| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Convert PCI core error codes to proper error numbers since latter get
propagated all the way up to the module loading functions
* tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/igen6: Convert PCIBIOS_* return codes to errnos
EDAC/amd64: Convert PCIBIOS_* return codes to errnos
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One fix for the SiFive PRCI clocks so that the device boots again.
This driver was registering clkdev lookups that were always going to
be useless. This wasn't a problem until clkdev started returning an
error in these cases, causing this driver to fail probe, and thus boot
to fail because clks are essential for most drivers. The fix is
simple, don't use clkdev because this is a DT based system where
clkdev isn't used"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sifive: Do not register clkdevs for PRCI clocks
|
|
Pull smb client fixes from Steve French:
"Two small smb3 client fixes:
- fix deadlock in umount
- minor cleanup due to netfs change"
* tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Don't advance the I/O iterator before terminating subrequest
smb: client: fix deadlock in smb2_find_smb_tcon()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix potential read out of bounds in hid-asus (Andrew Ballance)
- fix endian-conversion on little endian systems in intel-ish-hid (Arnd
Bergmann)
- A couple of new input event codes (Aseda Aboagye)
- errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
(Christophe JAILLET), hid-logitech-dj (José Expósito)
- current leakage fix while the device is in suspend on a i2c-hid
laptop (Johan Hovold)
- other assorted smaller fixes and device ID / quirk entry additions
* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: Ignore battery for ELAN touchscreens 2F2C and 4116
HID: i2c-hid: elan: fix reset suspend current leakage
dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
input: Add support for "Do Not Disturb"
input: Add event code for accessibility key
hid: asus: asus_report_fixup: fix potential read out of bounds
HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
HID: intel-ish-hid: fix endian-conversion
HID: nintendo: Fix an error handling path in nintendo_hid_probe()
HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
HID: core: remove unnecessary WARN_ON() in implement()
HID: nvidia-shield: Add missing check for input_ff_create_memless
HID: intel-ish-hid: Fix build error for COMPILE_TEST
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix the initial state of the save button in 'make gconfig'
- Improve the Kconfig documentation
- Fix a Kconfig bug regarding property visibility
- Fix build breakage for systems where 'sed' is not installed in /bin
- Fix a false warning about missing MODULE_DESCRIPTION()
* tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o
kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh
kconfig: remove wrong expr_trans_bool()
kconfig: doc: document behavior of 'select' and 'imply' followed by 'if'
kconfig: doc: fix a typo in the note about 'imply'
kconfig: gconf: give a proper initial state to the Save button
kconfig: remove unneeded code for user-supplied values being out of range
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fixes for the new ipu6 driver (and related fixes to mei csi driver)
- fix a double debugfs remove logic at mgb4 driver
- a documentation fix
* tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: intel/ipu6: add csi2 port sanity check in notifier bound
media: intel/ipu6: update the maximum supported csi2 port number to 6
media: mei: csi: Warn less verbosely of a missing device fwnode
media: mei: csi: Put the IPU device reference
media: intel/ipu6: fix the buffer flags caused by wrong parentheses
media: intel/ipu6: Fix an error handling path in isys_probe()
media: intel/ipu6: Move isys_remove() close to isys_probe()
media: intel/ipu6: Fix some redundant resources freeing in ipu6_pci_remove()
media: Documentation: v4l: Fix ACTIVE route flag
media: mgb4: Fix double debugfs remove
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix possible memory leak the riscv-intc irqchip driver load failures
- Fix boot crash in the sifive-plic irqchip driver caused by recently
changed boot initialization order
- Fix race condition in the gic-v3-its irqchip driver
* tag 'irq-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()
irqchip/sifive-plic: Chain to parent IRQ after handlers are ready
irqchip/riscv-intc: Prevent memory leak when riscv_intc_init_common() fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Miscellaneous fixes:
- Fix kexec() crash if call depth tracking is enabled
- Fix SMN reads on inaccessible registers on certain AMD systems"
* tag 'x86-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd_nb: Check for invalid SMN reads
x86/kexec: Fix bug with call depth tracking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Ingo Molnar:
"Fix race between perf_event_free_task() and perf_event_release_kernel()
that can result in missed wakeups and hung tasks"
* tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix missing wakeup when waiting for context reference
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking doc fix from Ingo Molnar:
"Fix typos in the kerneldoc of some of the atomic APIs"
* tag 'locking-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: scripts: fix ${atomic}_sub_and_test() kerneldoc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"14 hotfixes, 6 of which are cc:stable.
