summaryrefslogtreecommitdiff
path: root/sound
diff options
context:
space:
mode:
Diffstat (limited to 'sound')
-rw-r--r--sound/aoa/soundbus/i2sbus/i2sbus-core.c22
-rw-r--r--sound/aoa/soundbus/i2sbus/i2sbus-pcm.c328
-rw-r--r--sound/aoa/soundbus/i2sbus/i2sbus.h6
3 files changed, 210 insertions, 146 deletions
diff --git a/sound/aoa/soundbus/i2sbus/i2sbus-core.c b/sound/aoa/soundbus/i2sbus/i2sbus-core.c
index e593a1333fe3..e36f6aa448d4 100644
--- a/sound/aoa/soundbus/i2sbus/i2sbus-core.c
+++ b/sound/aoa/soundbus/i2sbus/i2sbus-core.c
@@ -41,8 +41,8 @@ static int alloc_dbdma_descriptor_ring(struct i2sbus_dev *i2sdev,
struct dbdma_command_mem *r,
int numcmds)
{
- /* one more for rounding */
- r->size = (numcmds+1) * sizeof(struct dbdma_cmd);
+ /* one more for rounding, one for branch back, one for stop command */
+ r->size = (numcmds + 3) * sizeof(struct dbdma_cmd);
/* We use the PCI APIs for now until the generic one gets fixed
* enough or until we get some macio-specific versions
*/
@@ -377,11 +377,8 @@ static int i2sbus_suspend(struct macio_dev* dev, pm_message_t state)
if (i2sdev->sound.pcm) {
/* Suspend PCM streams */
snd_pcm_suspend_all(i2sdev->sound.pcm);
- /* Probably useless as we handle
- * power transitions ourselves */
- snd_power_change_state(i2sdev->sound.pcm->card,
- SNDRV_CTL_POWER_D3hot);
}
+
/* Notify codecs */
list_for_each_entry(cii, &i2sdev->sound.codec_list, list) {
err = 0;
@@ -390,7 +387,11 @@ static int i2sbus_suspend(struct macio_dev* dev, pm_message_t state)
if (err)
ret = err;
}
+
+ /* wait until streams are stopped */
+ i2sbus_wait_for_stop_both(i2sdev);
}
+
return ret;
}
@@ -402,6 +403,9 @@ static int i2sbus_resume(struct macio_dev* dev)
int err, ret = 0;
list_for_each_entry(i2sdev, &control->list, item) {
+ /* reset i2s bus format etc. */
+ i2sbus_pcm_prepare_both(i2sdev);
+
/* Notify codecs so they can re-initialize */
list_for_each_entry(cii, &i2sdev->sound.codec_list, list) {
err = 0;
@@ -410,12 +414,6 @@ static int i2sbus_resume(struct macio_dev* dev)
if (err)
ret = err;
}
- /* Notify Alsa */
- if (i2sdev->sound.pcm) {
- /* Same comment as above, probably useless */
- snd_power_change_state(i2sdev->sound.pcm->card,
- SNDRV_CTL_POWER_D0);
- }
}
return ret;
diff --git a/sound/aoa/soundbus/i2sbus/i2sbus-pcm.c b/sound/aoa/soundbus/i2sbus/i2sbus-pcm.c
index 7c81db7e52c1..c6b42f9bdbc9 100644
--- a/sound/aoa/soundbus/i2sbus/i2sbus-pcm.c
+++ b/sound/aoa/soundbus/i2sbus/i2sbus-pcm.c
@@ -125,7 +125,8 @@ static int i2sbus_pcm_open(struct i2sbus_dev *i2sdev, int in)
}
/* bus dependent stuff */
hw->info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_RESUME;
+ SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_RESUME |
+ SNDRV_PCM_INFO_JOINT_DUPLEX;
CHECK_RATE(5512);
CHECK_RATE(8000);
@@ -245,18 +246,78 @@ static int i2sbus_pcm_close(struct i2sbus_dev *i2sdev, int in)
return err;
}
+static void i2sbus_wait_for_stop(struct i2sbus_dev *i2sdev,
+ struct pcm_info *pi)
+{
+ unsigned long flags;
+ struct completion done;
+ long timeout;
+
+ spin_lock_irqsave(&i2sdev->low_lock, flags);
+ if (pi->dbdma_ring.stopping) {
+ init_completion(&done);
+ pi->stop_completion = &done;
+ spin_unlock_irqrestore(&i2sdev->low_lock, flags);
+ timeout = wait_for_completion_timeout(&done, HZ);
+ spin_lock_irqsave(&i2sdev->low_lock, flags);
