diff options
Diffstat (limited to 'include/net/mac80211.h')
-rw-r--r-- | include/net/mac80211.h | 69 |
1 files changed, 55 insertions, 14 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8d6ae22c09bf..56c6ecb2c10a 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -7,7 +7,7 @@ * Copyright 2007-2010 Johannes Berg <johannes@sipsolutions.net> * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2015 - 2017 Intel Deutschland GmbH - * Copyright (C) 2018 - 2023 Intel Corporation + * Copyright (C) 2018 - 2024 Intel Corporation */ #ifndef MAC80211_H @@ -214,6 +214,10 @@ struct ieee80211_low_level_stats { * @IEEE80211_CHANCTX_CHANGE_CHANNEL: switched to another operating channel, * this is used only with channel switching with CSA * @IEEE80211_CHANCTX_CHANGE_MIN_WIDTH: The min required channel width changed + * @IEEE80211_CHANCTX_CHANGE_AP: The AP channel definition changed, so (wider + * bandwidth) OFDMA settings need to be changed + * @IEEE80211_CHANCTX_CHANGE_PUNCTURING: The punctured channel(s) bitmap + * was changed. */ enum ieee80211_chanctx_change { IEEE80211_CHANCTX_CHANGE_WIDTH = BIT(0), @@ -221,6 +225,19 @@ enum ieee80211_chanctx_change { IEEE80211_CHANCTX_CHANGE_RADAR = BIT(2), IEEE80211_CHANCTX_CHANGE_CHANNEL = BIT(3), IEEE80211_CHANCTX_CHANGE_MIN_WIDTH = BIT(4), + IEEE80211_CHANCTX_CHANGE_AP = BIT(5), + IEEE80211_CHANCTX_CHANGE_PUNCTURING = BIT(6), +}; + +/** + * struct ieee80211_chan_req - A channel "request" + * @oper: channel definition to use for operation + * @ap: the channel definition of the AP, if any + * (otherwise the chan member is %NULL) + */ +struct ieee80211_chan_req { + struct cfg80211_chan_def oper; + struct cfg80211_chan_def ap; }; /** @@ -231,6 +248,8 @@ enum ieee80211_chanctx_change { * * @def: the channel definition * @min_def: the minimum channel definition currently required. + * @ap: the channel definition the AP actually is operating as, + * for use with (wider bandwidth) OFDMA * @rx_chains_static: The number of RX chains that must always be * active on the channel to receive MIMO transmissions * @rx_chains_dynamic: The number of RX chains that must be enabled @@ -243,6 +262,7 @@ enum ieee80211_chanctx_change { struct ieee80211_chanctx_conf { struct cfg80211_chan_def def; struct cfg80211_chan_def min_def; + struct cfg80211_chan_def ap; u8 rx_chains_static, rx_chains_dynamic; @@ -340,7 +360,6 @@ struct ieee80211_vif_chanctx_switch { * @BSS_CHANGED_FILS_DISCOVERY: FILS discovery status changed. * @BSS_CHANGED_UNSOL_BCAST_PROBE_RESP: Unsolicited broadcast probe response * status changed. - * @BSS_CHANGED_EHT_PUNCTURING: The channel puncturing bitmap changed. * @BSS_CHANGED_MLD_VALID_LINKS: MLD valid links status changed. * @BSS_CHANGED_MLD_TTLM: TID to link mapping was changed */ @@ -377,7 +396,6 @@ enum ieee80211_bss_change { BSS_CHANGED_HE_BSS_COLOR = 1<<29, BSS_CHANGED_FILS_DISCOVERY = 1<<30, BSS_CHANGED_UNSOL_BCAST_PROBE_RESP = 1<<31, - BSS_CHANGED_EHT_PUNCTURING = BIT_ULL(32), BSS_CHANGED_MLD_VALID_LINKS = BIT_ULL(33), BSS_CHANGED_MLD_TTLM = BIT_ULL(34), @@ -539,6 +557,10 @@ struct ieee80211_fils_discovery { * to that BSS) that can change during the lifetime of the BSS. * * @vif: reference to owning VIF + * @bss: the cfg80211 bss descriptor. Valid only for a station, and only + * when associated. Note: This contains information which is not + * necessarily authenticated. For example, information coming from probe + * responses. * @addr: (link) address used locally * @link_id: link ID, or 0 for non-MLO * @htc_trig_based_pkt_ext: default PE in 4us units, if BSS supports HE @@ -583,7 +605,7 @@ struct ieee80211_fils_discovery { * @mcast_rate: per-band multicast rate index + 1 (0: disabled) * @bssid: The BSSID for this BSS * @enable_beacon: whether beaconing should be enabled or not - * @chandef: Channel definition for this BSS -- the hardware might be + * @chanreq: Channel request for this BSS -- the hardware might be * configured a higher bandwidth than this BSS uses, for example. * @mu_group: VHT MU-MIMO group membership data * @ht_operation_mode: HT operation mode like in &struct ieee80211_ht_operation. @@ -644,9 +666,7 @@ struct ieee80211_fils_discovery { * @tx_pwr_env_num: number of @tx_pwr_env. * @pwr_reduction: power constraint of BSS. * @eht_support: does this BSS support EHT - * @eht_puncturing: bitmap to indicate which channels are punctured in this BSS * @csa_active: marks whether a channel switch is going on. - * @csa_punct_bitmap: new puncturing bitmap for channel switch * @mu_mimo_owner: indicates interface owns MU-MIMO capability * @chanctx_conf: The channel context this interface is assigned to, or %NULL * when it is not assigned. This pointer is RCU-protected due to the TX @@ -684,6 +704,7 @@ struct ieee80211_fils_discovery { */ struct ieee80211_bss_conf { struct ieee80211_vif *vif; + struct cfg80211_bss *bss; const u8 *bssid; unsigned int link_id; @@ -716,7 +737,7 @@ struct ieee80211_bss_conf { u32 cqm_rssi_hyst; s32 cqm_rssi_low; s32 cqm_rssi_high; - struct cfg80211_chan_def chandef; + struct ieee80211_chan_req chanreq; struct ieee80211_mu_group_data mu_group; bool qos; bool hidden_ssid; @@ -749,10 +770,8 @@ struct ieee80211_bss_conf { u8 tx_pwr_env_num; u8 pwr_reduction; bool eht_support; - u16 eht_puncturing; bool csa_active; - u16 csa_punct_bitmap; bool mu_mimo_owner; struct ieee80211_chanctx_conf __rcu *chanctx_conf; @@ -1774,6 +1793,10 @@ struct ieee80211_channel_switch { * this is not pure P2P vif. * @IEEE80211_VIF_EML_ACTIVE: The driver indicates that EML operation is * enabled for the interface. + * @IEEE80211_VIF_IGNORE_OFDMA_WIDER_BW: Ignore wider bandwidth OFDMA + * operation on this interface and request a channel context without + * the AP definition. Use this e.g. because the device is able to + * handle OFDMA (downlink and trigger for uplink) on a per-AP basis. */ enum ieee80211_vif_flags { IEEE80211_VIF_BEACON_FILTER = BIT(0), @@ -1781,6 +1804,7 @@ enum ieee80211_vif_flags { IEEE80211_VIF_SUPPORTS_UAPSD = BIT(2), IEEE80211_VIF_GET_NOA_UPDATE = BIT(3), IEEE80211_VIF_EML_ACTIVE = BIT(4), + IEEE80211_VIF_IGNORE_OFDMA_WIDER_BW = BIT(5), }; @@ -5507,6 +5531,7 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, /** * ieee80211_beacon_update_cntdwn - request mac80211 to decrement the beacon countdown * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @link_id: valid link_id during MLO or 0 for non-MLO * * The beacon counter should be updated after each beacon transmission. * This function is called implicitly when @@ -5516,7 +5541,8 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, * * Return: new countdown value */ -u8 ieee80211_beacon_update_cntdwn(struct ieee80211_vif *vif); +u8 ieee80211_beacon_update_cntdwn(struct ieee80211_vif *vif, + unsigned int link_id); /** * ieee80211_beacon_set_cntdwn - request mac80211 to set beacon countdown @@ -5534,20 +5560,23 @@ void ieee80211_beacon_set_cntdwn(struct ieee80211_vif *vif, u8 counter); /** * ieee80211_csa_finish - notify mac80211 about channel switch * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @link_id: valid link_id during MLO or 0 for non-MLO * * After a channel switch announcement was scheduled and the counter in this * announcement hits 1, this function must be called by the driver to * notify mac80211 that the channel can be changed. */ -void ieee80211_csa_finish(struct ieee80211_vif *vif); +void ieee80211_csa_finish(struct ieee80211_vif *vif, unsigned int link_id); /** * ieee80211_beacon_cntdwn_is_complete - find out if countdown reached 1 * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @link_id: valid link_id during MLO or 0 for non-MLO * * This function returns whether the countdown reached zero. */ -bool ieee80211_beacon_cntdwn_is_complete(struct ieee80211_vif *vif); +bool ieee80211_beacon_cntdwn_is_complete(struct ieee80211_vif *vif, + unsigned int link_id); /** * ieee80211_color_change_finish - notify mac80211 about color change @@ -7468,11 +7497,10 @@ ieee80211_get_unsol_bcast_probe_resp_tmpl(struct ieee80211_hw *hw, * @vif: &struct ieee80211_vif pointer from the add_interface callback. * @color_bitmap: a 64 bit bitmap representing the colors that the local BSS is * aware of. - * @gfp: allocation flags */ void ieee80211_obss_color_collision_notify(struct ieee80211_vif *vif, - u64 color_bitmap, gfp_t gfp); + u64 color_bitmap); /** * ieee80211_is_tx_data - check if frame is a data frame @@ -7532,4 +7560,17 @@ int ieee80211_set_active_links(struct ieee80211_vif *vif, u16 active_links); void ieee80211_set_active_links_async(struct ieee80211_vif *vif, u16 active_links); +/* for older drivers - let's not document these ... */ +int ieee80211_emulate_add_chanctx(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *ctx); +void ieee80211_emulate_remove_chanctx(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *ctx); +void ieee80211_emulate_change_chanctx(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *ctx, + u32 changed); +int ieee80211_emulate_switch_vif_chanctx(struct ieee80211_hw *hw, + struct ieee80211_vif_chanctx_switch *vifs, + int n_vifs, + enum ieee80211_chanctx_switch_mode mode); + #endif /* MAC80211_H */ |