Age | Commit message (Collapse) | Author |
|
The test/clear_bit() functions take a bit number, but this code is
passing as shifted value. It's the equivalent of saying BIT(BIT(0))
instead of just BIT(0).
This doesn't affect runtime because numbers are small and it's done
consistently.
Fixes: fa362045564e ("ublk: simplify ublk_ch_open and ublk_ch_release")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/Yt/2R/+MJf/MSoyl@kili
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Userspace may support more features or new added flags, but the driver
side can be old, so make sure correct flags(features) returned to
userpsace, then userspace can work as expected.
Also mark the 2nd flags as reversed, just use the 1st one. When we run
out of flags, the reserved one can be handled at that time.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220722103817.631258-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__ublk_destroy_dev() is called for handling error in ublk_add_dev(),
but either tagset isn't allocated or mutex isn't initialized.
So fix the issue by letting replacing ublk_add_dev with a
ublk_add_tag_set function that is much more limited in scope and
instead unwind every single step directly in ublk_ctrl_add_dev.
To allow for this refactor the device freeing so that there is
a helper for freeing the device number instead of coupling that
with freeing the mutex and the memory.
Note that this now copies the dev_info to userspace before adding
the character device. This not only simplifies the erro handling
in ublk_ctrl_add_dev, but also means that the character device
can only be seen by userspace if the device addition succeeded.
Based on a patch from Ming Lei.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220722103817.631258-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ub->mutex is used to protecting reading and writing ub->mm, then the
following lockdep warning is triggered.
Fix it by using one dedicated spin lock for protecting ub->mm.
[1] lockdep warning
[ 25.046186] ======================================================
[ 25.048886] WARNING: possible circular locking dependency detected
[ 25.051610] 5.19.0-rc4_for-v5.20+ #149 Not tainted
[ 25.053665] ------------------------------------------------------
[ 25.056334] ublk/989 is trying to acquire lock:
[ 25.058296] ffff975d0329a918 (&disk->open_mutex){+.+.}-{3:3}, at: bd_register_pending_holders+0x2a/0x110
[ 25.063678]
[ 25.063678] but task is already holding lock:
[ 25.066246] ffff975d1df59708 (&ub->mutex){+.+.}-{3:3}, at: ublk_ctrl_uring_cmd+0x2df/0x730
[ 25.069423]
[ 25.069423] which lock already depends on the new lock.
[ 25.069423]
[ 25.072603]
[ 25.072603] the existing dependency chain (in reverse order) is:
[ 25.074908]
[ 25.074908] -> #3 (&ub->mutex){+.+.}-{3:3}:
[ 25.076386] __mutex_lock+0x93/0x870
[ 25.077470] ublk_ch_mmap+0x3a/0x140
[ 25.078494] mmap_region+0x375/0x5a0
[ 25.079386] do_mmap+0x33a/0x530
[ 25.080168] vm_mmap_pgoff+0xb9/0x150
[ 25.080979] ksys_mmap_pgoff+0x184/0x1f0
[ 25.081838] do_syscall_64+0x37/0x80
[ 25.082653] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 25.083730]
[ 25.083730] -> #2 (&mm->mmap_lock#2){++++}-{3:3}:
[ 25.084707] __might_fault+0x55/0x80
[ 25.085344] _copy_from_user+0x1e/0xa0
[ 25.086020] get_sg_io_hdr+0x26/0xb0
[ 25.086651] scsi_ioctl+0x42f/0x960
[ 25.087267] sr_block_ioctl+0xe8/0x100
[ 25.087734] blkdev_ioctl+0x134/0x2b0
[ 25.088196] __x64_sys_ioctl+0x8a/0xc0
[ 25.088677] do_syscall_64+0x37/0x80
[ 25.089044] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 25.089548]
[ 25.089548] -> #1 (&cd->lock){+.+.}-{3:3}:
[ 25.090072] __mutex_lock+0x93/0x870
[ 25.090452] sr_block_open+0x64/0xe0
[ 25.090837] blkdev_get_whole+0x26/0x90
[ 25.091445] blkdev_get_by_dev.part.0+0x1ce/0x2f0
[ 25.092203] blkdev_open+0x52/0x90
[ 25.092617] do_dentry_open+0x1ca/0x360
[ 25.093499] path_openat+0x78d/0xcb0
[ 25.094136] do_filp_open+0xa1/0x130
[ 25.094759] do_sys_openat2+0x76/0x130
[ 25.095454] __x64_sys_openat+0x5c/0x70
