summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-21xtensa: fix boot parameters address translationMax Filippov
commit 40dc948f234b73497c3278875eb08a01d5854d3f upstream. The bootloader may pass physical address of the boot parameters structure to the MMUv3 kernel in the register a2. Code in the _SetupMMU block in the arch/xtensa/kernel/head.S is supposed to map that physical address to the virtual address in the configured virtual memory layout. This code haven't been updated when additional 256+256 and 512+512 memory layouts were introduced and it may produce wrong addresses when used with these layouts. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21xtensa: make sure bFLT stack is 16 byte alignedMax Filippov
commit 0773495b1f5f1c5e23551843f87b5ff37e7af8f7 upstream. Xtensa ABI requires stack alignment to be at least 16. In noMMU configuration ARCH_SLAB_MINALIGN is used to align stack. Make it at least 16. This fixes the following runtime error in noMMU configuration, caused by interaction between insufficiently aligned stack and alloca function, that results in corruption of on-stack variable in the libc function glob: Caught unhandled exception in 'sh' (pid = 47, pc = 0x02d05d65) - should not happen EXCCAUSE is 15 Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21xtensa: add NOTES section to the linker scriptMax Filippov
commit 4119ba211bc4f1bf638f41e50b7a0f329f58aa16 upstream. This section collects all source .note.* sections together in the vmlinux image. Without it .note.Linux section may be placed at address 0, while the rest of the kernel is at its normal address, resulting in a huge vmlinux.bin image that may not be linked into the xtensa Image.elf. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21MIPS: Loongson-3: Fix BRIDGE irq delivery problemHuacai Chen
[ Upstream commit 360fe725f8849aaddc53475fef5d4a0c439b05ae ] After commit e509bd7da149dc349160 ("genirq: Allow migration of chained interrupts by installing default action") Loongson-3 fails at here: setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction); This is because both chained_action and cascade_irqaction don't have IRQF_SHARED flag. This will cause Loongson-3 resume fails because HPET timer interrupt can't be delivered during S3. So we set the irqchip of the chained irq to loongson_irq_chip which doesn't disable the chained irq in CP0.Status. Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20434/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhuacai@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-21MIPS: Loongson-3: Fix CPU UART irq delivery problemHuacai Chen
[ Upstream commit d06f8a2f1befb5a3d0aa660ab1c05e9b744456ea ] Masking/unmasking the CPU UART irq in CP0_Status (and redirecting it to other CPUs) may cause interrupts be lost, especially in multi-package machines (Package-0's UART irq cannot be delivered to others). So make mask_loongson_irq() and unmask_loongson_irq() be no-ops. The original problem (UART IRQ may deliver to any core) is also because of masking/unmasking the CPU UART irq in CP0_Status. So it is safe to remove all of the stuff. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20433/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhuacai@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-21parisc: Fix exported address of os_hpmc handlerHelge Deller
[ Upstream commit 99a3ae51d557d8e38a7aece65678a31f9db215ee ] In the C-code we need to put the physical address of the hpmc handler in the interrupt vector table (IVA) in order to get HPMCs working. Since on parisc64 function pointers are indirect (in fact they are function descriptors) we instead export the address as variable and not as function. This reverts a small part of commit f39cce654f9a ("parisc: Add cfi_startproc and cfi_endproc to assembly code"). Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-21parisc: Fix HPMC handler by increasing size to multiple of 16 bytesHelge Deller
[ Upstream commit d5654e156bc4d68a87bbaa6d7e020baceddf6e68 ] Make sure that the HPMC (High Priority Machine Check) handler is 16-byte aligned and that it's length in the IVT is a multiple of 16 bytes. Otherwise PDC may decide not to call the HPMC crash handler. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-21parisc: Align os_hpmc_size on word boundaryHelge Deller
[ Upstream commit 0ed9d3de5f8f97e6efd5ca0e3377cab5f0451ead ] The os_hpmc_size variable sometimes wasn't aligned at word boundary and thus triggered the unaligned fault handler at startup. Fix it by aligning it properly. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-21bna: ethtool: Avoid reading past end of bufferKees Cook
[ Upstream commit 4dc69c1c1fff2f587f8e737e70b4a4e7565a5c94 ] Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-21e1000: fix race condition between e1000_down() and e1000_watchdogVincenzo Maffione
[ Upstream commit 44c445c3d1b4eacff23141fa7977c3b2ec3a45c9 ] This patch fixes a race condition that can result into the interface being up and carrier on, but with transmits disabled in the hardware. The bug may show up by repeatedly IFF_DOWN+IFF_UP the interface, which allows e1000_watchdog() interleave with e1000_down(). CPU x CPU y -------------------------------------------------------------------- e1000_down(): netif_carrier_off() e1000_watchdog(): if (carrier == off) { netif_carrier_on(); enable_hw_transmit(); } disable_hw_transmit(); e1000_watchdog(): /* carrier on, do nothing */ Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-21e1000: avoid null pointer dereference on invalid stat typeColin Ian King
[ Upstream commit 5983587c8c5ef00d6886477544ad67d495bc5479 ] Currently if the stat type is invalid then data[i] is being set either by dereferencing a null pointer p, or it is reading from an incorrect previous location if we had a valid stat type previously. Fix this by skipping over the read of p on an invalid stat type. Detected by CoverityScan, CID#113385 ("Explicit null dereferenced") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-21mm: do not bug_on on incorrect length in __mm_populate()Michal Hocko
