summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-02-23Linux 4.9.303v4.9.303Greg Kroah-Hartman
Link: https://lore.kernel.org/r/20220221084908.568970525@linuxfoundation.org Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Slade Watkins <slade@sladewatkins.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23net: usb: qmi_wwan: Add support for Dell DW5829eSlark Xiao
[ Upstream commit 8ecbb179286cbc91810c16caeb3396e06305cd0c ] Dell DW5829e same as DW5821e except the CAT level. DW5821e supports CAT16 but DW5829e supports CAT9. Also, DW5829e includes normal and eSIM type. Please see below test evidence: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by: Slark Xiao <slark_xiao@163.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20220209024717.8564-1-slark_xiao@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23tracing: Fix tp_printk option related with tp_printk_stop_on_bootJaeSang Yoo
[ Upstream commit 3203ce39ac0b2a57a84382ec184c7d4a0bede175 ] The kernel parameter "tp_printk_stop_on_boot" starts with "tp_printk" which is the same as another kernel parameter "tp_printk". If "tp_printk" setup is called before the "tp_printk_stop_on_boot", it will override the latter and keep it from being set. This is similar to other kernel parameter issues, such as: Commit 745a600cf1a6 ("um: console: Ignore console= option") or init/do_mounts.c:45 (setup function of "ro" kernel param) Fix it by checking for a "_" right after the "tp_printk" and if that exists do not process the parameter. Link: https://lkml.kernel.org/r/20220208195421.969326-1-jsyoo5b@gmail.com Signed-off-by: JaeSang Yoo <jsyoo5b@gmail.com> [ Fixed up change log and added space after if condition ] Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23ata: libata-core: Disable TRIM on M88V29Zoltán Böszörményi
[ Upstream commit c8ea23d5fa59f28302d4e3370c75d9c308e64410 ] This device is a CF card, or possibly an SSD in CF form factor. It supports NCQ and high speed DMA. While it also advertises TRIM support, I/O errors are reported when the discard mount option fstrim is used. TRIM also fails when disabling NCQ and not just as an NCQ command. TRIM must be disabled for this device. Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23NFS: Do not report writeback errors in nfs_getattr()Trond Myklebust
[ Upstream commit d19e0183a88306acda07f4a01fedeeffe2a2a06b ] The result of the writeback, whether it is an ENOSPC or an EIO, or anything else, does not inhibit the NFS client from reporting the correct file timestamps. Fixes: 79566ef018f5 ("NFS: Getattr doesn't require data sync semantics") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAWJim Mattson
[ Upstream commit 710c476514313c74045c41c0571bb5178fd16e3d ] AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of a PerfEvtSeln MSR. Don't mask off the high nybble when configuring a RAW perf event. Fixes: ca724305a2b0 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Signed-off-by: Jim Mattson <jmattson@google.com> Message-Id: <20220203014813.2130559-2-jmattson@google.com> Reviewed-by: David Dunn <daviddunn@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23lib/iov_iter: initialize "flags" in new pipe_bufferMax Kellermann
commit 9d2231c5d74e13b2a0546fee6737ee4446017903 upstream. The functions copy_page_to_iter_pipe() and push_pipe() can both allocate a new pipe_buffer, but the "flags" member initializer is missing. Fixes: 241699cd72a8 ("new iov_iter flavour: pipe-backed") To: Alexander Viro <viro@zeniv.linux.org.uk> To: linux-fsdevel@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23i2c: brcmstb: fix support for DSL and CM variantsRafał Miłecki
commit 834cea3a252ed4847db076a769ad9efe06afe2d5 upstream. DSL and CM (Cable Modem) support 8 B max transfer size and have a custom DT binding for that reason. This driver was checking for a wrong "compatible" however which resulted in an incorrect setup. Fixes: e2e5a2c61837 ("i2c: brcmstb: Adding support for CM and DSL SoCs") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23EDAC: Fix calculation of returned address and next offset in edac_align_ptr()Eliav Farber
commit f8efca92ae509c25e0a4bd5d0a86decea4f0c41e upstream. Do alignment logic properly and use the "ptr" local variable for calculating the remainder of the alignment. This became an issue because struct edac_mc_layer has a size that is not zero modulo eight, and the next offset that was prepared for the private data was unaligned, causing an alignment exception. The patch in Fixes: which broke this actually wanted to "what we actually care about is the alignment of the actual pointer that's about to be returned." But it didn't check that alignment. Use the correct variable "ptr" for that. [ bp: Massage commit message. ] Fixes: 8447c4d15e35 ("edac: Do alignment logic properly in edac_align_ptr()") Signed-off-by: Eliav Farber <farbere@amazon.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220113100622.12783-2-farbere@amazon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23NFS: LOOKUP_DIRECTORY is also ok with symlinksTrond Myklebust
