summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-11-17net/smc: fix sk_refcnt underflow on linkdown and fallbackDust Li
[ Upstream commit e5d5aadcf3cd59949316df49c27cb21788d7efe4 ] We got the following WARNING when running ab/nginx test with RDMA link flapping (up-down-up). The reason is when smc_sock fallback and at linkdown happens simultaneously, we may got the following situation: __smc_lgr_terminate() --> smc_conn_kill() --> smc_close_active_abort() smc_sock->sk_state = SMC_CLOSED sock_put(smc_sock) smc_sock was set to SMC_CLOSED and sock_put() been called when terminate the link group. But later application call close() on the socket, then we got: __smc_release(): if (smc_sock->fallback) smc_sock->sk_state = SMC_CLOSED sock_put(smc_sock) Again we set the smc_sock to CLOSED through it's already in CLOSED state, and double put the refcnt, so the following warning happens: refcount_t: underflow; use-after-free. WARNING: CPU: 5 PID: 860 at lib/refcount.c:28 refcount_warn_saturate+0x8d/0xf0 Modules linked in: CPU: 5 PID: 860 Comm: nginx Not tainted 5.10.46+ #403 Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014 RIP: 0010:refcount_warn_saturate+0x8d/0xf0 Code: 05 5c 1e b5 01 01 e8 52 25 bc ff 0f 0b c3 80 3d 4f 1e b5 01 00 75 ad 48 RSP: 0018:ffffc90000527e50 EFLAGS: 00010286 RAX: 0000000000000026 RBX: ffff8881300df2c0 RCX: 0000000000000027 RDX: 0000000000000000 RSI: ffff88813bd58040 RDI: ffff88813bd58048 RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000001 R10: ffff8881300df2c0 R11: ffffc90000527c78 R12: ffff8881300df340 R13: ffff8881300df930 R14: ffff88810b3dad80 R15: ffff8881300df4f8 FS: 00007f739de8fb80(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000a01b008 CR3: 0000000111b64003 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: smc_release+0x353/0x3f0 __sock_release+0x3d/0xb0 sock_close+0x11/0x20 __fput+0x93/0x230 task_work_run+0x65/0xa0 exit_to_user_mode_prepare+0xf9/0x100 syscall_exit_to_user_mode+0x27/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This patch adds check in __smc_release() to make sure we won't do an extra sock_put() and set the socket to CLOSED when its already in CLOSED state. Fixes: 51f1de79ad8e (net/smc: replace sock_put worker by socket refcounting) Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17vsock: prevent unnecessary refcnt inc for nonblocking connectEiichi Tsukata
[ Upstream commit c7cd82b90599fa10915f41e3dd9098a77d0aa7b6 ] Currently vosck_connect() increments sock refcount for nonblocking socket each time it's called, which can lead to memory leak if it's called multiple times because connect timeout function decrements sock refcount only once. Fixes it by making vsock_connect() return -EALREADY immediately when sock state is already SS_CONNECTING. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17net: marvell: mvpp2: Fix wrong SerDes reconfiguration orderMarek Behún
[ Upstream commit bb7bbb6e36474933540c24ae1f1ad651b843981f ] Commit bfe301ebbc94 ("net: mvpp2: convert to use mac_prepare()/mac_finish()") introduced a bug wherein it leaves the MAC RESET register asserted after mac_finish(), due to wrong order of function calls. Before it was: .mac_config() mvpp22_mode_reconfigure() assert reset mvpp2_xlg_config() deassert reset Now it is: .mac_prepare() .mac_config() mvpp2_xlg_config() deassert reset .mac_finish() mvpp2_xlg_config() assert reset Obviously this is wrong. This bug is triggered when phylink tries to change the PHY interface mode from a GMAC mode (sgmii, 1000base-x, 2500base-x) to XLG mode (10gbase-r, xaui). The XLG mode does not work since reset is left asserted. Only after ifconfig down && ifconfig up is called will the XLG mode work. Move the call to mvpp22_mode_reconfigure() to .mac_prepare() implementation. Since some of the subsequent functions need to know whether the interface is being changed, we unfortunately also need to pass around the new interface mode before setting port->phy_interface. Fixes: bfe301ebbc94 ("net: mvpp2: convert to use mac_prepare()/mac_finish()") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17net: ethernet: ti: cpsw_ale: Fix access to un-initialized memoryChristophe JAILLET
[ Upstream commit 7a166854b4e24c57d56b3eba9fe1594985ee0a2c ] It is spurious to allocate a bitmap without initializing it. So, better safe than sorry, initialize it to 0 at least to have some known values. While at it, switch to the devm_bitmap_ API which is less verbose. Fixes: 4b41d3436796 ("net: ethernet: ti: cpsw: allow untagged traffic on host port") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17net: stmmac: allow a tc-taprio base-time of zeroVladimir Oltean
[ Upstream commit f64ab8e4f368f48afb08ae91928e103d17b235e9 ] Commit fe28c53ed71d ("net: stmmac: fix taprio configuration when base_time is in the past") allowed some base time values in the past, but apparently not all, the base-time value of 0 (Jan 1st 1970) is still explicitly denied by the driver. Remove the bogus check. Fixes: b60189e0392f ("net: stmmac: Integrate EST with TAPRIO scheduler API") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17net: hns3: allow configure ETS bandwidth of all TCsGuangbin Huang
[ Upstream commit 688db0c7a4a69ddc8b8143a1cac01eb20082a3aa ] Currently, driver only allow configuring ETS bandwidth of TCs according to the max TC number queried from firmware. However, the hardware actually supports 8 TCs and users may need to configure ETS bandwidth of all TCs, so remove the restriction. Fixes: 330baff5423b ("net: hns3: add ETS TC weight setting in SSU module") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17net: hns3: fix kernel crash when unload VF while it is being resetYufeng Mo
