summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-12Linux 5.13.10v5.13.10Greg Kroah-Hartman
Link: https://lore.kernel.org/r/20210810173000.928681411@linuxfoundation.org Tested-by: Fox Chen <foxhlchen@gmail.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Aakash Hemadri <aakashhemadri123@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12HID: ft260: fix device removal due to USB disconnectMichael Zaidman
[ Upstream commit db8d3a21275c807a4047a21bde3b57d49ca55d82 ] This commit fixes a functional regression introduced by the commit 82f09a637dd3 ("HID: ft260: improve error handling of ft260_hid_feature_report_get()") when upon USB disconnect, the FTDI FT260 i2c device is still available within the /dev folder. In my company's product, where the host USB to FT260 USB connection is hard-wired in the PCB, the issue is not reproducible. To reproduce it, I used the VirtualBox Ubuntu 20.04 VM and the UMFT260EV1A development module for the FTDI FT260 chip: Plug the UMFT260EV1A module into a USB port and attach it to VM. The VM shows 2 i2c devices under the /dev: michael@michael-VirtualBox:~$ ls /dev/i2c-* /dev/i2c-0 /dev/i2c-1 The i2c-0 is not related to the FTDI FT260: michael@michael-VirtualBox:~$ cat /sys/bus/i2c/devices/i2c-0/name SMBus PIIX4 adapter at 4100 The i2c-1 is created by hid-ft260.ko: michael@michael-VirtualBox:~$ cat /sys/bus/i2c/devices/i2c-1/name FT260 usb-i2c bridge on hidraw1 Now, detach the FTDI FT260 USB device from VM. We expect the /dev/i2c-1 to disappear, but it's still here: michael@michael-VirtualBox:~$ ls /dev/i2c-* /dev/i2c-0 /dev/i2c-1 And the kernel log shows: [ +0.001202] usb 2-2: USB disconnect, device number 3 [ +0.000109] ft260 0003:0403:6030.0002: failed to retrieve system status [ +0.000316] ft260 0003:0403:6030.0003: failed to retrieve system status It happens because the commit 82f09a637dd3 changed the ft260_get_system_config() return logic. This caused the ft260_is_interface_enabled() to exit with error upon the FT260 device USB disconnect, which in turn, aborted the ft260_remove() before deleting the FT260 i2c device and cleaning its sysfs stuff. This commit restores the FT260 USB removal functionality and improves the ft260_is_interface_enabled() code to handle correctly all chip modes defined by the device interface configuration pins DCNF0 and DCNF1. Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com> Acked-by: Aaron Jones (FTDI-UK) <aaron.jones@ftdichip.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12platform/x86: gigabyte-wmi: add support for B550 Aorus Elite V2Thomas Weißschuh
[ Upstream commit 2b2c66f607d00d17f879c0d946d44340bfbdc501 ] Reported as working here: https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-879398883 Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20210726153630.65213-1-linux@weissschuh.net Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12drm/amdgpu/display: only enable aux backlight control for OLED panelsAlex Deucher
[ Upstream commit f2ad3accefc63e72e9932e141c21875cc04beec8 ] We've gotten a number of reports about backlight control not working on panels which indicate that they use aux backlight control. A recent patch: commit 2d73eabe2984a435737498ab39bb1500a9ffe9a9 Author: Camille Cho <Camille.Cho@amd.com> Date: Thu Jul 8 18:28:37 2021 +0800 drm/amd/display: Only set default brightness for OLED [Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Camille Cho <Camille.Cho@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Changes some other code to only use aux for backlight control on OLED panels. The commit message seems to indicate that PWM should be used for SDR mode on HDR panels. Do something similar for backlight control in general. This may need to be revisited if and when HDR started to get used. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1438 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213715 Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12smb3: rc uninitialized in one fallocate pathSteve French
[ Upstream commit 5ad4df56cd2158965f73416d41fce37906724822 ] Clang detected a problem with rc possibly being unitialized (when length is zero) in a recently added fallocate code path. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ↵Letu Ren
ql_adapter_reset [ Upstream commit 92766c4628ea349c8ddab0cd7bd0488f36e5c4ce ] When calling the 'ql_wait_for_drvr_lock' and 'ql_adapter_reset', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. Reported-by: Letu Ren <fantasquex@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12alpha: Send stop IPI to send to online CPUsPrarit Bhargava