All except the nilfs2 fix affect MM and all are singletons - see the
chagelogs for details"
* tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
mm: fix xyz_noprof functions calling profiled functions
codetag: avoid race at alloc_slab_obj_exts
mm/hugetlb: do not call vma_add_reservation upon ENOMEM
mm/ksm: fix ksm_zero_pages accounting
mm/ksm: fix ksm_pages_scanned accounting
kmsan: do not wipe out origin when doing partial unpoisoning
vmalloc: check CONFIG_EXECMEM in is_vmalloc_or_module_addr()
mm: page_alloc: fix highatomic typing in multi-block buddies
nilfs2: fix potential kernel bug due to lack of writeback flag waiting
memcg: remove the lockdep assert from __mod_objcg_mlstate()
mm: arm64: fix the out-of-bounds issue in contpte_clear_young_dirty_ptes
mm: huge_mm: fix undefined reference to `mthp_stats' for CONFIG_SYSFS=n
mm: drop the 'anon_' prefix for swap-out mTHP counters
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- interrupt handling and Kconfig fixes for gpio-tqmx86
- add a buffer for storing output values in gpio-tqmx86 as reading back
the registers always returns the input values
- add missing MODULE_DESCRIPTION()s to several GPIO drivers
* tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: add missing MODULE_DESCRIPTION() macros
gpio: tqmx86: fix broken IRQ_TYPE_EDGE_BOTH interrupt type
gpio: tqmx86: store IRQ trigger type and unmask status separately
gpio: tqmx86: introduce shadow register for GPIO output value
gpio: tqmx86: fix typo in Kconfig label
|
|
Pull block fixes from Jens Axboe:
- Fix for null_blk block size validation (Andreas)
- NVMe pull request via Keith:
- Use reserved tags for special fabrics operations (Chunguang)
- Persistent Reservation status masking fix (Weiwen)
* tag 'block-6.10-20240607' of git://git.kernel.dk/linux:
null_blk: fix validation of block size
nvme: fix nvme_pr_* status code parsing
nvme-fabrics: use reserved tag for reg read/write command
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a locking order issue with setting max async thread workers
(Hagar)
- Fix for a NULL pointer dereference for failed async flagged requests
using ring provided buffers. This doesn't affect the current kernel,
but it does affect older kernels, and is being queued up for 6.10
just to make the stable process easier (me)
- Fix for NAPI timeout calculations for how long to busy poll, and
subsequently how much to sleep post that if a wait timeout is passed
in (me)
- Fix for a regression in this release cycle, where we could end up
using a partially unitialized match value for io-wq (Su)
* tag 'io_uring-6.10-20240607' of git://git.kernel.dk/linux:
io_uring: fix possible deadlock in io_register_iowq_max_workers()
io_uring/io-wq: avoid garbage value of 'match' in io_wq_enqueue()
io_uring/napi: fix timeout calculation
io_uring: check for non-NULL file pointer in io_file_can_poll()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix handling of folio private changes.