commit bb177a732c4369bb58a1fe1df8f552b6f0f7db5f upstream. syzbot has noticed that a specially crafted library can easily hit VM_BUG_ON in __mm_populate kernel BUG at mm/gup.c:1242! invalid opcode: 0000 [#1] SMP CPU: 2 PID: 9667 Comm: a.out Not tainted 4.18.0-rc3 #644 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 RIP: 0010:__mm_populate+0x1e2/0x1f0 Code: 55 d0 65 48 33 14 25 28 00 00 00 89 d8 75 21 48 83 c4 20 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 75 18 f1 ff 0f 0b e8 6e 18 f1 ff <0f> 0b 31 db eb c9 e8 93 06 e0 ff 0f 1f 00 55 48 89 e5 53 48 89 fb Call Trace: vm_brk_flags+0xc3/0x100 vm_brk+0x1f/0x30 load_elf_library+0x281/0x2e0 __ia32_sys_uselib+0x170/0x1e0 do_fast_syscall_32+0xca/0x420 entry_SYSENTER_compat+0x70/0x7f The reason is that the length of the new brk is not page aligned when we try to populate the it. There is no reason to bug on that though. do_brk_flags already aligns the length properly so the mapping is expanded as it should. All we need is to tell mm_populate about it. Besides that there is absolutely no reason to to bug_on in the first place. The worst thing that could happen is that the last page wouldn't get populated and that is far from putting system into an inconsistent state. Fix the issue by moving the length sanitization code from do_brk_flags up to vm_brk_flags. The only other caller of do_brk_flags is brk syscall entry and it makes sure to provide the proper length so t here is no need for sanitation and so we can use do_brk_flags without it. Also remove the bogus BUG_ONs. [osalvador@techadventures.net: fix up vm_brk_flags s@request@len@] Link: http://lkml.kernel.org/r/20180706090217.GI32658@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: syzbot <syzbot+5dcb560fe12aa5091c06@syzkaller.appspotmail.com> Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 4.9: - There is no do_brk_flags() function; update do_brk() - Adjust context] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-21fuse: set FR_SENT while lockedMiklos Szeredi
commit 4c316f2f3ff315cb48efb7435621e5bfb81df96d upstream. Otherwise fuse_dev_do_write() could come in and finish off the request, and the set_bit(FR_SENT, ...) could trigger the WARN_ON(test_bit(FR_SENT, ...)) in request_end(). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Reported-by: syzbot+ef054c4d3f64cd7f7cec@syzkaller.appspotmai Fixes: 46c34a348b0a ("fuse: no fc->lock for pqueue parts") Cc: <stable@vger.kernel.org> # v4.2 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21fuse: fix blocked_waitq wakeupMiklos Szeredi
commit 908a572b80f6e9577b45e81b3dfe2e22111286b8 upstream. Using waitqueue_active() is racy. Make sure we issue a wake_up() unconditionally after storing into fc->blocked. After that it's okay to optimize with waitqueue_active() since the first wake up provides the necessary barrier for all waiters, not the just the woken one. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 3c18ef8117f0 ("fuse: optimize wake_up") Cc: <stable@vger.kernel.org> # v3.10 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21fuse: Fix use-after-free in fuse_dev_do_write()Kirill Tkhai
commit d2d2d4fb1f54eff0f3faa9762d84f6446a4bc5d0 upstream. After we found req in request_find() and released the lock, everything may happen with the req in parallel: cpu0 cpu1 fuse_dev_do_write() fuse_dev_do_write() req = request_find(fpq, ...) ... spin_unlock(&fpq->lock) ... ... req = request_find(fpq, oh.unique) ... spin_unlock(&fpq->lock) queue_interrupt(&fc->iq, req); ... ... ... ... ... request_end(fc, req); fuse_put_request(fc, req); ... queue_interrupt(&fc->iq, req); Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 46c34a348b0a ("fuse: no fc->lock for pqueue parts") Cc: <stable@vger.kernel.org> # v4.2 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21fuse: Fix use-after-free in fuse_dev_do_read()Kirill Tkhai
commit bc78abbd55dd28e2287ec6d6502b842321a17c87 upstream. We may pick freed req in this way: [cpu0] [cpu1] fuse_dev_do_read() fuse_dev_do_write() list_move_tail(&req->list, ...); ... spin_unlock(&fpq->lock); ... ... request_end(fc, req); ... fuse_put_request(fc, req); if (test_bit(FR_INTERRUPTED, ...)) queue_interrupt(fiq, req); Fix that by keeping req alive until we finish all manipulations. Reported-by: syzbot+4e975615ca01f2277bdd@syzkaller.appspotmail.com Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 46c34a348b0a ("fuse: no fc->lock for pqueue parts") Cc: <stable@vger.kernel.org> # v4.2 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21scsi: qla2xxx: shutdown chip if reset failQuinn Tran
commit 1e4ac5d6fe0a4af17e4b6251b884485832bf75a3 upstream. If chip unable to fully initialize, use full shutdown sequence to clear out any stale FW state. Fixes: e315cd28b9ef ("[SCSI] qla2xxx: Code changes for qla data structure refactoring") Cc: stable@vger.kernel.org #4.10 Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21scsi: qla2xxx: Fix incorrect port speed being set for FC adaptersHimanshu Madhani
commit 4c1458df9635c7e3ced155f594d2e7dfd7254e21 upstream. Fixes: 6246b8a1d26c7c ("[SCSI] qla2xxx: Enhancements to support ISP83xx.") Fixes: 1bb395485160d2 ("qla2xxx: Correct iiDMA-update calling conventions.") Cc: <stable@vger.kernel.org> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21cdrom: fix improper type cast, which can leat to information leak.Young_X
commit e4f3aa2e1e67bb48dfbaaf1cad59013d5a5bc276 upstream. There is another cast from unsigned long to int which causes a bounds check to fail with specially crafted input. The value is then used as an index in the slot array in cdrom_slot_status(). This issue is similar to CVE-2018-16658 and CVE-2018-10940. Signed-off-by: Young_X <YangX92@hotmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-219p: clear dangling pointers in p9stat_freeDominique Martinet
[ Upstream commit 62e3941776fea8678bb8120607039410b1b61a65 ] p9stat_free is more of a cleanup function than a 'free' function as it only frees the content of the struct; there are chances of use-after-free if it is improperly used (e.g. p9stat_free called twice as it used to be possible to) Clearing dangling pointers makes the function idempotent and safer to use. Link: http://lkml.kernel.org/r/1535410108-20650-2-git-send-email-asmadeus@codewreck.org Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr> Reported-by: syzbot+d4252148d198410b864f@syzkaller.appspotmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-219p locks: fix glock.client_id leak in do_lockDominique Martinet
