summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-16xfs: check log iovec size to make sure it's plausibly a buffer log formatDarrick J. Wong
When log recovery is processing buffer log items, we should check that the incoming iovec actually describes a region of memory large enough to contain the log format and the dirty map. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-01-16xfs: make struct xfs_buf_log_format have a consistent sizeDarrick J. Wong
Increase XFS_BLF_DATAMAP_SIZE by 1 to fill in the implied padding at the end of struct xfs_buf_log_format. This makes the size consistent so that we can check it in xfs_ondisk.h, and will be needed once we start logging attribute values. On amd64 we get the following pahole: struct xfs_buf_log_format { short unsigned int blf_type; /* 0 2 */ short unsigned int blf_size; /* 2 2 */ short unsigned int blf_flags; /* 4 2 */ short unsigned int blf_len; /* 6 2 */ long long int blf_blkno; /* 8 8 */ unsigned int blf_map_size; /* 16 4 */ unsigned int blf_data_map[16]; /* 20 64 */ /* --- cacheline 1 boundary (64 bytes) was 20 bytes ago --- */ /* size: 88, cachelines: 2, members: 7 */ /* padding: 4 */ /* last cacheline: 24 bytes */ }; But on i386 we get the following: struct xfs_buf_log_format { short unsigned int blf_type; /* 0 2 */ short unsigned int blf_size; /* 2 2 */ short unsigned int blf_flags; /* 4 2 */ short unsigned int blf_len; /* 6 2 */ long long int blf_blkno; /* 8 8 */ unsigned int blf_map_size; /* 16 4 */ unsigned int blf_data_map[16]; /* 20 64 */ /* --- cacheline 1 boundary (64 bytes) was 20 bytes ago --- */ /* size: 84, cachelines: 2, members: 7 */ /* last cacheline: 20 bytes */ }; Notice how the amd64 compiler inserts 4 bytes of padding to the end of the structure to ensure 8-byte alignment. Prior to "xfs: fix memory corruption during remote attr value buffer invalidation" we would try to write to blf_data_map[17], which is harmless on amd64 but really bad on i386. This shouldn't cause any changes in the ondisk logging formats because the log code writes out the log vectors with the appropriate size for the log item's map_size, and log recovery treats the data_map array as a VLA. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-01-16xfs: complain if anyone tries to create a too-large buffer log itemDarrick J. Wong
Complain if someone calls xfs_buf_item_init on a buffer that is larger than the dirty bitmap can handle, or tries to log a region that's past the end of the dirty bitmap. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-01-16xfs: clean up xfs_buf_item_get_format return valueDarrick J. Wong
The only thing that can cause a nonzero return from xfs_buf_item_get_format is if the kmem_alloc fails, which it can't. Get rid of all the unnecessary error handling. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-01-16xfs: streamline xfs_attr3_leaf_inactiveDarrick J. Wong
Now that we know we don't have to take a transaction to stale the incore buffers for a remote value, get rid of the unnecessary memory allocation in the leaf walker and call the rmt_stale function directly. Flatten the loop while we're at it. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-01-16xfs: fix memory corruption during remote attr value buffer invalidationDarrick J. Wong
While running generic/103, I observed what looks like memory corruption and (with slub debugging turned on) a slub redzone warning on i386 when inactivating an inode with a 64k remote attr value. On a v5 filesystem, maximally sized remote attr values require one block more than 64k worth of space to hold both the remote attribute value header (64 bytes). On a 4k block filesystem this results in a 68k buffer; on a 64k block filesystem, this would be a 128k buffer. Note that even though we'll never use more than 65,600 bytes of this buffer, XFS_MAX_BLOCKSIZE is 64k. This is a problem because the definition of struct xfs_buf_log_format allows for XFS_MAX_BLOCKSIZE worth of dirty bitmap (64k). On i386 when we invalidate a remote attribute, xfs_trans_binval zeroes all 68k worth of the dirty map, writing right off the end of the log item and corrupting memory. We've gotten away with this on x86_64 for years because the compiler inserts a u32 padding on the end of struct xfs_buf_log_format. Fortunately for us, remote attribute values are written to disk with xfs_bwrite(), which is to say that they are not logged. Fix the problem by removing all places where we could end up creating a buffer log item for a remote attribute value and leave a note explaining why. Next, replace the open-coded buffer invalidation with a call to the helper we created in the previous patch that does better checking for bad metadata before marking the buffer stale. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-01-16xfs: refactor remote attr value buffer invalidationDarrick J. Wong