+ pi->stop_completion = NULL;
+ if (timeout == 0) {
+ /* timeout expired, stop dbdma forcefully */
+ printk(KERN_ERR "i2sbus_wait_for_stop: timed out\n");
+ /* make sure RUN, PAUSE and S0 bits are cleared */
+ out_le32(&pi->dbdma->control, (RUN | PAUSE | 1) << 16);
+ pi->dbdma_ring.stopping = 0;
+ timeout = 10;
+ while (in_le32(&pi->dbdma->status) & ACTIVE) {
+ if (--timeout <= 0)
+ break;
+ udelay(1);
+ }
+ }
+ }
+ spin_unlock_irqrestore(&i2sdev->low_lock, flags);
+}
+
+#ifdef CONFIG_PM
+void i2sbus_wait_for_stop_both(struct i2sbus_dev *i2sdev)
+{
+ struct pcm_info *pi;
+
+ get_pcm_info(i2sdev, 0, &pi, NULL);
+ i2sbus_wait_for_stop(i2sdev, pi);
+ get_pcm_info(i2sdev, 1, &pi, NULL);
+ i2sbus_wait_for_stop(i2sdev, pi);
+}
+#endif
+
static int i2sbus_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
}
-static int i2sbus_hw_free(struct snd_pcm_substream *substream)
+static inline int i2sbus_hw_free(struct snd_pcm_substream *substream, int in)
{
+ struct i2sbus_dev *i2sdev = snd_pcm_substream_chip(substream);
+ struct pcm_info *pi;
+
+ get_pcm_info(i2sdev, in, &pi, NULL);
+ if (pi->dbdma_ring.stopping)
+ i2sbus_wait_for_stop(i2sdev, pi);
snd_pcm_lib_free_pages(substream);
return 0;
}
+static int i2sbus_playback_hw_free(struct snd_pcm_substream *substream)
+{
+ return i2sbus_hw_free(substream, 0);
+}
+
+static int i2sbus_record_hw_free(struct snd_pcm_substream *substream)
+{
+ return i2sbus_hw_free(substream, 1);
+}
+
static int i2sbus_pcm_prepare(struct i2sbus_dev *i2sdev, int in)
{
/* whee. Hard work now. The user has selected a bitrate
@@ -264,7 +325,7 @@ static int i2sbus_pcm_prepare(struct i2sbus_dev *i2sdev, int in)
* I2S controller appropriately. */
struct snd_pcm_runtime *runtime;
struct dbdma_cmd *command;
- int i, periodsize;
+ int i, periodsize, nperiods;
dma_addr_t offset;
struct bus_info bi;
struct codec_info_item *cii;
@@ -274,6 +335,7 @@ static int i2sbus_pcm_prepare(struct i2sbus_dev *i2sdev, int in)
struct pcm_info *pi, *other;
int cnt;
int result = 0;
+ unsigned int cmd, stopaddr;
mutex_lock(&i2sdev->lock);
@@ -283,6 +345,13 @@ static int i2sbus_pcm_prepare(struct i2sbus_dev *i2sdev, int in)
result = -EBUSY;
goto out_unlock;
}
+ if (pi->dbdma_ring.stopping)
+ i2sbus_wait_for_stop(i2sdev, pi);
+
+ if (!pi->substream || !pi->substream->runtime) {
+ result = -EINVAL;
+ goto out_unlock;
+ }
runtime = pi->substream->runtime;
pi->active = 1;
@@ -297,24 +366,43 @@ static int i2sbus_pcm_prepare(struct i2sbus_dev *i2sdev, int in)
i2sdev->rate = runtime->rate;
periodsize = snd_pcm_lib_period_bytes(pi->substream);
+ nperiods = pi->substream->runtime->periods;
pi->current_period = 0;
/* generate dbdma command ring first */
command = pi->dbdma_ring.cmds;
+ memset(command, 0, (nperiods + 2) * sizeof(struct dbdma_cmd));
+
+ /* commands to DMA to/from the ring */
+ /*
+ * For input, we need to do a graceful stop; if we abort
+ * the DMA, we end up with leftover bytes that corrupt
+ * the next recording. To do this we set the S0 status
+ * bit and wait for the DMA controller to stop. Each
+ * command has a branch condition to
+ * make it branch to a stop command if S0 is set.
+ * On input we also need to wait for the S7 bit to be
+ * set before turning off the DMA controller.
+ * In fact we do the graceful stop for output as well.
