diff options
Diffstat (limited to 'include/uapi/linux')
76 files changed, 3340 insertions, 371 deletions
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 3c42b9f1bada..35bcf52dbc65 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -1115,6 +1115,7 @@ enum bpf_attach_type { BPF_CGROUP_UNIX_GETSOCKNAME, BPF_NETKIT_PRIMARY, BPF_NETKIT_PEER, + BPF_TRACE_KPROBE_SESSION, __MAX_BPF_ATTACH_TYPE }; @@ -1135,6 +1136,7 @@ enum bpf_link_type { BPF_LINK_TYPE_TCX = 11, BPF_LINK_TYPE_UPROBE_MULTI = 12, BPF_LINK_TYPE_NETKIT = 13, + BPF_LINK_TYPE_SOCKMAP = 14, __MAX_BPF_LINK_TYPE, }; @@ -1423,6 +1425,8 @@ enum { #define BPF_F_TEST_RUN_ON_CPU (1U << 0) /* If set, XDP frames will be transmitted after processing */ #define BPF_F_TEST_XDP_LIVE_FRAMES (1U << 1) +/* If set, apply CHECKSUM_COMPLETE to skb and validate the checksum */ +#define BPF_F_TEST_SKB_CHECKSUM_COMPLETE (1U << 2) /* type for BPF_ENABLE_STATS */ enum bpf_stats_type { @@ -1662,8 +1666,10 @@ union bpf_attr { } query; struct { /* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */ - __u64 name; - __u32 prog_fd; + __u64 name; + __u32 prog_fd; + __u32 :32; + __aligned_u64 cookie; } raw_tracepoint; struct { /* anonymous struct for BPF_BTF_LOAD */ @@ -3392,6 +3398,10 @@ union bpf_attr { * for the nexthop. If the src addr cannot be derived, * **BPF_FIB_LKUP_RET_NO_SRC_ADDR** is returned. In this * case, *params*->dmac and *params*->smac are not set either. + * **BPF_FIB_LOOKUP_MARK** + * Use the mark present in *params*->mark for the fib lookup. + * This option should not be used with BPF_FIB_LOOKUP_DIRECT, + * as it only has meaning for full lookups. * * *ctx* is either **struct xdp_md** for XDP programs or * **struct sk_buff** tc cls_act programs. @@ -5020,7 +5030,7 @@ union bpf_attr { * bytes will be copied to *dst* * Return * The **hash_algo** is returned on success, - * **-EOPNOTSUP** if IMA is disabled or **-EINVAL** if + * **-EOPNOTSUPP** if IMA is disabled or **-EINVAL** if * invalid arguments are passed. * * struct socket *bpf_sock_from_file(struct file *file) @@ -5506,7 +5516,7 @@ union bpf_attr { * bytes will be copied to *dst* * Return * The **hash_algo** is returned on success, - * **-EOPNOTSUP** if the hash calculation failed or **-EINVAL** if + * **-EOPNOTSUPP** if the hash calculation failed or **-EINVAL** if * invalid arguments are passed. * * void *bpf_kptr_xchg(void *map_value, void *ptr) @@ -6199,12 +6209,17 @@ union { \ __u64 :64; \ } __attribute__((aligned(8))) +/* The enum used in skb->tstamp_type. It specifies the clock type + * of the time stored in the skb->tstamp. + */ enum { - BPF_SKB_TSTAMP_UNSPEC, - BPF_SKB_TSTAMP_DELIVERY_MONO, /* tstamp has mono delivery time */ - /* For any BPF_SKB_TSTAMP_* that the bpf prog cannot handle, - * the bpf prog should handle it like BPF_SKB_TSTAMP_UNSPEC - * and try to deduce it by ingress, egress or skb->sk->sk_clockid. + BPF_SKB_TSTAMP_UNSPEC = 0, /* DEPRECATED */ + BPF_SKB_TSTAMP_DELIVERY_MONO = 1, /* DEPRECATED */ + BPF_SKB_CLOCK_REALTIME = 0, + BPF_SKB_CLOCK_MONOTONIC = 1, + BPF_SKB_CLOCK_TAI = 2, + /* For any future BPF_SKB_CLOCK_* that the bpf prog cannot handle, + * the bpf prog can try to deduce it by ingress/egress/skb->sk->sk_clockid. */ }; @@ -6718,6 +6733,10 @@ struct bpf_link_info { __u32 ifindex; __u32 attach_type; } netkit; + struct { + __u32 map_id; + __u32 attach_type; + } sockmap; }; } __attribute__((aligned(8))); @@ -6936,6 +6955,8 @@ enum { * socket transition to LISTEN state. */ BPF_SOCK_OPS_RTT_CB, /* Called on every RTT. + * Arg1: measured RTT input (mrtt) + * Arg2: updated srtt */ BPF_SOCK_OPS_PARSE_HDR_OPT_CB, /* Parse the header option. * It will be called to handle @@ -7118,6 +7139,7 @@ enum { BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2), BPF_FIB_LOOKUP_TBID = (1U << 3), BPF_FIB_LOOKUP_SRC = (1U << 4), + BPF_FIB_LOOKUP_MARK = (1U << 5), }; enum { @@ -7150,7 +7172,7 @@ struct bpf_fib_lookup { /* output: MTU value */ __u16 mtu_result; - }; + } __attribute__((packed, aligned(2))); /* input: L3 device index for lookup * output: device index from FIB lookup */ @@ -7195,8 +7217,19 @@ struct bpf_fib_lookup { __u32 tbid; }; - __u8 smac[6]; /* ETH_ALEN */ - __u8 dmac[6]; /* ETH_ALEN */ + union { + /* input */ + struct { + __u32 mark; /* policy routing */ + /* 2 4-byte holes for input */ + }; + + /* output: source and dest mac */ + struct { + __u8 smac[6]; /* ETH_ALEN */ + __u8 dmac[6]; /* ETH_ALEN */ + }; + }; }; struct bpf_redir_neigh { @@ -7283,6 +7316,10 @@ struct bpf_timer { __u64 __opaque[2]; } __attribute__((aligned(8))); +struct bpf_wq { + __u64 __opaque[2]; +} __attribute__((aligned(8))); + struct bpf_dynptr { __u64 __opaque[2]; } __attribute__((aligned(8))); diff --git a/include/uapi/linux/btrfs_tree.h b/include/uapi/linux/btrfs_tree.h index d24e8e121507..fc29d273845d 100644 --- a/include/uapi/linux/btrfs_tree.h +++ b/include/uapi/linux/btrfs_tree.h @@ -747,21 +747,9 @@ struct btrfs_raid_stride { __le64 physical; } __attribute__ ((__packed__)); -/* The stripe_extent::encoding, 1:1 mapping of enum btrfs_raid_types. */ -#define BTRFS_STRIPE_RAID0 1 -#define BTRFS_STRIPE_RAID1 2 -#define BTRFS_STRIPE_DUP 3 -#define BTRFS_STRIPE_RAID10 4 -#define BTRFS_STRIPE_RAID5 5 -#define BTRFS_STRIPE_RAID6 6 -#define BTRFS_STRIPE_RAID1C3 7 -#define BTRFS_STRIPE_RAID1C4 8 - struct btrfs_stripe_extent { - __u8 encoding; - __u8 reserved[7]; /* An array of raid strides this stripe is composed of. */ - struct btrfs_raid_stride strides[]; + __DECLARE_FLEX_ARRAY(struct btrfs_raid_stride, strides); } __attribute__ ((__packed__)); #define BTRFS_HEADER_FLAG_WRITTEN (1ULL << 0) @@ -777,6 +765,14 @@ struct btrfs_stripe_extent { #define BTRFS_SUPER_FLAG_CHANGING_FSID (1ULL << 35) #define BTRFS_SUPER_FLAG_CHANGING_FSID_V2 (1ULL << 36) +/* + * Those are temporaray flags utilized by btrfs-progs to do offline conversion. + * They are rejected by kernel. + * But still keep them all here to avoid conflicts. + */ +#define BTRFS_SUPER_FLAG_CHANGING_BG_TREE (1ULL << 38) +#define BTRFS_SUPER_FLAG_CHANGING_DATA_CSUM (1ULL << 39) +#define BTRFS_SUPER_FLAG_CHANGING_META_CSUM (1ULL << 40) /* * items in the extent btree are used to record the objectid of the diff --git a/include/uapi/linux/can/isotp.h b/include/uapi/linux/can/isotp.h index 6cde62371b6f..bd990917f7c4 100644 --- a/include/uapi/linux/can/isotp.h +++ b/include/uapi/linux/can/isotp.h @@ -2,7 +2,7 @@ /* * linux/can/isotp.h * - * Definitions for isotp CAN sockets (ISO 15765-2:2016) + * Definitions for ISO 15765-2 CAN transport protocol sockets * * Copyright (c) 2020 Volkswagen Group Electronic Research * All rights reserved. diff --git a/include/uapi/linux/cn_proc.h b/include/uapi/linux/cn_proc.h index f2afb7cc4926..18e3745b86cd 100644 --- a/include/uapi/linux/cn_proc.h +++ b/include/uapi/linux/cn_proc.h @@ -69,8 +69,7 @@ struct proc_input { static inline enum proc_cn_event valid_event(enum proc_cn_event ev_type) { - ev_type &= PROC_EVENT_ALL; - return ev_type; + return (enum proc_cn_event)(ev_type & PROC_EVENT_ALL); } /* diff --git a/include/uapi/linux/cryptouser.h b/include/uapi/linux/cryptouser.h index 5730c67f0617..20a6c0fc149e 100644 --- a/include/uapi/linux/cryptouser.h +++ b/include/uapi/linux/cryptouser.h @@ -32,7 +32,7 @@ enum { CRYPTO_MSG_UPDATEALG, CRYPTO_MSG_GETALG, CRYPTO_MSG_DELRNG, - CRYPTO_MSG_GETSTAT, + CRYPTO_MSG_GETSTAT, /* No longer supported, do not use. */ __CRYPTO_MSG_MAX }; #define CRYPTO_MSG_MAX (__CRYPTO_MSG_MAX - 1) @@ -54,16 +54,16 @@ enum crypto_attr_type_t { CRYPTOCFGA_REPORT_AKCIPHER, /* struct crypto_report_akcipher */ CRYPTOCFGA_REPORT_KPP, /* struct crypto_report_kpp */ CRYPTOCFGA_REPORT_ACOMP, /* struct crypto_report_acomp */ - CRYPTOCFGA_STAT_LARVAL, /* struct crypto_stat */ - CRYPTOCFGA_STAT_HASH, /* struct crypto_stat */ - CRYPTOCFGA_STAT_BLKCIPHER, /* struct crypto_stat */ - CRYPTOCFGA_STAT_AEAD, /* struct crypto_stat */ - CRYPTOCFGA_STAT_COMPRESS, /* struct crypto_stat */ - CRYPTOCFGA_STAT_RNG, /* struct crypto_stat */ - CRYPTOCFGA_STAT_CIPHER, /* struct crypto_stat */ - CRYPTOCFGA_STAT_AKCIPHER, /* struct crypto_stat */ - CRYPTOCFGA_STAT_KPP, /* struct crypto_stat */ - CRYPTOCFGA_STAT_ACOMP, /* struct crypto_stat */ + CRYPTOCFGA_STAT_LARVAL, /* No longer supported, do not use. */ + CRYPTOCFGA_STAT_HASH, /* No longer supported, do not use. */ + CRYPTOCFGA_STAT_BLKCIPHER, /* No longer supported, do not use. */ + CRYPTOCFGA_STAT_AEAD, /* No longer supported, do not use. */ + CRYPTOCFGA_STAT_COMPRESS, /* No longer supported, do not use. */ + CRYPTOCFGA_STAT_RNG, /* No longer supported, do not use. */ + CRYPTOCFGA_STAT_CIPHER, /* No longer supported, do not use. */ + CRYPTOCFGA_STAT_AKCIPHER, /* No longer supported, do not use. */ + CRYPTOCFGA_STAT_KPP, /* No longer supported, do not use. */ + CRYPTOCFGA_STAT_ACOMP, /* No longer supported, do not use. */ __CRYPTOCFGA_MAX #define CRYPTOCFGA_MAX (__CRYPTOCFGA_MAX - 1) @@ -79,6 +79,7 @@ struct crypto_user_alg { __u32 cru_flags; }; +/* No longer supported, do not use. */ struct crypto_stat_aead { char type[CRYPTO_MAX_NAME]; __u64 stat_encrypt_cnt; @@ -88,6 +89,7 @@ struct crypto_stat_aead { __u64 stat_err_cnt; }; +/* No longer supported, do not use. */ struct crypto_stat_akcipher { char type[CRYPTO_MAX_NAME]; __u64 stat_encrypt_cnt; @@ -99,6 +101,7 @@ struct crypto_stat_akcipher { __u64 stat_err_cnt; }; +/* No longer supported, do not use. */ struct crypto_stat_cipher { char type[CRYPTO_MAX_NAME]; __u64 stat_encrypt_cnt; @@ -108,6 +111,7 @@ struct crypto_stat_cipher { __u64 stat_err_cnt; }; +/* No longer supported, do not use. */ struct crypto_stat_compress { char type[CRYPTO_MAX_NAME]; __u64 stat_compress_cnt; @@ -117,6 +121,7 @@ struct crypto_stat_compress { __u64 stat_err_cnt; }; +/* No longer supported, do not use. */ struct crypto_stat_hash { char type[CRYPTO_MAX_NAME]; __u64 stat_hash_cnt; @@ -124,6 +129,7 @@ struct crypto_stat_hash { __u64 stat_err_cnt; }; +/* No longer supported, do not use. */ struct crypto_stat_kpp { char type[CRYPTO_MAX_NAME]; __u64 stat_setsecret_cnt; @@ -132,6 +138,7 @@ struct crypto_stat_kpp { __u64 stat_err_cnt; }; +/* No longer supported, do not use. */ struct crypto_stat_rng { char type[CRYPTO_MAX_NAME]; __u64 stat_generate_cnt; @@ -140,6 +147,7 @@ struct crypto_stat_rng { __u64 stat_err_cnt; }; +/* No longer supported, do not use. */ struct crypto_stat_larval { char type[CRYPTO_MAX_NAME]; }; diff --git a/include/uapi/linux/cxl_mem.h b/include/uapi/linux/cxl_mem.h index 42066f4eb890..c6c0fe27495d 100644 --- a/include/uapi/linux/cxl_mem.h +++ b/include/uapi/linux/cxl_mem.h @@ -47,6 +47,9 @@ ___DEPRECATED(SCAN_MEDIA, "Scan Media"), \ ___DEPRECATED(GET_SCAN_MEDIA, "Get Scan Media Results"), \ ___C(GET_TIMESTAMP, "Get Timestamp"), \ + ___C(GET_LOG_CAPS, "Get Log Capabilities"), \ + ___C(CLEAR_LOG, "Clear Log"), \ + ___C(GET_SUP_LOG_SUBLIST, "Get Supported Logs Sub-List"), \ ___C(MAX, "invalid / last command") #define ___C(a, b) CXL_MEM_COMMAND_ID_##a diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h index 2da0c7eb6710..9401aa343673 100644 --- a/include/uapi/linux/devlink.h +++ b/include/uapi/linux/devlink.h @@ -686,6 +686,7 @@ enum devlink_port_function_attr { DEVLINK_PORT_FN_ATTR_OPSTATE, /* u8 */ DEVLINK_PORT_FN_ATTR_CAPS, /* bitfield32 */ DEVLINK_PORT_FN_ATTR_DEVLINK, /* nested */ + DEVLINK_PORT_FN_ATTR_MAX_IO_EQS, /* u32 */ __DEVLINK_PORT_FUNCTION_ATTR_MAX, DEVLINK_PORT_FUNCTION_ATTR_MAX = __DEVLINK_PORT_FUNCTION_ATTR_MAX - 1 diff --git a/include/uapi/linux/dlm.h b/include/uapi/linux/dlm.h index e7e905fb0bb2..4eaf835780b0 100644 --- a/include/uapi/linux/dlm.h +++ b/include/uapi/linux/dlm.h @@ -71,6 +71,8 @@ struct dlm_lksb { /* DLM_LSFL_TIMEWARN is deprecated and reserved. DO NOT USE! */ #define DLM_LSFL_TIMEWARN 0x00000002 #define DLM_LSFL_NEWEXCL 0x00000008 +/* currently reserved due in-kernel use */ +#define __DLM_LSFL_RESERVED0 0x00000010 #endif /* _UAPI__DLM_DOT_H__ */ diff --git a/include/uapi/linux/dma-heap.h b/include/uapi/linux/dma-heap.h index 6f84fa08e074..a4cf716a49fa 100644 --- a/include/uapi/linux/dma-heap.h +++ b/include/uapi/linux/dma-heap.h @@ -19,7 +19,7 @@ #define DMA_HEAP_VALID_FD_FLAGS (O_CLOEXEC | O_ACCMODE) /* Currently no heap flags */ -#define DMA_HEAP_VALID_HEAP_FLAGS (0) +#define DMA_HEAP_VALID_HEAP_FLAGS (0ULL) /** * struct dma_heap_allocation_data - metadata passed from userspace for diff --git a/include/uapi/linux/dvb/frontend.h b/include/uapi/linux/dvb/frontend.h index 7e0983b987c2..8d38c6befda8 100644 --- a/include/uapi/linux/dvb/frontend.h +++ b/include/uapi/linux/dvb/frontend.h @@ -854,7 +854,7 @@ struct dtv_stats { union { __u64 uvalue; /* for counters and relative scales */ __s64 svalue; /* for 0.001 dB measures */ - }; + } __attribute__ ((packed)); } __attribute__ ((packed)); diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 11fc18988bc2..4a0a6e703483 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -753,6 +753,252 @@ enum ethtool_module_power_mode { }; /** + * enum ethtool_c33_pse_ext_state - groups of PSE extended states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION: Group of error_condition states + * @ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID: Group of mr_mps_valid states + * @ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE: Group of mr_pse_enable states + * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED: Group of option_detect_ted + * states + * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM: Group of option_vport_lim states + * @ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED: Group of ovld_detected states + * @ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE: Group of pd_dll_power_type + * states + * @ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE: Group of power_not_available + * states + * @ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED: Group of short_detected states + */ +enum ethtool_c33_pse_ext_state { + ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION = 1, + ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID, + ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE, + ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED, + ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM, + ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED, + ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE, + ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE, + ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED, +}; + +/** + * enum ethtool_c33_pse_ext_substate_mr_mps_valid - mr_mps_valid states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD: Underload + * state + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN: Port is not + * connected + * + * The PSE monitors either the DC or AC Maintain Power Signature + * (MPS, see 33.2.9.1). This variable indicates the presence or absence of + * a valid MPS. + */ +enum ethtool_c33_pse_ext_substate_mr_mps_valid { + ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN, +}; + +/** + * enum ethtool_c33_pse_ext_substate_error_condition - error_condition states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT: Non-existing + * port number + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT: Undefined port + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT: Internal + * hardware fault + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON: + * Communication error after force on + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS: Unknown + * port status + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF: Host + * crash turn off + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN: + * Host crash force shutdown + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE: Configuration + * change + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP: Over + * temperature detected + * + * error_condition is a variable indicating the status of + * implementation-specific fault conditions or optionally other system faults + * that prevent the PSE from meeting the specifications in Table 33–11 and that + * require the PSE not to source power. These error conditions are different + * from those monitored by the state diagrams in Figure 33–10. + */ +enum ethtool_c33_pse_ext_substate_error_condition { + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP, +}; + +/** + * enum ethtool_c33_pse_ext_substate_mr_pse_enable - mr_pse_enable states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE: Disable + * pin active + * + * mr_pse_enable is control variable that selects PSE operation and test + * functions. + */ +enum ethtool_c33_pse_ext_substate_mr_pse_enable { + ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE = 1, +}; + +/** + * enum ethtool_c33_pse_ext_substate_option_detect_ted - option_detect_ted + * states functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS: Detection + * in process + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR: + * Connection check error + * + * option_detect_ted is a variable indicating if detection can be performed + * by the PSE during the ted_timer interval. + */ +enum ethtool_c33_pse_ext_substate_option_detect_ted { + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR, +}; + +/** + * enum ethtool_c33_pse_ext_substate_option_vport_lim - option_vport_lim states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE: Main supply + * voltage is high + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE: Main supply + * voltage is low + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION: Voltage + * injection into the port + * + * option_vport_lim is an optional variable indicates if VPSE is out of the + * operating range during normal operating state. + */ +enum ethtool_c33_pse_ext_substate_option_vport_lim { + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE, + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION, +}; + +/** + * enum ethtool_c33_pse_ext_substate_ovld_detected - ovld_detected states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD: Overload state + * + * ovld_detected is a variable indicating if the PSE output current has been + * in an overload condition (see 33.2.7.6) for at least TCUT of a one-second + * sliding time. + */ +enum ethtool_c33_pse_ext_substate_ovld_detected { + ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD = 1, +}; + +/** + * enum ethtool_c33_pse_ext_substate_power_not_available - power_not_available + * states functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED: Power + * budget exceeded for the controller + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET: + * Configured port power limit exceeded controller power budget + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT: + * Power request from PD exceeds port limit + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT: Power + * denied due to Hardware power limit + * + * power_not_available is a variable that is asserted in an + * implementation-dependent manner when the PSE is no longer capable of + * sourcing sufficient power to support the attached PD. Sufficient power + * is defined by classification; see 33.2.6. + */ +enum ethtool_c33_pse_ext_substate_power_not_available { + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET, + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT, + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT, +}; + +/** + * enum ethtool_c33_pse_ext_substate_short_detected - short_detected states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION: Short + * condition was detected + * + * short_detected is a variable indicating if the PSE output current has been + * in a short circuit condition for TLIM within a sliding window (see 33.2.7.7). + */ +enum ethtool_c33_pse_ext_substate_short_detected { + ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION = 1, +}; + +/** + * enum ethtool_pse_types - Types of PSE controller. + * @ETHTOOL_PSE_UNKNOWN: Type of PSE controller is unknown + * @ETHTOOL_PSE_PODL: PSE controller which support PoDL + * @ETHTOOL_PSE_C33: PSE controller which support Clause 33 (PoE) + */ +enum ethtool_pse_types { + ETHTOOL_PSE_UNKNOWN = 1 << 0, + ETHTOOL_PSE_PODL = 1 << 1, + ETHTOOL_PSE_C33 = 1 << 2, +}; + +/** + * enum ethtool_c33_pse_admin_state - operational state of the PoDL PSE + * functions. IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState + * @ETHTOOL_C33_PSE_ADMIN_STATE_UNKNOWN: state of PSE functions is unknown + * @ETHTOOL_C33_PSE_ADMIN_STATE_DISABLED: PSE functions are disabled + * @ETHTOOL_C33_PSE_ADMIN_STATE_ENABLED: PSE functions are enabled + */ +enum ethtool_c33_pse_admin_state { + ETHTOOL_C33_PSE_ADMIN_STATE_UNKNOWN = 1, + ETHTOOL_C33_PSE_ADMIN_STATE_DISABLED, + ETHTOOL_C33_PSE_ADMIN_STATE_ENABLED, +}; + +/** + * enum ethtool_c33_pse_pw_d_status - power detection status of the PSE. + * IEEE 802.3-2022 30.9.1.1.3 aPoDLPSEPowerDetectionStatus: + * @ETHTOOL_C33_PSE_PW_D_STATUS_UNKNOWN: PSE status is unknown + * @ETHTOOL_C33_PSE_PW_D_STATUS_DISABLED: The enumeration "disabled" + * indicates that the PSE State diagram is in the state DISABLED. + * @ETHTOOL_C33_PSE_PW_D_STATUS_SEARCHING: The enumeration "searching" + * indicates the PSE State diagram is in a state other than those + * listed. + * @ETHTOOL_C33_PSE_PW_D_STATUS_DELIVERING: The enumeration + * "deliveringPower" indicates that the PSE State diagram is in the + * state POWER_ON. + * @ETHTOOL_C33_PSE_PW_D_STATUS_TEST: The enumeration "test" indicates that + * the PSE State diagram is in the state TEST_MODE. + * @ETHTOOL_C33_PSE_PW_D_STATUS_FAULT: The enumeration "fault" indicates that + * the PSE State diagram is in the state TEST_ERROR. + * @ETHTOOL_C33_PSE_PW_D_STATUS_OTHERFAULT: The enumeration "otherFault" + * indicates that the PSE State diagram is in the state IDLE due to + * the variable error_condition = true. + */ +enum ethtool_c33_pse_pw_d_status { + ETHTOOL_C33_PSE_PW_D_STATUS_UNKNOWN = 1, + ETHTOOL_C33_PSE_PW_D_STATUS_DISABLED, + ETHTOOL_C33_PSE_PW_D_STATUS_SEARCHING, + ETHTOOL_C33_PSE_PW_D_STATUS_DELIVERING, + ETHTOOL_C33_PSE_PW_D_STATUS_TEST, + ETHTOOL_C33_PSE_PW_D_STATUS_FAULT, + ETHTOOL_C33_PSE_PW_D_STATUS_OTHERFAULT, +}; + +/** * enum ethtool_podl_pse_admin_state - operational state of the PoDL PSE * functions. IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState * @ETHTOOL_PODL_PSE_ADMIN_STATE_UNKNOWN: state of PoDL PSE functions are @@ -823,6 +1069,24 @@ enum ethtool_mm_verify_status { }; /** + * enum ethtool_module_fw_flash_status - plug-in module firmware flashing status + * @ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED: The firmware flashing process has + * started. + * @ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS: The firmware flashing process + * is in progress. + * @ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED: The firmware flashing process was + * completed successfully. + * @ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR: The firmware flashing process was + * stopped due to an error. + */ +enum ethtool_module_fw_flash_status { + ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED = 1, + ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS, + ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED, + ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR, +}; + +/** * struct ethtool_gstrings - string set for data tagging * @cmd: Command number = %ETHTOOL_GSTRINGS * @string_set: String set ID; one of &enum ethtool_stringset @@ -1790,6 +2054,7 @@ enum ethtool_link_mode_bit_indices { ETHTOOL_LINK_MODE_10baseT1S_Full_BIT = 99, ETHTOOL_LINK_MODE_10baseT1S_Half_BIT = 100, ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT = 101, + ETHTOOL_LINK_MODE_10baseT1BRR_Full_BIT = 102, /* must be last entry */ __ETHTOOL_LINK_MODE_MASK_NBITS diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h index 3f89074aa06c..6d5bdcc67631 100644 --- a/include/uapi/linux/ethtool_netlink.h +++ b/include/uapi/linux/ethtool_netlink.h @@ -57,6 +57,7 @@ enum { ETHTOOL_MSG_PLCA_GET_STATUS, ETHTOOL_MSG_MM_GET, ETHTOOL_MSG_MM_SET, + ETHTOOL_MSG_MODULE_FW_FLASH_ACT, /* add new constants above here */ __ETHTOOL_MSG_USER_CNT, @@ -109,6 +110,7 @@ enum { ETHTOOL_MSG_PLCA_NTF, ETHTOOL_MSG_MM_GET_REPLY, ETHTOOL_MSG_MM_NTF, + ETHTOOL_MSG_MODULE_FW_FLASH_NTF, /* add new constants above here */ __ETHTOOL_MSG_KERNEL_CNT, @@ -117,12 +119,11 @@ enum { /* request header */ -/* use compact bitsets in reply */ -#define ETHTOOL_FLAG_COMPACT_BITSETS (1 << 0) -/* provide optional reply for SET or ACT requests */ -#define ETHTOOL_FLAG_OMIT_REPLY (1 << 1) -/* request statistics, if supported by the driver */ -#define ETHTOOL_FLAG_STATS (1 << 2) +enum ethtool_header_flags { + ETHTOOL_FLAG_COMPACT_BITSETS = 1 << 0, /* use compact bitsets in reply */ + ETHTOOL_FLAG_OMIT_REPLY = 1 << 1, /* provide optional reply for SET or ACT requests */ + ETHTOOL_FLAG_STATS = 1 << 2, /* request statistics, if supported by the driver */ +}; #define ETHTOOL_FLAG_ALL (ETHTOOL_FLAG_COMPACT_BITSETS | \ ETHTOOL_FLAG_OMIT_REPLY | \ @@ -416,12 +417,34 @@ enum { ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES, /* u32 */ ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES, /* u32 */ ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS, /* u32 */ + /* nest - _A_PROFILE_IRQ_MODERATION */ + ETHTOOL_A_COALESCE_RX_PROFILE, + /* nest - _A_PROFILE_IRQ_MODERATION */ + ETHTOOL_A_COALESCE_TX_PROFILE, /* add new constants above here */ __ETHTOOL_A_COALESCE_CNT, ETHTOOL_A_COALESCE_MAX = (__ETHTOOL_A_COALESCE_CNT - 1) }; +enum { + ETHTOOL_A_PROFILE_UNSPEC, + /* nest, _A_IRQ_MODERATION_* */ + ETHTOOL_A_PROFILE_IRQ_MODERATION, + __ETHTOOL_A_PROFILE_CNT, + ETHTOOL_A_PROFILE_MAX = (__ETHTOOL_A_PROFILE_CNT - 1) +}; + +enum { + ETHTOOL_A_IRQ_MODERATION_UNSPEC, + ETHTOOL_A_IRQ_MODERATION_USEC, /* u32 */ + ETHTOOL_A_IRQ_MODERATION_PKTS, /* u32 */ + ETHTOOL_A_IRQ_MODERATION_COMPS, /* u32 */ + + __ETHTOOL_A_IRQ_MODERATION_CNT, + ETHTOOL_A_IRQ_MODERATION_MAX = (__ETHTOOL_A_IRQ_MODERATION_CNT - 1) +}; + /* PAUSE */ enum { @@ -478,12 +501,26 @@ enum { ETHTOOL_A_TSINFO_TX_TYPES, /* bitset */ ETHTOOL_A_TSINFO_RX_FILTERS, /* bitset */ ETHTOOL_A_TSINFO_PHC_INDEX, /* u32 */ + ETHTOOL_A_TSINFO_STATS, /* nest - _A_TSINFO_STAT */ /* add new constants above here */ __ETHTOOL_A_TSINFO_CNT, ETHTOOL_A_TSINFO_MAX = (__ETHTOOL_A_TSINFO_CNT - 1) }; +enum { + ETHTOOL_A_TS_STAT_UNSPEC, + + ETHTOOL_A_TS_STAT_TX_PKTS, /* uint */ + ETHTOOL_A_TS_STAT_TX_LOST, /* uint */ + ETHTOOL_A_TS_STAT_TX_ERR, /* uint */ + + /* add new constants above here */ + __ETHTOOL_A_TS_STAT_CNT, + ETHTOOL_A_TS_STAT_MAX = (__ETHTOOL_A_TS_STAT_CNT - 1) + +}; + /* PHC VCLOCKS */ enum { @@ -515,6 +552,10 @@ enum { ETHTOOL_A_CABLE_RESULT_CODE_OPEN, ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT, ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT, + /* detected reflection caused by the impedance discontinuity between + * a regular 100 Ohm cable and a part with the abnormal impedance value + */ + ETHTOOL_A_CABLE_RESULT_CODE_IMPEDANCE_MISMATCH, }; enum { @@ -890,11 +931,26 @@ enum { /* Power Sourcing Equipment */ enum { + ETHTOOL_A_C33_PSE_PW_LIMIT_UNSPEC, + ETHTOOL_A_C33_PSE_PW_LIMIT_MIN, /* u32 */ + ETHTOOL_A_C33_PSE_PW_LIMIT_MAX, /* u32 */ +}; + +enum { ETHTOOL_A_PSE_UNSPEC, ETHTOOL_A_PSE_HEADER, /* nest - _A_HEADER_* */ ETHTOOL_A_PODL_PSE_ADMIN_STATE, /* u32 */ ETHTOOL_A_PODL_PSE_ADMIN_CONTROL, /* u32 */ ETHTOOL_A_PODL_PSE_PW_D_STATUS, /* u32 */ + ETHTOOL_A_C33_PSE_ADMIN_STATE, /* u32 */ + ETHTOOL_A_C33_PSE_ADMIN_CONTROL, /* u32 */ + ETHTOOL_A_C33_PSE_PW_D_STATUS, /* u32 */ + ETHTOOL_A_C33_PSE_PW_CLASS, /* u32 */ + ETHTOOL_A_C33_PSE_ACTUAL_PW, /* u32 */ + ETHTOOL_A_C33_PSE_EXT_STATE, /* u32 */ + ETHTOOL_A_C33_PSE_EXT_SUBSTATE, /* u32 */ + ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT, /* u32 */ + ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES, /* nest - _C33_PSE_PW_LIMIT_* */ /* add new constants above here */ __ETHTOOL_A_PSE_CNT, @@ -976,6 +1032,23 @@ enum { ETHTOOL_A_MM_MAX = (__ETHTOOL_A_MM_CNT - 1) }; +/* MODULE_FW_FLASH */ + +enum { + ETHTOOL_A_MODULE_FW_FLASH_UNSPEC, + ETHTOOL_A_MODULE_FW_FLASH_HEADER, /* nest - _A_HEADER_* */ + ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME, /* string */ + ETHTOOL_A_MODULE_FW_FLASH_PASSWORD, /* u32 */ + ETHTOOL_A_MODULE_FW_FLASH_STATUS, /* u32 */ + ETHTOOL_A_MODULE_FW_FLASH_STATUS_MSG, /* string */ + ETHTOOL_A_MODULE_FW_FLASH_DONE, /* uint */ + ETHTOOL_A_MODULE_FW_FLASH_TOTAL, /* uint */ + + /* add new constants above here */ + __ETHTOOL_A_MODULE_FW_FLASH_CNT, + ETHTOOL_A_MODULE_FW_FLASH_MAX = (__ETHTOOL_A_MODULE_FW_FLASH_CNT - 1) +}; + /* generic netlink info */ #define ETHTOOL_GENL_NAME "ethtool" #define ETHTOOL_GENL_VERSION 1 diff --git a/include/uapi/linux/fcntl.h b/include/uapi/linux/fcntl.h index 282e90aeb163..c0bcc185fa48 100644 --- a/include/uapi/linux/fcntl.h +++ b/include/uapi/linux/fcntl.h @@ -9,6 +9,14 @@ #define F_GETLEASE (F_LINUX_SPECIFIC_BASE + 1) /* + * Request nofications on a directory. + * See below for events that may be notified. + */ +#define F_NOTIFY (F_LINUX_SPECIFIC_BASE + 2) + +#define F_DUPFD_QUERY (F_LINUX_SPECIFIC_BASE + 3) + +/* * Cancel a blocking posix lock; internal use only until we expose an * asynchronous lock api to userspace: */ @@ -18,12 +26,6 @@ #define F_DUPFD_CLOEXEC (F_LINUX_SPECIFIC_BASE + 6) /* - * Request nofications on a directory. - * See below for events that may be notified. - */ -#define F_NOTIFY (F_LINUX_SPECIFIC_BASE+2) - -/* * Set and get of pipe page size array */ #define F_SETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 7) diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index 45e4e64fd664..753971770733 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -329,12 +329,17 @@ typedef int __bitwise __kernel_rwf_t; /* per-IO negation of O_APPEND */ #define RWF_NOAPPEND ((__force __kernel_rwf_t)0x00000020) +/* Atomic Write */ +#define RWF_ATOMIC ((__force __kernel_rwf_t)0x00000040) + /* mask of flags supported by the kernel */ #define RWF_SUPPORTED (RWF_HIPRI | RWF_DSYNC | RWF_SYNC | RWF_NOWAIT |\ - RWF_APPEND | RWF_NOAPPEND) + RWF_APPEND | RWF_NOAPPEND | RWF_ATOMIC) + +#define PROCFS_IOCTL_MAGIC 'f' /* Pagemap ioctl */ -#define PAGEMAP_SCAN _IOWR('f', 16, struct pm_scan_arg) +#define PAGEMAP_SCAN _IOWR(PROCFS_IOCTL_MAGIC, 16, struct pm_scan_arg) /* Bitmasks provided in pm_scan_args masks and reported in page_region.categories. */ #define PAGE_IS_WPALLOWED (1 << 0) @@ -393,4 +398,158 @@ struct pm_scan_arg { __u64 return_mask; }; +/* /proc/<pid>/maps ioctl */ +#define PROCMAP_QUERY _IOWR(PROCFS_IOCTL_MAGIC, 17, struct procmap_query) + +enum procmap_query_flags { + /* + * VMA permission flags. + * + * Can be used as part of procmap_query.query_flags field to look up + * only VMAs satisfying specified subset of permissions. E.g., specifying + * PROCMAP_QUERY_VMA_READABLE only will return both readable and read/write VMAs, + * while having PROCMAP_QUERY_VMA_READABLE | PROCMAP_QUERY_VMA_WRITABLE will only + * return read/write VMAs, though both executable/non-executable and + * private/shared will be ignored. + * + * PROCMAP_QUERY_VMA_* flags are also returned in procmap_query.vma_flags + * field to specify actual VMA permissions. + */ + PROCMAP_QUERY_VMA_READABLE = 0x01, + PROCMAP_QUERY_VMA_WRITABLE = 0x02, + PROCMAP_QUERY_VMA_EXECUTABLE = 0x04, + PROCMAP_QUERY_VMA_SHARED = 0x08, + /* + * Query modifier flags. + * + * By default VMA that covers provided address is returned, or -ENOENT + * is returned. With PROCMAP_QUERY_COVERING_OR_NEXT_VMA flag set, closest + * VMA with vma_start > addr will be returned if no covering VMA is + * found. + * + * PROCMAP_QUERY_FILE_BACKED_VMA instructs query to consider only VMAs that + * have file backing. Can be combined with PROCMAP_QUERY_COVERING_OR_NEXT_VMA + * to iterate all VMAs with file backing. + */ + PROCMAP_QUERY_COVERING_OR_NEXT_VMA = 0x10, + PROCMAP_QUERY_FILE_BACKED_VMA = 0x20, +}; + +/* + * Input/output argument structured passed into ioctl() call. It can be used + * to query a set of VMAs (Virtual Memory Areas) of a process. + * + * Each field can be one of three kinds, marked in a short comment to the + * right of the field: + * - "in", input argument, user has to provide this value, kernel doesn't modify it; + * - "out", output argument, kernel sets this field with VMA data; + * - "in/out", input and output argument; user provides initial value (used + * to specify maximum allowable buffer size), and kernel sets it to actual + * amount of data written (or zero, if there is no data). + * + * If matching VMA is found (according to criterias specified by + * query_addr/query_flags, all the out fields are filled out, and ioctl() + * returns 0. If there is no matching VMA, -ENOENT will be returned. + * In case of any other error, negative error code other than -ENOENT is + * returned. + * + * Most of the data is similar to the one returned as text in /proc/<pid>/maps + * file, but procmap_query provides more querying flexibility. There are no + * consistency guarantees between subsequent ioctl() calls, but data returned + * for matched VMA is self-consistent. + */ +struct procmap_query { + /* Query struct size, for backwards/forward compatibility */ + __u64 size; + /* + * Query flags, a combination of enum procmap_query_flags values. + * Defines query filtering and behavior, see enum procmap_query_flags. + * + * Input argument, provided by user. Kernel doesn't modify it. + */ + __u64 query_flags; /* in */ + /* + * Query address. By default, VMA that covers this address will + * be looked up. PROCMAP_QUERY_* flags above modify this default + * behavior further. + * + * Input argument, provided by user. Kernel doesn't modify it. + */ + __u64 query_addr; /* in */ + /* VMA starting (inclusive) and ending (exclusive) address, if VMA is found. */ + __u64 vma_start; /* out */ + __u64 vma_end; /* out */ + /* VMA permissions flags. A combination of PROCMAP_QUERY_VMA_* flags. */ + __u64 vma_flags; /* out */ + /* VMA backing page size granularity. */ + __u64 vma_page_size; /* out */ + /* + * VMA file offset. If VMA has file backing, this specifies offset + * within the file that VMA's start address corresponds to. + * Is set to zero if VMA has no backing file. + */ + __u64 vma_offset; /* out */ + /* Backing file's inode number, or zero, if VMA has no backing file. */ + __u64 inode; /* out */ + /* Backing file's device major/minor number, or zero, if VMA has no backing file. */ + __u32 dev_major; /* out */ + __u32 dev_minor; /* out */ + /* + * If set to non-zero value, signals the request to return VMA name + * (i.e., VMA's backing file's absolute path, with " (deleted)" suffix + * appended, if file was unlinked from FS) for matched VMA. VMA name + * can also be some special name (e.g., "[heap]", "[stack]") or could + * be even user-supplied with prctl(PR_SET_VMA, PR_SET_VMA_ANON_NAME). + * + * Kernel will set this field to zero, if VMA has no associated name. + * Otherwise kernel will return actual amount of bytes filled in + * user-supplied buffer (see vma_name_addr field below), including the + * terminating zero. + * + * If VMA name is longer that user-supplied maximum buffer size, + * -E2BIG error is returned. + * + * If this field is set to non-zero value, vma_name_addr should point + * to valid user space memory buffer of at least vma_name_size bytes. + * If set to zero, vma_name_addr should be set to zero as well + */ + __u32 vma_name_size; /* in/out */ + /* + * If set to non-zero value, signals the request to extract and return + * VMA's backing file's build ID, if the backing file is an ELF file + * and it contains embedded build ID. + * + * Kernel will set this field to zero, if VMA has no backing file, + * backing file is not an ELF file, or ELF file has no build ID + * embedded. + * + * Build ID is a binary value (not a string). Kernel will set + * build_id_size field to exact number of bytes used for build ID. + * If build ID is requested and present, but needs more bytes than + * user-supplied maximum buffer size (see build_id_addr field below), + * -E2BIG error will be returned. + * + * If this field is set to non-zero value, build_id_addr should point + * to valid user space memory buffer of at least build_id_size bytes. + * If set to zero, build_id_addr should be set to zero as well + */ + __u32 build_id_size; /* in/out */ + /* + * User-supplied address of a buffer of at least vma_name_size bytes + * for kernel to fill with matched VMA's name (see vma_name_size field + * description above for details). + * + * Should be set to zero if VMA name should not be returned. + */ + __u64 vma_name_addr; /* in */ + /* + * User-supplied address of a buffer of at least build_id_size bytes + * for kernel to fill with matched VMA's ELF build ID, if available + * (see build_id_size field description above for details). + * + * Should be set to zero if build ID should not be returned. + */ + __u64 build_id_addr; /* in */ +}; + #endif /* _UAPI_LINUX_FS_H */ diff --git a/include/uapi/linux/gtp.h b/include/uapi/linux/gtp.h index 3dcdb9e33cba..40f5388d6de0 100644 --- a/include/uapi/linux/gtp.h +++ b/include/uapi/linux/gtp.h @@ -31,6 +31,9 @@ enum gtp_attrs { GTPA_I_TEI, /* for GTPv1 only */ GTPA_O_TEI, /* for GTPv1 only */ GTPA_PAD, + GTPA_PEER_ADDR6, + GTPA_MS_ADDR6, + GTPA_FAMILY, __GTPA_MAX, }; #define GTPA_MAX (__GTPA_MAX - 1) diff --git a/include/uapi/linux/icmpv6.h b/include/uapi/linux/icmpv6.h index ecaece3af38d..4eaab89e2856 100644 --- a/include/uapi/linux/icmpv6.h +++ b/include/uapi/linux/icmpv6.h @@ -112,6 +112,7 @@ struct icmp6hdr { #define ICMPV6_MOBILE_PREFIX_ADV 147 #define ICMPV6_MRDISC_ADV 151 +#define ICMPV6_MRDISC_SOL 152 #define ICMPV6_MSG_MAX 255 diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index ffa637b38c93..6dc258993b17 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -1466,6 +1466,8 @@ enum { IFLA_GTP_ROLE, IFLA_GTP_CREATE_SOCKETS, IFLA_GTP_RESTART_COUNT, + IFLA_GTP_LOCAL, + IFLA_GTP_LOCAL6, __IFLA_GTP_MAX, }; #define IFLA_GTP_MAX (__IFLA_GTP_MAX - 1) @@ -1771,6 +1773,7 @@ enum { IFLA_HSR_PROTOCOL, /* Indicate different protocol than * HSR. For example PRP. */ + IFLA_HSR_INTERLINK, /* HSR interlink network device */ __IFLA_HSR_MAX, }; diff --git a/include/uapi/linux/if_team.h b/include/uapi/linux/if_team.h index 13c61fecb78b..a5c06243a435 100644 --- a/include/uapi/linux/if_team.h +++ b/include/uapi/linux/if_team.h @@ -1,108 +1,78 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* - * include/linux/if_team.h - Network team device driver header - * Copyright (c) 2011 Jiri Pirko <jpirko@redhat.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* Do not edit directly, auto-generated from: */ +/* Documentation/netlink/specs/team.yaml */ +/* YNL-GEN uapi header */ -#ifndef _UAPI_LINUX_IF_TEAM_H_ -#define _UAPI_LINUX_IF_TEAM_H_ +#ifndef _UAPI_LINUX_IF_TEAM_H +#define _UAPI_LINUX_IF_TEAM_H +#define TEAM_GENL_NAME "team" +#define TEAM_GENL_VERSION 1 -#define TEAM_STRING_MAX_LEN 32 - -/********************************** - * NETLINK_GENERIC netlink family. - **********************************/ - -enum { - TEAM_CMD_NOOP, - TEAM_CMD_OPTIONS_SET, - TEAM_CMD_OPTIONS_GET, - TEAM_CMD_PORT_LIST_GET, - - __TEAM_CMD_MAX, - TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1), -}; +#define TEAM_STRING_MAX_LEN 32 +#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event" enum { TEAM_ATTR_UNSPEC, - TEAM_ATTR_TEAM_IFINDEX, /* u32 */ - TEAM_ATTR_LIST_OPTION, /* nest */ - TEAM_ATTR_LIST_PORT, /* nest */ + TEAM_ATTR_TEAM_IFINDEX, + TEAM_ATTR_LIST_OPTION, + TEAM_ATTR_LIST_PORT, __TEAM_ATTR_MAX, - TEAM_ATTR_MAX = __TEAM_ATTR_MAX - 1, + TEAM_ATTR_MAX = (__TEAM_ATTR_MAX - 1) }; -/* Nested layout of get/set msg: - * - * [TEAM_ATTR_LIST_OPTION] - * [TEAM_ATTR_ITEM_OPTION] - * [TEAM_ATTR_OPTION_*], ... - * [TEAM_ATTR_ITEM_OPTION] - * [TEAM_ATTR_OPTION_*], ... - * ... - * [TEAM_ATTR_LIST_PORT] - * [TEAM_ATTR_ITEM_PORT] - * [TEAM_ATTR_PORT_*], ... - * [TEAM_ATTR_ITEM_PORT] - * [TEAM_ATTR_PORT_*], ... - * ... - */ - enum { TEAM_ATTR_ITEM_OPTION_UNSPEC, - TEAM_ATTR_ITEM_OPTION, /* nest */ + TEAM_ATTR_ITEM_OPTION, __TEAM_ATTR_ITEM_OPTION_MAX, - TEAM_ATTR_ITEM_OPTION_MAX = __TEAM_ATTR_ITEM_OPTION_MAX - 1, + TEAM_ATTR_ITEM_OPTION_MAX = (__TEAM_ATTR_ITEM_OPTION_MAX - 1) }; enum { TEAM_ATTR_OPTION_UNSPEC, - TEAM_ATTR_OPTION_NAME, /* string */ - TEAM_ATTR_OPTION_CHANGED, /* flag */ - TEAM_ATTR_OPTION_TYPE, /* u8 */ - TEAM_ATTR_OPTION_DATA, /* dynamic */ - TEAM_ATTR_OPTION_REMOVED, /* flag */ - TEAM_ATTR_OPTION_PORT_IFINDEX, /* u32 */ /* for per-port options */ - TEAM_ATTR_OPTION_ARRAY_INDEX, /* u32 */ /* for array options */ + TEAM_ATTR_OPTION_NAME, + TEAM_ATTR_OPTION_CHANGED, + TEAM_ATTR_OPTION_TYPE, + TEAM_ATTR_OPTION_DATA, + TEAM_ATTR_OPTION_REMOVED, + TEAM_ATTR_OPTION_PORT_IFINDEX, + TEAM_ATTR_OPTION_ARRAY_INDEX, __TEAM_ATTR_OPTION_MAX, - TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1, + TEAM_ATTR_OPTION_MAX = (__TEAM_ATTR_OPTION_MAX - 1) }; enum { TEAM_ATTR_ITEM_PORT_UNSPEC, - TEAM_ATTR_ITEM_PORT, /* nest */ + TEAM_ATTR_ITEM_PORT, __TEAM_ATTR_ITEM_PORT_MAX, - TEAM_ATTR_ITEM_PORT_MAX = __TEAM_ATTR_ITEM_PORT_MAX - 1, + TEAM_ATTR_ITEM_PORT_MAX = (__TEAM_ATTR_ITEM_PORT_MAX - 1) }; enum { TEAM_ATTR_PORT_UNSPEC, - TEAM_ATTR_PORT_IFINDEX, /* u32 */ - TEAM_ATTR_PORT_CHANGED, /* flag */ - TEAM_ATTR_PORT_LINKUP, /* flag */ - TEAM_ATTR_PORT_SPEED, /* u32 */ - TEAM_ATTR_PORT_DUPLEX, /* u8 */ - TEAM_ATTR_PORT_REMOVED, /* flag */ + TEAM_ATTR_PORT_IFINDEX, + TEAM_ATTR_PORT_CHANGED, + TEAM_ATTR_PORT_LINKUP, + TEAM_ATTR_PORT_SPEED, + TEAM_ATTR_PORT_DUPLEX, + TEAM_ATTR_PORT_REMOVED, __TEAM_ATTR_PORT_MAX, - TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1, + TEAM_ATTR_PORT_MAX = (__TEAM_ATTR_PORT_MAX - 1) }; -/* - * NETLINK_GENERIC related info - */ -#define TEAM_GENL_NAME "team" -#define TEAM_GENL_VERSION 0x1 -#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event" +enum { + TEAM_CMD_NOOP, + TEAM_CMD_OPTIONS_SET, + TEAM_CMD_OPTIONS_GET, + TEAM_CMD_PORT_LIST_GET, + + __TEAM_CMD_MAX, + TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1) +}; -#endif /* _UAPI_LINUX_IF_TEAM_H_ */ +#endif /* _UAPI_LINUX_IF_TEAM_H */ diff --git a/include/uapi/linux/if_tunnel.h b/include/uapi/linux/if_tunnel.h index 102119628ff5..e1a246dd8c62 100644 --- a/include/uapi/linux/if_tunnel.h +++ b/include/uapi/linux/if_tunnel.h @@ -161,6 +161,14 @@ enum { #define IFLA_VTI_MAX (__IFLA_VTI_MAX - 1) +#ifndef __KERNEL__ +/* Historically, tunnel flags have been defined as __be16 and now there are + * no free bits left. It is strongly advised to switch the already existing + * userspace code to the new *_BIT definitions from down below, as __be16 + * can't be simply cast to a wider type on LE systems. All new flags and + * code must use *_BIT only. + */ + #define TUNNEL_CSUM __cpu_to_be16(0x01) #define TUNNEL_ROUTING __cpu_to_be16(0x02) #define TUNNEL_KEY __cpu_to_be16(0x04) @@ -181,5 +189,33 @@ enum { #define TUNNEL_OPTIONS_PRESENT \ (TUNNEL_GENEVE_OPT | TUNNEL_VXLAN_OPT | TUNNEL_ERSPAN_OPT | \ TUNNEL_GTP_OPT) +#endif + +enum { + IP_TUNNEL_CSUM_BIT = 0U, + IP_TUNNEL_ROUTING_BIT, + IP_TUNNEL_KEY_BIT, + IP_TUNNEL_SEQ_BIT, + IP_TUNNEL_STRICT_BIT, + IP_TUNNEL_REC_BIT, + IP_TUNNEL_VERSION_BIT, + IP_TUNNEL_NO_KEY_BIT, + IP_TUNNEL_DONT_FRAGMENT_BIT, + IP_TUNNEL_OAM_BIT, + IP_TUNNEL_CRIT_OPT_BIT, + IP_TUNNEL_GENEVE_OPT_BIT, /* OPTIONS_PRESENT */ + IP_TUNNEL_VXLAN_OPT_BIT, /* OPTIONS_PRESENT */ + IP_TUNNEL_NOCACHE_BIT, + IP_TUNNEL_ERSPAN_OPT_BIT, /* OPTIONS_PRESENT */ + IP_TUNNEL_GTP_OPT_BIT, /* OPTIONS_PRESENT */ + + IP_TUNNEL_VTI_BIT, + IP_TUNNEL_SIT_ISATAP_BIT = IP_TUNNEL_VTI_BIT, + + /* Flags starting from here are not available via the old UAPI */ + IP_TUNNEL_PFCP_OPT_BIT, /* OPTIONS_PRESENT */ + + __IP_TUNNEL_FLAG_NUM, +}; #endif /* _UAPI_IF_TUNNEL_H_ */ diff --git a/include/uapi/linux/if_xdp.h b/include/uapi/linux/if_xdp.h index d31698410410..42ec5ddaab8d 100644 --- a/include/uapi/linux/if_xdp.h +++ b/include/uapi/linux/if_xdp.h @@ -41,6 +41,10 @@ */ #define XDP_UMEM_TX_SW_CSUM (1 << 1) +/* Request to reserve tx_metadata_len bytes of per-chunk metadata. + */ +#define XDP_UMEM_TX_METADATA_LEN (1 << 2) + struct sockaddr_xdp { __u16 sxdp_family; __u16 sxdp_flags; diff --git a/include/uapi/linux/iio/buffer.h b/include/uapi/linux/iio/buffer.h index 13939032b3f6..c666aa95e532 100644 --- a/include/uapi/linux/iio/buffer.h +++ b/include/uapi/linux/iio/buffer.h @@ -5,6 +5,28 @@ #ifndef _UAPI_IIO_BUFFER_H_ #define _UAPI_IIO_BUFFER_H_ +#include <linux/types.h> + +/* Flags for iio_dmabuf.flags */ +#define IIO_BUFFER_DMABUF_CYCLIC (1 << 0) +#define IIO_BUFFER_DMABUF_SUPPORTED_FLAGS 0x00000001 + +/** + * struct iio_dmabuf - Descriptor for a single IIO DMABUF object + * @fd: file descriptor of the DMABUF object + * @flags: one or more IIO_BUFFER_DMABUF_* flags + * @bytes_used: number of bytes used in this DMABUF for the data transfer. + * Should generally be set to the DMABUF's size. + */ +struct iio_dmabuf { + __u32 fd; + __u32 flags; + __u64 bytes_used; +}; + #define IIO_BUFFER_GET_FD_IOCTL _IOWR('i', 0x91, int) +#define IIO_BUFFER_DMABUF_ATTACH_IOCTL _IOW('i', 0x92, int) +#define IIO_BUFFER_DMABUF_DETACH_IOCTL _IOW('i', 0x93, int) +#define IIO_BUFFER_DMABUF_ENQUEUE_IOCTL _IOW('i', 0x94, struct iio_dmabuf) #endif /* _UAPI_IIO_BUFFER_H_ */ diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h index e682ab628dfa..d358add1611c 100644 --- a/include/uapi/linux/in.h +++ b/include/uapi/linux/in.h @@ -81,6 +81,8 @@ enum { #define IPPROTO_ETHERNET IPPROTO_ETHERNET IPPROTO_RAW = 255, /* Raw IP packets */ #define IPPROTO_RAW IPPROTO_RAW + IPPROTO_SMC = 256, /* Shared Memory Communications */ +#define IPPROTO_SMC IPPROTO_SMC IPPROTO_MPTCP = 262, /* Multipath TCP connection */ #define IPPROTO_MPTCP IPPROTO_MPTCP IPPROTO_MAX diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h index 03edf2ccdf6c..a4206723f503 100644 --- a/include/uapi/linux/input-event-codes.h +++ b/include/uapi/linux/input-event-codes.h @@ -618,6 +618,8 @@ #define KEY_CAMERA_ACCESS_ENABLE 0x24b /* Enables programmatic access to camera devices. (HUTRR72) */ #define KEY_CAMERA_ACCESS_DISABLE 0x24c /* Disables programmatic access to camera devices. (HUTRR72) */ #define KEY_CAMERA_ACCESS_TOGGLE 0x24d /* Toggles the current state of the camera access control. (HUTRR72) */ +#define KEY_ACCESSIBILITY 0x24e /* Toggles the system bound accessibility UI/command (HUTRR116) */ +#define KEY_DO_NOT_DISTURB 0x24f /* Toggles the system-wide "Do Not Disturb" control (HUTRR94)*/ #define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */ #define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */ diff --git a/include/uapi/linux/io_uring.h b/include/uapi/linux/io_uring.h index 7bd10201a02b..2aaf7ee256ac 100644 --- a/include/uapi/linux/io_uring.h +++ b/include/uapi/linux/io_uring.h @@ -72,6 +72,7 @@ struct io_uring_sqe { __u32 waitid_flags; __u32 futex_flags; __u32 install_fd_flags; + __u32 nop_flags; }; __u64 user_data; /* data to be passed back at completion time */ /* pack this to avoid bogus arm OABI complaints */ @@ -115,7 +116,7 @@ struct io_uring_sqe { */ #define IORING_FILE_INDEX_ALLOC (~0U) -enum { +enum io_uring_sqe_flags_bit { IOSQE_FIXED_FILE_BIT, IOSQE_IO_DRAIN_BIT, IOSQE_IO_LINK_BIT, @@ -256,6 +257,8 @@ enum io_uring_op { IORING_OP_FUTEX_WAITV, IORING_OP_FIXED_FD_INSTALL, IORING_OP_FTRUNCATE, + IORING_OP_BIND, + IORING_OP_LISTEN, /* this goes last, obviously */ IORING_OP_LAST, @@ -351,11 +354,20 @@ enum io_uring_op { * 0 is reported if zerocopy was actually possible. * IORING_NOTIF_USAGE_ZC_COPIED if data was copied * (at least partially). + * + * IORING_RECVSEND_BUNDLE Used with IOSQE_BUFFER_SELECT. If set, send or + * recv will grab as many buffers from the buffer + * group ID given and send them all. The completion + * result will be the number of buffers send, with + * the starting buffer ID in cqe->flags as per + * usual for provided buffer usage. The buffers + * will be contigious from the starting buffer ID. */ #define IORING_RECVSEND_POLL_FIRST (1U << 0) #define IORING_RECV_MULTISHOT (1U << 1) #define IORING_RECVSEND_FIXED_BUF (1U << 2) #define IORING_SEND_ZC_REPORT_USAGE (1U << 3) +#define IORING_RECVSEND_BUNDLE (1U << 4) /* * cqe.res for IORING_CQE_F_NOTIF if @@ -370,11 +382,13 @@ enum io_uring_op { * accept flags stored in sqe->ioprio */ #define IORING_ACCEPT_MULTISHOT (1U << 0) +#define IORING_ACCEPT_DONTWAIT (1U << 1) +#define IORING_ACCEPT_POLL_FIRST (1U << 2) /* * IORING_OP_MSG_RING command types, stored in sqe->addr */ -enum { +enum io_uring_msg_ring_flags { IORING_MSG_DATA, /* pass sqe->len as 'res' and off as user_data */ IORING_MSG_SEND_FD, /* send a registered fd to another ring */ }; @@ -397,6 +411,13 @@ enum { #define IORING_FIXED_FD_NO_CLOEXEC (1U << 0) /* + * IORING_OP_NOP flags (sqe->nop_flags) + * + * IORING_NOP_INJECT_RESULT Inject result from sqe->result + */ +#define IORING_NOP_INJECT_RESULT (1U << 0) + +/* * IO completion data structure (Completion Queue Entry) */ struct io_uring_cqe { @@ -425,9 +446,7 @@ struct io_uring_cqe { #define IORING_CQE_F_SOCK_NONEMPTY (1U << 2) #define IORING_CQE_F_NOTIF (1U << 3) -enum { - IORING_CQE_BUFFER_SHIFT = 16, -}; +#define IORING_CQE_BUFFER_SHIFT 16 /* * Magic offsets for the application to mmap the data it needs @@ -522,11 +541,12 @@ struct io_uring_params { #define IORING_FEAT_CQE_SKIP (1U << 11) #define IORING_FEAT_LINKED_FILE (1U << 12) #define IORING_FEAT_REG_REG_RING (1U << 13) +#define IORING_FEAT_RECVSEND_BUNDLE (1U << 14) /* * io_uring_register(2) opcodes and arguments */ -enum { +enum io_uring_register_op { IORING_REGISTER_BUFFERS = 0, IORING_UNREGISTER_BUFFERS = 1, IORING_REGISTER_FILES = 2, @@ -583,7 +603,7 @@ enum { }; /* io-wq worker categories */ -enum { +enum io_wq_type { IO_WQ_BOUND, IO_WQ_UNBOUND, }; @@ -688,7 +708,7 @@ struct io_uring_buf_ring { * IORING_OFF_PBUF_RING | (bgid << IORING_OFF_PBUF_SHIFT) * to get a virtual mapping for the ring. */ -enum { +enum io_uring_register_pbuf_ring_flags { IOU_PBUF_RING_MMAP = 1, }; @@ -719,7 +739,7 @@ struct io_uring_napi { /* * io_uring_restriction->opcode values */ -enum { +enum io_uring_register_restriction_op { /* Allow an io_uring_register(2) opcode */ IORING_RESTRICTION_REGISTER_OP = 0, @@ -775,7 +795,7 @@ struct io_uring_recvmsg_out { /* * Argument for IORING_OP_URING_CMD when file is a socket */ -enum { +enum io_uring_socket_op { SOCKET_URING_OP_SIOCINQ = 0, SOCKET_URING_OP_SIOCOUTQ, SOCKET_URING_OP_GETSOCKOPT, diff --git a/include/uapi/linux/iommufd.h b/include/uapi/linux/iommufd.h index 1dfeaa2e649e..4dde745cfb7e 100644 --- a/include/uapi/linux/iommufd.h +++ b/include/uapi/linux/iommufd.h @@ -37,19 +37,20 @@ enum { IOMMUFD_CMD_BASE = 0x80, IOMMUFD_CMD_DESTROY = IOMMUFD_CMD_BASE, - IOMMUFD_CMD_IOAS_ALLOC, - IOMMUFD_CMD_IOAS_ALLOW_IOVAS, - IOMMUFD_CMD_IOAS_COPY, - IOMMUFD_CMD_IOAS_IOVA_RANGES, - IOMMUFD_CMD_IOAS_MAP, - IOMMUFD_CMD_IOAS_UNMAP, - IOMMUFD_CMD_OPTION, - IOMMUFD_CMD_VFIO_IOAS, - IOMMUFD_CMD_HWPT_ALLOC, - IOMMUFD_CMD_GET_HW_INFO, - IOMMUFD_CMD_HWPT_SET_DIRTY_TRACKING, - IOMMUFD_CMD_HWPT_GET_DIRTY_BITMAP, - IOMMUFD_CMD_HWPT_INVALIDATE, + IOMMUFD_CMD_IOAS_ALLOC = 0x81, + IOMMUFD_CMD_IOAS_ALLOW_IOVAS = 0x82, + IOMMUFD_CMD_IOAS_COPY = 0x83, + IOMMUFD_CMD_IOAS_IOVA_RANGES = 0x84, + IOMMUFD_CMD_IOAS_MAP = 0x85, + IOMMUFD_CMD_IOAS_UNMAP = 0x86, + IOMMUFD_CMD_OPTION = 0x87, + IOMMUFD_CMD_VFIO_IOAS = 0x88, + IOMMUFD_CMD_HWPT_ALLOC = 0x89, + IOMMUFD_CMD_GET_HW_INFO = 0x8a, + IOMMUFD_CMD_HWPT_SET_DIRTY_TRACKING = 0x8b, + IOMMUFD_CMD_HWPT_GET_DIRTY_BITMAP = 0x8c, + IOMMUFD_CMD_HWPT_INVALIDATE = 0x8d, + IOMMUFD_CMD_FAULT_QUEUE_ALLOC = 0x8e, }; /** @@ -356,10 +357,13 @@ struct iommu_vfio_ioas { * the parent HWPT in a nesting configuration. * @IOMMU_HWPT_ALLOC_DIRTY_TRACKING: Dirty tracking support for device IOMMU is * enforced on device attachment + * @IOMMU_HWPT_FAULT_ID_VALID: The fault_id field of hwpt allocation data is + * valid. */ enum iommufd_hwpt_alloc_flags { IOMMU_HWPT_ALLOC_NEST_PARENT = 1 << 0, IOMMU_HWPT_ALLOC_DIRTY_TRACKING = 1 << 1, + IOMMU_HWPT_FAULT_ID_VALID = 1 << 2, }; /** @@ -396,8 +400,8 @@ struct iommu_hwpt_vtd_s1 { * @IOMMU_HWPT_DATA_VTD_S1: Intel VT-d stage-1 page table */ enum iommu_hwpt_data_type { - IOMMU_HWPT_DATA_NONE, - IOMMU_HWPT_DATA_VTD_S1, + IOMMU_HWPT_DATA_NONE = 0, + IOMMU_HWPT_DATA_VTD_S1 = 1, }; /** @@ -411,6 +415,9 @@ enum iommu_hwpt_data_type { * @data_type: One of enum iommu_hwpt_data_type * @data_len: Length of the type specific data * @data_uptr: User pointer to the type specific data + * @fault_id: The ID of IOMMUFD_FAULT object. Valid only if flags field of + * IOMMU_HWPT_FAULT_ID_VALID is set. + * @__reserved2: Padding to 64-bit alignment. Must be 0. * * Explicitly allocate a hardware page table object. This is the same object * type that is returned by iommufd_device_attach() and represents the @@ -441,6 +448,8 @@ struct iommu_hwpt_alloc { __u32 data_type; __u32 data_len; __aligned_u64 data_uptr; + __u32 fault_id; + __u32 __reserved2; }; #define IOMMU_HWPT_ALLOC _IO(IOMMUFD_TYPE, IOMMUFD_CMD_HWPT_ALLOC) @@ -482,8 +491,8 @@ struct iommu_hw_info_vtd { * @IOMMU_HW_INFO_TYPE_INTEL_VTD: Intel VT-d iommu info type */ enum iommu_hw_info_type { - IOMMU_HW_INFO_TYPE_NONE, - IOMMU_HW_INFO_TYPE_INTEL_VTD, + IOMMU_HW_INFO_TYPE_NONE = 0, + IOMMU_HW_INFO_TYPE_INTEL_VTD = 1, }; /** @@ -620,7 +629,7 @@ struct iommu_hwpt_get_dirty_bitmap { * @IOMMU_HWPT_INVALIDATE_DATA_VTD_S1: Invalidation data for VTD_S1 */ enum iommu_hwpt_invalidate_data_type { - IOMMU_HWPT_INVALIDATE_DATA_VTD_S1, + IOMMU_HWPT_INVALIDATE_DATA_VTD_S1 = 0, }; /** @@ -692,4 +701,100 @@ struct iommu_hwpt_invalidate { __u32 __reserved; }; #define IOMMU_HWPT_INVALIDATE _IO(IOMMUFD_TYPE, IOMMUFD_CMD_HWPT_INVALIDATE) + +/** + * enum iommu_hwpt_pgfault_flags - flags for struct iommu_hwpt_pgfault + * @IOMMU_PGFAULT_FLAGS_PASID_VALID: The pasid field of the fault data is + * valid. + * @IOMMU_PGFAULT_FLAGS_LAST_PAGE: It's the last fault of a fault group. + */ +enum iommu_hwpt_pgfault_flags { + IOMMU_PGFAULT_FLAGS_PASID_VALID = (1 << 0), + IOMMU_PGFAULT_FLAGS_LAST_PAGE = (1 << 1), +}; + +/** + * enum iommu_hwpt_pgfault_perm - perm bits for struct iommu_hwpt_pgfault + * @IOMMU_PGFAULT_PERM_READ: request for read permission + * @IOMMU_PGFAULT_PERM_WRITE: request for write permission + * @IOMMU_PGFAULT_PERM_EXEC: (PCIE 10.4.1) request with a PASID that has the + * Execute Requested bit set in PASID TLP Prefix. + * @IOMMU_PGFAULT_PERM_PRIV: (PCIE 10.4.1) request with a PASID that has the + * Privileged Mode Requested bit set in PASID TLP + * Prefix. + */ +enum iommu_hwpt_pgfault_perm { + IOMMU_PGFAULT_PERM_READ = (1 << 0), + IOMMU_PGFAULT_PERM_WRITE = (1 << 1), + IOMMU_PGFAULT_PERM_EXEC = (1 << 2), + IOMMU_PGFAULT_PERM_PRIV = (1 << 3), +}; + +/** + * struct iommu_hwpt_pgfault - iommu page fault data + * @flags: Combination of enum iommu_hwpt_pgfault_flags + * @dev_id: id of the originated device + * @pasid: Process Address Space ID + * @grpid: Page Request Group Index + * @perm: Combination of enum iommu_hwpt_pgfault_perm + * @addr: Fault address + * @length: a hint of how much data the requestor is expecting to fetch. For + * example, if the PRI initiator knows it is going to do a 10MB + * transfer, it could fill in 10MB and the OS could pre-fault in + * 10MB of IOVA. It's default to 0 if there's no such hint. + * @cookie: kernel-managed cookie identifying a group of fault messages. The + * cookie number encoded in the last page fault of the group should + * be echoed back in the response message. + */ +struct iommu_hwpt_pgfault { + __u32 flags; + __u32 dev_id; + __u32 pasid; + __u32 grpid; + __u32 perm; + __u64 addr; + __u32 length; + __u32 cookie; +}; + +/** + * enum iommufd_page_response_code - Return status of fault handlers + * @IOMMUFD_PAGE_RESP_SUCCESS: Fault has been handled and the page tables + * populated, retry the access. This is the + * "Success" defined in PCI 10.4.2.1. + * @IOMMUFD_PAGE_RESP_INVALID: Could not handle this fault, don't retry the + * access. This is the "Invalid Request" in PCI + * 10.4.2.1. + */ +enum iommufd_page_response_code { + IOMMUFD_PAGE_RESP_SUCCESS = 0, + IOMMUFD_PAGE_RESP_INVALID = 1, +}; + +/** + * struct iommu_hwpt_page_response - IOMMU page fault response + * @cookie: The kernel-managed cookie reported in the fault message. + * @code: One of response code in enum iommufd_page_response_code. + */ +struct iommu_hwpt_page_response { + __u32 cookie; + __u32 code; +}; + +/** + * struct iommu_fault_alloc - ioctl(IOMMU_FAULT_QUEUE_ALLOC) + * @size: sizeof(struct iommu_fault_alloc) + * @flags: Must be 0 + * @out_fault_id: The ID of the new FAULT + * @out_fault_fd: The fd of the new FAULT + * + * Explicitly allocate a fault handling object. + */ +struct iommu_fault_alloc { + __u32 size; + __u32 flags; + __u32 out_fault_id; + __u32 out_fault_fd; +}; +#define IOMMU_FAULT_QUEUE_ALLOC _IO(IOMMUFD_TYPE, IOMMUFD_CMD_FAULT_QUEUE_ALLOC) #endif diff --git a/include/uapi/linux/kexec.h b/include/uapi/linux/kexec.h index c17bb096ea68..5ae1741ea8ea 100644 --- a/include/uapi/linux/kexec.h +++ b/include/uapi/linux/kexec.h @@ -13,6 +13,7 @@ #define KEXEC_ON_CRASH 0x00000001 #define KEXEC_PRESERVE_CONTEXT 0x00000002 #define KEXEC_UPDATE_ELFCOREHDR 0x00000004 +#define KEXEC_CRASH_HOTPLUG_SUPPORT 0x00000008 #define KEXEC_ARCH_MASK 0xffff0000 /* diff --git a/include/uapi/linux/kfd_ioctl.h b/include/uapi/linux/kfd_ioctl.h index 9ce46edc62a5..285a36601dc9 100644 --- a/include/uapi/linux/kfd_ioctl.h +++ b/include/uapi/linux/kfd_ioctl.h @@ -41,9 +41,10 @@ * - 1.13 - Add debugger API * - 1.14 - Update kfd_event_data * - 1.15 - Enable managing mappings in compute VMs with GEM_VA ioctl + * - 1.16 - Add contiguous VRAM allocation flag */ #define KFD_IOCTL_MAJOR_VERSION 1 -#define KFD_IOCTL_MINOR_VERSION 15 +#define KFD_IOCTL_MINOR_VERSION 16 struct kfd_ioctl_get_version_args { __u32 major_version; /* from KFD */ @@ -407,6 +408,7 @@ struct kfd_ioctl_acquire_vm_args { #define KFD_IOC_ALLOC_MEM_FLAGS_COHERENT (1 << 26) #define KFD_IOC_ALLOC_MEM_FLAGS_UNCACHED (1 << 25) #define KFD_IOC_ALLOC_MEM_FLAGS_EXT_COHERENT (1 << 24) +#define KFD_IOC_ALLOC_MEM_FLAGS_CONTIGUOUS (1 << 23) /* Allocate memory for later SVM (shared virtual memory) mapping. * @@ -852,6 +854,7 @@ enum kfd_dbg_trap_address_watch_mode { /* Additional wave settings */ enum kfd_dbg_trap_flags { KFD_DBG_TRAP_FLAG_SINGLE_MEM_OP = 1, + KFD_DBG_TRAP_FLAG_SINGLE_ALU_OP = 2, }; /* Trap exceptions */ @@ -913,14 +916,25 @@ enum kfd_dbg_trap_exception_code { KFD_EC_MASK(EC_DEVICE_NEW)) #define KFD_EC_MASK_PROCESS (KFD_EC_MASK(EC_PROCESS_RUNTIME) | \ KFD_EC_MASK(EC_PROCESS_DEVICE_REMOVE)) +#define KFD_EC_MASK_PACKET (KFD_EC_MASK(EC_QUEUE_PACKET_DISPATCH_DIM_INVALID) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_DISPATCH_GROUP_SEGMENT_SIZE_INVALID) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_DISPATCH_CODE_INVALID) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_RESERVED) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_UNSUPPORTED) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_DISPATCH_WORK_GROUP_SIZE_INVALID) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_DISPATCH_REGISTER_INVALID) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_VENDOR_UNSUPPORTED)) /* Checks for exception code types for KFD search */ +#define KFD_DBG_EC_IS_VALID(ecode) (ecode > EC_NONE && ecode < EC_MAX) #define KFD_DBG_EC_TYPE_IS_QUEUE(ecode) \ - (!!(KFD_EC_MASK(ecode) & KFD_EC_MASK_QUEUE)) + (KFD_DBG_EC_IS_VALID(ecode) && !!(KFD_EC_MASK(ecode) & KFD_EC_MASK_QUEUE)) #define KFD_DBG_EC_TYPE_IS_DEVICE(ecode) \ - (!!(KFD_EC_MASK(ecode) & KFD_EC_MASK_DEVICE)) + (KFD_DBG_EC_IS_VALID(ecode) && !!(KFD_EC_MASK(ecode) & KFD_EC_MASK_DEVICE)) #define KFD_DBG_EC_TYPE_IS_PROCESS(ecode) \ - (!!(KFD_EC_MASK(ecode) & KFD_EC_MASK_PROCESS)) + (KFD_DBG_EC_IS_VALID(ecode) && !!(KFD_EC_MASK(ecode) & KFD_EC_MASK_PROCESS)) +#define KFD_DBG_EC_TYPE_IS_PACKET(ecode) \ + (KFD_DBG_EC_IS_VALID(ecode) && !!(KFD_EC_MASK(ecode) & KFD_EC_MASK_PACKET)) /* Runtime enable states */ diff --git a/include/uapi/linux/kfd_sysfs.h b/include/uapi/linux/kfd_sysfs.h index a51b7331e0b4..5e8d28617efa 100644 --- a/include/uapi/linux/kfd_sysfs.h +++ b/include/uapi/linux/kfd_sysfs.h @@ -51,15 +51,16 @@ /* Old buggy user mode depends on this being 0 */ #define HSA_CAP_RESERVED_WAS_SRAM_EDCSUPPORTED 0x00080000 -#define HSA_CAP_MEM_EDCSUPPORTED 0x00100000 -#define HSA_CAP_RASEVENTNOTIFY 0x00200000 -#define HSA_CAP_ASIC_REVISION_MASK 0x03c00000 -#define HSA_CAP_ASIC_REVISION_SHIFT 22 -#define HSA_CAP_SRAM_EDCSUPPORTED 0x04000000 -#define HSA_CAP_SVMAPI_SUPPORTED 0x08000000 -#define HSA_CAP_FLAGS_COHERENTHOSTACCESS 0x10000000 -#define HSA_CAP_TRAP_DEBUG_FIRMWARE_SUPPORTED 0x20000000 -#define HSA_CAP_RESERVED 0xe00f8000 +#define HSA_CAP_MEM_EDCSUPPORTED 0x00100000 +#define HSA_CAP_RASEVENTNOTIFY 0x00200000 +#define HSA_CAP_ASIC_REVISION_MASK 0x03c00000 +#define HSA_CAP_ASIC_REVISION_SHIFT 22 +#define HSA_CAP_SRAM_EDCSUPPORTED 0x04000000 +#define HSA_CAP_SVMAPI_SUPPORTED 0x08000000 +#define HSA_CAP_FLAGS_COHERENTHOSTACCESS 0x10000000 +#define HSA_CAP_TRAP_DEBUG_FIRMWARE_SUPPORTED 0x20000000 +#define HSA_CAP_TRAP_DEBUG_PRECISE_ALU_OPERATIONS_SUPPORTED 0x40000000 +#define HSA_CAP_RESERVED 0x800f8000 /* debug_prop bits in node properties */ #define HSA_DBG_WATCH_ADDR_MASK_LO_BIT_MASK 0x0000000f diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 2190adbe3002..637efc055145 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -192,11 +192,24 @@ struct kvm_xen_exit { /* Flags that describe what fields in emulation_failure hold valid data. */ #define KVM_INTERNAL_ERROR_EMULATION_FLAG_INSTRUCTION_BYTES (1ULL << 0) +/* + * struct kvm_run can be modified by userspace at any time, so KVM must be + * careful to avoid TOCTOU bugs. In order to protect KVM, HINT_UNSAFE_IN_KVM() + * renames fields in struct kvm_run from <symbol> to <symbol>__unsafe when + * compiled into the kernel, ensuring that any use within KVM is obvious and + * gets extra scrutiny. + */ +#ifdef __KERNEL__ +#define HINT_UNSAFE_IN_KVM(_symbol) _symbol##__unsafe +#else +#define HINT_UNSAFE_IN_KVM(_symbol) _symbol +#endif + /* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */ struct kvm_run { /* in */ __u8 request_interrupt_window; - __u8 immediate_exit; + __u8 HINT_UNSAFE_IN_KVM(immediate_exit); __u8 padding1[6]; /* out */ @@ -917,6 +930,9 @@ struct kvm_enable_cap { #define KVM_CAP_MEMORY_ATTRIBUTES 233 #define KVM_CAP_GUEST_MEMFD 234 #define KVM_CAP_VM_TYPES 235 +#define KVM_CAP_PRE_FAULT_MEMORY 236 +#define KVM_CAP_X86_APIC_BUS_CYCLES_NS 237 +#define KVM_CAP_X86_GUEST_MODE 238 struct kvm_irq_routing_irqchip { __u32 irqchip; @@ -1221,9 +1237,9 @@ struct kvm_vfio_spapr_tce { /* Available with KVM_CAP_SPAPR_RESIZE_HPT */ #define KVM_PPC_RESIZE_HPT_PREPARE _IOR(KVMIO, 0xad, struct kvm_ppc_resize_hpt) #define KVM_PPC_RESIZE_HPT_COMMIT _IOR(KVMIO, 0xae, struct kvm_ppc_resize_hpt) -/* Available with KVM_CAP_PPC_RADIX_MMU or KVM_CAP_PPC_HASH_MMU_V3 */ +/* Available with KVM_CAP_PPC_MMU_RADIX or KVM_CAP_PPC_MMU_HASH_V3 */ #define KVM_PPC_CONFIGURE_V3_MMU _IOW(KVMIO, 0xaf, struct kvm_ppc_mmuv3_cfg) -/* Available with KVM_CAP_PPC_RADIX_MMU */ +/* Available with KVM_CAP_PPC_MMU_RADIX */ #define KVM_PPC_GET_RMMU_INFO _IOW(KVMIO, 0xb0, struct kvm_ppc_rmmu_info) /* Available with KVM_CAP_PPC_GET_CPU_CHAR */ #define KVM_PPC_GET_CPU_CHAR _IOR(KVMIO, 0xb1, struct kvm_ppc_cpu_char) @@ -1548,4 +1564,13 @@ struct kvm_create_guest_memfd { __u64 reserved[6]; }; +#define KVM_PRE_FAULT_MEMORY _IOWR(KVMIO, 0xd5, struct kvm_pre_fault_memory) + +struct kvm_pre_fault_memory { + __u64 gpa; + __u64 size; + __u64 flags; + __u64 padding[5]; +}; + #endif /* __LINUX_KVM_H */ diff --git a/include/uapi/linux/landlock.h b/include/uapi/linux/landlock.h index 25c8d7677539..2c8dbc74b955 100644 --- a/include/uapi/linux/landlock.h +++ b/include/uapi/linux/landlock.h @@ -12,29 +12,36 @@ #include <linux/types.h> /** - * struct landlock_ruleset_attr - Ruleset definition + * struct landlock_ruleset_attr - Ruleset definition. * - * Argument of sys_landlock_create_ruleset(). This structure can grow in - * future versions. + * Argument of sys_landlock_create_ruleset(). + * + * This structure defines a set of *handled access rights*, a set of actions on + * different object types, which should be denied by default when the ruleset is + * enacted. Vice versa, access rights that are not specifically listed here are + * not going to be denied by this ruleset when it is enacted. + * + * For historical reasons, the %LANDLOCK_ACCESS_FS_REFER right is always denied + * by default, even when its bit is not set in @handled_access_fs. In order to + * add new rules with this access right, the bit must still be set explicitly + * (cf. `Filesystem flags`_). + * + * The explicit listing of *handled access rights* is required for backwards + * compatibility reasons. In most use cases, processes that use Landlock will + * *handle* a wide range or all access rights that they know about at build time + * (and that they have tested with a kernel that supported them all). + * + * This structure can grow in future Landlock versions. */ struct landlock_ruleset_attr { /** - * @handled_access_fs: Bitmask of actions (cf. `Filesystem flags`_) - * that is handled by this ruleset and should then be forbidden if no - * rule explicitly allow them: it is a deny-by-default list that should - * contain as much Landlock access rights as possible. Indeed, all - * Landlock filesystem access rights that are not part of - * handled_access_fs are allowed. This is needed for backward - * compatibility reasons. One exception is the - * %LANDLOCK_ACCESS_FS_REFER access right, which is always implicitly - * handled, but must still be explicitly handled to add new rules with - * this access right. + * @handled_access_fs: Bitmask of handled filesystem actions + * (cf. `Filesystem flags`_). */ __u64 handled_access_fs; /** - * @handled_access_net: Bitmask of actions (cf. `Network flags`_) - * that is handled by this ruleset and should then be forbidden if no - * rule explicitly allow them. + * @handled_access_net: Bitmask of handled network actions (cf. `Network + * flags`_). */ __u64 handled_access_net; }; @@ -97,20 +104,21 @@ struct landlock_path_beneath_attr { */ struct landlock_net_port_attr { /** - * @allowed_access: Bitmask of allowed access network for a port + * @allowed_access: Bitmask of allowed network actions for a port * (cf. `Network flags`_). */ __u64 allowed_access; /** * @port: Network port in host endianness. * - * It should be noted that port 0 passed to :manpage:`bind(2)` will - * bind to an available port from a specific port range. This can be - * configured thanks to the ``/proc/sys/net/ipv4/ip_local_port_range`` - * sysctl (also used for IPv6). A Landlock rule with port 0 and the - * ``LANDLOCK_ACCESS_NET_BIND_TCP`` right means that requesting to bind - * on port 0 is allowed and it will automatically translate to binding - * on the related port range. + * It should be noted that port 0 passed to :manpage:`bind(2)` will bind + * to an available port from the ephemeral port range. This can be + * configured with the ``/proc/sys/net/ipv4/ip_local_port_range`` sysctl + * (also used for IPv6). + * + * A Landlock rule with port 0 and the ``LANDLOCK_ACCESS_NET_BIND_TCP`` + * right means that requesting to bind on port 0 is allowed and it will + * automatically translate to binding on the related port range. */ __u64 port; }; @@ -128,22 +136,23 @@ struct landlock_net_port_attr { * files and directories. Files or directories opened before the sandboxing * are not subject to these restrictions. * - * A file can only receive these access rights: + * The following access rights apply only to files: * * - %LANDLOCK_ACCESS_FS_EXECUTE: Execute a file. - * - %LANDLOCK_ACCESS_FS_WRITE_FILE: Open a file with write access. Note that - * you might additionally need the %LANDLOCK_ACCESS_FS_TRUNCATE right in order - * to overwrite files with :manpage:`open(2)` using ``O_TRUNC`` or - * :manpage:`creat(2)`. + * - %LANDLOCK_ACCESS_FS_WRITE_FILE: Open a file with write access. When + * opening files for writing, you will often additionally need the + * %LANDLOCK_ACCESS_FS_TRUNCATE right. In many cases, these system calls + * truncate existing files when overwriting them (e.g., :manpage:`creat(2)`). * - %LANDLOCK_ACCESS_FS_READ_FILE: Open a file with read access. * - %LANDLOCK_ACCESS_FS_TRUNCATE: Truncate a file with :manpage:`truncate(2)`, * :manpage:`ftruncate(2)`, :manpage:`creat(2)`, or :manpage:`open(2)` with - * ``O_TRUNC``. Whether an opened file can be truncated with - * :manpage:`ftruncate(2)` is determined during :manpage:`open(2)`, in the - * same way as read and write permissions are checked during - * :manpage:`open(2)` using %LANDLOCK_ACCESS_FS_READ_FILE and - * %LANDLOCK_ACCESS_FS_WRITE_FILE. This access right is available since the - * third version of the Landlock ABI. + * ``O_TRUNC``. This access right is available since the third version of the + * Landlock ABI. + * + * Whether an opened file can be truncated with :manpage:`ftruncate(2)` or used + * with `ioctl(2)` is determined during :manpage:`open(2)`, in the same way as + * read and write permissions are checked during :manpage:`open(2)` using + * %LANDLOCK_ACCESS_FS_READ_FILE and %LANDLOCK_ACCESS_FS_WRITE_FILE. * * A directory can receive access rights related to files or directories. The * following access right is applied to the directory itself, and the @@ -198,13 +207,33 @@ struct landlock_net_port_attr { * If multiple requirements are not met, the ``EACCES`` error code takes * precedence over ``EXDEV``. * + * The following access right applies both to files and directories: + * + * - %LANDLOCK_ACCESS_FS_IOCTL_DEV: Invoke :manpage:`ioctl(2)` commands on an opened + * character or block device. + * + * This access right applies to all `ioctl(2)` commands implemented by device + * drivers. However, the following common IOCTL commands continue to be + * invokable independent of the %LANDLOCK_ACCESS_FS_IOCTL_DEV right: + * + * * IOCTL commands targeting file descriptors (``FIOCLEX``, ``FIONCLEX``), + * * IOCTL commands targeting file descriptions (``FIONBIO``, ``FIOASYNC``), + * * IOCTL commands targeting file systems (``FIFREEZE``, ``FITHAW``, + * ``FIGETBSZ``, ``FS_IOC_GETFSUUID``, ``FS_IOC_GETFSSYSFSPATH``) + * * Some IOCTL commands which do not make sense when used with devices, but + * whose implementations are safe and return the right error codes + * (``FS_IOC_FIEMAP``, ``FICLONE``, ``FICLONERANGE``, ``FIDEDUPERANGE``) + * + * This access right is available since the fifth version of the Landlock + * ABI. + * * .. warning:: * * It is currently not possible to restrict some file-related actions * accessible through these syscall families: :manpage:`chdir(2)`, * :manpage:`stat(2)`, :manpage:`flock(2)`, :manpage:`chmod(2)`, * :manpage:`chown(2)`, :manpage:`setxattr(2)`, :manpage:`utime(2)`, - * :manpage:`ioctl(2)`, :manpage:`fcntl(2)`, :manpage:`access(2)`. + * :manpage:`fcntl(2)`, :manpage:`access(2)`. * Future Landlock evolutions will enable to restrict them. */ /* clang-format off */ @@ -223,6 +252,7 @@ struct landlock_net_port_attr { #define LANDLOCK_ACCESS_FS_MAKE_SYM (1ULL << 12) #define LANDLOCK_ACCESS_FS_REFER (1ULL << 13) #define LANDLOCK_ACCESS_FS_TRUNCATE (1ULL << 14) +#define LANDLOCK_ACCESS_FS_IOCTL_DEV (1ULL << 15) /* clang-format on */ /** @@ -234,7 +264,7 @@ struct landlock_net_port_attr { * These flags enable to restrict a sandboxed process to a set of network * actions. This is supported since the Landlock ABI version 4. * - * TCP sockets with allowed actions: + * The following access rights apply to TCP port numbers: * * - %LANDLOCK_ACCESS_NET_BIND_TCP: Bind a TCP socket to a local port. * - %LANDLOCK_ACCESS_NET_CONNECT_TCP: Connect an active TCP socket to diff --git a/include/uapi/linux/magic.h b/include/uapi/linux/magic.h index 1b40a968ba91..bb575f3ab45e 100644 --- a/include/uapi/linux/magic.h +++ b/include/uapi/linux/magic.h @@ -37,6 +37,7 @@ #define HOSTFS_SUPER_MAGIC 0x00c0ffee #define OVERLAYFS_SUPER_MAGIC 0x794c7630 #define FUSE_SUPER_MAGIC 0x65735546 +#define BCACHEFS_SUPER_MAGIC 0xca451a4e #define MINIX_SUPER_MAGIC 0x137F /* minix v1 fs, 14 char names */ #define MINIX_SUPER_MAGIC2 0x138F /* minix v1 fs, 30 char names */ diff --git a/include/uapi/linux/media-bus-format.h b/include/uapi/linux/media-bus-format.h index f05f747e444d..d4c1d991014b 100644 --- a/include/uapi/linux/media-bus-format.h +++ b/include/uapi/linux/media-bus-format.h @@ -174,4 +174,13 @@ */ #define MEDIA_BUS_FMT_METADATA_FIXED 0x7001 +/* Generic line based metadata formats for serial buses. Next is 0x8008. */ +#define MEDIA_BUS_FMT_META_8 0x8001 +#define MEDIA_BUS_FMT_META_10 0x8002 +#define MEDIA_BUS_FMT_META_12 0x8003 +#define MEDIA_BUS_FMT_META_14 0x8004 +#define MEDIA_BUS_FMT_META_16 0x8005 +#define MEDIA_BUS_FMT_META_20 0x8006 +#define MEDIA_BUS_FMT_META_24 0x8007 + #endif /* __LINUX_MEDIA_BUS_FORMAT_H */ diff --git a/include/uapi/linux/media/raspberrypi/pisp_be_config.h b/include/uapi/linux/media/raspberrypi/pisp_be_config.h new file mode 100644 index 000000000000..cbeb714f4d61 --- /dev/null +++ b/include/uapi/linux/media/raspberrypi/pisp_be_config.h @@ -0,0 +1,968 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +/* + * PiSP Back End configuration definitions. + * + * Copyright (C) 2021 - Raspberry Pi Ltd + * + */ +#ifndef _UAPI_PISP_BE_CONFIG_H_ +#define _UAPI_PISP_BE_CONFIG_H_ + +#include <linux/types.h> + +#include "pisp_common.h" + +/* byte alignment for inputs */ +#define PISP_BACK_END_INPUT_ALIGN 4u +/* alignment for compressed inputs */ +#define PISP_BACK_END_COMPRESSED_ALIGN 8u +/* minimum required byte alignment for outputs */ +#define PISP_BACK_END_OUTPUT_MIN_ALIGN 16u +/* preferred byte alignment for outputs */ +#define PISP_BACK_END_OUTPUT_MAX_ALIGN 64u + +/* minimum allowed tile width anywhere in the pipeline */ +#define PISP_BACK_END_MIN_TILE_WIDTH 16u +/* minimum allowed tile width anywhere in the pipeline */ +#define PISP_BACK_END_MIN_TILE_HEIGHT 16u + +#define PISP_BACK_END_NUM_OUTPUTS 2 +#define PISP_BACK_END_HOG_OUTPUT 1 + +#define PISP_BACK_END_NUM_TILES 64 + +enum pisp_be_bayer_enable { + PISP_BE_BAYER_ENABLE_INPUT = 0x000001, + PISP_BE_BAYER_ENABLE_DECOMPRESS = 0x000002, + PISP_BE_BAYER_ENABLE_DPC = 0x000004, + PISP_BE_BAYER_ENABLE_GEQ = 0x000008, + PISP_BE_BAYER_ENABLE_TDN_INPUT = 0x000010, + PISP_BE_BAYER_ENABLE_TDN_DECOMPRESS = 0x000020, + PISP_BE_BAYER_ENABLE_TDN = 0x000040, + PISP_BE_BAYER_ENABLE_TDN_COMPRESS = 0x000080, + PISP_BE_BAYER_ENABLE_TDN_OUTPUT = 0x000100, + PISP_BE_BAYER_ENABLE_SDN = 0x000200, + PISP_BE_BAYER_ENABLE_BLC = 0x000400, + PISP_BE_BAYER_ENABLE_STITCH_INPUT = 0x000800, + PISP_BE_BAYER_ENABLE_STITCH_DECOMPRESS = 0x001000, + PISP_BE_BAYER_ENABLE_STITCH = 0x002000, + PISP_BE_BAYER_ENABLE_STITCH_COMPRESS = 0x004000, + PISP_BE_BAYER_ENABLE_STITCH_OUTPUT = 0x008000, + PISP_BE_BAYER_ENABLE_WBG = 0x010000, + PISP_BE_BAYER_ENABLE_CDN = 0x020000, + PISP_BE_BAYER_ENABLE_LSC = 0x040000, + PISP_BE_BAYER_ENABLE_TONEMAP = 0x080000, + PISP_BE_BAYER_ENABLE_CAC = 0x100000, + PISP_BE_BAYER_ENABLE_DEBIN = 0x200000, + PISP_BE_BAYER_ENABLE_DEMOSAIC = 0x400000, +}; + +enum pisp_be_rgb_enable { + PISP_BE_RGB_ENABLE_INPUT = 0x000001, + PISP_BE_RGB_ENABLE_CCM = 