summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-08-13scsi: libsas: fix a race condition when smp task timeoutJason Yan
commit b90cd6f2b905905fb42671009dc0e27c310a16ae upstream. When the lldd is processing the complete sas task in interrupt and set the task stat as SAS_TASK_STATE_DONE, the smp timeout timer is able to be triggered at the same time. And smp_task_timedout() will complete the task wheter the SAS_TASK_STATE_DONE is set or not. Then the sas task may freed before lldd end the interrupt process. Thus a use-after-free will happen. Fix this by calling the complete() only when SAS_TASK_STATE_DONE is not set. And remove the check of the return value of the del_timer(). Once the LLDD sets DONE, it must call task->done(), which will call smp_task_done()->complete() and the task will be completed and freed correctly. Reported-by: chenxiang <chenxiang66@hisilicon.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> CC: Hannes Reinecke <hare@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13netfilter: ctnetlink: don't use conntrack/expect object addresses as idFlorian Westphal
commit 3c79107631db1f7fd32cf3f7368e4672004a3010 upstream. else, we leak the addresses to userspace via ctnetlink events and dumps. Compute an ID on demand based on the immutable parts of nf_conn struct. Another advantage compared to using an address is that there is no immediate re-use of the same ID in case the conntrack entry is freed and reallocated again immediately. Fixes: 3583240249ef ("[NETFILTER]: nf_conntrack_expect: kill unique ID") Fixes: 7f85f914721f ("[NETFILTER]: nf_conntrack: kill unique ID") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> [bwh: Backported to 3.16: - Include <net/netns/hash.h> in nf_conntrack_core.c - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13inet: switch IP ID generator to siphashEric Dumazet
commit df453700e8d81b1bdafdf684365ee2b9431fb702 upstream. According to Amit Klein and Benny Pinkas, IP ID generation is too weak and might be used by attackers. Even with recent net_hash_mix() fix (netns: provide pure entropy for net_hash_mix()) having 64bit key and Jenkins hash is risky. It is time to switch to siphash and its 128bit keys. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Amit Klein <aksecurity@gmail.com> Reported-by: Benny Pinkas <benny@pinkas.net> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13siphash: add cryptographically secure PRFJason A. Donenfeld
commit 2c956a60778cbb6a27e0c7a8a52a91378c90e1d1 upstream. SipHash is a 64-bit keyed hash function that is actually a cryptographically secure PRF, like HMAC. Except SipHash is super fast, and is meant to be used as a hashtable keyed lookup function, or as a general PRF for short input use cases, such as sequence numbers or RNG chaining. For the first usage: There are a variety of attacks known as "hashtable poisoning" in which an attacker forms some data such that the hash of that data will be the same, and then preceeds to fill up all entries of a hashbucket. This is a realistic and well-known denial-of-service vector. Currently hashtables use jhash, which is fast but not secure, and some kind of rotating key scheme (or none at all, which isn't good). SipHash is meant as a replacement for jhash in these cases. There are a modicum of places in the kernel that are vulnerable to hashtable poisoning attacks, either via userspace vectors or network vectors, and there's not a reliable mechanism inside the kernel at the moment to fix it. The first step toward fixing these issues is actually getting a secure primitive into the kernel for developers to use. Then we can, bit by bit, port things over to it as deemed appropriate. While SipHash is extremely fast for a cryptographically secure function, it is likely a bit slower than the insecure jhash, and so replacements will be evaluated on a case-by-case basis based on whether or not the difference in speed is negligible and whether or not the current jhash usage poses a real security risk. For the second usage: A few places in the kernel are using MD5 or SHA1 for creating secure sequence numbers, syn cookies, port numbers, or fast random numbers. SipHash is a faster and more fitting, and more secure replacement for MD5 in those situations. Replacing MD5 and SHA1 with SipHash for these uses is obvious and straight-forward, and so is submitted along with this patch series. There shouldn't be much of a debate over its efficacy. Dozens of languages are already using this internally for their hash tables and PRFs. Some of the BSDs already use this in their kernels. SipHash is a widely known high-speed solution to a widely known set of problems, and it's time we catch-up. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: David Laight <David.Laight@aculab.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13ipv6: hash net ptr into fragmentation bucket selectionHannes Frederic Sowa
commit 5a352dd0a3aac03b443c94828dfd7144261c8636 upstream. As namespaces are sometimes used with overlapping ip address ranges, we should also use the namespace as input to the hash to select the ip fragmentation counter bucket. Cc: Eric Dumazet <edumazet@google.com> Cc: Flavio Leitner <fbl@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13ipv4: ip_tunnel: use net namespace from rtable not socketHannes Frederic Sowa
commit 926a882f6916fd76b6f8ee858d45a2241c5e7999 upstream. The socket parameter might legally be NULL, thus sock_net is sometimes causing a NULL pointer dereference. Using net_device pointer in dst_entry is more reliable. Fixes: b6a7719aedd7e5c ("ipv4: hash net ptr into fragmentation bucket selection") Reported-by: Rick Jones <rick.jones2@hp.com> Cc: Rick Jones <rick.jones2@hp.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13ipv4: hash net ptr into fragmentation bucket selectionHannes Frederic Sowa
commit b6a7719aedd7e5c0f2df7641aa47386111682df4 upstream. As namespaces are sometimes used with overlapping ip address ranges, we should also use the namespace as input to the hash to select the ip fragmentation counter bucket. Cc: Eric Dumazet <edumazet@google.com> Cc: Flavio Leitner <fbl@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13ipv6: call ipv6_proxy_select_ident instead of ipv6_select_ident in ↵Sabrina Dubroca
udp6_ufo_fragment commit 8e199dfd82ee097b522b00344af6448715d8ee0c upstream. Matt Grant reported frequent crashes in ipv6_select_ident when udp6_ufo_fragment is called from openvswitch on a skb that doesn't have a dst_entry set. ipv6_proxy_select_ident generates the frag_id without using the dst associated with the skb. This approach was suggested by Vladislav Yasevich. Fixes: 0508c07f5e0c ("ipv6: Select fragment id during UFO segmentation if not set.") Cc: Vladislav Yasevich <vyasevic@redhat.com> Reported-by: Matt Grant <matt@mattgrant.net.nz> Tested-by: Matt Grant <matt@mattgrant.net.nz> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13ipv6: Make __ipv6_select_ident staticVlad Yasevich
commit 8381eacf5c3b35cf7755f4bc521c4d56d24c1cd9 upstream. Make __ipv6_select_ident() static as it isn't used outside the file. Fixes: 0508c07f5e0c9 (ipv6: Select fragment id during UFO segmentation if not set.) Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13ipv6: Fix fragment id assignment on LE arches.Vlad Yasevich
