diff options
Diffstat (limited to 'include/linux/platform_data')
-rw-r--r-- | include/linux/platform_data/cros_ec_commands.h | 83 | ||||
-rw-r--r-- | include/linux/platform_data/cros_ec_proto.h | 6 | ||||
-rw-r--r-- | include/linux/platform_data/davinci_asp.h | 15 | ||||
-rw-r--r-- | include/linux/platform_data/i2c-mux-gpio.h | 4 | ||||
-rw-r--r-- | include/linux/platform_data/lenovo-yoga-c630.h | 44 | ||||
-rw-r--r-- | include/linux/platform_data/mmc-pxamci.h | 4 | ||||
-rw-r--r-- | include/linux/platform_data/omap1_bl.h | 1 | ||||
-rw-r--r-- | include/linux/platform_data/spi-omap2-mcspi.h | 3 | ||||
-rw-r--r-- | include/linux/platform_data/ti-sysc.h | 1 | ||||
-rw-r--r-- | include/linux/platform_data/tmio.h | 62 | ||||
-rw-r--r-- | include/linux/platform_data/uio_pruss.h | 18 | ||||
-rw-r--r-- | include/linux/platform_data/x86/asus-wmi.h | 10 | ||||
-rw-r--r-- | include/linux/platform_data/x86/soc.h | 12 |
13 files changed, 213 insertions, 50 deletions
diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index ecc47d5fe239..e574b790be6f 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -3463,6 +3463,34 @@ union __ec_align_offset1 ec_response_get_next_data_v1 { }; BUILD_ASSERT(sizeof(union ec_response_get_next_data_v1) == 16); +union __ec_align_offset1 ec_response_get_next_data_v3 { + uint8_t key_matrix[18]; + + /* Unaligned */ + uint32_t host_event; + uint64_t host_event64; + + struct __ec_todo_unpacked { + /* For aligning the fifo_info */ + uint8_t reserved[3]; + struct ec_response_motion_sense_fifo_info info; + } sensor_fifo; + + uint32_t buttons; + + uint32_t switches; + + uint32_t fp_events; + + uint32_t sysrq; + + /* CEC events from enum mkbp_cec_event */ + uint32_t cec_events; + + uint8_t cec_message[16]; +}; +BUILD_ASSERT(sizeof(union ec_response_get_next_data_v3) == 18); + struct ec_response_get_next_event { uint8_t event_type; /* Followed by event data if any */ @@ -3475,6 +3503,12 @@ struct ec_response_get_next_event_v1 { union ec_response_get_next_data_v1 data; } __ec_align1; +struct ec_response_get_next_event_v3 { + uint8_t event_type; + /* Followed by event data if any */ + union ec_response_get_next_data_v3 data; +} __ec_align1; + /* Bit indices for buttons and switches.*/ /* Buttons */ #define EC_MKBP_POWER_BUTTON 0 @@ -3809,16 +3843,61 @@ struct ec_params_i2c_write { * discharge the battery. */ #define EC_CMD_CHARGE_CONTROL 0x0096 -#define EC_VER_CHARGE_CONTROL 1 +#define EC_VER_CHARGE_CONTROL 3 enum ec_charge_control_mode { CHARGE_CONTROL_NORMAL = 0, CHARGE_CONTROL_IDLE, CHARGE_CONTROL_DISCHARGE, + /* Add no more entry below. */ + CHARGE_CONTROL_COUNT, +}; + +#define EC_CHARGE_MODE_TEXT \ + { \ + [CHARGE_CONTROL_NORMAL] = "NORMAL", \ + [CHARGE_CONTROL_IDLE] = "IDLE", \ + [CHARGE_CONTROL_DISCHARGE] = "DISCHARGE", \ + } + +enum ec_charge_control_cmd { + EC_CHARGE_CONTROL_CMD_SET = 0, + EC_CHARGE_CONTROL_CMD_GET, +}; + +enum ec_charge_control_flag { + EC_CHARGE_CONTROL_FLAG_NO_IDLE = BIT(0), }; struct ec_params_charge_control { - uint32_t mode; /* enum charge_control_mode */ + uint32_t mode; /* enum