diff options
Diffstat (limited to 'include/linux/mmc/host.h')
| -rw-r--r-- | include/linux/mmc/host.h | 73 |
1 files changed, 64 insertions, 9 deletions
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index ebd1cebbef0c..e7743eca1021 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -162,6 +162,50 @@ struct mmc_host_ops { unsigned int direction, int blk_size); }; +struct mmc_cqe_ops { + /* Allocate resources, and make the CQE operational */ + int (*cqe_enable)(struct mmc_host *host, struct mmc_card *card); + /* Free resources, and make the CQE non-operational */ + void (*cqe_disable)(struct mmc_host *host); + /* + * Issue a read, write or DCMD request to the CQE. Also deal with the + * effect of ->cqe_off(). + */ + int (*cqe_request)(struct mmc_host *host, struct mmc_request *mrq); + /* Free resources (e.g. DMA mapping) associated with the request */ + void (*cqe_post_req)(struct mmc_host *host, struct mmc_request *mrq); + /* + * Prepare the CQE and host controller to accept non-CQ commands. There + * is no corresponding ->cqe_on(), instead ->cqe_request() is required + * to deal with that. + */ + void (*cqe_off)(struct mmc_host *host); + /* + * Wait for all CQE tasks to complete. Return an error if recovery + * becomes necessary. + */ + int (*cqe_wait_for_idle)(struct mmc_host *host); + /* + * Notify CQE that a request has timed out. Return false if the request + * completed or true if a timeout happened in which case indicate if + * recovery is needed. + */ + bool (*cqe_timeout)(struct mmc_host *host, struct mmc_request *mrq, + bool *recovery_needed); + /* + * Stop all CQE activity and prepare the CQE and host controller to + * accept recovery commands. + */ + void (*cqe_recovery_start)(struct mmc_host *host); + /* + * Clear the queue and call mmc_cqe_request_done() on all requests. + * Requests that errored will have the error set on the mmc_request + * (data->error or cmd->error for DCMD). Requests that did not error + * will have zero data bytes transferred. + */ + void (*cqe_recovery_finish)(struct mmc_host *host); +}; + struct mmc_async_req { /* active mmc request */ struct mmc_request *mrq; @@ -211,6 +255,10 @@ struct mmc_supply { struct regulator *vqmmc; /* Optional Vccq supply */ }; +struct mmc_ctx { + struct task_struct *task; +}; + struct mmc_host { struct device *parent; struct device class_dev; @@ -272,7 +320,7 @@ struct mmc_host { #define MMC_CAP_UHS_SDR50 (1 << 18) /* Host supports UHS SDR50 mode */ #define MMC_CAP_UHS_SDR104 (1 << 19) /* Host supports UHS SDR104 mode */ #define MMC_CAP_UHS_DDR50 (1 << 20) /* Host supports UHS DDR50 mode */ -#define MMC_CAP_NO_BOUNCE_BUFF (1 << 21) /* Disable bounce buffers on host */ +/* (1 << 21) is free for reuse */ #define MMC_CAP_DRIVER_TYPE_A (1 << 23) /* Host supports Driver Type A */ #define MMC_CAP_DRIVER_TYPE_C (1 << 24) /* Host supports Driver Type C */ #define MMC_CAP_DRIVER_TYPE_D (1 << 25) /* Host supports Driver Type D */ @@ -291,10 +339,6 @@ struct mmc_host { MMC_CAP2_HS200_1_2V_SDR) #define MMC_CAP2_CD_ACTIVE_HIGH (1 << 10) /* Card-detect signal active high */ #define MMC_CAP2_RO_ACTIVE_HIGH (1 << 11) /* Write-protect signal active high */ -#define MMC_CAP2_PACKED_RD (1 << 12) /* Allow packed read */ -#define MMC_CAP2_PACKED_WR (1 << 13) /* Allow packed write */ -#define MMC_CAP2_PACKED_CMD (MMC_CAP2_PACKED_RD | \ - MMC_CAP2_PACKED_WR) #define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14) /* Don't power up before scan */ #define MMC_CAP2_HS400_1_8V (1 << 15) /* Can support HS400 1.8V */ #define MMC_CAP2_HS400_1_2V (1 << 16) /* Can support HS400 1.2V */ @@ -307,6 +351,10 @@ struct mmc_host { #define MMC_CAP2_HS400_ES (1 << 20) /* Host supports enhanced strobe */ #define MMC_CAP2_NO_SD (1 << 21) /* Do not send SD commands during initialization */ #define MMC_CAP2_NO_MMC (1 << 22) /* Do not send (e)MMC commands during initialization */ +#define MMC_CAP2_CQE (1 << 23) /* Has eMMC command queue engine */ +#define MMC_CAP2_CQE_DCMD (1 << 24) /* CQE can issue a direct command */ + + int fixed_drv_type; /* fixed driver type for non-removable media */ mmc_pm_flag_t pm_caps; /* supported pm features */ @@ -328,9 +376,6 @@ struct mmc_host { unsigned int use_spi_crc:1; unsigned int claimed:1; /* host exclusively claimed */ unsigned int bus_dead:1; /* bus has been released */ -#ifdef CONFIG_MMC_DEBUG - unsigned int removed:1; /* host is being removed */ -#endif unsigned int can_retune:1; /* re-tuning can be used */ unsigned int doing_retune:1; /* re-tuning in progress */ unsigned int retune_now:1; /* do re-tuning at next req */ @@ -349,8 +394,9 @@ struct mmc_host { struct mmc_card *card; /* device attached to this host */ wait_queue_head_t wq; - struct task_struct *claimer; /* task that has host claimed */ + struct mmc_ctx *claimer; /* context that has host claimed */ int claim_cnt; /* "claim" nesting count */ + struct mmc_ctx default_ctx; /* default context */ struct delayed_work detect; int detect_change; /* card detect flag */ @@ -393,6 +439,13 @@ struct mmc_host { int dsr_req; /* DSR value is valid */ u32 dsr; /* optional driver stage (DSR) value */ + /* Command Queue Engine (CQE) support */ + const struct mmc_cqe_ops *cqe_ops; + void *cqe_private; + int cqe_qdepth; + bool cqe_enabled; + bool cqe_on; + unsigned long private[0] ____cacheline_aligned; }; @@ -423,6 +476,8 @@ void mmc_detect_change(struct mmc_host *, unsigned long delay); void mmc_request_done(struct mmc_host *, struct mmc_request *); void mmc_command_done(struct mmc_host *host, struct mmc_request *mrq); +void mmc_cqe_request_done(struct mmc_host *host, struct mmc_request *mrq); + static inline void mmc_signal_sdio_irq(struct mmc_host *host) { host->ops->enable_sdio_irq(host, 0); |