commit 51f30770e50eb787200f30a79105e2615b379334 upstream. Recent commit: 0508c07f5e0c94f38afd5434e8b2a55b84553077 Author: Vlad Yasevich <vyasevich@gmail.com> Date: Tue Feb 3 16:36:15 2015 -0500 ipv6: Select fragment id during UFO segmentation if not set. Introduced a bug on LE in how ipv6 fragment id is assigned. This was cought by nightly sparce check: Resolve the following sparce error: net/ipv6/output_core.c:57:38: sparse: incorrect type in assignment (different base types) net/ipv6/output_core.c:57:38: expected restricted __be32 [usertype] ip6_frag_id net/ipv6/output_core.c:57:38: got unsigned int [unsigned] [assigned] [usertype] id Fixes: 0508c07f5e0c9 (ipv6: Select fragment id during UFO segmentation if not set.) Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13Revert "drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets"Vlad Yasevich
commit 72f6510745592c87f612f62ae4f16bb002934df4 upstream. This reverts commit 5188cd44c55db3e92cd9e77a40b5baa7ed4340f7. Now that GSO layer can track if fragment id has been selected and can allocate one if necessary, we don't need to do this in tap and macvtap. This reverts most of the code and only keeps the new ipv6 fragment id generation function that is still needed. Fixes: 3d0ad09412ff (drivers/net: Disable UFO through virtio) Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13ipv6: Select fragment id during UFO segmentation if not set.Vlad Yasevich
commit 0508c07f5e0c94f38afd5434e8b2a55b84553077 upstream. If the IPv6 fragment id has not been set and we perform fragmentation due to UFO, select a new fragment id. We now consider a fragment id of 0 as unset and if id selection process returns 0 (after all the pertrubations), we set it to 0x80000000, thus giving us ample space not to create collisions with the next packet we may have to fragment. When doing UFO integrity checking, we also select the fragment id if it has not be set yet. This is stored into the skb_shinfo() thus allowing UFO to function correclty. This patch also removes duplicate fragment id generation code and moves ipv6_select_ident() into the header as it may be used during GSO. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13Revert "inet: update the IP ID generation algorithm to higher standards."Ben Hutchings
This reverts commit 8b197d3ce585d6777197e0633d71e5af7d98cb35, which was a stable-specific improvement to IP ID selection. I will apply the upstream changes instead. Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13xen: let alloc_xenballooned_pages() fail if not enough memory freeJuergen Gross
commit a1078e821b605813b63bf6bca414a85f804d5c66 upstream. Instead of trying to allocate pages with GFP_USER in add_ballooned_pages() check the available free memory via si_mem_available(). GFP_USER is far less limiting memory exhaustion than the test via si_mem_available(). This will avoid dom0 running out of memory due to excessive foreign page mappings especially on ARM and on x86 in PVH mode, as those don't have a pre-ballooned area which can be used for foreign mappings. As the normal ballooning suffers from the same problem don't balloon down more than si_mem_available() pages in one iteration. At the same time limit the default maximum number of retries. This is part of XSA-300. Signed-off-by: Juergen Gross <jgross@suse.com> [bwh: Backported to 3.16: adjust context, indentation] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13mm/page_alloc.c: calculate 'available' memory in a separate functionIgor Redko
commit d02bd27bd33dd7e8d22594cd568b81be0cb584cd upstream. Add a new field, VIRTIO_BALLOON_S_AVAIL, to virtio_balloon memory statistics protocol, corresponding to 'Available' in /proc/meminfo. It indicates to the hypervisor how big the balloon can be inflated without pushing the guest system to swap. This metric would be very useful in VM orchestration software to improve memory management of different VMs under overcommit. This patch (of 2): Factor out calculation of the available memory counter into a separate exportable function, in order to be able to use it in other parts of the kernel. In particular, it appears a relevant metric to report to the hypervisor via virtio-balloon statistics interface (in a followup patch). Signed-off-by: Igor Redko <redkoi@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.16 as dependency of commit a1078e821b60 "xen: let alloc_xenballooned_pages() fail if not enough memory free"] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13proc: meminfo: estimate available memory more conservativelyJohannes Weiner
commit 84ad5802a33a4964a49b8f7d24d80a214a096b19 upstream. The MemAvailable item in /proc/meminfo is to give users a hint of how much memory is allocatable without causing swapping, so it excludes the zones' low watermarks as unavailable to userspace. However, for a userspace allocation, kswapd will actually reclaim until the free pages hit a combination of the high watermark and the page allocator's lowmem protection that keeps a certain amount of DMA and DMA32 memory from userspace as well. Subtract the full amount we know to be unavailable to userspace from the number of free pages when calculating MemAvailable. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13floppy: fix out-of-bounds read in copy_bufferDenis Efremov
commit da99466ac243f15fbba65bd261bfc75ffa1532b6 upstream. This fixes a global out-of-bounds read access in the copy_buffer function of the floppy driver. The FDDEFPRM ioctl allows one to set the geometry of a disk. The sect and head fields (unsigned int) of the floppy_drive structure are used to compute the max_sector (int) in the make_raw_rw_request function. It is possible to overflow the max_sector. Next, max_sector is passed to the copy_buffer function and used in one of the memcpy calls. An unprivileged user could trigger the bug if the device is accessible, but requires a floppy disk to be inserted. The patch adds the check for the .sect * .head multiplication for not overflowing in the set_geometry function. The bug was found by syzkaller. Signed-off-by: Denis Efremov <efremov@ispras.ru> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13floppy: fix invalid pointer dereference in drive_nameDenis Efremov
commit 9b04609b784027968348796a18f601aed9db3789 upstream. This fixes the invalid pointer dereference in the drive_name function of the floppy driver. The native_format field of the struct floppy_drive_params is used as floppy_type array index in the drive_name function. Thus, the field should be checked the same way as the autodetect field. To trigger the bug, one could use a value out of range and set the drive parameters with the FDSETDRVPRM ioctl. Next, FDGETDRVTYP ioctl should be used to call the drive_name. A floppy disk is not required to be inserted. CAP_SYS_ADMIN is required to call FDSETDRVPRM. The patch adds the check for a value of the native_format field to be in the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices. The bug was found by syzkaller. Signed-off-by: Denis Efremov <efremov@ispras.ru> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.16: Drop changes in compat_setdrvprm(), as compat ioctls go via fd_ioctl_locked() after translation in compat_ioctl.c.] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13floppy: fix out-of-bounds read in next_valid_formatDenis Efremov
