summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-14Revert "net: sched: bump refcount for new action in ACT replace mode"Vlad Buslov
commit 4ba86128ba077fbb7d86516ae24ed642e6c3adef upstream. This reverts commit 6855e8213e06efcaf7c02a15e12b1ae64b9a7149. Following commit in series fixes the issue without introducing regression in error rollback of tcf_action_destroy(). Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14net: ieee802154: stop dump llsec params for monitorsAlexander Aring
commit 1534efc7bbc1121e92c86c2dabebaf2c9dcece19 upstream. This patch stops dumping llsec params for monitors which we don't support yet. Otherwise we will access llsec mib which isn't initialized for monitors. Reported-by: syzbot+cde43a581a8e5f317bc2@syzkaller.appspotmail.com Signed-off-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20210405003054.256017-16-aahringo@redhat.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14net: ieee802154: forbid monitor for del llsec seclevelAlexander Aring
commit 9dde130937e95b72adfae64ab21d6e7e707e2dac upstream. This patch forbids to del llsec seclevel for monitor interfaces which we don't support yet. Otherwise we will access llsec mib which isn't initialized for monitors. Reported-by: syzbot+fbf4fc11a819824e027b@syzkaller.appspotmail.com Signed-off-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20210405003054.256017-15-aahringo@redhat.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14net: ieee802154: forbid monitor for set llsec paramsAlexander Aring
commit 88c17855ac4291fb462e13a86b7516773b6c932e upstream. This patch forbids to set llsec params for monitor interfaces which we don't support yet. Reported-by: syzbot+8b6719da8a04beeafcc3@syzkaller.appspotmail.com Signed-off-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20210405003054.256017-3-aahringo@redhat.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14net: ieee802154: fix nl802154 del llsec devkeyAlexander Aring
commit 27c746869e1a135dffc2f2a80715bb7aa00445b4 upstream. This patch fixes a nullpointer dereference if NL802154_ATTR_SEC_DEVKEY is not set by the user. If this is the case nl802154 will return -EINVAL. Reported-by: syzbot+368672e0da240db53b5f@syzkaller.appspotmail.com Signed-off-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20210221174321.14210-4-aahringo@redhat.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14net: ieee802154: fix nl802154 add llsec keyAlexander Aring
commit 20d5fe2d7103f5c43ad11a3d6d259e9d61165c35 upstream. This patch fixes a nullpointer dereference if NL802154_ATTR_SEC_KEY is not set by the user. If this is the case nl802154 will return -EINVAL. Reported-by: syzbot+ce4e062c2d51977ddc50@syzkaller.appspotmail.com Signed-off-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20210221174321.14210-3-aahringo@redhat.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14net: ieee802154: fix nl802154 del llsec devAlexander Aring
commit 3d1eac2f45585690d942cf47fd7fbd04093ebd1b upstream. This patch fixes a nullpointer dereference if NL802154_ATTR_SEC_DEVICE is not set by the user. If this is the case nl802154 will return -EINVAL. Reported-by: syzbot+d946223c2e751d136c94@syzkaller.appspotmail.com Signed-off-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20210221174321.14210-2-aahringo@redhat.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14net: ieee802154: fix nl802154 del llsec keyAlexander Aring
commit 37feaaf5ceb2245e474369312bb7b922ce7bce69 upstream. This patch fixes a nullpointer dereference if NL802154_ATTR_SEC_KEY is not set by the user. If this is the case nl802154 will return -EINVAL. Reported-by: syzbot+ac5c11d2959a8b3c4806@syzkaller.appspotmail.com Signed-off-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20210221174321.14210-1-aahringo@redhat.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14net: ieee802154: nl-mac: fix check on panidAlexander Aring
commit 6f7f657f24405f426212c09260bf7fe8a52cef33 upstream. This patch fixes a null pointer derefence for panid handle by move the check for the netlink variable directly before accessing them. Reported-by: syzbot+d4c07de0144f6f63be3a@syzkaller.appspotmail.com Signed-off-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20210228151817.95700-4-aahringo@redhat.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14net: mac802154: Fix general protection faultPavel Skripkin
commit 1165affd484889d4986cf3b724318935a0b120d8 upstream. syzbot found general protection fault in crypto_destroy_tfm()[1]. It was caused by wrong clean up loop in llsec_key_alloc(). If one of the tfm array members is in IS_ERR() range it will cause general protection fault in clean up function [1]. Call Trace: crypto_free_aead include/crypto/aead.h:191 [inline] [1] llsec_key_alloc net/mac802154/llsec.c:156 [inline] mac802154_llsec_key_add+0x9e0/0xcc0 net/mac802154/llsec.c:249 ieee802154_add_llsec_key+0x56/0x80 net/mac802154/cfg.c:338 rdev_add_llsec_key net/ieee802154/rdev-ops.h:260 [inline] nl802154_add_llsec_key+0x3d3/0x560 net/ieee802154/nl802154.c:1584 genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:739 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:800 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502 genl_rcv+0x24/0x40 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reported-by: syzbot+9ec037722d2603a9f52e@syzkaller.appspotmail.com Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20210304152125.1052825-1-paskripkin@gmail.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14drivers: net: fix memory leak in peak_usb_create_devPavel Skripkin
