summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-05-26xen-pciback: redo VF placement in the virtual topologyJan Beulich
commit 4ba50e7c423c29639878c00573288869aa627068 upstream. The commit referenced below was incomplete: It merely affected what would get written to the vdev-<N> xenstore node. The guest would still find the function at the original function number as long as __xen_pcibk_get_pci_dev() wouldn't be in sync. The same goes for AER wrt __xen_pcibk_get_pcifront_dev(). Undo overriding the function to zero and instead make sure that VFs at function zero remain alone in their slot. This has the added benefit of improving overall capacity, considering that there's only a total of 32 slots available right now (PCI segment and bus can both only ever be zero at present). Fixes: 8a5248fe10b1 ("xen PV passthru: assign SR-IOV virtual functions to separate virtual slots") Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/8def783b-404c-3452-196d-3f3fd4d72c9e@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26gpio: tegra186: Don't set parent IRQ affinityJon Hunter
commit bdbe871ef0caa660e16461a2a94579d9f9ef7ba4 upstream. When hotplugging CPUs on Tegra186 and Tegra194 errors such as the following are seen ... IRQ63: set affinity failed(-22). IRQ65: set affinity failed(-22). IRQ66: set affinity failed(-22). IRQ67: set affinity failed(-22). Looking at the /proc/interrupts the above are all interrupts associated with GPIOs. The reason why these error messages occur is because there is no 'parent_data' associated with any of the GPIO interrupts and so tegra186_irq_set_affinity() simply returns -EINVAL. To understand why there is no 'parent_data' it is first necessary to understand that in addition to the GPIO interrupts being routed to the interrupt controller (GIC), the interrupts for some GPIOs are also routed to the Tegra Power Management Controller (PMC) to wake up the system from low power states. In order to configure GPIO events as wake events in the PMC, the PMC is configured as IRQ parent domain for the GPIO IRQ domain. Originally the GIC was the IRQ parent domain of the PMC and although this was working, this started causing issues once commit 64a267e9a41c ("irqchip/gic: Configure SGIs as standard interrupts") was added, because technically, the GIC is not a parent of the PMC. Commit c351ab7bf2a5 ("soc/tegra: pmc: Don't create fake interrupt hierarchy levels") fixed this by severing the IRQ domain hierarchy for the Tegra GPIOs and hence, there may be no IRQ parent domain for the GPIOs. The GPIO controllers on Tegra186 and Tegra194 have either one or six interrupt lines to the interrupt controller. For GPIO controllers with six interrupts, the mapping of the GPIO interrupt to the controller interrupt is configurable within the GPIO controller. Currently a default mapping is used, however, it could be possible to use the set affinity callback for the Tegra186 GPIO driver to do something a bit more interesting. Currently, because interrupts for all GPIOs are have the same mapping and any attempts to configure the affinity for a given GPIO can conflict with another that shares the same IRQ, for now it is simpler to just remove set affinity support and this avoids the above warnings being seen. Cc: <stable@vger.kernel.org> Fixes: c4e1f7d92cd6 ("gpio: tegra186: Set affinity callback to parent") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26mmc: meson-gx: also check SD_IO_RW_EXTENDED for scatterlist size alignmentNeil Armstrong
commit 9b81354d7ebc1fd17f666a168dcabf27dae290bd upstream. The brcmfmac driver can generate a scatterlist from a skb with each packets not aligned to the block size. This is not supported by the Amlogic Descriptor dma engine where each descriptor must match a multiple of the block size. The sg list is valid, since the sum of the sg buffers is a multiple of the block size, but we must discard those when in SD_IO_RW_EXTENDED mode since SDIO block mode can be used under the hood even with data->blocks == 1. Those transfers are very rare, thus can be replaced by a bounce buffer without real performance loss. Fixes: 7412dee9f1fd ("mmc: meson-gx: replace WARN_ONCE with dev_warn_once about scatterlist size alignment in block mode") Cc: stable@vger.kernel.org Reported-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210426175559.3110575-2-narmstrong@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26mmc: meson-gx: make replace WARN_ONCE with dev_warn_once about scatterlist ↵Neil Armstrong