commit 5635f897ed83fd539df78e98ba69ee91592f9bb8 upstream. This fixes a global out-of-bounds read access in the next_valid_format function of the floppy driver. The values from autodetect field of the struct floppy_drive_params are used as indices for the floppy_type array in the next_valid_format function 'floppy_type[DP->autodetect[probed_format]].sect'. To trigger the bug, one could use a value out of range and set the drive parameters with the FDSETDRVPRM ioctl. A floppy disk is not required to be inserted. CAP_SYS_ADMIN is required to call FDSETDRVPRM. The patch adds the check for values of the autodetect field to be in the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices. The bug was found by syzkaller. Signed-off-by: Denis Efremov <efremov@ispras.ru> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.16: Drop changes in compat_setdrvprm(), as compat ioctls go via fd_ioctl_locked() after translation in compat_ioctl.c.] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13floppy: fix div-by-zero in setup_format_paramsDenis Efremov
commit f3554aeb991214cbfafd17d55e2bfddb50282e32 upstream. This fixes a divide by zero error in the setup_format_params function of the floppy driver. Two consecutive ioctls can trigger the bug: The first one should set the drive geometry with such .sect and .rate values for the F_SECT_PER_TRACK to become zero. Next, the floppy format operation should be called. A floppy disk is not required to be inserted. An unprivileged user could trigger the bug if the device is accessible. The patch checks F_SECT_PER_TRACK for a non-zero value in the set_geometry function. The proper check should involve a reasonable upper limit for the .sect and .rate fields, but it could change the UAPI. The patch also checks F_SECT_PER_TRACK in the setup_format_params, and cancels the formatting operation in case of zero. The bug was found by syzkaller. Signed-off-by: Denis Efremov <efremov@ispras.ru> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13powerpc/tm: Fix oops on sigreturn on systems without TMMichael Neuling
commit f16d80b75a096c52354c6e0a574993f3b0dfbdfe upstream. On systems like P9 powernv where we have no TM (or P8 booted with ppc_tm=off), userspace can construct a signal context which still has the MSR TS bits set. The kernel tries to restore this context which results in the following crash: Unexpected TM Bad Thing exception at c0000000000022fc (msr 0x8000000102a03031) tm_scratch=800000020280f033 Oops: Unrecoverable exception, sig: 6 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 1636 Comm: sigfuz Not tainted 5.2.0-11043-g0a8ad0ffa4 #69 NIP: c0000000000022fc LR: 00007fffb2d67e48 CTR: 0000000000000000 REGS: c00000003fffbd70 TRAP: 0700 Not tainted (5.2.0-11045-g7142b497d8) MSR: 8000000102a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[E]> CR: 42004242 XER: 00000000 CFAR: c0000000000022e0 IRQMASK: 0 GPR00: 0000000000000072 00007fffb2b6e560 00007fffb2d87f00 0000000000000669 GPR04: 00007fffb2b6e728 0000000000000000 0000000000000000 00007fffb2b6f2a8 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 00007fffb2b76900 0000000000000000 0000000000000000 GPR16: 00007fffb2370000 00007fffb2d84390 00007fffea3a15ac 000001000a250420 GPR20: 00007fffb2b6f260 0000000010001770 0000000000000000 0000000000000000 GPR24: 00007fffb2d843a0 00007fffea3a14a0 0000000000010000 0000000000800000 GPR28: 00007fffea3a14d8 00000000003d0f00 0000000000000000 00007fffb2b6e728 NIP [c0000000000022fc] rfi_flush_fallback+0x7c/0x80 LR [00007fffb2d67e48] 0x7fffb2d67e48 Call Trace: Instruction dump: e96a0220 e96a02a8 e96a0330 e96a03b8 394a0400 4200ffdc 7d2903a6 e92d0c00 e94d0c08 e96d0c10 e82d0c18 7db242a6 <4c000024> 7db243a6 7db142a6 f82d0c18 The problem is the signal code assumes TM is enabled when CONFIG_PPC_TRANSACTIONAL_MEM is enabled. This may not be the case as with P9 powernv or if `ppc_tm=off` is used on P8. This means any local user can crash the system. Fix the problem by returning a bad stack frame to the user if they try to set the MSR TS bits with sigreturn() on systems where TM is not supported. Found with sigfuz kernel selftest on P9. This fixes CVE-2019-13648. Fixes: 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context") Reported-by: Praveen Pandey <Praveen.Pandey@in.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190719050502.405-1-mikey@neuling.org Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13Input: gtco - bounds check collection indent levelGrant Hernandez
commit 2a017fd82c5402b3c8df5e3d6e5165d9e6147dc1 upstream. The GTCO tablet input driver configures itself from an HID report sent via USB during the initial enumeration process. Some debugging messages are generated during the parsing. A debugging message indentation counter is not bounds checked, leading to the ability for a specially crafted HID report to cause '-' and null bytes be written past the end of the indentation array. As long as the kernel has CONFIG_DYNAMIC_DEBUG enabled, this code will not be optimized out. This was discovered during code review after a previous syzkaller bug was found in this driver. Signed-off-by: Grant Hernandez <granthernandez@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13Bluetooth: hci_uart: check for missing tty operationsVladis Dronov
commit b36a1552d7319bbfd5cf7f08726c23c5c66d4f73 upstream. Certain ttys operations (pty_unix98_ops) lack tiocmget() and tiocmset() functions which are called by the certain HCI UART protocols (hci_ath, hci_bcm, hci_intel, hci_mrvl, hci_qca) via hci_uart_set_flow_control() or directly. This leads to an execution at NULL and can be triggered by an unprivileged user. Fix this by adding a helper function and a check for the missing tty operations in the protocols code. This fixes CVE-2019-10207. The Fixes: lines list commits where calls to tiocm[gs]et() or hci_uart_set_flow_control() were added to the HCI UART protocols. Link: https://syzkaller.appspot.com/bug?id=1b42faa2848963564a5b1b7f8c837ea7b55ffa50 Reported-by: syzbot+79337b501d6aa974d0f6@syzkaller.appspotmail.com Fixes: b3190df62861 ("Bluetooth: Support for Atheros AR300x serial chip") Fixes: 118612fb9165 ("Bluetooth: hci_bcm: Add suspend/resume PM functions") Fixes: ff2895592f0f ("Bluetooth: hci_intel: Add Intel baudrate configuration support") Fixes: 162f812f23ba ("Bluetooth: hci_uart: Add Marvell support") Fixes: fa9ad876b8e0 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990") Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Yu-Chen, Cho <acho@suse.com> Tested-by: Yu-Chen, Cho <acho@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.16: - Only hci_ath is affected - There is no serdev support] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13vhost: scsi: add weight supportJason Wang