commit a0b96b4a62745397aee662670cfc2157bac03f55 upstream. syzbot reported memory leak in peak_usb. The problem was in case of failure after calling ->dev_init()[2] in peak_usb_create_dev()[1]. The data allocated int dev_init() wasn't freed, so simple ->dev_free() call fix this problem. backtrace: [<0000000079d6542a>] kmalloc include/linux/slab.h:552 [inline] [<0000000079d6542a>] kzalloc include/linux/slab.h:682 [inline] [<0000000079d6542a>] pcan_usb_fd_init+0x156/0x210 drivers/net/can/usb/peak_usb/pcan_usb_fd.c:868 [2] [<00000000c09f9057>] peak_usb_create_dev drivers/net/can/usb/peak_usb/pcan_usb_core.c:851 [inline] [1] [<00000000c09f9057>] peak_usb_probe+0x389/0x490 drivers/net/can/usb/peak_usb/pcan_usb_core.c:949 Reported-by: syzbot+91adee8d9ebb9193d22d@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14drivers: net: fix memory leak in atusb_probePavel Skripkin
commit 6b9fbe16955152626557ec6f439f3407b7769941 upstream. syzbot reported memory leak in atusb_probe()[1]. The problem was in atusb_alloc_urbs(). Since urb is anchored, we need to release the reference to correctly free the urb backtrace: [<ffffffff82ba0466>] kmalloc include/linux/slab.h:559 [inline] [<ffffffff82ba0466>] usb_alloc_urb+0x66/0xe0 drivers/usb/core/urb.c:74 [<ffffffff82ad3888>] atusb_alloc_urbs drivers/net/ieee802154/atusb.c:362 [inline][2] [<ffffffff82ad3888>] atusb_probe+0x158/0x820 drivers/net/ieee802154/atusb.c:1038 [1] Reported-by: syzbot+28a246747e0a465127f3@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14net: tun: set tun->dev->addr_len during TUNSETLINK processingPhillip Potter
commit cca8ea3b05c972ffb5295367e6c544369b45fbdd upstream. When changing type with TUNSETLINK ioctl command, set tun->dev->addr_len to match the appropriate type, using new tun_get_addr_len utility function which returns appropriate address length for given type. Fixes a KMSAN-found uninit-value bug reported by syzbot at: https://syzkaller.appspot.com/bug?id=0766d38c656abeace60621896d705743aeefed51 Reported-by: syzbot+001516d86dbe88862cec@syzkaller.appspotmail.com Diagnosed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14cfg80211: remove WARN_ON() in cfg80211_sme_connectDu Cheng
commit 1b5ab825d9acc0f27d2f25c6252f3526832a9626 upstream. A WARN_ON(wdev->conn) would trigger in cfg80211_sme_connect(), if multiple send_msg(NL80211_CMD_CONNECT) system calls are made from the userland, which should be anticipated and handled by the wireless driver. Remove this WARN_ON() to prevent kernel panic if kernel is configured to "panic_on_warn". Bug reported by syzbot. Reported-by: syzbot+5f9392825de654244975@syzkaller.appspotmail.com Signed-off-by: Du Cheng <ducheng2@gmail.com> Link: https://lore.kernel.org/r/20210407162756.6101-1-ducheng2@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14gpiolib: Read "gpio-line-names" from a firmware nodeAndy Shevchenko
commit b41ba2ec54a70908067034f139aa23d0dd2985ce upstream. On STM32MP1, the GPIO banks are subnodes of pin-controller@50002000, see arch/arm/boot/dts/stm32mp151.dtsi. The driver for pin-controller@50002000 is in drivers/pinctrl/stm32/pinctrl-stm32.c and iterates over all of its DT subnodes when registering each GPIO bank gpiochip. Each gpiochip has: - gpio_chip.parent = dev, where dev is the device node of the pin controller - gpio_chip.of_node = np, which is the OF node of the GPIO bank Therefore, dev_fwnode(chip->parent) != of_fwnode_handle(chip.of_node), i.e. pin-controller@50002000 != pin-controller@50002000/gpio@5000*000. The original code behaved correctly, as it extracted the "gpio-line-names" from of_fwnode_handle(chip.of_node) = pin-controller@50002000/gpio@5000*000. To achieve the same behaviour, read property from the firmware node. Fixes: 7cba1a4d5e162 ("gpiolib: generalize devprop_gpiochip_set_names() for device properties") Reported-by: Marek Vasut <marex@denx.de> Reported-by: Roman Guskov <rguskov@dh-electronics.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14x86/traps: Correct exc_general_protection() and math_error() return pathsThomas Tai