+ */
offset = runtime->dma_addr;
- for (i = 0; i < pi->substream->runtime->periods;
- i++, command++, offset += periodsize) {
- memset(command, 0, sizeof(struct dbdma_cmd));
- command->command =
- cpu_to_le16((in ? INPUT_MORE : OUTPUT_MORE) | INTR_ALWAYS);
+ cmd = (in? INPUT_MORE: OUTPUT_MORE) | BR_IFSET | INTR_ALWAYS;
+ stopaddr = pi->dbdma_ring.bus_cmd_start +
+ (nperiods + 1) * sizeof(struct dbdma_cmd);
+ for (i = 0; i < nperiods; i++, command++, offset += periodsize) {
+ command->command = cpu_to_le16(cmd);
+ command->cmd_dep = cpu_to_le32(stopaddr);
command->phy_addr = cpu_to_le32(offset);
command->req_count = cpu_to_le16(periodsize);
- command->xfer_status = cpu_to_le16(0);
}
- /* last one branches back to first */
- command--;
- command->command |= cpu_to_le16(BR_ALWAYS);
+
+ /* branch back to beginning of ring */
+ command->command = cpu_to_le16(DBDMA_NOP | BR_ALWAYS);
command->cmd_dep = cpu_to_le32(pi->dbdma_ring.bus_cmd_start);
+ command++;
+
+ /* set stop command */
+ command->command = cpu_to_le16(DBDMA_STOP);
/* ok, let's set the serial format and stuff */
switch (runtime->format) {
@@ -435,16 +523,18 @@ static int i2sbus_pcm_prepare(struct i2sbus_dev *i2sdev, int in)
return result;
}
-static struct dbdma_cmd STOP_CMD = {
- .command = __constant_cpu_to_le16(DBDMA_STOP),
-};
+#ifdef CONFIG_PM
+void i2sbus_pcm_prepare_both(struct i2sbus_dev *i2sdev)
+{
+ i2sbus_pcm_prepare(i2sdev, 0);
+ i2sbus_pcm_prepare(i2sdev, 1);
+}
+#endif
static int i2sbus_pcm_trigger(struct i2sbus_dev *i2sdev, int in, int cmd)
{
struct codec_info_item *cii;
struct pcm_info *pi;
- int timeout;
- struct dbdma_cmd tmp;
int result = 0;
unsigned long flags;
@@ -464,92 +554,50 @@ static int i2sbus_pcm_trigger(struct i2sbus_dev *i2sdev, int in, int cmd)
cii->codec->start(cii, pi->substream);
pi->dbdma_ring.running = 1;
- /* reset dma engine */
- out_le32(&pi->dbdma->control,
- 0 | (RUN | PAUSE | FLUSH | WAKE) << 16);
- timeout = 100;
- while (in_le32(&pi->dbdma->status) & RUN && timeout--)
- udelay(1);
- if (timeout <= 0) {
- printk(KERN_ERR
- "i2sbus: error waiting for dma reset\n");
- result = -ENXIO;
- goto out_unlock;
+ if (pi->dbdma_ring.stopping) {
+ /* Clear the S0 bit, then see if we stopped yet */
+ out_le32(&pi->dbdma->control, 1 << 16);
+ if (in_le32(&pi->dbdma->status) & ACTIVE) {
+ /* possible race here? */
+ udelay(10);
+ if (in_le32(&pi->dbdma->status) & ACTIVE) {
+ pi->dbdma_ring.stopping = 0;
+ goto out_unlock; /* keep running */
+ }
+ }
}
+ /* make sure RUN, PAUSE and S0 bits are cleared */
+ out_le32(&pi->dbdma->control, (RUN | PAUSE | 1) << 16);
+
+ /* set branch condition select register */
+ out_le32(&pi->dbdma->br_sel, (1 << 16) | 1);
+
/* write dma command buffer address to the dbdma chip */
out_le32(&pi->dbdma->cmdptr, pi->dbdma_ring.bus_cmd_start);
- /* post PCI write */
- mb();
- (void)in_le32(&pi->dbdma->status);
-
- /* change first command to STOP */
- tmp = *pi->dbdma_ring.cmds;
- *pi->dbdma_ring.cmds = STOP_CMD;
-
- /* set running state, remember that the first command is STOP */
- out_le32(&pi->dbdma->control, RUN | (RUN << 16));
- timeout = 100;
- /* wait for STOP to be executed */
- while (in_le32(&pi->dbdma->status) & ACTIVE && timeout--)
- udelay(1);
- if (timeout <= 0) {
- printk(KERN_ERR "i2sbus: error waiting for dma stop\n");
- result = -ENXIO;
- goto out_unlock;
- }
- /* again, write dma command buffer address to the dbdma chip,
- * this time of the first real command */
- *pi->dbdma_ring.cmds = tmp;
- out_le32(&pi->dbdma->cmdptr, pi->dbdma_ring.bus_cmd_start);
- /* post write */