[ Upstream commit b4dc44b3cac9e8327e0655f530ed0c46f2e6214c ] the 9p client code overwrites our glock.client_id pointing to a static buffer by an allocated string holding the network provided value which we do not care about; free and reset the value as appropriate. This is almost identical to the leak in v9fs_file_getlock() fixed by Al Viro in commit ce85dd58ad5a6 ("9p: we are leaking glock.client_id in v9fs_file_getlock()"), which was returned as an error by a coverity false positive -- while we are here attempt to make the code slightly more robust to future change of the net/9p/client code and hopefully more clear to coverity that there is no problem. Link: http://lkml.kernel.org/r/1536339057-21974-5-git-send-email-asmadeus@codewreck.org Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21powerpc/selftests: Wait all threads to joinBreno Leitao
[ Upstream commit 693b31b2fc1636f0aa7af53136d3b49f6ad9ff39 ] Test tm-tmspr might exit before all threads stop executing, because it just waits for the very last thread to join before proceeding/exiting. This patch makes sure that all threads that were created will join before proceeding/exiting. This patch also guarantees that the amount of threads being created is equal to thread_num. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21media: tvp5150: fix width alignment during set_selection()Marco Felsch
[ Upstream commit bd24db04101f45a9c1d874fe21b0c7eab7bcadec ] The driver ignored the width alignment which exists due to the UYVY colorspace format. Fix the width alignment and make use of the the provided v4l2 helper function to set the width, height and all alignments in one. Fixes: 963ddc63e20d ("[media] media: tvp5150: Add cropping support") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21sc16is7xx: Fix for multi-channel stallPhil Elwell
[ Upstream commit 8344498721059754e09d30fe255a12dab8fb03ef ] The SC16IS752 is a dual-channel device. The two channels are largely independent, but the IRQ signals are wired together as an open-drain, active low signal which will be driven low while either of the channels requires attention, which can be for significant periods of time until operations complete and the interrupt can be acknowledged. In that respect it is should be treated as a true level-sensitive IRQ. The kernel, however, needs to be able to exit interrupt context in order to use I2C or SPI to access the device registers (which may involve sleeping). Therefore the interrupt needs to be masked out or paused in some way. The usual way to manage sleeping from within an interrupt handler is to use a threaded interrupt handler - a regular interrupt routine does the minimum amount of work needed to triage the interrupt before waking the interrupt service thread. If the threaded IRQ is marked as IRQF_ONESHOT the kernel will automatically mask out the interrupt until the thread runs to completion. The sc16is7xx driver used to use a threaded IRQ, but a patch switched to using a kthread_worker in order to set realtime priorities on the handler thread and for other optimisations. The end result is non-threaded IRQ that schedules some work then returns IRQ_HANDLED, making the kernel think that all IRQ processing has completed. The work-around to prevent a constant stream of interrupts is to mark the interrupt as edge-sensitive rather than level-sensitive, but interpreting an active-low source as a falling-edge source requires care to prevent a total cessation of interrupts. Whereas an edge-triggering source will generate a new edge for every interrupt condition a level-triggering source will keep the signal at the interrupting level until it no longer requires attention; in other words, the host won't see another edge until all interrupt conditions are cleared. It is therefore vital that the interrupt handler does not exit with an outstanding interrupt condition, otherwise the kernel will not receive another interrupt unless some other operation causes the interrupt state on the device to be cleared. The existing sc16is7xx driver has a very simple interrupt "thread" (kthread_work job) that processes interrupts on each channel in turn until there are no more. If both channels are active and the first channel starts interrupting while the handler for the second channel is running then it will not be detected and an IRQ stall ensues. This could be handled easily if there was a shared IRQ status register, or a convenient way to determine if the IRQ had been deasserted for any length of time, but both appear to be lacking. Avoid this problem (or at least make it much less likely to happen) by reducing the granularity of per-channel interrupt processing to one condition per iteration, only exiting the overall loop when both channels are no longer interrupting. Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21MIPS/PCI: Call pcie_bus_configure_settings() to set MPS/MRRSHuacai Chen
[ Upstream commit 2794f688b2c336e0da85e9f91fed33febbd9f54a ] Call pcie_bus_configure_settings() on MIPS, like for other platforms. The function pcie_bus_configure_settings() makes sure the MPS (Max Payload Size) across the bus is uniform and provides the ability to tune the MRSS (Max Read Request Size) and MPS (Max Payload Size) to higher performance values. Some devices will not operate properly if these aren't set correctly because the firmware doesn't always do it. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20649/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhuacai@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21powerpc/boot: Ensure _zimage_start is a weak symbolJoel Stanley