offset alignment commit cabb1bb60e88ccaaa122ba01862403cd44e8e8f8 upstream. Some drivers like ath10k can sometimg give an sg buffer with an offset whose alignment is not compatible with the Amlogic DMA descriptor engine requirements. Simply replace with dev_warn_once() to inform user this should be fixed to avoid degraded performance. This should be ultimately fixed in ath10k, but since it's only a performance issue the warning should be removed. Fixes: 79ed05e329c3 ("mmc: meson-gx: add support for descriptor chain mode") Cc: stable@vger.kernel.org Reported-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210426175559.3110575-1-narmstrong@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26mmc: sdhci-pci-gli: increase 1.8V regulator waitDaniel Beer
commit a1149a6c06ee094a6e62886b0c0e8e66967a728a upstream. Inserting an SD-card on an Intel NUC10i3FNK4 (which contains a GL9755) results in the message: mmc0: 1.8V regulator output did not become stable Following this message, some cards work (sometimes), but most cards fail with EILSEQ. This behaviour is observed on Debian 10 running kernel 4.19.188, but also with 5.8.18 and 5.11.15. The driver currently waits 5ms after switching on the 1.8V regulator for it to become stable. Increasing this to 10ms gets rid of the warning about stability, but most cards still fail. Increasing it to 20ms gets some cards working (a 32GB Samsung micro SD works, a 128GB ADATA doesn't). At 50ms, the ADATA works most of the time, and at 100ms both cards work reliably. Signed-off-by: Daniel Beer <dlbeer@gmail.com> Acked-by: Ben Chuang <benchuanggli@gmail.com> Fixes: e51df6ce668a ("mmc: host: sdhci-pci: Add Genesys Logic GL975x support") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210424081652.GA16047@nyquist.nev Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26powerpc/64s/syscall: Fix ptrace syscall info with scv syscallsNicholas Piggin
commit d72500f992849d31ebae8f821a023660ddd0dcc2 upstream. The scv implementation missed updating syscall return value and error value get/set functions to deal with the changed register ABI. This broke ptrace PTRACE_GET_SYSCALL_INFO as well as some kernel auditing and tracing functions. Fix. tools/testing/selftests/ptrace/get_syscall_info now passes when scv is used. Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions") Cc: stable@vger.kernel.org # v5.9+ Reported-by: "Dmitry V. Levin" <ldv@altlinux.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210520111931.2597127-2-npiggin@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference ↵Nicholas Piggin
between sc and scv syscalls commit 5665bc35c1ed917ac8fd06cb651317bb47a65b10 upstream. The sc and scv 0 system calls have different ABI conventions, and ptracers need to know which system call type is being used if they want to look at the syscall registers. Document that pt_regs.trap can be used for this, and fix one in-tree user to work with scv 0 syscalls. Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions") Cc: stable@vger.kernel.org # v5.9+ Reported-by: "Dmitry V. Levin" <ldv@altlinux.org> Suggested-by: "Dmitry V. Levin" <ldv@altlinux.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210520111931.2597127-1-npiggin@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26dma-buf: fix unintended pin/unpin warningsChristian König
commit 7e008b02557ccece4d2c31fb0eaf6243cbc87121 upstream. DMA-buf internal users call the pin/unpin functions without having a dynamic attachment. Avoid the warning and backtrace in the logs. Signed-off-by: Christian König <christian.koenig@amd.com> Bugs: https://gitlab.freedesktop.org/drm/intel/-/issues/3481 Fixes: c545781e1c55 ("dma-buf: doc polish for pin/unpin") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> CC: stable@kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20210517115705.2141-1-christian.koenig@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26drm/amdgpu: update sdma golden setting for Navi12Guchun Chen
commit 77194d8642dd4cb7ea8ced77bfaea55610574c38 upstream. Current golden setting is out of date. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26drm/amdgpu: update gc golden setting for Navi12Guchun Chen
commit 99c45ba5799d6b938bd9bd20edfeb6f3e3e039b9 upstream. Current golden setting is out of date. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26drm/amdgpu: disable 3DCGCG on picasso/raven1 to avoid compute hangChangfeng
commit dbd1003d1252db5973dddf20b24bb0106ac52aa2 upstream. There is problem with 3DCGCG firmware and it will cause compute test hang on picasso/raven1. It needs to disable 3DCGCG in driver to avoid compute hang. Signed-off-by: Changfeng <Changfeng.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26drm/amdgpu: Fix GPU TLB update error when PAGE_SIZE > AMDGPU_PAGE_SIZEYi Li
commit d53751568359e5b3ffb859b13cbd79dc77a571f1 upstream. When PAGE_SIZE is larger than AMDGPU_PAGE_SIZE, the number of GPU TLB entries which need to update in amdgpu_map_buffer() should be multiplied by AMDGPU_GPU_PAGES_IN_CPU_PAGE (PAGE_SIZE / AMDGPU_PAGE_SIZE). Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Yi Li <liyi@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26drm/radeon: use the dummy page for GART if neededChristian König
commit 0c8df343c200529e6b9820bdfed01814140f75e4 upstream. Imported BOs don't have a pagelist any more. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Fixes: 0575ff3d33cd ("drm/radeon: stop using pages with drm_prime_sg_to_page_addr_arrays v2") CC: stable@vger.kernel.org # 5.12 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26drm/amd/display: Use the correct max downscaling value for DCN3.x familyNikola Cornij
commit 84c63d040938f64a7dc195696301166e75231bf5 upstream. [why] As per spec, DCN3.x can do 6:1 downscaling and DCN2.x can do 4:1. The max downscaling limit value for DCN2.x is 250, which means it's calculated as 1000 / 4 = 250. For DCN3.x this then gives 1000 / 6 = 167. [how] Set maximum downscaling limit to 167 for DCN3.x Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26drm/i915/gem: Pin the L-shape quirked object as unshrinkableChris Wilson
commit 036867e93ebf4d7e70eba6a8c72db74ee3760bc3 upstream. When instantiating a tiled object on an L-shaped memory machine, we mark the object as unshrinkable to prevent the shrinker from trying to swap out the pages. We have to do this as we do not know the swizzling on the individual pages, and so the data will be scrambled across swap out/in. Not only do we need to move the object off the shrinker list, we need to mark the object with shrink_pin so that the counter is consistent across calls to madvise. v2: in the madvise ioctl we need to check if the object is currently shrinkable/purgeable, not if the object type supports shrinking Fixes: 0175969e489a ("drm/i915/gem: Use shrinkable status for unknown swizzle quirks") References: https://gitlab.freedesktop.org/drm/intel/-/issues/3293 References: https://gitlab.freedesktop.org/drm/intel/-/issues/3450 Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: <stable@vger.kernel.org> # v5.12+ Link: https://patchwork.freedesktop.org/patch/msgid/20210517084640.18862-1-matthew.auld@intel.com (cherry picked from commit 8777d17b68dcfbfbd4d524f444adefae56f41225) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26x86/sev-es: Forward page-faults which happen during emulationJoerg Roedel
commit c25bbdb564060adaad5c3a8a10765c13487ba6a3 upstream. When emulating guest instructions for MMIO or IOIO accesses, the #VC handler might get a page-fault and will not be able to complete. Forward the page-fault in this case to the correct handler instead of killing the machine. Fixes: 0786138c78e7 ("x86/sev-es: Add a Runtime #VC Exception Handler") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org # v5.10+ Link: https://lkml.kernel.org/r/20210519135251.30093-3-joro@8bytes.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26x86/sev-es: Use __put_user()/__get_user() for data accessesJoerg Roedel
commit 4954f5b8ef0baf70fe978d1a99a5f70e4dd5c877 upstream. The put_user() and get_user() functions do checks on the address which is passed to them. They check whether the address is actually a user-space address and whether its fine to access it. They also call might_fault() to indicate that they could fault and possibly sleep. All of these checks are neither wanted nor needed in the #VC exception handler, which can be invoked from almost any context and also for MMIO instructions from kernel space on kernel memory. All the #VC handler wants to know is whether a fault happened when the access was tried. This is provided by __put_user()/__get_user(), which just do the access no matter what. Also add comments explaining why __get_user() and __put_user() are the best choice here and why it is safe to use them in this context. Also explain why copy_to/from_user can't be used. In addition, also revert commit 7024f60d6552 ("x86/sev-es: Handle string port IO to kernel memory properly") because using __get_user()/__put_user() fixes the same problem while the above commit introduced several problems: 1) It uses access_ok() which is only allowed in task context. 2) It uses memcpy() which has no fault handling at all and is thus unsafe to use here. [ bp: Fix up commit ID of the reverted commit above. ] Fixes: f980f9c31a92 ("x86/sev-es: Compile early handler code into kernel image") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org # v5.10+ Link: https://lkml.kernel.org/r/20210519135251.30093-4-joro@8bytes.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26x86/sev-es: Don't return NULL from sev_es_get_ghcb()Joerg Roedel
