diff options
Diffstat (limited to 'include/linux/soc')
| -rw-r--r-- | include/linux/soc/apple/rtkit.h | 4 | ||||
| -rw-r--r-- | include/linux/soc/mediatek/mtk-cmdq.h | 181 | ||||
| -rw-r--r-- | include/linux/soc/qcom/apr.h | 2 | ||||
| -rw-r--r-- | include/linux/soc/qcom/llcc-qcom.h | 4 | ||||
| -rw-r--r-- | include/linux/soc/qcom/smem.h | 3 | ||||
| -rw-r--r-- | include/linux/soc/qcom/socinfo.h | 34 | ||||
| -rw-r--r-- | include/linux/soc/samsung/exynos-regs-pmu.h | 6 |
7 files changed, 207 insertions, 27 deletions
diff --git a/include/linux/soc/apple/rtkit.h b/include/linux/soc/apple/rtkit.h index 8c9ca857ccf6..c06d17599ae7 100644 --- a/include/linux/soc/apple/rtkit.h +++ b/include/linux/soc/apple/rtkit.h @@ -69,7 +69,7 @@ struct apple_rtkit; * Initializes the internal state required to handle RTKit. This * should usually be called within _probe. * - * @dev: Pointer to the device node this coprocessor is assocated with + * @dev: Pointer to the device node this coprocessor is associated with * @cookie: opaque cookie passed to all functions defined in rtkit_ops * @mbox_name: mailbox name used to communicate with the co-processor * @mbox_idx: mailbox index to be used if mbox_name is NULL @@ -83,7 +83,7 @@ struct apple_rtkit *devm_apple_rtkit_init(struct device *dev, void *cookie, * Non-devm version of devm_apple_rtkit_init. Must be freed with * apple_rtkit_free. * - * @dev: Pointer to the device node this coprocessor is assocated with + * @dev: Pointer to the device node this coprocessor is associated with * @cookie: opaque cookie passed to all functions defined in rtkit_ops * @mbox_name: mailbox name used to communicate with the co-processor * @mbox_idx: mailbox index to be used if mbox_name is NULL diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h index 649955d2cf5c..5bee6f7fc400 100644 --- a/include/linux/soc/mediatek/mtk-cmdq.h +++ b/include/linux/soc/mediatek/mtk-cmdq.h @@ -14,8 +14,42 @@ #define CMDQ_ADDR_HIGH(addr) ((u32)(((addr) >> 16) & GENMASK(31, 0))) #define CMDQ_ADDR_LOW(addr) ((u16)(addr) | BIT(1)) +/* + * Every cmdq thread has its own SPRs (Specific Purpose Registers), + * so there are 4 * N (threads) SPRs in GCE that shares the same indexes below. + */ +#define CMDQ_THR_SPR_IDX0 (0) +#define CMDQ_THR_SPR_IDX1 (1) +#define CMDQ_THR_SPR_IDX2 (2) +#define CMDQ_THR_SPR_IDX3 (3) + struct cmdq_pkt; +enum cmdq_logic_op { + CMDQ_LOGIC_ASSIGN = 0, + CMDQ_LOGIC_ADD = 1, + CMDQ_LOGIC_SUBTRACT = 2, + CMDQ_LOGIC_MULTIPLY = 3, + CMDQ_LOGIC_XOR = 8, + CMDQ_LOGIC_NOT = 9, + CMDQ_LOGIC_OR = 10, + CMDQ_LOGIC_AND = 11, + CMDQ_LOGIC_LEFT_SHIFT = 12, + CMDQ_LOGIC_RIGHT_SHIFT = 13, + CMDQ_LOGIC_MAX, +}; + +struct cmdq_operand { + /* register type */ + bool reg; + union { + /* index */ + u16 idx; + /* value */ + u16 value; + }; +}; + struct cmdq_client_reg { u8 subsys; u16 offset; @@ -62,17 +96,19 @@ void cmdq_mbox_destroy(struct cmdq_client *client); /** * cmdq_pkt_create() - create a CMDQ packet * @client: the CMDQ mailbox client + * @pkt: the CMDQ packet * @size: required CMDQ buffer size * - * Return: CMDQ packet pointer + * Return: 0 for success; else the error code is returned */ -struct cmdq_pkt *cmdq_pkt_create(struct cmdq_client *client, size_t size); +int cmdq_pkt_create(struct cmdq_client *client, struct cmdq_pkt *pkt, size_t size); /** * cmdq_pkt_destroy() - destroy the CMDQ packet + * @client: the CMDQ mailbox client * @pkt: the CMDQ packet */ -void cmdq_pkt_destroy(struct cmdq_pkt *pkt); +void cmdq_pkt_destroy(struct cmdq_client *client, struct cmdq_pkt *pkt); /** * cmdq_pkt_write() - append write command to the CMDQ packet @@ -174,6 +210,18 @@ int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, u16 addr_low, u32 value, u32 mask); /** + * cmdq_pkt_mem_move() - append memory move command to the CMDQ packet + * @pkt: the CMDQ packet + * @src_addr: source address + * @dst_addr: destination address + * + * Appends a CMDQ command to copy the value found in `src_addr` to `dst_addr`. + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_mem_move(struct cmdq_pkt *pkt, dma_addr_t src_addr, dma_addr_t dst_addr); + +/** * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet * @pkt: the CMDQ packet * @event: the desired event type to wait @@ -184,6 +232,21 @@ int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear); /** + * cmdq_pkt_acquire_event() - append acquire event command to the CMDQ packet + * @pkt: the CMDQ packet + * @event: the desired event to be acquired + * + * User can use cmdq_pkt_acquire_event() as `mutex_lock` and cmdq_pkt_clear_event() + * as `mutex_unlock` to protect some `critical section` instructions between them. + * cmdq_pkt_acquire_event() would wait for event to be cleared. + * After event is cleared by cmdq_pkt_clear_event in other GCE threads, + * cmdq_pkt_acquire_event() would set event and keep executing next instruction. + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_acquire_event(struct cmdq_pkt *pkt, u16 event); + +/** * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet * @pkt: the CMDQ packet * @event: the desired event to be cleared @@ -235,6 +298,23 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value, u32 mask); /** + * cmdq_pkt_logic_command() - Append logic command to the CMDQ packet, ask GCE to + * execute an instruction that store the result of logic operation + * with left and right operand into result_reg_idx. + * @pkt: the CMDQ packet + * @result_reg_idx: SPR index that store operation result of left_operand and right_operand + * @left_operand: left operand + * @s_op: the logic operator enum + * @right_operand: right operand + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_logic_command(struct cmdq_pkt *pkt, u16 result_reg_idx, + struct cmdq_operand *left_operand, + enum cmdq_logic_op s_op, + struct cmdq_operand *right_operand); + +/** * cmdq_pkt_assign() - Append logic assign command to the CMDQ packet, ask GCE * to execute an instruction that set a constant value into * internal register and use as value, mask or address in @@ -248,36 +328,76 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys, int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value); /** - * cmdq_pkt_jump() - Append jump command to the CMDQ packet, ask GCE - * to execute an instruction that change current thread PC to - * a physical address which should contains more instruction. + * cmdq_pkt_poll_addr() - Append blocking POLL command to CMDQ packet + * @pkt: the CMDQ packet + * @addr: the hardware register address + * @value: the specified target register value + * @mask: the specified target register mask + * + * Appends a polling (POLL) command to the CMDQ packet and asks the GCE + * to execute an instruction that checks for the specified `value` (with + * or without `mask`) to appear in the specified hardware register `addr`. + * All GCE threads will be blocked by this instruction. + * + * Return: 0 for success or negative error code + */ +int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32 value, u32 mask); + +/** + * cmdq_pkt_jump_abs() - Append jump command to the CMDQ packet, ask GCE + * to execute an instruction that change current thread + * PC to a absolute physical address which should + * contains more instruction. * @pkt: the CMDQ packet - * @addr: physical address of target instruction buffer + * @addr: absolute physical address of target instruction buffer + * @shift_pa: shift bits of physical address in CMDQ instruction. This value + * is got by cmdq_get_shift_pa(). * * Return: 0 for success; else the error code is returned */ -int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr); +int cmdq_pkt_jump_abs(struct cmdq_pkt *pkt, dma_addr_t addr, u8 shift_pa); + +/* This wrapper has to be removed after all users migrated to jump_abs */ +static inline int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr, u8 shift_pa) +{ + return cmdq_pkt_jump_abs(pkt, addr, shift_pa); +} /** - * cmdq_pkt_finalize() - Append EOC and jump command to pkt. + * cmdq_pkt_jump_rel() - Append jump command to the CMDQ packet, ask GCE + * to execute an instruction that change current thread + * PC to a physical address with relative offset. The + * target address should contains more instruction. * @pkt: the CMDQ packet + * @offset: relative offset of target instruction buffer from current PC. + * @shift_pa: shift bits of physical address in CMDQ instruction. This value + * is got by cmdq_get_shift_pa(). * * Return: 0 for success; else the error code is returned */ -int cmdq_pkt_finalize(struct cmdq_pkt *pkt); +int cmdq_pkt_jump_rel(struct cmdq_pkt *pkt, s32 offset, u8 shift_pa); /** - * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ - * packet and call back at the end of done packet + * cmdq_pkt_eoc() - Append EOC and ask GCE to generate an IRQ at end of execution + * @pkt: The CMDQ packet + * + * Appends an End Of Code (EOC) command to the CMDQ packet and asks the GCE + * to generate an interrupt at the end of the execution of all commands in + * the pipeline. + * The EOC command is usually appended to the end of the pipeline to notify + * that all commands are done. + * + * Return: 0 for success or negative error number + */ +int cmdq_pkt_eoc(struct cmdq_pkt *pkt); + +/** + * cmdq_pkt_finalize() - Append EOC and jump command to pkt. * @pkt: the CMDQ packet * * Return: 0 for success; else the error code is returned - * - * Trigger CMDQ to asynchronously execute the CMDQ packet and call back - * at the end of done packet. Note that this is an ASYNC function. When the - * function returned, it may or may not be finished. */ -int cmdq_pkt_flush_async(struct cmdq_pkt *pkt); +int cmdq_pkt_finalize(struct cmdq_pkt *pkt); #else /* IS_ENABLED(CONFIG_MTK_CMDQ) */ @@ -294,12 +414,12 @@ static inline struct cmdq_client *cmdq_mbox_create(struct device *dev, int index static inline void cmdq_mbox_destroy(struct cmdq_client *client) { } -static inline struct cmdq_pkt *cmdq_pkt_create(struct cmdq_client *client, size_t size) +static inline int cmdq_pkt_create(struct cmdq_client *client, struct cmdq_pkt *pkt, size_t size) { - return ERR_PTR(-EINVAL); + return -EINVAL; } -static inline void cmdq_pkt_destroy(struct cmdq_pkt *pkt) { } +static inline void cmdq_pkt_destroy(struct cmdq_client *client, struct cmdq_pkt *pkt) { } static inline int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value) { @@ -374,17 +494,32 @@ static inline int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value) return -EINVAL; } -static inline int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr) +static inline int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32 value, u32 mask) { return -EINVAL; } -static inline int cmdq_pkt_finalize(struct cmdq_pkt *pkt) +static inline int cmdq_pkt_jump_abs(struct cmdq_pkt *pkt, dma_addr_t addr, u8 shift_pa) +{ + return -EINVAL; +} + +static inline int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr, u8 shift_pa) +{ + return -EINVAL; +} + +static inline int cmdq_pkt_jump_rel(struct cmdq_pkt *pkt, s32 offset, u8 shift_pa) +{ + return -EINVAL; +} + +static inline int cmdq_pkt_eoc(struct cmdq_pkt *pkt) { return -EINVAL; } -static inline int cmdq_pkt_flush_async(struct cmdq_pkt *pkt) +static inline int cmdq_pkt_finalize(struct cmdq_pkt *pkt) { return -EINVAL; } diff --git a/include/linux/soc/qcom/apr.h b/include/linux/soc/qcom/apr.h index 7161a3183eda..a532d1e4b1f4 