summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-10-05net: stmmac: remove unneeded stmmac_poll_controllerRemi Pommarel
Using netconsole netpoll_poll_dev could be called from interrupt context, thus using disable_irq() would cause the following kernel warning with CONFIG_DEBUG_ATOMIC_SLEEP enabled: BUG: sleeping function called from invalid context at kernel/irq/manage.c:137 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 10, name: ksoftirqd/0 CPU: 0 PID: 10 Comm: ksoftirqd/0 Tainted: G W 5.15.42-00075-g816b502b2298-dirty #117 Hardware name: aml (r1) (DT) Call trace: dump_backtrace+0x0/0x270 show_stack+0x14/0x20 dump_stack_lvl+0x8c/0xac dump_stack+0x18/0x30 ___might_sleep+0x150/0x194 __might_sleep+0x64/0xbc synchronize_irq+0x8c/0x150 disable_irq+0x2c/0x40 stmmac_poll_controller+0x140/0x1a0 netpoll_poll_dev+0x6c/0x220 netpoll_send_skb+0x308/0x390 netpoll_send_udp+0x418/0x760 write_msg+0x118/0x140 [netconsole] console_unlock+0x404/0x500 vprintk_emit+0x118/0x250 dev_vprintk_emit+0x19c/0x1cc dev_printk_emit+0x90/0xa8 __dev_printk+0x78/0x9c _dev_warn+0xa4/0xbc ath10k_warn+0xe8/0xf0 [ath10k_core] ath10k_htt_txrx_compl_task+0x790/0x7fc [ath10k_core] ath10k_pci_napi_poll+0x98/0x1f4 [ath10k_pci] __napi_poll+0x58/0x1f4 net_rx_action+0x504/0x590 _stext+0x1b8/0x418 run_ksoftirqd+0x74/0xa4 smpboot_thread_fn+0x210/0x3c0 kthread+0x1fc/0x210 ret_from_fork+0x10/0x20 Since [0] .ndo_poll_controller is only needed if driver doesn't or partially use NAPI. Because stmmac does so, stmmac_poll_controller can be removed fixing the above warning. [0] commit ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional") Cc: <stable@vger.kernel.org> # 5.15.x Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/1c156a6d8c9170bd6a17825f2277115525b4d50f.1696429960.git.repk@triplefau.lt Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05net: lan743x: also select PHYLIBRandy Dunlap
Since FIXED_PHY depends on PHYLIB, PHYLIB needs to be set to avoid a kconfig warning: WARNING: unmet direct dependencies detected for FIXED_PHY Depends on [n]: NETDEVICES [=y] && PHYLIB [=n] Selected by [y]: - LAN743X [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && PCI [=y] && PTP_1588_CLOCK_OPTIONAL [=y] Fixes: 73c4d1b307ae ("net: lan743x: select FIXED_PHY") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Closes: lore.kernel.org/r/202309261802.JPbRHwti-lkp@intel.com Cc: Bryan Whitehead <bryan.whitehead@microchip.com> Cc: UNGLinuxDriver@microchip.com Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Link: https://lore.kernel.org/r/20231002193544.14529-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05net: ethernet: mediatek: disable irq before schedule napiChristian Marangi
While searching for possible refactor of napi_schedule_prep and __napi_schedule it was notice that the mtk eth driver disable the interrupt for rx and tx AFTER napi is scheduled. While this is a very hard to repro case it might happen to have situation where the interrupt is disabled and never enabled again as the napi completes and the interrupt is enabled before. This is caused by the fact that a napi driven by interrupt expect a logic with: 1. interrupt received. napi prepared -> interrupt disabled -> napi scheduled 2. napi triggered. ring cleared -> interrupt enabled -> wait for new interrupt To prevent this case, disable the interrupt BEFORE the napi is scheduled. Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet") Cc: stable@vger.kernel.org Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20231002140805.568-1-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05HID: Add quirk to ignore the touchscreen battery on HP ENVY 15-eu0556ngFabian Vogt
Like various other devices using similar hardware, this model reports a perpetually empty battery (0-1%). Join the others and apply HID_BATTERY_QUIRK_IGNORE. Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: intel-ish-hid: ipc: Disable and reenable ACPI GPE bitSrinivas Pandruvada
The EHL (Elkhart Lake) based platforms provide a OOB (Out of band) service, which allows to wakup device when the system is in S5 (Soft-Off state). This OOB service can be enabled/disabled from BIOS settings. When enabled, the ISH device gets PME wake capability. To enable PME wakeup, driver also needs to enable ACPI GPE bit. On resume, BIOS will clear the wakeup bit. So driver need to re-enable it in resume function to keep the next wakeup capability. But this BIOS clearing of wakeup bit doesn't decrement internal OS GPE reference count, so this reenabling on every resume will cause reference count to overflow. So first disable and reenable ACPI GPE bit using acpi_disable_gpe(). Fixes: 2e23a70edabe ("HID: intel-ish-hid: ipc: finish power flow for EHL OOB") Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Closes: https://lore.kernel.org/lkml/CAAd53p4=oLYiH2YbVSmrPNj1zpMcfp=Wxbasb5vhMXOWCArLCg@mail.gmail.com/T/ Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: sony: remove duplicate NULL check before calling usb_free_urb()Jiri Kosina