commit e0caaf75d443e02e55e146fd75fe2efc8aed5540 upstream. Commit ac795161c936 (NFSv4: Handle case where the lookup of a directory fails) [1], part of Linux since 5.17-rc2, introduced a regression, where a symbolic link on an NFS mount to a directory on another NFS does not resolve(?) the first time it is accessed: Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Fixes: ac795161c936 ("NFSv4: Handle case where the lookup of a directory fails") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Donald Buczek <buczek@molgen.mpg.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_range()Mark Brown
commit 650204ded3703b5817bd4b6a77fa47d333c4f902 upstream. When writing out a stereo control we discard the change notification from the first channel, meaning that events are only generated based on changes to the second channel. Ensure that we report a change if either channel has changed. Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220201155629.120510-4-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw()Mark Brown
commit 564778d7b1ea465f9487eedeece7527a033549c5 upstream. When writing out a stereo control we discard the change notification from the first channel, meaning that events are only generated based on changes to the second channel. Ensure that we report a change if either channel has changed. Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220201155629.120510-2-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23ALSA: hda: Fix missing codec probe on Shenker Dock 15Takashi Iwai
commit dd8e5b161d7fb9cefa1f1d6e35a39b9e1563c8d3 upstream. By some unknown reason, BIOS on Shenker Dock 15 doesn't set up the codec mask properly for the onboard audio. Let's set the forced codec mask to enable the codec discovery. Reported-by: dmummenschanz@web.de Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/trinity-f018660b-95c9-442b-a2a8-c92a56eb07ed-1644345967148@3c-app-webde-bap22 Link: https://lore.kernel.org/r/20220214100020.8870-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23ALSA: hda: Fix regression on forced probe mask optionTakashi Iwai
commit 6317f7449348a897483a2b4841f7a9190745c81b upstream. The forced probe mask via probe_mask 0x100 bit doesn't work any longer as expected since the bus init code was moved and it's clearing the codec_mask value that was set beforehand. This patch fixes the long-time regression by moving the check_probe_mask() call. Fixes: a41d122449be ("ALSA: hda - Embed bus into controller object") Reported-by: dmummenschanz@web.de Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/trinity-f018660b-95c9-442b-a2a8-c92a56eb07ed-1644345967148@3c-app-webde-bap22 Link: https://lore.kernel.org/r/20220214100020.8870-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23libsubcmd: Fix use-after-free for realloc(..., 0)Kees Cook
commit 52a9dab6d892763b2a8334a568bd4e2c1a6fde66 upstream. GCC 12 correctly reports a potential use-after-free condition in the xrealloc helper. Fix the warning by avoiding an implicit "free(ptr)" when size == 0: In file included from help.c:12: In function 'xrealloc', inlined from 'add_cmdname' at help.c:24:2: subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free] 56 | ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ subcmd-util.h:52:21: note: call to 'realloc' here 52 | void *ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free] 58 | ret = realloc(ptr, 1); | ^~~~~~~~~~~~~~~ subcmd-util.h:52:21: note: call to 'realloc' here 52 | void *ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ Fixes: 2f4ce5ec1d447beb ("perf tools: Finalize subcmd independence") Reported-by: Valdis Klētnieks <valdis.kletnieks@vt.edu> Signed-off-by: Kees Kook <keescook@chromium.org> Tested-by: Valdis Klētnieks <valdis.kletnieks@vt.edu> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: linux-hardening@vger.kernel.org Cc: Valdis Klētnieks <valdis.kletnieks@vt.edu> Link: http://lore.kernel.org/lkml/20220213182443.4037039-1-keescook@chromium.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23drop_monitor: fix data-race in dropmon_net_event / trace_napi_poll_hitEric Dumazet