[ Upstream commit ee9d21b3b3583712029a0db65a4b7c081d08d3b3 ] When building with clang crt0's _zimage_start is not marked weak, which breaks the build when linking the kernel image: $ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$ 0000000000000058 g .text 0000000000000000 _zimage_start ld: arch/powerpc/boot/wrapper.a(crt0.o): in function '_zimage_start': (.text+0x58): multiple definition of '_zimage_start'; arch/powerpc/boot/pseries-head.o:(.text+0x0): first defined here Clang requires the .weak directive to appear after the symbol is declared. The binutils manual says: This directive sets the weak attribute on the comma separated list of symbol names. If the symbols do not already exist, they will be created. So it appears this is different with clang. The only reference I could see for this was an OpenBSD mailing list post[1]. Changing it to be after the declaration fixes building with Clang, and still works with GCC. $ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$ 0000000000000058 w .text 0000000000000000 _zimage_start Reported to clang as https://bugs.llvm.org/show_bug.cgi?id=38921 [1] https://groups.google.com/forum/#!topic/fa.openbsd.tech/PAgKKen2YCY Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21MIPS: kexec: Mark CPU offline before disabling local IRQDengcheng Zhu
[ Upstream commit dc57aaf95a516f70e2d527d8287a0332c481a226 ] After changing CPU online status, it will not be sent any IPIs such as in __flush_cache_all() on software coherency systems. Do this before disabling local IRQ. Signed-off-by: Dengcheng Zhu <dzhu@wavecomp.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20571/ Cc: pburton@wavecomp.com Cc: ralf@linux-mips.org Cc: linux-mips@linux-mips.org Cc: rachel.mozes@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21media: pci: cx23885: handle adding to list failureNicholas Mc Guire
[ Upstream commit c5d59528e24ad22500347b199d52b9368e686a42 ] altera_hw_filt_init() which calls append_internal() assumes that the node was successfully linked in while in fact it can silently fail. So the call-site needs to set return to -ENOMEM on append_internal() returning NULL and exit through the err path. Fixes: 349bcf02e361 ("[media] Altera FPGA based CI driver module") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21drm/omap: fix memory barrier bug in DMM driverTomi Valkeinen
[ Upstream commit 538f66ba204944470a653a4cccc5f8befdf97c22 ] A DMM timeout "timed out waiting for done" has been observed on DRA7 devices. The timeout happens rarely, and only when the system is under heavy load. Debugging showed that the timeout can be made to happen much more frequently by optimizing the DMM driver, so that there's almost no code between writing the last DMM descriptors to RAM, and writing to DMM register which starts the DMM transaction. The current theory is that a wmb() does not properly ensure that the data written to RAM is observable by all the components in the system. This DMM timeout has caused interesting (and rare) bugs as the error handling was not functioning properly (the error handling has been fixed in previous commits): * If a DMM timeout happened when a GEM buffer was being pinned for display on the screen, a timeout error would be shown, but the driver would continue programming DSS HW with broken buffer, leading to SYNCLOST floods and possible crashes. * If a DMM timeout happened when other user (say, video decoder) was pinning a GEM buffer, a timeout would be shown but if the user handled the error properly, no other issues followed. * If a DMM timeout happened when a GEM buffer was being released, the driver does not even notice the error, leading to crashes or hang later. This patch adds wmb() and readl() calls after the last bit is written to RAM, which should ensure that the execution proceeds only after the data is actually in RAM, and thus observable by DMM. The read-back should not be needed. Further study is required to understand if DMM is somehow special case and read-back is ok, or if DRA7's memory barriers do not work correctly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21powerpc/nohash: fix undefined behaviour when testing page size supportDaniel Axtens
[ Upstream commit f5e284803a7206d43e26f9ffcae5de9626d95e37 ] When enumerating page size definitions to check hardware support, we construct a constant which is (1U << (def->shift - 10)). However, the array of page size definitions is only initalised for various MMU_PAGE_* constants, so it contains a number of 0-initialised elements with def->shift == 0. This means we end up shifting by a very large number, which gives the following UBSan splat: ================================================================================ UBSAN: Undefined behaviour in /home/dja/dev/linux/linux/arch/powerpc/mm/tlb_nohash.c:506:21 shift exponent 4294967286 is too large for 32-bit type 'unsigned int' CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc3-00045-ga604f927b012-dirty #6 Call Trace: [c00000000101bc20] [c000000000a13d54] .dump_stack+0xa8/0xec (unreliable) [c00000000101bcb0] [c0000000004f20a8] .ubsan_epilogue+0x18/0x64 [c00000000101bd30] [c0000000004f2b10] .__ubsan_handle_shift_out_of_bounds+0x110/0x1a4 [c00000000101be20] [c000000000d21760] .early_init_mmu+0x1b4/0x5a0 [c00000000101bf10] [c000000000d1ba28] .early_setup+0x100/0x130 [c00000000101bf90] [c000000000000528] start_here_multiplatform+0x68/0x80 ================================================================================ Fix this by first checking if the element exists (shift != 0) before constructing the constant. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21ARM: imx_v6_v7_defconfig: Select CONFIG_TMPFS_POSIX_ACLFabio Estevam
[ Upstream commit 35d3cbe84544da74e39e1cec01374092467e3119 ] Andreas Müller reports: "Fixes: | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[220]: Failed to apply ACL on /dev/v4l-subdev0: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[224]: Failed to apply ACL on /dev/v4l-subdev1: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[215]: Failed to apply ACL on /dev/v4l-subdev10: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[228]: Failed to apply ACL on /dev/v4l-subdev2: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[232]: Failed to apply ACL on /dev/v4l-subdev5: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[217]: Failed to apply ACL on /dev/v4l-subdev11: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[214]: Failed to apply ACL on /dev/dri/card1: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[216]: Failed to apply ACL on /dev/v4l-subdev8: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[226]: Failed to apply ACL on /dev/v4l-subdev9: Operation not supported and nasty follow-ups: Starting weston from sddm as unpriviledged user fails with some hints on missing access rights." Select the CONFIG_TMPFS_POSIX_ACL option to fix these issues. Reported-by: Andreas Müller <schnitzeltony@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21tty: check name length in tty_find_polling_driver()Miles Chen