[ Upstream commit caace6ca4e06f09413fb8f8a63319594cfb7d47d ] This issue was noticed while debugging a shutdown issue where some secondary CPUs are not being shutdown correctly. A fix for that [1] requires that secondary cpus be offlined using the cpu_online_mask so that the stop operation is a no-op if CPU HOTPLUG is disabled. I, like the author in [1] looked at the architectures and found that alpha is one of two architectures that executes smp_send_stop() on all possible CPUs. On alpha, smp_send_stop() sends an IPI to all possible CPUs but only needs to send them to online CPUs. Send the stop IPI to only the online CPUs. [1] https://lkml.org/lkml/2020/1/10/250 Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: qede: Fix end of loop tests for list_for_each_entryHarshvardhan Jha
[ Upstream commit 795e3d2ea68e489ee7039ac29e98bfea0e34a96c ] The list_for_each_entry() iterator, "vlan" in this code, can never be NULL so the warning will never be printed. Signed-off-by: Harshvardhan Jha <harshvardhan.jha@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12virt_wifi: fix error on connectMatteo Croce
[ Upstream commit 17109e9783799be2a063b2bd861a508194b0a487 ] When connecting without first doing a scan, the BSS list is empty and __cfg80211_connect_result() generates this warning: $ iw dev wlan0 connect -w VirtWifi [ 15.371989] ------------[ cut here ]------------ [ 15.372179] WARNING: CPU: 0 PID: 92 at net/wireless/sme.c:756 __cfg80211_connect_result+0x402/0x440 [ 15.372383] CPU: 0 PID: 92 Comm: kworker/u2:2 Not tainted 5.13.0-kvm #444 [ 15.372512] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-3.fc34 04/01/2014 [ 15.372597] Workqueue: cfg80211 cfg80211_event_work [ 15.372756] RIP: 0010:__cfg80211_connect_result+0x402/0x440 [ 15.372818] Code: 48 2b 04 25 28 00 00 00 75 59 48 8b 3b 48 8b 76 10 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d 49 8d 65 f0 41 5d e9 d0 d4 fd ff 0f 0b <0f> 0b e9 f6 fd ff ff e8 f2 4a b4 ff e9 ec fd ff ff 0f 0b e9 19 fd [ 15.372966] RSP: 0018:ffffc900005cbdc0 EFLAGS: 00010246 [ 15.373022] RAX: 0000000000000000 RBX: ffff8880028e2400 RCX: ffff8880028e2472 [ 15.373088] RDX: 0000000000000002 RSI: 00000000fffffe01 RDI: ffffffff815335ba [ 15.373149] RBP: ffffc900005cbe00 R08: 0000000000000008 R09: ffff888002bdf8b8 [ 15.373209] R10: ffff88803ec208f0 R11: ffffffffffffe9ae R12: ffff88801d687d98 [ 15.373280] R13: ffff88801b5fe000 R14: ffffc900005cbdc0 R15: dead000000000100 [ 15.373330] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 15.373382] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.373425] CR2: 000056421c468958 CR3: 000000001b458001 CR4: 0000000000170eb0 [ 15.373478] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 15.373529] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 15.373580] Call Trace: [ 15.373611] ? cfg80211_process_wdev_events+0x10e/0x170 [ 15.373743] cfg80211_process_wdev_events+0x10e/0x170 [ 15.373783] cfg80211_process_rdev_events+0x21/0x40 [ 15.373846] cfg80211_event_work+0x20/0x30 [ 15.373892] process_one_work+0x1e9/0x340 [ 15.373956] worker_thread+0x4b/0x3f0 [ 15.374017] ? process_one_work+0x340/0x340 [ 15.374053] kthread+0x11f/0x140 [ 15.374089] ? set_kthread_struct+0x30/0x30 [ 15.374153] ret_from_fork+0x1f/0x30 [ 15.374187] ---[ end trace 321ef0cb7e9c0be1 ]--- wlan0 (phy #0): connected to 00:00:00:00:00:00 Add the fake bss just before the connect so that cfg80211_get_bss() finds the virtual network. As some code was duplicated, move it in a common function. Signed-off-by: Matteo Croce <mcroce@microsoft.com> Link: https://lore.kernel.org/r/20210706154423.11065-1-mcroce@linux.microsoft.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12reiserfs: check directory items on read from diskShreyansh Chouhan
[ Upstream commit 13d257503c0930010ef9eed78b689cec417ab741 ] While verifying the leaf item that we read from the disk, reiserfs doesn't check the directory items, this could cause a crash when we read a directory item from the disk that has an invalid deh_location. This patch adds a check to the directory items read from the disk that does a bounds check on deh_location for the directory entries. Any directory entry header with a directory entry offset greater than the item length is considered invalid. Link: https://lore.kernel.org/r/20210709152929.766363-1-chouhan.shreyansh630@gmail.com Reported-by: syzbot+c31a48e6702ccb3d64c9@syzkaller.appspotmail.com Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12reiserfs: add check for root_inode in reiserfs_fill_superYu Kuai