commit dcd54265c8bc14bd023815e36e2d5f9d66ee1fee upstream. trace_napi_poll_hit() is reading stat->dev while another thread can write on it from dropmon_net_event() Use READ_ONCE()/WRITE_ONCE() here, RCU rules are properly enforced already, we only have to take care of load/store tearing. BUG: KCSAN: data-race in dropmon_net_event / trace_napi_poll_hit write to 0xffff88816f3ab9c0 of 8 bytes by task 20260 on cpu 1: dropmon_net_event+0xb8/0x2b0 net/core/drop_monitor.c:1579 notifier_call_chain kernel/notifier.c:84 [inline] raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:392 call_netdevice_notifiers_info net/core/dev.c:1919 [inline] call_netdevice_notifiers_extack net/core/dev.c:1931 [inline] call_netdevice_notifiers net/core/dev.c:1945 [inline] unregister_netdevice_many+0x867/0xfb0 net/core/dev.c:10415 ip_tunnel_delete_nets+0x24a/0x280 net/ipv4/ip_tunnel.c:1123 vti_exit_batch_net+0x2a/0x30 net/ipv4/ip_vti.c:515 ops_exit_list net/core/net_namespace.c:173 [inline] cleanup_net+0x4dc/0x8d0 net/core/net_namespace.c:597 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 read to 0xffff88816f3ab9c0 of 8 bytes by interrupt on cpu 0: trace_napi_poll_hit+0x89/0x1c0 net/core/drop_monitor.c:292 trace_napi_poll include/trace/events/napi.h:14 [inline] __napi_poll+0x36b/0x3f0 net/core/dev.c:6366 napi_poll net/core/dev.c:6432 [inline] net_rx_action+0x29e/0x650 net/core/dev.c:6519 __do_softirq+0x158/0x2de kernel/softirq.c:558 do_softirq+0xb1/0xf0 kernel/softirq.c:459 __local_bh_enable_ip+0x68/0x70 kernel/softirq.c:383 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x33/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:394 [inline] ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline] wg_packet_decrypt_worker+0x73c/0x780 drivers/net/wireguard/receive.c:506 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 value changed: 0xffff88815883e000 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 26435 Comm: kworker/0:1 Not tainted 5.17.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: wg-crypt-wg2 wg_packet_decrypt_worker Fixes: 4ea7e38696c7 ("dropmon: add ability to detect when hardware dropsrxpackets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neil Horman <nhorman@tuxdriver.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23iwlwifi: pcie: fix locking when "HW not ready"Johannes Berg
commit e9848aed147708a06193b40d78493b0ef6abccf2 upstream. If we run into this error path, we shouldn't unlock the mutex since it's not locked since. Fix this. Fixes: a6bd005fe92d ("iwlwifi: pcie: fix RF-Kill vs. firmware load race") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/iwlwifi.20220128142706.5d16821d1433.Id259699ddf9806459856d6aefbdbe54477aecffd@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23vsock: remove vsock from connected table when connect is interrupted by a signalSeth Forshee
commit b9208492fcaecff8f43915529ae34b3bcb03877c upstream. vsock_connect() expects that the socket could already be in the TCP_ESTABLISHED state when the connecting task wakes up with a signal pending. If this happens the socket will be in the connected table, and it is not removed when the socket state is reset. In this situation it's common for the process to retry connect(), and if the connection is successful the socket will be added to the connected table a second time, corrupting the list. Prevent this by calling vsock_remove_connected() if a signal is received while waiting for a connection. This is harmless if the socket is not in the connected table, and if it is in the table then removing it will prevent list corruption from a double add. Note for backporting: this patch requires d5afa82c977e ("vsock: correct removal of socket from the list"), which is in all current stable trees except 4.9.y. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Signed-off-by: Seth Forshee <sforshee@digitalocean.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20220217141312.2297547-1-sforshee@digitalocean.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23vsock: correct removal of socket from the listSunil Muthuswamy
commit d5afa82c977ea06f7119058fa0eb8519ea501031 upstream. The current vsock code for removal of socket from the list is both subject to race and inefficient. It takes the lock, checks whether the socket is in the list, drops the lock and if the socket was on the list, deletes it from the list. This is subject to race because as soon as the lock is dropped once it is checked for presence, that condition cannot be relied upon for any decision. It is also inefficient because if the socket is present in the list, it takes the lock twice. Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23taskstats: Cleanup the use of task->exit_codeEric W. Biederman