Hoist the code that invalidates remote extended attribute value buffers into a separate helper function. This prepares us for a memory corruption fix in the next patch. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-01-15xfs: fix IOCB_NOWAIT handling in xfs_file_dio_aio_readChristoph Hellwig
Direct I/O reads can also be used with RWF_NOWAIT & co. Fix the inode locking in xfs_file_dio_aio_read to take IOCB_NOWAIT into account. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-01-15xfs: Add __packed to xfs_dir2_sf_entry_t definitionxfs-5.6-merge-4Vincenzo Frascino
xfs_check_ondisk_structs() verifies that the sizes of the data types used by xfs are correct via the XFS_CHECK_STRUCT_SIZE() macro. Since the structures padding can vary depending on the ABI (e.g. on ARM OABI structures are padded to multiple of 32 bits), it may happen that xfs_dir2_sf_entry_t size check breaks the compilation with the assertion below: In file included from linux/include/linux/string.h:6, from linux/include/linux/uuid.h:12, from linux/fs/xfs/xfs_linux.h:10, from linux/fs/xfs/xfs.h:22, from linux/fs/xfs/xfs_super.c:7: In function ‘xfs_check_ondisk_structs’, inlined from ‘init_xfs_fs’ at linux/fs/xfs/xfs_super.c:2025:2: linux/include/linux/compiler.h:350:38: error: call to ‘__compiletime_assert_107’ declared with attribute error: XFS: sizeof(xfs_dir2_sf_entry_t) is wrong, expected 3 _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__) Restore the correct behavior adding __packed to the structure definition. Cc: Darrick J. Wong <darrick.wong@oracle.com> Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-01-14xfs: fix s_maxbytes computation on 32-bit kernelsDarrick J. Wong
I observed a hang in generic/308 while running fstests on a i686 kernel. The hang occurred when trying to purge the pagecache on a large sparse file that had a page created past MAX_LFS_FILESIZE, which caused an integer overflow in the pagecache xarray and resulted in an infinite loop. I then noticed that Linus changed the definition of MAX_LFS_FILESIZE in commit 0cc3b0ec23ce ("Clarify (and fix) MAX_LFS_FILESIZE macros") so that it is now one page short of the maximum page index on 32-bit kernels. Because the XFS function to compute max offset open-codes the 2005-era MAX_LFS_FILESIZE computation and neither the vfs nor mm perform any sanity checking of s_maxbytes, the code in generic/308 can create a page above the pagecache's limit and kaboom. Fix all this by setting s_maxbytes to MAX_LFS_FILESIZE directly and aborting the mount with a warning if our assumptions ever break. I have no answer for why this seems to have been broken for years and nobody noticed. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-01-14xfs: truncate should remove all blocks, not just to the end of the page cacheDarrick J. Wong
xfs_itruncate_extents_flags() is supposed to unmap every block in a file from EOF onwards. Oddly, it uses s_maxbytes as the upper limit to the bunmapi range, even though s_maxbytes reflects the highest offset the pagecache can support, not the highest offset that XFS supports. The result of this confusion is that if you create a 20T file on a 64-bit machine, mount the filesystem on a 32-bit machine, and remove the file, we leak everything above 16T. Fix this by capping the bunmapi request at the maximum possible block offset, not s_maxbytes. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-01-14xfs: introduce XFS_MAX_FILEOFFDarrick J. Wong
Introduce a new #define for the maximum supported file block offset. We'll use this in the next patch to make it more obvious that we're doing some operation for all possible inode fork mappings after a given offset. We can't use ULLONG_MAX here because bunmapi uses that to detect when it's done. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-01-09xfs: remove bogus assertion when online repair isn't enabledxfs-5.6-merge-3Darrick J. Wong
