diff options
Diffstat (limited to 'include/linux')
32 files changed, 1351 insertions, 162 deletions
diff --git a/include/linux/cgroup_subsys.h b/include/linux/cgroup_subsys.h index 9c22396e8b50..9c8d31bacf46 100644 --- a/include/linux/cgroup_subsys.h +++ b/include/linux/cgroup_subsys.h @@ -54,3 +54,9 @@ SUBSYS(freezer) #endif /* */ + +#ifdef CONFIG_NET_CLS_CGROUP +SUBSYS(net_cls) +#endif + +/* */ diff --git a/include/linux/dcbnl.h b/include/linux/dcbnl.h new file mode 100644 index 000000000000..e73a61449ad6 --- /dev/null +++ b/include/linux/dcbnl.h @@ -0,0 +1,338 @@ +/* + * Copyright (c) 2008, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + * + * Author: Lucy Liu <lucy.liu@intel.com> + */ + +#ifndef __LINUX_DCBNL_H__ +#define __LINUX_DCBNL_H__ + +#define DCB_PROTO_VERSION 1 + +struct dcbmsg { + unsigned char dcb_family; + __u8 cmd; + __u16 dcb_pad; +}; + +/** + * enum dcbnl_commands - supported DCB commands + * + * @DCB_CMD_UNDEFINED: unspecified command to catch errors + * @DCB_CMD_GSTATE: request the state of DCB in the device + * @DCB_CMD_SSTATE: set the state of DCB in the device + * @DCB_CMD_PGTX_GCFG: request the priority group configuration for Tx + * @DCB_CMD_PGTX_SCFG: set the priority group configuration for Tx + * @DCB_CMD_PGRX_GCFG: request the priority group configuration for Rx + * @DCB_CMD_PGRX_SCFG: set the priority group configuration for Rx + * @DCB_CMD_PFC_GCFG: request the priority flow control configuration + * @DCB_CMD_PFC_SCFG: set the priority flow control configuration + * @DCB_CMD_SET_ALL: apply all changes to the underlying device + * @DCB_CMD_GPERM_HWADDR: get the permanent MAC address of the underlying + * device. Only useful when using bonding. + * @DCB_CMD_GCAP: request the DCB capabilities of the device + * @DCB_CMD_GNUMTCS: get the number of traffic classes currently supported + * @DCB_CMD_SNUMTCS: set the number of traffic classes + * @DCB_CMD_GBCN: set backward congestion notification configuration + * @DCB_CMD_SBCN: get backward congestion notification configration. + */ +enum dcbnl_commands { + DCB_CMD_UNDEFINED, + + DCB_CMD_GSTATE, + DCB_CMD_SSTATE, + + DCB_CMD_PGTX_GCFG, + DCB_CMD_PGTX_SCFG, + DCB_CMD_PGRX_GCFG, + DCB_CMD_PGRX_SCFG, + + DCB_CMD_PFC_GCFG, + DCB_CMD_PFC_SCFG, + + DCB_CMD_SET_ALL, + + DCB_CMD_GPERM_HWADDR, + + DCB_CMD_GCAP, + + DCB_CMD_GNUMTCS, + DCB_CMD_SNUMTCS, + + DCB_CMD_PFC_GSTATE, + DCB_CMD_PFC_SSTATE, + + DCB_CMD_BCN_GCFG, + DCB_CMD_BCN_SCFG, + + __DCB_CMD_ENUM_MAX, + DCB_CMD_MAX = __DCB_CMD_ENUM_MAX - 1, +}; + +/** + * enum dcbnl_attrs - DCB top-level netlink attributes + * + * @DCB_ATTR_UNDEFINED: unspecified attribute to catch errors + * @DCB_ATTR_IFNAME: interface name of the underlying device (NLA_STRING) + * @DCB_ATTR_STATE: enable state of DCB in the device (NLA_U8) + * @DCB_ATTR_PFC_STATE: enable state of PFC in the device (NLA_U8) + * @DCB_ATTR_PFC_CFG: priority flow control configuration (NLA_NESTED) + * @DCB_ATTR_NUM_TC: number of traffic classes supported in the device (NLA_U8) + * @DCB_ATTR_PG_CFG: priority group configuration (NLA_NESTED) + * @DCB_ATTR_SET_ALL: bool to commit changes to hardware or not (NLA_U8) + * @DCB_ATTR_PERM_HWADDR: MAC address of the physical device (NLA_NESTED) + * @DCB_ATTR_CAP: DCB capabilities of the device (NLA_NESTED) + * @DCB_ATTR_NUMTCS: number of traffic classes supported (NLA_NESTED) + * @DCB_ATTR_BCN: backward congestion notification configuration (NLA_NESTED) + */ +enum dcbnl_attrs { + DCB_ATTR_UNDEFINED, + + DCB_ATTR_IFNAME, + DCB_ATTR_STATE, + DCB_ATTR_PFC_STATE, + DCB_ATTR_PFC_CFG, + DCB_ATTR_NUM_TC, + DCB_ATTR_PG_CFG, + DCB_ATTR_SET_ALL, + DCB_ATTR_PERM_HWADDR, + DCB_ATTR_CAP, + DCB_ATTR_NUMTCS, + DCB_ATTR_BCN, + + __DCB_ATTR_ENUM_MAX, + DCB_ATTR_MAX = __DCB_ATTR_ENUM_MAX - 1, +}; + +/** + * enum dcbnl_pfc_attrs - DCB Priority Flow Control user priority nested attrs + * + * @DCB_PFC_UP_ATTR_UNDEFINED: unspecified attribute to catch errors + * @DCB_PFC_UP_ATTR_0: Priority Flow Control value for User Priority 0 (NLA_U8) + * @DCB_PFC_UP_ATTR_1: Priority Flow Control value for User Priority 1 (NLA_U8) + * @DCB_PFC_UP_ATTR_2: Priority Flow Control value for User Priority 2 (NLA_U8) + * @DCB_PFC_UP_ATTR_3: Priority Flow Control value for User Priority 3 (NLA_U8) + * @DCB_PFC_UP_ATTR_4: Priority Flow Control value for User Priority 4 (NLA_U8) + * @DCB_PFC_UP_ATTR_5: Priority Flow Control value for User Priority 5 (NLA_U8) + * @DCB_PFC_UP_ATTR_6: Priority Flow Control value for User Priority 6 (NLA_U8) + * @DCB_PFC_UP_ATTR_7: Priority Flow Control value for User Priority 7 (NLA_U8) + * @DCB_PFC_UP_ATTR_MAX: highest attribute number currently defined + * @DCB_PFC_UP_ATTR_ALL: apply to all priority flow control attrs (NLA_FLAG) + * + */ +enum dcbnl_pfc_up_attrs { + DCB_PFC_UP_ATTR_UNDEFINED, + + DCB_PFC_UP_ATTR_0, + DCB_PFC_UP_ATTR_1, + DCB_PFC_UP_ATTR_2, + DCB_PFC_UP_ATTR_3, + DCB_PFC_UP_ATTR_4, + DCB_PFC_UP_ATTR_5, + DCB_PFC_UP_ATTR_6, + DCB_PFC_UP_ATTR_7, + DCB_PFC_UP_ATTR_ALL, + + __DCB_PFC_UP_ATTR_ENUM_MAX, + DCB_PFC_UP_ATTR_MAX = __DCB_PFC_UP_ATTR_ENUM_MAX - 1, +}; + +/** + * enum dcbnl_pg_attrs - DCB Priority Group attributes + * + * @DCB_PG_ATTR_UNDEFINED: unspecified attribute to catch errors + * @DCB_PG_ATTR_TC_0: Priority Group Traffic Class 0 configuration (NLA_NESTED) + * @DCB_PG_ATTR_TC_1: Priority Group Traffic Class 1 configuration (NLA_NESTED) + * @DCB_PG_ATTR_TC_2: Priority Group Traffic Class 2 configuration (NLA_NESTED) + * @DCB_PG_ATTR_TC_3: Priority Group Traffic Class 3 configuration (NLA_NESTED) + * @DCB_PG_ATTR_TC_4: Priority Group Traffic Class 4 configuration (NLA_NESTED) + * @DCB_PG_ATTR_TC_5: Priority Group Traffic Class 5 configuration (NLA_NESTED) + * @DCB_PG_ATTR_TC_6: Priority Group Traffic Class 6 configuration (NLA_NESTED) + * @DCB_PG_ATTR_TC_7: Priority Group Traffic Class 7 configuration (NLA_NESTED) + * @DCB_PG_ATTR_TC_MAX: highest attribute number currently defined + * @DCB_PG_ATTR_TC_ALL: apply to all traffic classes (NLA_NESTED) + * @DCB_PG_ATTR_BW_ID_0: Percent of link bandwidth for Priority Group 0 (NLA_U8) + * @DCB_PG_ATTR_BW_ID_1: Percent of link bandwidth for Priority Group 1 (NLA_U8) + * @DCB_PG_ATTR_BW_ID_2: Percent of link bandwidth for Priority Group 2 (NLA_U8) + * @DCB_PG_ATTR_BW_ID_3: Percent of link bandwidth for Priority Group 3 (NLA_U8) + * @DCB_PG_ATTR_BW_ID_4: Percent of link bandwidth for Priority Group 4 (NLA_U8) + * @DCB_PG_ATTR_BW_ID_5: Percent of link bandwidth for Priority Group 5 (NLA_U8) + * @DCB_PG_ATTR_BW_ID_6: Percent of link bandwidth for Priority Group 6 (NLA_U8) + * @DCB_PG_ATTR_BW_ID_7: Percent of link bandwidth for Priority Group 7 (NLA_U8) + * @DCB_PG_ATTR_BW_ID_MAX: highest attribute number currently defined + * @DCB_PG_ATTR_BW_ID_ALL: apply to all priority groups (NLA_FLAG) + * + */ +enum dcbnl_pg_attrs { + DCB_PG_ATTR_UNDEFINED, + + DCB_PG_ATTR_TC_0, + DCB_PG_ATTR_TC_1, + DCB_PG_ATTR_TC_2, + DCB_PG_ATTR_TC_3, + DCB_PG_ATTR_TC_4, + DCB_PG_ATTR_TC_5, + DCB_PG_ATTR_TC_6, + DCB_PG_ATTR_TC_7, + DCB_PG_ATTR_TC_MAX, + DCB_PG_ATTR_TC_ALL, + + DCB_PG_ATTR_BW_ID_0, + DCB_PG_ATTR_BW_ID_1, + DCB_PG_ATTR_BW_ID_2, + DCB_PG_ATTR_BW_ID_3, + DCB_PG_ATTR_BW_ID_4, + DCB_PG_ATTR_BW_ID_5, + DCB_PG_ATTR_BW_ID_6, + DCB_PG_ATTR_BW_ID_7, + DCB_PG_ATTR_BW_ID_MAX, + DCB_PG_ATTR_BW_ID_ALL, + + __DCB_PG_ATTR_ENUM_MAX, + DCB_PG_ATTR_MAX = __DCB_PG_ATTR_ENUM_MAX - 1, +}; + +/** + * enum dcbnl_tc_attrs - DCB Traffic Class attributes + * + * @DCB_TC_ATTR_PARAM_UNDEFINED: unspecified attribute to catch errors + * @DCB_TC_ATTR_PARAM_PGID: (NLA_U8) Priority group the traffic class belongs to + * Valid values are: 0-7 + * @DCB_TC_ATTR_PARAM_UP_MAPPING: (NLA_U8) Traffic class to user priority map + * Some devices may not support changing the + * user priority map of a TC. + * @DCB_TC_ATTR_PARAM_STRICT_PRIO: (NLA_U8) Strict priority setting + * 0 - none + * 1 - group strict + * 2 - link strict + * @DCB_TC_ATTR_PARAM_BW_PCT: optional - (NLA_U8) If supported by the device and + * not configured to use link strict priority, + * this is the percentage of bandwidth of the + * priority group this traffic class belongs to + * @DCB_TC_ATTR_PARAM_ALL: (NLA_FLAG) all traffic class parameters + * + */ +enum dcbnl_tc_attrs { + DCB_TC_ATTR_PARAM_UNDEFINED, + + DCB_TC_ATTR_PARAM_PGID, + DCB_TC_ATTR_PARAM_UP_MAPPING, + DCB_TC_ATTR_PARAM_STRICT_PRIO, + DCB_TC_ATTR_PARAM_BW_PCT, + DCB_TC_ATTR_PARAM_ALL, + + __DCB_TC_ATTR_PARAM_ENUM_MAX, + DCB_TC_ATTR_PARAM_MAX = __DCB_TC_ATTR_PARAM_ENUM_MAX - 1, +}; + +/** + * enum dcbnl_cap_attrs - DCB Capability attributes + * + * @DCB_CAP_ATTR_UNDEFINED: unspecified attribute to catch errors + * @DCB_CAP_ATTR_ALL: (NLA_FLAG) all capability parameters + * @DCB_CAP_ATTR_PG: (NLA_U8) device supports Priority Groups + * @DCB_CAP_ATTR_PFC: (NLA_U8) device supports Priority Flow Control + * @DCB_CAP_ATTR_UP2TC: (NLA_U8) device supports user priority to + * traffic class mapping + * @DCB_CAP_ATTR_PG_TCS: (NLA_U8) bitmap