The private value holds pointer to our extent buffer structure
representing a metadata range. Release and create of the range was
not properly synchronized when updating the private bit which ended
up in double folio_put, leading to all sorts of breakage
- fix a crash, reported as duplicate key in metadata, but caused by a
race of fsync and size extending write. Requires prealloc target
range + fsync and other conditions (log tree state, timing)
- fix leak of qgroup extent records after transaction abort
* tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: protect folio::private when attaching extent buffer folios
btrfs: fix leak of qgroup extent records after transaction abort
btrfs: fix crash on racing fsync and size-extending write into prealloc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix an occasional memory overwrite caused by a fix added in 6.10
* tag 'nfsd-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix loop termination condition in gss_free_in_token_pages()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- Another fix to avoid allocating pages that overlap with ERR_PTR,
which manifests on rv32
- A revert for the badaccess patch I incorrectly picked up an early
version of
* tag 'riscv-for-linus-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Revert "riscv: mm: accelerate pagefault when badaccess"
riscv: fix overlap of allocated page and PTR_ERR
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Do not create PT_LOAD program header for the kenel image when the
virtual memory informaton in OS_INFO data is not available. That
fixes stand-alone dump failures against kernels that do not provide
the virtual memory informaton
- Add KVM s390 shared zeropage selftest
* tag 's390-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
KVM: s390x: selftests: Add shared zeropage test
s390/crash: Do not use VM info if os_info does not have it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Fix spurious CPU hotplug warning message from SETEND emulation code
- Fix the build when GCC wasn't inlining our I/O accessor internals
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/io: add constant-argument check
arm64: armv8_deprecated: Fix warning in isndep cpuhp starting process
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Default silead touchscreen driver to 10 fingers and drop 10 finger
setting from all DMI quirks. More of a cleanup then a pure fix, but
since the DMI quirks always get updated through the fixes branch
this avoids conflicts.
- Kconfig fix for randconfig builds
- dell-smbios: Fix wrong token data in sysfs
- amd-hsmp: Fix driver poking unsupported hw when loaded manually
* tag 'platform-drivers-x86-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/hsmp: Check HSMP support on AMD family of processors
platform/x86: dell-smbios: Simplify error handling
platform/x86: dell-smbios: Fix wrong token data in sysfs
platform/x86: yt2-1380: add CONFIG_EXTCON dependency
platform/x86: touchscreen_dmi: Use 2-argument strscpy()
platform/x86: touchscreen_dmi: Drop "silead,max-fingers" property
Input: silead - Always support 10 fingers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"Core:
- Make iommu-dma code recognize 'force_aperture' again
- Fix for potential NULL-ptr dereference from iommu_sva_bind_device()
return value
AMD IOMMU fixes:
- Fix lockdep splat for invalid wait context
- Add feature bit check before enabling PPR
- Make workqueue name fit into buffer
- Fix memory leak in sysfs code"
* tag 'iommu-fixes-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix Invalid wait context issue
iommu/amd: Check EFR[EPHSup] bit before enabling PPR
iommu/amd: Fix workqueue name
iommu: Return right value in iommu_sva_bind_device()
iommu/dma: Fix domain init
iommu/amd: Fix sysfs leak in iommu init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Fix a regression for the PATA MacIO driver were it would fail to
probe because of the recent changes of initializing the limits in
SCSI core
* tag 'ata-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes: vmwgfx leads the way this week, with minor changes in xe
and amdgpu and a couple of other small fixes.
Seems quiet enough.
xe:
- Update the LMTT when freeing VF GT config
amdgpu:
- Fix shutdown issues on some SMU 13.x platforms
- Silence some UBSAN flexible array warnings
panel:
- sitronix-st7789v: handle of_drm_get_panel_orientation failing
error
vmwgfx:
- filter modes greater than available graphics memory
- fix 3D vs STDU enable
- remove STDU logic from mode valid
- logging fix
- memcmp pointers fix
- remove unused struct
- screen target lifetime fix
komeda:
- unused struct removal"
* tag 'drm-fixes-2024-06-07' of https://gitlab.freedesktop.org/drm/kernel:
drm/vmwgfx: Don't memcmp equivalent pointers
drm/vmwgfx: remove unused struct 'vmw_stdu_dma'
drm/vmwgfx: Don't destroy Screen Target when CRTC is enabled but inactive
drm/vmwgfx: Standardize use of kibibytes when logging
drm/vmwgfx: Remove STDU logic from generic mode_valid function
drm/vmwgfx: 3D disabled should not effect STDU memory limits
drm/vmwgfx: Filter modes which exceed graphics memory
drm/amdgpu/pptable: Fix UBSAN array-index-out-of-bounds
drm/amd: Fix shutdown (again) on some SMU v13.0.4/11 platforms
drm/xe/pf: Update the LMTT when freeing VF GT config
drm/panel: sitronix-st7789v: Add check for of_drm_get_panel_orientation
drm/komeda: remove unused struct 'gamma_curve_segment'
|
|
At least ASUS Zenbook 14 (2023) and ASUS Zenbook 14 Pro (2023) are affected.