commit c1ea02f15ab5efb3e93fc3144d895410bf79fcf2 upstream. This patch will check the weight and exit the loop if we exceeds the weight. This is useful for preventing scsi kthread from hogging cpu which is guest triggerable. This addresses CVE-2019-3900. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Fixes: 057cbf49a1f0 ("tcm_vhost: Initial merge for vhost level target fabric driver") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> [bwh: Backported to 3.16: - Drop changes in vhost_scsi_ctl_handle_vq() - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13vhost_net: fix possible infinite loopJason Wang
commit e2412c07f8f3040593dfb88207865a3cd58680c0 upstream. When the rx buffer is too small for a packet, we will discard the vq descriptor and retry it for the next packet: while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk, &busyloop_intr))) { ... /* On overrun, truncate and discard */ if (unlikely(headcount > UIO_MAXIOV)) { iov_iter_init(&msg.msg_iter, READ, vq->iov, 1, 1); err = sock->ops->recvmsg(sock, &msg, 1, MSG_DONTWAIT | MSG_TRUNC); pr_debug("Discarded rx packet: len %zd\n", sock_len); continue; } ... } This makes it possible to trigger a infinite while..continue loop through the co-opreation of two VMs like: 1) Malicious VM1 allocate 1 byte rx buffer and try to slow down the vhost process as much as possible e.g using indirect descriptors or other. 2) Malicious VM2 generate packets to VM1 as fast as possible Fixing this by checking against weight at the end of RX and TX loop. This also eliminate other similar cases when: - userspace is consuming the packets in the meanwhile - theoretical TOCTOU attack if guest moving avail index back and forth to hit the continue after vhost find guest just add new buffers This addresses CVE-2019-3900. Fixes: d8316f3991d20 ("vhost: fix total length when packets are too short") Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> [bwh: Backported to 3.16: - Both Tx modes are handled in one loop in handle_tx() - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13vhost: introduce vhost_exceeds_weight()Jason Wang
commit e82b9b0727ff6d665fff2d326162b460dded554d upstream. We used to have vhost_exceeds_weight() for vhost-net to: - prevent vhost kthread from hogging the cpu - balance the time spent between TX and RX This function could be useful for vsock and scsi as well. So move it to vhost.c. Device must specify a weight which counts the number of requests, or it can also specific a byte_weight which counts the number of bytes that has been processed. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> [bwh: Backported to 3.16: - Drop changes to vhost_vsock - In vhost_net, both Tx modes are handled in one loop in handle_tx() - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13vhost_net: introduce vhost_exceeds_weight()Jason Wang
commit 272f35cba53d088085e5952fd81d7a133ab90789 upstream. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13vhost_net: use packet weight for rx handler, tooPaolo Abeni
commit db688c24eada63b1efe6d0d7d835e5c3bdd71fd3 upstream. Similar to commit a2ac99905f1e ("vhost-net: set packet weight of tx polling to 2 * vq size"), we need a packet-based limit for handler_rx, too - elsewhere, under rx flood with small packets, tx can be delayed for a very long time, even without busypolling. The pkt limit applied to handle_rx must be the same applied by handle_tx, or we will get unfair scheduling between rx and tx. Tying such limit to the queue length makes it less effective for large queue length values and can introduce large process scheduler latencies, so a constant valued is used - likewise the existing bytes limit. The selected limit has been validated with PVP[1] performance test with different queue sizes: queue size 256 512 1024 baseline 366 354 362 weight 128 715 723 670 weight 256 740 745 733 weight 512 600 460 583 weight 1024 423 427 418 A packet weight of 256 gives peek performances in under all the tested scenarios. No measurable regression in unidirectional performance tests has been detected. [1] https://developers.redhat.com/blog/2017/06/05/measuring-and-comparing-open-vswitch-performance/ Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13vhost-net: set packet weight of tx polling to 2 * vq sizehaibinzhang(张海斌)
commit a2ac99905f1ea8b15997a6ec39af69aa28a3653b upstream. handle_tx will delay rx for tens or even hundreds of milliseconds when tx busy polling udp packets with small length(e.g. 1byte udp payload), because setting VHOST_NET_WEIGHT takes into account only sent-bytes but no single packet length. Ping-Latencies shown below were tested between two Virtual Machines using netperf (UDP_STREAM, len=1), and then another machine pinged the client: vq size=256 Packet-Weight Ping-Latencies(millisecond) min avg max Origin 3.319 18.489 57.303 64 1.643 2.021 2.552 128 1.825 2.600 3.224 256 1.997 2.710 4.295 512 1.860 3.171 4.631 1024 2.002 4.173 9.056 2048 2.257 5.650 9.688 4096 2.093 8.508 15.943 vq size=512 Packet-Weight Ping-Latencies(millisecond) min avg max Origin 6.537 29.177 66.245 64 2.798 3.614 4.403 128 2.861 3.820 4.775 256 3.008 4.018 4.807 512 3.254 4.523 5.824 1024 3.079 5.335 7.747 2048 3.944 8.201 12.762 4096 4.158 11.057 19.985 Seems pretty consistent, a small dip at 2 VQ sizes. Ring size is a hint from device about a burst size it can tolerate. Based on benchmarks, set the weight to 2 * vq size. To evaluate this change, another tests were done using netperf(RR, TX) between two machines with Intel(R) Xeon(R) Gold 6133 CPU @ 2.50GHz, and vq size was tweaked through qemu. Results shown below does not show obvious changes. vq size=256 TCP_RR vq size=512 TCP_RR size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize% 1/ 1/ -7%/ -2% 1/ 1/ 0%/ -2% 1/ 4/ +1%/ 0% 1/ 4/ +1%/ 0% 1/ 8/ +1%/ -2% 1/ 8/ 0%/ +1% 64/ 1/ -6%/ 0% 64/ 1/ +7%/ +3% 64/ 4/ 0%/ +2% 64/ 4/ -1%/ +1% 64/ 8/ 0%/ 0% 64/ 8/ -1%/ -2% 256/ 1/ -3%/ -4% 256/ 1/ -4%/ -2% 256/ 4/ +3%/ +4% 256/ 4/ +1%/ +2% 256/ 8/ +2%/ 0% 256/ 8/ +1%/ -1% vq size=256 UDP_RR vq size=512 UDP_RR size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize% 1/ 1/ -5%/ +1% 1/ 1/ -3%/ -2% 1/ 4/ +4%/ +1% 1/ 4/ -2%/ +2% 1/ 8/ -1%/ -1% 1/ 8/ -1%/ 0% 64/ 1/ -2%/ -3% 64/ 1/ +1%/ +1% 64/ 4/ -5%/ -1% 64/ 4/ +2%/ 0% 64/ 8/ 0%/ -1% 64/ 8/ -2%/ +1% 256/ 1/ +7%/ +1% 256/ 1/ -7%/ 0% 256/ 4/ +1%/ +1% 256/ 4/ -3%/ -4% 256/ 8/ +2%/ +2% 256/ 8/ +1%/ +1% vq size=256 TCP_STREAM vq size=512 TCP_STREAM size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize% 64/ 1/ 0%/ -3% 64/ 1/ 0%/ 0% 64/ 4/ +3%/ -1% 64/ 4/ -2%/ +4% 64/ 8/ +9%/ -4% 64/ 8/ -1%/ +2% 256/ 1/ +1%/ -4% 256/ 1/ +1%/ +1% 256/ 4/ -1%/ -1% 256/ 4/ -3%/ 0% 256/ 8/ +7%/ +5% 256/ 8/ -3%/ 0% 512/ 1/ +1%/ 0% 512/ 1/ -1%/ -1% 512/ 4/ +1%/ -1% 512/ 4/ 0%/ 0% 512/ 8/ +7%/ -5% 512/ 8/ +6%/ -1% 1024/ 1/ 0%/ -1% 1024/ 1/ 0%/ +1% 1024/ 4/ +3%/ 0% 1024/ 4/ +1%/ 0% 1024/ 8/ +8%/ +5% 1024/ 8/ -1%/ 0% 2048/ 1/ +2%/ +2% 2048/ 1/ -1%/ 0% 2048/ 4/ +1%/ 0% 2048/ 4/ 0%/ -1% 2048/ 8/ -2%/ 0% 2048/ 8/ 5%/ -1% 4096/ 1/ -2%/ 0% 4096/ 1/ -2%/ 0% 4096/ 4/ +2%/ 0% 4096/ 4/ 0%/ 0% 4096/ 8/ +9%/ -2% 4096/ 8/ -5%/ -1% Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Haibin Zhang <haibinzhang@tencent.com> Signed-off-by: Yunfang Tai <yunfangtai@tencent.com> Signed-off-by: Lidong Chen <lidongchen@tencent.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13x86/speculation/swapgs: Exclude ATOMs from speculation through SWAPGSThomas Gleixner