commit 632a1c209b8773cb0119fe3aada9f1db14fa357c upstream. Commit 334872a09198 ("x86/traps: Attempt to fixup exceptions in vDSO before signaling") added return statements which bypass calling cond_local_irq_disable(). According to ca4c6a9858c2 ("x86/traps: Make interrupt enable/disable symmetric in C code"), cond_local_irq_disable() is needed because the asm return code no longer disables interrupts. Follow the existing code as an example to use "goto exit" instead of "return" statement. [ bp: Massage commit message. ] Fixes: 334872a09198 ("x86/traps: Attempt to fixup exceptions in vDSO before signaling") Signed-off-by: Thomas Tai <thomas.tai@oracle.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Link: https://lkml.kernel.org/r/1617902914-83245-1-git-send-email-thomas.tai@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14net: sched: bump refcount for new action in ACT replace modeKumar Kartikeya Dwivedi
commit 6855e8213e06efcaf7c02a15e12b1ae64b9a7149 upstream. Currently, action creation using ACT API in replace mode is buggy. When invoking for non-existent action index 42, tc action replace action bpf obj foo.o sec <xyz> index 42 kernel creates the action, fills up the netlink response, and then just deletes the action after notifying userspace. tc action show action bpf doesn't list the action. This happens due to the following sequence when ovr = 1 (replace mode) is enabled: tcf_idr_check_alloc is used to atomically check and either obtain reference for existing action at index, or reserve the index slot using a dummy entry (ERR_PTR(-EBUSY)). This is necessary as pointers to these actions will be held after dropping the idrinfo lock, so bumping the reference count is necessary as we need to insert the actions, and notify userspace by dumping their attributes. Finally, we drop the reference we took using the tcf_action_put_many call in tcf_action_add. However, for the case where a new action is created due to free index, its refcount remains one. This when paired with the put_many call leads to the kernel setting up the action, notifying userspace of its creation, and then tearing it down. For existing actions, the refcount is still held so they remain unaffected. Fortunately due to rtnl_lock serialization requirement, such an action with refcount == 1 will not be concurrently deleted by anything else, at best CLS API can move its refcount up and down by binding to it after it has been published from tcf_idr_insert_many. Since refcount is atleast one until put_many call, CLS API cannot delete it. Also __tcf_action_put release path already ensures deterministic outcome (either new action will be created or existing action will be reused in case CLS API tries to bind to action concurrently) due to idr lock serialization. We fix this by making refcount of newly created actions as 2 in ACT API replace mode. A relaxed store will suffice as visibility is ensured only after the tcf_idr_insert_many call. Note that in case of creation or overwriting using CLS API only (i.e. bind = 1), overwriting existing action object is not allowed, and any such request is silently ignored (without error). The refcount bump that occurs in tcf_idr_check_alloc call there for existing action will pair with tcf_exts_destroy call made from the owner module for the same action. In case of action creation, there is no existing action, so no tcf_exts_destroy callback happens. This means no code changes for CLS API. Fixes: cae422f379f3 ("net: sched: use reference counting action init") Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14dt-bindings: net: ethernet-controller: fix typo in NVMEMRafał Miłecki
commit af9d316f3dd6d1385fbd1631b5103e620fc4298a upstream. The correct property name is "nvmem-cell-names". This is what: 1. Was originally documented in the ethernet.txt 2. Is used in DTS files 3. Matches standard syntax for phandles 4. Linux net subsystem checks for Fixes: 9d3de3c58347 ("dt-bindings: net: Add YAML schemas for the generic Ethernet options") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14lockdep: Address clang -Wformat warning printing for %hdArnd Bergmann
commit 6d48b7912cc72275dc7c59ff961c8bac7ef66a92 upstream. Clang doesn't like format strings that truncate a 32-bit value to something shorter: kernel/locking/lockdep.c:709:4: error: format specifies type 'short' but the argument has type 'int' [-Werror,-Wformat] In this case, the warning is a slightly questionable, as it could realize that both class->wait_type_outer and class->wait_type_inner are in fact 8-bit struct members, even though the result of the ?: operator becomes an 'int'. However, there is really no point in printing the number as a 16-bit 'short' rather than either an 8-bit or 32-bit number, so just change it to a normal %d. Fixes: de8f5e4f2dc1 ("lockdep: Introduce wait-type checks") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20210322115531.3987555-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14clk: socfpga: fix iomem pointer cast on 64-bitKrzysztof Kozlowski
