| Age | Commit message (Collapse) | Author |
|---|
|
If we're in FILTER_SNAPSHOTS mode and we start scanning a range of the
keyspace where no keys are visible in the current snapshot, we have a
problem - we'll scan for a very long time before scanning terminates.
Awhile back, this was fixed for most cases with peek_upto() (and
assertions that enforce that it's being used).
But the fix missed the fact that the inodes btree is different - every
key offset is in a different snapshot tree, not just the inode field.
Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
(cherry picked from commit 204f45140faa0772d2ca1b3de96d1c0fb3db8e77)
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
(cherry picked from commit e7999235e6c437b99fad03d8301a4341be0d2bb5)
|
|
With the upcoming member seq patch, it's now critical that we don't ever
write to a superblock that hasn't been version downgraded - failure to
update member seq fields will cause split brain detection to fire
erroniously.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
(cherry picked from commit 447c1c01051251853e851bd77f26546488cbc7b7)
|
|
Calling fd_install() makes a file reachable for userland, including the
possibility to close the file descriptor, which leads to calling its
'release' hook. If that happens before the code had a chance to bump the
reference of the newly created task struct, the release callback will
call put_task_struct() too early, leading to the premature destruction
of the kernel thread.
Avoid that race by calling fd_install() later, after all the setup is
done.
Fixes: 1c6fdbd8f246 ("bcachefs: Initial commit")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
(cherry picked from commit dd839f31d7cd5e04f4111a219024268c6f6973f0)
|
|
The gcc compiler on paric does support the __int128 type, although the
architecture does not have native 128-bit support.
The effect is, that the bcachefs u128_square() function will pull in the
libgcc __multi3() helper, which breaks the kernel build when bcachefs is
built as module since this function isn't currently exported in
arch/parisc/kernel/parisc_ksyms.c.
The build failure can be seen in the latest debian kernel build at:
https://buildd.debian.org/status/fetch.php?pkg=linux&arch=hppa&ver=6.7.1-1%7Eexp1&stamp=1706132569&raw=0
We prefer to not export that symbol, so fall back to the optional 64-bit
implementation provided by bcachefs and thus avoid usage of __multi3().
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
(cherry picked from commit eba38cc7578bef94865341c73608bdf49193a51d)
|
|
Link: https://lore.kernel.org/r/20240304211551.833500257@linuxfoundation.org
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240305074649.580820283@linuxfoundation.org
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20240305112824.448003471@linuxfoundation.org
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This bug is present in v6.7 only, since the scheduler design has been
re-worked in v6.8.
Client scheduler entities must be flushed before an associated GPU
scheduler is teared down. Otherwise the entitiy might still hold a
pointer to the scheduler's runqueue which is freed at scheduler tear
down already.
[ 305.224293] ==================================================================
[ 305.224297] BUG: KASAN: slab-use-after-free in drm_sched_entity_flush+0x6c4/0x7b0 [gpu_sched]
[ 305.224310] Read of size 8 at addr ffff8881440a8f48 by task rmmod/4436
[ 305.224317] CPU: 10 PID: 4436 Comm: rmmod Tainted: G U 6.7.6-100.fc38.x86_64+debug #1
[ 305.224321] Hardware name: Dell Inc. Precision 7550/01PXFR, BIOS 1.27.0 11/08/2023
[ 305.224324] Call Trace:
[ 305.224327] <TASK>
[ 305.224329] dump_stack_lvl+0x76/0xd0
[ 305.224336] print_report+0xcf/0x670
[ 305.224342] ? drm_sched_entity_flush+0x6c4/0x7b0 [gpu_sched]
[ 305.224352] ? __virt_addr_valid+0x215/0x410
[ 305.224359] ? drm_sched_entity_flush+0x6c4/0x7b0 [gpu_sched]
[ 305.224368] kasan_report+0xa6/0xe0
[ 305.224373] ? drm_sched_entity_flush+0x6c4/0x7b0 [gpu_sched]
[ 305.224385] drm_sched_entity_flush+0x6c4/0x7b0 [gpu_sched]
[ 305.224395] ? __pfx_drm_sched_entity_flush+0x10/0x10 [gpu_sched]
[ 305.224406] ? rcu_is_watching+0x15/0xb0
[ 305.224413] drm_sched_entity_destroy+0x17/0x20 [gpu_sched]
[ 305.224422] nouveau_cli_fini+0x6c/0x120 [nouveau]
[ 305.224658] nouveau_drm_device_fini+0x2ac/0x490 [nouveau]
[ 305.224871] nouveau_drm_remove+0x18e/0x220 [nouveau]
[ 305.225082] ? __pfx_nouveau_drm_remove+0x10/0x10 [nouveau]
[ 305.225290] ? rcu_is_watching+0x15/0xb0
[ 305.225295] ? _raw_spin_unlock_irqrestore+0x66/0x80
[ 305.225299] ? trace_hardirqs_on+0x16/0x100
[ 305.225304] ? _raw_spin_unlock_irqrestore+0x4f/0x80
[ 305.225310] pci_device_remove+0xa3/0x1d0
[ 305.225316] device_release_driver_internal+0x379/0x540
[ 305.225322] driver_detach+0xc5/0x180
[ 305.225327] bus_remove_driver+0x11e/0x2a0
[ 305.225333] pci_unregister_driver+0x2a/0x250
[ 305.225339] nouveau_drm_exit+0x1f/0x970 [nouveau]
[ 305.225548] __do_sys_delete_module+0x350/0x580
[ 305.225554] ? __pfx___do_sys_delete_module+0x10/0x10
[ 305.225562] ? syscall_enter_from_user_mode+0x26/0x90
[ 305.225567] ? rcu_is_watching+0x15/0xb0
[ 305.225571] ? syscall_enter_from_user_mode+0x26/0x90
[ 305.225575] ? trace_hardirqs_on+0x16/0x100
[ 305.225580] do_syscall_64+0x61/0xe0
[ 305.225584] ? rcu_is_watching+0x15/0xb0
[ 305.225587] ? syscall_exit_to_user_mode+0x1f/0x50
[ 305.225592] ? trace_hardirqs_on_prepare+0xe3/0x100
[ 305.225596] ? do_syscall_64+0x70/0xe0
[ 305.225600] ? trace_hardirqs_on_prepare+0xe3/0x100
[ 305.225604] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 305.225609] RIP: 0033:0x7f6148f3592b
[ 305.225650] Code: 73 01 c3 48 8b 0d dd 04 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ad 04 0c 00 f7 d8 64 89 01 48
[ 305.225653] RSP: 002b:00007ffe89986f08 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ 305.225659] RAX: ffffffffffffffda RBX: 000055cbb036e900 RCX: 00007f6148f3592b
[ 305.225662] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055cbb036e968
[ 305.225664] RBP: 00007ffe89986f30 R08: 1999999999999999 R09: 0000000000000000
[ 305.225667] R10: 00007f6148fa6ac0 R11: 0000000000000206 R12: 0000000000000000
[ 305.225670] R13: 00007ffe89987190 R14: 000055cbb036e900 R15: 0000000000000000
[ 305.225678] </TASK>
[ 305.225683] Allocated by task 484:
[ 305.225685] kasan_save_stack+0x33/0x60
[ 305.225690] kasan_set_track+0x25/0x30
[ 305.225693] __kasan_kmalloc+0x8f/0xa0
[ 305.225696] drm_sched_init+0x3c7/0xce0 [gpu_sched]
[ 305.225705] nouveau_sched_init+0xd2/0x110 [nouveau]