commit f36cf386e3fec258a341d446915862eded3e13d8 upstream. Intel provided the following information: On all current Atom processors, instructions that use a segment register value (e.g. a load or store) will not speculatively execute before the last writer of that segment retires. Thus they will not use a speculatively written segment value. That means on ATOMs there is no speculation through SWAPGS, so the SWAPGS entry paths can be excluded from the extra LFENCE if PTI is disabled. Create a separate bug flag for the through SWAPGS speculation and mark all out-of-order ATOMs and AMD/HYGON CPUs as not affected. The in-order ATOMs are excluded from the whole mitigation mess anyway. Reported-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> [bwh: Backported to 3.16: - There's no whitelist entry (or any support) for Hygon CPUs - Use the next available X86_BUG number - Adjust context, indentation] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13x86/entry/64: Use JMP instead of JMPQJosh Poimboeuf
commit 64dbc122b20f75183d8822618c24f85144a5a94d upstream. Somehow the swapgs mitigation entry code patch ended up with a JMPQ instruction instead of JMP, where only the short jump is needed. Some assembler versions apparently fail to optimize JMPQ into a two-byte JMP when possible, instead always using a 7-byte JMP with relocation. For some reason that makes the entry code explode with a #GP during boot. Change it back to "JMP" as originally intended. Fixes: 18ec54fdd6d1 ("x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [bwh: Backported to 3.16: adjust filename, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13x86/speculation: Enable Spectre v1 swapgs mitigationsJosh Poimboeuf
commit a2059825986a1c8143fd6698774fa9d83733bb11 upstream. The previous commit added macro calls in the entry code which mitigate the Spectre v1 swapgs issue if the X86_FEATURE_FENCE_SWAPGS_* features are enabled. Enable those features where applicable. The mitigations may be disabled with "nospectre_v1" or "mitigations=off". There are different features which can affect the risk of attack: - When FSGSBASE is enabled, unprivileged users are able to place any value in GS, using the wrgsbase instruction. This means they can write a GS value which points to any value in kernel space, which can be useful with the following gadget in an interrupt/exception/NMI handler: if (coming from user space) swapgs mov %gs:<percpu_offset>, %reg1 // dependent load or store based on the value of %reg // for example: mov %(reg1), %reg2 If an interrupt is coming from user space, and the entry code speculatively skips the swapgs (due to user branch mistraining), it may speculatively execute the GS-based load and a subsequent dependent load or store, exposing the kernel data to an L1 side channel leak. Note that, on Intel, a similar attack exists in the above gadget when coming from kernel space, if the swapgs gets speculatively executed to switch back to the user GS. On AMD, this variant isn't possible because swapgs is serializing with respect to future GS-based accesses. NOTE: The FSGSBASE patch set hasn't been merged yet, so the above case doesn't exist quite yet. - When FSGSBASE is disabled, the issue is mitigated somewhat because unprivileged users must use prctl(ARCH_SET_GS) to set GS, which restricts GS values to user space addresses only. That means the gadget would need an additional step, since the target kernel address needs to be read from user space first. Something like: if (coming from user space) swapgs mov %gs:<percpu_offset>, %reg1 mov (%reg1), %reg2 // dependent load or store based on the value of %reg2 // for example: mov %(reg2), %reg3 It's difficult to audit for this gadget in all the handlers, so while there are no known instances of it, it's entirely possible that it exists somewhere (or could be introduced in the future). Without tooling to analyze all such code paths, consider it vulnerable. Effects of SMAP on the !FSGSBASE case: - If SMAP is enabled, and the CPU reports RDCL_NO (i.e., not susceptible to Meltdown), the kernel is prevented from speculatively reading user space memory, even L1 cached values. This effectively disables the !FSGSBASE attack vector. - If SMAP is enabled, but the CPU *is* susceptible to Meltdown, SMAP still prevents the kernel from speculatively reading user space memory. But it does *not* prevent the kernel from reading the user value from L1, if it has already been cached. This is probably only a small hurdle for an attacker to overcome. Thanks to Dave Hansen for contributing the speculative_smap() function. Thanks to Andrew Cooper for providing the inside scoop on whether swapgs is serializing on AMD. [ tglx: Fixed the USER fence decision and polished the comment as suggested by Dave Hansen ] Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> [bwh: Backported to 3.16: - Check for X86_FEATURE_KAISER instead of X86_FEATURE_PTI - mitigations= parameter is x86-only here - powerpc doesn't have Spectre mitigations - Don't use __ro_after_init - Adjust filename, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13x86/speculation: Prepare entry code for Spectre v1 swapgs mitigationsJosh Poimboeuf
commit 18ec54fdd6d18d92025af097cd042a75cf0ea24c upstream. Spectre v1 isn't only about array bounds checks. It can affect any conditional checks. The kernel entry code interrupt, exception, and NMI handlers all have conditional swapgs checks. Those may be problematic in the context of Spectre v1, as kernel code can speculatively run with a user GS. For example: if (coming from user space) swapgs mov %gs:<percpu_offset>, %reg mov (%reg), %reg1 When coming from user space, the CPU can speculatively skip the swapgs, and then do a speculative percpu load using the user GS value. So the user can speculatively force a read of any kernel value. If a gadget exists which uses the percpu value as an address in another load/store, then the contents of the kernel value may become visible via an L1 side channel attack. A similar attack exists when coming from kernel space. The CPU can speculatively do the swapgs, causing the user GS to get used for the rest of the speculative window. The mitigation is similar to a traditional Spectre v1 mitigation, except: a) index masking isn't possible; because the index (percpu offset) isn't user-controlled; and b) an lfence is needed in both the "from user" swapgs path and the "from kernel" non-swapgs path (because of the two attacks described above). The user entry swapgs paths already have SWITCH_TO_KERNEL_CR3, which has a CR3 write when PTI is enabled. Since CR3 writes are serializing, the lfences can be skipped in those cases. On the other hand, the kernel entry swapgs paths don't depend on PTI. To avoid unnecessary lfences for the user entry case, create two separate features for alternative patching: X86_FEATURE_FENCE_SWAPGS_USER X86_FEATURE_FENCE_SWAPGS_KERNEL Use these features in entry code to patch in lfences where needed. The features aren't enabled yet, so there's no functional change. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> [bwh: Backported to 3.16: - Assign the CPU feature bits from word 7 - Add FENCE_SWAPGS_KERNEL_ENTRY to NMI entry, since it does not use paranoid_entry - Add a return after .Lerror_entry_from_usermode_after_swapgs, done upstream by commit f10750536fa7 "x86/entry/64: Fix irqflag tracing wrt context tracking" - Include <asm/cpufeatures.h> in calling.h - Adjust filenames, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13x86/entry/64: Fix context tracking state warning when load_gs_index failsWanpeng Li