usb_free_urb() does the NULL check itself, so there is no need to duplicate it prior to calling. Reported-by: kernel test robot <lkp@intel.com> Fixes: e1cd4004cde7c9 ("HID: sony: Fix a potential memory leak in sony_probe()") Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: nintendo: reinitialize USB Pro Controller after resuming from suspendMartino Fontana
When suspending the computer, a Switch Pro Controller connected via USB will lose its internal status. However, because the USB connection was technically never lost, when resuming the computer, the driver will attempt to communicate with the controller as if nothing happened (and fail). Because of this, the user was forced to manually disconnect the controller (or to press the sync button on the controller to power it off), so that it can be re-initialized. With this patch, the controller will be automatically re-initialized after resuming from suspend. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216233 Signed-off-by: Martino Fontana <tinozzo123@gmail.com> Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: nvidia-shield: Fix some missing function calls() in the probe error ↵Christophe JAILLET
handling path The commit in Fixes updated the error handling path of thunderstrike_create() and the remove function but not the error handling path of shield_probe(), should an error occur after a successful thunderstrike_create() call. Add the missing calls. Fixes: 3ab196f88237 ("HID: nvidia-shield: Add battery support for Thunderstrike") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: nvidia-shield: Fix a missing led_classdev_unregister() in the probe ↵Christophe JAILLET
error handling path The commit in Fixes updated the error handling path of thunderstrike_create() and the remove function but not the error handling path of shield_probe(), should an error occur after a successful thunderstrike_create() call. Add the missing call. Make sure it is safe to call in the probe error handling path by preventing the led_classdev from attempting to set the LED brightness to the off state on unregister. Fixes: f88af60e74a5 ("HID: nvidia-shield: Support LED functionality for Thunderstrike") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: multitouch: Add required quirk for Synaptics 0xcd7e deviceRahul Rameshbabu
Register the Synaptics device as a special multitouch device with certain quirks that may improve usability of the touchpad device. Reported-by: Rain <rain@sunshowers.io> Closes: https://lore.kernel.org/linux-input/2bbb8e1d-1793-4df1-810f-cb0137341ff4@app.fastmail.com/ Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05Merge branch 'net-mana-fix-some-tx-processing-bugs'Paolo Abeni
Haiyang Zhang says: ==================== net: mana: Fix some TX processing bugs Fix TX processing bugs on error handling, tso_bytes calculation, and sge0 size. ==================== Link: https://lore.kernel.org/r/1696020147-14989-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05net: mana: Fix oversized sge0 for GSO packetsHaiyang Zhang
Handle the case when GSO SKB linear length is too large. MANA NIC requires GSO packets to put only the header part to SGE0, otherwise the TX queue may stop at the HW level. So, use 2 SGEs for the skb linear part which contains more than the packet header. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05net: mana: Fix the tso_bytes calculationHaiyang Zhang
sizeof(struct hop_jumbo_hdr) is not part of tso_bytes, so remove the subtraction from header size. Cc: stable@vger.kernel.org Fixes: bd7fc6e1957c ("net: mana: Add new MANA VF performance counters for easier troubleshooting") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05net: mana: Fix TX CQE error handlingHaiyang Zhang
For an unknown TX CQE error type (probably from a newer hardware), still free the SKB, update the queue tail, etc., otherwise the accounting will be wrong. Also, TX errors can be triggered by injecting corrupted packets, so replace the WARN_ONCE to ratelimited error logging. Cc: stable@vger.kernel.org Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05media: mediatek: vcodec: Fix encoder access NULL pointerIrui Wang
Need to set the private data with encoder device, or will access NULL pointer in encoder handler. Fixes: 1972e32431ed ("media: mediatek: vcodec: Fix possible invalid memory access for encoder") Signed-off-by: Irui Wang <irui.wang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-05gpio: aspeed: fix the GPIO number passed to pinctrl_gpio_set_config()Bartosz Golaszewski
pinctrl_gpio_set_config() expects the GPIO number from the global GPIO numberspace, not the controller-relative offset, which needs to be added to the chip base. Fixes: 5ae4cb94b313 ("gpio: aspeed: Add debounce support") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2023-10-04ksmbd: fix race condition between tree conn lookup and disconnectNamjae Jeon
if thread A in smb2_write is using work-tcon, other thread B use smb2_tree_disconnect free the tcon, then thread A will use free'd tcon. Time + Thread A | Thread A smb2_write | smb2_tree_disconnect | | | kfree(tree_conn) | // UAF! | work->tcon->share_conf | + This patch add state, reference count and lock for tree conn to fix race condition issue. Reported-by: luosili <rootlab@huawei.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04drm/amd/display: apply edge-case DISPCLK WDIVIDER changes to master OTG ↵Samson Tam