[ 305.225913] nouveau_drm_device_init+0x130/0x3290 [nouveau]
[ 305.226121] nouveau_drm_probe+0x1ab/0x6b0 [nouveau]
[ 305.226329] local_pci_probe+0xda/0x190
[ 305.226333] pci_device_probe+0x23a/0x780
[ 305.226337] really_probe+0x3df/0xb80
[ 305.226341] __driver_probe_device+0x18c/0x450
[ 305.226345] driver_probe_device+0x4a/0x120
[ 305.226348] __driver_attach+0x1e5/0x4a0
[ 305.226351] bus_for_each_dev+0x106/0x190
[ 305.226355] bus_add_driver+0x2a1/0x570
[ 305.226358] driver_register+0x134/0x460
[ 305.226361] do_one_initcall+0xd3/0x430
[ 305.226366] do_init_module+0x238/0x770
[ 305.226370] load_module+0x5581/0x6f10
[ 305.226374] __do_sys_init_module+0x1f2/0x220
[ 305.226377] do_syscall_64+0x61/0xe0
[ 305.226381] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 305.226387] Freed by task 4436:
[ 305.226389] kasan_save_stack+0x33/0x60
[ 305.226392] kasan_set_track+0x25/0x30
[ 305.226396] kasan_save_free_info+0x2b/0x50
[ 305.226399] __kasan_slab_free+0x10b/0x1a0
[ 305.226402] slab_free_freelist_hook+0x12b/0x1e0
[ 305.226406] __kmem_cache_free+0xd4/0x1d0
[ 305.226410] drm_sched_fini+0x178/0x320 [gpu_sched]
[ 305.226418] nouveau_drm_device_fini+0x2a0/0x490 [nouveau]
[ 305.226624] nouveau_drm_remove+0x18e/0x220 [nouveau]
[ 305.226832] pci_device_remove+0xa3/0x1d0
[ 305.226836] device_release_driver_internal+0x379/0x540
[ 305.226840] driver_detach+0xc5/0x180
[ 305.226843] bus_remove_driver+0x11e/0x2a0
[ 305.226847] pci_unregister_driver+0x2a/0x250
[ 305.226850] nouveau_drm_exit+0x1f/0x970 [nouveau]
[ 305.227056] __do_sys_delete_module+0x350/0x580
[ 305.227060] do_syscall_64+0x61/0xe0
[ 305.227064] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 305.227070] The buggy address belongs to the object at ffff8881440a8f00
which belongs to the cache kmalloc-128 of size 128
[ 305.227073] The buggy address is located 72 bytes inside of
freed 128-byte region [ffff8881440a8f00, ffff8881440a8f80)
[ 305.227078] The buggy address belongs to the physical page:
[ 305.227081] page:00000000627efa0a refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1440a8
[ 305.227085] head:00000000627efa0a order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 305.227088] flags: 0x17ffffc0000840(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
[ 305.227093] page_type: 0xffffffff()
[ 305.227097] raw: 0017ffffc0000840 ffff8881000428c0 ffffea0005b33500 dead000000000002
[ 305.227100] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
[ 305.227102] page dumped because: kasan: bad access detected
[ 305.227106] Memory state around the buggy address:
[ 305.227109] ffff8881440a8e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 305.227112] ffff8881440a8e80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 305.227114] >ffff8881440a8f00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 305.227117] ^
[ 305.227120] ffff8881440a8f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 305.227122] ffff8881440a9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc
[ 305.227125] ==================================================================
Cc: <stable@vger.kernel.org> # v6.7 only
Reported-by: Karol Herbst <kherbst@redhat.com>
Closes: https://gist.githubusercontent.com/karolherbst/a20eb0f937a06ed6aabe2ac2ca3d11b5/raw/9cd8b1dc5894872d0eeebbee3dd0fdd28bb576bc/gistfile1.txt
Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7092dbee23282b6fcf1313fc64e2b92649ee16e8 upstream.
Now both a v4 address and a v4-mapped address are supported when
destroying a userspace pm subflow, this patch adds a second subflow
to "userspace pm add & remove address" test, and two subflows could
be removed two different ways, one with the v4mapped and one with v4.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387
Fixes: 48d73f609dcc ("selftests: mptcp: update userspace pm addr tests")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-2-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b850f2c7dd85ecd14a333685c4ffd23f12665e94 upstream.
To avoid duplicated code in different MPTCP selftests, we can add
and use helpers defined in mptcp_lib.sh.
is_v6() helper is defined in mptcp_connect.sh, mptcp_join.sh and
mptcp_sockopt.sh, so export it into mptcp_lib.sh and rename it as
mptcp_lib_is_v6(). Use this new helper in all scripts.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-10-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 757c828ce94905a2975873d5e90a376c701b2b90 upstream.
This patch adds a new argument namespace to userspace_pm_add_addr() and
userspace_pm_add_sf() to make these two helper more versatile.
Add two more versatile helpers for userspace pm remove subflow or address:
userspace_pm_rm_addr() and userspace_pm_rm_sf(). The original test helpers
userspace_pm_rm_sf_addr_ns1() and userspace_pm_rm_sf_addr_ns2() can be
replaced by these new helpers.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-4-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 80775412882e273b8ef62124fae861cde8e6fb3d upstream.
This patch adds a new helper chk_subflows_total(), in it use the newly
added counter mptcpi_subflows_total to get the "correct" amount of
subflows, including the initial one.
To be compatible with old 'ss' or kernel versions not supporting this
counter, get the total subflows by listing TCP connections that are
MPTCP subflows:
ss -ti state state established state syn-sent state syn-recv |
grep -c tcp-ulp-mptcp.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-3-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 06848c0f341ee3f9226ed01e519c72e4d2b6f001 upstream.
This patch adds a new helper get_info_value(), using 'sed' command to
parse the value of the given item name in the line with the given keyword,
to make chk_mptcp_info() and pedit_action_pkts() more readable.
Also add another helper evts_get_info() to use get_info_value() to parse
the output of 'pm_nl_ctl events' command, to make all the userspace pm
selftests more readable, both in mptcp_join.sh and userspace_pm.sh.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-2-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 43fb862de8f628c5db5e96831c915b9aebf62d33 upstream.
During VMentry VERW is executed to mitigate MDS. After VERW, any memory
access like register push onto stack may put host data in MDS affected
CPU buffers. A guest can then use MDS to sample host data.
Although likelihood of secrets surviving in registers at current VERW
callsite is less, but it can't be ruled out. Harden the MDS mitigation
by moving the VERW mitigation late in VMentry path.