commit 2fa5f04f85730d0c4f49f984b7efeb4f8d5bd1fc upstream. This warning: WARNING: CPU: 0 PID: 3331 at arch/x86/entry/common.c:45 enter_from_user_mode+0x32/0x50 CPU: 0 PID: 3331 Comm: ldt_gdt_64 Not tainted 4.8.0-rc7+ #13 Call Trace: dump_stack+0x99/0xd0 __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 enter_from_user_mode+0x32/0x50 error_entry+0x6d/0xc0 ? general_protection+0x12/0x30 ? native_load_gs_index+0xd/0x20 ? do_set_thread_area+0x19c/0x1f0 SyS_set_thread_area+0x24/0x30 do_int80_syscall_32+0x7c/0x220 entry_INT80_compat+0x38/0x50 ... can be reproduced by running the GS testcase of the ldt_gdt test unit in the x86 selftests. do_int80_syscall_32() will call enter_form_user_mode() to convert context tracking state from user state to kernel state. The load_gs_index() call can fail with user gsbase, gsbase will be fixed up and proceed if this happen. However, enter_from_user_mode() will be called again in the fixed up path though it is context tracking kernel state currently. This patch fixes it by just fixing up gsbase and telling lockdep that IRQs are off once load_gs_index() failed with user gsbase. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1475197266-3440-1-git-send-email-wanpeng.li@hotmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> [bwh: Backported to 3.16 as dependency of commit 18ec54fdd6d1 "x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations": - Adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13x86/entry/64: Really create an error-entry-from-usermode code pathAndy Lutomirski
commit cb6f64ed5a04036eef07e70b57dd5dd78f2fbcef upstream. In 539f51136500 ("x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code"), I arranged the code slightly wrong -- IRET faults would skip the code path that was intended to execute on all error entries from user mode. Fix it up. While we're at it, make all the labels in error_entry local. This does not fix a bug, but we'll need it, and it slightly shrinks the code. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/91e17891e49fa3d61357eadc451529ad48143ee1.1435952415.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> [bwh: Backported to 3.16 as dependency of commit 18ec54fdd6d1 "x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations": - Adjust filename, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode codeAndy Lutomirski
commit 539f5113650068ba221197f190267ab727296ef5 upstream. The error_entry/error_exit code to handle gsbase and whether we return to user mdoe was a mess: - error_sti was misnamed. In particular, it did not enable interrupts. - Error handling for gs_change was hopelessly tangled the normal usermode path. Separate it out. This saves a branch in normal entries from kernel mode. - The comments were bad. Fix it up. As a nice side effect, there's now a code path that happens on error entries from user mode. We'll use it soon. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/f1be898ab93360169fb845ab85185948832209ee.1433878454.git.luto@kernel.org [ Prettified it, clarified comments some more. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> [bwh: Backported to 3.16 as dependency of commit 18ec54fdd6d1 "x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations": - We do not use %ebx as a flag since we already have a backport of commit b3681dd548d0 "x86/entry/64: Remove %ebx handling from error_entry/exit", so don't add the comments about that - Adjust filename, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13x86: cpufeatures: Renumber feature word 7Ben Hutchings
Use the same bit numbers for all features that are also present in 4.4.y and 4.9.y, to make further backports slightly easier. Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13ufs: fix braino in ufs_get_inode_gid() for solaris UFS flavourAl Viro
commit 4e9036042fedaffcd868d7f7aa948756c48c637d upstream. To choose whether to pick the GID from the old (16bit) or new (32bit) field, we should check if the old gid field is set to 0xffff. Mainline checks the old *UID* field instead - cut'n'paste from the corresponding code in ufs_get_inode_uid(). Fixes: 252e211e90ce Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13packet: validate msg_namelen in send directlyWillem de Bruijn
commit 486efdc8f6ce802b27e15921d2353cc740c55451 upstream. Packet sockets in datagram mode take a destination address. Verify its length before passing to dev_hard_header. Prior to 2.6.14-rc3, the send code ignored sll_halen. This is established behavior. Directly compare msg_namelen to dev->addr_len. Change v1->v2: initialize addr in all paths Fixes: 6b8d95f1795c4 ("packet: validate address length if non-zero") Suggested-by: David Laight <David.Laight@aculab.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13packet: in recvmsg msg_name return at least sizeof sockaddr_llWillem de Bruijn
commit b2cf86e1563e33a14a1c69b3e508d15dc12f804c upstream. Packet send checks that msg_name is at least sizeof sockaddr_ll. Packet recv must return at least this length, so that its output can be passed unmodified to packet send. This ceased to be true since adding support for lladdr longer than sll_addr. Since, the return value uses true address length. Always return at least sizeof sockaddr_ll, even if address length is shorter. Zero the padding bytes. Change v1->v2: do not overwrite zeroed padding again. use copy_len. Fixes: 0fb375fb9b93 ("[AF_PACKET]: Allow for > 8 byte hardware addresses.") Suggested-by: David Laight <David.Laight@aculab.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13l2ip: fix possible use-after-freeEric Dumazet
commit a622b40035d16196bf19b2b33b854862595245fc upstream. Before taking a refcount on a rcu protected structure, we need to make sure the refcount is not zero. syzbot reported : refcount_t: increment on 0; use-after-free. WARNING: CPU: 1 PID: 23533 at lib/refcount.c:156 refcount_inc_checked lib/refcount.c:156 [inline] WARNING: CPU: 1 PID: 23533 at lib/refcount.c:156 refcount_inc_checked+0x61/0x70 lib/refcount.c:154 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 23533 Comm: syz-executor.2 Not tainted 5.1.0-rc7+ #93 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x45 kernel/panic.c:571 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:179 [inline] fixup_bug arch/x86/kernel/traps.c:174 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:272 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:291 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:refcount_inc_checked lib/refcount.c:156 [inline] RIP: 0010:refcount_inc_checked+0x61/0x70 lib/refcount.c:154 Code: 1d 98 2b 2a 06 31 ff 89 de e8 db 2c 40 fe 84 db 75 dd e8 92 2b 40 fe 48 c7 c7 20 7a a1 87 c6 05 78 2b 2a 06 01 e8 7d d9 12 fe <0f> 0b eb c1 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 RSP: 0018:ffff888069f0fba8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 000000000000f353 RSI: ffffffff815afcb6 RDI: ffffed100d3e1f67 RBP: ffff888069f0fbb8 R08: ffff88809b1845c0 R09: ffffed1015d23ef1 R10: ffffed1015d23ef0 R11: ffff8880ae91f787 R12: ffff8880a8f26968 R13: 0000000000000004 R14: dffffc0000000000 R15: ffff8880a49a6440 l2tp_tunnel_inc_refcount net/l2tp/l2tp_core.h:240 [inline] l2tp_tunnel_get+0x250/0x580 net/l2tp/l2tp_core.c:173 pppol2tp_connect+0xc00/0x1c70 net/l2tp/l2tp_ppp.c:702 __sys_connect+0x266/0x330 net/socket.c:1808 __do_sys_connect net/socket.c:1819 [inline] __se_sys_connect net/socket.c:1816 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1816 Fixes: 54652eb12c1b ("l2tp: hold tunnel while looking up sessions in l2tp_netlink") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: use atomic not refcount API] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13ipv6/flowlabel: wait rcu grace period before put_pid()Eric Dumazet