pipes only [Why] The edge-case DISPCLK WDIVIDER changes call stream_enc functions. But with MPC pipes, downstream pipes have null stream_enc and will cause crash. [How] Only call stream_enc functions for pipes that are OTG master. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04drm/amd: Fix detection of _PR3 on the PCIe root portMario Limonciello
On some systems with Navi3x dGPU will attempt to use BACO for runtime PM but fails to resume properly. This is because on these systems the root port goes into D3cold which is incompatible with BACO. This happens because in this case dGPU is connected to a bridge between root port which causes BOCO detection logic to fail. Fix the intent of the logic by looking at root port, not the immediate upstream bridge for _PR3. Cc: stable@vger.kernel.org Suggested-by: Jun Ma <Jun.Ma2@amd.com> Tested-by: David Perry <David.Perry@amd.com> Fixes: b10c1c5b3a4e ("drm/amdgpu: add check for ACPI power resources") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04drm/amd: Fix logic error in sienna_cichlid_update_pcie_parameters()Mario Limonciello
While aligning SMU11 with SMU13 implementation an assumption was made that `dpm_context->dpm_tables.pcie_table` was populated in dpm table initialization like in SMU13 but it isn't. So restore some of the original logic and instead just check for amdgpu_device_pcie_dynamic_switching_supported() to decide whether to hardcode values; erring on the side of performance. Cc: stable@vger.kernel.org # 6.1+ Reported-and-tested-by: Umio Yasuno <coelacanth_dream@protonmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1447#note_2101382 Fixes: e701156ccc6c ("drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04drm/amdgpu: Fix a memory leakLuben Tuikov
Fix a memory leak in amdgpu_fru_get_product_info(). Cc: Alex Deucher <Alexander.Deucher@amd.com> Reported-by: Yang Wang <kevinyang.wang@amd.com> Fixes: 0dbf2c562625 ("drm/amdgpu: Interpret IPMI data for product information (v2)") Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04drm/amd/pm: add unique_id for gc 11.0.3Kenneth Feng
add unique_id for gc 11.0.3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04ksmbd: fix race condition from parallel smb2 lock requestsNamjae Jeon
There is a race condition issue between parallel smb2 lock request. Time + Thread A | Thread A smb2_lock | smb2_lock | insert smb_lock to lock_list | spin_unlock(&work->conn->llist_lock) | | | spin_lock(&conn->llist_lock); | kfree(cmp_lock); | // UAF! | list_add(&smb_lock->llist, &rollback_list) + This patch swaps the line for adding the smb lock to the rollback list and adding the lock list of connection to fix the race issue. Reported-by: luosili <rootlab@huawei.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04ksmbd: fix race condition from parallel smb2 logoff requestsNamjae Jeon
If parallel smb2 logoff requests come in before closing door, running request count becomes more than 1 even though connection status is set to KSMBD_SESS_NEED_RECONNECT. It can't get condition true, and sleep forever. This patch fix race condition problem by returning error if connection status was already set to KSMBD_SESS_NEED_RECONNECT. Reported-by: luosili <rootlab@huawei.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04ksmbd: fix uaf in smb20_oplock_break_ackluosili
drop reference after use opinfo. Signed-off-by: luosili <rootlab@huawei.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04ksmbd: fix race condition with fpNamjae Jeon
fp can used in each command. If smb2_close command is coming at the same time, UAF issue can happen by race condition. Time + Thread A | Thread B1 B2 .... B5 smb2_open | smb2_close | __open_id | insert fp to file_table | | | atomic_dec_and_test(&fp->refcount) | if fp->refcount == 0, free fp by kfree. // UAF! | use fp | + This patch add f_state not to use freed fp is used and not to free fp in use. Reported-by: luosili <rootlab@huawei.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04ksmbd: fix race condition between session lookup and expireNamjae Jeon
Thread A + Thread B ksmbd_session_lookup | smb2_sess_setup sess = xa_load | | | xa_erase(&conn->sessions, sess->id); | | ksmbd_session_destroy(sess) --> kfree(sess) | // UAF! | sess->last_active = jiffies | + This patch add rwsem to fix race condition between ksmbd_session_lookup and ksmbd_expire_session. Reported-by: luosili <rootlab@huawei.