charge_control_mode */ + + /* Below are the fields added in V2. */ + uint8_t cmd; /* enum ec_charge_control_cmd. */ + uint8_t flags; /* enum ec_charge_control_flag (v3+) */ + /* + * Lower and upper thresholds for battery sustainer. This struct isn't + * named to avoid tainting foreign projects' name spaces. + * + * If charge mode is explicitly set (e.g. DISCHARGE), battery sustainer + * will be disabled. To disable battery sustainer, set mode=NORMAL, + * lower=-1, upper=-1. + */ + struct { + int8_t lower; /* Display SoC in percentage. */ + int8_t upper; /* Display SoC in percentage. */ + } sustain_soc; +} __ec_align4; + +/* Added in v2 */ +struct ec_response_charge_control { + uint32_t mode; /* enum charge_control_mode */ + struct { /* Battery sustainer thresholds */ + int8_t lower; + int8_t upper; + } sustain_soc; + uint8_t flags; /* enum ec_charge_control_flag (v3+) */ + uint8_t reserved; } __ec_align4; /*****************************************************************************/ diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h index 8865e350c12a..b34ed0cc1f8d 100644 --- a/include/linux/platform_data/cros_ec_proto.h +++ b/include/linux/platform_data/cros_ec_proto.h @@ -185,7 +185,7 @@ struct cros_ec_device { bool host_sleep_v1; struct blocking_notifier_head event_notifier; - struct ec_response_get_next_event_v1 event_data; + struct ec_response_get_next_event_v3 event_data; int event_size; u32 host_event_wake_mask; u32 last_resume_result; @@ -261,6 +261,10 @@ int cros_ec_get_sensor_count(struct cros_ec_dev *ec); int cros_ec_cmd(struct cros_ec_device *ec_dev, unsigned int version, int command, const void *outdata, size_t outsize, void *indata, size_t insize); +int cros_ec_cmd_readmem(struct cros_ec_device *ec_dev, u8 offset, u8 size, void *dest); + +int cros_ec_get_cmd_versions(struct cros_ec_device *ec_dev, u16 cmd); + /** * cros_ec_get_time_ns() - Return time in ns. * diff --git a/include/linux/platform_data/davinci_asp.h b/include/linux/platform_data/davinci_asp.h index c8645b2ed3c0..b9c8520b4bd3 100644 --- a/include/linux/platform_data/davinci_asp.h +++ b/include/linux/platform_data/davinci_asp.h @@ -26,16 +26,6 @@ struct davinci_mcasp_pdata { struct gen_pool *sram_pool; /* - * If McBSP peripheral gets the clock from an external pin, - * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR - * and MCBSP_CLKS. - * Depending on different hardware connections it is possible - * to use this setting to change the behaviour of McBSP - * driver. - */ - int clk_input_pin; - - /* * This flag works when both clock and FS are outputs for the cpu * and makes clock more accurate (FS is not symmetrical and the * clock is very fast. @@ -91,11 +81,6 @@ enum { MCASP_VERSION_OMAP, /* OMAP4/5 */ }; -enum mcbsp_clk_input_pin { - MCBSP_CLKR = 0, /* as in DM365 */ - MCBSP_CLKS, -}; - #define INACTIVE_MODE 0 #define TX_MODE 1 #define RX_MODE 2 diff --git a/include/linux/platform_data/i2c-mux-gpio.h b/include/linux/platform_data/i2c-mux-gpio.h index 5e4c2c272a73..96843aab4d1e 100644 --- a/include/linux/platform_data/i2c-mux-gpio.h +++ b/include/linux/platform_data/i2c-mux-gpio.h @@ -18,16 +18,16 @@ * @values: Array of bitmasks of GPIO settings (low/high) for each * position * @n_values: Number of multiplexer positions (busses to instantiate) - * @classes: Optional I2C auto-detection classes * @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used + * @settle_time: Delay to wait when a new bus is selected */ struct i2c_mux_gpio_platform_data { int parent; int base_nr; const unsigned *values; int n_values; - const unsigned *classes; unsigned idle; + u32 settle_time; }; #endif /* _LINUX_I2C_MUX_GPIO_H */ diff --git a/include/linux/platform_data/lenovo-yoga-c630.h b/include/linux/platform_data/lenovo-yoga-c630.h new file mode 100644 index 000000000000..5d1f9fb33cfc --- /dev/null +++ b/include/linux/platform_data/lenovo-yoga-c630.h @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022-2024, Linaro Ltd + * Authors: + * Bjorn Andersson + * Dmitry Baryshkov + */ + +#ifndef _LENOVO_YOGA_C630_DATA_H +#define _LENOVO_YOGA_C630_DATA_H + +struct yoga_c630_ec; +struct notifier_block; + +#define YOGA_C630_MOD_NAME "lenovo_yoga_c630" + +#define YOGA_C630_DEV_UCSI "ucsi" +#define YOGA_C630_DEV_PSY "psy" + +int yoga_c630_ec_read8(struct yoga_c630_ec *ec, u8 addr); +int yoga_c630_ec_read16(struct yoga_c630_ec *ec, u8 addr); + +int yoga_c630_ec_register_notify(struct yoga_c630_ec *ec, struct notifier_block *nb); +void yoga_c630_ec_unregister_notify(struct yoga_c630_ec *ec, struct notifier_block *nb); + +#define YOGA_C630_UCSI_WRITE_SIZE 8 +#define YOGA_C630_UCSI_CCI_SIZE 4 +#define YOGA_C630_UCSI_DATA_SIZE 16 +#define YOGA_C630_UCSI_READ_SIZE (YOGA_C630_UCSI_CCI_SIZE + YOGA_C630_UCSI_DATA_SIZE) + +u16 yoga_c630_ec_ucsi_get_version(struct yoga_c630_ec *ec); +int yoga_c630_ec_ucsi_write(struct yoga_c630_ec *ec, + const u8 req[YOGA_C630_UCSI_WRITE_SIZE]); +int yoga_c630_ec_ucsi_read(struct yoga_c630_ec *ec, + u8 resp[YOGA_C630_UCSI_READ_SIZE]); + +#define LENOVO_EC_EVENT_USB 0x20 +#define LENOVO_EC_EVENT_UCSI 0x21 +#define LENOVO_EC_EVENT_HPD 0x22 +#define LENOVO_EC_EVENT_BAT_STATUS 0x24 +#define LENOVO_EC_EVENT_BAT_INFO 0x25 +#define LENOVO_EC_EVENT_BAT_ADPT_STATUS 0x37 + +#endif diff --git a/include/linux/platform_data/mmc-pxamci.h b/include/linux/platform_data/mmc-pxamci.h index 7e44e84e7150..652f323b5ecc 100644 --- a/include/linux/platform_data/mmc-pxamci.h +++ b/include/linux/platform_data/mmc-pxamci.h @@ -7,6 +7,7 @@ struct device; struct mmc_host; +struct property_entry; struct pxamci_platform_data { unsigned int ocr_mask; /* available voltages */ @@ -18,7 +19,8 @@ struct pxamci_platform_data { bool gpio_card_ro_invert; /* gpio ro is inverted */ }; -extern void pxa_set_mci_info(struct pxamci_platform_data *info); +extern void pxa_set_mci_info(const struct pxamci_platform_data *info, + const struct property_entry *props); extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info); extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info); diff --git a/include/linux/platform_data/omap1_bl.h b/include/linux/platform_data/omap1_bl.h index 