0x000002, + PISP_BE_RGB_ENABLE_SAT_CONTROL = 0x000004, + PISP_BE_RGB_ENABLE_YCBCR = 0x000008, + PISP_BE_RGB_ENABLE_FALSE_COLOUR = 0x000010, + PISP_BE_RGB_ENABLE_SHARPEN = 0x000020, + /* Preferred colours would occupy 0x000040 */ + PISP_BE_RGB_ENABLE_YCBCR_INVERSE = 0x000080, + PISP_BE_RGB_ENABLE_GAMMA = 0x000100, + PISP_BE_RGB_ENABLE_CSC0 = 0x000200, + PISP_BE_RGB_ENABLE_CSC1 = 0x000400, + PISP_BE_RGB_ENABLE_DOWNSCALE0 = 0x001000, + PISP_BE_RGB_ENABLE_DOWNSCALE1 = 0x002000, + PISP_BE_RGB_ENABLE_RESAMPLE0 = 0x008000, + PISP_BE_RGB_ENABLE_RESAMPLE1 = 0x010000, + PISP_BE_RGB_ENABLE_OUTPUT0 = 0x040000, + PISP_BE_RGB_ENABLE_OUTPUT1 = 0x080000, + PISP_BE_RGB_ENABLE_HOG = 0x200000 +}; + +#define PISP_BE_RGB_ENABLE_CSC(i) (PISP_BE_RGB_ENABLE_CSC0 << (i)) +#define PISP_BE_RGB_ENABLE_DOWNSCALE(i) (PISP_BE_RGB_ENABLE_DOWNSCALE0 << (i)) +#define PISP_BE_RGB_ENABLE_RESAMPLE(i) (PISP_BE_RGB_ENABLE_RESAMPLE0 << (i)) +#define PISP_BE_RGB_ENABLE_OUTPUT(i) (PISP_BE_RGB_ENABLE_OUTPUT0 << (i)) + +/* + * We use the enable flags to show when blocks are "dirty", but we need some + * extra ones too. + */ +enum pisp_be_dirty { + PISP_BE_DIRTY_GLOBAL = 0x0001, + PISP_BE_DIRTY_SH_FC_COMBINE = 0x0002, + PISP_BE_DIRTY_CROP = 0x0004 +}; + +/** + * struct pisp_be_global_config - PiSP global enable bitmaps + * @bayer_enables: Bayer input enable flags + * @rgb_enables: RGB output enable flags + * @bayer_order: Bayer input format ordering + * @pad: Padding bytes + */ +struct pisp_be_global_config { + __u32 bayer_enables; + __u32 rgb_enables; + __u8 bayer_order; + __u8 pad[3]; +} __attribute__((packed)); + +/** + * struct pisp_be_input_buffer_config - PiSP Back End input buffer + * @addr: Input buffer address + */ +struct pisp_be_input_buffer_config { + /* low 32 bits followed by high 32 bits (for each of up to 3 planes) */ + __u32 addr[3][2]; +} __attribute__((packed)); + +/** + * struct pisp_be_dpc_config - PiSP Back End DPC config + * + * Defective Pixel Correction configuration + * + * @coeff_level: Coefficient for the darkest neighbouring pixel value + * @coeff_range: Coefficient for the range of pixels for this Bayer channel + * @pad: Padding byte + * @flags: DPC configuration flags + */ +struct pisp_be_dpc_config { + __u8 coeff_level; + __u8 coeff_range; + __u8 pad; +#define PISP_BE_DPC_FLAG_FOLDBACK 1 + __u8 flags; +} __attribute__((packed)); + +/** + * struct pisp_be_geq_config - PiSP Back End GEQ config + * + * Green Equalisation configuration + * + * @offset: Offset value for threshold calculation + * @slope_sharper: Slope/Sharper configuration + * @min: Minimum value the threshold may have + * @max: Maximum value the threshold may have + */ +struct pisp_be_geq_config { + __u16 offset; +#define PISP_BE_GEQ_SHARPER (1U << 15) +#define PISP_BE_GEQ_SLOPE ((1 << 10) - 1) + /* top bit is the "sharper" flag, slope value is bottom 10 bits */ + __u16 slope_sharper; + __u16 min; + __u16 max; +} __attribute__((packed)); + +/** + * struct pisp_be_tdn_input_buffer_config - PiSP Back End TDN input buffer + * @addr: TDN input buffer address + */ +struct pisp_be_tdn_input_buffer_config { + /* low 32 bits followed by high 32 bits */ + __u32 addr[2]; +} __attribute__((packed)); + +/** + * struct pisp_be_tdn_config - PiSP Back End TDN config + * + * Temporal Denoise configuration + * + * @black_level: Black level value subtracted from pixels + * @ratio: Multiplier for the LTA input frame + * @noise_constant: Constant offset value used in noise estimation + * @noise_slope: Noise estimation multiplier + * @threshold: Threshold for TDN operations + * @reset: Disable TDN operations + * @pad: Padding byte + */ +struct pisp_be_tdn_config { + __u16 black_level; + __u16 ratio; + __u16 noise_constant; + __u16 noise_slope; + __u16 threshold; + __u8 reset; + __u8 pad; +} __attribute__((packed)); + +/** + * struct pisp_be_tdn_output_buffer_config - PiSP Back End TDN output buffer + * @addr: TDN output buffer address + */ +struct pisp_be_tdn_output_buffer_config { + /* low 32 bits followed by high 32 bits */ + __u32 addr[2]; +} __attribute__((packed)); + +/** + * struct pisp_be_sdn_config - PiSP Back End SDN config + * + * Spatial Denoise configuration + * + * @black_level: Black level subtracted from pixel for noise estimation + * @leakage: Proportion of the original undenoised value to mix in + * denoised output + * @pad: Padding byte + * @noise_constant: Noise constant used for noise estimation + * @noise_slope: Noise slope value used for noise estimation + * @noise_constant2: Second noise constant used for noise estimation + * @noise_slope2: Second slope value used for noise estimation + */ +struct pisp_be_sdn_config { + __u16 black_level; + __u8 leakage; + __u8 pad; + __u16 noise_constant; + __u16 noise_slope; + __u16 noise_constant2; + __u16 noise_slope2; +} __attribute__((packed)); + +/** + * struct pisp_be_stitch_input_buffer_config - PiSP Back End Stitch input + * @addr: Stitch input buffer address + */ +struct pisp_be_stitch_input_buffer_config { + /* low 32 bits followed by high 32 bits */ + __u32 addr[2]; +} __attribute__((packed)); + +#define PISP_BE_STITCH_STREAMING_LONG 0x8000 +#define PISP_BE_STITCH_EXPOSURE_RATIO_MASK 0x7fff + +/** + * struct pisp_be_stitch_config - PiSP Back End Stitch config + * + * Stitch block configuration + * + * @threshold_lo: Low threshold value + * @threshold_diff_power: Low and high threshold difference + * @pad: Padding bytes + * @exposure_ratio: Multiplier to convert long exposure pixels into + * short exposure pixels + * @motion_threshold_256: Motion threshold above which short exposure + * pixels are used + * @motion_threshold_recip: Reciprocal of motion_threshold_256 value + */ +struct pisp_be_stitch_config { + __u16 threshold_lo; + __u8 threshold_diff_power; + __u8 pad; + + /* top bit indicates whether streaming input is the long exposure */ + __u16 exposure_ratio; + + __u8 motion_threshold_256; + __u8 motion_threshold_recip; +} __attribute__((packed)); + +/** + * struct pisp_be_stitch_output_buffer_config - PiSP Back End Stitch output + * @addr: Stitch input buffer address + */ +struct pisp_be_stitch_output_buffer_config { + /* low 32 bits followed by high 32 bits */ + __u32 addr[2]; +} __attribute__((packed)); + +/** + * struct pisp_be_cdn_config - PiSP Back End CDN config + * + * Colour Denoise configuration + * + * @thresh: Constant for noise estimation + * @iir_strength: Relative strength of the IIR part of the filter + * @g_adjust: Proportion of the change assigned to the G channel + */ +struct pisp_be_cdn_config { + __u16 thresh; + __u8 iir_strength; + __u8 g_adjust; +} __attribute__((packed)); + +#define PISP_BE_LSC_LOG_GRID_SIZE 5 +#define PISP_BE_LSC_GRID_SIZE (1 << PISP_BE_LSC_LOG_GRID_SIZE) +#define PISP_BE_LSC_STEP_PRECISION 18 + +/** + * struct pisp_be_lsc_config - PiSP Back End LSC config + * + * Lens Shading Correction configuration + * + * @grid_step_x: Reciprocal of cell size width + * @grid_step_y: Reciprocal of cell size height + * @lut_packed: Jointly-coded RGB gains for each LSC grid + */ +struct pisp_be_lsc_config { + /* (1<<18) / grid_cell_width */ + __u16 grid_step_x; + /* (1<<18) / grid_cell_height */ + __u16 grid_step_y; + /* RGB gains jointly encoded in 32 bits */ +#define PISP_BE_LSC_LUT_SIZE (PISP_BE_LSC_GRID_SIZE + 1) + __u32 lut_packed[PISP_BE_LSC_LUT_SIZE][PISP_BE_LSC_LUT_SIZE]; +} __attribute__((packed)); + +/** + * struct pisp_be_lsc_extra - PiSP Back End LSC Extra config + * @offset_x: Horizontal offset into the LSC table of this tile + * @offset_y: Vertical offset into the LSC table of this tile + */ +struct pisp_be_lsc_extra { + __u16 offset_x; + __u16 offset_y; +} __attribute__((packed)); + +#define PISP_BE_CAC_LOG_GRID_SIZE 3 +#define PISP_BE_CAC_GRID_SIZE (1 << PISP_BE_CAC_LOG_GRID_SIZE) +#define PISP_BE_CAC_STEP_PRECISION 20 + +/** + * struct pisp_be_cac_config - PiSP Back End CAC config + * + * Chromatic Aberration Correction config + * + * @grid_step_x: Reciprocal of cell size width + * @grid_step_y: Reciprocal of cell size height + * @lut: Pixel shift for the CAC grid + */ +struct pisp_be_cac_config { + /* (1<<20) / grid_cell_width */ + __u16 grid_step_x; + /* (1<<20) / grid_cell_height */ + __u16 grid_step_y; + /* [gridy][gridx][rb][xy] */ +#define PISP_BE_CAC_LUT_SIZE (PISP_BE_CAC_GRID_SIZE + 1) + __s8 lut[PISP_BE_CAC_LUT_SIZE][PISP_BE_CAC_LUT_SIZE][2][2]; +} __attribute__((packed)); + +/** + * struct pisp_be_cac_extra - PiSP Back End CAC extra config + * @offset_x: Horizontal offset into the CAC table of this tile + * @offset_y: Horizontal offset into the CAC table of this tile + */ +struct pisp_be_cac_extra { + __u16 offset_x; + __u16 offset_y; +} __attribute__((packed)); + +#define PISP_BE_DEBIN_NUM_COEFFS 4 + +/** + * struct pisp_be_debin_config - PiSP Back End Debin config + * + * Debinning configuration + * + * @coeffs: Filter coefficients for debinning + * @h_enable: Horizontal debinning enable + * @v_enable: Vertical debinning enable + * @pad: Padding bytes + */ +struct pisp_be_debin_config { + __s8 coeffs[PISP_BE_DEBIN_NUM_COEFFS]; + __s8 h_enable; + __s8 v_enable; + __s8 pad[2]; +} __attribute__((packed)); + +#define PISP_BE_TONEMAP_LUT_SIZE 64 + +/** + * struct pisp_be_tonemap_config - PiSP Back End Tonemap config + * + * Tonemapping configuration + * + * @detail_constant: Constant value for threshold calculation + * @detail_slope: Slope value for threshold calculation + * @iir_strength: Relative strength of the IIR fiter + * @strength: Strength factor + * @lut: Look-up table for tonemap curve + */ +struct pisp_be_tonemap_config { + __u16 detail_constant; + __u16 detail_slope; + __u16 iir_strength; + __u16 strength; + __u32 lut[PISP_BE_TONEMAP_LUT_SIZE]; +} __attribute__((packed)); + +/** + * struct pisp_be_demosaic_config - PiSP Back End Demosaic config + * + * Demosaic configuration + * + * @sharper: Use other Bayer channels to increase sharpness + * @fc_mode: Built-in false colour suppression mode + * @pad: Padding bytes + */ +struct pisp_be_demosaic_config { + __u8 sharper; + __u8 fc_mode; + __u8 pad[2]; +} __attribute__((packed)); + +/** + * struct pisp_be_ccm_config - PiSP Back End CCM config + * + * Colour Correction Matrix configuration + * + * @coeffs: Matrix coefficients + * @pad: Padding bytes + * @offsets: Offsets triplet + */ +struct pisp_be_ccm_config { + __s16 coeffs[9]; + __u8 pad[2]; + __s32 offsets[3]; +} __attribute__((packed)); + +/** + * struct pisp_be_sat_control_config - PiSP Back End SAT config + * + * Saturation Control configuration + * + * @shift_r: Left shift for Red colour channel + * @shift_g: Left shift for Green colour channel + * @shift_b: Left shift for Blue colour channel + * @pad: Padding byte + */ +struct pisp_be_sat_control_config { + __u8 shift_r; + __u8 shift_g; + __u8 shift_b; + __u8 pad; +} __attribute__((packed)); + +/** + * struct pisp_be_false_colour_config - PiSP Back End False Colour config + * + * False Colour configuration + * + * @distance: Distance of neighbouring pixels, either 1 or 2 + * @pad: Padding bytes + */ +struct pisp_be_false_colour_config { + __u8 distance; + __u8 pad[3]; +} __attribute__((packed)); + +#define PISP_BE_SHARPEN_SIZE 5 +#define PISP_BE_SHARPEN_FUNC_NUM_POINTS 9 + +/** + * struct pisp_be_sharpen_config - PiSP Back End Sharpening config + * + * Sharpening configuration + * + * @kernel0: Coefficient for filter 0 + * @pad0: Padding byte + * @kernel1: Coefficient for filter 1 + * @pad1: Padding byte + * @kernel2: Coefficient for filter 2 + * @pad2: Padding byte + * @kernel3: Coefficient for filter 3 + * @pad3: Padding byte + * @kernel4: Coefficient for filter 4 + * @pad4: Padding byte + * @threshold_offset0: Offset for filter 0 response calculation + * @threshold_slope0: Slope multiplier for the filter 0 response calculation + * @scale0: Scale factor for filter 0 response calculation + * @pad5: Padding byte + * @threshold_offset1: Offset for filter 0 response calculation + * @threshold_slope1: Slope multiplier for the filter 0 response calculation + * @scale1: Scale factor for filter 0 response calculation + * @pad6: Padding byte + * @threshold_offset2: Offset for filter 0 response calculation + * @threshold_slope2: Slope multiplier for the filter 0 response calculation + * @scale2: Scale factor for filter 0 response calculation + * @pad7: Padding byte + * @threshold_offset3: Offset for filter 0 response calculation + * @threshold_slope3: Slope multiplier for the filter 0 response calculation + * @scale3: Scale factor for filter 0 response calculation + * @pad8: Padding byte + * @threshold_offset4: Offset for filter 0 response calculation + * @threshold_slope4: Slope multiplier for the filter 0 response calculation + * @scale4: Scale factor for filter 0 response calculation + * @pad9: Padding byte + * @positive_strength: Factor to scale the positive sharpening strength + * @positive_pre_limit: Maximum allowed possible positive sharpening value + * @positive_func: Gain factor applied to positive sharpening response + * @positive_limit: Final gain factor applied to positive sharpening + * @negative_strength: Factor to scale the negative sharpening strength + * @negative_pre_limit: Maximum allowed possible negative sharpening value + * @negative_func: Gain factor applied to negative sharpening response + * @negative_limit: Final gain factor applied to negative sharpening + * @enables: Filter enable mask + * @white: White output pixel filter mask + * @black: Black output pixel filter mask + * @grey: Grey output pixel filter mask + */ +struct pisp_be_sharpen_config { + __s8 kernel0[PISP_BE_SHARPEN_SIZE * PISP_BE_SHARPEN_SIZE]; + __s8 pad0[3]; + __s8 kernel1[PISP_BE_SHARPEN_SIZE * PISP_BE_SHARPEN_SIZE]; + __s8 pad1[3]; + __s8 kernel2[PISP_BE_SHARPEN_SIZE * PISP_BE_SHARPEN_SIZE]; + __s8 pad2[3]; + __s8 kernel3[PISP_BE_SHARPEN_SIZE * PISP_BE_SHARPEN_SIZE]; + __s8 pad3[3]; + __s8 kernel4[PISP_BE_SHARPEN_SIZE * PISP_BE_SHARPEN_SIZE]; + __s8 pad4[3]; + __u16 threshold_offset0; + __u16 threshold_slope0; + __u16 scale0; + __u16 pad5; + __u16 threshold_offset1; + __u16 threshold_slope1; + __u16 scale1; + __u16 pad6; + __u16 threshold_offset2; + __u16 threshold_slope2; + __u16 scale2; + __u16 pad7; + __u16 threshold_offset3; + __u16 threshold_slope3; + __u16 scale3; + __u16 pad8; + __u16 threshold_offset4; + __u16 threshold_slope4; + __u16 scale4; + __u16 pad9; + __u16 positive_strength; + __u16 positive_pre_limit; + __u16 positive_func[PISP_BE_SHARPEN_FUNC_NUM_POINTS]; + __u16 positive_limit; + __u16 negative_strength; + __u16 negative_pre_limit; + __u16 negative_func[PISP_BE_SHARPEN_FUNC_NUM_POINTS]; + __u16 negative_limit; + __u8 enables; + __u8 white; + __u8 black; + __u8 grey; +} __attribute__((packed)); + +/** + * struct pisp_be_sh_fc_combine_config - PiSP Back End Sharpening and + * False Colour config + * + * Sharpening and False Colour configuration + * + * @y_factor: Control amount of desaturation of pixels being darkened + * @c1_factor: Control amount of brightening of a pixel for the Cb + * channel + * @c2_factor: Control amount of brightening of a pixel for the Cr + * channel + * @pad: Padding byte + */ +struct pisp_be_sh_fc_combine_config { + __u8 y_factor; + __u8 c1_factor; + __u8 c2_factor; + __u8 pad; +} __attribute__((packed)); + +#define PISP_BE_GAMMA_LUT_SIZE 64 + +/** + * struct pisp_be_gamma_config - PiSP Back End Gamma configuration + * @lut: Gamma curve look-up table + */ +struct pisp_be_gamma_config { + __u32 lut[PISP_BE_GAMMA_LUT_SIZE]; +} __attribute__((packed)); + +/** + * struct pisp_be_crop_config - PiSP Back End Crop config + * + * Crop configuration + * + * @offset_x: Number of pixels cropped from the left of the tile + * @offset_y: Number of pixels cropped from the top of the tile + * @width: Width of the cropped tile output + * @height: Height of the cropped tile output + */ +struct pisp_be_crop_config { + __u16 offset_x, offset_y; + __u16 width, height; +} __attribute__((packed)); + +#define PISP_BE_RESAMPLE_FILTER_SIZE 96 + +/** + * struct pisp_be_resample_config - PiSP Back End Resampling config + * + * Resample configuration + * + * @scale_factor_h: Horizontal scale factor + * @scale_factor_v: Vertical scale factor + * @coef: Resample coefficients + */ +struct pisp_be_resample_config { + __u16 scale_factor_h, scale_factor_v; + __s16 coef[PISP_BE_RESAMPLE_FILTER_SIZE]; +} __attribute__((packed)); + +/** + * struct pisp_be_resample_extra - PiSP Back End Resample config + * + * Resample configuration + * + * @scaled_width: Width in pixels of the scaled output + * @scaled_height: Height in pixels of the scaled output + * @initial_phase_h: Initial horizontal phase + * @initial_phase_v: Initial vertical phase + */ +struct pisp_be_resample_extra { + __u16 scaled_width; + __u16 scaled_height; + __s16 initial_phase_h[3]; + __s16 initial_phase_v[3]; +} __attribute__((packed)); + +/** + * struct pisp_be_downscale_config - PiSP Back End Downscale config + * + * Downscale configuration + * + * @scale_factor_h: Horizontal scale factor + * @scale_factor_v: Vertical scale factor + * @scale_recip_h: Horizontal reciprocal factor + * @scale_recip_v: Vertical reciprocal factor + */ +struct pisp_be_downscale_config { + __u16 scale_factor_h; + __u16 scale_factor_v; + __u16 scale_recip_h; + __u16 scale_recip_v; +} __attribute__((packed)); + +/** + * struct pisp_be_downscale_extra - PiSP Back End Downscale Extra config + * @scaled_width: Scaled image width + * @scaled_height: Scaled image height + */ +struct pisp_be_downscale_extra { + __u16 scaled_width; + __u16 scaled_height; +} __attribute__((packed)); + +/** + * struct pisp_be_hog_config - PiSP Back End HOG config + * + * Histogram of Oriented Gradients configuration + * + * @compute_signed: Set 0 for unsigned gradients, 1 for signed + * @channel_mix: Channels proportions to use + * @stride: Stride in bytes between blocks directly below + */ +struct pisp_be_hog_config { + __u8 compute_signed; + __u8 channel_mix[3]; + __u32 stride; +} __attribute__((packed)); + +struct pisp_be_axi_config { + __u8 r_qos; /* Read QoS */ + __u8 r_cache_prot; /* Read { prot[2:0], cache[3:0] } */ + __u8 w_qos; /* Write QoS */ + __u8 w_cache_prot; /* Write { prot[2:0], cache[3:0] } */ +} __attribute__((packed)); + +/** + * enum pisp_be_transform - PiSP Back End Transform flags + * @PISP_BE_TRANSFORM_NONE: No transform + * @PISP_BE_TRANSFORM_HFLIP: Horizontal flip + * @PISP_BE_TRANSFORM_VFLIP: Vertical flip + * @PISP_BE_TRANSFORM_ROT180: 180 degress rotation + */ +enum pisp_be_transform { + PISP_BE_TRANSFORM_NONE = 0x0, + PISP_BE_TRANSFORM_HFLIP = 0x1, + PISP_BE_TRANSFORM_VFLIP = 0x2, + PISP_BE_TRANSFORM_ROT180 = + (PISP_BE_TRANSFORM_HFLIP | PISP_BE_TRANSFORM_VFLIP) +}; + +struct pisp_be_output_format_config { + struct pisp_image_format_config image; + __u8 transform; + __u8 pad[3]; + __u16 lo; + __u16 hi; + __u16 lo2; + __u16 hi2; +} __attribute__((packed)); + +/** + * struct pisp_be_output_buffer_config - PiSP Back End Output buffer + * @addr: Output buffer address + */ +struct pisp_be_output_buffer_config { + /* low 32 bits followed by high 32 bits (for each of 3 planes) */ + __u32 addr[3][2]; +} __attribute__((packed)); + +/** + * struct pisp_be_hog_buffer_config - PiSP Back End HOG buffer + * @addr: HOG buffer address + */ +struct pisp_be_hog_buffer_config { + /* low 32 bits followed by high 32 bits */ + __u32 addr[2]; +} __attribute__((packed)); + +/** + * struct pisp_be_config - RaspberryPi PiSP Back End Processing configuration + * + * @input_buffer: Input buffer addresses + * @tdn_input_buffer: TDN input buffer addresses + * @stitch_input_buffer: Stitch input buffer addresses + * @tdn_output_buffer: TDN output buffer addresses + * @stitch_output_buffer: Stitch output buffer addresses + * @output_buffer: Output buffers addresses + * @hog_buffer: HOG buffer addresses + * @global: Global PiSP configuration + * @input_format: Input image format + * @decompress: Decompress configuration + * @dpc: Defective Pixel Correction configuration + * @geq: Green Equalisation configuration + * @tdn_input_format: Temporal Denoise input format + * @tdn_decompress: Temporal Denoise decompress configuration + * @tdn: Temporal Denoise configuration + * @tdn_compress: Temporal Denoise compress configuration + * @tdn_output_format: Temporal Denoise output format + * @sdn: Spatial Denoise configuration + * @blc: Black Level Correction configuration + * @stitch_compress: Stitch compress configuration + * @stitch_output_format: Stitch output format + * @stitch_input_format: Stitch input format + * @stitch_decompress: Stitch decompress configuration + * @stitch: Stitch configuration + * @lsc: Lens Shading Correction configuration + * @wbg: White Balance Gain configuration + * @cdn: Colour Denoise configuration + * @cac: Colour Aberration Correction configuration + * @debin: Debinning configuration + * @tonemap: Tonemapping configuration + * @demosaic: Demosaicing configuration + * @ccm: Colour Correction Matrix configuration + * @sat_control: Saturation Control configuration + * @ycbcr: YCbCr colour correction configuration + * @sharpen: Sharpening configuration + * @false_colour: False colour correction + * @sh_fc_combine: Sharpening and False Colour correction + * @ycbcr_inverse: Inverse YCbCr colour correction + * @gamma: Gamma curve configuration + * @csc: Color Space Conversion configuration + * @downscale: Downscale configuration + * @resample: Resampling configuration + * @output_format: Output format configuration + * @hog: HOG configuration + * @axi: AXI bus configuration + * @lsc_extra: LSC extra info + * @cac_extra: CAC extra info + * @downscale_extra: Downscaler extra info + * @resample_extra: Resample extra info + * @crop: Crop configuration + * @hog_format: HOG format info + * @dirty_flags_bayer: Bayer enable dirty flags + * (:c:type:`pisp_be_bayer_enable`) + * @dirty_flags_rgb: RGB enable dirty flags + * (:c:type:`pisp_be_rgb_enable`) + * @dirty_flags_extra: Extra dirty flags + */ +struct pisp_be_config { + /* I/O configuration: */ + struct pisp_be_input_buffer_config input_buffer; + struct pisp_be_tdn_input_buffer_config tdn_input_buffer; + struct pisp_be_stitch_input_buffer_config stitch_input_buffer; + struct pisp_be_tdn_output_buffer_config tdn_output_buffer; + struct pisp_be_stitch_output_buffer_config stitch_output_buffer; + struct pisp_be_output_buffer_config + output_buffer[PISP_BACK_END_NUM_OUTPUTS]; + struct pisp_be_hog_buffer_config hog_buffer; + /* Processing configuration: */ + struct pisp_be_global_config global; + struct pisp_image_format_config input_format; + struct pisp_decompress_config decompress; + struct pisp_be_dpc_config dpc; + struct pisp_be_geq_config geq; + struct pisp_image_format_config tdn_input_format; + struct pisp_decompress_config tdn_decompress; + struct pisp_be_tdn_config tdn; + struct pisp_compress_config tdn_compress; + struct pisp_image_format_config tdn_output_format; + struct pisp_be_sdn_config sdn; + struct pisp_bla_config blc; + struct pisp_compress_config stitch_compress; + struct pisp_image_format_config stitch_output_format; + struct pisp_image_format_config stitch_input_format; + struct pisp_decompress_config stitch_decompress; + struct pisp_be_stitch_config stitch; + struct pisp_be_lsc_config lsc; + struct pisp_wbg_config wbg; + struct pisp_be_cdn_config cdn; + struct pisp_be_cac_config cac; + struct pisp_be_debin_config debin; + struct pisp_be_tonemap_config tonemap; + struct pisp_be_demosaic_config demosaic; + struct pisp_be_ccm_config ccm; + struct pisp_be_sat_control_config sat_control; + struct pisp_be_ccm_config ycbcr; + struct pisp_be_sharpen_config sharpen; + struct pisp_be_false_colour_config false_colour; + struct pisp_be_sh_fc_combine_config sh_fc_combine; + struct pisp_be_ccm_config ycbcr_inverse; + struct pisp_be_gamma_config gamma; + struct pisp_be_ccm_config csc[PISP_BACK_END_NUM_OUTPUTS]; + struct pisp_be_downscale_config downscale[PISP_BACK_END_NUM_OUTPUTS]; + struct pisp_be_resample_config resample[PISP_BACK_END_NUM_OUTPUTS]; + struct pisp_be_output_format_config + output_format[PISP_BACK_END_NUM_OUTPUTS]; + struct pisp_be_hog_config hog; + struct pisp_be_axi_config axi; + /* Non-register fields: */ + struct pisp_be_lsc_extra lsc_extra; + struct pisp_be_cac_extra cac_extra; + struct pisp_be_downscale_extra + downscale_extra[PISP_BACK_END_NUM_OUTPUTS]; + struct pisp_be_resample_extra resample_extra[PISP_BACK_END_NUM_OUTPUTS]; + struct pisp_be_crop_config crop; + struct pisp_image_format_config hog_format; + __u32 dirty_flags_bayer; /* these use pisp_be_bayer_enable */ + __u32 dirty_flags_rgb; /* use pisp_be_rgb_enable */ + __u32 dirty_flags_extra; /* these use pisp_be_dirty_t */ +} __attribute__((packed)); + +/** + * enum pisp_tile_edge - PiSP Back End Tile position + * @PISP_LEFT_EDGE: Left edge tile + * @PISP_RIGHT_EDGE: Right edge tile + * @PISP_TOP_EDGE: Top edge tile + * @PISP_BOTTOM_EDGE: Bottom edge tile + */ +enum pisp_tile_edge { + PISP_LEFT_EDGE = (1 << 0), + PISP_RIGHT_EDGE = (1 << 1), + PISP_TOP_EDGE = (1 << 2), + PISP_BOTTOM_EDGE = (1 << 3) +}; + +/** + * struct pisp_tile - Raspberry Pi PiSP Back End