[ Upstream commit e140c7983e3054be0652bf914f4454f16c5520b0 ] When fully configure VLANs for a VF, then unload the VF while triggering a reset to PF, will cause a kernel crash because the irq is already uninit. [ 293.177579] ------------[ cut here ]------------ [ 293.183502] kernel BUG at drivers/pci/msi.c:352! [ 293.189547] Internal error: Oops - BUG: 0 [#1] SMP ...... [ 293.390124] Workqueue: hclgevf hclgevf_service_task [hclgevf] [ 293.402627] pstate: 80c00009 (Nzcv daif +PAN +UAO) [ 293.414324] pc : free_msi_irqs+0x19c/0x1b8 [ 293.425429] lr : free_msi_irqs+0x18c/0x1b8 [ 293.436545] sp : ffff00002716fbb0 [ 293.446950] x29: ffff00002716fbb0 x28: 0000000000000000 [ 293.459519] x27: 0000000000000000 x26: ffff45b91ea16b00 [ 293.472183] x25: 0000000000000000 x24: ffffa587b08f4700 [ 293.484717] x23: ffffc591ac30e000 x22: ffffa587b08f8428 [ 293.497190] x21: ffffc591ac30e300 x20: 0000000000000000 [ 293.509594] x19: ffffa58a062a8300 x18: 0000000000000000 [ 293.521949] x17: 0000000000000000 x16: ffff45b91dcc3f48 [ 293.534013] x15: 0000000000000000 x14: 0000000000000000 [ 293.545883] x13: 0000000000000040 x12: 0000000000000228 [ 293.557508] x11: 0000000000000020 x10: 0000000000000040 [ 293.568889] x9 : ffff45b91ea1e190 x8 : ffffc591802d0000 [ 293.580123] x7 : ffffc591802d0148 x6 : 0000000000000120 [ 293.591190] x5 : ffffc591802d0000 x4 : 0000000000000000 [ 293.602015] x3 : 0000000000000000 x2 : 0000000000000000 [ 293.612624] x1 : 00000000000004a4 x0 : ffffa58a1e0c6b80 [ 293.623028] Call trace: [ 293.630340] free_msi_irqs+0x19c/0x1b8 [ 293.638849] pci_disable_msix+0x118/0x140 [ 293.647452] pci_free_irq_vectors+0x20/0x38 [ 293.656081] hclgevf_uninit_msi+0x44/0x58 [hclgevf] [ 293.665309] hclgevf_reset_rebuild+0x1ac/0x2e0 [hclgevf] [ 293.674866] hclgevf_reset+0x358/0x400 [hclgevf] [ 293.683545] hclgevf_reset_service_task+0xd0/0x1b0 [hclgevf] [ 293.693325] hclgevf_service_task+0x4c/0x2e8 [hclgevf] [ 293.702307] process_one_work+0x1b0/0x448 [ 293.710034] worker_thread+0x54/0x468 [ 293.717331] kthread+0x134/0x138 [ 293.724114] ret_from_fork+0x10/0x18 [ 293.731324] Code: f940b000 b4ffff00 a903e7b8 f90017b6 (d4210000) This patch fixes the problem by waiting for the VF reset done while unloading the VF. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17net: hns3: fix pfc packet number incorrect after querying pfc parametersJie Wang
[ Upstream commit 0b653a81a26d66ffe526a54c2177e24fb1400301 ] Currently, driver will send command to firmware to query pfc packet number when user uses dcb tool to get pfc parameters. However, the periodic service task will also periodically query and record MAC statistics, including pfc packet number. As the hardware registers of statistics is cleared after reading, it will cause pfc packet number of MAC statistics are not correct after using dcb tool to get pfc parameters. To fix this problem, when user uses dcb tool to get pfc parameters, driver updates MAC statistics firstly and then get pfc packet number from MAC statistics. Fixes: 64fd2300fcc1 ("net: hns3: add support for querying pfc puase packets statistic") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17net: hns3: fix ROCE base interrupt vector initialization bugJie Wang
[ Upstream commit beb27ca451a57a1c0e52b5268703f3c3173c1f8c ] Currently, NIC init ROCE interrupt vector with MSIX interrupt. But ROCE use pci_irq_vector() to get interrupt vector, which adds the relative interrupt vector again and gets wrong interrupt vector. So fixes it by assign relative interrupt vector to ROCE instead of MSIX interrupt vector and delete the unused struct member base_msi_vector declaration of hclgevf_dev. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17net/sched: sch_taprio: fix undefined behavior in ktime_mono_to_anyEric Dumazet
[ Upstream commit 6dc25401cba4d428328eade8ceae717633fdd702 ] 1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls ktime_mono_to_any() with out-of-bound value. 2) if q->tk_offset is changed in taprio_parse_clockid(), taprio_get_time() might also call ktime_mono_to_any() with out-of-bound value as sysbot found: UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27 index 3 is out of range for type 'ktime_t *[3]' CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908 get_tcp_tstamp net/sched/sch_taprio.c:322 [inline] get_packet_txtime net/sched/sch_taprio.c:353 [inline] taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420 taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785 __dev_xmit_skb net/core/dev.c:3869 [inline] __dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194 batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier") Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vedang Patel <vedang.patel@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17net: dsa: mv88e6xxx: Don't support >1G speeds on 6191X on ports other than 10Marek Behún
[ Upstream commit dc2fc9f03c5c410d8f01c2206b3d529f80b13733 ] Model 88E6191X only supports >1G speeds on port 10. Port 0 and 9 are only 1G. Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20211104171747.10509-1-kabel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17seq_file: fix passing wrong private dataMuchun Song
[ Upstream commit 10a6de19cad6efb9b49883513afb810dc265fca2 ] DEFINE_PROC_SHOW_ATTRIBUTE() is supposed to be used to define a series of functions and variables to register proc file easily. And the users can use proc_create_data() to pass their own private data and get it via seq->private in the callback. Unfortunately, the proc file system use PDE_DATA() to get private data instead of inode->i_private. So fix it. Fortunately, there only one user of it which does not pass any private data, so this bug does not break any in-tree codes. Link: https://lkml.kernel.org/r/20211029032638.84884-1-songmuchun@bytedance.com Fixes: 97a32539b956 ("proc: convert everything to "struct proc_ops"") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Florent Revest <revest@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17drm/i915/fb: Fix rounding error in subsampled plane size calculationImre Deak
[ Upstream commit 90ab96f3872eae816f4e07deaa77322a91237960 ] For NV12 FBs with odd main surface tile-row height the CCS surface height was incorrectly calculated 1 less than the actual value. Fix this by rounding up the result of divison. For consistency do the same for the CCS surface width calculation. Fixes: b3e57bccd68a ("drm/i915/tgl: Gen-12 render decompression") Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-2-imre.deak@intel.com (cherry picked from commit 2ee5ef9c934ad26376c9282171e731e6c0339815) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17gve: Fix off by one in gve_tx_timeout()Dan Carpenter