Note that VERW for MMIO Stale Data mitigation is unchanged because of
the complexity of per-guest conditional VERW which is not easy to handle
that late in asm with no GPRs available. If the CPU is also affected by
MDS, VERW is unconditionally executed late in asm regardless of guest
having MMIO access.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-6-a6216d83edb7%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
From: Sean Christopherson <seanjc@google.com>
commit 706a189dcf74d3b3f955e9384785e726ed6c7c80 upstream.
Use EFLAGS.CF instead of EFLAGS.ZF to track whether to use VMRESUME versus
VMLAUNCH. Freeing up EFLAGS.ZF will allow doing VERW, which clobbers ZF,
for MDS mitigations as late as possible without needing to duplicate VERW
for both paths.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-5-a6216d83edb7%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6613d82e617dd7eb8b0c40b2fe3acea655b1d611 upstream.
The VERW mitigation at exit-to-user is enabled via a static branch
mds_user_clear. This static branch is never toggled after boot, and can
be safely replaced with an ALTERNATIVE() which is convenient to use in
asm.
Switch to ALTERNATIVE() to use the VERW mitigation late in exit-to-user
path. Also remove the now redundant VERW in exc_nmi() and
arch_exit_to_user_mode().
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-4-a6216d83edb7%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a0e2dab44d22b913b4c228c8b52b2a104434b0b3 upstream.
As done for entry_64, add support for executing VERW late in exit to
user path for 32-bit mode.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-3-a6216d83edb7%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3c7501722e6b31a6e56edd23cea5e77dbb9ffd1a upstream.
Mitigation for MDS is to use VERW instruction to clear any secrets in
CPU Buffers. Any memory accesses after VERW execution can still remain
in CPU buffers. It is safer to execute VERW late in return to user path
to minimize the window in which kernel data can end up in CPU buffers.
There are not many kernel secrets to be had after SWITCH_TO_USER_CR3.
Add support for deploying VERW mitigation after user register state is
restored. This helps minimize the chances of kernel data ending up into
CPU buffers after executing VERW.
Note that the mitigation at the new location is not yet enabled.
Corner case not handled
=======================
Interrupts returning to kernel don't clear CPUs buffers since the
exit-to-user path is expected to do that anyways. But, there could be
a case when an NMI is generated in kernel after the exit-to-user path
has cleared the buffers. This case is not handled and NMI returning to
kernel don't clear CPU buffers because:
1. It is rare to get an NMI after VERW, but before returning to userspace.
2. For an unprivileged user, there is no known way to make that NMI
less rare or target it.
3. It would take a large number of these precisely-timed NMIs to mount
an actual attack. There's presumably not enough bandwidth.
4. The NMI in question occurs after a VERW, i.e. when user state is
restored and most interesting data is already scrubbed. Whats left
is only the data that NMI touches, and that may or may not be of
any interest.
[ pawan: resolved conflict for hunk swapgs_restore_regs_and_return_to_usermode in backport ]
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-2-a6216d83edb7%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7838b4656110d950afdd92a081cc0f33e23e0ea8 ]
In commit 19416123ab3e ("block: define 'struct bvec_iter' as packed"),
what we need is to save the 4byte padding, and avoid `bio` to spread on
one extra cache line.
It is enough to define it as '__packed __aligned(4)', as '__packed'
alone means byte aligned, and can cause compiler to generate horrible
code on architectures that don't support unaligned access in case that
bvec_iter is embedded in other structures.
Cc: Mikulas Patocka <mpatocka@redhat.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 19416123ab3e ("block: define 'struct bvec_iter' as packed")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ec5c54a9d3c4f9c15e647b049fea401ee5258696 ]
Hogs are added *after* ACPI so should be removed *before* in error path.
Fixes: a411e81e61df ("gpiolib: add hogs support for machine code")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e4aec4daa8c009057b5e063db1b7322252c92dc8 ]
After shuffling the code, error path wasn't updated correctly.
Fix it here.
Fixes: 2f4133bb5f14 ("gpiolib: No need to call gpiochip_remove_pin_ranges() twice")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 530b1dbd97846b110ea8a94c7cc903eca21786e5 ]
Chip outputs are enabled[1] before actual reset is performed[2] which might
cause pin output value to flip flop if previous pin value was set to 1.
Fix that behavior by making sure chip is fully reset before all outputs are
enabled.
Flip-flop can be noticed when module is removed and inserted again and one of
the pins was changed to 1 before removal. 100 microsecond flipping is
noticeable on oscilloscope (100khz SPI bus).
For a properly reset chip - output is enabled around 100 microseconds (on 100khz
SPI bus) later during probing process hence should be irrelevant behavioral
change.
Fixes: 7ebc194d0fd4 (gpio: 74x164: Introduce 'enable-gpios' property)
Link: https://elixir.bootlin.com/linux/v6.7.4/source/drivers/gpio/gpio-74x164.c#L130 [1]
Link: https://elixir.bootlin.com/linux/v6.7.4/source/drivers/gpio/gpio-74x164.c#L150 [2]
Signed-off-by: Arturas Moskvinas <arturas.moskvinas@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fad87dbd48156ab940538f052f1820f4b6ed2819 ]
The PAPR spec spells the function name as
"ibm,reset-pe-dma-windows"
but in practice firmware uses the singular form:
"ibm,reset-pe-dma-window"
in the device tree. Since we have the wrong spelling in the RTAS
function table, reverse lookups (token -> name) fail and warn:
unexpected failed lookup for token 86
WARNING: CPU: 1 PID: 545 at arch/powerpc/kernel/rtas.c:659 __do_enter_rtas_trace+0x2a4/0x2b4
CPU: 1 PID: 545 Comm: systemd-udevd Not tainted 6.8.0-rc4 #30
Hardware name: IBM,9105-22A POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NL1060_028) hv:phyp pSeries
NIP [c0000000000417f0] __do_enter_rtas_trace+0x2a4/0x2b4
LR [c0000000000417ec] __do_enter_rtas_trace+0x2a0/0x2b4
Call Trace:
__do_enter_rtas_trace+0x2a0/0x2b4 (unreliable)
rtas_call+0x1f8/0x3e0
enable_ddw.constprop.0+0x4d0/0xc84
dma_iommu_dma_supported+0xe8/0x24c
dma_set_mask+0x5c/0xd8
mlx5_pci_init.constprop.0+0xf0/0x46c [mlx5_core]
probe_one+0xfc/0x32c [mlx5_core]
local_pci_probe+0x68/0x12c
pci_call_probe+0x68/0x1ec
pci_device_probe+0xbc/0x1a8
really_probe+0x104/0x570
__driver_probe_device+0xb8/0x224
driver_probe_device+0x54/0x130
__driver_attach+0x158/0x2b0
bus_for_each_dev+0xa8/0x120
driver_attach+0x34/0x48
bus_add_driver+0x174/0x304
driver_register+0x8c/0x1c4
__pci_register_driver+0x68/0x7c
mlx5_init+0xb8/0x118 [mlx5_core]
do_one_initcall+0x60/0x388
do_init_module+0x7c/0x2a4
init_module_from_file+0xb4/0x108
idempotent_init_module+0x184/0x34c
sys_finit_module+0x90/0x114
And oopses are possible when lockdep is enabled or the RTAS
tracepoints are active, since those paths dereference the result of
the lookup.