[ Upstream commit 2acf15b94d5b8ea8392c4b6753a6ffac3135cd78 ] Our syzcaller report a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 116e95067 P4D 116e95067 PUD 1080b5067 PMD 0 Oops: 0010 [#1] SMP KASAN CPU: 7 PID: 592 Comm: a.out Not tainted 5.13.0-next-20210629-dirty #67 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-p4 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffff888114e779b8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 1ffff110229cef39 RCX: ffffffffaa67e1aa RDX: 0000000000000000 RSI: ffff88810a58ee00 RDI: ffff8881233180b0 RBP: ffffffffac38e9c0 R08: ffffffffaa67e17e R09: 0000000000000001 R10: ffffffffb91c5557 R11: fffffbfff7238aaa R12: ffff88810a58ee00 R13: ffff888114e77aa0 R14: 0000000000000000 R15: ffff8881233180b0 FS: 00007f946163c480(0000) GS:ffff88839f1c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000001099c1000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __lookup_slow+0x116/0x2d0 ? page_put_link+0x120/0x120 ? __d_lookup+0xfc/0x320 ? d_lookup+0x49/0x90 lookup_one_len+0x13c/0x170 ? __lookup_slow+0x2d0/0x2d0 ? reiserfs_schedule_old_flush+0x31/0x130 reiserfs_lookup_privroot+0x64/0x150 reiserfs_fill_super+0x158c/0x1b90 ? finish_unfinished+0xb10/0xb10 ? bprintf+0xe0/0xe0 ? __mutex_lock_slowpath+0x30/0x30 ? __kasan_check_write+0x20/0x30 ? up_write+0x51/0xb0 ? set_blocksize+0x9f/0x1f0 mount_bdev+0x27c/0x2d0 ? finish_unfinished+0xb10/0xb10 ? reiserfs_kill_sb+0x120/0x120 get_super_block+0x19/0x30 legacy_get_tree+0x76/0xf0 vfs_get_tree+0x49/0x160 ? capable+0x1d/0x30 path_mount+0xacc/0x1380 ? putname+0x97/0xd0 ? finish_automount+0x450/0x450 ? kmem_cache_free+0xf8/0x5a0 ? putname+0x97/0xd0 do_mount+0xe2/0x110 ? path_mount+0x1380/0x1380 ? copy_mount_options+0x69/0x140 __x64_sys_mount+0xf0/0x190 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae This is because 'root_inode' is initialized with wrong mode, and it's i_op is set to 'reiserfs_special_inode_operations'. Thus add check for 'root_inode' to fix the problem. Link: https://lore.kernel.org/r/20210702040743.1918552-1-yukuai3@huawei.com Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12libata: fix ata_pio_sector for CONFIG_HIGHMEMChristoph Hellwig
[ Upstream commit ecef6a9effe49e8e2635c839020b9833b71e934c ] Data transfers are not required to be block aligned in memory, so they span two pages. Fix this by splitting the call to >sff_data_xfer into two for that case. This has been broken since the initial libata import before the damn of git, but was uncovered by the legacy ide driver removal. Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210709130237.3730959-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12riscv: dts: fix memory size for the SiFive HiFive UnmatchedQiu Wenbo
commit d09560435cb712c9ec1e62b8a43a79b0af69fe77 upstream. The production version of HiFive Unmatched have 16GB memory. Signed-off-by: Qiu Wenbo <qiuwenbo@kylinos.com.cn> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12sched/rt: Fix double enqueue caused by rt_effective_prioPeter Zijlstra
commit f558c2b834ec27e75d37b1c860c139e7b7c3a8e4 upstream. Double enqueues in rt runqueues (list) have been reported while running a simple test that spawns a number of threads doing a short sleep/run pattern while being concurrently setscheduled between rt and fair class. WARNING: CPU: 3 PID: 2825 at kernel/sched/rt.c:1294 enqueue_task_rt+0x355/0x360 CPU: 3 PID: 2825 Comm: setsched__13 RIP: 0010:enqueue_task_rt+0x355/0x360 Call Trace: __sched_setscheduler+0x581/0x9d0 _sched_setscheduler+0x63/0xa0 do_sched_setscheduler+0xa0/0x150 __x64_sys_sched_setscheduler+0x1a/0x30 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae list_add double add: new=ffff9867cb629b40, prev=ffff9867cb629b40, next=ffff98679fc67ca0. kernel BUG at lib/list_debug.c:31! invalid opcode: 0000 [#1] PREEMPT_RT SMP PTI CPU: 3 PID: 2825 Comm: setsched__13 RIP: 0010:__list_add_valid+0x41/0x50 Call Trace: enqueue_task_rt+0x291/0x360 __sched_setscheduler+0x581/0x9d0 _sched_setscheduler+0x63/0xa0 do_sched_setscheduler+0xa0/0x150 __x64_sys_sched_setscheduler+0x1a/0x30 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae __sched_setscheduler() uses rt_effective_prio() to handle proper queuing of priority boosted tasks that are setscheduled while being boosted. rt_effective_prio() is however called twice per each __sched_setscheduler() call: first directly by __sched_setscheduler() before dequeuing the task and then by __setscheduler() to actually do the priority change. If the priority of the pi_top_task is concurrently being changed however, it might happen that the two calls return different results. If, for example, the first call returned the same rt priority the task was running at and the second one a fair priority, the task won't be removed by the rt list (on_list still set) and then enqueued in the fair runqueue. When eventually setscheduled back to rt it will be seen as enqueued already and the WARNING/BUG be issued. Fix this by calling rt_effective_prio() only once and then reusing the return value. While at it refactor code as well for clarity. Concurrent priority inheritance handling is still safe and will eventually converge to a new state by following the inheritance chain(s). Fixes: 0782e63bc6fe ("sched: Handle priority boosted tasks proper in setscheduler()") [squashed Peterz changes; added changelog] Reported-by: Mark Simmons <msimmons@redhat.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210803104501.38333-1-juri.lelli@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guestLike Xu