[ Upstream commit 1c360cc1cc883fbdf0a258b4df376571fbeac5ee ] The priv->ntfy_blocks[] has "priv->num_ntfy_blks" elements so this > needs to be >= to prevent an off by one bug. The priv->ntfy_blocks[] array is allocated in gve_alloc_notify_blocks(). Fixes: 87a7f321bb6a ("gve: Recover from queue stall due to missed IRQ") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17dmaengine: stm32-dma: avoid 64-bit division in stm32_dma_get_max_widthArnd Bergmann
[ Upstream commit 2498363310e9b5e5de0e104709adc35c9f3ff7d9 ] Using the % operator on a 64-bit variable is expensive and can cause a link failure: arm-linux-gnueabi-ld: drivers/dma/stm32-dma.o: in function `stm32_dma_get_max_width': stm32-dma.c:(.text+0x170): undefined reference to `__aeabi_uldivmod' arm-linux-gnueabi-ld: drivers/dma/stm32-dma.o: in function `stm32_dma_set_xfer_param': stm32-dma.c:(.text+0x1cd4): undefined reference to `__aeabi_uldivmod' As we know that we just want to check the alignment in stm32_dma_get_max_width(), there is no need for a full division, and using a simple mask is a faster replacement. Same in stm32_dma_set_xfer_param(), change this to only allow burst transfers if the address is a multiple of the length. stm32_dma_get_best_burst just after will take buf_len into account to fix burst in case of misalignment. Fixes: b20fd5fa310c ("dmaengine: stm32-dma: fix stm32_dma_get_max_width") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211103153312.41483-1-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17dmaengine: stm32-dma: fix burst in case of unaligned memory addressAmelie Delaunay
[ Upstream commit af229d2c2557b5cf2a3b1eb39847ec1de7446873 ] Theorically, address pointers used by STM32 DMA must be chosen so as to ensure that all transfers within a burst block are aligned on the address boundary equal to the size of the transfer. If this is always the case for peripheral addresses on STM32, it is not for memory addresses if the user doesn't respect this alignment constraint. To avoid a weird behavior of the DMA controller in this case (no error triggered but data are not transferred as expected), force no burst. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211011094259.315023-4-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17bpf, sockmap: sk_skb data_end access incorrect when src_reg = dst_regJussi Maki
[ Upstream commit b2c4618162ec615a15883a804cce7e27afecfa58 ] The current conversion of skb->data_end reads like this: ; data_end = (void*)(long)skb->data_end; 559: (79) r1 = *(u64 *)(r2 +200) ; r1 = skb->data 560: (61) r11 = *(u32 *)(r2 +112) ; r11 = skb->len 561: (0f) r1 += r11 562: (61) r11 = *(u32 *)(r2 +116) 563: (1f) r1 -= r11 But similar to the case in 84f44df664e9 ("bpf: sock_ops sk access may stomp registers when dst_reg = src_reg"), the code will read an incorrect skb->len when src == dst. In this case we end up generating this xlated code: ; data_end = (void*)(long)skb->data_end; 559: (79) r1 = *(u64 *)(r1 +200) ; r1 = skb->data 560: (61) r11 = *(u32 *)(r1 +112) ; r11 = (skb->data)->len 561: (0f) r1 += r11 562: (61) r11 = *(u32 *)(r1 +116) 563: (1f) r1 -= r11 ... where line 560 is the reading 4B of (skb->data + 112) instead of the intended skb->len Here the skb pointer in r1 gets set to skb->data and the later deref for skb->len ends up following skb->data instead of skb. This fixes the issue similarly to the patch mentioned above by creating an additional temporary variable and using to store the register when dst_reg = src_reg. We name the variable bpf_temp_reg and place it in the cb context for sk_skb. Then we restore from the temp to ensure nothing is lost. Fixes: 16137b09a66f2 ("bpf: Compute data_end dynamically with JIT code") Signed-off-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20211103204736.248403-6-john.fastabend@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17bpf: sockmap, strparser, and tls are reusing qdisc_skb_cb and collidingJohn Fastabend
[ Upstream commit e0dc3b93bd7bcff8c3813d1df43e0908499c7cf0 ] Strparser is reusing the qdisc_skb_cb struct to stash the skb message handling progress, e.g. offset and length of the skb. First this is poorly named and inherits a struct from qdisc that doesn't reflect the actual usage of cb[] at this layer. But, more importantly strparser is using the following to access its metadata. (struct _strp_msg *)((void *)skb->cb + offsetof(struct qdisc_skb_cb, data)) Where _strp_msg is defined as: struct _strp_msg { struct strp_msg strp; /* 0 8 */ int accum_len; /* 8 4 */ /* size: 12, cachelines: 1, members: 2 */ /* last cacheline: 12 bytes */ }; So we use 12 bytes of ->data[] in struct. However in BPF code running parser and verdict the user has read capabilities into the data[] array as well. Its not too problematic, but we should not be exposing internal state to BPF program. If its really needed then we can use the probe_read() APIs which allow reading kernel memory. And I don't believe cb[] layer poses any API breakage by moving this around because programs can't depend on cb[] across layers. In order to fix another issue with a ctx rewrite we need to stash a temp variable somewhere. To make this work cleanly this patch builds a cb struct for sk_skb types called sk_skb_cb struct. Then we can use this consistently in the strparser, sockmap space. Additionally we can start allowing ->cb[] write access after this. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jussi Maki <joamaki@gmail.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20211103204736.248403-5-john.fastabend@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17bpf, sockmap: Fix race in ingress receive verdict with redirect to selfJohn Fastabend