tile configuration + * + * Tile parameters: each set of tile parameters is a 160-bytes block of data + * which contains the tile processing parameters. + * + * @edge: Edge tile flag + * @pad0: Padding bytes + * @input_addr_offset: Top-left pixel offset, in bytes + * @input_addr_offset2: Top-left pixel offset, in bytes for the second/ + * third image planes + * @input_offset_x: Horizontal offset in pixels of this tile in the + * input image + * @input_offset_y: Vertical offset in pixels of this tile in the + * input image + * @input_width: Width in pixels of this tile + * @input_height: Height in pixels of the this tile + * @tdn_input_addr_offset: TDN input image offset, in bytes + * @tdn_output_addr_offset: TDN output image offset, in bytes + * @stitch_input_addr_offset: Stitch input image offset, in bytes + * @stitch_output_addr_offset: Stitch output image offset, in bytes + * @lsc_grid_offset_x: Horizontal offset in the LSC table for this tile + * @lsc_grid_offset_y: Vertical offset in the LSC table for this tile + * @cac_grid_offset_x: Horizontal offset in the CAC table for this tile + * @cac_grid_offset_y: Horizontal offset in the CAC table for this tile + * @crop_x_start: Number of pixels cropped from the left of the + * tile + * @crop_x_end: Number of pixels cropped from the right of the + * tile + * @crop_y_start: Number of pixels cropped from the top of the + * tile + * @crop_y_end: Number of pixels cropped from the bottom of the + * tile + * @downscale_phase_x: Initial horizontal phase in pixels + * @downscale_phase_y: Initial vertical phase in pixels + * @resample_in_width: Width in pixels of the tile entering the + * Resample block + * @resample_in_height: Height in pixels of the tile entering the + * Resample block + * @resample_phase_x: Initial horizontal phase for the Resample block + * @resample_phase_y: Initial vertical phase for the Resample block + * @output_offset_x: Horizontal offset in pixels where the tile will + * be written into the output image + * @output_offset_y: Vertical offset in pixels where the tile will be + * written into the output image + * @output_width: Width in pixels in the output image of this tile + * @output_height: Height in pixels in the output image of this tile + * @output_addr_offset: Offset in bytes into the output buffer + * @output_addr_offset2: Offset in bytes into the output buffer for the + * second and third plane + * @output_hog_addr_offset: Offset in bytes into the HOG buffer where + * results of this tile are to be written + */ +struct pisp_tile { + __u8 edge; /* enum pisp_tile_edge */ + __u8 pad0[3]; + /* 4 bytes */ + __u32 input_addr_offset; + __u32 input_addr_offset2; + __u16 input_offset_x; + __u16 input_offset_y; + __u16 input_width; + __u16 input_height; + /* 20 bytes */ + __u32 tdn_input_addr_offset; + __u32 tdn_output_addr_offset; + __u32 stitch_input_addr_offset; + __u32 stitch_output_addr_offset; + /* 36 bytes */ + __u32 lsc_grid_offset_x; + __u32 lsc_grid_offset_y; + /* 44 bytes */ + __u32 cac_grid_offset_x; + __u32 cac_grid_offset_y; + /* 52 bytes */ + __u16 crop_x_start[PISP_BACK_END_NUM_OUTPUTS]; + __u16 crop_x_end[PISP_BACK_END_NUM_OUTPUTS]; + __u16 crop_y_start[PISP_BACK_END_NUM_OUTPUTS]; + __u16 crop_y_end[PISP_BACK_END_NUM_OUTPUTS]; + /* 68 bytes */ + /* Ordering is planes then branches */ + __u16 downscale_phase_x[3 * PISP_BACK_END_NUM_OUTPUTS]; + __u16 downscale_phase_y[3 * PISP_BACK_END_NUM_OUTPUTS]; + /* 92 bytes */ + __u16 resample_in_width[PISP_BACK_END_NUM_OUTPUTS]; + __u16 resample_in_height[PISP_BACK_END_NUM_OUTPUTS]; + /* 100 bytes */ + /* Ordering is planes then branches */ + __u16 resample_phase_x[3 * PISP_BACK_END_NUM_OUTPUTS]; + __u16 resample_phase_y[3 * PISP_BACK_END_NUM_OUTPUTS]; + /* 124 bytes */ + __u16 output_offset_x[PISP_BACK_END_NUM_OUTPUTS]; + __u16 output_offset_y[PISP_BACK_END_NUM_OUTPUTS]; + __u16 output_width[PISP_BACK_END_NUM_OUTPUTS]; + __u16 output_height[PISP_BACK_END_NUM_OUTPUTS]; + /* 140 bytes */ + __u32 output_addr_offset[PISP_BACK_END_NUM_OUTPUTS]; + __u32 output_addr_offset2[PISP_BACK_END_NUM_OUTPUTS]; + /* 156 bytes */ + __u32 output_hog_addr_offset; + /* 160 bytes */ +} __attribute__((packed)); + +/** + * struct pisp_be_tiles_config - Raspberry Pi PiSP Back End configuration + * @tiles: Tile descriptors + * @num_tiles: Number of tiles + * @config: PiSP Back End configuration + */ +struct pisp_be_tiles_config { + struct pisp_be_config config; + struct pisp_tile tiles[PISP_BACK_END_NUM_TILES]; + __u32 num_tiles; +} __attribute__((packed)); + +#endif /* _UAPI_PISP_BE_CONFIG_H_ */ diff --git a/include/uapi/linux/media/raspberrypi/pisp_common.h b/include/uapi/linux/media/raspberrypi/pisp_common.h new file mode 100644 index 000000000000..cbdccfed1261 --- /dev/null +++ b/include/uapi/linux/media/raspberrypi/pisp_common.h @@ -0,0 +1,202 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +/* + * RP1 PiSP common definitions. + * + * Copyright (C) 2021 - Raspberry Pi Ltd. + * + */ +#ifndef _UAPI_PISP_COMMON_H_ +#define _UAPI_PISP_COMMON_H_ + +#include <linux/types.h> + +struct pisp_image_format_config { + /* size in pixels */ + __u16 width; + __u16 height; + /* must match struct pisp_image_format below */ + __u32 format; + __s32 stride; + /* some planar image formats will need a second stride */ + __s32 stride2; +} __attribute__((packed)); + +enum pisp_bayer_order { + /* + * Note how bayer_order&1 tells you if G is on the even pixels of the + * checkerboard or not, and bayer_order&2 tells you if R is on the even + * rows or is swapped with B. Note that if the top (of the 8) bits is + * set, this denotes a monochrome or greyscale image, and the lower bits + * should all be ignored. + */ + PISP_BAYER_ORDER_RGGB = 0, + PISP_BAYER_ORDER_GBRG = 1, + PISP_BAYER_ORDER_BGGR = 2, + PISP_BAYER_ORDER_GRBG = 3, + PISP_BAYER_ORDER_GREYSCALE = 128 +}; + +enum pisp_image_format { + /* + * Precise values are mostly tbd. Generally these will be portmanteau + * values comprising bit fields and flags. This format must be shared + * throughout the PiSP. + */ + PISP_IMAGE_FORMAT_BPS_8 = 0x00000000, + PISP_IMAGE_FORMAT_BPS_10 = 0x00000001, + PISP_IMAGE_FORMAT_BPS_12 = 0x00000002, + PISP_IMAGE_FORMAT_BPS_16 = 0x00000003, + PISP_IMAGE_FORMAT_BPS_MASK = 0x00000003, + + PISP_IMAGE_FORMAT_PLANARITY_INTERLEAVED = 0x00000000, + PISP_IMAGE_FORMAT_PLANARITY_SEMI_PLANAR = 0x00000010, + PISP_IMAGE_FORMAT_PLANARITY_PLANAR = 0x00000020, + PISP_IMAGE_FORMAT_PLANARITY_MASK = 0x00000030, + + PISP_IMAGE_FORMAT_SAMPLING_444 = 0x00000000, + PISP_IMAGE_FORMAT_SAMPLING_422 = 0x00000100, + PISP_IMAGE_FORMAT_SAMPLING_420 = 0x00000200, + PISP_IMAGE_FORMAT_SAMPLING_MASK = 0x00000300, + + PISP_IMAGE_FORMAT_ORDER_NORMAL = 0x00000000, + PISP_IMAGE_FORMAT_ORDER_SWAPPED = 0x00001000, + + PISP_IMAGE_FORMAT_SHIFT_0 = 0x00000000, + PISP_IMAGE_FORMAT_SHIFT_1 = 0x00010000, + PISP_IMAGE_FORMAT_SHIFT_2 = 0x00020000, + PISP_IMAGE_FORMAT_SHIFT_3 = 0x00030000, + PISP_IMAGE_FORMAT_SHIFT_4 = 0x00040000, + PISP_IMAGE_FORMAT_SHIFT_5 = 0x00050000, + PISP_IMAGE_FORMAT_SHIFT_6 = 0x00060000, + PISP_IMAGE_FORMAT_SHIFT_7 = 0x00070000, + PISP_IMAGE_FORMAT_SHIFT_8 = 0x00080000, + PISP_IMAGE_FORMAT_SHIFT_MASK = 0x000f0000, + + PISP_IMAGE_FORMAT_BPP_32 = 0x00100000, + + PISP_IMAGE_FORMAT_UNCOMPRESSED = 0x00000000, + PISP_IMAGE_FORMAT_COMPRESSION_MODE_1 = 0x01000000, + PISP_IMAGE_FORMAT_COMPRESSION_MODE_2 = 0x02000000, + PISP_IMAGE_FORMAT_COMPRESSION_MODE_3 = 0x03000000, + PISP_IMAGE_FORMAT_COMPRESSION_MASK = 0x03000000, + + PISP_IMAGE_FORMAT_HOG_SIGNED = 0x04000000, + PISP_IMAGE_FORMAT_HOG_UNSIGNED = 0x08000000, + PISP_IMAGE_FORMAT_INTEGRAL_IMAGE = 0x10000000, + PISP_IMAGE_FORMAT_WALLPAPER_ROLL = 0x20000000, + PISP_IMAGE_FORMAT_THREE_CHANNEL = 0x40000000, + + /* Lastly a few specific instantiations of the above. */ + PISP_IMAGE_FORMAT_SINGLE_16 = PISP_IMAGE_FORMAT_BPS_16, + PISP_IMAGE_FORMAT_THREE_16 = PISP_IMAGE_FORMAT_BPS_16 | + PISP_IMAGE_FORMAT_THREE_CHANNEL +}; + +#define PISP_IMAGE_FORMAT_BPS_8(fmt) \ + (((fmt) & PISP_IMAGE_FORMAT_BPS_MASK) == PISP_IMAGE_FORMAT_BPS_8) +#define PISP_IMAGE_FORMAT_BPS_10(fmt) \ + (((fmt) & PISP_IMAGE_FORMAT_BPS_MASK) == PISP_IMAGE_FORMAT_BPS_10) +#define PISP_IMAGE_FORMAT_BPS_12(fmt) \ + (((fmt) & PISP_IMAGE_FORMAT_BPS_MASK) == PISP_IMAGE_FORMAT_BPS_12) +#define PISP_IMAGE_FORMAT_BPS_16(fmt) \ + (((fmt) & PISP_IMAGE_FORMAT_BPS_MASK) == PISP_IMAGE_FORMAT_BPS_16) +#define PISP_IMAGE_FORMAT_BPS(fmt) \ + (((fmt) & PISP_IMAGE_FORMAT_BPS_MASK) ? \ + 8 + (2 << (((fmt) & PISP_IMAGE_FORMAT_BPS_MASK) - 1)) : 8) +#define PISP_IMAGE_FORMAT_SHIFT(fmt) \ + (((fmt) & PISP_IMAGE_FORMAT_SHIFT_MASK) / PISP_IMAGE_FORMAT_SHIFT_1) +#define PISP_IMAGE_FORMAT_THREE_CHANNEL(fmt) \ + ((fmt) & PISP_IMAGE_FORMAT_THREE_CHANNEL) +#define PISP_IMAGE_FORMAT_SINGLE_CHANNEL(fmt) \ + (!((fmt) & PISP_IMAGE_FORMAT_THREE_CHANNEL)) +#define PISP_IMAGE_FORMAT_COMPRESSED(fmt) \ + (((fmt) & PISP_IMAGE_FORMAT_COMPRESSION_MASK) != \ + PISP_IMAGE_FORMAT_UNCOMPRESSED) +#define PISP_IMAGE_FORMAT_SAMPLING_444(fmt) \ + (((fmt) & PISP_IMAGE_FORMAT_SAMPLING_MASK) == \ + PISP_IMAGE_FORMAT_SAMPLING_444) +#define PISP_IMAGE_FORMAT_SAMPLING_422(fmt) \ + (((fmt) & PISP_IMAGE_FORMAT_SAMPLING_MASK) == \ + PISP_IMAGE_FORMAT_SAMPLING_422) +#define PISP_IMAGE_FORMAT_SAMPLING_420(fmt) \ + (((fmt) & PISP_IMAGE_FORMAT_SAMPLING_MASK) == \ + PISP_IMAGE_FORMAT_SAMPLING_420) +#define PISP_IMAGE_FORMAT_ORDER_NORMAL(fmt) \ + (!((fmt) & PISP_IMAGE_FORMAT_ORDER_SWAPPED)) +#define PISP_IMAGE_FORMAT_ORDER_SWAPPED(fmt) \ + ((fmt) & PISP_IMAGE_FORMAT_ORDER_SWAPPED) +#define PISP_IMAGE_FORMAT_INTERLEAVED(fmt) \ + (((fmt) & PISP_IMAGE_FORMAT_PLANARITY_MASK) == \ + PISP_IMAGE_FORMAT_PLANARITY_INTERLEAVED) +#define PISP_IMAGE_FORMAT_SEMIPLANAR(fmt) \ + (((fmt) & PISP_IMAGE_FORMAT_PLANARITY_MASK) == \ + PISP_IMAGE_FORMAT_PLANARITY_SEMI_PLANAR) +#define PISP_IMAGE_FORMAT_PLANAR(fmt) \ + (((fmt) & PISP_IMAGE_FORMAT_PLANARITY_MASK) == \ + PISP_IMAGE_FORMAT_PLANARITY_PLANAR) +#define PISP_IMAGE_FORMAT_WALLPAPER(fmt) \ + ((fmt) & PISP_IMAGE_FORMAT_WALLPAPER_ROLL) +#define PISP_IMAGE_FORMAT_BPP_32(fmt) ((fmt) & PISP_IMAGE_FORMAT_BPP_32) +#define PISP_IMAGE_FORMAT_HOG(fmt) \ + ((fmt) & \ + (PISP_IMAGE_FORMAT_HOG_SIGNED | PISP_IMAGE_FORMAT_HOG_UNSIGNED)) + +#define PISP_WALLPAPER_WIDTH 128 /* in bytes */ + +struct pisp_bla_config { + __u16 black_level_r; + __u16 black_level_gr; + __u16 black_level_gb; + __u16 black_level_b; + __u16 output_black_level; + __u8 pad[2]; +} __attribute__((packed)); + +struct pisp_wbg_config { + __u16 gain_r; + __u16 gain_g; + __u16 gain_b; + __u8 pad[2]; +} __attribute__((packed)); + +struct pisp_compress_config { + /* value subtracted from incoming data */ + __u16 offset; + __u8 pad; + /* 1 => Companding; 2 => Delta (recommended); 3 => Combined (for HDR) */ + __u8 mode; +} __attribute__((packed)); + +struct pisp_decompress_config { + /* value added to reconstructed data */ + __u16 offset; + __u8 pad; + /* 1 => Companding; 2 => Delta (recommended); 3 => Combined (for HDR) */ + __u8 mode; +} __attribute__((packed)); + +enum pisp_axi_flags { + /* + * round down bursts to end at a 32-byte boundary, to align following + * bursts + */ + PISP_AXI_FLAG_ALIGN = 128, + /* for FE writer: force WSTRB high, to pad output to 16-byte boundary */ + PISP_AXI_FLAG_PAD = 64, + /* for FE writer: Use Output FIFO level to trigger "panic" */ + PISP_AXI_FLAG_PANIC = 32, +}; + +struct pisp_axi_config { + /* + * burst length minus one, which must be in the range 0:15; OR'd with + * flags + */ + __u8 maxlen_flags; + /* { prot[2:0], cache[3:0] } fields, echoed on AXI bus */ + __u8 cache_prot; + /* QoS field(s) (4x4 bits for FE writer; 4 bits for other masters) */ + __u16 qos; +} __attribute__((packed)); + +#endif /* _UAPI_PISP_COMMON_H_ */ diff --git a/include/uapi/linux/mman.h b/include/uapi/linux/mman.h index a246e11988d5..e89d00528f2f 100644 --- a/include/uapi/linux/mman.h +++ b/include/uapi/linux/mman.h @@ -17,6 +17,7 @@ #define MAP_SHARED 0x01 /* Share changes */ #define MAP_PRIVATE 0x02 /* Changes are private */ #define MAP_SHARED_VALIDATE 0x03 /* share + validate extension flags */ +#define MAP_DROPPABLE 0x08 /* Zero memory under memory pressure. */ /* * Huge page size encoding when MAP_HUGETLB is specified, and a huge page diff --git a/include/uapi/linux/mount.h b/include/uapi/linux/mount.h index ad5478dbad00..225bc366ffcb 100644 --- a/include/uapi/linux/mount.h +++ b/include/uapi/linux/mount.h @@ -154,7 +154,7 @@ struct mount_attr { */ struct statmount { __u32 size; /* Total size, including strings */ - __u32 __spare1; + __u32 mnt_opts; /* [str] Mount options of the mount */ __u64 mask; /* What results were written */ __u32 sb_dev_major; /* Device ID */ __u32 sb_dev_minor; @@ -172,7 +172,8 @@ struct statmount { __u64 propagate_from; /* Propagation from in current namespace */ __u32 mnt_root; /* [str] Root of mount relative to root of fs */ __u32 mnt_point; /* [str] Mountpoint relative to current root */ - __u64 __spare2[50]; + __u64 mnt_ns_id; /* ID of the mount namespace */ + __u64 __spare2[49]; char str[]; /* Variable size part containing strings */ }; @@ -188,10 +189,12 @@ struct mnt_id_req { __u32 spare; __u64 mnt_id; __u64 param; + __u64 mnt_ns_id; }; /* List of all mnt_id_req versions. */ #define MNT_ID_REQ_SIZE_VER0 24 /* sizeof first published struct */ +#define MNT_ID_REQ_SIZE_VER1 32 /* sizeof second published struct */ /* * @mask bits for statmount(2) @@ -202,10 +205,13 @@ struct mnt_id_req { #define STATMOUNT_MNT_ROOT 0x00000008U /* Want/got mnt_root */ #define STATMOUNT_MNT_POINT 0x00000010U /* Want/got mnt_point */ #define STATMOUNT_FS_TYPE 0x00000020U /* Want/got fs_type */ +#define STATMOUNT_MNT_NS_ID 0x00000040U /* Want/got mnt_ns_id */ +#define STATMOUNT_MNT_OPTS 0x00000080U /* Want/got mnt_opts */ /* * Special @mnt_id values that can be passed to listmount */ #define LSMT_ROOT 0xffffffffffffffff /* root mount */ +#define LISTMOUNT_REVERSE (1 << 0) /* List later mounts first */ #endif /* _UAPI_LINUX_MOUNT_H */ diff --git a/include/uapi/linux/mptcp.h b/include/uapi/linux/mptcp.h index 74cfe496891e..67d015df8893 100644 --- a/include/uapi/linux/mptcp.h +++ b/include/uapi/linux/mptcp.h @@ -58,6 +58,10 @@ struct mptcp_info { __u64 mptcpi_bytes_received; __u64 mptcpi_bytes_acked; __u8 mptcpi_subflows_total; + __u8 reserved[3]; + __u32 mptcpi_last_data_sent; + __u32 mptcpi_last_data_recv; + __u32 mptcpi_last_ack_recv; }; /* MPTCP Reset reason codes, rfc8684 */ diff --git a/include/uapi/linux/netdev.h b/include/uapi/linux/netdev.h index bb65ee840cda..43742ac5b00d 100644 --- a/include/uapi/linux/netdev.h +++ b/include/uapi/linux/netdev.h @@ -146,6 +146,28 @@ enum { NETDEV_A_QSTATS_TX_PACKETS, NETDEV_A_QSTATS_TX_BYTES, NETDEV_A_QSTATS_RX_ALLOC_FAIL, + NETDEV_A_QSTATS_RX_HW_DROPS, + NETDEV_A_QSTATS_RX_HW_DROP_OVERRUNS, + NETDEV_A_QSTATS_RX_CSUM_COMPLETE, + NETDEV_A_QSTATS_RX_CSUM_UNNECESSARY, + NETDEV_A_QSTATS_RX_CSUM_NONE, + NETDEV_A_QSTATS_RX_CSUM_BAD, + NETDEV_A_QSTATS_RX_HW_GRO_PACKETS, + NETDEV_A_QSTATS_RX_HW_GRO_BYTES, + NETDEV_A_QSTATS_RX_HW_GRO_WIRE_PACKETS, + NETDEV_A_QSTATS_RX_HW_GRO_WIRE_BYTES, + NETDEV_A_QSTATS_RX_HW_DROP_RATELIMITS, + NETDEV_A_QSTATS_TX_HW_DROPS, + NETDEV_A_QSTATS_TX_HW_DROP_ERRORS, + NETDEV_A_QSTATS_TX_CSUM_NONE, + NETDEV_A_QSTATS_TX_NEEDS_CSUM, + NETDEV_A_QSTATS_TX_HW_GSO_PACKETS, + NETDEV_A_QSTATS_TX_HW_GSO_BYTES, + NETDEV_A_QSTATS_TX_HW_GSO_WIRE_PACKETS, + NETDEV_A_QSTATS_TX_HW_GSO_WIRE_BYTES, + NETDEV_A_QSTATS_TX_HW_DROP_RATELIMITS, + NETDEV_A_QSTATS_TX_STOP, + NETDEV_A_QSTATS_TX_WAKE, __NETDEV_A_QSTATS_MAX, NETDEV_A_QSTATS_MAX = (__NETDEV_A_QSTATS_MAX - 1) diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h index aa4094ca2444..639894ed1b97 100644 --- a/include/uapi/linux/netfilter/nf_tables.h +++ b/include/uapi/linux/netfilter/nf_tables.h @@ -1376,7 +1376,7 @@ enum nft_secmark_attributes { #define NFTA_SECMARK_MAX (__NFTA_SECMARK_MAX - 1) /* Max security context length */ -#define NFT_SECMARK_CTX_MAXLEN 256 +#define NFT_SECMARK_CTX_MAXLEN 4096 /** * enum nft_reject_types - nf_tables reject expression reject types diff --git a/include/uapi/linux/nfs.h b/include/uapi/linux/nfs.h index 946cb62d64b0..f356f2ba3814 100644 --- a/include/uapi/linux/nfs.h +++ b/include/uapi/linux/nfs.h @@ -61,7 +61,6 @@ NFSERR_NOSPC = 28, /* v2 v3 v4 */ NFSERR_ROFS = 30, /* v2 v3 v4 */ NFSERR_MLINK = 31, /* v3 v4 */ - NFSERR_OPNOTSUPP = 45, /* v2 v3 */ NFSERR_NAMETOOLONG = 63, /* v2 v3 v4 */ NFSERR_NOTEMPTY = 66, /* v2 v3 v4 */ NFSERR_DQUOT = 69, /* v2 v3 v4 */ diff --git a/include/uapi/linux/nfs4.h b/include/uapi/linux/nfs4.h index 1d2043708bf1..caf4db2fcbb9 100644 --- a/include/uapi/linux/nfs4.h +++ b/include/uapi/linux/nfs4.h @@ -46,6 +46,7 @@ #define NFS4_OPEN_RESULT_CONFIRM 0x0002 #define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004 #define NFS4_OPEN_RESULT_PRESERVE_UNLINKED 0x0008 +#define NFS4_OPEN_RESULT_NO_OPEN_STATEID 0x0010 #define NFS4_OPEN_RESULT_MAY_NOTIFY_LOCK 0x0020 #define NFS4_SHARE_ACCESS_MASK 0x000F @@ -69,6 +70,9 @@ #define NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL 0x10000 #define NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED 0x20000 +#define NFS4_SHARE_WANT_DELEG_TIMESTAMPS 0x100000 +#define NFS4_SHARE_WANT_OPEN_XOR_DELEGATION 0x200000 + #define NFS4_CDFC4_FORE 0x1 #define NFS4_CDFC4_BACK 0x2 #define NFS4_CDFC4_BOTH 0x3 diff --git a/include/uapi/linux/nfsd_netlink.h b/include/uapi/linux/nfsd_netlink.h index 3cd044edee5d..887cbd12b695 100644 --- a/include/uapi/linux/nfsd_netlink.h +++ b/include/uapi/linux/nfsd_netlink.h @@ -30,7 +30,64 @@ enum { }; enum { + NFSD_A_SERVER_THREADS = 1, + NFSD_A_SERVER_GRACETIME, + NFSD_A_SERVER_LEASETIME, + NFSD_A_SERVER_SCOPE, + + __NFSD_A_SERVER_MAX, + NFSD_A_SERVER_MAX = (__NFSD_A_SERVER_MAX - 1) +}; + +enum { + NFSD_A_VERSION_MAJOR = 1, + NFSD_A_VERSION_MINOR, + NFSD_A_VERSION_ENABLED, + + __NFSD_A_VERSION_MAX, + NFSD_A_VERSION_MAX = (__NFSD_A_VERSION_MAX - 1) +}; + +enum { + NFSD_A_SERVER_PROTO_VERSION = 1, + + __NFSD_A_SERVER_PROTO_MAX, + NFSD_A_SERVER_PROTO_MAX = (__NFSD_A_SERVER_PROTO_MAX - 1) +}; + +enum { + NFSD_A_SOCK_ADDR = 1, + NFSD_A_SOCK_TRANSPORT_NAME, + + __NFSD_A_SOCK_MAX, + NFSD_A_SOCK_MAX = (__NFSD_A_SOCK_MAX - 1) +}; + +enum { + NFSD_A_SERVER_SOCK_ADDR = 1, + + __NFSD_A_SERVER_SOCK_MAX, + NFSD_A_SERVER_SOCK_MAX = (__NFSD_A_SERVER_SOCK_MAX - 1) +}; + +enum { + NFSD_A_POOL_MODE_MODE = 1, + NFSD_A_POOL_MODE_NPOOLS, + + __NFSD_A_POOL_MODE_MAX, + NFSD_A_POOL_MODE_MAX = (__NFSD_A_POOL_MODE_MAX - 1) +}; + +enum { NFSD_CMD_RPC_STATUS_GET = 1, + NFSD_CMD_THREADS_SET, + NFSD_CMD_THREADS_GET, + NFSD_CMD_VERSION_SET, + NFSD_CMD_VERSION_GET, + NFSD_CMD_LISTENER_SET, + NFSD_CMD_LISTENER_GET, + NFSD_CMD_POOL_MODE_SET, + NFSD_CMD_POOL_MODE_GET, __NFSD_CMD_MAX, NFSD_CMD_MAX = (__NFSD_CMD_MAX - 1) diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index f23ecbdd84a2..f97f5adc8d51 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -413,8 +413,8 @@ * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL, * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID, - * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, - * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, + * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHER_SUITES_PAIRWISE, + * %NL80211_ATTR_CIPHER_SUITE_GROUP, %NL80211_ATTR_WPA_VERSIONS, * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. @@ -442,20 +442,15 @@ * stations connected and using at least that link as one of its links. * * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to - * destination %NL80211_ATTR_MAC on the interface identified by - * %NL80211_ATTR_IFINDEX. + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to - * destination %NL80211_ATTR_MAC on the interface identified by - * %NL80211_ATTR_IFINDEX. + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP. * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by * %NL80211_ATTR_MAC. - * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the - * interface identified by %NL80211_ATTR_IFINDEX. - * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC - * or, if no MAC address given, all mesh paths, on the interface identified - * by %NL80211_ATTR_IFINDEX. * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by * %NL80211_ATTR_IFINDEX. * @@ -476,15 +471,15 @@ * after being queried by the kernel. CRDA replies by sending a regulatory * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our * current alpha2 if it found a match. It also provides - * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each - * regulatory rule is a nested set of attributes given by - * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and - * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by - * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and - * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. + * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each + * regulatory rule is a nested set of attributes given by + * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and + * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by + * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and + * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain - * to the specified ISO/IEC 3166-1 alpha2 country code. The core will - * store this as a valid request and then query userspace for it. + * to the specified ISO/IEC 3166-1 alpha2 country code. The core will + * store this as a valid request and then query userspace for it. * * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the * interface identified by %NL80211_ATTR_IFINDEX @@ -574,31 +569,31 @@ * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. * * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain - * has been changed and provides details of the request information - * that caused the change such as who initiated the regulatory request - * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx - * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if - * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or - * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain - * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is - * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on - * to (%NL80211_ATTR_REG_ALPHA2). + * has been changed and provides details of the request information + * that caused the change such as who initiated the regulatory request + * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx + * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if + * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or + * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain + * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is + * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on + * to (%NL80211_ATTR_REG_ALPHA2). * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon - * has been found while world roaming thus enabling active scan or - * any mode of operation that initiates TX (beacons) on a channel - * where we would not have been able to do either before. As an example - * if you are world roaming (regulatory domain set to world or if your - * driver is using a custom world roaming regulatory domain) and while - * doing a passive scan on the 5 GHz band you find an AP there (if not - * on a DFS channel) you will now be able to actively scan for that AP - * or use AP mode on your card on that same channel. Note that this will - * never be used for channels 1-11 on the 2 GHz band as they are always - * enabled world wide. This beacon hint is only sent if your device had - * either disabled active scanning or beaconing on a channel. We send to - * userspace the wiphy on which we removed a restriction from - * (%NL80211_ATTR_WIPHY) and the channel on which this occurred - * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) - * the beacon hint was processed. + * has been found while world roaming thus enabling active scan or + * any mode of operation that initiates TX (beacons) on a channel + * where we would not have been able to do either before. As an example + * if you are world roaming (regulatory domain set to world or if your + * driver is using a custom world roaming regulatory domain) and while + * doing a passive scan on the 5 GHz band you find an AP there (if not + * on a DFS channel) you will now be able to actively scan for that AP + * or use AP mode on your card on that same channel. Note that this will + * never be used for channels 1-11 on the 2 GHz band as they are always + * enabled world wide. This beacon hint is only sent if your device had + * either disabled active scanning or beaconing on a channel. We send to + * userspace the wiphy on which we removed a restriction from + * (%NL80211_ATTR_WIPHY) and the channel on which this occurred + * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) + * the beacon hint was processed. * * @NL80211_CMD_AUTHENTICATE: authentication request and notification. * This command is used both as a command (request to authenticate) and @@ -1120,7 +1115,7 @@ * current configuration is not changed. If it is present but * set to zero, the configuration is changed to