The touchscreen reports a battery status of 0% and jumps to 1% when a
stylus is used.
The device ID was added and the battery ignore quirk was enabled for it.
[jkosina@suse.com: reformatted changelog a bit]
Signed-off-by: Louis Dalibard <ontake@ontake.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Elan eKTH5015M touch controller found on the Lenovo ThinkPad X13s
shares the VCC33 supply with other peripherals that may remain powered
during suspend (e.g. when enabled as wakeup sources).
The reset line is also wired so that it can be left deasserted when the
supply is off.
This is important as it avoids holding the controller in reset for
extended periods of time when it remains powered, which can lead to
increased power consumption, and also avoids leaking current through the
X13s reset circuitry during suspend (and after driver unbind).
Use the new 'no-reset-on-power-off' devicetree property to determine
when reset needs to be asserted on power down.
Notably this also avoids wasting power on machine variants without a
touchscreen for which the driver would otherwise exit probe with reset
asserted.
Fixes: bd3cba00dcc6 ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens")
Cc: <stable@vger.kernel.org> # 6.0
Cc: Douglas Anderson <dianders@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240507144821.12275-5-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
When the power supply is shared with other peripherals the reset line
can be wired in such a way that it can remain deasserted regardless of
whether the supply is on or not.
This is important as it can be used to avoid holding the controller in
reset for extended periods of time when it remains powered, something
which can lead to increased power consumption. Leaving reset deasserted
also avoids leaking current through the reset circuitry pull-up
resistors.
Add a new 'no-reset-on-power-off' devicetree property which can be used
by the OS to determine when reset needs to be asserted on power down.
Note that this property can also be used when the supply cannot be
turned off by the OS at all.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240507144821.12275-4-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Add a compatible string for the Elan eKTH5015M touch controller.
Judging from the current binding and commit bd3cba00dcc6 ("HID: i2c-hid:
elan: Add support for Elan eKTH6915 i2c-hid touchscreens"), eKTH5015M
appears to be compatible with eKTH6915. Notably the power-on sequence is
the same.
While at it, drop a redundant label from the example.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240507144821.12275-3-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The Ilitek ILI2901 touch screen controller was apparently incorrectly
added to the Elan eKTH6915 schema simply because it also has a reset
gpio and is currently managed by the Elan driver in Linux.
The two controllers are not related even if an unfortunate wording in
the commit message adding the Ilitek compatible made it sound like they
were.
Add a dedicated schema for the ILI2901 which does not specify the I2C
address (which is likely 0x41 rather than 0x10 as for other Ilitek touch
controllers) to avoid cluttering the Elan schema with unrelated devices
and to make it easier to find the correct schema when adding further
Ilitek controllers.
Fixes: d74ac6f60a7e ("dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901")
Cc: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240507144821.12275-2-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
HUTRR94 added support for a new usage titled "System Do Not Disturb"
which toggles a system-wide Do Not Disturb setting. This commit simply
adds a new event code for the usage.
Signed-off-by: Aseda Aboagye <aaboagye@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/Zl-gUHE70s7wCAoB@google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
HUTRR116 added support for a new usage titled "System Accessibility
Binding" which toggles a system-wide bound accessibility UI or command.
This commit simply adds a new event code for the usage.