commit 6c0afef5fb0c27758f4d52b2210c61b6bd8b4470 upstream. syzbot was able to catch a use-after-free read in pid_nr_ns() [1] ip6fl_seq_show() seems to use RCU protection, dereferencing fl->owner.pid but fl_free() releases fl->owner.pid before rcu grace period is started. [1] BUG: KASAN: use-after-free in pid_nr_ns+0x128/0x140 kernel/pid.c:407 Read of size 4 at addr ffff888094012a04 by task syz-executor.0/18087 CPU: 0 PID: 18087 Comm: syz-executor.0 Not tainted 5.1.0-rc6+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131 pid_nr_ns+0x128/0x140 kernel/pid.c:407 ip6fl_seq_show+0x2f8/0x4f0 net/ipv6/ip6_flowlabel.c:794 seq_read+0xad3/0x1130 fs/seq_file.c:268 proc_reg_read+0x1fe/0x2c0 fs/proc/inode.c:227 do_loop_readv_writev fs/read_write.c:701 [inline] do_loop_readv_writev fs/read_write.c:688 [inline] do_iter_read+0x4a9/0x660 fs/read_write.c:922 vfs_readv+0xf0/0x160 fs/read_write.c:984 kernel_readv fs/splice.c:358 [inline] default_file_splice_read+0x475/0x890 fs/splice.c:413 do_splice_to+0x12a/0x190 fs/splice.c:876 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:953 do_splice_direct+0x1da/0x2a0 fs/splice.c:1062 do_sendfile+0x597/0xd00 fs/read_write.c:1443 __do_sys_sendfile64 fs/read_write.c:1498 [inline] __se_sys_sendfile64 fs/read_write.c:1490 [inline] __x64_sys_sendfile64+0x15a/0x220 fs/read_write.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458da9 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f300d24bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000458da9 RDX: 00000000200000c0 RSI: 0000000000000008 RDI: 0000000000000007 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000005a R11: 0000000000000246 R12: 00007f300d24c6d4 R13: 00000000004c5fa3 R14: 00000000004da748 R15: 00000000ffffffff Allocated by task 17543: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_kmalloc mm/kasan/common.c:497 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505 slab_post_alloc_hook mm/slab.h:437 [inline] slab_alloc mm/slab.c:3393 [inline] kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555 alloc_pid+0x55/0x8f0 kernel/pid.c:168 copy_process.part.0+0x3b08/0x7980 kernel/fork.c:1932 copy_process kernel/fork.c:1709 [inline] _do_fork+0x257/0xfd0 kernel/fork.c:2226 __do_sys_clone kernel/fork.c:2333 [inline] __se_sys_clone kernel/fork.c:2327 [inline] __x64_sys_clone+0xbf/0x150 kernel/fork.c:2327 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7789: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467 __cache_free mm/slab.c:3499 [inline] kmem_cache_free+0x86/0x260 mm/slab.c:3765 put_pid.part.0+0x111/0x150 kernel/pid.c:111 put_pid+0x20/0x30 kernel/pid.c:105 fl_free+0xbe/0xe0 net/ipv6/ip6_flowlabel.c:102 ip6_fl_gc+0x295/0x3e0 net/ipv6/ip6_flowlabel.c:152 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 The buggy address belongs to the object at ffff888094012a00 which belongs to the cache pid_2 of size 88 The buggy address is located 4 bytes inside of 88-byte region [ffff888094012a00, ffff888094012a58) The buggy address belongs to the page: page:ffffea0002500480 count:1 mapcount:0 mapping:ffff88809a483080 index:0xffff888094012980 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea00018a3508 ffffea0002524a88 ffff88809a483080 raw: ffff888094012980 ffff888094012000 000000010000001b 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888094012900: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012980: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc >ffff888094012a00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ^ ffff888094012a80: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012b00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc Fixes: 4f82f45730c6 ("net ip6 flowlabel: Make owner a union of struct pid * and kuid_t") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: Move the release_net() call too, not that it does anything.] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13ipv6: invert flowlabel sharing check in process and user modeWillem de Bruijn
commit 95c169251bf734aa555a1e8043e4d88ec97a04ec upstream. A request for a flowlabel fails in process or user exclusive mode must fail if the caller pid or uid does not match. Invert the test. Previously, the test was unsafe wrt PID recycling, but indeed tested for inequality: fl1->owner != fl->owner Fixes: 4f82f45730c68 ("net ip6 flowlabel: Make owner a union of struct pid* and kuid_t") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13slip: make slhc_free() silently accept an error pointerLinus Torvalds
commit baf76f0c58aec435a3a864075b8f6d8ee5d1f17e upstream. This way, slhc_free() accepts what slhc_init() returns, whether that is an error or not. In particular, the pattern in sl_alloc_bufs() is slcomp = slhc_init(16, 16); ... slhc_free(slcomp); for the error handling path, and rather than complicate that code, just make it ok to always free what was returned by the init function. That's what the code used to do before commit 4ab42d78e37a ("ppp, slip: Validate VJ compression slot parameters completely") when slhc_init() just returned NULL for the error case, with no actual indication of the details of the error. Reported-by: syzbot+45474c076a4927533d2e@syzkaller.appspotmail.com Fixes: 4ab42d78e37a ("ppp, slip: Validate VJ compression slot parameters completely") Acked-by: Ben Hutchings <ben@decadent.org.uk> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13fs/proc/proc_sysctl.c: Fix a NULL pointer dereferenceYueHaibing
