacom_report_key(void *wcombo, unsigned int key_type, int key_data) { input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data); - return; } void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data) { input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data); - return; } void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data) { input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data); - return; } void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value) { input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value); - return; } __u16 wacom_be16_to_cpu(unsigned char *data) @@ -118,7 +147,6 @@ __u16 wacom_le16_to_cpu(unsigned char *data) void wacom_input_sync(void *wcombo) { input_sync(get_input_dev((struct wacom_combo *)wcombo)); - return; } static int wacom_open(struct input_dev *dev) @@ -160,7 +188,7 @@ static void wacom_close(struct input_dev *dev) void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_1) | + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_1) | BIT_MASK(BTN_5); input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); } @@ -170,7 +198,7 @@ void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac) input_dev->evbit[0] |= BIT_MASK(EV_MSC); input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL); input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER); - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) | + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) | BIT_MASK(BTN_4); } @@ -178,7 +206,7 @@ void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { input_dev->evbit[0] |= BIT_MASK(EV_REL); input_dev->relbit[0] |= BIT_MASK(REL_WHEEL); - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) | + input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE); input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) | BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2); @@ -188,7 +216,7 @@ void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac) void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER); - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) | + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) | BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3); input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); @@ -196,14 +224,14 @@ void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac) void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_4) | + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_4) | BIT_MASK(BTN_5) | BIT_MASK(BTN_6) | BIT_MASK(BTN_7); input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); } void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9); + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9); } void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) @@ -211,7 +239,7 @@ void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) input_dev->evbit[0] |= BIT_MASK(EV_MSC) | BIT_MASK(EV_REL); input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL); input_dev->relbit[0] |= BIT_MASK(REL_WHEEL); - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) | + input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA); input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) | @@ -228,8 +256,7 @@ void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { - input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2) | - BIT_MASK(BTN_TOOL_RUBBER); + input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2); } void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac) @@ -237,15 +264,129 @@ void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac) input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER); } +static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc, + struct wacom_wac *wacom_wac) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct wacom_features *features = wacom_wac->features; + char limit = 0, result = 0; + int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0; + unsigned char *report; + + report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL); + if (!report) + return -ENOMEM; + + /* retrive report descriptors */ + do { + result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + USB_REQ_GET_DESCRIPTOR, + USB_RECIP_INTERFACE | USB_DIR_IN, + HID_DEVICET_REPORT << 8, + intf->altsetting[0].desc.bInterfaceNumber, /* interface */ + report, + hid_desc->wDescriptorLength, + 5000); /* 5 secs */ + } while (result < 0 && limit++ < 5); + + if (result < 0) + goto out; + + for (i = 0; i < hid_desc->wDescriptorLength; i++) { + + switch (report[i]) { + case HID_USAGE_PAGE: + switch (report[i + 1]) { + case HID_USAGE_PAGE_DIGITIZER: + usage = WCM_DIGITIZER; + i++; + break; + + case HID_USAGE_PAGE_DESKTOP: + usage = WCM_DESKTOP; + i++; + break; + } + break; + + case HID_USAGE: + switch (report[i + 1]) { + case HID_USAGE_X: + if (usage == WCM_DESKTOP) { + if (finger) { + features->touch_x_max = + features->touch_y_max = + wacom_le16_to_cpu(&report[i + 3]); + features->x_max = + wacom_le16_to_cpu(&report[i + 6]); + i += 7; + } else if (pen) { + features->x_max = + wacom_le16_to_cpu(&report[i + 3]); + i += 4; + } + } else if (usage == WCM_DIGITIZER) { + /* max pressure isn't reported + features->pressure_max = (unsigned short) + (report[i+4] << 8 | report[i + 3]); + */ + features->pressure_max = 255; + i += 4; + } + break; + + case HID_USAGE_Y: + if (usage == WCM_DESKTOP) + features->y_max = + wacom_le16_to_cpu(&report[i + 3]); + i += 4; + break; + + case HID_USAGE_FINGER: + finger = 1; + i++; + break; + + case HID_USAGE_STYLUS: + pen = 1; + i++; + break; + + case HID_USAGE_UNDEFINED: + if (usage == WCM_DESKTOP && finger) /* capacity */ + features->pressure_max = + wacom_le16_to_cpu(&report[i + 3]); + i += 4; + break; + } + break; + + case HID_COLLECTION: + /* reset UsagePage ans Finger */ + finger = usage = 0; + break; + } + } + + result = 0; + + out: + kfree(report); + return result; +} + static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *dev = interface_to_usbdev(intf); + struct usb_host_interface *interface = intf->cur_altsetting; struct usb_endpoint_descriptor *endpoint; struct wacom *wacom; struct wacom_wac *wacom_wac; + struct wacom_features *features; struct input_dev *input_dev; int error = -ENOMEM; char rep_data[2], limit = 0; + struct hid_descriptor *hid_desc; wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL); @@ -268,8 +409,8 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i usb_make_path(dev, wacom->phys, sizeof(wacom->phys)); strlcat(wacom->phys, "/input0", sizeof(wacom->phys)); - wacom_wac->features = get_wacom_feature(id); - BUG_ON(wacom_wac->features->pktlen > 10); + wacom_wac->features = features = get_wacom_feature(id); + BUG_ON(features->pktlen > 10); input_dev->name = wacom_wac->features->name; wacom->wacom_wac = wacom_wac; @@ -282,18 +423,37 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i input_dev->open = wacom_open; input_dev->close = wacom_close; + endpoint = &intf->cur_altsetting->endpoint[0].desc; + + /* TabletPC need to retrieve the physical and logical maximum from report descriptor */ + if (wacom_wac->features->type == TABLETPC) { + if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) { + if (usb_get_extra_descriptor(&interface->endpoint[0], + HID_DEVICET_REPORT, &hid_desc)) { + printk("wacom: can not retrive extra class descriptor\n"); + goto fail2; + } + } + error = wacom_parse_hid(intf, hid_desc, wacom_wac); + if (error) + goto fail2; + } + input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) | BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS); - input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0); - input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0); + input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0); + input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0); + if (features->type == TABLETPC) { + input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_DOUBLETAP); + input_set_abs_params(input_dev, ABS_RX, 0, features->touch_x_max, 4, 0); + input_set_abs_params(input_dev, ABS_RY, 0, features->touch_y_max, 4, 0); + } input_dev->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC); wacom_init_input_dev(input_dev, wacom_wac); - endpoint = &intf->cur_altsetting->endpoint[0].desc; - usb_fill_int_urb(wacom->irq, dev, usb_rcvintpipe(dev, endpoint->bEndpointAddress), wacom_wac->data, wacom_wac->features->pktlen, @@ -305,13 +465,22 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i if (error) goto fail3; - /* Ask the tablet to report tablet data. Repeat until it succeeds */ - do { - rep_data[0] = 2; - rep_data[1] = 2; - usb_set_report(intf, 3, 2, rep_data, 2); - usb_get_report(intf, 3, 2, rep_data, 2); - } while (rep_data[1] != 2 && limit++ < 5); + /* + * Ask the tablet to report tablet data if it is not a Tablet PC. + * Repeat until it succeeds + */ + if (wacom_wac->features->type != TABLETPC) { + do { + rep_data[0] = 2; + rep_data[1] = 2; + error = usb_set_report(intf, WAC_HID_FEATURE_REPORT, + 2, rep_data, 2); + if (error >= 0) + error = usb_get_report(intf, + WAC_HID_FEATURE_REPORT, 2, + rep_data, 2); + } while ((error < 0 || rep_data[1] != 2) && limit++ < 5); + } usb_set_intfdata(intf, wacom); return 0; @@ -333,7 +502,8 @@ static void wacom_disconnect(struct usb_interface *intf) usb_kill_urb(wacom->irq); input_unregister_device(wacom->dev); usb_free_urb(wacom->irq); - usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma); + usb_buffer_free(interface_to_usbdev(intf), 10, + wacom->wacom_wac->data, wacom->data_dma); kfree(wacom->wacom_wac); kfree(wacom); } diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index bf3d9a8b2c1b..8dc8d1e59bea 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -535,31 +535,147 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo) return 1; } +int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo) +{ + char *data = wacom->data; + int prox = 0, pressure; + static int stylusInProx, touchInProx = 1, touchOut; + struct urb *urb = ((struct wacom_combo *)wcombo)->urb; + + dbg("wacom_tpc_irq: received report #%d", data[0]); + + if (urb->actual_length == 5 || data[0] == 6) { /* Touch data */ + if (urb->actual_length == 5) { /* with touch */ + prox = data[0] & 0x03; + } else { /* with capacity */ + prox = data[1] & 0x03; + } + + if (!stylusInProx) { /* stylus not in prox */ + if (prox) { + if (touchInProx) { + wacom->tool[1] = BTN_TOOL_DOUBLETAP; + wacom->id[0] = TOUCH_DEVICE_ID; + if (urb->actual_length != 5) { + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4])); + wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6])); + wacom_report_key(wcombo, BTN_TOUCH, wacom_le16_to_cpu(&data[6])); + } else { + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3])); + wacom_report_key(wcombo, BTN_TOUCH, 1); + } + wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); + wacom_report_key(wcombo, wacom->tool[1], prox & 0x01); + touchOut = 1; + return 1; + } + } else { + wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); + wacom_report_key(wcombo, wacom->tool[1], prox & 0x01); + wacom_report_key(wcombo, BTN_TOUCH, 0); + touchOut = 0; + touchInProx = 1; + return 1; + } + } else if (touchOut || !prox) { /* force touch out-prox */ + wacom_report_abs(wcombo, ABS_MISC, TOUCH_DEVICE_ID); + wacom_report_key(wcombo, BTN_TOUCH, 0); + touchOut = 0; + touchInProx = 1; + return 1; + } + } else if (data[0] == 2) { /* Penabled */ + prox = data[1] & 0x20; + + touchInProx = 0; + + wacom->id[0] = ERASER_DEVICE_ID; + + /* + * if going from out of proximity into proximity select between the eraser + * and the pen based on the state of the stylus2 button, choose eraser if + * pressed else choose pen. if not a proximity change from out to in, send + * an out of proximity for previous tool then a in for new tool. + */ + if (prox) { /* in prox */ + if (!wacom->tool[0]) { + /* Going into proximity select tool */ + wacom->tool[1] = (data[1] & 0x08) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + if (wacom->tool[1] == BTN_TOOL_PEN) + wacom->id[0] = STYLUS_DEVICE_ID; + } else if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[1] & 0x08)) { + /* + * was entered with stylus2 pressed + * report out proximity for previous tool + */ + wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); + wacom_report_key(wcombo, wacom->tool[1], 0); + wacom_input_sync(wcombo); + + /* set new tool */ + wacom->tool[1] = BTN_TOOL_PEN; + wacom->id[0] = STYLUS_DEVICE_ID; + return 0; + } + if (wacom->tool[1] != BTN_TOOL_RUBBER) { + /* Unknown tool selected default to pen tool */ + wacom->tool[1] = BTN_TOOL_PEN; + wacom->id[0] = STYLUS_DEVICE_ID; + } + wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02); + wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10); + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4])); + pressure = ((data[7] & 0x01) << 8) | data[6]; + if (pressure < 0) + pressure = wacom->features->pressure_max + pressure + 1; + wacom_report_abs(wcombo, ABS_PRESSURE, pressure); + wacom_report_key(wcombo, BTN_TOUCH, pressure); + } else { + wacom_report_abs(wcombo, ABS_PRESSURE, 0); + wacom_report_key(wcombo, BTN_STYLUS, 0); + wacom_report_key(wcombo, BTN_STYLUS2, 0); + wacom_report_key(wcombo, BTN_TOUCH, 0); + } + wacom_report_key(wcombo, wacom->tool[1], prox); + wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); + stylusInProx = prox; + wacom->tool[0] = prox; + return 1; + } + return 0; +} + int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo) { switch (wacom_wac->features->type) { case PENPARTNER: - return (wacom_penpartner_irq(wacom_wac, wcombo)); - break; + return wacom_penpartner_irq(wacom_wac, wcombo); + case PL: - return (wacom_pl_irq(wacom_wac, wcombo)); - break; + return wacom_pl_irq(wacom_wac, wcombo); + case WACOM_G4: case GRAPHIRE: case WACOM_MO: - return (wacom_graphire_irq(wacom_wac, wcombo)); - break; + return wacom_graphire_irq(wacom_wac, wcombo); + case PTU: - return (wacom_ptu_irq(wacom_wac, wcombo)); - break; + return wacom_ptu_irq(wacom_wac, wcombo); + case INTUOS: case INTUOS3S: case INTUOS3: case INTUOS3L: case CINTIQ: case WACOM_BEE: - return (wacom_intuos_irq(wacom_wac, wcombo)); - break; + return wacom_intuos_irq(wacom_wac, wcombo); + + case TABLETPC: + return wacom_tpc_irq(wacom_wac, wcombo); + default: return 0; } @@ -586,13 +702,15 @@ void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_w /* fall through */ case INTUOS3S: input_dev_i3s(input_dev, wacom_wac); + /* fall through */ case INTUOS: input_dev_i(input_dev, wacom_wac); break; case PL: case PTU: + case TABLETPC: input_dev_pl(input_dev, wacom_wac); - break; + /* fall through */ case PENPARTNER: input_dev_pt(input_dev, wacom_wac); break; @@ -611,6 +729,7 @@ static struct wacom_features wacom_features[] = { { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 }, { "Wacom BambooFun 4x5", 9, 14760, 9225, 511, 63, WACOM_MO }, { "Wacom BambooFun 6x8", 9, 21648, 13530, 511, 63, WACOM_MO }, + { "Wacom Bamboo1 Medium",8, 16704, 12064, 511, 63, GRAPHIRE }, { "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE }, { "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE }, { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE }, @@ -650,6 +769,10 @@ static struct wacom_features wacom_features[] = { { "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ }, { "Wacom Cintiq 20WSX", 10, 86680, 54180, 1023, 63, WACOM_BEE }, { "Wacom Cintiq 12WX", 10, 53020, 33440, 1023, 63, WACOM_BEE }, + { "Wacom DTU1931", 8, 37832, 30305, 511, 0, PL }, + { "Wacom ISDv4 90", 8, 26202, 16325, 255, 0, TABLETPC }, + { "Wacom ISDv4 93", 8, 26202, 16325, 255, 0, TABLETPC }, + { "Wacom ISDv4 9A", 8, 26202, 16325, 255, 0, TABLETPC }, { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, { } }; @@ -665,6 +788,7 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x17) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x18) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x19) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) }, @@ -704,18 +828,26 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC5) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC7) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x90) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x93) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x9A) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) }, { } }; -const struct usb_device_id * get_device_table(void) { - const struct usb_device_id * id_table = wacom_ids; +const struct usb_device_id *get_device_table(void) +{ + const struct usb_device_id *id_table = wacom_ids; + return id_table; } -struct wacom_features * get_wacom_feature(const struct usb_device_id * id) { +struct wacom_features * get_wacom_feature(const struct usb_device_id *id) +{ int index = id - wacom_ids; struct wacom_features *wf = &wacom_features[index]; + return wf; } diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index 3342bc05847d..f9c8b69673b7 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -10,6 +10,7 @@ #define WACOM_WAC_H #define STYLUS_DEVICE_ID 0x02 +#define TOUCH_DEVICE_ID 0x03 #define CURSOR_DEVICE_ID 0x06 #define ERASER_DEVICE_ID 0x0A #define PAD_DEVICE_ID 0x0F @@ -27,6 +28,7 @@ enum { CINTIQ, WACOM_BEE, WACOM_MO, + TABLETPC, MAX_TYPE }; @@ -38,6 +40,8 @@ struct wacom_features { int pressure_max; int distance_max; int type; + int touch_x_max; + int touch_y_max; }; struct wacom_wac { diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c index d20689cdbd5d..8f38c5e55ce6 100644 --- a/drivers/input/touchscreen/elo.c +++ b/drivers/input/touchscreen/elo.c @@ -262,7 +262,7 @@ static int elo_setup_10(struct elo *elo) input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0); printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, " - "features: %x02x, controller: 0x%02x\n", + "features: 0x%02x, controller: 0x%02x\n", elo_types[(packet[1] -'0') & 0x03], packet[5], packet[4], packet[3], packet[7]); diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c index 3ab6362f043c..928d2ed8865f 100644 --- a/drivers/input/xen-kbdfront.c +++ b/drivers/input/xen-kbdfront.c @@ -323,7 +323,7 @@ static struct xenbus_device_id xenkbd_ids[] = { { "" } }; -static struct xenbus_driver xenkbd = { +static struct xenbus_driver xenkbd_driver = { .name = "vkbd", .owner = THIS_MODULE, .ids = xenkbd_ids, @@ -342,12 +342,12 @@ static int __init xenkbd_init(void) if (xen_initial_domain()) return -ENODEV; - return xenbus_register_frontend(&xenkbd); + return xenbus_register_frontend(&xenkbd_driver); } static void __exit xenkbd_cleanup(void) { - xenbus_unregister_driver(&xenkbd); + xenbus_unregister_driver(&xenkbd_driver); } module_init(xenkbd_init); diff --git a/drivers/isdn/hardware/avm/b1isa.c b/drivers/isdn/hardware/avm/b1isa.c index 1e288eeb5e2a..6461a32bc838 100644 --- a/drivers/isdn/hardware/avm/b1isa.c +++ b/drivers/isdn/hardware/avm/b1isa.c @@ -233,10 +233,8 @@ static void __exit b1isa_exit(void) int i; for (i = 0; i < MAX_CARDS; i++) { - if (!io[i]) - break; - - b1isa_remove(&isa_dev[i]); + if (isa_dev[i].resource[0].start) + b1isa_remove(&isa_dev[i]); } unregister_capi_driver(&capi_driver_b1isa); } diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c index 84d75a3f5d17..ded9d0baf607 100644 --- a/drivers/isdn/hisax/config.c +++ b/drivers/isdn/hisax/config.c @@ -1213,7 +1213,7 @@ static void HiSax_shiftcards(int idx) memcpy(&cards[i], &cards[i + 1], sizeof(cards[i])); } -static int HiSax_inithardware(int *busy_flag) +static int __init HiSax_inithardware(int *busy_flag) { int foundcards = 0; int i = 0; @@ -1542,7 +1542,9 @@ static void __exit HiSax_exit(void) printk(KERN_INFO "HiSax module removed\n"); } -int hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card) +#ifdef CONFIG_HOTPLUG + +int __devinit hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card) { u_char ids[16]; int ret = -1; @@ -1563,6 +1565,8 @@ error: } EXPORT_SYMBOL(hisax_init_pcmcia); +#endif + EXPORT_SYMBOL(HiSax_closecard); #include "hisax_if.h" @@ -1580,6 +1584,11 @@ static void hisax_bc_close(struct BCState *bcs); static void hisax_bh(struct work_struct *work); static void EChannel_proc_rcv(struct hisax_d_if *d_if); +static int hisax_setup_card_dynamic(struct IsdnCard *card) +{ + return 2; +} + int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[], char *name, int protocol) { @@ -1599,7 +1608,8 @@ int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[], cards[i].protocol = protocol; sprintf(id, "%s%d", name, i); nrcards++; - retval = checkcard(i, id, NULL, hisax_d_if->owner, hisax_cs_setup_card); + retval = checkcard(i, id, NULL, hisax_d_if->owner, + hisax_setup_card_dynamic); if (retval == 0) { // yuck cards[i].typ = 0; nrcards--; diff --git a/drivers/isdn/hysdn/hysdn_net.c b/drivers/isdn/hysdn/hysdn_net.c index cfa8fa5e44ab..3f2a0a20c19b 100644 --- a/drivers/isdn/hysdn/hysdn_net.c +++ b/drivers/isdn/hysdn/hysdn_net.c @@ -83,12 +83,12 @@ net_open(struct net_device *dev) /* Fill in the MAC-level header (if not already set) */ if (!card->mac_addr[0]) { - for (i = 0; i < ETH_ALEN - sizeof(unsigned long); i++) + for (i = 0; i < ETH_ALEN; i++) dev->dev_addr[i] = 0xfc; if ((in_dev = dev->ip_ptr) != NULL) { struct in_ifaddr *ifa = in_dev->ifa_list; if (ifa != NULL) - memcpy(dev->dev_addr + (ETH_ALEN - sizeof(unsigned long)), &ifa->ifa_local, sizeof(unsigned long)); + memcpy(dev->dev_addr + (ETH_ALEN - sizeof(ifa->ifa_local)), &ifa->ifa_local, sizeof(ifa->ifa_local)); } } else memcpy(dev->dev_addr, card->mac_addr, ETH_ALEN); diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c index bb904a0a98bd..1bfc55d7a26c 100644 --- a/drivers/isdn/i4l/isdn_net.c +++ b/drivers/isdn/i4l/isdn_net.c @@ -1641,8 +1641,10 @@ isdn_net_ciscohdlck_slarp_send_reply(isdn_net_local *lp) /* slarp reply, send own ip/netmask; if values are nonsense remote * should think we are unable to provide it with an address via SLARP */ p += put_u32(p, CISCO_SLARP_REPLY); - p += put_u32(p, addr); // address - p += put_u32(p, mask); // netmask + *(__be32 *)p = addr; // address + p += 4; + *(__be32 *)p = mask; // netmask + p += 4; p += put_u16(p, 0); // unused isdn_net_write_super(lp, skb); diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c index 2c21d4f25cc8..a98ab72adf95 100644 --- a/drivers/macintosh/rack-meter.c +++ b/drivers/macintosh/rack-meter.c @@ -288,7 +288,7 @@ static void __devexit rackmeter_stop_cpu_sniffer(struct rackmeter *rm) cancel_rearming_delayed_work(&rm->cpu[1].sniffer); } -static int rackmeter_setup(struct rackmeter *rm) +static int __devinit rackmeter_setup(struct rackmeter *rm) { pr_debug("rackmeter: setting up i2s..\n"); rackmeter_setup_i2s(rm); @@ -582,12 +582,12 @@ static struct of_device_id rackmeter_match[] = { { } }; -static struct macio_driver rackmeter_drv = { +static struct macio_driver rackmeter_driver = { .name = "rackmeter", .owner = THIS_MODULE, .match_table = rackmeter_match, .probe = rackmeter_probe, - .remove = rackmeter_remove, + .remove = __devexit_p(rackmeter_remove), .shutdown = rackmeter_shutdown, }; @@ -596,14 +596,14 @@ static int __init rackmeter_init(void) { pr_debug("rackmeter_init()\n"); - return macio_register_driver(&rackmeter_drv); + return macio_register_driver(&rackmeter_driver); } static void __exit rackmeter_exit(void) { pr_debug("rackmeter_exit()\n"); - macio_unregister_driver(&rackmeter_drv); + macio_unregister_driver(&rackmeter_driver); } module_init(rackmeter_init); diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index ac89a5deaca2..ab7c8e4a61f9 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -208,16 +208,19 @@ static void bitmap_checkfree(struct bitmap *bitmap, unsigned long page) */ /* IO operations when bitmap is stored near all superblocks */ -static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long index) +static struct page *read_sb_page(mddev_t *mddev, long offset, + struct page *page, + unsigned long index, int size) { /* choose a good rdev and read the page from there */ mdk_rdev_t *rdev; struct list_head *tmp; - struct page *page = alloc_page(GFP_KERNEL); sector_t target; if (!page) + page = alloc_page(GFP_KERNEL); + if (!page) return ERR_PTR(-ENOMEM); rdev_for_each(rdev, tmp, mddev) { @@ -227,7 +230,9 @@ static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long inde target = rdev->sb_start + offset + index * (PAGE_SIZE/512); - if (sync_page_io(rdev->bdev, target, PAGE_SIZE, page, READ)) { + if (sync_page_io(rdev->bdev, target, + roundup(size, bdev_hardsect_size(rdev->bdev)), + page, READ)) { page->index = index; attach_page_buffers(page, NULL); /* so that free_buffer will * quietly no-op */ @@ -544,7 +549,9 @@ static int bitmap_read_sb(struct bitmap *bitmap) bitmap->sb_page = read_page(bitmap->file, 0, bitmap, bytes); } else { - bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset, 0); + bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset, + NULL, + 0, sizeof(bitmap_super_t)); } if (IS_ERR(bitmap->sb_page)) { err = PTR_ERR(bitmap->sb_page); @@ -957,11 +964,16 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start) */ page = bitmap->sb_page; offset = sizeof(bitmap_super_t); + read_sb_page(bitmap->mddev, bitmap->offset, + page, + index, count); } else if (file) { page = read_page(file, index, bitmap, count); offset = 0; } else { - page = read_sb_page(bitmap->mddev, bitmap->offset, index); + page = read_sb_page(bitmap->mddev, bitmap->offset, + NULL, + index, count); offset = 0; } if (IS_ERR(page)) { /* read error */ diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 4840733cd903..3d7f4923cd13 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -441,13 +441,13 @@ static void process_queued_ios(struct work_struct *work) __choose_pgpath(m); pgpath = m->current_pgpath; - m->pgpath_to_activate = m->current_pgpath; if ((pgpath && !m->queue_io) || (!pgpath && !m->queue_if_no_path)) must_queue = 0; - if (m->pg_init_required && !m->pg_init_in_progress) { + if (m->pg_init_required && !m->pg_init_in_progress && pgpath) { + m->pgpath_to_activate = pgpath; m->pg_init_count++; m->pg_init_required = 0; m->pg_init_in_progress = 1; @@ -708,6 +708,10 @@ static int parse_hw_handler(struct arg_set *as, struct multipath *m) m->hw_handler_name = NULL; return -EINVAL; } + + if (hw_argc > 1) + DMWARN("Ignoring user-specified arguments for " + "hardware handler \"%s\"", m->hw_handler_name); consume(as, hw_argc - 1); return 0; diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 9d7b53ed75b2..ec43f9fa4b2a 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -1032,6 +1032,7 @@ static void mirror_dtr(struct dm_target *ti) del_timer_sync(&ms->timer); flush_workqueue(ms->kmirrord_wq); + flush_scheduled_work(); dm_kcopyd_client_destroy(ms->kcopyd_client); destroy_workqueue(ms->kmirrord_wq); free_context(ms, ti, ms->nr_mirrors); diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c index a2d068dbe9e2..9e4ef88d421e 100644 --- a/drivers/md/dm-stripe.c +++ b/drivers/md/dm-stripe.c @@ -320,8 +320,10 @@ int __init dm_stripe_init(void) int r; r = dm_register_target(&stripe_target); - if (r < 0) + if (r < 0) { DMWARN("target registration failed"); + return r; + } kstriped = create_singlethread_workqueue("kstriped"); if (!kstriped) { diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index a63161aec487..04e5fd742c2c 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -668,7 +668,7 @@ static void check_for_valid_limits(struct io_restrictions *rs) if (!rs->max_segment_size) rs->max_segment_size = MAX_SEGMENT_SIZE; if (!rs->seg_boundary_mask) - rs->seg_boundary_mask = -1; + rs->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK; if (!rs->bounce_pfn) rs->bounce_pfn = -1; } diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 6963ad148408..c99e4728ff41 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -375,7 +375,7 @@ static void start_io_acct(struct dm_io *io) dm_disk(md)->part0.in_flight = atomic_inc_return(&md->pending); } -static int end_io_acct(struct dm_io *io) +static void end_io_acct(struct dm_io *io) { struct mapped_device *md = io->md; struct bio *bio = io->bio; @@ -391,7 +391,9 @@ static int end_io_acct(struct dm_io *io) dm_disk(md)->part0.in_flight = pending = atomic_dec_return(&md->pending); - return !pending; + /* nudge anyone waiting on suspend queue */ + if (!pending) + wake_up(&md->wait); } /* @@ -499,9 +501,7 @@ static void dec_pending(struct dm_io *io, int error) spin_unlock_irqrestore(&io->md->pushback_lock, flags); } - if (end_io_acct(io)) - /* nudge anyone waiting on suspend queue */ - wake_up(&io->md->wait); + end_io_acct(io); if (io->error != DM_ENDIO_REQUEUE) { blk_add_trace_bio(io->md->queue, io->bio, @@ -937,16 +937,24 @@ static void dm_unplug_all(struct request_queue *q) static int dm_any_congested(void *congested_data, int bdi_bits) { - int r; - struct mapped_device *md = (struct mapped_device *) congested_data; - struct dm_table *map = dm_get_table(md); + int r = bdi_bits; + struct mapped_device *md = congested_data; + struct dm_table *map; - if (!map || test_bit(DMF_BLOCK_IO, &md->flags)) - r = bdi_bits; - else - r = dm_table_any_congested(map, bdi_bits); + atomic_inc(&md->pending); + + if (!test_bit(DMF_BLOCK_IO, &md->flags)) { + map = dm_get_table(md); + if (map) { + r = dm_table_any_congested(map, bdi_bits); + dm_table_put(map); + } + } + + if (!atomic_dec_return(&md->pending)) + /* nudge anyone waiting on suspend queue */ + wake_up(&md->wait); - dm_table_put(map); return r; } diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c index 14e627ef6465..c1d92f838ca8 100644 --- a/drivers/media/dvb/dm1105/dm1105.c +++ b/drivers/media/dvb/dm1105/dm1105.c @@ -376,7 +376,7 @@ static void dm1105dvb_dma_unmap(struct dm1105dvb *dm1105dvb) pci_free_consistent(dm1105dvb->pdev, 6*DM1105_DMA_BYTES, dm1105dvb->ts_buf, dm1105dvb->dma_addr); } -static void __devinit dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb) +static void dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb) { outb(INTMAK_ALLMASK, dm_io_mem(DM1105_INTMAK)); outb(1, dm_io_mem(DM1105_CR)); diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 5689d1f1d444..7a421e9dba5a 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -223,6 +223,8 @@ static void dvb_frontend_init(struct dvb_frontend *fe) if (fe->ops.init) fe->ops.init(fe); if (fe->ops.tuner_ops.init) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); fe->ops.tuner_ops.init(fe); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); @@ -583,6 +585,8 @@ restart: if (fe->ops.set_voltage) fe->ops.set_voltage(fe, SEC_VOLTAGE_OFF); if (fe->ops.tuner_ops.sleep) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); fe->ops.tuner_ops.sleep(fe); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); @@ -932,7 +936,8 @@ void dtv_property_dump(struct dtv_property *tvp) int is_legacy_delivery_system(fe_delivery_system_t s) { if((s == SYS_UNDEFINED) || (s == SYS_DVBC_ANNEX_AC) || - (s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS)) + (s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS) || + (s == SYS_ATSC)) return 1; return 0; diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 3c13bcfa6385..62b68c291d99 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -261,7 +261,7 @@ config DVB_USB_DW2102 Say Y here to support the DvbWorld DVB-S/S2 USB2.0 receivers and the TeVii S650. -config DVB_USB_CINERGY_T2 +config DVB_USB_CINERGY_T2 tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver" depends on DVB_USB help @@ -283,6 +283,7 @@ config DVB_USB_ANYSEE config DVB_USB_DTV5100 tristate "AME DTV-5100 USB2.0 DVB-T support" depends on DVB_USB + select DVB_ZL10353 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE help Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver. diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index cb0829c038ce..e9ab0249d133 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -31,13 +31,13 @@ #include "mc44s80x.h" #endif -int dvb_usb_af9015_debug; +static int dvb_usb_af9015_debug; module_param_named(debug, dvb_usb_af9015_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); -int dvb_usb_af9015_remote; +static int dvb_usb_af9015_remote; module_param_named(remote, dvb_usb_af9015_remote, int, 0644); MODULE_PARM_DESC(remote, "select remote"); -int dvb_usb_af9015_dual_mode; +static int dvb_usb_af9015_dual_mode; module_param_named(dual_mode, dvb_usb_af9015_dual_mode, int, 0644); MODULE_PARM_DESC(dual_mode, "enable dual mode"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -46,7 +46,7 @@ static DEFINE_MUTEX(af9015_usb_mutex); static struct af9015_config af9015_config; static struct dvb_usb_device_properties af9015_properties[2]; -int af9015_properties_count = ARRAY_SIZE(af9015_properties); +static int af9015_properties_count = ARRAY_SIZE(af9015_properties); static struct af9013_config af9015_af9013_config[] = { { @@ -549,7 +549,7 @@ static int af9015_eeprom_dump(struct dvb_usb_device *d) return 0; } -int af9015_download_ir_table(struct dvb_usb_device *d) +static int af9015_download_ir_table(struct dvb_usb_device *d) { int i, packets = 0, ret; u16 addr = 0x9a56; /* ir-table start address */ @@ -681,12 +681,6 @@ static int af9015_download_firmware(struct usb_device *udev, goto error; } - /* firmware is running, reconnect device in the usb bus */ - req.cmd = RECONNECT_USB; - ret = af9015_rw_udev(udev, &req); - if (ret) - err("reconnect failed: %d", ret); - error: return ret; } @@ -999,7 +993,7 @@ static int af9015_rc_query(struct dvb_usb_device *d, u32 *event, int *state) } /* init 2nd I2C adapter */ -int af9015_i2c_init(struct dvb_usb_device *d) +static int af9015_i2c_init(struct dvb_usb_device *d) { int ret; struct af9015_state *state = d->priv; @@ -1208,6 +1202,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .usb_ctrl = DEVICE_SPECIFIC, .download_firmware = af9015_download_firmware, .firmware = "dvb-usb-af9015.fw", + .no_reconnect = 1, .size_of_priv = sizeof(struct af9015_state), \ @@ -1306,6 +1301,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .usb_ctrl = DEVICE_SPECIFIC, .download_firmware = af9015_download_firmware, .firmware = "dvb-usb-af9015.fw", + .no_reconnect = 1, .size_of_priv = sizeof(struct af9015_state), \ @@ -1419,7 +1415,7 @@ static int af9015_usb_probe(struct usb_interface *intf, return ret; } -void af9015_i2c_exit(struct dvb_usb_device *d) +static void af9015_i2c_exit(struct dvb_usb_device *d) { struct af9015_state *state = d->priv; deb_info("%s: \n", __func__); diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h index 882e8a4b3681..6c3c97293316 100644 --- a/drivers/media/dvb/dvb-usb/af9015.h +++ b/drivers/media/dvb/dvb-usb/af9015.h @@ -27,7 +27,6 @@ #define DVB_USB_LOG_PREFIX "af9015" #include "dvb-usb.h" -extern int dvb_usb_af9015_debug; #define deb_info(args...) dprintk(dvb_usb_af9015_debug, 0x01, args) #define deb_rc(args...) dprintk(dvb_usb_af9015_debug, 0x02, args) #define deb_xfer(args...) dprintk(dvb_usb_af9015_debug, 0x04, args) diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index c786359fba03..cd2edbcaa097 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -46,7 +46,7 @@ module_param_named(delsys, dvb_usb_anysee_delsys, int, 0644); MODULE_PARM_DESC(delsys, "select delivery mode (0=DVB-C, 1=DVB-T)"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); -static struct mutex anysee_usb_mutex; +static DEFINE_MUTEX(anysee_usb_mutex); static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, u8 *rbuf, u8 rlen) @@ -456,8 +456,6 @@ static int anysee_probe(struct usb_interface *intf, struct usb_host_interface *alt; int ret; - mutex_init(&anysee_usb_mutex); - /* There is one interface with two alternate settings. Alternate setting 0 is for bulk transfer. Alternate setting 1 is for isochronous transfer. diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h index 739193943c17..8b544fe79b0d 100644 --- a/drivers/media/dvb/dvb-usb/dib0700.h +++ b/drivers/media/dvb/dvb-usb/dib0700.h @@ -22,7 +22,7 @@ extern int dvb_usb_dib0700_debug; #define REQUEST_I2C_READ 0x2 #define REQUEST_I2C_WRITE 0x3 -#define REQUEST_POLL_RC 0x4 +#define REQUEST_POLL_RC 0x4 /* deprecated in firmware v1.20 */ #define REQUEST_JUMPRAM 0x8 #define REQUEST_SET_CLOCK 0xB #define REQUEST_SET_GPIO 0xC @@ -40,11 +40,14 @@ struct dib0700_state { u16 mt2060_if1[2]; u8 rc_toggle; u8 rc_counter; + u8 rc_func_version; u8 is_dib7000pc; u8 fw_use_new_i2c_api; u8 disable_streaming_master_mode; }; +extern int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion, + u32 *romversion, u32 *ramversion, u32 *fwtype); extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val); extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3); extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen); diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c index dd53cee3896d..200b215f4d8b 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -19,6 +19,22 @@ MODULE_PARM_DESC(dvb_usb_dib0700_ir_proto, "set ir protocol (0=NEC, 1=RC5 (defau DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion, + u32 *romversion, u32 *ramversion, u32 *fwtype) +{ + u8 b[16]; + int ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), + REQUEST_GET_VERSION, + USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, + b, sizeof(b), USB_CTRL_GET_TIMEOUT); + *hwversion = (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3]; + *romversion = (b[4] << 24) | (b[5] << 16) | (b[6] << 8) | b[7]; + *ramversion = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11]; + *fwtype = (b[12] << 24) | (b[13] << 16) | (b[14] << 8) | b[15]; + return ret; +} + /* expecting rx buffer: request data[0] data[1] ... data[2] */ static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen) { diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 0cfccc24b190..f28d3ae59e04 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -38,6 +38,7 @@ static struct mt2060_config bristol_mt2060_config[2] = { } }; + static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = { .band_caps = BAND_VHF | BAND_UHF, .setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0), @@ -451,8 +452,13 @@ static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; /* Number of keypresses to ignore before start repeating */ #define RC_REPEAT_DELAY 2 +#define RC_REPEAT_DELAY_V1_20 5 -static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state) + + +/* Used by firmware versions < 1.20 (deprecated) */ +static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event, + int *state) { u8 key[4]; int i; @@ -529,6 +535,137 @@ static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state) return 0; } +/* This is the structure of the RC response packet starting in firmware 1.20 */ +struct dib0700_rc_response { + u8 report_id; + u8 data_state; + u8 system_msb; + u8 system_lsb; + u8 data; + u8 not_data; +}; + +/* This supports the new IR response format for firmware v1.20 */ +static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event, + int *state) +{ + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + struct dib0700_state *st = d->priv; + struct dib0700_rc_response poll_reply; + u8 buf[6]; + int i; + int status; + int actlen; + int found = 0; + + /* Set initial results in case we exit the function early */ + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + /* Firmware v1.20 provides RC data via bulk endpoint 1 */ + status = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 1), buf, + sizeof(buf), &actlen, 50); + if (status < 0) { + /* No data available (meaning no key press) */ + return 0; + } + + if (actlen != sizeof(buf)) { + /* We didn't get back the 6 byte message we expected */ + err("Unexpected RC response size [%d]", actlen); + return -1; + } + + poll_reply.report_id = buf[0]; + poll_reply.data_state = buf[1]; + poll_reply.system_msb = buf[2]; + poll_reply.system_lsb = buf[3]; + poll_reply.data = buf[4]; + poll_reply.not_data = buf[5]; + + /* + info("rid=%02x ds=%02x sm=%02x sl=%02x d=%02x nd=%02x\n", + poll_reply.report_id, poll_reply.data_state, + poll_reply.system_msb, poll_reply.system_lsb, + poll_reply.data, poll_reply.not_data); + */ + + if ((poll_reply.data + poll_reply.not_data) != 0xff) { + /* Key failed integrity check */ + err("key failed integrity check: %02x %02x %02x %02x", + poll_reply.system_msb, poll_reply.system_lsb, + poll_reply.data, poll_reply.not_data); + return -1; + } + + /* Find the key in the map */ + for (i = 0; i < d->props.rc_key_map_size; i++) { + if (keymap[i].custom == poll_reply.system_lsb && + keymap[i].data == poll_reply.data) { + *event = keymap[i].event; + found = 1; + break; + } + } + + if (found == 0) { + err("Unknown remote controller key: %02x %02x %02x %02x", + poll_reply.system_msb, poll_reply.system_lsb, + poll_reply.data, poll_reply.not_data); + d->last_event = 0; + return 0; + } + + if (poll_reply.data_state == 1) { + /* New key hit */ + st->rc_counter = 0; + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + d->last_event = keymap[i].event; + } else if (poll_reply.data_state == 2) { + /* Key repeated */ + st->rc_counter++; + + /* prevents unwanted double hits */ + if (st->rc_counter > RC_REPEAT_DELAY_V1_20) { + *event = d->last_event; + *state = REMOTE_KEY_PRESSED; + st->rc_counter = RC_REPEAT_DELAY_V1_20; + } + } else { + err("Unknown data state [%d]", poll_reply.data_state); + } + + return 0; +} + +static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + struct dib0700_state *st = d->priv; + + /* Because some people may have improperly named firmware files, + let's figure out whether to use the new firmware call or the legacy + call based on the firmware version embedded in the file */ + if (st->rc_func_version == 0) { + u32 hwver, romver, ramver, fwtype; + int ret = dib0700_get_version(d, &hwver, &romver, &ramver, + &fwtype); + if (ret < 0) { + err("Could not determine version info"); + return -1; + } + if (ramver < 0x10200) + st->rc_func_version = 1; + else + st->rc_func_version = 2; + } + + if (st->rc_func_version == 2) + return dib0700_rc_query_v1_20(d, event, state); + else + return dib0700_rc_query_legacy(d, event, state); +} + static struct dvb_usb_rc_key dib0700_rc_keys[] = { /* Key codes for the tiny Pinnacle remote*/ { 0x07, 0x00, KEY_MUTE }, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c index 5cef12a07f72..6fe71c6745eb 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c @@ -13,14 +13,14 @@ int dvb_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, { int actlen,ret = -ENOMEM; + if (!d || wbuf == NULL || wlen == 0) + return -EINVAL; + if (d->props.generic_bulk_ctrl_endpoint == 0) { err("endpoint for generic control not specified."); return -EINVAL; } - if (wbuf == NULL || wlen == 0) - return -EINVAL; - if ((ret = mutex_lock_interruptible(&d->usb_mutex))) return ret; diff --git a/drivers/media/dvb/dvb-usb/usb-urb.c b/drivers/media/dvb/dvb-usb/usb-urb.c index 397f51a7b2ad..da93b9e982c0 100644 --- a/drivers/media/dvb/dvb-usb/usb-urb.c +++ b/drivers/media/dvb/dvb-usb/usb-urb.c @@ -135,7 +135,7 @@ stream->buf_list[stream->buf_num], (long long)stream->dma_addr[stream->buf_num]) static int usb_bulk_urb_init(struct usb_data_stream *stream) { - int i; + int i, j; if ((i = usb_allocate_stream_buffers(stream,stream->props.count, stream->props.u.bulk.buffersize)) < 0) @@ -143,9 +143,13 @@ static int usb_bulk_urb_init(struct usb_data_stream *stream) /* allocate the URBs */ for (i = 0; i < stream->props.count; i++) { - if ((stream->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC)) == NULL) + stream->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC); + if (!stream->urb_list[i]) { + deb_mem("not enough memory for urb_alloc_urb!.\n"); + for (j = 0; j < i; j++) + usb_free_urb(stream->urb_list[i]); return -ENOMEM; - + } usb_fill_bulk_urb( stream->urb_list[i], stream->udev, usb_rcvbulkpipe(stream->udev,stream->props.endpoint), stream->buf_list[i], @@ -170,9 +174,14 @@ static int usb_isoc_urb_init(struct usb_data_stream *stream) for (i = 0; i < stream->props.count; i++) { struct urb *urb; int frame_offset = 0; - if ((stream->urb_list[i] = - usb_alloc_urb(stream->props.u.isoc.framesperurb,GFP_ATOMIC)) == NULL) + + stream->urb_list[i] = usb_alloc_urb(stream->props.u.isoc.framesperurb, GFP_ATOMIC); + if (!stream->urb_list[i]) { + deb_mem("not enough memory for urb_alloc_urb!\n"); + for (j = 0; j < i; j++) + usb_free_urb(stream->urb_list[i]); return -ENOMEM; + } urb = stream->urb_list[i]; diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c index 21c1060cf10e..692b68a9e73b 100644 --- a/drivers/media/dvb/frontends/af9013.c +++ b/drivers/media/dvb/frontends/af9013.c @@ -1187,7 +1187,7 @@ static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status) if (tmp) *status |= FE_HAS_SYNC | FE_HAS_LOCK; - if (!*status & FE_HAS_SIGNAL) { + if (!(*status & FE_HAS_SIGNAL)) { /* AGC lock */ ret = af9013_read_reg_bits(state, 0xd1a0, 6, 1, &tmp); if (ret) @@ -1196,7 +1196,7 @@ static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status) *status |= FE_HAS_SIGNAL; } - if (!*status & FE_HAS_CARRIER) { + if (!(*status & FE_HAS_CARRIER)) { /* CFO lock */ ret = af9013_read_reg_bits(state, 0xd333, 7, 1, &tmp); if (ret) @@ -1205,7 +1205,7 @@ static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status) *status |= FE_HAS_CARRIER; } - if (!*status & FE_HAS_CARRIER) { + if (!(*status & FE_HAS_CARRIER)) { /* SFOE lock */ ret = af9013_read_reg_bits(state, 0xd334, 6, 1, &tmp); if (ret) diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c index 6f9b77360440..e98d6caf2c23 100644 --- a/drivers/media/dvb/siano/sms-cards.c +++ b/drivers/media/dvb/siano/sms-cards.c @@ -95,7 +95,7 @@ static struct sms_board sms_boards[] = { [SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = { .name = "Hauppauge WinTV MiniStick", .type = SMS_NOVA_B0, - .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-01.fw", + .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw", }, }; diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index 66ab0c6e9783..4a3f2b8ea37d 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -808,6 +808,12 @@ static int ttusb_alloc_iso_urbs(struct ttusb *ttusb) ISO_BUF_COUNT, &ttusb->iso_dma_handle); + if (!ttusb->iso_buffer) { + dprintk("%s: pci_alloc_consistent - not enough memory\n", + __func__); + return -ENOMEM; + } + memset(ttusb->iso_buffer, 0, ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF * ISO_BUF_COUNT); @@ -1659,7 +1665,14 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i ttusb_setup_interfaces(ttusb); - ttusb_alloc_iso_urbs(ttusb); + result = ttusb_alloc_iso_urbs(ttusb); + if (result < 0) { + dprintk("%s: ttusb_alloc_iso_urbs - failed\n", __func__); + mutex_unlock(&ttusb->semi2c); + kfree(ttusb); + return result; + } + if (ttusb_init_controller(ttusb)) printk("ttusb_init_controller: error\n"); diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index ab33fec8a19f..0aa96df80fc2 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -1157,6 +1157,12 @@ static int ttusb_dec_alloc_iso_urbs(struct ttusb_dec *dec) ISO_BUF_COUNT), &dec->iso_dma_handle); + if (!dec->iso_buffer) { + dprintk("%s: pci_alloc_consistent - not enough memory\n", + __func__); + return -ENOMEM; + } + memset(dec->iso_buffer, 0, ISO_FRAME_SIZE * (FRAMES_PER_ISO_BUF * ISO_BUF_COUNT)); @@ -1254,6 +1260,7 @@ static int ttusb_dec_init_usb(struct ttusb_dec *dec) dec->irq_buffer = usb_buffer_alloc(dec->udev,IRQ_PACKET_SIZE, GFP_ATOMIC, &dec->irq_dma_handle); if(!dec->irq_buffer) { + usb_free_urb(dec->irq_urb); return -ENOMEM; } usb_fill_int_urb(dec->irq_urb, dec->udev,dec->irq_pipe, diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 04cd7c04bdde..5189c4eb439f 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -355,6 +355,20 @@ config USB_SI470X tristate "Silicon Labs Si470x FM Radio Receiver support" depends on USB && VIDEO_V4L2 ---help--- + This is a driver for USB devices with the Silicon Labs SI470x + chip. Currently these devices are known to work: + - 10c4:818a: Silicon Labs USB FM Radio Reference Design + - 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music) + - 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700) + + Sound is provided by the ALSA USB Audio/MIDI driver. Therefore + if you don't want to use the device solely for RDS receiving, + it is recommended to also select SND_USB_AUDIO. + + Please have a look at the documentation, especially on how + to redirect the audio stream from the radio to your sound device: + Documentation/video4linux/si470x.txt + Say Y here if you want to connect this type of radio to your computer's USB port. diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index 5920cd306975..3e1830293de5 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -4,6 +4,7 @@ * Driver for USB radios for the Silicon Labs Si470x FM Radio Receivers: * - Silicon Labs USB FM Radio Reference Design * - ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF) + * - KWorld USB FM Radio SnapMusic Mobile 700 (FM700) * * Copyright (c) 2008 Tobias Lorenz <tobias.lorenz@gmx.net> * @@ -24,19 +25,6 @@ /* - * User Notes: - * - USB Audio is provided by the alsa snd_usb_audio module. - * For listing you have to redirect the sound, for example using: - * arecord -D hw:1,0 -r96000 -c2 -f S16_LE | artsdsp aplay -B - - * - regarding module parameters in /sys/module/radio_si470x/parameters: - * the contents of read-only files (0444) are not updated, even if - * space, band and de are changed using private video controls - * - increase tune_timeout, if you often get -EIO errors - * - hw_freq_seek returns -EAGAIN, when timed out or band limit is reached - */ - - -/* * History: * 2008-01-12 Tobias Lorenz <tobias.lorenz@gmx.net> * Version 1.0.0 @@ -105,6 +93,9 @@ * - afc indication * - more safety checks, let si470x_get_freq return errno * - vidioc behavior corrected according to v4l2 spec + * 2008-10-20 Alexey Klimov <klimov.linux@gmail.com> + * - add support for KWorld USB FM Radio FM700 + * - blacklisted KWorld radio in hid-core.c and hid-ids.h * * ToDo: * - add firmware download/update support @@ -145,6 +136,8 @@ static struct usb_device_id si470x_usb_driver_id_table[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x10c4, 0x818a, USB_CLASS_HID, 0, 0) }, /* ADS/Tech FM Radio Receiver (formerly Instant FM Music) */ { USB_DEVICE_AND_INTERFACE_INFO(0x06e1, 0xa155, USB_CLASS_HID, 0, 0) }, + /* KWorld USB FM Radio SnapMusic Mobile 700 (FM700) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1b80, 0xd700, USB_CLASS_HID, 0, 0) }, /* Terminating entry */ { } }; diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index a8c068e1de1c..1740b9ebdcef 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -1476,12 +1476,9 @@ static int cafe_v4l_open(struct inode *inode, struct file *filp) { struct cafe_camera *cam; - lock_kernel(); cam = cafe_find_dev(iminor(inode)); - if (cam == NULL) { - unlock_kernel(); + if (cam == NULL) return -ENODEV; - } filp->private_data = cam; mutex_lock(&cam->s_mutex); @@ -1493,7 +1490,6 @@ static int cafe_v4l_open(struct inode *inode, struct file *filp) } (cam->users)++; mutex_unlock(&cam->s_mutex); - unlock_kernel(); return 0; } diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c index bd5d9de5a008..e6ca4012b5f0 100644 --- a/drivers/media/video/compat_ioctl32.c +++ b/drivers/media/video/compat_ioctl32.c @@ -867,6 +867,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) case VIDIOC_STREAMON32: case VIDIOC_STREAMOFF32: case VIDIOC_G_PARM: + case VIDIOC_S_PARM: case VIDIOC_G_STD: case VIDIOC_S_STD: case VIDIOC_G_TUNER: @@ -885,6 +886,8 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) case VIDIOC_S_INPUT32: case VIDIOC_TRY_FMT32: case VIDIOC_S_HW_FREQ_SEEK: + case VIDIOC_ENUM_FRAMESIZES: + case VIDIOC_ENUM_FRAMEINTERVALS: ret = do_video_ioctl(file, cmd, arg); break; diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 7a1a7830a6b3..7874d9790a51 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -448,7 +448,14 @@ static int __devinit cx18_init_struct1(struct cx18 *cx) mutex_init(&cx->gpio_lock); spin_lock_init(&cx->lock); - spin_lock_init(&cx->dma_reg_lock); + + cx->work_queue = create_singlethread_workqueue(cx->name); + if (cx->work_queue == NULL) { + CX18_ERR("Could not create work queue\n"); + return -1; + } + + INIT_WORK(&cx->work, cx18_work_handler); /* start counting open_id at 1 */ cx->open_id = 1; @@ -581,10 +588,10 @@ static void cx18_load_and_init_modules(struct cx18 *cx) #ifdef MODULE /* load modules */ -#ifndef CONFIG_MEDIA_TUNER +#ifdef CONFIG_MEDIA_TUNER_MODULE hw = cx18_request_module(cx, hw, "tuner", CX18_HW_TUNER); #endif -#ifndef CONFIG_VIDEO_CS5345 +#ifdef CONFIG_VIDEO_CS5345_MODULE hw = cx18_request_module(cx, hw, "cs5345", CX18_HW_CS5345); #endif #endif @@ -832,6 +839,7 @@ free_map: free_mem: release_mem_region(cx->base_addr, CX18_MEM_SIZE); free_workqueue: + destroy_workqueue(cx->work_queue); err: if (retval == 0) retval = -ENODEV; @@ -932,6 +940,9 @@ static void cx18_remove(struct pci_dev *pci_dev) cx18_halt_firmware(cx); + flush_workqueue(cx->work_queue); + destroy_workqueue(cx->work_queue); + cx18_streams_cleanup(cx, 1); exit_cx18_i2c(cx); diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index a4b1708fafe7..bbdd5f25041d 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -199,12 +199,15 @@ struct cx18_options { #define CX18_F_S_APPL_IO 8 /* this stream is used read/written by an application */ /* per-cx18, i_flags */ -#define CX18_F_I_LOADED_FW 0 /* Loaded the firmware the first time */ -#define CX18_F_I_EOS 4 /* End of encoder stream reached */ -#define CX18_F_I_RADIO_USER 5 /* The radio tuner is selected */ -#define CX18_F_I_ENC_PAUSED 13 /* the encoder is paused */ -#define CX18_F_I_INITED 21 /* set after first open */ -#define CX18_F_I_FAILED 22 /* set if first open failed */ +#define CX18_F_I_LOADED_FW 0 /* Loaded firmware 1st time */ +#define CX18_F_I_EOS 4 /* End of encoder stream */ +#define CX18_F_I_RADIO_USER 5 /* radio tuner is selected */ +#define CX18_F_I_ENC_PAUSED 13 /* the encoder is paused */ +#define CX18_F_I_HAVE_WORK 15 /* there is work to be done */ +#define CX18_F_I_WORK_HANDLER_DVB 18 /* work to be done for DVB */ +#define CX18_F_I_INITED 21 /* set after first open */ +#define CX18_F_I_FAILED 22 /* set if first open failed */ +#define CX18_F_I_WORK_INITED 23 /* worker thread initialized */ /* These are the VBI types as they appear in the embedded VBI private packets. */ #define CX18_SLICED_TYPE_TELETEXT_B (1) @@ -402,8 +405,6 @@ struct cx18 { spinlock_t lock; /* lock access to this struct */ int search_pack_header; - spinlock_t dma_reg_lock; /* lock access to DMA engine registers */ - int open_id; /* incremented each time an open occurs, used as unique ID. Starts at 1, so 0 can be used as uninitialized value in the stream->id. */ @@ -433,6 +434,9 @@ struct cx18 { /* when the current DMA is finished this queue is woken up */ wait_queue_head_t dma_waitq; + struct workqueue_struct *work_queue; + struct work_struct work; + /* i2c */ struct i2c_adapter i2c_adap[2]; struct i2c_algo_bit_data i2c_algo[2]; diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c index afc694e7bdb2..4542e2e5e3d7 100644 --- a/drivers/media/video/cx18/cx18-dvb.c +++ b/drivers/media/video/cx18/cx18-dvb.c @@ -23,6 +23,8 @@ #include "cx18-dvb.h" #include "cx18-io.h" #include "cx18-streams.h" +#include "cx18-queue.h" +#include "cx18-scb.h" #include "cx18-cards.h" #include "s5h1409.h" #include "mxl5005s.h" @@ -300,3 +302,24 @@ static int dvb_register(struct cx18_stream *stream) return ret; } + +void cx18_dvb_work_handler(struct cx18 *cx) +{ + struct cx18_buffer *buf; + struct cx18_stream *s = &cx->streams[CX18_ENC_STREAM_TYPE_TS]; + + while ((buf = cx18_dequeue(s, &s->q_full)) != NULL) { + if (s->dvb.enabled) + dvb_dmx_swfilter(&s->dvb.demux, buf->buf, + buf->bytesused); + + cx18_enqueue(s, buf, &s->q_free); + cx18_buf_sync_for_device(s, buf); + if (s->handle == CX18_INVALID_TASK_HANDLE) /* FIXME: improve */ + continue; + + cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, + (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, + 1, buf->id, s->buf_size); + } +} diff --git a/drivers/media/video/cx18/cx18-dvb.h b/drivers/media/video/cx18/cx18-dvb.h index bf8d8f6f5455..bbdcefc87f28 100644 --- a/drivers/media/video/cx18/cx18-dvb.h +++ b/drivers/media/video/cx18/cx18-dvb.h @@ -23,3 +23,4 @@ int cx18_dvb_register(struct cx18_stream *stream); void cx18_dvb_unregister(struct cx18_stream *stream); +void cx18_dvb_work_handler(struct cx18 *cx); diff --git a/drivers/media/video/cx18/cx18-io.c b/drivers/media/video/cx18/cx18-io.c index 700ab9439c16..220fae8d4ad7 100644 --- a/drivers/media/video/cx18/cx18-io.c +++ b/drivers/media/video/cx18/cx18-io.c @@ -88,6 +88,19 @@ void cx18_writel_retry(struct cx18 *cx, u32 val, void __iomem *addr) cx18_log_write_retries(cx, i, addr); } +void _cx18_writel_expect(struct cx18 *cx, u32 val, void __iomem *addr, + u32 eval, u32 mask) +{ + int i; + eval &= mask; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + cx18_writel_noretry(cx, val, addr); + if (eval == (cx18_readl_noretry(cx, addr) & mask)) + break; + } + cx18_log_write_retries(cx, i, addr); +} + void cx18_writew_retry(struct cx18 *cx, u16 val, void __iomem *addr) { int i; @@ -218,7 +231,7 @@ void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count) void cx18_sw1_irq_enable(struct cx18 *cx, u32 val) { u32 r; - cx18_write_reg(cx, val, SW1_INT_STATUS); + cx18_write_reg_expect(cx, val, SW1_INT_STATUS, ~val, val); r = cx18_read_reg(cx, SW1_INT_ENABLE_PCI); cx18_write_reg(cx, r | val, SW1_INT_ENABLE_PCI); } @@ -233,7 +246,7 @@ void cx18_sw1_irq_disable(struct cx18 *cx, u32 val) void cx18_sw2_irq_enable(struct cx18 *cx, u32 val) { u32 r; - cx18_write_reg(cx, val, SW2_INT_STATUS); + cx18_write_reg_expect(cx, val, SW2_INT_STATUS, ~val, val); r = cx18_read_reg(cx, SW2_INT_ENABLE_PCI); cx18_write_reg(cx, r | val, SW2_INT_ENABLE_PCI); } diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/video/cx18/cx18-io.h index 287a5e8bf67b..425244453ea7 100644 --- a/drivers/media/video/cx18/cx18-io.h +++ b/drivers/media/video/cx18/cx18-io.h @@ -133,6 +133,8 @@ static inline void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr) cx18_writel_noretry(cx, val, addr); } +void _cx18_writel_expect(struct cx18 *cx, u32 val, void __iomem *addr, + u32 eval, u32 mask); static inline void cx18_writew_noretry(struct cx18 *cx, u16 val, void __iomem *addr) @@ -271,6 +273,21 @@ static inline void cx18_write_reg(struct cx18 *cx, u32 val, u32 reg) cx18_write_reg_noretry(cx, val, reg); } +static inline void _cx18_write_reg_expect(struct cx18 *cx, u32 val, u32 reg, + u32 eval, u32 mask) +{ + _cx18_writel_expect(cx, val, cx->reg_mem + reg, eval, mask); +} + +static inline void cx18_write_reg_expect(struct cx18 *cx, u32 val, u32 reg, + u32 eval, u32 mask) +{ + if (cx18_retry_mmio) + _cx18_write_reg_expect(cx, val, reg, eval, mask); + else + cx18_write_reg_noretry(cx, val, reg); +} + static inline u32 cx18_read_reg_noretry(struct cx18 *cx, u32 reg) { diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index 360330f5463f..5fbfbd0f1493 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -29,8 +29,20 @@ #include "cx18-mailbox.h" #include "cx18-vbi.h" #include "cx18-scb.h" +#include "cx18-dvb.h" -#define DMA_MAGIC_COOKIE 0x000001fe +void cx18_work_handler(struct work_struct *work) +{ + struct cx18 *cx = container_of(work, struct cx18, work); + if (test_and_clear_bit(CX18_F_I_WORK_INITED, &cx->i_flags)) { + struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 }; + /* This thread must use the FIFO scheduler as it + * is realtime sensitive. */ + sched_setscheduler(current, SCHED_FIFO, ¶m); + } + if (test_and_clear_bit(CX18_F_I_WORK_HANDLER_DVB, &cx->i_flags)) + cx18_dvb_work_handler(cx); +} static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) { @@ -67,17 +79,11 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) if (buf) { cx18_buf_sync_for_cpu(s, buf); if (s->type == CX18_ENC_STREAM_TYPE_TS && s->dvb.enabled) { - /* process the buffer here */ - CX18_DEBUG_HI_DMA("TS recv and sent bytesused=%d\n", - buf->bytesused); - - dvb_dmx_swfilter(&s->dvb.demux, buf->buf, + CX18_DEBUG_HI_DMA("TS recv bytesused = %d\n", buf->bytesused); - cx18_buf_sync_for_device(s, buf); - cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, - (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, - 1, buf->id, s->buf_size); + set_bit(CX18_F_I_WORK_HANDLER_DVB, &cx->i_flags); + set_bit(CX18_F_I_HAVE_WORK, &cx->i_flags); } else set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags); } else { @@ -109,7 +115,7 @@ static void epu_debug(struct cx18 *cx, struct cx18_mailbox *mb) CX18_INFO("FW version: %s\n", p - 1); } -static void hpu_cmd(struct cx18 *cx, u32 sw1) +static void epu_cmd(struct cx18 *cx, u32 sw1) { struct cx18_mailbox mb; @@ -125,12 +131,31 @@ static void hpu_cmd(struct cx18 *cx, u32 sw1) epu_debug(cx, &mb); break; default: - CX18_WARN("Unexpected mailbox command %08x\n", mb.cmd); + CX18_WARN("Unknown CPU_TO_EPU mailbox command %#08x\n", + mb.cmd); break; } } - if (sw1 & (IRQ_APU_TO_EPU | IRQ_HPU_TO_EPU)) - CX18_WARN("Unexpected interrupt %08x\n", sw1); + + if (sw1 & IRQ_APU_TO_EPU) { + cx18_memcpy_fromio(cx, &mb, &cx->scb->apu2epu_mb, sizeof(mb)); + CX18_WARN("Unknown APU_TO_EPU mailbox command %#08x\n", mb.cmd); + } + + if (sw1 & IRQ_HPU_TO_EPU) { + cx18_memcpy_fromio(cx, &mb, &cx->scb->hpu2epu_mb, sizeof(mb)); + CX18_WARN("Unknown HPU_TO_EPU mailbox command %#08x\n", mb.cmd); + } +} + +static void xpu_ack(struct cx18 *cx, u32 sw2) +{ + if (sw2 & IRQ_CPU_TO_EPU_ACK) + wake_up(&cx->mb_cpu_waitq); + if (sw2 & IRQ_APU_TO_EPU_ACK) + wake_up(&cx->mb_apu_waitq); + if (sw2 & IRQ_HPU_TO_EPU_ACK) + wake_up(&cx->mb_hpu_waitq); } irqreturn_t cx18_irq_handler(int irq, void *dev_id) @@ -140,43 +165,36 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) u32 sw2, sw2_mask; u32 hw2, hw2_mask; - spin_lock(&cx->dma_reg_lock); - + sw1_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI); + sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & sw1_mask; + sw2_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI); + sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & sw2_mask; hw2_mask = cx18_read_reg(cx, HW2_INT_MASK5_PCI); hw2 = cx18_read_reg(cx, HW2_INT_CLR_STATUS) & hw2_mask; - sw2_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU_ACK; - sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & sw2_mask; - sw1_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU; - sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & sw1_mask; - cx18_write_reg(cx, sw2&sw2_mask, SW2_INT_STATUS); - cx18_write_reg(cx, sw1&sw1_mask, SW1_INT_STATUS); - cx18_write_reg(cx, hw2&hw2_mask, HW2_INT_CLR_STATUS); + if (sw1) + cx18_write_reg_expect(cx, sw1, SW1_INT_STATUS, ~sw1, sw1); + if (sw2) + cx18_write_reg_expect(cx, sw2, SW2_INT_STATUS, ~sw2, sw2); + if (hw2) + cx18_write_reg_expect(cx, hw2, HW2_INT_CLR_STATUS, ~hw2, hw2); if (sw1 || sw2 || hw2) CX18_DEBUG_HI_IRQ("SW1: %x SW2: %x HW2: %x\n", sw1, sw2, hw2); /* To do: interrupt-based I2C handling - if (hw2 & 0x00c00000) { + if (hw2 & (HW2_I2C1_INT|HW2_I2C2_INT)) { } */ - if (sw2) { - if (sw2 & (cx18_readl(cx, &cx->scb->cpu2hpu_irq_ack) | - cx18_readl(cx, &cx->scb->cpu2epu_irq_ack))) - wake_up(&cx->mb_cpu_waitq); - if (sw2 & (cx18_readl(cx, &cx->scb->apu2hpu_irq_ack) | - cx18_readl(cx, &cx->scb->apu2epu_irq_ack))) - wake_up(&cx->mb_apu_waitq); - if (sw2 & cx18_readl(cx, &cx->scb->epu2hpu_irq_ack)) - wake_up(&cx->mb_epu_waitq); - if (sw2 & cx18_readl(cx, &cx->scb->hpu2epu_irq_ack)) - wake_up(&cx->mb_hpu_waitq); - } + if (sw2) + xpu_ack(cx, sw2); if (sw1) - hpu_cmd(cx, sw1); - spin_unlock(&cx->dma_reg_lock); + epu_cmd(cx, sw1); + + if (test_and_clear_bit(CX18_F_I_HAVE_WORK, &cx->i_flags)) + queue_work(cx->work_queue, &cx->work); - return (hw2 | sw1 | sw2) ? IRQ_HANDLED : IRQ_NONE; + return (sw1 || sw2 || hw2) ? IRQ_HANDLED : IRQ_NONE; } diff --git a/drivers/media/video/cx18/cx18-irq.h b/drivers/media/video/cx18/cx18-irq.h index 379f704f5cba..6173ca3bc9e4 100644 --- a/drivers/media/video/cx18/cx18-irq.h +++ b/drivers/media/video/cx18/cx18-irq.h @@ -32,6 +32,4 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id); -void cx18_irq_work_handler(struct work_struct *work); -void cx18_dma_stream_dec_prepare(struct cx18_stream *s, u32 offset, int lock); -void cx18_unfinished_dma(unsigned long arg); +void cx18_work_handler(struct work_struct *work); diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c index 9d18dd22de76..acff7dfb60df 100644 --- a/drivers/media/video/cx18/cx18-mailbox.c +++ b/drivers/media/video/cx18/cx18-mailbox.c @@ -83,7 +83,7 @@ static const struct cx18_api_info api_info[] = { API_ENTRY(CPU, CX18_CPU_DE_SET_MDL_ACK, 0), API_ENTRY(CPU, CX18_CPU_DE_SET_MDL, API_FAST), API_ENTRY(CPU, CX18_APU_RESETAI, API_FAST), - API_ENTRY(CPU, CX18_CPU_DE_RELEASE_MDL, 0), + API_ENTRY(CPU, CX18_CPU_DE_RELEASE_MDL, API_SLOW), API_ENTRY(0, 0, 0), }; @@ -176,7 +176,7 @@ long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb) cx18_setup_page(cx, SCB_OFFSET); cx18_write_sync(cx, mb->request, &ack_mb->ack); - cx18_write_reg(cx, ack_irq, SW2_INT_SET); + cx18_write_reg_expect(cx, ack_irq, SW2_INT_SET, ack_irq, ack_irq); return 0; } @@ -225,7 +225,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) } if (info->flags & API_FAST) timeout /= 2; - cx18_write_reg(cx, irq, SW1_INT_SET); + cx18_write_reg_expect(cx, irq, SW1_INT_SET, irq, irq); while (!sig && cx18_readl(cx, &mb->ack) != cx18_readl(cx, &mb->request) && cnt < 660) { diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c index a33ba04a2686..174682c2582f 100644 --- a/drivers/media/video/cx18/cx18-queue.c +++ b/drivers/media/video/cx18/cx18-queue.c @@ -88,15 +88,13 @@ struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id, if (buf->id != id) continue; + buf->bytesused = bytesused; - /* the transport buffers are handled differently, - they are not moved to the full queue */ - if (s->type != CX18_ENC_STREAM_TYPE_TS) { - atomic_dec(&s->q_free.buffers); - atomic_inc(&s->q_full.buffers); - s->q_full.bytesused += buf->bytesused; - list_move_tail(&buf->list, &s->q_full.list); - } + atomic_dec(&s->q_free.buffers); + atomic_inc(&s->q_full.buffers); + s->q_full.bytesused += buf->bytesused; + list_move_tail(&buf->list, &s->q_full.list); + spin_unlock(&s->qlock); return buf; } diff --git a/drivers/media/video/cx18/cx18-scb.h b/drivers/media/video/cx18/cx18-scb.h index 86b4cb15d163..594713bbed68 100644 --- a/drivers/media/video/cx18/cx18-scb.h +++ b/drivers/media/video/cx18/cx18-scb.h @@ -128,22 +128,22 @@ struct cx18_scb { u32 apu2cpu_irq; /* Value to write to register SW2 register set (0xC7003140) after the command is cleared */ - u32 apu2cpu_irq_ack; + u32 cpu2apu_irq_ack; u32 reserved2[13]; u32 hpu2cpu_mb_offset; u32 hpu2cpu_irq; - u32 hpu2cpu_irq_ack; + u32 cpu2hpu_irq_ack; u32 reserved3[13]; u32 ppu2cpu_mb_offset; u32 ppu2cpu_irq; - u32 ppu2cpu_irq_ack; + u32 cpu2ppu_irq_ack; u32 reserved4[13]; u32 epu2cpu_mb_offset; u32 epu2cpu_irq; - u32 epu2cpu_irq_ack; + u32 cpu2epu_irq_ack; u32 reserved5[13]; u32 reserved6[8]; @@ -153,22 +153,22 @@ struct cx18_scb { u32 reserved11[7]; u32 cpu2apu_mb_offset; u32 cpu2apu_irq; - u32 cpu2apu_irq_ack; + u32 apu2cpu_irq_ack; u32 reserved12[13]; u32 hpu2apu_mb_offset; u32 hpu2apu_irq; - u32 hpu2apu_irq_ack; + u32 apu2hpu_irq_ack; u32 reserved13[13]; u32 ppu2apu_mb_offset; u32 ppu2apu_irq; - u32 ppu2apu_irq_ack; + u32 apu2ppu_irq_ack; u32 reserved14[13]; u32 epu2apu_mb_offset; u32 epu2apu_irq; - u32 epu2apu_irq_ack; + u32 apu2epu_irq_ack; u32 reserved15[13]; u32 reserved16[8]; @@ -178,22 +178,22 @@ struct cx18_scb { u32 reserved21[7]; u32 cpu2hpu_mb_offset; u32 cpu2hpu_irq; - u32 cpu2hpu_irq_ack; + u32 hpu2cpu_irq_ack; u32 reserved22[13]; u32 apu2hpu_mb_offset; u32 apu2hpu_irq; - u32 apu2hpu_irq_ack; + u32 hpu2apu_irq_ack; u32 reserved23[13]; u32 ppu2hpu_mb_offset; u32 ppu2hpu_irq; - u32 ppu2hpu_irq_ack; + u32 hpu2ppu_irq_ack; u32 reserved24[13]; u32 epu2hpu_mb_offset; u32 epu2hpu_irq; - u32 epu2hpu_irq_ack; + u32 hpu2epu_irq_ack; u32 reserved25[13]; u32 reserved26[8]; @@ -203,22 +203,22 @@ struct cx18_scb { u32 reserved31[7]; u32 cpu2ppu_mb_offset; u32 cpu2ppu_irq; - u32 cpu2ppu_irq_ack; + u32 ppu2cpu_irq_ack; u32 reserved32[13]; u32 apu2ppu_mb_offset; u32 apu2ppu_irq; - u32 apu2ppu_irq_ack; + u32 ppu2apu_irq_ack; u32 reserved33[13]; u32 hpu2ppu_mb_offset; u32 hpu2ppu_irq; - u32 hpu2ppu_irq_ack; + u32 ppu2hpu_irq_ack; u32 reserved34[13]; u32 epu2ppu_mb_offset; u32 epu2ppu_irq; - u32 epu2ppu_irq_ack; + u32 ppu2epu_irq_ack; u32 reserved35[13]; u32 reserved36[8]; @@ -228,22 +228,22 @@ struct cx18_scb { u32 reserved41[7]; u32 cpu2epu_mb_offset; u32 cpu2epu_irq; - u32 cpu2epu_irq_ack; + u32 epu2cpu_irq_ack; u32 reserved42[13]; u32 apu2epu_mb_offset; u32 apu2epu_irq; - u32 apu2epu_irq_ack; + u32 epu2apu_irq_ack; u32 reserved43[13]; u32 hpu2epu_mb_offset; u32 hpu2epu_irq; - u32 hpu2epu_irq_ack; + u32 epu2hpu_irq_ack; u32 reserved44[13]; u32 ppu2epu_mb_offset; u32 ppu2epu_irq; - u32 ppu2epu_irq_ack; + u32 epu2ppu_irq_ack; u32 reserved45[13]; u32 reserved46[8]; diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index 078be6319556..d3ae5b4dfca7 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -1078,7 +1078,7 @@ static int mpeg_open(struct inode *inode, struct file *file) } } - if (blackbird_initialize_codec(dev) < 0) { + if (!atomic_read(&dev->core->mpeg_users) && blackbird_initialize_codec(dev) < 0) { if (drv) drv->request_release(drv); unlock_kernel(); @@ -1109,6 +1109,8 @@ static int mpeg_open(struct inode *inode, struct file *file) fh->mpegq.field); unlock_kernel(); + atomic_inc(&dev->core->mpeg_users); + return 0; } @@ -1118,7 +1120,7 @@ static int mpeg_release(struct inode *inode, struct file *file) struct cx8802_dev *dev = fh->dev; struct cx8802_driver *drv = NULL; - if (dev->mpeg_active) + if (dev->mpeg_active && atomic_read(&dev->core->mpeg_users) == 1) blackbird_stop_codec(dev); cx8802_cancel_buffers(fh->dev); @@ -1138,6 +1140,8 @@ static int mpeg_release(struct inode *inode, struct file *file) if (drv) drv->request_release(drv); + atomic_dec(&dev->core->mpeg_users); + return 0; } @@ -1158,6 +1162,10 @@ static unsigned int mpeg_poll(struct file *file, struct poll_table_struct *wait) { struct cx8802_fh *fh = file->private_data; + struct cx8802_dev *dev = fh->dev; + + if (!dev->mpeg_active) + blackbird_start_codec(file, fh); return videobuf_poll_stream(file, &fh->mpegq, wait); } diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index cf6c30d4e545..309ca5e68063 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -598,6 +598,11 @@ static int dvb_register(struct cx8802_dev *dev) struct videobuf_dvb_frontend *fe0, *fe1 = NULL; int mfe_shared = 0; /* bus not shared by default */ + if (0 != core->i2c_rc) { + printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name); + goto frontend_detach; + } + /* Get the first frontend */ fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); if (!fe0) diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c index a1c435b4b1cd..3ebdcd1d83f8 100644 --- a/drivers/media/video/cx88/cx88-mpeg.c +++ b/drivers/media/video/cx88/cx88-mpeg.c @@ -769,10 +769,6 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, struct cx8802_dev *dev; struct cx88_core *core; int err; -#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE) - struct videobuf_dvb_frontend *demod; - int i; -#endif /* general setup */ core = cx88_core_get(pci_dev); @@ -803,15 +799,21 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, mutex_init(&dev->frontends.lock); INIT_LIST_HEAD(&dev->frontends.felist); - if (core->board.num_frontends) - printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, core->board.num_frontends); - - for (i = 1; i <= core->board.num_frontends; i++) { - demod = videobuf_dvb_alloc_frontend(&dev->frontends, i); - if(demod == NULL) { - printk(KERN_ERR "%s() failed to alloc\n", __func__); - err = -ENOMEM; - goto fail_free; + if (core->board.num_frontends) { + struct videobuf_dvb_frontend *fe; + int i; + + printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, + core->board.num_frontends); + for (i = 1; i <= core->board.num_frontends; i++) { + fe = videobuf_dvb_alloc_frontend(&dev->frontends, i); + if(fe == NULL) { + printk(KERN_ERR "%s() failed to alloc\n", + __func__); + videobuf_dvb_dealloc_frontends(&dev->frontends); + err = -ENOMEM; + goto fail_free; + } } } #endif diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 61265fd04d56..b96ce991d968 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -1216,8 +1216,12 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) struct cx8800_fh *fh = priv; struct cx8800_dev *dev = fh->dev; - if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)) + /* We should remember that this driver also supports teletext, */ + /* so we have to test if the v4l2_buf_type is VBI capture data. */ + if (unlikely((fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (fh->type != V4L2_BUF_TYPE_VBI_CAPTURE))) return -EINVAL; + if (unlikely(i != fh->type)) return -EINVAL; @@ -1232,8 +1236,10 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) struct cx8800_dev *dev = fh->dev; int err, res; - if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + if ((fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (fh->type != V4L2_BUF_TYPE_VBI_CAPTURE)) return -EINVAL; + if (i != fh->type) return -EINVAL; diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 76207c2856b7..f4240965be32 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -352,6 +352,7 @@ struct cx88_core { /* various v4l controls */ u32 freq; atomic_t users; + atomic_t mpeg_users; /* cx88-video needs to access cx8802 for hybrid tuner pll access. */ struct cx8802_dev *dvbdev; diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index ac3292d7646c..7a8d49ef646e 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -62,7 +62,7 @@ static int em28xx_isoc_audio_deinit(struct em28xx *dev) dprintk("Stopping isoc\n"); for (i = 0; i < EM28XX_AUDIO_BUFS; i++) { - usb_kill_urb(dev->adev->urb[i]); + usb_unlink_urb(dev->adev->urb[i]); usb_free_urb(dev->adev->urb[i]); dev->adev->urb[i] = NULL; } @@ -75,7 +75,6 @@ static void em28xx_audio_isocirq(struct urb *urb) struct em28xx *dev = urb->context; int i; unsigned int oldptr; - unsigned long flags; int period_elapsed = 0; int status; unsigned char *cp; @@ -96,9 +95,21 @@ static void em28xx_audio_isocirq(struct urb *urb) if (!length) continue; - spin_lock_irqsave(&dev->adev->slock, flags); - oldptr = dev->adev->hwptr_done_capture; + if (oldptr + length >= runtime->buffer_size) { + unsigned int cnt = + runtime->buffer_size - oldptr; + memcpy(runtime->dma_area + oldptr * stride, cp, + cnt * stride); + memcpy(runtime->dma_area, cp + cnt * stride, + length * stride - cnt * stride); + } else { + memcpy(runtime->dma_area + oldptr * stride, cp, + length * stride); + } + + snd_pcm_stream_lock(substream); + dev->adev->hwptr_done_capture += length; if (dev->adev->hwptr_done_capture >= runtime->buffer_size) @@ -113,19 +124,7 @@ static void em28xx_audio_isocirq(struct urb *urb) period_elapsed = 1; } - spin_unlock_irqrestore(&dev->adev->slock, flags); - - if (oldptr + length >= runtime->buffer_size) { - unsigned int cnt = - runtime->buffer_size - oldptr; - memcpy(runtime->dma_area + oldptr * stride, cp, - cnt * stride); - memcpy(runtime->dma_area, cp + cnt * stride, - length * stride - cnt * stride); - } else { - memcpy(runtime->dma_area + oldptr * stride, cp, - length * stride); - } + snd_pcm_stream_unlock(substream); } if (period_elapsed) snd_pcm_period_elapsed(substream); diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index 5d837c16ee22..15e2b525310d 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -69,19 +69,33 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg, int ret, byte; if (dev->state & DEV_DISCONNECTED) - return(-ENODEV); + return -ENODEV; + + if (len > URB_MAX_CTRL_SIZE) + return -EINVAL; em28xx_regdbg("req=%02x, reg=%02x ", req, reg); + mutex_lock(&dev->ctrl_urb_lock); ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0x0000, reg, buf, len, HZ); + 0x0000, reg, dev->urb_buf, len, HZ); + if (ret < 0) { + if (reg_debug) + printk(" failed!