don't-care * (i.e. the device can decide what to do). - * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported. + * @NL80211_CMD_NAN_MATCH: Notification sent when a match is reported. * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and * %NL80211_ATTR_COOKIE. * @@ -1715,21 +1710,21 @@ enum nl80211_commands { * (see &enum nl80211_plink_action). * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path - * info given for %NL80211_CMD_GET_MPATH, nested attribute described at + * info given for %NL80211_CMD_GET_MPATH, nested attribute described at * &enum nl80211_mpath_info. * * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of * &enum nl80211_mntr_flags. * * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the - * current regulatory domain should be set to or is already set to. - * For example, 'CR', for Costa Rica. This attribute is used by the kernel - * to query the CRDA to retrieve one regulatory domain. This attribute can - * also be used by userspace to query the kernel for the currently set - * regulatory domain. We chose an alpha2 as that is also used by the - * IEEE-802.11 country information element to identify a country. - * Users can also simply ask the wireless core to set regulatory domain - * to a specific alpha2. + * current regulatory domain should be set to or is already set to. + * For example, 'CR', for Costa Rica. This attribute is used by the kernel + * to query the CRDA to retrieve one regulatory domain. This attribute can + * also be used by userspace to query the kernel for the currently set + * regulatory domain. We chose an alpha2 as that is also used by the + * IEEE-802.11 country information element to identify a country. + * Users can also simply ask the wireless core to set regulatory domain + * to a specific alpha2. * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory * rules. * @@ -1772,9 +1767,9 @@ enum nl80211_commands { * @NL80211_ATTR_BSS: scan result BSS * * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain - * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* + * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently - * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) + * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) * * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies * an array of command numbers (i.e. a mapping index to command number) @@ -1793,15 +1788,15 @@ enum nl80211_commands { * a u32 * * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change - * due to considerations from a beacon hint. This attribute reflects - * the state of the channel _before_ the beacon hint processing. This - * attributes consists of a nested attribute containing - * NL80211_FREQUENCY_ATTR_* + * due to considerations from a beacon hint. This attribute reflects + * the state of the channel _before_ the beacon hint processing. This + * attributes consists of a nested attribute containing + * NL80211_FREQUENCY_ATTR_* * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change - * due to considerations from a beacon hint. This attribute reflects - * the state of the channel _after_ the beacon hint processing. This - * attributes consists of a nested attribute containing - * NL80211_FREQUENCY_ATTR_* + * due to considerations from a beacon hint. This attribute reflects + * the state of the channel _after_ the beacon hint processing. This + * attributes consists of a nested attribute containing + * NL80211_FREQUENCY_ATTR_* * * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported * cipher suites @@ -1862,12 +1857,6 @@ enum nl80211_commands { * that protected APs should be used. This is also used with NEW_BEACON to * indicate that the BSS is to use protection. * - * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON - * to indicate which unicast key ciphers will be used with the connection - * (an array of u32). - * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to - * indicate which group key cipher will be used with the connection (a - * u32). * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to * indicate which WPA version(s) the AP we want to associate with is using * (a u32 with flags from &enum nl80211_wpa_versions). @@ -1898,6 +1887,7 @@ enum nl80211_commands { * with %NL80211_KEY_* sub-attributes * * @NL80211_ATTR_PID: Process ID of a network namespace. + * @NL80211_ATTR_NETNS_FD: File descriptor of a network namespace. * * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for * dumps. This number increases whenever the object list being @@ -1952,6 +1942,7 @@ enum nl80211_commands { * * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was * acknowledged by the recipient. + * @NL80211_ATTR_ACK_SIGNAL: Station's ack signal strength (s32) * * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values. * @@ -2061,6 +2052,10 @@ enum nl80211_commands { * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported * interface combinations. In each nested item, it contains attributes * defined in &enum nl80211_if_combination_attrs. + * If the wiphy uses multiple radios (@NL80211_ATTR_WIPHY_RADIOS is set), + * this attribute contains the interface combinations of the first radio. + * See @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS for the global wiphy + * combinations for the sum of all radios. * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that * are managed in software: interfaces of these types aren't subject to @@ -2149,6 +2144,9 @@ enum nl80211_commands { * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable * this feature during association. This is a flag attribute. * Currently only supported in mac80211 drivers. + * @NL80211_ATTR_DISABLE_EHT: Force EHT capable interfaces to disable + * this feature during association. This is a flag attribute. + * Currently only supported in mac80211 drivers. * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the * ATTR_HT_CAPABILITY to which attention should be paid. * Currently, only mac80211 NICs support this feature. @@ -2158,6 +2156,12 @@ enum nl80211_commands { * All values are treated as suggestions and may be ignored * by the driver as required. The actual values may be seen in * the station debugfs ht_caps file. + * @NL80211_ATTR_VHT_CAPABILITY_MASK: Specify which bits of the + * ATTR_VHT_CAPABILITY to which attention should be paid. + * Currently, only mac80211 NICs support this feature. + * All values are treated as suggestions and may be ignored + * by the driver as required. The actual values may be seen in + * the station debugfs vht_caps file. * * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country * abides to when initiating radiation on DFS channels. A country maps @@ -2416,7 +2420,7 @@ enum nl80211_commands { * scheduled scan is started. Or the delay before a WoWLAN * net-detect scan is started, counting from the moment the * system is suspended. This value is a u32, in seconds. - + * * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device * is operating in an indoor environment. * @@ -2856,6 +2860,14 @@ enum nl80211_commands { * %NL80211_CMD_ASSOCIATE indicating the SPP A-MSDUs * are used on this connection * + * @NL80211_ATTR_WIPHY_RADIOS: Nested attribute describing physical radios + * belonging to this wiphy. See &enum nl80211_wiphy_radio_attrs. + * + * @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS: Nested attribute listing the + * supported interface combinations for all radios combined. In each + * nested item, it contains attributes defined in + * &enum nl80211_if_combination_attrs. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3401,6 +3413,9 @@ enum nl80211_attrs { NL80211_ATTR_ASSOC_SPP_AMSDU, + NL80211_ATTR_WIPHY_RADIOS, + NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3565,7 +3580,7 @@ enum nl80211_sta_flags { * enum nl80211_sta_p2p_ps_status - station support of P2P PS * * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism - * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism + * @NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism * @NUM_NL80211_P2P_PS_STATUS: number of values */ enum nl80211_sta_p2p_ps_status { @@ -3603,9 +3618,9 @@ enum nl80211_he_gi { /** * enum nl80211_he_ltf - HE long training field - * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec - * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec - * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec + * @NL80211_RATE_INFO_HE_1XLTF: 3.2 usec + * @NL80211_RATE_INFO_HE_2XLTF: 6.4 usec + * @NL80211_RATE_INFO_HE_4XLTF: 12.8 usec */ enum nl80211_he_ltf { NL80211_RATE_INFO_HE_1XLTF, @@ -3720,7 +3735,7 @@ enum nl80211_eht_ru_alloc { * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier * (u8, see &enum nl80211_he_gi) * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1) - * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then + * @NL80211_RATE_INFO_HE_RU_ALLOC: HE RU allocation, if not present then * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc) * @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate * @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15) @@ -3823,7 +3838,7 @@ enum nl80211_sta_bss_param { * (u64, to this station) * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute - * containing info as possible, see &enum nl80211_rate_info + * containing info as possible, see &enum nl80211_rate_info * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs) * (u32, from this station) * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs) @@ -3852,8 +3867,8 @@ enum nl80211_sta_bss_param { * Contains a nested array of signal strength attributes (u8, dBm) * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. - * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the - * 802.11 header (u32, kbps) + * @NL80211_STA_INFO_EXPECTED_THROUGHPUT: expected throughput considering also + * the 802.11 header (u32, kbps) * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons * (u64) * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64) @@ -4039,7 +4054,7 @@ enum nl80211_mpath_flags { * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in - * &enum nl80211_mpath_flags; + * &enum nl80211_mpath_flags; * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination @@ -4179,7 +4194,7 @@ enum nl80211_band_attr { * @NL80211_WMMR_CW_MAX: Maximum contention window slot. * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space. * @NL80211_WMMR_TXOP: Maximum allowed tx operation time. - * @nl80211_WMMR_MAX: highest possible wmm rule. + * @NL80211_WMMR_MAX: highest possible wmm rule. * @__NL80211_WMMR_LAST: Internal use. */ enum nl80211_wmm_rule { @@ -4201,8 +4216,9 @@ enum nl80211_wmm_rule { * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current * regulatory domain. * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation - * are permitted on this channel, this includes sending probe - * requests, or modes of operation that require beaconing. + * are permitted on this channel, this includes sending probe + * requests, or modes of operation that require beaconing. + * @__NL80211_FREQUENCY_ATTR_NO_IBSS: obsolete, same as _NO_IR * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm @@ -4276,6 +4292,8 @@ enum nl80211_wmm_rule { * @NL80211_FREQUENCY_ATTR_CAN_MONITOR: This channel can be used in monitor * mode despite other (regulatory) restrictions, even if the channel is * otherwise completely disabled. + * @NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP: This channel can be used for a + * very low power (VLP) AP, despite being NO_IR. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -4319,6 +4337,7 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT, NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT, NL80211_FREQUENCY_ATTR_CAN_MONITOR, + NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -4357,16 +4376,16 @@ enum nl80211_bitrate_attr { }; /** - * enum nl80211_initiator - Indicates the initiator of a reg domain request + * enum nl80211_reg_initiator - Indicates the initiator of a reg domain request * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world - * regulatory domain. + * regulatory domain. * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the - * regulatory domain. + * regulatory domain. * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the - * wireless core it thinks its knows the regulatory domain we should be in. + * wireless core it thinks its knows the regulatory domain we should be in. * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an - * 802.11 country information element with regulatory information it - * thinks we should consider. cfg80211 only processes the country + * 802.11 country information element with regulatory information it + * thinks we should consider. cfg80211 only processes the country * code from the IE, and relies on the regulatory domain information * structure passed by userspace (CRDA) from our wireless-regdb. * If a channel is enabled but the country code indicates it should @@ -4385,11 +4404,11 @@ enum nl80211_reg_initiator { * to a specific country. When this is set you can count on the * ISO / IEC 3166 alpha2 country code being valid. * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory - * domain. + * domain. * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom - * driver specific world regulatory domain. These do not apply system-wide - * and are only applicable to the individual devices which have requested - * them to be applied. + * driver specific world regulatory domain. These do not apply system-wide + * and are only applicable to the individual devices which have requested + * them to be applied. * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product * of an intersection between two regulatory domains -- the previously * set regulatory domain on the system and the last accepted regulatory @@ -4406,21 +4425,21 @@ enum nl80211_reg_type { * enum nl80211_reg_rule_attr - regulatory rule attributes * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional - * considerations for a given frequency range. These are the - * &enum nl80211_reg_rule_flags. + * considerations for a given frequency range. These are the + * &enum nl80211_reg_rule_flags. * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory - * rule in KHz. This is not a center of frequency but an actual regulatory - * band edge. + * rule in KHz. This is not a center of frequency but an actual regulatory + * band edge. * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule - * in KHz. This is not a center a frequency but an actual regulatory - * band edge. + * in KHz. This is not a center a frequency but an actual regulatory + * band edge. * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this * frequency range, in KHz. * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain - * for a given frequency range. The value is in mBi (100 * dBi). - * If you don't have one then don't send this. + * for a given frequency range. The value is in mBi (100 * dBi). + * If you don't have one then don't send this. * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for - * a given frequency range. The value is in mBm (100 * dBm). + * a given frequency range. The value is in mBm (100 * dBm). * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. * If not present or 0 default CAC time will be used. * @NL80211_ATTR_POWER_RULE_PSD: power spectral density (in dBm). @@ -4507,8 +4526,9 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed, - * this includes probe requests or modes of operation that require - * beaconing. + * this includes probe requests or modes of operation that require + * beaconing. + * @__NL80211_RRF_NO_IBSS: obsolete, same as NO_IR * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated * base on contiguous rules and wider channels will be allowed to cross * multiple contiguous/overlapping frequency ranges. @@ -4522,11 +4542,13 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_NO_EHT: EHT operation not allowed * @NL80211_RRF_PSD: Ruleset has power spectral density value * @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for - peer-to-peer or adhoc communication under the control of a DFS master - which operates on the same channel (FCC-594280 D01 Section B.3). - Should be used together with %NL80211_RRF_DFS only. + * peer-to-peer or adhoc communication under the control of a DFS master + * which operates on the same channel (FCC-594280 D01 Section B.3). + * Should be used together with %NL80211_RRF_DFS only. * @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed + * @NL80211_RRF_ALLOW_6GHZ_VLP_AP: Very low power (VLP) AP can be permitted + * despite NO_IR configuration. */ enum nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1<<0, @@ -4551,6 +4573,7 @@ enum nl80211_reg_rule_flags { NL80211_RRF_DFS_CONCURRENT = 1<<21, NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1<<22, NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1<<23, + NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1<<24, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR @@ -4707,8 +4730,8 @@ enum nl80211_mntr_flags { * alternate between Active and Doze states, but may not wake up * for neighbor's beacons. * - * @__NL80211_MESH_POWER_AFTER_LAST - internal use - * @NL80211_MESH_POWER_MAX - highest possible power save level + * @__NL80211_MESH_POWER_AFTER_LAST: internal use + * @NL80211_MESH_POWER_MAX: highest possible power save level */ enum nl80211_mesh_power_mode { @@ -5728,7 +5751,7 @@ struct nl80211_pattern_support { * "TCP connection wakeup" for more details. This is a nested attribute * containing the exact information for establishing and keeping alive * the TCP connection. - * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH: For wakeup reporting only, the * wakeup packet was received on the TCP connection * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the * TCP connection was lost or failed to be established @@ -6077,7 +6100,7 @@ enum nl80211_plink_state { * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer * @NUM_NL80211_PLINK_ACTIONS: number of possible actions */ -enum plink_actions { +enum nl80211_plink_action { NL80211_PLINK_ACTION_NO_ACTION, NL80211_PLINK_ACTION_OPEN, NL80211_PLINK_ACTION_BLOCK, @@ -6404,6 +6427,7 @@ enum nl80211_feature_flags { * receiving control port frames over nl80211 instead of the netdevice. * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports * (average) ACK signal strength reporting. + * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: Backward-compatible ID * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate * TXQs. * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the @@ -6787,6 +6811,8 @@ enum nl80211_acl_policy { * @NL80211_SMPS_STATIC: static SMPS (use a single antenna) * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and * turn on other antennas after CTS/RTS). + * @__NL80211_SMPS_AFTER_LAST: internal + * @NL80211_SMPS_MAX: highest used enumeration */ enum nl80211_smps_mode { NL80211_SMPS_OFF, @@ -7008,6 +7034,8 @@ enum nl80211_bss_select_attr { * @NL80211_NAN_FUNC_PUBLISH: function is publish * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up + * @__NL80211_NAN_FUNC_TYPE_AFTER_LAST: internal use + * @NL80211_NAN_FUNC_MAX_TYPE: internal use */ enum nl80211_nan_function_type { NL80211_NAN_FUNC_PUBLISH, @@ -7168,7 +7196,7 @@ enum nl80211_nan_match_attributes { }; /** - * nl80211_external_auth_action - Action to perform with external + * enum nl80211_external_auth_action - Action to perform with external * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION. * @NL80211_EXTERNAL_AUTH_START: Start the authentication. * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication. @@ -7186,7 +7214,7 @@ enum nl80211_external_auth_action { * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element * (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10), * i.e. starting with the measurement token - * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element + * @NL80211_FTM_RESP_ATTR_CIVICLOC: The content of Measurement Report Element * (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13), * i.e. starting with the measurement token * @__NL80211_FTM_RESP_ATTR_LAST: Internal @@ -7829,6 +7857,7 @@ enum nl80211_sae_pwe_mechanism { * * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit * + * @NUM_NL80211_SAR_TYPE: internal */ enum nl80211_sar_type { NL80211_SAR_TYPE_POWER, @@ -7842,6 +7871,8 @@ enum nl80211_sar_type { /** * enum nl80211_sar_attrs - Attributes for SAR spec * + * @__NL80211_SAR_ATTR_INVALID: Invalid + * * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type. * * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power @@ -7873,6 +7904,8 @@ enum nl80211_sar_attrs { /** * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs * + * @__NL80211_SAR_ATTR_SPECS_INVALID: Invalid + * * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual * power limit value in units of 0.25 dBm if type is * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm). @@ -7987,4 +8020,54 @@ enum nl80211_ap_settings_flags { NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1, }; +/** + * enum nl80211_wiphy_radio_attrs - wiphy radio attributes + * + * @__NL80211_WIPHY_RADIO_ATTR_INVALID: Invalid + * + * @NL80211_WIPHY_RADIO_ATTR_INDEX: Index of this radio (u32) + * @NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE: Frequency range supported by this + * radio. Attribute may be present multiple times. + * @NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION: Supported interface + * combination for this radio. Attribute may be present multiple times + * and contains attributes defined in &enum nl80211_if_combination_attrs. + * + * @__NL80211_WIPHY_RADIO_ATTR_LAST: Internal + * @NL80211_WIPHY_RADIO_ATTR_MAX: Highest attribute + */ +enum nl80211_wiphy_radio_attrs { + __NL80211_WIPHY_RADIO_ATTR_INVALID, + + NL80211_WIPHY_RADIO_ATTR_INDEX, + NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE, + NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION, + + /* keep last */ + __NL80211_WIPHY_RADIO_ATTR_LAST, + NL80211_WIPHY_RADIO_ATTR_MAX = __NL80211_WIPHY_RADIO_ATTR_LAST - 1, +}; + +/** + * enum nl80211_wiphy_radio_freq_range - wiphy radio frequency range + * + * @__NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID: Invalid + * + * @NL80211_WIPHY_RADIO_FREQ_ATTR_START: Frequency range start (u32). + * The unit is kHz. + * @NL80211_WIPHY_RADIO_FREQ_ATTR_END: Frequency range end (u32). + * The unit is kHz. + * + * @__NL80211_WIPHY_RADIO_FREQ_ATTR_LAST: Internal + * @NL80211_WIPHY_RADIO_FREQ_ATTR_MAX: Highest attribute + */ +enum nl80211_wiphy_radio_freq_range { + __NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID, + + NL80211_WIPHY_RADIO_FREQ_ATTR_START, + NL80211_WIPHY_RADIO_FREQ_ATTR_END, + + __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST, + NL80211_WIPHY_RADIO_FREQ_ATTR_MAX = __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST - 1, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/uapi/linux/nsfs.h b/include/uapi/linux/nsfs.h index a0c8552b64ee..b133211331f6 100644 --- a/include/uapi/linux/nsfs.h +++ b/include/uapi/linux/nsfs.h @@ -15,5 +15,15 @@ #define NS_GET_NSTYPE _IO(NSIO, 0x3) /* Get owner UID (in the caller's user namespace) for a user namespace */ #define NS_GET_OWNER_UID _IO(NSIO, 0x4) +/* Get the id for a mount namespace */ +#define NS_GET_MNTNS_ID _IO(NSIO, 0x5) +/* Translate pid from target pid namespace into the caller's pid namespace. */ +#define NS_GET_PID_FROM_PIDNS _IOR(NSIO, 0x6, int) +/* Return thread-group leader id of pid in the callers pid namespace. */ +#define NS_GET_TGID_FROM_PIDNS _IOR(NSIO, 0x7, int) +/* Translate pid from caller's pid namespace into a target pid namespace. */ +#define NS_GET_PID_IN_PIDNS _IOR(NSIO, 0x8, int) +/* Return thread-group leader id of pid in the target pid namespace. */ +#define NS_GET_TGID_IN_PIDNS _IOR(NSIO, 0x9, int) #endif /* __LINUX_NSFS_H */ diff --git a/include/uapi/linux/ntsync.h b/include/uapi/linux/ntsync.h new file mode 100644 index 000000000000..dcfa38fdc93c --- /dev/null +++ b/include/uapi/linux/ntsync.