commit b250f2f7792d15bcde98e0456781e2835556d5fa upstream. sev_es_get_ghcb() is called from several places but only one of them checks the return value. The reaction to returning NULL is always the same: calling panic() and kill the machine. Instead of adding checks to all call sites, move the panic() into the function itself so that it will no longer return NULL. Fixes: 0786138c78e7 ("x86/sev-es: Add a Runtime #VC Exception Handler") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org # v5.10+ Link: https://lkml.kernel.org/r/20210519135251.30093-2-joro@8bytes.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26x86/sev-es: Invalidate the GHCB after completing VMGEXITTom Lendacky
commit a50c5bebc99c525e7fbc059988c6a5ab8680cb76 upstream. Since the VMGEXIT instruction can be issued from userspace, invalidate the GHCB after performing VMGEXIT processing in the kernel. Invalidation is only required after userspace is available, so call vc_ghcb_invalidate() from sev_es_put_ghcb(). Update vc_ghcb_invalidate() to additionally clear the GHCB exit code so that it is always presented as 0 when VMGEXIT has been issued by anything else besides the kernel. Fixes: 0786138c78e79 ("x86/sev-es: Add a Runtime #VC Exception Handler") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/5a8130462e4f0057ee1184509cd056eedd78742b.1621273353.git.thomas.lendacky@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patchTom Lendacky
commit fea63d54f7a3e74f8ab489a8b82413a29849a594 upstream. Move the location of sev_es_put_ghcb() in preparation for an update to it in a follow-on patch. This will better highlight the changes being made to the function. No functional change. Fixes: 0786138c78e79 ("x86/sev-es: Add a Runtime #VC Exception Handler") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/8c07662ec17d3d82e5c53841a1d9e766d3bdbab6.1621273353.git.thomas.lendacky@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26x86/build: Fix location of '-plugin-opt=' flagsNathan Chancellor
commit 0024430e920f2900654ad83cd081cf52e02a3ef5 upstream. Commit b33fff07e3e3 ("x86, build: allow LTO to be selected") added a couple of '-plugin-opt=' flags to KBUILD_LDFLAGS because the code model and stack alignment are not stored in LLVM bitcode. However, these flags were added to KBUILD_LDFLAGS prior to the emulation flag assignment, which uses ':=', so they were overwritten and never added to $(LD) invocations. The absence of these flags caused misalignment issues in the AMDGPU driver when compiling with CONFIG_LTO_CLANG, resulting in general protection faults. Shuffle the assignment below the initial one so that the flags are properly passed along and all of the linker flags stay together. At the same time, avoid any future issues with clobbering flags by changing the emulation flag assignment to '+=' since KBUILD_LDFLAGS is already defined with ':=' in the main Makefile before being exported for modification here as a result of commit: ce99d0bf312d ("kbuild: clear LDFLAGS in the top Makefile") Fixes: b33fff07e3e3 ("x86, build: allow LTO to be selected") Reported-by: Anthony Ruhier <aruhier@mailbox.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Anthony Ruhier <aruhier@mailbox.org> Cc: stable@vger.kernel.org Link: https://github.com/ClangBuiltLinux/linux/issues/1374 Link: https://lore.kernel.org/r/20210518190106.60935-1-nathan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26nvme-tcp: fix possible use-after-completionSagi Grimberg
commit 825619b09ad351894d2c6fb6705f5b3711d145c7 upstream. Commit db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context") added a second context that may perform a network send. This means that now RX and TX are not serialized in nvme_tcp_io_work and can run concurrently. While there is correct mutual exclusion in the TX path (where the send_mutex protect the queue socket send activity) RX activity, and more specifically request completion may run concurrently. This means we must guarantee that any mutation of the request state related to its lifetime, bytes sent must not be accessed when a completion may have possibly arrived back (and processed). The race may trigger when a request completion arrives, processed _and_ reused as a fresh new request, exactly in the (relatively short) window between the last data payload sent and before the request iov_iter is advanced. Consider the following race: 1. 16K write request is queued 2. The nvme command and the data is sent to the controller (in-capsule or solicited by r2t) 3. After the last payload is sent but before the req.iter is advanced, the controller sends back a completion. 4. The completion is processed, the request is completed, and reused to transfer a new request (write or read) 5. The new request is queued, and the driver reset the request parameters (nvme_tcp_setup_cmd_pdu). 6. Now context in (2) resumes execution and advances the req.iter ==> use-after-completion as this is already a new request. Fix this by making sure the request is not advanced after the last data payload send, knowing that a completion may have arrived already. An alternative solution would have been to delay the request completion or state change waiting for reference counting on the TX path, but besides adding atomic operations to the hot-path, it may present challenges in multi-stage R2T scenarios where a r2t handler needs to be deferred to an async execution. Reported-by: Narayan Ayalasomayajula <narayan.ayalasomayajula@wdc.com> Tested-by: Anil Mishra <anil.mishra@wdc.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Cc: stable@vger.kernel.org # v5.8+ Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26Revert "serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference"Greg Kroah-Hartman
