summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-26kconfig: qconf: do not limit the pop-up menu to the first rowMasahiro Yamada
[ Upstream commit fa8de0a3bf3c02e6f00b7746e7e934db522cdda9 ] If you right-click the first row in the option tree, the pop-up menu shows up, but if you right-click the second row or below, the event is ignored due to the following check: if (e->y() <= header()->geometry().bottom()) { Perhaps, the intention was to show the pop-menu only when the tree header was right-clicked, but this handler is not called in that case. Since the origin of e->y() starts from the bottom of the header, this check is odd. Going forward, you can right-click anywhere in the tree to get the pop-up menu. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26Revert "scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe"Quinn Tran
[ Upstream commit dca93232b361d260413933903cd4bdbd92ebcc7f ] FCP T10-PI and NVMe features are independent of each other. This patch allows both features to co-exist. This reverts commit 5da05a26b8305a625bc9d537671b981795b46dab. Link: https://lore.kernel.org/r/20200806111014.28434-12-njavali@marvell.com Fixes: 5da05a26b830 ("scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE modeJim Mattson
[ Upstream commit cb957adb4ea422bd758568df5b2478ea3bb34f35 ] See the SDM, volume 3, section 4.4.1: If PAE paging would be in use following an execution of MOV to CR0 or MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then the PDPTEs are loaded from the address in CR3. Fixes: b9baba8614890 ("KVM, pkeys: expose CPUID/CR4 to guest") Cc: Huaitong Han <huaitong.han@intel.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Message-Id: <20200817181655.3716509-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE modeJim Mattson
[ Upstream commit 427890aff8558eb4326e723835e0eae0e6fe3102 ] See the SDM, volume 3, section 4.4.1: If PAE paging would be in use following an execution of MOV to CR0 or MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then the PDPTEs are loaded from the address in CR3. Fixes: 0be0226f07d14 ("KVM: MMU: fix SMAP virtualization") Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Message-Id: <20200817181655.3716509-2-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26vfio/type1: Add proper error unwind for vfio_iommu_replay()Alex Williamson
[ Upstream commit aae7a75a821a793ed6b8ad502a5890fb8e8f172d ] The vfio_iommu_replay() function does not currently unwind on error, yet it does pin pages, perform IOMMU mapping, and modify the vfio_dma structure to indicate IOMMU mapping. The IOMMU mappings are torn down when the domain is destroyed, but the other actions go on to cause trouble later. For example, the iommu->domain_list can be empty if we only have a non-IOMMU backed mdev attached. We don't currently check if the list is empty before getting the first entry in the list, which leads to a bogus domain pointer. If a vfio_dma entry is erroneously marked as iommu_mapped, we'll attempt to use that bogus pointer to retrieve the existing physical page addresses. This is the scenario that uncovered this issue, attempting to hot-add a vfio-pci device to a container with an existing mdev device and DMA mappings, one of which could not be pinned, causing a failure adding the new group to the existing container and setting the conditions for a subsequent attempt to explode. To resolve this, we can first check if the domain_list is empty so that we can reject replay of a bogus domain, should we ever encounter this inconsistent state again in the future. The real fix though is to add the necessary unwind support, which means cleaning up the current pinning if an IOMMU mapping fails, then walking back through the r-b tree of DMA entries, reading from the IOMMU which ranges are mapped, and unmapping and unpinning those ranges. To be able to do this, we also defer marking the DMA entry as IOMMU mapped until all entries are processed, in order to allow the unwind to know the disposition of each entry. Fixes: a54eb55045ae ("vfio iommu type1: Add support for mediated devices") Reported-by: Zhiyi Guo <zhguo@redhat.com> Tested-by: Zhiyi Guo <zhguo@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26ASoC: intel: Fix memleak in sst_media_openDinghao Liu
[ Upstream commit 062fa09f44f4fb3776a23184d5d296b0c8872eb9 ] When power_up_sst() fails, stream needs to be freed just like when try_module_get() fails. However, current code is returning directly and ends up leaking memory. Fixes: 0121327c1a68b ("ASoC: Intel: mfld-pcm: add control for powering up/down dsp") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200813084112.26205-1-dinghao.liu@zju.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26ASoC: msm8916-wcd-analog: fix register Interrupt offsetSrinivas Kandagatla
[ Upstream commit ff69c97ef84c9f7795adb49e9f07c9adcdd0c288 ] For some reason interrupt set and clear register offsets are not set correctly. This patch corrects them! Fixes: 585e881e5b9e ("ASoC: codecs: Add msm8916-wcd analog codec") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200811103452.20448-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26s390/ptrace: fix storage key handlingHeiko Carstens