Use the correct spelling to match firmware's behavior, adjusting the
related constants to match.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 8252b88294d2 ("powerpc/rtas: improve function information lookups")
Reported-by: Gaurav Batra <gbatra@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240222-rtas-fix-ibm-reset-pe-dma-window-v1-1-7aaf235ac63c@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 09a3c1e46142199adcee372a420b024b4fc61051 ]
When kdump kernel tries to copy dump data over SR-IOV, LPAR panics due
to NULL pointer exception:
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc000000020847ad4
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: mlx5_core(+) vmx_crypto pseries_wdt papr_scm libnvdimm mlxfw tls psample sunrpc fuse overlay squashfs loop
CPU: 12 PID: 315 Comm: systemd-udevd Not tainted 6.4.0-Test102+ #12
Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries
NIP: c000000020847ad4 LR: c00000002083b2dc CTR: 00000000006cd18c
REGS: c000000029162ca0 TRAP: 0300 Not tainted (6.4.0-Test102+)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48288244 XER: 00000008
CFAR: c00000002083b2d8 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1
...
NIP _find_next_zero_bit+0x24/0x110
LR bitmap_find_next_zero_area_off+0x5c/0xe0
Call Trace:
dev_printk_emit+0x38/0x48 (unreliable)
iommu_area_alloc+0xc4/0x180
iommu_range_alloc+0x1e8/0x580
iommu_alloc+0x60/0x130
iommu_alloc_coherent+0x158/0x2b0
dma_iommu_alloc_coherent+0x3c/0x50
dma_alloc_attrs+0x170/0x1f0
mlx5_cmd_init+0xc0/0x760 [mlx5_core]
mlx5_function_setup+0xf0/0x510 [mlx5_core]
mlx5_init_one+0x84/0x210 [mlx5_core]
probe_one+0x118/0x2c0 [mlx5_core]
local_pci_probe+0x68/0x110
pci_call_probe+0x68/0x200
pci_device_probe+0xbc/0x1a0
really_probe+0x104/0x540
__driver_probe_device+0xb4/0x230
driver_probe_device+0x54/0x130
__driver_attach+0x158/0x2b0
bus_for_each_dev+0xa8/0x130
driver_attach+0x34/0x50
bus_add_driver+0x16c/0x300
driver_register+0xa4/0x1b0
__pci_register_driver+0x68/0x80
mlx5_init+0xb8/0x100 [mlx5_core]
do_one_initcall+0x60/0x300
do_init_module+0x7c/0x2b0
At the time of LPAR dump, before kexec hands over control to kdump
kernel, DDWs (Dynamic DMA Windows) are scanned and added to the FDT.
For the SR-IOV case, default DMA window "ibm,dma-window" is removed from
the FDT and DDW added, for the device.
Now, kexec hands over control to the kdump kernel.
When the kdump kernel initializes, PCI busses are scanned and IOMMU
group/tables created, in pci_dma_bus_setup_pSeriesLP(). For the SR-IOV
case, there is no "ibm,dma-window". The original commit: b1fc44eaa9ba,
fixes the path where memory is pre-mapped (direct mapped) to the DDW.
When TCEs are direct mapped, there is no need to initialize IOMMU
tables.
iommu_table_setparms_lpar() only considers "ibm,dma-window" property
when initiallizing IOMMU table. In the scenario where TCEs are
dynamically allocated for SR-IOV, newly created IOMMU table is not
initialized. Later, when the device driver tries to enter TCEs for the
SR-IOV device, NULL pointer execption is thrown from iommu_area_alloc().
The fix is to initialize the IOMMU table with DDW property stored in the
FDT. There are 2 points to remember:
1. For the dedicated adapter, kdump kernel would encounter both
default and DDW in FDT. In this case, DDW property is used to
initialize the IOMMU table.
2. A DDW could be direct or dynamic mapped. kdump kernel would
initialize IOMMU table and mark the existing DDW as
"dynamic". This works fine since, at the time of table
initialization, iommu_table_clear() makes some space in the
DDW, for some predefined number of TCEs which are needed for
kdump to succeed.
Fixes: b1fc44eaa9ba ("pseries/iommu/ddw: Fix kdump to work in absence of ibm,dma-window")
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240125203017.61014-1-gbatra@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d3ea125df37dc37972d581b74a5d3785c3f283ab ]
If CONFIG_HARDENED_USERCOPY is enabled, copying completion record from
event log cache to user triggers a kernel bug.
[ 1987.159822] usercopy: Kernel memory exposure attempt detected from SLUB object 'dsa0' (offset 74, size 31)!
[ 1987.170845] ------------[ cut here ]------------
[ 1987.176086] kernel BUG at mm/usercopy.c:102!
[ 1987.180946] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 1987.186866] CPU: 17 PID: 528 Comm: kworker/17:1 Not tainted 6.8.0-rc2+ #5
[ 1987.194537] Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023
[ 1987.206405] Workqueue: wq0.0 idxd_evl_fault_work [idxd]
[ 1987.212338] RIP: 0010:usercopy_abort+0x72/0x90
[ 1987.217381] Code: 58 65 9c 50 48 c7 c2 17 85 61 9c 57 48 c7 c7 98 fd 6b 9c 48 0f 44 d6 48 c7 c6 b3 08 62 9c 4c 89 d1 49 0f 44 f3 e8 1e 2e d5 ff <0f> 0b 49 c7 c1 9e 42 61 9c 4c 89 cf 4d 89 c8 eb a9 66 66 2e 0f 1f
[ 1987.238505] RSP: 0018:ff62f5cf20607d60 EFLAGS: 00010246
[ 1987.244423] RAX: 000000000000005f RBX: 000000000000001f RCX: 0000000000000000
[ 1987.252480] RDX: 0000000000000000 RSI: ffffffff9c61429e RDI: 00000000ffffffff
[ 1987.260538] RBP: ff62f5cf20607d78 R08: ff2a6a89ef3fffe8 R09: 00000000fffeffff
[ 1987.268595] R10: ff2a6a89eed00000 R11: 0000000000000003 R12: ff2a66934849c89a
[ 1987.276652] R13: 0000000000000001 R14: ff2a66934849c8b9 R15: ff2a66934849c899
[ 1987.284710] FS: 0000000000000000(0000) GS:ff2a66b22fe40000(0000) knlGS:0000000000000000
[ 1987.293850] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1987.300355] CR2: 00007fe291a37000 CR3: 000000010fbd4005 CR4: 0000000000f71ef0
[ 1987.308413] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1987.316470] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 1987.324527] PKRU: 55555554
[ 1987.327622] Call Trace:
[ 1987.330424] <TASK>
[ 1987.332826] ? show_regs+0x6e/0x80
[ 1987.336703] ? die+0x3c/0xa0
[ 1987.339988] ? do_trap+0xd4/0xf0
[ 1987.343662] ? do_error_trap+0x75/0xa0
[ 1987.347922] ? usercopy_abort+0x72/0x90
[ 1987.352277] ? exc_invalid_op+0x57/0x80
[ 1987.356634] ? usercopy_abort+0x72/0x90
[ 1987.360988] ? asm_exc_invalid_op+0x1f/0x30
[ 1987.365734] ? usercopy_abort+0x72/0x90
[ 1987.370088] __check_heap_object+0xb7/0xd0
[ 1987.374739] __check_object_size+0x175/0x2d0
[ 1987.379588] idxd_copy_cr+0xa9/0x130 [idxd]
[ 1987.384341] idxd_evl_fault_work+0x127/0x390 [idxd]
[ 1987.389878] process_one_work+0x13e/0x300
[ 1987.394435] ? __pfx_worker_thread+0x10/0x10
[ 1987.399284] worker_thread+0x2f7/0x420
[ 1987.403544] ? _raw_spin_unlock_irqrestore+0x2b/0x50
[ 1987.409171] ? __pfx_worker_thread+0x10/0x10
[ 1987.414019] kthread+0x107/0x140
[ 1987.417693] ? __pfx_kthread+0x10/0x10
[ 1987.421954] ret_from_fork+0x3d/0x60
[ 1987.426019] ? __pfx_kthread+0x10/0x10
[ 1987.430281] ret_from_fork_asm+0x1b/0x30
[ 1987.434744] </TASK>
The issue arises because event log cache is created using
kmem_cache_create() which is not suitable for user copy.