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Kernel support for NT synchronization primitive emulation + * + * Copyright (C) 2021-2022 Elizabeth Figura <zfigura@codeweavers.com> + */ + +#ifndef __LINUX_NTSYNC_H +#define __LINUX_NTSYNC_H + +#include <linux/types.h> + +struct ntsync_sem_args { + __u32 sem; + __u32 count; + __u32 max; +}; + +#define NTSYNC_IOC_CREATE_SEM _IOWR('N', 0x80, struct ntsync_sem_args) + +#define NTSYNC_IOC_SEM_POST _IOWR('N', 0x81, __u32) + +#endif diff --git a/include/uapi/linux/openvswitch.h b/include/uapi/linux/openvswitch.h index efc82c318fa2..3a701bd1f31b 100644 --- a/include/uapi/linux/openvswitch.h +++ b/include/uapi/linux/openvswitch.h @@ -649,7 +649,8 @@ enum ovs_flow_attr { * Actions are passed as nested attributes. * * Executes the specified actions with the given probability on a per-packet - * basis. + * basis. Nested actions will be able to access the probability value of the + * parent @OVS_ACTION_ATTR_SAMPLE. */ enum ovs_sample_attr { OVS_SAMPLE_ATTR_UNSPEC, @@ -914,6 +915,31 @@ struct check_pkt_len_arg { }; #endif +#define OVS_PSAMPLE_COOKIE_MAX_SIZE 16 +/** + * enum ovs_psample_attr - Attributes for %OVS_ACTION_ATTR_PSAMPLE + * action. + * + * @OVS_PSAMPLE_ATTR_GROUP: 32-bit number to identify the source of the + * sample. + * @OVS_PSAMPLE_ATTR_COOKIE: An optional variable-length binary cookie that + * contains user-defined metadata. The maximum length is + * OVS_PSAMPLE_COOKIE_MAX_SIZE bytes. + * + * Sends the packet to the psample multicast group with the specified group and + * cookie. It is possible to combine this action with the + * %OVS_ACTION_ATTR_TRUNC action to limit the size of the sample. + */ +enum ovs_psample_attr { + OVS_PSAMPLE_ATTR_GROUP = 1, /* u32 number. */ + OVS_PSAMPLE_ATTR_COOKIE, /* Optional, user specified cookie. */ + + /* private: */ + __OVS_PSAMPLE_ATTR_MAX +}; + +#define OVS_PSAMPLE_ATTR_MAX (__OVS_PSAMPLE_ATTR_MAX - 1) + /** * enum ovs_action_attr - Action types. * @@ -966,6 +992,8 @@ struct check_pkt_len_arg { * of l3 tunnel flag in the tun_flags field of OVS_ACTION_ATTR_ADD_MPLS * argument. * @OVS_ACTION_ATTR_DROP: Explicit drop action. + * @OVS_ACTION_ATTR_PSAMPLE: Send a sample of the packet to external observers + * via psample. * * Only a single header can be set with a single %OVS_ACTION_ATTR_SET. Not all * fields within a header are modifiable, e.g. the IPv4 protocol and fragment @@ -1004,6 +1032,7 @@ enum ovs_action_attr { OVS_ACTION_ATTR_ADD_MPLS, /* struct ovs_action_add_mpls. */ OVS_ACTION_ATTR_DEC_TTL, /* Nested OVS_DEC_TTL_ATTR_*. */ OVS_ACTION_ATTR_DROP, /* u32 error code. */ + OVS_ACTION_ATTR_PSAMPLE, /* Nested OVS_PSAMPLE_ATTR_*. */ __OVS_ACTION_ATTR_MAX, /* Nothing past this will be accepted * from userspace. */ diff --git a/include/uapi/linux/papr_pdsm.h b/include/uapi/linux/papr_pdsm.h new file mode 100644 index 000000000000..17439925045c --- /dev/null +++ b/include/uapi/linux/papr_pdsm.h @@ -0,0 +1,165 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * PAPR nvDimm Specific Methods (PDSM) and structs for libndctl + * + * (C) Copyright IBM 2020 + * + * Author: Vaibhav Jain <vaibhav at linux.ibm.com> + */ + +#ifndef _UAPI_ASM_POWERPC_PAPR_PDSM_H_ +#define _UAPI_ASM_POWERPC_PAPR_PDSM_H_ + +#include <linux/types.h> +#include <linux/ndctl.h> + +/* + * PDSM Envelope: + * + * The ioctl ND_CMD_CALL exchange data between user-space and kernel via + * envelope which consists of 2 headers sections and payload sections as + * illustrated below: + * +-----------------+---------------+---------------------------+ + * | 64-Bytes | 8-Bytes | Max 184-Bytes | + * +-----------------+---------------+---------------------------+ + * | ND-HEADER | PDSM-HEADER | PDSM-PAYLOAD | + * +-----------------+---------------+---------------------------+ + * | nd_family | | | + * | nd_size_out | cmd_status | | + * | nd_size_in | reserved | nd_pdsm_payload | + * | nd_command | payload --> | | + * | nd_fw_size | | | + * | nd_payload ---> | | | + * +---------------+-----------------+---------------------------+ + * + * ND Header: + * This is the generic libnvdimm header described as 'struct nd_cmd_pkg' + * which is interpreted by libnvdimm before passed on to papr_scm. Important + * member fields used are: + * 'nd_family' : (In) NVDIMM_FAMILY_PAPR_SCM + * 'nd_size_in' : (In) PDSM-HEADER + PDSM-IN-PAYLOAD (usually 0) + * 'nd_size_out' : (In) PDSM-HEADER + PDSM-RETURN-PAYLOAD + * 'nd_command' : (In) One of PAPR_PDSM_XXX + * 'nd_fw_size' : (Out) PDSM-HEADER + size of actual payload returned + * + * PDSM Header: + * This is papr-scm specific header that precedes the payload. This is defined + * as nd_cmd_pdsm_pkg. Following fields aare available in this header: + * + * 'cmd_status' : (Out) Errors if any encountered while servicing PDSM. + * 'reserved' : Not used, reserved for future and should be set to 0. + * 'payload' : A union of all the possible payload structs + * + * PDSM Payload: + * + * The layout of the PDSM Payload is defined by various structs shared between + * papr_scm and libndctl so that contents of payload can be interpreted. As such + * its defined as a union of all possible payload structs as + * 'union nd_pdsm_payload'. Based on the value of 'nd_cmd_pkg.nd_command' + * appropriate member of the union is accessed. + */ + +/* Max payload size that we can handle */ +#define ND_PDSM_PAYLOAD_MAX_SIZE 184 + +/* Max payload size that we can handle */ +#define ND_PDSM_HDR_SIZE \ + (sizeof(struct nd_pkg_pdsm) - ND_PDSM_PAYLOAD_MAX_SIZE) + +/* Various nvdimm health indicators */ +#define PAPR_PDSM_DIMM_HEALTHY 0 +#define PAPR_PDSM_DIMM_UNHEALTHY 1 +#define PAPR_PDSM_DIMM_CRITICAL 2 +#define PAPR_PDSM_DIMM_FATAL 3 + +/* struct nd_papr_pdsm_health.extension_flags field flags */ + +/* Indicate that the 'dimm_fuel_gauge' field is valid */ +#define PDSM_DIMM_HEALTH_RUN_GAUGE_VALID 1 + +/* Indicate that the 'dimm_dsc' field is valid */ +#define PDSM_DIMM_DSC_VALID 2 + +/* + * Struct exchanged between kernel & ndctl in for PAPR_PDSM_HEALTH + * Various flags indicate the health status of the dimm. + * + * extension_flags : Any extension fields present in the struct. + * dimm_unarmed : Dimm not armed. So contents wont persist. + * dimm_bad_shutdown : Previous shutdown did not persist contents. + * dimm_bad_restore : Contents from previous shutdown werent restored. + * dimm_scrubbed : Contents of the dimm have been scrubbed. + * dimm_locked : Contents of the dimm cant be modified until CEC reboot + * dimm_encrypted : Contents of dimm are encrypted. + * dimm_health : Dimm health indicator. One of PAPR_PDSM_DIMM_XXXX + * dimm_fuel_gauge : Life remaining of DIMM as a percentage from 0-100 + */ +struct nd_papr_pdsm_health { + union { + struct { + __u32 extension_flags; + __u8 dimm_unarmed; + __u8 dimm_bad_shutdown; + __u8 dimm_bad_restore; + __u8 dimm_scrubbed; + __u8 dimm_locked; + __u8 dimm_encrypted; + __u16 dimm_health; + + /* Extension flag PDSM_DIMM_HEALTH_RUN_GAUGE_VALID */ + __u16 dimm_fuel_gauge; + + /* Extension flag PDSM_DIMM_DSC_VALID */ + __u64 dimm_dsc; + }; + __u8 buf[ND_PDSM_PAYLOAD_MAX_SIZE]; + }; +}; + +/* Flags for injecting specific smart errors */ +#define PDSM_SMART_INJECT_HEALTH_FATAL (1 << 0) +#define PDSM_SMART_INJECT_BAD_SHUTDOWN (1 << 1) + +struct nd_papr_pdsm_smart_inject { + union { + struct { + /* One or more of PDSM_SMART_INJECT_ */ + __u32 flags; + __u8 fatal_enable; + __u8 unsafe_shutdown_enable; + }; + __u8 buf[ND_PDSM_PAYLOAD_MAX_SIZE]; + }; +}; + +/* + * Methods to be embedded in ND_CMD_CALL request. These are sent to the kernel + * via 'nd_cmd_pkg.nd_command' member of the ioctl struct + */ +enum papr_pdsm { + PAPR_PDSM_MIN = 0x0, + PAPR_PDSM_HEALTH, + PAPR_PDSM_SMART_INJECT, + PAPR_PDSM_MAX, +}; + +/* Maximal union that can hold all possible payload types */ +union nd_pdsm_payload { + struct nd_papr_pdsm_health health; + struct nd_papr_pdsm_smart_inject smart_inject; + __u8 buf[ND_PDSM_PAYLOAD_MAX_SIZE]; +} __packed; + +/* + * PDSM-header + payload expected with ND_CMD_CALL ioctl from libnvdimm + * Valid member of union 'payload' is identified via 'nd_cmd_pkg.nd_command' + * that should always precede this struct when sent to papr_scm via CMD_CALL + * interface. + */ +struct nd_pkg_pdsm { + __s32 cmd_status; /* Out: Sub-cmd status returned back */ + __u16 reserved[2]; /* Ignored and to be set as '0' */ + union nd_pdsm_payload payload; +} __packed; + +#endif /* _UAPI_ASM_POWERPC_PAPR_PDSM_H_ */ diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index a39193213ff2..94c00996e633 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -1144,8 +1144,14 @@ #define PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH 0x0003ffff #define PCI_DOE_DATA_OBJECT_DISC_REQ_3_INDEX 0x000000ff +#define PCI_DOE_DATA_OBJECT_DISC_REQ_3_VER 0x0000ff00 #define PCI_DOE_DATA_OBJECT_DISC_RSP_3_VID 0x0000ffff #define PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL 0x00ff0000 #define PCI_DOE_DATA_OBJECT_DISC_RSP_3_NEXT_INDEX 0xff000000 +/* Compute Express Link (CXL r3.1, sec 8.1.5) */ +#define PCI_DVSEC_CXL_PORT 3 +#define PCI_DVSEC_CXL_PORT_CTL 0x0c +#define PCI_DVSEC_CXL_PORT_CTL_UNMASK_SBR 0x00000001 + #endif /* LINUX_PCI_REGS_H */ diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index 3a64499b0f5d..4842c36fdf80 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -1349,12 +1349,14 @@ union perf_mem_data_src { #define PERF_MEM_LVLNUM_L2 0x02 /* L2 */ #define PERF_MEM_LVLNUM_L3 0x03 /* L3 */ #define PERF_MEM_LVLNUM_L4 0x04 /* L4 */ -/* 5-0x7 available */ +#define PERF_MEM_LVLNUM_L2_MHB 0x05 /* L2 Miss Handling Buffer */ +#define PERF_MEM_LVLNUM_MSC 0x06 /* Memory-side Cache */ +/* 0x7 available */ #define PERF_MEM_LVLNUM_UNC 0x08 /* Uncached */ #define PERF_MEM_LVLNUM_CXL 0x09 /* CXL */ #define PERF_MEM_LVLNUM_IO 0x0a /* I/O */ #define PERF_MEM_LVLNUM_ANY_CACHE 0x0b /* Any cache */ -#define PERF_MEM_LVLNUM_LFB 0x0c /* LFB */ +#define PERF_MEM_LVLNUM_LFB 0x0c /* LFB / L1 Miss Handling Buffer */ #define PERF_MEM_LVLNUM_RAM 0x0d /* RAM */ #define PERF_MEM_LVLNUM_PMEM 0x0e /* PMEM */ #define PERF_MEM_LVLNUM_NA 0x0f /* N/A */ diff --git a/include/uapi/linux/pidfd.h b/include/uapi/linux/pidfd.h index 72ec000a97cd..565fc0629fff 100644 --- a/include/uapi/linux/pidfd.h +++ b/include/uapi/linux/pidfd.h @@ -5,6 +5,7 @@ #include <linux/types.h> #include <linux/fcntl.h> +#include <linux/ioctl.h> /* Flags for pidfd_open(). */ #define PIDFD_NONBLOCK O_NONBLOCK @@ -15,4 +16,17 @@ #define PIDFD_SIGNAL_THREAD_GROUP (1UL << 1) #define PIDFD_SIGNAL_PROCESS_GROUP (1UL << 2) +#define PIDFS_IOCTL_MAGIC 0xFF + +#define PIDFD_GET_CGROUP_NAMESPACE _IO(PIDFS_IOCTL_MAGIC, 1) +#define PIDFD_GET_IPC_NAMESPACE _IO(PIDFS_IOCTL_MAGIC, 2) +#define PIDFD_GET_MNT_NAMESPACE _IO(PIDFS_IOCTL_MAGIC, 3) +#define PIDFD_GET_NET_NAMESPACE _IO(PIDFS_IOCTL_MAGIC, 4) +#define PIDFD_GET_PID_NAMESPACE _IO(PIDFS_IOCTL_MAGIC, 5) +#define PIDFD_GET_PID_FOR_CHILDREN_NAMESPACE _IO(PIDFS_IOCTL_MAGIC, 6) +#define PIDFD_GET_TIME_NAMESPACE _IO(PIDFS_IOCTL_MAGIC, 7) +#define PIDFD_GET_TIME_FOR_CHILDREN_NAMESPACE _IO(PIDFS_IOCTL_MAGIC, 8) +#define PIDFD_GET_USER_NAMESPACE _IO(PIDFS_IOCTL_MAGIC, 9) +#define PIDFD_GET_UTS_NAMESPACE _IO(PIDFS_IOCTL_MAGIC, 10) + #endif /* _UAPI_LINUX_PIDFD_H */ diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h index ea277039f89d..d36d9cdf0c00 100644 --- a/include/uapi/linux/pkt_cls.h +++ b/include/uapi/linux/pkt_cls.h @@ -554,6 +554,9 @@ enum { TCA_FLOWER_KEY_SPI, /* be32 */ TCA_FLOWER_KEY_SPI_MASK, /* be32 */ + TCA_FLOWER_KEY_ENC_FLAGS, /* be32 */ + TCA_FLOWER_KEY_ENC_FLAGS_MASK, /* be32 */ + __TCA_FLOWER_MAX, }; @@ -587,6 +590,10 @@ enum { * TCA_FLOWER_KEY_ENC_OPT_GTP_ * attributes */ + TCA_FLOWER_KEY_ENC_OPTS_PFCP, /* Nested + * TCA_FLOWER_KEY_ENC_IPT_PFCP + * attributes + */ __TCA_FLOWER_KEY_ENC_OPTS_MAX, }; @@ -637,6 +644,16 @@ enum { (__TCA_FLOWER_KEY_ENC_OPT_GTP_MAX - 1) enum { + TCA_FLOWER_KEY_ENC_OPT_PFCP_UNSPEC, + TCA_FLOWER_KEY_ENC_OPT_PFCP_TYPE, /* u8 */ + TCA_FLOWER_KEY_ENC_OPT_PFCP_SEID, /* be64 */ + __TCA_FLOWER_KEY_ENC_OPT_PFCP_MAX, +}; + +#define TCA_FLOWER_KEY_ENC_OPT_PFCP_MAX \ + (__TCA_FLOWER_KEY_ENC_OPT_PFCP_MAX - 1) + +enum { TCA_FLOWER_KEY_MPLS_OPTS_UNSPEC, TCA_FLOWER_KEY_MPLS_OPTS_LSE, __TCA_FLOWER_KEY_MPLS_OPTS_MAX, @@ -660,8 +677,15 @@ enum { enum { TCA_FLOWER_KEY_FLAGS_IS_FRAGMENT = (1 << 0), TCA_FLOWER_KEY_FLAGS_FRAG_IS_FIRST = (1 << 1), + TCA_FLOWER_KEY_FLAGS_TUNNEL_CSUM = (1 << 2), + TCA_FLOWER_KEY_FLAGS_TUNNEL_DONT_FRAGMENT = (1 << 3), + TCA_FLOWER_KEY_FLAGS_TUNNEL_OAM = (1 << 4), + TCA_FLOWER_KEY_FLAGS_TUNNEL_CRIT_OPT = (1 << 5), + __TCA_FLOWER_KEY_FLAGS_MAX, }; +#define TCA_FLOWER_KEY_FLAGS_MAX (__TCA_FLOWER_KEY_FLAGS_MAX - 1) + enum { TCA_FLOWER_KEY_CFM_OPT_UNSPEC, TCA_FLOWER_KEY_CFM_MD_LEVEL, diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h index 370ed14b1ae0..35791791a879 100644 --- a/include/uapi/linux/prctl.h +++ b/include/uapi/linux/prctl.h @@ -306,4 +306,26 @@ struct prctl_mm_map { # define PR_RISCV_V_VSTATE_CTRL_NEXT_MASK 0xc # define PR_RISCV_V_VSTATE_CTRL_MASK 0x1f +#define PR_RISCV_SET_ICACHE_FLUSH_CTX 71 +# define PR_RISCV_CTX_SW_FENCEI_ON 0 +# define PR_RISCV_CTX_SW_FENCEI_OFF 1 +# define PR_RISCV_SCOPE_PER_PROCESS 0 +# define PR_RISCV_SCOPE_PER_THREAD 1 + +/* PowerPC Dynamic Execution Control Register (DEXCR) controls */ +#define PR_PPC_GET_DEXCR 72 +#define PR_PPC_SET_DEXCR 73 +/* DEXCR aspect to act on */ +# define PR_PPC_DEXCR_SBHE 0 /* Speculative branch hint enable */ +# define PR_PPC_DEXCR_IBRTPD 1 /* Indirect branch recurrent target prediction disable */ +# define PR_PPC_DEXCR_SRAPD 2 /* Subroutine return address prediction disable */ +# define PR_PPC_DEXCR_NPHIE 3 /* Non-privileged hash instruction enable */ +/* Action to apply / return */ +# define PR_PPC_DEXCR_CTRL_EDITABLE 0x1 /* Aspect can be modified with PR_PPC_SET_DEXCR */ +# define PR_PPC_DEXCR_CTRL_SET 0x2 /* Set the aspect for this process */ +# define PR_PPC_DEXCR_CTRL_CLEAR 0x4 /* Clear the aspect for this process */ +# define PR_PPC_DEXCR_CTRL_SET_ONEXEC 0x8 /* Set the aspect on exec */ +# define PR_PPC_DEXCR_CTRL_CLEAR_ONEXEC 0x10 /* Clear the aspect on exec */ +# define PR_PPC_DEXCR_CTRL_MASK 0x1f + #endif /* _LINUX_PRCTL_H */ diff --git a/include/uapi/linux/psample.h b/include/uapi/linux/psample.h index e585db5bf2d2..b765f0e81f20 100644 --- a/include/uapi/linux/psample.h +++ b/include/uapi/linux/psample.h @@ -8,7 +8,11 @@ enum { PSAMPLE_ATTR_ORIGSIZE, PSAMPLE_ATTR_SAMPLE_GROUP, PSAMPLE_ATTR_GROUP_SEQ, - PSAMPLE_ATTR_SAMPLE_RATE, + PSAMPLE_ATTR_SAMPLE_RATE, /* u32, ratio between observed and + * sampled packets or scaled probability + * if PSAMPLE_ATTR_SAMPLE_PROBABILITY + * is set. + */ PSAMPLE_ATTR_DATA, PSAMPLE_ATTR_GROUP_REFCOUNT, PSAMPLE_ATTR_TUNNEL, @@ -19,6 +23,11 @@ enum { PSAMPLE_ATTR_LATENCY, /* u64, nanoseconds */ PSAMPLE_ATTR_TIMESTAMP, /* u64, nanoseconds */ PSAMPLE_ATTR_PROTO, /* u16 */ + PSAMPLE_ATTR_USER_COOKIE, /* binary, user provided data */ + PSAMPLE_ATTR_SAMPLE_PROBABILITY,/* no argument, interpret rate in + * PSAMPLE_ATTR_SAMPLE_RATE as a + * probability scaled 0 - U32_MAX. + */ __PSAMPLE_ATTR_MAX }; diff --git a/include/uapi/linux/psp-sev.h b/include/uapi/linux/psp-sev.h index b7a2c2ee35b7..2289b7c76c59 100644 --- a/include/uapi/linux/psp-sev.h +++ b/include/uapi/linux/psp-sev.h @@ -31,6 +31,7 @@ enum { SNP_PLATFORM_STATUS, SNP_COMMIT, SNP_SET_CONFIG, + SNP_VLEK_LOAD, SEV_MAX, }; @@ -215,6 +216,32 @@ struct sev_user_data_snp_config { } __packed; /** + * struct sev_data_snp_vlek_load - SNP_VLEK_LOAD structure + * + * @len: length of the command buffer read by the PSP + * @vlek_wrapped_version: version of wrapped VLEK hashstick (Must be 0h) + * @rsvd: reserved + * @vlek_wrapped_address: address of a wrapped VLEK hashstick + * (struct sev_user_data_snp_wrapped_vlek_hashstick) + */ +struct sev_user_data_snp_vlek_load { + __u32 len; /* In */ + __u8 vlek_wrapped_version; /* In */ + __u8 rsvd[3]; /* In */ + __u64 vlek_wrapped_address; /* In */ +} __packed; + +/** + * struct sev_user_data_snp_vlek_wrapped_vlek_hashstick - Wrapped VLEK data + * + * @data: Opaque data provided by AMD KDS (as described in SEV-SNP Firmware ABI + * 1.54, SNP_VLEK_LOAD) + */ +struct sev_user_data_snp_wrapped_vlek_hashstick { + __u8 data[432]; /* In */ +} __packed; + +/** * struct sev_issue_cmd - SEV ioctl parameters * * @cmd: SEV commands to execute diff --git a/include/uapi/linux/random.h b/include/uapi/linux/random.h index e744c23582eb..1dd047ec98a1 100644 --- a/include/uapi/linux/random.h +++ b/include/uapi/linux/random.h @@ -20,7 +20,7 @@ /* Add to (or subtract from) the entropy count. (Superuser only.) */ #define RNDADDTOENTCNT _IOW( 'R', 0x01, int ) -/* Get the contents of the entropy pool. (Superuser only.) */ +/* Get the contents of the entropy pool. (Superuser only.) (Removed in 2.6.9-rc2.) */ #define RNDGETPOOL _IOR( 'R', 0x02, int [2] ) /* @@ -55,4 +55,19 @@ struct rand_pool_info { #define GRND_RANDOM 0x0002 #define GRND_INSECURE 0x0004 +/** + * struct vgetrandom_opaque_params - arguments for allocating memory for vgetrandom + * + * @size_per_opaque_state: Size of each state that is to be passed to vgetrandom(). + * @mmap_prot: Value of the prot argument in mmap(2). + * @mmap_flags: Value of the flags argument in mmap(2). + * @reserved: Reserved for future use. + */ +struct vgetrandom_opaque_params { + __u32 size_of_opaque_state; + __u32 mmap_prot; + __u32 mmap_flags; + __u32 reserved[13]; +}; + #endif /* _UAPI_LINUX_RANDOM_H */ diff --git a/include/uapi/linux/sev-guest.h b/include/uapi/linux/sev-guest.h index 154a87a1eca9..fcdfea767fca 100644 --- a/include/uapi/linux/sev-guest.h +++ b/include/uapi/linux/sev-guest.h @@ -89,6 +89,9 @@ struct snp_ext_report_req { #define SNP_GUEST_FW_ERR_MASK GENMASK_ULL(31, 0) #define SNP_GUEST_VMM_ERR_SHIFT 32 #define SNP_GUEST_VMM_ERR(x) (((u64)x) << SNP_GUEST_VMM_ERR_SHIFT) +#define SNP_GUEST_FW_ERR(x) ((x) & SNP_GUEST_FW_ERR_MASK) +#define SNP_GUEST_ERR(vmm_err, fw_err) (SNP_GUEST_VMM_ERR(vmm_err) | \ + SNP_GUEST_FW_ERR(fw_err)) #define SNP_GUEST_VMM_ERR_INVALID_LEN 1 #define SNP_GUEST_VMM_ERR_BUSY 2 diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h index a0819c6a5988..adf5fd78dd50 100644 --- a/include/uapi/linux/snmp.h +++ b/include/uapi/linux/snmp.h @@ -337,6 +337,8 @@ enum LINUX_MIB_XFRMFWDHDRERROR, /* XfrmFwdHdrError*/ LINUX_MIB_XFRMOUTSTATEINVALID, /* XfrmOutStateInvalid */ LINUX_MIB_XFRMACQUIREERROR, /* XfrmAcquireError */ + LINUX_MIB_XFRMOUTSTATEDIRERROR, /* XfrmOutStateDirError */ + LINUX_MIB_XFRMINSTATEDIRERROR, /* XfrmInStateDirError */ __LINUX_MIB_XFRMMAX }; diff --git a/include/uapi/linux/stat.h b/include/uapi/linux/stat.h index 2f2ee82d5517..887a25286441 100644 --- a/include/uapi/linux/stat.h +++ b/include/uapi/linux/stat.h @@ -127,7 +127,14 @@ struct statx { __u32 stx_dio_mem_align; /* Memory buffer alignment for direct I/O */ __u32 stx_dio_offset_align; /* File offset alignment for direct I/O */ /* 0xa0 */ - __u64 __spare3[12]; /* Spare space for future expansion */ + __u64 stx_subvol; /* Subvolume identifier */ + __u32 stx_atomic_write_unit_min; /* Min atomic write unit in bytes */ + __u32 stx_atomic_write_unit_max; /* Max atomic write unit in bytes */ + /* 0xb0 */ + __u32 stx_atomic_write_segments_max; /* Max atomic write segment count */ + __u32 __spare1[1]; + /* 0xb8 */ + __u64 __spare3[9]; /* Spare space for future expansion */ /* 0x100 */ }; @@ -155,6 +162,8 @@ struct statx { #define STATX_MNT_ID 0x00001000U /* Got stx_mnt_id */ #define STATX_DIOALIGN 0x00002000U /* Want/got direct I/O alignment info */ #define STATX_MNT_ID_UNIQUE 0x00004000U /* Want/got extended stx_mount_id */ +#define STATX_SUBVOL 0x00008000U /* Want/got stx_subvol */ +#define STATX_WRITE_ATOMIC 0x00010000U /* Want/got atomic_write_* fields */ #define STATX__RESERVED 0x80000000U /* Reserved for future struct statx expansion */ @@ -190,6 +199,7 @@ struct statx { #define STATX_ATTR_MOUNT_ROOT 0x00002000 /* Root of a mount */ #define STATX_ATTR_VERITY 0x00100000 /* [I] Verity protected file */ #define STATX_ATTR_DAX 0x00200000 /* File is currently in DAX state */ +#define STATX_ATTR_WRITE_ATOMIC 0x00400000 /* File supports atomic write operations */ #endif /* _UAPI_LINUX_STAT_H */ diff --git a/include/uapi/linux/stddef.h b/include/uapi/linux/stddef.h index 2ec6f35cda32..58154117d9b0 100644 --- a/include/uapi/linux/stddef.h +++ b/include/uapi/linux/stddef.h @@ -55,4 +55,12 @@ #define __counted_by(m) #endif +#ifndef __counted_by_le +#define __counted_by_le(m) +#endif + +#ifndef __counted_by_be +#define __counted_by_be(m) +#endif + #endif /* _UAPI_LINUX_STDDEF_H */ diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index c07e9f90c084..dbf896f3146c 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -135,6 +135,8 @@ enum { #define TCP_AO_GET_KEYS 41 /* List MKT(s) */ #define TCP_AO_REPAIR 42 /* Get/Set SNEs and ISNs */ +#define TCP_IS_MPTCP 43 /* Is MPTCP being used? */ + #define TCP_REPAIR_ON 1 #define TCP_REPAIR_OFF 0 #define TCP_REPAIR_OFF_NO_WP -1 /* Turn off without window probes */ diff --git a/include/uapi/linux/tcp_metrics.h b/include/uapi/linux/tcp_metrics.h index 7cb4a172feed..927c735a5b0e 100644 --- a/include/uapi/linux/tcp_metrics.h +++ b/include/uapi/linux/tcp_metrics.h @@ -1,8 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* tcp_metrics.h - TCP Metrics Interface */ -#ifndef _LINUX_TCP_METRICS_H -#define _LINUX_TCP_METRICS_H +#ifndef _UAPI_LINUX_TCP_METRICS_H +#define _UAPI_LINUX_TCP_METRICS_H #include <linux/types.h> @@ -27,6 +27,22 @@ enum tcp_metric_index { #define TCP_METRIC_MAX (__TCP_METRIC_MAX - 1) +/* Re-define enum tcp_metric_index, again, using the values carried + * as netlink attribute types. + */ +enum { + TCP_METRICS_A_METRICS_RTT = 1, + TCP_METRICS_A_METRICS_RTTVAR, + TCP_METRICS_A_METRICS_SSTHRESH, + TCP_METRICS_A_METRICS_CWND, + TCP_METRICS_A_METRICS_REODERING, + TCP_METRICS_A_METRICS_RTT_US, + TCP_METRICS_A_METRICS_RTTVAR_US, + + __TCP_METRICS_A_METRICS_MAX +}; +#define TCP_METRICS_A_METRICS_MAX (__TCP_METRICS_A_METRICS_MAX - 1) + enum { TCP_METRICS_ATTR_UNSPEC, TCP_METRICS_ATTR_ADDR_IPV4, /* u32 */ @@ -58,4 +74,4 @@ enum { #define TCP_METRICS_CMD_MAX (__TCP_METRICS_CMD_MAX - 1) -#endif /* _LINUX_TCP_METRICS_H */ +#endif /* _UAPI_LINUX_TCP_METRICS_H */ diff --git a/include/uapi/linux/tee.h b/include/uapi/linux/tee.h index 23e57164693c..d0430bee8292 100644 --- a/include/uapi/linux/tee.h +++ b/include/uapi/linux/tee.h @@ -56,6 +56,7 @@ */ #define TEE_IMPL_ID_OPTEE 1 #define TEE_IMPL_ID_AMDTEE 2 +#define TEE_IMPL_ID_TSTEE 3 /* * OP-TEE specific capabilities diff --git a/include/uapi/linux/trace_mmap.h b/include/uapi/linux/trace_mmap.h new file mode 100644 index 000000000000..c102ef35d11e --- /dev/null +++ b/include/uapi/linux/trace_mmap.