[ Upstream commit fd78c59446b8d050ecf3e0897c5a486c7de7c595 ] The key member of the runtime instrumentation control block contains only the access key, not the complete storage key. Therefore the value must be shifted by four bits. Since existing user space does not necessarily query and set the access key correctly, just ignore the user space provided key and use the correct one. Note: this is only relevant for debugging purposes in case somebody compiles a kernel with a default storage access key set to a value not equal to zero. Fixes: 262832bc5acd ("s390/ptrace: add runtime instrumention register get/set") Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26s390/runtime_instrumentation: fix storage key handlingHeiko Carstens
[ Upstream commit 9eaba29c7985236e16468f4e6a49cc18cf01443e ] The key member of the runtime instrumentation control block contains only the access key, not the complete storage key. Therefore the value must be shifted by four bits. Note: this is only relevant for debugging purposes in case somebody compiles a kernel with a default storage access key set to a value not equal to zero. Fixes: e4b8b3f33fca ("s390: add support for runtime instrumentation") Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26bonding: fix a potential double-unregisterCong Wang
[ Upstream commit 832707021666411d04795c564a4adea5d6b94f17 ] When we tear down a network namespace, we unregister all the netdevices within it. So we may queue a slave device and a bonding device together in the same unregister queue. If the only slave device is non-ethernet, it would automatically unregister the bonding device as well. Thus, we may end up unregistering the bonding device twice. Workaround this special case by checking reg_state. Fixes: 9b5e383c11b0 ("net: Introduce unregister_netdevice_many()") Reported-by: syzbot+af23e7f3e0a7e10c8b67@syzkaller.appspotmail.com Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26can: j1939: add rxtimer for multipacket broadcast sessionZhang Changzhong
[ Upstream commit 0ae18a82686f9b9965a8ce0dd81371871b306ffe ] According to SAE J1939/21 (Chapter 5.12.3 and APPENDIX C), for transmit side the required time interval between packets of a multipacket broadcast message is 50 to 200 ms, the responder shall use a timeout of 250ms (provides margin allowing for the maximumm spacing of 200ms). For receive side a timeout will occur when a time of greater than 750 ms elapsed between two message packets when more packets were expected. So this patch fix and add rxtimer for multipacket broadcast session. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1596599425-5534-5-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26can: j1939: abort multipacket broadcast session when timeout occursZhang Changzhong
[ Upstream commit 2b8b2e31555cf55ba3680fb28e2b382e168d7ea1 ] If timeout occurs, j1939_tp_rxtimer() first calls hrtimer_start() to restart rxtimer, and then calls __j1939_session_cancel() to set session->state = J1939_SESSION_WAITING_ABORT. At next timeout expiration, because of the J1939_SESSION_WAITING_ABORT session state j1939_tp_rxtimer() will call j1939_session_deactivate_activate_next() to deactivate current session, and rxtimer won't be set. But for multipacket broadcast session, __j1939_session_cancel() don't set session->state = J1939_SESSION_WAITING_ABORT, thus current session won't be deactivate and hrtimer_start() is called to start new rxtimer again and again. So fix it by moving session->state = J1939_SESSION_WAITING_ABORT out of if (!j1939_cb_is_broadcast(&session->skcb)) statement. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1596599425-5534-4-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26can: j1939: cancel rxtimer on multipacket broadcast session completeZhang Changzhong
[ Upstream commit e8b17653088f28a87c81845fa41a2d295a3b458c ] If j1939_xtp_rx_dat_one() receive last frame of multipacket broadcast message, j1939_session_timers_cancel() should be called to cancel rxtimer. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1596599425-5534-3-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26can: j1939: fix support for multipacket broadcast messageZhang Changzhong
[ Upstream commit f4fd77fd87e9b214c26bb2ebd4f90055eaea5ade ] Currently j1939_tp_im_involved_anydir() in j1939_tp_recv() check the previously set flags J1939_ECU_LOCAL_DST and J1939_ECU_LOCAL_SRC of incoming skb, thus multipacket broadcast message was aborted by receive side because it may come from remote ECUs and have no exact dst address. Similarly, j1939_tp_cmd_recv() and j1939_xtp_rx_dat() didn't process broadcast message. So fix it by checking and process broadcast message in j1939_tp_recv(), j1939_tp_cmd_recv() and j1939_xtp_rx_dat(). Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1596599425-5534-2-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26bonding: show saner speed for broadcast modeJarod Wilson
[ Upstream commit 4ca0d9ac3fd8f9f90b72a15d8da2aca3ffb58418 ] Broadcast mode bonds transmit a copy of all traffic simultaneously out of all interfaces, so the "speed" of the bond isn't really the aggregate of all interfaces, but rather, the speed of the slowest active interface. Also, the type of the speed field is u32, not unsigned long, so adjust that accordingly, as required to make min() function here without complaining about mismatching types. Fixes: bb5b052f751b ("bond: add support to read speed and duplex via ethtool") CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26net: fec: correct the error path for regulator disable in probeFugang Duan