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04Merge tag 'rtla-v6.6-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux Pull rtla fixes from Daniel Bristot de Oliveira: "rtla (Real-Time Linux Analysis) tool fixes. Timerlat auto-analysis: - Timerlat is reporting thread interference time without thread noise events occurrence. It was caused because the thread interference variable was not reset after the analysis of a timerlat activation that did not hit the threshold. - The IRQ handler delay is estimated from the delta of the IRQ latency reported by timerlat, and the timestamp from IRQ handler start event. If the delta is near-zero, the drift from the external clock and the trace event and/or the overhead can cause the value to be negative. If the value is negative, print a zero-delay. - IRQ handlers happening after the timerlat thread event but before the stop tracing were being reported as IRQ that happened before the *current* IRQ occurrence. Ignore Previous IRQ noise in this condition because they are valid only for the *next* timerlat activation. Timerlat user-space: - Timerlat is stopping all user-space thread if a CPU becomes offline. Do not stop the entire tool if a CPU is/become offline, but only the thread of the unavailable CPU. Stop the tool only, if all threads leave because the CPUs become/are offline. man-pages: - Fix command line example in timerlat hist man page" * tag 'rtla-v6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux: rtla: fix a example in rtla-timerlat-hist.rst rtla/timerlat: Do not stop user-space if a cpu is offline rtla/timerlat_aa: Fix previous IRQ delay for IRQs that happens after thread sample rtla/timerlat_aa: Fix negative IRQ delay rtla/timerlat_aa: Zero thread sum after every sample analysis
2023-10-04netlink: annotate data-races around sk->sk_errEric Dumazet
syzbot caught another data-race in netlink when setting sk->sk_err. Annotate all of them for good measure. BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg write to 0xffff8881613bb220 of 4 bytes by task 28147 on cpu 0: netlink_recvmsg+0x448/0x780 net/netlink/af_netlink.c:1994 sock_recvmsg_nosec net/socket.c:1027 [inline] sock_recvmsg net/socket.c:1049 [inline] __sys_recvfrom+0x1f4/0x2e0 net/socket.c:2229 __do_sys_recvfrom net/socket.c:2247 [inline] __se_sys_recvfrom net/socket.c:2243 [inline] __x64_sys_recvfrom+0x78/0x90 net/socket.c:2243 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd write to 0xffff8881613bb220 of 4 bytes by task 28146 on cpu 1: netlink_recvmsg+0x448/0x780 net/netlink/af_netlink.c:1994 sock_recvmsg_nosec net/socket.c:1027 [inline] sock_recvmsg net/socket.c:1049 [inline] __sys_recvfrom+0x1f4/0x2e0 net/socket.c:2229 __do_sys_recvfrom net/socket.c:2247 [inline] __se_sys_recvfrom net/socket.c:2243 [inline] __x64_sys_recvfrom+0x78/0x90 net/socket.c:2243 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00000000 -> 0x00000016 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 28146 Comm: syz-executor.0 Not tainted 6.6.0-rc3-syzkaller-00055-g9ed22ae6be81 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/06/2023 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231003183455.3410550-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04sctp: update hb timer immediately after users change hb_intervalXin Long
Currently, when hb_interval is changed by users, it won't take effect until the next expiry of hb timer. As the default value is 30s, users have to wait up to 30s to wait its hb_interval update to work. This becomes pretty bad in containers where a much smaller value is usually set on hb_interval. This patch improves it by resetting the hb timer immediately once the value of hb_interval is updated by users. Note that we don't address the already existing 'problem' when sending a heartbeat 'on demand' if one hb has just been sent(from the timer) mentioned in: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg590224.html Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/75465785f8ee5df2fb3acdca9b8fafdc18984098.1696172660.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04sctp: update transport state when processing a dupcook packetXin Long
During the 4-way handshake, the transport's state is set to ACTIVE in sctp_process_init() when processing INIT_ACK chunk on client or COOKIE_ECHO chunk on server. In the collision scenario below: 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] 192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] when processing COOKIE_ECHO on 192.168.1.2, as it's in COOKIE_WAIT state, sctp_sf_do_dupcook_b() is called by sctp_sf_do_5_2_4_dupcook() where it creates a new association and sets its transport to ACTIVE then updates to the old association in sctp_assoc_update(). However, in sctp_assoc_update(), it will skip the transport update if it finds a transport with the same ipaddr already existing in the old asoc, and this causes the old asoc's transport state not to move to ACTIVE after the handshake. This means if DATA retransmission happens at this moment, it won't be able to enter PF state because of the check 'transport->state == SCTP_ACTIVE' in sctp_do_8_2_transport_strike(). This patch fixes it by updating the transport in sctp_assoc_update() with sctp_assoc_add_peer() where it updates the transport state if there is already a transport with the same ipaddr exists in the old asoc. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/fd17356abe49713ded425250cc1ae51e9f5846c6.1696172325.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04tcp: fix delayed ACKs for MSS boundary conditionNeal Cardwell