[ Upstream commit c5d2177a72a1659554922728fc407f59950aa929 ] A socket in a sockmap may have different combinations of programs attached depending on configuration. There can be no programs in which case the socket acts as a sink only. There can be a TX program in this case a BPF program is attached to sending side, but no RX program is attached. There can be an RX program only where sends have no BPF program attached, but receives are hooked with BPF. And finally, both TX and RX programs may be attached. Giving us the permutations: None, Tx, Rx, and TxRx To date most of our use cases have been TX case being used as a fast datapath to directly copy between local application and a userspace proxy. Or Rx cases and TxRX applications that are operating an in kernel based proxy. The traffic in the first case where we hook applications into a userspace application looks like this: AppA redirect AppB Tx <-----------> Rx | | + + TCP <--> lo <--> TCP In this case all traffic from AppA (after 3whs) is copied into the AppB ingress queue and no traffic is ever on the TCP recieive_queue. In the second case the application never receives, except in some rare error cases, traffic on the actual user space socket. Instead the send happens in the kernel. AppProxy socket pool sk0 ------------->{sk1,sk2, skn} ^ | | | | v ingress lb egress TCP TCP Here because traffic is never read off the socket with userspace recv() APIs there is only ever one reader on the sk receive_queue. Namely the BPF programs. However, we've started to introduce a third configuration where the BPF program on receive should process the data, but then the normal case is to push the data into the receive queue of AppB. AppB recv() (userspace) ----------------------- tcp_bpf_recvmsg() (kernel) | | | | | | ingress_msgQ | | | RX_BPF | | | v v sk->receive_queue This is different from the App{A,B} redirect because traffic is first received on the sk->receive_queue. Now for the issue. The tcp_bpf_recvmsg() handler first checks the ingress_msg queue for any data handled by the BPF rx program and returned with PASS code so that it was enqueued on the ingress msg queue. Then if no data exists on that queue it checks the socket receive queue. Unfortunately, this is the same receive_queue the BPF program is reading data off of. So we get a race. Its possible for the recvmsg() hook to pull data off the receive_queue before the BPF hook has a chance to read it. It typically happens when an application is banging on recv() and getting EAGAINs. Until they manage to race with the RX BPF program. To fix this we note that before this patch at attach time when the socket is loaded into the map we check if it needs a TX program or just the base set of proto bpf hooks. Then it uses the above general RX hook regardless of if we have a BPF program attached at rx or not. This patch now extends this check to handle all cases enumerated above, TX, RX, TXRX, and none. And to fix above race when an RX program is attached we use a new hook that is nearly identical to the old one except now we do not let the recv() call skip the RX BPF program. Now only the BPF program pulls data from sk->receive_queue and recv() only pulls data from the ingress msgQ post BPF program handling. With this resolved our AppB from above has been up and running for many hours without detecting any errors. We do this by correlating counters in RX BPF events and the AppB to ensure data is never skipping the BPF program. Selftests, was not able to detect this because we only run them for a short period of time on well ordered send/recvs so we don't get any of the noise we see in real application environments. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jussi Maki <joamaki@gmail.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20211103204736.248403-4-john.fastabend@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17bpf, sockmap: Remove unhash handler for BPF sockmap usageJohn Fastabend
[ Upstream commit b8b8315e39ffaca82e79d86dde26e9144addf66b ] We do not need to handle unhash from BPF side we can simply wait for the close to happen. The original concern was a socket could transition from ESTABLISHED state to a new state while the BPF hook was still attached. But, we convinced ourself this is no longer possible and we also improved BPF sockmap to handle listen sockets so this is no longer a problem. More importantly though there are cases where unhash is called when data is in the receive queue. The BPF unhash logic will flush this data which is wrong. To be correct it should keep the data in the receive queue and allow a receiving application to continue reading the data. This may happen when tcp_abort() is received for example. Instead of complicating the logic in unhash simply moving all this to tcp_close() hook solves this. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jussi Maki <joamaki@gmail.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20211103204736.248403-3-john.fastabend@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17arm64: pgtable: make __pte_to_phys/__phys_to_pte_val inline functionsArnd Bergmann
[ Upstream commit c7c386fbc20262c1d911c615c65db6a58667d92c ] gcc warns about undefined behavior the vmalloc code when building with CONFIG_ARM64_PA_BITS_52, when the 'idx++' in the argument to __phys_to_pte_val() is evaluated twice: mm/vmalloc.c: In function 'vmap_pfn_apply': mm/vmalloc.c:2800:58: error: operation on 'data->idx' may be undefined [-Werror=sequence-point] 2800 | *pte = pte_mkspecial(pfn_pte(data->pfns[data->idx++], data->prot)); | ~~~~~~~~~^~ arch/arm64/include/asm/pgtable-types.h:25:37: note: in definition of macro '__pte' 25 | #define __pte(x) ((pte_t) { (x) } ) | ^ arch/arm64/include/asm/pgtable.h:80:15: note: in expansion of macro '__phys_to_pte_val' 80 | __pte(__phys_to_pte_val((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) | ^~~~~~~~~~~~~~~~~ mm/vmalloc.c:2800:30: note: in expansion of macro 'pfn_pte' 2800 | *pte = pte_mkspecial(pfn_pte(data->pfns[data->idx++], data->prot)); | ^~~~~~~ I have no idea why this never showed up earlier, but the safest workaround appears to be changing those macros into inline functions so the arguments get evaluated only once. Cc: Matthew Wilcox <willy@infradead.org> Fixes: 75387b92635e ("arm64: handle 52-bit physical addresses in page table entries") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211105075414.2553155-1-arnd@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17arm64: arm64_ftr_reg->name may not be a human-readable stringReiji Watanabe