[ Upstream commit c6165cf0dbb82ded90163dce3ac183fc7a913dc4 ] Correct the error path for regulator disable. Fixes: 9269e5560b26 ("net: fec: add phy-reset-gpios PROBE_DEFER check") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26i40e: Fix crash during removing i40e driverGrzegorz Szczurek
[ Upstream commit 5b6d4a7f20b09c47ca598760f6dafd554af8b6d5 ] Fix the reason of crashing system by add waiting time to finish reset recovery process before starting remove driver procedure. Now VSI is releasing if VSI is not in reset recovery mode. Without this fix it was possible to start remove driver if other processing command need reset recovery procedure which resulted in null pointer dereference. VSI used by the ethtool process has been cleared by remove driver process. [ 6731.508665] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 6731.508668] #PF: supervisor read access in kernel mode [ 6731.508670] #PF: error_code(0x0000) - not-present page [ 6731.508671] PGD 0 P4D 0 [ 6731.508674] Oops: 0000 [#1] SMP PTI [ 6731.508679] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0021.032120170601 03/21/2017 [ 6731.508694] RIP: 0010:i40e_down+0x252/0x310 [i40e] [ 6731.508696] Code: c7 78 de fa c0 e8 61 02 3a c1 66 83 bb f6 0c 00 00 00 0f 84 bf 00 00 00 45 31 e4 45 31 ff eb 03 41 89 c7 48 8b 83 98 0c 00 00 <4a> 8b 3c 20 e8 a5 79 02 00 48 83 bb d0 0c 00 00 00 74 10 48 8b 83 [ 6731.508698] RSP: 0018:ffffb75ac7b3faf0 EFLAGS: 00010246 [ 6731.508700] RAX: 0000000000000000 RBX: ffff9c9874bd5000 RCX: 0000000000000007 [ 6731.508701] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff9c987f4d9780 [ 6731.508703] RBP: ffffb75ac7b3fb30 R08: 0000000000005b60 R09: 0000000000000004 [ 6731.508704] R10: ffffb75ac64fbd90 R11: 0000000000000001 R12: 0000000000000000 [ 6731.508706] R13: ffff9c97a08e0000 R14: ffff9c97a08e0a68 R15: 0000000000000000 [ 6731.508708] FS: 00007f2617cd2740(0000) GS:ffff9c987f4c0000(0000) knlGS:0000000000000000 [ 6731.508710] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6731.508711] CR2: 0000000000000000 CR3: 0000001e765c4006 CR4: 00000000003606e0 [ 6731.508713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6731.508714] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 6731.508715] Call Trace: [ 6731.508734] i40e_vsi_close+0x84/0x90 [i40e] [ 6731.508742] i40e_quiesce_vsi.part.98+0x3c/0x40 [i40e] [ 6731.508749] i40e_pf_quiesce_all_vsi+0x55/0x60 [i40e] [ 6731.508757] i40e_prep_for_reset+0x59/0x130 [i40e] [ 6731.508765] i40e_reconfig_rss_queues+0x5a/0x120 [i40e] [ 6731.508774] i40e_set_channels+0xda/0x170 [i40e] [ 6731.508778] ethtool_set_channels+0xe9/0x150 [ 6731.508781] dev_ethtool+0x1b94/0x2920 [ 6731.508805] dev_ioctl+0xc2/0x590 [ 6731.508811] sock_do_ioctl+0xae/0x150 [ 6731.508813] sock_ioctl+0x34f/0x3c0 [ 6731.508821] ksys_ioctl+0x98/0xb0 [ 6731.508828] __x64_sys_ioctl+0x1a/0x20 [ 6731.508831] do_syscall_64+0x57/0x1c0 [ 6731.508835] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 4b8164467b85 ("i40e: Add common function for finding VSI by type") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26i40e: Set RX_ONLY mode for unicast promiscuous on VLANPrzemyslaw Patynowski
[ Upstream commit 4bd5e02a2ed1575c2f65bd3c557a077dd399f0e8 ] Trusted VF with unicast promiscuous mode set, could listen to TX traffic of other VFs. Set unicast promiscuous mode to RX traffic, if VSI has port VLAN configured. Rename misleading I40E_AQC_SET_VSI_PROMISC_TX bit to I40E_AQC_SET_VSI_PROMISC_RX_ONLY. Aligned unicast promiscuous with VLAN to the one without VLAN. Fixes: 6c41a7606967 ("i40e: Add promiscuous on VLAN support") Fixes: 3b1200891b7f ("i40e: When in promisc mode apply promisc mode to Tx Traffic as well") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26can: j1939: transport: add j1939_session_skb_find_by_offset() functionOleksij Rempel
[ Upstream commit 840835c9281215341d84966a8855f267a971e6a3 ] Sometimes it makes no sense to search the skb by pkt.dpo, since we need next the skb within the transaction block. This may happen if we have an ETP session with CTS set to less than 255 packets. After this patch, we will be able to work with ETP sessions where the block size (ETP.CM_CTS byte 2) is less than 255 packets. Reported-by: Henrique Figueira <henrislip@gmail.com> Reported-by: https://github.com/linux-can/can-utils/issues/228 Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20200807105200.26441-5-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26can: j1939: transport: j1939_simple_recv(): ignore local J1939 messages send ↵Oleksij Rempel
not by J1939 stack [ Upstream commit b43e3a82bc432c1caaed8950e7662c143470c54c ] In current J1939 stack implementation, we process all locally send messages as own messages. Even if it was send by CAN_RAW socket. To reproduce it use following commands: testj1939 -P -r can0:0x80 & cansend can0 18238040#0123 This step will trigger false positive not critical warning: j1939_simple_recv: Received already invalidated message With this patch we add additional check to make sure, related skb is own echo message. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20200807105200.26441-2-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26can: j1939: fix kernel-infoleak in j1939_sk_sock2sockaddr_can()Eric Dumazet