This commit fixes poor delayed ACK behavior that can cause poor TCP latency in a particular boundary condition: when an application makes a TCP socket write that is an exact multiple of the MSS size. The problem is that there is painful boundary discontinuity in the current delayed ACK behavior. With the current delayed ACK behavior, we have: (1) If an app reads data when > 1*MSS is unacknowledged, then tcp_cleanup_rbuf() ACKs immediately because of: tp->rcv_nxt - tp->rcv_wup > icsk->icsk_ack.rcv_mss || (2) If an app reads all received data, and the packets were < 1*MSS, and either (a) the app is not ping-pong or (b) we received two packets < 1*MSS, then tcp_cleanup_rbuf() ACKs immediately beecause of: ((icsk->icsk_ack.pending & ICSK_ACK_PUSHED2) || ((icsk->icsk_ack.pending & ICSK_ACK_PUSHED) && !inet_csk_in_pingpong_mode(sk))) && (3) *However*: if an app reads exactly 1*MSS of data, tcp_cleanup_rbuf() does not send an immediate ACK. This is true even if the app is not ping-pong and the 1*MSS of data had the PSH bit set, suggesting the sending application completed an application write. Thus if the app is not ping-pong, we have this painful case where >1*MSS gets an immediate ACK, and <1*MSS gets an immediate ACK, but a write whose last skb is an exact multiple of 1*MSS can get a 40ms delayed ACK. This means that any app that transfers data in one direction and takes care to align write size or packet size with MSS can suffer this problem. With receive zero copy making 4KB MSS values more common, it is becoming more common to have application writes naturally align with MSS, and more applications are likely to encounter this delayed ACK problem. The fix in this commit is to refine the delayed ACK heuristics with a simple check: immediately ACK a received 1*MSS skb with PSH bit set if the app reads all data. Why? If an skb has a len of exactly 1*MSS and has the PSH bit set then it is likely the end of an application write. So more data may not be arriving soon, and yet the data sender may be waiting for an ACK if cwnd-bound or using TX zero copy. Thus we set ICSK_ACK_PUSHED in this case so that tcp_cleanup_rbuf() will send an ACK immediately if the app reads all of the data and is not ping-pong. Note that this logic is also executed for the case where len > MSS, but in that case this logic does not matter (and does not hurt) because tcp_cleanup_rbuf() will always ACK immediately if the app reads data and there is more than an MSS of unACKed data. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Xin Guo <guoxin0309@gmail.com> Link: https://lore.kernel.org/r/20231001151239.1866845-2-ncardwell.sw@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04tcp: fix quick-ack counting to count actual ACKs of new dataNeal Cardwell
This commit fixes quick-ack counting so that it only considers that a quick-ack has been provided if we are sending an ACK that newly acknowledges data. The code was erroneously using the number of data segments in outgoing skbs when deciding how many quick-ack credits to remove. This logic does not make sense, and could cause poor performance in request-response workloads, like RPC traffic, where requests or responses can be multi-segment skbs. When a TCP connection decides to send N quick-acks, that is to accelerate the cwnd growth of the congestion control module controlling the remote endpoint of the TCP connection. That quick-ack decision is purely about the incoming data and outgoing ACKs. It has nothing to do with the outgoing data or the size of outgoing data. And in particular, an ACK only serves the intended purpose of allowing the remote congestion control to grow the congestion window quickly if the ACK is ACKing or SACKing new data. The fix is simple: only count packets as serving the goal of the quickack mechanism if they are ACKing/SACKing new data. We can tell whether this is the case by checking inet_csk_ack_scheduled(), since we schedule an ACK exactly when we are ACKing/SACKing new data. Fixes: fc6415bcb0f5 ("[TCP]: Fix quick-ack decrementing with TSO.") Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20231001151239.1866845-1-ncardwell.sw@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04Merge tag 'nf-23-10-04' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Florian Westphal says: ==================== netfilter patches for net First patch resolves a regression with vlan header matching, this was broken since 6.5 release. From myself. Second patch fixes an ancient problem with sctp connection tracking in case INIT_ACK packets are delayed. This comes with a selftest, both patches from Xin Long. Patch 4 extends the existing nftables audit selftest, from Phil Sutter. Patch 5, also from Phil, avoids a situation where nftables would emit an audit record twice. This was broken since 5.13 days. Patch 6, from myself, avoids spurious insertion failure if we encounter an overlapping but expired range during element insertion with the 'nft_set_rbtree' backend. This problem exists since 6.2. * tag 'nf-23-10-04' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure netfilter: nf_tables: Deduplicate nft_register_obj audit logs selftests: netfilter: Extend nft_audit.sh selftests: netfilter: test for sctp collision processing in nf_conntrack netfilter: handle the connecting collision properly in nf_conntrack_proto_sctp netfilter: nft_payload: rebuild vlan header on h_proto access ==================== Link: https://lore.kernel.org/r/20231004141405.28749-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04page_pool: fix documentation typosRandy Dunlap