commit 754f39158441f4c0d7a8255209dd9a939f08ce80 upstream. This reverts commit 32f47179833b63de72427131169809065db6745e. Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not. Upon review, this commit was found to be not be needed at all as the change was useless because this function can only be called when of_match_device matched on something. So it should be reverted. Cc: Aditya Pakki <pakki001@umn.edu> Cc: stable <stable@vger.kernel.org> Fixes: 32f47179833b ("serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference") Acked-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-6-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26rapidio: handle create_workqueue() failureAnirudh Rayabharam
commit 69ce3ae36dcb03cdf416b0862a45369ddbf50fdf upstream. In case create_workqueue() fails, release all resources and return -ENOMEM to caller to avoid potential NULL pointer deref later. Move up the create_workequeue() call to return early and avoid unwinding the call to riocm_rx_fill(). Cc: Alexandre Bounine <alex.bou9@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Link: https://lore.kernel.org/r/20210503115736.2104747-46-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26Revert "rapidio: fix a NULL pointer dereference when create_workqueue() fails"Greg Kroah-Hartman
commit 5e68b86c7b7c059c0f0ec4bf8adabe63f84a61eb upstream. This reverts commit 23015b22e47c5409620b1726a677d69e5cd032ba. Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not. Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change. The original commit has a memory leak on the error path here, it does not clean up everything properly. Cc: Kangjie Lu <kjlu@umn.edu> Cc: Alexandre Bounine <alex.bou9@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Fixes: 23015b22e47c ("rapidio: fix a NULL pointer dereference when create_workqueue() fails") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-45-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26platform/x86: ideapad-laptop: fix method name typoBarnabás Pőcze
commit b09aaa3f2c0edeeed670cd29961a0e35bddc78cf upstream. "smbc" should be "sbmc". `eval_smbc()` incorrectly called the SMBC ACPI method instead of SBMC. This resulted in partial loss of functionality. Rectify that by calling the correct ACPI method (SBMC), and also rename methods and constants. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212985 Fixes: 0b765671cb80 ("platform/x86: ideapad-laptop: group and separate (un)related constants into enums") Fixes: ff36b0d953dc ("platform/x86: ideapad-laptop: rework and create new ACPI helpers") Cc: stable@vger.kernel.org # 5.12 Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Link: https://lore.kernel.org/r/20210507235333.286505-1-pobrn@protonmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26uio_hv_generic: Fix another memory leak in error handling pathsChristophe JAILLET
commit 0b0226be3a52dadd965644bc52a807961c2c26df upstream. Memory allocated by 'vmbus_alloc_ring()' at the beginning of the probe function is never freed in the error handling path. Add the missing 'vmbus_free_ring()' call. Note that it is already freed in the .remove function. Fixes: cdfa835c6e5e ("uio_hv_generic: defer opening vmbus until first use") Cc: stable <stable@vger.kernel.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/0d86027b8eeed8e6360bc3d52bcdb328ff9bdca1.1620544055.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26uio_hv_generic: Fix a memory leak in error handling pathsChristophe JAILLET
commit 3ee098f96b8b6c1a98f7f97915f8873164e6af9d upstream. If 'vmbus_establish_gpadl()' fails, the (recv|send)_gpadl will not be updated and 'hv_uio_cleanup()' in the error handling path will not be able to free the corresponding buffer. In such a case, we need to free the buffer explicitly. Fixes: cdfa835c6e5e ("uio_hv_generic: defer opening vmbus until first use") Cc: stable <stable@vger.kernel.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/4fdaff557deef6f0475d02ba7922ddbaa1ab08a6.1620544055.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26uio/uio_pci_generic: fix return value changed in refactoringMartin Ågren
