summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-08-15io_uring: fix an issue when IOSQE_IO_LINK is inserted into defer listfor-linus-2019-08-17Jackie Liu
This patch may fix two issues: First, when IOSQE_IO_DRAIN set, the next IOs need to be inserted into defer list to delay execution, but link io will be actively scheduled to run by calling io_queue_sqe. Second, when multiple LINK_IOs are inserted together with defer_list, the LINK_IO is no longer keep order. |-------------| | LINK_IO | ----> insert to defer_list ----------- |-------------| | | LINK_IO | ----> insert to defer_list ----------| |-------------| | | LINK_IO | ----> insert to defer_list ----------| |-------------| | | NORMAL_IO | ----> insert to defer_list ----------| |-------------| | | queue_work at same time <-----| Fixes: 9e645e1105c ("io_uring: add support for sqe links") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-15block: remove REQ_NOWAIT_INLINEJens Axboe
We had a few issues with this code, and there's still a problem around how we deal with error handling for chained/split bios. For now, just revert the code and we'll try again with a thoroug solution. This reverts commits: e15c2ffa1091 ("block: fix O_DIRECT error handling for bio fragments") 0eb6ddfb865c ("block: Fix __blkdev_direct_IO() for bio fragments") 6a43074e2f46 ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO") 893a1c97205a ("blk-mq: allow REQ_NOWAIT to return an error inline") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-15io_uring: fix manual setup of iov_iter for fixed buffersAleix Roca Nonell
Commit bd11b3a391e3 ("io_uring: don't use iov_iter_advance() for fixed buffers") introduced an optimization to avoid using the slow iov_iter_advance by manually populating the iov_iter iterator in some cases. However, the computation of the iterator count field was erroneous: The first bvec was always accounted for an extent of page size even if the bvec length was smaller. In consequence, some I/O operations on fixed buffers were unable to operate on the full extent of the buffer, consistently skipping some bytes at the end of it. Fixes: bd11b3a391e3 ("io_uring: don't use iov_iter_advance() for fixed buffers") Cc: stable@vger.kernel.org Signed-off-by: Aleix Roca Nonell <aleix.rocanonell@bsc.es> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-12xen/blkback: fix memory leaksWenwen Wang
In read_per_ring_refs(), after 'req' and related memory regions are allocated, xen_blkif_map() is invoked to map the shared frame, irq, and etc. However, if this mapping process fails, no cleanup is performed, leading to memory leaks. To fix this issue, invoke the cleanup before returning the error. Acked-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-12blk-mq: move cancel of requeue_work to the front of blk_exit_queuezhengbin
blk_exit_queue will free elevator_data, while blk_mq_requeue_work will access it. Move cancel of requeue_work to the front of blk_exit_queue to avoid use-after-free. blk_exit_queue blk_mq_requeue_work __elevator_exit blk_mq_run_hw_queues blk_mq_exit_sched blk_mq_run_hw_queue dd_exit_queue blk_mq_hctx_has_pending kfree(elevator_data) blk_mq_sched_has_work dd_has_work Fixes: fbc2a15e3433 ("blk-mq: move cancel of requeue_work into blk_mq_release") Cc: stable@vger.kernel.org Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-10Merge branch 'nvme-5.3-rc' of git://git.infradead.org/nvme into for-linusJens Axboe
Pull NVMe fixes from Sagi: "Few nvme fixes for the next rc round. - detect capacity changes on the mpath disk from Anthony - probe/remove fix from Keith - various fixes to pass blktests from Logan - deadlock in reset/scan race fix - nvme-rdma use-after-free fix - deadlock fix when passthru commands race mpath disk info update" * 'nvme-5.3-rc' of git://git.infradead.org/nvme: nvme-pci: Fix async probe remove race nvme: fix controller removal race with scan work nvme-rdma: fix possible use-after-free in connect error flow nvme: fix a possible deadlock when passthru commands sent to a multipath device nvme-core: Fix extra device_put() call on error path nvmet-file: fix nvmet_file_flush() always returning an error nvmet-loop: Flush nvme_delete_wq when removing the port nvmet: Fix use-after-free bug when a port is removed nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns
2019-08-09bcache: Revert "bcache: use sysfs_match_string() instead of ↵for-linus-20190809Coly Li
__sysfs_match_string()" This reverts commit 89e0341af082dbc170019f908846f4a424efc86b. In drivers/md/bcache/sysfs.c:bch_snprint_string_list(), NULL pointer at the end of list is necessary. Remove the NULL from last element of each lists will cause the following panic, [ 4340.455652] bcache: register_cache() registered cache device nvme0n1 [ 4340.464603] bcache: register_bdev() registered backing device sdk [ 4421.587335] bcache: bch_cached_dev_run() cached dev sdk is running already [ 4421.587348] bcache: bch_cached_dev_attach() Caching sdk as bcache0 on set 354e1d46-d99f-4d8b-870b-078b80dc88a6 [ 5139.247950] general protection fault: 0000 [#1] SMP NOPTI [ 5139.247970] CPU: 9 PID: 5896 Comm: cat Not tainted 4.12.14-95.29-default #1 SLE12-SP4 [ 5139.247988] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 04/18/2019 [ 5139.248006] task: ffff888fb25c0b00 task.stack: ffff9bbacc704000 [ 5139.248021] RIP: 0010:string+0x21/0x70 [ 5139.248030] RSP: 0018:ffff9bbacc707bf0 EFLAGS: 00010286 [ 5139.248043] RAX: ffffffffa7e432e3 RBX: ffff8881c20da02a RCX: ffff0a00ffffff04 [ 5139.248058] RDX: 3f00656863616362 RSI: ffff8881c20db000 RDI: ffffffffffffffff [ 5139.248075] RBP: ffff8881c20db000 R08: 0000000000000000 R09: ffff8881c20da02a [ 5139.248090] R10: 0000000000000004 R11: 0000000000000000 R12: ffff9bbacc707c48 [ 5139.248104] R13: 0000000000000fd6 R14: ffffffffc0665855 R15: ffffffffc0665855 [ 5139.248119] FS: 00007faf253b8700(0000) GS:ffff88903f840000(0000) knlGS:0000000000000000 [ 5139.248137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5139.248149] CR2: 00007faf25395008 CR3: 0000000f72150006 CR4: 00000000007606e0 [ 5139.248164] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5139.248179] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5139.248193] PKRU: 55555554 [ 5139.248200] Call Trace: [ 5139.248210] vsnprintf+0x1fb/0x510 [ 5139.248221] snprintf+0x39/0x40 [ 5139.248238] bch_snprint_string_list.constprop.15+0x5b/0x90 [bcache] [ 5139.248256] __bch_cached_dev_show+0x44d/0x5f0 [bcache] [ 5139.248270] ? __alloc_pages_nodemask+0xb2/0x210 [ 5139.248284] bch_cached_dev_show+0x2c/0x50 [bcache] [ 5139.248297] sysfs_kf_seq_show+0xbb/0x190 [ 5139.248308] seq_read+0xfc/0x3c0 [ 5139.248317] __vfs_read+0x26/0x140 [ 5139.248327] vfs_read+0x87/0x130 [ 5139.248336] SyS_read+0x42/0x90 [ 5139.248346] do_syscall_64+0x74/0x160 [ 5139.248358] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 5139.248370] RIP: 0033:0x7faf24eea370 [ 5139.248379] RSP: 002b:00007fff82d03f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 5139.248395] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007faf24eea370 [ 5139.248411] RDX: 0000000000020000 RSI: 00007faf25396000 RDI: 0000000000000003 [ 5139.248426] RBP: 00007faf25396000 R08: 00000000ffffffff R09: 0000000000000000 [ 5139.248441] R10: 000000007c9d4d41 R11: 0000000000000246 R12: 00007faf25396000 [ 5139.248456] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000fff [ 5139.248892] Code: ff ff ff 0f 1f 80 00 00 00 00 49 89 f9 48 89 cf 48 c7 c0 e3 32 e4 a7 48 c1 ff 30 48 81 fa ff 0f 00 00 48 0f 46 d0 48 85 ff 74 45 <44> 0f b6 02 48 8d 42 01 45 84 c0 74 38 48 01 fa 4c 89 cf eb 0e The simplest way to fix is to revert commit 89e0341af082 ("bcache: use sysfs_match_string() instead of __sysfs_match_string()"). This bug was introduced in Linux v5.2, so this fix only applies to Linux v5.2 is enough for stable tree maintainer. Fixes: 89e0341af082 ("bcache: use sysfs_match_string() instead of __sysfs_match_string()") Cc: stable@vger.kernel.org Cc: Alexandru Ardelean <alexandru.ardelean@analog.com> Reported-by: Peifeng Lin <pflin@suse.