summaryrefslogtreecommitdiff
path: root/include/asm-v850/teg.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-v850/teg.h')
-rw-r--r--include/asm-v850/teg.h101
1 files changed, 0 insertions, 101 deletions
diff --git a/include/asm-v850/teg.h b/include/asm-v850/teg.h
deleted file mode 100644
index acc8c7d95329..000000000000
--- a/include/asm-v850/teg.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * include/asm-v850/teg.h -- NB85E-TEG cpu chip
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_TEG_H__
-#define __V850_TEG_H__
-
-
-/* The TEG uses the V850E cpu core. */
-#include <asm/v850e.h>
-#include <asm/v850e_cache.h>
-
-
-#define CPU_MODEL "v850e/nb85e-teg"
-#define CPU_MODEL_LONG "NEC V850E/NB85E TEG"
-
-
-/* For <asm/entry.h> */
-/* We use on-chip RAM, for a few miscellaneous variables that must be
- accessible using a load instruction relative to R0. On the NB85E/TEG,
- There's 60KB of iRAM starting at 0xFFFF0000, however we need the base
- address to be addressable by a 16-bit signed offset, so we only use the
- second half of it starting from 0xFFFF8000. */
-#define R0_RAM_ADDR 0xFFFF8000
-
-
-/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).
- Some of these are parameterized even though there's only a single
- interrupt, for compatibility with some generic code that works on other
- processor models. */
-#define IRQ_INTCMD(n) 6 /* interval timer interrupt */
-#define IRQ_INTCMD_NUM 1
-#define IRQ_INTSER(n) 16 /* UART reception error */
-#define IRQ_INTSER_NUM 1
-#define IRQ_INTSR(n) 17 /* UART reception completion */
-#define IRQ_INTSR_NUM 1
-#define IRQ_INTST(n) 18 /* UART transmission completion */
-#define IRQ_INTST_NUM 1
-
-/* For <asm/irq.h> */
-#define NUM_CPU_IRQS 64
-
-
-/* TEG UART details. */
-#define V850E_UART_BASE_ADDR(n) (0xFFFFF600 + 0x10 * (n))
-#define V850E_UART_ASIM_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x0)
-#define V850E_UART_ASIS_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x2)
-#define V850E_UART_ASIF_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x4)
-#define V850E_UART_CKSR_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x6)
-#define V850E_UART_BRGC_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x8)
-#define V850E_UART_TXB_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0xA)
-#define V850E_UART_RXB_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0xC)
-#define V850E_UART_NUM_CHANNELS 1
-#define V850E_UART_BASE_FREQ CPU_CLOCK_FREQ
-/* This is a function that gets called before configuring the UART. */
-#define V850E_UART_PRE_CONFIGURE teg_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void teg_uart_pre_configure (unsigned chan,
- unsigned cflags, unsigned baud);
-#endif
-
-
-/* The TEG RTPU. */
-#define V850E_RTPU_BASE_ADDR 0xFFFFF210
-
-
-/* TEG series timer D details. */
-#define V850E_TIMER_D_BASE_ADDR 0xFFFFF210
-#define V850E_TIMER_D_TMCD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x0)
-#define V850E_TIMER_D_TMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x4)
-#define V850E_TIMER_D_CMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x8)
-#define V850E_TIMER_D_BASE_FREQ CPU_CLOCK_FREQ
-
-
-/* `Interrupt Source Select' control register. */
-#define TEG_ISS_ADDR 0xFFFFF7FA
-#define TEG_ISS (*(volatile u8 *)TEG_ISS_ADDR)
-
-/* Port 0 I/O register (bits 0-3 used). */
-#define TEG_PORT0_IO_ADDR 0xFFFFF7F2
-#define TEG_PORT0_IO (*(volatile u8 *)TEG_PORT0_IO_ADDR)
-/* Port 0 control register (bits 0-3 control mode, 0 = output, 1 = input). */
-#define TEG_PORT0_PM_ADDR 0xFFFFF7F4
-#define TEG_PORT0_PM (*(volatile u8 *)TEG_PORT0_PM_ADDR)
-
-
-#ifndef __ASSEMBLY__
-extern void teg_init_irqs (void);
-#endif
-
-
-#endif /* __V850_TEG_H__ */