\n"); + mutex_unlock(&dev->ctrl_urb_lock); + return ret; + } + + if (len) + memcpy(buf, dev->urb_buf, len); + + mutex_unlock(&dev->ctrl_urb_lock); if (reg_debug) { - printk(ret < 0 ? " failed!\n" : "%02x values: ", ret); + printk("%02x values: ", ret); for (byte = 0; byte < len; byte++) printk(" %02x", (unsigned char)buf[byte]); - printk("\n"); } @@ -102,16 +116,20 @@ int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg) em28xx_regdbg("req=%02x, reg=%02x:", req, reg); + mutex_lock(&dev->ctrl_urb_lock); ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0x0000, reg, &val, 1, HZ); - - if (reg_debug) - printk(ret < 0 ? " failed!\n" : - "%02x\n", (unsigned char) val); + 0x0000, reg, dev->urb_buf, 1, HZ); + val = dev->urb_buf[0]; + mutex_unlock(&dev->ctrl_urb_lock); - if (ret < 0) + if (ret < 0) { + printk(" failed!\n"); return ret; + } + + if (reg_debug) + printk("%02x\n", (unsigned char) val); return val; } @@ -130,19 +148,13 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf, { int ret; - /*usb_control_msg seems to expect a kmalloced buffer */ - unsigned char *bufs; - if (dev->state & DEV_DISCONNECTED) return -ENODEV; - if (len < 1) + if ((len < 1) || (len > URB_MAX_CTRL_SIZE)) return -EINVAL; - bufs = kmalloc(len, GFP_KERNEL); - em28xx_regdbg("req=%02x reg=%02x:", req, reg); - if (reg_debug) { int i; for (i = 0; i < len; ++i) @@ -150,16 +162,16 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf, printk("\n"); } - if (!bufs) - return -ENOMEM; - memcpy(bufs, buf, len); + mutex_lock(&dev->ctrl_urb_lock); + memcpy(dev->urb_buf, buf, len); ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0x0000, reg, bufs, len, HZ); + 0x0000, reg, dev->urb_buf, len, HZ); + mutex_unlock(&dev->ctrl_urb_lock); + if (dev->wait_after_write) msleep(dev->wait_after_write); - kfree(bufs); return ret; } @@ -270,6 +282,8 @@ static int em28xx_set_audio_source(struct em28xx *dev) break; case EM28XX_AMUX_LINE_IN: input = EM28XX_AUDIO_SRC_LINE; + video = disable; + line = enable; break; case EM28XX_AMUX_AC97_VIDEO: input = EM28XX_AUDIO_SRC_LINE; diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c index 3bab56b997fc..2360c61ddca9 100644 --- a/drivers/media/video/em28xx/em28xx-i2c.c +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -337,9 +337,9 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len) /* Check if board has eeprom */ err = i2c_master_recv(&dev->i2c_client, &buf, 0); if (err < 0) { - em28xx_errdev("%s: i2c_master_recv failed! err [%d]\n", - __func__, err); - return err; + em28xx_errdev("board has no eeprom\n"); + memset(eedata, 0, len); + return -ENODEV; } buf = 0; @@ -609,14 +609,16 @@ int em28xx_i2c_register(struct em28xx *dev) dev->i2c_client.adapter = &dev->i2c_adap; retval = em28xx_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata)); - if (retval < 0) { + if ((retval < 0) && (retval != -ENODEV)) { em28xx_errdev("%s: em28xx_i2_eeprom failed! retval [%d]\n", __func__, retval); + return retval; } if (i2c_scan) em28xx_do_i2c_scan(dev); + return 0; } diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index a1ab2ef45578..610f535a257c 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -73,6 +73,7 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); static LIST_HEAD(em28xx_devlist); +static DEFINE_MUTEX(em28xx_devlist_mutex); static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; static unsigned int video_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; @@ -1519,7 +1520,7 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) struct em28xx_fh *fh; enum v4l2_buf_type fh_type = 0; - lock_kernel(); + mutex_lock(&em28xx_devlist_mutex); list_for_each_entry(h, &em28xx_devlist, devlist) { if (h->vdev->minor == minor) { dev = h; @@ -1535,10 +1536,11 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) dev = h; } } - if (NULL == dev) { - unlock_kernel(); + mutex_unlock(&em28xx_devlist_mutex); + if (NULL == dev) return -ENODEV; - } + + mutex_lock(&dev->lock); em28xx_videodbg("open minor=%d type=%s users=%d\n", minor, v4l2_type_names[fh_type], dev->users); @@ -1547,10 +1549,9 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) fh = kzalloc(sizeof(struct em28xx_fh), GFP_KERNEL); if (!fh) { em28xx_errdev("em28xx-video.c: Out of memory?!\n"); - unlock_kernel(); + mutex_unlock(&dev->lock); return -ENOMEM; } - mutex_lock(&dev->lock); fh->dev = dev; fh->radio = radio; fh->type = fh_type; @@ -1584,7 +1585,6 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) sizeof(struct em28xx_buffer), fh); mutex_unlock(&dev->lock); - unlock_kernel(); return errCode; } @@ -1871,6 +1871,7 @@ int em28xx_register_extension(struct em28xx_ops *ops) { struct em28xx *dev = NULL; + mutex_lock(&em28xx_devlist_mutex); mutex_lock(&em28xx_extension_devlist_lock); list_add_tail(&ops->next, &em28xx_extension_devlist); list_for_each_entry(dev, &em28xx_devlist, devlist) { @@ -1879,6 +1880,7 @@ int em28xx_register_extension(struct em28xx_ops *ops) } printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name); mutex_unlock(&em28xx_extension_devlist_lock); + mutex_unlock(&em28xx_devlist_mutex); return 0; } EXPORT_SYMBOL(em28xx_register_extension); @@ -1887,6 +1889,7 @@ void em28xx_unregister_extension(struct em28xx_ops *ops) { struct em28xx *dev = NULL; + mutex_lock(&em28xx_devlist_mutex); list_for_each_entry(dev, &em28xx_devlist, devlist) { if (dev) ops->fini(dev); @@ -1896,6 +1899,7 @@ void em28xx_unregister_extension(struct em28xx_ops *ops) printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name); list_del(&ops->next); mutex_unlock(&em28xx_extension_devlist_lock); + mutex_unlock(&em28xx_devlist_mutex); } EXPORT_SYMBOL(em28xx_unregister_extension); @@ -1921,6 +1925,60 @@ static struct video_device *em28xx_vdev_init(struct em28xx *dev, } +static int register_analog_devices(struct em28xx *dev) +{ + int ret; + + /* allocate and fill video video_device struct */ + dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video"); + if (!dev->vdev) { + em28xx_errdev("cannot allocate video_device.\n"); + return -ENODEV; + } + + /* register v4l2 video video_device */ + ret = video_register_device(dev->vdev, VFL_TYPE_GRABBER, + video_nr[dev->devno]); + if (ret) { + em28xx_errdev("unable to register video device (error=%i).\n", + ret); + return ret; + } + + /* Allocate and fill vbi video_device struct */ + dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi"); + + /* register v4l2 vbi video_device */ + ret = video_register_device(dev->vbi_dev, VFL_TYPE_VBI, + vbi_nr[dev->devno]); + if (ret < 0) { + em28xx_errdev("unable to register vbi device\n"); + return ret; + } + + if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) { + dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio"); + if (!dev->radio_dev) { + em28xx_errdev("cannot allocate video_device.\n"); + return -ENODEV; + } + ret = video_register_device(dev->radio_dev, VFL_TYPE_RADIO, + radio_nr[dev->devno]); + if (ret < 0) { + em28xx_errdev("can't register radio device\n"); + return ret; + } + em28xx_info("Registered radio device as /dev/radio%d\n", + dev->radio_dev->num); + } + + em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n", + dev->vdev->num, dev->vbi_dev->num); + + return 0; +} + + /* * em28xx_init_dev() * allocates and inits the device structs, registers i2c bus and v4l device @@ -1936,6 +1994,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->udev = udev; mutex_init(&dev->lock); + mutex_init(&dev->ctrl_urb_lock); spin_lock_init(&dev->slock); init_waitqueue_head(&dev->open); init_waitqueue_head(&dev->wait_frame); @@ -1953,8 +2012,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, errCode = em28xx_config(dev); if (errCode) { em28xx_errdev("error configuring device\n"); - em28xx_devused &= ~(1<<dev->devno); - kfree(dev); return -ENOMEM; } @@ -2001,50 +2058,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, return errCode; } - list_add_tail(&dev->devlist, &em28xx_devlist); - - /* allocate and fill video video_device struct */ - dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video"); - if (NULL == dev->vdev) { - em28xx_errdev("cannot allocate video_device.\n"); - goto fail_unreg; - } - - /* register v4l2 video video_device */ - retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER, - video_nr[dev->devno]); - if (retval) { - em28xx_errdev("unable to register video device (error=%i).\n", - retval); - goto fail_unreg; - } - - /* Allocate and fill vbi video_device struct */ - dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi"); - /* register v4l2 vbi video_device */ - if (video_register_device(dev->vbi_dev, VFL_TYPE_VBI, - vbi_nr[dev->devno]) < 0) { - em28xx_errdev("unable to register vbi device\n"); - retval = -ENODEV; - goto fail_unreg; - } - - if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) { - dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio"); - if (NULL == dev->radio_dev) { - em28xx_errdev("cannot allocate video_device.\n"); - goto fail_unreg; - } - retval = video_register_device(dev->radio_dev, VFL_TYPE_RADIO, - radio_nr[dev->devno]); - if (retval < 0) { - em28xx_errdev("can't register radio device\n"); - goto fail_unreg; - } - em28xx_info("Registered radio device as /dev/radio%d\n", - dev->radio_dev->num); - } - /* init video dma queues */ INIT_LIST_HEAD(&dev->vidq.active); INIT_LIST_HEAD(&dev->vidq.queued); @@ -2071,8 +2084,14 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, video_mux(dev, 0); - em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n", - dev->vdev->num, dev->vbi_dev->num); + mutex_lock(&em28xx_devlist_mutex); + list_add_tail(&dev->devlist, &em28xx_devlist); + retval = register_analog_devices(dev); + if (retval < 0) { + em28xx_release_resources(dev); + mutex_unlock(&em28xx_devlist_mutex); + goto fail_reg_devices; + } mutex_lock(&em28xx_extension_devlist_lock); if (!list_empty(&em28xx_extension_devlist)) { @@ -2082,13 +2101,12 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, } } mutex_unlock(&em28xx_extension_devlist_lock); + mutex_unlock(&em28xx_devlist_mutex); return 0; -fail_unreg: - em28xx_release_resources(dev); +fail_reg_devices: mutex_unlock(&dev->lock); - kfree(dev); return retval; } @@ -2231,8 +2249,12 @@ static int em28xx_usb_probe(struct usb_interface *interface, /* allocate device struct */ retval = em28xx_init_dev(&dev, udev, nr); - if (retval) + if (retval) { + em28xx_devused &= ~(1<<dev->devno); + kfree(dev); + return retval; + } em28xx_info("Found %s\n", em28xx_boards[dev->model].name); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 82781178e0a3..5956e9b3062f 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -102,6 +102,9 @@ #define EM28XX_MIN_BUF 4 #define EM28XX_DEF_BUF 8 +/*Limits the max URB message size */ +#define URB_MAX_CTRL_SIZE 80 + /* Params for validated field */ #define EM28XX_BOARD_NOT_VALIDATED 1 #define EM28XX_BOARD_VALIDATED 0 @@ -430,6 +433,7 @@ struct em28xx { /* locks */ struct mutex lock; + struct mutex ctrl_urb_lock; /* protects urb_buf */ /* spinlock_t queue_lock; */ struct list_head inqueue, outqueue; wait_queue_head_t open, wait_frame, wait_stream; @@ -451,6 +455,8 @@ struct em28xx { unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */ struct urb *urb[EM28XX_NUM_BUFS]; /* urb for isoc transfers */ char *transfer_buffer[EM28XX_NUM_BUFS]; /* transfer buffers for isoc transfer */ + char urb_buf[URB_MAX_CTRL_SIZE]; /* urb control msg buffer */ + /* helper funcs that call usb_control_msg */ int (*em28xx_write_regs) (struct em28xx *dev, u16 reg, char *buf, int len); diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index 4d0817471c9f..6b557c057fac 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -3,16 +3,16 @@ menuconfig USB_GSPCA depends on VIDEO_V4L2 default m ---help--- - Say Y here if you want to enable selecting webcams based - on the GSPCA framework. + Say Y here if you want to enable selecting webcams based + on the GSPCA framework. - See <file:Documentation/video4linux/gspca.txt> for more info. + See <file:Documentation/video4linux/gspca.txt> for more info. - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" to use this driver. + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" to use this driver. - To compile this driver as modules, choose M here: the - modules will be called gspca_main. + To compile this driver as modules, choose M here: the + modules will be called gspca_main. if USB_GSPCA && VIDEO_V4L2 @@ -23,190 +23,190 @@ config USB_GSPCA_CONEX tristate "Conexant Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the Conexant chip. + Say Y here if you want support for cameras based on the Conexant chip. - To compile this driver as a module, choose M here: the - module will be called gspca_conex. + To compile this driver as a module, choose M here: the + module will be called gspca_conex. config USB_GSPCA_ETOMS tristate "Etoms USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the Etoms chip. + Say Y here if you want support for cameras based on the Etoms chip. - To compile this driver as a module, choose M here: the - module will be called gspca_etoms. + To compile this driver as a module, choose M here: the + module will be called gspca_etoms. config USB_GSPCA_FINEPIX tristate "Fujifilm FinePix USB V4L2 driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the FinePix chip. + Say Y here if you want support for cameras based on the FinePix chip. - To compile this driver as a module, choose M here: the - module will be called gspca_finepix. + To compile this driver as a module, choose M here: the + module will be called gspca_finepix. config USB_GSPCA_MARS tristate "Mars USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the Mars chip. + Say Y here if you want support for cameras based on the Mars chip. - To compile this driver as a module, choose M here: the - module will be called gspca_mars. + To compile this driver as a module, choose M here: the + module will be called gspca_mars. config USB_GSPCA_OV519 tristate "OV519 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the OV519 chip. + Say Y here if you want support for cameras based on the OV519 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_ov519. + To compile this driver as a module, choose M here: the + module will be called gspca_ov519. config USB_GSPCA_PAC207 tristate "Pixart PAC207 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the PAC207 chip. + Say Y here if you want support for cameras based on the PAC207 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_pac207. + To compile this driver as a module, choose M here: the + module will be called gspca_pac207. config USB_GSPCA_PAC7311 tristate "Pixart PAC7311 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the PAC7311 chip. + Say Y here if you want support for cameras based on the PAC7311 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_pac7311. + To compile this driver as a module, choose M here: the + module will be called gspca_pac7311. config USB_GSPCA_SONIXB tristate "SN9C102 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SONIXB chip. + Say Y here if you want support for cameras based on the SONIXB chip. - To compile this driver as a module, choose M here: the - module will be called gspca_sonixb. + To compile this driver as a module, choose M here: the + module will be called gspca_sonixb. config USB_GSPCA_SONIXJ tristate "SONIX JPEG USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SONIXJ chip. + Say Y here if you want support for cameras based on the SONIXJ chip. - To compile this driver as a module, choose M here: the - module will be called gspca_sonixj + To compile this driver as a module, choose M here: the + module will be called gspca_sonixj config USB_GSPCA_SPCA500 tristate "SPCA500 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SPCA500 chip. + Say Y here if you want support for cameras based on the SPCA500 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_spca500. + To compile this driver as a module, choose M here: the + module will be called gspca_spca500. config USB_GSPCA_SPCA501 tristate "SPCA501 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SPCA501 chip. + Say Y here if you want support for cameras based on the SPCA501 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_spca501. + To compile this driver as a module, choose M here: the + module will be called gspca_spca501. config USB_GSPCA_SPCA505 tristate "SPCA505 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SPCA505 chip. + Say Y here if you want support for cameras based on the SPCA505 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_spca505. + To compile this driver as a module, choose M here: the + module will be called gspca_spca505. config USB_GSPCA_SPCA506 tristate "SPCA506 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SPCA506 chip. + Say Y here if you want support for cameras based on the SPCA506 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_spca506. + To compile this driver as a module, choose M here: the + module will be called gspca_spca506. config USB_GSPCA_SPCA508 tristate "SPCA508 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SPCA508 chip. + Say Y here if you want support for cameras based on the SPCA508 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_spca508. + To compile this driver as a module, choose M here: the + module will be called gspca_spca508. config USB_GSPCA_SPCA561 tristate "SPCA561 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SPCA561 chip. + Say Y here if you want support for cameras based on the SPCA561 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_spca561. + To compile this driver as a module, choose M here: the + module will be called gspca_spca561. config USB_GSPCA_STK014 tristate "Syntek DV4000 (STK014) USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the STK014 chip. + Say Y here if you want support for cameras based on the STK014 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_stk014. + To compile this driver as a module, choose M here: the + module will be called gspca_stk014. config USB_GSPCA_SUNPLUS tristate "SUNPLUS USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the Sunplus - SPCA504(abc) SPCA533 SPCA536 chips. + Say Y here if you want support for cameras based on the Sunplus + SPCA504(abc) SPCA533 SPCA536 chips. - To compile this driver as a module, choose M here: the - module will be called gspca_spca5xx. + To compile this driver as a module, choose M here: the + module will be called gspca_spca5xx. config USB_GSPCA_T613 tristate "T613 (JPEG Compliance) USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the T613 chip. + Say Y here if you want support for cameras based on the T613 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_t613. + To compile this driver as a module, choose M here: the + module will be called gspca_t613. config USB_GSPCA_TV8532 tristate "TV8532 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the TV8531 chip. + Say Y here if you want support for cameras based on the TV8531 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_tv8532. + To compile this driver as a module, choose M here: the + module will be called gspca_tv8532. config USB_GSPCA_VC032X tristate "VC032X USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the VC032X chip. + Say Y here if you want support for cameras based on the VC032X chip. - To compile this driver as a module, choose M here: the - module will be called gspca_vc032x. + To compile this driver as a module, choose M here: the + module will be called gspca_vc032x. config USB_GSPCA_ZC3XX - tristate "VC3xx USB Camera Driver" + tristate "ZC3XX USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the ZC3XX chip. + Say Y here if you want support for cameras based on the ZC3XX chip. - To compile this driver as a module, choose M here: the - module will be called gspca_zc3xx. + To compile this driver as a module, choose M here: the + module will be called gspca_zc3xx. endif diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c index a9d51ba7c57c..de28354ea5ba 100644 --- a/drivers/media/video/gspca/conex.c +++ b/drivers/media/video/gspca/conex.c @@ -846,10 +846,13 @@ static int sd_start(struct gspca_dev *gspca_dev) return 0; } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { int retry = 50; + if (!gspca_dev->present) + return; reg_w_val(gspca_dev, 0x0000, 0x00); reg_r(gspca_dev, 0x0002, 1); reg_w_val(gspca_dev, 0x0053, 0x00); diff --git a/drivers/media/video/gspca/finepix.c b/drivers/media/video/gspca/finepix.c index 65d3cbfe6b27..607942fd7970 100644 --- a/drivers/media/video/gspca/finepix.c +++ b/drivers/media/video/gspca/finepix.c @@ -276,6 +276,12 @@ static void sd_stopN(struct gspca_dev *gspca_dev) /* Stop the state machine */ if (dev->state != FPIX_NOP) wait_for_completion(&dev->can_close); +} + +/* called on streamoff with alt 0 and disconnect */ +static void sd_stop0(struct gspca_dev *gspca_dev) +{ + struct usb_fpix *dev = (struct usb_fpix *) gspca_dev; usb_free_urb(dev->control_urb); dev->control_urb = NULL; @@ -385,6 +391,7 @@ static int sd_start(struct gspca_dev *gspca_dev) error: /* Free the ressources */ sd_stopN(gspca_dev); + sd_stop0(gspca_dev); return ret; } @@ -425,6 +432,7 @@ static const struct sd_desc sd_desc = { .init = sd_init, .start = sd_start, .stopN = sd_stopN, + .stop0 = sd_stop0, }; /* -- device connect -- */ diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index e48fbfc8ad05..748a87e82e44 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -646,15 +646,14 @@ static void gspca_stream_off(struct gspca_dev *gspca_dev) { gspca_dev->streaming = 0; atomic_set(&gspca_dev->nevent, 0); - if (gspca_dev->present) { - if (gspca_dev->sd_desc->stopN) - gspca_dev->sd_desc->stopN(gspca_dev); - destroy_urbs(gspca_dev); - gspca_set_alt0(gspca_dev); - if (gspca_dev->sd_desc->stop0) - gspca_dev->sd_desc->stop0(gspca_dev); - PDEBUG(D_STREAM, "stream off OK"); - } + if (gspca_dev->present + && gspca_dev->sd_desc->stopN) + gspca_dev->sd_desc->stopN(gspca_dev); + destroy_urbs(gspca_dev); + gspca_set_alt0(gspca_dev); + if (gspca_dev->sd_desc->stop0) + gspca_dev->sd_desc->stop0(gspca_dev); + PDEBUG(D_STREAM, "stream off OK"); } static void gspca_set_default_mode(struct gspca_dev *gspca_dev) @@ -863,7 +862,7 @@ static int dev_open(struct inode *inode, struct file *file) int ret; PDEBUG(D_STREAM, "%s open", current->comm); - gspca_dev = (struct gspca_dev *) video_devdata(file); + gspca_dev = video_drvdata(file); if (mutex_lock_interruptible(&gspca_dev->queue_lock)) return -ERESTARTSYS; if (!gspca_dev->present) { @@ -875,6 +874,13 @@ static int dev_open(struct inode *inode, struct file *file) ret = -EBUSY; goto out; } + + /* protect the subdriver against rmmod */ + if (!try_module_get(gspca_dev->module)) { + ret = -ENODEV; + goto out; + } + gspca_dev->users++; /* one more user */ @@ -884,10 +890,10 @@ static int dev_open(struct inode *inode, struct file *file) #ifdef GSPCA_DEBUG /* activate the v4l2 debug */ if (gspca_debug & D_V4L2) - gspca_dev->vdev.debug |= V4L2_DEBUG_IOCTL + gspca_dev->vdev->debug |= V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG; else - gspca_dev->vdev.debug &= ~(V4L2_DEBUG_IOCTL + gspca_dev->vdev->debug &= ~(V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG); #endif ret = 0; @@ -921,6 +927,7 @@ static int dev_close(struct inode *inode, struct file *file) gspca_dev->memory = GSPCA_MEMORY_NO; } file->private_data = NULL; + module_put(gspca_dev->module); mutex_unlock(&gspca_dev->queue_lock); PDEBUG(D_STREAM, "close done"); @@ -1748,11 +1755,6 @@ out: return ret; } -static void dev_release(struct video_device *vfd) -{ - /* nothing */ -} - static struct file_operations dev_fops = { .owner = THIS_MODULE, .open = dev_open, @@ -1800,7 +1802,7 @@ static struct video_device gspca_template = { .name = "gspca main driver", .fops = &dev_fops, .ioctl_ops = &dev_ioctl_ops, - .release = dev_release, /* mandatory */ + .release = video_device_release, .minor = -1, }; @@ -1869,17 +1871,18 @@ int gspca_dev_probe(struct usb_interface *intf, init_waitqueue_head(&gspca_dev->wq); /* init video stuff */ - memcpy(&gspca_dev->vdev, &gspca_template, sizeof gspca_template); - gspca_dev->vdev.parent = &dev->dev; - memcpy(&gspca_dev->fops, &dev_fops, sizeof gspca_dev->fops); - gspca_dev->vdev.fops = &gspca_dev->fops; - gspca_dev->fops.owner = module; /* module protection */ + gspca_dev->vdev = video_device_alloc(); + memcpy(gspca_dev->vdev, &gspca_template, sizeof gspca_template); + gspca_dev->vdev->parent = &dev->dev; + gspca_dev->module = module; gspca_dev->present = 1; - ret = video_register_device(&gspca_dev->vdev, + video_set_drvdata(gspca_dev->vdev, gspca_dev); + ret = video_register_device(gspca_dev->vdev, VFL_TYPE_GRABBER, video_nr); if (ret < 0) { err("video_register_device err %d", ret); + video_device_release(gspca_dev->vdev); goto out; } @@ -1887,7 +1890,8 @@ int gspca_dev_probe(struct usb_interface *intf, PDEBUG(D_PROBE, "probe ok"); return 0; out: - kref_put(&gspca_dev->kref, gspca_delete); + kfree(gspca_dev->usb_buf); + kfree(gspca_dev); return ret; } EXPORT_SYMBOL(gspca_dev_probe); @@ -1905,7 +1909,7 @@ void gspca_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); /* We don't want people trying to open up the device */ - video_unregister_device(&gspca_dev->vdev); + video_unregister_device(gspca_dev->vdev); gspca_dev->present = 0; gspca_dev->streaming = 0; diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 1d9dc90b4791..d25e8d69373b 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -97,7 +97,7 @@ struct sd_desc { cam_pkt_op pkt_scan; /* optional operations */ cam_v_op stopN; /* called on stream off - main alt */ - cam_v_op stop0; /* called on stream off - alt 0 */ + cam_v_op stop0; /* called on stream off & disconnect - alt 0 */ cam_v_op dq_callback; /* called when a frame has been dequeued */ cam_jpg_op get_jcomp; cam_jpg_op set_jcomp; @@ -120,8 +120,8 @@ struct gspca_frame { }; struct gspca_dev { - struct video_device vdev; /* !! must be the first item */ - struct file_operations fops; + struct video_device *vdev; + struct module *module; /* subdriver handling the device */ struct usb_device *dev; struct kref kref; struct file *capt_file; /* file doing video capture */ diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index e5ff9a6199ef..fbd45e235d97 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -749,10 +749,13 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */ } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + if (!gspca_dev->present) + return; if (sd->sensor == SENSOR_PAC7302) { reg_w(gspca_dev, 0xff, 0x01); reg_w(gspca_dev, 0x78, 0x40); diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c index b742f260c7ca..e29954c1c38c 100644 --- a/drivers/media/video/gspca/spca501.c +++ b/drivers/media/video/gspca/spca501.c @@ -2022,8 +2022,11 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x01, 0x00); } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { + if (!gspca_dev->present) + return; reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x05, 0x00); } diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c index b345749213cf..895b9fe4018c 100644 --- a/drivers/media/video/gspca/spca505.c +++ b/drivers/media/video/gspca/spca505.c @@ -742,8 +742,12 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_write(gspca_dev->dev, 0x02, 0x00, 0x00); } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { + if (!gspca_dev->present) + return; + /* This maybe reset or power control */ reg_write(gspca_dev->dev, 0x03, 0x03, 0x20); reg_write(gspca_dev->dev, 0x03, 0x01, 0x0); diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index 020a03c466c1..c3de4e44123d 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -766,10 +766,13 @@ static void sd_stopN(struct gspca_dev *gspca_dev) } } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + if (!gspca_dev->present) + return; if (sd->chip_revision == Rev012A) { reg_w_val(gspca_dev->dev, 0x8118, 0x29); reg_w_val(gspca_dev->dev, 0x8114, 0x08); diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index be46d9232540..17af353ddd1c 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -1633,10 +1633,13 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_w(dev, 0xa0, 0x09, 0xb003); } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { struct usb_device *dev = gspca_dev->dev; + if (!gspca_dev->present) + return; reg_w(dev, 0x89, 0xffff, 0xffff); } diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index d0a4451dc46f..0befacf49855 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -2266,7 +2266,7 @@ static const struct usb_action hdcs2020b_NoFliker[] = { {} }; -static const struct usb_action hv7131bxx_Initial[] = { +static const struct usb_action hv7131bxx_Initial[] = { /* 320x240 */ {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, {0xa0, 0x10, ZC3XX_R002_CLOCKSELECT}, {0xa0, 0x00, ZC3XX_R010_CMOSSENSORSELECT}, @@ -2290,7 +2290,7 @@ static const struct usb_action hv7131bxx_Initial[] = { {0xaa, 0x14, 0x0001}, {0xaa, 0x15, 0x00e8}, {0xaa, 0x16, 0x0002}, - {0xaa, 0x17, 0x0086}, + {0xaa, 0x17, 0x0086}, /* 00,17,88,aa */ {0xaa, 0x31, 0x0038}, {0xaa, 0x32, 0x0038}, {0xaa, 0x33, 0x0038}, @@ -2309,7 +2309,7 @@ static const struct usb_action hv7131bxx_Initial[] = { {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05}, {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE}, {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS}, - {0xaa, 0x02, 0x0080}, /* {0xaa, 0x02, 0x0090}; */ + {0xaa, 0x02, 0x0090}, /* 00,02,80,aa */ {0xa1, 0x01, 0x0002}, {0xa0, 0x00, ZC3XX_R092_I2CADDRESSSELECT}, {0xa0, 0x02, ZC3XX_R090_I2CCOMMAND}, @@ -2374,7 +2374,7 @@ static const struct usb_action hv7131bxx_Initial[] = { {} }; -static const struct usb_action hv7131bxx_InitialScale[] = { +static const struct usb_action hv7131bxx_InitialScale[] = { /* 640x480*/ {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, {0xa0, 0x00, ZC3XX_R002_CLOCKSELECT}, {0xa0, 0x00, ZC3XX_R010_CMOSSENSORSELECT}, @@ -6388,6 +6388,8 @@ static void setbrightness(struct gspca_dev *gspca_dev) /*fixme: is it really write to 011d and 018d for all other sensors? */ brightness = sd->brightness; reg_w(gspca_dev->dev, brightness, 0x011d); + if (sd->sensor == SENSOR_HV7131B) + return; if (brightness < 0x70) brightness += 0x10; else @@ -6529,6 +6531,7 @@ static void setquality(struct gspca_dev *gspca_dev) switch (sd->sensor) { case SENSOR_GC0305: + case SENSOR_HV7131B: case SENSOR_OV7620: case SENSOR_PO2030: return; @@ -7209,7 +7212,6 @@ static int sd_start(struct gspca_dev *gspca_dev) mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; zc3_init = init_tb[(int) sd->sensor][mode]; switch (sd->sensor) { - case SENSOR_HV7131B: case SENSOR_HV7131C: zcxx_probeSensor(gspca_dev); break; @@ -7334,10 +7336,13 @@ static int sd_start(struct gspca_dev *gspca_dev) return 0; } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + if (!gspca_dev->present) + return; send_unknown(gspca_dev->dev, sd->sensor); } diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig index 0069898bddab..c46bfb1569e3 100644 --- a/drivers/media/video/ivtv/Kconfig +++ b/drivers/media/video/ivtv/Kconfig @@ -1,6 +1,6 @@ config VIDEO_IVTV tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support" - depends on VIDEO_V4L1 && VIDEO_V4L2 && PCI && I2C && EXPERIMENTAL + depends on VIDEO_V4L2 && PCI && I2C depends on INPUT # due to VIDEO_IR select I2C_ALGOBIT select VIDEO_IR @@ -12,7 +12,6 @@ config VIDEO_IVTV select VIDEO_SAA711X select VIDEO_SAA717X select VIDEO_SAA7127 - select VIDEO_TVAUDIO select VIDEO_CS53L32A select VIDEO_M52790 select VIDEO_WM8775 @@ -32,7 +31,7 @@ config VIDEO_IVTV config VIDEO_FB_IVTV tristate "Conexant cx23415 framebuffer support" - depends on VIDEO_IVTV && FB && EXPERIMENTAL + depends on VIDEO_IVTV && FB select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index d36485023b68..b69cc1d55e5b 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -875,43 +875,43 @@ static void ivtv_load_and_init_modules(struct ivtv *itv) #ifdef MODULE /* load modules */ -#ifndef CONFIG_MEDIA_TUNER +#ifdef CONFIG_MEDIA_TUNER_MODULE hw = ivtv_request_module(itv, hw, "tuner", IVTV_HW_TUNER); #endif -#ifndef CONFIG_VIDEO_CX25840 +#ifdef CONFIG_VIDEO_CX25840_MODULE hw = ivtv_request_module(itv, hw, "cx25840", IVTV_HW_CX25840); #endif -#ifndef CONFIG_VIDEO_SAA711X +#ifdef CONFIG_VIDEO_SAA711X_MODULE hw = ivtv_request_module(itv, hw, "saa7115", IVTV_HW_SAA711X); #endif -#ifndef CONFIG_VIDEO_SAA7127 +#ifdef CONFIG_VIDEO_SAA7127_MODULE hw = ivtv_request_module(itv, hw, "saa7127", IVTV_HW_SAA7127); #endif -#ifndef CONFIG_VIDEO_SAA717X +#ifdef CONFIG_VIDEO_SAA717X_MODULE hw = ivtv_request_module(itv, hw, "saa717x", IVTV_HW_SAA717X); #endif -#ifndef CONFIG_VIDEO_UPD64031A +#ifdef CONFIG_VIDEO_UPD64031A_MODULE hw = ivtv_request_module(itv, hw, "upd64031a", IVTV_HW_UPD64031A); #endif -#ifndef CONFIG_VIDEO_UPD64083 +#ifdef CONFIG_VIDEO_UPD64083_MODULE hw = ivtv_request_module(itv, hw, "upd64083", IVTV_HW_UPD6408X); #endif -#ifndef CONFIG_VIDEO_MSP3400 +#ifdef CONFIG_VIDEO_MSP3400_MODULE hw = ivtv_request_module(itv, hw, "msp3400", IVTV_HW_MSP34XX); #endif -#ifndef CONFIG_VIDEO_VP27SMPX +#ifdef CONFIG_VIDEO_VP27SMPX_MODULE hw = ivtv_request_module(itv, hw, "vp27smpx", IVTV_HW_VP27SMPX); #endif -#ifndef CONFIG_VIDEO_WM8775 +#ifdef CONFIG_VIDEO_WM8775_MODULE hw = ivtv_request_module(itv, hw, "wm8775", IVTV_HW_WM8775); #endif -#ifndef CONFIG_VIDEO_WM8739 +#ifdef CONFIG_VIDEO_WM8739_MODULE hw = ivtv_request_module(itv, hw, "wm8739", IVTV_HW_WM8739); #endif -#ifndef CONFIG_VIDEO_CS53L32A +#ifdef CONFIG_VIDEO_CS53L32A_MODULE hw = ivtv_request_module(itv, hw, "cs53l32a", IVTV_HW_CS53L32A); #endif -#ifndef CONFIG_VIDEO_M52790 +#ifdef CONFIG_VIDEO_M52790_MODULE hw = ivtv_request_module(itv, hw, "m52790", IVTV_HW_M52790); #endif #endif diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index 5272926db73e..3c3f8cf73108 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -192,7 +192,7 @@ struct s2255_dmaqueue { #define S2255_FW_FAILED 3 #define S2255_FW_DISCONNECTING 4 -#define S2255_FW_MARKER 0x22552f2f +#define S2255_FW_MARKER cpu_to_le32(0x22552f2f) /* 2255 read states */ #define S2255_READ_IDLE 0 #define S2255_READ_FRAME 1 diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c index adf2ba79496a..37860698f782 100644 --- a/drivers/media/video/saa7110.c +++ b/drivers/media/video/saa7110.c @@ -47,7 +47,7 @@ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); #define SAA7110_MAX_INPUT 9 /* 6 CVBS, 3 SVHS */ -#define SAA7110_MAX_OUTPUT 0 /* its a decoder only */ +#define SAA7110_MAX_OUTPUT 1 /* 1 YUV */ #define SAA7110_NR_REG 0x35 @@ -327,7 +327,7 @@ saa7110_command (struct i2c_client *client, case DECODER_SET_INPUT: v = *(int *) arg; - if (v < 0 || v > SAA7110_MAX_INPUT) { + if (v < 0 || v >= SAA7110_MAX_INPUT) { v4l_dbg(1, debug, client, "input=%d not available\n", v); return -EINVAL; } diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 249184452949..dfbe08a9ad9b 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -941,7 +941,8 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, dev->name,(unsigned long long)pci_resource_start(pci_dev,0)); goto fail1; } - dev->lmmio = ioremap(pci_resource_start(pci_dev,0), 0x1000); + dev->lmmio = ioremap(pci_resource_start(pci_dev, 0), + pci_resource_len(pci_dev, 0)); dev->bmmio = (__u8 __iomem *)dev->lmmio; if (NULL == dev->lmmio) { err = -EIO; diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index b59e47272abf..3720f0e03a16 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1,5 +1,5 @@ /* - * experimental driver for simple i2c audio chips. + * Driver for simple i2c audio chips. * * Copyright (c) 2000 Gerd Knorr * based on code by: @@ -7,6 +7,10 @@ * Steve VanDeBogart (vandebo@uclink.berkeley.edu) * Greg Alexander (galexand@acm.org) * + * Copyright(c) 2005-2008 Mauro Carvalho Chehab + * - Some cleanups, code fixes, etc + * - Convert it to V4L2 API + * * This code is placed under the terms of the GNU General Public License * * OPTIONS: @@ -30,6 +34,7 @@ #include <media/tvaudio.h> #include <media/v4l2-common.h> +#include <media/v4l2-ioctl.h> #include <media/v4l2-chip-ident.h> #include <media/v4l2-i2c-drv-legacy.h> @@ -58,7 +63,6 @@ typedef int (*checkit)(struct CHIPSTATE*); typedef int (*initialize)(struct CHIPSTATE*); typedef int (*getmode)(struct CHIPSTATE*); typedef void (*setmode)(struct CHIPSTATE*, int mode); -typedef void (*checkmode)(struct CHIPSTATE*); /* i2c command */ typedef struct AUDIOCMD { @@ -79,6 +83,7 @@ struct CHIPDESC { #define CHIP_HAS_VOLUME 1 #define CHIP_HAS_BASSTREBLE 2 #define CHIP_HAS_INPUTSEL 4 +#define CHIP_NEED_CHECKMODE 8 /* various i2c command sequences */ audiocmd init; @@ -96,23 +101,20 @@ struct CHIPDESC { getmode getmode; setmode setmode; - /* check / autoswitch audio after channel switches */ - checkmode checkmode; - /* input switch register + values for v4l inputs */ int inputreg; int inputmap[4]; int inputmute; int inputmask; }; -static struct CHIPDESC chiplist[]; /* current state of the chip */ struct CHIPSTATE { struct i2c_client *c; - /* index into CHIPDESC array */ - int type; + /* chip-specific description - should point to + an entry at CHIPDESC table */ + struct CHIPDESC *desc; /* shadow register set */ audiocmd shadow; @@ -152,7 +154,7 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val) { unsigned char buffer[2]; - if (-1 == subaddr) { + if (subaddr < 0) { v4l_dbg(1, debug, chip->c, "%s: chip_write: 0x%x\n", chip->c->name, val); chip->shadow.bytes[1] = val; @@ -163,6 +165,13 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val) return -1; } } else { + if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l_info(chip->c, + "Tried to access a non-existent register: %d\n", + subaddr); + return -EINVAL; + } + v4l_dbg(1, debug, chip->c, "%s: chip_write: reg%d=0x%x\n", chip->c->name, subaddr, val); chip->shadow.bytes[subaddr+1] = val; @@ -177,12 +186,20 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val) return 0; } -static int chip_write_masked(struct CHIPSTATE *chip, int subaddr, int val, int mask) +static int chip_write_masked(struct CHIPSTATE *chip, + int subaddr, int val, int mask) { if (mask != 0) { - if (-1 == subaddr) { + if (subaddr < 0) { val = (chip->shadow.bytes[1] & ~mask) | (val & mask); } else { + if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l_info(chip->c, + "Tried to access a non-existent register: %d\n", + subaddr); + return -EINVAL; + } + val = (chip->shadow.bytes[subaddr+1] & ~mask) | (val & mask); } } @@ -228,6 +245,15 @@ static int chip_cmd(struct CHIPSTATE *chip, char *name, audiocmd *cmd) if (0 == cmd->count) return 0; + if (cmd->count + cmd->bytes[0] - 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l_info(chip->c, + "Tried to access a non-existent register range: %d to %d\n", + cmd->bytes[0] + 1, cmd->bytes[0] + cmd->count - 1); + return -EINVAL; + } + + /* FIXME: it seems that the shadow bytes are wrong bellow !*/ + /* update our shadow register set; print bytes if (debug > 0) */ v4l_dbg(1, debug, chip->c, "%s: chip_cmd(%s): reg=%d, data:", chip->c->name, name,cmd->bytes[0]); @@ -263,7 +289,8 @@ static void chip_thread_wake(unsigned long data) static int chip_thread(void *data) { struct CHIPSTATE *chip = data; - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; + int mode; v4l_dbg(1, debug, chip->c, "%s: thread started\n", chip->c->name); set_freezable(); @@ -282,7 +309,26 @@ static int chip_thread(void *data) continue; /* have a look what's going on */ - desc->checkmode(chip); + mode = desc->getmode(chip); + if (mode == chip->prevmode) + continue; + + /* chip detected a new audio mode - set it */ + v4l_dbg(1, debug, chip->c, "%s: thread checkmode\n", + chip->c->name); + + chip->prevmode = mode; + + if (mode & V4L2_TUNER_MODE_STEREO) + desc->setmode(chip, V4L2_TUNER_MODE_STEREO); + if (mode & V4L2_TUNER_MODE_LANG1_LANG2) + desc->setmode(chip, V4L2_TUNER_MODE_STEREO); + else if (mode & V4L2_TUNER_MODE_LANG1) + desc->setmode(chip, V4L2_TUNER_MODE_LANG1); + else if (mode & V4L2_TUNER_MODE_LANG2) + desc->setmode(chip, V4L2_TUNER_MODE_LANG2); + else + desc->setmode(chip, V4L2_TUNER_MODE_MONO); /* schedule next check */ mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000)); @@ -292,29 +338,6 @@ static int chip_thread(void *data) return 0; } -static void generic_checkmode(struct CHIPSTATE *chip) -{ - struct CHIPDESC *desc = chiplist + chip->type; - int mode = desc->getmode(chip); - - if (mode == chip->prevmode) - return; - - v4l_dbg(1, debug, chip->c, "%s: thread checkmode\n", chip->c->name); - chip->prevmode = mode; - - if (mode & V4L2_TUNER_MODE_STEREO) - desc->setmode(chip,V4L2_TUNER_MODE_STEREO); - if (mode & V4L2_TUNER_MODE_LANG1_LANG2) - desc->setmode(chip,V4L2_TUNER_MODE_STEREO); - else if (mode & V4L2_TUNER_MODE_LANG1) - desc->setmode(chip,V4L2_TUNER_MODE_LANG1); - else if (mode & V4L2_TUNER_MODE_LANG2) - desc->setmode(chip,V4L2_TUNER_MODE_LANG2); - else - desc->setmode(chip,V4L2_TUNER_MODE_MONO); -} - /* ---------------------------------------------------------------------- */ /* audio chip descriptions - defines+functions for tda9840 */ @@ -777,7 +800,7 @@ static struct tda9874a_MODES { char *name; audiocmd cmd; } tda9874a_modelist[9] = { - { "A2, B/G", + { "A2, B/G", /* default */ { 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x77,0xA0,0x00, 0x00,0x00 }} }, { "A2, M (Korea)", { 9, { TDA9874A_C1FRA, 0x5D,0xC0,0x00, 0x62,0x6A,0xAA, 0x20,0x22 }} }, @@ -791,7 +814,7 @@ static struct tda9874a_MODES { { 9, { TDA9874A_C1FRA, 0x7D,0x00,0x00, 0x88,0x8A,0xAA, 0x08,0x33 }} }, { "NICAM, B/G", { 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x79,0xEA,0xAA, 0x08,0x33 }} }, - { "NICAM, D/K", /* default */ + { "NICAM, D/K", { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x08,0x33 }} }, { "NICAM, L", { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x09,0x33 }} } @@ -981,7 +1004,7 @@ static int tda9874a_initialize(struct CHIPSTATE *chip) { if (tda9874a_SIF > 2) tda9874a_SIF = 1; - if (tda9874a_STD > 8) + if (tda9874a_STD >= ARRAY_SIZE(tda9874a_modelist)) tda9874a_STD = 0; if(tda9874a_AMSEL > 1) tda9874a_AMSEL = 0; @@ -1089,7 +1112,7 @@ static int tda8425_shift12(int val) { return (val >> 12) | 0xf0; } static int tda8425_initialize(struct CHIPSTATE *chip) { - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; int inputmap[4] = { /* tuner */ TDA8425_S1_CH2, /* radio */ TDA8425_S1_CH1, /* extern */ TDA8425_S1_CH1, /* intern */ TDA8425_S1_OFF}; @@ -1259,27 +1282,28 @@ static struct CHIPDESC chiplist[] = { .addr_lo = I2C_ADDR_TDA9840 >> 1, .addr_hi = I2C_ADDR_TDA9840 >> 1, .registers = 5, + .flags = CHIP_NEED_CHECKMODE, + /* callbacks */ .checkit = tda9840_checkit, .getmode = tda9840_getmode, .setmode = tda9840_setmode, - .checkmode = generic_checkmode, .init = { 2, { TDA9840_TEST, TDA9840_TEST_INT1SN /* ,TDA9840_SW, TDA9840_MONO */} } }, { .name = "tda9873h", - .checkit = tda9873_checkit, .insmodopt = &tda9873, .addr_lo = I2C_ADDR_TDA985x_L >> 1, .addr_hi = I2C_ADDR_TDA985x_H >> 1, .registers = 3, - .flags = CHIP_HAS_INPUTSEL, + .flags = CHIP_HAS_INPUTSEL | CHIP_NEED_CHECKMODE, + /* callbacks */ + .checkit = tda9873_checkit, .getmode = tda9873_getmode, .setmode = tda9873_setmode, - .checkmode = generic_checkmode, .init = { 4, { TDA9873_SW, 0xa4, 0x06, 0x03 } }, .inputreg = TDA9873_SW, @@ -1290,15 +1314,16 @@ static struct CHIPDESC chiplist[] = { }, { .name = "tda9874h/a", - .checkit = tda9874a_checkit, - .initialize = tda9874a_initialize, .insmodopt = &tda9874a, .addr_lo = I2C_ADDR_TDA9874 >> 1, .addr_hi = I2C_ADDR_TDA9874 >> 1, + .flags = CHIP_NEED_CHECKMODE, + /* callbacks */ + .initialize = tda9874a_initialize, + .checkit = tda9874a_checkit, .getmode = tda9874a_getmode, .setmode = tda9874a_setmode, - .checkmode = generic_checkmode, }, { .name = "tda9850", @@ -1324,10 +1349,11 @@ static struct CHIPDESC chiplist[] = { .rightreg = TDA9855_VR, .bassreg = TDA9855_BA, .treblereg = TDA9855_TR, + + /* callbacks */ .volfunc = tda9855_volume, .bassfunc = tda9855_bass, .treblefunc = tda9855_treble, - .getmode = tda985x_getmode, .setmode = tda985x_setmode, @@ -1348,6 +1374,8 @@ static struct CHIPDESC chiplist[] = { .rightreg = TEA6300_VL, .bassreg = TEA6300_BA, .treblereg = TEA6300_TR, + + /* callbacks */ .volfunc = tea6300_shift10, .bassfunc = tea6300_shift12, .treblefunc = tea6300_shift12, @@ -1358,7 +1386,6 @@ static struct CHIPDESC chiplist[] = { }, { .name = "tea6320", - .initialize = tea6320_initialize, .insmodopt = &tea6320, .addr_lo = I2C_ADDR_TEA6300 >> 1, .addr_hi = I2C_ADDR_TEA6300 >> 1, @@ -1369,6 +1396,9 @@ static struct CHIPDESC chiplist[] = { .rightreg = TEA6320_V, .bassreg = TEA6320_BA, .treblereg = TEA6320_TR, + + /* callbacks */ + .initialize = tea6320_initialize, .volfunc = tea6320_volume, .bassfunc = tea6320_shift11, .treblefunc = tea6320_shift11, @@ -1401,16 +1431,18 @@ static struct CHIPDESC chiplist[] = { .rightreg = TDA8425_VR, .bassreg = TDA8425_BA, .treblereg = TDA8425_TR, + + /* callbacks */ + .initialize = tda8425_initialize, .volfunc = tda8425_shift10, .bassfunc = tda8425_shift12, .treblefunc = tda8425_shift12, + .setmode = tda8425_setmode, .inputreg = TDA8425_S1, .inputmap = { TDA8425_S1_CH1, TDA8425_S1_CH1, TDA8425_S1_CH1 }, .inputmute = TDA8425_S1_OFF, - .setmode = tda8425_setmode, - .initialize = tda8425_initialize, }, { .name = "pic16c54 (PV951)", @@ -1434,10 +1466,11 @@ static struct CHIPDESC chiplist[] = { .addr_lo = I2C_ADDR_TDA9840 >> 1, .addr_hi = I2C_ADDR_TDA9840 >> 1, .registers = 2, + .flags = CHIP_NEED_CHECKMODE, + /* callbacks */ .getmode = ta8874z_getmode, .setmode = ta8874z_setmode, - .checkmode = generic_checkmode, .init = {2, { TA8874Z_MONO_SET, TA8874Z_SEPARATION_DEFAULT}}, }, @@ -1481,6 +1514,7 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) } if (desc->name == NULL) { v4l_dbg(1, debug, client, "no matching chip description found\n"); + kfree(chip); return -EIO; } v4l_info(client, "%s found @ 0x%x (%s)\n", desc->name, client->addr<<1, client->adapter->name); @@ -1494,7 +1528,7 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) /* fill required data structures */ if (!id) strlcpy(client->name, desc->name, I2C_NAME_SIZE); - chip->type = desc-chiplist; + chip->desc = desc; chip->shadow.count = desc->registers+1; chip->prevmode = -1; chip->audmode = V4L2_TUNER_MODE_LANG1; @@ -1506,20 +1540,49 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) chip_cmd(chip,"init",&desc->init); if (desc->flags & CHIP_HAS_VOLUME) { - chip->left = desc->leftinit ? desc->leftinit : 65535; - chip->right = desc->rightinit ? desc->rightinit : 65535; - chip_write(chip,desc->leftreg,desc->volfunc(chip->left)); - chip_write(chip,desc->rightreg,desc->volfunc(chip->right)); + if (!desc->volfunc) { + /* This shouldn't be happen. Warn user, but keep working + without volume controls + */ + v4l_info(chip->c, "volume callback undefined!\n"); + desc->flags &= ~CHIP_HAS_VOLUME; + } else { + chip->left = desc->leftinit ? desc->leftinit : 65535; + chip->right = desc->rightinit ? desc->rightinit : 65535; + chip_write(chip, desc->leftreg, + desc->volfunc(chip->left)); + chip_write(chip, desc->rightreg, + desc->volfunc(chip->right)); + } } if (desc->flags & CHIP_HAS_BASSTREBLE) { - chip->treble = desc->trebleinit ? desc->trebleinit : 32768; - chip->bass = desc->bassinit ? desc->bassinit : 32768; - chip_write(chip,desc->bassreg,desc->bassfunc(chip->bass)); - chip_write(chip,desc->treblereg,desc->treblefunc(chip->treble)); + if (!desc->bassfunc || !desc->treblefunc) { + /* This shouldn't be happen. Warn user, but keep working + without bass/treble controls + */ + v4l_info(chip->c, "bass/treble callbacks undefined!\n"); + desc->flags &= ~CHIP_HAS_BASSTREBLE; + } else { + chip->treble = desc->trebleinit ? + desc->trebleinit : 32768; + chip->bass = desc->bassinit ? + desc->bassinit : 32768; + chip_write(chip, desc->bassreg, + desc->bassfunc(chip->bass)); + chip_write(chip, desc->treblereg, + desc->treblefunc(chip->treble)); + } } chip->thread = NULL; - if (desc->checkmode) { + if (desc->flags & CHIP_NEED_CHECKMODE) { + if (!desc->getmode || !desc->setmode) { + /* This shouldn't be happen. Warn user, but keep working + without kthread + */ + v4l_info(chip->c, "set/get mode callbacks undefined!\n"); + return 0; + } /* start async thread */ init_timer(&chip->wt); chip->wt.function = chip_thread_wake; @@ -1552,7 +1615,7 @@ static int chip_remove(struct i2c_client *client) static int tvaudio_get_ctrl(struct CHIPSTATE *chip, struct v4l2_control *ctrl) { - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -1576,13 +1639,13 @@ static int tvaudio_get_ctrl(struct CHIPSTATE *chip, return 0; } case V4L2_CID_AUDIO_BASS: - if (desc->flags & CHIP_HAS_BASSTREBLE) + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) break; ctrl->value = chip->bass; return 0; case V4L2_CID_AUDIO_TREBLE: - if (desc->flags & CHIP_HAS_BASSTREBLE) - return -EINVAL; + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) + break; ctrl->value = chip->treble; return 0; } @@ -1592,7 +1655,7 @@ static int tvaudio_get_ctrl(struct CHIPSTATE *chip, static int tvaudio_set_ctrl(struct CHIPSTATE *chip, struct v4l2_control *ctrl) { - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -1642,16 +1705,15 @@ static int tvaudio_set_ctrl(struct CHIPSTATE *chip, return 0; } case V4L2_CID_AUDIO_BASS: - if (desc->flags & CHIP_HAS_BASSTREBLE) + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) break; chip->bass = ctrl->value; chip_write(chip,desc->bassreg,desc->bassfunc(chip->bass)); return 0; case V4L2_CID_AUDIO_TREBLE: - if (desc->flags & CHIP_HAS_BASSTREBLE) - return -EINVAL; - + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) + break; chip->treble = ctrl->value; chip_write(chip,desc->treblereg,desc->treblefunc(chip->treble)); @@ -1668,9 +1730,12 @@ static int chip_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct CHIPSTATE *chip = i2c_get_clientdata(client); - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; - v4l_dbg(1, debug, chip->c, "%s: chip_command 0x%x\n", chip->c->name, cmd); + if (debug > 0) { + v4l_i2c_print_ioctl(chip->c, cmd); + printk("\n"); + } switch (cmd) { case AUDC_SET_RADIO: @@ -1695,7 +1760,7 @@ static int chip_command(struct i2c_client *client, break; case V4L2_CID_AUDIO_BASS: case V4L2_CID_AUDIO_TREBLE: - if (desc->flags & CHIP_HAS_BASSTREBLE) + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) return -EINVAL; break; default: @@ -1792,12 +1857,20 @@ static int chip_command(struct i2c_client *client, break; case VIDIOC_S_FREQUENCY: chip->mode = 0; /* automatic */ - if (desc->checkmode && desc->setmode) { + + /* For chips that provide getmode and setmode, and doesn't + automatically follows the stereo carrier, a kthread is + created to set the audio standard. In this case, when then + the video channel is changed, tvaudio starts on MONO mode. + After waiting for 2 seconds, the kernel thread is called, + to follow whatever audio standard is pointed by the + audio carrier. + */ + if (chip->thread) { desc->setmode(chip,V4L2_TUNER_MODE_MONO); if (chip->prevmode != V4L2_TUNER_MODE_MONO) chip->prevmode = -1; /* reset previous mode */ mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000)); - /* the thread will call checkmode() later */ } break; @@ -1836,9 +1909,3 @@ static struct v4l2_i2c_driver_data v4l2_i2c_data = { .legacy_probe = chip_legacy_probe, .id_table = chip_id, }; - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c index 28421d386f1e..c710bcd1df48 100644 --- a/drivers/media/video/usbvideo/ibmcam.c +++ b/drivers/media/video/usbvideo/ibmcam.c @@ -3695,7 +3695,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * unsigned char video_ep = 0; if (debug >= 1) - dev_info(&uvd->dev->dev, "ibmcam_probe(%p,%u.)\n", intf, ifnum); + dev_info(&dev->dev, "ibmcam_probe(%p,%u.)\n", intf, ifnum); /* We don't handle multi-config cameras */ if (dev->descriptor.bNumConfigurations != 1) @@ -3746,7 +3746,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * brand = "IBM PC Camera"; /* a.k.a. Xirlink C-It */ break; } - dev_info(&uvd->dev->dev, + dev_info(&dev->dev, "%s USB camera found (model %d, rev. 0x%04x)\n", brand, model, le16_to_cpu(dev->descriptor.bcdDevice)); } while (0); @@ -3754,7 +3754,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * /* Validate found interface: must have one ISO endpoint */ nas = intf->num_altsetting; if (debug > 0) - dev_info(&uvd->dev->dev, "Number of alternate settings=%d.\n", + dev_info(&dev->dev, "Number of alternate settings=%d.\n", nas); if (nas < 2) { err("Too few alternate settings for this camera!"); @@ -3799,7 +3799,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * actInterface = i; maxPS = le16_to_cpu(endpoint->wMaxPacketSize); if (debug > 0) - dev_info(&uvd->dev->dev, + dev_info(&dev->dev, "Active setting=%d. " "maxPS=%d.\n", i, maxPS); } else @@ -3840,7 +3840,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * RESTRICT_TO_RANGE(framerate, 0, 5); break; default: - dev_info(&uvd->dev->dev, "IBM camera: using 320x240\n"); + dev_info(&dev->dev, "IBM camera: using 320x240\n"); size = SIZE_320x240; /* No break here */ case SIZE_320x240: @@ -3869,7 +3869,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * canvasY = 120; break; default: - dev_info(&uvd->dev->dev, "IBM NetCamera: using 176x144\n"); + dev_info(&dev->dev, "IBM NetCamera: using 176x144\n"); size = SIZE_176x144; /* No break here */ case SIZE_176x144: diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index d62fd4f6b52e..ee090413e598 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -2008,6 +2008,9 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt) return FAILED; } + /* make sure we have no outstanding commands at this stage */ + mptscsih_flush_running_cmds(hd); + ioc = hd->ioc; printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n", ioc->name, SCpnt); diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index 84bdc2ee69e6..a443e136dc41 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -354,7 +354,7 @@ static inline void i2o_block_sglist_free(struct i2o_block_request *ireq) * @req: the request to prepare * * Allocate the necessary i2o_block_request struct and connect it to - * the request. This is needed that we not loose the SG list later on. + * the request. This is needed that we not lose the SG list later on. * * Returns BLKPREP_OK on success or BLKPREP_DEFER on failure. */ diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index be2b5926d26c..6e53a30bfd38 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -49,7 +49,6 @@ static int i2o_hrt_get(struct i2o_controller *c); /** * i2o_msg_get_wait - obtain an I2O message from the IOP * @c: I2O controller - * @msg: pointer to a I2O message pointer * @wait: how long to wait until timeout * * This function waits up to wait seconds for a message slot to be diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c index b57326ae464d..0b5bd85dfcec 100644 --- a/drivers/mfd/da903x.c +++ b/drivers/mfd/da903x.c @@ -267,7 +267,7 @@ static int da9030_mask_events(struct da903x_chip *chip, unsigned int events) { uint8_t v[3]; - chip->events_mask &= ~events; + chip->events_mask |= events; v[0] = (chip->events_mask & 0xff); v[1] = (chip->events_mask >> 8) & 0xff; diff --git a/drivers/mfd/wm8350-i2c.c b/drivers/mfd/wm8350-i2c.c index 8dfe21bb3bd1..3e0ce0e50ea2 100644 --- a/drivers/mfd/wm8350-i2c.c +++ b/drivers/mfd/wm8350-i2c.c @@ -30,7 +30,12 @@ static int wm8350_i2c_read_device(struct wm8350 *wm8350, char reg, ret = i2c_master_send(wm8350->i2c_client, ®, 1); if (ret < 0) return ret; - return i2c_master_recv(wm8350->i2c_client, dest, bytes); + ret = i2c_master_recv(wm8350->i2c_client, dest, bytes); + if (ret < 0) + return ret; + if (ret != bytes) + return -EIO; + return 0; } static int wm8350_i2c_write_device(struct wm8350 *wm8350, char reg, @@ -38,13 +43,19 @@ static int wm8350_i2c_write_device(struct wm8350 *wm8350, char reg, { /* we add 1 byte for device register */ u8 msg[(WM8350_MAX_REGISTER << 1) + 1]; + int ret; if (bytes > ((WM8350_MAX_REGISTER << 1) + 1)) return -EINVAL; msg[0] = reg; memcpy(&msg[1], src, bytes); - return i2c_master_send(wm8350->i2c_client, msg, bytes + 1); + ret = i2c_master_send(wm8350->i2c_client, msg, bytes + 1); + if (ret < 0) + return ret; + if (ret != bytes + 1) + return -EIO; + return 0; } static int wm8350_i2c_probe(struct i2c_client *i2c, diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 9494400e8fd0..fee7304102af 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -227,10 +227,20 @@ config HP_WMI To compile this driver as a module, choose M here: the module will be called hp-wmi. +config ICS932S401 + tristate "Integrated Circuits ICS932S401" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Integrated Circuits + ICS932S401 clock control chips. + + This driver can also be built as a module. If so, the module + will be called ics932s401. + config MSI_LAPTOP tristate "MSI Laptop Extras" depends on X86 - depends on ACPI_EC + depends on ACPI depends on BACKLIGHT_CLASS_DEVICE ---help--- This is a driver for laptops built by MSI (MICRO-STAR @@ -260,7 +270,7 @@ config PANASONIC_LAPTOP config COMPAL_LAPTOP tristate "Compal Laptop Extras" depends on X86 - depends on ACPI_EC + depends on ACPI depends on BACKLIGHT_CLASS_DEVICE ---help--- This is a driver for laptops built by Compal: @@ -488,4 +498,6 @@ config SGI_GRU_DEBUG This option enables addition debugging code for the SGI GRU driver. If you are unsure, say N. +source "drivers/misc/c2port/Kconfig" + endif # MISC_DEVICES diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 909e2468cdc9..817f7f5ab3bd 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o obj-$(CONFIG_HP_WMI) += hp-wmi.o +obj-$(CONFIG_ICS932S401) += ics932s401.o obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o @@ -31,3 +32,4 @@ obj-$(CONFIG_KGDB_TESTS) += kgdbts.o obj-$(CONFIG_SGI_XP) += sgi-xp/ obj-$(CONFIG_SGI_GRU) += sgi-gru/ obj-$(CONFIG_HP_ILO) += hpilo.o +obj-$(CONFIG_C2PORT) += c2port/ diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index 0532a2de2ce4..94c9f911824e 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -1297,6 +1297,12 @@ static int __init acer_wmi_init(void) set_quirks(); + if (!acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) { + interface->capability &= ~ACER_CAP_BRIGHTNESS; + printk(ACER_INFO "Brightness must be controlled by " + "generic video driver\n"); + } + if (platform_driver_register(&acer_platform_driver)) { printk(ACER_ERR "Unable to register platform driver.