Signed-off-by: Aseda Aboagye <aaboagye@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/Zl-e97O9nvudco5z@google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
syzbot reported a potential read out of bounds in asus_report_fixup.
this patch adds checks so that a read out of bounds will not occur
Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
Reported-by: <syzbot+07762f019fd03d01f04c@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=07762f019fd03d01f04c
Fixes: 59d2f5b7392e ("HID: asus: fix more n-key report descriptors if n-key quirked")
Link: https://lore.kernel.org/r/20240602085023.1720492-1-andrewjballance@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
On x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-gw-pld.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-mc33880.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-pcf857x.o
Add the missing invocations of the MODULE_DESCRIPTION() macro,
including the one missing in gpio-pl061.c, which is not built for x86.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240606-md-drivers-gpio-v1-1-cb42d240ca5c@quicinc.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There's now no need to make sure subreq->io_iter is advanced to match
subreq->transferred before calling one of the netfs subrequest termination
functions as the check has been removed netfslib and the iterator is reset
prior to retrying a subreq.
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Unlock cifs_tcp_ses_lock before calling cifs_put_smb_ses() to avoid such
deadlock.
Cc: stable@vger.kernel.org
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Building with W=1 incorrectly emits the following warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in vmlinux.o
This check should apply only to modules.
Fixes: 1fffe7a34c89 ("script: modpost: emit a warning when the description is missing")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
|
|
In commit b18b047002b7 ("kbuild: change scripts/mksysmap into sed
script"), the mksysmap script was transformed into a sed script,
made directly executable with "#!/bin/sed -f". Apparently, the path to
sed is different on NixOS.
The shebang can't use the env command, otherwise the "sed -f" command
would be treated as a single argument. This can be solved with the -S
flag, but that is a GNU extension. Explicitly use sed instead of relying
on the executable shebang to fix NixOS builds without breaking build
environments using Busybox.
Fixes: b18b047002b7 ("kbuild: change scripts/mksysmap into sed script")
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-next-fixes for v6.10-rc3:
- Single unused struct removal that should have been in -fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0251b6ae-bffa-44b2-b698-955712c25a27@linux.intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.10-rc3:
- Robustness fixes for vmwgfx.
- Error check for of_drm_get_panel_orientation failing in
sitronix-st7789v.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d5645d00-a8cf-47d9-a2a0-4ff55842fc7d@linux.intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.10-2024-06-06:
amdgpu:
- Fix shutdown issues on some SMU 13.x platforms
- Silence some UBSAN flexible array warnings
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606192348.3620805-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The core change is to detect unusually large number of VPD pages
(caused by device manufacturers having an endiannes issue) and reject
them rather than trying to parse a huge non-existent array.
The remaining fixes are in drivers the most user visible of which is
the ALUA state transition recognition (leads to intermittent I/O
errors in some situations otherwise)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: mcq: Fix error output and clean up ufshcd_mcq_abort()
scsi: core: Handle devices which return an unusually large VPD page count
scsi: mpt3sas: Add missing kerneldoc parameter descriptions
scsi: qedf: Set qed_slowpath_params to zero before use
scsi: qedf: Wait for stag work during unload
scsi: qedf: Don't process stag work during unload and recovery
scsi: sr: Fix unintentional arithmetic wraparound
scsi: core: alua: I/O errors for ALUA state transitions
scsi: mpi3mr: Use proper format specifier in mpi3mr_sas_port_add()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Revert lockdep checking on locking that protects device resets from
user-space config accesses; it exposed issues for which fixes are in
the works but are too risky for this cycle (Dan Williams)
* tag 'pci-v6.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Revert the cfg_access_lock lockdep mechanism
|
|
[BUG]
Since v6.8 there are rare kernel crashes reported by various people,
the common factor is bad page status error messages like this:
BUG: Bad page state in process kswapd0 pfn:d6e840
page: refcount:0 mapcount:0 mapping:000000007512f4f2 index:0x2796c2c7c
pfn:0xd6e840
aops:btree_aops ino:1
flags: 0x17ffffe0000008(uptodate|node=0|zone=2|lastcpupid=0x3fffff)
page_type: 0xffffffff()
raw: 0017ffffe0000008 dead000000000100 dead000000000122 ffff88826d0be4c0
raw: 00000002796c2c7c 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: non-NULL mapping
[CAUSE]
Commit 09e6cef19c9f ("btrfs: refactor alloc_extent_buffer() to
allocate-then-attach method") changes the sequence when allocating a new
extent buffer.