[ Upstream commit 38ba8b9241f5848a49b80fddac9ab5f4692e434e ] syzbot found that at least 2 bytes of kernel information were leaked during getsockname() on AF_CAN CAN_J1939 socket. Since struct sockaddr_can has in fact two holes, simply clear the whole area before filling it with useful data. BUG: KMSAN: kernel-infoleak in kmsan_copy_to_user+0x81/0x90 mm/kmsan/kmsan_hooks.c:253 CPU: 0 PID: 8466 Comm: syz-executor511 Not tainted 5.8.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 kmsan_internal_check_memory+0x238/0x3d0 mm/kmsan/kmsan.c:423 kmsan_copy_to_user+0x81/0x90 mm/kmsan/kmsan_hooks.c:253 instrument_copy_to_user include/linux/instrumented.h:91 [inline] _copy_to_user+0x18e/0x260 lib/usercopy.c:39 copy_to_user include/linux/uaccess.h:186 [inline] move_addr_to_user+0x3de/0x670 net/socket.c:237 __sys_getsockname+0x407/0x5e0 net/socket.c:1909 __do_sys_getsockname net/socket.c:1920 [inline] __se_sys_getsockname+0x91/0xb0 net/socket.c:1917 __x64_sys_getsockname+0x4a/0x70 net/socket.c:1917 do_syscall_64+0xad/0x160 arch/x86/entry/common.c:386 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x440219 Code: Bad RIP value. RSP: 002b:00007ffe5ee150c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000033 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440219 RDX: 0000000020000240 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401a20 R13: 0000000000401ab0 R14: 0000000000000000 R15: 0000000000000000 Local variable ----address@__sys_getsockname created at: __sys_getsockname+0x91/0x5e0 net/socket.c:1894 __sys_getsockname+0x91/0x5e0 net/socket.c:1894 Bytes 2-3 of 24 are uninitialized Memory access of size 24 starts at ffff8880ba2c7de8 Data copied to user address 0000000020000100 Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: linux-can@vger.kernel.org Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20200813161834.4021638-1-edumazet@google.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26bpf: sock_ops sk access may stomp registers when dst_reg = src_regJohn Fastabend
[ Upstream commit 84f44df664e9f0e261157e16ee1acd77cc1bb78d ] Similar to patch ("bpf: sock_ops ctx access may stomp registers") if the src_reg = dst_reg when reading the sk field of a sock_ops struct we generate xlated code, 53: (61) r9 = *(u32 *)(r9 +28) 54: (15) if r9 == 0x0 goto pc+3 56: (79) r9 = *(u64 *)(r9 +0) This stomps on the r9 reg to do the sk_fullsock check and then when reading the skops->sk field instead of the sk pointer we get the sk_fullsock. To fix use similar pattern noted in the previous fix and use the temp field to save/restore a register used to do sk_fullsock check. After the fix the generated xlated code reads, 52: (7b) *(u64 *)(r9 +32) = r8 53: (61) r8 = *(u32 *)(r9 +28) 54: (15) if r9 == 0x0 goto pc+3 55: (79) r8 = *(u64 *)(r9 +32) 56: (79) r9 = *(u64 *)(r9 +0) 57: (05) goto pc+1 58: (79) r8 = *(u64 *)(r9 +32) Here r9 register was in-use so r8 is chosen as the temporary register. In line 52 r8 is saved in temp variable and at line 54 restored in case fullsock != 0. Finally we handle fullsock == 0 case by restoring at line 58. This adds a new macro SOCK_OPS_GET_SK it is almost possible to merge this with SOCK_OPS_GET_FIELD, but I found the extra branch logic a bit more confusing than just adding a new macro despite a bit of duplicating code. Fixes: 1314ef561102e ("bpf: export bpf_sock for BPF_PROG_TYPE_SOCK_OPS prog type") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/159718349653.4728.6559437186853473612.stgit@john-Precision-5820-Tower Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26ASoC: q6routing: add dummy register read/write functionSrinivas Kandagatla
[ Upstream commit 796a58fe2b8c9b6668db00d92512ec84be663027 ] Most of the DAPM widgets for DSP ASoC components reuse reg field of the widgets for its internal calculations, however these are not real registers. So read/writes to these numbers are not really valid. However ASoC core will read these registers to get default state during startup. With recent changes to ASoC core, every register read/write failures are reported very verbosely. Prior to this fails to reads are totally ignored, so we never saw any error messages. To fix this add dummy read/write function to return default value. Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver") Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200811120205.21805-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26ASoC: q6afe-dai: mark all widgets registers as SND_SOC_NOPMSrinivas Kandagatla
[ Upstream commit 56235e4bc5ae58cb8fcd9314dba4e9ab077ddda8 ] Looks like the q6afe-dai dapm widget registers are set as "0", which is a not correct. As this registers will be read by ASoC core during startup which will throw up errors, Fix this by making the registers as SND_SOC_NOPM as these should be never used. With recent changes to ASoC core, every register read/write failures are reported very verbosely. Prior to this fails to reads are totally ignored, so we never saw any error messages. Fixes: 24c4cbcfac09 ("ASoC: qdsp6: q6afe: Add q6afe dai driver") Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200811120205.21805-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26spi: stm32: fixes suspend/resume managementAmelie Delaunay
[ Upstream commit db96bf976a4fc65439be0b4524c0d41427d98814 ] This patch adds pinctrl power management, and reconfigure spi controller in case of resume. Fixes: 038ac869c9d2 ("spi: stm32: add runtime PM support") Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alain Volmat <alain.volmat@st.com> Link: https://lore.kernel.org/r/1597043558-29668-5-git-send-email-alain.volmat@st.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26netfilter: nf_tables: nft_exthdr: the presence return value should be ↵Stephen Suryaputra