Fix the issue by creating event log cache with
kmem_cache_create_usercopy(), ensuring safe user copy.
Fixes: c2f156bf168f ("dmaengine: idxd: create kmem cache for event log fault items")
Reported-by: Tony Zhu <tony.zhu@intel.com>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Lijun Pan <lijun.pan@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240209191412.1050270-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ecec7c9f29a7114a3e23a14020b1149ea7dffb4f ]
head is defined in idxd->evl as a shadow of head in the EVLSTATUS register.
There are two issues related to the shadow head:
1. Mismatch between the shadow head and the state of the EVLSTATUS
register:
If Event Log is supported, upon completion of the Enable Device command,
the Event Log head in the variable idxd->evl->head should be cleared to
match the state of the EVLSTATUS register. But the variable is not reset
currently, leading mismatch between the variable and the register state.
The mismatch causes incorrect processing of Event Log entries.
2. Unnecessary shadow head definition:
The shadow head is unnecessary as head can be read directly from the
EVLSTATUS register. Reading head from the register incurs no additional
cost because event log head and tail are always read together and
tail is already read directly from the register as required by hardware.
Remove the shadow Event Log head stored in idxd->evl to address the
mentioned issues.
Fixes: 244da66cda35 ("dmaengine: idxd: setup event log configuration")
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240215024931.1739621-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d4c08d8b23b22807c712208cd05cb047e92e7672 ]
The MSM8996 platform has registers setup different to the rest of QMP v3
USB platforms. It has PCS region at 0x600 and no PCS_MISC region, while
other platforms have PCS region at 0x800 and PCS_MISC at 0x600. This
results in the malfunctioning USB host on some of the platforms. The
commit f74c35b630d4 ("phy: qcom-qmp-usb: fix register offsets for
ipq8074/ipq6018") fixed the issue for IPQ platforms, but missed the
SDM845 which has the same register layout.
To simplify future platform addition and to make the driver more future
proof, rename qmp_usb_offsets_v3 to qmp_usb_offsets_v3_msm8996 (to mark
its peculiarity), rename qmp_usb_offsets_ipq8074 to qmp_usb_offsets_v3
and use it for SDM845 platform.
Fixes: 2be22aae6b18 ("phy: qcom-qmp-usb: populate offsets configuration")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240213133824.2218916-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 95055beb067cb30f626fb10f7019737ca7681df0 ]
It should be 'qphy->vreg' passed to PTR_ERR() when devm_regulator_get() fails.
Fixes: 08e49af50701 ("phy: qcom: Introduce M31 USB PHY driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20230824091345.1072650-1-yangyingliang@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7936378cb6d87073163130e1e1fc1e5f76a597cf ]
Devicetree spec lists only dashes as valid characters for alias names.
Table 3.2: Valid characters for alias names, Devicee Specification,
Release v0.4
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Fixes: 3fbae284887de ("phy: freescale: phy-fsl-imx8-mipi-dphy: Add i.MX8qxp LVDS PHY mode support")
Link: https://lore.kernel.org/r/20240110093343.468810-1-alexander.stein@ew.tq-group.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
remote setup
[ Upstream commit bbcc1c83f343e580c3aa1f2a8593343bf7b55bba ]
The Linked list element and pointer are not stored in the same memory as
the eDMA controller register. If the doorbell register is toggled before
the full write of the linked list a race condition error will occur.
In remote setup we can only use a readl to the memory to assure the full
write has occurred.
Fixes: 7e4b8a4fbe2c ("dmaengine: Add Synopsys eDMA IP version 0 support")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240129-b4-feature_hdma_mainline-v7-6-8e8c1acb7a46@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
remote setup
[ Upstream commit 712a92a48158e02155b4b6b21e03a817f78c9b7e ]
The Linked list element and pointer are not stored in the same memory as
the HDMA controller register. If the doorbell register is toggled before
the full write of the linked list a race condition error will occur.
In remote setup we can only use a readl to the memory to assure the full
write has occurred.
Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240129-b4-feature_hdma_mainline-v7-5-8e8c1acb7a46@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e2f6a5789051ee9c632f27a12d0f01f0cbf78aac ]
Only the local interruption was configured, remote interrupt was left
behind. This patch fix it by setting stop and abort remote interrupts when
the DW_EDMA_CHIP_LOCAL flag is not set.
Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240129-b4-feature_hdma_mainline-v7-4-8e8c1acb7a46@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 930a8a015dcfde4b8906351ff081066dc277748c ]
Fix "HDMA_V0_REMOTEL_STOP_INT_EN" typo error
Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240129-b4-feature_hdma_mainline-v7-3-8e8c1acb7a46@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7b52ba8616e978bf4f38f207f11a8176517244d0 ]
Instead of setting HDMA_V0_LOCAL_ABORT_INT_EN bit, HDMA_V0_LOCAL_STOP_INT_EN
bit got set twice, due to which the abort interrupt is not getting generated for
HDMA. Fix it by setting the correct interrupt enable bit.
Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240129-b4-feature_hdma_mainline-v7-2-8e8c1acb7a46@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cd665bfc757c71e9b7e0abff0f362d8abd38a805 ]
The current check of ch_en enabled to know the maximum number of available
hardware channels is wrong as it check the number of ch_en register set
but all of them are unset at probe. This register is set at the
dw_hdma_v0_core_start function which is run lately before a DMA transfer.
The HDMA IP have no way to know the number of hardware channels available
like the eDMA IP, then let set it to maximum channels and let the platform
set the right number of channels.
Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240129-b4-feature_hdma_mainline-v7-1-8e8c1acb7a46@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4703b014f28bf7a2e56d1da238ee95ef6c5ce76b upstream.