[ Upstream commit 9dc232a8ab18bb20f1dcb03c8e049e3607f3ed15 ] The id argument of ARM64_FTR_REG_OVERRIDE() is used for two purposes: one as the system register encoding (used for the sys_id field of __ftr_reg_entry), and the other as the register name (stringified and used for the name field of arm64_ftr_reg), which is debug information. The id argument is supposed to be a macro that indicates an encoding of the register (eg. SYS_ID_AA64PFR0_EL1, etc). ARM64_FTR_REG(), which also has the same id argument, uses ARM64_FTR_REG_OVERRIDE() and passes the id to the macro. Since the id argument is completely macro-expanded before it is substituted into a macro body of ARM64_FTR_REG_OVERRIDE(), the stringified id in the body of ARM64_FTR_REG_OVERRIDE is not a human-readable register name, but a string of numeric bitwise operations. Fix this so that human-readable register names are available as debug information. Fixes: 8f266a5d878a ("arm64: cpufeature: Add global feature override facility") Signed-off-by: Reiji Watanabe <reijiw@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211101045421.2215822-1-reijiw@google.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17nfc: pn533: Fix double free when pn533_fill_fragment_skbs() failsChengfeng Ye
[ Upstream commit 9fec40f850658e00a14a7dd9e06f7fbc7e59cc4a ] skb is already freed by dev_kfree_skb in pn533_fill_fragment_skbs, but follow error handler branch when pn533_fill_fragment_skbs() fails, skb is freed again, results in double free issue. Fix this by not free skb in error path of pn533_fill_fragment_skbs. Fixes: 963a82e07d4e ("NFC: pn533: Split large Tx frames in chunks") Fixes: 93ad42020c2d ("NFC: pn533: Target mode Tx fragmentation support") Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17llc: fix out-of-bound array index in llc_sk_dev_hash()Eric Dumazet
[ Upstream commit 8ac9dfd58b138f7e82098a4e0a0d46858b12215b ] Both ifindex and LLC_SK_DEV_HASH_ENTRIES are signed. This means that (ifindex % LLC_SK_DEV_HASH_ENTRIES) is negative if @ifindex is negative. We could simply make LLC_SK_DEV_HASH_ENTRIES unsigned. In this patch I chose to use hash_32() to get more entropy from @ifindex, like llc_sk_laddr_hashfn(). UBSAN: array-index-out-of-bounds in ./include/net/llc.h:75:26 index -43 is out of range for type 'hlist_head [64]' CPU: 1 PID: 20999 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 llc_sk_dev_hash include/net/llc.h:75 [inline] llc_sap_add_socket+0x49c/0x520 net/llc/llc_conn.c:697 llc_ui_bind+0x680/0xd70 net/llc/af_llc.c:404 __sys_bind+0x1e9/0x250 net/socket.c:1693 __do_sys_bind net/socket.c:1704 [inline] __se_sys_bind net/socket.c:1702 [inline] __x64_sys_bind+0x6f/0xb0 net/socket.c:1702 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fa503407ae9 Fixes: 6d2e3ea28446 ("llc: use a device based hash table to speed up multicast delivery") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17perf bpf: Add missing free to bpf_event__print_bpf_prog_info()Ian Rogers
[ Upstream commit 88c42f4d6cb249eb68524282f8d4cc32f9059984 ] If btf__new() is called then there needs to be a corresponding btf__free(). Fixes: f8dfeae009effc0b ("perf bpf: Show more BPF program info in print_bpf_prog_info()") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20211106053733.3580931-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17zram: off by one in read_block_state()Dan Carpenter
[ Upstream commit a88e03cf3d190cf46bc4063a9b7efe87590de5f4 ] snprintf() returns the number of bytes it would have printed if there were space. But it does not count the NUL terminator. So that means that if "count == copied" then this has already overflowed by one character. This bug likely isn't super harmful in real life. Link: https://lkml.kernel.org/r/20210916130404.GA25094@kili Fixes: c0265342bff4 ("zram: introduce zram memory tracking") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17mm/zsmalloc.c: close race window between zs_pool_dec_isolated() and ↵Miaohe Lin
zs_unregister_migration() [ Upstream commit afe8605ca45424629fdddfd85984b442c763dc47 ] There is one possible race window between zs_pool_dec_isolated() and zs_unregister_migration() because wait_for_isolated_drain() checks the isolated count without holding class->lock and there is no order inside zs_pool_dec_isolated(). Thus the below race window could be possible: zs_pool_dec_isolated zs_unregister_migration check pool->destroying != 0 pool->destroying = true; smp_mb(); wait_for_isolated_drain() wait for pool->isolated_pages == 0 atomic_long_dec(&pool->isolated_pages); atomic_long_read(&pool->isolated_pages) == 0 Since we observe the pool->destroying (false) before atomic_long_dec() for pool->isolated_pages, waking pool->migration_wait up is missed. Fix this by ensure checking pool->destroying happens after the atomic_long_dec(&pool->isolated_pages). Link: https://lkml.kernel.org/r/20210708115027.7557-1-linmiaohe@huawei.com Fixes: 701d678599d0 ("mm/zsmalloc.c: fix race condition in zs_destroy_pool") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Henry Burns <henryburns@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17can: mcp251xfd: mcp251xfd_chip_start(): fix error handling for ↵Marc Kleine-Budde
mcp251xfd_chip_rx_int_enable() [ Upstream commit 69c55f6e7669d46bb40e41f6e2b218428178368a ] This patch fixes the error handling for mcp251xfd_chip_rx_int_enable(). Instead just returning the error, properly shut down the chip. Link: https://lore.kernel.org/all/20211106201526.44292-2-mkl@pengutronix.de Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17can: etas_es58x: es58x_rx_err_msg(): fix memory leak in error pathVincent Mailhol
[ Upstream commit d9447f768bc8c60623e4bb3ce65b8f4654d33a50 ] In es58x_rx_err_msg(), if can->do_set_mode() fails, the function directly returns without calling netif_rx(skb). This means that the skb previously allocated by alloc_can_err_skb() is not freed. In other terms, this is a memory leak. This patch simply removes the return statement in the error branch and let the function continue. Issue was found with GCC -fanalyzer, please follow the link below for details. Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces") Link: https://lore.kernel.org/all/20211026180740.1953265-1-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17Revert "drm/imx: Annotate dma-fence critical section in commit path"Fabio Estevam