We don't need to assert on !REPAIR in the stub version of xrep_calc_ag_resblks that is called when online repair hasn't been compiled into the kernel because none of the repair code will ever run. Reported-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-01-09xfs: Remove all strlen in all xfs_attr_* functions for attr names.Allison Henderson
This helps to pre-simplify the extra handling of the null terminator in delayed operations which use memcpy rather than strlen. Later when we introduce parent pointers, attribute names will become binary, so strlen will not work at all. Removing uses of strlen now will help reduce complexities later Signed-off-by: Allison Collins <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-01-09xfs: fix misuse of the XFS_ATTR_INCOMPLETE flagChristoph Hellwig
XFS_ATTR_INCOMPLETE is a flag in the on-disk attribute format, and thus in a different namespace as the ATTR_* flags in xfs_da_args.flags. Switch to using a XFS_DA_OP_INCOMPLETE flag in op_flags instead. Without this users might be able to inject this flag into operations using the attr by handle ioctl. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-01-09xfs: also remove cached ACLs when removing the underlying attrChristoph Hellwig
We should not just invalidate the ACL when setting the underlying attribute, but also when removing it. The ioctl interface gets that right, but the normal xattr inteface skipped the xfs_forget_acl due to an early return. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-01-09xfs: reject invalid flags combinations in XFS_IOC_ATTRMULTI_BY_HANDLEChristoph Hellwig
While the flags field in the ABI and the on-disk format allows for multiple namespace flags, that is a logically invalid combination that scrub complains about. Reject it at the ioctl level, as all other interface already get this right at higher levels. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-01-09xfs: clear kernel only flags in XFS_IOC_ATTRMULTI_BY_HANDLEChristoph Hellwig
Don't allow passing arbitrary flags as they change behavior including memory allocation that the call stack is not prepared for. Fixes: ddbca70cc45c ("xfs: allocate xattr buffer on demand") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-01-07xfs: remove shadow variable in xfs_btree_lshiftxfs-5.6-merge-2Eric Sandeen
Sparse warns about a shadow variable in this function after the Fixed: commit added another int i; with larger scope. It's safe to remove the one with the smaller scope to fix this shadow, although the shadow itself is harmless. Fixes: 2c813ad66a72 ("xfs: support btrees with overlapping intervals for keys") Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-01-06xfs: quota: move to time64_t interfacesArnd Bergmann
As a preparation for removing the 32-bit time_t type and all associated interfaces, change xfs to use time64_t and ktime_get_real_seconds() for the quota housekeeping. This avoids one difference between 32-bit and 64-bit kernels, raising the theoretical limit for the quota grace period to year 2106 on 32-bit instead of year 2038. Note that common user space tools using the XFS quotactl interface instead of the generic one still use the y2038 dates. To fix quotas properly, both the on-disk format and user space still need to be changed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-01-06xfs: rename compat_time_t to old_time32_tArnd Bergmann
The compat_time_t type has been removed everywhere else, as most users rely on old_time32_t for both native and compat mode handling of 32-bit time_t. Remove the last one in xfs. Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-12-29Linux 5.5-rc4v5.5-rc4Linus Torvalds
2019-12-29Merge tag 'riscv/for-v5.5-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "One important fix for RISC-V: - Redirect any incoming syscall with an ID less than -1 to sys_ni_syscall, rather than allowing them to fall through into the syscall handler. and two minor build fixes: - Export __asm_copy_{from,to}_user() from where they are defined. This fixes a build error triggered by some randconfigs. - Export flush_icache_all(). I'd resisted this before, since historically we didn't want modules to be able to flush the I$ directly; but apparently everyone else is doing it now" * tag 'riscv/for-v5.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: export flush_icache_all to modules riscv: reject invalid syscalls below -1 riscv: fix compile failure with EXPORT_SYMBOL() & !MMU