little-endian [ Upstream commit b428336676dbca363262cc134b6218205df4f530 ] On big-endian machine, the returned register data when the exthdr is present is not being compared correctly because little-endian is assumed. The function nft_cmp_fast_mask(), called by nft_cmp_fast_eval() and nft_cmp_fast_init(), calls cpu_to_le32(). The following dump also shows that little endian is assumed: $ nft --debug=netlink add rule ip recordroute forward ip option rr exists counter ip [ exthdr load ipv4 1b @ 7 + 0 present => reg 1 ] [ cmp eq reg 1 0x01000000 ] [ counter pkts 0 bytes 0 ] Lastly, debug print in nft_cmp_fast_init() and nft_cmp_fast_eval() when RR option exists in the packet shows that the comparison fails because the assumption: nft_cmp_fast_init:189 priv->sreg=4 desc.len=8 mask=0xff000000 data.data[0]=0x10003e0 nft_cmp_fast_eval:57 regs->data[priv->sreg=4]=0x1 mask=0xff000000 priv->data=0x1000000 v2: use nft_reg_store8() instead (Florian Westphal). Also to avoid the warnings reported by kernel test robot. Fixes: dbb5281a1f84 ("netfilter: nf_tables: add support for matching IPv4 options") Fixes: c078ca3b0c5b ("netfilter: nft_exthdr: Add support for existence check") Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26ext4: don't allow overlapping system zonesJan Kara
[ Upstream commit bf9a379d0980e7413d94cb18dac73db2bfc5f470 ] Currently, add_system_zone() just silently merges two added system zones that overlap. However the overlap should not happen and it generally suggests that some unrelated metadata overlap which indicates the fs is corrupted. We should have caught such problems earlier (e.g. in ext4_check_descriptors()) but add this check as another line of defense. In later patch we also use this for stricter checking of journal inode extent tree. Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200728130437.7804-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26ext4: fix potential negative array index in do_split()Eric Sandeen
[ Upstream commit 5872331b3d91820e14716632ebb56b1399b34fe1 ] If for any reason a directory passed to do_split() does not have enough active entries to exceed half the size of the block, we can end up iterating over all "count" entries without finding a split point. In this case, count == move, and split will be zero, and we will attempt a negative index into map[]. Guard against this by detecting this case, and falling back to split-to-half-of-count instead; in this case we will still have plenty of space (> half blocksize) in each split block. Fixes: ef2b02d3e617 ("ext34: ensure do_split leaves enough free space in both blocks") Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/f53e246b-647c-64bb-16ec-135383c70ad7@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26fs/signalfd.c: fix inconsistent return codes for signalfd4Helge Deller
[ Upstream commit a089e3fd5a82aea20f3d9ec4caa5f4c65cc2cfcc ] The kernel signalfd4() syscall returns different error codes when called either in compat or native mode. This behaviour makes correct emulation in qemu and testing programs like LTP more complicated. Fix the code to always return -in both modes- EFAULT for unaccessible user memory, and EINVAL when called with an invalid signal mask. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Laurent Vivier <laurent@vivier.eu> Link: http://lkml.kernel.org/r/20200530100707.GA10159@ls3530.fritz.box Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26alpha: fix annotation of io{read,write}{16,32}be()Luc Van Oostenryck
[ Upstream commit bd72866b8da499e60633ff28f8a4f6e09ca78efe ] These accessors must be used to read/write a big-endian bus. The value returned or written is native-endian. However, these accessors are defined using be{16,32}_to_cpu() or cpu_to_be{16,32}() to make the endian conversion but these expect a __be{16,32} when none is present. Keeping them would need a force cast that would solve nothing at all. So, do the conversion using swab{16,32}, like done in asm-generic for similar situations. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Link: http://lkml.kernel.org/r/20200622114232.80039-1-luc.vanoostenryck@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26xfs: Fix UBSAN null-ptr-deref in xfs_sysfs_initEiichi Tsukata
[ Upstream commit 96cf2a2c75567ff56195fe3126d497a2e7e4379f ] If xfs_sysfs_init is called with parent_kobj == NULL, UBSAN shows the following warning: UBSAN: null-ptr-deref in ./fs/xfs/xfs_sysfs.h:37:23 member access within null pointer of type 'struct xfs_kobj' Call Trace: dump_stack+0x10e/0x195 ubsan_type_mismatch_common+0x241/0x280 __ubsan_handle_type_mismatch_v1+0x32/0x40 init_xfs_fs+0x12b/0x28f do_one_initcall+0xdd/0x1d0 do_initcall_level+0x151/0x1b6 do_initcalls+0x50/0x8f do_basic_setup+0x29/0x2b kernel_init_freeable+0x19f/0x20b kernel_init+0x11/0x1e0 ret_from_fork+0x22/0x30 Fix it by checking parent_kobj before the code accesses its member. Signed-off-by: Eiichi Tsukata <devel@etsukata.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> [darrick: minor whitespace edits] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26tools/testing/selftests/cgroup/cgroup_util.c: cg_read_strcmp: fix null ↵Gaurav Singh