100644 --- a/include/linux/soc/qcom/apr.h +++ b/include/linux/soc/qcom/apr.h @@ -162,7 +162,7 @@ struct apr_driver { }; typedef struct apr_driver gpr_driver_t; -#define to_apr_driver(d) container_of(d, struct apr_driver, driver) +#define to_apr_driver(d) container_of_const(d, struct apr_driver, driver) /* * use a macro to avoid include chaining to get THIS_MODULE diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h index 1a886666bbb6..9e9f528b1370 100644 --- a/include/linux/soc/qcom/llcc-qcom.h +++ b/include/linux/soc/qcom/llcc-qcom.h @@ -115,7 +115,8 @@ struct llcc_edac_reg_offset { /** * struct llcc_drv_data - Data associated with the llcc driver * @regmaps: regmaps associated with the llcc device - * @bcast_regmap: regmap associated with llcc broadcast offset + * @bcast_regmap: regmap associated with llcc broadcast OR offset + * @bcast_and_regmap: regmap associated with llcc broadcast AND offset * @cfg: pointer to the data structure for slice configuration * @edac_reg_offset: Offset of the LLCC EDAC registers * @lock: mutex associated with each slice @@ -129,6 +130,7 @@ struct llcc_edac_reg_offset { struct llcc_drv_data { struct regmap **regmaps; struct regmap *bcast_regmap; + struct regmap *bcast_and_regmap; const struct llcc_slice_config *cfg; const struct llcc_edac_reg_offset *edac_reg_offset; struct mutex lock; diff --git a/include/linux/soc/qcom/smem.h b/include/linux/soc/qcom/smem.h index a36a3b9d4929..f946e3beca21 100644 --- a/include/linux/soc/qcom/smem.h +++ b/include/linux/soc/qcom/smem.h @@ -13,5 +13,8 @@ int qcom_smem_get_free_space(unsigned host); phys_addr_t qcom_smem_virt_to_phys(void *p); int qcom_smem_get_soc_id(u32 *id); +int qcom_smem_get_feature_code(u32 *code); + +int qcom_smem_bust_hwspin_lock_by_host(unsigned int host); #endif diff --git a/include/linux/soc/qcom/socinfo.h b/include/linux/soc/qcom/socinfo.h index e78777bb0f4a..608950443eee 100644 --- a/include/linux/soc/qcom/socinfo.h +++ b/include/linux/soc/qcom/socinfo.h @@ -3,6 +3,8 @@ #ifndef __QCOM_SOCINFO_H__ #define __QCOM_SOCINFO_H__ +#include <linux/types.h> + /* * SMEM item id, used to acquire handles to respective * SMEM region. @@ -12,6 +14,14 @@ #define SMEM_SOCINFO_BUILD_ID_LENGTH 32 #define SMEM_SOCINFO_CHIP_ID_LENGTH 32 +/* + * SoC version type with major number in the upper 16 bits and minor + * number in the lower 16 bits. + */ +#define SOCINFO_MAJOR(ver) (((ver) >> 16) & 0xffff) +#define SOCINFO_MINOR(ver) ((ver) & 0xffff) +#define SOCINFO_VERSION(maj, min) ((((maj) & 0xffff) << 16)|((min) & 0xffff)) + /* Socinfo SMEM item structure */ struct socinfo { __le32 fmt; @@ -74,4 +84,28 @@ struct socinfo { __le32 boot_core; }; +/* Internal feature codes */ +enum qcom_socinfo_feature_code { + /* External feature codes */ + SOCINFO_FC_UNKNOWN = 0x0, + SOCINFO_FC_AA, + SOCINFO_FC_AB, + SOCINFO_FC_AC, + SOCINFO_FC_AD, + SOCINFO_FC_AE, + SOCINFO_FC_AF, + SOCINFO_FC_AG, + SOCINFO_FC_AH, +}; + +/* Internal feature codes */ +/* Valid values: 0 <= n <= 0xf */ +#define SOCINFO_FC_Yn(n) (0xf1 + (n)) +#define SOCINFO_FC_INT_MAX SOCINFO_FC_Yn(0xf) + +/* Product codes */ +#define SOCINFO_PC_UNKNOWN 0 +#define SOCINFO_PCn(n) ((n) + 1) +#define SOCINFO_PC_RESERVE (BIT(31) - 1) + #endif diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h index aa840ed043e1..ce1a3790d6fb 100644 --- a/include/linux/soc/samsung/exynos-regs-pmu.h +++ b/include/linux/soc/samsung/exynos-regs-pmu.h @@ -657,4 +657,10 @@ #define EXYNOS5433_PAD_RETENTION_UFS_OPTION (0x3268) #define EXYNOS5433_PAD_RETENTION_FSYSGENIO_OPTION (0x32A8) +/* For Tensor GS101 */ +#define GS101_SYSIP_DAT0 (0x810) +#define GS101_SYSTEM_CONFIGURATION (0x3A00) +#define GS101_PHY_CTRL_USB20 (0x3EB0) +#define GS101_PHY_CTRL_USBDP (0x3EB4) + #endif /* __LINUX_SOC_EXYNOS_REGS_PMU_H */ |