commit 2867b9746cef78745c594894aece6f8ef826e0b4 upstream. Pointers should be cast with uintptr_t instead of integer. This fixes warning when compile testing on ARM64: drivers/clk/socfpga/clk-gate.c: In function ‘socfpga_clk_recalc_rate’: drivers/clk/socfpga/clk-gate.c:102:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Fixes: b7cec13f082f ("clk: socfpga: Look for the GPIO_DB_CLK by its offset") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20210314110709.32599-1-krzysztof.kozlowski@canonical.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14RAS/CEC: Correct ce_add_elem()'s returned valuesWilliam Roche
commit 3a62583c2853b0ab37a57dde79decea210b5fb89 upstream. ce_add_elem() uses different return values to signal a result from adding an element to the collector. Commit in Fixes: broke the case where the element being added is not found in the array. Correct that. [ bp: Rewrite commit message, add kernel-doc comments. ] Fixes: de0e0624d86f ("RAS/CEC: Check count_threshold unconditionally") Signed-off-by: William Roche <william.roche@oracle.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/1617722939-29670-1-git-send-email-william.roche@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14vdpa/mlx5: Fix wrong use of bit numbersEli Cohen
[ Upstream commit 4b454a82418dd76d8c0590bb3f7a99a63ea57dc5 ] VIRTIO_F_VERSION_1 is a bit number. Use BIT_ULL() with mask conditionals. Also, in mlx5_vdpa_is_little_endian() use BIT_ULL for consistency with the rest of the code. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210408091047.4269-5-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14vdpa/mlx5: should exclude header length and fcs from mtuSi-Wei Liu
[ Upstream commit d084d996aaf53c0cc583dc75a4fc2a67fe485846 ] When feature VIRTIO_NET_F_MTU is negotiated on mlx5_vdpa, 22 extra bytes worth of MTU length is shown in guest. This is because the mlx5_query_port_max_mtu API returns the "hardware" MTU value, which does not just contain the Ethernet payload, but includes extra lengths starting from the Ethernet header up to the FCS altogether. Fix the MTU so packets won't get dropped silently. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210408091047.4269-2-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14RDMA/addr: Be strict with gid sizeLeon Romanovsky
[ Upstream commit d1c803a9ccd7bd3aff5e989ccfb39ed3b799b975 ] The nla_len() is less than or equal to 16. If it's less than 16 then end of the "gid" buffer is uninitialized. Fixes: ae43f8286730 ("IB/core: Add IP to GID netlink offload") Link: https://lore.kernel.org/r/20210405074434.264221-1-leon@kernel.org Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14i40e: Fix parameters in aq_get_phy_register()Grzegorz Siwik
[ Upstream commit b2d0efc4be7ed320e33eaa9b6dd6f3f6011ffb8e ] Change parameters order in aq_get_phy_register() due to wrong statistics in PHY reported by ethtool. Previously all PHY statistics were exactly the same for all interfaces Now statistics are reported correctly - different for different interfaces Fixes: 0514db37dd78 ("i40e: Extend PHY access with page change flag") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14drm/vc4: crtc: Reduce PV fifo threshold on hvs4Dom Cobley
[ Upstream commit eb9dfdd1ed40357b99a4201c8534c58c562e48c9 ] Experimentally have found PV on hvs4 reports fifo full error with expected settings and does not with one less This appears as: [drm:drm_atomic_helper_wait_for_flip_done] *ERROR* [CRTC:82:crtc-3] flip_done timed out with bit 10 of PV_STAT set "HVS driving pixels when the PV FIFO is full" Fixes: c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.") Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161328.1471556-3-maxime@cerno.tech Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14RDMA/qedr: Fix kernel panic when trying to access recv_cqKamal Heib
[ Upstream commit e1ad897b9c738d5550be6762bf3a6ef1672259a4 ] As INI QP does not require a recv_cq, avoid the following null pointer dereference by checking if the qp_type is not INI before trying to extract the recv_cq. BUG: kernel NULL pointer dereference, address: 00000000000000e0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 54250 Comm: mpitests-IMB-MP Not tainted 5.12.0-rc5 #1 Hardware name: Dell Inc. PowerEdge R320/0KM5PX, BIOS 2.7.0 08/19/2019 RIP: 0010:qedr_create_qp+0x378/0x820 [qedr] Code: 02 00 00 50 e8 29 d4 a9 d1 48 83 c4 18 e9 65 fe ff ff 48 8b 53 10 48 8b 43 18 44 8b 82 e0 00 00 00 45 85 c0 0f 84 10 74 00 00 <8b> b8 e0 00 00 00 85 ff 0f 85 50 fd ff ff e9 fd 73 00 00 48 8d bd RSP: 0018:ffff9c8f056f7a70 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff9c8f056f7b58 RCX: 0000000000000009 RDX: ffff8c41a9744c00 RSI: ffff9c8f056f7b58 RDI: ffff8c41c0dfa280 RBP: ffff8c41c0dfa280 R08: 0000000000000002 R09: 0000000000000001 R10: 0000000000000000 R11: ffff8c41e06fc608 R12: ffff8c4194052000 R13: 0000000000000000 R14: ffff8c4191546070 R15: ffff8c41c0dfa280 FS: 00007f78b2787b80(0000) GS:ffff8c43a3200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000e0 CR3: 00000001011d6002 CR4: 00000000001706f0 Call Trace: ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x4e4/0xb90 [ib_uverbs] ? ib_uverbs_cq_event_handler+0x30/0x30 [ib_uverbs] ib_uverbs_run_method+0x6f6/0x7a0 [ib_uverbs] ? ib_uverbs_handler_UVERBS_METHOD_QP_DESTROY+0x70/0x70 [ib_uverbs] ? __cond_resched+0x15/0x30 ? __kmalloc+0x5a/0x440 ib_uverbs_cmd_verbs+0x195/0x360 [ib_uverbs] ? xa_load+0x6e/0x90 ? cred_has_capability+0x7c/0x130 ? avc_has_extended_perms+0x17f/0x440 ? vma_link+0xae/0xb0 ? vma_set_page_prot+0x2a/0x60 ? mmap_region+0x298/0x6c0 ? do_mmap+0x373/0x520 ? selinux_file_ioctl+0x17f/0x220 ib_uverbs_ioctl+0xa7/0x110 [ib_uverbs] __x64_sys_ioctl+0x84/0xc0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f78b120262b Fixes: 06e8d1df46ed ("RDMA/qedr: Add support for user mode XRC-SRQ's") Link: https://lore.kernel.org/r/20210404125501.154789-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14perf report: Fix wrong LBR block sortingJin Yao