2019-12-29Merge tag 'locks-v5.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux Pull /proc/locks formatting fix from Jeff Layton: "This is a trivial fix for a _very_ long standing bug in /proc/locks formatting. Ordinarily, I'd wait for the merge window for something like this, but it is making it difficult to validate some overlayfs fixes. I've also gone ahead and marked this for stable" * tag 'locks-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: locks: print unsigned ino in /proc/locks
2019-12-29Merge tag '5.5-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "One performance fix for large directory searches, and one minor style cleanup noticed by Clang" * tag '5.5-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Optimize readdir on reparse points cifs: Adjust indentation in smb2_open_file
2019-12-29locks: print unsigned ino in /proc/locksAmir Goldstein
An ino is unsigned, so display it as such in /proc/locks. Cc: stable@vger.kernel.org Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jeff Layton <jlayton@kernel.org>
2019-12-27riscv: export flush_icache_all to modulesOlof Johansson
This is needed by LKDTM (crash dump test module), it calls flush_icache_range(), which on RISC-V turns into flush_icache_all(). On other architectures, the actual implementation is exported, so follow that precedence and export it here too. Fixes build of CONFIG_LKDTM that fails with: ERROR: "flush_icache_all" [drivers/misc/lkdtm/lkdtm.ko] undefined! Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-27riscv: reject invalid syscalls below -1David Abdurachmanov
Running "stress-ng --enosys 4 -t 20 -v" showed a large number of kernel oops with "Unable to handle kernel paging request at virtual address" message. This happens when enosys stressor starts testing random non-valid syscalls. I forgot to redirect any syscall below -1 to sys_ni_syscall. With the patch kernel oops messages are gone while running stress-ng enosys stressor. Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Fixes: 5340627e3fe0 ("riscv: add support for SECCOMP and SECCOMP_FILTER") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-27riscv: fix compile failure with EXPORT_SYMBOL() & !MMULuc Van Oostenryck
When support for !MMU was added, the declaration of __asm_copy_to_user() & __asm_copy_from_user() were #ifdefed out hence their EXPORT_SYMBOL() give an error message like: .../riscv_ksyms.c:13:15: error: '__asm_copy_to_user' undeclared here .../riscv_ksyms.c:14:15: error: '__asm_copy_from_user' undeclared here Since these symbols are not defined with !MMU it's wrong to export them. Same for __clear_user() (even though this one is also declared in include/asm-generic/uaccess.h and thus doesn't give an error message). Fix this by doing the EXPORT_SYMBOL() directly where these symbols are defined: inside lib/uaccess.S itself. Fixes: 6bd33e1ece52 ("riscv: fix compile failure with EXPORT_SYMBOL() & !MMU") Reported-by: kbuild test robot <lkp@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-27Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four fixes and one spelling update, all in drivers: two in lpfc and the rest in mp3sas, cxgbi and target" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target/iblock: Fix protection error with blocks greater than 512B scsi: libcxgbi: fix NULL pointer dereference in cxgbi_device_destroy() scsi: lpfc: fix spelling mistakes of asynchronous scsi: lpfc: fix build failure with DEBUGFS disabled scsi: mpt3sas: Fix double free in attach error handling
2019-12-27Merge tag 'drm-fixes-2019-12-28' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Post-xmas food coma recovery fixes. Only three fixes for i915 since I expect most people are holidaying. i915: - power management rc6 fix - framebuffer tracking fix - display power management ratelimit fix" * tag 'drm-fixes-2019-12-28' of git://anongit.freedesktop.org/drm/drm: drm/i915: Hold reference to intel_frontbuffer as we track activity drm/i915/gt: Ratelimit display power w/a drm/i915/pmu: Ensure monotonic rc6