[ Upstream commit 33a1a7be198657c8ca26ad406c4d2a89b7162bcc ] The issue is found by a fuzzing test. If tty_find_polling_driver() recevies an incorrect input such as ',,' or '0b', the len becomes 0 and strncmp() always return 0. In this case, a null p->ops->poll_init() is called and it causes a kernel panic. Fix this by checking name length against zero in tty_find_polling_driver(). $echo ,, > /sys/module/kgdboc/parameters/kgdboc [ 20.804451] WARNING: CPU: 1 PID: 104 at drivers/tty/serial/serial_core.c:457 uart_get_baud_rate+0xe8/0x190 [ 20.804917] Modules linked in: [ 20.805317] CPU: 1 PID: 104 Comm: sh Not tainted 4.19.0-rc7ajb #8 [ 20.805469] Hardware name: linux,dummy-virt (DT) [ 20.805732] pstate: 20000005 (nzCv daif -PAN -UAO) [ 20.805895] pc : uart_get_baud_rate+0xe8/0x190 [ 20.806042] lr : uart_get_baud_rate+0xc0/0x190 [ 20.806476] sp : ffffffc06acff940 [ 20.806676] x29: ffffffc06acff940 x28: 0000000000002580 [ 20.806977] x27: 0000000000009600 x26: 0000000000009600 [ 20.807231] x25: ffffffc06acffad0 x24: 00000000ffffeff0 [ 20.807576] x23: 0000000000000001 x22: 0000000000000000 [ 20.807807] x21: 0000000000000001 x20: 0000000000000000 [ 20.808049] x19: ffffffc06acffac8 x18: 0000000000000000 [ 20.808277] x17: 0000000000000000 x16: 0000000000000000 [ 20.808520] x15: ffffffffffffffff x14: ffffffff00000000 [ 20.808757] x13: ffffffffffffffff x12: 0000000000000001 [ 20.809011] x11: 0101010101010101 x10: ffffff880d59ff5f [ 20.809292] x9 : ffffff880d59ff5e x8 : ffffffc06acffaf3 [ 20.809549] x7 : 0000000000000000 x6 : ffffff880d59ff5f [ 20.809803] x5 : 0000000080008001 x4 : 0000000000000003 [ 20.810056] x3 : ffffff900853e6b4 x2 : dfffff9000000000 [ 20.810693] x1 : ffffffc06acffad0 x0 : 0000000000000cb0 [ 20.811005] Call trace: [ 20.811214] uart_get_baud_rate+0xe8/0x190 [ 20.811479] serial8250_do_set_termios+0xe0/0x6f4 [ 20.811719] serial8250_set_termios+0x48/0x54 [ 20.811928] uart_set_options+0x138/0x1bc [ 20.812129] uart_poll_init+0x114/0x16c [ 20.812330] tty_find_polling_driver+0x158/0x200 [ 20.812545] configure_kgdboc+0xbc/0x1bc [ 20.812745] param_set_kgdboc_var+0xb8/0x150 [ 20.812960] param_attr_store+0xbc/0x150 [ 20.813160] module_attr_store+0x40/0x58 [ 20.813364] sysfs_kf_write+0x8c/0xa8 [ 20.813563] kernfs_fop_write+0x154/0x290 [ 20.813764] vfs_write+0xf0/0x278 [ 20.813951] __arm64_sys_write+0x84/0xf4 [ 20.814400] el0_svc_common+0xf4/0x1dc [ 20.814616] el0_svc_handler+0x98/0xbc [ 20.814804] el0_svc+0x8/0xc [ 20.822005] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 20.826913] Mem abort info: [ 20.827103] ESR = 0x84000006 [ 20.827352] Exception class = IABT (current EL), IL = 16 bits [ 20.827655] SET = 0, FnV = 0 [ 20.827855] EA = 0, S1PTW = 0 [ 20.828135] user pgtable: 4k pages, 39-bit VAs, pgdp = (____ptrval____) [ 20.828484] [0000000000000000] pgd=00000000aadee003, pud=00000000aadee003, pmd=0000000000000000 [ 20.829195] Internal error: Oops: 84000006 [#1] SMP [ 20.829564] Modules linked in: [ 20.829890] CPU: 1 PID: 104 Comm: sh Tainted: G W 4.19.0-rc7ajb #8 [ 20.830545] Hardware name: linux,dummy-virt (DT) [ 20.830829] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 20.831174] pc : (null) [ 20.831457] lr : serial8250_do_set_termios+0x358/0x6f4 [ 20.831727] sp : ffffffc06acff9b0 [ 20.831936] x29: ffffffc06acff9b0 x28: ffffff9008d7c000 [ 20.832267] x27: ffffff900969e16f x26: 0000000000000000 [ 20.832589] x25: ffffff900969dfb0 x24: 0000000000000000 [ 20.832906] x23: ffffffc06acffad0 x22: ffffff900969e160 [ 20.833232] x21: 0000000000000000 x20: ffffffc06acffac8 [ 20.833559] x19: ffffff900969df90 x18: 0000000000000000 [ 20.833878] x17: 0000000000000000 x16: 0000000000000000 [ 20.834491] x15: ffffffffffffffff x14: ffffffff00000000 [ 20.834821] x13: ffffffffffffffff x12: 0000000000000001 [ 20.835143] x11: 0101010101010101 x10: ffffff880d59ff5f [ 20.835467] x9 : ffffff880d59ff5e x8 : ffffffc06acffaf3 [ 20.835790] x7 : 0000000000000000 x6 : ffffff880d59ff5f [ 20.836111] x5 : c06419717c314100 x4 : 0000000000000007 [ 20.836419] x3 : 0000000000000000 x2 : 0000000000000000 [ 20.836732] x1 : 0000000000000001 x0 : ffffff900969df90 [ 20.837100] Process sh (pid: 104, stack limit = 0x(____ptrval____)) [ 20.837396] Call trace: [ 20.837566] (null) [ 20.837816] serial8250_set_termios+0x48/0x54 [ 20.838089] uart_set_options+0x138/0x1bc [ 20.838570] uart_poll_init+0x114/0x16c [ 20.838834] tty_find_polling_driver+0x158/0x200 [ 20.839119] configure_kgdboc+0xbc/0x1bc [ 20.839380] param_set_kgdboc_var+0xb8/0x150 [ 20.839658] param_attr_store+0xbc/0x150 [ 20.839920] module_attr_store+0x40/0x58 [ 20.840183] sysfs_kf_write+0x8c/0xa8 [ 20.840183] sysfs_kf_write+0x8c/0xa8 [ 20.840440] kernfs_fop_write+0x154/0x290 [ 20.840702] vfs_write+0xf0/0x278 [ 20.840942] __arm64_sys_write+0x84/0xf4 [ 20.841209] el0_svc_common+0xf4/0x1dc [ 20.841471] el0_svc_handler+0x98/0xbc [ 20.841713] el0_svc+0x8/0xc [ 20.842057] Code: bad PC value [ 20.842764] ---[ end trace a8835d7de79aaadf ]--- [ 20.843134] Kernel panic - not syncing: Fatal exception [ 20.843515] SMP: stopping secondary CPUs [ 20.844289] Kernel Offset: disabled [ 20.844634] CPU features: 0x0,21806002 [ 20.844857] Memory Limit: none [ 20.845172] ---[ end Kernel panic - not syncing: Fatal exception ]--- Signed-off-by: Miles Chen <miles.chen@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21powerpc/eeh: Fix possible null deref in eeh_dump_dev_log()Sam Bobroff