It looks like the "!" character was added accidentally. The
regmap_update_bits_check() function is normally going to succeed. This
means the rest of the function is unreachable and we don't handle the
situation where "changed" is true correctly.
Fixes: 07f7d6e7a124 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/0c254c07-d1c0-4a5c-a22b-7e135cab032c@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aa82ac51d63328714645c827775d64dbfd9941f3 upstream.
syzbot reported another task hung in __unix_gc(). [0]
The current while loop assumes that all of the left candidates
have oob_skb and calling kfree_skb(oob_skb) releases the remaining
candidates.
However, I missed a case that oob_skb has self-referencing fd and
another fd and the latter sk is placed before the former in the
candidate list. Then, the while loop never proceeds, resulting
the task hung.
__unix_gc() has the same loop just before purging the collected skb,
so we can call kfree_skb(oob_skb) there and let __skb_queue_purge()
release all inflight sockets.
[0]:
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 2784 Comm: kworker/u4:8 Not tainted 6.8.0-rc4-syzkaller-01028-g71b605d32017 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Workqueue: events_unbound __unix_gc
RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x70 kernel/kcov.c:200
Code: 89 fb e8 23 00 00 00 48 8b 3d 84 f5 1a 0c 48 89 de 5b e9 43 26 57 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 <f3> 0f 1e fa 48 8b 04 24 65 48 8b 0d 90 52 70 7e 65 8b 15 91 52 70
RSP: 0018:ffffc9000a17fa78 EFLAGS: 00000287
RAX: ffffffff8a0a6108 RBX: ffff88802b6c2640 RCX: ffff88802c0b3b80
RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000
RBP: ffffc9000a17fbf0 R08: ffffffff89383f1d R09: 1ffff1100ee5ff84
R10: dffffc0000000000 R11: ffffed100ee5ff85 R12: 1ffff110056d84ee
R13: ffffc9000a17fae0 R14: 0000000000000000 R15: ffffffff8f47b840
FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffef5687ff8 CR3: 0000000029b34000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<NMI>
</NMI>
<TASK>
__unix_gc+0xe69/0xf40 net/unix/garbage.c:343
process_one_work kernel/workqueue.c:2633 [inline]
process_scheduled_works+0x913/0x1420 kernel/workqueue.c:2706
worker_thread+0xa5f/0x1000 kernel/workqueue.c:2787
kthread+0x2ef/0x390 kernel/kthread.c:388
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242
</TASK>
Reported-and-tested-by: syzbot+ecab4d36f920c3574bf9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ecab4d36f920c3574bf9
Fixes: 25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 25236c91b5ab4a26a56ba2e79b8060cf4e047839 upstream.
syzbot reported a task hung; at the same time, GC was looping infinitely
in list_for_each_entry_safe() for OOB skb. [0]
syzbot demonstrated that the list_for_each_entry_safe() was not actually
safe in this case.
A single skb could have references for multiple sockets. If we free such
a skb in the list_for_each_entry_safe(), the current and next sockets could
be unlinked in a single iteration.
unix_notinflight() uses list_del_init() to unlink the socket, so the
prefetched next socket forms a loop itself and list_for_each_entry_safe()
never stops.
Here, we must use while() and make sure we always fetch the first socket.
[0]:
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 5065 Comm: syz-executor236 Not tainted 6.8.0-rc3-syzkaller-00136-g1f719a2f3fa6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
RIP: 0010:preempt_count arch/x86/include/asm/preempt.h:26 [inline]
RIP: 0010:check_kcov_mode kernel/kcov.c:173 [inline]
RIP: 0010:__sanitizer_cov_trace_pc+0xd/0x60 kernel/kcov.c:207
Code: cc cc cc cc 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 65 48 8b 14 25 40 c2 03 00 <65> 8b 05 b4 7c 78 7e a9 00 01 ff 00 48 8b 34 24 74 0f f6 c4 01 74
RSP: 0018:ffffc900033efa58 EFLAGS: 00000283
RAX: ffff88807b077800 RBX: ffff88807b077800 RCX: 1ffffffff27b1189
RDX: ffff88802a5a3b80 RSI: ffffffff8968488d RDI: ffff88807b077f70
RBP: ffffc900033efbb0 R08: 0000000000000001 R09: fffffbfff27a900c
R10: ffffffff93d48067 R11: ffffffff8ae000eb R12: ffff88807b077800
R13: dffffc0000000000 R14: ffff88807b077e40 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000564f4fc1e3a8 CR3: 000000000d57a000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<NMI>
</NMI>
<TASK>
unix_gc+0x563/0x13b0 net/unix/garbage.c:319
unix_release_sock+0xa93/0xf80 net/unix/af_unix.c:683
unix_release+0x91/0xf0 net/unix/af_unix.c:1064
__sock_release+0xb0/0x270 net/socket.c:659
sock_close+0x1c/0x30 net/socket.c:1421
__fput+0x270/0xb80 fs/file_table.c:376
task_work_run+0x14f/0x250 kernel/task_work.c:180
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0xa8a/0x2ad0 kernel/exit.c:871
do_group_exit+0xd4/0x2a0 kernel/exit.c:1020
__do_sys_exit_group kernel/exit.c:1031 [inline]
__se_sys_exit_group kernel/exit.c:1029 [inline]
__x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1029
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd5/0x270 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6f/0x77
RIP: 0033:0x7f9d6cbdac09
Code: Unable to access opcode bytes at 0x7f9d6cbdabdf.
RSP: 002b:00007fff5952feb8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9d6cbdac09
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
RBP: 00007f9d6cc552b0 R08: ffffffffffffffb8 R09: 0000000000000006
R10: 0000000000000006 R11: 0000000000000246 R12: 00007f9d6cc552b0
R13: 0000000000000000 R14: 00007f9d6cc55d00 R15: 00007f9d6cbabe70
</TASK>
Reported-by: syzbot+4fa4a2d1f5a5ee06f006@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4fa4a2d1f5a5ee06f006
Fixes: 1279f9d9dec2 ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240209220453.96053-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
when AOP_WRITEPAGE_ACTIVATE is returned (as NFS does when it detects
congestion) it is important that the folio is redirtied.
nfs_writepage_locked() doesn't do this, so files can become corrupted as
writes can be lost.
Note that this is not needed in v6.8 as AOP_WRITEPAGE_ACTIVATE cannot be
returned. It is needed for kernels v5.18..v6.7. Prior to 6.3 the patch
is different as it needs to mention "page", not "folio".
Reported-and-tested-by: Jacek Tomaka <Jacek.Tomaka@poczta.fm>
Fixes: 6df25e58532b ("nfs: remove reliance on bdi congestion")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7a29fa05aeca2c16193f00a883c56ffc7c25b6c5 upstream.
The core twl chip is probed via i2c and the dev->driver->of_match_table is
NULL, causing the driver to fail to probe.
This partially reverts:
commit 1e0c866887f4 ("mfd: Use device_get_match_data() in a bunch of drivers")
Fixes: 1e0c866887f4 ("mfd: Use device_get_match_data() in a bunch of drivers")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20231029114843.15553-1-peter.ujfalusi@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d6a9608af9a75d13243d217f6ce1e30e57d56ffe upstream.