5e8b17d77a5f..3d0bab31a0a9 100644 --- a/include/linux/platform_data/omap1_bl.h +++ b/include/linux/platform_data/omap1_bl.h @@ -6,7 +6,6 @@ struct omap_backlight_config { int default_intensity; - int (*set_power)(struct device *dev, int state); }; #endif diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h index 3b400b1919a9..9e3c15b4ac91 100644 --- a/include/linux/platform_data/spi-omap2-mcspi.h +++ b/include/linux/platform_data/spi-omap2-mcspi.h @@ -16,9 +16,6 @@ struct omap2_mcspi_platform_config { struct omap2_mcspi_device_config { unsigned turbo_mode:1; - - /* toggle chip select after every word */ - unsigned cs_per_word:1; }; #endif diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index eb556f988d57..d8f15770a522 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -71,7 +71,6 @@ struct sysc_regbits { #define SYSC_QUIRK_SWSUP_SIDLE_ACT BIT(12) #define SYSC_QUIRK_SWSUP_SIDLE BIT(11) #define SYSC_QUIRK_EXT_OPT_CLOCK BIT(10) -#define SYSC_QUIRK_LEGACY_IDLE BIT(9) #define SYSC_QUIRK_RESET_STATUS BIT(8) #define SYSC_QUIRK_NO_IDLE BIT(7) #define SYSC_QUIRK_NO_IDLE_ON_INIT BIT(6) diff --git a/include/linux/platform_data/tmio.h b/include/linux/platform_data/tmio.h new file mode 100644 index 000000000000..b060124ba1ae --- /dev/null +++ b/include/linux/platform_data/tmio.h @@ -0,0 +1,62 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef MFD_TMIO_H +#define MFD_TMIO_H + +#include <linux/platform_device.h> +#include <linux/types.h> + +/* TMIO MMC platform flags */ + +/* + * Some controllers can support a 2-byte block size when the bus width is + * configured in 4-bit mode. + */ +#define TMIO_MMC_BLKSZ_2BYTES BIT(1) + +/* Some controllers can support SDIO IRQ signalling */ +#define TMIO_MMC_SDIO_IRQ BIT(2) + +/* Some features are only available or tested on R-Car Gen2 or later */ +#define TMIO_MMC_MIN_RCAR2 BIT(3) + +/* + * Some controllers require waiting for the SD bus to become idle before + * writing to some registers. + */ +#define TMIO_MMC_HAS_IDLE_WAIT BIT(4) + +/* + * Use the busy timeout feature. Probably all TMIO versions support it. Yet, + * we don't have documentation for old variants, so we enable only known good + * variants with this flag. Can be removed once all variants are known good. + */ +#define TMIO_MMC_USE_BUSY_TIMEOUT BIT(5) + +/* Some controllers have CMD12 automatically issue/non-issue register */ +#define TMIO_MMC_HAVE_CMD12_CTRL BIT(7) + +/* Controller has some SDIO status bits which must be 1 */ +#define TMIO_MMC_SDIO_STATUS_SETBITS BIT(8) + +/* Some controllers have a 32-bit wide data port register */ +#define TMIO_MMC_32BIT_DATA_PORT BIT(9) + +/* Some controllers allows to set SDx actual clock */ +#define TMIO_MMC_CLK_ACTUAL BIT(10) + +/* Some controllers have a CBSY bit */ +#define TMIO_MMC_HAVE_CBSY BIT(11) + +struct tmio_mmc_data { + void *chan_priv_tx; + void *chan_priv_rx; + unsigned int hclk; + unsigned long capabilities; + unsigned long capabilities2; + unsigned long flags; + u32 ocr_mask; /* available voltages */ + dma_addr_t dma_rx_offset; + unsigned int max_blk_count; + unsigned short max_segs; +}; +#endif diff --git a/include/linux/platform_data/uio_pruss.h b/include/linux/platform_data/uio_pruss.h deleted file mode 100644 index f76fa393b802..000000000000 --- a/include/linux/platform_data/uio_pruss.