Correct grammar for better readability. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Link: https://lore.kernel.org/r/20231001003846.29541-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04smb: client: do not start laundromat thread on nohandlecachePaulo Alcantara
Honor 'nohandlecache' mount option by not starting laundromat thread even when SMB server supports directory leases. Do not waste system resources by having laundromat thread running with no directory caching at all. Fixes: 2da338ff752a ("smb3: do not start laundromat thread when dir leases disabled") Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04smb: use kernel_connect() and kernel_bind()Jordan Rife
Recent changes to kernel_connect() and kernel_bind() ensure that callers are insulated from changes to the address parameter made by BPF SOCK_ADDR hooks. This patch wraps direct calls to ops->connect() and ops->bind() with kernel_connect() and kernel_bind() to ensure that SMB mounts do not see their mount address overwritten in such cases. Link: https://lore.kernel.org/netdev/9944248dba1bce861375fcce9de663934d933ba9.camel@redhat.com/ Cc: <stable@vger.kernel.org> # 6.0+ Signed-off-by: Jordan Rife <jrife@google.com> Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04tipc: fix a potential deadlock on &tx->lockChengfeng Ye
It seems that tipc_crypto_key_revoke() could be be invoked by wokequeue tipc_crypto_work_rx() under process context and timer/rx callback under softirq context, thus the lock acquisition on &tx->lock seems better use spin_lock_bh() to prevent possible deadlock. This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. tipc_crypto_work_rx() <workqueue> --> tipc_crypto_key_distr() --> tipc_bcast_xmit() --> tipc_bcbase_xmit() --> tipc_bearer_bc_xmit() --> tipc_crypto_xmit() --> tipc_ehdr_build() --> tipc_crypto_key_revoke() --> spin_lock(&tx->lock) <timer interrupt> --> tipc_disc_timeout() --> tipc_bearer_xmit_skb() --> tipc_crypto_xmit() --> tipc_ehdr_build() --> tipc_crypto_key_revoke() --> spin_lock(&tx->lock) <deadlock here> Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication") Link: https://lore.kernel.org/r/20230927181414.59928-1-dg573847474@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04net: stmmac: dwmac-stm32: fix resume on STM32 MCUBen Wolsieffer
The STM32MP1 keeps clk_rx enabled during suspend, and therefore the driver does not enable the clock in stm32_dwmac_init() if the device was suspended. The problem is that this same code runs on STM32 MCUs, which do disable clk_rx during suspend, causing the clock to never be re-enabled on resume. This patch adds a variant flag to indicate that clk_rx remains enabled during suspend, and uses this to decide whether to enable the clock in stm32_dwmac_init() if the device was suspended. This approach fixes this specific bug with limited opportunity for unintended side-effects, but I have a follow up patch that will refactor the clock configuration and hopefully make it less error prone. Fixes: 6528e02cc9ff ("net: ethernet: stmmac: add adaptation for stm32mp157c.") Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230927175749.1419774-1-ben.wolsieffer@hefring.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04HID: nvidia-shield: Select POWER_SUPPLY Kconfig optionRahul Rameshbabu
Battery information reported by the driver depends on the power supply subsystem. Select the required subsystem when the HID_NVIDIA_SHIELD Kconfig option is enabled. Fixes: 3ab196f88237 ("HID: nvidia-shield: Add battery support for Thunderstrike") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-04PM: hibernate: Fix copying the zero bitmap to safe pagesPavankumar Kondeti
The following crash is observed 100% of the time during resume from the hibernation on a x86 QEMU system. [ 12.931887] ? __die_body+0x1a/0x60 [ 12.932324] ? page_fault_oops+0x156/0x420 [ 12.932824] ? search_exception_tables+0x37/0x50 [ 12.933389] ? fixup_exception+0x21/0x300 [ 12.933889] ? exc_page_fault+0x69/0x150 [ 12.934371] ? asm_exc_page_fault+0x26/0x30 [ 12.934869] ? get_buffer.constprop.0+0xac/0x100 [ 12.935428] snapshot_write_next+0x7c/0x9f0 [ 12.935929] ? submit_bio_noacct_nocheck+0x2c2/0x370 [ 12.936530] ? submit_bio_noacct+0x44/0x2c0 [ 12.937035] ? hib_submit_io+0xa5/0x110 [ 12.937501] load_image+0x83/0x1a0 [ 12.937919] swsusp_read+0x17f/0x1d0 [ 12.938355] ? create_basic_memory_bitmaps+0x1b7/0x240 [ 12.938967] load_image_and_restore+0x45/0xc0 [ 12.939494] software_resume+0x13c/0x180 [ 12.939994] resume_store+0xa3/0x1d0 The commit being fixed introduced a bug in copying the zero bitmap to safe pages. A temporary bitmap is allocated with PG_ANY flag in prepare_image() to make a copy of zero bitmap after the unsafe pages are marked. Freeing this temporary bitmap with PG_UNSAFE_KEEP later results in an inconsistent state of unsafe pages. Since free bit is