2019-12-27Merge tag 'linux-kselftest-5.5-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: - rseq build failures fixes related to glibc 2.30 compatibility from Mathieu Desnoyers - Kunit fixes and cleanups from SeongJae Park - Fixes to filesystems/epoll, firmware, and livepatch build failures and skip handling. * tag 'linux-kselftest-5.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: rseq/selftests: Clarify rseq_prepare_unload() helper requirements rseq/selftests: Fix: Namespace gettid() for compatibility with glibc 2.30 rseq/selftests: Turn off timeout setting kunit/kunit_tool_test: Test '--build_dir' option run kunit: Rename 'kunitconfig' to '.kunitconfig' kunit: Place 'test.log' under the 'build_dir' kunit: Create default config in '--build_dir' kunit: Remove duplicated defconfig creation docs/kunit/start: Use in-tree 'kunit_defconfig' selftests: livepatch: Fix it to do root uid check and skip selftests: firmware: Fix it to do root uid check and skip selftests: filesystems/epoll: fix build error
2019-12-27Merge tag 'pm-5.5-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Fix compile test of the Tegra devfreq driver (Arnd Bergmann) and remove redundant Kconfig dependencies from multiple devfreq drivers (Leonard Crestez)" * tag 'pm-5.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / devfreq: tegra: Add COMMON_CLK dependency PM / devfreq: Drop explicit selection of PM_OPP
2019-12-27Merge tag 'io_uring-5.5-20191226' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: - Removal of now unused busy wqe list (Hillf) - Add cond_resched() to io-wq work processing (Hillf) - And then the series that I hinted at from last week, which removes the sqe from the io_kiocb and keeps all sqe handling on the prep side. This guarantees that an opcode can't do the wrong thing and read the sqe more than once. This is unchanged from last week, no issues have been observed with this in testing. Hence I really think we should fold this into 5.5. * tag 'io_uring-5.5-20191226' of git://git.kernel.dk/linux-block: io-wq: add cond_resched() to worker thread io-wq: remove unused busy list from io_sqe io_uring: pass in 'sqe' to the prep handlers io_uring: standardize the prep methods io_uring: read 'count' for IORING_OP_TIMEOUT in prep handler io_uring: move all prep state for IORING_OP_{SEND,RECV}_MGS to prep handler io_uring: move all prep state for IORING_OP_CONNECT to prep handler io_uring: add and use struct io_rw for read/writes io_uring: use u64_to_user_ptr() consistently
2019-12-27Merge tag 'libata-5.5-20191226' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull libata fixes from Jens Axboe: "Two things in here: - First half of a series that fixes ahci_brcm, also marked for stable. The other part of the series is going into 5.6 (Florian) - sata_nv regression fix that is also marked for stable (Sascha)" * tag 'libata-5.5-20191226' of git://git.kernel.dk/linux-block: ata: ahci_brcm: Add missing clock management during recovery ata: ahci_brcm: BCM7425 AHCI requires AHCI_HFLAG_DELAY_ENGINE ata: ahci_brcm: Fix AHCI resources management ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys() libata: Fix retrieving of active qcs
2019-12-27Merge tag 'block-5.5-20191226' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Only thing here are the changes from Arnd from last week, which now have the appropriate header include to ensure they actually compile if COMPAT is enabled" * tag 'block-5.5-20191226' of git://git.kernel.dk/linux-block: compat_ioctl: block: handle Persistent Reservations compat_ioctl: block: handle add zone open, close and finish ioctl compat_ioctl: block: handle BLKGETZONESZ/BLKGETNRZONES compat_ioctl: block: handle BLKREPORTZONE/BLKRESETZONE pktcdvd: fix regression on 64-bit architectures
2019-12-27Merge tag 'gpio-v5.5-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "A set of fixes for the v5.5 series: - Fix the build for the Xtensa driver. - Make sure to set up the parent device for mpc8xxx. - Clarify the look-up error message. - Fix the usage of the line direction in the mockup device. - Fix a type warning on the Aspeed driver. - Remove the pointless __exit annotation on the xgs-iproc which is causing a compilation problem. - Fix up emultation of open drain outputs .get_direction() - Fix the IRQ callbacks on the PCA953xx to use bitops and work properly. - Fix the Kconfig on the Tegra driver" * tag 'gpio-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tegra186: Allow building on Tegra194-only configurations gpio: pca953x: Switch to bitops in IRQ callbacks gpiolib: fix up emulated open drain outputs MAINTAINERS: Append missed file to the database gpio: xgs-iproc: remove __exit annotation for iproc_gpio_remove gpio: aspeed: avoid return type warning gpio: mockup: Fix usage of new GPIO_LINE_DIRECTION gpio: Fix error message on out-of-range GPIO in lookup table gpio: mpc8xxx: Add platform device to gpiochip->parent gpio: xtensa: fix driver build