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-08loop: set PF_MEMALLOC_NOIO for the worker threadMikulas Patocka
A deadlock with this stacktrace was observed. The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio shrinker and the shrinker depends on I/O completion in the dm-bufio subsystem. In order to fix the deadlock (and other similar ones), we set the flag PF_MEMALLOC_NOIO at loop thread entry. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1" #0 [ffff88272f5af228] __schedule at ffffffff8173f405 #1 [ffff88272f5af280] schedule at ffffffff8173fa27 #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5 #4 [ffff88272f5af330] mutex_lock at ffffffff81742133 #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio] #6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd #7 [ffff88272f5af470] shrink_zone at ffffffff811ad778 #8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34 #9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8 #10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3 #11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71 #12 [ffff88272f5af760] new_slab at ffffffff811f4523 #13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5 #14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b #15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3 #16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3 #17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs] #18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994 #19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs] #20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop] #21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop] #22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c #23 [ffff88272f5afec0] kthread at ffffffff810a8428 #24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-08bdev: Fixup error handling in blkdev_get()Jan Kara
Commit 89e524c04fa9 ("loop: Fix mount(2) failure due to race with LOOP_SET_FD") converted blkdev_get() to use the new helpers for finishing claiming of a block device. However the conversion botched the error handling in blkdev_get() and thus the bdev has been marked as held even in case __blkdev_get() returned error. This led to occasional warnings with block/001 test from blktests like: kernel: WARNING: CPU: 5 PID: 907 at fs/block_dev.c:1899 __blkdev_put+0x396/0x3a0 Correct the error handling. CC: stable@vger.kernel.org Fixes: 89e524c04fa9 ("loop: Fix mount(2) failure due to race with LOOP_SET_FD") Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-08block, bfq: handle NULL return value by bfq_init_rq()Paolo Valente
As reported in [1], the call bfq_init_rq(rq) may return NULL in case of OOM (in particular, if rq->elv.icq is NULL because memory allocation failed in failed in ioc_create_icq()). This commit handles this circumstance. [1] https://lkml.org/lkml/2019/7/22/824 Cc: Hsin-Yi Wang <hsinyi@google.com> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Hsin-Yi Wang <hsinyi@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-08block, bfq: move update of waker and woken list to queue freeingPaolo Valente
Since commit 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O"), every bfq_queue has a pointer to a waker bfq_queue and a list of the bfq_queues it may wake. In this respect, when a bfq_queue, say Q, remains with no I/O source attached to it, Q cannot be woken by any other bfq_queue, and cannot wake any other bfq_queue. Then Q must be removed from the woken list of its possible waker bfq_queue, and all bfq_queues in the woken list of Q must stop having a waker bfq_queue. Q remains with no I/O source in two cases: when the last process associated with Q exits or when such a process gets associated with a different bfq_queue. Unfortunately, commit 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O") performed the above updates only in the first case. This commit fixes this bug by moving these updates to when Q gets freed. This is a simple and safe way to handle all cases, as both the above events, process exit and re-association, lead to Q being freed soon, and because dangling references would come out only after Q gets freed (if no update were performed). Fixes: 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O") Reported-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-08block, bfq: reset last_completed_rq_bfqq if the pointed queue is freedPaolo Valente
Since commit 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O"), BFQ stores, in a per-device pointer last_completed_rq_bfqq, the last bfq_queue that had an I/O request completed. If some bfq_queue receives new I/O right after the last request of last_completed_rq_bfqq has been completed, then last_completed_rq_bfqq may be a waker bfq_queue. But if the bfq_queue last_completed_rq_bfqq points to is freed, then last_completed_rq_bfqq becomes a dangling reference. This commit resets last_completed_rq_bfqq if the pointed bfq_queue is freed. Fixes: 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O") Reported-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-08block: aoe: Fix kernel crash due to atomic sleep when exitingHe Zhe
Since commit 3582dd291788 ("aoe: convert aoeblk to blk-mq"), aoedev_downdev has had the possibility of sleeping and causing the following crash. BUG: scheduling while atomic: rmmod/2242/0x00000003 Modules linked in: aoe Preemption disabled at: [<ffffffffc01d95e5>] flush+0x95/0x4a0 [aoe] CPU: 7 PID: 2242 Comm: rmmod Tainted: G I 5.2.3 #1 Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.10.0025.030220091519 03/02/2009 Call Trace: dump_stack+0x4f/0x6a ? flush+0x95/0x4a0 [aoe] __schedule_bug.cold+0x44/0x54 __schedule+0x44f/0x680 schedule+0x44/0xd0 blk_mq_freeze_queue_wait+0x46/0xb0 ? wait_woken+0x80/0x80 blk_mq_freeze_queue+0x1b/0x20 aoedev_downdev+0x111/0x160 [aoe] flush+0xff/0x4a0 [aoe] aoedev_exit+0x23/0x30 [aoe] aoe_exit+0x35/0x948 [aoe] __se_sys_delete_module+0x183/0x210 __x64_sys_delete_module+0x16/0x20 do_syscall_64+0x4d/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f24e0043b07 Code: 73 01 c3 48 8b 0d 89 73 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 59 73 0b 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe18f7f1e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f24e0043b07 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000555c3ecf87c8 RBP: 00007ffe18f7f1f0 R08: 0000000000000000 R09: 0000000000000000 R10: 00007f24e00b4ac0 R11: 0000000000000206 R12: 00007ffe18f7f238 R13: 00007ffe18f7f410 R14: 00007ffe18f80e73 R15: 0000555c3ecf8760 This patch, handling in the same way of pass two, unlocks the locks and restart pass one after aoedev_downdev is done. Fixes: 3582dd291788 ("aoe: convert aoeblk to blk-mq") Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-07libata: add SG safety checks in SFF pio transfersJens Axboe