[ Upstream commit f9bc28aedfb5bbd572d2d365f3095c1becd7209b ] If an error occurs during an unplug operation, it's possible for eeh_dump_dev_log() to be called when edev->pdn is null, which currently leads to dereferencing a null pointer. Handle this by skipping the error log for those devices. Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13Linux 4.9.137v4.9.137Greg Kroah-Hartman
2018-11-13MD: fix invalid stored role for a disk - try2Shaohua Li
commit 9e753ba9b9b405e3902d9f08aec5f2ea58a0c317 upstream. Commit d595567dc4f0 (MD: fix invalid stored role for a disk) broke linear hotadd. Let's only fix the role for disks in raid1/10. Based on Guoqing's original patch. Reported-by: kernel test robot <rong.a.chen@intel.com> Cc: Gioh Kim <gi-oh.kim@profitbricks.com> Cc: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13btrfs: set max_extent_size properlyJosef Bacik
commit ad22cf6ea47fa20fbe11ac324a0a15c0a9a4a2a9 upstream. We can't use entry->bytes if our entry is a bitmap entry, we need to use entry->max_extent_size in that case. Fix up all the logic to make this consistent. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13Btrfs: fix null pointer dereference on compressed write path errorFilipe Manana
commit 3527a018c00e5dbada2f9d7ed5576437b6dd5cfb upstream. At inode.c:compress_file_range(), under the "free_pages_out" label, we can end up dereferencing the "pages" pointer when it has a NULL value. This case happens when "start" has a value of 0 and we fail to allocate memory for the "pages" pointer. When that happens we jump to the "cont" label and then enter the "if (start == 0)" branch where we immediately call the cow_file_range_inline() function. If that function returns 0 (success creating an inline extent) or an error (like -ENOMEM for example) we jump to the "free_pages_out" label and then access "pages[i]" leading to a NULL pointer dereference, since "nr_pages" has a value greater than zero at that point. Fix this by setting "nr_pages" to 0 when we fail to allocate memory for the "pages" pointer. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201119 Fixes: 771ed689d2cd ("Btrfs: Optimize compressed writeback and reads") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13btrfs: qgroup: Dirty all qgroups before rescanQu Wenruo
commit 9c7b0c2e8dbfbcd80a71e2cbfe02704f26c185c6 upstream. [BUG] In the following case, rescan won't zero out the number of qgroup 1/0: $ mkfs.btrfs -fq $DEV $ mount $DEV /mnt $ btrfs quota enable /mnt $ btrfs qgroup create 1/0 /mnt $ btrfs sub create /mnt/sub $ btrfs qgroup assign 0/257 1/0 /mnt $ dd if=/dev/urandom of=/mnt/sub/file bs=1k count=1000 $ btrfs sub snap /mnt/sub /mnt/snap $ btrfs quota rescan -w /mnt $ btrfs qgroup show -pcre /mnt qgroupid rfer excl max_rfer max_excl parent child -------- ---- ---- -------- -------- ------ ----- 0/5 16.00KiB 16.00KiB none none --- --- 0/257 1016.00KiB 16.00KiB none none 1/0 --- 0/258 1016.00KiB 16.00KiB none none --- --- 1/0 1016.00KiB 16.00KiB none none --- 0/257 So far so good, but: $ btrfs qgroup remove 0/257 1/0 /mnt WARNING: quotas may be inconsistent, rescan needed $ btrfs quota rescan -w /mnt $ btrfs qgroup show -pcre /mnt qgoupid rfer excl max_rfer max_excl parent child -------- ---- ---- -------- -------- ------ ----- 0/5 16.00KiB 16.00KiB none none --- --- 0/257 1016.00KiB 16.00KiB none none --- --- 0/258 1016.00KiB 16.00KiB none none --- --- 1/0 1016.00KiB 16.00KiB none none --- --- ^^^^^^^^^^ ^^^^^^^^ not cleared [CAUSE] Before rescan we call qgroup_rescan_zero_tracking() to zero out all qgroups' accounting numbers. However we don't mark all qgroups dirty, but rely on rescan to do so. If we have any high level qgroup without children, it won't be marked dirty during rescan, since we cannot reach that qgroup. This will cause QGROUP_INFO items of childless qgroups never get updated in the quota tree, thus their numbers will stay the same in "btrfs qgroup show" output. [FIX] Just mark all qgroups dirty in qgroup_rescan_zero_tracking(), so even if we have childless qgroups, their QGROUP_INFO items will still get updated during rescan. Reported-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Tested-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13Btrfs: fix wrong dentries after fsync of file that got its parent replacedFilipe Manana
commit 0f375eed92b5a407657532637ed9652611a682f5 upstream. In a scenario like the following: mkdir /mnt/A # inode 258 mkdir /mnt/B # inode 259 touch /mnt/B/bar # inode 260 sync mv /mnt/B/bar /mnt/A/bar mv -T /mnt/A /mnt/B fsync /mnt/B/bar <power fail> After replaying the log we end up with file bar having 2 hard links, both with the name 'bar' and one in the directory with inode number 258 and the other in the directory with inode number 259. Also, we end up with the directory inode 259 still existing and with the directory inode 258 still named as 'A', instead of 'B'. In this scenario, file 'bar' should only have one hard link, located at directory inode 258, the directory inode 259 should not exist anymore and the name for directory inode 258 should be 'B'. This incorrect behaviour happens because when attempting to log the old parents of an inode, we skip any parents that no longer exist. Fix this by forcing a full commit if an old parent no longer exists. A test case for fstests follows soon. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13btrfs: make sure we create all new block groupsJosef Bacik
commit 545e3366db823dc3342ca9d7fea803f829c9062f upstream. Allocating new chunks modifies both the extent and chunk tree, which can trigger new chunk allocations. So instead of doing list_for_each_safe, just do while (!list_empty()) so we make sure we don't exit with other pending bg's still on our list. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13btrfs: reset max_extent_size on clear in a bitmapJosef Bacik
commit 553cceb49681d60975d00892877d4c871bf220f9 upstream. We need to clear the max_extent_size when we clear bits from a bitmap since it could have been from the range that contains the max_extent_size. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13btrfs: wait on caching when putting the bg cacheJosef Bacik