[ Upstream commit f2013278ae40b89cc27916366c407ce5261815ef ] When '--total-cycles' is specified, it supports sorting for all blocks by 'Sampled Cycles%'. This is useful to concentrate on the globally hottest blocks. 'Sampled Cycles%' - block sampled cycles aggregation / total sampled cycles But in current code, it doesn't use the cycles aggregation. Part of 'cycles' counting is possibly dropped for some overlap jumps. But for identifying the hot block, we always need the full cycles. # perf record -b ./triad_loop # perf report --total-cycles --stdio Before: # # Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object # ............... .............. ........... .......... ............................................................. ................. # 0.81% 793 4.32% 793 [setup-vdso.h:34 -> setup-vdso.h:40] ld-2.27.so 0.49% 480 0.87% 160 [native_write_msr+0 -> native_write_msr+16] [kernel.kallsyms] 0.48% 476 0.52% 95 [native_read_msr+0 -> native_read_msr+29] [kernel.kallsyms] 0.31% 303 1.65% 303 [nmi_restore+0 -> nmi_restore+37] [kernel.kallsyms] 0.26% 255 1.39% 255 [nohz_balance_exit_idle+75 -> nohz_balance_exit_idle+162] [kernel.kallsyms] 0.24% 234 1.28% 234 [end_repeat_nmi+67 -> end_repeat_nmi+83] [kernel.kallsyms] 0.23% 227 1.24% 227 [__irqentry_text_end+96 -> __irqentry_text_end+126] [kernel.kallsyms] 0.20% 194 1.06% 194 [native_set_debugreg+52 -> native_set_debugreg+56] [kernel.kallsyms] 0.11% 106 0.14% 26 [native_sched_clock+0 -> native_sched_clock+98] [kernel.kallsyms] 0.10% 97 0.53% 97 [trigger_load_balance+0 -> trigger_load_balance+67] [kernel.kallsyms] 0.09% 85 0.46% 85 [get-dynamic-info.h:102 -> get-dynamic-info.h:111] ld-2.27.so ... 0.00% 92.7K 0.02% 4 [triad_loop.c:64 -> triad_loop.c:65] triad_loop The hottest block '[triad_loop.c:64 -> triad_loop.c:65]' is not at the top of output. After: # Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object # ............... .............. ........... .......... .............................................................. ................. # 94.35% 92.7K 0.02% 4 [triad_loop.c:64 -> triad_loop.c:65] triad_loop 0.81% 793 4.32% 793 [setup-vdso.h:34 -> setup-vdso.h:40] ld-2.27.so 0.49% 480 0.87% 160 [native_write_msr+0 -> native_write_msr+16] [kernel.kallsyms] 0.48% 476 0.52% 95 [native_read_msr+0 -> native_read_msr+29] [kernel.kallsyms] 0.31% 303 1.65% 303 [nmi_restore+0 -> nmi_restore+37] [kernel.kallsyms] 0.26% 255 1.39% 255 [nohz_balance_exit_idle+75 -> nohz_balance_exit_idle+162] [kernel.kallsyms] 0.24% 234 1.28% 234 [end_repeat_nmi+67 -> end_repeat_nmi+83] [kernel.kallsyms] 0.23% 227 1.24% 227 [__irqentry_text_end+96 -> __irqentry_text_end+126] [kernel.kallsyms] 0.20% 194 1.06% 194 [native_set_debugreg+52 -> native_set_debugreg+56] [kernel.kallsyms] 0.11% 106 0.14% 26 [native_sched_clock+0 -> native_sched_clock+98] [kernel.kallsyms] 0.10% 97 0.53% 97 [trigger_load_balance+0 -> trigger_load_balance+67] [kernel.kallsyms] 0.09% 85 0.46% 85 [get-dynamic-info.h:102 -> get-dynamic-info.h:111] ld-2.27.so 0.08% 82 0.06% 11 [intel_pmu_drain_pebs_nhm+580 -> intel_pmu_drain_pebs_nhm+627] [kernel.kallsyms] 0.08% 77 0.42% 77 [lru_add_drain_cpu+0 -> lru_add_drain_cpu+133] [kernel.kallsyms] 0.08% 74 0.10% 18 [handle_pmi_common+271 -> handle_pmi_common+310] [kernel.kallsyms] 0.08% 74 0.40% 74 [get-dynamic-info.h:131 -> get-dynamic-info.h:157] ld-2.27.so 0.07% 69 0.09% 17 [intel_pmu_drain_pebs_nhm+432 -> intel_pmu_drain_pebs_nhm+468] [kernel.kallsyms] Now the hottest block is reported at the top of output. Fixes: b65a7d372b1a55db ("perf hist: Support block formats with compare/sort/display") Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210407024452.29988-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14RDMA/cxgb4: check for ipv6 address properly while destroying listenerPotnuri Bharat Teja
[ Upstream commit 603c4690b01aaffe3a6c3605a429f6dac39852ae ] ipv6 bit is wrongly set by the below which causes fatal adapter lookup engine errors for ipv4 connections while destroying a listener. Fix it to properly check the local address for ipv6. Fixes: 3408be145a5d ("RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server") Link: https://lore.kernel.org/r/20210331135715.30072-1-bharat@chelsio.com Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14net/mlx5: Fix PBMC register mappingAya Levin