Abort processing of a command if we run out of mapped data in the SG list. This should never happen, but a previous bug caused it to be possible. Play it safe and attempt to abort nicely if we don't have more SG segments left. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-07libata: have ata_scsi_rw_xlat() fail invalid passthrough requestsJens Axboe
For passthrough requests, libata-scsi takes what the user passes in as gospel. This can be problematic if the user fills in the CDB incorrectly. One example of that is in request sizes. For read/write commands, the CDB contains fields describing the transfer length of the request. These should match with the SG_IO header fields, but libata-scsi currently does no validation of that. Check that the number of blocks in the CDB for passthrough requests matches what was mapped into the request. If the CDB asks for more data then the validated SG_IO header fields, error it. Reported-by: Krishna Ram Prakash R <krp@gtux.in> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-07block: fix O_DIRECT error handling for bio fragmentsJens Axboe
0eb6ddfb865c tried to fix this up, but introduced a use-after-free of dio. Additionally, we still had an issue with error handling, as reported by Darrick: "I noticed a regression in xfs/747 (an unreleased xfstest for the xfs_scrub media scanning feature) on 5.3-rc3. I'll condense that down to a simpler reproducer: error-test: 0 209 linear 8:48 0 error-test: 209 1 error error-test: 210 6446894 linear 8:48 210 Basically we have a ~3G /dev/sdd and we set up device mapper to fail IO for sector 209 and to pass the io to the scsi device everywhere else. On 5.3-rc3, performing a directio pread of this range with a < 1M buffer (in other words, a request for fewer than MAX_BIO_PAGES bytes) yields EIO like you'd expect: pread64(3, 0x7f880e1c7000, 1048576, 0) = -1 EIO (Input/output error) pread: Input/output error +++ exited with 0 +++ But doing it with a larger buffer succeeds(!): pread64(3, "XFSB\0\0\20\0\0\0\0\0\0\fL\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1146880, 0) = 1146880 read 1146880/1146880 bytes at offset 0 1 MiB, 1 ops; 0.0009 sec (1.124 GiB/sec and 1052.6316 ops/sec) +++ exited with 0 +++ (Note that the part of the buffer corresponding to the dm-error area is uninitialized) On 5.3-rc2, both commands would fail with EIO like you'd expect. The only change between rc2 and rc3 is commit 0eb6ddfb865c ("block: Fix __blkdev_direct_IO() for bio fragments"). AFAICT we end up in __blkdev_direct_IO with a 1120K buffer, which gets split into two bios: one for the first BIO_MAX_PAGES worth of data (1MB) and a second one for the 96k after that." Fix this by noting that it's always safe to dereference dio if we get BLK_QC_T_EAGAIN returned, as end_io hasn't been run for that case. So we can safely increment the dio size before calling submit_bio(), and then decrement it on failure (not that it really matters, as the bio and dio are going away). For error handling, return to the original method of just using 'ret' for tracking the error, and the size tracking in dio->size. Fixes: 0eb6ddfb865c ("block: Fix __blkdev_direct_IO() for bio fragments") Fixes: 6a43074e2f46 ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO") Reported-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-06ata: rb532_cf: Fix unused variable warning in rb532_pata_driver_probeGustavo A. R. Silva
Fix the following warning (Building: rb532_defconfig mips): drivers/ata/pata_rb532_cf.c: In function ‘rb532_pata_driver_remove’: drivers/ata/pata_rb532_cf.c:161:24: warning: unused variable ‘info’ [-Wunused-variable] struct rb532_cf_info *info = ah->private_data; ^~~~ Fixes: cd56f35e52d9 ("ata: rb532_cf: Convert to use GPIO descriptors") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-01s390/dasd: fix endless loop after read unit address configurationfor-linus-20190802Stefan Haberland
After getting a storage server event that causes the DASD device driver to update its unit address configuration during a device shutdown there is the possibility of an endless loop in the device driver. In the system log there will be ongoing DASD error messages with RC: -19. The reason is that the loop starting the ruac request only terminates when the retry counter is decreased to 0. But in the sleep_on function there are early exit paths that do not decrease the retry counter. Prevent an endless loop by handling those cases separately. Remove the unnecessary do..while loop since the sleep_on function takes care of retries by itself. Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Cc: stable@vger.kernel.org # 2.6.25+ Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-01block: Fix __blkdev_direct_IO() for bio fragmentsDamien Le Moal
The recent fix to properly handle IOCB_NOWAIT for async O_DIRECT IO (patch 6a43074e2f46) introduced two problems with BIO fragment handling for direct IOs: 1) The dio size processed is calculated by incrementing the ret variable by the size of the bio fragment issued for the dio. However, this size is obtained directly from bio->bi_iter.bi_size AFTER the bio submission which may result in referencing the bi_size value after the bio completed, resulting in an incorrect value use. 2) The ret variable is not incremented by the size of the last bio fragment issued for the bio, leading to an invalid IO size being returned to the user. Fix both problem by using dio->size (which is incremented before the bio submission) to update the value of ret after bio submissions, including for the last bio fragment issued. Fixes: 6a43074e2f46 ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO") Reported-by: Masato Suzuki <masato.suzuki@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-31nvme-pci: Fix async probe remove raceKeith Busch
Ensure the controller is not in the NEW state when nvme_probe() exits. This will always allow a subsequent nvme_remove() to set the state to DELETING, fixing a potential race between the initial asynchronous probe and device removal. Reported-by: Li Zhong <lizhongfs@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31nvme: fix controller removal race with scan workSagi Grimberg
