summaryrefslogtreecommitdiff
path: root/include/uapi/linux/can/isotp.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/uapi/linux/can/isotp.h')
-rw-r--r--include/uapi/linux/can/isotp.h165
1 files changed, 165 insertions, 0 deletions
diff --git a/include/uapi/linux/can/isotp.h b/include/uapi/linux/can/isotp.h
new file mode 100644
index 000000000000..7793b26aa154
--- /dev/null
+++ b/include/uapi/linux/can/isotp.h
@@ -0,0 +1,165 @@
+/* SPDX-License-Identifier: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) */
+/*
+ * linux/can/isotp.h
+ *
+ * Definitions for isotp CAN sockets (ISO 15765-2:2016)
+ *
+ * Copyright (c) 2020 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Volkswagen nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Alternatively, provided that this notice is retained in full, this
+ * software may be distributed under the terms of the GNU General
+ * Public License ("GPL") version 2, in which case the provisions of the
+ * GPL apply INSTEAD OF those given above.
+ *
+ * The provided data structures and external interfaces from this code
+ * are not restricted to be used by modules with a GPL compatible license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ */
+
+#ifndef _UAPI_CAN_ISOTP_H
+#define _UAPI_CAN_ISOTP_H
+
+#include <linux/types.h>
+#include <linux/can.h>
+
+#define SOL_CAN_ISOTP (SOL_CAN_BASE + CAN_ISOTP)
+
+/* for socket options affecting the socket (not the global system) */
+
+#define CAN_ISOTP_OPTS 1 /* pass struct can_isotp_options */
+
+#define CAN_ISOTP_RECV_FC 2 /* pass struct can_isotp_fc_options */
+
+/* sockopts to force stmin timer values for protocol regression tests */
+
+#define CAN_ISOTP_TX_STMIN 3 /* pass __u32 value in nano secs */
+ /* use this time instead of value */
+ /* provided in FC from the receiver */
+
+#define CAN_ISOTP_RX_STMIN 4 /* pass __u32 value in nano secs */
+ /* ignore received CF frames which */
+ /* timestamps differ less than val */
+
+#define CAN_ISOTP_LL_OPTS 5 /* pass struct can_isotp_ll_options */
+
+struct can_isotp_options {
+
+ __u32 flags; /* set flags for isotp behaviour. */
+ /* __u32 value : flags see below */
+
+ __u32 frame_txtime; /* frame transmission time (N_As/N_Ar) */
+ /* __u32 value : time in nano secs */
+
+ __u8 ext_address; /* set address for extended addressing */
+ /* __u8 value : extended address */
+
+ __u8 txpad_content; /* set content of padding byte (tx) */
+ /* __u8 value : content on tx path */
+
+ __u8 rxpad_content; /* set content of padding byte (rx) */
+ /* __u8 value : content on rx path */
+
+ __u8 rx_ext_address; /* set address for extended addressing */
+ /* __u8 value : extended address (rx) */
+};
+
+struct can_isotp_fc_options {
+
+ __u8 bs; /* blocksize provided in FC frame */
+ /* __u8 value : blocksize. 0 = off */
+
+ __u8 stmin; /* separation time provided in FC frame */
+ /* __u8 value : */
+ /* 0x00 - 0x7F : 0 - 127 ms */
+ /* 0x80 - 0xF0 : reserved */
+ /* 0xF1 - 0xF9 : 100 us - 900 us */
+ /* 0xFA - 0xFF : reserved */
+
+ __u8 wftmax; /* max. number of wait frame transmiss. */
+ /* __u8 value : 0 = omit FC N_PDU WT */
+};
+
+struct can_isotp_ll_options {
+
+ __u8 mtu; /* generated & accepted CAN frame type */
+ /* __u8 value : */
+ /* CAN_MTU (16) -> standard CAN 2.0 */
+ /* CANFD_MTU (72) -> CAN FD frame */
+
+ __u8 tx_dl; /* tx link layer data length in bytes */
+ /* (configured maximum payload length) */
+ /* __u8 value : 8,12,16,20,24,32,48,64 */
+ /* => rx path supports all LL_DL values */
+
+ __u8 tx_flags; /* set into struct canfd_frame.flags */
+ /* at frame creation: e.g. CANFD_BRS */
+ /* Obsolete when the BRS flag is fixed */
+ /* by the CAN netdriver configuration */
+};
+
+/* flags for isotp behaviour */
+
+#define CAN_ISOTP_LISTEN_MODE 0x001 /* listen only (do not send FC) */
+#define CAN_ISOTP_EXTEND_ADDR 0x002 /* enable extended addressing */
+#define CAN_ISOTP_TX_PADDING 0x004 /* enable CAN frame padding tx path */
+#define CAN_ISOTP_RX_PADDING 0x008 /* enable CAN frame padding rx path */
+#define CAN_ISOTP_CHK_PAD_LEN 0x010 /* check received CAN frame padding */
+#define CAN_ISOTP_CHK_PAD_DATA 0x020 /* check received CAN frame padding */
+#define CAN_ISOTP_HALF_DUPLEX 0x040 /* half duplex error state handling */
+#define CAN_ISOTP_FORCE_TXSTMIN 0x080 /* ignore stmin from received FC */
+#define CAN_ISOTP_FORCE_RXSTMIN 0x100 /* ignore CFs depending on rx stmin */
+#define CAN_ISOTP_RX_EXT_ADDR 0x200 /* different rx extended addressing */
+#define CAN_ISOTP_WAIT_TX_DONE 0x400 /* wait for tx completion */
+
+
+/* default values */
+
+#define CAN_ISOTP_DEFAULT_FLAGS 0
+#define CAN_ISOTP_DEFAULT_EXT_ADDRESS 0x00
+#define CAN_ISOTP_DEFAULT_PAD_CONTENT 0xCC /* prevent bit-stuffing */
+#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 0
+#define CAN_ISOTP_DEFAULT_RECV_BS 0
+#define CAN_ISOTP_DEFAULT_RECV_STMIN 0x00
+#define CAN_ISOTP_DEFAULT_RECV_WFTMAX 0
+
+#define CAN_ISOTP_DEFAULT_LL_MTU CAN_MTU
+#define CAN_ISOTP_DEFAULT_LL_TX_DL CAN_MAX_DLEN
+#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS 0
+
+/*
+ * Remark on CAN_ISOTP_DEFAULT_RECV_* values:
+ *
+ * We can strongly assume, that the Linux Kernel implementation of
+ * CAN_ISOTP is capable to run with BS=0, STmin=0 and WFTmax=0.
+ * But as we like to be able to behave as a commonly available ECU,
+ * these default settings can be changed via sockopts.
+ * For that reason the STmin value is intentionally _not_ checked for
+ * consistency and copied directly into the flow control (FC) frame.
+ */
+
+#endif /* !_UAPI_CAN_ISOTP_H */