Previously we always called grab_extent_buffer() under
mapping->i_private_lock, to ensure the safety on modification on
folio::private (which is a pointer to extent buffer for regular
sectorsize).
This can lead to the following race:
Thread A is trying to allocate an extent buffer at bytenr X, with 4
4K pages, meanwhile thread B is trying to release the page at X + 4K
(the second page of the extent buffer at X).
Thread A | Thread B
-----------------------------------+-------------------------------------
| btree_release_folio()
| | This is for the page at X + 4K,
| | Not page X.
| |
alloc_extent_buffer() | |- release_extent_buffer()
|- filemap_add_folio() for the | | |- atomic_dec_and_test(eb->refs)
| page at bytenr X (the first | | |
| page). | | |
| Which returned -EEXIST. | | |
| | | |
|- filemap_lock_folio() | | |
| Returned the first page locked. | | |
| | | |
|- grab_extent_buffer() | | |
| |- atomic_inc_not_zero() | | |
| | Returned false | | |
| |- folio_detach_private() | | |- folio_detach_private() for X
| |- folio_test_private() | | |- folio_test_private()
| Returned true | | | Returned true
|- folio_put() | |- folio_put()
Now there are two puts on the same folio at folio X, leading to refcount
underflow of the folio X, and eventually causing the BUG_ON() on the
page->mapping.
The condition is not that easy to hit:
- The release must be triggered for the middle page of an eb
If the release is on the same first page of an eb, page lock would kick
in and prevent the race.
- folio_detach_private() has a very small race window
It's only between folio_test_private() and folio_clear_private().
That's exactly when mapping->i_private_lock is used to prevent such race,
and commit 09e6cef19c9f ("btrfs: refactor alloc_extent_buffer() to
allocate-then-attach method") screwed that up.
At that time, I thought the page lock would kick in as
filemap_release_folio() also requires the page to be locked, but forgot
the filemap_release_folio() only locks one page, not all pages of an
extent buffer.
[FIX]
Move all the code requiring i_private_lock into
attach_eb_folio_to_filemap(), so that everything is done with proper
lock protection.
Furthermore to prevent future problems, add an extra
lockdep_assert_locked() to ensure we're holding the proper lock.
To reproducer that is able to hit the race (takes a few minutes with
instrumented code inserting delays to alloc_extent_buffer()):
#!/bin/sh
drop_caches () {
while(true); do
echo 3 > /proc/sys/vm/drop_caches
echo 1 > /proc/sys/vm/compact_memory
done
}
run_tar () {
while(true); do
for x in `seq 1 80` ; do
tar cf /dev/zero /mnt > /dev/null &
done
wait
done
}
mkfs.btrfs -f -d single -m single /dev/vda
mount -o noatime /dev/vda /mnt
# create 200,000 files, 1K each
./simoop -n 200000 -E -f 1k /mnt
drop_caches &
(run_tar)
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-btrfs/CAHk-=wgt362nGfScVOOii8cgKn2LVVHeOvOA7OBwg1OwbuJQcw@mail.gmail.com/
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://lore.kernel.org/lkml/CABXGCsPktcHQOvKTbPaTwegMExije=Gpgci5NW=hqORo-s7diA@mail.gmail.com/
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Link: https://lore.kernel.org/linux-btrfs/e8b3311c-9a75-4903-907f-fc0f7a3fe423@gmx.de/
Reported-by: syzbot+f80b066392366b4af85e@syzkaller.appspotmail.com
Fixes: 09e6cef19c9f ("btrfs: refactor alloc_extent_buffer() to allocate-then-attach method")
CC: stable@vger.kernel.org # 6.8+
CC: Chris Mason <clm@fb.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from BPF and big collection of fixes for WiFi core and
drivers.