- mb();
- (void)in_le32(&pi->dbdma->status);
-
- /* reset dma engine again */
- out_le32(&pi->dbdma->control,
- 0 | (RUN | PAUSE | FLUSH | WAKE) << 16);
- timeout = 100;
- while (in_le32(&pi->dbdma->status) & RUN && timeout--)
- udelay(1);
- if (timeout <= 0) {
- printk(KERN_ERR
- "i2sbus: error waiting for dma reset\n");
- result = -ENXIO;
- goto out_unlock;
- }
- /* wake up the chip with the next descriptor */
- out_le32(&pi->dbdma->control,
- (RUN | WAKE) | ((RUN | WAKE) << 16));
- /* get the frame count */
+ /* initialize the frame count and current period */
+ pi->current_period = 0;
pi->frame_count = in_le32(&i2sdev->intfregs->frame_count);
+ /* set the DMA controller running */
+ out_le32(&pi->dbdma->control, (RUN << 16) | RUN);
+
/* off you go! */
break;
+
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
if (!pi->dbdma_ring.running) {
result = -EALREADY;
goto out_unlock;
}
+ pi->dbdma_ring.running = 0;
- /* turn off all relevant bits */
- out_le32(&pi->dbdma->control,
- (RUN | WAKE | FLUSH | PAUSE) << 16);
- {
- /* FIXME: move to own function */
- int timeout = 5000;
- while ((in_le32(&pi->dbdma->status) & RUN)
- && --timeout > 0)
- udelay(1);
- if (!timeout)
- printk(KERN_ERR
- "i2sbus: timed out turning "
- "off dbdma engine!\n");
- }
+ /* Set the S0 bit to make the DMA branch to the stop cmd */
+ out_le32(&pi->dbdma->control, (1 << 16) | 1);
+ pi->dbdma_ring.stopping = 1;
- pi->dbdma_ring.running = 0;
list_for_each_entry(cii, &i2sdev->sound.codec_list, list)
if (cii->codec->stop)
cii->codec->stop(cii, pi->substream);
@@ -574,70 +622,82 @@ static snd_pcm_uframes_t i2sbus_pcm_pointer(struct i2sbus_dev *i2sdev, int in)
fc = in_le32(&i2sdev->intfregs->frame_count);
fc = fc - pi->frame_count;
- return (bytes_to_frames(pi->substream->runtime,
- pi->current_period *
- snd_pcm_lib_period_bytes(pi->substream))
- + fc) % pi->substream->runtime->buffer_size;
+ if (fc >= pi->substream->runtime->buffer_size)
+ fc %= pi->substream->runtime->buffer_size;
+ return fc;
}
static inline void handle_interrupt(struct i2sbus_dev *i2sdev, int in)
{
struct pcm_info *pi;
- u32 fc;
- u32 delta;
+ u32 fc, nframes;
+ u32 status;
+ int timeout, i;
+ int dma_stopped = 0;
+ struct snd_pcm_runtime *runtime;
spin_lock(&i2sdev->low_lock);
get_pcm_info(i2sdev, in, &pi, NULL);
-
- if (!pi->dbdma_ring.running) {
- /* there was still an interrupt pending
- * while we stopped. or maybe another
- * processor (not the one that was stopping
- * the DMA engine) was spinning above
- * waiting for the lock. */
+ if (!pi->dbdma_ring.running && !pi->dbdma_ring.stopping)
goto out_unlock;
- }
- fc = in_le32(&i2sdev->intfregs->frame_count);
- /* a counter overflow does not change the calculation. */
- delta = fc - pi->frame_count;
-
- /* update current_period */
- while (delta >= pi->substream->runtime->period_size) {
- pi->current_period++;
- delta = delta - pi->substream->runtime->period_size;
- }
-
- if (unlikely(delta)) {
- /* Some interrupt came late, so check the dbdma.
- * This special case exists to syncronize the frame_count with
- * the dbdma transfer, but is hit every once in a while. */
- int period;
-
- period = (in_le32(&pi->dbdma->cmdptr)
- - pi->dbdma_ring.bus_cmd_start)
- / sizeof(struct dbdma_cmd);
- pi->current_period = pi->current_period
- % pi->substream->runtime->periods;
-
- while (pi->current_period != period) {
- pi->current_period++;
- pi->current_period %= pi->substream->runtime->periods;
- /* Set delta to zero, as the frame_count value is too
- * high (otherwise the code path will not be executed).