commit 1b5a42d9c85f0e731f01c8d1129001fd8531a8a0 upstream. In the function bacct_add_task the code reading task->exit_code was introduced in commit f3cef7a99469 ("[PATCH] csa: basic accounting over taskstats"), and it is not entirely clear what the taskstats interface is trying to return as only returning the exit_code of the first task in a process doesn't make a lot of sense. As best as I can figure the intent is to return task->exit_code after a task exits. The field is returned with per task fields, so the exit_code of the entire process is not wanted. Only the value of the first task is returned so this is not a useful way to get the per task ptrace stop code. The ordinary case of returning this value is returning after a task exits, which also precludes use for getting a ptrace value. It is common to for the first task of a process to also be the last task of a process so this field may have done something reasonable by accident in testing. Make ac_exitcode a reliable per task value by always returning it for every exited task. Setting ac_exitcode in a sensible mannter makes it possible to continue to provide this value going forward. Cc: Balbir Singh <bsingharora@gmail.com> Fixes: f3cef7a99469 ("[PATCH] csa: basic accounting over taskstats") Link: https://lkml.kernel.org/r/20220103213312.9144-5-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23xfrm: Don't accidentally set RTO_ONLINK in decode_session4()Guillaume Nault
commit 23e7b1bfed61e301853b5e35472820d919498278 upstream. Similar to commit 94e2238969e8 ("xfrm4: strip ECN bits from tos field"), clear the ECN bits from iph->tos when setting ->flowi4_tos. This ensures that the last bit of ->flowi4_tos is cleared, so ip_route_output_key_hash() isn't going to restrict the scope of the route lookup. Use ~INET_ECN_MASK instead of IPTOS_RT_MASK, because we have no reason to clear the high order bits. Found by code inspection, compile tested only. Fixes: 4da3089f2b58 ("[IPSEC]: Use TOS when doing tunnel lookups") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> [sudip: manually backport to previous location] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23drm/radeon: Fix backlight control on iMac 12,1Nicholas Bishop
commit 364438fd629f7611a84c8e6d7de91659300f1502 upstream. The iMac 12,1 does not use the gmux driver for backlight, so the radeon backlight device is needed to set the brightness. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1838 Signed-off-by: Nicholas Bishop <nicholasbishop@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23quota: make dquot_quota_sync return errors from ->sync_fsDarrick J. Wong
[ Upstream commit dd5532a4994bfda0386eb2286ec00758cee08444 ] Strangely, dquot_quota_sync ignores the return code from the ->sync_fs call, which means that quotacalls like Q_SYNC never see the error. This doesn't seem right, so fix that. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23vfs: make freeze_super abort when sync_filesystem returns errorDarrick J. Wong
[ Upstream commit 2719c7160dcfaae1f73a1c0c210ad3281c19022e ] If we fail to synchronize the filesystem while preparing to freeze the fs, abort the freeze. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23ax25: improve the incomplete fix to avoid UAF and NPD bugsDuoming Zhou
[ Upstream commit 4e0f718daf97d47cf7dec122da1be970f145c809 ] The previous commit 1ade48d0c27d ("ax25: NPD bug when detaching AX25 device") introduce lock_sock() into ax25_kill_by_device to prevent NPD bug. But the concurrency NPD or UAF bug will occur, when lock_sock() or release_sock() dereferences the ax25_cb->sock. The NULL pointer dereference bug can be shown as below: ax25_kill_by_device() | ax25_release() | ax25_destroy_socket() | ax25_cb_del() ... | ... | ax25->sk=NULL; lock_sock(s->sk); //(1) | s->ax25_dev = NULL; | ... release_sock(s->sk); //(2) | ... | The root cause is that the sock is set to null before dereference site (1) or (2). Therefore, this patch extracts the ax25_cb->sock in advance, and uses ax25_list_lock to protect it, which can synchronize with ax25_cb_del() and ensure the value of sock is not null before dereference sites. The concurrency UAF bug can be shown as below: ax25_kill_by_device() | ax25_release() | ax25_destroy_socket() ... | ... | sock_put(sk); //FREE lock_sock(s->sk); //(1) | s->ax25_dev = NULL; | ... release_sock(s->sk); //(2) | ... | The root cause is that the sock is released before dereference site (1) or (2). Therefore, this patch uses sock_hold() to increase the refcount of sock and uses ax25_list_lock to protect it, which can synchronize with ax25_cb_del() in ax25_destroy_socket() and ensure the sock wil not be released before dereference sites. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23selftests/zram: Adapt the situation that /dev/zram0 is being usedYang Xu
[ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ] If zram-generator package is installed and works, then we can not remove zram module because zram swap is being used. This case needs a clean zram environment, change this test by using hot_add/hot_remove interface. So even zram device is being used, we still can add zram device and remove them in cleanup. The two interface was introduced since kernel commit 6566d1a32bf7("zram: add dynamic device add/remove functionality") in v4.2-rc1. If kernel supports these two interface, we use hot_add/hot_remove to slove this problem, if not, just check whether zram is being used or built in, then skip it on old kernel. Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23selftests/zram01.sh: Fix compression ratio calculationYang Xu
[ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ] zram01 uses `free -m` to measure zram memory usage. The results are no sense because they are polluted by all running processes on the system. We Should only calculate the free memory delta for the current process. So use the third field of /sys/block/zram<id>/mm_stat to measure memory usage instead. The file is available since kernel 4.1. orig_data_size(first): uncompressed size of data stored in this disk. compr_data_size(second): compressed size of data stored in this disk mem_used_total(third): the amount of memory allocated for this disk Also remove useless zram cleanup call in zram_fill_fs and so we don't need to cleanup zram twice if fails. Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23selftests/zram: Skip max_comp_streams interface on newer kernelYang Xu
[ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ] Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So skip it on newer kernel ie 4.7. The code that comparing kernel version is from xfstests testsuite ext4/053. Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23net: ieee802154: at86rf230: Stop leaking skb'sMiquel Raynal
[ Upstream commit e5ce576d45bf72fd0e3dc37eff897bfcc488f6a9 ] Upon error the ieee802154_xmit_complete() helper is not called. Only ieee802154_wake_queue() is called manually. In the Tx case we then leak the skb structure. Free the skb structure upon error before returning when appropriate. As the 'is_tx = 0' cannot be moved in the complete handler because of a possible race between the delay in switching to STATE_RX_AACK_ON and a new interrupt, we introduce an intermediate 'was_tx' boolean just for this purpose. There is no Fixes tag applying here, many changes have been made on this area and the issue kind of always existed. Suggested-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220125121426.848337-4-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23btrfs: send: in case of IO error log itDāvis Mosāns
commit 2e7be9db125a0bf940c5d65eb5c40d8700f738b5 upstream. Currently if we get IO error while doing send then we abort without logging information about which file caused issue. So log it to help with debugging. CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Dāvis Mosāns <davispuh@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23parisc: Fix sglist access in ccio-dma.cJohn David Anglin
commit d7da660cab47183cded65e11b64497d0f56c6edf upstream. This patch implements the same bug fix to ccio-dma.c as to sba_iommu.c. It ensures that only the allocated entries of the sglist are accessed. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23parisc: Fix data TLB miss in sba_unmap_sgJohn David Anglin
commit b7d6f44a0fa716a82969725516dc0b16bc7cd514 upstream. Rolf Eike Beer reported the following bug: [1274934.746891] Bad Address (null pointer deref?): Code=15 (Data TLB miss fault) at addr 0000004140000018 [1274934.746891] CPU: 3 PID: 5549 Comm: cmake Not tainted 5.15.4-gentoo-parisc64 #4 [1274934.746891] Hardware name: 9000/785/C8000 [1274934.746891] [1274934.746891] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [1274934.746891] PSW: 00001000000001001111111000001110 Not tainted [1274934.746891] r00-03 000000ff0804fe0e 0000000040bc9bc0 00000000406760e4 0000004140000000 [1274934.746891] r04-07 0000000040b693c0 0000004140000000 000000004a2b08b0 0000000000000001 [1274934.746891] r08-11 0000000041f98810 0000000000000000 000000004a0a7000 0000000000000001 [1274934.746891] r12-15 0000000040bddbc0 0000000040c0cbc0 0000000040bddbc0 0000000040bddbc0 [1274934.746891] r16-19 0000000040bde3c0 0000000040bddbc0 0000000040bde3c0 0000000000000007 [1274934.746891] r20-23 0000000000000006 000000004a368950 0000000000000000 0000000000000001 [1274934.746891] r24-27 0000000000001fff 000000000800000e 000000004a1710f0 0000000040b693c0 [1274934.746891] r28-31 0000000000000001 0000000041f988b0 0000000041f98840 000000004a171118 [1274934.746891] sr00-03 00000000066e5800 0000000000000000 0000000000000000 00000000066e5800 [1274934.746891] sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [1274934.746891] [1274934.746891] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000406760e8 00000000406760ec [1274934.746891] IIR: 48780030 ISR: 0000000000000000 IOR: 0000004140000018 [1274934.746891] CPU: 3 CR30: 00000040e3a9c000 CR31: ffffffffffffffff [1274934.746891] ORIG_R28: 0000000040acdd58 [1274934.746891] IAOQ[0]: sba_unmap_sg+0xb0/0x118 [1274934.746891] IAOQ[1]: sba_unmap_sg+0xb4/0x118 [1274934.746891] RP(r2): sba_unmap_sg+0xac/0x118 [1274934.746891] Backtrace: [1274934.746891] [<00000000402740cc>] dma_unmap_sg_attrs+0x6c/0x70 [1274934.746891] [<000000004074d6bc>] scsi_dma_unmap+0x54/0x60 [1274934.746891] [<00000000407a3488>] mptscsih_io_done+0x150/0xd70 [1274934.746891] [<0000000040798600>] mpt_interrupt+0x168/0xa68 [1274934.746891] [<0000000040255a48>] __handle_irq_event_percpu+0xc8/0x278 [1274934.746891] [<0000000040255c34>] handle_irq_event_percpu+0x3c/0xd8 [1274934.746891] [<000000004025ecb4>] handle_percpu_irq+0xb4/0xf0 [1274934.746891] [<00000000402548e0>] generic_handle_irq+0x50/0x70 [1274934.746891] [<000000004019a254>] call_on_stack+0x18/0x24 [1274934.746891] [1274934.746891] Kernel panic - not syncing: Bad Address (null pointer deref?) The bug is caused by overrunning the sglist and incorrectly testing sg_dma_len(sglist) before nents. Normally this doesn't cause a crash, but in this case sglist crossed a page boundary. This occurs in the following code: while (sg_dma_len(sglist) && nents--) { The fix is simply to test nents first and move the decrement of nents into the loop. Reported-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23serial: parisc: GSC: fix build when IOSAPIC is not setRandy Dunlap
commit 6e8793674bb0d1135ca0e5c9f7e16fecbf815926 upstream. There is a build error when using a kernel .config file from 'kernel test robot' for a different build problem: hppa64-linux-ld: drivers/tty/serial/8250/8250_gsc.o: in function `.LC3': (.data.rel.ro+0x18): undefined reference to `iosapic_serial_irq' when: CONFIG_GSC=y CONFIG_SERIO_GSCPS2=y CONFIG_SERIAL_8250_GSC=y CONFIG_PCI is not set and hence PCI_LBA is not set. IOSAPIC depends on PCI_LBA, so IOSAPIC is not set/enabled. Make the use of iosapic_serial_irq() conditional to fix the build error. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-serial@vger.kernel.org Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Johan Hovold <johan@kernel.org> Suggested-by: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixupJann Horn
commit 57bc3d3ae8c14df3ceb4e17d26ddf9eeab304581 upstream. ax88179_rx_fixup() contains several out-of-bounds accesses that can be triggered by a malicious (or defective) USB device, in particular: - The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds, causing OOB reads and (on big-endian systems) OOB endianness flips. - A packet can overlap the metadata array, causing a later OOB endianness flip to corrupt data used by a cloned SKB that has already been handed off into the network stack. - A packet SKB can be constructed whose tail is far beyond its end, causing out-of-bounds heap data to be considered part of the SKB's data. I have tested that this can be used by a malicious USB device to send a bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response that contains random kernel heap data. It's probably also possible to get OOB writes from this on a little-endian system somehow - maybe by triggering skb_cow() via IP options processing -, but I haven't tested that. Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Cc: stable@kernel.org Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23Makefile.extrawarn: Move -Wunaligned-access to W=1Nathan Chancellor
commit 1cf5f151d25fcca94689efd91afa0253621fb33a upstream. -Wunaligned-access is a new warning in clang that is default enabled for arm and arm64 under certain circumstances within the clang frontend (see LLVM commit below). On v5.17-rc2, an ARCH=arm allmodconfig build shows 1284 total/70 unique instances of this warning (most of the instances are in header files), which is quite noisy. To keep a normal build green through CONFIG_WERROR, only show this warning with W=1, which will allow automated build systems to catch new instances of the warning so that the total number can be driven down to zero eventually since catching unaligned accesses at compile time would be generally useful. Cc: stable@vger.kernel.org Link: https://github.com/llvm/llvm-project/commit/35737df4dcd28534bd3090157c224c19b501278a Link: https://github.com/ClangBuiltLinux/linux/issues/1569 Link: https://github.com/ClangBuiltLinux/linux/issues/1576 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> [nathan: Fix conflict due to lack of afe956c577b2d] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16Linux 4.9.302v4.9.302Greg Kroah-Hartman