\n"); goto error_platform_register; diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c index a9d5228724a6..8fb8b3591048 100644 --- a/drivers/misc/asus-laptop.c +++ b/drivers/misc/asus-laptop.c @@ -1208,9 +1208,13 @@ static int __init asus_laptop_init(void) dev = acpi_get_physical_device(hotk->device->handle); - result = asus_backlight_init(dev); - if (result) - goto fail_backlight; + if (!acpi_video_backlight_support()) { + result = asus_backlight_init(dev); + if (result) + goto fail_backlight; + } else + printk(ASUS_INFO "Brightness ignored, must be controlled by " + "ACPI video driver\n"); result = asus_led_init(dev); if (result) diff --git a/drivers/misc/c2port/Kconfig b/drivers/misc/c2port/Kconfig new file mode 100644 index 000000000000..e46af9a5810d --- /dev/null +++ b/drivers/misc/c2port/Kconfig @@ -0,0 +1,35 @@ +# +# C2 port devices +# + +menuconfig C2PORT + tristate "Silicon Labs C2 port support (EXPERIMENTAL)" + depends on EXPERIMENTAL + default no + help + This option enables support for Silicon Labs C2 port used to + program Silicon micro controller chips (and other 8051 compatible). + + If your board have no such micro controllers you don't need this + interface at all. + + To compile this driver as a module, choose M here: the module will + be called c2port_core. Note that you also need a client module + usually called c2port-*. + + If you are not sure, say N here. + +if C2PORT + +config C2PORT_DURAMAR_2150 + tristate "C2 port support for Eurotech's Duramar 2150 (EXPERIMENTAL)" + depends on X86 && C2PORT + default no + help + This option enables C2 support for the Eurotech's Duramar 2150 + on board micro controller. + + To compile this driver as a module, choose M here: the module will + be called c2port-duramar2150. + +endif # C2PORT diff --git a/drivers/misc/c2port/Makefile b/drivers/misc/c2port/Makefile new file mode 100644 index 000000000000..3b2cf43d60f5 --- /dev/null +++ b/drivers/misc/c2port/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_C2PORT) += core.o + +obj-$(CONFIG_C2PORT_DURAMAR_2150) += c2port-duramar2150.o diff --git a/drivers/misc/c2port/c2port-duramar2150.c b/drivers/misc/c2port/c2port-duramar2150.c new file mode 100644 index 000000000000..338dcc121507 --- /dev/null +++ b/drivers/misc/c2port/c2port-duramar2150.c @@ -0,0 +1,158 @@ +/* + * Silicon Labs C2 port Linux support for Eurotech Duramar 2150 + * + * Copyright (c) 2008 Rodolfo Giometti <giometti@linux.it> + * Copyright (c) 2008 Eurotech S.p.A. <info@eurotech.it> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/c2port.h> + +#define DATA_PORT 0x325 +#define DIR_PORT 0x326 +#define C2D (1 << 0) +#define C2CK (1 << 1) + +static DEFINE_MUTEX(update_lock); + +/* + * C2 port operations + */ + +static void duramar2150_c2port_access(struct c2port_device *dev, int status) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DIR_PORT); + + /* 0 = input, 1 = output */ + if (status) + outb(v | (C2D | C2CK), DIR_PORT); + else + /* When access is "off" is important that both lines are set + * as inputs or hi-impedence */ + outb(v & ~(C2D | C2CK), DIR_PORT); + + mutex_unlock(&update_lock); +} + +static void duramar2150_c2port_c2d_dir(struct c2port_device *dev, int dir) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DIR_PORT); + + if (dir) + outb(v & ~C2D, DIR_PORT); + else + outb(v | C2D, DIR_PORT); + + mutex_unlock(&update_lock); +} + +static int duramar2150_c2port_c2d_get(struct c2port_device *dev) +{ + return inb(DATA_PORT) & C2D; +} + +static void duramar2150_c2port_c2d_set(struct c2port_device *dev, int status) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DATA_PORT); + + if (status) + outb(v | C2D, DATA_PORT); + else + outb(v & ~C2D, DATA_PORT); + + mutex_unlock(&update_lock); +} + +static void duramar2150_c2port_c2ck_set(struct c2port_device *dev, int status) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DATA_PORT); + + if (status) + outb(v | C2CK, DATA_PORT); + else + outb(v & ~C2CK, DATA_PORT); + + mutex_unlock(&update_lock); +} + +static struct c2port_ops duramar2150_c2port_ops = { + .block_size = 512, /* bytes */ + .blocks_num = 30, /* total flash size: 15360 bytes */ + + .access = duramar2150_c2port_access, + .c2d_dir = duramar2150_c2port_c2d_dir, + .c2d_get = duramar2150_c2port_c2d_get, + .c2d_set = duramar2150_c2port_c2d_set, + .c2ck_set = duramar2150_c2port_c2ck_set, +}; + +static struct c2port_device *duramar2150_c2port_dev; + +/* + * Module stuff + */ + +static int __init duramar2150_c2port_init(void) +{ + struct resource *res; + int ret = 0; + + res = request_region(0x325, 2, "c2port"); + if (!res) + return -EBUSY; + + duramar2150_c2port_dev = c2port_device_register("uc", + &duramar2150_c2port_ops, NULL); + if (!duramar2150_c2port_dev) { + ret = -ENODEV; + goto free_region; + } + + return 0; + +free_region: + release_region(0x325, 2); + return ret; +} + +static void __exit duramar2150_c2port_exit(void) +{ + /* Setup the GPIOs as input by default (access = 0) */ + duramar2150_c2port_access(duramar2150_c2port_dev, 0); + + c2port_device_unregister(duramar2150_c2port_dev); + + release_region(0x325, 2); +} + +module_init(duramar2150_c2port_init); +module_exit(duramar2150_c2port_exit); + +MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>"); +MODULE_DESCRIPTION("Silicon Labs C2 port Linux support for Duramar 2150"); +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c new file mode 100644 index 000000000000..0207dd59090d --- /dev/null +++ b/drivers/misc/c2port/core.c @@ -0,0 +1,1003 @@ +/* + * Silicon Labs C2 port core Linux support + * + * Copyright (c) 2007 Rodolfo Giometti <giometti@linux.it> + * Copyright (c) 2007 Eurotech S.p.A. <info@eurotech.it> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/ctype.h> +#include <linux/delay.h> +#include <linux/idr.h> +#include <linux/sched.h> + +#include <linux/c2port.h> + +#define DRIVER_NAME "c2port" +#define DRIVER_VERSION "0.51.0" + +static DEFINE_SPINLOCK(c2port_idr_lock); +static DEFINE_IDR(c2port_idr); + +/* + * Local variables + */ + +static struct class *c2port_class; + +/* + * C2 registers & commands defines + */ + +/* C2 registers */ +#define C2PORT_DEVICEID 0x00 +#define C2PORT_REVID 0x01 +#define C2PORT_FPCTL 0x02 +#define C2PORT_FPDAT 0xB4 + +/* C2 interface commands */ +#define C2PORT_GET_VERSION 0x01 +#define C2PORT_DEVICE_ERASE 0x03 +#define C2PORT_BLOCK_READ 0x06 +#define C2PORT_BLOCK_WRITE 0x07 +#define C2PORT_PAGE_ERASE 0x08 + +/* C2 status return codes */ +#define C2PORT_INVALID_COMMAND 0x00 +#define C2PORT_COMMAND_FAILED 0x02 +#define C2PORT_COMMAND_OK 0x0d + +/* + * C2 port low level signal managements + */ + +static void c2port_reset(struct c2port_device *dev) +{ + struct c2port_ops *ops = dev->ops; + + /* To reset the device we have to keep clock line low for at least + * 20us. + */ + local_irq_disable(); + ops->c2ck_set(dev, 0); + udelay(25); + ops->c2ck_set(dev, 1); + local_irq_enable(); + + udelay(1); +} + +static void c2port_strobe_ck(struct c2port_device *dev) +{ + struct c2port_ops *ops = dev->ops; + + /* During hi-low-hi transition we disable local IRQs to avoid + * interructions since C2 port specification says that it must be + * shorter than 5us, otherwise the microcontroller may consider + * it as a reset signal! + */ + local_irq_disable(); + ops->c2ck_set(dev, 0); + udelay(1); + ops->c2ck_set(dev, 1); + local_irq_enable(); + + udelay(1); +} + +/* + * C2 port basic functions + */ + +static void c2port_write_ar(struct c2port_device *dev, u8 addr) +{ + struct c2port_ops *ops = dev->ops; + int i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (11b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + + /* ADDRESS field */ + for (i = 0; i < 8; i++) { + ops->c2d_set(dev, addr & 0x01); + c2port_strobe_ck(dev); + + addr >>= 1; + } + + /* STOP field */ + ops->c2d_dir(dev, 1); + c2port_strobe_ck(dev); +} + +static int c2port_read_ar(struct c2port_device *dev, u8 *addr) +{ + struct c2port_ops *ops = dev->ops; + int i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (10b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + + /* ADDRESS field */ + ops->c2d_dir(dev, 1); + *addr = 0; + for (i = 0; i < 8; i++) { + *addr >>= 1; /* shift in 8-bit ADDRESS field LSB first */ + + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + *addr |= 0x80; + } + + /* STOP field */ + c2port_strobe_ck(dev); + + return 0; +} + +static int c2port_write_dr(struct c2port_device *dev, u8 data) +{ + struct c2port_ops *ops = dev->ops; + int timeout, i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (01b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* LENGTH field (00b, LSB first -> 1 byte) */ + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* DATA field */ + for (i = 0; i < 8; i++) { + ops->c2d_set(dev, data & 0x01); + c2port_strobe_ck(dev); + + data >>= 1; + } + + /* WAIT field */ + ops->c2d_dir(dev, 1); + timeout = 20; + do { + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + /* STOP field */ + c2port_strobe_ck(dev); + + return 0; +} + +static int c2port_read_dr(struct c2port_device *dev, u8 *data) +{ + struct c2port_ops *ops = dev->ops; + int timeout, i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (00b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* LENGTH field (00b, LSB first -> 1 byte) */ + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* WAIT field */ + ops->c2d_dir(dev, 1); + timeout = 20; + do { + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + /* DATA field */ + *data = 0; + for (i = 0; i < 8; i++) { + *data >>= 1; /* shift in 8-bit DATA field LSB first */ + + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + *data |= 0x80; + } + + /* STOP field */ + c2port_strobe_ck(dev); + + return 0; +} + +static int c2port_poll_in_busy(struct c2port_device *dev) +{ + u8 addr; + int ret, timeout = 20; + + do { + ret = (c2port_read_ar(dev, &addr)); + if (ret < 0) + return -EIO; + + if (!(addr & 0x02)) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + return 0; +} + +static int c2port_poll_out_ready(struct c2port_device *dev) +{ + u8 addr; + int ret, timeout = 10000; /* erase flash needs long time... */ + + do { + ret = (c2port_read_ar(dev, &addr)); + if (ret < 0) + return -EIO; + + if (addr & 0x01) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + return 0; +} + +/* + * sysfs methods + */ + +static ssize_t c2port_show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", c2dev->name); +} + +static ssize_t c2port_show_flash_blocks_num(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + + return sprintf(buf, "%d\n", ops->blocks_num); +} + +static ssize_t c2port_show_flash_block_size(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + + return sprintf(buf, "%d\n", ops->block_size); +} + +static ssize_t c2port_show_flash_size(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + + return sprintf(buf, "%d\n", ops->blocks_num * ops->block_size); +} + +static ssize_t c2port_show_access(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", c2dev->access); +} + +static ssize_t c2port_store_access(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + int status, ret; + + ret = sscanf(buf, "%d", &status); + if (ret != 1) + return -EINVAL; + + mutex_lock(&c2dev->mutex); + + c2dev->access = !!status; + + /* If access is "on" clock should be HIGH _before_ setting the line + * as output and data line should be set as INPUT anyway */ + if (c2dev->access) + ops->c2ck_set(c2dev, 1); + ops->access(c2dev, c2dev->access); + if (c2dev->access) + ops->c2d_dir(c2dev, 1); + + mutex_unlock(&c2dev->mutex); + + return count; +} + +static ssize_t c2port_store_reset(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + /* Check the device access status */ + if (!c2dev->access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + + c2port_reset(c2dev); + c2dev->flash_access = 0; + + mutex_unlock(&c2dev->mutex); + + return count; +} + +static ssize_t __c2port_show_dev_id(struct c2port_device *dev, char *buf) +{ + u8 data; + int ret; + + /* Select DEVICEID register for C2 data register accesses */ + c2port_write_ar(dev, C2PORT_DEVICEID); + + /* Read and return the device ID register */ + ret = c2port_read_dr(dev, &data); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", data); +} + +static ssize_t c2port_show_dev_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + ssize_t ret; + + /* Check the device access status */ + if (!c2dev->access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_show_dev_id(c2dev, buf); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(dev, "cannot read from %s\n", c2dev->name); + + return ret; +} + +static ssize_t __c2port_show_rev_id(struct c2port_device *dev, char *buf) +{ + u8 data; + int ret; + + /* Select REVID register for C2 data register accesses */ + c2port_write_ar(dev, C2PORT_REVID); + + /* Read and return the revision ID register */ + ret = c2port_read_dr(dev, &data); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", data); +} + +static ssize_t c2port_show_rev_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + ssize_t ret; + + /* Check the device access status */ + if (!c2dev->access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_show_rev_id(c2dev, buf); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(c2dev->dev, "cannot read from %s\n", c2dev->name); + + return ret; +} + +static ssize_t c2port_show_flash_access(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", c2dev->flash_access); +} + +static ssize_t __c2port_store_flash_access(struct c2port_device *dev, + int status) +{ + int ret; + + /* Check the device access status */ + if (!dev->access) + return -EBUSY; + + dev->flash_access = !!status; + + /* If flash_access is off we have nothing to do... */ + if (dev->flash_access == 0) + return 0; + + /* Target the C2 flash programming control register for C2 data + * register access */ + c2port_write_ar(dev, C2PORT_FPCTL); + + /* Write the first keycode to enable C2 Flash programming */ + ret = c2port_write_dr(dev, 0x02); + if (ret < 0) + return ret; + + /* Write the second keycode to enable C2 Flash programming */ + ret = c2port_write_dr(dev, 0x01); + if (ret < 0) + return ret; + + /* Delay for at least 20ms to ensure the target is ready for + * C2 flash programming */ + mdelay(25); + + return 0; +} + +static ssize_t c2port_store_flash_access(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + int status; + ssize_t ret; + + ret = sscanf(buf, "%d", &status); + if (ret != 1) + return -EINVAL; + + mutex_lock(&c2dev->mutex); + ret = __c2port_store_flash_access(c2dev, status); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) { + dev_err(c2dev->dev, "cannot enable %s flash programming\n", + c2dev->name); + return ret; + } + + return count; +} + +static ssize_t __c2port_write_flash_erase(struct c2port_device *dev) +{ + u8 status; + int ret; + + /* Target the C2 flash programming data register for C2 data register + * access. + */ + c2port_write_ar(dev, C2PORT_FPDAT); + + /* Send device erase command */ + c2port_write_dr(dev, C2PORT_DEVICE_ERASE); + + /* Wait for input acknowledge */ + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before starting FLASH access sequence */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Send a three-byte arming sequence to enable the device erase. + * If the sequence is not received correctly, the command will be + * ignored. + * Sequence is: 0xde, 0xad, 0xa5. + */ + c2port_write_dr(dev, 0xde); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + c2port_write_dr(dev, 0xad); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + c2port_write_dr(dev, 0xa5); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + return 0; +} + +static ssize_t c2port_store_flash_erase(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + int ret; + + /* Check the device and flash access status */ + if (!c2dev->access || !c2dev->flash_access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_write_flash_erase(c2dev); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) { + dev_err(c2dev->dev, "cannot erase %s flash\n", c2dev->name); + return ret; + } + + return count; +} + +static ssize_t __c2port_read_flash_data(struct c2port_device *dev, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_ops *ops = dev->ops; + u8 status, nread = 128; + int i, ret; + + /* Check for flash end */ + if (offset >= ops->block_size * ops->blocks_num) + return 0; + + if (ops->block_size * ops->blocks_num - offset < nread) + nread = ops->block_size * ops->blocks_num - offset; + if (count < nread) + nread = count; + if (nread == 0) + return nread; + + /* Target the C2 flash programming data register for C2 data register + * access */ + c2port_write_ar(dev, C2PORT_FPDAT); + + /* Send flash block read command */ + c2port_write_dr(dev, C2PORT_BLOCK_READ); + + /* Wait for input acknowledge */ + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before starting FLASH access sequence */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Send address high byte */ + c2port_write_dr(dev, offset >> 8); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address low byte */ + c2port_write_dr(dev, offset & 0x00ff); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address block size */ + c2port_write_dr(dev, nread); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before reading FLASH block */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Read flash block */ + for (i = 0; i < nread; i++) { + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + ret = c2port_read_dr(dev, buffer+i); + if (ret < 0) + return ret; + } + + return nread; +} + +static ssize_t c2port_read_flash_data(struct kobject *kobj, + struct bin_attribute *attr, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_device *c2dev = + dev_get_drvdata(container_of(kobj, + struct device, kobj)); + ssize_t ret; + + /* Check the device and flash access status */ + if (!c2dev->access || !c2dev->flash_access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_read_flash_data(c2dev, buffer, offset, count); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(c2dev->dev, "cannot read %s flash\n", c2dev->name); + + return ret; +} + +static ssize_t __c2port_write_flash_data(struct c2port_device *dev, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_ops *ops = dev->ops; + u8 status, nwrite = 128; + int i, ret; + + if (nwrite > count) + nwrite = count; + if (ops->block_size * ops->blocks_num - offset < nwrite) + nwrite = ops->block_size * ops->blocks_num - offset; + + /* Check for flash end */ + if (offset >= ops->block_size * ops->blocks_num) + return -EINVAL; + + /* Target the C2 flash programming data register for C2 data register + * access */ + c2port_write_ar(dev, C2PORT_FPDAT); + + /* Send flash block write command */ + c2port_write_dr(dev, C2PORT_BLOCK_WRITE); + + /* Wait for input acknowledge */ + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before starting FLASH access sequence */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Send address high byte */ + c2port_write_dr(dev, offset >> 8); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address low byte */ + c2port_write_dr(dev, offset & 0x00ff); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address block size */ + c2port_write_dr(dev, nwrite); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before writing FLASH block */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Write flash block */ + for (i = 0; i < nwrite; i++) { + ret = c2port_write_dr(dev, *(buffer+i)); + if (ret < 0) + return ret; + + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + } + + /* Wait for last flash write to complete */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + return nwrite; +} + +static ssize_t c2port_write_flash_data(struct kobject *kobj, + struct bin_attribute *attr, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_device *c2dev = + dev_get_drvdata(container_of(kobj, + struct device, kobj)); + int ret; + + /* Check the device access status */ + if (!c2dev->access || !c2dev->flash_access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_write_flash_data(c2dev, buffer, offset, count); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(c2dev->dev, "cannot write %s flash\n", c2dev->name); + + return ret; +} + +/* + * Class attributes + */ + +static struct device_attribute c2port_attrs[] = { + __ATTR(name, 0444, c2port_show_name, NULL), + __ATTR(flash_blocks_num, 0444, c2port_show_flash_blocks_num, NULL), + __ATTR(flash_block_size, 0444, c2port_show_flash_block_size, NULL), + __ATTR(flash_size, 0444, c2port_show_flash_size, NULL), + __ATTR(access, 0644, c2port_show_access, c2port_store_access), + __ATTR(reset, 0200, NULL, c2port_store_reset), + __ATTR(dev_id, 0444, c2port_show_dev_id, NULL), + __ATTR(rev_id, 0444, c2port_show_rev_id, NULL), + + __ATTR(flash_access, 0644, c2port_show_flash_access, + c2port_store_flash_access), + __ATTR(flash_erase, 0200, NULL, c2port_store_flash_erase), + __ATTR_NULL, +}; + +static struct bin_attribute c2port_bin_attrs = { + .attr = { + .name = "flash_data", + .mode = 0644 + }, + .read = c2port_read_flash_data, + .write = c2port_write_flash_data, + /* .size is computed at run-time */ +}; + +/* + * Exported functions + */ + +struct c2port_device *c2port_device_register(char *name, + struct c2port_ops *ops, void *devdata) +{ + struct c2port_device *c2dev; + int id, ret; + + if (unlikely(!ops) || unlikely(!ops->access) || \ + unlikely(!ops->c2d_dir) || unlikely(!ops->c2ck_set) || \ + unlikely(!ops->c2d_get) || unlikely(!ops->c2d_set)) + return ERR_PTR(-EINVAL); + + c2dev = kmalloc(sizeof(struct c2port_device), GFP_KERNEL); + if (unlikely(!c2dev)) + return ERR_PTR(-ENOMEM); + + ret = idr_pre_get(&c2port_idr, GFP_KERNEL); + if (!ret) { + ret = -ENOMEM; + goto error_idr_get_new; + } + + spin_lock_irq(&c2port_idr_lock); + ret = idr_get_new(&c2port_idr, c2dev, &id); + spin_unlock_irq(&c2port_idr_lock); + + if (ret < 0) + goto error_idr_get_new; + c2dev->id = id; + + c2dev->dev = device_create(c2port_class, NULL, 0, c2dev, + "c2port%d", id); + if (unlikely(!c2dev->dev)) { + ret = -ENOMEM; + goto error_device_create; + } + dev_set_drvdata(c2dev->dev, c2dev); + + strncpy(c2dev->name, name, C2PORT_NAME_LEN); + c2dev->ops = ops; + mutex_init(&c2dev->mutex); + + /* Create binary file */ + c2port_bin_attrs.size = ops->blocks_num * ops->block_size; + ret = device_create_bin_file(c2dev->dev, &c2port_bin_attrs); + if (unlikely(ret)) + goto error_device_create_bin_file; + + /* By default C2 port access is off */ + c2dev->access = c2dev->flash_access = 0; + ops->access(c2dev, 0); + + dev_info(c2dev->dev, "C2 port %s added\n", name); + dev_info(c2dev->dev, "%s flash has %d blocks x %d bytes " + "(%d bytes total)\n", + name, ops->blocks_num, ops->block_size, + ops->blocks_num * ops->block_size); + + return c2dev; + +error_device_create_bin_file: + device_destroy(c2port_class, 0); + +error_device_create: + spin_lock_irq(&c2port_idr_lock); + idr_remove(&c2port_idr, id); + spin_unlock_irq(&c2port_idr_lock); + +error_idr_get_new: + kfree(c2dev); + + return ERR_PTR(ret); +} +EXPORT_SYMBOL(c2port_device_register); + +void c2port_device_unregister(struct c2port_device *c2dev) +{ + if (!c2dev) + return; + + dev_info(c2dev->dev, "C2 port %s removed\n", c2dev->name); + + device_remove_bin_file(c2dev->dev, &c2port_bin_attrs); + spin_lock_irq(&c2port_idr_lock); + idr_remove(&c2port_idr, c2dev->id); + spin_unlock_irq(&c2port_idr_lock); + + device_destroy(c2port_class, c2dev->id); + + kfree(c2dev); +} +EXPORT_SYMBOL(c2port_device_unregister); + +/* + * Module stuff + */ + +static int __init c2port_init(void) +{ + printk(KERN_INFO "Silicon Labs C2 port support v. " DRIVER_VERSION + " - (C) 2007 Rodolfo Giometti\n"); + + c2port_class = class_create(THIS_MODULE, "c2port"); + if (!c2port_class) { + printk(KERN_ERR "c2port: failed to allocate class\n"); + return -ENOMEM; + } + c2port_class->dev_attrs = c2port_attrs; + + return 0; +} + +static void __exit c2port_exit(void) +{ + class_destroy(c2port_class); +} + +module_init(c2port_init); +module_exit(c2port_exit); + +MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>"); +MODULE_DESCRIPTION("Silicon Labs C2 port support v. " DRIVER_VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/compal-laptop.c b/drivers/misc/compal-laptop.c index 344b790a6253..11003bba10d3 100644 --- a/drivers/misc/compal-laptop.c +++ b/drivers/misc/compal-laptop.c @@ -326,12 +326,14 @@ static int __init compal_init(void) /* Register backlight stuff */ - compalbl_device = backlight_device_register("compal-laptop", NULL, NULL, - &compalbl_ops); - if (IS_ERR(compalbl_device)) - return PTR_ERR(compalbl_device); + if (!acpi_video_backlight_support()) { + compalbl_device = backlight_device_register("compal-laptop", NULL, NULL, + &compalbl_ops); + if (IS_ERR(compalbl_device)) + return PTR_ERR(compalbl_device); - compalbl_device->props.max_brightness = COMPAL_LCD_LEVEL_MAX-1; + compalbl_device->props.max_brightness = COMPAL_LCD_LEVEL_MAX-1; + } ret = platform_driver_register(&compal_driver); if (ret) diff --git a/drivers/misc/eeepc-laptop.c b/drivers/misc/eeepc-laptop.c index 9ef98b2d5039..02fe2b8b8939 100644 --- a/drivers/misc/eeepc-laptop.c +++ b/drivers/misc/eeepc-laptop.c @@ -825,9 +825,15 @@ static int __init eeepc_laptop_init(void) return -ENODEV; } dev = acpi_get_physical_device(ehotk->device->handle); - result = eeepc_backlight_init(dev); - if (result) - goto fail_backlight; + + if (!acpi_video_backlight_support()) { + result = eeepc_backlight_init(dev); + if (result) + goto fail_backlight; + } else + printk(EEEPC_INFO "Backlight controlled by ACPI video " + "driver\n"); + result = eeepc_hwmon_init(dev); if (result) goto fail_hwmon; diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c index d2cf0bfe3163..a7dd3e9fb79d 100644 --- a/drivers/misc/fujitsu-laptop.c +++ b/drivers/misc/fujitsu-laptop.c @@ -464,6 +464,14 @@ static int dmi_check_cb_s6410(const struct dmi_system_id *id) return 0; } +static int dmi_check_cb_s6420(const struct dmi_system_id *id) +{ + dmi_check_cb_common(id); + fujitsu->keycode1 = KEY_SCREENLOCK; /* "Lock" */ + fujitsu->keycode2 = KEY_HELP; /* "Mobility Center" */ + return 0; +} + static int dmi_check_cb_p8010(const struct dmi_system_id *id) { dmi_check_cb_common(id); @@ -473,7 +481,7 @@ static int dmi_check_cb_p8010(const struct dmi_system_id *id) return 0; } -static struct dmi_system_id __initdata fujitsu_dmi_table[] = { +static struct dmi_system_id fujitsu_dmi_table[] = { { .ident = "Fujitsu Siemens S6410", .matches = { @@ -482,6 +490,13 @@ static struct dmi_system_id __initdata fujitsu_dmi_table[] = { }, .callback = dmi_check_cb_s6410}, { + .ident = "Fujitsu Siemens S6420", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6420"), + }, + .callback = dmi_check_cb_s6420}, + { .ident = "Fujitsu LifeBook P8010", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), @@ -990,16 +1005,16 @@ static int __init fujitsu_init(void) /* Register backlight stuff */ - fujitsu->bl_device = - backlight_device_register("fujitsu-laptop", NULL, NULL, - &fujitsubl_ops); - if (IS_ERR(fujitsu->bl_device)) - return PTR_ERR(fujitsu->bl_device); - - max_brightness = fujitsu->max_brightness; - - fujitsu->bl_device->props.max_brightness = max_brightness - 1; - fujitsu->bl_device->props.brightness = fujitsu->brightness_level; + if (!acpi_video_backlight_support()) { + fujitsu->bl_device = + backlight_device_register("fujitsu-laptop", NULL, NULL, + &fujitsubl_ops); + if (IS_ERR(fujitsu->bl_device)) + return PTR_ERR(fujitsu->bl_device); + max_brightness = fujitsu->max_brightness; + fujitsu->bl_device->props.max_brightness = max_brightness - 1; + fujitsu->bl_device->props.brightness = fujitsu->brightness_level; + } ret = platform_driver_register(&fujitsupf_driver); if (ret) @@ -1035,7 +1050,8 @@ fail_hotkey: fail_backlight: - backlight_device_unregister(fujitsu->bl_device); + if (fujitsu->bl_device) + backlight_device_unregister(fujitsu->bl_device); fail_platform_device2: @@ -1062,7 +1078,8 @@ static void __exit fujitsu_cleanup(void) &fujitsupf_attribute_group); platform_device_unregister(fujitsu->pf_device); platform_driver_unregister(&fujitsupf_driver); - backlight_device_unregister(fujitsu->bl_device); + if (fujitsu->bl_device) + backlight_device_unregister(fujitsu->bl_device); acpi_bus_unregister_driver(&acpi_fujitsu_driver); diff --git a/drivers/misc/ics932s401.c b/drivers/misc/ics932s401.c new file mode 100644 index 000000000000..6e43ab4231ae --- /dev/null +++ b/drivers/misc/ics932s401.c @@ -0,0 +1,515 @@ +/* + * A driver for the Integrated Circuits ICS932S401 + * Copyright (C) 2008 IBM + * + * Author: Darrick J. Wong <djwong@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/log2.h> + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(ics932s401); + +/* ICS932S401 registers */ +#define ICS932S401_REG_CFG2 0x01 +#define ICS932S401_CFG1_SPREAD 0x01 +#define ICS932S401_REG_CFG7 0x06 +#define ICS932S401_FS_MASK 0x07 +#define ICS932S401_REG_VENDOR_REV 0x07 +#define ICS932S401_VENDOR 1 +#define ICS932S401_VENDOR_MASK 0x0F +#define ICS932S401_REV 4 +#define ICS932S401_REV_SHIFT 4 +#define ICS932S401_REG_DEVICE 0x09 +#define ICS932S401_DEVICE 11 +#define ICS932S401_REG_CTRL 0x0A +#define ICS932S401_MN_ENABLED 0x80 +#define ICS932S401_CPU_ALT 0x04 +#define ICS932S401_SRC_ALT 0x08 +#define ICS932S401_REG_CPU_M_CTRL 0x0B +#define ICS932S401_M_MASK 0x3F +#define ICS932S401_REG_CPU_N_CTRL 0x0C +#define ICS932S401_REG_CPU_SPREAD1 0x0D +#define ICS932S401_REG_CPU_SPREAD2 0x0E +#define ICS932S401_SPREAD_MASK 0x7FFF +#define ICS932S401_REG_SRC_M_CTRL 0x0F +#define ICS932S401_REG_SRC_N_CTRL 0x10 +#define ICS932S401_REG_SRC_SPREAD1 0x11 +#define ICS932S401_REG_SRC_SPREAD2 0x12 +#define ICS932S401_REG_CPU_DIVISOR 0x13 +#define ICS932S401_CPU_DIVISOR_SHIFT 4 +#define ICS932S401_REG_PCISRC_DIVISOR 0x14 +#define ICS932S401_SRC_DIVISOR_MASK 0x0F +#define ICS932S401_PCI_DIVISOR_SHIFT 4 + +/* Base clock is 14.318MHz */ +#define BASE_CLOCK 14318 + +#define NUM_REGS 21 +#define NUM_MIRRORED_REGS 15 + +static int regs_to_copy[NUM_MIRRORED_REGS] = { + ICS932S401_REG_CFG2, + ICS932S401_REG_CFG7, + ICS932S401_REG_VENDOR_REV, + ICS932S401_REG_DEVICE, + ICS932S401_REG_CTRL, + ICS932S401_REG_CPU_M_CTRL, + ICS932S401_REG_CPU_N_CTRL, + ICS932S401_REG_CPU_SPREAD1, + ICS932S401_REG_CPU_SPREAD2, + ICS932S401_REG_SRC_M_CTRL, + ICS932S401_REG_SRC_N_CTRL, + ICS932S401_REG_SRC_SPREAD1, + ICS932S401_REG_SRC_SPREAD2, + ICS932S401_REG_CPU_DIVISOR, + ICS932S401_REG_PCISRC_DIVISOR, +}; + +/* How often do we reread sensors values? (In jiffies) */ +#define SENSOR_REFRESH_INTERVAL (2 * HZ) + +/* How often do we reread sensor limit values? (In jiffies) */ +#define LIMIT_REFRESH_INTERVAL (60 * HZ) + +struct ics932s401_data { + struct attribute_group attrs; + struct mutex lock; + char sensors_valid; + unsigned long sensors_last_updated; /* In jiffies */ + + u8 regs[NUM_REGS]; +}; + +static int ics932s401_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int ics932s401_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int ics932s401_remove(struct i2c_client *client); + +static const struct i2c_device_id ics932s401_id[] = { + { "ics932s401", ics932s401 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ics932s401_id); + +static struct i2c_driver ics932s401_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "ics932s401", + }, + .probe = ics932s401_probe, + .remove = ics932s401_remove, + .id_table = ics932s401_id, + .detect = ics932s401_detect, + .address_data = &addr_data, +}; + +static struct ics932s401_data *ics932s401_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ics932s401_data *data = i2c_get_clientdata(client); + unsigned long local_jiffies = jiffies; + int i, temp; + + mutex_lock(&data->lock); + if (time_before(local_jiffies, data->sensors_last_updated + + SENSOR_REFRESH_INTERVAL) + && data->sensors_valid) + goto out; + + /* + * Each register must be read as a word and then right shifted 8 bits. + * Not really sure why this is; setting the "byte count programming" + * register to 1 does not fix this problem. + */ + for (i = 0; i < NUM_MIRRORED_REGS; i++) { + temp = i2c_smbus_read_word_data(client, regs_to_copy[i]); + data->regs[regs_to_copy[i]] = temp >> 8; + } + + data->sensors_last_updated = local_jiffies; + data->sensors_valid = 1; + +out: + mutex_unlock(&data->lock); + return data; +} + +static ssize_t show_spread_enabled(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + if (data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD) + return sprintf(buf, "1\n"); + + return sprintf(buf, "0\n"); +} + +/* bit to cpu khz map */ +static const int fs_speeds[] = { + 266666, + 133333, + 200000, + 166666, + 333333, + 100000, + 400000, + 0, +}; + +/* clock divisor map */ +static const int divisors[] = {2, 3, 5, 15, 4, 6, 10, 30, 8, 12, 20, 60, 16, + 24, 40, 120}; + +/* Calculate CPU frequency from the M/N registers. */ +static int calculate_cpu_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_CPU_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_CPU_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_CPU_DIVISOR] >> + ICS932S401_CPU_DIVISOR_SHIFT]; + + return freq; +} + +static ssize_t show_cpu_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_cpu_freq(data)); +} + +static ssize_t show_cpu_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_cpu_freq(data); + else { + /* Freq is neatly wrapped up for us */ + int fid = data->regs[ICS932S401_REG_CFG7] & ICS932S401_FS_MASK; + freq = fs_speeds[fid]; + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT) { + switch (freq) { + case 166666: + freq = 160000; + break; + case 333333: + freq = 320000; + break; + } + } + } + + return sprintf(buf, "%d\n", freq); +} + +/* Calculate SRC frequency from the M/N registers. */ +static int calculate_src_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_SRC_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] & + ICS932S401_SRC_DIVISOR_MASK]; + + return freq; +} + +static ssize_t show_src_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_src_freq(data)); +} + +static ssize_t show_src_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_src_freq(data); + else + /* Freq is neatly wrapped up for us */ + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT && + data->regs[ICS932S401_REG_CTRL] & ICS932S401_SRC_ALT) + freq = 96000; + else + freq = 100000; + + return sprintf(buf, "%d\n", freq); +} + +/* Calculate PCI frequency from the SRC M/N registers. */ +static int calculate_pci_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_SRC_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] >> + ICS932S401_PCI_DIVISOR_SHIFT]; + + return freq; +} + +static ssize_t show_pci_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_pci_freq(data)); +} + +static ssize_t show_pci_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_pci_freq(data); + else + freq = 33333; + + return sprintf(buf, "%d\n", freq); +} + +static ssize_t show_value(struct device *dev, + struct device_attribute *devattr, + char *buf); + +static ssize_t show_spread(struct device *dev, + struct device_attribute *devattr, + char *buf); + +static DEVICE_ATTR(spread_enabled, S_IRUGO, show_spread_enabled, NULL); +static DEVICE_ATTR(cpu_clock_selection, S_IRUGO, show_cpu_clock_sel, NULL); +static DEVICE_ATTR(cpu_clock, S_IRUGO, show_cpu_clock, NULL); +static DEVICE_ATTR(src_clock_selection, S_IRUGO, show_src_clock_sel, NULL); +static DEVICE_ATTR(src_clock, S_IRUGO, show_src_clock, NULL); +static DEVICE_ATTR(pci_clock_selection, S_IRUGO, show_pci_clock_sel, NULL); +static DEVICE_ATTR(pci_clock, S_IRUGO, show_pci_clock, NULL); +static DEVICE_ATTR(usb_clock, S_IRUGO, show_value, NULL); +static DEVICE_ATTR(ref_clock, S_IRUGO, show_value, NULL); +static DEVICE_ATTR(cpu_spread, S_IRUGO, show_spread, NULL); +static DEVICE_ATTR(src_spread, S_IRUGO, show_spread, NULL); + +static struct attribute *ics932s401_attr[] = +{ + &dev_attr_spread_enabled.attr, + &dev_attr_cpu_clock_selection.attr, + &dev_attr_cpu_clock.attr, + &dev_attr_src_clock_selection.attr, + &dev_attr_src_clock.attr, + &dev_attr_pci_clock_selection.attr, + &dev_attr_pci_clock.attr, + &dev_attr_usb_clock.attr, + &dev_attr_ref_clock.attr, + &dev_attr_cpu_spread.attr, + &dev_attr_src_spread.attr, + NULL +}; + +static ssize_t show_value(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int x; + + if (devattr == &dev_attr_usb_clock) + x = 48000; + else if (devattr == &dev_attr_ref_clock) + x = BASE_CLOCK; + else + BUG(); + + return sprintf(buf, "%d\n", x); +} + +static ssize_t show_spread(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int reg; + unsigned long val; + + if (!(data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD)) + return sprintf(buf, "0%%\n"); + + if (devattr == &dev_attr_src_spread) + reg = ICS932S401_REG_SRC_SPREAD1; + else if (devattr == &dev_attr_cpu_spread) + reg = ICS932S401_REG_CPU_SPREAD1; + else + BUG(); + + val = data->regs[reg] | (data->regs[reg + 1] << 8); + val &= ICS932S401_SPREAD_MASK; + + /* Scale 0..2^14 to -0.5. */ + val = 500000 * val / 16384; + return sprintf(buf, "-0.%lu%%\n", val); +} + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int ics932s401_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (kind <= 0) { + int vendor, device, revision; + + vendor = i2c_smbus_read_word_data(client, + ICS932S401_REG_VENDOR_REV); + vendor >>= 8; + revision = vendor >> ICS932S401_REV_SHIFT; + vendor &= ICS932S401_VENDOR_MASK; + if (vendor != ICS932S401_VENDOR) + return -ENODEV; + + device = i2c_smbus_read_word_data(client, + ICS932S401_REG_DEVICE); + device >>= 8; + if (device != ICS932S401_DEVICE) + return -ENODEV; + + if (revision != ICS932S401_REV) + dev_info(&adapter->dev, "Unknown revision %d\n", + revision); + } else + dev_dbg(&adapter->dev, "detection forced\n"); + + strlcpy(info->type, "ics932s401", I2C_NAME_SIZE); + + return 0; +} + +static int ics932s401_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ics932s401_data *data; + int err; + + data = kzalloc(sizeof(struct ics932s401_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "%s chip found\n", client->name); + + /* Register sysfs hooks */ + data->attrs.attrs = ics932s401_attr; + err = sysfs_create_group(&client->dev.kobj, &data->attrs); + if (err) + goto exit_free; + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +static int ics932s401_remove(struct i2c_client *client) +{ + struct ics932s401_data *data = i2c_get_clientdata(client); + + sysfs_remove_group(&client->dev.kobj, &data->attrs); + kfree(data); + return 0; +} + +static int __init ics932s401_init(void) +{ + return i2c_add_driver(&ics932s401_driver); +} + +static void __exit ics932s401_exit(void) +{ + i2c_del_driver(&ics932s401_driver); +} + +MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>"); +MODULE_DESCRIPTION("ICS932S401 driver"); +MODULE_LICENSE("GPL"); + +module_init(ics932s401_init); +module_exit(ics932s401_exit); + +/* IBM IntelliStation Z30 */ +MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*"); +MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*"); + +/* IBM x3650/x3550 */ +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*"); diff --git a/drivers/misc/intel_menlow.c b/drivers/misc/intel_menlow.c index e00a2756e97e..27b7662955bb 100644 --- a/drivers/misc/intel_menlow.c +++ b/drivers/misc/intel_menlow.c @@ -52,6 +52,11 @@ MODULE_LICENSE("GPL"); #define MEMORY_ARG_CUR_BANDWIDTH 1 #define MEMORY_ARG_MAX_BANDWIDTH 0 +/* + * GTHS returning 'n' would mean that [0,n-1] states are supported + * In that case max_cstate would be n-1 + * GTHS returning '0' would mean that no bandwidth control states are supported + */ static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev, unsigned long *max_state) { @@ -71,6 +76,9 @@ static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev, if (ACPI_FAILURE(status)) return -EFAULT; + if (!value) + return -EINVAL; + *max_state = value - 1; return 0; } @@ -121,7 +129,7 @@ static int memory_set_cur_bandwidth(struct thermal_cooling_device *cdev, if (memory_get_int_max_bandwidth(cdev, &max_state)) return -EFAULT; - if (max_state < 0 || state > max_state) + if (state > max_state) return -EINVAL; arg_list.count = 1; diff --git a/drivers/misc/msi-laptop.c b/drivers/misc/msi-laptop.c index de898c6938f3..759763d18e4c 100644 --- a/drivers/misc/msi-laptop.c +++ b/drivers/misc/msi-laptop.c @@ -347,12 +347,16 @@ static int __init msi_init(void) /* Register backlight stuff */ - msibl_device = backlight_device_register("msi-laptop-bl", NULL, NULL, - &msibl_ops); - if (IS_ERR(msibl_device)) - return PTR_ERR(msibl_device); - - msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1; + if (acpi_video_backlight_support()) { + printk(KERN_INFO "MSI: Brightness ignored, must be controlled " + "by ACPI video driver\n"); + } else { + msibl_device = backlight_device_register("msi-laptop-bl", NULL, + NULL, &msibl_ops); + if (IS_ERR(msibl_device)) + return PTR_ERR(msibl_device); + msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1; + } ret = platform_driver_register(&msipf_driver); if (ret) diff --git a/drivers/misc/sgi-gru/Makefile b/drivers/misc/sgi-gru/Makefile index d03597a521b0..9e9170b3599a 100644 --- a/drivers/misc/sgi-gru/Makefile +++ b/drivers/misc/sgi-gru/Makefile @@ -1,3 +1,7 @@ +ifdef CONFIG_SGI_GRU_DEBUG + EXTRA_CFLAGS += -DDEBUG +endif + obj-$(CONFIG_SGI_GRU) := gru.o gru-y := grufile.o grumain.o grufault.o grutlbpurge.o gruprocfs.o grukservices.o diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c index 8c389d606c30..3ee698ad8599 100644 --- a/drivers/misc/sgi-gru/grufault.c +++ b/drivers/misc/sgi-gru/grufault.c @@ -254,7 +254,11 @@ static int atomic_pte_lookup(struct vm_area_struct *vma, unsigned long vaddr, return 1; *paddr = pte_pfn(pte) << PAGE_SHIFT; +#ifdef CONFIG_HUGETLB_PAGE *pageshift = is_vm_hugetlb_page(vma) ? HPAGE_SHIFT : PAGE_SHIFT; +#else + *pageshift = PAGE_SHIFT; +#endif return 0; err: diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 5c027b6b4e5a..650983806392 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -481,7 +481,7 @@ struct vm_operations_struct gru_vm_ops = { .fault = gru_fault, }; -module_init(gru_init); +fs_initcall(gru_init); module_exit(gru_exit); module_param(gru_options, ulong, 0644); diff --git a/drivers/misc/sgi-gru/gruprocfs.c b/drivers/misc/sgi-gru/gruprocfs.c index 533923f83f1a..73b0ca061bb5 100644 --- a/drivers/misc/sgi-gru/gruprocfs.c +++ b/drivers/misc/sgi-gru/gruprocfs.c @@ -317,7 +317,6 @@ int gru_proc_init(void) { struct proc_entry *p; - proc_mkdir("sgi_uv", NULL); proc_gru = proc_mkdir("sgi_uv/gru", NULL); for (p = proc_files; p->name; p++) diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index ed1722e50049..7b4cbd5e03e9 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -194,9 +194,10 @@ enum xp_retval { xpGruSendMqError, /* 59: gru send message queue related error */ xpBadChannelNumber, /* 60: invalid channel number */ - xpBadMsgType, /* 60: invalid message type */ + xpBadMsgType, /* 61: invalid message type */ + xpBiosError, /* 62: BIOS error */ - xpUnknownReason /* 61: unknown reason - must be last in enum */ + xpUnknownReason /* 63: unknown reason - must be last in enum */ }; /* @@ -345,6 +346,8 @@ extern unsigned long (*xp_pa) (void *); extern enum xp_retval (*xp_remote_memcpy) (unsigned long, const unsigned long, size_t); extern int (*xp_cpu_to_nasid) (int); +extern enum xp_retval (*xp_expand_memprotect) (unsigned long, unsigned long); +extern enum xp_retval (*xp_restrict_memprotect) (unsigned long, unsigned long); extern u64 xp_nofault_PIOR_target; extern int xp_nofault_PIOR(void *); diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c index 66a1d19e08ad..9a2e77172d94 100644 --- a/drivers/misc/sgi-xp/xp_main.c +++ b/drivers/misc/sgi-xp/xp_main.c @@ -51,6 +51,13 @@ EXPORT_SYMBOL_GPL(xp_remote_memcpy); int (*xp_cpu_to_nasid) (int cpuid); EXPORT_SYMBOL_GPL(xp_cpu_to_nasid); +enum xp_retval (*xp_expand_memprotect) (unsigned long phys_addr, + unsigned long size); +EXPORT_SYMBOL_GPL(xp_expand_memprotect); +enum xp_retval (*xp_restrict_memprotect) (unsigned long phys_addr, + unsigned long size); +EXPORT_SYMBOL_GPL(xp_restrict_memprotect); + /* * xpc_registrations[] keeps track of xpc_connect()'s done by the kernel-level * users of XPC. diff --git a/drivers/misc/sgi-xp/xp_sn2.c b/drivers/misc/sgi-xp/xp_sn2.c index 1440134caf31..fb3ec9d735a9 100644 --- a/drivers/misc/sgi-xp/xp_sn2.c +++ b/drivers/misc/sgi-xp/xp_sn2.c @@ -120,6 +120,38 @@ xp_cpu_to_nasid_sn2(int cpuid) return cpuid_to_nasid(cpuid); } +static enum xp_retval +xp_expand_memprotect_sn2(unsigned long phys_addr, unsigned long size) +{ + u64 nasid_array = 0; + int ret; + + ret = sn_change_memprotect(phys_addr, size, SN_MEMPROT_ACCESS_CLASS_1, + &nasid_array); + if (ret != 0) { + dev_err(xp, "sn_change_memprotect(,, " + "SN_MEMPROT_ACCESS_CLASS_1,) failed ret=%d\n", ret); + return xpSalError; + } + return xpSuccess; +} + +static enum xp_retval +xp_restrict_memprotect_sn2(unsigned long phys_addr, unsigned long size) +{ + u64 nasid_array = 0; + int ret; + + ret = sn_change_memprotect(phys_addr, size, SN_MEMPROT_ACCESS_CLASS_0, + &nasid_array); + if (ret != 0) { + dev_err(xp, "sn_change_memprotect(,, " + "SN_MEMPROT_ACCESS_CLASS_0,) failed ret=%d\n", ret); + return xpSalError; + } + return xpSuccess; +} + enum xp_retval xp_init_sn2(void) { @@ -132,6 +164,8 @@ xp_init_sn2(void) xp_pa = xp_pa_sn2; xp_remote_memcpy = xp_remote_memcpy_sn2; xp_cpu_to_nasid = xp_cpu_to_nasid_sn2; + xp_expand_memprotect = xp_expand_memprotect_sn2; + xp_restrict_memprotect = xp_restrict_memprotect_sn2; return xp_register_nofault_code_sn2(); } diff --git a/drivers/misc/sgi-xp/xp_uv.c b/drivers/misc/sgi-xp/xp_uv.c index d9f7ce2510bc..d238576b26fa 100644 --- a/drivers/misc/sgi-xp/xp_uv.c +++ b/drivers/misc/sgi-xp/xp_uv.c @@ -15,6 +15,11 @@ #include <linux/device.h> #include <asm/uv/uv_hub.h> +#if defined CONFIG_X86_64 +#include <asm/uv/bios.h> +#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV +#include <asm/sn/sn_sal.h> +#endif #include "../sgi-gru/grukservices.h" #include "xp.h" @@ -49,18 +54,79 @@ xp_cpu_to_nasid_uv(int cpuid) return UV_PNODE_TO_NASID(uv_cpu_to_pnode(cpuid)); } +static enum xp_retval +xp_expand_memprotect_uv(unsigned long phys_addr, unsigned long size) +{ + int ret; + +#if defined CONFIG_X86_64 + ret = uv_bios_change_memprotect(phys_addr, size, UV_MEMPROT_ALLOW_RW); + if (ret != BIOS_STATUS_SUCCESS) { + dev_err(xp, "uv_bios_change_memprotect(,, " + "UV_MEMPROT_ALLOW_RW) failed, ret=%d\n", ret); + return xpBiosError; + } + +#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV + u64 nasid_array; + + ret = sn_change_memprotect(phys_addr, size, SN_MEMPROT_ACCESS_CLASS_1, + &nasid_array); + if (ret != 0) { + dev_err(xp, "sn_change_memprotect(,, " + "SN_MEMPROT_ACCESS_CLASS_1,) failed ret=%d\n", ret); + return xpSalError; + } +#else + #error not a supported configuration +#endif + return xpSuccess; +} + +static enum xp_retval +xp_restrict_memprotect_uv(unsigned long phys_addr, unsigned long size) +{ + int ret; + +#if defined CONFIG_X86_64 + ret = uv_bios_change_memprotect(phys_addr, size, + UV_MEMPROT_RESTRICT_ACCESS); + if (ret != BIOS_STATUS_SUCCESS) { + dev_err(xp, "uv_bios_change_memprotect(,, " + "UV_MEMPROT_RESTRICT_ACCESS) failed, ret=%d\n", ret); + return xpBiosError; + } + +#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV + u64 nasid_array; + + ret = sn_change_memprotect(phys_addr, size, SN_MEMPROT_ACCESS_CLASS_0, + &nasid_array); + if (ret != 0) { + dev_err(xp, "sn_change_memprotect(,, " + "SN_MEMPROT_ACCESS_CLASS_0,) failed ret=%d\n", ret); + return xpSalError; + } +#else + #error not a supported configuration +#endif + return xpSuccess; +} + enum xp_retval xp_init_uv(void) { BUG_ON(!is_uv()); xp_max_npartitions = XP_MAX_NPARTITIONS_UV; - xp_partition_id = 0; /* !!! not correct value */ - xp_region_size = 0; /* !!! not correct value */ + xp_partition_id = sn_partition_id; + xp_region_size = sn_region_size; xp_pa = xp_pa_uv; xp_remote_memcpy = xp_remote_memcpy_uv; xp_cpu_to_nasid = xp_cpu_to_nasid_uv; + xp_expand_memprotect = xp_expand_memprotect_uv; + xp_restrict_memprotect = xp_restrict_memprotect_uv; return xpSuccess; } diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index 619208d61862..a5bd658c2e83 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -181,6 +181,18 @@ struct xpc_vars_part_sn2 { xpc_nasid_mask_nlongs)) /* + * Info pertinent to a GRU message queue using a watch list for irq generation. + */ +struct xpc_gru_mq_uv { + void *address; /* address of GRU message queue */ + unsigned int order; /* size of GRU message queue as a power of 2 */ + int irq; /* irq raised when message is received in mq */ + int mmr_blade; /* blade where watchlist was allocated from */ + unsigned long mmr_offset; /* offset of irq mmr located on mmr_blade */ + int watchlist_num; /* number of watchlist allocatd by BIOS */ +}; + +/* * The activate_mq is used to send/receive GRU messages that affect XPC's * heartbeat, partition active state, and channel state. This is UV only. */ diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index b4882ccf6344..73b7fb8de47a 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -553,22 +553,17 @@ static u64 xpc_prot_vec_sn2[MAX_NUMNODES]; static enum xp_retval xpc_allow_amo_ops_sn2(struct amo *amos_page) { - u64 nasid_array = 0; - int ret; + enum xp_retval ret = xpSuccess; /* * On SHUB 1.1, we cannot call sn_change_memprotect() since the BIST * collides with memory operations. On those systems we call * xpc_allow_amo_ops_shub_wars_1_1_sn2() instead. */ - if (!enable_shub_wars_1_1()) { - ret = sn_change_memprotect(ia64_tpa((u64)amos_page), PAGE_SIZE, - SN_MEMPROT_ACCESS_CLASS_1, - &nasid_array); - if (ret != 0) - return xpSalError; - } - return xpSuccess; + if (!enable_shub_wars_1_1()) + ret = xp_expand_memprotect(ia64_tpa((u64)amos_page), PAGE_SIZE); + + return ret; } /* diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 1ac694c01623..91a55b1b1037 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -18,7 +18,15 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/device.h> +#include <linux/err.h> #include <asm/uv/uv_hub.h> +#if defined CONFIG_X86_64 +#include <asm/uv/bios.h> +#include <asm/uv/uv_irq.h> +#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV +#include <asm/sn/intr.h> +#include <asm/sn/sn_sal.h> +#endif #include "../sgi-gru/gru.h" #include "../sgi-gru/grukservices.h" #include "xpc.h" @@ -27,15 +35,17 @@ static atomic64_t xpc_heartbeat_uv; static DECLARE_BITMAP(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV); #define XPC_ACTIVATE_MSG_SIZE_UV (1 * GRU_CACHE_LINE_BYTES) -#define XPC_NOTIFY_MSG_SIZE_UV (2 * GRU_CACHE_LINE_BYTES) +#define XPC_ACTIVATE_MQ_SIZE_UV (4 * XP_MAX_NPARTITIONS_UV * \ + XPC_ACTIVATE_MSG_SIZE_UV) +#define XPC_ACTIVATE_IRQ_NAME "xpc_activate" -#define XPC_ACTIVATE_MQ_SIZE_UV (4 * XP_MAX_NPARTITIONS_UV * \ - XPC_ACTIVATE_MSG_SIZE_UV) -#define XPC_NOTIFY_MQ_SIZE_UV (4 * XP_MAX_NPARTITIONS_UV * \ - XPC_NOTIFY_MSG_SIZE_UV) +#define XPC_NOTIFY_MSG_SIZE_UV (2 * GRU_CACHE_LINE_BYTES) +#define XPC_NOTIFY_MQ_SIZE_UV (4 * XP_MAX_NPARTITIONS_UV * \ + XPC_NOTIFY_MSG_SIZE_UV) +#define XPC_NOTIFY_IRQ_NAME "xpc_notify" -static void *xpc_activate_mq_uv; -static void *xpc_notify_mq_uv; +static struct xpc_gru_mq_uv *xpc_activate_mq_uv; +static struct xpc_gru_mq_uv *xpc_notify_mq_uv; static int xpc_setup_partitions_sn_uv(void) @@ -52,62 +62,209 @@ xpc_setup_partitions_sn_uv(void) return 0; } -static void * -xpc_create_gru_mq_uv(unsigned int mq_size, int cpuid, unsigned int irq, +static int +xpc_get_gru_mq_irq_uv(struct xpc_gru_mq_uv *mq, int cpu, char *irq_name) +{ +#if defined CONFIG_X86_64 + mq->irq = uv_setup_irq(irq_name, cpu, mq->mmr_blade, mq->mmr_offset); + if (mq->irq < 0) { + dev_err(xpc_part, "uv_setup_irq() returned error=%d\n", + mq->irq); + } + +#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV + int mmr_pnode; + unsigned long mmr_value; + + if (strcmp(irq_name, XPC_ACTIVATE_IRQ_NAME) == 0) + mq->irq = SGI_XPC_ACTIVATE; + else if (strcmp(irq_name, XPC_NOTIFY_IRQ_NAME) == 0) + mq->irq = SGI_XPC_NOTIFY; + else + return -EINVAL; + + mmr_pnode = uv_blade_to_pnode(mq->mmr_blade); + mmr_value = (unsigned long)cpu_physical_id(cpu) << 32 | mq->irq; + + uv_write_global_mmr64(mmr_pnode, mq->mmr_offset, mmr_value); +#else + #error not a supported configuration +#endif + + return 0; +} + +static void +xpc_release_gru_mq_irq_uv(struct xpc_gru_mq_uv *mq) +{ +#if defined CONFIG_X86_64 + uv_teardown_irq(mq->irq, mq->mmr_blade, mq->mmr_offset); + +#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV + int mmr_pnode; + unsigned long mmr_value; + + mmr_pnode = uv_blade_to_pnode(mq->mmr_blade); + mmr_value = 1UL << 16; + + uv_write_global_mmr64(mmr_pnode, mq->mmr_offset, mmr_value); +#else + #error not a supported configuration +#endif +} + +static int +xpc_gru_mq_watchlist_alloc_uv(struct xpc_gru_mq_uv *mq) +{ + int ret; + +#if defined CONFIG_X86_64 + ret = uv_bios_mq_watchlist_alloc(mq->mmr_blade, uv_gpa(mq->address), + mq->order, &mq->mmr_offset); + if (ret < 0) { + dev_err(xpc_part, "uv_bios_mq_watchlist_alloc() failed, " + "ret=%d\n", ret); + return ret; + } +#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV + ret = sn_mq_watchlist_alloc(mq->mmr_blade, uv_gpa(mq->address), + mq->order, &mq->mmr_offset); + if (ret < 0) { + dev_err(xpc_part, "sn_mq_watchlist_alloc() failed, ret=%d\n", + ret); + return -EBUSY; + } +#else + #error not a supported configuration +#endif + + mq->watchlist_num = ret; + return 0; +} + +static void +xpc_gru_mq_watchlist_free_uv(struct xpc_gru_mq_uv *mq) +{ + int ret; + +#if defined CONFIG_X86_64 + ret = uv_bios_mq_watchlist_free(mq->mmr_blade, mq->watchlist_num); + BUG_ON(ret != BIOS_STATUS_SUCCESS); +#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV + ret = sn_mq_watchlist_free(mq->mmr_blade, mq->watchlist_num); + BUG_ON(ret != SALRET_OK); +#else + #error not a supported configuration +#endif +} + +static struct xpc_gru_mq_uv * +xpc_create_gru_mq_uv(unsigned int mq_size, int cpu, char *irq_name, irq_handler_t irq_handler) { + enum xp_retval xp_ret; int ret; int nid; - int mq_order; + int pg_order; struct page *page; - void *mq; + struct xpc_gru_mq_uv *mq; + + mq = kmalloc(sizeof(struct xpc_gru_mq_uv), GFP_KERNEL); + if (mq == NULL) { + dev_err(xpc_part, "xpc_create_gru_mq_uv() failed to kmalloc() " + "a xpc_gru_mq_uv structure\n"); + ret = -ENOMEM; + goto out_1; + } + + pg_order = get_order(mq_size); + mq->order = pg_order + PAGE_SHIFT; + mq_size = 1UL << mq->order; + + mq->mmr_blade = uv_cpu_to_blade_id(cpu); - nid = cpu_to_node(cpuid); - mq_order = get_order(mq_size); + nid = cpu_to_node(cpu); page = alloc_pages_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE, - mq_order); + pg_order); if (page == NULL) { dev_err(xpc_part, "xpc_create_gru_mq_uv() failed to alloc %d " "bytes of memory on nid=%d for GRU mq\n", mq_size, nid); - return NULL; + ret = -ENOMEM; + goto out_2; } + mq->address = page_address(page); - mq = page_address(page); - ret = gru_create_message_queue(mq, mq_size); + ret = gru_create_message_queue(mq->address, mq_size); if (ret != 0) { dev_err(xpc_part, "gru_create_message_queue() returned " "error=%d\n", ret); - free_pages((unsigned long)mq, mq_order); - return NULL; + ret = -EINVAL; + goto out_3; } - /* !!! Need to do some other things to set up IRQ */ + /* enable generation of irq when GRU mq operation occurs to this mq */ + ret = xpc_gru_mq_watchlist_alloc_uv(mq); + if (ret != 0) + goto out_3; - ret = request_irq(irq, irq_handler, 0, "xpc", NULL); + ret = xpc_get_gru_mq_irq_uv(mq, cpu, irq_name); + if (ret != 0) + goto out_4; + + ret = request_irq(mq->irq, irq_handler, 0, irq_name, NULL); if (ret != 0) { dev_err(xpc_part, "request_irq(irq=%d) returned error=%d\n", - irq, ret); - free_pages((unsigned long)mq, mq_order); - return NULL; + mq->irq, ret); + goto out_5; } - /* !!! enable generation of irq when GRU mq op occurs to this mq */ - - /* ??? allow other partitions to access GRU mq? */ + /* allow other partitions to access this GRU mq */ + xp_ret = xp_expand_memprotect(xp_pa(mq->address), mq_size); + if (xp_ret != xpSuccess) { + ret = -EACCES; + goto out_6; + } return mq; + + /* something went wrong */ +out_6: + free_irq(mq->irq, NULL); +out_5: + xpc_release_gru_mq_irq_uv(mq); +out_4: + xpc_gru_mq_watchlist_free_uv(mq); +out_3: + free_pages((unsigned long)mq->address, pg_order); +out_2: + kfree(mq); +out_1: + return ERR_PTR(ret); } static void -xpc_destroy_gru_mq_uv(void *mq, unsigned int mq_size, unsigned int irq) +xpc_destroy_gru_mq_uv(struct xpc_gru_mq_uv *mq) { - /* ??? disallow other partitions to access GRU mq? */ + unsigned int mq_size; + int pg_order; + int ret; + + /* disallow other partitions to access GRU mq */ + mq_size = 1UL << mq->order; + ret = xp_restrict_memprotect(xp_pa(mq->address), mq_size); + BUG_ON(ret != xpSuccess); - /* !!! disable generation of irq when GRU mq op occurs to this mq */ + /* unregister irq handler and release mq irq/vector mapping */ + free_irq(mq->irq, NULL); + xpc_release_gru_mq_irq_uv(mq); - free_irq(irq, NULL); + /* disable generation of irq when GRU mq op occurs to this mq */ + xpc_gru_mq_watchlist_free_uv(mq); - free_pages((unsigned long)mq, get_order(mq_size)); + pg_order = mq->order - PAGE_SHIFT; + free_pages((unsigned long)mq->address, pg_order); + + kfree(mq); } static enum xp_retval @@ -402,7 +559,10 @@ xpc_handle_activate_IRQ_uv(int irq, void *dev_id) struct xpc_partition *part; int wakeup_hb_checker = 0; - while ((msg_hdr = gru_get_next_message(xpc_activate_mq_uv)) != NULL) { + while (1) { + msg_hdr = gru_get_next_message(xpc_activate_mq_uv->address); + if (msg_hdr == NULL) + break; partid = msg_hdr->partid; if (partid < 0 || partid >= XP_MAX_NPARTITIONS_UV) { @@ -418,7 +578,7 @@ xpc_handle_activate_IRQ_uv(int irq, void *dev_id) } } - gru_free_message(xpc_activate_mq_uv, msg_hdr); + gru_free_message(xpc_activate_mq_uv->address, msg_hdr); } if (wakeup_hb_checker) @@ -482,7 +642,7 @@ xpc_send_local_activate_IRQ_uv(struct xpc_partition *part, int act_state_req) struct xpc_partition_uv *part_uv = &part->sn.uv; /* - * !!! Make our side think that the remote parition sent an activate + * !!! Make our side think that the remote partition sent an activate * !!! message our way by doing what the activate IRQ handler would * !!! do had one really been sent. */ @@ -500,14 +660,39 @@ static enum xp_retval xpc_get_partition_rsvd_page_pa_uv(void *buf, u64 *cookie, unsigned long *rp_pa, size_t *len) { - /* !!! call the UV version of sn_partition_reserved_page_pa() */ - return xpUnsupported; + s64 status; + enum xp_retval ret; + +#if defined CONFIG_X86_64 + status = uv_bios_reserved_page_pa((u64)buf, cookie, (u64 *)rp_pa, + (u64 *)len); + if (status == BIOS_STATUS_SUCCESS) + ret = xpSuccess; + else if (status == BIOS_STATUS_MORE_PASSES) + ret = xpNeedMoreInfo; + else + ret = xpBiosError; + +#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV + status = sn_partition_reserved_page_pa((u64)buf, cookie, rp_pa, len); + if (status == SALRET_OK) + ret = xpSuccess; + else if (status == SALRET_MORE_PASSES) + ret = xpNeedMoreInfo; + else + ret = xpSalError; + +#else + #error not a supported configuration +#endif + + return ret; } static int xpc_setup_rsvd_page_sn_uv(struct xpc_rsvd_page *rp) { - rp->sn.activate_mq_gpa = uv_gpa(xpc_activate_mq_uv); + rp->sn.activate_mq_gpa = uv_gpa(xpc_activate_mq_uv->address); return 0; } @@ -1411,22 +1596,18 @@ xpc_init_uv(void) return -E2BIG; } - /* ??? The cpuid argument's value is 0, is that what we want? */ - /* !!! The irq argument's value isn't correct. */ - xpc_activate_mq_uv = xpc_create_gru_mq_uv(XPC_ACTIVATE_MQ_SIZE_UV, 0, 0, + xpc_activate_mq_uv = xpc_create_gru_mq_uv(XPC_ACTIVATE_MQ_SIZE_UV, 0, + XPC_ACTIVATE_IRQ_NAME, xpc_handle_activate_IRQ_uv); - if (xpc_activate_mq_uv == NULL) - return -ENOMEM; + if (IS_ERR(xpc_activate_mq_uv)) + return PTR_ERR(xpc_activate_mq_uv); - /* ??? The cpuid argument's value is 0, is that what we want? */ - /* !!! The irq argument's value isn't correct. */ - xpc_notify_mq_uv = xpc_create_gru_mq_uv(XPC_NOTIFY_MQ_SIZE_UV, 0, 0, + xpc_notify_mq_uv = xpc_create_gru_mq_uv(XPC_NOTIFY_MQ_SIZE_UV, 0, + XPC_NOTIFY_IRQ_NAME, xpc_handle_notify_IRQ_uv); - if (xpc_notify_mq_uv == NULL) { - /* !!! The irq argument's value isn't correct. */ - xpc_destroy_gru_mq_uv(xpc_activate_mq_uv, - XPC_ACTIVATE_MQ_SIZE_UV, 0); - return -ENOMEM; + if (IS_ERR(xpc_notify_mq_uv)) { + xpc_destroy_gru_mq_uv(xpc_activate_mq_uv); + return PTR_ERR(xpc_notify_mq_uv); } return 0; @@ -1435,9 +1616,6 @@ xpc_init_uv(void) void xpc_exit_uv(void) { - /* !!! The irq argument's value isn't correct. */ - xpc_destroy_gru_mq_uv(xpc_notify_mq_uv, XPC_NOTIFY_MQ_SIZE_UV, 0); - - /* !!! The irq argument's value isn't correct. */ - xpc_destroy_gru_mq_uv(xpc_activate_mq_uv, XPC_ACTIVATE_MQ_SIZE_UV, 0); + xpc_destroy_gru_mq_uv(xpc_notify_mq_uv); + xpc_destroy_gru_mq_uv(xpc_activate_mq_uv); } diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 06f07e19dc70..571b211608d1 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -1038,7 +1038,11 @@ static int sony_nc_add(struct acpi_device *device) goto outinput; } - if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT", &handle))) { + if (acpi_video_backlight_support()) { + printk(KERN_INFO DRV_PFX "brightness ignored, must be " + "controlled by ACPI video driver\n"); + } else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT", + &handle))) { sony_backlight_device = backlight_device_register("sony", NULL, NULL, &sony_backlight_ops); diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 4db1cf9078d9..899766e16fa8 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -4932,16 +4932,25 @@ static int __init brightness_init(struct ibm_init_struct *iibm) */ b = tpacpi_check_std_acpi_brightness_support(); if (b > 0) { - if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) { - printk(TPACPI_NOTICE - "Lenovo BIOS switched to ACPI backlight " - "control mode\n"); - } - if (brightness_enable > 1) { - printk(TPACPI_NOTICE - "standard ACPI backlight interface " - "available, not loading native one...\n"); - return 1; + + if (acpi_video_backlight_support()) { + if (brightness_enable > 1) { + printk(TPACPI_NOTICE + "Standard ACPI backlight interface " + "available, not loading native one.\n"); + return 1; + } else if (brightness_enable == 1) { + printk(TPACPI_NOTICE + "Backlight control force enabled, even if standard " + "ACPI backlight interface is available\n"); + } + } else { + if (brightness_enable > 1) { + printk(TPACPI_NOTICE + "Standard ACPI backlight interface not " + "available, thinkpad_acpi native " + "brightness control enabled\n"); + } } } @@ -5309,6 +5318,7 @@ static enum fan_control_commands fan_control_commands; static u8 fan_control_initial_status; static u8 fan_control_desired_level; +static u8 fan_control_resume_level; static int fan_watchdog_maxinterval; static struct mutex fan_mutex; @@ -5431,8 +5441,8 @@ static int fan_set_level(int level) case TPACPI_FAN_WR_ACPI_FANS: case TPACPI_FAN_WR_TPEC: - if ((level != TP_EC_FAN_AUTO) && - (level != TP_EC_FAN_FULLSPEED) && + if (!(level & TP_EC_FAN_AUTO) && + !(level & TP_EC_FAN_FULLSPEED) && ((level < 0) || (level > 7))) return -EINVAL; @@ -5996,38 +6006,67 @@ static void fan_exit(void) static void fan_suspend(pm_message_t state) { + int rc; + if (!fan_control_allowed) return; /* Store fan status in cache */ - fan_get_status_safe(NULL); + fan_control_resume_level = 0; + rc = fan_get_status_safe(&fan_control_resume_level); + if (rc < 0) + printk(TPACPI_NOTICE + "failed to read fan level for later " + "restore during resume: %d\n", rc); + + /* if it is undefined, don't attempt to restore it. + * KEEP THIS LAST */ if (tp_features.fan_ctrl_status_undef) - fan_control_desired_level = TP_EC_FAN_AUTO; + fan_control_resume_level = 0; } static void fan_resume(void) { - u8 saved_fan_level; u8 current_level = 7; bool do_set = false; + int rc; /* DSDT *always* updates status on resume */ tp_features.fan_ctrl_status_undef = 0; - saved_fan_level = fan_control_desired_level; if (!fan_control_allowed || + !fan_control_resume_level || (fan_get_status_safe(¤t_level) < 0)) return; switch (fan_control_access_mode) { case TPACPI_FAN_WR_ACPI_SFAN: - do_set = (saved_fan_level > current_level); + /* never decrease fan level */ + do_set = (fan_control_resume_level > current_level); break; case TPACPI_FAN_WR_ACPI_FANS: case TPACPI_FAN_WR_TPEC: - do_set = ((saved_fan_level & TP_EC_FAN_FULLSPEED) || - (saved_fan_level == 7 && - !(current_level & TP_EC_FAN_FULLSPEED))); + /* never decrease fan level, scale is: + * TP_EC_FAN_FULLSPEED > 7 >= TP_EC_FAN_AUTO + * + * We expect the firmware to set either 7 or AUTO, but we + * handle FULLSPEED out of paranoia. + * + * So, we can safely only restore FULLSPEED or 7, anything + * else could slow the fan. Restoring AUTO is useless, at + * best that's exactly what the DSDT already set (it is the + * slower it uses). + * + * Always keep in mind that the DSDT *will* have set the + * fans to what the vendor supposes is the best level. We + * muck with it only to speed the fan up. + */ + if (fan_control_resume_level != 7 && + !(fan_control_resume_level & TP_EC_FAN_FULLSPEED)) + return; + else + do_set = !