Current release - regressions:
- vxlan: fix regression when dropping packets due to invalid src
addresses
- bpf: fix a potential use-after-free in bpf_link_free()
- xdp: revert support for redirect to any xsk socket bound to the
same UMEM as it can result in a corruption
- virtio_net:
- add missing lock protection when reading return code from
control_buf
- fix false-positive lockdep splat in DIM
- Revert "wifi: wilc1000: convert list management to RCU"
- wifi: ath11k: fix error path in ath11k_pcic_ext_irq_config
Previous releases - regressions:
- rtnetlink: make the "split" NLM_DONE handling generic, restore the
old behavior for two cases where we started coalescing those
messages with normal messages, breaking sloppily-coded userspace
- wifi:
- cfg80211: validate HE operation element parsing
- cfg80211: fix 6 GHz scan request building
- mt76: mt7615: add missing chanctx ops
- ath11k: move power type check to ASSOC stage, fix connecting to
6 GHz AP
- ath11k: fix WCN6750 firmware crash caused by 17 num_vdevs
- rtlwifi: ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS
- iwlwifi: mvm: fix a crash on 7265
Previous releases - always broken:
- ncsi: prevent multi-threaded channel probing, a spec violation
- vmxnet3: disable rx data ring on dma allocation failure
- ethtool: init tsinfo stats if requested, prevent unintentionally
reporting all-zero stats on devices which don't implement any
- dst_cache: fix possible races in less common IPv6 features
- tcp: auth: don't consider TCP_CLOSE to be in TCP_AO_ESTABLISHED
- ax25: fix two refcounting bugs
- eth: ionic: fix kernel panic in XDP_TX action
Misc:
- tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB"
* tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
selftests: net: lib: set 'i' as local
selftests: net: lib: avoid error removing empty netns name
selftests: net: lib: support errexit with busywait
net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool()
ipv6: fix possible race in __fib6_drop_pcpu_from()
af_unix: Annotate data-race of sk->sk_shutdown in sk_diag_fill().
af_unix: Use skb_queue_len_lockless() in sk_diag_show_rqlen().
af_unix: Use skb_queue_empty_lockless() in unix_release_sock().
af_unix: Use unix_recvq_full_lockless() in unix_stream_connect().
af_unix: Annotate data-race of net->unx.sysctl_max_dgram_qlen.
af_unix: Annotate data-races around sk->sk_sndbuf.
af_unix: Annotate data-races around sk->sk_state in UNIX_DIAG.
af_unix: Annotate data-race of sk->sk_state in unix_stream_read_skb().
af_unix: Annotate data-races around sk->sk_state in sendmsg() and recvmsg().
af_unix: Annotate data-race of sk->sk_state in unix_accept().
af_unix: Annotate data-race of sk->sk_state in unix_stream_connect().
af_unix: Annotate data-races around sk->sk_state in unix_write_space() and poll().
af_unix: Annotate data-race of sk->sk_state in unix_inq_len().
af_unix: Annodate data-races around sk->sk_state for writers.
af_unix: Set sk->sk_state under unix_state_lock() for truly disconencted peer.
...
|
|
Pull tomoyo fixlet from Tetsuo Handa:
"Single patch to update project links, no behavior changes"
* tag 'tomoyo-pr-20240606' of git://git.code.sf.net/p/tomoyo/tomoyo:
tomoyo: update project links
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Ensure that .discard sections are really discarded in the EFI zboot
image build
- Return proper error numbers from efi-pstore
- Add __nocfi annotations to EFI runtime wrappers
* tag 'efi-fixes-for-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Add missing __nocfi annotations to runtime wrappers
efi: pstore: Return proper errors on UEFI failures
efi/libstub: zboot.lds: Discard .discard sections
|
|
Matthieu Baerts says:
====================
selftests: net: lib: small fixes
While looking at using 'lib.sh' for the MPTCP selftests [1], we found
some small issues with 'lib.sh'. Here they are:
- Patch 1: fix 'errexit' (set -e) support with busywait. 'errexit' is
supported in some functions, not all. A fix for v6.8+.