pointer dereference [ Upstream commit d830020656c5b68ced962ed3cb51a90e0a89d4c4 ] Haven't reproduced this issue. This PR is does a minor code cleanup. Signed-off-by: Gaurav Singh <gaurav1086@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Michal Koutn <mkoutny@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Chris Down <chris@chrisdown.name> Link: http://lkml.kernel.org/r/20200726013808.22242-1-gaurav1086@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26media: camss: fix memory leaks on error handling paths in probeEvgeny Novikov
[ Upstream commit f45882cfb152f5d3a421fd58f177f227e44843b9 ] camss_probe() does not free camss on error handling paths. The patch introduces an additional error label for this purpose. Besides, it removes call of v4l2_async_notifier_cleanup() from camss_of_parse_ports() since its caller, camss_probe(), cleans up all its resources itself. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Co-developed-by: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26virtio_ring: Avoid loop when vq is broken in virtqueue_pollMao Wenan
[ Upstream commit 481a0d7422db26fb63e2d64f0652667a5c6d0f3e ] The loop may exist if vq->broken is true, virtqueue_get_buf_ctx_packed or virtqueue_get_buf_ctx_split will return NULL, so virtnet_poll will reschedule napi to receive packet, it will lead cpu usage(si) to 100%. call trace as below: virtnet_poll virtnet_receive virtqueue_get_buf_ctx virtqueue_get_buf_ctx_packed virtqueue_get_buf_ctx_split virtqueue_napi_complete virtqueue_poll //return true virtqueue_napi_schedule //it will reschedule napi to fix this, return false if vq is broken in virtqueue_poll. Signed-off-by: Mao Wenan <wenan.mao@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/1596354249-96204-1-git-send-email-wenan.mao@linux.alibaba.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26scsi: libfc: Free skb in fc_disc_gpn_id_resp() for valid casesJaved Hasan
[ Upstream commit ec007ef40abb6a164d148b0dc19789a7a2de2cc8 ] In fc_disc_gpn_id_resp(), skb is supposed to get freed in all cases except for PTR_ERR. However, in some cases it didn't. This fix is to call fc_frame_free(fp) before function returns. Link: https://lore.kernel.org/r/20200729081824.30996-2-jhasan@marvell.com Reviewed-by: Girish Basrur <gbasrur@marvell.com> Reviewed-by: Santosh Vernekar <svernekar@marvell.com> Reviewed-by: Saurav Kashyap <skashyap@marvell.com> Reviewed-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26cpufreq: intel_pstate: Fix cpuinfo_max_freq when MSR_TURBO_RATIO_LIMIT is 0Srinivas Pandruvada
[ Upstream commit 4daca379c703ff55edc065e8e5173dcfeecf0148 ] The MSR_TURBO_RATIO_LIMIT can be 0. This is not an error. User can update this MSR via BIOS settings on some systems or can use msr tools to update. Also some systems boot with value = 0. This results in display of cpufreq/cpuinfo_max_freq wrong. This value will be equal to cpufreq/base_frequency, even though turbo is enabled. But platform will still function normally in HWP mode as we get max 1-core frequency from the MSR_HWP_CAPABILITIES. This MSR is already used to calculate cpu->pstate.turbo_freq, which is used for to set policy->cpuinfo.max_freq. But some other places cpu->pstate.turbo_pstate is used. For example to set policy->max. To fix this, also update cpu->pstate.turbo_pstate when updating cpu->pstate.turbo_freq. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26swiotlb-xen: use vmalloc_to_page on vmalloc virt addressesBoris Ostrovsky
[ Upstream commit 8b1e868f66076490189a36d984fcce286cdd6295 ] xen_alloc_coherent_pages might return pages for which virt_to_phys and virt_to_page don't work, e.g. ioremap'ed pages. So in xen_swiotlb_free_coherent we can't assume that virt_to_page works. Instead add a is_vmalloc_addr check and use vmalloc_to_page on vmalloc virt addresses. This patch fixes the following crash at boot on RPi4 (the underlying issue is not RPi4 specific): https://marc.info/?l=xen-devel&m=158862573216800 Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-1-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26ceph: fix use-after-free for fsc->mdscXiubo Li
[ Upstream commit a7caa88f8b72c136f9a401f498471b8a8e35370d ] If the ceph_mdsc_init() fails, it will free the mdsc already. Reported-by: syzbot+b57f46d8d6ea51960b8c@syzkaller.appspotmail.com Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26jffs2: fix UAF problemZhe Li
[ Upstream commit 798b7347e4f29553db4b996393caf12f5b233daf ] The log of UAF problem is listed below. BUG: KASAN: use-after-free in jffs2_rmdir+0xa4/0x1cc [jffs2] at addr c1f165fc Read of size 4 by task rm/8283 ============================================================================= BUG kmalloc-32 (Tainted: P B O ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in 0xbbbbbbbb age=3054364 cpu=0 pid=0 0xb0bba6ef jffs2_write_dirent+0x11c/0x9c8 [jffs2] __slab_alloc.isra.21.constprop.25+0x2c/0x44 __kmalloc+0x1dc/0x370 jffs2_write_dirent+0x11c/0x9c8 [jffs2] jffs2_do_unlink+0x328/0x5fc [jffs2] jffs2_rmdir+0x110/0x1cc [jffs2] vfs_rmdir+0x180/0x268 do_rmdir+0x2cc/0x300 ret_from_syscall+0x0/0x3c INFO: Freed in 0x205b age=3054364 cpu=0 pid=0 0x2e9173 jffs2_add_fd_to_list+0x138/0x1dc [jffs2] jffs2_add_fd_to_list+0x138/0x1dc [jffs2] jffs2_garbage_collect_dirent.isra.3+0x21c/0x288 [jffs2] jffs2_garbage_collect_live+0x16bc/0x1800 [jffs2] jffs2_garbage_collect_pass+0x678/0x11d4 [jffs2] jffs2_garbage_collect_thread+0x1e8/0x3b0 [jffs2] kthread+0x1a8/0x1b0 ret_from_kernel_thread+0x5c/0x64 Call Trace: [c17ddd20] [c02452d4] kasan_report.part.0+0x298/0x72c (unreliable) [c17ddda0] [d2509680] jffs2_rmdir+0xa4/0x1cc [jffs2] [c17dddd0] [c026da04] vfs_rmdir+0x180/0x268 [c17dde00] [c026f4e4] do_rmdir+0x2cc/0x300 [c17ddf40] [c001a658] ret_from_syscall+0x0/0x3c The root cause is that we don't get "jffs2_inode_info.sem" before we scan list "jffs2_inode_info.dents" in function jffs2_rmdir. This patch add codes to get "jffs2_inode_info.sem" before we scan "jffs2_inode_info.dents" to slove the UAF problem. Signed-off-by: Zhe Li <lizhe67@huawei.com> Reviewed-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26drm/ttm: fix offset in VMAs with a pg_offs in ttm_bo_vm_accessFelix Kuehling
[ Upstream commit c0001213d195d1bac83e0744c06ff06dd5a8ba53 ] VMAs with a pg_offs that's offset from the start of the vma_node need to adjust the offset within the BO accordingly. This matches the offset calculation in ttm_bo_vm_fault_reserved. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: Laurent Morichetti <laurent.morichetti@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/381169/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26xfs: fix inode quota reservation checksDarrick J. Wong
[ Upstream commit f959b5d037e71a4d69b5bf71faffa065d9269b4a ] xfs_trans_dqresv is the function that we use to make reservations against resource quotas. Each resource contains two counters: the q_core counter, which tracks resources allocated on disk; and the dquot reservation counter, which tracks how much of that resource has either been allocated or reserved by threads that are working on metadata updates. For disk blocks, we compare the proposed reservation counter against the hard and soft limits to decide if we're going to fail the operation. However, for inodes we inexplicably compare against the q_core counter, not the incore reservation count. Since the q_core counter is always lower than the reservation count and we unlock the dquot between reservation and transaction commit, this means that multiple threads can reserve the last inode count before we hit the hard limit, and when they commit, we'll be well over the hard limit. Fix this by checking against the incore inode reservation counter, since we would appear to maintain that correctly (and that's what we report in GETQUOTA). Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Collins <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26svcrdma: Fix another Receive buffer leakChuck Lever
[ Upstream commit 64d26422516b2e347b32e6d9b1d40b3c19a62aae ] During a connection tear down, the Receive queue is flushed before the device resources are freed. Typically, all the Receives flush with IB_WR_FLUSH_ERR. However, any pending successful Receives flush with IB_WR_SUCCESS, and the server automatically posts a fresh Receive to replace the completing one. This happens even after the connection has closed and the RQ is drained. Receives that are posted after the RQ is drained appear never to complete, causing a Receive resource leak. The leaked Receive buffer is left DMA-mapped. To prevent these late-posted recv_ctxt's from leaking, block new Receive posting after XPT_CLOSE is set. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26m68knommu: fix overwriting of bits in ColdFire V3 cache controlGreg Ungerer
[ Upstream commit bdee0e793cea10c516ff48bf3ebb4ef1820a116b ] The Cache Control Register (CACR) of the ColdFire V3 has bits that control high level caching functions, and also enable/disable the use of the alternate stack pointer register (the EUSP bit) to provide separate supervisor and user stack pointer registers. The code as it is today will blindly clear the EUSP bit on cache actions like invalidation. So it is broken for this case - and that will result in failed booting (interrupt entry and exit processing will be completely hosed). This only affects ColdFire V3 parts that support the alternate stack register (like the 5329 for example) - generally speaking new parts do, older parts don't. It has no impact on ColdFire V3 parts with the single stack pointer, like the 5307 for example. Fix the cache bit defines used, so they maintain the EUSP bit when carrying out cache actions through the CACR register. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26MIPS: Fix unable to reserve memory for Crash kernelJinyang He
[ Upstream commit b1ce9716f3b5ed3b49badf1f003b9e34b7ead0f9 ] Use 0 as the align parameter in memblock_find_in_range() is incorrect when we reserve memory for Crash kernel. The environment as follows: [ 0.000000] MIPS: machine is loongson,loongson64c-4core-rs780e ... [ 1.951016] crashkernel=64M@128M The warning as follows: [ 0.000000] Invalid memory region reserved for crash kernel And the iomem as follows: 00200000-0effffff : System RAM 04000000-0484009f : Kernel code 048400a0-04ad7fff : Kernel data 04b40000-05c4c6bf : Kernel bss 1a000000-1bffffff : pci@1a000000 ... The align parameter may be finally used by round_down() or round_up(). Like the following call tree: mips-next: mm/memblock.c memblock_find_in_range └── memblock_find_in_range_node ├── __memblock_find_range_bottom_up │ └── round_up └── __memblock_find_range_top_down └── round_down \#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1) \#define round_down(x, y) ((x) & ~__round_mask(x, y)) \#define __round_mask(x, y) ((__typeof__(x))((y)-1)) The round_down(or round_up)'s second parameter must be a power of 2. If the second parameter is 0, it both will return 0. Use 1 as the parameter to fix the bug and the iomem as follows: 00200000-0effffff : System RAM 04000000-0484009f : Kernel code 048400a0-04ad7fff : Kernel data 04b40000-05c4c6bf : Kernel bss 08000000-0bffffff : Crash kernel 1a000000-1bffffff : pci@1a000000 ... Signed-off-by: Jinyang He <hejinyang@loongson.cn> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26Input: psmouse - add a newline when printing 'proto' by sysfsXiongfeng Wang