commit 156ed0215ef365604f2382d5164c36d3a1cfd98f upstream. Commit ef84928cff58 ("uio/uio_pci_generic: use device-managed function equivalents") was able to simplify various error paths thanks to no longer having to clean up on the way out. Some error paths were dropped, others were simplified. In one of those simplifications, the return value was accidentally changed from -ENODEV to -ENOMEM. Restore the old return value. Fixes: ef84928cff58 ("uio/uio_pci_generic: use device-managed function equivalents") Cc: stable <stable@vger.kernel.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Martin Ågren <martin.agren@gmail.com> Link: https://lore.kernel.org/r/20210422192240.1136373-1-martin.agren@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26ALSA: usb-audio: DJM-750: ensure format is setOlivia Mackintosh
commit e7df7df5a3809d733888db6ce6592a644acaac19 upstream. Add case statement to set sample-rate for the DJM-750 Pioneer mixer. This was included as part of another patch but I think it has been archived on Patchwork and hasn't been merged. Signed-off-by: Olivia Mackintosh <livvy@base.nu> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210418165901.25776-1-livvy@base.nu Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26ALSA: usb-audio: Configure Pioneer DJM-850 samplerateNicolas MURE
commit 1a2a94a4392d5d1e5e25cc127573452f4c7fa9b8 upstream. Send an `URB_CONTROL out` USB frame to the device to configure its samplerate. This should be done before using the device for audio streaming (capture or playback). See https://github.com/nm2107/Pioneer-DJM-850-driver-reverse-engineering/blob/172fb9a61055960c88c67b7c416fe5bf3609807b/doc/windows-dvs/framerate-setting/README.md Signed-off-by: Nicolas MURE <nicolas.mure2019@gmail.com> Link: https://lore.kernel.org/r/20210301152729.18094-4-nicolas.mure2019@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26ALSA: hda/realtek: Add fixup for HP Spectre x360 15-df0xxxElia Devito
commit f2be77fee648ddd6d0d259d3527344ba0120e314 upstream. Fixup to enable all 4 speaker on HP Spectre x360 15-df0xxx and probably on similar models. 0x14 pin config override is required to enable all speakers and alc285-speaker2-to-dac1 fixup to enable volume adjustment. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=189331 Signed-off-by: Elia Devito <eliadevito@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210511124651.4802-1-eliadevito@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26ALSA: hda/realtek: Add fixup for HP OMEN laptopTakashi Iwai
commit 5d84b5318d860c9d80ca5dfae0e971ede53b4921 upstream. HP OMEN dc0019-ur with codec SSID 103c:84da requires the pin config overrides and the existing mic/mute LED setup. This patch implements those in the fixup table. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212733 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210504121832.4558-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26ALSA: hda/realtek: Fix silent headphone output on ASUS UX430UATakashi Iwai
commit 8eedd3a70a70f51fa963f3ad7fa97afd0c75bd44 upstream. It was reported that the headphone output on ASUS UX430UA (SSID 1043:1740) with ALC295 codec is silent while the speaker works. After the investigation, it turned out that the DAC assignment has to be fixed on this machine; unlike others, it expects DAC 0x02 to be assigned to the speaker pin 0x07 while DAC 0x03 to headphone pin 0x21. This patch provides a fixup for the fixed DAC/pin mapping for this device. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212933 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210504082057.6913-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26ALSA: hda/realtek: Add some CLOVE SSIDs of ALC293PeiSen Hou
commit 1d5cfca286178ce81fb0c8a5f5777ef123cd69e4 upstream. Fix "use as headset mic, without its own jack detect" problen. Signed-off-by: PeiSen Hou <pshou@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/d0746eaf29f248a5acc30313e3ba4f99@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26ALSA: hda/realtek: reset eapd coeff to default value for alc287Hui Wang
commit 8822702f6e4c8917c83ba79e0ebf2c8c218910d4 upstream. Ubuntu users reported an audio bug on the Lenovo Yoga Slim 7 14IIL05, he installed dual OS (Windows + Linux), if he booted to the Linux from Windows, the Speaker can't work well, it has crackling noise, if he poweroff the machine first after Windows, the Speaker worked well. Before rebooting or shutdown from Windows, the Windows changes the codec eapd coeff value, but the BIOS doesn't re-initialize its value, when booting into the Linux from Windows, the eapd coeff value is not correct. To fix it, set the codec default value to that coeff register in the alsa driver. BugLink: http://bugs.launchpad.net/bugs/1925057 Suggested-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210507024452.8300-1-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26ALSA: firewire-lib: fix check for the size of isochronous packet payloadTakashi Sakamoto