Syzbot and Eric reported a lockdep splat in the subflow diag:
WARNING: possible circular locking dependency detected
6.8.0-rc4-syzkaller-00212-g40b9385dd8e6 #0 Not tainted
syz-executor.2/24141 is trying to acquire lock:
ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at:
tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline]
ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at:
tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137
but task is already holding lock:
ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at: spin_lock
include/linux/spinlock.h:351 [inline]
ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at:
inet_diag_dump_icsk+0x39f/0x1f80 net/ipv4/inet_diag.c:1038
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&h->lhash2[i].lock){+.+.}-{2:2}:
lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:351 [inline]
__inet_hash+0x335/0xbe0 net/ipv4/inet_hashtables.c:743
inet_csk_listen_start+0x23a/0x320 net/ipv4/inet_connection_sock.c:1261
__inet_listen_sk+0x2a2/0x770 net/ipv4/af_inet.c:217
inet_listen+0xa3/0x110 net/ipv4/af_inet.c:239
rds_tcp_listen_init+0x3fd/0x5a0 net/rds/tcp_listen.c:316
rds_tcp_init_net+0x141/0x320 net/rds/tcp.c:577
ops_init+0x352/0x610 net/core/net_namespace.c:136
__register_pernet_operations net/core/net_namespace.c:1214 [inline]
register_pernet_operations+0x2cb/0x660 net/core/net_namespace.c:1283
register_pernet_device+0x33/0x80 net/core/net_namespace.c:1370
rds_tcp_init+0x62/0xd0 net/rds/tcp.c:735
do_one_initcall+0x238/0x830 init/main.c:1236
do_initcall_level+0x157/0x210 init/main.c:1298
do_initcalls+0x3f/0x80 init/main.c:1314
kernel_init_freeable+0x42f/0x5d0 init/main.c:1551
kernel_init+0x1d/0x2a0 init/main.c:1441
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242
-> #0 (k-sk_lock-AF_INET6){+.+.}-{0:0}:
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869
__lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137
lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754
lock_sock_fast include/net/sock.h:1723 [inline]
subflow_get_info+0x166/0xd20 net/mptcp/diag.c:28
tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline]
tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137
inet_sk_diag_fill+0x10ed/0x1e00 net/ipv4/inet_diag.c:345
inet_diag_dump_icsk+0x55b/0x1f80 net/ipv4/inet_diag.c:1061
__inet_diag_dump+0x211/0x3a0 net/ipv4/inet_diag.c:1263
inet_diag_dump_compat+0x1c1/0x2d0 net/ipv4/inet_diag.c:1371
netlink_dump+0x59b/0xc80 net/netlink/af_netlink.c:2264
__netlink_dump_start+0x5df/0x790 net/netlink/af_netlink.c:2370
netlink_dump_start include/linux/netlink.h:338 [inline]
inet_diag_rcv_msg_compat+0x209/0x4c0 net/ipv4/inet_diag.c:1405
sock_diag_rcv_msg+0xe7/0x410
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543
sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280
netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367
netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
do_syscall_64+0xf9/0x240
entry_SYSCALL_64_after_hwframe+0x6f/0x77
As noted by Eric we can break the lock dependency chain avoid
dumping any extended info for the mptcp subflow listener:
nothing actually useful is presented there.
Fixes: b8adb69a7d29 ("mptcp: fix lockless access in subflow ULP diag")
Cc: stable@vger.kernel.org
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/netdev/CANn89iJ=Oecw6OZDwmSYc9HJKQ_G32uN11L+oUcMu+TOD5Xiaw@mail.gmail.com/
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-9-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 10048689def7e40a4405acda16fdc6477d4ecc5c upstream.
when MPTCP server accepts an incoming connection, it clones its listener
socket. However, the pointer to 'inet_opt' for the new socket has the same
value as the original one: as a consequence, on program exit it's possible
to observe the following splat:
BUG: KASAN: double-free in inet_sock_destruct+0x54f/0x8b0
Free of addr ffff888485950880 by task swapper/25/0
CPU: 25 PID: 0 Comm: swapper/25 Kdump: loaded Not tainted 6.8.0-rc1+ #609
Hardware name: Supermicro SYS-6027R-72RF/X9DRH-7TF/7F/iTF/iF, BIOS 3.0 07/26/2013
Call Trace:
<IRQ>
dump_stack_lvl+0x32/0x50
print_report+0xca/0x620
kasan_report_invalid_free+0x64/0x90
__kasan_slab_free+0x1aa/0x1f0
kfree+0xed/0x2e0
inet_sock_destruct+0x54f/0x8b0
__sk_destruct+0x48/0x5b0
rcu_do_batch+0x34e/0xd90
rcu_core+0x559/0xac0
__do_softirq+0x183/0x5a4
irq_exit_rcu+0x12d/0x170
sysvec_apic_timer_interrupt+0x6b/0x80
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x16/0x20
RIP: 0010:cpuidle_enter_state+0x175/0x300
Code: 30 00 0f 84 1f 01 00 00 83 e8 01 83 f8 ff 75 e5 48 83 c4 18 44 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc fb 45 85 ed <0f> 89 60 ff ff ff 48 c1 e5 06 48 c7 43 18 00 00 00 00 48 83 44 2b
RSP: 0018:ffff888481cf7d90 EFLAGS: 00000202
RAX: 0000000000000000 RBX: ffff88887facddc8 RCX: 0000000000000000
RDX: 1ffff1110ff588b1 RSI: 0000000000000019 RDI: ffff88887fac4588
RBP: 0000000000000004 R08: 0000000000000002 R09: 0000000000043080
R10: 0009b02ea273363f R11: ffff88887fabf42b R12: ffffffff932592e0
R13: 0000000000000004 R14: 0000000000000000 R15: 00000022c880ec80
cpuidle_enter+0x4a/0xa0
do_idle+0x310/0x410
cpu_startup_entry+0x51/0x60
start_secondary+0x211/0x270
secondary_startup_64_no_verify+0x184/0x18b
</TASK>
Allocated by task 6853:
kasan_save_stack+0x1c/0x40
kasan_save_track+0x10/0x30
__kasan_kmalloc+0xa6/0xb0
__kmalloc+0x1eb/0x450
cipso_v4_sock_setattr+0x96/0x360
netlbl_sock_setattr+0x132/0x1f0
selinux_netlbl_socket_post_create+0x6c/0x110
selinux_socket_post_create+0x37b/0x7f0
security_socket_post_create+0x63/0xb0
__sock_create+0x305/0x450
__sys_socket_create.part.23+0xbd/0x130
__sys_socket+0x37/0xb0
__x64_sys_socket+0x6f/0xb0
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Freed by task 6858:
kasan_save_stack+0x1c/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x12c/0x1f0
kfree+0xed/0x2e0
inet_sock_destruct+0x54f/0x8b0
__sk_destruct+0x48/0x5b0
subflow_ulp_release+0x1f0/0x250
tcp_cleanup_ulp+0x6e/0x110
tcp_v4_destroy_sock+0x5a/0x3a0
inet_csk_destroy_sock+0x135/0x390
tcp_fin+0x416/0x5c0
tcp_data_queue+0x1bc8/0x4310
tcp_rcv_state_process+0x15a3/0x47b0
tcp_v4_do_rcv+0x2c1/0x990
tcp_v4_rcv+0x41fb/0x5ed0
ip_protocol_deliver_rcu+0x6d/0x9f0
ip_local_deliver_finish+0x278/0x360
ip_local_deliver+0x182/0x2c0
ip_rcv+0xb5/0x1c0
__netif_receive_skb_one_core+0x16e/0x1b0
process_backlog+0x1e3/0x650
__napi_poll+0xa6/0x500
net_rx_action+0x740/0xbb0
__do_softirq+0x183/0x5a4
The buggy address belongs to the object at ffff888485950880
which belongs to the cache kmalloc-64 of size 64
The buggy address is located 0 bytes inside of
64-byte region [ffff888485950880, ffff8884859508c0)
The buggy address belongs to the physical page:
page:0000000056d1e95e refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888485950700 pfn:0x485950
flags: 0x57ffffc0000800(slab|node=1|zone=2|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 0057ffffc0000800 ffff88810004c640 ffffea00121b8ac0 dead000000000006
raw: ffff888485950700 0000000000200019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888485950780: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff888485950800: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff888485950880: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^
ffff888485950900: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff888485950980: 00 00 00 00 00 01 fc fc fc fc fc fc fc fc fc fc
Something similar (a refcount underflow) happens with CALIPSO/IPv6. Fix
this by duplicating IP / IPv6 options after clone, so that
ip{,6}_sock_destruct() doesn't end up freeing the same memory area twice.