With multipath enabled, nvme_scan_work() can read from the device (through nvme_mpath_add_disk()) and hang [1]. However, with fabrics, once ctrl->state is set to NVME_CTRL_DELETING, the reads will hang (see nvmf_check_ready()) and the mpath stack device make_request will block if head->list is not empty. However, when the head->list consistst of only DELETING/DEAD controllers, we should actually not block, but rather fail immediately. In addition, before we go ahead and remove the namespaces, make sure to clear the current path and kick the requeue list so that the request will fast fail upon requeuing. [1]: -- INFO: task kworker/u4:3:166 blocked for more than 120 seconds. Not tainted 5.2.0-rc6-vmlocalyes-00005-g808c8c2dc0cf #316 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/u4:3 D 0 166 2 0x80004000 Workqueue: nvme-wq nvme_scan_work Call Trace: __schedule+0x851/0x1400 schedule+0x99/0x210 io_schedule+0x21/0x70 do_read_cache_page+0xa57/0x1330 read_cache_page+0x4a/0x70 read_dev_sector+0xbf/0x380 amiga_partition+0xc4/0x1230 check_partition+0x30f/0x630 rescan_partitions+0x19a/0x980 __blkdev_get+0x85a/0x12f0 blkdev_get+0x2a5/0x790 __device_add_disk+0xe25/0x1250 device_add_disk+0x13/0x20 nvme_mpath_set_live+0x172/0x2b0 nvme_update_ns_ana_state+0x130/0x180 nvme_set_ns_ana_state+0x9a/0xb0 nvme_parse_ana_log+0x1c3/0x4a0 nvme_mpath_add_disk+0x157/0x290 nvme_validate_ns+0x1017/0x1bd0 nvme_scan_work+0x44d/0x6a0 process_one_work+0x7d7/0x1240 worker_thread+0x8e/0xff0 kthread+0x2c3/0x3b0 ret_from_fork+0x35/0x40 INFO: task kworker/u4:1:1034 blocked for more than 120 seconds. Not tainted 5.2.0-rc6-vmlocalyes-00005-g808c8c2dc0cf #316 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/u4:1 D 0 1034 2 0x80004000 Workqueue: nvme-delete-wq nvme_delete_ctrl_work Call Trace: __schedule+0x851/0x1400 schedule+0x99/0x210 schedule_timeout+0x390/0x830 wait_for_completion+0x1a7/0x310 __flush_work+0x241/0x5d0 flush_work+0x10/0x20 nvme_remove_namespaces+0x85/0x3d0 nvme_do_delete_ctrl+0xb4/0x1e0 nvme_delete_ctrl_work+0x15/0x20 process_one_work+0x7d7/0x1240 worker_thread+0x8e/0xff0 kthread+0x2c3/0x3b0 ret_from_fork+0x35/0x40 -- Reported-by: Logan Gunthorpe <logang@deltatee.com> Tested-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31nvme-rdma: fix possible use-after-free in connect error flowSagi Grimberg
When start_queue fails, we need to make sure to drain the queue cq before freeing the rdma resources because we might still race with the completion path. Have start_queue() error path safely stop the queue. -- [30371.808111] nvme nvme1: Failed reconnect attempt 11 [30371.808113] nvme nvme1: Reconnecting in 10 seconds... [...] [30382.069315] nvme nvme1: creating 4 I/O queues. [30382.257058] nvme nvme1: Connect Invalid SQE Parameter, qid 4 [30382.257061] nvme nvme1: failed to connect queue: 4 ret=386 [30382.305001] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [30382.305022] IP: qedr_poll_cq+0x8a3/0x1170 [qedr] [30382.305028] PGD 0 P4D 0 [30382.305037] Oops: 0000 [#1] SMP PTI [...] [30382.305153] Call Trace: [30382.305166] ? __switch_to_asm+0x34/0x70 [30382.305187] __ib_process_cq+0x56/0xd0 [ib_core] [30382.305201] ib_poll_handler+0x26/0x70 [ib_core] [30382.305213] irq_poll_softirq+0x88/0x110 [30382.305223] ? sort_range+0x20/0x20 [30382.305232] __do_softirq+0xde/0x2c6 [30382.305241] ? sort_range+0x20/0x20 [30382.305249] run_ksoftirqd+0x1c/0x60 [30382.305258] smpboot_thread_fn+0xef/0x160 [30382.305265] kthread+0x113/0x130 [30382.305273] ? kthread_create_worker_on_cpu+0x50/0x50 [30382.305281] ret_from_fork+0x35/0x40 -- Reported-by: Nicolas Morey-Chaisemartin <NMoreyChaisemartin@suse.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31nvme: fix a possible deadlock when passthru commands sent to a multipath deviceSagi Grimberg
When the user issues a command with side effects, we will end up freezing the namespace request queue when updating disk info (and the same for the corresponding mpath disk node). However, we are not freezing the mpath node request queue, which means that mpath I/O can still come in and block on blk_queue_enter (called from nvme_ns_head_make_request -> direct_make_request). This is a deadlock, because blk_queue_enter will block until the inner namespace request queue is unfroze, but that process is blocked because the namespace revalidation is trying to update the mpath disk info and freeze its request queue (which will never complete because of the I/O that is blocked on blk_queue_enter). Fix this by freezing all the subsystem nsheads request queues before executing the passthru command. Given that these commands are infrequent we should not worry about this temporary I/O freeze to keep things sane. Here is the matching hang traces: -- [ 374.465002] INFO: task systemd-udevd:17994 blocked for more than 122 seconds. [ 374.472975] Not tainted 5.2.0-rc3-mpdebug+ #42 [ 374.478522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 374.487274] systemd-udevd D 0 17994 1 0x00000000 [ 374.493407] Call Trace: [ 374.496145] __schedule+0x2ef/0x620 [ 374.500047] schedule+0x38/0xa0 [ 374.503569] blk_queue_enter+0x139/0x220 [ 374.507959] ? remove_wait_queue+0x60/0x60 [ 374.512540] direct_make_request+0x60/0x130 [ 374.517219] nvme_ns_head_make_request+0x11d/0x420 [nvme_core] [ 374.523740] ? generic_make_request_checks+0x307/0x6f0 [ 374.529484] generic_make_request+0x10d/0x2e0 [ 374.534356] submit_bio+0x75/0x140 [ 374.538163] ? guard_bio_eod+0x32/0xe0 [ 374.542361] submit_bh_wbc+0x171/0x1b0 [ 374.546553] block_read_full_page+0x1ed/0x330 [ 374.551426] ? check_disk_change+0x70/0x70 [ 374.556008] ? scan_shadow_nodes+0x30/0x30 [ 374.560588] blkdev_readpage+0x18/0x20 [ 374.564783] do_read_cache_page+0x301/0x860 [ 374.569463] ? blkdev_writepages+0x10/0x10 [ 374.574037] ? prep_new_page+0x88/0x130 [ 374.578329] ? get_page_from_freelist+0xa2f/0x1280 [ 374.583688] ? __alloc_pages_nodemask+0x179/0x320 [ 374.588947] read_cache_page+0x12/0x20 [ 374.593142] read_dev_sector+0x2d/0xd0 [ 374.597337] read_lba+0x104/0x1f0 [ 374.601046] find_valid_gpt+0xfa/0x720 [ 374.605243] ? string_nocheck+0x58/0x70 [ 374.609534] ? find_valid_gpt+0x720/0x720 [ 374.614016] efi_partition+0x89/0x430 [ 374.618113] ? string+0x48/0x60 [ 374.621632] ? snprintf+0x49/0x70 [ 374.625339] ? find_valid_gpt+0x720/0x720 [ 374.629828] check_partition+0x116/0x210 [ 374.634214] rescan_partitions+0xb6/0x360 [ 374.638699] __blkdev_reread_part+0x64/0x70 [ 374.643377] blkdev_reread_part+0x23/0x40 [ 374.647860] blkdev_ioctl+0x48c/0x990 [ 374.651956] block_ioctl+0x41/0x50 [ 374.655766] do_vfs_ioctl+0xa7/0x600 [ 374.659766] ? locks_lock_inode_wait+0xb1/0x150 [ 374.664832] ksys_ioctl+0x67/0x90 [ 374.668539] __x64_sys_ioctl+0x1a/0x20 [ 374.672732] do_syscall_64+0x5a/0x1c0 [ 374.676828] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 374.738474] INFO: task nvmeadm:49141 blocked for more than 123 seconds. [ 374.745871] Not tainted 5.2.0-rc3-mpdebug+ #42 [ 374.751419] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 374.760170] nvmeadm D 0 49141 36333 0x00004080 [ 374.766301] Call Trace: [ 374.769038] __schedule+0x2ef/0x620 [ 374.772939] schedule+0x38/0xa0 [ 374.776452] blk_mq_freeze_queue_wait+0x59/0x100 [ 374.781614] ? remove_wait_queue+0x60/0x60 [ 374.786192] blk_mq_freeze_queue+0x1a/0x20 [ 374.790773] nvme_update_disk_info.isra.57+0x5f/0x350 [nvme_core] [ 374.797582] ? nvme_identify_ns.isra.50+0x71/0xc0 [nvme_core] [ 374.804006] __nvme_revalidate_disk+0xe5/0x110 [nvme_core] [ 374.810139] nvme_revalidate_disk+0xa6/0x120 [nvme_core] [ 374.816078] ? nvme_submit_user_cmd+0x11e/0x320 [nvme_core] [ 374.822299] nvme_user_cmd+0x264/0x370 [nvme_core] [ 374.827661] nvme_dev_ioctl+0x112/0x1d0 [nvme_core] [ 374.833114] do_vfs_ioctl+0xa7/0x600 [ 374.837117] ? __audit_syscall_entry+0xdd/0x130 [ 374.842184] ksys_ioctl+0x67/0x90 [ 374.845891] __x64_sys_ioctl+0x1a/0x20 [ 374.850082] do_syscall_64+0x5a/0x1c0 [ 374.854178] entry_SYSCALL_64_after_hwframe+0x44/0xa9 -- Reported-by: James Puthukattukaran <james.puthukattukaran@oracle.com> Tested-by: James Puthukattukaran <james.puthukattukaran@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31nvme-core: Fix extra device_put() call on error pathLogan Gunthorpe