commit 3aa7c7a31c26321696b92841d5103461c6f3f517 upstream. While testing my backport I noticed there was a panic if I ran generic/416 generic/417 generic/418 all in a row. This just happened to uncover a race where we had outstanding IO after we destroy all of our workqueues, and then we'd go to queue the endio work on those free'd workqueues. This is because we aren't waiting for the caching threads to be done before freeing everything up, so to fix this make sure we wait on any outstanding caching that's being done before we free up the block group, so we're sure to be done with all IO by the time we get to btrfs_stop_all_workers(). This fixes the panic I was seeing consistently in testing. ------------[ cut here ]------------ kernel BUG at fs/btrfs/volumes.c:6112! SMP PTI Modules linked in: CPU: 1 PID: 27165 Comm: kworker/u4:7 Not tainted 4.16.0-02155-g3553e54a578d-dirty #875 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Workqueue: btrfs-cache btrfs_cache_helper RIP: 0010:btrfs_map_bio+0x346/0x370 RSP: 0000:ffffc900061e79d0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff880071542e00 RCX: 0000000000533000 RDX: ffff88006bb74380 RSI: 0000000000000008 RDI: ffff880078160000 RBP: 0000000000000001 R08: ffff8800781cd200 R09: 0000000000503000 R10: ffff88006cd21200 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8800781cd200 R15: ffff880071542e00 FS: 0000000000000000(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000817ffc4 CR3: 0000000078314000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: btree_submit_bio_hook+0x8a/0xd0 submit_one_bio+0x5d/0x80 read_extent_buffer_pages+0x18a/0x320 btree_read_extent_buffer_pages+0xbc/0x200 ? alloc_extent_buffer+0x359/0x3e0 read_tree_block+0x3d/0x60 read_block_for_search.isra.30+0x1a5/0x360 btrfs_search_slot+0x41b/0xa10 btrfs_next_old_leaf+0x212/0x470 caching_thread+0x323/0x490 normal_work_helper+0xc5/0x310 process_one_work+0x141/0x340 worker_thread+0x44/0x3c0 kthread+0xf8/0x130 ? process_one_work+0x340/0x340 ? kthread_bind+0x10/0x10 ret_from_fork+0x35/0x40 RIP: btrfs_map_bio+0x346/0x370 RSP: ffffc900061e79d0 ---[ end trace 827eb13e50846033 ]--- Kernel panic - not syncing: Fatal exception Kernel Offset: disabled ---[ end Kernel panic - not syncing: Fatal exception CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13btrfs: don't attempt to trim devices that don't support itJeff Mahoney
commit 0be88e367fd8fbdb45257615d691f4675dda062f upstream. We check whether any device the file system is using supports discard in the ioctl call, but then we attempt to trim free extents on every device regardless of whether discard is supported. Due to the way we mask off EOPNOTSUPP, we can end up issuing the trim operations on each free range on devices that don't support it, just wasting time. Fixes: 499f377f49f08 ("btrfs: iterate over unused chunk space in FITRIM") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13btrfs: iterate all devices during trim, instead of fs_devices::alloc_listJeff Mahoney
commit d4e329de5e5e21594df2e0dd59da9acee71f133b upstream. btrfs_trim_fs iterates over the fs_devices->alloc_list while holding the device_list_mutex. The problem is that ->alloc_list is protected by the chunk mutex. We don't want to hold the chunk mutex over the trim of the entire file system. Fortunately, the ->dev_list list is protected by the dev_list mutex and while it will give us all devices, including read-only devices, we already just skip the read-only devices. Then we can continue to take and release the chunk mutex while scanning each device. Fixes: 499f377f49f ("btrfs: iterate over unused chunk space in FITRIM") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13btrfs: fix error handling in free_log_treeJeff Mahoney
commit 374b0e2d6ba5da7fd1cadb3247731ff27d011f6f upstream. When we hit an I/O error in free_log_tree->walk_log_tree during file system shutdown we can crash due to there not being a valid transaction handle. Use btrfs_handle_fs_error when there's no transaction handle to use. BUG: unable to handle kernel NULL pointer dereference at 0000000000000060 IP: free_log_tree+0xd2/0x140 [btrfs] PGD 0 P4D 0 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI Modules linked in: <modules> CPU: 2 PID: 23544 Comm: umount Tainted: G W 4.12.14-kvmsmall #9 SLE15 (unreleased) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 task: ffff96bfd3478880 task.stack: ffffa7cf40d78000 RIP: 0010:free_log_tree+0xd2/0x140 [btrfs] RSP: 0018:ffffa7cf40d7bd10 EFLAGS: 00010282 RAX: 00000000fffffffb RBX: 00000000fffffffb RCX: 0000000000000002 RDX: 0000000000000000 RSI: ffff96c02f07d4c8 RDI: 0000000000000282 RBP: ffff96c013cf1000 R08: ffff96c02f07d4c8 R09: ffff96c02f07d4d0 R10: 0000000000000000 R11: 0000000000000002 R12: 0000000000000000 R13: ffff96c005e800c0 R14: ffffa7cf40d7bdb8 R15: 0000000000000000 FS: 00007f17856bcfc0(0000) GS:ffff96c03f600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000060 CR3: 0000000045ed6002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? wait_for_writer+0xb0/0xb0 [btrfs] btrfs_free_log+0x17/0x30 [btrfs] btrfs_drop_and_free_fs_root+0x9a/0xe0 [btrfs] btrfs_free_fs_roots+0xc0/0x130 [btrfs] ? wait_for_completion+0xf2/0x100 close_ctree+0xea/0x2e0 [btrfs] ? kthread_stop+0x161/0x260 generic_shutdown_super+0x6c/0x120 kill_anon_super+0xe/0x20 btrfs_kill_super+0x13/0x100 [btrfs] deactivate_locked_super+0x3f/0x70 cleanup_mnt+0x3b/0x70 task_work_run+0x78/0x90 exit_to_usermode_loop+0x77/0xa6 do_syscall_64+0x1c5/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7f1784f90827 RSP: 002b:00007ffdeeb03118 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 0000556a60c62970 RCX: 00007f1784f90827 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000556a60c62b50 RBP: 0000000000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000556a60c63900 R11: 0000000000000246 R12: 0000556a60c62b50 R13: 00007f17854a81c4 R14: 0000000000000000 R15: 0000000000000000 RIP: free_log_tree+0xd2/0x140 [btrfs] RSP: ffffa7cf40d7bd10 CR2: 0000000000000060 Fixes: 681ae50917df9 ("Btrfs: cleanup reserved space when freeing tree log on error") CC: <stable@vger.kernel.org> # v3.13 Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13btrfs: locking: Add extra check in btrfs_init_new_buffer() to avoid deadlockQu Wenruo