[ Upstream commit 534b1204ca4694db1093b15cf3e79a99fcb6a6da ] Add reserved mapping to cover all the register in order to avoid setting arbitrary values to newer FW which implements the reserved fields. Fixes: 50b4a3c23646 ("net/mlx5: PPTB and PBMC register firmware command support") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14net/mlx5: Fix PPLM register mappingAya Levin
[ Upstream commit ce28f0fd670ddffcd564ce7119bdefbaf08f02d3 ] Add reserved mapping to cover all the register in order to avoid setting arbitrary values to newer FW which implements the reserved fields. Fixes: a58837f52d43 ("net/mlx5e: Expose FEC feilds and related capability bit") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14net/mlx5: Fix placement of log_max_flow_counterRaed Salem
[ Upstream commit a14587dfc5ad2312dabdd42a610d80ecd0dc8bea ] The cited commit wrongly placed log_max_flow_counter field of mlx5_ifc_flow_table_prop_layout_bits, align it to the HW spec intended placement. Fixes: 16f1c5bb3ed7 ("net/mlx5: Check device capability for maximum flow counters") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14net/mlx5: Fix HW spec violation configuring uplinkEli Cohen
[ Upstream commit 1a73704c82ed4ee95532ac04645d02075bd1ce3d ] Make sure to modify uplink port to follow only if the uplink_follow capability is set as required by the HW spec. Failure to do so causes traffic to the uplink representor net device to cease after switching to switchdev mode. Fixes: 7d0314b11cdd ("net/mlx5e: Modify uplink state on interface up/down") Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14net: hns3: clear VF down state bit before request link statusGuangbin Huang
[ Upstream commit ed7bedd2c3ca040f1e8ea02c6590a93116b1ec78 ] Currently, the VF down state bit is cleared after VF sending link status request command. There is problem that when VF gets link status replied from PF, the down state bit may still set as 1. In this case, the link status replied from PF will be ignored and always set VF link status to down. To fix this problem, clear VF down state bit before VF requests link status. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14tipc: increment the tmp aead refcnt before attaching itXin Long
[ Upstream commit 2a2403ca3add03f542f6b34bef9f74649969b06d ] Li Shuang found a NULL pointer dereference crash in her testing: [] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [] RIP: 0010:tipc_crypto_rcv_complete+0xc8/0x7e0 [tipc] [] Call Trace: [] <IRQ> [] tipc_crypto_rcv+0x2d9/0x8f0 [tipc] [] tipc_rcv+0x2fc/0x1120 [tipc] [] tipc_udp_recv+0xc6/0x1e0 [tipc] [] udpv6_queue_rcv_one_skb+0x16a/0x460 [] udp6_unicast_rcv_skb.isra.35+0x41/0xa0 [] ip6_protocol_deliver_rcu+0x23b/0x4c0 [] ip6_input+0x3d/0xb0 [] ipv6_rcv+0x395/0x510 [] __netif_receive_skb_core+0x5fc/0xc40 This is caused by NULL returned by tipc_aead_get(), and then crashed when dereferencing it later in tipc_crypto_rcv_complete(). This might happen when tipc_crypto_rcv_complete() is called by two threads at the same time: the tmp attached by tipc_crypto_key_attach() in one thread may be released by the one attached by that in the other thread. This patch is to fix it by incrementing the tmp's refcnt before attaching it instead of calling tipc_aead_get() after attaching it. Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication") Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14platform/x86: intel-hid: Fix spurious wakeups caused by tablet-mode events ↵Hans de Goede
during suspend [ Upstream commit a3790a8a94fc0234c5d38013b48e74ef221ec84c ] Some devices send (duplicate) tablet-mode events when moved around even though the mode has not changed; and they do this even when suspended. Change the tablet-mode event handling when priv->wakeup_mode is set to update the switch state in case it changed and then return immediately (without calling pm_wakeup_hard_event()) to avoid spurious wakeups. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212537 Fixes: 537b0dd4729e ("platform/x86: intel-hid: Add support for SW_TABLET_MODE") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Elia Devito <eliadevito@gmail.com> Link: https://lore.kernel.org/r/20210404143831.25173-1-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14can: mcp251x: fix support for half duplex SPI host controllersMarc Kleine-Budde
[ Upstream commit 617085fca6375e2c1667d1fbfc6adc4034c85f04 ] Some SPI host controllers do not support full-duplex SPI transfers. The function mcp251x_spi_trans() does a full duplex transfer. It is used in several places in the driver, where a TX half duplex transfer is sufficient. To fix support for half duplex SPI host controllers, this patch introduces a new function mcp251x_spi_write() and changes all callers that do a TX half duplex transfer to use mcp251x_spi_write(). Fixes: e0e25001d088 ("can: mcp251x: add support for half duplex controllers") Link: https://lore.kernel.org/r/20210330100246.1074375-1-mkl@pengutronix.de Cc: Tim Harvey <tharvey@gateworks.com> Tested-By: Tim Harvey <tharvey@gateworks.com> Reported-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14iwlwifi: fix 11ax disabled bit in the regulatory capability flagsLuca Coelho