left as is for this temporary bitmap after free, these pages are treated as unsafe pages when they are allocated again. This results in incorrect calculation of the number of pages pre-allocated for the image. nr_pages = (nr_zero_pages + nr_copy_pages) - nr_highmem - allocated_unsafe_pages; The allocate_unsafe_pages is estimated to be higher than the actual which results in running short of pages in safe_pages_list. Hence the crash is observed in get_buffer() due to NULL pointer access of safe_pages_list. Fix this issue by creating the temporary zero bitmap from safe pages (free bit not set) so that the corresponding free bits can be cleared while freeing this bitmap. Fixes: 005e8dddd497 ("PM: hibernate: don't store zero pages in the image file") Suggested-by:: Brian Geffon <bgeffon@google.com> Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Reviewed-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-10-04ipv4: Set offload_failed flag in fibmatch resultsBenjamin Poirier
Due to a small omission, the offload_failed flag is missing from ipv4 fibmatch results. Make sure it is set correctly. The issue can be witnessed using the following commands: echo "1 1" > /sys/bus/netdevsim/new_device ip link add dummy1 up type dummy ip route add 192.0.2.0/24 dev dummy1 echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/fib/fail_route_offload ip route add 198.51.100.0/24 dev dummy1 ip route # 192.168.15.0/24 has rt_trap # 198.51.100.0/24 has rt_offload_failed ip route get 192.168.15.1 fibmatch # Result has rt_trap ip route get 198.51.100.1 fibmatch # Result differs from the route shown by `ip route`, it is missing # rt_offload_failed ip link del dev dummy1 echo 1 > /sys/bus/netdevsim/del_device Fixes: 36c5100e859d ("IPv4: Add "offload failed" indication to routes") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230926182730.231208-1-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04Merge tag 'linux-kselftest-fixes-6.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fix from Shuah Khan: "One single fix to Makefile to fix the incorrect TARGET name for uevent test" * tag 'linux-kselftest-fixes-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: Fix wrong TARGET in kselftest top level Makefile
2023-10-04Merge tag 'wireless-2023-09-27' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Quite a collection of fixes this time, really too many to list individually. Many stack fixes, even rfkill (found by simulation and the new eevdf scheduler)! Also a bigger maintainers file cleanup, to remove old and redundant information. * tag 'wireless-2023-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (32 commits) wifi: iwlwifi: mvm: Fix incorrect usage of scan API wifi: mac80211: Create resources for disabled links wifi: cfg80211: avoid leaking stack data into trace wifi: mac80211: allow transmitting EAPOL frames with tainted key wifi: mac80211: work around Cisco AP 9115 VHT MPDU length wifi: cfg80211: Fix 6GHz scan configuration wifi: mac80211: fix potential key leak wifi: mac80211: fix potential key use-after-free wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling wifi: brcmfmac: Replace 1-element arrays with flexible arrays wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet wifi: rtw88: rtw8723d: Fix MAC address offset in EEPROM rfkill: sync before userspace visibility/changes wifi: mac80211: fix mesh id corruption on 32 bit systems wifi: cfg80211: add missing kernel-doc for cqm_rssi_work wifi: cfg80211: fix cqm_config access race wifi: iwlwifi: mvm: Fix a memory corruption issue wifi: iwlwifi: Ensure ack flag is properly cleared. wifi: iwlwifi: dbg_ini: fix structure packing iwlwifi: mvm: handle PS changes in vif_cfg_changed ... ==================== Link: https://lore.kernel.org/r/20230927095835.25803-2-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04cpuidle, ACPI: Evaluate LPI arch_flags for broadcast timerOza Pawandeep
Arm® Functional Fixed Hardware Specification defines LPI states, which provide an architectural context loss flags field that can be used to describe the context that might be lost when an LPI state is entered. - Core context Lost - General purpose registers. - Floating point and SIMD registers. - System registers, include the System register based - generic timer for the core. - Debug register in the core power domain. - PMU registers in the core power domain. - Trace register in the core power domain. - Trace context loss - GICR - GICD Qualcomm's custom CPUs preserves the architectural state, including keeping the power domain for local timers active. when core is power gated, the local timers are sufficient to wake the core up without needing broadcast timer. The patch fixes the evaluation of cpuidle arch_flags, and moves only to broadcast timer if core context lost is defined in ACPI LPI. Fixes: a36a7fecfe60 ("ACPI / processor_idle: Add support for Low Power Idle(LPI) states") Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Oza Pawandeep <quic_poza@quicinc.com> Link: https://lore.kernel.org/r/20231003173333.2865323-1-quic_poza@quicinc.com Signed-off-by: Will Deacon <will@kernel.org>