- * This corrects the fact that the frame_count is too
- * low at the beginning due to buffering. */
- delta = 0;
+ i = pi->current_period;
+ runtime = pi->substream->runtime;
+ while (pi->dbdma_ring.cmds[i].xfer_status) {
+ if (le16_to_cpu(pi->dbdma_ring.cmds[i].xfer_status) & BT)
+ /*
+ * BT is the branch taken bit. If it took a branch
+ * it is because we set the S0 bit to make it
+ * branch to the stop command.
+ */
+ dma_stopped = 1;
+ pi->dbdma_ring.cmds[i].xfer_status = 0;
+
+ if (++i >= runtime->periods) {
+ i = 0;
+ pi->frame_count += runtime->buffer_size;
}
+ pi->current_period = i;
+
+ /*
+ * Check the frame count. The DMA tends to get a bit
+ * ahead of the frame counter, which confuses the core.
+ */
+ fc = in_le32(&i2sdev->intfregs->frame_count);
+ nframes = i * runtime->period_size;
+ if (fc < pi->frame_count + nframes)
+ pi->frame_count = fc - nframes;
}
- pi->frame_count = fc - delta;
- pi->current_period %= pi->substream->runtime->periods;
+ if (dma_stopped) {
+ timeout = 1000;
+ for (;;) {
+ status = in_le32(&pi->dbdma->status);
+ if (!(status & ACTIVE) && (!in || (status & 0x80)))
+ break;
+ if (--timeout <= 0) {
+ printk(KERN_ERR "i2sbus: timed out "
+ "waiting for DMA to stop!\n");
+ break;
+ }
+ udelay(1);
+ }
+
+ /* Turn off DMA controller, clear S0 bit */
+ out_le32(&pi->dbdma->control, (RUN | PAUSE | 1) << 16);
+ pi->dbdma_ring.stopping = 0;
+ if (pi->stop_completion)
+ complete(pi->stop_completion);
+ }
+
+ if (!pi->dbdma_ring.running)
+ goto out_unlock;
spin_unlock(&i2sdev->low_lock);
/* may call _trigger again, hence needs to be unlocked */
snd_pcm_period_elapsed(pi->substream);
return;
+
out_unlock:
spin_unlock(&i2sdev->low_lock);
}
@@ -718,7 +778,7 @@ static struct snd_pcm_ops i2sbus_playback_ops = {
.close = i2sbus_playback_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = i2sbus_hw_params,
- .hw_free = i2sbus_hw_free,
+ .hw_free = i2sbus_playback_hw_free,
.prepare = i2sbus_playback_prepare,
.trigger = i2sbus_playback_trigger,
.pointer = i2sbus_playback_pointer,
@@ -788,7 +848,7 @@ static struct snd_pcm_ops i2sbus_record_ops = {
.close = i2sbus_record_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = i2sbus_hw_params,
- .hw_free = i2sbus_hw_free,
+ .hw_free = i2sbus_record_hw_free,
.prepare = i2sbus_record_prepare,
.trigger = i2sbus_record_trigger,
.pointer = i2sbus_record_pointer,
diff --git a/sound/aoa/soundbus/i2sbus/i2sbus.h b/sound/aoa/soundbus/i2sbus/i2sbus.h
index ec20ee615d7f..ff29654782c9 100644
--- a/sound/aoa/soundbus/i2sbus/i2sbus.h
+++ b/sound/aoa/soundbus/i2sbus/i2sbus.h
@@ -10,6 +10,7 @@
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
+#include <linux/completion.h>
#include <sound/pcm.h>
@@ -34,6 +35,7 @@ struct dbdma_command_mem {
void *space;
int size;
u32 running:1;
+ u32 stopping:1;
};
struct pcm_info {
@@ -45,6 +47,7 @@ struct pcm_info {
u32 frame_count;
struct dbdma_command_mem dbdma_ring;
volatile struct dbdma_regs __iomem *dbdma;
+ struct completion *stop_completion;
};
enum {
@@ -101,6 +104,9 @@ i2sbus_tx_intr(int irq, void *devid);
extern irqreturn_t
i2sbus_rx_intr(int irq, void *devid);
+extern void i2sbus_wait_for_stop_both(struct i2sbus_dev *i2sdev);
+extern void i2sbus_pcm_prepare_both(struct i2sbus_dev *i2sdev);
+
/* control specific functions */
extern int i2sbus_control_init(struct macio_dev* dev,
struct i2sbus_control **c);