[ 25.096078] do_syscall_64+0x37/0x80
[ 25.096637] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 25.097304]
[ 25.097304] -> #0 (&disk->open_mutex){+.+.}-{3:3}:
[ 25.098229] __lock_acquire+0x12e2/0x1f90
[ 25.098789] lock_acquire+0xbf/0x2c0
[ 25.099256] __mutex_lock+0x93/0x870
[ 25.099706] bd_register_pending_holders+0x2a/0x110
[ 25.100246] device_add_disk+0x209/0x370
[ 25.100712] ublk_ctrl_uring_cmd+0x405/0x730
[ 25.101205] io_issue_sqe+0xfe/0x2ac0
[ 25.101665] io_submit_sqes+0x352/0x1820
[ 25.102131] __do_sys_io_uring_enter+0x848/0xdc0
[ 25.102646] do_syscall_64+0x37/0x80
[ 25.103087] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 25.103640]
[ 25.103640] other info that might help us debug this:
[ 25.103640]
[ 25.104549] Chain exists of:
[ 25.104549] &disk->open_mutex --> &mm->mmap_lock#2 --> &ub->mutex
[ 25.104549]
[ 25.105611] Possible unsafe locking scenario:
[ 25.105611]
[ 25.106258] CPU0 CPU1
[ 25.106677] ---- ----
[ 25.107100] lock(&ub->mutex);
[ 25.107446] lock(&mm->mmap_lock#2);
[ 25.108045] lock(&ub->mutex);
[ 25.108802] lock(&disk->open_mutex);
[ 25.109265]
[ 25.109265] *** DEADLOCK ***
[ 25.109265]
[ 25.110117] 2 locks held by ublk/989:
[ 25.110490] #0: ffff975d07bbf8a8 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0x83e/0xdc0
[ 25.111249] #1: ffff975d1df59708 (&ub->mutex){+.+.}-{3:3}, at: ublk_ctrl_uring_cmd+0x2df/0x730
[ 25.111943]
[ 25.111943] stack backtrace:
[ 25.112557] CPU: 2 PID: 989 Comm: ublk Not tainted 5.19.0-rc4_for-v5.20+ #149
[ 25.113137] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-1.fc33 04/01/2014
[ 25.113792] Call Trace:
[ 25.114130] <TASK>
[ 25.114417] dump_stack_lvl+0x71/0xa0
[ 25.114771] check_noncircular+0xdf/0x100
[ 25.115137] ? register_lock_class+0x38/0x470
[ 25.115524] __lock_acquire+0x12e2/0x1f90
[ 25.115887] ? find_held_lock+0x2b/0x80
[ 25.116244] lock_acquire+0xbf/0x2c0
[ 25.116590] ? bd_register_pending_holders+0x2a/0x110
[ 25.117009] __mutex_lock+0x93/0x870
[ 25.117362] ? bd_register_pending_holders+0x2a/0x110
[ 25.117780] ? bd_register_pending_holders+0x2a/0x110
[ 25.118201] ? kobject_add+0x71/0x90
[ 25.118546] ? bd_register_pending_holders+0x2a/0x110
[ 25.118958] bd_register_pending_holders+0x2a/0x110
[ 25.119373] device_add_disk+0x209/0x370
[ 25.119732] ublk_ctrl_uring_cmd+0x405/0x730
[ 25.120109] ? rcu_read_lock_sched_held+0x3c/0x70
[ 25.120514] io_issue_sqe+0xfe/0x2ac0
[ 25.120863] io_submit_sqes+0x352/0x1820
[ 25.121228] ? rcu_read_lock_sched_held+0x3c/0x70
[ 25.121626] ? __do_sys_io_uring_enter+0x83e/0xdc0
[ 25.122028] ? find_held_lock+0x2b/0x80
[ 25.122390] ? __do_sys_io_uring_enter+0x848/0xdc0
[ 25.122791] __do_sys_io_uring_enter+0x848/0xdc0
[ 25.123190] ? syscall_enter_from_user_mode+0x20/0x70
[ 25.123606] ? syscall_enter_from_user_mode+0x20/0x70
[ 25.124024] do_syscall_64+0x37/0x80
[ 25.124383] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 25.124829] RIP: 0033:0x7f120a762af6
[ 25.125223] Code: 45 c1 41 89 c2 41 b9 08 00 00 00 41 83 ca 10 f6 87 d0 00 00 00 01 8b bf cc 00 00 00 44 0f 44 d0 45 31 c0c
[ 25.126576] RSP: 002b:00007ffdcb3c5518 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa
[ 25.127153] RAX: ffffffffffffffda RBX: 00000000013aef50 RCX: 00007f120a762af6
[ 25.127748] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000004
[ 25.128351] RBP: 000000000000000b R08: 0000000000000000 R09: 0000000000000008
[ 25.128956] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcb3c74a6
[ 25.129524] R13: 00000000013aef50 R14: 0000000000000000 R15: 00000000000003df
[ 25.130121] </TASK>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721153117.591394-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__blk_get_queue is only called by blk_get_queue, so merge the two.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220721063432.1714609-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To undo the all initialization from blk_mq_init_allocated_queue in case
of a probe failure where add_disk is never called we have to call
blk_mq_exit_queue from put_disk.
