summaryrefslogtreecommitdiff
path: root/include/uapi/linux/mdio.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/uapi/linux/mdio.h')
-rw-r--r--include/uapi/linux/mdio.h75
1 files changed, 75 insertions, 0 deletions
diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h
index c54e6eae5366..75b7257a51e1 100644
--- a/include/uapi/linux/mdio.h
+++ b/include/uapi/linux/mdio.h
@@ -67,6 +67,19 @@
#define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */
#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */
#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */
+#define MDIO_B10L_PMA_CTRL 2294 /* 10BASE-T1L PMA control */
+#define MDIO_PMA_10T1L_STAT 2295 /* 10BASE-T1L PMA status */
+#define MDIO_PCS_10T1L_CTRL 2278 /* 10BASE-T1L PCS control */
+#define MDIO_PMA_PMD_BT1 18 /* BASE-T1 PMA/PMD extended ability */
+#define MDIO_AN_T1_CTRL 512 /* BASE-T1 AN control */
+#define MDIO_AN_T1_STAT 513 /* BASE-T1 AN status */
+#define MDIO_AN_T1_ADV_L 514 /* BASE-T1 AN advertisement register [15:0] */
+#define MDIO_AN_T1_ADV_M 515 /* BASE-T1 AN advertisement register [31:16] */
+#define MDIO_AN_T1_ADV_H 516 /* BASE-T1 AN advertisement register [47:32] */
+#define MDIO_AN_T1_LP_L 517 /* BASE-T1 AN LP Base Page ability register [15:0] */
+#define MDIO_AN_T1_LP_M 518 /* BASE-T1 AN LP Base Page ability register [31:16] */
+#define MDIO_AN_T1_LP_H 519 /* BASE-T1 AN LP Base Page ability register [47:32] */
+#define MDIO_PMA_PMD_BT1_CTRL 2100 /* BASE-T1 PMA/PMD control register */
/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */
@@ -159,6 +172,7 @@
#define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */
#define MDIO_PMA_CTRL2_2_5GBT 0x0030 /* 2.5GBaseT type */
#define MDIO_PMA_CTRL2_5GBT 0x0031 /* 5GBaseT type */
+#define MDIO_PMA_CTRL2_BASET1 0x003D /* BASE-T1 type */
#define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */
#define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */
#define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */
@@ -212,6 +226,7 @@
#define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */
#define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */
#define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */
+#define MDIO_PMA_EXTABLE_BT1 0x0800 /* BASE-T1 ability */
#define MDIO_PMA_EXTABLE_NBT 0x4000 /* 2.5/5GBASE-T ability */
/* PHY XGXS lane state register. */
@@ -268,6 +283,66 @@
#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */
#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */
+/* 10BASE-T1L PMA control */
+#define MDIO_PMA_10T1L_CTRL_LB_EN 0x0001 /* Enable loopback mode */
+#define MDIO_PMA_10T1L_CTRL_EEE_EN 0x0400 /* Enable EEE mode */
+#define MDIO_PMA_10T1L_CTRL_LOW_POWER 0x0800 /* Low-power mode */
+#define MDIO_PMA_10T1L_CTRL_2V4_EN 0x1000 /* Enable 2.4 Vpp operating mode */
+#define MDIO_PMA_10T1L_CTRL_TX_DIS 0x4000 /* Transmit disable */
+#define MDIO_PMA_10T1L_CTRL_PMA_RST 0x8000 /* MA reset */