[ Upstream commit 14d9a37c952588930d7226953359fea3ab956d39 ] This reverts commit f4b34faa08428d813fc3629f882c503487f94a12. Since commit f4b34faa0842 ("drm/imx: Annotate dma-fence critical section in commit path") the following possible circular dependency is detected: [ 5.001811] ====================================================== [ 5.001817] WARNING: possible circular locking dependency detected [ 5.001824] 5.14.9-01225-g45da36cc6fcc-dirty #1 Tainted: G W [ 5.001833] ------------------------------------------------------ [ 5.001838] kworker/u8:0/7 is trying to acquire lock: [ 5.001848] c1752080 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x40/0x294 [ 5.001903] [ 5.001903] but task is already holding lock: [ 5.001909] c176df78 (dma_fence_map){++++}-{0:0}, at: imx_drm_atomic_commit_tail+0x10/0x160 [ 5.001957] [ 5.001957] which lock already depends on the new lock. ... Revert it for now. Tested on a imx6q-sabresd. Fixes: f4b34faa0842 ("drm/imx: Annotate dma-fence critical section in commit path") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211104001112.4035691-1-festevam@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17drm: fb_helper: improve CONFIG_FB dependencyArnd Bergmann
[ Upstream commit 9d6366e743f37d36ef69347924ead7bcc596076e ] My previous patch correctly addressed the possible link failure, but as Jani points out, the dependency is now stricter than it needs to be. Change it again, to allow DRM_FBDEV_EMULATION to be used when DRM_KMS_HELPER and FB are both loadable modules and DRM is linked into the kernel. As a side-effect, the option is now only visible when at least one DRM driver makes use of DRM_KMS_HELPER. This is better, because the option has no effect otherwise. Fixes: 606b102876e3 ("drm: fb_helper: fix CONFIG_FB dependency") Suggested-by: Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211029120307.1407047-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17selftests/bpf/xdp_redirect_multi: Limit the tests in netnsHangbin Liu
[ Upstream commit 8955c1a329873385775081e029d9a7c6aa9037e1 ] As I want to test both DEVMAP and DEVMAP_HASH in XDP multicast redirect, I limited DEVMAP max entries to a small value for performace. When the test runs after amount of interface creating/deleting tests. The interface index will exceed the map max entries and xdp_redirect_multi will error out with "Get interfacesInterface index to large". Fix this issue by limit the tests in netns and specify the ifindex when creating interfaces. Fixes: d23292476297 ("selftests/bpf: Add xdp_redirect_multi test") Reported-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211027033553.962413-5-liuhangbin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17selftests/bpf/xdp_redirect_multi: Give tcpdump a chance to terminate cleanlyHangbin Liu
[ Upstream commit 648c3677062fbd14d754b853daebb295426771e8 ] No need to kill tcpdump with -9. Fixes: d23292476297 ("selftests/bpf: Add xdp_redirect_multi test") Suggested-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211027033553.962413-4-liuhangbin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17selftests/bpf/xdp_redirect_multi: Use arping to accurate the arp numberHangbin Liu
[ Upstream commit f53ea9dbf78d42a10e2392b5c59362ccc224fd1d ] The arp request number triggered by ping none exist address is not accurate, which may lead the test false negative/positive. Change to use arping to accurate the arp number. Also do not use grep pattern match for dot. Fixes: d23292476297 ("selftests/bpf: Add xdp_redirect_multi test") Suggested-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211027033553.962413-3-liuhangbin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17selftests/bpf/xdp_redirect_multi: Put the logs to tmp folderHangbin Liu
[ Upstream commit 8b4ac13abe7d82da0e0d22a9ba2e27301559a93e ] The xdp_redirect_multi test logs are created in selftest folder and not cleaned after test. Let's creat a tmp dir and remove the logs after testing. Fixes: d23292476297 ("selftests/bpf: Add xdp_redirect_multi test") Suggested-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211027033553.962413-2-liuhangbin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17libbpf: Fix lookup_and_delete_elem_flags error reportingMehrdad Arshad Rad
[ Upstream commit 64165ddf8ea184631c65e3bbc8d59f6d940590ca ] Fix bpf_map_lookup_and_delete_elem_flags() to pass the return code through libbpf_err_errno() as we do similarly in bpf_map_lookup_and_delete_elem(). Fixes: f12b65432728 ("libbpf: Streamline error reporting for low-level APIs") Signed-off-by: Mehrdad Arshad Rad <arshad.rad@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20211104171354.11072-1-arshad.rad@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17ACPI: PM: Fix device wakeup power reference counting errorRafael J. Wysocki
[ Upstream commit 452a3e723f75880757acf87b053935c43aa89f89 ] Fix a device wakeup power reference counting error introduced by commit a2d7b2e004af ("ACPI: PM: Fix sharing of wakeup power resources") because of a coding mistake. Fixes: a2d7b2e004af ("ACPI: PM: Fix sharing of wakeup power resources") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17mfd: altera-sysmgr: Fix a mistake caused by resource_size conversionKai Song
[ Upstream commit fae2570d629cdd72f0611d015fc4ba705ae5422b ] The resource_size defines that: res->end - res->start + 1; The origin original code is: sysmgr_config.max_register = res->end - res->start - 3; So, the correct fix is that: sysmgr_config.max_register = resource_size(res) - 4; Fixes: d12edf9661a4 ("mfd: altera-sysmgr: Use resource_size function on resource object") Signed-off-by: Kai Song <songkai01@inspur.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211006141926.6120-1-songkai01@inspur.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17mfd: sprd: Add SPI device ID tableMark Brown
[ Upstream commit c5c7f0677107052060037583b9c8c15d818afb04 ] Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI device ID table. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210924143347.14721-4-broonie@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17mfd: cpcap: Add SPI device ID tableMark Brown
[ Upstream commit d5fa8592b773f4da2b04e7333cd37efec5e4ca43 ] Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI device ID table. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210924143347.14721-3-broonie@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17mfd: core: Add missing of_node_put for loop iterationKrzysztof Kozlowski