where each bit represents a + * number of traffic classes the device + * can be configured to use for Priority Groups + * @DCB_CAP_ATTR_PFC_TCS: (NLA_U8) bitmap where each bit represents a + * number of traffic classes the device can be + * configured to use for Priority Flow Control + * @DCB_CAP_ATTR_GSP: (NLA_U8) device supports group strict priority + * @DCB_CAP_ATTR_BCN: (NLA_U8) device supports Backwards Congestion + * Notification + */ +enum dcbnl_cap_attrs { + DCB_CAP_ATTR_UNDEFINED, + DCB_CAP_ATTR_ALL, + DCB_CAP_ATTR_PG, + DCB_CAP_ATTR_PFC, + DCB_CAP_ATTR_UP2TC, + DCB_CAP_ATTR_PG_TCS, + DCB_CAP_ATTR_PFC_TCS, + DCB_CAP_ATTR_GSP, + DCB_CAP_ATTR_BCN, + + __DCB_CAP_ATTR_ENUM_MAX, + DCB_CAP_ATTR_MAX = __DCB_CAP_ATTR_ENUM_MAX - 1, +}; + +/** + * enum dcbnl_numtcs_attrs - number of traffic classes + * + * @DCB_NUMTCS_ATTR_UNDEFINED: unspecified attribute to catch errors + * @DCB_NUMTCS_ATTR_ALL: (NLA_FLAG) all traffic class attributes + * @DCB_NUMTCS_ATTR_PG: (NLA_U8) number of traffic classes used for + * priority groups + * @DCB_NUMTCS_ATTR_PFC: (NLA_U8) number of traffic classes which can + * support priority flow control + */ +enum dcbnl_numtcs_attrs { + DCB_NUMTCS_ATTR_UNDEFINED, + DCB_NUMTCS_ATTR_ALL, + DCB_NUMTCS_ATTR_PG, + DCB_NUMTCS_ATTR_PFC, + + __DCB_NUMTCS_ATTR_ENUM_MAX, + DCB_NUMTCS_ATTR_MAX = __DCB_NUMTCS_ATTR_ENUM_MAX - 1, +}; + +enum dcbnl_bcn_attrs{ + DCB_BCN_ATTR_UNDEFINED = 0, + + DCB_BCN_ATTR_RP_0, + DCB_BCN_ATTR_RP_1, + DCB_BCN_ATTR_RP_2, + DCB_BCN_ATTR_RP_3, + DCB_BCN_ATTR_RP_4, + DCB_BCN_ATTR_RP_5, + DCB_BCN_ATTR_RP_6, + DCB_BCN_ATTR_RP_7, + DCB_BCN_ATTR_RP_ALL, + + DCB_BCN_ATTR_ALPHA, + DCB_BCN_ATTR_BETA, + DCB_BCN_ATTR_GD, + DCB_BCN_ATTR_GI, + DCB_BCN_ATTR_TMAX, + DCB_BCN_ATTR_TD, + DCB_BCN_ATTR_RMIN, + DCB_BCN_ATTR_W, + DCB_BCN_ATTR_RD, + DCB_BCN_ATTR_RU, + DCB_BCN_ATTR_WRTT, + DCB_BCN_ATTR_RI, + DCB_BCN_ATTR_C, + DCB_BCN_ATTR_ALL, + + __DCB_BCN_ATTR_ENUM_MAX, + DCB_BCN_ATTR_MAX = __DCB_BCN_ATTR_ENUM_MAX - 1, +}; + +/** + * enum dcb_general_attr_values - general DCB attribute values + * + * @DCB_ATTR_UNDEFINED: value used to indicate an attribute is not supported + * + */ +enum dcb_general_attr_values { + DCB_ATTR_VALUE_UNDEFINED = 0xff +}; + + +#endif /* __LINUX_DCBNL_H__ */ diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 6080449fbec9..6a72ff52a8a4 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -168,6 +168,8 @@ enum { DCCPO_MIN_CCID_SPECIFIC = 128, DCCPO_MAX_CCID_SPECIFIC = 255, }; +/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */ +#define DCCP_SINGLE_OPT_MAXLEN 253 /* DCCP CCIDS */ enum { @@ -176,29 +178,23 @@ enum { }; /* DCCP features (RFC 4340 section 6.4) */ -enum { +enum dccp_feature_numbers { DCCPF_RESERVED = 0, DCCPF_CCID = 1, - DCCPF_SHORT_SEQNOS = 2, /* XXX: not yet implemented */ + DCCPF_SHORT_SEQNOS = 2, DCCPF_SEQUENCE_WINDOW = 3, - DCCPF_ECN_INCAPABLE = 4, /* XXX: not yet implemented */ + DCCPF_ECN_INCAPABLE = 4, DCCPF_ACK_RATIO = 5, DCCPF_SEND_ACK_VECTOR = 6, DCCPF_SEND_NDP_COUNT = 7, DCCPF_MIN_CSUM_COVER = 8, - DCCPF_DATA_CHECKSUM = 9, /* XXX: not yet implemented */ + DCCPF_DATA_CHECKSUM = 9, /* 10-127 reserved */ DCCPF_MIN_CCID_SPECIFIC = 128, + DCCPF_SEND_LEV_RATE = 192, /* RFC 4342, sec. 8.4 */ DCCPF_MAX_CCID_SPECIFIC = 255, }; -/* this structure is argument to DCCP_SOCKOPT_CHANGE_X */ -struct dccp_so_feat { - __u8 dccpsf_feat; - __u8 __user *dccpsf_val; - __u8 dccpsf_len; -}; - /* DCCP socket options */ #define DCCP_SOCKOPT_PACKET_SIZE 1 /* XXX deprecated, without effect */ #define DCCP_SOCKOPT_SERVICE 2 @@ -208,6 +204,10 @@ struct dccp_so_feat { #define DCCP_SOCKOPT_SERVER_TIMEWAIT 6 #define DCCP_SOCKOPT_SEND_CSCOV 10 #define DCCP_SOCKOPT_RECV_CSCOV 11 +#define DCCP_SOCKOPT_AVAILABLE_CCIDS 12 +#define DCCP_SOCKOPT_CCID 13 +#define DCCP_SOCKOPT_TX_CCID 14 +#define DCCP_SOCKOPT_RX_CCID 15 #define DCCP_SOCKOPT_CCID_RX_INFO 128 #define DCCP_SOCKOPT_CCID_TX_INFO 192 @@ -373,7 +373,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) * @dccpms_ccid - Congestion Control Id (CCID) (section 10) * @dccpms_send_ack_vector - Send Ack Vector Feature (section 11.5) * @dccpms_send_ndp_count - Send NDP Count Feature (7.7.2) - * @dccpms_ack_ratio - Ack Ratio Feature (section 11.3) * @dccpms_pending - List of features being negotiated * @dccpms_conf - */ @@ -383,7 +382,6 @@ struct dccp_minisock { __u8 dccpms_tx_ccid; __u8 dccpms_send_ack_vector; __u8 dccpms_send_ndp_count; - __u8 dccpms_ack_ratio; struct list_head dccpms_pending; struct list_head dccpms_conf; }; @@ -411,6 +409,7 @@ extern void dccp_minisock_init(struct dccp_minisock *dmsk); * @dreq_iss: initial sequence number sent on the Response (RFC 4340, 7.1) * @dreq_isr: initial sequence number received on the Request * @dreq_service: service code present on the Request (there is just one) + * @dreq_featneg: feature negotiation options for this connection * The following two fields are analogous to the ones in dccp_sock: * @dreq_timestamp_echo: last received timestamp to echo (13.1) * @dreq_timestamp_echo: the time of receiving the last @dreq_timestamp_echo @@ -420,6 +419,7 @@ struct dccp_request_sock { __u64 dreq_iss; __u64 dreq_isr; __be32 dreq_service; + struct list_head dreq_featneg; __u32 dreq_timestamp_echo; __u32 dreq_timestamp_time; }; @@ -497,6 +497,7 @@ struct dccp_ackvec; * @dccps_mss_cache - current value of MSS (path MTU minus header sizes) * @dccps_rate_last - timestamp for rate-limiting DCCP-Sync (RFC 4340, 7.5.4) * @dccps_minisock - associated minisock (accessed via dccp_msk) + * @dccps_featneg - tracks feature-negotiation state (mostly during handshake) * @dccps_hc_rx_ackvec - rx half connection ack vector * @dccps_hc_rx_ccid - CCID used for the receiver (or receiving half-connection) * @dccps_hc_tx_ccid - CCID used for the sender (or sending half-connection) @@ -529,11 +530,12 @@ struct dccp_sock { __u32 dccps_timestamp_time; __u16 dccps_l_ack_ratio; __u16 dccps_r_ack_ratio; - __u16 dccps_pcslen; - __u16 dccps_pcrlen; + __u8 dccps_pcslen:4; + __u8 dccps_pcrlen:4; __u64 dccps_ndp_count:48; unsigned long dccps_rate_last; struct dccp_minisock dccps_minisock; + struct list_head dccps_featneg; struct dccp_ackvec *dccps_hc_rx_ackvec; struct ccid *dccps_hc_rx_ccid; struct ccid *dccps_hc_tx_ccid; diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h index 25d62e6e3290..1cb0f0b90926 100644 --- a/include/linux/etherdevice.h +++ b/include/linux/etherdevice.h @@ -27,6 +27,7 @@ #include <linux/if_ether.h> #include <linux/netdevice.h> #include <linux/random.h> +#include <asm/unaligned.h> #ifdef __KERNEL__ extern __be16 eth_type_trans(struct sk_buff *skb, struct net_device *dev); @@ -41,6 +42,10 @@ extern int eth_header_cache(const struct neighbour *neigh, struct hh_cache *hh); extern void eth_header_cache_update(struct hh_cache *hh, const struct net_device *dev, const unsigned char *haddr); +extern int eth_mac_addr(struct net_device *dev, void *p); +extern int eth_change_mtu(struct net_device *dev, int new_mtu); +extern int eth_validate_addr(struct net_device *dev); + extern struct net_device *alloc_etherdev_mq(int sizeof_priv, unsigned int queue_count); @@ -136,6 +141,47 @@ static inline unsigned compare_ether_addr(const u8 *addr1, const u8 *addr2) BUILD_BUG_ON(ETH_ALEN != 6); return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) != 0; } + +static inline unsigned long zap_last_2bytes(unsigned long value) +{ +#ifdef __BIG_ENDIAN + return value >> 16; +#else + return value << 16; +#endif +} + +/** + * compare_ether_addr_64bits - Compare two Ethernet addresses + * @addr1: Pointer to an array of 8 bytes + * @addr2: Pointer to an other array of 8 bytes + * + * Compare two ethernet addresses, returns 0 if equal. + * Same result than "memcmp(addr1, addr2, ETH_ALEN)" but without conditional + * branches, and possibly long word memory accesses on CPU allowing cheap + * unaligned memory reads. + * arrays = { byte1, byte2, byte3, byte4, byte6, byte7, pad1, pad2} + * + * Please note that alignment of addr1 & addr2 is only guaranted to be 16 bits. + */ + +static inline unsigned compare_ether_addr_64bits(const u8 addr1[6+2], + const u8 addr2[6+2]) +{ +#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS + unsigned long fold = ((*(unsigned long *)addr1) ^ + (*(unsigned long *)addr2)); + + if (sizeof(fold) == 8) + return zap_last_2bytes(fold) != 0; + + fold |= zap_last_2bytes((*(unsigned long *)(addr1 + 4)) ^ + (*(unsigned long *)(addr2 + 4))); + return fold != 0; +#else + return compare_ether_addr(addr1, addr2); +#endif +} #endif /* __KERNEL__ */ #endif /* _LINUX_ETHERDEVICE_H */ diff --git a/include/linux/fddidevice.h b/include/linux/fddidevice.h index e61e42dfd317..155bafd9e886 100644 --- a/include/linux/fddidevice.h +++ b/include/linux/fddidevice.h @@ -27,6 +27,7 @@ #ifdef __KERNEL__ extern __be16 fddi_type_trans(struct sk_buff *skb, struct net_device *dev); +extern int fddi_change_mtu(struct net_device *dev, int new_mtu); extern struct net_device *alloc_fddidev(int sizeof_priv); #endif diff --git a/include/linux/filter.h b/include/linux/filter.h index b6ea9aa9e853..1354aaf6abbe 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -122,7 +122,8 @@ struct sock_fprog /* Required for SO_ATTACH_FILTER. */ #define SKF_AD_PKTTYPE 4 #define SKF_AD_IFINDEX 8 #define SKF_AD_NLATTR 12 -#define SKF_AD_MAX 16 +#define SKF_AD_NLATTR_NEST 16 +#define SKF_AD_MAX 20 #define SKF_NET_OFF (-0x100000) #define SKF_LL_OFF (-0x200000) diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h index c59769693bee..e960faac609d 100644 --- a/include/linux/hdlc.h +++ b/include/linux/hdlc.h @@ -80,7 +80,7 @@ struct net_device *alloc_hdlcdev(void *priv); static inline struct hdlc_device* dev_to_hdlc(struct net_device *dev) { - return dev->priv; + return netdev_priv(dev); } static __inline__ void debug_frame(const struct sk_buff *skb) diff --git a/include/linux/hippidevice.h b/include/linux/hippidevice.h index bab303dafd6e..f148e4908410 100644 --- a/include/linux/hippidevice.h +++ b/include/linux/hippidevice.h @@ -32,7 +32,9 @@ struct hippi_cb { }; extern __be16 hippi_type_trans(struct sk_buff *skb, struct net_device *dev); - +extern int hippi_change_mtu(struct net_device *dev, int new_mtu); +extern int hippi_mac_addr(struct net_device *dev, void *p); +extern int hippi_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p); extern struct net_device *alloc_hippi_dev(int sizeof_priv); #endif diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 14126bc36641..a6ec928186ad 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -12,8 +12,8 @@ * published by the Free Software Foundation. */ -#ifndef IEEE80211_H -#define IEEE80211_H +#ifndef LINUX_IEEE80211_H +#define LINUX_IEEE80211_H #include <linux/types.h> #include <asm/byteorder.h> @@ -97,7 +97,10 @@ #define IEEE80211_MAX_FRAME_LEN 2352 #define IEEE80211_MAX_SSID_LEN 32 + #define IEEE80211_MAX_MESH_ID_LEN 32 +#define IEEE80211_MESH_CONFIG_LEN 19 + #define IEEE80211_QOS_CTL_LEN 2 #define IEEE80211_QOS_CTL_TID_MASK 0x000F #define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007 @@ -666,6 +669,13 @@ struct ieee80211_cts { u8 ra[6]; } __attribute__ ((packed)); +struct ieee80211_pspoll { + __le16 frame_control; + __le16 aid; + u8 bssid[6]; + u8 ta[6]; +} __attribute__ ((packed)); + /** * struct ieee80211_bar - HT Block Ack Request * @@ -685,28 +695,88 @@ struct ieee80211_bar { #define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000 #define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004 + +#define IEEE80211_HT_MCS_MASK_LEN 10 + +/** + * struct ieee80211_mcs_info - MCS information + * @rx_mask: RX mask + * @rx_highest: highest supported RX rate + * @tx_params: TX parameters + */ +struct ieee80211_mcs_info { + u8 rx_mask[IEEE80211_HT_MCS_MASK_LEN]; + __le16 rx_highest; + u8 tx_params; + u8 reserved[3]; +} __attribute__((packed)); + +/* 802.11n HT capability MSC set */ +#define IEEE80211_HT_MCS_RX_HIGHEST_MASK 0x3ff +#define IEEE80211_HT_MCS_TX_DEFINED 0x01 +#define IEEE80211_HT_MCS_TX_RX_DIFF 0x02 +/* value 0 == 1 stream etc */ +#define IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK 0x0C +#define IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT 2 +#define IEEE80211_HT_MCS_TX_MAX_STREAMS 4 +#define IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION 0x10 + +/* + * 802.11n D5.0 20.3.5 / 20.6 says: + * - indices 0 to 7 and 32 are single spatial stream + * - 8 to 31 are multiple spatial streams using equal modulation + * [8..15 for two streams, 16..23 for three and 24..31 for four] + * - remainder are multiple spatial streams using unequal modulation + */ +#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START 33 +#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE \ + (IEEE80211_HT_MCS_UNEQUAL_MODULATION_START / 8) + /** * struct ieee80211_ht_cap - HT capabilities * - * This structure refers to "HT capabilities element" as - * described in 802.11n draft section 7.3.2.52 + * This structure is the "HT capabilities element" as + * described in 802.11n D5.0 7.3.2.57 */ struct ieee80211_ht_cap { __le16 cap_info; u8 ampdu_params_info; - u8 supp_mcs_set[16]; + + /* 16 bytes MCS information */ + struct ieee80211_mcs_info mcs; + __le16 extended_ht_cap_info; __le32 tx_BF_cap_info; u8 antenna_selection_info; } __attribute__ ((packed)); +/* 802.11n HT capabilities masks (for cap_info) */ +#define IEEE80211_HT_CAP_LDPC_CODING 0x0001 +#define IEEE80211_HT_CAP_SUP_WIDTH_20_40 0x0002 +#define IEEE80211_HT_CAP_SM_PS 0x000C +#define IEEE80211_HT_CAP_GRN_FLD 0x0010 +#define IEEE80211_HT_CAP_SGI_20 0x0020 +#define IEEE80211_HT_CAP_SGI_40 0x0040 +#define IEEE80211_HT_CAP_TX_STBC 0x0080 +#define IEEE80211_HT_CAP_RX_STBC 0x0300 +#define IEEE80211_HT_CAP_DELAY_BA 0x0400 +#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 +#define IEEE80211_HT_CAP_DSSSCCK40 0x1000 +#define IEEE80211_HT_CAP_PSMP_SUPPORT 0x2000 +#define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000 +#define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000 + +/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */ +#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03 +#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C + /** - * struct ieee80211_ht_cap - HT additional information + * struct ieee80211_ht_info - HT information * - * This structure refers to "HT information element" as - * described in 802.11n draft section 7.3.2.53 + * This structure is the "HT information element" as + * described in 802.11n D5.0 7.3.2.58 */ -struct ieee80211_ht_addt_info { +struct ieee80211_ht_info { u8 control_chan; u8 ht_param; __le16 operation_mode; @@ -714,36 +784,33 @@ struct ieee80211_ht_addt_info { u8 basic_set[16]; } __attribute__ ((packed)); -/* 802.11n HT capabilities masks */ -#define IEEE80211_HT_CAP_SUP_WIDTH 0x0002 -#define IEEE80211_HT_CAP_SM_PS 0x000C -#define IEEE80211_HT_CAP_GRN_FLD 0x0010 -#define IEEE80211_HT_CAP_SGI_20 0x0020 -#define IEEE80211_HT_CAP_SGI_40 0x0040 -#define IEEE80211_HT_CAP_DELAY_BA 0x0400 -#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 -#define IEEE80211_HT_CAP_DSSSCCK40 0x1000 -/* 802.11n HT capability AMPDU settings */ -#define IEEE80211_HT_CAP_AMPDU_FACTOR 0x03 -#define IEEE80211_HT_CAP_AMPDU_DENSITY 0x1C -/* 802.11n HT capability MSC set */ -#define IEEE80211_SUPP_MCS_SET_UEQM 4 -#define IEEE80211_HT_CAP_MAX_STREAMS 4 -#define IEEE80211_SUPP_MCS_SET_LEN 10 -/* maximum streams the spec allows */ -#define IEEE80211_HT_CAP_MCS_TX_DEFINED 0x01 -#define IEEE80211_HT_CAP_MCS_TX_RX_DIFF 0x02 -#define IEEE80211_HT_CAP_MCS_TX_STREAMS 0x0C -#define IEEE80211_HT_CAP_MCS_TX_UEQM 0x10 -/* 802.11n HT IE masks */ -#define IEEE80211_HT_IE_CHA_SEC_OFFSET 0x03 -#define IEEE80211_HT_IE_CHA_SEC_NONE 0x00 -#define IEEE80211_HT_IE_CHA_SEC_ABOVE 0x01 -#define IEEE80211_HT_IE_CHA_SEC_BELOW 0x03 -#define IEEE80211_HT_IE_CHA_WIDTH 0x04 -#define IEEE80211_HT_IE_HT_PROTECTION 0x0003 -#define IEEE80211_HT_IE_NON_GF_STA_PRSNT 0x0004 -#define IEEE80211_HT_IE_NON_HT_STA_PRSNT 0x0010 +/* for ht_param */ +#define IEEE80211_HT_PARAM_CHA_SEC_OFFSET 0x03 +#define IEEE80211_HT_PARAM_CHA_SEC_NONE 0x00 +#define IEEE80211_HT_PARAM_CHA_SEC_ABOVE 0x01 +#define IEEE80211_HT_PARAM_CHA_SEC_BELOW 0x03 +#define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY 0x04 +#define IEEE80211_HT_PARAM_RIFS_MODE 0x08 +#define IEEE80211_HT_PARAM_SPSMP_SUPPORT 0x10 +#define IEEE80211_HT_PARAM_SERV_INTERVAL_GRAN 0xE0 + +/* for operation_mode */ +#define IEEE80211_HT_OP_MODE_PROTECTION 0x0003 +#define IEEE80211_HT_OP_MODE_PROTECTION_NONE 0 +#define IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER 1 +#define IEEE80211_HT_OP_MODE_PROTECTION_20MHZ 2 +#define IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED 3 +#define IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT 0x0004 +#define IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT 0x0010 + +/* for stbc_param */ +#define IEEE80211_HT_STBC_PARAM_DUAL_BEACON 0x0040 +#define IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT 0x0080 +#define IEEE80211_HT_STBC_PARAM_STBC_BEACON 0x0100 +#define IEEE80211_HT_STBC_PARAM_LSIG_TXOP_FULLPROT 0x0200 +#define IEEE80211_HT_STBC_PARAM_PCO_ACTIVE 0x0400 +#define IEEE80211_HT_STBC_PARAM_PCO_PHASE 0x0800 + /* block-ack parameters */ #define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002 @@ -769,8 +836,7 @@ struct ieee80211_ht_addt_info { /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 #define WLAN_AUTH_SHARED_KEY 1 -#define WLAN_AUTH_FAST_BSS_TRANSITION 2 -#define WLAN_AUTH_LEAP 128 +#define WLAN_AUTH_LEAP 2 #define WLAN_AUTH_CHALLENGE_LEN 128 @@ -949,7 +1015,7 @@ enum ieee80211_eid { WLAN_EID_EXT_SUPP_RATES = 50, /* 802.11n */ WLAN_EID_HT_CAPABILITY = 45, - WLAN_EID_HT_EXTRA_INFO = 61, + WLAN_EID_HT_INFORMATION = 61, /* 802.11i */ WLAN_EID_RSN = 48, WLAN_EID_WPA = 221, @@ -976,6 +1042,68 @@ enum ieee80211_spectrum_mgmt_actioncode { WLAN_ACTION_SPCT_CHL_SWITCH = 4, }; +/* + * IEEE 802.11-2007 