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * include/linux/platform_data/uio_pruss.h - * - * Platform data for uio_pruss driver - * - * Copyright (C) 2010-11 Texas Instruments Incorporated - https://www.ti.com/ - */ - -#ifndef _UIO_PRUSS_H_ -#define _UIO_PRUSS_H_ - -/* To configure the PRUSS INTC base offset for UIO driver */ -struct uio_pruss_pdata { - u32 pintc_base; - struct gen_pool *sram_pool; -}; -#endif /* _UIO_PRUSS_H_ */ diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h index ab1c7deff118..0aeeae1c1943 100644 --- a/include/linux/platform_data/x86/asus-wmi.h +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -51,6 +51,10 @@ #define ASUS_WMI_DEVID_LED6 0x00020016 #define ASUS_WMI_DEVID_MICMUTE_LED 0x00040017 +/* Disable Camera LED */ +#define ASUS_WMI_DEVID_CAMERA_LED_NEG 0x00060078 /* 0 = on (unused) */ +#define ASUS_WMI_DEVID_CAMERA_LED 0x00060079 /* 1 = on */ + /* Backlight and Brightness */ #define ASUS_WMI_DEVID_ALS_ENABLE 0x00050001 /* Ambient Light Sensor */ #define ASUS_WMI_DEVID_BACKLIGHT 0x00050011 @@ -71,6 +75,7 @@ #define ASUS_WMI_DEVID_LID_FLIP 0x00060062 #define ASUS_WMI_DEVID_LID_FLIP_ROG 0x00060077 #define ASUS_WMI_DEVID_MINI_LED_MODE 0x0005001E +#define ASUS_WMI_DEVID_MINI_LED_MODE2 0x0005002E /* Storage */ #define ASUS_WMI_DEVID_CARDREADER 0x00080013 @@ -127,13 +132,18 @@ /* gpu mux switch, 0 = dGPU, 1 = Optimus */ #define ASUS_WMI_DEVID_GPU_MUX 0x00090016 +#define ASUS_WMI_DEVID_GPU_MUX_VIVO 0x00090026 /* TUF laptop RGB modes/colours */ #define ASUS_WMI_DEVID_TUF_RGB_MODE 0x00100056 +#define ASUS_WMI_DEVID_TUF_RGB_MODE2 0x0010005A /* TUF laptop RGB power/state */ #define ASUS_WMI_DEVID_TUF_RGB_STATE 0x00100057 +/* Bootup sound control */ +#define ASUS_WMI_DEVID_BOOT_SOUND 0x00130022 + /* DSTS masks */ #define ASUS_WMI_DSTS_STATUS_BIT 0x00000001 #define ASUS_WMI_DSTS_UNKNOWN_BIT 0x00000002 diff --git a/include/linux/platform_data/x86/soc.h b/include/linux/platform_data/x86/soc.h index a5705189e2ac..f981907a5cb0 100644 --- a/include/linux/platform_data/x86/soc.h +++ b/include/linux/platform_data/x86/soc.h @@ -20,7 +20,7 @@ static inline bool soc_intel_is_##soc(void) \ { \ static const struct x86_cpu_id soc##_cpu_ids[] = { \ - X86_MATCH_INTEL_FAM6_MODEL(type, NULL), \ + X86_MATCH_VFM(type, NULL), \ {} \ }; \ const struct x86_cpu_id *id; \ @@ -31,11 +31,11 @@ static inline bool soc_intel_is_##soc(void) \ return false; \ } -SOC_INTEL_IS_CPU(byt, ATOM_SILVERMONT); -SOC_INTEL_IS_CPU(cht, ATOM_AIRMONT); -SOC_INTEL_IS_CPU(apl, ATOM_GOLDMONT); -SOC_INTEL_IS_CPU(glk, ATOM_GOLDMONT_PLUS); -SOC_INTEL_IS_CPU(cml, KABYLAKE_L); +SOC_INTEL_IS_CPU(byt, INTEL_ATOM_SILVERMONT); +SOC_INTEL_IS_CPU(cht, INTEL_ATOM_AIRMONT); +SOC_INTEL_IS_CPU(apl, INTEL_ATOM_GOLDMONT); +SOC_INTEL_IS_CPU(glk, INTEL_ATOM_GOLDMONT_PLUS); +SOC_INTEL_IS_CPU(cml, INTEL_KABYLAKE_L); #undef SOC_INTEL_IS_CPU |