(current_level & TP_EC_FAN_FULLSPEED) && + (current_level != fan_control_resume_level); break; default: return; @@ -6035,8 +6074,11 @@ static void fan_resume(void) if (do_set) { printk(TPACPI_NOTICE "restoring fan level to 0x%02x\n", - saved_fan_level); - fan_set_level_safe(saved_fan_level); + fan_control_resume_level); + rc = fan_set_level_safe(fan_control_resume_level); + if (rc < 0) + printk(TPACPI_NOTICE + "failed to restore fan level: %d\n", rc); } } diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 76a76751da36..6659b2275c0c 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -37,9 +37,9 @@ #define OPCODE_NORM_READ 0x03 /* Read data bytes (low frequency) */ #define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */ #define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */ -#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ +#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ #define OPCODE_BE_32K 0x52 /* Erase 32KiB block */ -#define OPCODE_BE 0xc7 /* Erase whole flash block */ +#define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */ #define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ #define OPCODE_RDID 0x9f /* Read JEDEC ID */ @@ -167,7 +167,7 @@ static int wait_till_ready(struct m25p *flash) * * Returns 0 if successful, non-zero otherwise. */ -static int erase_block(struct m25p *flash) +static int erase_chip(struct m25p *flash) { DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB\n", flash->spi->dev.bus_id, __func__, @@ -181,7 +181,7 @@ static int erase_block(struct m25p *flash) write_enable(flash); /* Set up command buffer. */ - flash->command[0] = OPCODE_BE; + flash->command[0] = OPCODE_CHIP_ERASE; spi_write(flash->spi, flash->command, 1); @@ -250,15 +250,18 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr) mutex_lock(&flash->lock); - /* REVISIT in some cases we could speed up erasing large regions - * by using OPCODE_SE instead of OPCODE_BE_4K - */ - - /* now erase those sectors */ - if (len == flash->mtd.size && erase_block(flash)) { + /* whole-chip erase? */ + if (len == flash->mtd.size && erase_chip(flash)) { instr->state = MTD_ERASE_FAILED; mutex_unlock(&flash->lock); return -EIO; + + /* REVISIT in some cases we could speed up erasing large regions + * by using OPCODE_SE instead of OPCODE_BE_4K. We may have set up + * to use "small sector erase", but that's not always optimal. + */ + + /* "sector"-at-a-time erase */ } else { while (len) { if (erase_sector(flash, addr)) { @@ -574,10 +577,11 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi) for (tmp = 0, info = m25p_data; tmp < ARRAY_SIZE(m25p_data); tmp++, info++) { - if (info->jedec_id == jedec) - if (ext_jedec != 0 && info->ext_id != ext_jedec) + if (info->jedec_id == jedec) { + if (info->ext_id != 0 && info->ext_id != ext_jedec) continue; return info; + } } dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec); return NULL; diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c index e5059aa3c724..8d92d8db9a98 100644 --- a/drivers/mtd/maps/cdb89712.c +++ b/drivers/mtd/maps/cdb89712.c @@ -14,7 +14,18 @@ #include <linux/mtd/map.h> #include <linux/mtd/partitions.h> - +/* dynamic ioremap() areas */ +#define FLASH_START 0x00000000 +#define FLASH_SIZE 0x800000 +#define FLASH_WIDTH 4 + +#define SRAM_START 0x60000000 +#define SRAM_SIZE 0xc000 +#define SRAM_WIDTH 4 + +#define BOOTROM_START 0x70000000 +#define BOOTROM_SIZE 0x80 +#define BOOTROM_WIDTH 4 static struct mtd_info *flash_mtd; diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c index 35fef655ccc4..3b959fad1c4e 100644 --- a/drivers/mtd/maps/h720x-flash.c +++ b/drivers/mtd/maps/h720x-flash.c @@ -24,8 +24,8 @@ static struct mtd_info *mymtd; static struct map_info h720x_map = { .name = "H720X", .bankwidth = 4, - .size = FLASH_SIZE, - .phys = FLASH_PHYS, + .size = H720X_FLASH_SIZE, + .phys = H720X_FLASH_PHYS, }; static struct mtd_partition h720x_partitions[] = { @@ -70,7 +70,7 @@ int __init h720x_mtd_init(void) char *part_type = NULL; - h720x_map.virt = ioremap(FLASH_PHYS, FLASH_SIZE); + h720x_map.virt = ioremap(h720x_map.phys, h720x_map.size); if (!h720x_map.virt) { printk(KERN_ERR "H720x-MTD: ioremap failed\n"); diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c index 42d844f8f6bf..dfbf3f270cea 100644 --- a/drivers/mtd/maps/physmap.c +++ b/drivers/mtd/maps/physmap.c @@ -19,7 +19,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/mtd/concat.h> -#include <asm/io.h> +#include <linux/io.h> #define MAX_RESOURCES 4 @@ -27,7 +27,6 @@ struct physmap_flash_info { struct mtd_info *mtd[MAX_RESOURCES]; struct mtd_info *cmtd; struct map_info map[MAX_RESOURCES]; - struct resource *res; #ifdef CONFIG_MTD_PARTITIONS int nr_parts; struct mtd_partition *parts; @@ -70,16 +69,7 @@ static int physmap_flash_remove(struct platform_device *dev) #endif map_destroy(info->mtd[i]); } - - if (info->map[i].virt != NULL) - iounmap(info->map[i].virt); - } - - if (info->res != NULL) { - release_resource(info->res); - kfree(info->res); } - return 0; } @@ -101,7 +91,8 @@ static int physmap_flash_probe(struct platform_device *dev) if (physmap_data == NULL) return -ENODEV; - info = kzalloc(sizeof(struct physmap_flash_info), GFP_KERNEL); + info = devm_kzalloc(&dev->dev, sizeof(struct physmap_flash_info), + GFP_KERNEL); if (info == NULL) { err = -ENOMEM; goto err_out; @@ -114,10 +105,10 @@ static int physmap_flash_probe(struct platform_device *dev) (unsigned long long)(dev->resource[i].end - dev->resource[i].start + 1), (unsigned long long)dev->resource[i].start); - info->res = request_mem_region(dev->resource[i].start, - dev->resource[i].end - dev->resource[i].start + 1, - dev->dev.bus_id); - if (info->res == NULL) { + if (!devm_request_mem_region(&dev->dev, + dev->resource[i].start, + dev->resource[i].end - dev->resource[i].start + 1, + dev->dev.bus_id)) { dev_err(&dev->dev, "Could not reserve memory region\n"); err = -ENOMEM; goto err_out; @@ -129,7 +120,8 @@ static int physmap_flash_probe(struct platform_device *dev) info->map[i].bankwidth = physmap_data->width; info->map[i].set_vpp = physmap_data->set_vpp; - info->map[i].virt = ioremap(info->map[i].phys, info->map[i].size); + info->map[i].virt = devm_ioremap(&dev->dev, info->map[i].phys, + info->map[i].size); if (info->map[i].virt == NULL) { dev_err(&dev->dev, "Failed to ioremap flash region\n"); err = EIO; diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c index 024e3fffd4bb..a83192f80eba 100644 --- a/drivers/mtd/nand/fsl_upm.c +++ b/drivers/mtd/nand/fsl_upm.c @@ -163,9 +163,11 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun, ret = parse_mtd_partitions(&fun->mtd, part_types, &fun->parts, 0); #ifdef CONFIG_MTD_OF_PARTS - if (ret == 0) - ret = of_mtd_parse_partitions(fun->dev, &fun->mtd, - flash_np, &fun->parts); + if (ret == 0) { + ret = of_mtd_parse_partitions(fun->dev, flash_np, &fun->parts); + if (ret < 0) + goto err; + } #endif if (ret > 0) ret = add_mtd_partitions(&fun->mtd, fun->parts, ret); diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 75c899039023..9bd6c9ac8443 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -141,6 +141,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev, } lpcctl = pci_resource_start(pdev, 0); + pci_dev_put(pdev); if (!request_region(lpcctl, 4, driver_name)) { err = -EBUSY; diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index c0fa9c9edf08..15f0a26730ae 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -269,6 +269,7 @@ static struct pxa3xx_nand_timing stm2GbX16_timing = { static struct pxa3xx_nand_flash stm2GbX16 = { .timing = &stm2GbX16_timing, + .cmdset = &largepage_cmdset, .page_per_block = 64, .page_size = 2048, .flash_width = 16, diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index e39b21d3e168..a7e4d985f5ef 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -32,19 +32,18 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> -#include <asm/io.h> #include <asm/mach/flash.h> -#include <asm/arch/gpmc.h> -#include <asm/arch/onenand.h> -#include <asm/arch/gpio.h> -#include <asm/arch/pm.h> +#include <mach/gpmc.h> +#include <mach/onenand.h> +#include <mach/gpio.h> +#include <mach/pm.h> -#include <linux/dma-mapping.h> -#include <asm/dma-mapping.h> -#include <asm/arch/dma.h> +#include <mach/dma.h> -#include <asm/arch/board.h> +#include <mach/board.h> #define DRIVER_NAME "omap2-onenand" diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index e04bcf1dff87..d8966bae0e0b 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -1022,7 +1022,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, } /* - * OK, now the LEB is locked and we can safely start moving iy. Since + * OK, now the LEB is locked and we can safely start moving it. Since * this function utilizes thie @ubi->peb1_buf buffer which is shared * with some other functions, so lock the buffer by taking the * @ubi->buf_mutex. diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index 4f2daa5bbecf..41d47e1cf15c 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -320,7 +320,7 @@ static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb, } err = ubi_io_read_data(ubi, buf, pnum, 0, len); - if (err && err != UBI_IO_BITFLIPS) + if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG) goto out_free_buf; data_crc = be32_to_cpu(vid_hdr->data_crc); diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 05d70937b543..dcb6dac1dc54 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -1396,7 +1396,8 @@ int ubi_thread(void *u) ubi_msg("%s: %d consecutive failures", ubi->bgt_name, WL_MAX_FAILURES); ubi_ro_mode(ubi); - break; + ubi->thread_enabled = 0; + continue; } } else failures = 0; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 11f143f4adf6..231eeaf1d552 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1825,9 +1825,10 @@ config FEC2 config FEC_MPC52xx tristate "MPC52xx FEC driver" - depends on PPC_MPC52xx && PPC_BESTCOMM_FEC + depends on PPC_MPC52xx && PPC_BESTCOMM select CRC32 select PHYLIB + select PPC_BESTCOMM_FEC ---help--- This option enables support for the MPC5200's on-chip Fast Ethernet Controller diff --git a/drivers/net/Makefile b/drivers/net/Makefile index f19acf8b9220..017383ad5ec6 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -114,7 +114,7 @@ obj-$(CONFIG_EL2) += 3c503.o 8390p.o obj-$(CONFIG_NE2000) += ne.o 8390p.o obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o obj-$(CONFIG_HPLAN) += hp.o 8390p.o -obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o +obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/atl1e/atl1e_hw.c index 8cbc1b59bd62..4a7700620119 100644 --- a/drivers/net/atl1e/atl1e_hw.c +++ b/drivers/net/atl1e/atl1e_hw.c @@ -163,9 +163,6 @@ int atl1e_read_mac_addr(struct atl1e_hw *hw) * atl1e_hash_mc_addr * purpose * set hash value for a multicast address - * hash calcu processing : - * 1. calcu 32bit CRC for multicast address - * 2. reverse crc with MSB to LSB */ u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr) { @@ -174,7 +171,6 @@ u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr) int i; crc32 = ether_crc_le(6, mc_addr); - crc32 = ~crc32; for (i = 0; i < 32; i++) value |= (((crc32 >> i) & 1) << (31 - i)); diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 246d92b42636..aef403d299ee 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -3404,14 +3404,8 @@ static void atl1_get_wol(struct net_device *netdev, { struct atl1_adapter *adapter = netdev_priv(netdev); - wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; + wol->supported = WAKE_MAGIC; wol->wolopts = 0; - if (adapter->wol & ATLX_WUFC_EX) - wol->wolopts |= WAKE_UCAST; - if (adapter->wol & ATLX_WUFC_MC) - wol->wolopts |= WAKE_MCAST; - if (adapter->wol & ATLX_WUFC_BC) - wol->wolopts |= WAKE_BCAST; if (adapter->wol & ATLX_WUFC_MAG) wol->wolopts |= WAKE_MAGIC; return; @@ -3422,15 +3416,10 @@ static int atl1_set_wol(struct net_device *netdev, { struct atl1_adapter *adapter = netdev_priv(netdev); - if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + if (wol->wolopts & (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | + WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; adapter->wol = 0; - if (wol->wolopts & WAKE_UCAST) - adapter->wol |= ATLX_WUFC_EX; - if (wol->wolopts & WAKE_MCAST) - adapter->wol |= ATLX_WUFC_MC; - if (wol->wolopts & WAKE_BCAST) - adapter->wol |= ATLX_WUFC_BC; if (wol->wolopts & WAKE_MAGIC) adapter->wol |= ATLX_WUFC_MAG; return 0; diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c index f5bdc92c1a65..8571e8c0bc67 100644 --- a/drivers/net/atlx/atl2.c +++ b/drivers/net/atlx/atl2.c @@ -1690,9 +1690,11 @@ static int atl2_resume(struct pci_dev *pdev) ATL2_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0); - err = atl2_request_irq(adapter); - if (netif_running(netdev) && err) - return err; + if (netif_running(netdev)) { + err = atl2_request_irq(adapter); + if (err) + return err; + } atl2_reset_hw(&adapter->hw); diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 430d430bce29..9e8222f9e90e 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -543,9 +543,9 @@ bnx2_free_rx_mem(struct bnx2 *bp) for (j = 0; j < bp->rx_max_pg_ring; j++) { if (rxr->rx_pg_desc_ring[j]) pci_free_consistent(bp->pdev, RXBD_RING_SIZE, - rxr->rx_pg_desc_ring[i], - rxr->rx_pg_desc_mapping[i]); - rxr->rx_pg_desc_ring[i] = NULL; + rxr->rx_pg_desc_ring[j], + rxr->rx_pg_desc_mapping[j]); + rxr->rx_pg_desc_ring[j] = NULL; } if (rxr->rx_pg_ring) vfree(rxr->rx_pg_ring); @@ -3144,6 +3144,28 @@ bnx2_has_work(struct bnx2_napi *bnapi) return 0; } +static void +bnx2_chk_missed_msi(struct bnx2 *bp) +{ + struct bnx2_napi *bnapi = &bp->bnx2_napi[0]; + u32 msi_ctrl; + + if (bnx2_has_work(bnapi)) { + msi_ctrl = REG_RD(bp, BNX2_PCICFG_MSI_CONTROL); + if (!(msi_ctrl & BNX2_PCICFG_MSI_CONTROL_ENABLE)) + return; + + if (bnapi->last_status_idx == bp->idle_chk_status_idx) { + REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl & + ~BNX2_PCICFG_MSI_CONTROL_ENABLE); + REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl); + bnx2_msi(bp->irq_tbl[0].vector, bnapi); + } + } + + bp->idle_chk_status_idx = bnapi->last_status_idx; +} + static void bnx2_poll_link(struct bnx2 *bp, struct bnx2_napi *bnapi) { struct status_block *sblk = bnapi->status_blk.msi; @@ -3218,14 +3240,15 @@ static int bnx2_poll(struct napi_struct *napi, int budget) work_done = bnx2_poll_work(bp, bnapi, work_done, budget); - if (unlikely(work_done >= budget)) - break; - /* bnapi->last_status_idx is used below to tell the hw how * much work has been processed, so we must read it before * checking for more work. */ bnapi->last_status_idx = sblk->status_idx; + + if (unlikely(work_done >= budget)) + break; + rmb(); if (likely(!bnx2_has_work(bnapi))) { netif_rx_complete(bp->dev, napi); @@ -4570,6 +4593,8 @@ bnx2_init_chip(struct bnx2 *bp) for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) bp->bnx2_napi[i].last_status_idx = 0; + bp->idle_chk_status_idx = 0xffff; + bp->rx_mode = BNX2_EMAC_RX_MODE_SORT_MODE; /* Set up how to generate a link change interrupt. */ @@ -5718,6 +5743,10 @@ bnx2_timer(unsigned long data) if (atomic_read(&bp->intr_sem) != 0) goto bnx2_restart_timer; + if ((bp->flags & (BNX2_FLAG_USING_MSI | BNX2_FLAG_ONE_SHOT_MSI)) == + BNX2_FLAG_USING_MSI) + bnx2_chk_missed_msi(bp); + bnx2_send_heart_beat(bp); bp->stats_blk->stat_FwRxDrop = @@ -7204,10 +7233,13 @@ static void poll_bnx2(struct net_device *dev) { struct bnx2 *bp = netdev_priv(dev); + int i; - disable_irq(bp->pdev->irq); - bnx2_interrupt(bp->pdev->irq, dev); - enable_irq(bp->pdev->irq); + for (i = 0; i < bp->irq_nvecs; i++) { + disable_irq(bp->irq_tbl[i].vector); + bnx2_interrupt(bp->irq_tbl[i].vector, &bp->bnx2_napi[i]); + enable_irq(bp->irq_tbl[i].vector); + } } #endif diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 617d95340160..0b032c3c7b61 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -378,6 +378,9 @@ struct l2_fhdr { * pci_config_l definition * offset: 0000 */ +#define BNX2_PCICFG_MSI_CONTROL 0x00000058 +#define BNX2_PCICFG_MSI_CONTROL_ENABLE (1L<<16) + #define BNX2_PCICFG_MISC_CONFIG 0x00000068 #define BNX2_PCICFG_MISC_CONFIG_TARGET_BYTE_SWAP (1L<<2) #define BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP (1L<<3) @@ -6863,6 +6866,9 @@ struct bnx2 { u8 num_tx_rings; u8 num_rx_rings; + + u32 idle_chk_status_idx; + }; #define REG_RD(bp, offset) \ diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index d6c7d2aa761b..7092df50ff78 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -1035,10 +1035,6 @@ MODULE_PARM_DESC(copybreak, "Receive copy threshold"); * @pdev: the PCI device that received the packet * @fl: the SGE free list holding the packet * @len: the actual packet length, excluding any SGE padding - * @dma_pad: padding at beginning of buffer left by SGE DMA - * @skb_pad: padding to be used if the packet is copied - * @copy_thres: length threshold under which a packet should be copied - * @drop_thres: # of remaining buffers before we start dropping packets * * Get the next packet from a free list and complete setup of the * sk_buff. If the packet is small we make a copy and recycle the diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 1ace41a13ac3..2c341f83d327 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -1307,8 +1307,10 @@ static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) u32 fw_vers = 0; u32 tp_vers = 0; + spin_lock(&adapter->stats_lock); t3_get_fw_version(adapter, &fw_vers); t3_get_tp_version(adapter, &tp_vers); + spin_unlock(&adapter->stats_lock); strcpy(info->driver, DRV_NAME); strcpy(info->version, DRV_VERSION); @@ -2699,7 +2701,7 @@ static void set_nqsets(struct adapter *adap) int hwports = adap->params.nports; int nqsets = SGE_QSETS; - if (adap->params.rev > 0) { + if (adap->params.rev > 0 && adap->flags & USING_MSIX) { if (hwports == 2 && (hwports * nqsets > SGE_QSETS || num_cpus >= nqsets / hwports)) diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 968f64be3743..9a0898b0dbce 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -572,7 +572,7 @@ struct t3_vpd { u32 pad; /* for multiple-of-4 sizing and alignment */ }; -#define EEPROM_MAX_POLL 4 +#define EEPROM_MAX_POLL 40 #define EEPROM_STAT_ADDR 0x4000 #define VPD_BASE 0xc00 @@ -3690,6 +3690,12 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, ; pti = &port_types[adapter->params.vpd.port_type[j]]; + if (!pti->phy_prep) { + CH_ALERT(adapter, "Invalid port type index %d\n", + adapter->params.vpd.port_type[j]); + return -EINVAL; + } + ret = pti->phy_prep(&p->phy, adapter, ai->phy_base_addr + j, ai->mdio_ops); if (ret) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 3d69fae781cf..e8bfcce6b319 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -166,7 +166,7 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.5.23-k4"DRV_EXT +#define DRV_VERSION "3.5.23-k6"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" #define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation" #define PFX DRV_NAME ": " @@ -1804,7 +1804,7 @@ static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx) struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data; put_unaligned_le32(rx->dma_addr, &prev_rfd->link); pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr, - sizeof(struct rfd), PCI_DMA_TODEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); } return 0; @@ -1823,7 +1823,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, /* Need to sync before taking a peek at cb_complete bit */ pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr, - sizeof(struct rfd), PCI_DMA_FROMDEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); rfd_status = le16_to_cpu(rfd->status); DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status); @@ -1850,7 +1850,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, /* Get data */ pci_unmap_single(nic->pdev, rx->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); /* If this buffer has the el bit, but we think the receiver * is still running, check to see if it really stopped while @@ -1943,7 +1943,7 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done, new_before_last_rfd->command |= cpu_to_le16(cb_el); pci_dma_sync_single_for_device(nic->pdev, new_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); /* Now that we have a new stopping point, we can clear the old * stopping point. We must sync twice to get the proper @@ -1951,11 +1951,11 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done, old_before_last_rfd->command &= ~cpu_to_le16(cb_el); pci_dma_sync_single_for_device(nic->pdev, old_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN); pci_dma_sync_single_for_device(nic->pdev, old_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); } if(restart_required) { @@ -1978,7 +1978,7 @@ static void e100_rx_clean_list(struct nic *nic) for(rx = nic->rxs, i = 0; i < count; rx++, i++) { if(rx->skb) { pci_unmap_single(nic->pdev, rx->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); dev_kfree_skb(rx->skb); } } @@ -2021,7 +2021,7 @@ static int e100_rx_alloc_list(struct nic *nic) before_last->command |= cpu_to_le16(cb_el); before_last->size = 0; pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr, - sizeof(struct rfd), PCI_DMA_TODEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); nic->rx_to_use = nic->rx_to_clean = nic->rxs; nic->ru_running = RU_SUSPENDED; @@ -2222,7 +2222,7 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode) msleep(10); pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd), skb->data, ETH_DATA_LEN)) diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 6a3893acfe04..c854c96f5ab3 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1774,7 +1774,8 @@ static void e1000_get_wol(struct net_device *netdev, /* this function will set ->supported = 0 and return 1 if wol is not * supported by this hardware */ - if (e1000_wol_exclusion(adapter, wol)) + if (e1000_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return; /* apply any specific unsupported masks here */ @@ -1811,7 +1812,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; - if (e1000_wol_exclusion(adapter, wol)) + if (e1000_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; switch (hw->device_id) { @@ -1838,6 +1840,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & WAKE_MAGIC) adapter->wol |= E1000_WUFC_MAG; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index fac82152e4c8..872799b746f5 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1179,6 +1179,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* print bus type/speed/width info */ DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ", diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index c55de1c027af..c55fd6fdb91c 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -299,6 +299,7 @@ struct e1000_adapter { unsigned long led_status; unsigned int flags; + unsigned int flags2; struct work_struct downshift_task; struct work_struct update_phy_task; }; @@ -306,6 +307,7 @@ struct e1000_adapter { struct e1000_info { enum e1000_mac_type mac; unsigned int flags; + unsigned int flags2; u32 pba; s32 (*get_variants)(struct e1000_adapter *); struct e1000_mac_operations *mac_ops; @@ -347,6 +349,9 @@ struct e1000_info { #define FLAG_RX_RESTART_NOW (1 << 30) #define FLAG_MSI_TEST_FAILED (1 << 31) +/* CRC Stripping defines */ +#define FLAG2_CRC_STRIPPING (1 << 0) + #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) #define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i])) diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 70c11c811a08..62421ce96311 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -1713,7 +1713,8 @@ static void e1000_get_wol(struct net_device *netdev, wol->supported = 0; wol->wolopts = 0; - if (!(adapter->flags & FLAG_HAS_WOL)) + if (!(adapter->flags & FLAG_HAS_WOL) || + !device_can_wakeup(&adapter->pdev->dev)) return; wol->supported = WAKE_UCAST | WAKE_MCAST | @@ -1751,7 +1752,8 @@ static int e1000_set_wol(struct net_device *netdev, if (wol->wolopts & WAKE_MAGICSECURE) return -EOPNOTSUPP; - if (!(adapter->flags & FLAG_HAS_WOL)) + if (!(adapter->flags & FLAG_HAS_WOL) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; /* these settings will always override what we currently have */ @@ -1770,6 +1772,8 @@ static int e1000_set_wol(struct net_device *netdev, if (wol->wolopts & WAKE_ARP) adapter->wol |= E1000_WUFC_ARP; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 523b9716a543..d115a6d30f29 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -1893,12 +1893,17 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ctrl |= E1000_CTRL_PHY_RST; } ret_val = e1000_acquire_swflag_ich8lan(hw); + /* Whether or not the swflag was acquired, we need to reset the part */ hw_dbg(hw, "Issuing a global reset to ich8lan"); ew32(CTRL, (ctrl | E1000_CTRL_RST)); msleep(20); - /* release the swflag because it is not reset by hardware reset */ - e1000_release_swflag_ich8lan(hw); + if (!ret_val) { + /* release the swflag because it is not reset by + * hardware reset + */ + e1000_release_swflag_ich8lan(hw); + } ret_val = e1000e_get_auto_rd_done(hw); if (ret_val) { diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index abd492b7336d..122539a0e1fe 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -345,7 +345,6 @@ no_buffers: /** * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers * @adapter: address of board private structure - * @rx_ring: pointer to receive ring structure * @cleaned_count: number of buffers to allocate this pass **/ @@ -499,6 +498,10 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, goto next_desc; } + /* adjust length to remove Ethernet CRC */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + length -= 4; + total_rx_bytes += length; total_rx_packets++; @@ -804,6 +807,10 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, pci_dma_sync_single_for_device(pdev, ps_page->dma, PAGE_SIZE, PCI_DMA_FROMDEVICE); + /* remove the CRC */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + l1 -= 4; + skb_put(skb, l1); goto copydone; } /* if */ @@ -825,6 +832,12 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, skb->truesize += length; } + /* strip the ethernet crc, problem is we're using pages now so + * this whole operation can get a little cpu intensive + */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + pskb_trim(skb, skb->len - 4); + copydone: total_rx_bytes += skb->len; total_rx_packets++; @@ -2301,8 +2314,12 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) else rctl |= E1000_RCTL_LPE; - /* Enable hardware CRC frame stripping */ - rctl |= E1000_RCTL_SECRC; + /* Some systems expect that the CRC is included in SMBUS traffic. The + * hardware strips the CRC before sending to both SMBUS (BMC) and to + * host memory when this is enabled + */ + if (adapter->flags2 & FLAG2_CRC_STRIPPING) + rctl |= E1000_RCTL_SECRC; /* Setup buffer sizes */ rctl &= ~E1000_RCTL_SZ_4096; @@ -4766,6 +4783,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->ei = ei; adapter->pba = ei->pba; adapter->flags = ei->flags; + adapter->flags2 = ei->flags2; adapter->hw.adapter = adapter; adapter->hw.mac.type = ei->mac; adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1; @@ -4970,6 +4988,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* reset the hardware with the new settings */ e1000e_reset(adapter); @@ -5008,6 +5027,7 @@ err_hw_init: err_sw_init: if (adapter->hw.flash_address) iounmap(adapter->hw.flash_address); + e1000e_reset_interrupt_capability(adapter); err_flashmap: iounmap(adapter->hw.hw_addr); err_ioremap: diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index 77a3d7207a5f..e909f96698e8 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -151,6 +151,16 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); */ E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]"); +/* + * Enable CRC Stripping + * + * Valid Range: 0, 1 + * + * Default Value: 1 (enabled) + */ +E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \ + "the CRC"); + struct e1000_option { enum { enable_option, range_option, list_option } type; const char *name; @@ -404,6 +414,21 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) adapter->flags |= FLAG_SMART_POWER_DOWN; } } + { /* CRC Stripping */ + const struct e1000_option opt = { + .type = enable_option, + .name = "CRC Stripping", + .err = "defaulting to enabled", + .def = OPTION_ENABLED + }; + + if (num_CrcStripping > bd) { + unsigned int crc_stripping = CrcStripping[bd]; + e1000_validate_option(&crc_stripping, &opt, adapter); + if (crc_stripping == OPTION_ENABLED) + adapter->flags2 |= FLAG2_CRC_STRIPPING; + } + } { /* Kumeran Lock Loss Workaround */ const struct e1000_option opt = { .type = enable_option, diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index e1b441effbbe..36cb6e95b465 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -568,6 +568,17 @@ static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end) return erxrdpt; } +/* + * Calculate wrap around when reading beyond the end of the RX buffer + */ +static u16 rx_packet_start(u16 ptr) +{ + if (ptr + RSV_SIZE > RXEND_INIT) + return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART_INIT + 1); + else + return ptr + RSV_SIZE; +} + static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end) { u16 erxrdpt; @@ -938,8 +949,9 @@ static void enc28j60_hw_rx(struct net_device *ndev) skb->dev = ndev; skb_reserve(skb, NET_IP_ALIGN); /* copy the packet from the receive buffer */ - enc28j60_mem_read(priv, priv->next_pk_ptr + sizeof(rsv), - len, skb_put(skb, len)); + enc28j60_mem_read(priv, + rx_packet_start(priv->next_pk_ptr), + len, skb_put(skb, len)); if (netif_msg_pktdata(priv)) dump_packet(__func__, skb->len, skb->data); skb->protocol = eth_type_trans(skb, ndev); @@ -947,7 +959,7 @@ static void enc28j60_hw_rx(struct net_device *ndev) ndev->stats.rx_packets++; ndev->stats.rx_bytes += len; ndev->last_rx = jiffies; - netif_rx(skb); + netif_rx_ni(skb); } } /* diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 83a5cb6aa23b..c4af949bf860 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1407,6 +1407,10 @@ static int gfar_clean_tx_ring(struct net_device *dev) if (bdp->status & TXBD_DEF) dev->stats.collisions++; + /* Unmap the DMA memory */ + dma_unmap_single(&priv->dev->dev, bdp->bufPtr, + bdp->length, DMA_TO_DEVICE); + /* Free the sk buffer associated with this TxBD */ dev_kfree_skb_irq(priv->tx_skbuff[priv->skb_dirtytx]); @@ -1666,6 +1670,9 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) skb = priv->rx_skbuff[priv->skb_currx]; + dma_unmap_single(&priv->dev->dev, bdp->bufPtr, + priv->rx_buffer_size, DMA_FROM_DEVICE); + /* We drop the frame if we failed to allocate a new buffer */ if (unlikely(!newskb || !(bdp->status & RXBD_LAST) || bdp->status & RXBD_ERR)) { @@ -1674,14 +1681,8 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) if (unlikely(!newskb)) newskb = skb; - if (skb) { - dma_unmap_single(&priv->dev->dev, - bdp->bufPtr, - priv->rx_buffer_size, - DMA_FROM_DEVICE); - + if (skb) dev_kfree_skb_any(skb); - } } else { /* Increment the number of packets */ dev->stats.rx_packets++; diff --git a/drivers/net/hp-plus.c b/drivers/net/hp-plus.c index fbbd3e660c27..c01e290d09d2 100644 --- a/drivers/net/hp-plus.c +++ b/drivers/net/hp-plus.c @@ -230,7 +230,7 @@ static int __init hpp_probe1(struct net_device *dev, int ioaddr) dev->open = &hpp_open; dev->stop = &hpp_close; #ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = ei_poll; + dev->poll_controller = eip_poll; #endif ei_status.name = name; diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index 58906c984be9..89964fa739a0 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -1776,7 +1776,8 @@ static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) /* this function will set ->supported = 0 and return 1 if wol is not * supported by this hardware */ - if (igb_wol_exclusion(adapter, wol)) + if (igb_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return; /* apply any specific unsupported masks here */ @@ -1805,7 +1806,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; - if (igb_wol_exclusion(adapter, wol)) + if (igb_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; switch (hw->device_id) { @@ -1825,6 +1827,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & WAKE_MAGIC) adapter->wol |= E1000_WUFC_MAG; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 1f397cd99414..20d27e622ec1 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1019,10 +1019,9 @@ static int __devinit igb_probe(struct pci_dev *pdev, state &= ~PCIE_LINK_STATE_L0S; pci_write_config_word(us_dev, pos + PCI_EXP_LNKCTL, state); - printk(KERN_INFO "Disabling ASPM L0s upstream switch " - "port %x:%x.%x\n", us_dev->bus->number, - PCI_SLOT(us_dev->devfn), - PCI_FUNC(us_dev->devfn)); + dev_info(&pdev->dev, + "Disabling ASPM L0s upstream switch port %s\n", + pci_name(us_dev)); } default: break; @@ -1244,6 +1243,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* reset the hardware with the new settings */ igb_reset(adapter); @@ -1980,7 +1980,6 @@ static void igb_configure_rx(struct igb_adapter *adapter) /** * igb_free_tx_resources - Free Tx Resources per Queue - * @adapter: board private structure * @tx_ring: Tx descriptor ring for a specific queue * * Free all transmit software resources @@ -2033,7 +2032,6 @@ static void igb_unmap_and_free_tx_resource(struct igb_adapter *adapter, /** * igb_clean_tx_ring - Free Tx Buffers - * @adapter: board private structure * @tx_ring: ring to be cleaned **/ static void igb_clean_tx_ring(struct igb_ring *tx_ring) @@ -2080,7 +2078,6 @@ static void igb_clean_all_tx_rings(struct igb_adapter *adapter) /** * igb_free_rx_resources - Free Rx Resources - * @adapter: board private structure * @rx_ring: ring to clean the resources from * * Free all receive software resources @@ -2120,7 +2117,6 @@ static void igb_free_all_rx_resources(struct igb_adapter *adapter) /** * igb_clean_rx_ring - Free Rx Buffers per Queue - * @adapter: board private structure * @rx_ring: ring to free buffers from **/ static void igb_clean_rx_ring(struct igb_ring *rx_ring) diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c index 7373dafbb3f7..059369885be1 100644 --- a/drivers/net/ipg.c +++ b/drivers/net/ipg.c @@ -1112,7 +1112,7 @@ static void ipg_nic_rx_free_skb(struct net_device *dev) struct ipg_rx *rxfd = sp->rxd + entry; pci_unmap_single(sp->pdev, - le64_to_cpu(rxfd->frag_info & ~IPG_RFI_FRAGLEN), + le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN, sp->rx_buf_sz, PCI_DMA_FROMDEVICE); dev_kfree_skb_irq(sp->rx_buff[entry]); sp->rx_buff[entry] = NULL; @@ -1179,7 +1179,7 @@ static int ipg_nic_rx_check_error(struct net_device *dev) */ if (sp->rx_buff[entry]) { pci_unmap_single(sp->pdev, - le64_to_cpu(rxfd->frag_info & ~IPG_RFI_FRAGLEN), + le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN, sp->rx_buf_sz, PCI_DMA_FROMDEVICE); dev_kfree_skb_irq(sp->rx_buff[entry]); @@ -1246,7 +1246,7 @@ static void ipg_nic_rx_with_start(struct net_device *dev, if (jumbo->found_start) dev_kfree_skb_irq(jumbo->skb); - pci_unmap_single(pdev, le64_to_cpu(rxfd->frag_info & ~IPG_RFI_FRAGLEN), + pci_unmap_single(pdev, le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN, sp->rx_buf_sz, PCI_DMA_FROMDEVICE); skb_put(skb, sp->rxfrag_size); @@ -1349,7 +1349,7 @@ static int ipg_nic_rx_jumbo(struct net_device *dev) unsigned int entry = curr % IPG_RFDLIST_LENGTH; struct ipg_rx *rxfd = sp->rxd + entry; - if (!(rxfd->rfs & le64_to_cpu(IPG_RFS_RFDDONE))) + if (!(rxfd->rfs & cpu_to_le64(IPG_RFS_RFDDONE))) break; switch (ipg_nic_rx_check_frame_type(dev)) { diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 7548fb7360d9..5236f633ee36 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1287,13 +1287,39 @@ static void ixgbe_set_itr(struct ixgbe_adapter *adapter) return; } -static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter); +/** + * ixgbe_irq_disable - Mask off interrupt generation on the NIC + * @adapter: board private structure + **/ +static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter) +{ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0); + IXGBE_WRITE_FLUSH(&adapter->hw); + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + int i; + for (i = 0; i < adapter->num_msix_vectors; i++) + synchronize_irq(adapter->msix_entries[i].vector); + } else { + synchronize_irq(adapter->pdev->irq); + } +} + +/** + * ixgbe_irq_enable - Enable default interrupt generation settings + * @adapter: board private structure + **/ +static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter) +{ + u32 mask; + mask = IXGBE_EIMS_ENABLE_MASK; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask); + IXGBE_WRITE_FLUSH(&adapter->hw); +} /** * ixgbe_intr - legacy mode Interrupt Handler * @irq: interrupt number * @data: pointer to a network interface device structure - * @pt_regs: CPU registers structure **/ static irqreturn_t ixgbe_intr(int irq, void *data) { @@ -1394,35 +1420,6 @@ static void ixgbe_free_irq(struct ixgbe_adapter *adapter) } /** - * ixgbe_irq_disable - Mask off interrupt generation on the NIC - * @adapter: board private structure - **/ -static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter) -{ - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0); - IXGBE_WRITE_FLUSH(&adapter->hw); - if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { - int i; - for (i = 0; i < adapter->num_msix_vectors; i++) - synchronize_irq(adapter->msix_entries[i].vector); - } else { - synchronize_irq(adapter->pdev->irq); - } -} - -/** - * ixgbe_irq_enable - Enable default interrupt generation settings - * @adapter: board private structure - **/ -static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter) -{ - u32 mask; - mask = IXGBE_EIMS_ENABLE_MASK; - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask); - IXGBE_WRITE_FLUSH(&adapter->hw); -} - -/** * ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts * **/ @@ -2332,7 +2329,7 @@ static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter, * Once we know the feature-set enabled for the device, we'll cache * the register offset the descriptor ring is assigned to. **/ -static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) +static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) { int feature_mask = 0, rss_i; int i, txr_idx, rxr_idx; @@ -2369,7 +2366,7 @@ static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) * number of queues at compile-time. The polling_netdev array is * intended for Multiqueue, but should work fine with a single queue. **/ -static int __devinit ixgbe_alloc_queues(struct ixgbe_adapter *adapter) +static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter) { int i; @@ -2410,8 +2407,7 @@ err_tx_ring_allocation: * Attempt to configure the interrupts using the best available * capabilities of the hardware and the kernel. **/ -static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter - *adapter) +static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter) { int err = 0; int vector, v_budget; @@ -2503,7 +2499,7 @@ static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter) * - Hardware queue count (num_*_queues) * - defined by miscellaneous hardware support/features (RSS, etc.) **/ -static int __devinit ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter) +static int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter) { int err; diff --git a/drivers/net/jme.c b/drivers/net/jme.c index 81c6cdc3851f..665e70d620fc 100644 --- a/drivers/net/jme.c +++ b/drivers/net/jme.c @@ -912,23 +912,23 @@ jme_alloc_and_feed_skb(struct jme_adapter *jme, int idx) skb_put(skb, framesize); skb->protocol = eth_type_trans(skb, jme->dev); - if (jme_rxsum_ok(jme, rxdesc->descwb.flags)) + if (jme_rxsum_ok(jme, le16_to_cpu(rxdesc->descwb.flags))) skb->ip_summed = CHECKSUM_UNNECESSARY; else skb->ip_summed = CHECKSUM_NONE; - if (rxdesc->descwb.flags & RXWBFLAG_TAGON) { + if (rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_TAGON)) { if (jme->vlgrp) { jme->jme_vlan_rx(skb, jme->vlgrp, - le32_to_cpu(rxdesc->descwb.vlan)); + le16_to_cpu(rxdesc->descwb.vlan)); NET_STAT(jme).rx_bytes += 4; } } else { jme->jme_rx(skb); } - if ((le16_to_cpu(rxdesc->descwb.flags) & RXWBFLAG_DEST) == - RXWBFLAG_DEST_MUL) + if ((rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_DEST)) == + cpu_to_le16(RXWBFLAG_DEST_MUL)) ++(NET_STAT(jme).multicast); jme->dev->last_rx = jiffies; @@ -961,7 +961,7 @@ jme_process_receive(struct jme_adapter *jme, int limit) rxdesc = rxring->desc; rxdesc += i; - if ((rxdesc->descwb.flags & RXWBFLAG_OWN) || + if ((rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_OWN)) || !(rxdesc->descwb.desccnt & RXWBDCNT_WBCPL)) goto out; @@ -1763,10 +1763,9 @@ jme_expand_header(struct jme_adapter *jme, struct sk_buff *skb) } static int -jme_tx_tso(struct sk_buff *skb, - u16 *mss, u8 *flags) +jme_tx_tso(struct sk_buff *skb, __le16 *mss, u8 *flags) { - *mss = skb_shinfo(skb)->gso_size << TXDESC_MSS_SHIFT; + *mss = cpu_to_le16(skb_shinfo(skb)->gso_size << TXDESC_MSS_SHIFT); if (*mss) { *flags |= TXFLAG_LSEN; @@ -1826,11 +1825,11 @@ jme_tx_csum(struct jme_adapter *jme, struct sk_buff *skb, u8 *flags) } static inline void -jme_tx_vlan(struct sk_buff *skb, u16 *vlan, u8 *flags) +jme_tx_vlan(struct sk_buff *skb, __le16 *vlan, u8 *flags) { if (vlan_tx_tag_present(skb)) { *flags |= TXFLAG_TAGON; - *vlan = vlan_tx_tag_get(skb); + *vlan = cpu_to_le16(vlan_tx_tag_get(skb)); } } diff --git a/drivers/net/jme.h b/drivers/net/jme.h index f863aee6648b..3f5d91543246 100644 --- a/drivers/net/jme.h +++ b/drivers/net/jme.h @@ -22,7 +22,7 @@ */ #ifndef __JME_H_INCLUDED__ -#define __JME_H_INCLUDEE__ +#define __JME_H_INCLUDED__ #define DRV_NAME "jme" #define DRV_VERSION "1.0.3" diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 42394505bb50..590039cbb146 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -70,6 +70,9 @@ static void macvlan_broadcast(struct sk_buff *skb, struct sk_buff *nskb; unsigned int i; + if (skb->protocol == htons(ETH_P_PAUSE)) + return; + for (i = 0; i < MACVLAN_HASH_SIZE; i++) { hlist_for_each_entry_rcu(vlan, n, &port->vlan_hash[i], hlist) { dev = vlan->dev; diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c index a339afbeed38..96e709d6440a 100644 --- a/drivers/net/mlx4/en_netdev.c +++ b/drivers/net/mlx4/en_netdev.c @@ -656,10 +656,10 @@ static int mlx4_en_start_port(struct net_device *dev) /* Configure port */ err = mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - mdev->profile.tx_pause, - mdev->profile.tx_ppp, - mdev->profile.rx_pause, - mdev->profile.rx_ppp); + priv->prof->tx_pause, + priv->prof->tx_ppp, + priv->prof->rx_pause, + priv->prof->rx_ppp); if (err) { mlx4_err(mdev, "Failed setting port general configurations" " for port %d, with error %d\n", priv->port, err); @@ -706,7 +706,7 @@ tx_err: mlx4_en_release_rss_steer(priv); rx_err: for (i = 0; i < priv->rx_ring_num; i++) - mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[rx_index]); + mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]); cq_err: while (rx_index--) mlx4_en_deactivate_cq(priv, &priv->rx_cq[rx_index]); diff --git a/drivers/net/mlx4/en_params.c b/drivers/net/mlx4/en_params.c index c2e69b1bcd0a..95706ee1c019 100644 --- a/drivers/net/mlx4/en_params.c +++ b/drivers/net/mlx4/en_params.c @@ -90,6 +90,7 @@ MLX4_EN_PARM_INT(rx_ring_size2, MLX4_EN_AUTO_CONF, "Rx ring size for port 2"); int mlx4_en_get_profile(struct mlx4_en_dev *mdev) { struct mlx4_en_profile *params = &mdev->profile; + int i; params->rx_moder_cnt = min_t(int, rx_moder_cnt, MLX4_EN_AUTO_CONF); params->rx_moder_time = min_t(int, rx_moder_time, MLX4_EN_AUTO_CONF); @@ -97,11 +98,13 @@ int mlx4_en_get_profile(struct mlx4_en_dev *mdev) params->rss_xor = (rss_xor != 0); params->rss_mask = rss_mask & 0x1f; params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS); - params->rx_pause = pprx; - params->rx_ppp = pfcrx; - params->tx_pause = pptx; - params->tx_ppp = pfctx; - if (params->rx_ppp || params->tx_ppp) { + for (i = 1; i <= MLX4_MAX_PORTS; i++) { + params->prof[i].rx_pause = pprx; + params->prof[i].rx_ppp = pfcrx; + params->prof[i].tx_pause = pptx; + params->prof[i].tx_ppp = pfctx; + } + if (pfcrx || pfctx) { params->prof[1].tx_ring_num = MLX4_EN_TX_RING_NUM; params->prof[2].tx_ring_num = MLX4_EN_TX_RING_NUM; } else { @@ -407,14 +410,14 @@ static int mlx4_en_set_pauseparam(struct net_device *dev, struct mlx4_en_dev *mdev = priv->mdev; int err; - mdev->profile.tx_pause = pause->tx_pause != 0; - mdev->profile.rx_pause = pause->rx_pause != 0; + priv->prof->tx_pause = pause->tx_pause != 0; + priv->prof->rx_pause = pause->rx_pause != 0; err = mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - mdev->profile.tx_pause, - mdev->profile.tx_ppp, - mdev->profile.rx_pause, - mdev->profile.rx_ppp); + priv->prof->tx_pause, + priv->prof->tx_ppp, + priv->prof->rx_pause, + priv->prof->rx_ppp); if (err) mlx4_err(mdev, "Failed setting pause params to\n"); @@ -425,10 +428,9 @@ static void mlx4_en_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *pause) { struct mlx4_en_priv *priv = netdev_priv(dev); - struct mlx4_en_dev *mdev = priv->mdev; - pause->tx_pause = mdev->profile.tx_pause; - pause->rx_pause = mdev->profile.rx_pause; + pause->tx_pause = priv->prof->tx_pause; + pause->rx_pause = priv->prof->rx_pause; } static void mlx4_en_get_ringparam(struct net_device *dev, diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 468921b8f4b6..90a0281d15ea 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -753,6 +753,7 @@ static int mlx4_setup_hca(struct mlx4_dev *dev) struct mlx4_priv *priv = mlx4_priv(dev); int err; int port; + __be32 ib_port_default_caps; err = mlx4_init_uar_table(dev); if (err) { @@ -852,6 +853,13 @@ static int mlx4_setup_hca(struct mlx4_dev *dev) } for (port = 1; port <= dev->caps.num_ports; port++) { + ib_port_default_caps = 0; + err = mlx4_get_port_ib_caps(dev, port, &ib_port_default_caps); + if (err) + mlx4_warn(dev, "failed to get port %d default " + "ib capabilities (%d). Continuing with " + "caps = 0\n", port, err); + dev->caps.ib_port_def_cap[port] = ib_port_default_caps; err = mlx4_SET_PORT(dev, port); if (err) { mlx4_err(dev, "Failed to set port %d, aborting\n", diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h index fa431fad0eec..34c909deaff3 100644 --- a/drivers/net/mlx4/mlx4.h +++ b/drivers/net/mlx4/mlx4.h @@ -87,6 +87,9 @@ enum { #ifdef CONFIG_MLX4_DEBUG extern int mlx4_debug_level; +#else /* CONFIG_MLX4_DEBUG */ +#define mlx4_debug_level (0) +#endif /* CONFIG_MLX4_DEBUG */ #define mlx4_dbg(mdev, format, arg...) \ do { \ @@ -94,12 +97,6 @@ extern int mlx4_debug_level; dev_printk(KERN_DEBUG, &mdev->pdev->dev, format, ## arg); \ } while (0) -#else /* CONFIG_MLX4_DEBUG */ - -#define mlx4_dbg(mdev, format, arg...) do { (void) mdev; } while (0) - -#endif /* CONFIG_MLX4_DEBUG */ - #define mlx4_err(mdev, format, arg...) \ dev_err(&mdev->pdev->dev, format, ## arg) #define mlx4_info(mdev, format, arg...) \ @@ -388,5 +385,6 @@ void mlx4_init_mac_table(struct mlx4_dev *dev, struct mlx4_mac_table *table); void mlx4_init_vlan_table(struct mlx4_dev *dev, struct mlx4_vlan_table *table); int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port); +int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps); #endif /* MLX4_H */ diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h index 11fb17c6e97b..98ddc0811f93 100644 --- a/drivers/net/mlx4/mlx4_en.h +++ b/drivers/net/mlx4/mlx4_en.h @@ -322,6 +322,10 @@ struct mlx4_en_port_profile { u32 rx_ring_num; u32 tx_ring_size; u32 rx_ring_size; + u8 rx_pause; + u8 rx_ppp; + u8 tx_pause; + u8 tx_ppp; }; struct mlx4_en_profile { @@ -333,10 +337,6 @@ struct mlx4_en_profile { int rx_moder_cnt; int rx_moder_time; int auto_moder; - u8 rx_pause; - u8 rx_ppp; - u8 tx_pause; - u8 tx_ppp; u8 no_reset; struct mlx4_en_port_profile prof[MLX4_MAX_PORTS + 1]; }; diff --git a/drivers/net/mlx4/port.c b/drivers/net/mlx4/port.c index e2fdab42c4ce..0a057e5dc63b 100644 --- a/drivers/net/mlx4/port.c +++ b/drivers/net/mlx4/port.c @@ -258,6 +258,42 @@ out: } EXPORT_SYMBOL_GPL(mlx4_unregister_vlan); +int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps) +{ + struct mlx4_cmd_mailbox *inmailbox, *outmailbox; + u8 *inbuf, *outbuf; + int err; + + inmailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(inmailbox)) + return PTR_ERR(inmailbox); + + outmailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(outmailbox)) { + mlx4_free_cmd_mailbox(dev, inmailbox); + return PTR_ERR(outmailbox); + } + + inbuf = inmailbox->buf; + outbuf = outmailbox->buf; + memset(inbuf, 0, 256); + memset(outbuf, 0, 256); + inbuf[0] = 1; + inbuf[1] = 1; + inbuf[2] = 1; + inbuf[3] = 1; + *(__be16 *) (&inbuf[16]) = cpu_to_be16(0x0015); + *(__be32 *) (&inbuf[20]) = cpu_to_be32(port); + + err = mlx4_cmd_box(dev, inmailbox->dma, outmailbox->dma, port, 3, + MLX4_CMD_MAD_IFC, MLX4_CMD_TIME_CLASS_C); + if (!err) + *caps = *(__be32 *) (outbuf + 84); + mlx4_free_cmd_mailbox(dev, inmailbox); + mlx4_free_cmd_mailbox(dev, outmailbox); + return err; +} + int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port) { struct mlx4_cmd_mailbox *mailbox; @@ -273,7 +309,8 @@ int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port) ((u8 *) mailbox->buf)[3] = 6; ((__be16 *) mailbox->buf)[4] = cpu_to_be16(1 << 15); ((__be16 *) mailbox->buf)[6] = cpu_to_be16(1 << 15); - } + } else + ((__be32 *) mailbox->buf)[1] = dev->caps.ib_port_def_cap[port]; err = mlx4_cmd(dev, mailbox->dma, port, is_eth, MLX4_CMD_SET_PORT, MLX4_CMD_TIME_CLASS_B); diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index b9dcdbd369f8..e513f76f2a9f 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -899,7 +899,8 @@ static int txq_reclaim(struct tx_queue *txq, int budget, int force) if (skb != NULL) { if (skb_queue_len(&mp->rx_recycle) < mp->default_rx_ring_size && - skb_recycle_check(skb, mp->skb_size)) + skb_recycle_check(skb, mp->skb_size + + dma_get_cache_alignment() - 1)) __skb_queue_head(&mp->rx_recycle, skb); else dev_kfree_skb(skb); @@ -2435,8 +2436,8 @@ static int mv643xx_eth_shared_remove(struct platform_device *pdev) struct mv643xx_eth_shared_platform_data *pd = pdev->dev.platform_data; if (pd == NULL || pd->shared_smi == NULL) { - mdiobus_free(msp->smi_bus); mdiobus_unregister(msp->smi_bus); + mdiobus_free(msp->smi_bus); } if (msp->err_interrupt != NO_IRQ) free_irq(msp->err_interrupt, msp); diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index a5f428bcc0eb..b37867097308 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.4.3-1.375" +#define MYRI10GE_VERSION_STR "1.4.3-1.378" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); @@ -1393,6 +1393,7 @@ myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index) if (tx->req == tx->done) { tx->queue_active = 0; put_be32(htonl(1), tx->send_stop); + mb(); mmiowb(); } __netif_tx_unlock(dev_queue); @@ -2865,6 +2866,7 @@ again: if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) { tx->queue_active = 1; put_be32(htonl(1), tx->send_go); + mb(); mmiowb(); } tx->pkt_start++; diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c index b9bed82e1d21..b289a0a2b945 100644 --- a/drivers/net/netx-eth.c +++ b/drivers/net/netx-eth.c @@ -401,6 +401,8 @@ static int netx_eth_drv_probe(struct platform_device *pdev) priv->xmac_base = priv->xc->xmac_base; priv->sram_base = priv->xc->sram_base; + spin_lock_init(&priv->lock); + ret = pfifo_request(PFIFO_MASK(priv->id)); if (ret) { printk("unable to request PFIFO\n"); diff --git a/drivers/net/niu.c b/drivers/net/niu.c index 9acb5d70a3ae..1b6f548c4411 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -33,8 +33,8 @@ #define DRV_MODULE_NAME "niu" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "0.9" -#define DRV_MODULE_RELDATE "May 4, 2008" +#define DRV_MODULE_VERSION "1.0" +#define DRV_MODULE_RELDATE "Nov 14, 2008" static char version[] __devinitdata = DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; @@ -51,8 +51,7 @@ MODULE_VERSION(DRV_MODULE_VERSION); #ifndef readq static u64 readq(void __iomem *reg) { - return (((u64)readl(reg + 0x4UL) << 32) | - (u64)readl(reg)); + return ((u64) readl(reg)) | (((u64) readl(reg + 4UL)) << 32); } static void writeq(u64 val, void __iomem *reg) @@ -407,7 +406,7 @@ static int esr2_set_rx_cfg(struct niu *np, unsigned long channel, u32 val) } /* Mode is always 10G fiber. */ -static int serdes_init_niu(struct niu *np) +static int serdes_init_niu_10g_fiber(struct niu *np) { struct niu_link_config *lp = &np->link_config; u32 tx_cfg, rx_cfg; @@ -444,6 +443,223 @@ static int serdes_init_niu(struct niu *np) return 0; } +static int serdes_init_niu_1g_serdes(struct niu *np) +{ + struct niu_link_config *lp = &np->link_config; + u16 pll_cfg, pll_sts; + int max_retry = 100; + u64 sig, mask, val; + u32 tx_cfg, rx_cfg; + unsigned long i; + int err; + + tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV | + PLL_TX_CFG_RATE_HALF); + rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT | + PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH | + PLL_RX_CFG_RATE_HALF); + + if (np->port == 0) + rx_cfg |= PLL_RX_CFG_EQ_LP_ADAPTIVE; + + if (lp->loopback_mode == LOOPBACK_PHY) { + u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS; + + mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_TEST_CFG_L, test_cfg); + + tx_cfg |= PLL_TX_CFG_ENTEST; + rx_cfg |= PLL_RX_CFG_ENTEST; + } + + /* Initialize PLL for 1G */ + pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_8X); + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_CFG_L, pll_cfg); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_1g_serdes: " + "mdio write to ESR2_TI_PLL_CFG_L failed", np->port); + return err; + } + + pll_sts = PLL_CFG_ENPLL; + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_STS_L, pll_sts); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_1g_serdes: " + "mdio write to ESR2_TI_PLL_STS_L failed", np->port); + return err; + } + + udelay(200); + + /* Initialize all 4 lanes of the SERDES. */ + for (i = 0; i < 4; i++) { + err = esr2_set_tx_cfg(np, i, tx_cfg); + if (err) + return err; + } + + for (i = 0; i < 4; i++) { + err = esr2_set_rx_cfg(np, i, rx_cfg); + if (err) + return err; + } + + switch (np->port) { + case 0: + val = (ESR_INT_SRDY0_P0 | ESR_INT_DET0_P0); + mask = val; + break; + + case 1: + val = (ESR_INT_SRDY0_P1 | ESR_INT_DET0_P1); + mask = val; + break; + + default: + return -EINVAL; + } + + while (max_retry--) { + sig = nr64(ESR_INT_SIGNALS); + if ((sig & mask) == val) + break; + + mdelay(500); + } + + if ((sig & mask) != val) { + dev_err(np->device, PFX "Port %u signal bits [%08x] are not " + "[%08x]\n", np->port, (int) (sig & mask), (int) val); + return -ENODEV; + } + + return 0; +} + +static int serdes_init_niu_10g_serdes(struct niu *np) +{ + struct niu_link_config *lp = &np->link_config; + u32 tx_cfg, rx_cfg, pll_cfg, pll_sts; + int max_retry = 100; + u64 sig, mask, val; + unsigned long i; + int err; + + tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV); + rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT | + PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH | + PLL_RX_CFG_EQ_LP_ADAPTIVE); + + if (lp->loopback_mode == LOOPBACK_PHY) { + u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS; + + mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_TEST_CFG_L, test_cfg); + + tx_cfg |= PLL_TX_CFG_ENTEST; + rx_cfg |= PLL_RX_CFG_ENTEST; + } + + /* Initialize PLL for 10G */ + pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_10X); + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_CFG_L, pll_cfg & 0xffff); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_10g_serdes: " + "mdio write to ESR2_TI_PLL_CFG_L failed", np->port); + return err; + } + + pll_sts = PLL_CFG_ENPLL; + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_STS_L, pll_sts & 0xffff); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_10g_serdes: " + "mdio write to ESR2_TI_PLL_STS_L failed", np->port); + return err; + } + + udelay(200); + + /* Initialize all 4 lanes of the SERDES. */ + for (i = 0; i < 4; i++) { + err = esr2_set_tx_cfg(np, i, tx_cfg); + if (err) + return err; + } + + for (i = 0; i < 4; i++) { + err = esr2_set_rx_cfg(np, i, rx_cfg); + if (err) + return err; + } + + /* check if serdes is ready */ + + switch (np->port) { + case 0: + mask = ESR_INT_SIGNALS_P0_BITS; + val = (ESR_INT_SRDY0_P0 | + ESR_INT_DET0_P0 | + ESR_INT_XSRDY_P0 | + ESR_INT_XDP_P0_CH3 | + ESR_INT_XDP_P0_CH2 | + ESR_INT_XDP_P0_CH1 | + ESR_INT_XDP_P0_CH0); + break; + + case 1: + mask = ESR_INT_SIGNALS_P1_BITS; + val = (ESR_INT_SRDY0_P1 | + ESR_INT_DET0_P1 | + ESR_INT_XSRDY_P1 | + ESR_INT_XDP_P1_CH3 | + ESR_INT_XDP_P1_CH2 | + ESR_INT_XDP_P1_CH1 | + ESR_INT_XDP_P1_CH0); + break; + + default: + return -EINVAL; + } + + while (max_retry--) { + sig = nr64(ESR_INT_SIGNALS); + if ((sig & mask) == val) + break; + + mdelay(500); + } + + if ((sig & mask) != val) { + pr_info(PFX "NIU Port %u signal bits [%08x] are not " + "[%08x] for 10G...trying 1G\n", + np->port, (int) (sig & mask), (int) val); + + /* 10G failed, try initializing at 1G */ + err = serdes_init_niu_1g_serdes(np); + if (!err) { + np->flags &= ~NIU_FLAGS_10G; + np->mac_xcvr = MAC_XCVR_PCS; + } else { + dev_err(np->device, PFX "Port %u 10G/1G SERDES " + "Link Failed \n", np->port); + return -ENODEV; + } + } + return 0; +} + static int esr_read_rxtx_ctrl(struct niu *np, unsigned long chan, u32 *val) { int err; @@ -1955,13 +2171,23 @@ static const struct niu_phy_ops phy_ops_10g_serdes = { .link_status = link_status_10g_serdes, }; +static const struct niu_phy_ops phy_ops_10g_serdes_niu = { + .serdes_init = serdes_init_niu_10g_serdes, + .link_status = link_status_10g_serdes, +}; + +static const struct niu_phy_ops phy_ops_1g_serdes_niu = { + .serdes_init = serdes_init_niu_1g_serdes, + .link_status = link_status_1g_serdes, +}; + static const struct niu_phy_ops phy_ops_1g_rgmii = { .xcvr_init = xcvr_init_1g_rgmii, .link_status = link_status_1g_rgmii, }; static const struct niu_phy_ops phy_ops_10g_fiber_niu = { - .serdes_init = serdes_init_niu, + .serdes_init = serdes_init_niu_10g_fiber, .xcvr_init = xcvr_init_10g, .link_status = link_status_10g, }; @@ -1999,11 +2225,21 @@ struct niu_phy_template { u32 phy_addr_base; }; -static const struct niu_phy_template phy_template_niu = { +static const struct niu_phy_template phy_template_niu_10g_fiber = { .ops = &phy_ops_10g_fiber_niu, .phy_addr_base = 16, }; +static const struct niu_phy_template phy_template_niu_10g_serdes = { + .ops = &phy_ops_10g_serdes_niu, + .phy_addr_base = 0, +}; + +static const struct niu_phy_template phy_template_niu_1g_serdes = { + .ops = &phy_ops_1g_serdes_niu, + .phy_addr_base = 0, +}; + static const struct niu_phy_template phy_template_10g_fiber = { .ops = &phy_ops_10g_fiber, .phy_addr_base = 8, @@ -2183,8 +2419,25 @@ static int niu_determine_phy_disposition(struct niu *np) u32 phy_addr_off = 0; if (plat_type == PLAT_TYPE_NIU) { - tp = &phy_template_niu; - phy_addr_off += np->port; + switch (np->flags & + (NIU_FLAGS_10G | + NIU_FLAGS_FIBER | + NIU_FLAGS_XCVR_SERDES)) { + case NIU_FLAGS_10G | NIU_FLAGS_XCVR_SERDES: + /* 10G Serdes */ + tp = &phy_template_niu_10g_serdes; + break; + case NIU_FLAGS_XCVR_SERDES: + /* 1G Serdes */ + tp = &phy_template_niu_1g_serdes; + break; + case NIU_FLAGS_10G | NIU_FLAGS_FIBER: + /* 10G Fiber */ + default: + tp = &phy_template_niu_10g_fiber; + phy_addr_off += np->port; + break; + } } else { switch (np->flags & (NIU_FLAGS_10G | @@ -7214,6 +7467,12 @@ static int __devinit niu_phy_type_prop_decode(struct niu *np, np->flags |= NIU_FLAGS_10G; np->flags &= ~NIU_FLAGS_FIBER; np->mac_xcvr = MAC_XCVR_XPCS; + } else if (!strcmp(phy_prop, "xgsd") || !strcmp(phy_prop, "gsd")) { + /* 10G Serdes or 1G Serdes, default to 10G */ + np->flags |= NIU_FLAGS_10G; + np->flags &= ~NIU_FLAGS_FIBER; + np->flags |= NIU_FLAGS_XCVR_SERDES; + np->mac_xcvr = MAC_XCVR_XPCS; } else { return -EINVAL; } @@ -7742,6 +8001,8 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent) u32 val; int err; + num_10g = num_1g = 0; + if (!strcmp(np->vpd.model, NIU_ALONSO_MDL_STR) || !strcmp(np->vpd.model, NIU_KIMI_MDL_STR)) { num_10g = 0; @@ -7758,6 +8019,16 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent) parent->num_ports = 2; val = (phy_encode(PORT_TYPE_10G, 0) | phy_encode(PORT_TYPE_10G, 1)); + } else if ((np->flags & NIU_FLAGS_XCVR_SERDES) && + (parent->plat_type == PLAT_TYPE_NIU)) { + /* this is the Monza case */ + if (np->flags & NIU_FLAGS_10G) { + val = (phy_encode(PORT_TYPE_10G, 0) | + phy_encode(PORT_TYPE_10G, 1)); + } else { + val = (phy_encode(PORT_TYPE_1G, 0) | + phy_encode(PORT_TYPE_1G, 1)); + } } else { err = fill_phy_probe_info(np, parent, info); if (err) @@ -8657,7 +8928,9 @@ static void __devinit niu_device_announce(struct niu *np) dev->name, (np->flags & NIU_FLAGS_XMAC ? "XMAC" : "BMAC"), (np->flags & NIU_FLAGS_10G ? "10G" : "1G"), - (np->flags & NIU_FLAGS_FIBER ? "FIBER" : "COPPER"), + (np->flags & NIU_FLAGS_FIBER ? "FIBER" : + (np->flags & NIU_FLAGS_XCVR_SERDES ? "SERDES" : + "COPPER")), (np->mac_xcvr == MAC_XCVR_MII ? "MII" : (np->mac_xcvr == MAC_XCVR_PCS ? "PCS" : "XPCS")), np->vpd.phy_type); diff --git a/drivers/net/niu.h b/drivers/net/niu.h index c6fa883daa22..180ca8ae93de 100644 --- a/drivers/net/niu.h +++ b/drivers/net/niu.h @@ -1048,6 +1048,13 @@ #define PLL_CFG_LD_SHIFT 8 #define PLL_CFG_MPY 0x0000001e #define PLL_CFG_MPY_SHIFT 1 +#define PLL_CFG_MPY_4X 0x0 +#define PLL_CFG_MPY_5X 0x00000002 +#define PLL_CFG_MPY_6X 0x00000004 +#define PLL_CFG_MPY_8X 0x00000008 +#define PLL_CFG_MPY_10X 0x0000000a +#define PLL_CFG_MPY_12X 0x0000000c +#define PLL_CFG_MPY_12P5X 0x0000000e #define PLL_CFG_ENPLL 0x00000001 #define ESR2_TI_PLL_STS_L (ESR2_BASE + 0x002) @@ -1093,6 +1100,9 @@ #define PLL_TX_CFG_INVPAIR 0x00000080 #define PLL_TX_CFG_RATE 0x00000060 #define PLL_TX_CFG_RATE_SHIFT 5 +#define PLL_TX_CFG_RATE_FULL 0x0 +#define PLL_TX_CFG_RATE_HALF 0x20 +#define PLL_TX_CFG_RATE_QUAD 0x40 #define PLL_TX_CFG_BUSWIDTH 0x0000001c #define PLL_TX_CFG_BUSWIDTH_SHIFT 2 #define PLL_TX_CFG_ENTEST 0x00000002 @@ -1132,6 +1142,9 @@ #define PLL_RX_CFG_INVPAIR 0x00000080 #define PLL_RX_CFG_RATE 0x00000060 #define PLL_RX_CFG_RATE_SHIFT 5 +#define PLL_RX_CFG_RATE_FULL 0x0 +#define PLL_RX_CFG_RATE_HALF 0x20 +#define PLL_RX_CFG_RATE_QUAD 0x40 #define PLL_RX_CFG_BUSWIDTH 0x0000001c #define PLL_RX_CFG_BUSWIDTH_SHIFT 2 #define PLL_RX_CFG_ENTEST 0x00000002 diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index b37a498939ae..0418045166c3 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -779,6 +779,7 @@ static struct pcmcia_device_id axnet_ids[] = { PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2), PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8), PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC3-TX", 0x481e0094, 0xf91af609), + PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "100BASE", 0x281f1c5d, 0x7c2add04), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEtherCard", 0x281f1c5d, 0x7ef26116), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FEP501", 0x281f1c5d, 0x2e272058), @@ -1174,7 +1175,6 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) * ax_interrupt - handle the interrupts from an 8390 * @irq: interrupt number * @dev_id: a pointer to the net_device - * @regs: unused * * Handle the ether interface interrupts. We pull packets from * the 8390 via the card specific functions and fire them at the networking diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index cf3cca4642f2..f51944b28cfa 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -349,7 +349,7 @@ static int ibmtr_suspend(struct pcmcia_device *link) return 0; } -static int ibmtr_resume(struct pcmcia_device *link) +static int __devinit ibmtr_resume(struct pcmcia_device *link) { ibmtr_dev_t *info = link->priv; struct net_device *dev = info->dev; diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index e40d6301aa7a..ce486f094492 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1693,7 +1693,6 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8), PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76), PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e), - PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875), PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f), PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b), diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 4aa547947040..eb6411c4694f 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -227,6 +227,59 @@ static int m88e1111_config_init(struct phy_device *phydev) return 0; } +static int m88e1118_config_aneg(struct phy_device *phydev) +{ + int err; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + err = phy_write(phydev, MII_M1011_PHY_SCR, + MII_M1011_PHY_SCR_AUTO_CROSS); + if (err < 0) + return err; + + err = genphy_config_aneg(phydev); + return 0; +} + +static int m88e1118_config_init(struct phy_device *phydev) +{ + int err; + + /* Change address */ + err = phy_write(phydev, 0x16, 0x0002); + if (err < 0) + return err; + + /* Enable 1000 Mbit */ + err = phy_write(phydev, 0x15, 0x1070); + if (err < 0) + return err; + + /* Change address */ + err = phy_write(phydev, 0x16, 0x0003); + if (err < 0) + return err; + + /* Adjust LED Control */ + err = phy_write(phydev, 0x10, 0x021e); + if (err < 0) + return err; + + /* Reset address */ + err = phy_write(phydev, 0x16, 0x0); + if (err < 0) + return err; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + return 0; +} + static int m88e1145_config_init(struct phy_device *phydev) { int err; @@ -416,6 +469,19 @@ static struct phy_driver marvell_drivers[] = { .driver = { .owner = THIS_MODULE }, }, { + .phy_id = 0x01410e10, + .phy_id_mask = 0xfffffff0, + .name = "Marvell 88E1118", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &m88e1118_config_init, + .config_aneg = &m88e1118_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, + .driver = {.owner = THIS_MODULE,}, + }, + { .phy_id = 0x01410cd0, .phy_id_mask = 0xfffffff0, .name = "Marvell 88E1145", diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index d0ed1ef284a8..289fc267edf3 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -105,8 +105,6 @@ int mdiobus_register(struct mii_bus *bus) return -EINVAL; } - bus->state = MDIOBUS_REGISTERED; - mutex_init(&bus->mdio_lock); if (bus->reset) @@ -123,6 +121,9 @@ int mdiobus_register(struct mii_bus *bus) } } + if (!err) + bus->state = MDIOBUS_REGISTERED; + pr_info("%s: probed\n", bus->name); return err; @@ -136,7 +137,7 @@ void mdiobus_unregister(struct mii_bus *bus) BUG_ON(bus->state != MDIOBUS_REGISTERED); bus->state = MDIOBUS_UNREGISTERED; - device_unregister(&bus->dev); + device_del(&bus->dev); for (i = 0; i < PHY_MAX_ADDR; i++) { if (bus->phy_map[i]) device_unregister(&bus->phy_map[i]->dev); diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index e11b03b2b25a..25acbbde4a60 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -227,8 +227,17 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) if (r) return ERR_PTR(r); - /* If the phy_id is all Fs, there is no device there */ - if (0xffffffff == phy_id) + /* If the phy_id is mostly Fs, there is no device there */ + if ((phy_id & 0x1fffffff) == 0x1fffffff) + return NULL; + + /* + * Broken hardware is sometimes missing the pull down resistor on the + * MDIO line, which results in reads to non-existent devices returning + * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent + * device as well. + */ + if (phy_id == 0) return NULL; dev = phy_device_create(bus, addr, phy_id); @@ -564,20 +573,32 @@ EXPORT_SYMBOL(genphy_restart_aneg); */ int genphy_config_aneg(struct phy_device *phydev) { - int result = 0; + int result; - if (AUTONEG_ENABLE == phydev->autoneg) { - int result = genphy_config_advert(phydev); + if (AUTONEG_ENABLE != phydev->autoneg) + return genphy_setup_forced(phydev); - if (result < 0) /* error */ - return result; + result = genphy_config_advert(phydev); + + if (result < 0) /* error */ + return result; + + if (result == 0) { + /* Advertisment hasn't changed, but maybe aneg was never on to + * begin with? Or maybe phy was isolated? */ + int ctl = phy_read(phydev, MII_BMCR); + + if (ctl < 0) + return ctl; + + if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) + result = 1; /* do restart aneg */ + } - /* Only restart aneg if we are advertising something different - * than we were before. */ - if (result > 0) - result = genphy_restart_aneg(phydev); - } else - result = genphy_setup_forced(phydev); + /* Only restart aneg if we are advertising something different + * than we were before. */ + if (result > 0) + result = genphy_restart_aneg(phydev); return result; } diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 8874497b6bbf..dd3b2447e85a 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -34,6 +34,8 @@ #define MII_VSC8244_IMASK_DUPLEX 0x1000 #define MII_VSC8244_IMASK_MASK 0xf000 +#define MII_VSC8221_IMASK_MASK 0xa000 + /* Vitesse Interrupt Status Register */ #define MII_VSC8244_ISTAT 0x1a #define MII_VSC8244_ISTAT_STATUS 0x8000 @@ -49,6 +51,12 @@ #define MII_VSC8244_AUXCONSTAT_GBIT 0x0010 #define MII_VSC8244_AUXCONSTAT_100 0x0008 +#define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */ +#define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004 + +#define PHY_ID_VSC8244 0x000fc6c0 +#define PHY_ID_VSC8221 0x000fc550 + MODULE_DESCRIPTION("Vitesse PHY driver"); MODULE_AUTHOR("Kriston Carson"); MODULE_LICENSE("GPL"); @@ -95,13 +103,15 @@ static int vsc824x_ack_interrupt(struct phy_device *phydev) return (err < 0) ? err : 0; } -static int vsc824x_config_intr(struct phy_device *phydev) +static int vsc82xx_config_intr(struct phy_device *phydev) { int err; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) err = phy_write(phydev, MII_VSC8244_IMASK, - MII_VSC8244_IMASK_MASK); + phydev->drv->phy_id == PHY_ID_VSC8244 ? + MII_VSC8244_IMASK_MASK : + MII_VSC8221_IMASK_MASK); else { /* * The Vitesse PHY cannot clear the interrupt @@ -120,7 +130,7 @@ static int vsc824x_config_intr(struct phy_device *phydev) /* Vitesse 824x */ static struct phy_driver vsc8244_driver = { - .phy_id = 0x000fc6c0, + .phy_id = PHY_ID_VSC8244, .name = "Vitesse VSC8244", .phy_id_mask = 0x000fffc0, .features = PHY_GBIT_FEATURES, @@ -129,19 +139,55 @@ static struct phy_driver vsc8244_driver = { .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, .ack_interrupt = &vsc824x_ack_interrupt, - .config_intr = &vsc824x_config_intr, + .config_intr = &vsc82xx_config_intr, .driver = { .owner = THIS_MODULE,}, }; -static int __init vsc8244_init(void) +static int vsc8221_config_init(struct phy_device *phydev) { - return phy_driver_register(&vsc8244_driver); + int err; + + err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT, + MII_VSC8221_AUXCONSTAT_INIT); + return err; + + /* Perhaps we should set EXT_CON1 based on the interface? + Options are 802.3Z SerDes or SGMII */ +} + +/* Vitesse 8221 */ +static struct phy_driver vsc8221_driver = { + .phy_id = PHY_ID_VSC8221, + .phy_id_mask = 0x000ffff0, + .name = "Vitesse VSC8221", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &vsc8221_config_init, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &vsc824x_ack_interrupt, + .config_intr = &vsc82xx_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +static int __init vsc82xx_init(void) +{ + int err; + + err = phy_driver_register(&vsc8244_driver); + if (err < 0) + return err; + err = phy_driver_register(&vsc8221_driver); + if (err < 0) + phy_driver_unregister(&vsc8244_driver); + return err; } -static void __exit vsc8244_exit(void) +static void __exit vsc82xx_exit(void) { phy_driver_unregister(&vsc8244_driver); + phy_driver_unregister(&vsc8221_driver); } -module_init(vsc8244_init); -module_exit(vsc8244_exit); +module_init(vsc82xx_init); +module_exit(vsc82xx_exit); diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index 185b1dff10a8..e98d9773158d 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -1353,6 +1353,7 @@ static int pppol2tp_release(struct socket *sock) kfree_skb(skb); sock_put(sk); } + sock_put(sk); } release_sock(sk); diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index 3cdd07c45b6d..508452c02151 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -1515,9 +1515,6 @@ static u32 ql_get_link_state(struct ql3_adapter *qdev) linkState = LS_UP; } else { linkState = LS_DOWN; - if (netif_msg_link(qdev)) - printk(KERN_WARNING PFX - "%s: Link is down.\n", qdev->ndev->name); } return linkState; } @@ -1581,10 +1578,6 @@ static int ql_finish_auto_neg(struct ql3_adapter *qdev) ql_mac_enable(qdev, 1); } - if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: Change port_link_state LS_DOWN to LS_UP.\n", - qdev->ndev->name); qdev->port_link_state = LS_UP; netif_start_queue(qdev->ndev); netif_carrier_on(qdev->ndev); @@ -1655,14 +1648,9 @@ static void ql_link_state_machine_work(struct work_struct *work) /* Fall Through */ case LS_DOWN: - if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: port_link_state = LS_DOWN.\n", - qdev->ndev->name); if (curr_link_state == LS_UP) { if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: curr_link_state = LS_UP.\n", + printk(KERN_INFO PFX "%s: Link is up.