7.3.2.9 Country information element + * + * Minimum length is 8 octets, ie len must be evenly + * divisible by 2 + */ + +/* Although the spec says 8 I'm seeing 6 in practice */ +#define IEEE80211_COUNTRY_IE_MIN_LEN 6 + +/* + * For regulatory extension stuff see IEEE 802.11-2007 + * Annex I (page 1141) and Annex J (page 1147). Also + * review 7.3.2.9. + * + * When dot11RegulatoryClassesRequired is true and the + * first_channel/reg_extension_id is >= 201 then the IE + * compromises of the 'ext' struct represented below: + * + * - Regulatory extension ID - when generating IE this just needs + * to be monotonically increasing for each triplet passed in + * the IE + * - Regulatory class - index into set of rules + * - Coverage class - index into air propagation time (Table 7-27), + * in microseconds, you can compute the air propagation time from + * the index by multiplying by 3, so index 10 yields a propagation + * of 10 us. Valid values are 0-31, values 32-255 are not defined + * yet. A value of 0 inicates air propagation of <= 1 us. + * + * See also Table I.2 for Emission limit sets and table + * I.3 for Behavior limit sets. Table J.1 indicates how to map + * a reg_class to an emission limit set and behavior limit set. + */ +#define IEEE80211_COUNTRY_EXTENSION_ID 201 + +/* + * Channels numbers in the IE must be monotonically increasing + * if dot11RegulatoryClassesRequired is not true. + * + * If dot11RegulatoryClassesRequired is true consecutive + * subband triplets following a regulatory triplet shall + * have monotonically increasing first_channel number fields. + * + * Channel numbers shall not overlap. + * + * Note that max_power is signed. + */ +struct ieee80211_country_ie_triplet { + union { + struct { + u8 first_channel; + u8 num_channels; + s8 max_power; + } __attribute__ ((packed)) chans; + struct { + u8 reg_extension_id; + u8 reg_class; + u8 coverage_class; + } __attribute__ ((packed)) ext; + }; +} __attribute__ ((packed)); + /* BACK action code */ enum ieee80211_back_actioncode { WLAN_ACTION_ADDBA_REQ = 0, @@ -1057,4 +1185,4 @@ static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr) return hdr->addr1; } -#endif /* IEEE80211_H */ +#endif /* LINUX_IEEE80211_H */ diff --git a/include/linux/if.h b/include/linux/if.h index 65246846c844..2a6e29620a96 100644 --- a/include/linux/if.h +++ b/include/linux/if.h @@ -65,6 +65,7 @@ #define IFF_BONDING 0x20 /* bonding master or slave */ #define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */ #define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */ +#define IFF_MASTER_ARPMON 0x100 /* bonding master, ARP mon in use */ #define IF_GET_IFACE 0x0001 /* for querying only */ #define IF_GET_PROTO 0x0002 diff --git a/include/linux/in.h b/include/linux/in.h index db458beef19d..d60122a3a088 100644 --- a/include/linux/in.h +++ b/include/linux/in.h @@ -80,6 +80,10 @@ struct in_addr { /* BSD compatibility */ #define IP_RECVRETOPTS IP_RETOPTS +/* TProxy original addresses */ +#define IP_ORIGDSTADDR 20 +#define IP_RECVORIGDSTADDR IP_ORIGDSTADDR + /* IP_MTU_DISCOVER values */ #define IP_PMTUDISC_DONT 0 /* Never send DF frames */ #define IP_PMTUDISC_WANT 1 /* Use per route hints */ diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 269df5a17b30..ca9ff6411dfa 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -372,18 +372,6 @@ static inline char *pack_hex_byte(char *buf, u8 byte) ((unsigned char *)&addr)[3] #define NIPQUAD_FMT "%u.%u.%u.%u" -#define NIP6(addr) \ - ntohs((addr).s6_addr16[0]), \ - ntohs((addr).s6_addr16[1]), \ - ntohs((addr).s6_addr16[2]), \ - ntohs((addr).s6_addr16[3]), \ - ntohs((addr).s6_addr16[4]), \ - ntohs((addr).s6_addr16[5]), \ - ntohs((addr).s6_addr16[6]), \ - ntohs((addr).s6_addr16[7]) -#define NIP6_FMT "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x" -#define NIP6_SEQFMT "%04x%04x%04x%04x%04x%04x%04x%04x" - #if defined(__LITTLE_ENDIAN) #define HIPQUAD(addr) \ ((unsigned char *)&addr)[3], \ diff --git a/include/linux/list_nulls.h b/include/linux/list_nulls.h new file mode 100644 index 000000000000..93150ecf3ea4 --- /dev/null +++ b/include/linux/list_nulls.h @@ -0,0 +1,94 @@ +#ifndef _LINUX_LIST_NULLS_H +#define _LINUX_LIST_NULLS_H + +/* + * Special version of lists, where end of list is not a NULL pointer, + * but a 'nulls' marker, which can have many different values. + * (up to 2^31 different values guaranteed on all platforms) + * + * In the standard hlist, termination of a list is the NULL pointer. + * In this special 'nulls' variant, we use the fact that objects stored in + * a list are aligned on a word (4 or 8 bytes alignment). + * We therefore use the last significant bit of 'ptr' : + * Set to 1 : This is a 'nulls' end-of-list marker (ptr >> 1) + * Set to 0 : This is a pointer to some object (ptr) + */ + +struct hlist_nulls_head { + struct hlist_nulls_node *first; +}; + +struct hlist_nulls_node { + struct hlist_nulls_node *next, **pprev; +}; +#define INIT_HLIST_NULLS_HEAD(ptr, nulls) \ + ((ptr)->first = (struct hlist_nulls_node *) (1UL | (((long)nulls) << 1))) + +#define hlist_nulls_entry(ptr, type, member) container_of(ptr,type,member) +/** + * ptr_is_a_nulls - Test if a ptr is a nulls + * @ptr: ptr to be tested + * + */ +static inline int is_a_nulls(const struct hlist_nulls_node *ptr) +{ + return ((unsigned long)ptr & 1); +} + +/** + * get_nulls_value - Get the 'nulls' value of the end of chain + * @ptr: end of chain + * + * Should be called only if is_a_nulls(ptr); + */ +static inline unsigned long get_nulls_value(const struct hlist_nulls_node *ptr) +{ + return ((unsigned long)ptr) >> 1; +} + +static inline int hlist_nulls_unhashed(const struct hlist_nulls_node *h) +{ + return !h->pprev; +} + +static inline int hlist_nulls_empty(const struct hlist_nulls_head *h) +{ + return is_a_nulls(h->first); +} + +static inline void __hlist_nulls_del(struct hlist_nulls_node *n) +{ + struct hlist_nulls_node *next = n->next; + struct hlist_nulls_node **pprev = n->pprev; + *pprev = next; + if (!is_a_nulls(next)) + next->pprev = pprev; +} + +/** + * hlist_nulls_for_each_entry - iterate over list of given type + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the hlist_node within the struct. + * + */ +#define hlist_nulls_for_each_entry(tpos, pos, head, member) \ + for (pos = (head)->first; \ + (!is_a_nulls(pos)) && \ + ({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1;}); \ + pos = pos->next) + +/** + * hlist_nulls_for_each_entry_from - iterate over a hlist continuing from current point + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @member: the name of the hlist_node within the struct. + * + */ +#define hlist_nulls_for_each_entry_from(tpos, pos, member) \ + for (; (!is_a_nulls(pos)) && \ + ({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1;}); \ + pos = pos->next) + +#endif diff --git a/include/linux/mdio-gpio.h b/include/linux/mdio-gpio.h new file mode 100644 index 000000000000..e9d3fdfe41d7 --- /dev/null +++ b/include/linux/mdio-gpio.h @@ -0,0 +1,25 @@ +/* + * MDIO-GPIO bus platform data structures + * + * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __LINUX_MDIO_GPIO_H +#define __LINUX_MDIO_GPIO_H + +#include <linux/mdio-bitbang.h> + +struct mdio_gpio_platform_data { + /* GPIO numbers for bus pins */ + unsigned int mdc; + unsigned int mdio; + + unsigned int phy_mask; + int irqs[PHY_MAX_ADDR]; +}; + +#endif /* __LINUX_MDIO_GPIO_H */ diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 800866edfed7..5189b75b151e 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -43,6 +43,9 @@ #include <net/net_namespace.h> #include <net/dsa.h> +#ifdef CONFIG_DCB +#include <net/dcbnl.h> +#endif struct vlan_group; struct ethtool_ops; @@ -451,6 +454,147 @@ struct netdev_queue { struct Qdisc *qdisc_sleeping; } ____cacheline_aligned_in_smp; + +/* + * This structure defines the management hooks for network devices. + * The following hooks can be defined; unless noted otherwise, they are + * optional and can be filled with a null pointer. + * + * int (*ndo_init)(struct net_device *dev); + * This function is called once when network device is registered. + * The network device can use this to any late stage initializaton + * or semantic validattion. It can fail with an error code which will + * be propogated back to register_netdev + * + * void (*ndo_uninit)(struct net_device *dev); + * This function is called when device is unregistered or when registration + * fails. It is not called if init fails. + * + * int (*ndo_open)(struct net_device *dev); + * This function is called when network device transistions to the up + * state. + * + * int (*ndo_stop)(struct net_device *dev); + * This function is called when network device transistions to the down + * state. + * + * int (*ndo_hard_start_xmit)(struct sk_buff *skb, struct net_device *dev); + * Called when a packet needs to be transmitted. + * Must return NETDEV_TX_OK , NETDEV_TX_BUSY, or NETDEV_TX_LOCKED, + * Required can not be