In the error path for nvme_init_subsystem(), nvme_put_subsystem() will call device_put(), but it will get called again after the mutex_unlock(). The device_put() only needs to be called if device_add() fails. This bug caused a KASAN use-after-free error when adding and removing subsytems in a loop: BUG: KASAN: use-after-free in device_del+0x8d9/0x9a0 Read of size 8 at addr ffff8883cdaf7120 by task multipathd/329 CPU: 0 PID: 329 Comm: multipathd Not tainted 5.2.0-rc6-vmlocalyes-00019-g70a2b39005fd-dirty #314 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x7b/0xb5 print_address_description+0x6f/0x280 ? device_del+0x8d9/0x9a0 __kasan_report+0x148/0x199 ? device_del+0x8d9/0x9a0 ? class_release+0x100/0x130 ? device_del+0x8d9/0x9a0 kasan_report+0x12/0x20 __asan_report_load8_noabort+0x14/0x20 device_del+0x8d9/0x9a0 ? device_platform_notify+0x70/0x70 nvme_destroy_subsystem+0xf9/0x150 nvme_free_ctrl+0x280/0x3a0 device_release+0x72/0x1d0 kobject_put+0x144/0x410 put_device+0x13/0x20 nvme_free_ns+0xc4/0x100 nvme_release+0xb3/0xe0 __blkdev_put+0x549/0x6e0 ? kasan_check_write+0x14/0x20 ? bd_set_size+0xb0/0xb0 ? kasan_check_write+0x14/0x20 ? mutex_lock+0x8f/0xe0 ? __mutex_lock_slowpath+0x20/0x20 ? locks_remove_file+0x239/0x370 blkdev_put+0x72/0x2c0 blkdev_close+0x8d/0xd0 __fput+0x256/0x770 ? _raw_read_lock_irq+0x40/0x40 ____fput+0xe/0x10 task_work_run+0x10c/0x180 ? filp_close+0xf7/0x140 exit_to_usermode_loop+0x151/0x170 do_syscall_64+0x240/0x2e0 ? prepare_exit_to_usermode+0xd5/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f5a79af05d7 Code: 00 00 0f 05 48 3d 00 f0 ff ff 77 3f c3 66 0f 1f 44 00 00 53 89 fb 48 83 ec 10 e8 c4 fb ff ff 89 df 89 c2 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2b 89 d7 89 44 24 0c e8 06 fc ff ff 8b 44 24 RSP: 002b:00007f5a7799c810 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000008 RCX: 00007f5a79af05d7 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000008 RBP: 00007f5a58000f98 R08: 0000000000000002 R09: 00007f5a7935ee80 R10: 0000000000000000 R11: 0000000000000293 R12: 000055e432447240 R13: 0000000000000000 R14: 0000000000000001 R15: 000055e4324a9cf0 Allocated by task 1236: save_stack+0x21/0x80 __kasan_kmalloc.constprop.6+0xab/0xe0 kasan_kmalloc+0x9/0x10 kmem_cache_alloc_trace+0x102/0x210 nvme_init_identify+0x13c3/0x3820 nvme_loop_configure_admin_queue+0x4fa/0x5e0 nvme_loop_create_ctrl+0x469/0xf40 nvmf_dev_write+0x19a3/0x21ab __vfs_write+0x66/0x120 vfs_write+0x154/0x490 ksys_write+0x104/0x240 __x64_sys_write+0x73/0xb0 do_syscall_64+0xa5/0x2e0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 329: save_stack+0x21/0x80 __kasan_slab_free+0x129/0x190 kasan_slab_free+0xe/0x10 kfree+0xa7/0x200 nvme_release_subsystem+0x49/0x60 device_release+0x72/0x1d0 kobject_put+0x144/0x410 put_device+0x13/0x20 klist_class_dev_put+0x31/0x40 klist_put+0x8f/0xf0 klist_del+0xe/0x10 device_del+0x3a7/0x9a0 nvme_destroy_subsystem+0xf9/0x150 nvme_free_ctrl+0x280/0x3a0 device_release+0x72/0x1d0 kobject_put+0x144/0x410 put_device+0x13/0x20 nvme_free_ns+0xc4/0x100 nvme_release+0xb3/0xe0 __blkdev_put+0x549/0x6e0 blkdev_put+0x72/0x2c0 blkdev_close+0x8d/0xd0 __fput+0x256/0x770 ____fput+0xe/0x10 task_work_run+0x10c/0x180 exit_to_usermode_loop+0x151/0x170 do_syscall_64+0x240/0x2e0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 32fd90c40768 ("nvme: change locking for the per-subsystem controller list") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by : Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31nvmet-file: fix nvmet_file_flush() always returning an errorLogan Gunthorpe
Presently, nvmet_file_flush() always returns a call to errno_to_nvme_status() but that helper doesn't take into account the case when errno=0. So nvmet_file_flush() always returns an error code. All other callers of errno_to_nvme_status() check for success before calling it. To fix this, ensure errno_to_nvme_status() returns success if the errno is zero. This should prevent future mistakes like this from happening. Fixes: c6aa3542e010 ("nvmet: add error log support for file backend") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31nvmet-loop: Flush nvme_delete_wq when removing the portLogan Gunthorpe
After calling nvme_loop_delete_ctrl(), the controllers will not yet be deleted because nvme_delete_ctrl() only schedules work to do the delete. This means a race can occur if a port is removed but there are still active controllers trying to access that memory. To fix this, flush the nvme_delete_wq before returning from nvme_loop_remove_port() so that any controllers that might be in the process of being deleted won't access a freed port. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by : Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31nvmet: Fix use-after-free bug when a port is removedLogan Gunthorpe
When a port is removed through configfs, any connected controllers are still active and can still send commands. This causes a use-after-free bug which is detected by KASAN for any admin command that dereferences req->port (like in nvmet_execute_identify_ctrl). To fix this, disconnect all active controllers when a subsystem is removed from a port. This ensures there are no active controllers when the port is eventually removed. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by : Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31MAINTAINERS: floppy: take over maintainershipDenis Efremov
I would like to maintain the floppy driver. After the recent fixes, I think I know the code pretty well. Nowadays I've got 2 physical 3.5" readers to test all the changes. Signed-off-by: Denis Efremov <efremov@linux.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-31nbd: replace kill_bdev() with __invalidate_device() againMunehisa Kamata