This relies on the fact that drivers always call blk_mq_free_tag_set
after calling put_disk in the probe error path if they have a gendisk
at all.
We should be doing this in general, but can't do it for the normal
teardown case (yet) as the tagset can be gone by the time the disk is
released once it was added. I hope to sort this out properly eventually
but for now this isolated hack will do it.
Fixes: 6f8191fdf41d ("block: simplify disk shutdown")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220720130541.1323531-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To fully clean up the queue if the disk allocation fails we need to
call blk_mq_destroy_queue and not just blk_put_queue.
Fixes: 6f8191fdf41d ("block: simplify disk shutdown")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220720130541.1323531-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Defer allocating the gendisk and request_queue until UBLK_CMD_START_DEV
is called. This avoids funky life times where a disk is allocated
and then can be added and removed multiple times, which has never been
supported by the block layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Looking at the hctxs and cpumap is not safe without at very last a RCU
reference. It also requires the queue to be set up before starting the
device, which leads to rather awkward life time rules.
Instead rewrite ublk_ctrl_get_queue_affinity to just build the cpumask
directly from the mq_map in the tag set, similar to hctx->cpumask is
built.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fold __ublk_create_dev into its only caller to avoid the packing and
unpacking of the return value into an ERR_PTR.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move all per-command work into the per-command ublk_ctrl_* helpers
instead of being split over those, ublk_ctrl_cmd_validate, and the main
ublk_ctrl_uring_cmd handler. To facilitate that, the old
ublk_ctrl_stop_dev function that just contained two function calls is
folded into both callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
fops->open and fops->release are always paired. Use simple atomic bit
ops ot indicate if the device is opened instead of a count that can
only be 0 and 1 and a useless cmpxchg loop in ublk_ch_release.
Also don't bother clearing file->private_data is the file is about to
be freed anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No need to define empty versions, they can just be left out.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
REQ_PREFLUSH is turned into REQ_OP_FLUSH by the flush state machine
and thus never seen by a blk-mq based driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make get_maintainers.pl work for ublk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In our test of iocost, we encountered some list add/del corruptions of
inner_walk list in ioc_timer_fn.
The reason can be described as follows:
cpu 0 cpu 1
ioc_qos_write ioc_qos_write
ioc = q_to_ioc(queue);
if (!ioc) {
ioc = kzalloc();
ioc = q_to_ioc(queue);
if (!ioc) {
ioc = kzalloc();
...
rq_qos_add(q, rqos);
}
...
rq_qos_add(q, rqos);
...
}
When the io.cost.qos file is written by two cpus concurrently, rq_qos may
be added to one disk twice. In that case, there will be two iocs enabled
and running on one disk. They own different iocgs on their active list. In
the ioc_timer_fn function, because of the iocgs from two iocs have the
same root iocg, the root iocg's walk_list may be overwritten by each other
and this leads to list add/del corruptions in building or destroying the
inner_walk list.
And so far, the blk-rq-qos framework works in case that one instance for
one type rq_qos per queue by default. This patch make this explicit and
also fix the crash above.
Signed-off-by: Jinke Han <hanjinke.666@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220720093616.70584-1-hanjinke.666@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In case of adding disk failure, the disk needs to be released, otherwise
disk/queue is leaked.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220718160851.312972-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The blk_mq_alloc_disk_for_queue() doesn't return error pointers, it
returns NULL on error.
Fixes: cebbe577cb17 ("ublk_drv: fix request queue leak")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/YtVAgedTsQVK1oTM@kili
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ublk protocol has no mechanism to actually transfer the integrity
metadata, so don't define this flag, which requires that an integrity
payload is attached to a bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220718063013.335531-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Eliminate the following coccicheck warnings:
./drivers/block/ublk_drv.c:1467:2-3: Unneeded semicolon
./drivers/block/ublk_drv.c:1528:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220718015431.40185-1-yang.lee@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If blk_mq_init_queue() fails, it should return error code in ublk_add_dev()
Fixes: cebbe577cb17 ("ublk_drv: fix request queue leak")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220718042408.3132835-1-yangyingliang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After applying -Wmaybe-uninitialized manually, two build warnings are
triggered:
drivers/block/ublk_drv.c:940:11: warning: ‘io’ may be used uninitialized [-Wmaybe-uninitialized]
940 | io->flags &= ~UBLK_IO_FLAG_ACTIVE;
drivers/block/ublk_drv.c: In function ‘ublk_ctrl_uring_cmd’:
drivers/block/ublk_drv.c:1531:9: warning: ‘ret’ may be used uninitialized [-Wmaybe-uninitialized]
Fix the 1st one by removing 'io->flags &= ~UBLK_IO_FLAG_ACTIVE;' which
isn't needed since the function always return successfully after setting
this flag.