NULL. + * + * u16 (*ndo_select_queue)(struct net_device *dev, struct sk_buff *skb); + * Called to decide which queue to when device supports multiple + * transmit queues. + * + * void (*ndo_change_rx_flags)(struct net_device *dev, int flags); + * This function is called to allow device receiver to make + * changes to configuration when multicast or promiscious is enabled. + * + * void (*ndo_set_rx_mode)(struct net_device *dev); + * This function is called device changes address list filtering. + * + * void (*ndo_set_multicast_list)(struct net_device *dev); + * This function is called when the multicast address list changes. + * + * int (*ndo_set_mac_address)(struct net_device *dev, void *addr); + * This function is called when the Media Access Control address + * needs to be changed. If not this interface is not defined, the + * mac address can not be changed. + * + * int (*ndo_validate_addr)(struct net_device *dev); + * Test if Media Access Control address is valid for the device. + * + * int (*ndo_do_ioctl)(struct net_device *dev, struct ifreq *ifr, int cmd); + * Called when a user request an ioctl which can't be handled by + * the generic interface code. If not defined ioctl's return + * not supported error code. + * + * int (*ndo_set_config)(struct net_device *dev, struct ifmap *map); + * Used to set network devices bus interface parameters. This interface + * is retained for legacy reason, new devices should use the bus + * interface (PCI) for low level management. + * + * int (*ndo_change_mtu)(struct net_device *dev, int new_mtu); + * Called when a user wants to change the Maximum Transfer Unit + * of a device. If not defined, any request to change MTU will + * will return an error. + * + * void (*ndo_tx_timeout)(struct net_device *dev); + * Callback uses when the transmitter has not made any progress + * for dev->watchdog ticks. + * + * struct net_device_stats* (*get_stats)(struct net_device *dev); + * Called when a user wants to get the network device usage + * statistics. If not defined, the counters in dev->stats will + * be used. + * + * void (*ndo_vlan_rx_register)(struct net_device *dev, struct vlan_group *grp); + * If device support VLAN receive accleration + * (ie. dev->features & NETIF_F_HW_VLAN_RX), then this function is called + * when vlan groups for the device changes. Note: grp is NULL + * if no vlan's groups are being used. + * + * void (*ndo_vlan_rx_add_vid)(struct net_device *dev, unsigned short vid); + * If device support VLAN filtering (dev->features & NETIF_F_HW_VLAN_FILTER) + * this function is called when a VLAN id is registered. + * + * void (*ndo_vlan_rx_kill_vid)(struct net_device *dev, unsigned short vid); + * If device support VLAN filtering (dev->features & NETIF_F_HW_VLAN_FILTER) + * this function is called when a VLAN id is unregistered. + * + * void (*ndo_poll_controller)(struct net_device *dev); + */ +#define HAVE_NET_DEVICE_OPS +struct net_device_ops { + int (*ndo_init)(struct net_device *dev); + void (*ndo_uninit)(struct net_device *dev); + int (*ndo_open)(struct net_device *dev); + int (*ndo_stop)(struct net_device *dev); + int (*ndo_start_xmit) (struct sk_buff *skb, + struct net_device *dev); + u16 (*ndo_select_queue)(struct net_device *dev, + struct sk_buff *skb); +#define HAVE_CHANGE_RX_FLAGS + void (*ndo_change_rx_flags)(struct net_device *dev, + int flags); +#define HAVE_SET_RX_MODE + void (*ndo_set_rx_mode)(struct net_device *dev); +#define HAVE_MULTICAST + void (*ndo_set_multicast_list)(struct net_device *dev); +#define HAVE_SET_MAC_ADDR + int (*ndo_set_mac_address)(struct net_device *dev, + void *addr); +#define HAVE_VALIDATE_ADDR + int (*ndo_validate_addr)(struct net_device *dev); +#define HAVE_PRIVATE_IOCTL + int (*ndo_do_ioctl)(struct net_device *dev, + struct ifreq *ifr, int cmd); +#define HAVE_SET_CONFIG + int (*ndo_set_config)(struct net_device *dev, + struct ifmap *map); +#define HAVE_CHANGE_MTU + int (*ndo_change_mtu)(struct net_device *dev, + int new_mtu); + int (*ndo_neigh_setup)(struct net_device *dev, + struct neigh_parms *); +#define HAVE_TX_TIMEOUT + void (*ndo_tx_timeout) (struct net_device *dev); + + struct net_device_stats* (*ndo_get_stats)(struct net_device *dev); + + void (*ndo_vlan_rx_register)(struct net_device *dev, + struct vlan_group *grp); + void (*ndo_vlan_rx_add_vid)(struct net_device *dev, + unsigned short vid); + void (*ndo_vlan_rx_kill_vid)(struct net_device *dev, + unsigned short vid); +#ifdef CONFIG_NET_POLL_CONTROLLER +#define HAVE_NETDEV_POLL + void (*ndo_poll_controller)(struct net_device *dev); +#endif +}; + /* * The DEVICE structure. * Actually, this whole structure is a big mistake. It mixes I/O @@ -498,11 +642,6 @@ struct net_device #ifdef CONFIG_NETPOLL struct list_head napi_list; #endif - - /* The device initialization function. Called only once. */ - int (*init)(struct net_device *dev); - - /* ------- Fields preinitialized in Space.c finish here ------- */ /* Net device features */ unsigned long features; @@ -546,15 +685,13 @@ struct net_device * for all in netdev_increment_features. */ #define NETIF_F_ONE_FOR_ALL (NETIF_F_GSO_SOFTWARE | NETIF_F_GSO_ROBUST | \ - NETIF_F_SG | NETIF_F_HIGHDMA | \ + NETIF_F_SG | NETIF_F_HIGHDMA | \ NETIF_F_FRAGLIST) /* Interface index. Unique device identifier */ int ifindex; int iflink; - - struct net_device_stats* (*get_stats)(struct net_device *dev); struct net_device_stats stats; #ifdef CONFIG_WIRELESS_EXT @@ -564,18 +701,13 @@ struct net_device /* Instance data managed by the core of Wireless Extensions. */ struct iw_public_data * wireless_data; #endif + /* Management operations */ + const struct net_device_ops *netdev_ops; const struct ethtool_ops *ethtool_ops; /* Hardware header description */ const struct header_ops *header_ops; - /* - * This marks the end of the "visible" part of the structure. All - * fields hereafter are internal to the system, and may change at - * will (read: may be cleaned up at will). - */ - - unsigned int flags; /* interface flags (a la BSD) */ unsigned short gflags; unsigned short priv_flags; /* Like 'flags' but invisible to userspace. */ @@ -634,7 +766,7 @@ struct net_device unsigned long last_rx; /* Time of last Rx */ /* Interface address info used in eth_type_trans() */ unsigned char dev_addr[MAX_ADDR_LEN]; /* hw address, (before bcast - because most packets are unicast) */ + because most packets are unicast) */ unsigned char broadcast[MAX_ADDR_LEN]; /* hw bcast add */ @@ -654,17 +786,12 @@ struct net_device * One part is mostly used on xmit path (device) */ void *priv; /* pointer to private data */ - int (*hard_start_xmit) (struct sk_buff *skb, - struct net_device *dev); /* These may be needed for future network-power-down code. */ unsigned long trans_start; /* Time (in jiffies) of last Tx */ int watchdog_timeo; /* used by dev_watchdog() */ struct timer_list watchdog_timer; -/* - * refcnt is a very hot point, so align it on SMP - */ /* Number of references to this device */ atomic_t refcnt ____cacheline_aligned_in_smp; @@ -683,56 +810,12 @@ struct net_device NETREG_RELEASED, /* called free_netdev */ } reg_state; - /* Called after device is detached from network. */ - void (*uninit)(struct net_device *dev); - /* Called after last user reference disappears. */ - void (*destructor)(struct net_device *dev); - - /* Pointers to interface service routines. */ - int (*open)(struct net_device *dev); - int (*stop)(struct net_device *dev); -#define HAVE_NETDEV_POLL -#define HAVE_CHANGE_RX_FLAGS - void (*change_rx_flags)(struct net_device *dev, - int flags); -#define HAVE_SET_RX_MODE - void (*set_rx_mode)(struct net_device *dev); -#define HAVE_MULTICAST - void (*set_multicast_list)(struct net_device *dev); -#define HAVE_SET_MAC_ADDR - int (*set_mac_address)(struct net_device *dev, - void *addr); -#define HAVE_VALIDATE_ADDR - int (*validate_addr)(struct net_device *dev); -#define HAVE_PRIVATE_IOCTL - int (*do_ioctl)(struct net_device *dev, - struct ifreq *ifr, int cmd); -#define HAVE_SET_CONFIG - int (*set_config)(struct net_device *dev, - struct ifmap *map); -#define HAVE_CHANGE_MTU - int (*change_mtu)(struct net_device *dev, int new_mtu); - -#define HAVE_TX_TIMEOUT - void (*tx_timeout) (struct net_device *dev); - - void (*vlan_rx_register)(struct net_device *dev, - struct vlan_group *grp); - void (*vlan_rx_add_vid)(struct net_device *dev, - unsigned short vid); - void (*vlan_rx_kill_vid)(struct net_device *dev, - unsigned short vid); + /* Called from unregister, can be used to call free_netdev */ + void (*destructor)(struct net_device *dev); - int (*neigh_setup)(struct net_device *dev, struct neigh_parms *); #ifdef CONFIG_NETPOLL struct netpoll_info *npinfo; #endif -#ifdef CONFIG_NET_POLL_CONTROLLER - void (*poll_controller)(struct net_device *dev); -#endif - - u16 (*select_queue)(struct net_device *dev, - struct sk_buff *skb); #ifdef CONFIG_NET_NS /* Network namespace this network device is inside */ @@ -763,6 +846,49 @@ struct