Link: https://lore.kernel.org/r/20220214092445.946718557@linuxfoundation.org Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Slade Watkins <slade@sladewatkins.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16HID: wacom: add USB_HID dependencyArnd Bergmann
commit 9d14201c7444bbdf89413e88d91b73150c3de38b upstream. The driver has gained a compile-time dependency that we should express in Kconfig to avoid this link error: drivers/hid/wacom_sys.o: In function `wacom_parse_and_register': wacom_sys.c:(.text+0x2eec): undefined reference to `usb_hid_driver' Fixes: 09dc28acaec7 ("HID: wacom: Improve generic name generation") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Jason Self <jason@bluehome.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16hwmon: (dell-smm) Speed up setting of fan speedArmin Wolf
commit c0d79987a0d82671bff374c07f2201f9bdf4aaa2 upstream. When setting the fan speed, i8k_set_fan() calls i8k_get_fan_status(), causing an unnecessary SMM call since from the two users of this function, only i8k_ioctl_unlocked() needs to know the new fan status while dell_smm_write() ignores the new fan status. Since SMM calls can be very slow while also making error reporting difficult for dell_smm_write(), remove the function call from i8k_set_fan() and call it separately in i8k_ioctl_unlocked(). Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211021190531.17379-6-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16USB: serial: cp210x: add CPI Bulk Coin Recycler idJohan Hovold
commit 6ca0c6283340d819bf9c7d8e76be33c9fbd903ab upstream. Add the device id for the Crane Payment Innovation / Money Controls Bulk Coin Recycler: https://www.cranepi.com/en/system/files/Support/OM_BCR_EN_V1-04_0.pdf Reported-by: Scott Russell <Scott.Russell2@ncr.com> Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16USB: serial: cp210x: add NCR Retail IO box idJohan Hovold
commit b50f8f09c622297d3cf46e332e17ba8adedec9af upstream. Add the device id for NCR's Retail IO box (CP2105) used in NCR FastLane SelfServ Checkout - R6C: https://www.ncr.com/product-catalog/ncr-fastlane-selfserv-checkout-r6c Reported-by: Scott Russell <Scott.Russell2@ncr.com> Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16USB: serial: ch341: add support for GW Instek USB2.0-Serial devicesStephan Brunner
commit fa77ce201f7f2d823b07753575122d1ae5597fbe upstream. Programmable lab power supplies made by GW Instek, such as the GPP-2323, have a USB port exposing a serial port to control the device. Stringing the supplied Windows driver, references to the ch341 chip are found. Binding the existing ch341 driver to the VID/PID of the GPP-2323 ("GW Instek USB2.0-Serial" as per the USB product name) works out of the box, communication and control is now possible. This patch should work with any GPP series power supply due to similarities in the product line. Signed-off-by: Stephan Brunner <s.brunner@stephan-brunner.net> Link: https://lore.kernel.org/r/4a47b864-0816-6f6a-efee-aa20e74bcdc6@stephan-brunner.net Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16USB: serial: option: add ZTE MF286D modemPawel Dembicki
commit d48384c7ed6c8fe4727eaa0f3048f62afd1cd715 upstream. Modem from ZTE MF286D is an Qualcomm MDM9250 based 3G/4G modem. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=19d2 ProdID=1485 Rev=52.87 S: Manufacturer=ZTE,Incorporated S: Product=ZTE Technologies MSM S: SerialNumber=MF286DZTED000000 C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=896mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320Cameron Williams
commit fbb9b194e15a63c56c5664e76ccd0e85c6100cea upstream. This patch adds support for the Brainboxes US-159, US-235 and US-320 USB-to-Serial devices. Signed-off-by: Cameron Williams <cang1@live.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16usb: gadget: rndis: check size of RNDIS_MSG_SET commandGreg Kroah-Hartman
commit 38ea1eac7d88072bbffb630e2b3db83ca649b826 upstream. Check the size of the RNDIS_MSG_SET command given to us before attempting to respond to an invalid message size. Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com> Cc: stable@kernel.org Tested-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16USB: gadget: validate interface OS descriptor requestsSzymon Heidrich
commit 75e5b4849b81e19e9efe1654b30d7f3151c33c2c upstream. Stall the control endpoint in case provided index exceeds array size of MAX_CONFIG_INTERFACES or when the retrieved function pointer is null. Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16usb: dwc3: gadget: Prevent core from processing stale TRBsUdipto Goswami