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _TRACE_MMAP_H_ +#define _TRACE_MMAP_H_ + +#include <linux/types.h> + +/** + * struct trace_buffer_meta - Ring-buffer Meta-page description + * @meta_page_size: Size of this meta-page. + * @meta_struct_len: Size of this structure. + * @subbuf_size: Size of each sub-buffer. + * @nr_subbufs: Number of subbfs in the ring-buffer, including the reader. + * @reader.lost_events: Number of events lost at the time of the reader swap. + * @reader.id: subbuf ID of the current reader. ID range [0 : @nr_subbufs - 1] + * @reader.read: Number of bytes read on the reader subbuf. + * @flags: Placeholder for now, 0 until new features are supported. + * @entries: Number of entries in the ring-buffer. + * @overrun: Number of entries lost in the ring-buffer. + * @read: Number of entries that have been read. + * @Reserved1: Internal use only. + * @Reserved2: Internal use only. + */ +struct trace_buffer_meta { + __u32 meta_page_size; + __u32 meta_struct_len; + + __u32 subbuf_size; + __u32 nr_subbufs; + + struct { + __u64 lost_events; + __u32 id; + __u32 read; + } reader; + + __u64 flags; + + __u64 entries; + __u64 overrun; + __u64 read; + + __u64 Reserved1; + __u64 Reserved2; +}; + +#define TRACE_MMAP_IOCTL_GET_READER _IO('R', 0x20) + +#endif /* _TRACE_MMAP_H_ */ diff --git a/include/uapi/linux/udp.h b/include/uapi/linux/udp.h index 4828794efcf8..1a0fe8b151fb 100644 --- a/include/uapi/linux/udp.h +++ b/include/uapi/linux/udp.h @@ -36,7 +36,7 @@ struct udphdr { #define UDP_GRO 104 /* This socket can receive UDP GRO packets */ /* UDP encapsulation types */ -#define UDP_ENCAP_ESPINUDP_NON_IKE 1 /* draft-ietf-ipsec-nat-t-ike-00/01 */ +#define UDP_ENCAP_ESPINUDP_NON_IKE 1 /* unused draft-ietf-ipsec-nat-t-ike-00/01 */ #define UDP_ENCAP_ESPINUDP 2 /* draft-ietf-ipsec-udp-encaps-06 */ #define UDP_ENCAP_L2TPINUDP 3 /* rfc2661 */ #define UDP_ENCAP_GTP0 4 /* GSM TS 09.60 */ diff --git a/include/uapi/linux/um_timetravel.h b/include/uapi/linux/um_timetravel.h index ca3238222b6d..546a690b0346 100644 --- a/include/uapi/linux/um_timetravel.h +++ b/include/uapi/linux/um_timetravel.h @@ -1,17 +1,6 @@ +/* SPDX-License-Identifier: BSD-3-Clause */ /* - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - * Copyright (C) 2019 Intel Corporation + * Copyright (C) 2019 - 2023 Intel Corporation */ #ifndef _UAPI_LINUX_UM_TIMETRAVEL_H #define _UAPI_LINUX_UM_TIMETRAVEL_H @@ -50,6 +39,36 @@ struct um_timetravel_msg { __u64 time; }; +/* max number of file descriptors that can be sent/received in a message */ +#define UM_TIMETRAVEL_MAX_FDS 2 + +/** + * enum um_timetravel_shared_mem_fds - fds sent in ACK message for START message + */ +enum um_timetravel_shared_mem_fds { + /** + * @UM_TIMETRAVEL_SHARED_MEMFD: Index of the shared memory file + * descriptor in the control message + */ + UM_TIMETRAVEL_SHARED_MEMFD, + /** + * @UM_TIMETRAVEL_SHARED_LOGFD: Index of the logging file descriptor + * in the control message + */ + UM_TIMETRAVEL_SHARED_LOGFD, + UM_TIMETRAVEL_SHARED_MAX_FDS, +}; + +/** + * enum um_timetravel_start_ack - ack-time mask for start message + */ +enum um_timetravel_start_ack { + /** + * @UM_TIMETRAVEL_START_ACK_ID: client ID that controller allocated. + */ + UM_TIMETRAVEL_START_ACK_ID = 0xffff, +}; + /** * enum um_timetravel_ops - Operation codes */ @@ -57,7 +76,9 @@ enum um_timetravel_ops { /** * @UM_TIMETRAVEL_ACK: response (ACK) to any previous message, * this usually doesn't carry any data in the 'time' field - * unless otherwise specified below + * unless otherwise specified below, note: while using shared + * memory no ACK for WAIT and RUN messages, for more info see + * &struct um_timetravel_schedshm. */ UM_TIMETRAVEL_ACK = 0, @@ -123,6 +144,147 @@ enum um_timetravel_ops { * the simulation. */ UM_TIMETRAVEL_GET_TOD = 8, + + /** + * @UM_TIMETRAVEL_BROADCAST: Send/Receive a broadcast message. + * This message can be used to sync all components in the system + * with a single message, if the calender gets the message, the + * calender broadcast the message to all components, and if a + * component receives it it should act based on it e.g print a + * message to it's log system. + * (calendar <-> host) + */ + UM_TIMETRAVEL_BROADCAST = 9, +}; + +/* version of struct um_timetravel_schedshm */ +#define UM_TIMETRAVEL_SCHEDSHM_VERSION 2 + +/** + * enum um_timetravel_schedshm_cap - time travel capabilities of every client + * + * These flags must be set immediately after processing the ACK to + * the START message, before sending any message to the controller. + */ +enum um_timetravel_schedshm_cap { + /** + * @UM_TIMETRAVEL_SCHEDSHM_CAP_TIME_SHARE: client can read current time + * update internal time request to shared memory and read + * free until and send no Ack on RUN and doesn't expect ACK on + * WAIT. + */ + UM_TIMETRAVEL_SCHEDSHM_CAP_TIME_SHARE = 0x1, +}; + +/** + * enum um_timetravel_schedshm_flags - time travel flags of every client + */ +enum um_timetravel_schedshm_flags { + /** + * @UM_TIMETRAVEL_SCHEDSHM_FLAGS_REQ_RUN: client has a request to run. + * It's set by client when it has a request to run, if (and only + * if) the @running_id points to a client that is able to use + * shared memory, i.e. has %UM_TIMETRAVEL_SCHEDSHM_CAP_TIME_SHARE + * (this includes the client itself). Otherwise, a message must + * be used. + */ + UM_TIMETRAVEL_SCHEDSHM_FLAGS_REQ_RUN = 0x1, +}; + +/** + * DOC: Time travel shared memory overview + * + * The main purpose of the shared memory is to avoid all time travel message + * that don't need any action, for example current time can be held in shared + * memory without the need of any client to send a message UM_TIMETRAVEL_GET + * in order to know what's the time. + * + * Since this is shared memory with all clients and controller and controller + * creates the shared memory space, all time values are absolute to controller + * time. So first time client connects to shared memory mode it should take the + * current_time value in shared memory and keep it internally as a diff to + * shared memory times, and once shared memory is initialized, any interaction + * with the controller must happen in the controller time domain, including any + * messages (for clients that are not using shared memory, the controller will + * handle an offset and make the clients think they start at time zero.) + * + * Along with the shared memory file descriptor is sent to the client a logging + * file descriptor, to have all logs related to shared memory, + * logged into one place. note: to have all logs synced into log file at write, + * file should be flushed (fflush) after writing to it. + * + * To avoid memory corruption, we define below for each field who can write to + * it at what time, defined in the structure fields. + * + * To avoid having to pack this struct, all fields in it must be naturally aligned + * (i.e. aligned to their size). + */ + +/** + * union um_timetravel_schedshm_client - UM time travel client struct + * + * Every entity using the shared memory including the controller has a place in + * the um_timetravel_schedshm clients array, that holds info related to the client + * using the shared memory, and can be set only by the client after it gets the + * fd memory. + * + * @capa: bit fields with client capabilities see + * &enum um_timetravel_schedshm_cap, set by client once after getting the + * shared memory file descriptor. + * @flags: bit fields for flags see &enum um_timetravel_schedshm_flags for doc. + * @req_time: request time to run, set by client on every request it needs. + * @name: unique id sent to the controller by client with START message. + */ +union um_timetravel_schedshm_client { + struct { + __u32 capa; + __u32 flags; + __u64 req_time; + __u64 name; + }; + char reserve[128]; /* reserved for future usage */ }; +/** + * struct um_timetravel_schedshm - UM time travel shared memory struct + * + * @hdr: header fields: + * @version: Current version struct UM_TIMETRAVEL_SCHEDSHM_VERSION, + * set by controller once at init, clients must check this after mapping + * and work without shared memory if they cannot handle the indicated + * version. + * @len: Length of all the memory including header (@hdr), clients should once + * per connection first mmap the header and take the length (@len) to remap the entire size. + * This is done in order to support dynamic struct size letting number of + * clients be dynamic based on controller support. + * @free_until: Stores the next request to run by any client, in order for the + * current client to know how long it can still run. A client needs to (at + * least) reload this value immediately after communicating with any other + * client, since the controller will update this field when a new request + * is made by any client. Clients also must update this value when they + * insert/update an own request into the shared memory while not running + * themselves, and the new request is before than the current value. + * current_time: Current time, can only be set by the client in running state + * (indicated by @running_id), though that client may only run until @free_until, + * so it must remain smaller than @free_until. + * @running_id: The current client in state running, set before a client is + * notified that it's now running. + * @max_clients: size of @clients array, set once at init by the controller. + * @clients: clients array see &union um_timetravel_schedshm_client for doc, + * set only by client. + */ +struct um_timetravel_schedshm { + union { + struct { + __u32 version; + __u32 len; + __u64 free_until; + __u64 current_time; + __u16 running_id; + __u16 max_clients; + }; + char hdr[4096]; /* align to 4K page size */ + }; + union um_timetravel_schedshm_client clients[]; +}; #endif /* _UAPI_LINUX_UM_TIMETRAVEL_H */ diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 99c3f5e99da7..974fd254e573 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -898,6 +898,8 @@ enum v4l2_mpeg_video_av1_level { V4L2_MPEG_VIDEO_AV1_LEVEL_7_3 = 23 }; +#define V4L2_CID_MPEG_VIDEO_AVERAGE_QP (V4L2_CID_CODEC_BASE + 657) + /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ #define V4L2_CID_CODEC_CX2341X_BASE (V4L2_CTRL_CLASS_CODEC | 0x1000) #define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_CODEC_CX2341X_BASE+0) diff --git a/include/uapi/linux/v4l2-mediabus.h b/include/uapi/linux/v4l2-mediabus.h index 6b07b73473b5..946520bc49f1 100644 --- a/include/uapi/linux/v4l2-mediabus.h +++ b/include/uapi/linux/v4l2-mediabus.h @@ -19,12 +19,18 @@ * @width: image width * @height: image height * @code: data format code (from enum v4l2_mbus_pixelcode) - * @field: used interlacing type (from enum v4l2_field) - * @colorspace: colorspace of the data (from enum v4l2_colorspace) - * @ycbcr_enc: YCbCr encoding of the data (from enum v4l2_ycbcr_encoding) - * @hsv_enc: HSV encoding of the data (from enum v4l2_hsv_encoding) - * @quantization: quantization of the data (from enum v4l2_quantization) - * @xfer_func: transfer function of the data (from enum v4l2_xfer_func) + * @field: used interlacing type (from enum v4l2_field), zero for metadata + * mbus codes + * @colorspace: colorspace of the data (from enum v4l2_colorspace), zero on + * metadata mbus codes + * @ycbcr_enc: YCbCr encoding of the data (from enum v4l2_ycbcr_encoding), zero + * for metadata mbus codes + * @hsv_enc: HSV encoding of the data (from enum v4l2_hsv_encoding), zero for + * metadata mbus codes + * @quantization: quantization of the data (from enum v4l2_quantization), zero + * for metadata mbus codes + * @xfer_func: transfer function of the data (from enum v4l2_xfer_func), zero + * for metadata mbus codes * @flags: flags (V4L2_MBUS_FRAMEFMT_*) * @reserved: reserved bytes that can be later used */ diff --git a/include/uapi/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h index 7048c51581c6..2347e266cf75 100644 --- a/include/uapi/linux/v4l2-subdev.h +++ b/include/uapi/linux/v4l2-subdev.h @@ -50,6 +50,10 @@ struct v4l2_subdev_format { * @rect: pad crop rectangle boundaries * @stream: stream number, defined in subdev routing * @reserved: drivers and applications must zero this array + * + * The subdev crop API is an obsolete interface and may be removed in the + * future. It is superseded by the selection API. No new extensions to this + * structure will be accepted. */ struct v4l2_subdev_crop { __u32 which; @@ -224,15 +228,19 @@ struct v4l2_subdev_route { * struct v4l2_subdev_routing - Subdev routing information * * @which: configuration type (from enum v4l2_subdev_format_whence) - * @num_routes: the total number of routes in the routes array + * @len_routes: the length of the routes array, in routes; set by the user, not + * modified by the kernel * @routes: pointer to the routes array + * @num_routes: the total number of routes, possibly more than fits in the + * routes array * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_routing { __u32 which; - __u32 num_routes; + __u32 len_routes; __u64 routes; - __u32 reserved[6]; + __u32 num_routes; + __u32 reserved[11]; }; /* diff --git a/include/uapi/linux/vdpa.h b/include/uapi/linux/vdpa.h index 43c51698195c..842bf1201ac4 100644 --- a/include/uapi/linux/vdpa.h +++ b/include/uapi/linux/vdpa.h @@ -57,7 +57,7 @@ enum vdpa_attr { VDPA_ATTR_DEV_FEATURES, /* u64 */ VDPA_ATTR_DEV_BLK_CFG_CAPACITY, /* u64 */ - VDPA_ATTR_DEV_BLK_CFG_SEG_SIZE, /* u32 */ + VDPA_ATTR_DEV_BLK_CFG_SIZE_MAX, /* u32 */ VDPA_ATTR_DEV_BLK_CFG_BLK_SIZE, /* u32 */ VDPA_ATTR_DEV_BLK_CFG_SEG_MAX, /* u32 */ VDPA_ATTR_DEV_BLK_CFG_NUM_QUEUES, /* u16 */ @@ -70,8 +70,8 @@ enum vdpa_attr { VDPA_ATTR_DEV_BLK_CFG_DISCARD_SEC_ALIGN,/* u32 */ VDPA_ATTR_DEV_BLK_CFG_MAX_WRITE_ZEROES_SEC, /* u32 */ VDPA_ATTR_DEV_BLK_CFG_MAX_WRITE_ZEROES_SEG, /* u32 */ - VDPA_ATTR_DEV_BLK_CFG_READ_ONLY, /* u8 */ - VDPA_ATTR_DEV_BLK_CFG_FLUSH, /* u8 */ + VDPA_ATTR_DEV_BLK_READ_ONLY, /* u8 */ + VDPA_ATTR_DEV_BLK_FLUSH, /* u8 */ /* new attributes must be added above here */ VDPA_ATTR_MAX, diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h index bea697390613..b95dd84eef2d 100644 --- a/include/uapi/linux/vhost.h +++ b/include/uapi/linux/vhost.h @@ -179,12 +179,6 @@ /* Get the config size */ #define VHOST_VDPA_GET_CONFIG_SIZE _IOR(VHOST_VIRTIO, 0x79, __u32) -/* Get the count of all virtqueues */ -#define VHOST_VDPA_GET_VQS_COUNT _IOR(VHOST_VIRTIO, 0x80, __u32) - -/* Get the number of virtqueue groups. */ -#define VHOST_VDPA_GET_GROUP_NUM _IOR(VHOST_VIRTIO, 0x81, __u32) - /* Get the number of address spaces. */ #define VHOST_VDPA_GET_AS_NUM _IOR(VHOST_VIRTIO, 0x7A, unsigned int) @@ -228,10 +222,17 @@ #define VHOST_VDPA_GET_VRING_DESC_GROUP _IOWR(VHOST_VIRTIO, 0x7F, \ struct vhost_vring_state) + +/* Get the count of all virtqueues */ +#define VHOST_VDPA_GET_VQS_COUNT _IOR(VHOST_VIRTIO, 0x80, __u32) + +/* Get the number of virtqueue groups. */ +#define VHOST_VDPA_GET_GROUP_NUM _IOR(VHOST_VIRTIO, 0x81, __u32) + /* Get the queue size of a specific virtqueue. * userspace set the vring index in vhost_vring_state.index * kernel set the queue size in vhost_vring_state.num */ -#define VHOST_VDPA_GET_VRING_SIZE _IOWR(VHOST_VIRTIO, 0x80, \ +#define VHOST_VDPA_GET_VRING_SIZE _IOWR(VHOST_VIRTIO, 0x82, \ struct vhost_vring_state) #endif diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index a8015e5e7fa4..4e91362da6da 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -582,6 +582,8 @@ struct v4l2_pix_format { /* RGB formats (6 or 8 bytes per pixel) */ #define V4L2_PIX_FMT_BGR48_12 v4l2_fourcc('B', '3', '1', '2') /* 48 BGR 12-bit per component */ +#define V4L2_PIX_FMT_BGR48 v4l2_fourcc('B', 'G', 'R', '6') /* 48 BGR 16-bit per component */ +#define V4L2_PIX_FMT_RGB48 v4l2_fourcc('R', 'G', 'B', '6') /* 48 RGB 16-bit per component */ #define V4L2_PIX_FMT_ABGR64_12 v4l2_fourcc('B', '4', '1', '2') /* 64 BGRA 12-bit per component */ /* Grey formats */ @@ -599,6 +601,8 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_Y10BPACK v4l2_fourcc('Y', '1', '0', 'B') /* 10 Greyscale bit-packed */ #define V4L2_PIX_FMT_Y10P v4l2_fourcc('Y', '1', '0', 'P') /* 10 Greyscale, MIPI RAW10 packed */ #define V4L2_PIX_FMT_IPU3_Y10 v4l2_fourcc('i', 'p', '3', 'y') /* IPU3 packed 10-bit greyscale */ +#define V4L2_PIX_FMT_Y12P v4l2_fourcc('Y', '1', '2', 'P') /* 12 Greyscale, MIPI RAW12 packed */ +#define V4L2_PIX_FMT_Y14P v4l2_fourcc('Y', '1', '4', 'P') /* 14 Greyscale, MIPI RAW14 packed */ /* Palette formats */ #define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P', 'A', 'L', '8') /* 8 8-bit palette */ @@ -812,6 +816,18 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_IPU3_SGRBG10 v4l2_fourcc('i', 'p', '3', 'G') /* IPU3 packed 10-bit GRBG bayer */ #define V4L2_PIX_FMT_IPU3_SRGGB10 v4l2_fourcc('i', 'p', '3', 'r') /* IPU3 packed 10-bit RGGB bayer */ +/* Raspberry Pi PiSP compressed formats. */ +#define V4L2_PIX_FMT_PISP_COMP1_RGGB v4l2_fourcc('P', 'C', '1', 'R') /* PiSP 8-bit mode 1 compressed RGGB bayer */ +#define V4L2_PIX_FMT_PISP_COMP1_GRBG v4l2_fourcc('P', 'C', '1', 'G') /* PiSP 8-bit mode 1 compressed GRBG bayer */ +#define V4L2_PIX_FMT_PISP_COMP1_GBRG v4l2_fourcc('P', 'C', '1', 'g') /* PiSP 8-bit mode 1 compressed GBRG bayer */ +#define V4L2_PIX_FMT_PISP_COMP1_BGGR v4l2_fourcc('P', 'C', '1', 'B') /* PiSP 8-bit mode 1 compressed BGGR bayer */ +#define V4L2_PIX_FMT_PISP_COMP1_MONO v4l2_fourcc('P', 'C', '1', 'M') /* PiSP 8-bit mode 1 compressed monochrome */ +#define V4L2_PIX_FMT_PISP_COMP2_RGGB v4l2_fourcc('P', 'C', '2', 'R') /* PiSP 8-bit mode 2 compressed RGGB bayer */ +#define V4L2_PIX_FMT_PISP_COMP2_GRBG v4l2_fourcc('P', 'C', '2', 'G') /* PiSP 8-bit mode 2 compressed GRBG bayer */ +#define V4L2_PIX_FMT_PISP_COMP2_GBRG v4l2_fourcc('P', 'C', '2', 'g') /* PiSP 8-bit mode 2 compressed GBRG bayer */ +#define V4L2_PIX_FMT_PISP_COMP2_BGGR v4l2_fourcc('P', 'C', '2', 'B') /* PiSP 8-bit mode 2 compressed BGGR bayer */ +#define V4L2_PIX_FMT_PISP_COMP2_MONO v4l2_fourcc('P', 'C', '2', 'M') /* PiSP 8-bit mode 2 compressed monochrome */ + /* SDR formats - used only for Software Defined Radio devices */ #define V4L2_SDR_FMT_CU8 v4l2_fourcc('C', 'U', '0', '8') /* IQ u8 */ #define V4L2_SDR_FMT_CU16LE v4l2_fourcc('C', 'U', '1', '6') /* IQ u16le */ @@ -839,6 +855,23 @@ struct v4l2_pix_format { #define V4L2_META_FMT_RK_ISP1_PARAMS v4l2_fourcc('R', 'K', '1', 'P') /* Rockchip ISP1 3A Parameters */ #define V4L2_META_FMT_RK_ISP1_STAT_3A v4l2_fourcc('R', 'K', '1', 'S') /* Rockchip ISP1 3A Statistics */ +/* Vendor specific - used for RaspberryPi PiSP */ +#define V4L2_META_FMT_RPI_BE_CFG v4l2_fourcc('R', 'P', 'B', 'C') /* PiSP BE configuration */ + +#ifdef __KERNEL__ +/* + * Line-based metadata formats. Remember to update v4l_fill_fmtdesc() when + * adding new ones! + */ +#define V4L2_META_FMT_GENERIC_8 v4l2_fourcc('M', 'E', 'T', '8') /* Generic 8-bit metadata */ +#define V4L2_META_FMT_GENERIC_CSI2_10 v4l2_fourcc('M', 'C', '1', 'A') /* 10-bit CSI-2 packed 8-bit metadata */ +#define V4L2_META_FMT_GENERIC_CSI2_12 v4l2_fourcc('M', 'C', '1', 'C') /* 12-bit CSI-2 packed 8-bit metadata */ +#define V4L2_META_FMT_GENERIC_CSI2_14 v4l2_fourcc('M', 'C', '1', 'E') /* 14-bit CSI-2 packed 8-bit metadata */ +#define V4L2_META_FMT_GENERIC_CSI2_16 v4l2_fourcc('M', 'C', '1', 'G') /* 16-bit CSI-2 packed 8-bit metadata */ +#define V4L2_META_FMT_GENERIC_CSI2_20 v4l2_fourcc('M', 'C', '1', 'K') /* 20-bit CSI-2 packed 8-bit metadata */ +#define V4L2_META_FMT_GENERIC_CSI2_24 v4l2_fourcc('M', 'C', '1', 'O') /* 24-bit CSI-2 packed 8-bit metadata */ +#endif + /* priv field value to indicates that subsequent fields are valid. */ #define V4L2_PIX_FMT_PRIV_MAGIC 0xfeedcafe @@ -869,6 +902,7 @@ struct v4l2_fmtdesc { #define V4L2_FMT_FLAG_CSC_YCBCR_ENC 0x0080 #define V4L2_FMT_FLAG_CSC_HSV_ENC V4L2_FMT_FLAG_CSC_YCBCR_ENC #define V4L2_FMT_FLAG_CSC_QUANTIZATION 0x0100 +#define V4L2_FMT_FLAG_META_LINE_BASED 0x0200 /* Frame Size and frame rate enumeration */ /* @@ -1036,6 +1070,7 @@ struct v4l2_requestbuffers { #define V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF (1 << 5) #define V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS (1 << 6) #define V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS (1 << 7) +#define V4L2_BUF_CAP_SUPPORTS_REMOVE_BUFS (1 << 8) /** * struct v4l2_plane - plane info for multi-planar buffers @@ -1841,7 +1876,7 @@ struct v4l2_ext_control { struct v4l2_ctrl_hdr10_cll_info __user *p_hdr10_cll_info; struct v4l2_ctrl_hdr10_mastering_display __user *p_hdr10_mastering_display; void __user *ptr; - }; + } __attribute__ ((packed)); } __attribute__ ((packed)); struct v4l2_ext_controls { @@ -2415,10 +2450,19 @@ struct v4l2_sdr_format { * struct v4l2_meta_format - metadata format definition * @dataformat: little endian four character code (fourcc) * @buffersize: maximum size in bytes required for data + * @width: number of data units of data per line (valid for line + * based formats only, see format documentation) + * @height: number of lines of data per buffer (valid for line based + * formats only) + * @bytesperline: offset between the beginnings of two adjacent lines in + * bytes (valid for line based formats only) */ struct v4l2_meta_format { __u32 dataformat; __u32 buffersize; + __u32 width; + __u32 height; + __u32 bytesperline; } __attribute__ ((packed)); /** @@ -2624,6 +2668,20 @@ struct v4l2_create_buffers { __u32 reserved[5]; }; +/** + * struct v4l2_remove_buffers - VIDIOC_REMOVE_BUFS argument + * @index: the first buffer to be removed + * @count: number of buffers to removed + * @type: enum v4l2_buf_type + * @reserved: future extensions + */ +struct v4l2_remove_buffers { + __u32 index; + __u32 count; + __u32 type; + __u32 reserved[13]; +}; + /* * I O C T L C O D E S F O R V I D E O D E V I C E S * @@ -2723,6 +2781,8 @@ struct v4l2_create_buffers { #define VIDIOC_DBG_G_CHIP_INFO _IOWR('V', 102, struct v4l2_dbg_chip_info) #define VIDIOC_QUERY_EXT_CTRL _IOWR('V', 103, struct v4l2_query_ext_ctrl) +#define VIDIOC_REMOVE_BUFS _IOWR('V', 104, struct v4l2_remove_buffers) + /* Reminder: when adding new ioctls please add support for them to drivers/media/v4l2-core/v4l2-compat-ioctl32.c as well! */ diff --git a/include/uapi/linux/virtio_bt.h b/include/uapi/linux/virtio_bt.h index af798f4c9680..3cc7d633456b 100644 --- a/include/uapi/linux/virtio_bt.h +++ b/include/uapi/linux/virtio_bt.h @@ -13,7 +13,6 @@ enum virtio_bt_config_type { VIRTIO_BT_CONFIG_TYPE_PRIMARY = 0, - VIRTIO_BT_CONFIG_TYPE_AMP = 1, }; enum virtio_bt_config_vendor { diff --git a/include/uapi/linux/virtio_mem.h b/include/uapi/linux/virtio_mem.h index e9122f1d0e0c..6e4b2cf6b7f1 100644 --- a/include/uapi/linux/virtio_mem.h +++ b/include/uapi/linux/virtio_mem.h @@ -90,6 +90,8 @@ #define VIRTIO_MEM_F_ACPI_PXM 0 /* unplugged memory must not be accessed */ #define VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE 1 +/* plugged memory will remain plugged when suspending+resuming */ +#define VIRTIO_MEM_F_PERSISTENT_SUSPEND 2 /* --- virtio-mem: guest -> host requests --- */ diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h index cc65ef0f3c3e..ac9174717ef1 100644 --- a/include/uapi/linux/virtio_net.h +++ b/include/uapi/linux/virtio_net.h @@ -56,6 +56,7 @@ #define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow * Steering */ #define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */ +#define VIRTIO_NET_F_DEVICE_STATS 50 /* Device can provide device-level statistics. */ #define VIRTIO_NET_F_VQ_NOTF_COAL 52 /* Device supports virtqueue notification coalescing */ #define VIRTIO_NET_F_NOTF_COAL 53 /* Device supports notifications coalescing */ #define VIRTIO_NET_F_GUEST_USO4 54 /* Guest can handle USOv4 in. */ @@ -406,4 +407,146 @@ struct virtio_net_ctrl_coal_vq { struct virtio_net_ctrl_coal coal; }; +/* + * Device Statistics + */ +#define VIRTIO_NET_CTRL_STATS 8 +#define VIRTIO_NET_CTRL_STATS_QUERY 0 +#define VIRTIO_NET_CTRL_STATS_GET 1 + +struct virtio_net_stats_capabilities { + +#define VIRTIO_NET_STATS_TYPE_CVQ (1ULL << 32) + +#define VIRTIO_NET_STATS_TYPE_RX_BASIC (1ULL << 0) +#define VIRTIO_NET_STATS_TYPE_RX_CSUM (1ULL << 1) +#define VIRTIO_NET_STATS_TYPE_RX_GSO (1ULL << 2) +#define VIRTIO_NET_STATS_TYPE_RX_SPEED (1ULL << 3) + +#define VIRTIO_NET_STATS_TYPE_TX_BASIC (1ULL << 16) +#define VIRTIO_NET_STATS_TYPE_TX_CSUM (1ULL << 17) +#define VIRTIO_NET_STATS_TYPE_TX_GSO (1ULL << 18) +#define VIRTIO_NET_STATS_TYPE_TX_SPEED (1ULL << 19) + + __le64 supported_stats_types[1]; +}; + +struct virtio_net_ctrl_queue_stats { + struct { + __le16 vq_index; + __le16 reserved[3]; + __le64 types_bitmap[1]; + } stats[1]; +}; + +struct virtio_net_stats_reply_hdr { +#define VIRTIO_NET_STATS_TYPE_REPLY_CVQ 32 + +#define VIRTIO_NET_STATS_TYPE_REPLY_RX_BASIC 0 +#define VIRTIO_NET_STATS_TYPE_REPLY_RX_CSUM 1 +#define VIRTIO_NET_STATS_TYPE_REPLY_RX_GSO 2 +#define VIRTIO_NET_STATS_TYPE_REPLY_RX_SPEED 3 + +#define VIRTIO_NET_STATS_TYPE_REPLY_TX_BASIC 16 +#define VIRTIO_NET_STATS_TYPE_REPLY_TX_CSUM 17 +#define VIRTIO_NET_STATS_TYPE_REPLY_TX_GSO 18 +#define VIRTIO_NET_STATS_TYPE_REPLY_TX_SPEED 19 + __u8 type; + __u8 reserved; + __le16 vq_index; + __le16 reserved1; + __le16 size; +}; + +struct virtio_net_stats_cvq { + struct virtio_net_stats_reply_hdr hdr; + + __le64 command_num; + __le64 ok_num; +}; + +struct virtio_net_stats_rx_basic { + struct virtio_net_stats_reply_hdr hdr; + + __le64 rx_notifications; + + __le64 rx_packets; + __le64 rx_bytes; + + __le64 rx_interrupts; + + __le64 rx_drops; + __le64 rx_drop_overruns; +}; + +struct virtio_net_stats_tx_basic { + struct virtio_net_stats_reply_hdr hdr; + + __le64 tx_notifications; + + __le64 tx_packets; + __le64 tx_bytes; + + __le64 tx_interrupts; + + __le64 tx_drops; + __le64 tx_drop_malformed; +}; + +struct virtio_net_stats_rx_csum { + struct virtio_net_stats_reply_hdr hdr; + + __le64 rx_csum_valid; + __le64 rx_needs_csum; + __le64 rx_csum_none; + __le64 rx_csum_bad; +}; + +struct virtio_net_stats_tx_csum { + struct virtio_net_stats_reply_hdr hdr; + + __le64 tx_csum_none; + __le64 tx_needs_csum; +}; + +struct virtio_net_stats_rx_gso { + struct virtio_net_stats_reply_hdr hdr; + + __le64 rx_gso_packets; + __le64 rx_gso_bytes; + __le64 rx_gso_packets_coalesced; + __le64 rx_gso_bytes_coalesced; +}; + +struct virtio_net_stats_tx_gso { + struct virtio_net_stats_reply_hdr hdr; + + __le64 tx_gso_packets; + __le64 tx_gso_bytes; + __le64 tx_gso_segments; + __le64 tx_gso_segments_bytes; + __le64 tx_gso_packets_noseg; + __le64 tx_gso_bytes_noseg; +}; + +struct virtio_net_stats_rx_speed { + struct virtio_net_stats_reply_hdr hdr; + + /* rx_{packets,bytes}_allowance_exceeded are too long. So rename to + * short name. + */ + __le64 rx_ratelimit_packets; + __le64 rx_ratelimit_bytes; +}; + +struct virtio_net_stats_tx_speed { + struct virtio_net_stats_reply_hdr hdr; + + /* tx_{packets,bytes}_allowance_exceeded are too long. So rename to + * short name. + */ + __le64 tx_ratelimit_packets; + __le64 tx_ratelimit_bytes; +}; + #endif /* _UAPI_LINUX_VIRTIO_NET_H */ diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h index 6a77328be114..f28701500714 100644 --- a/include/uapi/linux/xfrm.h +++ b/include/uapi/linux/xfrm.h @@ -141,6 +141,11 @@ enum { XFRM_POLICY_MAX = 3 }; +enum xfrm_sa_dir { + XFRM_SA_DIR_IN = 1, + XFRM_SA_DIR_OUT = 2 +}; + enum { XFRM_SHARE_ANY, /* No limitations */ XFRM_SHARE_SESSION, /* For this session only */ @@ -228,7 +233,7 @@ enum { #define XFRM_NR_MSGTYPES (XFRM_MSG_MAX + 1 - XFRM_MSG_BASE) /* - * Generic LSM security context for comunicating to user space + * Generic LSM security context for communicating to user space * NOTE: Same format as sadb_x_sec_ctx */ struct xfrm_user_sec_ctx { @@ -315,6 +320,8 @@ enum xfrm_attr_type_t { XFRMA_SET_MARK_MASK, /* __u32 */ XFRMA_IF_ID, /* __u32 */ XFRMA_MTIMER_THRESH, /* __u32 in seconds for input SA */ + XFRMA_SA_DIR, /* __u8 */ + XFRMA_NAT_KEEPALIVE_INTERVAL, /* __u32 in seconds for NAT keepalive */ __XFRMA_MAX #define XFRMA_OUTPUT_MARK XFRMA_SET_MARK /* Compatibility */ diff --git a/include/uapi/linux/zorro_ids.h b/include/uapi/linux/zorro_ids.h index 6e574d7b7d79..393f2ee9c042 100644 --- a/include/uapi/linux/zorro_ids.h +++ b/include/uapi/linux/zorro_ids.h @@ -449,6 +449,9 @@ #define ZORRO_PROD_VMC_ISDN_BLASTER_Z2 ZORRO_ID(VMC, 0x01, 0) #define ZORRO_PROD_VMC_HYPERCOM_4 ZORRO_ID(VMC, 0x02, 0) +#define ZORRO_MANUF_CSLAB 0x1400 +#define ZORRO_PROD_CSLAB_WARP_1260 ZORRO_ID(CSLAB, 0x65, 0) + #define ZORRO_MANUF_INFORMATION 0x157C #define ZORRO_PROD_INFORMATION_ISDN_ENGINE_I ZORRO_ID(INFORMATION, 0x64, 0) |