net_device /* for setting kernel sock attribute on TCP connection setup */ #define GSO_MAX_SIZE 65536 unsigned int gso_max_size; + +#ifdef CONFIG_DCB + /* Data Center Bridging netlink ops */ + struct dcbnl_rtnl_ops *dcbnl_ops; +#endif + +#ifdef CONFIG_COMPAT_NET_DEV_OPS + struct { + int (*init)(struct net_device *dev); + void (*uninit)(struct net_device *dev); + int (*open)(struct net_device *dev); + int (*stop)(struct net_device *dev); + int (*hard_start_xmit) (struct sk_buff *skb, + struct net_device *dev); + u16 (*select_queue)(struct net_device *dev, + struct sk_buff *skb); + void (*change_rx_flags)(struct net_device *dev, + int flags); + void (*set_rx_mode)(struct net_device *dev); + void (*set_multicast_list)(struct net_device *dev); + int (*set_mac_address)(struct net_device *dev, + void *addr); + int (*validate_addr)(struct net_device *dev); + int (*do_ioctl)(struct net_device *dev, + struct ifreq *ifr, int cmd); + int (*set_config)(struct net_device *dev, + struct ifmap *map); + int (*change_mtu)(struct net_device *dev, int new_mtu); + int (*neigh_setup)(struct net_device *dev, + struct neigh_parms *); + void (*tx_timeout) (struct net_device *dev); + struct net_device_stats* (*get_stats)(struct net_device *dev); + void (*vlan_rx_register)(struct net_device *dev, + struct vlan_group *grp); + void (*vlan_rx_add_vid)(struct net_device *dev, + unsigned short vid); + void (*vlan_rx_kill_vid)(struct net_device *dev, + unsigned short vid); +#ifdef CONFIG_NET_POLL_CONTROLLER + void (*poll_controller)(struct net_device *dev); +#endif + }; +#endif }; #define to_net_dev(d) container_of(d, struct net_device, dev) @@ -1673,6 +1799,8 @@ extern void netdev_features_change(struct net_device *dev); /* Load a device via the kmod */ extern void dev_load(struct net *net, const char *name); extern void dev_mcast_init(void); +extern const struct net_device_stats *dev_get_stats(struct net_device *dev); + extern int netdev_max_backlog; extern int weight_p; extern int netdev_set_master(struct net_device *dev, struct net_device *master); @@ -1739,26 +1867,31 @@ static inline int skb_bond_should_drop(struct sk_buff *skb) struct net_device *dev = skb->dev; struct net_device *master = dev->master; - if (master && - (dev->priv_flags & IFF_SLAVE_INACTIVE)) { - if ((dev->priv_flags & IFF_SLAVE_NEEDARP) && - skb->protocol == __constant_htons(ETH_P_ARP)) - return 0; + if (master) { + if (master->priv_flags & IFF_MASTER_ARPMON) + dev->last_rx = jiffies; - if (master->priv_flags & IFF_MASTER_ALB) { - if (skb->pkt_type != PACKET_BROADCAST && - skb->pkt_type != PACKET_MULTICAST) + if (dev->priv_flags & IFF_SLAVE_INACTIVE) { + if ((dev->priv_flags & IFF_SLAVE_NEEDARP) && + skb->protocol == __constant_htons(ETH_P_ARP)) return 0; - } - if (master->priv_flags & IFF_MASTER_8023AD && - skb->protocol == __constant_htons(ETH_P_SLOW)) - return 0; - return 1; + if (master->priv_flags & IFF_MASTER_ALB) { + if (skb->pkt_type != PACKET_BROADCAST && + skb->pkt_type != PACKET_MULTICAST) + return 0; + } + if (master->priv_flags & IFF_MASTER_8023AD && + skb->protocol == __constant_htons(ETH_P_SLOW)) + return 0; + + return 1; + } } return 0; } +extern struct pernet_operations __net_initdata loopback_net_ops; #endif /* __KERNEL__ */ #endif /* _LINUX_DEV_H */ diff --git a/include/linux/netfilter_bridge/ebtables.h b/include/linux/netfilter_bridge/ebtables.h index d45e29cd1cfb..e40ddb94b1af 100644 --- a/include/linux/netfilter_bridge/ebtables.h +++ b/include/linux/netfilter_bridge/ebtables.h @@ -300,7 +300,8 @@ struct ebt_table #define EBT_ALIGN(s) (((s) + (__alignof__(struct ebt_replace)-1)) & \ ~(__alignof__(struct ebt_replace)-1)) -extern int ebt_register_table(struct ebt_table *table); +extern struct ebt_table *ebt_register_table(struct net *net, + struct ebt_table *table); extern void ebt_unregister_table(struct ebt_table *table); extern unsigned int ebt_do_table(unsigned int hook, struct sk_buff *skb, const struct net_device *in, const struct net_device *out, diff --git a/include/linux/netfilter_ipv4/ipt_policy.h b/include/linux/netfilter_ipv4/ipt_policy.h index b9478a255301..1037fb2cd206 100644 --- a/include/linux/netfilter_ipv4/ipt_policy.h +++ b/include/linux/netfilter_ipv4/ipt_policy.h @@ -1,6 +1,8 @@ #ifndef _IPT_POLICY_H #define _IPT_POLICY_H +#include <linux/netfilter/xt_policy.h> + #define IPT_POLICY_MAX_ELEM XT_POLICY_MAX_ELEM /* ipt_policy_flags */ diff --git a/include/linux/netfilter_ipv6/ip6t_policy.h b/include/linux/netfilter_ipv6/ip6t_policy.h index 6bab3163d2fb..b1c449d7ec89 100644 --- a/include/linux/netfilter_ipv6/ip6t_policy.h +++ b/include/linux/netfilter_ipv6/ip6t_policy.h @@ -1,6 +1,8 @@ #ifndef _IP6T_POLICY_H #define _IP6T_POLICY_H +#include <linux/netfilter/xt_policy.h> + #define IP6T_POLICY_MAX_ELEM XT_POLICY_MAX_ELEM /* ip6t_policy_flags */ diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 9ff1b54908f3..51b09a1f46c3 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -242,7 +242,8 @@ __nlmsg_put(struct sk_buff *skb, u32 pid, u32 seq, int type, int len, int flags) nlh->nlmsg_flags = flags; nlh->nlmsg_pid = pid; nlh->nlmsg_seq = seq; - memset(NLMSG_DATA(nlh) + len, 0, NLMSG_ALIGN(size) - size); + if (!__builtin_constant_p(size) || NLMSG_ALIGN(size) - size != 0) + memset(NLMSG_DATA(nlh) + len, 0, NLMSG_ALIGN(size) - size); return nlh; } diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 9bad65400fba..e08c8bcfb78d 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -25,8 +25,9 @@ * * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request * to get a list of all present wiphys. - * @NL80211_CMD_SET_WIPHY: set wiphy name, needs %NL80211_ATTR_WIPHY and - * %NL80211_ATTR_WIPHY_NAME. + * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or + * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME + * and/or %NL80211_ATTR_WIPHY_TXQ_PARAMS. * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request * or rename notification. Has attributes %NL80211_ATTR_WIPHY and * %NL80211_ATTR_WIPHY_NAME. @@ -106,6 +107,12 @@ * to the the specified ISO/IEC 3166-1 alpha2 country code. The core will * store this as a valid request and then query userspace for it. * + * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the + * interface identified by %NL80211_ATTR_IFINDEX + * + * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the + * interface identified by %NL80211_ATTR_IFINDEX + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -148,6 +155,9 @@ enum nl80211_commands { NL80211_CMD_SET_REG, NL80211_CMD_REQ_SET_REG, + NL80211_CMD_GET_MESH_PARAMS, + NL80211_CMD_SET_MESH_PARAMS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -169,6 +179,7 @@ enum nl80211_commands { * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. * /sys/class/ieee80211/<phyname>/index * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) + * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters * * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on * @NL80211_ATTR_IFNAME: network interface name @@ -234,6 +245,9 @@ enum nl80211_commands { * (u8, 0 or 1) * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled * (u8, 0 or 1) + * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic + * rates in format defined by IEEE 802.11 7.3.2.2 but without the length + * restriction (at most %NL80211_MAX_SUPP_RATES). * * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from * association request when used with NL80211_CMD_NEW_STATION) @@ -296,6 +310,12 @@ enum nl80211_attrs { NL80211_ATTR_REG_ALPHA2, NL80211_ATTR_REG_RULES, + NL80211_ATTR_MESH_PARAMS, + + NL80211_ATTR_BSS_BASIC_RATES, + + NL80211_ATTR_WIPHY_TXQ_PARAMS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -307,6 +327,8 @@ enum nl80211_attrs { * here */ #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY +#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES +#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_REG_RULES 32 @@ -452,17 +474,29 @@ enum nl80211_mpath_info { * an array of nested frequency attributes * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, * an array of nested bitrate attributes + * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as + * defined in 802.11n + * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE + * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n + * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n */ enum nl80211_band_attr { __NL80211_BAND_ATTR_INVALID, NL80211_BAND_ATTR_FREQS, NL80211_BAND_ATTR_RATES, + NL80211_BAND_ATTR_HT_MCS_SET, + NL80211_BAND_ATTR_HT_CAPA, + NL80211_BAND_ATTR_HT_AMPDU_FACTOR, + NL80211_BAND_ATTR_HT_AMPDU_DENSITY, + /* keep last */ __NL80211_BAND_ATTR_AFTER_LAST, NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 }; +#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA + /** * enum nl80211_frequency_attr - frequency attributes * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz @@ -474,6 +508,8 @@ enum nl80211_band_attr { * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm + * (100 * dBm). */ enum nl80211_frequency_attr { __NL80211_FREQUENCY_ATTR_INVALID, @@ -482,12 +518,15 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_PASSIVE_SCAN, NL80211_FREQUENCY_ATTR_NO_IBSS, NL80211_FREQUENCY_ATTR_RADAR, + NL80211_FREQUENCY_ATTR_MAX_TX_POWER, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 }; +#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER + /** * enum nl80211_bitrate_attr - bitrate attributes * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps @@ -594,4 +633,113 @@ enum nl80211_mntr_flags { NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 }; +/** + * enum nl80211_meshconf_params - mesh configuration parameters + * + * Mesh configuration parameters + * + * @__NL80211_MESHCONF_INVALID: internal use + * + * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in + * millisecond units, used by the Peer Link Open message + * + * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in + * millisecond units, used by the peer link management to close a peer link + * + * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in + * millisecond units + * + * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed + * on this mesh interface + * + * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link + * open retries that can be sent to establish a new peer link instance in a + * mesh + * + * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh + * point. + * + * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically + * open peer links when we detect compatible mesh peers. + * + * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames + * containing a PREQ that an MP can send to a particular destination (path + * target) + * + * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths + * (in milliseconds) + * + * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait + * until giving up on a path discovery (in milliseconds) + * + * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh + * points receiving a PREQ shall consider the forwarding information from the + * root to be valid. (TU = time unit) + * + * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in + * TUs) during which an MP can send only one action frame containing a PREQ + * reference element + * + * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) + * that it takes for an HWMP information element to propagate across the mesh + * + * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * + * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use + */ +enum nl80211_meshconf_params { + __NL80211_MESHCONF_INVALID, + NL80211_MESHCONF_RETRY_TIMEOUT, + NL80211_MESHCONF_CONFIRM_TIMEOUT, + NL80211_MESHCONF_HOLDING_TIMEOUT, + NL80211_MESHCONF_MAX_PEER_LINKS, + NL80211_MESHCONF_MAX_RETRIES, + NL80211_MESHCONF_TTL, + NL80211_MESHCONF_AUTO_OPEN_PLINKS, + NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, + NL80211_MESHCONF_PATH_REFRESH_TIME, + NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, + NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, + NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, + NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, + + /* keep last */ + __NL80211_MESHCONF_ATTR_AFTER_LAST, + NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_txq_attr - TX queue parameter attributes + * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved + * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*) + * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning + * disabled + * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form + * 2^n-1 in the range 1..32767] + * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form + * 2^n-1 in the range 1..32767] + * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] + * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal + * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number + */ +enum nl80211_txq_attr { + __NL80211_TXQ_ATTR_INVALID, + NL80211_TXQ_ATTR_QUEUE, + NL80211_TXQ_ATTR_TXOP, + NL80211_TXQ_ATTR_CWMIN, + NL80211_TXQ_ATTR_CWMAX, + NL80211_TXQ_ATTR_AIFS, + + /* keep last */ + __NL80211_TXQ_ATTR_AFTER_LAST, + NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 +}; + +enum nl80211_txq_q { + NL80211_TXQ_Q_VO, + NL80211_TXQ_Q_VI, + NL80211_TXQ_Q_BE, + NL80211_TXQ_Q_BK +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/linux/phy.h b/include/linux/phy.h index 77c4ed60b982..d7e54d98869f 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -467,6 +467,8 @@ int genphy_restart_aneg(struct phy_device *phydev); int genphy_config_aneg(struct phy_device *phydev); int genphy_update_link(struct phy_device *phydev); int genphy_read_status(struct phy_device *phydev); +int genphy_suspend(struct phy_device *phydev); +int genphy_resume(struct phy_device *phydev); void phy_driver_unregister(struct phy_driver *drv); int phy_driver_register(struct phy_driver *new_driver); void phy_prepare_link(struct phy_device *phydev, diff --git a/include/linux/pkt_cls.h b/include/linux/pkt_cls.h index 7cf7824df778..e6aa8482ad7a 100644 --- a/include/linux/pkt_cls.h +++ b/include/linux/pkt_cls.h @@ -394,6 +394,20 @@ enum #define TCA_BASIC_MAX (__TCA_BASIC_MAX - 1) + +/* Cgroup classifier */ + +enum +{ + TCA_CGROUP_UNSPEC, + TCA_CGROUP_ACT, + TCA_CGROUP_POLICE, + TCA_CGROUP_EMATCHES, + __TCA_CGROUP_MAX, +}; + +#define TCA_CGROUP_MAX (__TCA_CGROUP_MAX - 1) + /* Extended Matches */ struct tcf_ematch_tree_hdr diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h index 5d921fa91a5b..e3f133adba78 100644 --- a/include/linux/pkt_sched.h +++ b/include/linux/pkt_sched.h @@ -500,4 +500,20 @@ struct tc_netem_corrupt #define NETEM_DIST_SCALE 8192 +/* DRR */ + +enum +{ + TCA_DRR_UNSPEC, + TCA_DRR_QUANTUM, + __TCA_DRR_MAX +}; + +#define TCA_DRR_MAX (__TCA_DRR_MAX - 1) + +struct tc_drr_stats +{ + u32 deficit; +}; + #endif diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h new file mode 100644 index 000000000000..f9ddd03961a8 --- /dev/null +++ b/include/linux/rculist_nulls.h @@ -0,0 +1,110 @@ +#ifndef _LINUX_RCULIST_NULLS_H +#define _LINUX_RCULIST_NULLS_H + +#ifdef __KERNEL__ + +/* + * RCU-protected list version + */ +#include <linux/list_nulls.h> +#include <linux/rcupdate.h> + +/** + * hlist_nulls_del_init_rcu - deletes entry from hash list with re-initialization + * @n: the element to delete from the hash list. + * + * Note: hlist_nulls_unhashed() on the node return true after this. It is + * useful for RCU based read lockfree traversal if the writer side + * must know if the list entry is still hashed or already unhashed. + * + * In particular, it means that we can not poison the forward pointers + * that may still be used for walking the hash list and we can only + * zero the pprev pointer so list_unhashed() will return true after + * this. + * + * The caller must take whatever precautions are necessary (such as + * holding appropriate locks) to avoid racing with another + * list-mutation primitive, such as hlist_nulls_add_head_rcu() or + * hlist_nulls_del_rcu(), running on this same list. However, it is + * perfectly legal to run concurrently with the _rcu list-traversal + * primitives, such as hlist_nulls_for_each_entry_rcu(). + */ +static inline void hlist_nulls_del_init_rcu(struct hlist_nulls_node *n) +{ + if (!hlist_nulls_unhashed(n)) { + __hlist_nulls_del(n); + n->pprev = NULL; + } +} + +/** + * hlist_nulls_del_rcu - deletes entry from hash list without re-initialization + * @n: the element to delete from the hash list. + * + * Note: hlist_nulls_unhashed() on entry does not return true after this, + * the entry is in an undefined state. It is useful for RCU based + * lockfree traversal. + * + * In particular, it means that we can not poison the forward + * pointers that may still be used for walking the hash list. + * + * The caller must take whatever precautions are necessary + * (such as holding appropriate locks) to avoid racing + * with another list-mutation primitive, such as hlist_nulls_add_head_rcu() + * or hlist_nulls_del_rcu(), running on this same list. + * However, it is perfectly legal to run concurrently with + * the _rcu list-traversal primitives, such as + * hlist_nulls_for_each_entry(). + */ +static inline void hlist_nulls_del_rcu(struct hlist_nulls_node *n) +{ + __hlist_nulls_del(n); + n->pprev = LIST_POISON2; +} + +/** + * hlist_nulls_add_head_rcu + * @n: the element to add to the hash list. + * @h: the list to add to. + * + * Description: + * Adds the specified element to the specified hlist_nulls, + * while permitting racing traversals. + * + * The caller must take whatever precautions are necessary + * (such as holding appropriate locks) to avoid racing + * with another list-mutation primitive, such as hlist_nulls_add_head_rcu() + * or hlist_nulls_del_rcu(), running on this same list. + * However, it is perfectly legal to run concurrently with + * the _rcu list-traversal primitives, such as + * hlist_nulls_for_each_entry_rcu(), used to prevent