2019-12-27Merge tag 'drm-intel-fixes-2019-12-23' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes i915 power and frontbuffer tracking fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87r20vdlrs.fsf@intel.com
2019-12-25ata: ahci_brcm: Add missing clock management during recoverylibata-5.5-20191226Florian Fainelli
The downstream implementation of ahci_brcm.c did contain clock management recovery, but until recently, did that outside of the libahci_platform helpers and this was unintentionally stripped out while forward porting the patch upstream. Add the missing clock management during recovery and sleep for 10 milliseconds per the design team recommendations to ensure the SATA PHY controller and AFE have been fully quiesced. Fixes: eb73390ae241 ("ata: ahci_brcm: Recover from failures to identify devices") Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25ata: ahci_brcm: BCM7425 AHCI requires AHCI_HFLAG_DELAY_ENGINEFlorian Fainelli
Set AHCI_HFLAG_DELAY_ENGINE for the BCM7425 AHCI controller thus making it conforming to the 'strict' AHCI implementation which this controller is based on. This solves long link establishment with specific hard drives (e.g.: Seagate ST1000VM002-9ZL1 SC12) that would otherwise have to complete the error recovery handling before finally establishing a succesful SATA link at the desired speed. We re-order the hpriv->flags assignment to also remove the NONCQ quirk since we can set the flag directly. Fixes: 9586114cf1e9 ("ata: ahci_brcmstb: add support MIPS-based platforms") Fixes: 423be77daabe ("ata: ahci_brcmstb: add quirk for broken ncq") Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25ata: ahci_brcm: Fix AHCI resources managementFlorian Fainelli
The AHCI resources management within ahci_brcm.c is a little convoluted, largely because it historically had a dedicated clock that was managed within this file in the downstream tree. Once brough upstream though, the clock was left to be managed by libahci_platform.c which is entirely appropriate. This patch series ensures that the AHCI resources are fetched and enabled before any register access is done, thus avoiding bus errors on platforms which clock gate the controller by default. As a result we need to re-arrange the suspend() and resume() functions in order to avoid accessing registers after the clocks have been turned off respectively before the clocks have been turned on. Finally, we can refactor brcm_ahci_get_portmask() in order to fetch the number of ports from hpriv->mmio which is now accessible without jumping through hoops like we used to do. The commit pointed in the Fixes tag is both old and new enough not to require major headaches for backporting of this patch. Fixes: eba68f829794 ("ata: ahci_brcmstb: rename to support across Broadcom SoC's") Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()Florian Fainelli
This reverts commit 6bb86fefa086faba7b60bb452300b76a47cde1a5 ("libahci_platform: Staticize ahci_platform_<en/dis>able_phys()") we are going to need ahci_platform_{enable,disable}_phys() in a subsequent commit for ahci_brcm.c in order to properly control the PHY initialization order. Also make sure the function prototypes are declared in include/linux/ahci_platform.h as a result. Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25libata: Fix retrieving of active qcsSascha Hauer