[ Upstream commit 07cc40fec9a85e669ea12e161a438d2cbd76f1ed ] When version 2 of the regulatory capability flags API was implemented, the flag to disable 11ax was defined as bit 13, but this was later changed and the bit remained as bit 10, like in version 1. This was never changed in the driver, so we were checking for the wrong bit in newer devices. Fix it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Fixes: e27c506a985c ("iwlwifi: regulatory: regulatory capabilities api change") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210326125611.6d28516b59cd.Id0248d5e4662695254f49ce37b0268834ed52918@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14i2c: designware: Adjust bus_freq_hz when refuse high speed mode setAndy Shevchenko
[ Upstream commit 5e729bc54bda705f64941008b018b4e41a4322bf ] When hardware doesn't support High Speed Mode, we forget bus_freq_hz timing adjustment. This makes the timings and real registers being unsynchronized. Adjust bus_freq_hz when refuse high speed mode set. Fixes: b6e67145f149 ("i2c: designware: Enable high speed mode") Reported-by: "Song Bao Hua (Barry Song)" <song.bao.hua@hisilicon.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14openvswitch: fix send of uninitialized stack memory in ct limit replyIlya Maximets
[ Upstream commit 4d51419d49930be2701c2633ae271b350397c3ca ] 'struct ovs_zone_limit' has more members than initialized in ovs_ct_limit_get_default_limit(). The rest of the memory is a random kernel stack content that ends up being sent to userspace. Fix that by using designated initializer that will clear all non-specified fields. Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit") Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Acked-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14perf inject: Fix repipe usageAdrian Hunter
[ Upstream commit 026334a3bb6a3919b42aba9fc11843db2b77fd41 ] Since commit 14d3d54052539a1e ("perf session: Try to read pipe data from file") 'perf inject' has started printing "PERFILE2h" when not processing pipes. The commit exposed perf to the possiblity that the input is not a pipe but the 'repipe' parameter gets used. That causes the printing because perf inject sets 'repipe' to true always. The 'repipe' parameter of perf_session__new() is used by 2 functions: - perf_file_header__read_pipe() - trace_report() In both cases, the functions copy data to STDOUT_FILENO when 'repipe' is true. Fix by setting 'repipe' to true only if the output is a pipe. Fixes: e558a5bd8b74aff4 ("perf inject: Work with files") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andrew Vagin <avagin@openvz.org> Link: http://lore.kernel.org/lkml/20210401103605.9000-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14s390/cpcmd: fix inline assembly register clobberingAlexander Gordeev
[ Upstream commit 7a2f91441b2c1d81b77c1cd816a4659f4abc9cbe ] Register variables initialized using arithmetic. That leads to kasan instrumentaton code corrupting the registers contents. Follow GCC guidlines and use temporary variables for assigning init values to register variables. Fixes: 94c12cc7d196 ("[S390] Inline assembly cleanup.") Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://gcc.gnu.org/onlinedocs/gcc-10.2.0/gcc/Local-Register-Variables.html Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14workqueue: Move the position of debug_work_activate() in __queue_work()Zqiang
[ Upstream commit 0687c66b5f666b5ad433f4e94251590d9bc9d10e ] The debug_work_activate() is called on the premise that the work can be inserted, because if wq be in WQ_DRAINING status, insert work may be failed. Fixes: e41e704bc4f4 ("workqueue: improve destroy_workqueue() debuggability") Signed-off-by: Zqiang <qiang.zhang@windriver.com> Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14clk: fix invalid usage of list cursor in unregisterLukasz Bartosik
[ Upstream commit 7045465500e465b09f09d6e5bdc260a9f1aab97b ] Fix invalid usage of a list_for_each_entry cursor in clk_notifier_unregister(). When list is empty or if the list is completely traversed (without breaking from the loop on one of the entries) then the list cursor does not point to a valid entry and therefore should not be used. The patch fixes a logical bug that hasn't been seen in pratice however it is analogus to the bug fixed in clk_notifier_register(). The issue was dicovered when running 5.12-rc1 kernel on x86_64 with KASAN enabled: BUG: KASAN: global-out-of-bounds in clk_notifier_register+0xab/0x230 Read of size 8 at addr ffffffffa0d10588 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1 #1 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.430.0 07/20/2018 Call Trace: dump_stack+0xee/0x15c print_address_description+0x1e/0x2dc kasan_report+0x188/0x1ce ? clk_notifier_register+0xab/0x230 ? clk_prepare_lock+0x15/0x7b ? clk_notifier_register+0xab/0x230 clk_notifier_register+0xab/0x230 dw8250_probe+0xc01/0x10d4 ... Memory state around the buggy address: ffffffffa0d10480: 00 00 00 00 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 >ffffffffa0d10580: f9 f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffffffa0d10600: 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10680: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ================================================================== Fixes: b2476490ef11 ("clk: introduce the common clock framework") Reported-by: Lukasz Majczak <lma@semihalf.com> Signed-off-by: Lukasz Bartosik <lb@semihalf.com> Link: https://lore.kernel.org/r/20210401225149.18826-2-lb@semihalf.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14clk: fix invalid usage of list cursor in registerLukasz Bartosik
[ Upstream commit 8d3c0c01cb2e36b2bf3c06a82b18b228d0c8f5d0 ] Fix invalid usage of a list_for_each_entry cursor in clk_notifier_register(). When list is empty or if the list is completely traversed (without breaking from the loop on one of the entries) then the list cursor does not point to a valid entry and therefore should not be used. The issue was dicovered when running 5.12-rc1 kernel on x86_64 with KASAN enabled: BUG: KASAN: global-out-of-bounds in clk_notifier_register+0xab/0x230 Read of size 8 at addr ffffffffa0d10588 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1 #1 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.430.0 07/20/2018 Call Trace: dump_stack+0xee/0x15c print_address_description+0x1e/0x2dc kasan_report+0x188/0x1ce ? clk_notifier_register+0xab/0x230 ? clk_prepare_lock+0x15/0x7b ? clk_notifier_register+0xab/0x230 clk_notifier_register+0xab/0x230 dw8250_probe+0xc01/0x10d4 ... Memory state around the buggy address: ffffffffa0d10480: 00 00 00 00 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 >ffffffffa0d10580: f9 f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffffffa0d10600: 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10680: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ================================================================== Fixes: b2476490ef11 ("clk: introduce the common clock framework") Reported-by: Lukasz Majczak <lma@semihalf.com> Signed-off-by: Lukasz Bartosik <lb@semihalf.com> Link: https://lore.kernel.org/r/20210401225149.18826-1-lb@semihalf.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14net: macb: restore cmp registers on resume pathClaudiu Beznea
[ Upstream commit a14d273ba15968495896a38b7b3399dba66d0270 ] Restore CMP screener registers on resume path. Fixes: c1e85c6ce57ef ("net: macb: save/restore the remaining registers and features") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14net: cls_api: Fix uninitialised struct field bo->unlocked_driver_cbYunjian Wang
[ Upstream commit 990b03b05b2fba79de2a1ee9dc359fc552d95ba6 ] The 'unlocked_driver_cb' struct field in 'bo' is not being initialized in tcf_block_offload_init(). The uninitialized 'unlocked_driver_cb' will be used when calling unlocked_driver_cb(). So initialize 'bo' to zero to avoid the issue. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 0fdcf78d5973 ("net: use flow_indr_dev_setup_offload()") Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14ARM: dts: turris-omnia: fix hardware buffer managementRui Salvaterra
[ Upstream commit 5b2c7e0ae762fff2b172caf16b2766cc3e1ad859 ] Hardware buffer management has never worked on the Turris Omnia, as the required MBus window hadn't been reserved. Fix thusly. Fixes: 018b88eee1a2 ("ARM: dts: turris-omnia: enable HW buffer management") Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Reviewed-by: Marek Behún <kabel@kernel.org> Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14Revert "arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts"Gregory CLEMENT
[ Upstream commit 967ff33eb0efcd48e4df11ab9aee51c41e0f44d0 ] The driver part of this support was not merged which leads to break AHCI on all Marvell Armada 7k8k / CN913x platforms as it was reported by Marcin Wojtas. So for now let's remove it in order to fix the issue waiting for the driver part really be merged. This reverts commit 53e950d597e3578da84238b86424bfcc9e101d87. Fixes: 53e950d597e3 ("arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts") Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14drm/msm/disp/dpu1: program 3d_merge only if block is attachedKalyan Thota
[ Upstream commit 12aca1ce9ee33af3751aec5e55a5900747cbdd4b ] Update the 3d merge as active in the data path only if the hw block is selected in the configuration. Reported-by: Stephen Boyd <swboyd@chromium.org> Fixes: 73bfb790ac78 ("msm:disp:dpu1: setup display datapath for SC7180 target") Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org> Message-Id: <1617364493-13518-1-git-send-email-kalyan_t@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-18 20:50:51 +0000