[ Upstream commit 002be81140075e17a1ebd5c3c55e356fbab0ddad ] Early exits from for_each_child_of_node() should decrement the node reference counter. Reported by Coccinelle: drivers/mfd/mfd-core.c:197:2-24: WARNING: Function "for_each_child_of_node" should have of_node_put() before goto around lines 209. Fixes: c94bb233a9fe ("mfd: Make MFD core code Device Tree and IRQ domain aware") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210528115126.18370-1-krzysztof.kozlowski@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17ALSA: memalloc: Catch call with NULL snd_dma_buffer pointerTakashi Iwai
[ Upstream commit dce9446192439eaac81c21f517325fb473735e53 ] Although we've covered all calls with NULL dma buffer pointer, so far, there may be still some else in the wild. For catching such a case more easily, add a WARN_ON_ONCE() in snd_dma_get_ops(). Fixes: 37af81c5998f ("ALSA: core: Abstract memory alloc helpers") Link: https://lore.kernel.org/r/20211105102103.28148-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17bonding: Fix a use-after-free problem when bond_sysfs_slave_add() failedHuang Guobin
[ Upstream commit b93c6a911a3fe926b00add28f3b932007827c4ca ] When I do fuzz test for bonding device interface, I got the following use-after-free Calltrace: ================================================================== BUG: KASAN: use-after-free in bond_enslave+0x1521/0x24f0 Read of size 8 at addr ffff88825bc11c00 by task ifenslave/7365 CPU: 5 PID: 7365 Comm: ifenslave Tainted: G E 5.15.0-rc1+ #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 Call Trace: dump_stack_lvl+0x6c/0x8b print_address_description.constprop.0+0x48/0x70 kasan_report.cold+0x82/0xdb __asan_load8+0x69/0x90 bond_enslave+0x1521/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f19159cf577 Code: b3 66 90 48 8b 05 11 89 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 78 RSP: 002b:00007ffeb3083c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffeb3084bca RCX: 00007f19159cf577 RDX: 00007ffeb3083ce0 RSI: 0000000000008990 RDI: 0000000000000003 RBP: 00007ffeb3084bc4 R08: 0000000000000040 R09: 0000000000000000 R10: 00007ffeb3084bc0 R11: 0000000000000246 R12: 00007ffeb3083ce0 R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffeb3083cb0 Allocated by task 7365: kasan_save_stack+0x23/0x50 __kasan_kmalloc+0x83/0xa0 kmem_cache_alloc_trace+0x22e/0x470 bond_enslave+0x2e1/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 7365: kasan_save_stack+0x23/0x50 kasan_set_track+0x20/0x30 kasan_set_free_info+0x24/0x40 __kasan_slab_free+0xf2/0x130 kfree+0xd1/0x5c0 slave_kobj_release+0x61/0x90 kobject_put+0x102/0x180 bond_sysfs_slave_add+0x7a/0xa0 bond_enslave+0x11b6/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Last potentially related work creation: kasan_save_stack+0x23/0x50 kasan_record_aux_stack+0xb7/0xd0 insert_work+0x43/0x190 __queue_work+0x2e3/0x970 delayed_work_timer_fn+0x3e/0x50 call_timer_fn+0x148/0x470 run_timer_softirq+0x8a8/0xc50 __do_softirq+0x107/0x55f Second to last potentially related work creation: kasan_save_stack+0x23/0x50 kasan_record_aux_stack+0xb7/0xd0 insert_work+0x43/0x190 __queue_work+0x2e3/0x970 __queue_delayed_work+0x130/0x180 queue_delayed_work_on+0xa7/0xb0 bond_enslave+0xe25/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88825bc11c00 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes inside of 1024-byte region [ffff88825bc11c00, ffff88825bc12000) The buggy address belongs to the page: page:ffffea00096f0400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x25bc10 head:ffffea00096f0400 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x57ff00000010200(slab|head|node=1|zone=2|lastcpupid=0x7ff) raw: 057ff00000010200 ffffea0009a71c08 ffff888240001968 ffff88810004dbc0 raw: 0000000000000000 00000000000a000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88825bc11b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88825bc11b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88825bc11c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88825bc11c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88825bc11d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Put new_slave in bond_sysfs_slave_add() will cause use-after-free problems when new_slave is accessed in the subsequent error handling process. Since new_slave will be put in the subsequent error handling process, remove the unnecessary put to fix it. In addition, when sysfs_create_file() fails, if some files have been crea- ted successfully, we need to call sysfs_remove_file() to remove them. Since there are sysfs_create_files() & sysfs_remove_files() can be used, use these two functions instead. Fixes: 7afcaec49696 (bonding: use kobject_put instead of _del after kobject_add) Signed-off-by: Huang Guobin <huangguobin4@huawei.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17drm/ttm: remove ttm_bo_vm_insert_huge()Jason Gunthorpe
[ Upstream commit 0d979509539ed1df883a30d442177ca7be609565 ] The huge page functionality in TTM does not work safely because PUD and PMD entries do not have a special bit. get_user_pages_fast() considers any page that passed pmd_huge() as usable: if (unlikely(pmd_trans_huge(pmd) || pmd_huge(pmd) || pmd_devmap(pmd))) { And vmf_insert_pfn_pmd_prot() unconditionally sets entry = pmd_mkhuge(pfn_t_pmd(pfn, prot)); eg on x86 the page will be _PAGE_PRESENT | PAGE_PSE. As such gup_huge_pmd() will try to deref a struct page: head = try_grab_compound_head(pmd_page(orig), refs, flags); and thus crash. Thomas further notices that the drivers are not expecting the struct page to be used by anything - in particular the refcount incr above will cause them to malfunction. Thus everything about this is not able to fully work correctly considering GUP_fast. Delete it entirely. It can return someday along with a proper PMD/PUD_SPECIAL bit in the page table itself to gate GUP_fast. Fixes: 314b6580adc5 ("drm/ttm, drm/vmwgfx: Support huge TTM pagefaults") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Thomas Hellström <thomas.helllstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> [danvet: Update subject per Thomas' &Christian's review] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/0-v2-a44694790652+4ac-ttm_pmd_jgg@nvidia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17net: phy: fix duplex out of sync problem while changing settingsHeiner Kallweit