- Patch 2: avoid confusing error messages linked to the cleaning part
when the netns setup fails. A fix for v6.8+.
- Patch 3: set a variable as local to avoid accidentally changing the
value of a another one with the same name on the caller side. A fix
for v6.10-rc1+.
Link: https://lore.kernel.org/mptcp/5f4615c3-0621-43c5-ad25-55747a4350ce@kernel.org/T/ [1]
====================
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-0-b3afadd368c9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Without this, the 'i' variable declared before could be overridden by
accident, e.g.
for i in "${@}"; do
__ksft_status_merge "${i}" ## 'i' has been modified
foo "${i}" ## using 'i' with an unexpected value
done
After a quick look, it looks like 'i' is currently not used after having
been modified in __ksft_status_merge(), but still, better be safe than
sorry. I saw this while modifying the same file, not because I suspected
an issue somewhere.
Fixes: 596c8819cb78 ("selftests: forwarding: Have RET track kselftest framework constants")
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-3-b3afadd368c9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If there is an error to create the first netns with 'setup_ns()',
'cleanup_ns()' will be called with an empty string as first parameter.
The consequences is that 'cleanup_ns()' will try to delete an invalid
netns, and wait 20 seconds if the netns list is empty.
Instead of just checking if the name is not empty, convert the string
separated by spaces to an array. Manipulating the array is cleaner, and
calling 'cleanup_ns()' with an empty array will be a no-op.
Fixes: 25ae948b4478 ("selftests/net: add lib.sh")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-2-b3afadd368c9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If errexit is enabled ('set -e'), loopy_wait -- or busywait and others
using it -- will stop after the first failure.
Note that if the returned status of loopy_wait is checked, and even if
errexit is enabled, Bash will not stop at the first error.
Fixes: 25ae948b4478 ("selftests/net: add lib.sh")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-1-b3afadd368c9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The pata_macio driver advertises a max_segment_size of 0xff00, because
the hardware doesn't cope with requests >= 64K.
However the SCSI core requires max_segment_size to be at least
PAGE_SIZE, which is a problem for pata_macio when the kernel is built
with 64K pages.
In older kernels the SCSI core would just increase the segment size to
be equal to PAGE_SIZE, however since the commit tagged below it causes a
warning and the device fails to probe:
WARNING: CPU: 0 PID: 26 at block/blk-settings.c:202 .blk_validate_limits+0x2f8/0x35c
CPU: 0 PID: 26 Comm: kworker/u4:1 Not tainted 6.10.0-rc1 #1
Hardware name: PowerMac7,2 PPC970 0x390202 PowerMac
...
NIP .blk_validate_limits+0x2f8/0x35c
LR .blk_alloc_queue+0xc0/0x2f8
Call Trace:
.blk_alloc_queue+0xc0/0x2f8
.blk_mq_alloc_queue+0x60/0xf8
.scsi_alloc_sdev+0x208/0x3c0
.scsi_probe_and_add_lun+0x314/0x52c
.__scsi_add_device+0x170/0x1a4
.ata_scsi_scan_host+0x2bc/0x3e4
.async_port_probe+0x6c/0xa0
.async_run_entry_fn+0x60/0x1bc
.process_one_work+0x228/0x510
.worker_thread+0x360/0x530
.kthread+0x134/0x13c
.start_kernel_thread+0x10/0x14
...
scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
Although the hardware can't cope with a 64K segment, the driver
already deals with that internally by splitting large requests in
pata_macio_qc_prep(). That is how the driver has managed to function
until now on 64K kernels.
So fix the driver to advertise a max_segment_size of 64K, which avoids
the warning and keeps the SCSI core happy.
Fixes: afd53a3d8528 ("scsi: core: Initialize scsi midlayer limits before allocating the queue")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/ce2bf6af-4382-4fe1-b392-cc6829f5ceb2@roeck-us.net/
Reported-by: Doru Iorgulescu <doru.iorgulescu1@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218858
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