2023-10-04Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-10-02 We've added 11 non-merge commits during the last 12 day(s) which contain a total of 12 files changed, 176 insertions(+), 41 deletions(-). The main changes are: 1) Fix BPF verifier to reset backtrack_state masks on global function exit as otherwise subsequent precision tracking would reuse them, from Andrii Nakryiko. 2) Several sockmap fixes for available bytes accounting, from John Fastabend. 3) Reject sk_msg egress redirects to non-TCP sockets given this is only supported for TCP sockets today, from Jakub Sitnicki. 4) Fix a syzkaller splat in bpf_mprog when hitting maximum program limits with BPF_F_BEFORE directive, from Daniel Borkmann and Nikolay Aleksandrov. 5) Fix BPF memory allocator to use kmalloc_size_roundup() to adjust size_index for selecting a bpf_mem_cache, from Hou Tao. 6) Fix arch_prepare_bpf_trampoline return code for s390 JIT, from Song Liu. 7) Fix bpf_trampoline_get when CONFIG_BPF_JIT is turned off, from Leon Hwang. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Use kmalloc_size_roundup() to adjust size_index selftest/bpf: Add various selftests for program limits bpf, mprog: Fix maximum program check on mprog attachment bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets bpf, sockmap: Add tests for MSG_F_PEEK bpf, sockmap: Do not inc copied_seq when PEEK flag set bpf: tcp_read_skb needs to pop skb regardless of seq bpf: unconditionally reset backtrack_state masks on global func exit bpf: Fix tr dereferencing selftests/bpf: Check bpf_cubic_acked() is called via struct_ops s390/bpf: Let arch_prepare_bpf_trampoline return program size ==================== Link: https://lore.kernel.org/r/20231002113417.2309-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04dt-bindings: media: renesas,vin: Fix field-even-active spellingGeert Uytterhoeven
make dt_binding_check: field-active-even: missing type definition The property is named "field-even-active", not "field-active-even". Fixes: 3ab7801dfab998a2 ("media: dt-bindings: media: rcar-vin: Describe optional ep properties") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/c999eef0a14c8678f56eb698d27b2243e09afed4.1696328563.git.geert+renesas@glider.be Signed-off-by: Rob Herring <robh@kernel.org>
2023-10-04netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failureFlorian Westphal
nft_rbtree_gc_elem() walks back and removes the end interval element that comes before the expired element. There is a small chance that we've cached this element as 'rbe_ge'. If this happens, we hold and test a pointer that has been queued for freeing. It also causes spurious insertion failures: $ cat test-testcases-sets-0044interval_overlap_0.1/testout.log Error: Could not process rule: File exists add element t s { 0 - 2 } ^^^^^^ Failed to insert 0 - 2 given: table ip t { set s { type inet_service flags interval,timeout timeout 2s gc-interval 2s } } The set (rbtree) is empty. The 'failure' doesn't happen on next attempt. Reason is that when we try to insert, the tree may hold an expired element that collides with the range we're adding. While we do evict/erase this element, we can trip over this check: if (rbe_ge && nft_rbtree_interval_end(rbe_ge) && nft_rbtree_interval_end(new)) return -ENOTEMPTY; rbe_ge was erased by the synchronous gc, we should not have done this check. Next attempt won't find it, so retry results in successful insertion. Restart in-kernel to avoid such spurious errors. Such restart are rare, unless userspace intentionally adds very large numbers of elements with very short timeouts while setting a huge gc interval. Even in this case, this cannot loop forever, on each retry an existing element has been removed. As the caller is holding the transaction mutex, its impossible for a second entity to add more expiring elements to the tree. After this it also becomes feasible to remove the async gc worker and perform all garbage collection from the commit path. Fixes: c9e6978e2725 ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection") Signed-off-by: Florian Westphal <fw@strlen.de>
2023-10-04netfilter: nf_tables: Deduplicate nft_register_obj audit logsPhil Sutter
When adding/updating an object, the transaction handler emits suitable audit log entries already, the one in nft_obj_notify() is redundant. To fix that (and retain the audit logging from objects' 'update' callback), Introduce an "audit log free" variant for internal use. Fixes: c520292f29b8 ("audit: log nftables configuration change events once per table") Signed-off-by: Phil Sutter <phil@nwl.cc> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> (Audit) Signed-off-by: Florian Westphal <fw@strlen.de>
2023-10-04dt-bindings: cache: andestech,ax45mp-cache: Fix unit address in exampleGeert Uytterhoeven
The unit address in the example does not match the reg property. Correct the unit address to match reality. Fixes: 3e7bf4685e42786d ("dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/7b93655219a6ad696dd3faa9f36fde6b094694a9.1696330005.git.geert+renesas@glider.be Signed-off-by: Rob Herring <robh@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-13 00:36:54 +0000