Commit abbbdf12497d ("replace kill_bdev() with __invalidate_device()") once did this, but 29eaadc03649 ("nbd: stop using the bdev everywhere") resurrected kill_bdev() and it has been there since then. So buffer_head mappings still get killed on a server disconnection, and we can still hit the BUG_ON on a filesystem on the top of the nbd device. EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null) block nbd0: Receive control failed (result -32) block nbd0: shutting down sockets print_req_error: I/O error, dev nbd0, sector 66264 flags 3000 EXT4-fs warning (device nbd0): htree_dirblock_to_tree:979: inode #2: lblock 0: comm ls: error -5 reading directory block print_req_error: I/O error, dev nbd0, sector 2264 flags 3000 EXT4-fs error (device nbd0): __ext4_get_inode_loc:4690: inode #2: block 283: comm ls: unable to read itable block EXT4-fs error (device nbd0) in ext4_reserve_inode_write:5894: IO failure ------------[ cut here ]------------ kernel BUG at fs/buffer.c:3057! invalid opcode: 0000 [#1] SMP PTI CPU: 7 PID: 40045 Comm: jbd2/nbd0-8 Not tainted 5.1.0-rc3+ #4 Hardware name: Amazon EC2 m5.12xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:submit_bh_wbc+0x18b/0x190 ... Call Trace: jbd2_write_superblock+0xf1/0x230 [jbd2] ? account_entity_enqueue+0xc5/0xf0 jbd2_journal_update_sb_log_tail+0x94/0xe0 [jbd2] jbd2_journal_commit_transaction+0x12f/0x1d20 [jbd2] ? __switch_to_asm+0x40/0x70 ... ? lock_timer_base+0x67/0x80 kjournald2+0x121/0x360 [jbd2] ? remove_wait_queue+0x60/0x60 kthread+0xf8/0x130 ? commit_timeout+0x10/0x10 [jbd2] ? kthread_bind+0x10/0x10 ret_from_fork+0x35/0x40 With __invalidate_device(), I no longer hit the BUG_ON with sync or unmount on the disconnected device. Fixes: 29eaadc03649 ("nbd: stop using the bdev everywhere") Cc: linux-block@vger.kernel.org Cc: Ratna Manoj Bolla <manoj.br@gmail.com> Cc: nbd@other.debian.org Cc: stable@vger.kernel.org Cc: David Woodhouse <dwmw@amazon.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Munehisa Kamata <kamatam@amazon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-31ata: libahci: do not complain in case of deferred probeMiquel Raynal
Retrieving PHYs can defer the probe, do not spawn an error when -EPROBE_DEFER is returned, it is normal behavior. Fixes: b1a9edbda040 ("ata: libahci: allow to use multiple PHYs") Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-31io_uring: fix KASAN use after free in io_sq_wq_submit_workJackie Liu
[root@localhost ~]# ./liburing/test/link QEMU Standard PC report that: [ 29.379892] CPU: 0 PID: 84 Comm: kworker/u2:2 Not tainted 5.3.0-rc2-00051-g4010b622f1d2-dirty #86 [ 29.379902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 29.379913] Workqueue: io_ring-wq io_sq_wq_submit_work [ 29.379929] Call Trace: [ 29.379953] dump_stack+0xa9/0x10e [ 29.379970] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.379986] print_address_description.cold.6+0x9/0x317 [ 29.379999] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380010] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380026] __kasan_report.cold.7+0x1a/0x34 [ 29.380044] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380061] kasan_report+0xe/0x12 [ 29.380076] io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380104] ? io_sq_thread+0xaf0/0xaf0 [ 29.380152] process_one_work+0xb59/0x19e0 [ 29.380184] ? pwq_dec_nr_in_flight+0x2c0/0x2c0 [ 29.380221] worker_thread+0x8c/0xf40 [ 29.380248] ? __kthread_parkme+0xab/0x110 [ 29.380265] ? process_one_work+0x19e0/0x19e0 [ 29.380278] kthread+0x30b/0x3d0 [ 29.380292] ? kthread_create_on_node+0xe0/0xe0 [ 29.380311] ret_from_fork+0x3a/0x50 [ 29.380635] Allocated by task 209: [ 29.381255] save_stack+0x19/0x80 [ 29.381268] __kasan_kmalloc.constprop.6+0xc1/0xd0 [ 29.381279] kmem_cache_alloc+0xc0/0x240 [ 29.381289] io_submit_sqe+0x11bc/0x1c70 [ 29.381300] io_ring_submit+0x174/0x3c0 [ 29.381311] __x64_sys_io_uring_enter+0x601/0x780 [ 29.381322] do_syscall_64+0x9f/0x4d0 [ 29.381336] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 29.381633] Freed by task 84: [ 29.382186] save_stack+0x19/0x80 [ 29.382198] __kasan_slab_free+0x11d/0x160 [ 29.382210] kmem_cache_free+0x8c/0x2f0 [ 29.382220] io_put_req+0x22/0x30 [ 29.382230] io_sq_wq_submit_work+0x28b/0xe90 [ 29.382241] process_one_work+0xb59/0x19e0 [ 29.382251] worker_thread+0x8c/0xf40 [ 29.382262] kthread+0x30b/0x3d0 [ 29.382272] ret_from_fork+0x3a/0x50 [ 29.382569] The buggy address belongs to the object at ffff888067172140 which belongs to the cache io_kiocb of size 224 [ 29.384692] The buggy address is located 120 bytes inside of 224-byte region [ffff888067172140, ffff888067172220) [ 29.386723] The buggy address belongs to the page: [ 29.387575] page:ffffea00019c5c80 refcount:1 mapcount:0 mapping:ffff88806ace5180 index:0x0 [ 29.387587] flags: 0x100000000000200(slab) [ 29.387603] raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806ace5180 [ 29.387617] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 [ 29.387624] page dumped because: kasan: bad access detected [ 29.387920] Memory state around the buggy address: [ 29.388771] ffff888067172080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ 29.390062] ffff888067172100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 29.391325] >ffff888067172180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 29.392578] ^ [ 29.393480] ffff888067172200: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc [ 29.394744] ffff888067172280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 29.396003] ================================================================== [ 29.397260] Disabling lock debugging due to kernel taint io_sq_wq_submit_work free and read req again. Cc: Zhengyuan Liu <liuzhengyuan@kylinos.cn> Cc: linux-block@vger.kernel.org Cc: stable@vger.kernel.org Fixes: f7b76ac9d17e ("io_uring: fix counter inc/dec mismatch in async_list") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-30loop: Fix mount(2) failure due to race with LOOP_SET_FDJan Kara
Commit 33ec3e53e7b1 ("loop: Don't change loop device under exclusive opener") made LOOP_SET_FD ioctl acquire exclusive block device reference while it updates loop device binding. However this can make perfectly valid mount(2) fail with EBUSY due to racing LOOP_SET_FD holding temporarily the exclusive bdev reference in cases like this: for i in {a..z}{a..z}; do dd if=/dev/zero of=$i.image bs=1k count=0 seek=1024 mkfs.ext2 $i.image mkdir mnt$i done echo "Run" for i in {a..z}{a..z}; do mount -o loop -t ext2 $i.image mnt$i & done Fix the problem by not getting full exclusive bdev reference in LOOP_SET_FD but instead just mark the bdev as being claimed while we update the binding information. This just blocks new exclusive openers instead of failing them with EBUSY thus fixing the problem. Fixes: 33ec3e53e7b1 ("loop: Don't change loop device under exclusive opener") Cc: stable@vger.kernel.org Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-30nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_nsAnthony Iliopoulos
When CONFIG_NVME_MULTIPATH is set, only the hidden gendisk associated with the per-controller ns is run through revalidate_disk when a rescan is triggered, while the visible blockdev never gets its size (bdev->bd_inode->i_size) updated to reflect any capacity changes that may have occurred. This prevents online resizing of nvme block devices and in extension of any filesystems atop that will are unable to expand while mounted, as userspace relies on the blockdev size for obtaining the disk capacity (via BLKGETSIZE/64 ioctls). Fix this by explicitly revalidating the actual namespace gendisk in addition to the per-controller gendisk, when multipath is enabled. Signed-off-by: Anthony Iliopoulos <ailiopoulos@suse.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-29libata: zpodd: Fix small read overflow in zpodd_get_mech_type()Kees Cook