ata_qc_complete_multiple() is called with a mask of the still active tags. mv_sata doesn't have this information directly and instead calculates the still active tags from the started tags (ap->qc_active) and the finished tags as (ap->qc_active ^ done_mask) Since 28361c40368 the hw_tag and tag are no longer the same and the equation is no longer valid. In ata_exec_internal_sg() ap->qc_active is initialized as 1ULL << ATA_TAG_INTERNAL, but in hardware tag 0 is started and this will be in done_mask on completion. ap->qc_active ^ done_mask becomes 0x100000000 ^ 0x1 = 0x100000001 and thus tag 0 used as the internal tag will never be reported as completed. This is fixed by introducing ata_qc_get_active() which returns the active hardware tags and calling it where appropriate. This is tested on mv_sata, but sata_fsl and sata_nv suffer from the same problem. There is another case in sata_nv that most likely needs fixing as well, but this looks a little different, so I wasn't confident enough to change that. Fixes: 28361c403683 ("libata: add extra internal command") Cc: stable@vger.kernel.org Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Add missing export of ata_qc_get_active(), as per Pali. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25Merge tag 'devfreq-fixes-for-5.5-rc4' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux Pull devfreq fixes for 5.5-rc4 from Chanwoo Choi: "1. Fix the build error of tegra*-devfreq.c when COMPILE_TEST is enabled. 2. Drop unneeded PM_OPP dependency from each driver in Kconfig." * tag 'devfreq-fixes-for-5.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: PM / devfreq: tegra: Add COMMON_CLK dependency PM / devfreq: Drop explicit selection of PM_OPP
2019-12-24io-wq: add cond_resched() to worker threadio_uring-5.5-20191226Hillf Danton
Reschedule the current IO worker to cut the risk that it is becoming a cpu hog. Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-23rseq/selftests: Clarify rseq_prepare_unload() helper requirementsMathieu Desnoyers
The rseq.h UAPI now documents that the rseq_cs field must be cleared before reclaiming memory that contains the targeted struct rseq_cs, but also that the rseq_cs field must be cleared before reclaiming memory of the code pointed to by the rseq_cs start_ip and post_commit_offset fields. While we can expect that use of dlclose(3) will typically unmap both struct rseq_cs and its associated code at once, nothing would theoretically prevent a JIT from reclaiming the code without reclaiming the struct rseq_cs, which would erroneously allow the kernel to consider new code which is not a rseq critical section as a rseq critical section following a code reclaim. Suggested-by: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Florian Weimer <fw@deneb.enyo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "Paul E. McKenney" <paulmck@linux.ibm.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Paul Turner <pjt@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-23rseq/selftests: Fix: Namespace gettid() for compatibility with glibc 2.30Mathieu Desnoyers
glibc 2.30 introduces gettid() in public headers, which clashes with the internal static definition within rseq selftests. Rename gettid() to rseq_gettid() to eliminate this symbol name clash. Reported-by: Tommi T. Rantala <tommi.t.rantala@nokia.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Tommi T. Rantala <tommi.t.rantala@nokia.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "Paul E. McKenney" <paulmck@linux.ibm.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Paul Turner <pjt@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> # v4.18+ Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-23rseq/selftests: Turn off timeout settingMathieu Desnoyers
As the rseq selftests can run for a long period of time, disable the timeout that the general selftests have. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "Paul E. McKenney" <paulmck@linux.ibm.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Paul Turner <pjt@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-23kunit/kunit_tool_test: Test '--build_dir' option runSeongJae Park
This commit adds kunit tool test for the '--build_dir' option. Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Tested-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-23kunit: Rename 'kunitconfig' to '.kunitconfig'SeongJae Park
This commit renames 'kunitconfig' to '.kunitconfig' so that it can be automatically ignored by git and do not disturb people who want to type 'kernel/' by pressing only the 'k' and then 'tab' key. Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Tested-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-09 07:48:17 +0000