+
+/* 10BASE-T1L PMA status register. */
+#define MDIO_PMA_10T1L_STAT_LINK 0x0001 /* PMA receive link up */
+#define MDIO_PMA_10T1L_STAT_FAULT 0x0002 /* Fault condition detected */
+#define MDIO_PMA_10T1L_STAT_POLARITY 0x0004 /* Receive polarity is reversed */
+#define MDIO_PMA_10T1L_STAT_RECV_FAULT 0x0200 /* Able to detect fault on receive path */
+#define MDIO_PMA_10T1L_STAT_EEE 0x0400 /* PHY has EEE ability */
+#define MDIO_PMA_10T1L_STAT_LOW_POWER 0x0800 /* PMA has low-power ability */
+#define MDIO_PMA_10T1L_STAT_2V4_ABLE 0x1000 /* PHY has 2.4 Vpp operating mode ability */
+#define MDIO_PMA_10T1L_STAT_LB_ABLE 0x2000 /* PHY has loopback ability */
+
+/* 10BASE-T1L PCS control register. */
+#define MDIO_PCS_10T1L_CTRL_LB 0x4000 /* Enable PCS level loopback mode */
+#define MDIO_PCS_10T1L_CTRL_RESET 0x8000 /* PCS reset */
+
+/* BASE-T1 PMA/PMD extended ability register. */
+#define MDIO_PMA_PMD_BT1_B10L_ABLE 0x0004 /* 10BASE-T1L Ability */
+
+/* BASE-T1 auto-negotiation advertisement register [15:0] */
+#define MDIO_AN_T1_ADV_L_PAUSE_CAP ADVERTISE_PAUSE_CAP
+#define MDIO_AN_T1_ADV_L_PAUSE_ASYM ADVERTISE_PAUSE_ASYM
+#define MDIO_AN_T1_ADV_L_FORCE_MS 0x1000 /* Force Master/slave Configuration */
+#define MDIO_AN_T1_ADV_L_REMOTE_FAULT ADVERTISE_RFAULT
+#define MDIO_AN_T1_ADV_L_ACK ADVERTISE_LPACK
+#define MDIO_AN_T1_ADV_L_NEXT_PAGE_REQ ADVERTISE_NPAGE
+
+/* BASE-T1 auto-negotiation advertisement register [31:16] */
+#define MDIO_AN_T1_ADV_M_B10L 0x4000 /* device is compatible with 10BASE-T1L */
+#define MDIO_AN_T1_ADV_M_MST 0x0010 /* advertise master preference */
+
+/* BASE-T1 auto-negotiation advertisement register [47:32] */
+#define MDIO_AN_T1_ADV_H_10L_TX_HI_REQ 0x1000 /* 10BASE-T1L High Level Transmit Request */
+#define MDIO_AN_T1_ADV_H_10L_TX_HI 0x2000 /* 10BASE-T1L High Level Transmit Ability */
+
+/* BASE-T1 AN LP Base Page ability register [15:0] */
+#define MDIO_AN_T1_LP_L_PAUSE_CAP LPA_PAUSE_CAP
+#define MDIO_AN_T1_LP_L_PAUSE_ASYM LPA_PAUSE_ASYM
+#define MDIO_AN_T1_LP_L_FORCE_MS 0x1000 /* LP Force Master/slave Configuration */
+#define MDIO_AN_T1_LP_L_REMOTE_FAULT LPA_RFAULT
+#define MDIO_AN_T1_LP_L_ACK LPA_LPACK
+#define MDIO_AN_T1_LP_L_NEXT_PAGE_REQ LPA_NPAGE
+
+/* BASE-T1 AN LP Base Page ability register [31:16] */
+#define MDIO_AN_T1_LP_M_MST 0x0010 /* LP master preference */
+#define MDIO_AN_T1_LP_M_B10L 0x4000 /* LP is compatible with 10BASE-T1L */
+
+/* BASE-T1 AN LP Base Page ability register [47:32] */
+#define MDIO_AN_T1_LP_H_10L_TX_HI_REQ 0x1000 /* 10BASE-T1L High Level LP Transmit Request */
+#define MDIO_AN_T1_LP_H_10L_TX_HI 0x2000 /* 10BASE-T1L High Level LP Transmit Ability */
+
+/* BASE-T1 PMA/PMD control register */
+#define MDIO_PMA_PMD_BT1_CTRL_CFG_MST 0x4000 /* MASTER-SLAVE config value */
+
/* EEE Supported/Advertisement/LP Advertisement registers.
*
* EEE capability Register (3.20), Advertisement (7.60) and