Fix the 2nd one by always initializing 'ret'.
Also fix another sparse warning of 'sparse: sparse: incorrect type in return
expression' by changing return type of ublk_setup_iod().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220716095344.222674-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reflect recent changes in the blk_fill_rwbs() kernel-doc header.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 919dbca8670d ("blktrace: Use the new blk_opf_t type")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220715184735.2326034-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Bring the ll_rw_block() kernel-doc header again in sync with the
function prototype.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 1420c4a549bf ("fs/buffer: Combine two submit_bh() and ll_rw_block() arguments")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220715184735.2326034-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using the enum req_op type for request
operations.
Reviewed-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-64-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for the
combination of a request operation with request flags.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-63-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags. Combine the first two
hib_submit_io() arguments into a single argument.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-62-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags. Combine the last two
o2hb_setup_one_bio() arguments into a single argument.
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-61-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using enum req_op instead of u32 for
block layer request operations.
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-60-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags. Combine the 'mode' and
'mode_flags' arguments of nilfs_btnode_submit_block into a single
argument 'opf'.
Reviewed-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-59-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using enum req_op for request operations.
Rename an 'rw' argument into 'op' since that name is typically used for
request operations. This patch does not change any functionality. Note:
REQ_OP_READ = READ = 0 and REQ_OP_WRITE = WRITE = 1.
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-58-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 2a222ca992c3 ("fs: have submit_bh users pass in op and flags
separately") renamed the jbd2_write_superblock() 'write_op' argument into
'write_flags'. Propagate this change to the jbd2_write_superblock()
callers. Additionally, change the type of 'write_flags' into blk_opf_t.
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-57-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
the combination of a request operation and request flags.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-56-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags. Combine the last two
hfsplus_submit_bio() arguments into a single argument.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-55-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags. Combine the first two
gfs2_submit_bhs() arguments into a single argument.
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-54-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags.
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-53-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using the new blk_opf_t type for
variables that represent request flags.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Baokun Li <libaokun1@huawei.com>
Cc: Ye Bin <yebin10@huawei.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-52-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags.
Acked-by: David Sterba <dsterba@suse.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-51-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using the new blk_opf_t type for the
combination of a block layer request with block layer request flags.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-50-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reduce the size of struct dio by combining the 'op' and 'op_flags' into
the new 'opf' member. Use the new blk_opf_t type to improve static type
checking. This patch does not change any functionality.
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-49-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Both submit_bh() and ll_rw_block() accept a request operation type and
request flags as their first two arguments. Micro-optimize these two
functions by combining these first two arguments into a single argument.
This patch does not change the behavior of any of the modified code.
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Song Liu <song@kernel.org> (for the md changes)
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-48-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using the new blk_opf_t type for block layer
request flags. Change WRITE into REQ_OP_WRITE. This patch does not change
any functionality since REQ_OP_WRITE == WRITE == 1.
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-47-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using the new blk_opf_t type for block
layer request flags.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Stefan Roesch <shr@fb.com>
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-46-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using the new blk_opf_t type for variables
that represent a request operation combined with request flags.
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Bodo Stroesser <bostroesser@gmail.com>
Cc: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-45-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve consistency of the kernel code by renaming a request operation
argument from 'dir' into 'op'.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-44-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using the new blk_opf_t type for variables
that represent request flags.
Cc: Hannes Reinecke <hare@suse.com>
Cc: Martin Wilck <mwilck@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-43-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the new blk_opf_t type for arguments and variables that represent
request flags. Use the !! operator in scsi_noretry_cmd() to convert the
blk_opf_t type into a boolean. This patch does not change any functionality.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-42-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch prepares for introducing the new blk_opf_t type in the SCSI core.
Since the value returned by scsi_noretry_cmd() is only used in boolean
expressions, this patch does not change any functionality.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-41-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using the new blk_opf_t type for the
combination of a request operation and its flags.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-40-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve static type checking by using the new blk_opf_t type for variables
that represent a request operation combined with request flags. Rename
those variables from 'op' into 'opf'.
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-39-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|