commit 89189557b47b35683a27c80ee78aef18248eefb4 upstream. Syzkaller report this: sysctl could not get directory: /net//bridge -12 kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 7027 Comm: syz-executor.0 Tainted: G C 5.1.0-rc3+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__write_once_size include/linux/compiler.h:220 [inline] RIP: 0010:__rb_change_child include/linux/rbtree_augmented.h:144 [inline] RIP: 0010:__rb_erase_augmented include/linux/rbtree_augmented.h:186 [inline] RIP: 0010:rb_erase+0x5f4/0x19f0 lib/rbtree.c:459 Code: 00 0f 85 60 13 00 00 48 89 1a 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 89 f2 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 75 0c 00 00 4d 85 ed 4c 89 2e 74 ce 4c 89 ea 48 RSP: 0018:ffff8881bb507778 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff8881f224b5b8 RCX: ffffffff818f3f6a RDX: 000000000000000a RSI: 0000000000000050 RDI: ffff8881f224b568 RBP: 0000000000000000 R08: ffffed10376a0ef4 R09: ffffed10376a0ef4 R10: 0000000000000001 R11: ffffed10376a0ef4 R12: ffff8881f224b558 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f3e7ce13700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd60fbe9398 CR3: 00000001cb55c001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: erase_entry fs/proc/proc_sysctl.c:178 [inline] erase_header+0xe3/0x160 fs/proc/proc_sysctl.c:207 start_unregistering fs/proc/proc_sysctl.c:331 [inline] drop_sysctl_table+0x558/0x880 fs/proc/proc_sysctl.c:1631 get_subdir fs/proc/proc_sysctl.c:1022 [inline] __register_sysctl_table+0xd65/0x1090 fs/proc/proc_sysctl.c:1335 br_netfilter_init+0x68/0x1000 [br_netfilter] do_one_initcall+0xbc/0x47d init/main.c:901 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Modules linked in: br_netfilter(+) backlight comedi(C) hid_sensor_hub max3100 ti_ads8688 udc_core fddi snd_mona leds_gpio rc_streamzap mtd pata_netcell nf_log_common rc_winfast udp_tunnel snd_usbmidi_lib snd_usb_toneport snd_usb_line6 snd_rawmidi snd_seq_device snd_hwdep videobuf2_v4l2 videobuf2_common videodev media videobuf2_vmalloc videobuf2_memops rc_gadmei_rm008z 8250_of smm665 hid_tmff hid_saitek hwmon_vid rc_ati_tv_wonder_hd_600 rc_core pata_pdc202xx_old dn_rtmsg as3722 ad714x_i2c ad714x snd_soc_cs4265 hid_kensington panel_ilitek_ili9322 drm drm_panel_orientation_quirks ipack cdc_phonet usbcore phonet hid_jabra hid extcon_arizona can_dev industrialio_triggered_buffer kfifo_buf industrialio adm1031 i2c_mux_ltc4306 i2c_mux ipmi_msghandler mlxsw_core snd_soc_cs35l34 snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer ac97_bus snd_compress snd soundcore gpio_da9055 uio ecdh_generic mdio_thunder of_mdio fixed_phy libphy mdio_cavium iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel ide_pci_generic piix aes_x86_64 crypto_simd cryptd ide_core glue_helper input_leds psmouse intel_agp intel_gtt serio_raw ata_generic i2c_piix4 agpgart pata_acpi parport_pc parport floppy rtc_cmos sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: br_netfilter] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 68741688d5fbfe85 ]--- commit 23da9588037e ("fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links") forgot to handle start_unregistering() case, while header->parent is NULL, it calls erase_header() and as seen in the above syzkaller call trace, accessing &header->parent->root will trigger a NULL pointer dereference. As that commit explained, there is also no need to call start_unregistering() if header->parent is NULL. Link: http://lkml.kernel.org/r/20190409153622.28112-1-yuehaibing@huawei.com Fixes: 23da9588037e ("fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links") Fixes: 0e47c99d7fe25 ("sysctl: Replace root_list with links between sysctl_table_sets") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13trace: Fix preempt_enable_no_resched() abusePeter Zijlstra
commit d6097c9e4454adf1f8f2c9547c2fa6060d55d952 upstream. Unless the very next line is schedule(), or implies it, one must not use preempt_enable_no_resched(). It can cause a preemption to go missing and thereby cause arbitrary delays, breaking the PREEMPT=y invariant. Link: http://lkml.kernel.org/r/20190423200318.GY14281@hirez.programming.kicks-ass.net Cc: Waiman Long <longman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: the arch/x86 maintainers <x86@kernel.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: huang ying <huang.ying.caritas@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Fixes: 2c2d7329d8af ("tracing/ftrace: use preempt_enable_no_resched_notrace in ring_buffer_time_stamp()") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13l2tp: use rcu_dereference_sk_user_data() in l2tp_udp_encap_recv()Eric Dumazet
commit c1c477217882c610a2ba0268f5faf36c9c092528 upstream. Canonical way to fetch sk_user_data from an encap_rcv() handler called from UDP stack in rcu protected section is to use rcu_dereference_sk_user_data(), otherwise compiler might read it multiple times. Fixes: d00fa9adc528 ("il2tp: fix races with tunnel socket close") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13sched/numa: Fix a possible divide-by-zeroXie XiuQi
commit a860fa7b96e1a1c974556327aa1aee852d434c21 upstream. sched_clock_cpu() may not be consistent between CPUs. If a task migrates to another CPU, then se.exec_start is set to that CPU's rq_clock_task() by update_stats_curr_start(). Specifically, the new value might be before the old value due to clock skew. So then if in numa_get_avg_runtime() the expression: 'now - p->last_task_numa_placement' ends up as -1, then the divider '*period + 1' in task_numa_placement() is 0 and things go bang. Similar to update_curr(), check if time goes backwards to avoid this. [ peterz: Wrote new changelog. ] [ mingo: Tweaked the code comment. ] Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: cj.chengjian@huawei.com Link: http://lkml.kernel.org/r/20190425080016.GX11158@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13usb: usbip: fix isoc packet num validation in get_pipeMalte Leip
commit c409ca3be3c6ff3a1eeb303b191184e80d412862 upstream. Change the validation of number_of_packets in get_pipe to compare the number of packets to a fixed maximum number of packets allowed, set to be 1024. This number was chosen due to it being used by other drivers as well, for example drivers/usb/host/uhci-q.c Background/reason: The get_pipe function in stub_rx.c validates the number of packets in isochronous mode and aborts with an error if that number is too large, in order to prevent malicious input from possibly triggering large memory allocations. This was previously done by checking whether pdu->u.cmd_submit.number_of_packets is bigger than the number of packets that would be needed for pdu->u.cmd_submit.transfer_buffer_length bytes if all except possibly the last packet had maximum length, given by usb_endpoint_maxp(epd) * usb_endpoint_maxp_mult(epd). This leads to an error if URBs with packets shorter than the maximum possible length are submitted, which is allowed according to Documentation/driver-api/usb/URB.rst and occurs for example with the snd-usb-audio driver. Fixes: c6688ef9f297 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input") Signed-off-by: Malte Leip <malte@leip.net> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.16: adjust filenames] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2019-08-13USB: w1 ds2490: Fix bug caused by improper use of altsetting arrayAlan Stern
commit c114944d7d67f24e71562fcfc18d550ab787e4d4 upstream. The syzkaller USB fuzzer spotted a slab-out-of-bounds bug in the ds2490 driver. This bug is caused by improper use of the altsetting array in the usb_interface structure (the array's entries are not always stored in numerical order), combined with a naive assumption that all interfaces probed by the driver will have the expected number of altsettings. The bug can be fixed by replacing references to the possibly non-existent intf->altsetting[alt] entry with the guaranteed-to-exist intf->cur_altsetting entry. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+d65f673b847a1a96cdba@syzkaller.appspotmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-17 01:55:03 +0000