\n", qdev->ndev->name); if (ql_is_auto_neg_complete(qdev)) ql_finish_auto_neg(qdev); @@ -1670,6 +1658,7 @@ static void ql_link_state_machine_work(struct work_struct *work) if (qdev->port_link_state == LS_UP) ql_link_down_detect_clear(qdev); + qdev->port_link_state = LS_UP; } break; @@ -1678,12 +1667,14 @@ static void ql_link_state_machine_work(struct work_struct *work) * See if the link is currently down or went down and came * back up */ - if ((curr_link_state == LS_DOWN) || ql_link_down_detect(qdev)) { + if (curr_link_state == LS_DOWN) { if (netif_msg_link(qdev)) printk(KERN_INFO PFX "%s: Link is down.\n", qdev->ndev->name); qdev->port_link_state = LS_DOWN; } + if (ql_link_down_detect(qdev)) + qdev->port_link_state = LS_DOWN; break; } spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c index fa98af58223e..cd0d0873d978 100644 --- a/drivers/net/sfc/ethtool.c +++ b/drivers/net/sfc/ethtool.c @@ -174,8 +174,8 @@ static struct efx_ethtool_stat efx_ethtool_stats[] = { /* EEPROM range with gPXE configuration */ #define EFX_ETHTOOL_EEPROM_MAGIC 0xEFAB -#define EFX_ETHTOOL_EEPROM_MIN 0x100U -#define EFX_ETHTOOL_EEPROM_MAX 0x400U +#define EFX_ETHTOOL_EEPROM_MIN 0x800U +#define EFX_ETHTOOL_EEPROM_MAX 0x1800U /************************************************************************** * diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index a24bb68887ab..59f242a67714 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -927,7 +927,7 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev) struct sh_eth_private *mdp = netdev_priv(ndev); struct sh_eth_txdesc *txdesc; u32 entry; - int flags; + unsigned long flags; spin_lock_irqsave(&mdp->lock, flags); if ((mdp->cur_tx - mdp->dirty_tx) >= (TX_RING_SIZE - 4)) { @@ -1141,7 +1141,7 @@ static int sh_mdio_init(struct net_device *ndev, int id) /* Hook up MII support for ethtool */ mdp->mii_bus->name = "sh_mii"; mdp->mii_bus->parent = &ndev->dev; - mdp->mii_bus->id[0] = id; + snprintf(mdp->mii_bus->id, MII_BUS_ID_SIZE, "%x", id); /* PHY IRQ */ mdp->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL); diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index fa3a460f8e2f..8e8337e8b072 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -1630,7 +1630,6 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev) * sis900_interrupt - sis900 interrupt handler * @irq: the irq number * @dev_instance: the client data object - * @regs: snapshot of processor context * * The interrupt handler does all of the Rx thread work, * and cleans up after the Tx thread diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 5051554ff05b..9a16a79b67d0 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -1735,7 +1735,7 @@ static const struct ethtool_ops smc911x_ethtool_ops = { * This routine has a simple purpose -- make the SMC chip generate an * interrupt, so an auto-detect routine can detect it, and find the IRQ, */ -static int __init smc911x_findirq(struct net_device *dev) +static int __devinit smc911x_findirq(struct net_device *dev) { struct smc911x_local *lp = netdev_priv(dev); int timeout = 20; @@ -1799,7 +1799,7 @@ static int __init smc911x_findirq(struct net_device *dev) * o actually GRAB the irq. * o GRAB the region */ -static int __init smc911x_probe(struct net_device *dev) +static int __devinit smc911x_probe(struct net_device *dev) { struct smc911x_local *lp = netdev_priv(dev); int i, retval; @@ -1813,7 +1813,7 @@ static int __init smc911x_probe(struct net_device *dev) val = SMC_GET_BYTE_TEST(lp); DBG(SMC_DEBUG_MISC, "%s: endian probe returned 0x%04x\n", CARDNAME, val); if (val != 0x87654321) { - printk(KERN_ERR "Invalid chip endian 0x08%x\n",val); + printk(KERN_ERR "Invalid chip endian 0x%08x\n",val); retval = -ENODEV; goto err_out; } @@ -2048,9 +2048,11 @@ err_out: * 0 --> there is a device * anything else, error */ -static int smc911x_drv_probe(struct platform_device *pdev) +static int __devinit smc911x_drv_probe(struct platform_device *pdev) { +#ifdef SMC_DYNAMIC_BUS_CONFIG struct smc911x_platdata *pd = pdev->dev.platform_data; +#endif struct net_device *ndev; struct resource *res; struct smc911x_local *lp; @@ -2122,7 +2124,7 @@ out: return ret; } -static int smc911x_drv_remove(struct platform_device *pdev) +static int __devexit smc911x_drv_remove(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct smc911x_local *lp = netdev_priv(ndev); @@ -2182,9 +2184,9 @@ static int smc911x_drv_resume(struct platform_device *dev) if (netif_running(ndev)) { smc911x_reset(ndev); - smc911x_enable(ndev); if (lp->phy_type != 0) smc911x_phy_configure(&lp->phy_configure); + smc911x_enable(ndev); netif_device_attach(ndev); } } @@ -2193,7 +2195,7 @@ static int smc911x_drv_resume(struct platform_device *dev) static struct platform_driver smc911x_driver = { .probe = smc911x_drv_probe, - .remove = smc911x_drv_remove, + .remove = __devexit_p(smc911x_drv_remove), .suspend = smc911x_drv_suspend, .resume = smc911x_drv_resume, .driver = { diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index fc80f250da31..35c56abf4113 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1696,7 +1696,7 @@ static const struct ethtool_ops smc_ethtool_ops = { * I just deleted auto_irq.c, since it was never built... * --jgarzik */ -static int __init smc_findirq(struct smc_local *lp) +static int __devinit smc_findirq(struct smc_local *lp) { void __iomem *ioaddr = lp->base; int timeout = 20; @@ -1770,7 +1770,7 @@ static int __init smc_findirq(struct smc_local *lp) * o actually GRAB the irq. * o GRAB the region */ -static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr, +static int __devinit smc_probe(struct net_device *dev, void __iomem *ioaddr, unsigned long irq_flags) { struct smc_local *lp = netdev_priv(dev); @@ -2126,7 +2126,7 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device * * 0 --> there is a device * anything else, error */ -static int smc_drv_probe(struct platform_device *pdev) +static int __devinit smc_drv_probe(struct platform_device *pdev) { struct smc91x_platdata *pd = pdev->dev.platform_data; struct smc_local *lp; @@ -2240,7 +2240,7 @@ static int smc_drv_probe(struct platform_device *pdev) return ret; } -static int smc_drv_remove(struct platform_device *pdev) +static int __devexit smc_drv_remove(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct smc_local *lp = netdev_priv(ndev); @@ -2305,7 +2305,7 @@ static int smc_drv_resume(struct platform_device *dev) static struct platform_driver smc_driver = { .probe = smc_drv_probe, - .remove = smc_drv_remove, + .remove = __devexit_p(smc_drv_remove), .suspend = smc_drv_suspend, .resume = smc_drv_resume, .driver = { diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index b6435d0d71f9..07599b492359 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -672,7 +672,6 @@ write_hash: /** * spider_net_prepare_tx_descr - fill tx descriptor with skb data * @card: card structure - * @descr: descriptor structure to fill out * @skb: packet to use * * returns 0 on success, <0 on failure. @@ -867,7 +866,6 @@ spider_net_release_tx_chain(struct spider_net_card *card, int brutal) /** * spider_net_kick_tx_dma - enables TX DMA processing * @card: card structure - * @descr: descriptor address to enable TX processing at * * This routine will start the transmit DMA running if * it is not already running. This routine ned only be @@ -1637,7 +1635,6 @@ spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg, * spider_net_interrupt - interrupt handler for spider_net * @irq: interrupt number * @ptr: pointer to net_device - * @regs: PU registers * * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no * interrupt found raised by card. @@ -2419,7 +2416,6 @@ spider_net_undo_pci_setup(struct spider_net_card *card) /** * spider_net_setup_pci_dev - sets up the device in terms of PCI operations - * @card: card structure * @pdev: PCI device * * Returns the card structure or NULL if any errors occur diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 1d2ef8f47780..5a40f2d78beb 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -1509,6 +1509,11 @@ static int __netdev_rx(struct net_device *dev, int *quota) desc->status = 0; np->rx_done = (np->rx_done + 1) % DONE_Q_SIZE; } + + if (*quota == 0) { /* out of rx quota */ + retcode = 1; + goto out; + } writew(np->rx_done, np->base + CompletionQConsumerIdx); out: diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 4291458955ef..fed7eba65ead 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -1142,6 +1142,70 @@ static int gem_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } +static void gem_pcs_reset(struct gem *gp) +{ + int limit; + u32 val; + + /* Reset PCS unit. */ + val = readl(gp->regs + PCS_MIICTRL); + val |= PCS_MIICTRL_RST; + writel(val, gp->regs + PCS_MIICTRL); + + limit = 32; + while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) { + udelay(100); + if (limit-- <= 0) + break; + } + if (limit <= 0) + printk(KERN_WARNING "%s: PCS reset bit would not clear.\n", + gp->dev->name); +} + +static void gem_pcs_reinit_adv(struct gem *gp) +{ + u32 val; + + /* Make sure PCS is disabled while changing advertisement + * configuration. + */ + val = readl(gp->regs + PCS_CFG); + val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO); + writel(val, gp->regs + PCS_CFG); + + /* Advertise all capabilities except assymetric + * pause. + */ + val = readl(gp->regs + PCS_MIIADV); + val |= (PCS_MIIADV_FD | PCS_MIIADV_HD | + PCS_MIIADV_SP | PCS_MIIADV_AP); + writel(val, gp->regs + PCS_MIIADV); + + /* Enable and restart auto-negotiation, disable wrapback/loopback, + * and re-enable PCS. + */ + val = readl(gp->regs + PCS_MIICTRL); + val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE); + val &= ~PCS_MIICTRL_WB; + writel(val, gp->regs + PCS_MIICTRL); + + val = readl(gp->regs + PCS_CFG); + val |= PCS_CFG_ENABLE; + writel(val, gp->regs + PCS_CFG); + + /* Make sure serialink loopback is off. The meaning + * of this bit is logically inverted based upon whether + * you are in Serialink or SERDES mode. + */ + val = readl(gp->regs + PCS_SCTRL); + if (gp->phy_type == phy_serialink) + val &= ~PCS_SCTRL_LOOP; + else + val |= PCS_SCTRL_LOOP; + writel(val, gp->regs + PCS_SCTRL); +} + #define STOP_TRIES 32 /* Must be invoked under gp->lock and gp->tx_lock. */ @@ -1168,6 +1232,9 @@ static void gem_reset(struct gem *gp) if (limit <= 0) printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name); + + if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes) + gem_pcs_reinit_adv(gp); } /* Must be invoked under gp->lock and gp->tx_lock. */ @@ -1324,7 +1391,7 @@ static int gem_set_link_modes(struct gem *gp) gp->phy_type == phy_serdes) { u32 pcs_lpa = readl(gp->regs + PCS_MIILP); - if (pcs_lpa & PCS_MIIADV_FD) + if ((pcs_lpa & PCS_MIIADV_FD) || gp->phy_type == phy_serdes) full_duplex = 1; speed = SPEED_1000; } @@ -1488,6 +1555,9 @@ static void gem_link_timer(unsigned long data) val = readl(gp->regs + PCS_MIISTAT); if ((val & PCS_MIISTAT_LS) != 0) { + if (gp->lstate == link_up) + goto restart; + gp->lstate = link_up; netif_carrier_on(gp->dev); (void)gem_set_link_modes(gp); @@ -1708,61 +1778,8 @@ static void gem_init_phy(struct gem *gp) if (gp->phy_mii.def && gp->phy_mii.def->ops->init) gp->phy_mii.def->ops->init(&gp->phy_mii); } else { - u32 val; - int limit; - - /* Reset PCS unit. */ - val = readl(gp->regs + PCS_MIICTRL); - val |= PCS_MIICTRL_RST; - writeb(val, gp->regs + PCS_MIICTRL); - - limit = 32; - while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) { - udelay(100); - if (limit-- <= 0) - break; - } - if (limit <= 0) - printk(KERN_WARNING "%s: PCS reset bit would not clear.\n", - gp->dev->name); - - /* Make sure PCS is disabled while changing advertisement - * configuration. - */ - val = readl(gp->regs + PCS_CFG); - val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO); - writel(val, gp->regs + PCS_CFG); - - /* Advertise all capabilities except assymetric - * pause. - */ - val = readl(gp->regs + PCS_MIIADV); - val |= (PCS_MIIADV_FD | PCS_MIIADV_HD | - PCS_MIIADV_SP | PCS_MIIADV_AP); - writel(val, gp->regs + PCS_MIIADV); - - /* Enable and restart auto-negotiation, disable wrapback/loopback, - * and re-enable PCS. - */ - val = readl(gp->regs + PCS_MIICTRL); - val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE); - val &= ~PCS_MIICTRL_WB; - writel(val, gp->regs + PCS_MIICTRL); - - val = readl(gp->regs + PCS_CFG); - val |= PCS_CFG_ENABLE; - writel(val, gp->regs + PCS_CFG); - - /* Make sure serialink loopback is off. The meaning - * of this bit is logically inverted based upon whether - * you are in Serialink or SERDES mode. - */ - val = readl(gp->regs + PCS_SCTRL); - if (gp->phy_type == phy_serialink) - val &= ~PCS_SCTRL_LOOP; - else - val |= PCS_SCTRL_LOOP; - writel(val, gp->regs + PCS_SCTRL); + gem_pcs_reset(gp); + gem_pcs_reinit_adv(gp); } /* Default aneg parameters */ @@ -2680,6 +2697,21 @@ static int gem_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->speed = 0; cmd->duplex = cmd->port = cmd->phy_address = cmd->transceiver = cmd->autoneg = 0; + + /* serdes means usually a Fibre connector, with most fixed */ + if (gp->phy_type == phy_serdes) { + cmd->port = PORT_FIBRE; + cmd->supported = (SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE | SUPPORTED_Autoneg | + SUPPORTED_Pause | SUPPORTED_Asym_Pause); + cmd->advertising = cmd->supported; + cmd->transceiver = XCVR_INTERNAL; + if (gp->lstate == link_up) + cmd->speed = SPEED_1000; + cmd->duplex = DUPLEX_FULL; + cmd->autoneg = 1; + } } cmd->maxtxpkt = cmd->maxrxpkt = 0; diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index c41d68761364..e60498232b94 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -1098,6 +1098,7 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev ) dma_addr_t tail_list_phys; u8 *tail_buffer; unsigned long flags; + unsigned int txlen; if ( ! priv->phyOnline ) { TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s PHY is not ready\n", @@ -1108,6 +1109,7 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev ) if (skb_padto(skb, TLAN_MIN_FRAME_SIZE)) return 0; + txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE); tail_list = priv->txList + priv->txTail; tail_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txTail; @@ -1125,16 +1127,16 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev ) if ( bbuf ) { tail_buffer = priv->txBuffer + ( priv->txTail * TLAN_MAX_FRAME_SIZE ); - skb_copy_from_linear_data(skb, tail_buffer, skb->len); + skb_copy_from_linear_data(skb, tail_buffer, txlen); } else { tail_list->buffer[0].address = pci_map_single(priv->pciDev, - skb->data, skb->len, + skb->data, txlen, PCI_DMA_TODEVICE); TLan_StoreSKB(tail_list, skb); } - tail_list->frameSize = (u16) skb->len; - tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) skb->len; + tail_list->frameSize = (u16) txlen; + tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) txlen; tail_list->buffer[1].count = 0; tail_list->buffer[1].address = 0; @@ -1431,7 +1433,9 @@ static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int ) if ( ! bbuf ) { struct sk_buff *skb = TLan_GetSKB(head_list); pci_unmap_single(priv->pciDev, head_list->buffer[0].address, - skb->len, PCI_DMA_TODEVICE); + max(skb->len, + (unsigned int)TLAN_MIN_FRAME_SIZE), + PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); head_list->buffer[8].address = 0; head_list->buffer[9].address = 0; @@ -2055,9 +2059,12 @@ static void TLan_FreeLists( struct net_device *dev ) list = priv->txList + i; skb = TLan_GetSKB(list); if ( skb ) { - pci_unmap_single(priv->pciDev, - list->buffer[0].address, skb->len, - PCI_DMA_TODEVICE); + pci_unmap_single( + priv->pciDev, + list->buffer[0].address, + max(skb->len, + (unsigned int)TLAN_MIN_FRAME_SIZE), + PCI_DMA_TODEVICE); dev_kfree_skb_any( skb ); list->buffer[8].address = 0; list->buffer[9].address = 0; diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index 85f38a6b6a49..68a7f5414133 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -323,17 +323,17 @@ static void uec_get_ethtool_stats(struct net_device *netdev, if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_HARDWARE) { base = (u32 __iomem *)&ugeth->ug_regs->tx64; for (i = 0; i < UEC_HW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = in_be32(&base[i]); } if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_TX) { base = (u32 __iomem *)ugeth->p_tx_fw_statistics_pram; for (i = 0; i < UEC_TX_FW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = base ? in_be32(&base[i]) : 0; } if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX) { base = (u32 __iomem *)ugeth->p_rx_fw_statistics_pram; for (i = 0; i < UEC_RX_FW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = base ? in_be32(&base[i]) : 0; } } diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index 37ecf845edfe..de57490103fc 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1102,12 +1102,14 @@ static int ax88178_link_reset(struct usbnet *dev) mode = AX88178_MEDIUM_DEFAULT; if (ecmd.speed == SPEED_1000) - mode |= AX_MEDIUM_GM | AX_MEDIUM_ENCK; + mode |= AX_MEDIUM_GM; else if (ecmd.speed == SPEED_100) mode |= AX_MEDIUM_PS; else mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM); + mode |= AX_MEDIUM_ENCK; + if (ecmd.duplex == DUPLEX_FULL) mode |= AX_MEDIUM_FD; else @@ -1444,6 +1446,10 @@ static const struct usb_device_id products [] = { // Apple USB Ethernet Adapter USB_DEVICE(0x05ac, 0x1402), .driver_info = (unsigned long) &ax88772_info, +}, { + // Cables-to-Go USB Ethernet Adapter + USB_DEVICE(0x0b95, 0x772a), + .driver_info = (unsigned long) &ax88772_info, }, { }, // END }; diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 1164c52e2c0a..8e90891f0e42 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2184,19 +2184,20 @@ static void hso_create_rfkill(struct hso_device *hso_dev, struct usb_interface *interface) { struct hso_net *hso_net = dev2net(hso_dev); - struct device *dev = hso_dev->dev; + struct device *dev = &hso_net->net->dev; char *rfkn; hso_net->rfkill = rfkill_allocate(&interface_to_usbdev(interface)->dev, - RFKILL_TYPE_WLAN); + RFKILL_TYPE_WWAN); if (!hso_net->rfkill) { - dev_err(dev, "%s - Out of memory", __func__); + dev_err(dev, "%s - Out of memory\n", __func__); return; } rfkn = kzalloc(20, GFP_KERNEL); if (!rfkn) { rfkill_free(hso_net->rfkill); - dev_err(dev, "%s - Out of memory", __func__); + hso_net->rfkill = NULL; + dev_err(dev, "%s - Out of memory\n", __func__); return; } snprintf(rfkn, 20, "hso-%d", @@ -2209,7 +2210,8 @@ static void hso_create_rfkill(struct hso_device *hso_dev, kfree(rfkn); hso_net->rfkill->name = NULL; rfkill_free(hso_net->rfkill); - dev_err(dev, "%s - Failed to register rfkill", __func__); + hso_net->rfkill = NULL; + dev_err(dev, "%s - Failed to register rfkill\n", __func__); return; } } diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 3590ea5a902d..11cb3e504e1c 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -2296,7 +2296,7 @@ static void velocity_set_multi(struct net_device *dev) } mac_set_cam_mask(regs, vptr->mCAMmask); - rx_mode = (RCR_AM | RCR_AB); + rx_mode = RCR_AM | RCR_AB | RCR_AP; } if (dev->mtu > 1500) rx_mode |= RCR_AL; diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index cfd4d052d666..2d14255eb103 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -240,6 +240,10 @@ static u64 ath5k_get_tsf(struct ieee80211_hw *hw); static void ath5k_reset_tsf(struct ieee80211_hw *hw); static int ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb); +static void ath5k_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes); static struct ieee80211_ops ath5k_hw_ops = { .tx = ath5k_tx, @@ -256,6 +260,7 @@ static struct ieee80211_ops ath5k_hw_ops = { .get_tx_stats = ath5k_get_tx_stats, .get_tsf = ath5k_get_tsf, .reset_tsf = ath5k_reset_tsf, + .bss_info_changed = ath5k_bss_info_changed, }; /* @@ -2942,7 +2947,7 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, sc->opmode != NL80211_IFTYPE_MESH_POINT && test_bit(ATH_STAT_PROMISC, sc->status)) rfilt |= AR5K_RX_FILTER_PROM; - if (sc->opmode == NL80211_IFTYPE_STATION || + if ((sc->opmode == NL80211_IFTYPE_STATION && sc->assoc) || sc->opmode == NL80211_IFTYPE_ADHOC) { rfilt |= AR5K_RX_FILTER_BEACON; } @@ -3083,4 +3088,32 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) end: return ret; } +static void +set_beacon_filter(struct ieee80211_hw *hw, bool enable) +{ + struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; + u32 rfilt; + rfilt = ath5k_hw_get_rx_filter(ah); + if (enable) + rfilt |= AR5K_RX_FILTER_BEACON; + else + rfilt &= ~AR5K_RX_FILTER_BEACON; + ath5k_hw_set_rx_filter(ah, rfilt); + sc->filter_flags = rfilt; +} +static void ath5k_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes) +{ + struct ath5k_softc *sc = hw->priv; + if (changes & BSS_CHANGED_ASSOC) { + mutex_lock(&sc->lock); + sc->assoc = bss_conf->assoc; + if (sc->opmode == NL80211_IFTYPE_STATION) + set_beacon_filter(hw, sc->assoc); + mutex_unlock(&sc->lock); + } +} diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index 06d1054ca94b..facc60ddada2 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h @@ -179,6 +179,7 @@ struct ath5k_softc { struct timer_list calib_tim; /* calibration timer */ int power_level; /* Requested tx power in dbm */ + bool assoc; /* assocate state */ }; #define ath5k_hw_hasbssidmask(_ah) \ diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 19980cbd5d5f..ccaeb5c219d2 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -417,19 +417,19 @@ ath5k_debug_init_device(struct ath5k_softc *sc) sc->debug.debugfs_phydir = debugfs_create_dir(wiphy_name(sc->hw->wiphy), ath5k_global_debugfs); - sc->debug.debugfs_debug = debugfs_create_file("debug", 0666, + sc->debug.debugfs_debug = debugfs_create_file("debug", S_IWUSR | S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_debug); - sc->debug.debugfs_registers = debugfs_create_file("registers", 0444, + sc->debug.debugfs_registers = debugfs_create_file("registers", S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_registers); - sc->debug.debugfs_tsf = debugfs_create_file("tsf", 0666, + sc->debug.debugfs_tsf = debugfs_create_file("tsf", S_IWUSR | S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_tsf); - sc->debug.debugfs_beacon = debugfs_create_file("beacon", 0666, + sc->debug.debugfs_beacon = debugfs_create_file("beacon", S_IWUSR | S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_beacon); - sc->debug.debugfs_reset = debugfs_create_file("reset", 0222, + sc->debug.debugfs_reset = debugfs_create_file("reset", S_IWUSR, sc->debug.debugfs_phydir, sc, &fops_reset); } diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c index 9e15c30bbc06..4dd1c1bda0fb 100644 --- a/drivers/net/wireless/ath9k/beacon.c +++ b/drivers/net/wireless/ath9k/beacon.c @@ -170,7 +170,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) skb = (struct sk_buff *)bf->bf_mpdu; if (skb) { pci_unmap_single(sc->pdev, bf->bf_dmacontext, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); } @@ -193,7 +193,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) bf->bf_buf_addr = bf->bf_dmacontext = pci_map_single(sc->pdev, skb->data, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); skb = ieee80211_get_buffered_bc(sc->hw, avp->av_if_data); @@ -352,7 +352,7 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) if (bf->bf_mpdu != NULL) { skb = (struct sk_buff *)bf->bf_mpdu; pci_unmap_single(sc->pdev, bf->bf_dmacontext, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); bf->bf_mpdu = NULL; @@ -412,7 +412,7 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) bf->bf_buf_addr = bf->bf_dmacontext = pci_map_single(sc->pdev, skb->data, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); bf->bf_mpdu = skb; @@ -439,7 +439,7 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) if (bf->bf_mpdu != NULL) { struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu; pci_unmap_single(sc->pdev, bf->bf_dmacontext, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); bf->bf_mpdu = NULL; diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index 4983402af559..504a0444d89f 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -49,10 +49,12 @@ static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) ASSERT(skb != NULL); ds->ds_vdata = skb->data; - /* setup rx descriptors */ + /* setup rx descriptors. The sc_rxbufsize here tells the harware + * how much data it can DMA to us and that we are prepared + * to process */ ath9k_hw_setuprxdesc(ah, ds, - skb_tailroom(skb), /* buffer size */ + sc->sc_rxbufsize, 0); if (sc->sc_rxlink == NULL) @@ -398,6 +400,13 @@ static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, * in rx'd frames. */ + /* Note: the kernel can allocate a value greater than + * what we ask it to give us. We really only need 4 KB as that + * is this hardware supports and in fact we need at least 3849 + * as that is the MAX AMSDU size this hardware supports. + * Unfortunately this means we may get 8 KB here from the + * kernel... and that is actually what is observed on some + * systems :( */ skb = dev_alloc_skb(len + sc->sc_cachelsz - 1); if (skb != NULL) { off = ((unsigned long) skb->data) % sc->sc_cachelsz; @@ -456,7 +465,7 @@ static int ath_rx_indicate(struct ath_softc *sc, if (nskb != NULL) { bf->bf_mpdu = nskb; bf->bf_buf_addr = pci_map_single(sc->pdev, nskb->data, - skb_end_pointer(nskb) - nskb->head, + sc->sc_rxbufsize, PCI_DMA_FROMDEVICE); bf->bf_dmacontext = bf->bf_buf_addr; ATH_RX_CONTEXT(nskb)->ctx_rxbuf = bf; @@ -542,7 +551,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) bf->bf_mpdu = skb; bf->bf_buf_addr = pci_map_single(sc->pdev, skb->data, - skb_end_pointer(skb) - skb->head, + sc->sc_rxbufsize, PCI_DMA_FROMDEVICE); bf->bf_dmacontext = bf->bf_buf_addr; ATH_RX_CONTEXT(skb)->ctx_rxbuf = bf; @@ -1007,7 +1016,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) pci_dma_sync_single_for_cpu(sc->pdev, bf->bf_buf_addr, - skb_tailroom(skb), + sc->sc_rxbufsize, PCI_DMA_FROMDEVICE); pci_unmap_single(sc->pdev, bf->bf_buf_addr, diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h index ffdf4876121b..a68f97c39359 100644 --- a/drivers/net/wireless/hostap/hostap_wlan.h +++ b/drivers/net/wireless/hostap/hostap_wlan.h @@ -918,9 +918,12 @@ struct hostap_interface { /* * TX meta data - stored in skb->cb buffer, so this must not be increased over - * the 40-byte limit + * the 48-byte limit. + * THE PADDING THIS STARTS WITH IS A HORRIBLE HACK THAT SHOULD NOT LIVE + * TO SEE THE DAY. */ struct hostap_skb_tx_data { + unsigned int __padding_for_default_qdiscs; u32 magic; /* HOSTAP_SKB_TX_DATA_MAGIC */ u8 rate; /* transmit rate */ #define HOSTAP_TX_FLAGS_WDS BIT(0) diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index dcce3542d5a7..7a9f901d4ff6 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -3897,6 +3897,7 @@ static int ipw_disassociate(void *data) if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING))) return 0; ipw_send_disassociate(data, 0); + netif_carrier_off(priv->net_dev); return 1; } @@ -10190,6 +10191,9 @@ static int ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb, u16 remaining_bytes; int fc; + if (!(priv->status & STATUS_ASSOCIATED)) + goto drop; + hdr_len = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl)); switch (priv->ieee->iw_mode) { case IW_MODE_ADHOC: diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 8d690a0eb1a9..c4c0371c763b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1384,9 +1384,11 @@ void iwl_rx_handle(struct iwl_priv *priv) rxq->queue[i] = NULL; - pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); + dma_sync_single_range_for_cpu( + &priv->pci_dev->dev, rxb->real_dma_addr, + rxb->aligned_dma_addr - rxb->real_dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); pkt = (struct iwl_rx_packet *)rxb->skb->data; /* Reclaim a command buffer only if this packet is a response @@ -1436,8 +1438,8 @@ void iwl_rx_handle(struct iwl_priv *priv) rxb->skb = NULL; } - pci_unmap_single(priv->pci_dev, rxb->dma_addr, - priv->hw_params.rx_buf_size, + pci_unmap_single(priv->pci_dev, rxb->real_dma_addr, + priv->hw_params.rx_buf_size + 256, PCI_DMA_FROMDEVICE); spin_lock_irqsave(&rxq->lock, flags); list_add_tail(&rxb->list, &priv->rxq.rx_used); @@ -2341,7 +2343,6 @@ static void iwl_bg_alive_start(struct work_struct *data) mutex_lock(&priv->mutex); iwl_alive_start(priv); mutex_unlock(&priv->mutex); - ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); } static void iwl4965_bg_rf_kill(struct work_struct *work) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 4c312c55f90c..01a845851338 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -290,6 +290,9 @@ void iwl_clear_stations_table(struct iwl_priv *priv) priv->num_stations = 0; memset(priv->stations, 0, sizeof(priv->stations)); + /* clean ucode key table bit map */ + priv->ucode_key_table = 0; + spin_unlock_irqrestore(&priv->sta_lock, flags); } EXPORT_SYMBOL(iwl_clear_stations_table); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index c018121085e9..9966d4e384ce 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -89,7 +89,8 @@ extern struct iwl_cfg iwl5100_abg_cfg; #define DEFAULT_LONG_RETRY_LIMIT 4U struct iwl_rx_mem_buffer { - dma_addr_t dma_addr; + dma_addr_t real_dma_addr; + dma_addr_t aligned_dma_addr; struct sk_buff *skb; struct list_head list; }; diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index 7cde9d76ff5d..0509c16dbe75 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -204,7 +204,7 @@ int iwl_rx_queue_restock(struct iwl_priv *priv) list_del(element); /* Point to Rx buffer via next RBD in circular buffer */ - rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->dma_addr); + rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->aligned_dma_addr); rxq->queue[rxq->write] = rxb; rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; rxq->free_count--; @@ -251,7 +251,7 @@ void iwl_rx_allocate(struct iwl_priv *priv) rxb = list_entry(element, struct iwl_rx_mem_buffer, list); /* Alloc a new receive buffer */ - rxb->skb = alloc_skb(priv->hw_params.rx_buf_size, + rxb->skb = alloc_skb(priv->hw_params.rx_buf_size + 256, __GFP_NOWARN | GFP_ATOMIC); if (!rxb->skb) { if (net_ratelimit()) @@ -266,9 +266,17 @@ void iwl_rx_allocate(struct iwl_priv *priv) list_del(element); /* Get physical address of RB/SKB */ - rxb->dma_addr = - pci_map_single(priv->pci_dev, rxb->skb->data, - priv->hw_params.rx_buf_size, PCI_DMA_FROMDEVICE); + rxb->real_dma_addr = pci_map_single( + priv->pci_dev, + rxb->skb->data, + priv->hw_params.rx_buf_size + 256, + PCI_DMA_FROMDEVICE); + /* dma address must be no more than 36 bits */ + BUG_ON(rxb->real_dma_addr & ~DMA_BIT_MASK(36)); + /* and also 256 byte aligned! */ + rxb->aligned_dma_addr = ALIGN(rxb->real_dma_addr, 256); + skb_reserve(rxb->skb, rxb->aligned_dma_addr - rxb->real_dma_addr); + list_add_tail(&rxb->list, &rxq->rx_free); rxq->free_count++; } @@ -300,8 +308,8 @@ void iwl_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { if (rxq->pool[i].skb != NULL) { pci_unmap_single(priv->pci_dev, - rxq->pool[i].dma_addr, - priv->hw_params.rx_buf_size, + rxq->pool[i].real_dma_addr, + priv->hw_params.rx_buf_size + 256, PCI_DMA_FROMDEVICE); dev_kfree_skb(rxq->pool[i].skb); } @@ -354,8 +362,8 @@ void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) * to an SKB, so we need to unmap and free potential storage */ if (rxq->pool[i].skb != NULL) { pci_unmap_single(priv->pci_dev, - rxq->pool[i].dma_addr, - priv->hw_params.rx_buf_size, + rxq->pool[i].real_dma_addr, + priv->hw_params.rx_buf_size + 256, PCI_DMA_FROMDEVICE); priv->alloc_rxb_skb--; dev_kfree_skb(rxq->pool[i].skb); diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 61797f3f8d5c..26f7084d3011 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -475,7 +475,7 @@ static int iwl_get_free_ucode_key_index(struct iwl_priv *priv) if (!test_and_set_bit(i, &priv->ucode_key_table)) return i; - return -1; + return WEP_INVALID_OFFSET; } int iwl_send_static_wepkey_cmd(struct iwl_priv *priv, u8 send_if_empty) @@ -620,6 +620,9 @@ static int iwl_set_wep_dynamic_key_info(struct iwl_priv *priv, /* else, we are overriding an existing key => no need to allocated room * in uCode. */ + WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for new kew"); + priv->stations[sta_id].sta.key.key_flags = key_flags; priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; @@ -637,6 +640,7 @@ static int iwl_set_ccmp_dynamic_key_info(struct iwl_priv *priv, { unsigned long flags; __le16 key_flags = 0; + int ret; key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK); key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); @@ -664,14 +668,18 @@ static int iwl_set_ccmp_dynamic_key_info(struct iwl_priv *priv, /* else, we are overriding an existing key => no need to allocated room * in uCode. */ + WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for new kew"); + priv->stations[sta_id].sta.key.key_flags = key_flags; priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); + spin_unlock_irqrestore(&priv->sta_lock, flags); - IWL_DEBUG_INFO("hwcrypto: modify ucode station key info\n"); - return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); + return ret; } static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, @@ -696,6 +704,9 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, /* else, we are overriding an existing key => no need to allocated room * in uCode. */ + WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for new kew"); + /* This copy is acutally not needed: we get the key with each TX */ memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16); @@ -734,6 +745,13 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, return 0; } + if (priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET) { + IWL_WARNING("Removing wrong key %d 0x%x\n", + keyconf->keyidx, key_flags); + spin_unlock_irqrestore(&priv->sta_lock, flags); + return 0; + } + if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset, &priv->ucode_key_table)) IWL_ERROR("index %d not used in uCode key table.\n", diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 285b53e7e261..45a6b0c35695 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6012,7 +6012,6 @@ static void iwl3945_bg_alive_start(struct work_struct *data) mutex_lock(&priv->mutex); iwl3945_alive_start(priv); mutex_unlock(&priv->mutex); - ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); } static void iwl3945_bg_rf_kill(struct work_struct *work) diff --git a/drivers/net/wireless/libertas_tf/if_usb.c b/drivers/net/wireless/libertas_tf/if_usb.c index 1cc03a8dd67a..59634c33b1f9 100644 --- a/drivers/net/wireless/libertas_tf/if_usb.c +++ b/drivers/net/wireless/libertas_tf/if_usb.c @@ -331,7 +331,7 @@ static int __if_usb_submit_rx_urb(struct if_usb_card *cardp, /* Fill the receive configuration URB and initialise the Rx call back */ usb_fill_bulk_urb(cardp->rx_urb, cardp->udev, usb_rcvbulkpipe(cardp->udev, cardp->ep_in), - (void *) (skb->tail), + skb_tail_pointer(skb), MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn, cardp); cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET; diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 431e3c78bf27..69eb0132593b 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -48,6 +48,9 @@ static struct usb_device_id rtl8187_table[] __devinitdata = { {USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187}, /* Sitecom */ {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187}, + {USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B}, + /* Abocom */ + {USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187}, {} }; diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index fe1867b25ff7..cac732f4047f 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -615,7 +615,7 @@ static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr, struct ieee80211_hdr *tx_hdr; tx_hdr = (struct ieee80211_hdr *)skb->data; - if (likely(!compare_ether_addr(tx_hdr->addr2, rx_hdr->addr1))) + if (likely(!memcmp(tx_hdr->addr2, rx_hdr->addr1, ETH_ALEN))) { __skb_unlink(skb, q); tx_status(hw, skb, IEEE80211_TX_STAT_ACK, stats->signal, 1); diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index c6948d8f53f6..6d017adc914a 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1785,7 +1785,7 @@ static int __devexit xennet_remove(struct xenbus_device *dev) return 0; } -static struct xenbus_driver netfront = { +static struct xenbus_driver netfront_driver = { .name = "vif", .owner = THIS_MODULE, .ids = netfront_ids, @@ -1805,7 +1805,7 @@ static int __init netif_init(void) printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n"); - return xenbus_register_frontend(&netfront); + return xenbus_register_frontend(&netfront_driver); } module_init(netif_init); @@ -1815,7 +1815,7 @@ static void __exit netif_exit(void) if (xen_initial_domain()) return; - xenbus_unregister_driver(&netfront); + xenbus_unregister_driver(&netfront_driver); } module_exit(netif_exit); diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig index 209b4a464bcf..855f389eea40 100644 --- a/drivers/parport/Kconfig +++ b/drivers/parport/Kconfig @@ -36,7 +36,7 @@ if PARPORT config PARPORT_PC tristate "PC-style hardware" depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \ - (!M68K || ISA) && !MN10300 && !AVR32 + (!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN ---help--- You should say Y here if you have a PC-style parallel port. All IBM PC compatible computers and some Alphas have PC-style diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c index e2e95b36a603..101ed49a2d15 100644 --- a/drivers/parport/parport_serial.c +++ b/drivers/parport/parport_serial.c @@ -70,6 +70,8 @@ static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc * parallel ports and <S> is the number of serial ports. */ card->numports = (dev->subsystem_device & 0xf0) >> 4; + if (card->numports > ARRAY_SIZE(card->addr)) + card->numports = ARRAY_SIZE(card->addr); return 0; } diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h index f9e244da30ae..9bcb6cbd5aa9 100644 --- a/drivers/pci/hotplug/acpiphp.h +++ b/drivers/pci/hotplug/acpiphp.h @@ -113,7 +113,7 @@ struct acpiphp_slot { u8 device; /* pci device# */ - u32 sun; /* ACPI _SUN (slot unique number) */ + unsigned long long sun; /* ACPI _SUN (slot unique number) */ u32 flags; /* see below */ }; diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index 95b536a23d25..43c10bd261b4 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -337,7 +337,7 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN; acpiphp_slot->slot = slot; - snprintf(name, SLOT_NAME_SIZE, "%u", slot->acpi_slot->sun); + snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun); retval = pci_hp_register(slot->hotplug_slot, acpiphp_slot->bridge->pci_bus, diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 955aae4071f7..3affc6472e65 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -255,13 +255,13 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) bridge->nr_slots++; - dbg("found ACPI PCI Hotplug slot %d at PCI %04x:%02x:%02x\n", + dbg("found ACPI PCI Hotplug slot %llu at PCI %04x:%02x:%02x\n", slot->sun, pci_domain_nr(bridge->pci_bus), bridge->pci_bus->number, slot->device); retval = acpiphp_register_hotplug_slot(slot); if (retval) { if (retval == -EBUSY) - warn("Slot %d already registered by another " + warn("Slot %llu already registered by another " "hotplug driver\n", slot->sun); else warn("acpiphp_register_hotplug_slot failed " diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index c892daae74d6..633e743442ac 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -1402,10 +1402,6 @@ static int __init ibmphp_init(void) goto error; } - /* lock ourselves into memory with a module - * count of -1 so that no one can unload us. */ - module_put(THIS_MODULE); - exit: return rc; @@ -1423,4 +1419,3 @@ static void __exit ibmphp_exit(void) } module_init(ibmphp_init); -module_exit(ibmphp_exit); diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 4b23bc39b11e..39cf248d24e3 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -432,18 +432,19 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ goto err_out_release_ctlr; } + /* Check if slot is occupied */ t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); - - t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */ - if (value && pciehp_force) { - rc = pciehp_enable_slot(t_slot); - if (rc) /* -ENODEV: shouldn't happen, but deal with it */ - value = 0; - } - if ((POWER_CTRL(ctrl)) && !value) { - rc = t_slot->hpc_ops->power_off_slot(t_slot); /* Power off slot if not occupied*/ - if (rc) - goto err_out_free_ctrl_slot; + t_slot->hpc_ops->get_adapter_status(t_slot, &value); + if (value) { + if (pciehp_force) + pciehp_enable_slot(t_slot); + } else { + /* Power off slot if not occupied */ + if (POWER_CTRL(ctrl)) { + rc = t_slot->hpc_ops->power_off_slot(t_slot); + if (rc) + goto err_out_free_ctrl_slot; + } } return 0; diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index a2692724b68f..5c8baa43ac9c 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1655,12 +1655,14 @@ int __init init_dmars(void) iommu->flush.flush_context = __iommu_flush_context; iommu->flush.flush_iotlb = __iommu_flush_iotlb; printk(KERN_INFO "IOMMU 0x%Lx: using Register based " - "invalidation\n", drhd->reg_base_addr); + "invalidation\n", + (unsigned long long)drhd->reg_base_addr); } else { iommu->flush.flush_context = qi_flush_context; iommu->flush.flush_iotlb = qi_flush_iotlb; printk(KERN_INFO "IOMMU 0x%Lx: using Queued " - "invalidation\n", drhd->reg_base_addr); + "invalidation\n", + (unsigned long long)drhd->reg_base_addr); } } diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index b3a63edb6901..ae5ec76dca77 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -63,7 +63,7 @@ static acpi_status acpi_run_osc(acpi_handle handle, union acpi_object in_params[4]; struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; union acpi_object *out_obj; - u32 osc_dw0, flags = osc_args->capbuf[OSC_QUERY_TYPE]; + u32 errors, flags = osc_args->capbuf[OSC_QUERY_TYPE]; /* Setting up input parameters */ input.count = 4; @@ -92,15 +92,16 @@ static acpi_status acpi_run_osc(acpi_handle handle, status = AE_TYPE; goto out_kfree; } - osc_dw0 = *((u32 *)out_obj->buffer.pointer); - if (osc_dw0) { - if (osc_dw0 & OSC_REQUEST_ERROR) + /* Need to ignore the bit0 in result code */ + errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); + if (errors) { + if (errors & OSC_REQUEST_ERROR) printk(KERN_DEBUG "_OSC request fails\n"); - if (osc_dw0 & OSC_INVALID_UUID_ERROR) + if (errors & OSC_INVALID_UUID_ERROR) printk(KERN_DEBUG "_OSC invalid UUID\n"); - if (osc_dw0 & OSC_INVALID_REVISION_ERROR) + if (errors & OSC_INVALID_REVISION_ERROR) printk(KERN_DEBUG "_OSC invalid revision\n"); - if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) { + if (errors & OSC_CAPABILITIES_MASK_ERROR) { if (flags & OSC_QUERY_ENABLE) goto out_success; printk(KERN_DEBUG "_OSC FW not grant req. control\n"); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 21f2ac639cab..061d1ee0046a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1832,7 +1832,7 @@ int pci_reset_function(struct pci_dev *dev) if (!(cap & PCI_EXP_DEVCAP_FLR)) return -ENOTTY; - if (!dev->msi_enabled && !dev->msix_enabled) + if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0) disable_irq(dev->irq); pci_save_state(dev); @@ -1841,7 +1841,7 @@ int pci_reset_function(struct pci_dev *dev) r = pci_execute_reset_function(dev); pci_restore_state(dev); - if (!dev->msi_enabled && !dev->msix_enabled) + if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0) enable_irq(dev->irq); return r; @@ -2042,7 +2042,7 @@ static int __devinit pci_init(void) return 0; } -static int __devinit pci_setup(char *str) +static int __init pci_setup(char *str) { while (str) { char *k = strchr(str, ','); diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index dfc63d01f20a..aac7006949f1 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -252,7 +252,7 @@ static void report_resume(struct pci_dev *dev, void *data) if (!dev->driver || !dev->driver->err_handler || - !dev->driver->err_handler->slot_reset) + !dev->driver->err_handler->resume) return; err_handler = dev->driver->err_handler; diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 8f63f4c6b85f..9aad608bcf3f 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -16,6 +16,7 @@ #include <linux/pm.h> #include <linux/init.h> #include <linux/slab.h> +#include <linux/jiffies.h> #include <linux/pci-aspm.h> #include "../pci.h" @@ -161,11 +162,12 @@ static void pcie_check_clock_pm(struct pci_dev *pdev) */ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev) { - int pos, child_pos; + int pos, child_pos, i = 0; u16 reg16 = 0; struct pci_dev *child_dev; int same_clock = 1; - + unsigned long start_jiffies; + u16 child_regs[8], parent_reg; /* * all functions of a slot should have the same Slot Clock * Configuration, so just check one function @@ -191,16 +193,19 @@ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev) child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKCTL, ®16); + child_regs[i] = reg16; if (same_clock) reg16 |= PCI_EXP_LNKCTL_CCC; else reg16 &= ~PCI_EXP_LNKCTL_CCC; pci_write_config_word(child_dev, child_pos + PCI_EXP_LNKCTL, reg16); + i++; } /* Configure upstream component */ pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16); + parent_reg = reg16; if (same_clock) reg16 |= PCI_EXP_LNKCTL_CCC; else @@ -212,12 +217,30 @@ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev) pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); /* Wait for link training end */ - while (1) { + /* break out after waiting for 1 second */ + start_jiffies = jiffies; + while ((jiffies - start_jiffies) < HZ) { pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, ®16); if (!(reg16 & PCI_EXP_LNKSTA_LT)) break; cpu_relax(); } + /* training failed -> recover */ + if ((jiffies - start_jiffies) >= HZ) { + dev_printk (KERN_ERR, &pdev->dev, "ASPM: Could not configure" + " common clock\n"); + i = 0; + list_for_each_entry(child_dev, &pdev->subordinate->devices, + bus_list) { + child_pos = pci_find_capability(child_dev, + PCI_CAP_ID_EXP); + pci_write_config_word(child_dev, + child_pos + PCI_EXP_LNKCTL, + child_regs[i]); + i++; + } + pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, parent_reg); + } } /* diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 5049a47030ac..ce0985615133 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -22,6 +22,7 @@ #include <linux/delay.h> #include <linux/acpi.h> #include <linux/kallsyms.h> +#include <linux/dmi.h> #include "pci.h" int isa_dma_bridge_buggy; @@ -605,27 +606,6 @@ static void __init quirk_ioapic_rmw(struct pci_dev *dev) sis_apic_bug = 1; } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw); - -#define AMD8131_revA0 0x01 -#define AMD8131_revB0 0x11 -#define AMD8131_MISC 0x40 -#define AMD8131_NIOAMODE_BIT 0 -static void quirk_amd_8131_ioapic(struct pci_dev *dev) -{ - unsigned char tmp; - - if (nr_ioapics == 0) - return; - - if (dev->revision == AMD8131_revA0 || dev->revision == AMD8131_revB0) { - dev_info(&dev->dev, "Fixing up AMD8131 IOAPIC mode\n"); - pci_read_config_byte( dev, AMD8131_MISC, &tmp); - tmp &= ~(1 << AMD8131_NIOAMODE_BIT); - pci_write_config_byte( dev, AMD8131_MISC, tmp); - } -} -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic); -DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic); #endif /* CONFIG_X86_IO_APIC */ /* @@ -1422,6 +1402,155 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); +#ifdef CONFIG_X86_IO_APIC +/* + * Boot interrupts on some chipsets cannot be turned off. For these chipsets, + * remap the original interrupt in the linux kernel to the boot interrupt, so + * that a PCI device's interrupt handler is installed on the boot interrupt + * line instead. + */ +static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev) +{ + if (noioapicquirk || noioapicreroute) + return; + + dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT; + + printk(KERN_INFO "PCI quirk: reroute interrupts for 0x%04x:0x%04x\n", + dev->vendor, dev->device); + return; +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); + +/* + * On some chipsets we can disable the generation of legacy INTx boot + * interrupts. + */ + +/* + * IO-APIC1 on 6300ESB generates boot interrupts, see intel order no + * 300641-004US, section 5.7.3. + */ +#define INTEL_6300_IOAPIC_ABAR 0x40 +#define INTEL_6300_DISABLE_BOOT_IRQ (1<<14) + +static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev) +{ + u16 pci_config_word; + + if (noioapicquirk) + return; + + pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, &pci_config_word); + pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ; + pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, pci_config_word); + + printk(KERN_INFO "disabled boot interrupt on device 0x%04x:0x%04x\n", + dev->vendor, dev->device); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); + +/* + * disable boot interrupts on HT-1000 + */ +#define BC_HT1000_FEATURE_REG 0x64 +#define BC_HT1000_PIC_REGS_ENABLE (1<<0) +#define BC_HT1000_MAP_IDX 0xC00 +#define BC_HT1000_MAP_DATA 0xC01 + +static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev) +{ + u32 pci_config_dword; + u8 irq; + + if (noioapicquirk) + return; + + pci_read_config_dword(dev, BC_HT1000_FEATURE_REG, &pci_config_dword); + pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword | + BC_HT1000_PIC_REGS_ENABLE); + + for (irq = 0x10; irq < 0x10 + 32; irq++) { + outb(irq, BC_HT1000_MAP_IDX); + outb(0x00, BC_HT1000_MAP_DATA); + } + + pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword); + + printk(KERN_INFO "disabled boot interrupts on PCI device" + "0x%04x:0x%04x\n", dev->vendor, dev->device); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); + +/* + * disable boot interrupts on AMD and ATI chipsets + */ +/* + * NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131 + * rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode + * (due to an erratum). + */ +#define AMD_813X_MISC 0x40 +#define AMD_813X_NOIOAMODE (1<<0) + +static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) +{ + u32 pci_config_dword; + + if (noioapicquirk) + return; + + pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword); + pci_config_dword &= ~AMD_813X_NOIOAMODE; + pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword); + + printk(KERN_INFO "disabled boot interrupts on PCI device " + "0x%04x:0x%04x\n", dev->vendor, dev->device); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); + +#define AMD_8111_PCI_IRQ_ROUTING 0x56 + +static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev) +{ + u16 pci_config_word; + + if (noioapicquirk) + return; + + pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word); + if (!pci_config_word) { + printk(KERN_INFO "boot interrupts on PCI device 0x%04x:0x%04x " + "already disabled\n", + dev->vendor, dev->device); + return; + } + pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0); + printk(KERN_INFO "disabled boot interrupts on PCI device " + "0x%04x:0x%04x\n", dev->vendor, dev->device); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); +#endif /* CONFIG_X86_IO_APIC */ + /* * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. @@ -1828,6 +1957,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, ht_enable_msi_mapping); +/* The P5N32-SLI Premium motherboard from Asus has a problem with msi + * for the MCP55 NIC. It is not yet determined whether the msi problem + * also affects other devices. As for now, turn off msi for this device. + */ +static void __devinit nvenet_msi_disable(struct pci_dev *dev) +{ + if (dmi_name_in_vendors("P5N32-SLI PREMIUM")) { + dev_info(&dev->dev, + "Disabling msi for MCP55 NIC on P5N32-SLI Premium\n"); + dev->no_msi = 1; + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, + PCI_DEVICE_ID_NVIDIA_NVENET_15, + nvenet_msi_disable); + static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) { struct pci_dev *host_bridge; diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index 4dd1c3e157ae..5a8ccb4f604d 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -253,6 +253,7 @@ placeholder: __func__, pci_domain_nr(parent), parent->number, slot_nr); out: + kfree(slot_name); up_write(&pci_bus_sem); return slot; err: diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c index bb7338863fb9..b59d4115d20f 100644 --- a/drivers/pcmcia/bfin_cf_pcmcia.c +++ b/drivers/pcmcia/bfin_cf_pcmcia.c @@ -334,6 +334,6 @@ static void __exit bfin_cf_exit(void) module_init(bfin_cf_init); module_exit(bfin_cf_exit); -MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>") +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("BFIN CF/PCMCIA Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c index dcce9f5d8465..4a110b7b2673 100644 --- a/drivers/pcmcia/cistpl.c +++ b/drivers/pcmcia/cistpl.c @@ -351,10 +351,11 @@ int verify_cis_cache(struct pcmcia_socket *s) char *buf; buf = kmalloc(256, GFP_KERNEL); - if (buf == NULL) + if (buf == NULL) { dev_printk(KERN_WARNING, &s->dev, "no memory for verifying CIS\n"); return -ENOMEM; + } list_for_each_entry(cis, &s->cis_cache, node) { int len = cis->len; diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index c68c5d338285..0660ad182589 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -186,12 +186,6 @@ int pcmcia_register_socket(struct pcmcia_socket *socket) spin_lock_init(&socket->lock); - if (socket->resource_ops->init) { - ret = socket->resource_ops->init(socket); - if (ret) - return (ret); - } - /* try to obtain a socket number [yes, it gets ugly if we * register more than 2^sizeof(unsigned int) pcmcia * sockets... but the socket number is deprecated @@ -226,7 +220,7 @@ int pcmcia_register_socket(struct pcmcia_socket *socket) /* set proper values in socket->dev */ dev_set_drvdata(&socket->dev, socket); socket->dev.class = &pcmcia_socket_class; - snprintf(socket->dev.bus_id, BUS_ID_SIZE, "pcmcia_socket%u", socket->sock); + dev_set_name(&socket->dev, "pcmcia_socket%u", socket->sock); /* base address = 0, map = 0 */ socket->cis_mem.flags = 0; @@ -239,6 +233,12 @@ int pcmcia_register_socket(struct pcmcia_socket *socket) mutex_init(&socket->skt_mutex); spin_lock_init(&socket->thread_lock); + if (socket->resource_ops->init) { + ret = socket->resource_ops->init(socket); + if (ret) + goto err; + } + tsk = kthread_run(pccardd, socket, "pccardd"); if (IS_ERR(tsk)) { ret = PTR_ERR(tsk); diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 795660255490..47cab31ff6e4 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -622,7 +622,6 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f { struct pcmcia_device *p_dev, *tmp_dev; unsigned long flags; - int bus_id_len; s = pcmcia_get_socket(s); if (!s) @@ -650,12 +649,12 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f /* by default don't allow DMA */ p_dev->dma_mask = DMA_MASK_NONE; p_dev->dev.dma_mask = &p_dev->dma_mask; - bus_id_len = sprintf (p_dev->dev.bus_id, "%d.%d", p_dev->socket->sock, p_dev->device_no); - - p_dev->devname = kmalloc(6 + bus_id_len + 1, GFP_KERNEL); + dev_set_name(&p_dev->dev, "%d.%d", p_dev->socket->sock, p_dev->device_no); + if (!dev_name(&p_dev->dev)) + goto err_free; + p_dev->devname = kasprintf(GFP_KERNEL, "pcmcia%s", dev_name(&p_dev->dev)); if (!p_dev->devname) goto err_free; - sprintf (p_dev->devname, "pcmcia%s", p_dev->dev.bus_id); ds_dev_dbg(3, &p_dev->dev, "devname is %s\n", p_dev->devname); spin_lock_irqsave(&pcmcia_dev_list_lock, flags); @@ -668,6 +667,8 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f list_for_each_entry(tmp_dev, &s->devices_list, socket_device_list) if (p_dev->func == tmp_dev->func) { p_dev->function_config = tmp_dev->function_config; + p_dev->io = tmp_dev->io; + p_dev->irq = tmp_dev->irq; kref_get(&p_dev->function_config->ref); } diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 76d4a98f0955..f5d0ba8e22d5 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -302,9 +302,10 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev, /* We only allow changing Vpp1 and Vpp2 to the same value */ if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) && (mod->Attributes & CONF_VPP2_CHANGE_VALID)) { - if (mod->Vpp1 != mod->Vpp2) + if (mod->Vpp1 != mod->Vpp2) { ds_dbg(s, 0, "Vpp1 and Vpp2 must be the same\n"); return -EINVAL; + } s->socket.Vpp = mod->Vpp1; if (s->ops->set_socket(s, &s->socket)) { dev_printk(KERN_WARNING, &s->dev, diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 17f4ecf1c0c5..9ca22c7aafb2 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -71,7 +71,7 @@ static DEFINE_MUTEX(rsrc_mutex); ======================================================================*/ static struct resource * -make_resource(resource_size_t b, resource_size_t n, int flags, char *name) +make_resource(resource_size_t b, resource_size_t n, int flags, const char *name) { struct resource *res = kzalloc(sizeof(*res), GFP_KERNEL); @@ -624,7 +624,7 @@ static int nonstatic_adjust_io_region(struct resource *res, unsigned long r_star static struct resource *nonstatic_find_io_region(unsigned long base, int num, unsigned long align, struct pcmcia_socket *s) { - struct resource *res = make_resource(0, num, IORESOURCE_IO, s->dev.bus_id); + struct resource *res = make_resource(0, num, IORESOURCE_IO, dev_name(&s->dev)); struct socket_data *s_data = s->resource_data; struct pcmcia_align_data data; unsigned long min = base; @@ -658,7 +658,7 @@ static struct resource *nonstatic_find_io_region(unsigned long base, int num, static struct resource * nonstatic_find_mem_region(u_long base, u_long num, u_long align, int low, struct pcmcia_socket *s) { - struct resource *res = make_resource(0, num, IORESOURCE_MEM, s->dev.bus_id); + struct resource *res = make_resource(0, num, IORESOURCE_MEM, dev_name(&s->dev)); struct socket_data *s_data = s->resource_data; struct pcmcia_align_data data; unsigned long min, max; diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index a926c896475e..643a6b98462b 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -879,7 +879,7 @@ static void rio_update_route_tables(struct rio_mport *port) * link, then start recursive peer enumeration. Returns %0 if * enumeration succeeds or %-EBUSY if enumeration fails. */ -int rio_enum_mport(struct rio_mport *mport) +int __devinit rio_enum_mport(struct rio_mport *mport) { struct rio_net *net = NULL; int rc = 0; @@ -972,7 +972,7 @@ static void rio_enum_timeout(unsigned long data) * peer discovery. Returns %0 if discovery succeeds or %-EBUSY * on failure. */ -int rio_disc_mport(struct rio_mport *mport) +int __devinit rio_disc_mport(struct rio_mport *mport) { struct rio_net *net = NULL; int enum_timeout_flag = 0; diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index 680661abbc4b..6395c780008b 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -467,7 +467,7 @@ static int __devinit rio_init(void) device_initcall(rio_init); -int rio_init_mports(void) +int __devinit rio_init_mports(void) { int rc = 0; struct rio_mport *port; diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 8abbb2020af9..123092d8a984 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -277,6 +277,14 @@ config RTC_DRV_FM3130 This driver can also be built as a module. If so the module will be called rtc-fm3130. +config RTC_DRV_RX8581 + tristate "Epson RX-8581" + help + If you say yes here you will get support for the Epson RX-8581. + + This driver can also be built as a module. If so the module + will be called rtc-rx8581. + endif # I2C comment "SPI RTC drivers" @@ -302,6 +310,17 @@ config RTC_DRV_DS1305 This driver can also be built as a module. If so, the module will be called rtc-ds1305. +config RTC_DRV_DS1390 + tristate "Dallas/Maxim DS1390/93/94" + help + If you say yes here you get support for the DS1390/93/94 chips. + + This driver only supports the RTC feature, and not other chip + features such as alarms and trickle charging. + + This driver can also be built as a module. If so, the module + will be called rtc-ds1390. + config RTC_DRV_MAX6902 tristate "Maxim MAX6902" help @@ -468,6 +487,16 @@ config RTC_DRV_V3020 This driver can also be built as a module. If so, the module will be called rtc-v3020. +config RTC_DRV_WM8350 + tristate "Wolfson Microelectronics WM8350 RTC" + depends on MFD_WM8350 + help + If you say yes here you will get support for the RTC subsystem + of the Wolfson Microelectronics WM8350. + + This driver can also be built as a module. If so, the module + will be called "rtc-wm8350". + comment "on-CPU RTC drivers" config RTC_DRV_OMAP diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index e9e8474cc8fe..6e79c912bf9e 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_RTC_DRV_DS1302) += rtc-ds1302.o obj-$(CONFIG_RTC_DRV_DS1305) += rtc-ds1305.o obj-$(CONFIG_RTC_DRV_DS1307) += rtc-ds1307.o obj-$(CONFIG_RTC_DRV_DS1374) += rtc-ds1374.o +obj-$(CONFIG_RTC_DRV_DS1390) += rtc-ds1390.o obj-$(CONFIG_RTC_DRV_DS1511) += rtc-ds1511.o obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o @@ -57,6 +58,7 @@ obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o +obj-$(CONFIG_RTC_DRV_RX8581) += rtc-rx8581.o obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o @@ -66,4 +68,5 @@ obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl4030.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o +obj-$(CONFIG_RTC_DRV_WM8350) += rtc-wm8350.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o diff --git a/drivers/rtc/rtc-ds1390.c b/drivers/rtc/rtc-ds1390.c new file mode 100644 index 000000000000..599e976bf014 --- /dev/null +++ b/drivers/rtc/rtc-ds1390.c @@ -0,0 +1,220 @@ +/* + * rtc-ds1390.c -- driver for DS1390/93/94 + * + * Copyright (C) 2008 Mercury IMC Ltd + * Written by Mark Jackson <mpfj@mimc.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * NOTE : Currently this driver only supports the bare minimum for read + * and write the RTC. The extra features provided by the chip family + * (alarms, trickle charger, different control registers) are unavailable. + */ + +#include <linux/platform_device.h> +#include <linux/rtc.h> +#include <linux/spi/spi.h> +#include <linux/bcd.h> + +#define DS1390_REG_100THS 0x00 +#define DS1390_REG_SECONDS 0x01 +#define DS1390_REG_MINUTES 0x02 +#define DS1390_REG_HOURS 0x03 +#define DS1390_REG_DAY 0x04 +#define DS1390_REG_DATE 0x05 +#define DS1390_REG_MONTH_CENT 0x06 +#define DS1390_REG_YEAR 0x07 + +#define DS1390_REG_ALARM_100THS 0x08 +#define DS1390_REG_ALARM_SECONDS 0x09 +#define DS1390_REG_ALARM_MINUTES 0x0A +#define DS1390_REG_ALARM_HOURS 0x0B +#define DS1390_REG_ALARM_DAY_DATE 0x0C + +#define DS1390_REG_CONTROL 0x0D +#define DS1390_REG_STATUS 0x0E +#define DS1390_REG_TRICKLE 0x0F + +struct ds1390 { + struct rtc_device *rtc; + u8 txrx_buf[9]; /* cmd + 8 registers */ +}; + +static void ds1390_set_reg(struct device *dev, unsigned char address, + unsigned char data) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + + /* Set MSB to indicate write */ + chip->txrx_buf[0] = address | 0x80; + chip->txrx_buf[1] = data; + + /* do the i/o */ + spi_write_then_read(spi, chip->txrx_buf, 2, NULL, 0); +} + +static int ds1390_get_reg(struct device *dev, unsigned char address, + unsigned char *data) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + int status; + + if (!data) + return -EINVAL; + + /* Clear MSB to indicate read */ + chip->txrx_buf[0] = address & 0x7f; + /* do the i/o */ + status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 1); + if (status != 0) + return status; + + *data = chip->txrx_buf[1]; + + return 0; +} + +static int ds1390_get_datetime(struct device *dev, struct rtc_time *dt) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + int status; + + /* build the message */ + chip->txrx_buf[0] = DS1390_REG_SECONDS; + + /* do the i/o */ + status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 8); + if (status != 0) + return status; + + /* The chip sends data in this order: + * Seconds, Minutes, Hours, Day, Date, Month / Century, Year */ + dt->tm_sec = bcd2bin(chip->txrx_buf[0]); + dt->tm_min = bcd2bin(chip->txrx_buf[1]); + dt->tm_hour = bcd2bin(chip->txrx_buf[2]); + dt->tm_wday = bcd2bin(chip->txrx_buf[3]); + dt->tm_mday = bcd2bin(chip->txrx_buf[4]); + /* mask off century bit */ + dt->tm_mon = bcd2bin(chip->txrx_buf[5] & 0x7f) - 1; + /* adjust for century bit */ + dt->tm_year = bcd2bin(chip->txrx_buf[6]) + ((chip->txrx_buf[5] & 0x80) ? 100 : 0); + + return rtc_valid_tm(dt); +} + +static int ds1390_set_datetime(struct device *dev, struct rtc_time *dt) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + + /* build the message */ + chip->txrx_buf[0] = DS1390_REG_SECONDS | 0x80; + chip->txrx_buf[1] = bin2bcd(dt->tm_sec); + chip->txrx_buf[2] = bin2bcd(dt->tm_min); + chip->txrx_buf[3] = bin2bcd(dt->tm_hour); + chip->txrx_buf[4] = bin2bcd(dt->tm_wday); + chip->txrx_buf[5] = bin2bcd(dt->tm_mday); + chip->txrx_buf[6] = bin2bcd(dt->tm_mon + 1) | + ((dt->tm_year > 99) ? 0x80 : 0x00); + chip->txrx_buf[7] = bin2bcd(dt->tm_year % 100); + + /* do the i/o */ + return spi_write_then_read(spi, chip->txrx_buf, 8, NULL, 0); +} + +static int ds1390_read_time(struct device *dev, struct rtc_time *tm) +{ + return ds1390_get_datetime(dev, tm); +} + +static int ds1390_set_time(struct device *dev, struct rtc_time *tm) +{ + return ds1390_set_datetime(dev, tm); +} + +static const struct rtc_class_ops ds1390_rtc_ops = { + .read_time = ds1390_read_time, + .set_time = ds1390_set_time, +}; + +static int __devinit ds1390_probe(struct spi_device *spi) +{ + struct rtc_device *rtc; + unsigned char tmp; + struct ds1390 *chip; + int res; + + printk(KERN_DEBUG "DS1390 SPI RTC driver\n"); + + rtc = rtc_device_register("ds1390", + &spi->dev, &ds1390_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + printk(KERN_ALERT "RTC : unable to register device\n"); + return PTR_ERR(rtc); + } + + spi->mode = SPI_MODE_3; + spi->bits_per_word = 8; + spi_setup(spi); + + chip = kzalloc(sizeof *chip, GFP_KERNEL); + if (!chip) { + printk(KERN_ALERT "RTC : unable to allocate device memory\n"); + rtc_device_unregister(rtc); + return -ENOMEM; + } + chip->rtc = rtc; + dev_set_drvdata(&spi->dev, chip); + + res = ds1390_get_reg(&spi->dev, DS1390_REG_SECONDS, &tmp); + if (res) { + printk(KERN_ALERT "RTC : unable to read device\n"); + rtc_device_unregister(rtc); + return res; + } + + return 0; +} + +static int __devexit ds1390_remove(struct spi_device *spi) +{ + struct ds1390 *chip = platform_get_drvdata(spi); + struct rtc_device *rtc = chip->rtc; + + if (rtc) + rtc_device_unregister(rtc); + + kfree(chip); + + return 0; +} + +static struct spi_driver ds1390_driver = { + .driver = { + .name = "rtc-ds1390", + .owner = THIS_MODULE, + }, + .probe = ds1390_probe, + .remove = __devexit_p(ds1390_remove), +}; + +static __init int ds1390_init(void) +{ + return spi_register_driver(&ds1390_driver); +} +module_init(ds1390_init); + +static __exit void ds1390_exit(void) +{ + spi_unregister_driver(&ds1390_driver); +} +module_exit(ds1390_exit); + +MODULE_DESCRIPTION("DS1390/93/94 SPI RTC driver"); +MODULE_AUTHOR("Mark Jackson <mpfj@mimc.co.uk>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-ds1672.c b/drivers/rtc/rtc-ds1672.c index 341d7a5b45a2..4e91419e8911 100644 --- a/drivers/rtc/rtc-ds1672.c +++ b/drivers/rtc/rtc-ds1672.c @@ -209,12 +209,18 @@ static int ds1672_probe(struct i2c_client *client, return err; } +static struct i2c_device_id ds1672_id[] = { + { "ds1672", 0 }, + { } +}; + static struct i2c_driver ds1672_driver = { .driver = { .name = "rtc-ds1672", }, .probe = &ds1672_probe, .remove = &ds1672_remove, + .id_table = ds1672_id, }; static int __init ds1672_init(void) diff --git a/drivers/rtc/rtc-max6900.c b/drivers/rtc/rtc-max6900.c index 80782798763f..a4f6665ab3c5 100644 --- a/drivers/rtc/rtc-max6900.c +++ b/drivers/rtc/rtc-max6900.c @@ -247,12 +247,18 @@ max6900_probe(struct i2c_client *client, const struct i2c_device_id *id) return 0; } +static struct i2c_device_id max6900_id[] = { + { "max6900", 0 }, + { } +}; + static struct i2c_driver max6900_driver = { .driver = { .name = "rtc-max6900", }, .probe = max6900_probe, .remove = max6900_remove, + .id_table = max6900_id, }; static int __init max6900_init(void) diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c new file mode 100644 index 000000000000..c9522f3bc21c --- /dev/null +++ b/drivers/rtc/rtc-rx8581.c @@ -0,0 +1,281 @@ +/* + * An I2C driver for the Epson RX8581 RTC + * + * Author: Martyn Welch <martyn.welch@gefanuc.com> + * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Based on: rtc-pcf8563.c (An I2C driver for the Philips PCF8563 RTC) + * Copyright 2005-06 Tower Technologies + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/bcd.h> +#include <linux/rtc.h> +#include <linux/log2.h> + +#define DRV_VERSION "0.1" + +#define RX8581_REG_SC 0x00 /* Second in BCD */ +#define RX8581_REG_MN 0x01 /* Minute in BCD */ +#define RX8581_REG_HR 0x02 /* Hour in BCD */ +#define RX8581_REG_DW 0x03 /* Day of Week */ +#define RX8581_REG_DM 0x04 /* Day of Month in BCD */ +#define RX8581_REG_MO 0x05 /* Month in BCD */ +#define RX8581_REG_YR 0x06 /* Year in BCD */ +#define RX8581_REG_RAM 0x07 /* RAM */ +#define RX8581_REG_AMN 0x08 /* Alarm Min in BCD*/ +#define RX8581_REG_AHR 0x09 /* Alarm Hour in BCD */ +#define RX8581_REG_ADM 0x0A +#define RX8581_REG_ADW 0x0A +#define RX8581_REG_TMR0 0x0B +#define RX8581_REG_TMR1 0x0C +#define RX8581_REG_EXT 0x0D /* Extension Register */ +#define RX8581_REG_FLAG 0x0E /* Flag Register */ +#define RX8581_REG_CTRL 0x0F /* Control Register */ + + +/* Flag Register bit definitions */ +#define RX8581_FLAG_UF 0x20 /* Update */ +#define RX8581_FLAG_TF 0x10 /* Timer */ +#define RX8581_FLAG_AF 0x08 /* Alarm */ +#define RX8581_FLAG_VLF 0x02 /* Voltage Low */ + +/* Control Register bit definitions */ +#define RX8581_CTRL_UIE 0x20 /* Update Interrupt Enable */ +#define RX8581_CTRL_TIE 0x10 /* Timer Interrupt Enable */ +#define RX8581_CTRL_AIE 0x08 /* Alarm Interrupt Enable */ +#define RX8581_CTRL_STOP 0x02 /* STOP bit */ +#define RX8581_CTRL_RESET 0x01 /* RESET bit */ + +static struct i2c_driver rx8581_driver; + +/* + * In the routines that deal directly with the rx8581 hardware, we use + * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. + */ +static int rx8581_get_datetime(struct i2c_client *client, struct rtc_time *tm) +{ + unsigned char date[7]; + int data, err; + + /* First we ensure that the "update flag" is not set, we read the + * time and date then re-read the "update flag". If the update flag + * has been set, we know that the time has changed during the read so + * we repeat the whole process again. + */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG); + if (data < 0) { + dev_err(&client->dev, "Unable to read device flags\n"); + return -EIO; + } + + do { + /* If update flag set, clear it */ + if (data & RX8581_FLAG_UF) { + err = i2c_smbus_write_byte_data(client, + RX8581_REG_FLAG, (data & ~RX8581_FLAG_UF)); + if (err != 0) { + dev_err(&client->dev, "Unable to write device " + "flags\n"); + return -EIO; + } + } + + /* Now read time and date */ + err = i2c_smbus_read_i2c_block_data(client, RX8581_REG_SC, + 7, date); + if (err < 0) { + dev_err(&client->dev, "Unable to read date\n"); + return -EIO; + } + + /* Check flag register */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG); + if (data < 0) { + dev_err(&client->dev, "Unable to read device flags\n"); + return -EIO; + } + } while (data & RX8581_FLAG_UF); + + if (data & RX8581_FLAG_VLF) + dev_info(&client->dev, + "low voltage detected, date/time is not reliable.