commit b72c3aba09a53fc7c1824250d71180ca154517a7 upstream. [BUG] For certain crafted image, whose csum root leaf has missing backref, if we try to trigger write with data csum, it could cause deadlock with the following kernel WARN_ON(): WARNING: CPU: 1 PID: 41 at fs/btrfs/locking.c:230 btrfs_tree_lock+0x3e2/0x400 CPU: 1 PID: 41 Comm: kworker/u4:1 Not tainted 4.18.0-rc1+ #8 Workqueue: btrfs-endio-write btrfs_endio_write_helper RIP: 0010:btrfs_tree_lock+0x3e2/0x400 Call Trace: btrfs_alloc_tree_block+0x39f/0x770 __btrfs_cow_block+0x285/0x9e0 btrfs_cow_block+0x191/0x2e0 btrfs_search_slot+0x492/0x1160 btrfs_lookup_csum+0xec/0x280 btrfs_csum_file_blocks+0x2be/0xa60 add_pending_csums+0xaf/0xf0 btrfs_finish_ordered_io+0x74b/0xc90 finish_ordered_fn+0x15/0x20 normal_work_helper+0xf6/0x500 btrfs_endio_write_helper+0x12/0x20 process_one_work+0x302/0x770 worker_thread+0x81/0x6d0 kthread+0x180/0x1d0 ret_from_fork+0x35/0x40 [CAUSE] That crafted image has missing backref for csum tree root leaf. And when we try to allocate new tree block, since there is no EXTENT/METADATA_ITEM for csum tree root, btrfs consider it's free slot and use it. The extent tree of the image looks like: Normal image | This fuzzed image ----------------------------------+-------------------------------- BG 29360128 | BG 29360128 One empty slot | One empty slot 29364224: backref to UUID tree | 29364224: backref to UUID tree Two empty slots | Two empty slots 29376512: backref to CSUM tree | One empty slot (bad type) <<< 29380608: backref to D_RELOC tree | 29380608: backref to D_RELOC tree ... | ... Since bytenr 29376512 has no METADATA/EXTENT_ITEM, when btrfs try to alloc tree block, it's an valid slot for btrfs. And for finish_ordered_write, when we need to insert csum, we try to CoW csum tree root. By accident, empty slots at bytenr BG_OFFSET, BG_OFFSET + 8K, BG_OFFSET + 12K is already used by tree block COW for other trees, the next empty slot is BG_OFFSET + 16K, which should be the backref for CSUM tree. But due to the bad type, btrfs can recognize it and still consider it as an empty slot, and will try to use it for csum tree CoW. Then in the following call trace, we will try to lock the new tree block, which turns out to be the old csum tree root which is already locked: btrfs_search_slot() called on csum tree root, which is at 29376512 |- btrfs_cow_block() |- btrfs_set_lock_block() | |- Now locks tree block 29376512 (old csum tree root) |- __btrfs_cow_block() |- btrfs_alloc_tree_block() |- btrfs_reserve_extent() | Now it returns tree block 29376512, which extent tree | shows its empty slot, but it's already hold by csum tree |- btrfs_init_new_buffer() |- btrfs_tree_lock() | Triggers WARN_ON(eb->lock_owner == current->pid) |- wait_event() Wait lock owner to release the lock, but it's locked by ourself, so it will deadlock [FIX] This patch will do the lock_owner and current->pid check at btrfs_init_new_buffer(). So above deadlock can be avoided. Since such problem can only happen in crafted image, we will still trigger kernel warning for later aborted transaction, but with a little more meaningful warning message. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200405 Reported-by: Xu Wen <wen.xu@gatech.edu> CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13btrfs: Handle owner mismatch gracefully when walking up treeQu Wenruo
commit 65c6e82becec33731f48786e5a30f98662c86b16 upstream. [BUG] When mounting certain crafted image, btrfs will trigger kernel BUG_ON() when trying to recover balance: kernel BUG at fs/btrfs/extent-tree.c:8956! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 662 Comm: mount Not tainted 4.18.0-rc1-custom+ #10 RIP: 0010:walk_up_proc+0x336/0x480 [btrfs] RSP: 0018:ffffb53540c9b890 EFLAGS: 00010202 Call Trace: walk_up_tree+0x172/0x1f0 [btrfs] btrfs_drop_snapshot+0x3a4/0x830 [btrfs] merge_reloc_roots+0xe1/0x1d0 [btrfs] btrfs_recover_relocation+0x3ea/0x420 [btrfs] open_ctree+0x1af3/0x1dd0 [btrfs] btrfs_mount_root+0x66b/0x740 [btrfs] mount_fs+0x3b/0x16a vfs_kern_mount.part.9+0x54/0x140 btrfs_mount+0x16d/0x890 [btrfs] mount_fs+0x3b/0x16a vfs_kern_mount.part.9+0x54/0x140 do_mount+0x1fd/0xda0 ksys_mount+0xba/0xd0 __x64_sys_mount+0x21/0x30 do_syscall_64+0x60/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe [CAUSE] Extent tree corruption. In this particular case, reloc tree root's owner is DATA_RELOC_TREE (should be TREE_RELOC), thus its backref is corrupted and we failed the owner check in walk_up_tree(). [FIX] It's pretty hard to take care of every extent tree corruption, but at least we can remove such BUG_ON() and exit more gracefully. And since in this particular image, DATA_RELOC_TREE and TREE_RELOC share the same root (which is obviously invalid), we needs to make __del_reloc_root() more robust to detect such invalid sharing to avoid possible NULL dereference as root->node can be NULL in this case. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200411 Reported-by: Xu Wen <wen.xu@gatech.edu> CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13soc/tegra: pmc: Fix child-node lookupJohan Hovold
commit 1dc6bd5e39a29453bdcc17348dd2a89f1aa4004e upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent pmc node could end up being prematurely freed as of_find_node_by_name() drops a reference to its first argument. Fixes: 3568df3d31d6 ("soc: tegra: Add thermal reset (thermtrip) support to PMC") Cc: stable <stable@vger.kernel.org> # 4.0 Cc: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13arm64: dts: stratix10: Correct System Manager register sizeThor Thayer
commit 74121b9aa3cd571ddfff014a9f47db36cae3cda9 upstream. Correct the register size of the System Manager node. Cc: stable@vger.kernel.org Fixes: 78cd6a9d8e154 ("arm64: dts: Add base stratix 10 dtsi") Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13Cramfs: fix abad comparison when wrap-arounds occurNicolas Pitre
commit 672ca9dd13f1aca0c17516f76fc5b0e8344b3e46 upstream. It is possible for corrupted filesystem images to produce very large block offsets that may wrap when a length is added, and wrongly pass the buffer size test. Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-13 23:15:41 +0000