commit 117b4e96c7f362eb6459543883fc07f77662472c upstream. With CPU re-ordering on write instructions, there might be a chance that the HWO is set before the TRB is updated with the new mapped buffer address. And in the case where core is processing a list of TRBs it is possible that it fetched the TRBs when the HWO is set but before the buffer address is updated. Prevent this by adding a memory barrier before the HWO is updated to ensure that the core always process the updated TRBs. Fixes: f6bafc6a1c9d ("usb: dwc3: convert TRBs into bitshifts") Cc: stable <stable@vger.kernel.org> Reviewed-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com> Link: https://lore.kernel.org/r/1644207958-18287-1-git-send-email-quic_ugoswami@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16n_tty: wake up poll(POLLRDNORM) on receiving dataTATSUKAWA KOSUKE (立川 江介)
commit c816b2e65b0e86b95011418cad334f0524fc33b8 upstream. The poll man page says POLLRDNORM is equivalent to POLLIN when used as an event. $ man poll <snip> POLLRDNORM Equivalent to POLLIN. However, in n_tty driver, POLLRDNORM does not return until timeout even if there is terminal input, whereas POLLIN returns. The following test program works until kernel-3.17, but the test stops in poll() after commit 57087d515441 ("tty: Fix spurious poll() wakeups"). [Steps to run test program] $ cc -o test-pollrdnorm test-pollrdnorm.c $ ./test-pollrdnorm foo <-- Type in something from the terminal followed by [RET]. The string should be echoed back. ------------------------< test-pollrdnorm.c >------------------------ #include <stdio.h> #include <errno.h> #include <poll.h> #include <unistd.h> void main(void) { int n; unsigned char buf[8]; struct pollfd fds[1] = {{ 0, POLLRDNORM, 0 }}; n = poll(fds, 1, -1); if (n < 0) perror("poll"); n = read(0, buf, 8); if (n < 0) perror("read"); if (n > 0) write(1, buf, n); } ------------------------------------------------------------------------ The attached patch fixes this problem. Many calls to wake_up_interruptible_poll() in the kernel source code already specify "POLLIN | POLLRDNORM". Fixes: 57087d515441 ("tty: Fix spurious poll() wakeups") Cc: stable@vger.kernel.org Signed-off-by: Kosuke Tatsukawa <tatsu-ab1@nec.com> Link: https://lore.kernel.org/r/TYCPR01MB81901C0F932203D30E452B3EA5209@TYCPR01MB8190.jpnprd01.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16bpf: Add kconfig knob for disabling unpriv bpf by defaultDaniel Borkmann
commit 08389d888287c3823f80b0216766b71e17f0aba5 upstream. Add a kconfig knob which allows for unprivileged bpf to be disabled by default. If set, the knob sets /proc/sys/kernel/unprivileged_bpf_disabled to value of 2. This still allows a transition of 2 -> {0,1} through an admin. Similarly, this also still keeps 1 -> {1} behavior intact, so that once set to permanently disabled, it cannot be undone aside from a reboot. We've also added extra2 with max of 2 for the procfs handler, so that an admin still has a chance to toggle between 0 <-> 2. Either way, as an additional alternative, applications can make use of CAP_BPF that we added a while ago. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/74ec548079189e4e4dffaeb42b8987bb3c852eee.1620765074.git.daniel@iogearbox.net [fllinden@amazon.com: backported to 4.9] Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16vt_ioctl: add array_index_nospec to VT_ACTIVATEJakob Koschel
commit 28cb138f559f8c1a1395f5564f86b8bbee83631b upstream. in vt_setactivate an almost identical code path has been patched with array_index_nospec. In the VT_ACTIVATE path the user input is from a system call argument instead of a usercopy. For consistency both code paths should have the same mitigations applied. Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU Amsterdam. Co-developed-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com> Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com> Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220127144406.3589293-2-jakobkoschel@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16vt_ioctl: fix array_index_nospec in vt_setactivateJakob Koschel
commit 61cc70d9e8ef5b042d4ed87994d20100ec8896d9 upstream. array_index_nospec ensures that an out-of-bounds value is set to zero on the transient path. Decreasing the value by one afterwards causes a transient integer underflow. vsa.console should be decreased first and then sanitized with array_index_nospec. Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU Amsterdam. Co-developed-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com> Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com> Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220127144406.3589293-1-jakobkoschel@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-19 05:54:08 +0000