Jeffrin reported a KASAN issue: BUG: KASAN: global-out-of-bounds in ata_exec_internal_sg+0x50f/0xc70 Read of size 16 at addr ffffffff91f41f80 by task scsi_eh_1/149 ... The buggy address belongs to the variable: cdb.48319+0x0/0x40 Much like commit 18c9a99bce2a ("libata: zpodd: small read overflow in eject_tray()"), this fixes a cdb[] buffer length, this time in zpodd_get_mech_type(): We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes. Reported-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Fixes: afe759511808c ("libata: identify and init ZPODD devices") Link: https://lore.kernel.org/lkml/201907181423.E808958@keescook/ Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-29ataflop: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: m68k): drivers/block/ataflop.c: In function ‘fd_locked_ioctl’: drivers/block/ataflop.c:1728:3: warning: this statement may fall through [-Wimplicit-fallthrough=] set_capacity(floppy->disk, MAX_DISK_SIZE * 2); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/block/ataflop.c:1729:2: note: here case FDFMTEND: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-28Linux 5.3-rc2v5.3-rc2Linus Torvalds
2019-07-28Merge tag 'meminit-v5.3-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull structleak fix from Kees Cook: "Disable gcc-based stack variable auto-init under KASAN (Arnd Bergmann). This fixes a bunch of build warnings under KASAN and the gcc-plugin-based stack auto-initialization features (which are arguably redundant, so better to let KASAN control this)" * tag 'meminit-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: structleak: disable STRUCTLEAK_BYREF in combination with KASAN_STACK
2019-07-28Merge tag 'kbuild-fixes-v5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - add compile_commands.json to .gitignore - fix false-positive warning from gen_compile_commands.py after allnoconfig build - remove unused code * tag 'kbuild-fixes-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove unused single-used-m gen_compile_commands: lower the entry count threshold .gitignore: Add compilation database file kbuild: remove unused objectify macro
2019-07-28Merge tag 'char-misc-5.3-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.3-rc2 to resolve some reported issues. Nothing major at all, some binder bugfixes for issues found, some new mei device ids, firmware building warning fixes, habanalabs fixes, a few other build fixes, and a MAINTAINERS update. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: test_firmware: fix a memory leak bug hpet: Fix division by zero in hpet_time_div() eeprom: make older eeprom drivers select NVMEM_SYSFS vmw_balloon: Remove Julien from the maintainers list fpga-manager: altera-ps-spi: Fix build error mei: me: add mule creek canyon (EHL) device ids binder: prevent transactions to context manager from its own process. binder: Set end of SG buffer area properly. firmware: Fix missing inline firmware: fix build errors in paged buffer handling code habanalabs: don't reset device when getting VRHOT habanalabs: use %pad for printing a dma_addr_t
2019-07-28Merge tag 'tty-5.3-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty fixes from Greg KH: "Here are two tty/vt fixes: - delete the netx-serial driver as the arch has been removed, no need to keep the serial driver for it around either. - vt console_lock fix to resolve a reported noisy warning at runtime Both of these have been in linux-next with no reported issues" * tag 'tty-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vt: Grab console_lock around con_is_bound in show_bind tty: serial: netx: Delete driver
2019-07-28Merge tag 'spdx-5.3-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX fixes from Greg KH: "Here are some small SPDX fixes for 5.3-rc2 for things that came in during the 5.3-rc1 merge window that we previously missed. Only three small patches here: - two uapi patches to resolve some SPDX tags that were not correct - fix an invalid SPDX tag in the iomap Makefile file All have been properly reviewed on the public mailing lists" * tag 'spdx-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: iomap: fix Invalid License ID treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headers again treewide: add "WITH Linux-syscall-note" to SPDX tag of uapi headers
2019-07-28Merge tag 'usb-5.3-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small fixes for 5.3-rc2. All of these resolve some reported issues, some more than others :) Included in here is: - xhci fix for an annoying issue with odd devices - reversion of some usb251xb patches that should not have been merged - usb pci quirk additions and fixups - usb storage fix - usb host controller error test fix All of these have been in linux-next with no reported issues" * tag 'usb-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: Fix crash if scatter gather is used with Immediate Data Transfer (IDT). usb: usb251xb: Reallow swap-dx-lanes to apply to the upstream port Revert "usb: usb251xb: Add US port lanes inversion property" Revert "usb: usb251xb: Add US lanes inversion dts-bindings" usb: wusbcore: fix unbalanced get/put cluster_id usb/hcd: Fix a NULL vs IS_ERR() bug in usb_hcd_setup_local_mem() usb-storage: Add a limitation for blk_queue_max_hw_sectors() usb: pci-quirks: Minor cleanup for AMD PLL quirk usb: pci-quirks: Correct AMD PLL quirk detection
2019-07-28Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "Here's the first batch of fixes for this release cycle. Main diffstat here is the re-deletion of netx. I messed up and most likely didn't remove the files from the index when I test-merged this and saw conflicts, and from there on out 'git rerere' remembered the mistake and I missed checking it. Here it's done again as expected. Besides that: - A defconfig refresh + enabling of new drivers for u8500 - i.MX fixlets for i2c/SAI/pinmux - sleep.S build fix for Davinci - Broadcom devicetree build/warning fix" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: defconfig: u8500: Add new drivers ARM: defconfig: u8500: Refresh defconfig ARM: dts: bcm: bcm47094: add missing #cells for mdio-bus-mux ARM: davinci: fix sleep.S build error on ARMv4 arm64: dts: imx8mq: fix SAI compatible arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1 ARM: dts: imx6ul: fix clock frequency property name of I2C buses ARM: Delete netx a second time ARM: dts: imx7ulp: Fix usb-phy unit address format
2019-07-27Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes and functional updates: - Prevent stale huge I/O TLB mappings on 32bit. A long standing bug which got exposed by KPTI support for 32bit - Prevent bogus access_ok() warnings in arch_stack_walk_user() - Add display quirks for Lenovo devices which have height and width swapped - Add the missing CR2 fixup for 32 bit async pagefaults. Fallout of the CR2 bug fix series. - Unbreak handling of force enabled HPET by moving the 'is HPET counting' check back to the original place. - A more accurate check for running on a hypervisor platform in the MDS mitigation code. Not perfect, but more accurate than the previous one. - Update a stale and confusing comment vs. IRQ stacks" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation/mds: Apply more accurate check on hypervisor platform x86/hpet: Undo the early counter is counting check x86/entry/32: Pass cr2 to do_async_page_fault() x86/irq/64: Update stale comment x86/sysfb_efi: Add quirks for some devices with swapped width and height x86/stacktrace: Prevent access_ok() warnings in arch_stack_walk_user() mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy() x86/mm: Sync also unmappings in vmalloc_sync_all() x86/mm: Check for pfn instead of page in vmalloc_sync_one()