[ Upstream commit 4aec14de3a15cf9789a0e19c847f164776f49473 ] When I cat parameter 'proto' by sysfs, it displays as follows. It's better to add a newline for easy reading. root@syzkaller:~# cat /sys/module/psmouse/parameters/proto autoroot@syzkaller:~# Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Link: https://lore.kernel.org/r/20200720073846.120724-1-wangxiongfeng2@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26media: vpss: clean up resources in initEvgeny Novikov
[ Upstream commit 9c487b0b0ea7ff22127fe99a7f67657d8730ff94 ] If platform_driver_register() fails within vpss_init() resources are not cleaned up. The patch fixes this issue by introducing the corresponding error handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26rtc: goldfish: Enable interrupt in set_alarm() when necessaryHuacai Chen
[ Upstream commit 22f8d5a1bf230cf8567a4121fc3789babb46336d ] When use goldfish rtc, the "hwclock" command fails with "select() to /dev/rtc to wait for clock tick timed out". This is because "hwclock" need the set_alarm() hook to enable interrupt when alrm->enabled is true. This operation is missing in goldfish rtc (but other rtc drivers, such as cmos rtc, enable interrupt here), so add it. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1592654683-31314-1-git-send-email-chenhc@lemote.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26media: budget-core: Improve exception handling in budget_register()Chuhong Yuan
[ Upstream commit fc0456458df8b3421dba2a5508cd817fbc20ea71 ] budget_register() has no error handling after its failure. Add the missed undo functions for error handling to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26scsi: target: tcmu: Fix crash in tcmu_flush_dcache_range on ARMBodo Stroesser
[ Upstream commit 3145550a7f8b08356c8ff29feaa6c56aca12901d ] This patch fixes the following crash (see https://bugzilla.kernel.org/show_bug.cgi?id=208045) Process iscsi_trx (pid: 7496, stack limit = 0x0000000010dd111a) CPU: 0 PID: 7496 Comm: iscsi_trx Not tainted 4.19.118-0419118-generic #202004230533 Hardware name: Greatwall QingTian DF720/F601, BIOS 601FBE20 Sep 26 2019 pstate: 80400005 (Nzcv daif +PAN -UAO) pc : flush_dcache_page+0x18/0x40 lr : is_ring_space_avail+0x68/0x2f8 [target_core_user] sp : ffff000015123a80 x29: ffff000015123a80 x28: 0000000000000000 x27: 0000000000001000 x26: ffff000023ea5000 x25: ffffcfa25bbe08b8 x24: 0000000000000078 x23: ffff7e0000000000 x22: ffff000023ea5001 x21: ffffcfa24b79c000 x20: 0000000000000fff x19: ffff7e00008fa940 x18: 0000000000000000 x17: 0000000000000000 x16: ffff2d047e709138 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: ffff2d047fbd0a40 x11: 0000000000000000 x10: 0000000000000030 x9 : 0000000000000000 x8 : ffffc9a254820a00 x7 : 00000000000013b0 x6 : 000000000000003f x5 : 0000000000000040 x4 : ffffcfa25bbe08e8 x3 : 0000000000001000 x2 : 0000000000000078 x1 : ffffcfa25bbe08b8 x0 : ffff2d040bc88a18 Call trace: flush_dcache_page+0x18/0x40 is_ring_space_avail+0x68/0x2f8 [target_core_user] queue_cmd_ring+0x1f8/0x680 [target_core_user] tcmu_queue_cmd+0xe4/0x158 [target_core_user] __target_execute_cmd+0x30/0xf0 [target_core_mod] target_execute_cmd+0x294/0x390 [target_core_mod] transport_generic_new_cmd+0x1e8/0x358 [target_core_mod] transport_handle_cdb_direct+0x50/0xb0 [target_core_mod] iscsit_execute_cmd+0x2b4/0x350 [iscsi_target_mod] iscsit_sequence_cmd+0xd8/0x1d8 [iscsi_target_mod] iscsit_process_scsi_cmd+0xac/0xf8 [iscsi_target_mod] iscsit_get_rx_pdu+0x404/0xd00 [iscsi_target_mod] iscsi_target_rx_thread+0xb8/0x130 [iscsi_target_mod] kthread+0x130/0x138 ret_from_fork+0x10/0x18 Code: f9000bf3 aa0003f3 aa1e03e0 d503201f (f9400260) ---[ end trace 1e451c73f4266776 ]--- The solution is based on patch: "scsi: target: tcmu: Optimize use of flush_dcache_page" which restricts the use of tcmu_flush_dcache_range() to addresses from vmalloc'ed areas only. This patch now replaces the virt_to_page() call in tcmu_flush_dcache_range() - which is wrong for vmalloced addrs - by vmalloc_to_page(). The patch was tested on ARM with kernel 4.19.118 and 5.7.2 Link: https://lore.kernel.org/r/20200618131632.32748-3-bstroesser@ts.fujitsu.com Tested-by: JiangYu <lnsyyj@hotmail.com> Tested-by: Daniel Meyerholt <dxm523@gmail.com> Acked-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26scsi: ufs: Add DELAY_BEFORE_LPM quirk for Micron devicesStanley Chu
[ Upstream commit c0a18ee0ce78d7957ec1a53be35b1b3beba80668 ] It is confirmed that Micron device needs DELAY_BEFORE_LPM quirk to have a delay before VCC is powered off. Sdd Micron vendor ID and this quirk for Micron devices. Link: https://lore.kernel.org/r/20200612012625.6615-2-stanley.chu@mediatek.com Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-19 12:36:14 +0000