\n"); + + dev_dbg(&client->dev, + "%s: raw data is sec=%02x, min=%02x, hr=%02x, " + "wday=%02x, mday=%02x, mon=%02x, year=%02x\n", + __func__, + date[0], date[1], date[2], date[3], date[4], date[5], date[6]); + + tm->tm_sec = bcd2bin(date[RX8581_REG_SC] & 0x7F); + tm->tm_min = bcd2bin(date[RX8581_REG_MN] & 0x7F); + tm->tm_hour = bcd2bin(date[RX8581_REG_HR] & 0x3F); /* rtc hr 0-23 */ + tm->tm_wday = ilog2(date[RX8581_REG_DW] & 0x7F); + tm->tm_mday = bcd2bin(date[RX8581_REG_DM] & 0x3F); + tm->tm_mon = bcd2bin(date[RX8581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ + tm->tm_year = bcd2bin(date[RX8581_REG_YR]); + if (tm->tm_year < 70) + tm->tm_year += 100; /* assume we are in 1970...2069 */ + + + dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __func__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + err = rtc_valid_tm(tm); + if (err < 0) + dev_err(&client->dev, "retrieved date/time is not valid.\n"); + + return err; +} + +static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm) +{ + int data, err; + unsigned char buf[7]; + + dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __func__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + /* hours, minutes and seconds */ + buf[RX8581_REG_SC] = bin2bcd(tm->tm_sec); + buf[RX8581_REG_MN] = bin2bcd(tm->tm_min); + buf[RX8581_REG_HR] = bin2bcd(tm->tm_hour); + + buf[RX8581_REG_DM] = bin2bcd(tm->tm_mday); + + /* month, 1 - 12 */ + buf[RX8581_REG_MO] = bin2bcd(tm->tm_mon + 1); + + /* year and century */ + buf[RX8581_REG_YR] = bin2bcd(tm->tm_year % 100); + buf[RX8581_REG_DW] = (0x1 << tm->tm_wday); + + /* Stop the clock */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL); + if (data < 0) { + dev_err(&client->dev, "Unable to read control register\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG, + (data | RX8581_CTRL_STOP)); + if (err < 0) { + dev_err(&client->dev, "Unable to write control register\n"); + return -EIO; + } + + /* write register's data */ + err = i2c_smbus_write_i2c_block_data(client, RX8581_REG_SC, 7, buf); + if (err < 0) { + dev_err(&client->dev, "Unable to write to date registers\n"); + return -EIO; + } + + /* Restart the clock */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL); + if (data < 0) { + dev_err(&client->dev, "Unable to read control register\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG, + (data | ~(RX8581_CTRL_STOP))); + if (err != 0) { + dev_err(&client->dev, "Unable to write control register\n"); + return -EIO; + } + + return 0; +} + +static int rx8581_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + return rx8581_get_datetime(to_i2c_client(dev), tm); +} + +static int rx8581_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + return rx8581_set_datetime(to_i2c_client(dev), tm); +} + +static const struct rtc_class_ops rx8581_rtc_ops = { + .read_time = rx8581_rtc_read_time, + .set_time = rx8581_rtc_set_time, +}; + +static int __devinit rx8581_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct rtc_device *rtc; + + dev_dbg(&client->dev, "%s\n", __func__); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -ENODEV; + + dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); + + rtc = rtc_device_register(rx8581_driver.driver.name, + &client->dev, &rx8581_rtc_ops, THIS_MODULE); + + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + i2c_set_clientdata(client, rtc); + + return 0; +} + +static int __devexit rx8581_remove(struct i2c_client *client) +{ + struct rtc_device *rtc = i2c_get_clientdata(client); + + rtc_device_unregister(rtc); + + return 0; +} + +static const struct i2c_device_id rx8581_id[] = { + { "rx8581", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, rx8581_id); + +static struct i2c_driver rx8581_driver = { + .driver = { + .name = "rtc-rx8581", + .owner = THIS_MODULE, + }, + .probe = rx8581_probe, + .remove = __devexit_p(rx8581_remove), + .id_table = rx8581_id, +}; + +static int __init rx8581_init(void) +{ + return i2c_add_driver(&rx8581_driver); +} + +static void __exit rx8581_exit(void) +{ + i2c_del_driver(&rx8581_driver); +} + +MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com>"); +MODULE_DESCRIPTION("Epson RX-8581 RTC driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_init(rx8581_init); +module_exit(rx8581_exit); diff --git a/drivers/rtc/rtc-starfire.c b/drivers/rtc/rtc-starfire.c index 7ccb0dd700af..5be98bfd7ed3 100644 --- a/drivers/rtc/rtc-starfire.c +++ b/drivers/rtc/rtc-starfire.c @@ -6,7 +6,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> -#include <linux/time.h> #include <linux/rtc.h> #include <linux/platform_device.h> @@ -16,11 +15,6 @@ MODULE_AUTHOR("David S. Miller <davem@davemloft.net>"); MODULE_DESCRIPTION("Starfire RTC driver"); MODULE_LICENSE("GPL"); -struct starfire_rtc { - struct rtc_device *rtc; - spinlock_t lock; -}; - static u32 starfire_get_time(void) { static char obp_gettod[32]; @@ -35,64 +29,31 @@ static u32 starfire_get_time(void) static int starfire_read_time(struct device *dev, struct rtc_time *tm) { - struct starfire_rtc *p = dev_get_drvdata(dev); - unsigned long flags, secs; - - spin_lock_irqsave(&p->lock, flags); - secs = starfire_get_time(); - spin_unlock_irqrestore(&p->lock, flags); - - rtc_time_to_tm(secs, tm); - - return 0; -} - -static int starfire_set_time(struct device *dev, struct rtc_time *tm) -{ - unsigned long secs; - int err; - - err = rtc_tm_to_time(tm, &secs); - if (err) - return err; - - /* Do nothing, time is set using the service processor - * console on this platform. - */ - return 0; + rtc_time_to_tm(starfire_get_time(), tm); + return rtc_valid_tm(tm); } static const struct rtc_class_ops starfire_rtc_ops = { .read_time = starfire_read_time, - .set_time = starfire_set_time, }; -static int __devinit starfire_rtc_probe(struct platform_device *pdev) +static int __init starfire_rtc_probe(struct platform_device *pdev) { - struct starfire_rtc *p = kzalloc(sizeof(*p), GFP_KERNEL); - - if (!p) - return -ENOMEM; + struct rtc_device *rtc = rtc_device_register("starfire", &pdev->dev, + &starfire_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); - spin_lock_init(&p->lock); + platform_set_drvdata(pdev, rtc); - p->rtc = rtc_device_register("starfire", &pdev->dev, - &starfire_rtc_ops, THIS_MODULE); - if (IS_ERR(p->rtc)) { - int err = PTR_ERR(p->rtc); - kfree(p); - return err; - } - platform_set_drvdata(pdev, p); return 0; } -static int __devexit starfire_rtc_remove(struct platform_device *pdev) +static int __exit starfire_rtc_remove(struct platform_device *pdev) { - struct starfire_rtc *p = platform_get_drvdata(pdev); + struct rtc_device *rtc = platform_get_drvdata(pdev); - rtc_device_unregister(p->rtc); - kfree(p); + rtc_device_unregister(rtc); return 0; } @@ -102,13 +63,12 @@ static struct platform_driver starfire_rtc_driver = { .name = "rtc-starfire", .owner = THIS_MODULE, }, - .probe = starfire_rtc_probe, - .remove = __devexit_p(starfire_rtc_remove), + .remove = __exit_p(starfire_rtc_remove), }; static int __init starfire_rtc_init(void) { - return platform_driver_register(&starfire_rtc_driver); + return platform_driver_probe(&starfire_rtc_driver, starfire_rtc_probe); } static void __exit starfire_rtc_exit(void) diff --git a/drivers/rtc/rtc-sun4v.c b/drivers/rtc/rtc-sun4v.c index 2012ccbb4a53..5b2261052a65 100644 --- a/drivers/rtc/rtc-sun4v.c +++ b/drivers/rtc/rtc-sun4v.c @@ -1,4 +1,4 @@ -/* rtc-sun4c.c: Hypervisor based RTC for SUN4V systems. +/* rtc-sun4v.c: Hypervisor based RTC for SUN4V systems. * * Copyright (C) 2008 David S. Miller <davem@davemloft.net> */ @@ -7,21 +7,11 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/init.h> -#include <linux/time.h> #include <linux/rtc.h> #include <linux/platform_device.h> #include <asm/hypervisor.h> -MODULE_AUTHOR("David S. Miller <davem@davemloft.net>"); -MODULE_DESCRIPTION("SUN4V RTC driver"); -MODULE_LICENSE("GPL"); - -struct sun4v_rtc { - struct rtc_device *rtc; - spinlock_t lock; -}; - static unsigned long hypervisor_get_time(void) { unsigned long ret, time; @@ -45,15 +35,7 @@ retry: static int sun4v_read_time(struct device *dev, struct rtc_time *tm) { - struct sun4v_rtc *p = dev_get_drvdata(dev); - unsigned long flags, secs; - - spin_lock_irqsave(&p->lock, flags); - secs = hypervisor_get_time(); - spin_unlock_irqrestore(&p->lock, flags); - - rtc_time_to_tm(secs, tm); - + rtc_time_to_tm(hypervisor_get_time(), tm); return 0; } @@ -80,19 +62,14 @@ retry: static int sun4v_set_time(struct device *dev, struct rtc_time *tm) { - struct sun4v_rtc *p = dev_get_drvdata(dev); - unsigned long flags, secs; + unsigned long secs; int err; err = rtc_tm_to_time(tm, &secs); if (err) return err; - spin_lock_irqsave(&p->lock, flags); - err = hypervisor_set_time(secs); - spin_unlock_irqrestore(&p->lock, flags); - - return err; + return hypervisor_set_time(secs); } static const struct rtc_class_ops sun4v_rtc_ops = { @@ -100,33 +77,22 @@ static const struct rtc_class_ops sun4v_rtc_ops = { .set_time = sun4v_set_time, }; -static int __devinit sun4v_rtc_probe(struct platform_device *pdev) +static int __init sun4v_rtc_probe(struct platform_device *pdev) { - struct sun4v_rtc *p = kzalloc(sizeof(*p), GFP_KERNEL); - - if (!p) - return -ENOMEM; - - spin_lock_init(&p->lock); - - p->rtc = rtc_device_register("sun4v", &pdev->dev, + struct rtc_device *rtc = rtc_device_register("sun4v", &pdev->dev, &sun4v_rtc_ops, THIS_MODULE); - if (IS_ERR(p->rtc)) { - int err = PTR_ERR(p->rtc); - kfree(p); - return err; - } - platform_set_drvdata(pdev, p); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + platform_set_drvdata(pdev, rtc); return 0; } -static int __devexit sun4v_rtc_remove(struct platform_device *pdev) +static int __exit sun4v_rtc_remove(struct platform_device *pdev) { - struct sun4v_rtc *p = platform_get_drvdata(pdev); - - rtc_device_unregister(p->rtc); - kfree(p); + struct rtc_device *rtc = platform_get_drvdata(pdev); + rtc_device_unregister(rtc); return 0; } @@ -135,13 +101,12 @@ static struct platform_driver sun4v_rtc_driver = { .name = "rtc-sun4v", .owner = THIS_MODULE, }, - .probe = sun4v_rtc_probe, - .remove = __devexit_p(sun4v_rtc_remove), + .remove = __exit_p(sun4v_rtc_remove), }; static int __init sun4v_rtc_init(void) { - return platform_driver_register(&sun4v_rtc_driver); + return platform_driver_probe(&sun4v_rtc_driver, sun4v_rtc_probe); } static void __exit sun4v_rtc_exit(void) @@ -151,3 +116,7 @@ static void __exit sun4v_rtc_exit(void) module_init(sun4v_rtc_init); module_exit(sun4v_rtc_exit); + +MODULE_AUTHOR("David S. Miller <davem@davemloft.net>"); +MODULE_DESCRIPTION("SUN4V RTC driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c index abe87a4d2665..01d8da9afdc8 100644 --- a/drivers/rtc/rtc-twl4030.c +++ b/drivers/rtc/rtc-twl4030.c @@ -337,7 +337,7 @@ static int twl4030_rtc_ioctl(struct device *dev, unsigned int cmd, } #else -#define omap_rtc_ioctl NULL +#define twl4030_rtc_ioctl NULL #endif static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc) diff --git a/drivers/rtc/rtc-wm8350.c b/drivers/rtc/rtc-wm8350.c new file mode 100644 index 000000000000..5c5e3aa91385 --- /dev/null +++ b/drivers/rtc/rtc-wm8350.c @@ -0,0 +1,514 @@ +/* + * Real Time Clock driver for Wolfson Microelectronics WM8350 + * + * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood + * linux@wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/time.h> +#include <linux/rtc.h> +#include <linux/bcd.h> +#include <linux/interrupt.h> +#include <linux/ioctl.h> +#include <linux/completion.h> +#include <linux/mfd/wm8350/rtc.h> +#include <linux/mfd/wm8350/core.h> +#include <linux/delay.h> +#include <linux/platform_device.h> + +#define WM8350_SET_ALM_RETRIES 5 +#define WM8350_SET_TIME_RETRIES 5 +#define WM8350_GET_TIME_RETRIES 5 + +#define to_wm8350_from_rtc_dev(d) container_of(d, struct wm8350, rtc.pdev.dev) + +/* + * Read current time and date in RTC + */ +static int wm8350_rtc_readtime(struct device *dev, struct rtc_time *tm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + u16 time1[4], time2[4]; + int retries = WM8350_GET_TIME_RETRIES, ret; + + /* + * Read the time twice and compare. + * If time1 == time2, then time is valid else retry. + */ + do { + ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES, + 4, time1); + if (ret < 0) + return ret; + ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES, + 4, time2); + if (ret < 0) + return ret; + + if (memcmp(time1, time2, sizeof(time1)) == 0) { + tm->tm_sec = time1[0] & WM8350_RTC_SECS_MASK; + + tm->tm_min = (time1[0] & WM8350_RTC_MINS_MASK) + >> WM8350_RTC_MINS_SHIFT; + + tm->tm_hour = time1[1] & WM8350_RTC_HRS_MASK; + + tm->tm_wday = ((time1[1] >> WM8350_RTC_DAY_SHIFT) + & 0x7) - 1; + + tm->tm_mon = ((time1[2] & WM8350_RTC_MTH_MASK) + >> WM8350_RTC_MTH_SHIFT) - 1; + + tm->tm_mday = (time1[2] & WM8350_RTC_DATE_MASK); + + tm->tm_year = ((time1[3] & WM8350_RTC_YHUNDREDS_MASK) + >> WM8350_RTC_YHUNDREDS_SHIFT) * 100; + tm->tm_year += time1[3] & WM8350_RTC_YUNITS_MASK; + + tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, + tm->tm_year); + tm->tm_year -= 1900; + + dev_dbg(dev, "Read (%d left): %04x %04x %04x %04x\n", + retries, + time1[0], time1[1], time1[2], time1[3]); + + return 0; + } + } while (retries--); + + dev_err(dev, "timed out reading RTC time\n"); + return -EIO; +} + +/* + * Set current time and date in RTC + */ +static int wm8350_rtc_settime(struct device *dev, struct rtc_time *tm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + u16 time[4]; + u16 rtc_ctrl; + int ret, retries = WM8350_SET_TIME_RETRIES; + + time[0] = tm->tm_sec; + time[0] |= tm->tm_min << WM8350_RTC_MINS_SHIFT; + time[1] = tm->tm_hour; + time[1] |= (tm->tm_wday + 1) << WM8350_RTC_DAY_SHIFT; + time[2] = tm->tm_mday; + time[2] |= (tm->tm_mon + 1) << WM8350_RTC_MTH_SHIFT; + time[3] = ((tm->tm_year + 1900) / 100) << WM8350_RTC_YHUNDREDS_SHIFT; + time[3] |= (tm->tm_year + 1900) % 100; + + dev_dbg(dev, "Setting: %04x %04x %04x %04x\n", + time[0], time[1], time[2], time[3]); + + /* Set RTC_SET to stop the clock */ + ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, WM8350_RTC_SET); + if (ret < 0) + return ret; + + /* Wait until confirmation of stopping */ + do { + rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + schedule_timeout_uninterruptible(msecs_to_jiffies(1)); + } while (retries-- && !(rtc_ctrl & WM8350_RTC_STS)); + + if (!retries) { + dev_err(dev, "timed out on set confirmation\n"); + return -EIO; + } + + /* Write time to RTC */ + ret = wm8350_block_write(wm8350, WM8350_RTC_SECONDS_MINUTES, 4, time); + if (ret < 0) + return ret; + + /* Clear RTC_SET to start the clock */ + ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_SET); + return ret; +} + +/* + * Read alarm time and date in RTC + */ +static int wm8350_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + u16 time[4]; + int ret; + + ret = wm8350_block_read(wm8350, WM8350_ALARM_SECONDS_MINUTES, 4, time); + if (ret < 0) + return ret; + + tm->tm_sec = time[0] & WM8350_RTC_ALMSECS_MASK; + if (tm->tm_sec == WM8350_RTC_ALMSECS_MASK) + tm->tm_sec = -1; + + tm->tm_min = time[0] & WM8350_RTC_ALMMINS_MASK; + if (tm->tm_min == WM8350_RTC_ALMMINS_MASK) + tm->tm_min = -1; + else + tm->tm_min >>= WM8350_RTC_ALMMINS_SHIFT; + + tm->tm_hour = time[1] & WM8350_RTC_ALMHRS_MASK; + if (tm->tm_hour == WM8350_RTC_ALMHRS_MASK) + tm->tm_hour = -1; + + tm->tm_wday = ((time[1] >> WM8350_RTC_ALMDAY_SHIFT) & 0x7) - 1; + if (tm->tm_wday > 7) + tm->tm_wday = -1; + + tm->tm_mon = time[2] & WM8350_RTC_ALMMTH_MASK; + if (tm->tm_mon == WM8350_RTC_ALMMTH_MASK) + tm->tm_mon = -1; + else + tm->tm_mon = (tm->tm_mon >> WM8350_RTC_ALMMTH_SHIFT) - 1; + + tm->tm_mday = (time[2] & WM8350_RTC_ALMDATE_MASK); + if (tm->tm_mday == WM8350_RTC_ALMDATE_MASK) + tm->tm_mday = -1; + + tm->tm_year = -1; + + alrm->enabled = !(time[3] & WM8350_RTC_ALMSTS); + + return 0; +} + +static int wm8350_rtc_stop_alarm(struct wm8350 *wm8350) +{ + int retries = WM8350_SET_ALM_RETRIES; + u16 rtc_ctrl; + int ret; + + /* Set RTC_SET to stop the clock */ + ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_ALMSET); + if (ret < 0) + return ret; + + /* Wait until confirmation of stopping */ + do { + rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + schedule_timeout_uninterruptible(msecs_to_jiffies(1)); + } while (retries-- && !(rtc_ctrl & WM8350_RTC_ALMSTS)); + + if (!(rtc_ctrl & WM8350_RTC_ALMSTS)) + return -ETIMEDOUT; + + return 0; +} + +static int wm8350_rtc_start_alarm(struct wm8350 *wm8350) +{ + int ret; + int retries = WM8350_SET_ALM_RETRIES; + u16 rtc_ctrl; + + ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_ALMSET); + if (ret < 0) + return ret; + + /* Wait until confirmation */ + do { + rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + schedule_timeout_uninterruptible(msecs_to_jiffies(1)); + } while (retries-- && rtc_ctrl & WM8350_RTC_ALMSTS); + + if (rtc_ctrl & WM8350_RTC_ALMSTS) + return -ETIMEDOUT; + + return 0; +} + +static int wm8350_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + u16 time[3]; + int ret; + + memset(time, 0, sizeof(time)); + + if (tm->tm_sec != -1) + time[0] |= tm->tm_sec; + else + time[0] |= WM8350_RTC_ALMSECS_MASK; + + if (tm->tm_min != -1) + time[0] |= tm->tm_min << WM8350_RTC_ALMMINS_SHIFT; + else + time[0] |= WM8350_RTC_ALMMINS_MASK; + + if (tm->tm_hour != -1) + time[1] |= tm->tm_hour; + else + time[1] |= WM8350_RTC_ALMHRS_MASK; + + if (tm->tm_wday != -1) + time[1] |= (tm->tm_wday + 1) << WM8350_RTC_ALMDAY_SHIFT; + else + time[1] |= WM8350_RTC_ALMDAY_MASK; + + if (tm->tm_mday != -1) + time[2] |= tm->tm_mday; + else + time[2] |= WM8350_RTC_ALMDATE_MASK; + + if (tm->tm_mon != -1) + time[2] |= (tm->tm_mon + 1) << WM8350_RTC_ALMMTH_SHIFT; + else + time[2] |= WM8350_RTC_ALMMTH_MASK; + + ret = wm8350_rtc_stop_alarm(wm8350); + if (ret < 0) + return ret; + + /* Write time to RTC */ + ret = wm8350_block_write(wm8350, WM8350_ALARM_SECONDS_MINUTES, + 3, time); + if (ret < 0) + return ret; + + if (alrm->enabled) + ret = wm8350_rtc_start_alarm(wm8350); + + return ret; +} + +/* + * Handle commands from user-space + */ +static int wm8350_rtc_ioctl(struct device *dev, unsigned int cmd, + unsigned long arg) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + + switch (cmd) { + case RTC_AIE_OFF: + return wm8350_rtc_stop_alarm(wm8350); + case RTC_AIE_ON: + return wm8350_rtc_start_alarm(wm8350); + + case RTC_UIE_OFF: + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); + break; + case RTC_UIE_ON: + wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_SEC); + break; + + default: + return -ENOIOCTLCMD; + } + + return 0; +} + +static void wm8350_rtc_alarm_handler(struct wm8350 *wm8350, int irq, + void *data) +{ + struct rtc_device *rtc = wm8350->rtc.rtc; + int ret; + + rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF); + + /* Make it one shot */ + ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_ALMSET); + if (ret != 0) { + dev_err(&(wm8350->rtc.pdev->dev), + "Failed to disable alarm: %d\n", ret); + } +} + +static void wm8350_rtc_update_handler(struct wm8350 *wm8350, int irq, + void *data) +{ + struct rtc_device *rtc = wm8350->rtc.rtc; + + rtc_update_irq(rtc, 1, RTC_IRQF | RTC_UF); +} + +static const struct rtc_class_ops wm8350_rtc_ops = { + .ioctl = wm8350_rtc_ioctl, + .read_time = wm8350_rtc_readtime, + .set_time = wm8350_rtc_settime, + .read_alarm = wm8350_rtc_readalarm, + .set_alarm = wm8350_rtc_setalarm, +}; + +#ifdef CONFIG_PM +static int wm8350_rtc_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev); + int ret = 0; + u16 reg; + + reg = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + + if (device_may_wakeup(&wm8350->rtc.pdev->dev) && + reg & WM8350_RTC_ALMSTS) { + ret = wm8350_rtc_stop_alarm(wm8350); + if (ret != 0) + dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n", + ret); + } + + return ret; +} + +static int wm8350_rtc_resume(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev); + int ret; + + if (wm8350->rtc.alarm_enabled) { + ret = wm8350_rtc_start_alarm(wm8350); + if (ret != 0) + dev_err(&pdev->dev, + "Failed to restart RTC alarm: %d\n", ret); + } + + return 0; +} + +#else +#define wm8350_rtc_suspend NULL +#define wm8350_rtc_resume NULL +#endif + +static int wm8350_rtc_probe(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + struct wm8350_rtc *wm_rtc = &wm8350->rtc; + int ret = 0; + u16 timectl, power5; + + timectl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + if (timectl & WM8350_RTC_BCD) { + dev_err(&pdev->dev, "RTC BCD mode not supported\n"); + return -EINVAL; + } + if (timectl & WM8350_RTC_12HR) { + dev_err(&pdev->dev, "RTC 12 hour mode not supported\n"); + return -EINVAL; + } + + /* enable the RTC if it's not already enabled */ + power5 = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5); + if (!(power5 & WM8350_RTC_TICK_ENA)) { + dev_info(wm8350->dev, "Starting RTC\n"); + + wm8350_reg_unlock(wm8350); + + ret = wm8350_set_bits(wm8350, WM8350_POWER_MGMT_5, + WM8350_RTC_TICK_ENA); + if (ret < 0) { + dev_err(&pdev->dev, "failed to enable RTC: %d\n", ret); + return ret; + } + + wm8350_reg_lock(wm8350); + } + + if (timectl & WM8350_RTC_STS) { + int retries; + + ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_SET); + if (ret < 0) { + dev_err(&pdev->dev, "failed to start: %d\n", ret); + return ret; + } + + retries = WM8350_SET_TIME_RETRIES; + do { + timectl = wm8350_reg_read(wm8350, + WM8350_RTC_TIME_CONTROL); + } while (timectl & WM8350_RTC_STS && retries--); + + if (retries == 0) { + dev_err(&pdev->dev, "failed to start: timeout\n"); + return -ENODEV; + } + } + + device_init_wakeup(&pdev->dev, 1); + + wm_rtc->rtc = rtc_device_register("wm8350", &pdev->dev, + &wm8350_rtc_ops, THIS_MODULE); + if (IS_ERR(wm_rtc->rtc)) { + ret = PTR_ERR(wm_rtc->rtc); + dev_err(&pdev->dev, "failed to register RTC: %d\n", ret); + return ret; + } + + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_PER); + + wm8350_register_irq(wm8350, WM8350_IRQ_RTC_SEC, + wm8350_rtc_update_handler, NULL); + + wm8350_register_irq(wm8350, WM8350_IRQ_RTC_ALM, + wm8350_rtc_alarm_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_ALM); + + return 0; +} + +static int __devexit wm8350_rtc_remove(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + struct wm8350_rtc *wm_rtc = &wm8350->rtc; + + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); + + wm8350_free_irq(wm8350, WM8350_IRQ_RTC_SEC); + wm8350_free_irq(wm8350, WM8350_IRQ_RTC_ALM); + + rtc_device_unregister(wm_rtc->rtc); + + return 0; +} + +static struct platform_driver wm8350_rtc_driver = { + .probe = wm8350_rtc_probe, + .remove = __devexit_p(wm8350_rtc_remove), + .suspend = wm8350_rtc_suspend, + .resume = wm8350_rtc_resume, + .driver = { + .name = "wm8350-rtc", + }, +}; + +static int __init wm8350_rtc_init(void) +{ + return platform_driver_register(&wm8350_rtc_driver); +} +module_init(wm8350_rtc_init); + +static void __exit wm8350_rtc_exit(void) +{ + platform_driver_unregister(&wm8350_rtc_driver); +} +module_exit(wm8350_rtc_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("RTC driver for the WM8350"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm8350-rtc"); diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 4b76fca64a6f..363bd1303d21 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -1746,6 +1746,11 @@ restart: goto restart; } + /* log sense for fatal error */ + if (cqr->status == DASD_CQR_FAILED) { + dasd_log_sense(cqr, &cqr->irb); + } + /* First of all call extended error reporting. */ if (dasd_eer_enabled(base) && cqr->status == DASD_CQR_FAILED) { diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index eb5f1b8bc57f..ec9c0bcf66ee 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -324,6 +324,9 @@ static int do_assign_storage(sclp_cmdw_t cmd, u16 rn) case 0x0120: break; default: + pr_warning("assign storage failed (cmd=0x%08x, " + "response=0x%04x, rn=0x%04x)\n", cmd, + sccb->header.response_code, rn); rc = -EIO; break; } diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 4e78c82194b4..4e4008325e28 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -874,11 +874,15 @@ void ccw_device_move_to_orphanage(struct work_struct *work) replacing_cdev = get_disc_ccwdev_by_dev_id(&dev_id, cdev); if (replacing_cdev) { sch_attach_disconnected_device(sch, replacing_cdev); + /* Release reference from get_disc_ccwdev_by_dev_id() */ + put_device(&cdev->dev); return; } replacing_cdev = get_orphaned_ccwdev_by_dev_id(css, &dev_id); if (replacing_cdev) { sch_attach_orphaned_device(sch, replacing_cdev); + /* Release reference from get_orphaned_ccwdev_by_dev_id() */ + put_device(&cdev->dev); return; } sch_create_and_recog_new_device(sch); diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c index ff4a6931bb8e..3d442444c618 100644 --- a/drivers/s390/kvm/kvm_virtio.c +++ b/drivers/s390/kvm/kvm_virtio.c @@ -322,13 +322,13 @@ static int __init kvm_devices_init(void) return rc; } - rc = vmem_add_mapping(PFN_PHYS(max_pfn), PAGE_SIZE); + rc = vmem_add_mapping(real_memory_size, PAGE_SIZE); if (rc) { s390_root_dev_unregister(kvm_root); return rc; } - kvm_devices = (void *) PFN_PHYS(max_pfn); + kvm_devices = (void *) real_memory_size; ctl_set_bit(0, 9); register_external_interrupt(0x2603, kvm_extint_handler); diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 3b56220fb900..3d4e3e3f3fc0 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -610,7 +610,8 @@ struct zfcp_port *zfcp_port_enqueue(struct zfcp_adapter *adapter, u64 wwpn, atomic_set_mask(status | ZFCP_STATUS_COMMON_REMOVE, &port->status); atomic_set(&port->refcount, 0); - dev_set_name(&port->sysfs_device, "0x%016llx", wwpn); + dev_set_name(&port->sysfs_device, "0x%016llx", + (unsigned long long)wwpn); port->sysfs_device.parent = &adapter->ccw_device->dev; port->sysfs_device.release = zfcp_sysfs_port_release; diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index b04038c74786..951a8d409d1d 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -116,7 +116,9 @@ static int zfcp_ccw_set_online(struct ccw_device *ccw_device) zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED, 85, NULL); zfcp_erp_wait(adapter); - goto out; + up(&zfcp_data.config_sema); + flush_work(&adapter->scan_work); + return 0; out_scsi_register: zfcp_erp_thread_kill(adapter); diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c index 060f5f2352ec..31012d58cfb7 100644 --- a/drivers/s390/scsi/zfcp_dbf.c +++ b/drivers/s390/scsi/zfcp_dbf.c @@ -30,7 +30,7 @@ static void zfcp_dbf_hexdump(debug_info_t *dbf, void *to, int to_len, dump->offset = offset; dump->size = min(from_len - offset, room); memcpy(dump->data, from + offset, dump->size); - debug_event(dbf, level, dump, dump->size); + debug_event(dbf, level, dump, dump->size + sizeof(*dump)); } } @@ -108,7 +108,7 @@ static int zfcp_dbf_view_header(debug_info_t *id, struct debug_view *view, t.tv_sec, t.tv_nsec); zfcp_dbf_out(&p, "cpu", "%02i", entry->id.fields.cpuid); } else { - zfcp_dbf_outd(&p, NULL, dump->data, dump->size, dump->offset, + zfcp_dbf_outd(&p, "", dump->data, dump->size, dump->offset, dump->total_size); if ((dump->offset + dump->size) == dump->total_size) p += sprintf(p, "\n"); @@ -366,6 +366,7 @@ static void zfcp_hba_dbf_view_response(char **p, break; zfcp_dbf_out(p, "scsi_cmnd", "0x%0Lx", r->u.fcp.cmnd); zfcp_dbf_out(p, "scsi_serial", "0x%016Lx", r->u.fcp.serial); + p += sprintf(*p, "\n"); break; case FSF_QTCB_OPEN_PORT_WITH_DID: @@ -465,7 +466,8 @@ static int zfcp_hba_dbf_view_format(debug_info_t *id, struct debug_view *view, else if (strncmp(r->tag, "berr", ZFCP_DBF_TAG_SIZE) == 0) zfcp_hba_dbf_view_berr(&p, &r->u.berr); - p += sprintf(p, "\n"); + if (strncmp(r->tag, "resp", ZFCP_DBF_TAG_SIZE) != 0) + p += sprintf(p, "\n"); return p - out_buf; } @@ -880,6 +882,7 @@ void zfcp_san_dbf_event_ct_request(struct zfcp_fsf_req *fsf_req) struct ct_hdr *hdr = sg_virt(ct->req); struct zfcp_san_dbf_record *r = &adapter->san_dbf_buf; struct zfcp_san_dbf_record_ct_request *oct = &r->u.ct_req; + int level = 3; unsigned long flags; spin_lock_irqsave(&adapter->san_dbf_lock, flags); @@ -896,9 +899,10 @@ void zfcp_san_dbf_event_ct_request(struct zfcp_fsf_req *fsf_req) oct->options = hdr->options; oct->max_res_size = hdr->max_res_size; oct->len = min((int)ct->req->length - (int)sizeof(struct ct_hdr), - ZFCP_DBF_CT_PAYLOAD); - memcpy(oct->payload, (void *)hdr + sizeof(struct ct_hdr), oct->len); - debug_event(adapter->san_dbf, 3, r, sizeof(*r)); + ZFCP_DBF_SAN_MAX_PAYLOAD); + debug_event(adapter->san_dbf, level, r, sizeof(*r)); + zfcp_dbf_hexdump(adapter->san_dbf, r, sizeof(*r), level, + (void *)hdr + sizeof(struct ct_hdr), oct->len); spin_unlock_irqrestore(&adapter->san_dbf_lock, flags); } @@ -914,6 +918,7 @@ void zfcp_san_dbf_event_ct_response(struct zfcp_fsf_req *fsf_req) struct ct_hdr *hdr = sg_virt(ct->resp); struct zfcp_san_dbf_record *r = &adapter->san_dbf_buf; struct zfcp_san_dbf_record_ct_response *rct = &r->u.ct_resp; + int level = 3; unsigned long flags; spin_lock_irqsave(&adapter->san_dbf_lock, flags); @@ -929,9 +934,10 @@ void zfcp_san_dbf_event_ct_response(struct zfcp_fsf_req *fsf_req) rct->expl = hdr->reason_code_expl; rct->vendor_unique = hdr->vendor_unique; rct->len = min((int)ct->resp->length - (int)sizeof(struct ct_hdr), - ZFCP_DBF_CT_PAYLOAD); - memcpy(rct->payload, (void *)hdr + sizeof(struct ct_hdr), rct->len); - debug_event(adapter->san_dbf, 3, r, sizeof(*r)); + ZFCP_DBF_SAN_MAX_PAYLOAD); + debug_event(adapter->san_dbf, level, r, sizeof(*r)); + zfcp_dbf_hexdump(adapter->san_dbf, r, sizeof(*r), level, + (void *)hdr + sizeof(struct ct_hdr), rct->len); spin_unlock_irqrestore(&adapter->san_dbf_lock, flags); } @@ -954,7 +960,7 @@ static void zfcp_san_dbf_event_els(const char *tag, int level, rec->u.els.ls_code = ls_code; debug_event(adapter->san_dbf, level, rec, sizeof(*rec)); zfcp_dbf_hexdump(adapter->san_dbf, rec, sizeof(*rec), level, - buffer, min(buflen, ZFCP_DBF_ELS_MAX_PAYLOAD)); + buffer, min(buflen, ZFCP_DBF_SAN_MAX_PAYLOAD)); spin_unlock_irqrestore(&adapter->san_dbf_lock, flags); } @@ -1008,8 +1014,6 @@ static int zfcp_san_dbf_view_format(debug_info_t *id, struct debug_view *view, char *out_buf, const char *in_buf) { struct zfcp_san_dbf_record *r = (struct zfcp_san_dbf_record *)in_buf; - char *buffer = NULL; - int buflen = 0, total = 0; char *p = out_buf; if (strncmp(r->tag, "dump", ZFCP_DBF_TAG_SIZE) == 0) @@ -1029,9 +1033,6 @@ static int zfcp_san_dbf_view_format(debug_info_t *id, struct debug_view *view, zfcp_dbf_out(&p, "gs_subtype", "0x%02x", ct->gs_subtype); zfcp_dbf_out(&p, "options", "0x%02x", ct->options); zfcp_dbf_out(&p, "max_res_size", "0x%04x", ct->max_res_size); - total = ct->len; - buffer = ct->payload; - buflen = min(total, ZFCP_DBF_CT_PAYLOAD); } else if (strncmp(r->tag, "rctc", ZFCP_DBF_TAG_SIZE) == 0) { struct zfcp_san_dbf_record_ct_response *ct = &r->u.ct_resp; zfcp_dbf_out(&p, "cmd_rsp_code", "0x%04x", ct->cmd_rsp_code); @@ -1039,23 +1040,12 @@ static int zfcp_san_dbf_view_format(debug_info_t *id, struct debug_view *view, zfcp_dbf_out(&p, "reason_code", "0x%02x", ct->reason_code); zfcp_dbf_out(&p, "reason_code_expl", "0x%02x", ct->expl); zfcp_dbf_out(&p, "vendor_unique", "0x%02x", ct->vendor_unique); - total = ct->len; - buffer = ct->payload; - buflen = min(total, ZFCP_DBF_CT_PAYLOAD); } else if (strncmp(r->tag, "oels", ZFCP_DBF_TAG_SIZE) == 0 || strncmp(r->tag, "rels", ZFCP_DBF_TAG_SIZE) == 0 || strncmp(r->tag, "iels", ZFCP_DBF_TAG_SIZE) == 0) { struct zfcp_san_dbf_record_els *els = &r->u.els; zfcp_dbf_out(&p, "ls_code", "0x%02x", els->ls_code); - total = els->len; - buffer = els->payload; - buflen = min(total, ZFCP_DBF_ELS_PAYLOAD); } - - zfcp_dbf_outd(&p, "payload", buffer, buflen, 0, total); - if (buflen == total) - p += sprintf(p, "\n"); - return p - out_buf; } diff --git a/drivers/s390/scsi/zfcp_dbf.h b/drivers/s390/scsi/zfcp_dbf.h index e8f450801fea..5d6b2dff855b 100644 --- a/drivers/s390/scsi/zfcp_dbf.h +++ b/drivers/s390/scsi/zfcp_dbf.h @@ -163,8 +163,6 @@ struct zfcp_san_dbf_record_ct_request { u8 options; u16 max_res_size; u32 len; -#define ZFCP_DBF_CT_PAYLOAD 24 - u8 payload[ZFCP_DBF_CT_PAYLOAD]; } __attribute__ ((packed)); struct zfcp_san_dbf_record_ct_response { @@ -174,15 +172,11 @@ struct zfcp_san_dbf_record_ct_response { u8 expl; u8 vendor_unique; u32 len; - u8 payload[ZFCP_DBF_CT_PAYLOAD]; } __attribute__ ((packed)); struct zfcp_san_dbf_record_els { u8 ls_code; u32 len; -#define ZFCP_DBF_ELS_PAYLOAD 32 -#define ZFCP_DBF_ELS_MAX_PAYLOAD 1024 - u8 payload[ZFCP_DBF_ELS_PAYLOAD]; } __attribute__ ((packed)); struct zfcp_san_dbf_record { @@ -196,6 +190,8 @@ struct zfcp_san_dbf_record { struct zfcp_san_dbf_record_ct_response ct_resp; struct zfcp_san_dbf_record_els els; } u; +#define ZFCP_DBF_SAN_MAX_PAYLOAD 1024 + u8 payload[32]; } __attribute__ ((packed)); struct zfcp_scsi_dbf_record { diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 9040f738ff33..c557ba34e1aa 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -472,6 +472,7 @@ static void zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *act) ZFCP_STATUS_ERP_TIMEDOUT)) { act->fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED; zfcp_rec_dbf_event_action(142, act); + act->fsf_req->erp_action = NULL; } if (act->status & ZFCP_STATUS_ERP_TIMEDOUT) zfcp_rec_dbf_event_action(143, act); @@ -719,7 +720,6 @@ static int zfcp_erp_adapter_strategy_generic(struct zfcp_erp_action *act, goto failed_openfcp; atomic_set_mask(ZFCP_STATUS_COMMON_OPEN, &act->adapter->status); - schedule_work(&act->adapter->scan_work); return ZFCP_ERP_SUCCEEDED; @@ -1185,7 +1185,9 @@ static void zfcp_erp_scsi_scan(struct work_struct *work) container_of(work, struct zfcp_erp_add_work, work); struct zfcp_unit *unit = p->unit; struct fc_rport *rport = unit->port->rport; - scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, + + if (rport && rport->port_state == FC_PORTSTATE_ONLINE) + scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, scsilun_to_int((struct scsi_lun *)&unit->fcp_lun), 0); atomic_clear_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status); zfcp_unit_put(unit); @@ -1281,6 +1283,8 @@ static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result) case ZFCP_ERP_ACTION_REOPEN_ADAPTER: if (result != ZFCP_ERP_SUCCEEDED) zfcp_erp_rports_del(adapter); + else + schedule_work(&adapter->scan_work); zfcp_adapter_put(adapter); break; } diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 1a7c80a77ff5..8aab3091a7b1 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -50,7 +50,8 @@ static int zfcp_wka_port_get(struct zfcp_wka_port *wka_port) if (mutex_lock_interruptible(&wka_port->mutex)) return -ERESTARTSYS; - if (wka_port->status != ZFCP_WKA_PORT_ONLINE) { + if (wka_port->status == ZFCP_WKA_PORT_OFFLINE || + wka_port->status == ZFCP_WKA_PORT_CLOSING) { wka_port->status = ZFCP_WKA_PORT_OPENING; if (zfcp_fsf_open_wka_port(wka_port)) wka_port->status = ZFCP_WKA_PORT_OFFLINE; @@ -125,8 +126,7 @@ static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range, read_lock_irqsave(&zfcp_data.config_lock, flags); list_for_each_entry(port, &fsf_req->adapter->port_list_head, list) { - /* FIXME: ZFCP_STATUS_PORT_DID_DID check is racy */ - if (!(atomic_read(&port->status) & ZFCP_STATUS_PORT_DID_DID)) + if (!(atomic_read(&port->status) & ZFCP_STATUS_PORT_PHYS_OPEN)) /* Try to connect to unused ports anyway. */ zfcp_erp_port_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED, @@ -610,7 +610,6 @@ int zfcp_scan_ports(struct zfcp_adapter *adapter) int ret, i; struct zfcp_gpn_ft *gpn_ft; - zfcp_erp_wait(adapter); /* wait until adapter is finished with ERP */ if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT) return 0; diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 5ae1d497e5ed..dc0367690405 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -683,6 +683,7 @@ static struct zfcp_fsf_req *zfcp_fsf_alloc_noqtcb(mempool_t *pool) if (!req) return NULL; memset(req, 0, sizeof(*req)); + req->pool = pool; return req; } @@ -769,28 +770,24 @@ static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_adapter *adapter, static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) { struct zfcp_adapter *adapter = req->adapter; - struct zfcp_qdio_queue *req_q = &adapter->req_q; + unsigned long flags; int idx; /* put allocated FSF request into hash table */ - spin_lock(&adapter->req_list_lock); + spin_lock_irqsave(&adapter->req_list_lock, flags); idx = zfcp_reqlist_hash(req->req_id); list_add_tail(&req->list, &adapter->req_list[idx]); - spin_unlock(&adapter->req_list_lock); + spin_unlock_irqrestore(&adapter->req_list_lock, flags); - req->qdio_outb_usage = atomic_read(&req_q->count); + req->qdio_outb_usage = atomic_read(&adapter->req_q.count); req->issued = get_clock(); if (zfcp_qdio_send(req)) { - /* Queues are down..... */ del_timer(&req->timer); - spin_lock(&adapter->req_list_lock); - zfcp_reqlist_remove(adapter, req); - spin_unlock(&adapter->req_list_lock); - /* undo changes in request queue made for this request */ - atomic_add(req->sbal_number, &req_q->count); - req_q->first -= req->sbal_number; - req_q->first += QDIO_MAX_BUFFERS_PER_Q; - req_q->first %= QDIO_MAX_BUFFERS_PER_Q; /* wrap */ + spin_lock_irqsave(&adapter->req_list_lock, flags); + /* lookup request again, list might have changed */ + if (zfcp_reqlist_find_safe(adapter, req)) + zfcp_reqlist_remove(adapter, req); + spin_unlock_irqrestore(&adapter->req_list_lock, flags); zfcp_erp_adapter_reopen(adapter, 0, 116, req); return -EIO; } @@ -933,8 +930,10 @@ struct zfcp_fsf_req *zfcp_fsf_abort_fcp_command(unsigned long old_req_id, goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND, req_flags, adapter->pool.fsf_req_abort); - if (IS_ERR(req)) + if (IS_ERR(req)) { + req = NULL; goto out; + } if (unlikely(!(atomic_read(&unit->status) & ZFCP_STATUS_COMMON_UNBLOCKED))) @@ -1587,6 +1586,7 @@ static void zfcp_fsf_open_wka_port_handler(struct zfcp_fsf_req *req) wka_port->status = ZFCP_WKA_PORT_OFFLINE; break; case FSF_PORT_ALREADY_OPEN: + break; case FSF_GOOD: wka_port->handle = header->port_handle; wka_port->status = ZFCP_WKA_PORT_ONLINE; @@ -2116,18 +2116,21 @@ static inline void zfcp_fsf_trace_latency(struct zfcp_fsf_req *fsf_req) static void zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *req) { - struct scsi_cmnd *scpnt = req->data; + struct scsi_cmnd *scpnt; struct fcp_rsp_iu *fcp_rsp_iu = (struct fcp_rsp_iu *) &(req->qtcb->bottom.io.fcp_rsp); u32 sns_len; char *fcp_rsp_info = (unsigned char *) &fcp_rsp_iu[1]; unsigned long flags; - if (unlikely(!scpnt)) - return; - read_lock_irqsave(&req->adapter->abort_lock, flags); + scpnt = req->data; + if (unlikely(!scpnt)) { + read_unlock_irqrestore(&req->adapter->abort_lock, flags); + return; + } + if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ABORTED)) { set_host_byte(scpnt, DID_SOFT_ERROR); set_driver_byte(scpnt, SUGGEST_RETRY); @@ -2445,8 +2448,10 @@ struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_adapter *adapter, goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags, adapter->pool.fsf_req_scsi); - if (IS_ERR(req)) + if (IS_ERR(req)) { + req = NULL; goto out; + } req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT; req->data = unit; diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index ca8f85f3dad4..468c880f8b6d 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -24,14 +24,10 @@ char *zfcp_get_fcp_sns_info_ptr(struct fcp_rsp_iu *fcp_rsp_iu) static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt) { struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata; - WARN_ON(!unit); - if (unit) { - atomic_clear_mask(ZFCP_STATUS_UNIT_REGISTERED, &unit->status); - sdpnt->hostdata = NULL; - unit->device = NULL; - zfcp_erp_unit_failed(unit, 12, NULL); - zfcp_unit_put(unit); - } + atomic_clear_mask(ZFCP_STATUS_UNIT_REGISTERED, &unit->status); + unit->device = NULL; + zfcp_erp_unit_failed(unit, 12, NULL); + zfcp_unit_put(unit); } static int zfcp_scsi_slave_configure(struct scsi_device *sdp) @@ -92,7 +88,7 @@ static int zfcp_scsi_queuecommand(struct scsi_cmnd *scpnt, ret = zfcp_fsf_send_fcp_command_task(adapter, unit, scpnt, 0, ZFCP_REQ_AUTO_CLEANUP); if (unlikely(ret == -EBUSY)) - zfcp_scsi_command_fail(scpnt, DID_NO_CONNECT); + return SCSI_MLQUEUE_DEVICE_BUSY; else if (unlikely(ret < 0)) return SCSI_MLQUEUE_HOST_BUSY; diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 9aa301c1ed07..94acbeed4e7c 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -175,8 +175,8 @@ static struct aac_driver_ident aac_drivers[] = { { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Boxster/PERC3DiB) */ { aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */ { aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */ - { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2120S (Crusader) */ - { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2120S (Crusader) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan) */ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */ { aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */ { aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */ @@ -427,8 +427,8 @@ static int aac_slave_configure(struct scsi_device *sdev) * Firmware has an individual device recovery time typically * of 35 seconds, give us a margin. */ - if (sdev->timeout < (45 * HZ)) - sdev->timeout = 45 * HZ; + if (sdev->request_queue->rq_timeout < (45 * HZ)) + blk_queue_rq_timeout(sdev->request_queue, 45*HZ); for (cid = 0; cid < aac->maximum_num_containers; ++cid) if (aac->fsa_dev[cid].valid) ++num_lsu; diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 218777bfc143..399fe559e4de 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -13872,8 +13872,10 @@ static int __devinit advansys_board_found(struct Scsi_Host *shost, advansys_wide_free_mem(boardp); free_irq(boardp->irq, shost); err_free_dma: +#ifdef CONFIG_ISA if (shost->dma_channel != NO_ISA_DMA) free_dma(shost->dma_channel); +#endif err_free_proc: kfree(boardp->prtbuf); err_unmap: @@ -13894,10 +13896,12 @@ static int advansys_release(struct Scsi_Host *shost) ASC_DBG(1, "begin\n"); scsi_remove_host(shost); free_irq(board->irq, shost); +#ifdef CONFIG_ISA if (shost->dma_channel != NO_ISA_DMA) { ASC_DBG(1, "free_dma()\n"); free_dma(shost->dma_channel); } +#endif if (ASC_NARROW_BOARD(board)) { dma_unmap_single(board->dev, board->dvc_var.asc_dvc_var.overrun_dma, diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c index 9aec4ca64e56..f7da7530875e 100644 --- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c +++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c @@ -107,6 +107,7 @@ static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h) struct request *req; int ret; +retry: req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO); if (!req) return SCSI_DH_RES_TEMP_UNAVAIL; @@ -121,7 +122,6 @@ static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h) memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE); req->sense_len = 0; -retry: ret = blk_execute_rq(req->q, NULL, req, 1); if (ret == -EIO) { if (req->sense_len > 0) { @@ -136,8 +136,10 @@ retry: h->path_state = HP_SW_PATH_ACTIVE; ret = SCSI_DH_OK; } - if (ret == SCSI_DH_IMM_RETRY) + if (ret == SCSI_DH_IMM_RETRY) { + blk_put_request(req); goto retry; + } if (ret == SCSI_DH_DEV_OFFLINED) { h->path_state = HP_SW_PATH_PASSIVE; ret = SCSI_DH_OK; @@ -200,6 +202,7 @@ static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h) struct request *req; int ret, retry; +retry: req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO); if (!req) return SCSI_DH_RES_TEMP_UNAVAIL; @@ -216,7 +219,6 @@ static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h) req->sense_len = 0; retry = h->retries; -retry: ret = blk_execute_rq(req->q, NULL, req, 1); if (ret == -EIO) { if (req->sense_len > 0) { @@ -231,8 +233,10 @@ retry: ret = SCSI_DH_OK; if (ret == SCSI_DH_RETRY) { - if (--retry) + if (--retry) { + blk_put_request(req); goto retry; + } ret = SCSI_DH_IO; } diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 8aba4fdfb522..6194ed5d02c4 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -2445,7 +2445,7 @@ static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd) hba_status = detailed_status >> 8; // calculate resid for sg - scsi_set_resid(cmd, scsi_bufflen(cmd) - readl(reply+5)); + scsi_set_resid(cmd, scsi_bufflen(cmd) - readl(reply+20)); pHba = (adpt_hba*) cmd->device->host->hostdata[0]; @@ -2456,7 +2456,7 @@ static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd) case I2O_SCSI_DSC_SUCCESS: cmd->result = (DID_OK << 16); // handle underflow - if(readl(reply+5) < cmd->underflow ) { + if (readl(reply+20) < cmd->underflow) { cmd->result = (DID_ERROR <<16); printk(KERN_WARNING"%s: SCSI CMD underflow\n",pHba->name); } diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index c387c15a2128..fb247fdfa2bd 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -588,7 +588,7 @@ static struct pci_driver gdth_pci_driver = { .remove = gdth_pci_remove_one, }; -static void gdth_pci_remove_one(struct pci_dev *pdev) +static void __devexit gdth_pci_remove_one(struct pci_dev *pdev) { gdth_ha_str *ha = pci_get_drvdata(pdev); @@ -600,7 +600,7 @@ static void gdth_pci_remove_one(struct pci_dev *pdev) pci_disable_device(pdev); } -static int gdth_pci_init_one(struct pci_dev *pdev, +static int __devinit gdth_pci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { ushort vendor = pdev->vendor; @@ -853,7 +853,7 @@ static int __init gdth_init_isa(ulong32 bios_adr,gdth_ha_str *ha) #endif /* CONFIG_ISA */ #ifdef CONFIG_PCI -static int gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr, +static int __devinit gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr, gdth_ha_str *ha) { register gdt6_dpram_str __iomem *dp6_ptr; @@ -1237,7 +1237,7 @@ static int gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr, /* controller protocol functions */ -static void __init gdth_enable_int(gdth_ha_str *ha) +static void __devinit gdth_enable_int(gdth_ha_str *ha) { ulong flags; gdt2_dpram_str __iomem *dp2_ptr; @@ -1553,7 +1553,7 @@ static int gdth_internal_cmd(gdth_ha_str *ha, unchar service, ushort opcode, /* search for devices */ -static int __init gdth_search_drives(gdth_ha_str *ha) +static int __devinit gdth_search_drives(gdth_ha_str *ha) { ushort cdev_cnt, i; int ok; @@ -4935,7 +4935,7 @@ static int __init gdth_eisa_probe_one(ushort eisa_slot) #endif /* CONFIG_EISA */ #ifdef CONFIG_PCI -static int gdth_pci_probe_one(gdth_pci_str *pcistr, +static int __devinit gdth_pci_probe_one(gdth_pci_str *pcistr, gdth_ha_str **ha_out) { struct Scsi_Host *shp; diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 87e09f35d3d4..6cad1758243a 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -1442,7 +1442,7 @@ static int ibmvscsi_slave_configure(struct scsi_device *sdev) spin_lock_irqsave(shost->host_lock, lock_flags); if (sdev->type == TYPE_DISK) { sdev->allow_restart = 1; - sdev->timeout = 60 * HZ; + blk_queue_rq_timeout(sdev->request_queue, 60 * HZ); } scsi_adjust_queue_depth(sdev, 0, shost->cmd_per_lun); spin_unlock_irqrestore(shost->host_lock, lock_flags); diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c index 2a5b29d12172..e2dd6a45924a 100644 --- a/drivers/scsi/ibmvscsi/ibmvstgt.c +++ b/drivers/scsi/ibmvscsi/ibmvstgt.c @@ -864,21 +864,23 @@ static int ibmvstgt_probe(struct vio_dev *dev, const struct vio_device_id *id) INIT_WORK(&vport->crq_work, handle_crq); - err = crq_queue_create(&vport->crq_queue, target); + err = scsi_add_host(shost, target->dev); if (err) goto free_srp_target; - err = scsi_add_host(shost, target->dev); + err = scsi_tgt_alloc_queue(shost); if (err) - goto destroy_queue; + goto remove_host; - err = scsi_tgt_alloc_queue(shost); + err = crq_queue_create(&vport->crq_queue, target); if (err) - goto destroy_queue; + goto free_queue; return 0; -destroy_queue: - crq_queue_destroy(target); +free_queue: + scsi_tgt_free_queue(shost); +remove_host: + scsi_remove_host(shost); free_srp_target: srp_target_free(target); put_host: diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 801c7cf54d2e..3fdee7370ccc 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -489,12 +489,6 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, if (!__kfifo_get(session->cmdpool.queue, (void*)&task, sizeof(void*))) return NULL; - - if ((hdr->opcode == (ISCSI_OP_NOOP_OUT | ISCSI_OP_IMMEDIATE)) && - hdr->ttt == RESERVED_ITT) { - conn->ping_task = task; - conn->last_ping = jiffies; - } } /* * released in complete pdu for task we expect a response for, and @@ -703,6 +697,11 @@ static void iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr) task = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)&hdr, NULL, 0); if (!task) iscsi_conn_printk(KERN_ERR, conn, "Could not send nopout\n"); + else if (!rhdr) { + /* only track our nops */ + conn->ping_task = task; + conn->last_ping = jiffies; + } } static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr, diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 28c9da7d4a5c..7dc62deb4087 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -4402,6 +4402,10 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) scb_t *scb; int rval; + scmd = scsi_allocate_command(GFP_KERNEL); + if (!scmd) + return -ENOMEM; + /* * The internal commands share one command id and hence are * serialized. This is so because we want to reserve maximum number of @@ -4412,12 +4416,11 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) scb = &adapter->int_scb; memset(scb, 0, sizeof(scb_t)); - scmd = &adapter->int_scmd; - memset(scmd, 0, sizeof(Scsi_Cmnd)); - sdev = kzalloc(sizeof(struct scsi_device), GFP_KERNEL); scmd->device = sdev; + memset(adapter->int_cdb, 0, sizeof(adapter->int_cdb)); + scmd->cmnd = adapter->int_cdb; scmd->device->host = adapter->host; scmd->host_scribble = (void *)scb; scmd->cmnd[0] = MEGA_INTERNAL_CMD; @@ -4456,6 +4459,8 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) mutex_unlock(&adapter->int_mtx); + scsi_free_command(GFP_KERNEL, scmd); + return rval; } diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h index ee70bd4ae4ba..795201fa0b48 100644 --- a/drivers/scsi/megaraid.h +++ b/drivers/scsi/megaraid.h @@ -888,8 +888,8 @@ typedef struct { u8 sglen; /* f/w supported scatter-gather list length */ + unsigned char int_cdb[MAX_COMMAND_SIZE]; scb_t int_scb; - Scsi_Cmnd int_scmd; struct mutex int_mtx; /* To synchronize the internal commands */ struct completion int_waitq; /* wait queue for internal diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index a454f94623d7..17ce7abe17ee 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -1016,7 +1016,8 @@ static int megasas_slave_configure(struct scsi_device *sdev) * The RAID firmware may require extended timeouts. */ if (sdev->channel >= MEGASAS_MAX_PD_CHANNELS) - sdev->timeout = MEGASAS_DEFAULT_CMD_TIMEOUT * HZ; + blk_queue_rq_timeout(sdev->request_queue, + MEGASAS_DEFAULT_CMD_TIMEOUT * HZ); return 0; } diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index f25f41a499e5..b97194096d8e 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2547,7 +2547,6 @@ typedef struct scsi_qla_host { uint8_t fcode_revision[16]; uint32_t fw_revision[4]; - uint16_t fdt_odd_index; uint32_t fdt_wrt_disable; uint32_t fdt_erase_cmd; uint32_t fdt_block_size; diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index a470f2d3270d..4218f20f5ed5 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -140,7 +140,6 @@ int qla2100_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; unsigned long flags; struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; @@ -151,10 +150,7 @@ qla2100_pci_config(scsi_qla_host_t *ha) w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR); pci_write_config_word(ha->pdev, PCI_COMMAND, w); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); /* Get PCI bus information. */ spin_lock_irqsave(&ha->hardware_lock, flags); @@ -174,7 +170,6 @@ int qla2300_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; unsigned long flags = 0; uint32_t cnt; struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; @@ -236,10 +231,7 @@ qla2300_pci_config(scsi_qla_host_t *ha) pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); /* Get PCI bus information. */ spin_lock_irqsave(&ha->hardware_lock, flags); @@ -259,7 +251,6 @@ int qla24xx_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; unsigned long flags = 0; struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; @@ -281,10 +272,7 @@ qla24xx_pci_config(scsi_qla_host_t *ha) if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP)) pcie_set_readrq(ha->pdev, 2048); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); ha->chip_revision = ha->pdev->revision; @@ -306,7 +294,6 @@ int qla25xx_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; pci_set_master(ha->pdev); pci_try_set_mwi(ha->pdev); @@ -320,10 +307,7 @@ qla25xx_pci_config(scsi_qla_host_t *ha) if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP)) pcie_set_readrq(ha->pdev, 2048); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); ha->chip_revision = ha->pdev->revision; @@ -980,7 +964,6 @@ qla2x00_setup_chip(scsi_qla_host_t *ha) &ha->fw_minor_version, &ha->fw_subminor_version, &ha->fw_attributes, &ha->fw_memory_size); - qla2x00_resize_request_q(ha); ha->flags.npiv_supported = 0; if ((IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA84XX(ha)) && @@ -992,6 +975,7 @@ qla2x00_setup_chip(scsi_qla_host_t *ha) ha->max_npiv_vports = MIN_MULTI_ID_FABRIC - 1; } + qla2x00_resize_request_q(ha); if (ql2xallocfwdump) qla2x00_alloc_fw_dump(ha); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 36bc6851e23d..3402746ec128 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -1964,7 +1964,7 @@ qla2x00_get_resource_cnts(scsi_qla_host_t *ha, uint16_t *cur_xchg_cnt, *cur_iocb_cnt = mcp->mb[7]; if (orig_iocb_cnt) *orig_iocb_cnt = mcp->mb[10]; - if (max_npiv_vports) + if (ha->flags.npiv_supported && max_npiv_vports) *max_npiv_vports = mcp->mb[11]; } diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 21dd182ad512..35567203ef61 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -728,6 +728,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) if (ha->isp_ops->abort_command(ha, sp)) { DEBUG2(printk("%s(%ld): abort_command " "mbx failed.\n", __func__, ha->host_no)); + ret = FAILED; } else { DEBUG3(printk("%s(%ld): abort_command " "mbx success.\n", __func__, ha->host_no)); diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 90a13211717f..e4af678eb2d6 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -722,6 +722,7 @@ done: static void qla2xxx_get_fdt_info(scsi_qla_host_t *ha) { +#define FLASH_BLK_SIZE_4K 0x1000 #define FLASH_BLK_SIZE_32K 0x8000 #define FLASH_BLK_SIZE_64K 0x10000 const char *loc, *locations[] = { "MID", "FDT" }; @@ -755,7 +756,6 @@ qla2xxx_get_fdt_info(scsi_qla_host_t *ha) loc = locations[1]; mid = le16_to_cpu(fdt->man_id); fid = le16_to_cpu(fdt->id); - ha->fdt_odd_index = mid == 0x1f; ha->fdt_wrt_disable = fdt->wrt_disable_bits; ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0300 | fdt->erase_cmd); ha->fdt_block_size = le32_to_cpu(fdt->block_size); @@ -788,8 +788,7 @@ no_flash_data: ha->fdt_block_size = FLASH_BLK_SIZE_64K; break; case 0x1f: /* Atmel 26DF081A. */ - ha->fdt_odd_index = 1; - ha->fdt_block_size = FLASH_BLK_SIZE_64K; + ha->fdt_block_size = FLASH_BLK_SIZE_4K; ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0320); ha->fdt_unprotect_sec_cmd = flash_conf_to_access_addr(0x0339); ha->fdt_protect_sec_cmd = flash_conf_to_access_addr(0x0336); @@ -801,9 +800,9 @@ no_flash_data: } done: DEBUG2(qla_printk(KERN_DEBUG, ha, "FDT[%s]: (0x%x/0x%x) erase=0x%x " - "pro=%x upro=%x idx=%d wrtd=0x%x blk=0x%x.\n", loc, mid, fid, + "pro=%x upro=%x wrtd=0x%x blk=0x%x.\n", loc, mid, fid, ha->fdt_erase_cmd, ha->fdt_protect_sec_cmd, - ha->fdt_unprotect_sec_cmd, ha->fdt_odd_index, ha->fdt_wrt_disable, + ha->fdt_unprotect_sec_cmd, ha->fdt_wrt_disable, ha->fdt_block_size)); } @@ -987,13 +986,9 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr, qla24xx_unprotect_flash(ha); for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) { - if (ha->fdt_odd_index) { - findex = faddr << 2; - fdata = findex & sec_mask; - } else { - findex = faddr; - fdata = (findex & sec_mask) << 2; - } + + findex = faddr; + fdata = (findex & sec_mask) << 2; /* Are we at the beginning of a sector? */ if ((findex & rest_addr) == 0) { diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index be5e299df528..eea6720adf16 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.02.01-k8" +#define QLA2XXX_VERSION "8.02.01-k9" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 2 diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 94ed262bdf0c..edfaf241c5ba 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -932,8 +932,7 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) int i, rtn = NEEDS_RETRY; for (i = 0; rtn == NEEDS_RETRY && i < 2; i++) - rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, - scmd->device->timeout, 0); + rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, scmd->device->request_queue->rq_timeout, 0); if (rtn == SUCCESS) return 0; @@ -1340,9 +1339,10 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) * LLD/transport was disrupted during processing of the IO. * The transport class is now blocked/blocking, * and the transport will decide what to do with the IO - * based on its timers and recovery capablilities. + * based on its timers and recovery capablilities if + * there are enough retries. */ - return ADD_TO_MLQUEUE; + goto maybe_retry; case DID_TRANSPORT_FAILFAST: /* * The transport decided to failfast the IO (most likely diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index f5d3b96890dc..148d3af92aef 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -567,15 +567,18 @@ static inline int scsi_host_is_busy(struct Scsi_Host *shost) */ static void scsi_run_queue(struct request_queue *q) { - struct scsi_device *starved_head = NULL, *sdev = q->queuedata; + struct scsi_device *sdev = q->queuedata; struct Scsi_Host *shost = sdev->host; + LIST_HEAD(starved_list); unsigned long flags; if (scsi_target(sdev)->single_lun) scsi_single_lun_run(sdev); spin_lock_irqsave(shost->host_lock, flags); - while (!list_empty(&shost->starved_list) && !scsi_host_is_busy(shost)) { + list_splice_init(&shost->starved_list, &starved_list); + + while (!list_empty(&starved_list)) { int flagset; /* @@ -588,24 +591,18 @@ static void scsi_run_queue(struct request_queue *q) * scsi_request_fn must get the host_lock before checking * or modifying starved_list or starved_entry. */ - sdev = list_entry(shost->starved_list.next, - struct scsi_device, starved_entry); - /* - * The *queue_ready functions can add a device back onto the - * starved list's tail, so we must check for a infinite loop. - */ - if (sdev == starved_head) + if (scsi_host_is_busy(shost)) break; - if (!starved_head) - starved_head = sdev; + sdev = list_entry(starved_list.next, + struct scsi_device, starved_entry); + list_del_init(&sdev->starved_entry); if (scsi_target_is_busy(scsi_target(sdev))) { list_move_tail(&sdev->starved_entry, &shost->starved_list); continue; } - list_del_init(&sdev->starved_entry); spin_unlock(shost->host_lock); spin_lock(sdev->request_queue->queue_lock); @@ -621,6 +618,8 @@ static void scsi_run_queue(struct request_queue *q) spin_lock(shost->host_lock); } + /* put any unprocessed entries back */ + list_splice(&starved_list, &shost->starved_list); spin_unlock_irqrestore(shost->host_lock, flags); blk_run_queue(q); @@ -649,8 +648,8 @@ static void scsi_requeue_command(struct request_queue *q, struct scsi_cmnd *cmd) struct request *req = cmd->request; unsigned long flags; - scsi_unprep_request(req); spin_lock_irqsave(q->queue_lock, flags); + scsi_unprep_request(req); blk_requeue_request(q, req); spin_unlock_irqrestore(q->queue_lock, flags); diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index c9e1242eaf25..5081b3981d3c 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -757,7 +757,7 @@ static int sd_ioctl(struct block_device *bdev, fmode_t mode, * access to the device is prohibited. */ error = scsi_nonblockable_ioctl(sdp, cmd, p, - (mode & FMODE_NDELAY_NOW) != 0); + (mode & FMODE_NDELAY) != 0); if (!scsi_block_when_processing_errors(sdp) || !error) return error; diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 62b6633e3a97..45b66b98a516 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -521,7 +521,7 @@ static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd, * if it doesn't recognise the ioctl */ ret = scsi_nonblockable_ioctl(sdev, cmd, argp, - (mode & FMODE_NDELAY_NOW) != 0); + (mode & FMODE_NDELAY) != 0); if (ret != -ENODEV) return ret; return scsi_ioctl(sdev, cmd, argp); diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c index 3790906a77d1..2fa830c0be27 100644 --- a/drivers/scsi/stex.c +++ b/drivers/scsi/stex.c @@ -477,7 +477,7 @@ stex_slave_config(struct scsi_device *sdev) { sdev->use_10_for_rw = 1; sdev->use_10_for_ms = 1; - sdev->timeout = 60 * HZ; + blk_queue_rq_timeout(sdev->request_queue, 60 * HZ); sdev->tagged_supported = 1; return 0; diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index 6dd98f9fb89c..ae3699d77dd0 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -2149,7 +2149,7 @@ out4: return ret; } -static struct ioc3_submodule ioc3uart_submodule = { +static struct ioc3_submodule ioc3uart_ops = { .name = "IOC3uart", .probe = ioc3uart_probe, .remove = ioc3uart_remove, @@ -2173,7 +2173,7 @@ static int __devinit ioc3uart_init(void) __func__); return ret; } - ret = ioc3_register_submodule(&ioc3uart_submodule); + ret = ioc3_register_submodule(&ioc3uart_ops); if (ret) uart_unregister_driver(&ioc3_uart); return ret; @@ -2181,7 +2181,7 @@ static int __devinit ioc3uart_init(void) static void __devexit ioc3uart_exit(void) { - ioc3_unregister_submodule(&ioc3uart_submodule); + ioc3_unregister_submodule(&ioc3uart_ops); uart_unregister_driver(&ioc3_uart); } diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 6117d3db0b66..28c00c3d58f5 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -591,8 +591,8 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, /* Update the per-port timeout */ uart_update_timeout(port, new->c_cflag, baud); - /* Do our best to flush TX & RX, so we don't loose anything */ - /* But we don't wait indefinitly ! */ + /* Do our best to flush TX & RX, so we don't lose anything */ + /* But we don't wait indefinitely ! */ j = 5000000; /* Maximum wait */ /* FIXME Can't receive chars since set_termios might be called at early * boot for the console, all stuff is not yet ready to receive at that diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c index 317d239ab740..29cbb0afef8e 100644 --- a/drivers/serial/s3c2440.c +++ b/drivers/serial/s3c2440.c @@ -177,5 +177,5 @@ module_exit(s3c2440_serial_exit); MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPLi v2"); +MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:s3c2440-uart"); diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 5c0f32c7fbf6..165fc010978c 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -144,9 +144,9 @@ static void put_char(struct uart_port *port, char c) status = sci_in(port, SCxSR); } while (!