2019-07-27Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "Two fixes for the fair scheduling class: - Prevent freeing memory which is accessible by concurrent readers - Make the RCU annotations for numa groups consistent" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Use RCU accessors consistently for ->numa_group sched/fair: Don't free p->numa_faults with concurrent readers
2019-07-27Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A pile of perf related fixes: Kernel: - Fix SLOTS PEBS event constraints for Icelake CPUs - Add the missing mask bit to allow counting hardware generated prefetches on L3 for Icelake CPUs - Make the test for hypervisor platforms more accurate (as far as possible) - Handle PMUs correctly which override event->cpu - Yet another missing fallthrough annotation Tools: perf.data: - Fix loading of compressed data split across adjacent records - Fix buffer size setting for processing CPU topology perf.data header. perf stat: - Fix segfault for event group in repeat mode - Always separate "stalled cycles per insn" line, it was being appended to the "instructions" line. perf script: - Fix --max-blocks man page description. - Improve man page description of metrics. - Fix off by one in brstackinsn IPC computation. perf probe: - Avoid calling freeing routine multiple times for same pointer. perf build: - Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings treated as errors, breaking the build" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Mark expected switch fall-throughs perf/core: Fix creating kernel counters for PMUs that override event->cpu perf/x86: Apply more accurate check on hypervisor platform perf/x86/intel: Fix invalid Bit 13 for Icelake MSR_OFFCORE_RSP_x register perf/x86/intel: Fix SLOTS PEBS event constraint perf build: Do not use -Wshadow on gcc < 4.8 perf probe: Avoid calling freeing routine multiple times for same pointer perf probe: Set pev->nargs to zero after freeing pev->args entries perf session: Fix loading of compressed data split across adjacent records perf stat: Always separate stalled cycles per insn perf stat: Fix segfault for event group in repeat mode perf tools: Fix proper buffer size for feature processing perf script: Fix off by one in brstackinsn IPC computation perf script: Improve man page description of metrics perf script: Fix --max-blocks man page description
2019-07-27Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "A set of locking fixes: - Address the fallout of the rwsem rework. Missing ACQUIREs and a sanity check to prevent a use-after-free - Add missing checks for unitialized mutexes when mutex debugging is enabled. - Remove the bogus code in the generic SMP variant of arch_futex_atomic_op_inuser() - Fixup the #ifdeffery in lockdep to prevent compile warnings" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/mutex: Test for initialized mutex locking/lockdep: Clean up #ifdef checks locking/lockdep: Hide unused 'class' variable locking/rwsem: Add ACQUIRE comments tty/ldsem, locking/rwsem: Add missing ACQUIRE to read_failed sleep loop lcoking/rwsem: Add missing ACQUIRE to read_slowpath sleep loop locking/rwsem: Add missing ACQUIRE to read_slowpath exit when queue is empty locking/rwsem: Don't call owner_on_cpu() on read-owner futex: Cleanup generic SMP variant of arch_futex_atomic_op_inuser()
2019-07-27Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Thomas Gleixner: "A single robustness fix for objtool to handle unbalanced CLAC invocations under all circumstances" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Improve UACCESS coverage
2019-07-27Merge tag 'Wimplicit-fallthrough-5.3-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull Wimplicit-fallthrough enablement from Gustavo A. R. Silva: "This marks switch cases where we are expecting to fall through, and globally enables the -Wimplicit-fallthrough option in the main Makefile. Finally, some missing-break fixes that have been tagged for -stable: - drm/amdkfd: Fix missing break in switch statement - drm/amdgpu/gfx10: Fix missing break in switch statement With these changes, we completely get rid of all the fall-through warnings in the kernel" * tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: Makefile: Globally enable fall-through warning drm/i915: Mark expected switch fall-throughs drm/amd/display: Mark expected switch fall-throughs drm/amdkfd/kfd_mqd_manager_v10: Avoid fall-through warning drm/amdgpu/gfx10: Fix missing break in switch statement drm/amdkfd: Fix missing break in switch statement perf/x86/intel: Mark expected switch fall-throughs mtd: onenand_base: Mark expected switch fall-through afs: fsclient: Mark expected switch fall-throughs afs: yfsclient: Mark expected switch fall-throughs can: mark expected switch fall-throughs firewire: mark expected switch fall-throughs
2019-07-27Merge tag 's390-5.3-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Add ABI to kernel image file which allows e.g. the file utility to figure out the kernel version. - Wire up clone3 system call. - Add support for kasan bitops instrumentation. - uapi header cleanup: use __u{16,32,64} instead of uint{16,32,64}_t. - Provide proper ARCH_ZONE_DMA_BITS so the s390 DMA zone is correctly defined with 2 GB instead of the default value of 1 MB. - Farhan Ali leaves the group of vfio-ccw maintainers. - Various small vfio-ccw fixes. - Add missing locking for airq_areas array in virtio code. - Minor qdio improvements. * tag 's390-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: MAINTAINERS: vfio-ccw: Remove myself as the maintainer s390/mm: use shared variables for sysctl range check virtio/s390: fix race on airq_areas[] s390/dma: provide proper ARCH_ZONE_DMA_BITS value s390/kasan: add bitops instrumentation s390/bitops: make test functions return bool s390: wire up clone3 system call kbuild: enable arch/s390/include/uapi/asm/zcrypt.h for uapi header test s390: use __u{16,32,64} instead of uint{16,32,64}_t in uapi header s390/hypfs: fix a typo in the name of a function s390/qdio: restrict QAOB usage to IQD unicast queues s390/qdio: add sanity checks to the fast-requeue path s390: enable detection of kernel version from bzImage Documentation: fix vfio-ccw doc vfio-ccw: Update documentation for csch/hsch vfio-ccw: Don't call cp_free if we are processing a channel program vfio-ccw: Set pa_nr to 0 if memory allocation fails for pa_iova_pfn vfio-ccw: Fix memory leak and don't call cp_free in cp_init vfio-ccw: Fix misleading comment when setting orb.cmd.c64
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-19 08:35:54 +0000