memory-consistency + * problems on Alpha CPUs. Regardless of the type of CPU, the + * list-traversal primitive must be guarded by rcu_read_lock(). + */ +static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n, + struct hlist_nulls_head *h) +{ + struct hlist_nulls_node *first = h->first; + + n->next = first; + n->pprev = &h->first; + rcu_assign_pointer(h->first, n); + if (!is_a_nulls(first)) + first->pprev = &n->next; +} +/** + * hlist_nulls_for_each_entry_rcu - iterate over rcu list of given type + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_nulls_node to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the hlist_nulls_node within the struct. + * + */ +#define hlist_nulls_for_each_entry_rcu(tpos, pos, head, member) \ + for (pos = rcu_dereference((head)->first); \ + (!is_a_nulls(pos)) && \ + ({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1; }); \ + pos = rcu_dereference(pos->next)) + +#endif +#endif diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 4cd64b0d9825..f376a93927f7 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -108,6 +108,7 @@ struct rfkill { struct device dev; struct list_head node; + enum rfkill_state state_for_resume; }; #define to_rfkill(d) container_of(d, struct rfkill, dev) diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index 2b3d51c6ec9c..e88f7058b3a1 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -107,6 +107,11 @@ enum { RTM_GETADDRLABEL, #define RTM_GETADDRLABEL RTM_GETADDRLABEL + RTM_GETDCB = 78, +#define RTM_GETDCB RTM_GETDCB + RTM_SETDCB, +#define RTM_SETDCB RTM_SETDCB + __RTM_MAX, #define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1) }; diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 2725f4e5a9bf..acf17af45af9 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -250,6 +250,9 @@ typedef unsigned char *sk_buff_data_t; * @tc_verd: traffic control verdict * @ndisc_nodetype: router type (from link layer) * @do_not_encrypt: set to prevent encryption of this frame + * @requeue: set to indicate that the wireless core should attempt + * a software retry on this frame if we failed to + * receive an ACK for it * @dma_cookie: a cookie to one of several possible DMA operations * done by skb DMA functions * @secmark: security marking @@ -269,8 +272,9 @@ struct sk_buff { struct dst_entry *dst; struct rtable *rtable; }; +#ifdef CONFIG_XFRM struct sec_path *sp; - +#endif /* * This is the control buffer. It is free to use for every * layer. Please put your private variables there. If you @@ -325,6 +329,7 @@ struct sk_buff { #endif #if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE) __u8 do_not_encrypt:1; + __u8 requeue:1; #endif /* 0/13/14 bit hole */ @@ -488,6 +493,19 @@ static inline bool skb_queue_is_last(const struct sk_buff_head *list, } /** + * skb_queue_is_first - check if skb is the first entry in the queue + * @list: queue head + * @skb: buffer + * + * Returns true if @skb is the first buffer on the list. + */ +static inline bool skb_queue_is_first(const struct sk_buff_head *list, + const struct sk_buff *skb) +{ + return (skb->prev == (struct sk_buff *) list); +} + +/** * skb_queue_next - return the next packet in the queue * @list: queue head * @skb: current buffer @@ -506,6 +524,24 @@ static inline struct sk_buff *skb_queue_next(const struct sk_buff_head *list, } /** + * skb_queue_prev - return the prev packet in the queue + * @list: queue head + * @skb: current buffer + * + * Return the prev packet in @list before @skb. It is only valid to + * call this if skb_queue_is_first() evaluates to false. + */ +static inline struct sk_buff *skb_queue_prev(const struct sk_buff_head *list, + const struct sk_buff *skb) +{ + /* This BUG_ON may seem severe, but if we just return then we + * are going to dereference garbage. + */ + BUG_ON(skb_queue_is_first(list, skb)); + return skb->prev; +} + +/** * skb_get - reference buffer * @skb: buffer to reference * @@ -1647,6 +1683,8 @@ extern int skb_splice_bits(struct sk_buff *skb, extern void skb_copy_and_csum_dev(const struct sk_buff *skb, u8 *to); extern void skb_split(struct sk_buff *skb, struct sk_buff *skb1, const u32 len); +extern int skb_shift(struct sk_buff *tgt, struct sk_buff *skb, + int shiftlen); extern struct sk_buff *skb_segment(struct sk_buff *skb, int features); @@ -1864,6 +1902,18 @@ static inline void skb_copy_queue_mapping(struct sk_buff *to, const struct sk_bu to->queue_mapping = from->queue_mapping; } +#ifdef CONFIG_XFRM +static inline struct sec_path *skb_sec_path(struct sk_buff *skb) +{ + return skb->sp; +} +#else +static inline struct sec_path *skb_sec_path(struct sk_buff *skb) +{ + return NULL; +} +#endif + static inline int skb_is_gso(const struct sk_buff *skb) { return skb_shinfo(skb)->gso_size; diff --git a/include/linux/smsc911x.h b/include/linux/smsc911x.h new file mode 100644 index 000000000000..47c4ffd10dbb --- /dev/null +++ b/include/linux/smsc911x.h @@ -0,0 +1,42 @@ +/*************************************************************************** + * + * Copyright (C) 2004-2008 SMSC + * Copyright (C) 2005-2008 ARM + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ***************************************************************************/ +#ifndef __LINUX_SMSC911X_H__ +#define __LINUX_SMSC911X_H__ + +#include <linux/phy.h> + +/* platform_device configuration data, should be assigned to + * the platform_device's dev.platform_data */ +struct smsc911x_platform_config { + unsigned int irq_polarity; + unsigned int irq_type; + phy_interface_t phy_interface; +}; + +/* Constants for platform_device irq polarity configuration */ +#define SMSC911X_IRQ_POLARITY_ACTIVE_LOW 0 +#define SMSC911X_IRQ_POLARITY_ACTIVE_HIGH 1 + +/* Constants for platform_device irq type configuration */ +#define SMSC911X_IRQ_TYPE_OPEN_DRAIN 0 +#define SMSC911X_IRQ_TYPE_PUSH_PULL 1 + +#endif /* __LINUX_SMSC911X_H__ */ diff --git a/include/linux/snmp.h b/include/linux/snmp.h index 7a6e6bba4a71..aee3f1e1d1ce 100644 --- a/include/linux/snmp.h +++ b/include/linux/snmp.h @@ -216,6 +216,9 @@ enum LINUX_MIB_TCPSPURIOUSRTOS, /* TCPSpuriousRTOs */ LINUX_MIB_TCPMD5NOTFOUND, /* TCPMD5NotFound */ LINUX_MIB_TCPMD5UNEXPECTED, /* TCPMD5Unexpected */ + LINUX_MIB_SACKSHIFTED, + LINUX_MIB_SACKMERGED, + LINUX_MIB_SACKSHIFTFALLBACK, __LINUX_MIB_MAX }; diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h index 6fd7b016517f..0127daca4354 100644 --- a/include/linux/sunrpc/svc_xprt.h +++ b/include/linux/sunrpc/svc_xprt.h @@ -139,14 +139,14 @@ static inline char *__svc_print_addr(struct sockaddr *addr, { switch (addr->sa_family) { case AF_INET: - snprintf(buf, len, "%u.%u.%u.%u, port=%u", - NIPQUAD(((struct sockaddr_in *) addr)->sin_addr), + snprintf(buf, len, "%pI4, port=%u", + &((struct sockaddr_in *)addr)->sin_addr, ntohs(((struct sockaddr_in *) addr)->sin_port)); break; case AF_INET6: - snprintf(buf, len, "%x:%x:%x:%x:%x:%x:%x:%x, port=%u", - NIP6(((struct sockaddr_in6 *) addr)->sin6_addr), + snprintf(buf, len, "%pI6, port=%u", + &((struct sockaddr_in6 *)addr)->sin6_addr, ntohs(((struct sockaddr_in6 *) addr)->sin6_port)); break; diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 5e33761b9b8a..5cdd0aa8bde9 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -20,6 +20,7 @@ #define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */ #define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */ #define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */ +#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */ struct virtio_net_config { @@ -44,4 +45,12 @@ struct virtio_net_hdr __u16 csum_start; /* Position to start checksumming from */ __u16 csum_offset; /* Offset after that to place checksum */ }; + +/* This is the version of the header to use when the MRG_RXBUF + * feature has been negotiated. */ +struct virtio_net_hdr_mrg_rxbuf { + struct virtio_net_hdr hdr; + __u16 num_buffers; /* Number of merged rx buffers */ +}; + #endif /* _LINUX_VIRTIO_NET_H */ diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h index 4bc1e6b86cb2..52f3abd453a1 100644 --- a/include/linux/xfrm.h +++ b/include/linux/xfrm.h @@ -199,6 +199,9 @@ enum { #define XFRM_MSG_NEWSPDINFO XFRM_MSG_NEWSPDINFO XFRM_MSG_GETSPDINFO, #define XFRM_MSG_GETSPDINFO XFRM_MSG_GETSPDINFO + + XFRM_MSG_MAPPING, +#define XFRM_MSG_MAPPING XFRM_MSG_MAPPING __XFRM_MSG_MAX }; #define XFRM_MSG_MAX (__XFRM_MSG_MAX - 1) @@ -438,6 +441,15 @@ struct xfrm_user_migrate { __u16 new_family; }; +struct xfrm_user_mapping { + struct xfrm_usersa_id id; + __u32 reqid; + xfrm_address_t old_saddr; + xfrm_address_t new_saddr; + __be16 old_sport; + __be16 new_sport; +}; + #ifndef __KERNEL__ /* backwards compatibility for userspace */ #define XFRMGRP_ACQUIRE 1 @@ -464,6 +476,8 @@ enum xfrm_nlgroups { #define XFRMNLGRP_REPORT XFRMNLGRP_REPORT XFRMNLGRP_MIGRATE, #define XFRMNLGRP_MIGRATE XFRMNLGRP_MIGRATE + XFRMNLGRP_MAPPING, +#define XFRMNLGRP_MAPPING XFRMNLGRP_MAPPING __XFRMNLGRP_MAX }; #define XFRMNLGRP_MAX (__XFRMNLGRP_MAX - 1) |