(status & SCxSR_TDxE(port))); - sci_out(port, SCxTDR, c); sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + sci_out(port, SCxTDR, c); spin_unlock_irqrestore(&port->lock, flags); } @@ -478,10 +478,10 @@ static void sci_transmit_chars(struct uart_port *port) return; } - if (port->type == PORT_SCIF) - count = scif_txroom(port); - else + if (port->type == PORT_SCI) count = sci_txroom(port); + else + count = scif_txroom(port); do { unsigned char c; @@ -510,7 +510,7 @@ static void sci_transmit_chars(struct uart_port *port) } else { ctrl = sci_in(port, SCSCR); - if (port->type == PORT_SCIF) { + if (port->type != PORT_SCI) { sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); } @@ -536,10 +536,10 @@ static inline void sci_receive_chars(struct uart_port *port) return; while (1) { - if (port->type == PORT_SCIF) - count = scif_rxroom(port); - else + if (port->type == PORT_SCI) count = sci_rxroom(port); + else + count = scif_rxroom(port); /* Don't copy more bytes than there is room for in the buffer */ count = tty_buffer_request_room(tty, count); @@ -714,7 +714,7 @@ static inline int sci_handle_breaks(struct uart_port *port) #if defined(SCIF_ORER) /* XXX: Handle SCIF overrun error */ - if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) { + if (port->type != PORT_SCI && (sci_in(port, SCLSR) & SCIF_ORER) != 0) { sci_out(port, SCLSR, 0); if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) { copied++; @@ -1042,7 +1042,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ - if (port->type == PORT_SCIF) + if (port->type != PORT_SCI) sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); smr_val = sci_in(port, SCSMR) & 3; @@ -1085,6 +1085,7 @@ static const char *sci_type(struct uart_port *port) case PORT_SCI: return "sci"; case PORT_SCIF: return "scif"; case PORT_IRDA: return "irda"; + case PORT_SCIFA: return "scifa"; } return NULL; @@ -1112,6 +1113,7 @@ static void sci_config_port(struct uart_port *port, int flags) s->init_pins = sci_init_pins_sci; break; case PORT_SCIF: + case PORT_SCIFA: s->init_pins = sci_init_pins_scif; break; case PORT_IRDA: diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 6163a45f968f..9f33b064172e 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -289,18 +289,18 @@ #define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\ static inline unsigned int sci_##name##_in(struct uart_port *port) \ { \ - if (port->type == PORT_SCI) { \ - SCI_IN(sci_size, sci_offset) \ - } else { \ - SCI_IN(scif_size, scif_offset); \ + if (port->type == PORT_SCIF) { \ + SCI_IN(scif_size, scif_offset) \ + } else { /* PORT_SCI or PORT_SCIFA */ \ + SCI_IN(sci_size, sci_offset); \ } \ } \ static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ { \ - if (port->type == PORT_SCI) { \ - SCI_OUT(sci_size, sci_offset, value) \ - } else { \ - SCI_OUT(scif_size, scif_offset, value); \ + if (port->type == PORT_SCIF) { \ + SCI_OUT(scif_size, scif_offset, value) \ + } else { /* PORT_SCI or PORT_SCIFA */ \ + SCI_OUT(sci_size, sci_offset, value); \ } \ } diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c index 6a3f8fb0c9dd..3317148a4b93 100644 --- a/drivers/serial/uartlite.c +++ b/drivers/serial/uartlite.c @@ -286,8 +286,8 @@ static void ulite_release_port(struct uart_port *port) static int ulite_request_port(struct uart_port *port) { - pr_debug("ulite console: port=%p; port->mapbase=%x\n", - port, port->mapbase); + pr_debug("ulite console: port=%p; port->mapbase=%llx\n", + port, (unsigned long long) port->mapbase); if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) { dev_err(port->dev, "Memory region busy\n"); diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c index d1812d32f47d..63f0de29aa14 100644 --- a/drivers/sh/maple/maple.c +++ b/drivers/sh/maple/maple.c @@ -827,7 +827,7 @@ static int __init maple_bus_init(void) maple_queue_cache = kmem_cache_create("maple_queue_cache", 0x400, 0, - SLAB_POISON|SLAB_HWCACHE_ALIGN, NULL); + SLAB_HWCACHE_ALIGN, NULL); if (!maple_queue_cache) goto cleanup_bothirqs; diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index 02f9320f3efc..8abae4ad0fa5 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -766,6 +766,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev) /* Initialize the hardware */ clk_enable(clk); spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS)); spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); spi_writel(as, CR, SPI_BIT(SPIEN)); @@ -782,6 +783,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev) out_reset_hw: spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ clk_disable(clk); free_irq(irq, master); out_unmap_regs: @@ -805,6 +807,7 @@ static int __exit atmel_spi_remove(struct platform_device *pdev) spin_lock_irq(&as->lock); as->stopping = 1; spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ spi_readl(as, SR); spin_unlock_irq(&as->lock); diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c index 87b73e0169c5..b02f25c702fd 100644 --- a/drivers/spi/au1550_spi.c +++ b/drivers/spi/au1550_spi.c @@ -369,10 +369,23 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t) dma_rx_addr = t->rx_dma; /* - * check if buffers are already dma mapped, map them otherwise + * check if buffers are already dma mapped, map them otherwise: + * - first map the TX buffer, so cache data gets written to memory + * - then map the RX buffer, so that cache entries (with + * soon-to-be-stale data) get removed * use rx buffer in place of tx if tx buffer was not provided * use temp rx buffer (preallocated or realloc to fit) for rx dma */ + if (t->tx_buf) { + if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ + dma_tx_addr = dma_map_single(hw->dev, + (void *)t->tx_buf, + t->len, DMA_TO_DEVICE); + if (dma_mapping_error(hw->dev, dma_tx_addr)) + dev_err(hw->dev, "tx dma map error\n"); + } + } + if (t->rx_buf) { if (t->rx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ dma_rx_addr = dma_map_single(hw->dev, @@ -396,15 +409,8 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t) dma_sync_single_for_device(hw->dev, dma_rx_addr, t->len, DMA_FROM_DEVICE); } - if (t->tx_buf) { - if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ - dma_tx_addr = dma_map_single(hw->dev, - (void *)t->tx_buf, - t->len, DMA_TO_DEVICE); - if (dma_mapping_error(hw->dev, dma_tx_addr)) - dev_err(hw->dev, "tx dma map error\n"); - } - } else { + + if (!t->tx_buf) { dma_sync_single_for_device(hw->dev, dma_rx_addr, t->len, DMA_BIDIRECTIONAL); hw->tx = hw->rx; diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c index 0debe11b67b4..3b97803e1d11 100644 --- a/drivers/spi/mpc52xx_psc_spi.c +++ b/drivers/spi/mpc52xx_psc_spi.c @@ -142,6 +142,7 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi, unsigned rfalarm; unsigned send_at_once = MPC52xx_PSC_BUFSIZE; unsigned recv_at_once; + int last_block = 0; if (!t->tx_buf && !t->rx_buf && t->len) return -EINVAL; @@ -151,15 +152,17 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi, while (rb < t->len) { if (t->len - rb > MPC52xx_PSC_BUFSIZE) { rfalarm = MPC52xx_PSC_RFALARM; + last_block = 0; } else { send_at_once = t->len - sb; rfalarm = MPC52xx_PSC_BUFSIZE - (t->len - rb); + last_block = 1; } dev_dbg(&spi->dev, "send %d bytes...\n", send_at_once); for (; send_at_once; sb++, send_at_once--) { /* set EOF flag before the last word is sent */ - if (send_at_once == 1) + if (send_at_once == 1 && last_block) out_8(&psc->ircr2, 0x01); if (tx_buf) diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index dae87b1a4c6e..cf12f2d84be2 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -352,21 +352,21 @@ static int map_dma_buffers(struct driver_data *drv_data) } else drv_data->tx_map_len = drv_data->len; - /* Stream map the rx buffer */ - drv_data->rx_dma = dma_map_single(dev, drv_data->rx, - drv_data->rx_map_len, - DMA_FROM_DEVICE); - if (dma_mapping_error(dev, drv_data->rx_dma)) - return 0; - - /* Stream map the tx buffer */ + /* Stream map the tx buffer. Always do DMA_TO_DEVICE first + * so we flush the cache *before* invalidating it, in case + * the tx and rx buffers overlap. + */ drv_data->tx_dma = dma_map_single(dev, drv_data->tx, - drv_data->tx_map_len, - DMA_TO_DEVICE); + drv_data->tx_map_len, DMA_TO_DEVICE); + if (dma_mapping_error(dev, drv_data->tx_dma)) + return 0; - if (dma_mapping_error(dev, drv_data->tx_dma)) { - dma_unmap_single(dev, drv_data->rx_dma, + /* Stream map the rx buffer */ + drv_data->rx_dma = dma_map_single(dev, drv_data->rx, drv_data->rx_map_len, DMA_FROM_DEVICE); + if (dma_mapping_error(dev, drv_data->rx_dma)) { + dma_unmap_single(dev, drv_data->tx_dma, + drv_data->tx_map_len, DMA_TO_DEVICE); return 0; } diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c index 61ba147e384d..269a55ec52ef 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi_imx.c @@ -506,20 +506,6 @@ static int map_dma_buffers(struct driver_data *drv_data) if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx)) return -1; - /* NULL rx means write-only transfer and no map needed - since rx DMA will not be used */ - if (drv_data->rx) { - buf = drv_data->rx; - drv_data->rx_dma = dma_map_single( - dev, - buf, - drv_data->len, - DMA_FROM_DEVICE); - if (dma_mapping_error(dev, drv_data->rx_dma)) - return -1; - drv_data->rx_dma_needs_unmap = 1; - } - if (drv_data->tx == NULL) { /* Read only message --> use drv_data->dummy_dma_buf for dummy writes to achive reads */ @@ -533,18 +519,31 @@ static int map_dma_buffers(struct driver_data *drv_data) buf, drv_data->tx_map_len, DMA_TO_DEVICE); - if (dma_mapping_error(dev, drv_data->tx_dma)) { - if (drv_data->rx_dma) { - dma_unmap_single(dev, - drv_data->rx_dma, - drv_data->len, - DMA_FROM_DEVICE); - drv_data->rx_dma_needs_unmap = 0; - } + if (dma_mapping_error(dev, drv_data->tx_dma)) return -1; - } drv_data->tx_dma_needs_unmap = 1; + /* NULL rx means write-only transfer and no map needed + * since rx DMA will not be used */ + if (drv_data->rx) { + buf = drv_data->rx; + drv_data->rx_dma = dma_map_single(dev, + buf, + drv_data->len, + DMA_FROM_DEVICE); + if (dma_mapping_error(dev, drv_data->rx_dma)) { + if (drv_data->tx_dma) { + dma_unmap_single(dev, + drv_data->tx_dma, + drv_data->tx_map_len, + DMA_TO_DEVICE); + drv_data->tx_dma_needs_unmap = 0; + } + return -1; + } + drv_data->rx_dma_needs_unmap = 1; + } + return 0; } @@ -1457,7 +1456,7 @@ static int __init spi_imx_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct spi_imx_master *platform_info; struct spi_master *master; - struct driver_data *drv_data = NULL; + struct driver_data *drv_data; struct resource *res; int irq, status = 0; @@ -1468,14 +1467,6 @@ static int __init spi_imx_probe(struct platform_device *pdev) goto err_no_pdata; } - drv_data->clk = clk_get(&pdev->dev, "perclk2"); - if (IS_ERR(drv_data->clk)) { - dev_err(&pdev->dev, "probe - cannot get get\n"); - status = PTR_ERR(drv_data->clk); - goto err_no_clk; - } - clk_enable(drv_data->clk); - /* Allocate master with space for drv_data */ master = spi_alloc_master(dev, sizeof(struct driver_data)); if (!master) { @@ -1496,6 +1487,14 @@ static int __init spi_imx_probe(struct platform_device *pdev) drv_data->dummy_dma_buf = SPI_DUMMY_u32; + drv_data->clk = clk_get(&pdev->dev, "perclk2"); + if (IS_ERR(drv_data->clk)) { + dev_err(&pdev->dev, "probe - cannot get clock\n"); + status = PTR_ERR(drv_data->clk); + goto err_no_clk; + } + clk_enable(drv_data->clk); + /* Find and map resources */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -1631,12 +1630,13 @@ err_no_iomap: kfree(drv_data->ioarea); err_no_iores: - spi_master_put(master); - -err_no_pdata: clk_disable(drv_data->clk); clk_put(drv_data->clk); + err_no_clk: + spi_master_put(master); + +err_no_pdata: err_no_mem: return status; } diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c index cc1f647f579b..f2447a5476bb 100644 --- a/drivers/spi/spi_s3c24xx_gpio.c +++ b/drivers/spi/spi_s3c24xx_gpio.c @@ -34,7 +34,7 @@ struct s3c2410_spigpio { static inline struct s3c2410_spigpio *spidev_to_sg(struct spi_device *spi) { - return spi->controller_data; + return spi_master_get_devdata(spi->master); } static inline void setsck(struct spi_device *dev, int on) @@ -118,6 +118,7 @@ static int s3c2410_spigpio_probe(struct platform_device *dev) /* setup spi bitbang adaptor */ sp->bitbang.master = spi_master_get(master); sp->bitbang.master->bus_num = info->bus_num; + sp->bitbang.master->num_chipselect = info->num_chipselect; sp->bitbang.chipselect = s3c2410_spigpio_chipselect; sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0; diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 89a43755a453..5d869c4d3eb2 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -597,7 +597,9 @@ static int spidev_probe(struct spi_device *spi) } mutex_unlock(&device_list_lock); - if (status != 0) + if (status == 0) + spi_set_drvdata(spi, spidev); + else kfree(spidev); return status; diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig index 307b1f62d949..b1b947edcf01 100644 --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig @@ -1,10 +1,11 @@ -menu "Sonics Silicon Backplane" - config SSB_POSSIBLE bool depends on HAS_IOMEM && HAS_DMA default y +menu "Sonics Silicon Backplane" + depends on SSB_POSSIBLE + config SSB tristate "Sonics Silicon Backplane support" depends on SSB_POSSIBLE diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index c95b286a1239..5d457c96bd7e 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -22,6 +22,8 @@ menuconfig STAGING If in doubt, say N here. +if STAGING + config STAGING_EXCLUDE_BUILD bool "Exclude Staging drivers from being built" if STAGING default y @@ -62,3 +64,4 @@ source "drivers/staging/at76_usb/Kconfig" source "drivers/staging/poch/Kconfig" endif # !STAGING_EXCLUDE_BUILD +endif # STAGING diff --git a/drivers/telephony/phonedev.c b/drivers/telephony/phonedev.c index 37caf4d69037..b52cc830c0b4 100644 --- a/drivers/telephony/phonedev.c +++ b/drivers/telephony/phonedev.c @@ -8,7 +8,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * - * Author: Alan Cox, <alan@redhat.com> + * Author: Alan Cox, <alan@lxorguk.ukuu.org.uk> * * Fixes: Mar 01 2000 Thomas Sparr, <thomas.l.sparr@telia.com> * phone_register_device now works with unit!=PHONE_UNIT_ANY diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 20104443081a..d50a99f70aee 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -158,16 +158,12 @@ static int acm_wb_is_avail(struct acm *acm) } /* - * Finish write. + * Finish write. Caller must hold acm->write_lock */ static void acm_write_done(struct acm *acm, struct acm_wb *wb) { - unsigned long flags; - - spin_lock_irqsave(&acm->write_lock, flags); wb->use = 0; acm->transmitting--; - spin_unlock_irqrestore(&acm->write_lock, flags); } /* @@ -482,6 +478,7 @@ static void acm_write_bulk(struct urb *urb) { struct acm_wb *wb = urb->context; struct acm *acm = wb->instance; + unsigned long flags; if (verbose || urb->status || (urb->actual_length != urb->transfer_buffer_length)) @@ -490,7 +487,9 @@ static void acm_write_bulk(struct urb *urb) urb->transfer_buffer_length, urb->status); + spin_lock_irqsave(&acm->write_lock, flags); acm_write_done(acm, wb); + spin_unlock_irqrestore(&acm->write_lock, flags); if (ACM_READY(acm)) schedule_work(&acm->work); else diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 8e74657f106c..43a863c5cc43 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -51,6 +51,7 @@ static struct usb_device_id usbtmc_devices[] = { { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), }, { 0, } /* terminating entry */ }; +MODULE_DEVICE_TABLE(usb, usbtmc_devices); /* * This structure is the capabilities for the device diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 3d7793d93031..8c081308b0e2 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -279,7 +279,9 @@ static int usb_unbind_interface(struct device *dev) * altsetting means creating new endpoint device entries). * When either of these happens, defer the Set-Interface. */ - if (!error && intf->dev.power.status == DPM_ON) + if (intf->cur_altsetting->desc.bAlternateSetting == 0) + ; /* Already in altsetting 0 so skip Set-Interface */ + else if (!error && intf->dev.power.status == DPM_ON) usb_set_interface(udev, intf->altsetting[0]. desc.bInterfaceNumber, 0); else diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 887738577b28..6d1048faf08e 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1091,6 +1091,7 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) continue; dev_dbg(&dev->dev, "unregistering interface %s\n", dev_name(&interface->dev)); + interface->unregistering = 1; usb_remove_sysfs_intf_files(interface); device_del(&interface->dev); } diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index f66fba11fbd5..4fb65fdc9dc3 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -840,7 +840,7 @@ int usb_create_sysfs_intf_files(struct usb_interface *intf) struct usb_host_interface *alt = intf->cur_altsetting; int retval; - if (intf->sysfs_files_created) + if (intf->sysfs_files_created || intf->unregistering) return 0; /* The interface string may be present in some altsettings diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 4342bd9c3bb6..1f68af9db3f7 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -85,8 +85,8 @@ EXPORT_SYMBOL_GPL(usb_alloc_urb); * Must be called when a user of a urb is finished with it. When the last user * of the urb calls this function, the memory of the urb is freed. * - * Note: The transfer buffer associated with the urb is not freed, that must be - * done elsewhere. + * Note: The transfer buffer associated with the urb is not freed unless the + * URB_FREE_BUFFER transfer flag is set. */ void usb_free_urb(struct urb *urb) { diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c index 5ee1590b8e9c..c1d34df0b157 100644 --- a/drivers/usb/gadget/f_acm.c +++ b/drivers/usb/gadget/f_acm.c @@ -463,7 +463,11 @@ static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value, notify->wLength = cpu_to_le16(length); memcpy(buf, data, length); + /* ep_queue() can complete immediately if it fills the fifo... */ + spin_unlock(&acm->lock); status = usb_ep_queue(ep, req, GFP_ATOMIC); + spin_lock(&acm->lock); + if (status < 0) { ERROR(acm->port.func.config->cdev, "acm ttyGS%d can't notify serial state, %d\n", diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index 659b3d9671c4..3a8bb53fc473 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -172,7 +172,6 @@ static struct usb_interface_descriptor rndis_data_intf __initdata = { .bDescriptorType = USB_DT_INTERFACE, /* .bInterfaceNumber = DYNAMIC */ - .bAlternateSetting = 1, .bNumEndpoints = 2, .bInterfaceClass = USB_CLASS_CDC_DATA, .bInterfaceSubClass = 0, @@ -303,7 +302,7 @@ static void rndis_response_available(void *_rndis) __le32 *data = req->buf; int status; - if (atomic_inc_return(&rndis->notify_count)) + if (atomic_inc_return(&rndis->notify_count) != 1) return; /* Send RNDIS RESPONSE_AVAILABLE notification; a @@ -652,6 +651,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) fs_in_desc.bEndpointAddress; hs_out_desc.bEndpointAddress = fs_out_desc.bEndpointAddress; + hs_notify_desc.bEndpointAddress = + fs_notify_desc.bEndpointAddress; /* copy descriptors, and track endpoint copies */ f->hs_descriptors = usb_copy_descriptors(eth_hs_function); @@ -663,6 +664,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) f->hs_descriptors, &hs_in_desc); rndis->hs.out = usb_find_endpoint(eth_hs_function, f->hs_descriptors, &hs_out_desc); + rndis->hs.notify = usb_find_endpoint(eth_hs_function, + f->hs_descriptors, &hs_notify_desc); } rndis->port.open = rndis_open; diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 1fe8b44787b3..b3408ff39fba 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -2363,6 +2363,9 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) nuke(loop_ep, -ESHUTDOWN); spin_unlock_irqrestore(&udc_controller->lock, flags); + /* report disconnect; the controller is already quiesced */ + driver->disconnect(&udc_controller->gadget); + /* unbind gadget and unhook driver. */ driver->unbind(&udc_controller->gadget); udc_controller->gadget.dev.driver = NULL; diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index 091bb55c9aa7..f3c6703cffda 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -1836,6 +1836,9 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) nuke(loop_ep, -ESHUTDOWN); spin_unlock_irqrestore(&udc_controller->lock, flags); + /* report disconnect; the controller is already quiesced */ + driver->disconnect(&udc_controller->gadget); + /* unbind gadget and unhook driver. */ driver->unbind(&udc_controller->gadget); udc_controller->gadget.dev.driver = NULL; diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index da6e93c201d2..2dbc0db0b46c 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -141,7 +141,11 @@ static int is_vbus_present(void) if (mach->gpio_vbus) { int value = gpio_get_value(mach->gpio_vbus); - return mach->gpio_vbus_inverted ? !value : value; + + if (mach->gpio_vbus_inverted) + return !value; + else + return !!value; } if (mach->udc_is_connected) return mach->udc_is_connected(); @@ -982,7 +986,7 @@ static int pxa25x_udc_vbus_session(struct usb_gadget *_gadget, int is_active) struct pxa25x_udc *udc; udc = container_of(_gadget, struct pxa25x_udc, gadget); - udc->vbus = (is_active != 0); + udc->vbus = is_active; DMSG("vbus %s\n", is_active ? "supplied" : "inactive"); pullup(udc); return 0; @@ -1399,12 +1403,8 @@ lubbock_vbus_irq(int irq, void *_dev) static irqreturn_t udc_vbus_irq(int irq, void *_dev) { struct pxa25x_udc *dev = _dev; - int vbus = gpio_get_value(dev->mach->gpio_vbus); - if (dev->mach->gpio_vbus_inverted) - vbus = !vbus; - - pxa25x_udc_vbus_session(&dev->gadget, vbus); + pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present()); return IRQ_HANDLED; } diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 56f592dc0b36..f3a75a929e0a 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -110,29 +110,18 @@ config USB_ISP116X_HCD config USB_ISP1760_HCD tristate "ISP 1760 HCD support" - depends on USB && EXPERIMENTAL + depends on USB && EXPERIMENTAL && (PCI || PPC_OF) ---help--- The ISP1760 chip is a USB 2.0 host controller. This driver does not support isochronous transfers or OTG. + This USB controller is usually attached to a non-DMA-Master + capable bus. NXP's eval kit brings this chip on PCI card + where the chip itself is behind a PLB to simulate such + a bus. To compile this driver as a module, choose M here: the - module will be called isp1760-hcd. - -config USB_ISP1760_PCI - bool "Support for the PCI bus" - depends on USB_ISP1760_HCD && PCI - ---help--- - Enables support for the device present on the PCI bus. - This should only be required if you happen to have the eval kit from - NXP and you are going to test it. - -config USB_ISP1760_OF - bool "Support for the OF platform bus" - depends on USB_ISP1760_HCD && PPC_OF - ---help--- - Enables support for the device present on the PowerPC - OpenFirmware platform bus. + module will be called isp1760. config USB_OHCI_HCD tristate "OHCI HCD support" diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 15a803b206b8..4725d15d096f 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -643,7 +643,7 @@ static int ehci_run (struct usb_hcd *hcd) static irqreturn_t ehci_irq (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); - u32 status, pcd_status = 0, cmd; + u32 status, masked_status, pcd_status = 0, cmd; int bh; spin_lock (&ehci->lock); @@ -656,14 +656,14 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) goto dead; } - status &= INTR_MASK; - if (!status) { /* irq sharing? */ + masked_status = status & INTR_MASK; + if (!masked_status) { /* irq sharing? */ spin_unlock(&ehci->lock); return IRQ_NONE; } /* clear (just) interrupts */ - ehci_writel(ehci, status, &ehci->regs->status); + ehci_writel(ehci, masked_status, &ehci->regs->status); cmd = ehci_readl(ehci, &ehci->regs->command); bh = 0; @@ -734,18 +734,17 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* PCI errors [4.15.2.4] */ if (unlikely ((status & STS_FATAL) != 0)) { + ehci_err(ehci, "fatal error\n"); dbg_cmd(ehci, "fatal", cmd); dbg_status(ehci, "fatal", status); - if (status & STS_HALT) { - ehci_err (ehci, "fatal error\n"); + ehci_halt(ehci); dead: - ehci_reset (ehci); - ehci_writel(ehci, 0, &ehci->regs->configured_flag); - /* generic layer kills/unlinks all urbs, then - * uses ehci_stop to clean up the rest - */ - bh = 1; - } + ehci_reset(ehci); + ehci_writel(ehci, 0, &ehci->regs->configured_flag); + /* generic layer kills/unlinks all urbs, then + * uses ehci_stop to clean up the rest + */ + bh = 1; } if (bh) diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index c46a58f9181d..36864f958444 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -66,6 +66,8 @@ static int ehci_pci_setup(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + struct pci_dev *p_smbus; + u8 rev; u32 temp; int retval; @@ -166,6 +168,28 @@ static int ehci_pci_setup(struct usb_hcd *hcd) pci_write_config_byte(pdev, 0x4b, tmp | 0x20); } break; + case PCI_VENDOR_ID_ATI: + /* SB600 and old version of SB700 have a bug in EHCI controller, + * which causes usb devices lose response in some cases. + */ + if ((pdev->device == 0x4386) || (pdev->device == 0x4396)) { + p_smbus = pci_get_device(PCI_VENDOR_ID_ATI, + PCI_DEVICE_ID_ATI_SBX00_SMBUS, + NULL); + if (!p_smbus) + break; + rev = p_smbus->revision; + if ((pdev->device == 0x4386) || (rev == 0x3a) + || (rev == 0x3b)) { + u8 tmp; + ehci_info(ehci, "applying AMD SB600/SB700 USB " + "freeze workaround\n"); + pci_read_config_byte(pdev, 0x53, &tmp); + pci_write_config_byte(pdev, 0x53, tmp | (1<<3)); + } + pci_dev_put(p_smbus); + } + break; } ehci_reset(ehci); diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c index 0eba894bcb01..9c9da35abc6c 100644 --- a/drivers/usb/host/ehci-ps3.c +++ b/drivers/usb/host/ehci-ps3.c @@ -205,6 +205,7 @@ static int ps3_ehci_remove(struct ps3_system_bus_device *dev) tmp = hcd->irq; + ehci_shutdown(hcd); usb_remove_hcd(hcd); ps3_system_bus_set_driver_data(dev, NULL); diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 4a0c5a78b2ed..a081ee65bde6 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -918,7 +918,7 @@ iso_stream_init ( */ stream->usecs = HS_USECS_ISO (maxp); bandwidth = stream->usecs * 8; - bandwidth /= 1 << (interval - 1); + bandwidth /= interval; } else { u32 addr; @@ -951,7 +951,7 @@ iso_stream_init ( } else stream->raw_mask = smask_out [hs_transfers - 1]; bandwidth = stream->usecs + stream->c_usecs; - bandwidth /= 1 << (interval + 2); + bandwidth /= interval << 3; /* stream->splits gets created from raw_mask later */ stream->address = cpu_to_hc32(ehci, addr); diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index b11798d17ae5..c7d4b5a06bdb 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -183,16 +183,14 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) * the async ring; just the I/O watchdog. Note that if a * SHRINK were pending, OFF would never be requested. */ - enum ehci_timer_action oldactions = ehci->actions; + if (timer_pending(&ehci->watchdog) + && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF)) + & ehci->actions)) + return; if (!test_and_set_bit (action, &ehci->actions)) { unsigned long t; - if (timer_pending(&ehci->watchdog) - && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF)) - & oldactions)) - return; - switch (action) { case TIMER_IO_WATCHDOG: t = EHCI_IO_JIFFIES; @@ -208,7 +206,7 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1; break; } - mod_timer(&ehci->watchdog, round_jiffies(t + jiffies)); + mod_timer(&ehci->watchdog, t + jiffies); } } diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index af849f596135..b87ca7cf4b37 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -14,16 +14,16 @@ #include "../core/hcd.h" #include "isp1760-hcd.h" -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF #include <linux/of.h> #include <linux/of_platform.h> #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI #include <linux/pci.h> #endif -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF static int of_isp1760_probe(struct of_device *dev, const struct of_device_id *match) { @@ -128,7 +128,7 @@ static struct of_platform_driver isp1760_of_driver = { }; #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI static u32 nxp_pci_io_base; static u32 iolength; static u32 pci_mem_phy0; @@ -288,28 +288,28 @@ static struct pci_driver isp1761_pci_driver = { static int __init isp1760_init(void) { - int ret = -ENODEV; + int ret; init_kmem_once(); -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF ret = of_register_platform_driver(&isp1760_of_driver); if (ret) { deinit_kmem_cache(); return ret; } #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI ret = pci_register_driver(&isp1761_pci_driver); if (ret) goto unreg_of; #endif return ret; -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI unreg_of: #endif -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF of_unregister_platform_driver(&isp1760_of_driver); #endif deinit_kmem_cache(); @@ -319,10 +319,10 @@ module_init(isp1760_init); static void __exit isp1760_exit(void) { -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF of_unregister_platform_driver(&isp1760_of_driver); #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI pci_unregister_driver(&isp1761_pci_driver); #endif deinit_kmem_cache(); diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c index 2089d8a46c4b..3c1a3b5f89f1 100644 --- a/drivers/usb/host/ohci-ps3.c +++ b/drivers/usb/host/ohci-ps3.c @@ -192,7 +192,7 @@ fail_start: return result; } -static int ps3_ohci_remove (struct ps3_system_bus_device *dev) +static int ps3_ohci_remove(struct ps3_system_bus_device *dev) { unsigned int tmp; struct usb_hcd *hcd = @@ -205,6 +205,7 @@ static int ps3_ohci_remove (struct ps3_system_bus_device *dev) tmp = hcd->irq; + ohci_shutdown(hcd); usb_remove_hcd(hcd); ps3_system_bus_set_driver_data(dev, NULL); diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index c18d8790c410..2376f24f3c83 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1763,11 +1763,12 @@ static void r8a66597_timer(unsigned long _r8a66597) { struct r8a66597 *r8a66597 = (struct r8a66597 *)_r8a66597; unsigned long flags; + int port; spin_lock_irqsave(&r8a66597->lock, flags); - r8a66597_root_hub_control(r8a66597, 0); - r8a66597_root_hub_control(r8a66597, 1); + for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) + r8a66597_root_hub_control(r8a66597, port); spin_unlock_irqrestore(&r8a66597->lock, flags); } diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 69c34a58e205..b4ec716de7da 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3270,6 +3270,7 @@ static struct usb_device_id sisusb_table [] = { { USB_DEVICE(0x0711, 0x0900) }, { USB_DEVICE(0x0711, 0x0901) }, { USB_DEVICE(0x0711, 0x0902) }, + { USB_DEVICE(0x0711, 0x0903) }, { USB_DEVICE(0x0711, 0x0918) }, { USB_DEVICE(0x182d, 0x021c) }, { USB_DEVICE(0x182d, 0x0269) }, diff --git a/drivers/usb/misc/vstusb.c b/drivers/usb/misc/vstusb.c index 8648470c81ca..63dff9ba73c5 100644 --- a/drivers/usb/misc/vstusb.c +++ b/drivers/usb/misc/vstusb.c @@ -620,7 +620,7 @@ static long vstusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) __func__); retval = -EFAULT; } else { - dev_dbg(&dev->dev, "%s: recv %d bytes from pipe %d\n", + dev_dbg(&dev->dev, "%s: recv %zd bytes from pipe %d\n", __func__, usb_data.count, usb_data.pipe); } diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index c9de3f027aab..e06810aef2df 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -687,7 +687,10 @@ static ssize_t mon_bin_read(struct file *file, char __user *buf, } if (rp->b_read >= sizeof(struct mon_bin_hdr)) { - step_len = min(nbytes, (size_t)ep->len_cap); + step_len = ep->len_cap; + step_len -= rp->b_read - sizeof(struct mon_bin_hdr); + if (step_len > nbytes) + step_len = nbytes; offset = rp->b_out + PKT_SIZE; offset += rp->b_read - sizeof(struct mon_bin_hdr); if (offset >= rp->b_size) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 4a35745b30be..5280dba9b1fb 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -114,8 +114,8 @@ -unsigned debug; -module_param(debug, uint, S_IRUGO | S_IWUSR); +unsigned musb_debug; +module_param(musb_debug, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug message level. Default = 0"); #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia" @@ -2248,7 +2248,7 @@ static int __init musb_init(void) "host" #endif ", debug=%d\n", - musb_driver_name, debug); + musb_driver_name, musb_debug); return platform_driver_probe(&musb_driver, musb_probe); } diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h index 4d2794441b15..9fc1db44c72c 100644 --- a/drivers/usb/musb/musb_debug.h +++ b/drivers/usb/musb/musb_debug.h @@ -48,11 +48,11 @@ __func__, __LINE__ , ## args); \ } } while (0) -extern unsigned debug; +extern unsigned musb_debug; static inline int _dbg_level(unsigned l) { - return debug >= l; + return musb_debug >= l; } #define DBG(level, fmt, args...) xprintk(level, KERN_DEBUG, fmt, ## args) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 3133990f04ec..cc64462d4c4e 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -378,6 +378,19 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) switch (qh->type) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + /* fifo policy for these lists, except that NAKing + * should rotate a qh to the end (for fairness). + */ + if (qh->mux == 1) { + head = qh->ring.prev; + list_del(&qh->ring); + kfree(qh); + qh = first_qh(head); + break; + } + case USB_ENDPOINT_XFER_ISOC: case USB_ENDPOINT_XFER_INT: /* this is where periodic bandwidth should be @@ -388,17 +401,6 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) kfree(qh); qh = NULL; break; - - case USB_ENDPOINT_XFER_CONTROL: - case USB_ENDPOINT_XFER_BULK: - /* fifo policy for these lists, except that NAKing - * should rotate a qh to the end (for fairness). - */ - head = qh->ring.prev; - list_del(&qh->ring); - kfree(qh); - qh = first_qh(head); - break; } } return qh; @@ -1507,10 +1509,29 @@ void musb_host_rx(struct musb *musb, u8 epnum) musb_writew(hw_ep->regs, MUSB_RXCSR, val); #ifdef CONFIG_USB_INVENTRA_DMA + if (usb_pipeisoc(pipe)) { + struct usb_iso_packet_descriptor *d; + + d = urb->iso_frame_desc + qh->iso_idx; + d->actual_length = xfer_len; + + /* even if there was an error, we did the dma + * for iso_frame_desc->length + */ + if (d->status != EILSEQ && d->status != -EOVERFLOW) + d->status = 0; + + if (++qh->iso_idx >= urb->number_of_packets) + done = true; + else + done = false; + + } else { /* done if urb buffer is full or short packet is recd */ done = (urb->actual_length + xfer_len >= urb->transfer_buffer_length || dma->actual_len < qh->maxpacket); + } /* send IN token for next packet, without AUTOREQ */ if (!done) { @@ -1547,7 +1568,8 @@ void musb_host_rx(struct musb *musb, u8 epnum) if (dma) { struct dma_controller *c; u16 rx_count; - int ret; + int ret, length; + dma_addr_t buf; rx_count = musb_readw(epio, MUSB_RXCOUNT); @@ -1560,6 +1582,35 @@ void musb_host_rx(struct musb *musb, u8 epnum) c = musb->dma_controller; + if (usb_pipeisoc(pipe)) { + int status = 0; + struct usb_iso_packet_descriptor *d; + + d = urb->iso_frame_desc + qh->iso_idx; + + if (iso_err) { + status = -EILSEQ; + urb->error_count++; + } + if (rx_count > d->length) { + if (status == 0) { + status = -EOVERFLOW; + urb->error_count++; + } + DBG(2, "** OVERFLOW %d into %d\n",\ + rx_count, d->length); + + length = d->length; + } else + length = rx_count; + d->status = status; + buf = urb->transfer_dma + d->offset; + } else { + length = rx_count; + buf = urb->transfer_dma + + urb->actual_length; + } + dma->desired_mode = 0; #ifdef USE_MODE1 /* because of the issue below, mode 1 will @@ -1571,6 +1622,12 @@ void musb_host_rx(struct musb *musb, u8 epnum) urb->actual_length) > qh->maxpacket) dma->desired_mode = 1; + if (rx_count < hw_ep->max_packet_sz_rx) { + length = rx_count; + dma->bDesiredMode = 0; + } else { + length = urb->transfer_buffer_length; + } #endif /* Disadvantage of using mode 1: @@ -1608,12 +1665,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) */ ret = c->channel_program( dma, qh->maxpacket, - dma->desired_mode, - urb->transfer_dma - + urb->actual_length, - (dma->desired_mode == 0) - ? rx_count - : urb->transfer_buffer_length); + dma->desired_mode, buf, length); if (!ret) { c->channel_release(dma); @@ -1631,19 +1683,6 @@ void musb_host_rx(struct musb *musb, u8 epnum) } } - if (dma && usb_pipeisoc(pipe)) { - struct usb_iso_packet_descriptor *d; - int iso_stat = status; - - d = urb->iso_frame_desc + qh->iso_idx; - d->actual_length += xfer_len; - if (iso_err) { - iso_stat = -EILSEQ; - urb->error_count++; - } - d->status = iso_stat; - } - finish: urb->actual_length += xfer_len; qh->offset += xfer_len; @@ -1671,22 +1710,9 @@ static int musb_schedule( struct list_head *head = NULL; /* use fixed hardware for control and bulk */ - switch (qh->type) { - case USB_ENDPOINT_XFER_CONTROL: + if (qh->type == USB_ENDPOINT_XFER_CONTROL) { head = &musb->control; hw_ep = musb->control_ep; - break; - case USB_ENDPOINT_XFER_BULK: - hw_ep = musb->bulk_ep; - if (is_in) - head = &musb->in_bulk; - else - head = &musb->out_bulk; - break; - } - if (head) { - idle = list_empty(head); - list_add_tail(&qh->ring, head); goto success; } @@ -1725,19 +1751,34 @@ static int musb_schedule( else diff = hw_ep->max_packet_sz_tx - qh->maxpacket; - if (diff > 0 && best_diff > diff) { + if (diff >= 0 && best_diff > diff) { best_diff = diff; best_end = epnum; } } - if (best_end < 0) + /* use bulk reserved ep1 if no other ep is free */ + if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) { + hw_ep = musb->bulk_ep; + if (is_in) + head = &musb->in_bulk; + else + head = &musb->out_bulk; + goto success; + } else if (best_end < 0) { return -ENOSPC; + } idle = 1; + qh->mux = 0; hw_ep = musb->endpoints + best_end; musb->periodic[best_end] = qh; DBG(4, "qh %p periodic slot %d\n", qh, best_end); success: + if (head) { + idle = list_empty(head); + list_add_tail(&qh->ring, head); + qh->mux = 1; + } qh->hw_ep = hw_ep; qh->hep->hcpriv = qh; if (idle) @@ -2015,11 +2056,13 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) sched = &musb->control; break; case USB_ENDPOINT_XFER_BULK: - if (usb_pipein(urb->pipe)) - sched = &musb->in_bulk; - else - sched = &musb->out_bulk; - break; + if (qh->mux == 1) { + if (usb_pipein(urb->pipe)) + sched = &musb->in_bulk; + else + sched = &musb->out_bulk; + break; + } default: /* REVISIT when we get a schedule tree, periodic * transfers won't always be at the head of a @@ -2067,11 +2110,13 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) sched = &musb->control; break; case USB_ENDPOINT_XFER_BULK: - if (is_in) - sched = &musb->in_bulk; - else - sched = &musb->out_bulk; - break; + if (qh->mux == 1) { + if (is_in) + sched = &musb->in_bulk; + else + sched = &musb->out_bulk; + break; + } default: /* REVISIT when we get a schedule tree, periodic transfers * won't always be at the head of a singleton queue... diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h index 77bcdb9d5b32..0b7fbcd21963 100644 --- a/drivers/usb/musb/musb_host.h +++ b/drivers/usb/musb/musb_host.h @@ -53,6 +53,7 @@ struct musb_qh { struct list_head ring; /* of musb_qh */ /* struct musb_qh *next; */ /* for periodic tree */ + u8 mux; /* qh multiplexed to hw_ep */ unsigned offset; /* in urb->transfer_buffer */ unsigned segsize; /* current xfer fragment */ diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 9d2dcb121c5e..ce6c162920f7 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -53,7 +53,9 @@ static void musb_do_idle(unsigned long _musb) { struct musb *musb = (void *)_musb; unsigned long flags; +#ifdef CONFIG_USB_MUSB_HDRC_HCD u8 power; +#endif u8 devctl; devctl = musb_readb(musb->mregs, MUSB_DEVCTL); diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index b73b036f3d77..ee8fca92a4ac 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -605,7 +605,7 @@ void musb_platform_set_mode(struct musb *musb, u8 musb_mode) if (musb->board_mode != MUSB_OTG) { ERR("Changing mode currently only supported in OTG mode\n"); - return; + return -EINVAL; } otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT); diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 5b20de130e08..5b95009d2fbb 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -135,6 +135,7 @@ static int usb_console_setup(struct console *co, char *options) err("no more memory"); goto reset_open_count; } + kref_init(&tty->kref); termios = kzalloc(sizeof(*termios), GFP_KERNEL); if (!termios) { retval = -ENOMEM; diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 8008d0bc80ad..cfaf1f085535 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -56,6 +56,7 @@ static void cp2101_shutdown(struct usb_serial *); static int debug; static struct usb_device_id id_table [] = { + { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */ { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */ { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */ @@ -67,6 +68,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */ { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */ { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */ + { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */ { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */ { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */ { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ @@ -85,6 +87,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ + { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 51d7bdea2869..fb6f2933b01b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -143,6 +143,7 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) }, @@ -166,6 +167,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) }, { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) }, { USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) }, { USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) }, @@ -1498,7 +1500,7 @@ static int ftdi_open(struct tty_struct *tty, priv->interface, buf, 0, WDR_TIMEOUT); /* Termios defaults are set by usb_serial_init. We don't change - port->tty->termios - this would loose speed settings, etc. + port->tty->termios - this would lose speed settings, etc. This is same behaviour as serial.c/rs_open() - Kuba */ /* ftdi_set_termios will send usb control messages */ diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 07a3992abad2..373ee09975bb 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -40,6 +40,9 @@ /* AlphaMicro Components AMC-232USB01 device */ #define FTDI_AMC232_PID 0xFF00 /* Product Id */ +/* www.candapter.com Ewert Energy Systems CANdapter device */ +#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ + /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ /* the VID is the standard ftdi vid (FTDI_VID) */ #define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ @@ -75,6 +78,9 @@ /* OpenDCC (www.opendcc.de) product id */ #define FTDI_OPENDCC_PID 0xBFD8 +/* Sprog II (Andrew Crosland's SprogII DCC interface) */ +#define FTDI_SPROG_II 0xF0C8 + /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ /* they use the ftdi chipset for the USB interface and the vendor id is the same */ #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index b679a556b98d..4e2cda93da59 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -26,7 +26,7 @@ * Introduced common header to be used also in USB Gadget Framework. * Still needs some other style fixes. * - * 2007_Jun_21 Alan Cox <alan@redhat.com> + * 2007_Jun_21 Alan Cox <alan@lxorguk.ukuu.org.uk> * Minimal cleanups for some of the driver problens and tty layer abuse. * Still needs fixing to allow multiple dongles. * diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index bd07eaa300b9..809697b3c7fc 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -160,6 +160,11 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define NOVATELWIRELESS_VENDOR_ID 0x1410 +/* YISO PRODUCTS */ + +#define YISO_VENDOR_ID 0x0EAB +#define YISO_PRODUCT_U893 0xC893 + /* MERLIN EVDO PRODUCTS */ #define NOVATELWIRELESS_PRODUCT_V640 0x1100 #define NOVATELWIRELESS_PRODUCT_V620 0x1110 @@ -219,6 +224,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define ONDA_VENDOR_ID 0x19d2 #define ONDA_PRODUCT_MSA501HS 0x0001 #define ONDA_PRODUCT_ET502HS 0x0002 +#define ONDA_PRODUCT_MT503HS 0x0200 #define BANDRICH_VENDOR_ID 0x1A8D #define BANDRICH_PRODUCT_C100_1 0x1002 @@ -408,6 +414,41 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) }, { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) }, { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0003) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0004) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0005) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0006) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0007) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0008) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0009) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x000a) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x000b) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x000c) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x000d) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x000e) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x000f) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0010) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0011) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0012) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0013) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0014) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0015) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0016) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0017) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0018) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0019) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0020) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0021) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0022) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0023) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0024) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0025) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0026) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0027) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0028) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0029) }, + { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MT503HS) }, + { USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004) }, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 491c8857b644..1aed584be5eb 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -91,6 +91,8 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) }, { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) }, { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) }, + { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index a3bd039c78e9..54974f446a8c 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -110,3 +110,11 @@ /* Y.C. Cable U.S.A., Inc - USB to RS-232 */ #define YCCABLE_VENDOR_ID 0x05ad #define YCCABLE_PRODUCT_ID 0x0fba + +/* "Superial" USB - Serial */ +#define SUPERIAL_VENDOR_ID 0x5372 +#define SUPERIAL_PRODUCT_ID 0x2303 + +/* Hewlett-Packard LD220-HP POS Pole Display */ +#define HP_VENDOR_ID 0x03f0 +#define HP_LD220_PRODUCT_ID 0x3524 diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 31c42d1cae13..01d0c70d60e9 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -16,56 +16,6 @@ * For questions or problems with this driver, contact Texas Instruments * technical support, or Al Borchers <alborchers@steinerpoint.com>, or * Peter Berger <pberger@brimson.com>. - * - * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052 - * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device - * configuration. - * - * #!/bin/bash - * - * BOOT_CONFIG=1 - * ACTIVE_CONFIG=2 - * - * if [[ "$ACTION" != "add" ]] - * then - * exit - * fi - * - * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue - * - * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]] - * then - * exit - * fi - * - * PRODUCT=${PRODUCT%/?*} # delete version - * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}` - * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}` - * - * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters - * - * function scan() { - * s=$1 - * shift - * for i - * do - * if [[ $s -eq $i ]] - * then - * return 0 - * fi - * done - * return 1 - * } - * - * IFS=$IFS, - * - * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` && - * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) || - * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` && - * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`) - * then - * echo $ACTIVE_CONFIG > $CONFIG_PATH - * fi */ #include <linux/kernel.h> @@ -457,9 +407,10 @@ static int ti_startup(struct usb_serial *serial) goto free_tdev; } - /* the second configuration must be set (in sysfs by hotplug script) */ + /* the second configuration must be set */ if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) { - status = -ENODEV; + status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG); + status = status ? status : -ENODEV; goto free_tdev; } diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 3d9249632ae1..c68b738900bd 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -2,8 +2,8 @@ # USB Storage driver configuration # -comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'" -comment "may also be needed; see USB_STORAGE Help for more information" +comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;" +comment "see USB_STORAGE Help for more information" depends on USB config USB_STORAGE diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index fb9e20e624c1..bfcc1fe82518 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -167,6 +167,27 @@ UNUSUAL_DEV( 0x0421, 0x005d, 0x0001, 0x0600, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Ozan Sener <themgzzy@gmail.com> */ +UNUSUAL_DEV( 0x0421, 0x0060, 0x0551, 0x0551, + "Nokia", + "3500c", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +/* Reported by CSECSY Laszlo <boobaa@frugalware.org> */ +UNUSUAL_DEV( 0x0421, 0x0063, 0x0001, 0x0601, + "Nokia", + "Nokia 3109c", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +/* Patch for Nokia 5310 capacity */ +UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0701, + "Nokia", + "5310", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Mario Rettig <mariorettig@web.de> */ UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100, "Nokia", @@ -233,14 +254,14 @@ UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370, US_FL_MAX_SECTORS_64 ), /* Reported by Cedric Godin <cedric@belbone.be> */ -UNUSUAL_DEV( 0x0421, 0x04b9, 0x0551, 0x0551, +UNUSUAL_DEV( 0x0421, 0x04b9, 0x0500, 0x0551, "Nokia", "5300", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), /* Reported by Richard Nauber <RichardNauber@web.de> */ -UNUSUAL_DEV( 0x0421, 0x04fa, 0x0601, 0x0601, +UNUSUAL_DEV( 0x0421, 0x04fa, 0x0550, 0x0660, "Nokia", "6300", US_SC_DEVICE, US_PR_DEVICE, NULL, @@ -253,6 +274,14 @@ UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Submitted by Ricky Wong Yung Fei <evilbladewarrior@gmail.com> */ +/* Nokia 7610 Supernova - Too many sectors reported in usb storage mode */ +UNUSUAL_DEV( 0x0421, 0x00f5, 0x0000, 0x0470, + "Nokia", + "7610 Supernova", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, "SMSC", @@ -303,6 +332,18 @@ UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101, US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0), #endif +/* Reported by Tamas Kerecsen <kerecsen@bigfoot.com> + * Obviously the PROM has not been customized by the VAR; + * the Vendor and Product string descriptors are: + * Generic Mass Storage (PROTOTYPE--Remember to change idVendor) + * Generic Manufacturer (PROTOTYPE--Remember to change idVendor) + */ +UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000, + "Mitac", + "GPS", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 ), + /* * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.) * Reported by Pete Zaitcev <zaitcev@redhat.com> @@ -362,6 +403,13 @@ UNUSUAL_DEV( 0x04b0, 0x0401, 0x0200, 0x0200, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Reported by Tobias Kunze Briseno <t-linux@fictive.com> */ +UNUSUAL_DEV( 0x04b0, 0x0403, 0x0200, 0x0200, + "NIKON", + "NIKON DSC D2H", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Reported by Milinevsky Dmitry <niam.niam@gmail.com> */ UNUSUAL_DEV( 0x04b0, 0x0409, 0x0100, 0x0100, "NIKON", @@ -418,6 +466,13 @@ UNUSUAL_DEV( 0x04b0, 0x0417, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Reported by paul ready <lxtwin@homecall.co.uk> */ +UNUSUAL_DEV( 0x04b0, 0x0419, 0x0100, 0x0200, + "NIKON", + "NIKON DSC D300", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Reported by Doug Maxey (dwm@austin.ibm.com) */ UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110, "IBM", @@ -1258,6 +1313,13 @@ UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), +/* Reported by Luciano Rocha <luciano@eurotux.com> */ +UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001, + "Argosy", + "Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. * Flag will support Bulk devices which use a standards-violating 32-byte * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index f8d0a57a07cb..9a577a800db5 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -132,7 +132,7 @@ static void init_backlight(struct atmel_lcdfb_info *sinfo) bl = backlight_device_register("backlight", &sinfo->pdev->dev, sinfo, &atmel_lcdc_bl_ops); - if (IS_ERR(sinfo->backlight)) { + if (IS_ERR(bl)) { dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n", PTR_ERR(bl)); return; diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/aty/radeon_accel.c index 8718f7349d6b..a469a3d6edcb 100644 --- a/drivers/video/aty/radeon_accel.c +++ b/drivers/video/aty/radeon_accel.c @@ -5,61 +5,61 @@ * --dte */ -#define FLUSH_CACHE_WORKAROUND 1 - -void radeon_fifo_update_and_wait(struct radeonfb_info *rinfo, int entries) +static void radeon_fixup_offset(struct radeonfb_info *rinfo) { - int i; + u32 local_base; + + /* *** Ugly workaround *** */ + /* + * On some platforms, the video memory is mapped at 0 in radeon chip space + * (like PPCs) by the firmware. X will always move it up so that it's seen + * by the chip to be at the same address as the PCI BAR. + * That means that when switching back from X, there is a mismatch between + * the offsets programmed into the engine. This means that potentially, + * accel operations done before radeonfb has a chance to re-init the engine + * will have incorrect offsets, and potentially trash system memory ! + * + * The correct fix is for fbcon to never call any accel op before the engine + * has properly been re-initialized (by a call to set_var), but this is a + * complex fix. This workaround in the meantime, called before every accel + * operation, makes sure the offsets are in sync. + */ - for (i=0; i<2000000; i++) { - rinfo->fifo_free = INREG(RBBM_STATUS) & 0x7f; - if (rinfo->fifo_free >= entries) - return; - udelay(10); - } - printk(KERN_ERR "radeonfb: FIFO Timeout !\n"); - /* XXX Todo: attempt to reset the engine */ -} + radeon_fifo_wait (1); + local_base = INREG(MC_FB_LOCATION) << 16; + if (local_base == rinfo->fb_local_base) + return; -static inline void radeon_fifo_wait(struct radeonfb_info *rinfo, int entries) -{ - if (entries <= rinfo->fifo_free) - rinfo->fifo_free -= entries; - else - radeon_fifo_update_and_wait(rinfo, entries); -} + rinfo->fb_local_base = local_base; -static inline void radeonfb_set_creg(struct radeonfb_info *rinfo, u32 reg, - u32 *cache, u32 new_val) -{ - if (new_val == *cache) - return; - *cache = new_val; - radeon_fifo_wait(rinfo, 1); - OUTREG(reg, new_val); + radeon_fifo_wait (3); + OUTREG(DEFAULT_PITCH_OFFSET, (rinfo->pitch << 0x16) | + (rinfo->fb_local_base >> 10)); + OUTREG(DST_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10)); + OUTREG(SRC_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10)); } static void radeonfb_prim_fillrect(struct radeonfb_info *rinfo, const struct fb_fillrect *region) { - radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache, - rinfo->dp_gui_mc_base | GMC_BRUSH_SOLID_COLOR | ROP3_P); - radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache, - DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM); - radeonfb_set_creg(rinfo, DP_BRUSH_FRGD_CLR, &rinfo->dp_brush_fg_cache, - region->color); - - /* Ensure the dst cache is flushed and the engine idle before - * issuing the operation. - * - * This works around engine lockups on some cards - */ -#if FLUSH_CACHE_WORKAROUND - radeon_fifo_wait(rinfo, 2); + radeon_fifo_wait(4); + + OUTREG(DP_GUI_MASTER_CNTL, + rinfo->dp_gui_master_cntl /* contains, like GMC_DST_32BPP */ + | GMC_BRUSH_SOLID_COLOR + | ROP3_P); + if (radeon_get_dstbpp(rinfo->depth) != DST_8BPP) + OUTREG(DP_BRUSH_FRGD_CLR, rinfo->pseudo_palette[region->color]); + else + OUTREG(DP_BRUSH_FRGD_CLR, region->color); + OUTREG(DP_WRITE_MSK, 0xffffffff); + OUTREG(DP_CNTL, (DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM)); + + radeon_fifo_wait(2); OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL); OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE)); -#endif - radeon_fifo_wait(rinfo, 2); + + radeon_fifo_wait(2); OUTREG(DST_Y_X, (region->dy << 16) | region->dx); OUTREG(DST_WIDTH_HEIGHT, (region->width << 16) | region->height); } @@ -70,14 +70,15 @@ void radeonfb_fillrect(struct fb_info *info, const struct fb_fillrect *region) struct fb_fillrect modded; int vxres, vyres; - WARN_ON(rinfo->gfx_mode); - if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode) + if (info->state != FBINFO_STATE_RUNNING) return; if (info->flags & FBINFO_HWACCEL_DISABLED) { cfb_fillrect(info, region); return; } + radeon_fixup_offset(rinfo); + vxres = info->var.xres_virtual; vyres = info->var.yres_virtual; @@ -90,10 +91,6 @@ void radeonfb_fillrect(struct fb_info *info, const struct fb_fillrect *region) if(modded.dx + modded.width > vxres) modded.width = vxres - modded.dx; if(modded.dy + modded.height > vyres) modded.height = vyres - modded.dy; - if (info->fix.visual == FB_VISUAL_TRUECOLOR || - info->fix.visual == FB_VISUAL_DIRECTCOLOR ) - modded.color = ((u32 *) (info->pseudo_palette))[region->color]; - radeonfb_prim_fillrect(rinfo, &modded); } @@ -112,22 +109,22 @@ static void radeonfb_prim_copyarea(struct radeonfb_info *rinfo, if ( xdir < 0 ) { sx += w-1; dx += w-1; } if ( ydir < 0 ) { sy += h-1; dy += h-1; } - radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache, - rinfo->dp_gui_mc_base | - GMC_BRUSH_NONE | - GMC_SRC_DATATYPE_COLOR | - ROP3_S | - DP_SRC_SOURCE_MEMORY); - radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache, - (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0) | - (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0)); - -#if FLUSH_CACHE_WORKAROUND - radeon_fifo_wait(rinfo, 2); + radeon_fifo_wait(3); + OUTREG(DP_GUI_MASTER_CNTL, + rinfo->dp_gui_master_cntl /* i.e. GMC_DST_32BPP */ + | GMC_BRUSH_NONE + | GMC_SRC_DSTCOLOR + | ROP3_S + | DP_SRC_SOURCE_MEMORY ); + OUTREG(DP_WRITE_MSK, 0xffffffff); + OUTREG(DP_CNTL, (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0) + | (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0)); + + radeon_fifo_wait(2); OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL); OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE)); -#endif - radeon_fifo_wait(rinfo, 3); + + radeon_fifo_wait(3); OUTREG(SRC_Y_X, (sy << 16) | sx); OUTREG(DST_Y_X, (dy << 16) | dx); OUTREG(DST_HEIGHT_WIDTH, (h << 16) | w); @@ -146,14 +143,15 @@ void radeonfb_copyarea(struct fb_info *info, const struct fb_copyarea *area) modded.width = area->width; modded.height = area->height; - WARN_ON(rinfo->gfx_mode); - if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode) + if (info->state != FBINFO_STATE_RUNNING) return; if (info->flags & FBINFO_HWACCEL_DISABLED) { cfb_copyarea(info, area); return; } + radeon_fixup_offset(rinfo); + vxres = info->var.xres_virtual; vyres = info->var.yres_virtual; @@ -170,112 +168,13 @@ void radeonfb_copyarea(struct fb_info *info, const struct fb_copyarea *area) radeonfb_prim_copyarea(rinfo, &modded); } -static void radeonfb_prim_imageblit(struct radeonfb_info *rinfo, - const struct fb_image *image, - u32 fg, u32 bg) -{ - unsigned int src_bytes, dwords; - u32 *bits; - - radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache, - rinfo->dp_gui_mc_base | - GMC_BRUSH_NONE | - GMC_SRC_DATATYPE_MONO_FG_BG | - ROP3_S | - GMC_BYTE_ORDER_MSB_TO_LSB | - DP_SRC_SOURCE_HOST_DATA); - radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache, - DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM); - radeonfb_set_creg(rinfo, DP_SRC_FRGD_CLR, &rinfo->dp_src_fg_cache, fg); - radeonfb_set_creg(rinfo, DP_SRC_BKGD_CLR, &rinfo->dp_src_bg_cache, bg); - - radeon_fifo_wait(rinfo, 1); - OUTREG(DST_Y_X, (image->dy << 16) | image->dx); - - /* Ensure the dst cache is flushed and the engine idle before - * issuing the operation. - * - * This works around engine lockups on some cards - */ -#if FLUSH_CACHE_WORKAROUND - radeon_fifo_wait(rinfo, 2); - OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL); - OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE)); -#endif - - /* X here pads width to a multiple of 32 and uses the clipper to - * adjust the result. Is that really necessary ? Things seem to - * work ok for me without that and the doco doesn't seem to imply - * there is such a restriction. - */ - OUTREG(DST_WIDTH_HEIGHT, (image->width << 16) | image->height); - - src_bytes = (((image->width * image->depth) + 7) / 8) * image->height; - dwords = (src_bytes + 3) / 4; - bits = (u32*)(image->data); - - while(dwords >= 8) { - radeon_fifo_wait(rinfo, 8); -#if BITS_PER_LONG == 64 - __raw_writeq(*((u64 *)(bits)), rinfo->mmio_base + HOST_DATA0); - __raw_writeq(*((u64 *)(bits+2)), rinfo->mmio_base + HOST_DATA2); - __raw_writeq(*((u64 *)(bits+4)), rinfo->mmio_base + HOST_DATA4); - __raw_writeq(*((u64 *)(bits+6)), rinfo->mmio_base + HOST_DATA6); - bits += 8; -#else - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA0); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA1); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA2); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA3); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA4); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA5); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA6); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA7); -#endif - dwords -= 8; - } - while(dwords--) { - radeon_fifo_wait(rinfo, 1); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA0); - } -} - void radeonfb_imageblit(struct fb_info *info, const struct fb_image *image) { struct radeonfb_info *rinfo = info->par; - u32 fg, bg; - - WARN_ON(rinfo->gfx_mode); - if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode) - return; - if (!image->width || !image->height) + if (info->state != FBINFO_STATE_RUNNING) return; - - /* We only do 1 bpp color expansion for now */ - if (info->flags & FBINFO_HWACCEL_DISABLED || image->depth != 1) - goto fallback; - - /* Fallback if running out of the screen. We may do clipping - * in the future */ - if ((image->dx + image->width) > info->var.xres_virtual || - (image->dy + image->height) > info->var.yres_virtual) - goto fallback; - - if (info->fix.visual == FB_VISUAL_TRUECOLOR || - info->fix.visual == FB_VISUAL_DIRECTCOLOR) { - fg = ((u32*)(info->pseudo_palette))[image->fg_color]; - bg = ((u32*)(info->pseudo_palette))[image->bg_color]; - } else { - fg = image->fg_color; - bg = image->bg_color; - } - - radeonfb_prim_imageblit(rinfo, image, fg, bg); - return; - - fallback: - radeon_engine_idle(rinfo); + radeon_engine_idle(); cfb_imageblit(info, image); } @@ -286,8 +185,7 @@ int radeonfb_sync(struct fb_info *info) if (info->state != FBINFO_STATE_RUNNING) return 0; - - radeon_engine_idle(rinfo); + radeon_engine_idle(); return 0; } @@ -363,10 +261,9 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo) /* disable 3D engine */ OUTREG(RB3D_CNTL, 0); - rinfo->fifo_free = 0; radeonfb_engine_reset(rinfo); - radeon_fifo_wait(rinfo, 1); + radeon_fifo_wait (1); if (IS_R300_VARIANT(rinfo)) { OUTREG(RB2D_DSTCACHE_MODE, INREG(RB2D_DSTCACHE_MODE) | RB2D_DC_AUTOFLUSH_ENABLE | @@ -380,7 +277,7 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo) OUTREG(RB2D_DSTCACHE_MODE, 0); } - radeon_fifo_wait(rinfo, 3); + radeon_fifo_wait (3); /* We re-read MC_FB_LOCATION from card as it can have been * modified by XFree drivers (ouch !) */ @@ -391,57 +288,41 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo) OUTREG(DST_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10)); OUTREG(SRC_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10)); - radeon_fifo_wait(rinfo, 1); -#ifdef __BIG_ENDIAN + radeon_fifo_wait (1); +#if defined(__BIG_ENDIAN) OUTREGP(DP_DATATYPE, HOST_BIG_ENDIAN_EN, ~HOST_BIG_ENDIAN_EN); #else OUTREGP(DP_DATATYPE, 0, ~HOST_BIG_ENDIAN_EN); #endif - radeon_fifo_wait(rinfo, 2); + radeon_fifo_wait (2); OUTREG(DEFAULT_SC_TOP_LEFT, 0); OUTREG(DEFAULT_SC_BOTTOM_RIGHT, (DEFAULT_SC_RIGHT_MAX | DEFAULT_SC_BOTTOM_MAX)); - /* set default DP_GUI_MASTER_CNTL */ temp = radeon_get_dstbpp(rinfo->depth); - rinfo->dp_gui_mc_base = ((temp << 8) | GMC_CLR_CMP_CNTL_DIS); + rinfo->dp_gui_master_cntl = ((temp << 8) | GMC_CLR_CMP_CNTL_DIS); - rinfo->dp_gui_mc_cache = rinfo->dp_gui_mc_base | - GMC_BRUSH_SOLID_COLOR | - GMC_SRC_DATATYPE_COLOR; - radeon_fifo_wait(rinfo, 1); - OUTREG(DP_GUI_MASTER_CNTL, rinfo->dp_gui_mc_cache); + radeon_fifo_wait (1); + OUTREG(DP_GUI_MASTER_CNTL, (rinfo->dp_gui_master_cntl | + GMC_BRUSH_SOLID_COLOR | + GMC_SRC_DATATYPE_COLOR)); + radeon_fifo_wait (7); /* clear line drawing regs */ - radeon_fifo_wait(rinfo, 2); OUTREG(DST_LINE_START, 0); OUTREG(DST_LINE_END, 0); - /* set brush and source color regs */ - rinfo->dp_brush_fg_cache = 0xffffffff; - rinfo->dp_brush_bg_cache = 0x00000000; - rinfo->dp_src_fg_cache = 0xffffffff; - rinfo->dp_src_bg_cache = 0x00000000; - radeon_fifo_wait(rinfo, 4); - OUTREG(DP_BRUSH_FRGD_CLR, rinfo->dp_brush_fg_cache); - OUTREG(DP_BRUSH_BKGD_CLR, rinfo->dp_brush_bg_cache); - OUTREG(DP_SRC_FRGD_CLR, rinfo->dp_src_fg_cache); - OUTREG(DP_SRC_BKGD_CLR, rinfo->dp_src_bg_cache); - - /* Default direction */ - rinfo->dp_cntl_cache = DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM; - radeon_fifo_wait(rinfo, 1); - OUTREG(DP_CNTL, rinfo->dp_cntl_cache); + /* set brush color regs */ + OUTREG(DP_BRUSH_FRGD_CLR, 0xffffffff); + OUTREG(DP_BRUSH_BKGD_CLR, 0x00000000); + + /* set source color regs */ + OUTREG(DP_SRC_FRGD_CLR, 0xffffffff); + OUTREG(DP_SRC_BKGD_CLR, 0x00000000); /* default write mask */ - radeon_fifo_wait(rinfo, 1); OUTREG(DP_WRITE_MSK, 0xffffffff); - /* Default to no swapping of host data */ - radeon_fifo_wait(rinfo, 1); - OUTREG(RBBM_GUICNTL, RBBM_GUICNTL_HOST_DATA_SWAP_NONE); - - /* Make sure it's settled */ - radeon_engine_idle(rinfo); + radeon_engine_idle (); } diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/aty/radeon_backlight.c index f343ba83f0ae..1a056adb61c8 100644 --- a/drivers/video/aty/radeon_backlight.c +++ b/drivers/video/aty/radeon_backlight.c @@ -66,7 +66,7 @@ static int radeon_bl_update_status(struct backlight_device *bd) level = bd->props.brightness; del_timer_sync(&rinfo->lvds_timer); - radeon_engine_idle(rinfo); + radeon_engine_idle(); lvds_gen_cntl = INREG(LVDS_GEN_CNTL); if (level > 0) { diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index 9a5821c65ebf..d0f1a7fc2c9d 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -852,6 +852,7 @@ static int radeonfb_pan_display (struct fb_var_screeninfo *var, if (rinfo->asleep) return 0; + radeon_fifo_wait(2); OUTREG(CRTC_OFFSET, ((var->yoffset * var->xres_virtual + var->xoffset) * var->bits_per_pixel / 8) & ~7); return 0; @@ -881,6 +882,7 @@ static int radeonfb_ioctl (struct fb_info *info, unsigned int cmd, if (rc) return rc; + radeon_fifo_wait(2); if (value & 0x01) { tmp = INREG(LVDS_GEN_CNTL); @@ -938,7 +940,7 @@ int radeon_screen_blank(struct radeonfb_info *rinfo, int blank, int mode_switch) if (rinfo->lock_blank) return 0; - radeon_engine_idle(rinfo); + radeon_engine_idle(); val = INREG(CRTC_EXT_CNTL); val &= ~(CRTC_DISPLAY_DIS | CRTC_HSYNC_DIS | @@ -1046,7 +1048,7 @@ static int radeonfb_blank (int blank, struct fb_info *info) if (rinfo->asleep) return 0; - + return radeon_screen_blank(rinfo, blank, 0); } @@ -1072,6 +1074,8 @@ static int radeon_setcolreg (unsigned regno, unsigned red, unsigned green, pindex = regno; if (!rinfo->asleep) { + radeon_fifo_wait(9); + if (rinfo->bpp == 16) { pindex = regno * 8; @@ -1240,6 +1244,8 @@ static void radeon_write_pll_regs(struct radeonfb_info *rinfo, struct radeon_reg { int i; + radeon_fifo_wait(20); + /* Workaround from XFree */ if (rinfo->is_mobility) { /* A temporal workaround for the occational blanking on certain laptop @@ -1335,7 +1341,7 @@ static void radeon_lvds_timer_func(unsigned long data) { struct radeonfb_info *rinfo = (struct radeonfb_info *)data; - radeon_engine_idle(rinfo); + radeon_engine_idle(); OUTREG(LVDS_GEN_CNTL, rinfo->pending_lvds_gen_cntl); } @@ -1353,11 +1359,10 @@ void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode, if (nomodeset) return; - radeon_engine_idle(rinfo); - if (!regs_only) radeon_screen_blank(rinfo, FB_BLANK_NORMAL, 0); + radeon_fifo_wait(31); for (i=0; i<10; i++) OUTREG(common_regs[i].reg, common_regs[i].val); @@ -1385,6 +1390,7 @@ void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode, radeon_write_pll_regs(rinfo, mode); if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) { + radeon_fifo_wait(10); OUTREG(FP_CRTC_H_TOTAL_DISP, mode->fp_crtc_h_total_disp); OUTREG(FP_CRTC_V_TOTAL_DISP, mode->fp_crtc_v_total_disp); OUTREG(FP_H_SYNC_STRT_WID, mode->fp_h_sync_strt_wid); @@ -1399,6 +1405,7 @@ void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode, if (!regs_only) radeon_screen_blank(rinfo, FB_BLANK_UNBLANK, 0); + radeon_fifo_wait(2); OUTPLL(VCLK_ECP_CNTL, mode->vclk_ecp_cntl); return; @@ -1549,7 +1556,7 @@ static int radeonfb_set_par(struct fb_info *info) /* We always want engine to be idle on a mode switch, even * if we won't actually change the mode */ - radeon_engine_idle(rinfo); + radeon_engine_idle(); hSyncStart = mode->xres + mode->right_margin; hSyncEnd = hSyncStart + mode->hsync_len; @@ -1844,6 +1851,7 @@ static int radeonfb_set_par(struct fb_info *info) return 0; } + static struct fb_ops radeonfb_ops = { .owner = THIS_MODULE, .fb_check_var = radeonfb_check_var, @@ -1867,7 +1875,6 @@ static int __devinit radeon_set_fbinfo (struct radeonfb_info *rinfo) info->par = rinfo; info->pseudo_palette = rinfo->pseudo_palette; info->flags = FBINFO_DEFAULT - | FBINFO_HWACCEL_IMAGEBLIT | FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_XPAN @@ -1999,6 +2006,7 @@ static void radeon_identify_vram(struct radeonfb_info *rinfo) u32 tom = INREG(NB_TOM); tmp = ((((tom >> 16) - (tom & 0xffff) + 1) << 6) * 1024); + radeon_fifo_wait(6); OUTREG(MC_FB_LOCATION, tom); OUTREG(DISPLAY_BASE_ADDR, (tom & 0xffff) << 16); OUTREG(CRTC2_DISPLAY_BASE_ADDR, (tom & 0xffff) << 16); diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index 3df5015f1d13..675abdafc2d8 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -2653,9 +2653,9 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) if (!