commit 395f41e2cdac63e7581fb9574e5ac0f02556e34a upstream. The check for size of isochronous packet payload just cares of the size of IR context payload without the size of CIP header. Cc: <stable@vger.kernel.org> Fixes: f11453c7cc01 ("ALSA: firewire-lib: use 16 bytes IR context header to separate CIP header") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210513125652.110249-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26Revert "ALSA: sb8: add a check for request_region"Greg Kroah-Hartman
commit 94f88309f201821073f57ae6005caefa61bf7b7e upstream. This reverts commit dcd0feac9bab901d5739de51b3f69840851f8919. Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not. Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change. The original commit message for this change was incorrect as the code path can never result in a NULL dereference, alluding to the fact that whatever tool was used to "find this" is broken. It's just an optional resource reservation, so removing this check is fine. Cc: Kangjie Lu <kjlu@umn.edu> Acked-by: Takashi Iwai <tiwai@suse.de> Fixes: dcd0feac9bab ("ALSA: sb8: add a check for request_region") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-35-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26ALSA: hda: fixup headset for ASUS GU502 laptopDaniel Cordova A
commit c1b55029493879f5bd585ff79f326e71f0bc05e3 upstream. The GU502 requires a few steps to make headset i/o works properly: pincfg, verbs to unmute headphone out and callback to toggle output between speakers and headphone using jack. Signed-off-by: Daniel Cordova A <danesc87@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210507173116.12043-1-danesc87@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 ProTakashi Sakamoto
commit 0edabdfe89581669609eaac5f6a8d0ae6fe95e7f upstream. Mackie d.2 has an extension card for IEEE 1394 communication, which uses BridgeCo DM1000 ASIC. On the other hand, Mackie d.4 Pro has built-in function for IEEE 1394 communication by Oxford Semiconductor OXFW971, according to schematic diagram available in Mackie website. Although I misunderstood that Mackie d.2 Pro would be also a model with OXFW971, it's wrong. Mackie d.2 Pro is a model which includes the extension card as factory settings. This commit fixes entries in Kconfig and comment in ALSA OXFW driver. Cc: <stable@vger.kernel.org> Fixes: fd6f4b0dc167 ("ALSA: bebob: Add skelton for BeBoB based devices") Fixes: ec4dba5053e1 ("ALSA: oxfw: Add support for Behringer/Mackie devices") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210513125652.110249-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26ALSA: usb-audio: Validate MS endpoint descriptorsTakashi Iwai
commit e84749a78dc82bc545f12ce009e3dbcc2c5a8a91 upstream. snd_usbmidi_get_ms_info() may access beyond the border when a malformed descriptor is passed. This patch adds the sanity checks of the given MS endpoint descriptors, and skips invalid ones. Reported-by: syzbot+6bb23a5d5548b93c94aa@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210510150659.17710-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26ALSA: firewire-lib: fix calculation for size of IR context payloadTakashi Sakamoto
commit 1be4f21d9984fa9835fae5411a29465dc5aece6f upstream. The quadlets for CIP header is handled as a part of IR context header, thus it doesn't join in IR context payload. However current calculation includes the quadlets in IR context payload. Cc: <stable@vger.kernel.org> Fixes: f11453c7cc01 ("ALSA: firewire-lib: use 16 bytes IR context header to separate CIP header") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210513125652.110249-5-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26ALSA: dice: fix stream format at middle sampling rate for Alesis iO 26Takashi Sakamoto
commit 1b6604896e78969baffc1b6cc6bc175f95929ac4 upstream. Alesis iO 26 FireWire has two pairs of digital optical interface. It delivers PCM frames from the interfaces by second isochronous packet streaming. Although both of the interfaces are available at 44.1/48.0 kHz, first one of them is only available at 88.2/96.0 kHz. It reduces the number of PCM samples to 4 in Multi Bit Linear Audio data channel of data blocks on the second isochronous packet streaming. This commit fixes hardcoded stream formats. Cc: <stable@vger.kernel.org> Fixes: 28b208f600a3 ("ALSA: dice: add parameters of stream formats for models produced by Alesis") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210513125652.110249-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26ALSA: line6: Fix racy initialization of LINE6 MIDITakashi Iwai