Fixes: cf7da0d66cc1 ("mptcp: Create SUBFLOW socket for incoming connections")
Cc: stable@vger.kernel.org
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-8-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b111d8fbd2cbc63e05f3adfbbe0d4df655dfcc5b upstream.
After the blamed commit below, the send buffer auto-tuning can
happen after that the mptcp_propagate_sndbuf() completes - via
the delegated action infrastructure.
We must check for write space even after such change or we risk
missing the wake-up event.
Fixes: 8005184fd1ca ("mptcp: refactor sndbuf auto-tuning")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-6-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit adf1bb78dab55e36d4d557aa2fb446ebcfe9e5ce upstream.
Such value should be inherited from the first subflow, but
passive sockets always used 'rsk_rcv_wnd'.
Fixes: 6f8a612a33e4 ("mptcp: keep track of advertised windows right edge")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-5-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9480f388a2ef54fba911d9325372abd69a328601 upstream.
Commands 'ss -M' are used in script mptcp_join.sh to display only MPTCP
sockets. So it must be checked if ss tool supports MPTCP in this script.
Fixes: e274f7154008 ("selftests: mptcp: add subflow limits test-cases")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-7-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b9cd26f640a308ea314ad23532de9a8592cd09d2 upstream.
when inserting not contiguous data in the subflow write queue,
the protocol creates a new skb and prevent the TCP stack from
merging it later with already queued skbs by setting the EOR marker.
Still no push flag is explicitly set at the end of previous GSO
packet, making the aggregation on the receiver side sub-optimal -
and packetdrill self-tests less predictable.
Explicitly mark the end of not contiguous DSS with the push flag.
Fixes: 6d0060f600ad ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-4-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5b49c41ac8f27aa3a63a1712b1f54f91015c18f2 upstream.
After the 'Fixes' commit mentioned below, the client side might print
the following warning once when a subflow is fully established at the
reception of any valid additional ack:
MPTCP: bogus mpc option on established client sk
That's a normal situation, and no warning should be printed for that. We
can then skip the check when the label is used.
Fixes: e4a0fa47e816 ("mptcp: corner case locking for rx path fields initialization")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-3-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 535d620ea5ff1a033dc64ee3d912acadc7470619 upstream.
Address family of server side mismatches with that of client side, like
in "userspace pm add & remove address" test:
userspace_pm_add_addr $ns1 10.0.2.1 10
userspace_pm_rm_sf $ns1 "::ffff:10.0.2.1" $SUB_ESTABLISHED
That's because on the server side, the family is set to AF_INET6 and the
v4 address is mapped in a v6 one.
This patch fixes this issue. In mptcp_pm_nl_subflow_destroy_doit(), before
checking local address family with remote address family, map an IPv4
address to an IPv6 address if the pair is a v4-mapped address.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387
Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-1-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6890cb1ace350b4386c8aee1343dc3b3ddd214da upstream.
MKTME repurposes the high bit of physical address to key id for encryption
key and, even though MAXPHYADDR in CPUID[0x80000008] remains the same,
the valid bits in the MTRR mask register are based on the reduced number
of physical address bits.
detect_tme() in arch/x86/kernel/cpu/intel.c detects TME and subtracts
it from the total usable physical bits, but it is called too late.
Move the call to early_init_intel() so that it is called in setup_arch(),
before MTRRs are setup.
This fixes boot on TDX-enabled systems, which until now only worked with
"disable_mtrr_cleanup". Without the patch, the values written to the
MTRRs mask registers were 52-bit wide (e.g. 0x000fffff_80000800) and
the writes failed; with the patch, the values are 46-bit wide, which
matches the reduced MAXPHYADDR that is shown in /proc/cpuinfo.
Reported-by: Zixi Chen <zixchen@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240131230902.1867092-3-pbonzini%40redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9a458198eba98b7207669a166e64d04b04cb651b upstream.
In commit fbf6449f84bf ("x86/sev-es: Set x86_virt_bits to the correct
value straight away, instead of a two-phase approach"), the initialization
of c->x86_phys_bits was moved after this_cpu->c_early_init(c). This is
incorrect because early_init_amd() expected to be able to reduce the
value according to the contents of CPUID leaf 0x8000001f.
Fortunately, the bug was negated by init_amd()'s call to early_init_amd(),
which does reduce x86_phys_bits in the end. However, this is very
late in the boot process and, most notably, the wrong value is used for
x86_phys_bits when setting up MTRRs.
To fix this, call get_cpu_address_sizes() as soon as X86_FEATURE_CPUID is
set/cleared, and c->extended_cpuid_level is retrieved.
Fixes: fbf6449f84bf ("x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240131230902.1867092-2-pbonzini%40redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7fd817c906503b6813ea3b41f5fdf4192449a707 upstream.
SETUP_RNG_SEED in setup_data is supplied by kexec and should
not be reserved in the e820 map.
Doing so reserves 16 bytes of RAM when booting with kexec.
(16 bytes because data->len is zeroed by parse_setup_data so only
sizeof(setup_data) is reserved.)
When kexec is used repeatedly, each boot adds two entries in the
kexec-provided e820 map as the 16-byte range splits a larger
range of usable memory. Eventually all of the 128 available entries
get used up. The next split will result in losing usable memory
as the new entries cannot be added to the e820 map.
Fixes: 68b8e9713c8e ("x86/setup: Use rng seeds from setup_data")
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/ZbmOjKnARGiaYBd5@dwarf.suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