[ Upstream commit a4db9055fdb9cf607775c66d39796caf6439ec92 ] As reported by Zhang there's a small issue if in forced mode the duplex mode changes with the link staying up [0]. In this case the MAC isn't notified about the change. The proposed patch relies on the phylib state machine and ignores the fact that there are drivers that uses phylib but not the phylib state machine. So let's don't change the behavior for such drivers and fix it w/o re-adding state PHY_FORCING for the case that phylib state machine is used. [0] https://lore.kernel.org/netdev/a5c26ffd-4ee4-a5e6-4103-873208ce0dc5@huawei.com/T/ Fixes: 2bd229df5e2e ("net: phy: remove state PHY_FORCING") Reported-by: Zhang Changzhong <zhangchangzhong@huawei.com> Tested-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/7b8b9456-a93f-abbc-1dc5-a2c2542f932c@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17cpufreq: intel_pstate: Clear HWP desired on suspend/shutdown and offlineRafael J. Wysocki
[ Upstream commit dbea75fe18f60e364de6d994fc938a24ba249d81 ] Commit a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") caused intel_pstate to use nonzero HWP desired values in certain usage scenarios, but it did not prevent them from being leaked into the confugirations in which HWP desired is expected to be 0. The failing scenarios are switching the driver from the passive mode to the active mode and starting a new kernel via kexec() while intel_pstate is running in the passive mode. To address this issue, ensure that HWP desired will be cleared on offline and suspend/shutdown. Fixes: a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") Reported-by: Julia Lawall <julia.lawall@inria.fr> Tested-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17PCI: Do not enable AtomicOps on VFsSelvin Xavier
[ Upstream commit 5ec0a6fcb60ea430f8ee7e0bec22db9b22f856d3 ] Host crashes when pci_enable_atomic_ops_to_root() is called for VFs with virtual buses. The virtual buses added to SR-IOV have bus->self set to NULL and host crashes due to this. PID: 4481 TASK: ffff89c6941b0000 CPU: 53 COMMAND: "bash" ... #3 [ffff9a9481713808] oops_end at ffffffffb9025cd6 #4 [ffff9a9481713828] page_fault_oops at ffffffffb906e417 #5 [ffff9a9481713888] exc_page_fault at ffffffffb9a0ad14 #6 [ffff9a94817138b0] asm_exc_page_fault at ffffffffb9c00ace [exception RIP: pcie_capability_read_dword+28] RIP: ffffffffb952fd5c RSP: ffff9a9481713960 RFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff89c6b1096000 RCX: 0000000000000000 RDX: ffff9a9481713990 RSI: 0000000000000024 RDI: 0000000000000000 RBP: 0000000000000080 R8: 0000000000000008 R9: ffff89c64341a2f8 R10: 0000000000000002 R11: 0000000000000000 R12: ffff89c648bab000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff89c648bab0c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff9a9481713988] pci_enable_atomic_ops_to_root at ffffffffb95359a6 #8 [ffff9a94817139c0] bnxt_qplib_determine_atomics at ffffffffc08c1a33 [bnxt_re] #9 [ffff9a94817139d0] bnxt_re_dev_init at ffffffffc08ba2d1 [bnxt_re] Per PCIe r5.0, sec 9.3.5.10, the AtomicOp Requester Enable bit in Device Control 2 is reserved for VFs. The PF value applies to all associated VFs. Return -EINVAL if pci_enable_atomic_ops_to_root() is called for a VF. Link: https://lore.kernel.org/r/1631354585-16597-1-git-send-email-selvin.xavier@broadcom.com Fixes: 35f5ace5dea4 ("RDMA/bnxt_re: Enable global atomic ops if platform supports") Fixes: 430a23689dea ("PCI: Add pci_enable_atomic_ops_to_root()") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17ataflop: remove ataflop_probe_lock mutexTetsuo Handa
[ Upstream commit 4ddb85d36613c45bde00d368bf9f357bd0708a0c ] Commit bf9c0538e485b591 ("ataflop: use a separate gendisk for each media format") introduced ataflop_probe_lock mutex, but forgot to unlock the mutex when atari_floppy_init() (i.e. module loading) succeeded. This will result in double lock deadlock if ataflop_probe() is called. Also, unregister_blkdev() must not be called from atari_floppy_init() with ataflop_probe_lock held when atari_floppy_init() failed, for ataflop_probe() waits for ataflop_probe_lock with major_names_lock held (i.e. AB-BA deadlock). __register_blkdev() needs to be called last in order to avoid calling ataflop_probe() when atari_floppy_init() is about to fail, for memory for completing already-started ataflop_probe() safely will be released as soon as atari_floppy_init() released ataflop_probe_lock mutex. As with commit 8b52d8be86d72308 ("loop: reorder loop_exit"), unregister_blkdev() needs to be called first in order to avoid calling ataflop_alloc_disk() from ataflop_probe() after del_gendisk() from atari_floppy_exit(). By relocating __register_blkdev() / unregister_blkdev() as explained above, we can remove ataflop_probe_lock mutex, for probe function and __exit function are serialized by major_names_lock mutex. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: bf9c0538e485b591 ("ataflop: use a separate gendisk for each media format") Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Link: https://lore.kernel.org/r/20211103230437.1639990-11-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17block/ataflop: provide a helper for cleanup up an atari diskLuis Chamberlain
[ Upstream commit deae1138d04758c7f8939fcb8aee330bc37e3015 ] Instead of using two separate code paths for cleaning up an atari disk, use one. We take the more careful approach to check for *all* disk types, as is done on exit. The init path didn't have that check as the alternative disk types are only probed for later, they are not initialized by default. Yes, there is a shared tag for all disks. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20210927220302.1073499-14-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17block/ataflop: add registration bool before calling del_gendisk()Luis Chamberlain
[ Upstream commit 573effb298011d3fcabc9b12025cf637f8a07911 ] The ataflop assumes del_gendisk() is safe to call, this is only true because add_disk() does not return a failure, but that will change soon. And so, before we get to adding error handling for that case, let's make sure we keep track of which disks actually get registered. Then we use this to only call del_gendisk for them. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20210927220302.1073499-13-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-16 15:02:04 +0000