(info->flags & FBINFO_HWACCEL_DISABLED)) { /* Make sure engine is reset */ - radeon_engine_idle(rinfo); + radeon_engine_idle(); radeonfb_engine_reset(rinfo); - radeon_engine_idle(rinfo); + radeon_engine_idle(); } /* Blank display and LCD */ @@ -2767,7 +2767,7 @@ int radeonfb_pci_resume(struct pci_dev *pdev) rinfo->asleep = 0; } else - radeon_engine_idle(rinfo); + radeon_engine_idle(); /* Restore display & engine */ radeon_write_mode (rinfo, &rinfo->state, 1); diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h index ea0b5b47acaf..3ea1b00fdd22 100644 --- a/drivers/video/aty/radeonfb.h +++ b/drivers/video/aty/radeonfb.h @@ -336,15 +336,7 @@ struct radeonfb_info { int mon2_type; u8 *mon2_EDID; - /* accel bits */ - u32 dp_gui_mc_base; - u32 dp_gui_mc_cache; - u32 dp_cntl_cache; - u32 dp_brush_fg_cache; - u32 dp_brush_bg_cache; - u32 dp_src_fg_cache; - u32 dp_src_bg_cache; - u32 fifo_free; + u32 dp_gui_master_cntl; struct pll_info pll; @@ -356,7 +348,6 @@ struct radeonfb_info { int lock_blank; int dynclk; int no_schedule; - int gfx_mode; enum radeon_pm_mode pm_mode; reinit_function_ptr reinit_func; @@ -401,14 +392,8 @@ static inline void _radeon_msleep(struct radeonfb_info *rinfo, unsigned long ms) #define OUTREG8(addr,val) writeb(val, (rinfo->mmio_base)+addr) #define INREG16(addr) readw((rinfo->mmio_base)+addr) #define OUTREG16(addr,val) writew(val, (rinfo->mmio_base)+addr) - -#ifdef CONFIG_PPC -#define INREG(addr) ({ eieio(); ld_le32(rinfo->mmio_base+(addr)); }) -#define OUTREG(addr,val) do { eieio(); st_le32(rinfo->mmio_base+(addr),(val)); } while(0) -#else #define INREG(addr) readl((rinfo->mmio_base)+addr) #define OUTREG(addr,val) writel(val, (rinfo->mmio_base)+addr) -#endif static inline void _OUTREGP(struct radeonfb_info *rinfo, u32 addr, u32 val, u32 mask) @@ -550,7 +535,17 @@ static inline u32 radeon_get_dstbpp(u16 depth) * 2D Engine helper routines */ -extern void radeon_fifo_update_and_wait(struct radeonfb_info *rinfo, int entries); +static inline void _radeon_fifo_wait(struct radeonfb_info *rinfo, int entries) +{ + int i; + + for (i=0; i<2000000; i++) { + if ((INREG(RBBM_STATUS) & 0x7f) >= entries) + return; + udelay(1); + } + printk(KERN_ERR "radeonfb: FIFO Timeout !\n"); +} static inline void radeon_engine_flush (struct radeonfb_info *rinfo) { @@ -563,7 +558,7 @@ static inline void radeon_engine_flush (struct radeonfb_info *rinfo) /* Ensure FIFO is empty, ie, make sure the flush commands * has reached the cache */ - radeon_fifo_update_and_wait(rinfo, 64); + _radeon_fifo_wait (rinfo, 64); /* Wait for the flush to complete */ for (i=0; i < 2000000; i++) { @@ -575,12 +570,12 @@ static inline void radeon_engine_flush (struct radeonfb_info *rinfo) } -static inline void radeon_engine_idle(struct radeonfb_info *rinfo) +static inline void _radeon_engine_idle(struct radeonfb_info *rinfo) { int i; /* ensure FIFO is empty before waiting for idle */ - radeon_fifo_update_and_wait (rinfo, 64); + _radeon_fifo_wait (rinfo, 64); for (i=0; i<2000000; i++) { if (((INREG(RBBM_STATUS) & GUI_ACTIVE)) == 0) { @@ -593,6 +588,8 @@ static inline void radeon_engine_idle(struct radeonfb_info *rinfo) } +#define radeon_engine_idle() _radeon_engine_idle(rinfo) +#define radeon_fifo_wait(entries) _radeon_fifo_wait(rinfo,entries) #define radeon_msleep(ms) _radeon_msleep(rinfo,ms) @@ -622,7 +619,6 @@ extern void radeonfb_imageblit(struct fb_info *p, const struct fb_image *image); extern int radeonfb_sync(struct fb_info *info); extern void radeonfb_engine_init (struct radeonfb_info *rinfo); extern void radeonfb_engine_reset(struct radeonfb_info *rinfo); -extern void radeon_fixup_mem_offset(struct radeonfb_info *rinfo); /* Other functions */ extern int radeon_screen_blank(struct radeonfb_info *rinfo, int blank, int mode_switch); diff --git a/drivers/video/backlight/da903x.c b/drivers/video/backlight/da903x.c index 242c38250166..93bb4340cc64 100644 --- a/drivers/video/backlight/da903x.c +++ b/drivers/video/backlight/da903x.c @@ -119,6 +119,7 @@ static int da903x_backlight_probe(struct platform_device *pdev) default: dev_err(&pdev->dev, "invalid backlight device ID(%d)\n", pdev->id); + kfree(data); return -EINVAL; } @@ -130,6 +131,7 @@ static int da903x_backlight_probe(struct platform_device *pdev) data, &da903x_backlight_ops); if (IS_ERR(bl)) { dev_err(&pdev->dev, "failed to register backlight\n"); + kfree(data); return PTR_ERR(bl); } diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c index 8e1731d3b228..680e57b616cd 100644 --- a/drivers/video/backlight/lcd.c +++ b/drivers/video/backlight/lcd.c @@ -42,10 +42,13 @@ static int fb_notifier_callback(struct notifier_block *self, mutex_lock(&ld->ops_lock); if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info)) { - if (event == FB_EVENT_BLANK) - ld->ops->set_power(ld, *(int *)evdata->data); - else - ld->ops->set_mode(ld, evdata->data); + if (event == FB_EVENT_BLANK) { + if (ld->ops->set_power) + ld->ops->set_power(ld, *(int *)evdata->data); + } else { + if (ld->ops->set_mode) + ld->ops->set_mode(ld, evdata->data); + } } mutex_unlock(&ld->ops_lock); return 0; diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index 8a8760230bc7..a2aa6ddffbe2 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -2462,8 +2462,7 @@ static int __init cirrusfb_init(void) #ifndef MODULE static int __init cirrusfb_setup(char *options) { - char *this_opt, s[32]; - int i; + char *this_opt; DPRINTK("ENTER\n"); diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index b92947d62ad6..0b2adefe9e3d 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -2389,16 +2389,13 @@ static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch) if (!fbcon_is_inactive(vc, info)) { if (ops->blank_state != blank) { - int ret = 1; - ops->blank_state = blank; fbcon_cursor(vc, blank ? CM_ERASE : CM_DRAW); ops->cursor_flash = (!blank); - if (info->fbops->fb_blank) - ret = info->fbops->fb_blank(blank, info); - if (ret) - fbcon_generic_blank(vc, info, blank); + if (!(info->flags & FBINFO_MISC_USEREVENT)) + if (fb_blank(info, blank)) + fbcon_generic_blank(vc, info, blank); } if (!blank) @@ -3534,12 +3531,18 @@ static void fbcon_exit(void) softback_buf = 0UL; for (i = 0; i < FB_MAX; i++) { + int pending; + mapped = 0; info = registered_fb[i]; if (info == NULL) continue; + pending = cancel_work_sync(&info->queue); + DPRINTK("fbcon: %s pending work\n", (pending ? "canceled" : + "no")); + for (j = first_fb_vc; j <= last_fb_vc; j++) { if (con2fb_map[j] == i) mapped = 1; diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index 1d5ae39cb271..3c65b0d67617 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -230,7 +230,7 @@ static void fb_set_logo_directpalette(struct fb_info *info, greenshift = info->var.green.offset; blueshift = info->var.blue.offset; - for (i = 32; i < logo->clutsize; i++) + for (i = 32; i < 32 + logo->clutsize; i++) palette[i] = i << redshift | i << greenshift | i << blueshift; } diff --git a/drivers/video/macfb.c b/drivers/video/macfb.c index b790ddff76f9..ee380d5f3410 100644 --- a/drivers/video/macfb.c +++ b/drivers/video/macfb.c @@ -164,7 +164,6 @@ static struct fb_var_screeninfo macfb_defined = { }; static struct fb_fix_screeninfo macfb_fix = { - .id = "Macintosh ", .type = FB_TYPE_PACKED_PIXELS, .accel = FB_ACCEL_NONE, }; @@ -760,22 +759,22 @@ static int __init macfb_init(void) switch(ndev->dr_hw) { case NUBUS_DRHW_APPLE_MDC: - strcat( macfb_fix.id, "Display Card" ); + strcpy(macfb_fix.id, "Mac Disp. Card"); macfb_setpalette = mdc_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; break; case NUBUS_DRHW_APPLE_TFB: - strcat( macfb_fix.id, "Toby" ); + strcpy(macfb_fix.id, "Toby"); macfb_setpalette = toby_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; break; case NUBUS_DRHW_APPLE_JET: - strcat( macfb_fix.id, "Jet"); + strcpy(macfb_fix.id, "Jet"); macfb_setpalette = jet_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; break; default: - strcat( macfb_fix.id, "Generic NuBus" ); + strcpy(macfb_fix.id, "Generic NuBus"); break; } } @@ -786,21 +785,11 @@ static int __init macfb_init(void) if (!video_is_nubus) switch( mac_bi_data.id ) { - /* These don't have onboard video. Eventually, we may - be able to write separate framebuffer drivers for - them (tobyfb.c, hiresfb.c, etc, etc) */ - case MAC_MODEL_II: - case MAC_MODEL_IIX: - case MAC_MODEL_IICX: - case MAC_MODEL_IIFX: - strcat( macfb_fix.id, "Generic NuBus" ); - break; - /* Valkyrie Quadras */ case MAC_MODEL_Q630: /* I'm not sure about this one */ case MAC_MODEL_P588: - strcat( macfb_fix.id, "Valkyrie built-in" ); + strcpy(macfb_fix.id, "Valkyrie"); macfb_setpalette = valkyrie_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; valkyrie_cmap_regs = ioremap(DAC_BASE, 0x1000); @@ -823,7 +812,7 @@ static int __init macfb_init(void) case MAC_MODEL_Q700: case MAC_MODEL_Q900: case MAC_MODEL_Q950: - strcat( macfb_fix.id, "DAFB built-in" ); + strcpy(macfb_fix.id, "DAFB"); macfb_setpalette = dafb_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; dafb_cmap_regs = ioremap(DAFB_BASE, 0x1000); @@ -831,7 +820,7 @@ static int __init macfb_init(void) /* LC II uses the V8 framebuffer */ case MAC_MODEL_LCII: - strcat( macfb_fix.id, "V8 built-in" ); + strcpy(macfb_fix.id, "V8"); macfb_setpalette = v8_brazil_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); @@ -843,7 +832,7 @@ static int __init macfb_init(void) case MAC_MODEL_IIVI: case MAC_MODEL_IIVX: case MAC_MODEL_P600: - strcat( macfb_fix.id, "Brazil built-in" ); + strcpy(macfb_fix.id, "Brazil"); macfb_setpalette = v8_brazil_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); @@ -860,7 +849,7 @@ static int __init macfb_init(void) case MAC_MODEL_P460: macfb_setpalette = v8_brazil_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "Sonora built-in" ); + strcpy(macfb_fix.id, "Sonora"); v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); break; @@ -871,7 +860,7 @@ static int __init macfb_init(void) case MAC_MODEL_IISI: macfb_setpalette = rbv_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "RBV built-in" ); + strcpy(macfb_fix.id, "RBV"); rbv_cmap_regs = ioremap(DAC_BASE, 0x1000); break; @@ -880,7 +869,7 @@ static int __init macfb_init(void) case MAC_MODEL_C660: macfb_setpalette = civic_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "Civic built-in" ); + strcpy(macfb_fix.id, "Civic"); civic_cmap_regs = ioremap(CIVIC_BASE, 0x1000); break; @@ -901,7 +890,7 @@ static int __init macfb_init(void) v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); } - strcat( macfb_fix.id, "LC built-in" ); + strcpy(macfb_fix.id, "LC"); break; /* We think this may be like the LC II */ case MAC_MODEL_CCL: @@ -911,18 +900,18 @@ static int __init macfb_init(void) v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); } - strcat( macfb_fix.id, "Color Classic built-in" ); + strcpy(macfb_fix.id, "Color Classic"); break; /* And we *do* mean "weirdos" */ case MAC_MODEL_TV: - strcat( macfb_fix.id, "Mac TV built-in" ); + strcpy(macfb_fix.id, "Mac TV"); break; /* These don't have colour, so no need to worry */ case MAC_MODEL_SE30: case MAC_MODEL_CLII: - strcat( macfb_fix.id, "Monochrome built-in" ); + strcpy(macfb_fix.id, "Monochrome"); break; /* Powerbooks are particularly difficult. Many of @@ -935,7 +924,7 @@ static int __init macfb_init(void) case MAC_MODEL_PB140: case MAC_MODEL_PB145: case MAC_MODEL_PB170: - strcat( macfb_fix.id, "DDC built-in" ); + strcpy(macfb_fix.id, "DDC"); break; /* Internal is GSC, External (if present) is ViSC */ @@ -945,13 +934,13 @@ static int __init macfb_init(void) case MAC_MODEL_PB180: case MAC_MODEL_PB210: case MAC_MODEL_PB230: - strcat( macfb_fix.id, "GSC built-in" ); + strcpy(macfb_fix.id, "GSC"); break; /* Internal is TIM, External is ViSC */ case MAC_MODEL_PB165C: case MAC_MODEL_PB180C: - strcat( macfb_fix.id, "TIM built-in" ); + strcpy(macfb_fix.id, "TIM"); break; /* Internal is CSC, External is Keystone+Ariel. */ @@ -963,12 +952,12 @@ static int __init macfb_init(void) case MAC_MODEL_PB280C: macfb_setpalette = csc_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "CSC built-in" ); + strcpy(macfb_fix.id, "CSC"); csc_cmap_regs = ioremap(CSC_BASE, 0x1000); break; default: - strcat( macfb_fix.id, "Unknown/Unsupported built-in" ); + strcpy(macfb_fix.id, "Unknown"); break; } @@ -978,16 +967,23 @@ static int __init macfb_init(void) fb_info.pseudo_palette = pseudo_palette; fb_info.flags = FBINFO_DEFAULT; - fb_alloc_cmap(&fb_info.cmap, video_cmap_len, 0); + err = fb_alloc_cmap(&fb_info.cmap, video_cmap_len, 0); + if (err) + goto fail_unmap; err = register_framebuffer(&fb_info); - if (!err) - printk("fb%d: %s frame buffer device\n", - fb_info.node, fb_info.fix.id); - else { - iounmap(fb_info.screen_base); - iounmap_macfb(); - } + if (err) + goto fail_dealloc; + + printk("fb%d: %s frame buffer device\n", + fb_info.node, fb_info.fix.id); + return 0; + +fail_dealloc: + fb_dealloc_cmap(&fb_info.cmap); +fail_unmap: + iounmap(fb_info.screen_base); + iounmap_macfb(); return err; } diff --git a/drivers/video/mb862xx/mb862xxfb.c b/drivers/video/mb862xx/mb862xxfb.c index 38718d95fbb9..fb64234a3825 100644 --- a/drivers/video/mb862xx/mb862xxfb.c +++ b/drivers/video/mb862xx/mb862xxfb.c @@ -927,9 +927,9 @@ static int __devinit mb862xx_pci_probe(struct pci_dev *pdev, } dev_dbg(dev, "fb phys 0x%llx 0x%lx\n", - (u64)par->fb_base_phys, (ulong)par->mapped_vram); + (unsigned long long)par->fb_base_phys, (ulong)par->mapped_vram); dev_dbg(dev, "mmio phys 0x%llx 0x%lx\n", - (u64)par->mmio_base_phys, (ulong)par->mmio_len); + (unsigned long long)par->mmio_base_phys, (ulong)par->mmio_len); if (mb862xx_pci_gdc_init(par)) goto io_unmap; diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile index 99da8b6d2c36..ed13889c1162 100644 --- a/drivers/video/omap/Makefile +++ b/drivers/video/omap/Makefile @@ -23,7 +23,6 @@ objs-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o -objs-y$(CONFIG_MACH_SX1) += lcd_sx1.o omapfb-objs := $(objs-yy) diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c deleted file mode 100644 index e55de201b8ff..000000000000 --- a/drivers/video/omap/lcd_sx1.c +++ /dev/null @@ -1,327 +0,0 @@ -/* - * LCD panel support for the Siemens SX1 mobile phone - * - * Current version : Vovan888@gmail.com, great help from FCA00000 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/io.h> - -#include <mach/gpio.h> -#include <mach/omapfb.h> -#include <mach/mcbsp.h> -#include <mach/mux.h> - -/* - * OMAP310 GPIO registers - */ -#define GPIO_DATA_INPUT 0xfffce000 -#define GPIO_DATA_OUTPUT 0xfffce004 -#define GPIO_DIR_CONTROL 0xfffce008 -#define GPIO_INT_CONTROL 0xfffce00c -#define GPIO_INT_MASK 0xfffce010 -#define GPIO_INT_STATUS 0xfffce014 -#define GPIO_PIN_CONTROL 0xfffce018 - - -#define A_LCD_SSC_RD 3 -#define A_LCD_SSC_SD 7 -#define _A_LCD_RESET 9 -#define _A_LCD_SSC_CS 12 -#define _A_LCD_SSC_A0 13 - -#define DSP_REG 0xE1017024 - -const unsigned char INIT_1[12] = { - 0x1C, 0x02, 0x88, 0x00, 0x1E, 0xE0, 0x00, 0xDC, 0x00, 0x02, 0x00 -}; - -const unsigned char INIT_2[127] = { - 0x15, 0x00, 0x29, 0x00, 0x3E, 0x00, 0x51, 0x00, - 0x65, 0x00, 0x7A, 0x00, 0x8D, 0x00, 0xA1, 0x00, - 0xB6, 0x00, 0xC7, 0x00, 0xD8, 0x00, 0xEB, 0x00, - 0xFB, 0x00, 0x0B, 0x01, 0x1B, 0x01, 0x27, 0x01, - 0x34, 0x01, 0x41, 0x01, 0x4C, 0x01, 0x55, 0x01, - 0x5F, 0x01, 0x68, 0x01, 0x70, 0x01, 0x78, 0x01, - 0x7E, 0x01, 0x86, 0x01, 0x8C, 0x01, 0x94, 0x01, - 0x9B, 0x01, 0xA1, 0x01, 0xA4, 0x01, 0xA9, 0x01, - 0xAD, 0x01, 0xB2, 0x01, 0xB7, 0x01, 0xBC, 0x01, - 0xC0, 0x01, 0xC4, 0x01, 0xC8, 0x01, 0xCB, 0x01, - 0xCF, 0x01, 0xD2, 0x01, 0xD5, 0x01, 0xD8, 0x01, - 0xDB, 0x01, 0xE0, 0x01, 0xE3, 0x01, 0xE6, 0x01, - 0xE8, 0x01, 0xEB, 0x01, 0xEE, 0x01, 0xF1, 0x01, - 0xF3, 0x01, 0xF8, 0x01, 0xF9, 0x01, 0xFC, 0x01, - 0x00, 0x02, 0x03, 0x02, 0x07, 0x02, 0x09, 0x02, - 0x0E, 0x02, 0x13, 0x02, 0x1C, 0x02, 0x00 -}; - -const unsigned char INIT_3[15] = { - 0x14, 0x26, 0x33, 0x3D, 0x45, 0x4D, 0x53, 0x59, - 0x5E, 0x63, 0x67, 0x6D, 0x71, 0x78, 0xFF -}; - -static void epson_sendbyte(int flag, unsigned char byte) -{ - int i, shifter = 0x80; - - if (!flag) - gpio_set_value(_A_LCD_SSC_A0, 0); - mdelay(2); - gpio_set_value(A_LCD_SSC_RD, 1); - - gpio_set_value(A_LCD_SSC_SD, flag); - - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200); - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202); - for (i = 0; i < 8; i++) { - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200); - gpio_set_value(A_LCD_SSC_SD, shifter & byte); - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202); - shifter >>= 1; - } - gpio_set_value(_A_LCD_SSC_A0, 1); -} - -static void init_system(void) -{ - omap_mcbsp_request(OMAP_MCBSP3); - omap_mcbsp_stop(OMAP_MCBSP3); -} - -static void setup_GPIO(void) -{ - /* new wave */ - gpio_request(A_LCD_SSC_RD, "lcd_ssc_rd"); - gpio_request(A_LCD_SSC_SD, "lcd_ssc_sd"); - gpio_request(_A_LCD_RESET, "lcd_reset"); - gpio_request(_A_LCD_SSC_CS, "lcd_ssc_cs"); - gpio_request(_A_LCD_SSC_A0, "lcd_ssc_a0"); - - /* set GPIOs to output, with initial data */ - gpio_direction_output(A_LCD_SSC_RD, 1); - gpio_direction_output(A_LCD_SSC_SD, 0); - gpio_direction_output(_A_LCD_RESET, 0); - gpio_direction_output(_A_LCD_SSC_CS, 1); - gpio_direction_output(_A_LCD_SSC_A0, 1); -} - -static void display_init(void) -{ - int i; - - omap_cfg_reg(MCBSP3_CLKX); - - mdelay(2); - setup_GPIO(); - mdelay(2); - - /* reset LCD */ - gpio_set_value(A_LCD_SSC_SD, 1); - epson_sendbyte(0, 0x25); - - gpio_set_value(_A_LCD_RESET, 0); - mdelay(10); - gpio_set_value(_A_LCD_RESET, 1); - - gpio_set_value(_A_LCD_SSC_CS, 1); - mdelay(2); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD, phase 1 */ - epson_sendbyte(0, 0xCA); - for (i = 0; i < 10; i++) - epson_sendbyte(1, INIT_1[i]); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 2 */ - epson_sendbyte(0, 0xCB); - for (i = 0; i < 125; i++) - epson_sendbyte(1, INIT_2[i]); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 2a */ - epson_sendbyte(0, 0xCC); - for (i = 0; i < 14; i++) - epson_sendbyte(1, INIT_3[i]); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 3 */ - epson_sendbyte(0, 0xBC); - epson_sendbyte(1, 0x08); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 4 */ - epson_sendbyte(0, 0x07); - epson_sendbyte(1, 0x05); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 5 */ - epson_sendbyte(0, 0x94); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 6 */ - epson_sendbyte(0, 0xC6); - epson_sendbyte(1, 0x80); - gpio_set_value(_A_LCD_SSC_CS, 1); - mdelay(100); /* used to be 1000 */ - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 7 */ - epson_sendbyte(0, 0x16); - epson_sendbyte(1, 0x02); - epson_sendbyte(1, 0x00); - epson_sendbyte(1, 0xB1); - epson_sendbyte(1, 0x00); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 8 */ - epson_sendbyte(0, 0x76); - epson_sendbyte(1, 0x00); - epson_sendbyte(1, 0x00); - epson_sendbyte(1, 0xDB); - epson_sendbyte(1, 0x00); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 9 */ - epson_sendbyte(0, 0xAF); - gpio_set_value(_A_LCD_SSC_CS, 1); -} - -static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) -{ - return 0; -} - -static void sx1_panel_cleanup(struct lcd_panel *panel) -{ -} - -static void sx1_panel_disable(struct lcd_panel *panel) -{ - printk(KERN_INFO "SX1: LCD panel disable\n"); - sx1_setmmipower(0); - gpio_set_value(_A_LCD_SSC_CS, 1); - - epson_sendbyte(0, 0x25); - gpio_set_value(_A_LCD_SSC_CS, 0); - - epson_sendbyte(0, 0xAE); - gpio_set_value(_A_LCD_SSC_CS, 1); - mdelay(100); - gpio_set_value(_A_LCD_SSC_CS, 0); - - epson_sendbyte(0, 0x95); - gpio_set_value(_A_LCD_SSC_CS, 1); -} - -static int sx1_panel_enable(struct lcd_panel *panel) -{ - printk(KERN_INFO "lcd_sx1: LCD panel enable\n"); - init_system(); - display_init(); - - sx1_setmmipower(1); - sx1_setbacklight(0x18); - sx1_setkeylight (0x06); - return 0; -} - - -static unsigned long sx1_panel_get_caps(struct lcd_panel *panel) -{ - return 0; -} - -struct lcd_panel sx1_panel = { - .name = "sx1", - .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC | - OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK | - OMAP_LCDC_INV_OUTPUT_EN, - - .x_res = 176, - .y_res = 220, - .data_lines = 16, - .bpp = 16, - .hsw = 5, - .hfp = 5, - .hbp = 5, - .vsw = 2, - .vfp = 1, - .vbp = 1, - .pixel_clock = 1500, - - .init = sx1_panel_init, - .cleanup = sx1_panel_cleanup, - .enable = sx1_panel_enable, - .disable = sx1_panel_disable, - .get_caps = sx1_panel_get_caps, -}; - -static int sx1_panel_probe(struct platform_device *pdev) -{ - omapfb_register_panel(&sx1_panel); - return 0; -} - -static int sx1_panel_remove(struct platform_device *pdev) -{ - return 0; -} - -static int sx1_panel_suspend(struct platform_device *pdev, pm_message_t mesg) -{ - return 0; -} - -static int sx1_panel_resume(struct platform_device *pdev) -{ - return 0; -} - -struct platform_driver sx1_panel_driver = { - .probe = sx1_panel_probe, - .remove = sx1_panel_remove, - .suspend = sx1_panel_suspend, - .resume = sx1_panel_resume, - .driver = { - .name = "lcd_sx1", - .owner = THIS_MODULE, - }, -}; - -static int sx1_panel_drv_init(void) -{ - return platform_driver_register(&sx1_panel_driver); -} - -static void sx1_panel_drv_cleanup(void) -{ - platform_driver_unregister(&sx1_panel_driver); -} - -module_init(sx1_panel_drv_init); -module_exit(sx1_panel_drv_cleanup); diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index 5a5e407dc45f..1a49519dafa4 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -392,7 +392,7 @@ static void set_fb_fix(struct fb_info *fbi) int bpp; rg = &plane->fbdev->mem_desc.region[plane->idx]; - fbi->screen_base = (char __iomem *)rg->vaddr; + fbi->screen_base = rg->vaddr; fix->smem_start = rg->paddr; fix->smem_len = rg->size; diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 97204497d9f7..cc59c52e1103 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -804,6 +804,9 @@ static int pxafb_smart_thread(void *arg) static int pxafb_smart_init(struct pxafb_info *fbi) { + if (!(fbi->lccr0 | LCCR0_LCDT)) + return 0; + fbi->smart_thread = kthread_run(pxafb_smart_thread, fbi, "lcd_refresh"); if (IS_ERR(fbi->smart_thread)) { @@ -1372,7 +1375,7 @@ static void pxafb_decode_mach_info(struct pxafb_info *fbi, fbi->cmap_inverse = inf->cmap_inverse; fbi->cmap_static = inf->cmap_static; - switch (lcd_conn & 0xf) { + switch (lcd_conn & LCD_TYPE_MASK) { case LCD_TYPE_MONO_STN: fbi->lccr0 = LCCR0_CMS; break; diff --git a/drivers/video/tmiofb.c b/drivers/video/tmiofb.c index 2a380011e9ba..7baf2dd12d50 100644 --- a/drivers/video/tmiofb.c +++ b/drivers/video/tmiofb.c @@ -222,6 +222,9 @@ static irqreturn_t tmiofb_irq(int irq, void *__info) unsigned int bbisc = tmio_ioread16(par->lcr + LCR_BBISC); + tmio_iowrite16(bbisc, par->lcr + LCR_BBISC); + +#ifdef CONFIG_FB_TMIO_ACCELL /* * We were in polling mode and now we got correct irq. * Switch back to IRQ-based sync of command FIFO @@ -231,9 +234,6 @@ static irqreturn_t tmiofb_irq(int irq, void *__info) par->use_polling = false; } - tmio_iowrite16(bbisc, par->lcr + LCR_BBISC); - -#ifdef CONFIG_FB_TMIO_ACCELL if (bbisc & 1) wake_up(&par->wait_acc); #endif @@ -938,7 +938,9 @@ static void tmiofb_dump_regs(struct platform_device *dev) static int tmiofb_suspend(struct platform_device *dev, pm_message_t state) { struct fb_info *info = platform_get_drvdata(dev); +#ifdef CONFIG_FB_TMIO_ACCELL struct tmiofb_par *par = info->par; +#endif struct mfd_cell *cell = dev->dev.platform_data; int retval = 0; @@ -950,12 +952,14 @@ static int tmiofb_suspend(struct platform_device *dev, pm_message_t state) info->fbops->fb_sync(info); +#ifdef CONFIG_FB_TMIO_ACCELL /* * The fb should be usable even if interrupts are disabled (and they are * during suspend/resume). Switch temporary to forced polling. */ printk(KERN_INFO "tmiofb: switching to polling\n"); par->use_polling = true; +#endif tmiofb_hw_stop(dev); if (cell->suspend) diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c index 0132eae06f55..73ac754ad801 100644 --- a/drivers/video/via/viafbdev.c +++ b/drivers/video/via/viafbdev.c @@ -2036,30 +2036,30 @@ static int viafb_vt1636_proc_write(struct file *file, return count; } -static void viafb_init_proc(struct proc_dir_entry *viafb_entry) +static void viafb_init_proc(struct proc_dir_entry **viafb_entry) { struct proc_dir_entry *entry; - viafb_entry = proc_mkdir("viafb", NULL); + *viafb_entry = proc_mkdir("viafb", NULL); if (viafb_entry) { - entry = create_proc_entry("dvp0", 0, viafb_entry); + entry = create_proc_entry("dvp0", 0, *viafb_entry); if (entry) { entry->owner = THIS_MODULE; entry->read_proc = viafb_dvp0_proc_read; entry->write_proc = viafb_dvp0_proc_write; } - entry = create_proc_entry("dvp1", 0, viafb_entry); + entry = create_proc_entry("dvp1", 0, *viafb_entry); if (entry) { entry->owner = THIS_MODULE; entry->read_proc = viafb_dvp1_proc_read; entry->write_proc = viafb_dvp1_proc_write; } - entry = create_proc_entry("dfph", 0, viafb_entry); + entry = create_proc_entry("dfph", 0, *viafb_entry); if (entry) { entry->owner = THIS_MODULE; entry->read_proc = viafb_dfph_proc_read; entry->write_proc = viafb_dfph_proc_write; } - entry = create_proc_entry("dfpl", 0, viafb_entry); + entry = create_proc_entry("dfpl", 0, *viafb_entry); if (entry) { entry->owner = THIS_MODULE; entry->read_proc = viafb_dfpl_proc_read; @@ -2068,7 +2068,7 @@ static void viafb_init_proc(struct proc_dir_entry *viafb_entry) if (VT1636_LVDS == viaparinfo->chip_info->lvds_chip_info. lvds_chip_name || VT1636_LVDS == viaparinfo->chip_info->lvds_chip_info2.lvds_chip_name) { - entry = create_proc_entry("vt1636", 0, viafb_entry); + entry = create_proc_entry("vt1636", 0, *viafb_entry); if (entry) { entry->owner = THIS_MODULE; entry->read_proc = viafb_vt1636_proc_read; @@ -2087,6 +2087,7 @@ static void viafb_remove_proc(struct proc_dir_entry *viafb_entry) remove_proc_entry("dfpl", viafb_entry); remove_proc_entry("vt1636", viafb_entry); remove_proc_entry("vt1625", viafb_entry); + remove_proc_entry("viafb", NULL); } static int __devinit via_pci_probe(void) @@ -2348,7 +2349,7 @@ static int __devinit via_pci_probe(void) viafbinfo->node, viafbinfo->fix.id, default_var.xres, default_var.yres, default_var.bits_per_pixel); - viafb_init_proc(viaparinfo->proc_entry); + viafb_init_proc(&viaparinfo->proc_entry); viafb_init_dac(IGA2); return 0; } diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index a463b3dd837b..2493f05e9f61 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -668,7 +668,7 @@ static struct xenbus_device_id xenfb_ids[] = { { "" } }; -static struct xenbus_driver xenfb = { +static struct xenbus_driver xenfb_driver = { .name = "vfb", .owner = THIS_MODULE, .ids = xenfb_ids, @@ -687,12 +687,12 @@ static int __init xenfb_init(void) if (xen_initial_domain()) return -ENODEV; - return xenbus_register_frontend(&xenfb); + return xenbus_register_frontend(&xenfb_driver); } static void __exit xenfb_cleanup(void) { - xenbus_unregister_driver(&xenfb); + xenbus_unregister_driver(&xenfb_driver); } module_init(xenfb_init); diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c index 5da3d2423cc0..40a3a2afbfe7 100644 --- a/drivers/video/xilinxfb.c +++ b/drivers/video/xilinxfb.c @@ -298,8 +298,9 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr, /* Put a banner in the log (for DEBUG) */ dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs); - dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n", - (void*)drvdata->fb_phys, drvdata->fb_virt, fbsize); + dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n", + (unsigned long long) drvdata->fb_phys, drvdata->fb_virt, + fbsize); return 0; /* success */ diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index c4493091c655..90616822cd20 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -36,7 +36,7 @@ config W1_MASTER_DS2482 config W1_MASTER_DS1WM tristate "Maxim DS1WM 1-wire busmaster" - depends on W1 && ARM + depends on W1 && ARM && HAVE_CLK help Say Y here to enable the DS1WM 1-wire driver, such as that in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like @@ -52,5 +52,12 @@ config W1_MASTER_GPIO This support is also available as a module. If so, the module will be called w1-gpio.ko. +config HDQ_MASTER_OMAP + tristate "OMAP HDQ driver" + depends on ARCH_OMAP2430 || ARCH_OMAP34XX + help + Say Y here if you want support for the 1-wire or HDQ Interface + on an OMAP processor. + endmenu diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile index 1420b5bbdda8..bc4714a75f3a 100644 --- a/drivers/w1/masters/Makefile +++ b/drivers/w1/masters/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_W1_MASTER_DS2490) += ds2490.o obj-$(CONFIG_W1_MASTER_DS2482) += ds2482.o obj-$(CONFIG_W1_MASTER_DS1WM) += ds1wm.o obj-$(CONFIG_W1_MASTER_GPIO) += w1-gpio.o +obj-$(CONFIG_HDQ_MASTER_OMAP) += omap_hdq.o diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c new file mode 100644 index 000000000000..c973889110c8 --- /dev/null +++ b/drivers/w1/masters/omap_hdq.c @@ -0,0 +1,725 @@ +/* + * drivers/w1/masters/omap_hdq.c + * + * Copyright (C) 2007 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <asm/irq.h> +#include <mach/hardware.h> + +#include "../w1.h" +#include "../w1_int.h" + +#define MOD_NAME "OMAP_HDQ:" + +#define OMAP_HDQ_REVISION 0x00 +#define OMAP_HDQ_TX_DATA 0x04 +#define OMAP_HDQ_RX_DATA 0x08 +#define OMAP_HDQ_CTRL_STATUS 0x0c +#define OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK (1<<6) +#define OMAP_HDQ_CTRL_STATUS_CLOCKENABLE (1<<5) +#define OMAP_HDQ_CTRL_STATUS_GO (1<<4) +#define OMAP_HDQ_CTRL_STATUS_INITIALIZATION (1<<2) +#define OMAP_HDQ_CTRL_STATUS_DIR (1<<1) +#define OMAP_HDQ_CTRL_STATUS_MODE (1<<0) +#define OMAP_HDQ_INT_STATUS 0x10 +#define OMAP_HDQ_INT_STATUS_TXCOMPLETE (1<<2) +#define OMAP_HDQ_INT_STATUS_RXCOMPLETE (1<<1) +#define OMAP_HDQ_INT_STATUS_TIMEOUT (1<<0) +#define OMAP_HDQ_SYSCONFIG 0x14 +#define OMAP_HDQ_SYSCONFIG_SOFTRESET (1<<1) +#define OMAP_HDQ_SYSCONFIG_AUTOIDLE (1<<0) +#define OMAP_HDQ_SYSSTATUS 0x18 +#define OMAP_HDQ_SYSSTATUS_RESETDONE (1<<0) + +#define OMAP_HDQ_FLAG_CLEAR 0 +#define OMAP_HDQ_FLAG_SET 1 +#define OMAP_HDQ_TIMEOUT (HZ/5) + +#define OMAP_HDQ_MAX_USER 4 + +static DECLARE_WAIT_QUEUE_HEAD(hdq_wait_queue); +static int w1_id; + +struct hdq_data { + struct device *dev; + void __iomem *hdq_base; + /* lock status update */ + struct mutex hdq_mutex; + int hdq_usecount; + struct clk *hdq_ick; + struct clk *hdq_fck; + u8 hdq_irqstatus; + /* device lock */ + spinlock_t hdq_spinlock; + /* + * Used to control the call to omap_hdq_get and omap_hdq_put. + * HDQ Protocol: Write the CMD|REG_address first, followed by + * the data wrire or read. + */ + int init_trans; +}; + +static int __init omap_hdq_probe(struct platform_device *pdev); +static int omap_hdq_remove(struct platform_device *pdev); + +static struct platform_driver omap_hdq_driver = { + .probe = omap_hdq_probe, + .remove = omap_hdq_remove, + .driver = { + .name = "omap_hdq", + }, +}; + +static u8 omap_w1_read_byte(void *_hdq); +static void omap_w1_write_byte(void *_hdq, u8 byte); +static u8 omap_w1_reset_bus(void *_hdq); +static void omap_w1_search_bus(void *_hdq, struct w1_master *master_dev, + u8 search_type, w1_slave_found_callback slave_found); + + +static struct w1_bus_master omap_w1_master = { + .read_byte = omap_w1_read_byte, + .write_byte = omap_w1_write_byte, + .reset_bus = omap_w1_reset_bus, + .search = omap_w1_search_bus, +}; + +/* HDQ register I/O routines */ +static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset) +{ + return __raw_readb(hdq_data->hdq_base + offset); +} + +static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val) +{ + __raw_writeb(val, hdq_data->hdq_base + offset); +} + +static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset, + u8 val, u8 mask) +{ + u8 new_val = (__raw_readb(hdq_data->hdq_base + offset) & ~mask) + | (val & mask); + __raw_writeb(new_val, hdq_data->hdq_base + offset); + + return new_val; +} + +/* + * Wait for one or more bits in flag change. + * HDQ_FLAG_SET: wait until any bit in the flag is set. + * HDQ_FLAG_CLEAR: wait until all bits in the flag are cleared. + * return 0 on success and -ETIMEDOUT in the case of timeout. + */ +static int hdq_wait_for_flag(struct hdq_data *hdq_data, u32 offset, + u8 flag, u8 flag_set, u8 *status) +{ + int ret = 0; + unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT; + + if (flag_set == OMAP_HDQ_FLAG_CLEAR) { + /* wait for the flag clear */ + while (((*status = hdq_reg_in(hdq_data, offset)) & flag) + && time_before(jiffies, timeout)) { + schedule_timeout_uninterruptible(1); + } + if (*status & flag) + ret = -ETIMEDOUT; + } else if (flag_set == OMAP_HDQ_FLAG_SET) { + /* wait for the flag set */ + while (!((*status = hdq_reg_in(hdq_data, offset)) & flag) + && time_before(jiffies, timeout)) { + schedule_timeout_uninterruptible(1); + } + if (!(*status & flag)) + ret = -ETIMEDOUT; + } else + return -EINVAL; + + return ret; +} + +/* write out a byte and fill *status with HDQ_INT_STATUS */ +static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status) +{ + int ret; + u8 tmp_status; + unsigned long irqflags; + + *status = 0; + + spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); + /* clear interrupt flags via a dummy read */ + hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + /* ISR loads it with new INT_STATUS */ + hdq_data->hdq_irqstatus = 0; + spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); + + hdq_reg_out(hdq_data, OMAP_HDQ_TX_DATA, val); + + /* set the GO bit */ + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO); + /* wait for the TXCOMPLETE bit */ + ret = wait_event_timeout(hdq_wait_queue, + hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT); + if (ret == 0) { + dev_dbg(hdq_data->dev, "TX wait elapsed\n"); + goto out; + } + + *status = hdq_data->hdq_irqstatus; + /* check irqstatus */ + if (!(*status & OMAP_HDQ_INT_STATUS_TXCOMPLETE)) { + dev_dbg(hdq_data->dev, "timeout waiting for" + "TXCOMPLETE/RXCOMPLETE, %x", *status); + ret = -ETIMEDOUT; + goto out; + } + + /* wait for the GO bit return to zero */ + ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_FLAG_CLEAR, &tmp_status); + if (ret) { + dev_dbg(hdq_data->dev, "timeout waiting GO bit" + "return to zero, %x", tmp_status); + } + +out: + return ret; +} + +/* HDQ Interrupt service routine */ +static irqreturn_t hdq_isr(int irq, void *_hdq) +{ + struct hdq_data *hdq_data = _hdq; + unsigned long irqflags; + + spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); + hdq_data->hdq_irqstatus = hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); + dev_dbg(hdq_data->dev, "hdq_isr: %x", hdq_data->hdq_irqstatus); + + if (hdq_data->hdq_irqstatus & + (OMAP_HDQ_INT_STATUS_TXCOMPLETE | OMAP_HDQ_INT_STATUS_RXCOMPLETE + | OMAP_HDQ_INT_STATUS_TIMEOUT)) { + /* wake up sleeping process */ + wake_up(&hdq_wait_queue); + } + + return IRQ_HANDLED; +} + +/* HDQ Mode: always return success */ +static u8 omap_w1_reset_bus(void *_hdq) +{ + return 0; +} + +/* W1 search callback function */ +static void omap_w1_search_bus(void *_hdq, struct w1_master *master_dev, + u8 search_type, w1_slave_found_callback slave_found) +{ + u64 module_id, rn_le, cs, id; + + if (w1_id) + module_id = w1_id; + else + module_id = 0x1; + + rn_le = cpu_to_le64(module_id); + /* + * HDQ might not obey truly the 1-wire spec. + * So calculate CRC based on module parameter. + */ + cs = w1_calc_crc8((u8 *)&rn_le, 7); + id = (cs << 56) | module_id; + + slave_found(master_dev, id); +} + +static int _omap_hdq_reset(struct hdq_data *hdq_data) +{ + int ret; + u8 tmp_status; + + hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, OMAP_HDQ_SYSCONFIG_SOFTRESET); + /* + * Select HDQ mode & enable clocks. + * It is observed that INT flags can't be cleared via a read and GO/INIT + * won't return to zero if interrupt is disabled. So we always enable + * interrupt. + */ + hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | + OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); + + /* wait for reset to complete */ + ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_SYSSTATUS, + OMAP_HDQ_SYSSTATUS_RESETDONE, OMAP_HDQ_FLAG_SET, &tmp_status); + if (ret) + dev_dbg(hdq_data->dev, "timeout waiting HDQ reset, %x", + tmp_status); + else { + hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | + OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); + hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, + OMAP_HDQ_SYSCONFIG_AUTOIDLE); + } + + return ret; +} + +/* Issue break pulse to the device */ +static int omap_hdq_break(struct hdq_data *hdq_data) +{ + int ret = 0; + u8 tmp_status; + unsigned long irqflags; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + ret = -EINTR; + goto rtn; + } + + spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); + /* clear interrupt flags via a dummy read */ + hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + /* ISR loads it with new INT_STATUS */ + hdq_data->hdq_irqstatus = 0; + spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); + + /* set the INIT and GO bit */ + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_INITIALIZATION | OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_INITIALIZATION | + OMAP_HDQ_CTRL_STATUS_GO); + + /* wait for the TIMEOUT bit */ + ret = wait_event_timeout(hdq_wait_queue, + hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT); + if (ret == 0) { + dev_dbg(hdq_data->dev, "break wait elapsed\n"); + ret = -EINTR; + goto out; + } + + tmp_status = hdq_data->hdq_irqstatus; + /* check irqstatus */ + if (!(tmp_status & OMAP_HDQ_INT_STATUS_TIMEOUT)) { + dev_dbg(hdq_data->dev, "timeout waiting for TIMEOUT, %x", + tmp_status); + ret = -ETIMEDOUT; + goto out; + } + /* + * wait for both INIT and GO bits rerurn to zero. + * zero wait time expected for interrupt mode. + */ + ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_INITIALIZATION | + OMAP_HDQ_CTRL_STATUS_GO, OMAP_HDQ_FLAG_CLEAR, + &tmp_status); + if (ret) + dev_dbg(hdq_data->dev, "timeout waiting INIT&GO bits" + "return to zero, %x", tmp_status); + +out: + mutex_unlock(&hdq_data->hdq_mutex); +rtn: + return ret; +} + +static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val) +{ + int ret = 0; + u8 status; + unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + ret = -EINTR; + goto rtn; + } + + if (!hdq_data->hdq_usecount) { + ret = -EINVAL; + goto out; + } + + if (!(hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) { + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO); + /* + * The RX comes immediately after TX. It + * triggers another interrupt before we + * sleep. So we have to wait for RXCOMPLETE bit. + */ + while (!(hdq_data->hdq_irqstatus + & OMAP_HDQ_INT_STATUS_RXCOMPLETE) + && time_before(jiffies, timeout)) { + schedule_timeout_uninterruptible(1); + } + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 0, + OMAP_HDQ_CTRL_STATUS_DIR); + status = hdq_data->hdq_irqstatus; + /* check irqstatus */ + if (!(status & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) { + dev_dbg(hdq_data->dev, "timeout waiting for" + "RXCOMPLETE, %x", status); + ret = -ETIMEDOUT; + goto out; + } + } + /* the data is ready. Read it in! */ + *val = hdq_reg_in(hdq_data, OMAP_HDQ_RX_DATA); +out: + mutex_unlock(&hdq_data->hdq_mutex); +rtn: + return 0; + +} + +/* Enable clocks and set the controller to HDQ mode */ +static int omap_hdq_get(struct hdq_data *hdq_data) +{ + int ret = 0; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + ret = -EINTR; + goto rtn; + } + + if (OMAP_HDQ_MAX_USER == hdq_data->hdq_usecount) { + dev_dbg(hdq_data->dev, "attempt to exceed the max use count"); + ret = -EINVAL; + goto out; + } else { + hdq_data->hdq_usecount++; + try_module_get(THIS_MODULE); + if (1 == hdq_data->hdq_usecount) { + if (clk_enable(hdq_data->hdq_ick)) { + dev_dbg(hdq_data->dev, "Can not enable ick\n"); + ret = -ENODEV; + goto clk_err; + } + if (clk_enable(hdq_data->hdq_fck)) { + dev_dbg(hdq_data->dev, "Can not enable fck\n"); + clk_disable(hdq_data->hdq_ick); + ret = -ENODEV; + goto clk_err; + } + + /* make sure HDQ is out of reset */ + if (!(hdq_reg_in(hdq_data, OMAP_HDQ_SYSSTATUS) & + OMAP_HDQ_SYSSTATUS_RESETDONE)) { + ret = _omap_hdq_reset(hdq_data); + if (ret) + /* back up the count */ + hdq_data->hdq_usecount--; + } else { + /* select HDQ mode & enable clocks */ + hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | + OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); + hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, + OMAP_HDQ_SYSCONFIG_AUTOIDLE); + hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + } + } + } + +clk_err: + clk_put(hdq_data->hdq_ick); + clk_put(hdq_data->hdq_fck); +out: + mutex_unlock(&hdq_data->hdq_mutex); +rtn: + return ret; +} + +/* Disable clocks to the module */ +static int omap_hdq_put(struct hdq_data *hdq_data) +{ + int ret = 0; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) + return -EINTR; + + if (0 == hdq_data->hdq_usecount) { + dev_dbg(hdq_data->dev, "attempt to decrement use count" + "when it is zero"); + ret = -EINVAL; + } else { + hdq_data->hdq_usecount--; + module_put(THIS_MODULE); + if (0 == hdq_data->hdq_usecount) { + clk_disable(hdq_data->hdq_ick); + clk_disable(hdq_data->hdq_fck); + } + } + mutex_unlock(&hdq_data->hdq_mutex); + + return ret; +} + +/* Read a byte of data from the device */ +static u8 omap_w1_read_byte(void *_hdq) +{ + struct hdq_data *hdq_data = _hdq; + u8 val = 0; + int ret; + + ret = hdq_read_byte(hdq_data, &val); + if (ret) { + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return -EINTR; + } + hdq_data->init_trans = 0; + mutex_unlock(&hdq_data->hdq_mutex); + omap_hdq_put(hdq_data); + return -1; + } + + /* Write followed by a read, release the module */ + if (hdq_data->init_trans) { + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return -EINTR; + } + hdq_data->init_trans = 0; + mutex_unlock(&hdq_data->hdq_mutex); + omap_hdq_put(hdq_data); + } + + return val; +} + +/* Write a byte of data to the device */ +static void omap_w1_write_byte(void *_hdq, u8 byte) +{ + struct hdq_data *hdq_data = _hdq; + int ret; + u8 status; + + /* First write to initialize the transfer */ + if (hdq_data->init_trans == 0) + omap_hdq_get(hdq_data); + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return; + } + hdq_data->init_trans++; + mutex_unlock(&hdq_data->hdq_mutex); + + ret = hdq_write_byte(hdq_data, byte, &status); + if (ret == 0) { + dev_dbg(hdq_data->dev, "TX failure:Ctrl status %x\n", status); + return; + } + + /* Second write, data transfered. Release the module */ + if (hdq_data->init_trans > 1) { + omap_hdq_put(hdq_data); + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return; + } + hdq_data->init_trans = 0; + mutex_unlock(&hdq_data->hdq_mutex); + } + + return; +} + +static int __init omap_hdq_probe(struct platform_device *pdev) +{ + struct hdq_data *hdq_data; + struct resource *res; + int ret, irq; + u8 rev; + + hdq_data = kmalloc(sizeof(*hdq_data), GFP_KERNEL); + if (!hdq_data) { + dev_dbg(&pdev->dev, "unable to allocate memory\n"); + ret = -ENOMEM; + goto err_kmalloc; + } + + hdq_data->dev = &pdev->dev; + platform_set_drvdata(pdev, hdq_data); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_dbg(&pdev->dev, "unable to get resource\n"); + ret = -ENXIO; + goto err_resource; + } + + hdq_data->hdq_base = ioremap(res->start, SZ_4K); + if (!hdq_data->hdq_base) { + dev_dbg(&pdev->dev, "ioremap failed\n"); + ret = -EINVAL; + goto err_ioremap; + } + + /* get interface & functional clock objects */ + hdq_data->hdq_ick = clk_get(&pdev->dev, "hdq_ick"); + hdq_data->hdq_fck = clk_get(&pdev->dev, "hdq_fck"); + + if (IS_ERR(hdq_data->hdq_ick) || IS_ERR(hdq_data->hdq_fck)) { + dev_dbg(&pdev->dev, "Can't get HDQ clock objects\n"); + if (IS_ERR(hdq_data->hdq_ick)) { + ret = PTR_ERR(hdq_data->hdq_ick); + goto err_clk; + } + if (IS_ERR(hdq_data->hdq_fck)) { + ret = PTR_ERR(hdq_data->hdq_fck); + clk_put(hdq_data->hdq_ick); + goto err_clk; + } + } + + hdq_data->hdq_usecount = 0; + mutex_init(&hdq_data->hdq_mutex); + + if (clk_enable(hdq_data->hdq_ick)) { + dev_dbg(&pdev->dev, "Can not enable ick\n"); + ret = -ENODEV; + goto err_intfclk; + } + + if (clk_enable(hdq_data->hdq_fck)) { + dev_dbg(&pdev->dev, "Can not enable fck\n"); + ret = -ENODEV; + goto err_fnclk; + } + + rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION); + dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n", + (rev >> 4) + '0', (rev & 0x0f) + '0', "Interrupt"); + + spin_lock_init(&hdq_data->hdq_spinlock); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = -ENXIO; + goto err_irq; + } + + ret = request_irq(irq, hdq_isr, IRQF_DISABLED, "omap_hdq", hdq_data); + if (ret < 0) { + dev_dbg(&pdev->dev, "could not request irq\n"); + goto err_irq; + } + + omap_hdq_break(hdq_data); + + /* don't clock the HDQ until it is needed */ + clk_disable(hdq_data->hdq_ick); + clk_disable(hdq_data->hdq_fck); + + omap_w1_master.data = hdq_data; + + ret = w1_add_master_device(&omap_w1_master); + if (ret) { + dev_dbg(&pdev->dev, "Failure in registering w1 master\n"); + goto err_w1; + } + + return 0; + +err_w1: +err_irq: + clk_disable(hdq_data->hdq_fck); + +err_fnclk: + clk_disable(hdq_data->hdq_ick); + +err_intfclk: + clk_put(hdq_data->hdq_ick); + clk_put(hdq_data->hdq_fck); + +err_clk: + iounmap(hdq_data->hdq_base); + +err_ioremap: +err_resource: + platform_set_drvdata(pdev, NULL); + kfree(hdq_data); + +err_kmalloc: + return ret; + +} + +static int omap_hdq_remove(struct platform_device *pdev) +{ + struct hdq_data *hdq_data = platform_get_drvdata(pdev); + + mutex_lock(&hdq_data->hdq_mutex); + + if (hdq_data->hdq_usecount) { + dev_dbg(&pdev->dev, "removed when use count is not zero\n"); + return -EBUSY; + } + + mutex_unlock(&hdq_data->hdq_mutex); + + /* remove module dependency */ + clk_put(hdq_data->hdq_ick); + clk_put(hdq_data->hdq_fck); + free_irq(INT_24XX_HDQ_IRQ, hdq_data); + platform_set_drvdata(pdev, NULL); + iounmap(hdq_data->hdq_base); + kfree(hdq_data); + + return 0; +} + +static int __init +omap_hdq_init(void) +{ + return platform_driver_register(&omap_hdq_driver); +} +module_init(omap_hdq_init); + +static void __exit +omap_hdq_exit(void) +{ + platform_driver_unregister(&omap_hdq_driver); +} +module_exit(omap_hdq_exit); + +module_param(w1_id, int, S_IRUSR); +MODULE_PARM_DESC(w1_id, "1-wire id for the slave detection"); + +MODULE_AUTHOR("Texas Instruments"); +MODULE_DESCRIPTION("HDQ driver Library"); +MODULE_LICENSE("GPL"); diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig index 3df29a122f84..8d0b1fb1e52e 100644 --- a/drivers/w1/slaves/Kconfig +++ b/drivers/w1/slaves/Kconfig @@ -44,4 +44,11 @@ config W1_SLAVE_DS2760 If you are unsure, say N. +config W1_SLAVE_BQ27000 + tristate "BQ27000 slave support" + depends on W1 + help + Say Y here if you want to use a hdq + bq27000 slave support. + endmenu diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile index a8eb7524df1d..990f400b6d22 100644 --- a/drivers/w1/slaves/Makefile +++ b/drivers/w1/slaves/Makefile @@ -6,4 +6,4 @@ obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o - +obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o diff --git a/drivers/w1/slaves/w1_bq27000.c b/drivers/w1/slaves/w1_bq27000.c new file mode 100644 index 000000000000..8f4c91f6c680 --- /dev/null +++ b/drivers/w1/slaves/w1_bq27000.c @@ -0,0 +1,123 @@ +/* + * drivers/w1/slaves/w1_bq27000.c + * + * Copyright (C) 2007 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> + +#include "../w1.h" +#include "../w1_int.h" +#include "../w1_family.h" + +#define HDQ_CMD_READ (0) +#define HDQ_CMD_WRITE (1<<7) + +static int F_ID; + +void w1_bq27000_write(struct device *dev, u8 buf, u8 reg) +{ + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + + if (!dev) { + pr_info("Could not obtain slave dev ptr\n"); + return; + } + + w1_write_8(sl->master, HDQ_CMD_WRITE | reg); + w1_write_8(sl->master, buf); +} +EXPORT_SYMBOL(w1_bq27000_write); + +int w1_bq27000_read(struct device *dev, u8 reg) +{ + u8 val; + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + + if (!dev) + return 0; + + w1_write_8(sl->master, HDQ_CMD_READ | reg); + val = w1_read_8(sl->master); + + return val; +} +EXPORT_SYMBOL(w1_bq27000_read); + +static int w1_bq27000_add_slave(struct w1_slave *sl) +{ + int ret; + int id = 1; + struct platform_device *pdev; + + pdev = platform_device_alloc("bq27000-battery", id); + if (!pdev) { + ret = -ENOMEM; + return ret; + } + pdev->dev.parent = &sl->dev; + + ret = platform_device_add(pdev); + if (ret) + goto pdev_add_failed; + + dev_set_drvdata(&sl->dev, pdev); + + goto success; + +pdev_add_failed: + platform_device_unregister(pdev); +success: + return ret; +} + +static void w1_bq27000_remove_slave(struct w1_slave *sl) +{ + struct platform_device *pdev = dev_get_drvdata(&sl->dev); + + platform_device_unregister(pdev); +} + +static struct w1_family_ops w1_bq27000_fops = { + .add_slave = w1_bq27000_add_slave, + .remove_slave = w1_bq27000_remove_slave, +}; + +static struct w1_family w1_bq27000_family = { + .fid = 1, + .fops = &w1_bq27000_fops, +}; + +static int __init w1_bq27000_init(void) +{ + if (F_ID) + w1_bq27000_family.fid = F_ID; + + return w1_register_family(&w1_bq27000_family); +} + +static void __exit w1_bq27000_exit(void) +{ + w1_unregister_family(&w1_bq27000_family); +} + + +module_init(w1_bq27000_init); +module_exit(w1_bq27000_exit); + +module_param(F_ID, int, S_IRUSR); +MODULE_PARM_DESC(F_ID, "1-wire slave FID for BQ device"); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments Ltd"); +MODULE_DESCRIPTION("HDQ/1-wire slave driver bq27000 battery monitor chip"); diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h index cdaa6fffbfc7..97304bd83ec9 100644 --- a/drivers/w1/w1.h +++ b/drivers/w1/w1.h @@ -206,6 +206,7 @@ void w1_slave_detach(struct w1_slave *sl); u8 w1_triplet(struct w1_master *dev, int bdir); void w1_write_8(struct w1_master *, u8); +u8 w1_read_8(struct w1_master *); int w1_reset_bus(struct w1_master *); u8 w1_calc_crc8(u8 *, int); void w1_write_block(struct w1_master *, const u8 *, int); diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c index f4f82f1f486e..0d15b0eaf79a 100644 --- a/drivers/w1/w1_io.c +++ b/drivers/w1/w1_io.c @@ -217,7 +217,7 @@ u8 w1_triplet(struct w1_master *dev, int bdir) * @param dev the master device * @return the byte read */ -static u8 w1_read_8(struct w1_master * dev) +u8 w1_read_8(struct w1_master *dev) { int i; u8 res = 0; @@ -230,6 +230,7 @@ static u8 w1_read_8(struct w1_master * dev) return res; } +EXPORT_SYMBOL_GPL(w1_read_8); /** * Writes a series of bytes. diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index c3b78a76f173..225398fd5049 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -42,8 +42,10 @@ u32 booke_wdt_period = WDT_PERIOD_DEFAULT; #ifdef CONFIG_FSL_BOOKE #define WDTP(x) ((((63-x)&0x3)<<30)|(((63-x)&0x3c)<<15)) +#define WDTP_MASK (WDTP(0)) #else #define WDTP(x) (TCR_WP(x)) +#define WDTP_MASK (TCR_WP_MASK) #endif static DEFINE_SPINLOCK(booke_wdt_lock); @@ -65,6 +67,7 @@ static void __booke_wdt_enable(void *data) /* clear status before enabling watchdog */ __booke_wdt_ping(NULL); val = mfspr(SPRN_TCR); + val &= ~WDTP_MASK; val |= (TCR_WIE|TCR_WRC(WRC_CHIP)|WDTP(booke_wdt_period)); mtspr(SPRN_TCR, val); @@ -114,7 +117,7 @@ static long booke_wdt_ioctl(struct file *file, case WDIOC_SETTIMEOUT: if (get_user(booke_wdt_period, p)) return -EFAULT; - mtspr(SPRN_TCR, (mfspr(SPRN_TCR) & ~WDTP(0)) | + mtspr(SPRN_TCR, (mfspr(SPRN_TCR) & ~WDTP_MASK) | WDTP(booke_wdt_period)); return 0; case WDIOC_GETTIMEOUT: diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index a3765e0be4a8..763c1ea5dce5 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -40,6 +40,7 @@ #include <linux/bootmem.h> #include <linux/slab.h> #include <asm/desc.h> +#include <asm/cacheflush.h> #define PCI_BIOS32_SD_VALUE 0x5F32335F /* "_32_" */ #define CRU_BIOS_SIGNATURE_VALUE 0x55524324 @@ -394,6 +395,8 @@ static void __devinit dmi_find_cru(const struct dmi_header *dm) smbios_cru64_ptr->double_offset; cru_rom_addr = ioremap(cru_physical_address, smbios_cru64_ptr->double_length); + set_memory_x((unsigned long)cru_rom_addr & PAGE_MASK, + smbios_cru64_ptr->double_length >> PAGE_SHIFT); } } } @@ -482,7 +485,7 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason, "Management Log for details.\n"); } - return NOTIFY_STOP; + return NOTIFY_OK; } /* diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c index ca344a85eb95..2474ebca88f6 100644 --- a/drivers/watchdog/iTCO_vendor_support.c +++ b/drivers/watchdog/iTCO_vendor_support.c @@ -1,7 +1,7 @@ /* * intel TCO vendor specific watchdog driver support * - * (c) Copyright 2006 Wim Van Sebroeck <wim@iguana.be>. + * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -19,8 +19,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_vendor_support" -#define DRV_VERSION "1.01" -#define DRV_RELDATE "11-Nov-2006" +#define DRV_VERSION "1.02" #define PFX DRV_NAME ": " /* Includes */ @@ -78,24 +77,6 @@ MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (n * 20.6 seconds. */ -static void supermicro_old_pre_start(unsigned long acpibase) -{ - unsigned long val32; - - val32 = inl(SMI_EN); - val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ - outl(val32, SMI_EN); /* Needed to activate watchdog */ -} - -static void supermicro_old_pre_stop(unsigned long acpibase) -{ - unsigned long val32; - - val32 = inl(SMI_EN); - val32 &= 0x00002000; /* Turn on SMI clearing watchdog */ - outl(val32, SMI_EN); /* Needed to deactivate watchdog */ -} - static void supermicro_old_pre_keepalive(unsigned long acpibase) { /* Reload TCO Timer (done in iTCO_wdt_keepalive) + */ @@ -247,18 +228,14 @@ static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat) void iTCO_vendor_pre_start(unsigned long acpibase, unsigned int heartbeat) { - if (vendorsupport == SUPERMICRO_OLD_BOARD) - supermicro_old_pre_start(acpibase); - else if (vendorsupport == SUPERMICRO_NEW_BOARD) + if (vendorsupport == SUPERMICRO_NEW_BOARD) supermicro_new_pre_start(heartbeat); } EXPORT_SYMBOL(iTCO_vendor_pre_start); void iTCO_vendor_pre_stop(unsigned long acpibase) { - if (vendorsupport == SUPERMICRO_OLD_BOARD) - supermicro_old_pre_stop(acpibase); - else if (vendorsupport == SUPERMICRO_NEW_BOARD) + if (vendorsupport == SUPERMICRO_NEW_BOARD) supermicro_new_pre_stop(); } EXPORT_SYMBOL(iTCO_vendor_pre_stop); diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index bfb93bc2ca9f..5b395a4ddfdf 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -1,7 +1,7 @@ /* * intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets) * - * (c) Copyright 2006-2007 Wim Van Sebroeck <wim@iguana.be>. + * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -20,34 +20,41 @@ * 82801BAM (ICH2-M) : document number 290687-002, 298242-027, * 82801CA (ICH3-S) : document number 290733-003, 290739-013, * 82801CAM (ICH3-M) : document number 290716-001, 290718-007, - * 82801DB (ICH4) : document number 290744-001, 290745-020, - * 82801DBM (ICH4-M) : document number 252337-001, 252663-005, + * 82801DB (ICH4) : document number 290744-001, 290745-025, + * 82801DBM (ICH4-M) : document number 252337-001, 252663-008, * 82801E (C-ICH) : document number 273599-001, 273645-002, - * 82801EB (ICH5) : document number 252516-001, 252517-003, - * 82801ER (ICH5R) : document number 252516-001, 252517-003, - * 82801FB (ICH6) : document number 301473-002, 301474-007, - * 82801FR (ICH6R) : document number 301473-002, 301474-007, - * 82801FBM (ICH6-M) : document number 301473-002, 301474-007, - * 82801FW (ICH6W) : document number 301473-001, 301474-007, - * 82801FRW (ICH6RW) : document number 301473-001, 301474-007, - * 82801GB (ICH7) : document number 307013-002, 307014-009, - * 82801GR (ICH7R) : document number 307013-002, 307014-009, - * 82801GDH (ICH7DH) : document number 307013-002, 307014-009, - * 82801GBM (ICH7-M) : document number 307013-002, 307014-009, - * 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009, - * 82801HB (ICH8) : document number 313056-003, 313057-009, - * 82801HR (ICH8R) : document number 313056-003, 313057-009, - * 82801HBM (ICH8M) : document number 313056-003, 313057-009, - * 82801HH (ICH8DH) : document number 313056-003, 313057-009, - * 82801HO (ICH8DO) : document number 313056-003, 313057-009, - * 82801HEM (ICH8M-E) : document number 313056-003, 313057-009, - * 82801IB (ICH9) : document number 316972-001, 316973-006, - * 82801IR (ICH9R) : document number 316972-001, 316973-006, - * 82801IH (ICH9DH) : document number 316972-001, 316973-006, - * 82801IO (ICH9DO) : document number 316972-001, 316973-006, - * 6300ESB (6300ESB) : document number 300641-003, 300884-010, - * 631xESB (631xESB) : document number 313082-001, 313075-005, - * 632xESB (632xESB) : document number 313082-001, 313075-005 + * 82801EB (ICH5) : document number 252516-001, 252517-028, + * 82801ER (ICH5R) : document number 252516-001, 252517-028, + * 6300ESB (6300ESB) : document number 300641-004, 300884-013, + * 82801FB (ICH6) : document number 301473-002, 301474-026, + * 82801FR (ICH6R) : document number 301473-002, 301474-026, + * 82801FBM (ICH6-M) : document number 301473-002, 301474-026, + * 82801FW (ICH6W) : document number 301473-001, 301474-026, + * 82801FRW (ICH6RW) : document number 301473-001, 301474-026, + * 631xESB (631xESB) : document number 313082-001, 313075-006, + * 632xESB (632xESB) : document number 313082-001, 313075-006, + * 82801GB (ICH7) : document number 307013-003, 307014-024, + * 82801GR (ICH7R) : document number 307013-003, 307014-024, + * 82801GDH (ICH7DH) : document number 307013-003, 307014-024, + * 82801GBM (ICH7-M) : document number 307013-003, 307014-024, + * 82801GHM (ICH7-M DH) : document number 307013-003, 307014-024, + * 82801GU (ICH7-U) : document number 307013-003, 307014-024, + * 82801HB (ICH8) : document number 313056-003, 313057-017, + * 82801HR (ICH8R) : document number 313056-003, 313057-017, + * 82801HBM (ICH8M) : document number 313056-003, 313057-017, + * 82801HH (ICH8DH) : document number 313056-003, 313057-017, + * 82801HO (ICH8DO) : document number 313056-003, 313057-017, + * 82801HEM (ICH8M-E) : document number 313056-003, 313057-017, + * 82801IB (ICH9) : document number 316972-004, 316973-012, + * 82801IR (ICH9R) : document number 316972-004, 316973-012, + * 82801IH (ICH9DH) : document number 316972-004, 316973-012, + * 82801IO (ICH9DO) : document number 316972-004, 316973-012, + * 82801IBM (ICH9M) : document number 316972-004, 316973-012, + * 82801IEM (ICH9M-E) : document number 316972-004, 316973-012, + * 82801JIB (ICH10) : document number 319973-002, 319974-002, + * 82801JIR (ICH10R) : document number 319973-002, 319974-002, + * 82801JD (ICH10D) : document number 319973-002, 319974-002, + * 82801JDO (ICH10DO) : document number 319973-002, 319974-002 */ /* @@ -56,8 +63,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_wdt" -#define DRV_VERSION "1.03" -#define DRV_RELDATE "30-Apr-2008" +#define DRV_VERSION "1.04" #define PFX DRV_NAME ": " /* Includes */ @@ -96,19 +102,26 @@ enum iTCO_chipsets { TCO_ICH6, /* ICH6 & ICH6R */ TCO_ICH6M, /* ICH6-M */ TCO_ICH6W, /* ICH6W & ICH6RW */ + TCO_631XESB, /* 631xESB/632xESB */ TCO_ICH7, /* ICH7 & ICH7R */ - TCO_ICH7M, /* ICH7-M */ + TCO_ICH7DH, /* ICH7DH */ + TCO_ICH7M, /* ICH7-M & ICH7-U */ TCO_ICH7MDH, /* ICH7-M DH */ TCO_ICH8, /* ICH8 & ICH8R */ - TCO_ICH8ME, /* ICH8M-E */ TCO_ICH8DH, /* ICH8DH */ TCO_ICH8DO, /* ICH8DO */ TCO_ICH8M, /* ICH8M */ + TCO_ICH8ME, /* ICH8M-E */ TCO_ICH9, /* ICH9 */ TCO_ICH9R, /* ICH9R */ TCO_ICH9DH, /* ICH9DH */ TCO_ICH9DO, /* ICH9DO */ - TCO_631XESB, /* 631xESB/632xESB */ + TCO_ICH9M, /* ICH9M */ + TCO_ICH9ME, /* ICH9M-E */ + TCO_ICH10, /* ICH10 */ + TCO_ICH10R, /* ICH10R */ + TCO_ICH10D, /* ICH10D */ + TCO_ICH10DO, /* ICH10DO */ }; static struct { @@ -129,19 +142,26 @@ static struct { {"ICH6 or ICH6R", 2}, {"ICH6-M", 2}, {"ICH6W or ICH6RW", 2}, + {"631xESB/632xESB", 2}, {"ICH7 or ICH7R", 2}, - {"ICH7-M", 2}, + {"ICH7DH", 2}, + {"ICH7-M or ICH7-U", 2}, {"ICH7-M DH", 2}, {"ICH8 or ICH8R", 2}, - {"ICH8M-E", 2}, {"ICH8DH", 2}, {"ICH8DO", 2}, {"ICH8M", 2}, + {"ICH8M-E", 2}, {"ICH9", 2}, {"ICH9R", 2}, {"ICH9DH", 2}, {"ICH9DO", 2}, - {"631xESB/632xESB", 2}, + {"ICH9M", 2}, + {"ICH9M-E", 2}, + {"ICH10", 2}, + {"ICH10R", 2}, + {"ICH10D", 2}, + {"ICH10DO", 2}, {NULL, 0} }; @@ -175,18 +195,6 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0, TCO_ICH6)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1, TCO_ICH6M)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2, TCO_ICH6W)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M)}, - { ITCO_PCI_DEVICE(0x2918, TCO_ICH9)}, - { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2671, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2672, TCO_631XESB)}, @@ -203,6 +211,25 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { ITCO_PCI_DEVICE(0x267d, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x267e, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x267f, TCO_631XESB)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_30, TCO_ICH7DH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME)}, + { ITCO_PCI_DEVICE(0x2918, TCO_ICH9)}, + { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO)}, + { ITCO_PCI_DEVICE(0x2919, TCO_ICH9M)}, + { ITCO_PCI_DEVICE(0x2917, TCO_ICH9ME)}, + { ITCO_PCI_DEVICE(0x3a18, TCO_ICH10)}, + { ITCO_PCI_DEVICE(0x3a16, TCO_ICH10R)}, + { ITCO_PCI_DEVICE(0x3a1a, TCO_ICH10D)}, + { ITCO_PCI_DEVICE(0x3a14, TCO_ICH10DO)}, { 0, }, /* End of list */ }; MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl); @@ -311,6 +338,7 @@ static int iTCO_wdt_unset_NO_REBOOT_bit(void) static int iTCO_wdt_start(void) { unsigned int val; + unsigned long val32; spin_lock(&iTCO_wdt_private.io_lock); @@ -323,6 +351,18 @@ static int iTCO_wdt_start(void) return -EIO; } + /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */ + val32 = inl(SMI_EN); + val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ + outl(val32, SMI_EN); + + /* Force the timer to its reload value by writing to the TCO_RLD + register */ + if (iTCO_wdt_private.iTCO_version == 2) + outw(0x01, TCO_RLD); + else if (iTCO_wdt_private.iTCO_version == 1) + outb(0x01, TCO_RLD); + /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */ val = inw(TCO1_CNT); val &= 0xf7ff; @@ -338,6 +378,7 @@ static int iTCO_wdt_start(void) static int iTCO_wdt_stop(void) { unsigned int val; + unsigned long val32; spin_lock(&iTCO_wdt_private.io_lock); @@ -349,6 +390,11 @@ static int iTCO_wdt_stop(void) outw(val, TCO1_CNT); val = inw(TCO1_CNT); + /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */ + val32 = inl(SMI_EN); + val32 |= 0x00002000; + outl(val32, SMI_EN); + /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ iTCO_wdt_set_NO_REBOOT_bit(); @@ -459,7 +505,6 @@ static int iTCO_wdt_open(struct inode *inode, struct file *file) /* * Reload and activate timer */ - iTCO_wdt_keepalive(); iTCO_wdt_start(); return nonseekable_open(inode, file); } @@ -604,7 +649,6 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, int ret; u32 base_address; unsigned long RCBA; - unsigned long val32; /* * Find the ACPI/PM base I/O address which is the base @@ -644,17 +688,13 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ iTCO_wdt_set_NO_REBOOT_bit(); - /* Set the TCO_EN bit in SMI_EN register */ + /* The TCO logic uses the TCO_EN bit in the SMI_EN register */ if (!request_region(SMI_EN, 4, "iTCO_wdt")) { printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n", SMI_EN); ret = -EIO; goto out; } - val32 = inl(SMI_EN); - val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ - outl(val32, SMI_EN); - release_region(SMI_EN, 4); /* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */ @@ -662,7 +702,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n", TCOBASE); ret = -EIO; - goto out; + goto unreg_smi_en; } printk(KERN_INFO PFX @@ -672,8 +712,9 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, TCOBASE); /* Clear out the (probably old) status */ - outb(0, TCO1_STS); - outb(3, TCO2_STS); + outb(8, TCO1_STS); /* Clear the Time Out Status bit */ + outb(2, TCO2_STS); /* Clear SECOND_TO_STS bit */ + outb(4, TCO2_STS); /* Clear BOOT_STS bit */ /* Make sure the watchdog is not running */ iTCO_wdt_stop(); @@ -701,6 +742,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, unreg_region: release_region(TCOBASE, 0x20); +unreg_smi_en: + release_region(SMI_EN, 4); out: if (iTCO_wdt_private.iTCO_version == 2) iounmap(iTCO_wdt_private.gcs); @@ -718,6 +761,7 @@ static void __devexit iTCO_wdt_cleanup(void) /* Deregister */ misc_deregister(&iTCO_wdt_miscdev); release_region(TCOBASE, 0x20); + release_region(SMI_EN, 4); if (iTCO_wdt_private.iTCO_version == 2) iounmap(iTCO_wdt_private.gcs); pci_dev_put(iTCO_wdt_private.pdev); @@ -782,8 +826,8 @@ static int __init iTCO_wdt_init_module(void) { int err; - printk(KERN_INFO PFX "Intel TCO WatchDog Timer Driver v%s (%s)\n", - DRV_VERSION, DRV_RELDATE); + printk(KERN_INFO PFX "Intel TCO WatchDog Timer Driver v%s\n", + DRV_VERSION); err = platform_driver_register(&iTCO_wdt_driver); if (err) diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c index b4b7b0a4c119..3acce623f209 100644 --- a/drivers/watchdog/mtx-1_wdt.c +++ b/drivers/watchdog/mtx-1_wdt.c @@ -98,6 +98,8 @@ static void mtx1_wdt_reset(void) static void mtx1_wdt_start(void) { + unsigned long flags; + spin_lock_irqsave(&mtx1_wdt_device.lock, flags); if (!mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 1; @@ -110,6 +112,8 @@ static void mtx1_wdt_start(void) static int mtx1_wdt_stop(void) { + unsigned long flags; + spin_lock_irqsave(&mtx1_wdt_device.lock, flags); if (mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 0; diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index a0fb5eac407c..8dc7109d61b7 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -44,13 +44,15 @@ #include <linux/list.h> #include <linux/sysdev.h> -#include <asm/xen/hypervisor.h> #include <asm/page.h> #include <asm/pgalloc.h> #include <asm/pgtable.h> #include <asm/uaccess.h> #include <asm/tlb.h> +#include <asm/xen/hypervisor.h> +#include <asm/xen/hypercall.h> +#include <xen/interface/xen.h> #include <xen/interface/memory.h> #include <xen/xenbus.h> #include <xen/features.h> @@ -122,14 +124,7 @@ static struct timer_list balloon_timer; static void scrub_page(struct page *page) { #ifdef CONFIG_XEN_SCRUB_PAGES - if (PageHighMem(page)) { - void *v = kmap(page); - clear_page(v); - kunmap(v); - } else { - void *v = page_address(page); - clear_page(v); - } + clear_highpage(page); #endif } diff --git a/drivers/xen/features.c b/drivers/xen/features.c index 0707714e40d6..99eda169c779 100644 --- a/drivers/xen/features.c +++ b/drivers/xen/features.c @@ -8,7 +8,11 @@ #include <linux/types.h> #include <linux/cache.h> #include <linux/module.h> -#include <asm/xen/hypervisor.h> + +#include <asm/xen/hypercall.h> + +#include <xen/interface/xen.h> +#include <xen/interface/version.h> #include <xen/features.h> u8 xen_features[XENFEAT_NR_SUBMAPS * 32] __read_mostly; diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 06592b9da83c..7d8f531fb8e8 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -40,6 +40,7 @@ #include <xen/interface/xen.h> #include <xen/page.h> #include <xen/grant_table.h> +#include <asm/xen/hypercall.h> #include <asm/pgtable.h> #include <asm/sync_bitops.h> |