commit 05ca447630334c323c9e2b788b61133ab75d60d3 upstream. The initialization of MIDI devices that are found on some LINE6 drivers are currently done in a racy way; namely, the MIDI buffer instance is allocated and initialized in each private_init callback while the communication with the interface is already started via line6_init_cap_control() call before that point. This may lead to Oops in line6_data_received() when a spurious event is received, as reported by syzkaller. This patch moves the MIDI initialization to line6_init_cap_control() as well instead of the too-lately-called private_init for avoiding the race. Also this reduces slightly more lines, so it's a win-win change. Reported-by: syzbot+0d2b3feb0a2887862e06@syzkallerlkml..appspotmail.com Link: https://lore.kernel.org/r/000000000000a4be9405c28520de@google.com Link: https://lore.kernel.org/r/20210517132725.GA50495@hyeyoo Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210518083939.1927-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26ALSA: firewire-lib: fix amdtp_packet tracepoints event for packet_index fieldTakashi Sakamoto
commit 814b43127f4ac69332e809152e30773941438aff upstream. The snd_firewire_lib:amdtp_packet tracepoints event includes index of packet processed in a context handling. However in IR context, it is not calculated as expected. Cc: <stable@vger.kernel.org> Fixes: 753e717986c2 ("ALSA: firewire-lib: use packet descriptor for IR context") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210513125652.110249-6-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26ALSA: intel8x0: Don't update period unless preparedTakashi Iwai
commit c1f0616124c455c5c762b6f123e40bba5df759e6 upstream. The interrupt handler of intel8x0 calls snd_intel8x0_update() whenever the hardware sets the corresponding status bit for each stream. This works fine for most cases as long as the hardware behaves properly. But when the hardware gives a wrong bit set, this leads to a zero- division Oops, and reportedly, this seems what happened on a VM. For fixing the crash, this patch adds a internal flag indicating that the stream is ready to be updated, and check it (as well as the flag being in suspended) to ignore such spurious update. Cc: <stable@vger.kernel.org> Reported-and-tested-by: Sergey Senozhatsky <senozhatsky@chromium.org> Link: https://lore.kernel.org/r/s5h5yzi7uh0.wl-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26ALSA: dice: fix stream format for TC Electronic Konnekt Live at high ↵Takashi Sakamoto
sampling transfer frequency commit 4c6fe8c547e3c9e8c15dabdd23c569ee0df3adb1 upstream. At high sampling transfer frequency, TC Electronic Konnekt Live transfers/receives 6 audio data frames in multi bit linear audio data channel of data block in CIP payload. Current hard-coded stream format is wrong. Cc: <stable@vger.kernel.org> Fixes: f1f0f330b1d0 ("ALSA: dice: add parameters of stream formats for models produced by TC Electronic") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210518012612.37268-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26misc: eeprom: at24: check suspend status before disable regulatorHsin-Yi Wang
commit 2962484dfef8dbb7f9059822bc26ce8a04d0e47c upstream. cd5676db0574 ("misc: eeprom: at24: support pm_runtime control") disables regulator in runtime suspend. If runtime suspend is called before regulator disable, it will results in regulator unbalanced disabling. Fixes: cd5676db0574 ("misc: eeprom: at24: support pm_runtime control") Cc: stable <stable@vger.kernel.org> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Link: https://lore.kernel.org/r/20210420133050.377209-1-hsinyi@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26fs/mount_setattr: tighten permission checksChristian Brauner
commit 2ca4dcc4909d787ee153272f7efc2bff3b498720 upstream. We currently don't have any filesystems that support idmapped mounts which are mountable inside a user namespace. That was a deliberate decision for now as a userns root can just mount the filesystem themselves. So enforce this restriction explicitly until there's a real use-case for this. This way we can notice it and will have a chance to adapt and audit our translation helpers and fstests appropriately if we need to support such filesystems. Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org CC: linux-fsdevel@vger.kernel.org Suggested-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26cifs: fix memory leak in smb2_copychunk_rangeRonnie Sahlberg
commit d201d7631ca170b038e7f8921120d05eec70d7c5 upstream. When using smb2_copychunk_range() for large ranges we will run through several iterations of a loop calling SMB2_ioctl() but never actually free the returned buffer except for the final iteration. This leads to memory leaks everytime a large copychunk is requested. Fixes: 9bf0c9cd4314 ("CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large files") Cc: <stable@vger.kernel.org> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-12 21:49:30 +0000