commit df51fe7ea1c1c2c3bfdb81279712fdd2e4ea6c27 upstream. If we use "perf record" in an AMD Milan guest, dmesg reports a #GP warning from an unchecked MSR access error on MSR_F15H_PERF_CTLx: [] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000110076) at rIP: 0xffffffff8106ddb4 (native_write_msr+0x4/0x20) [] Call Trace: [] amd_pmu_disable_event+0x22/0x90 [] x86_pmu_stop+0x4c/0xa0 [] x86_pmu_del+0x3a/0x140 The AMD64_EVENTSEL_HOSTONLY bit is defined and used on the host, while the guest perf driver should avoid such use. Fixes: 1018faa6cf23 ("perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled") Signed-off-by: Like Xu <likexu@tencent.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Tested-by: Kim Phillips <kim.phillips@amd.com> Tested-by: Liam Merwick <liam.merwick@oracle.com> Link: https://lkml.kernel.org/r/20210802070850.35295-1-likexu@tencent.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12soc: ixp4xx/qmgr: fix invalid __iomem accessArnd Bergmann
commit a8eee86317f11e97990d755d4615c1c0db203d08 upstream. Sparse reports a compile time warning when dereferencing an __iomem pointer: drivers/soc/ixp4xx/ixp4xx-qmgr.c:149:37: warning: dereference of noderef expression drivers/soc/ixp4xx/ixp4xx-qmgr.c:153:40: warning: dereference of noderef expression drivers/soc/ixp4xx/ixp4xx-qmgr.c:154:40: warning: dereference of noderef expression drivers/soc/ixp4xx/ixp4xx-qmgr.c:174:38: warning: dereference of noderef expression drivers/soc/ixp4xx/ixp4xx-qmgr.c:174:44: warning: dereference of noderef expression Use __raw_readl() here for consistency with the rest of the file. This should really get converted to some proper accessor, as the __raw functions are not meant to be used in drivers, but the driver has used these since the start, so for the moment, let's only fix the warning. Reported-by: kernel test robot <lkp@intel.com> Fixes: d4c9e9fc9751 ("IXP42x: Add QMgr support for IXP425 rev. A0 processors.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12drm/i915: Correct SFC_DONE register offsetMatt Roper
commit 9c9c6d0ab08acfe41c9f7efa72c4ad3f133a266b upstream. The register offset for SFC_DONE was missing a '0' at the end, causing us to read from a non-existent register address. We only use this register in error state dumps so the mistake hasn't caused any real problems, but fixing it will hopefully make the error state dumps a bit more useful for debugging. Fixes: e50dbdbfd9fb ("drm/i915/tgl: Add SFC instdone to error state") Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210728233411.2365788-1-matthew.d.roper@intel.com Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> (cherry picked from commit 82929a2140eb99f1f1d21855f3f580e70d7abdd8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12interconnect: qcom: icc-rpmh: Ensure floor BW is enforced for all nodesMike Tipton
commit ce5a595744126be4f1327e29e3c5ae9aac6b38d5 upstream. We currently only enforce BW floors for a subset of nodes in a path. All BCMs that need updating are queued in the pre_aggregate/aggregate phase. The first set() commits all queued BCMs and subsequent set() calls short-circuit without committing anything. Since the floor BW isn't set in sum_avg/max_peak until set(), then some BCMs are committed before their associated nodes reflect the floor. Set the floor as each node is being aggregated. This ensures that all all relevant floors are set before the BCMs are committed. Fixes: 266cd33b5913 ("interconnect: qcom: Ensure that the floor bandwidth value is enforced") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20210721175432.2119-4-mdtipton@codeaurora.org [georgi: Removed unused variable] Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12interconnect: Always call pre_aggregate before aggregateMike Tipton
commit 73606ba9242f8e32023699b500b7922b4cf2993c upstream. The pre_aggregate callback isn't called in all cases before calling aggregate. Add the missing calls so providers can rely on consistent framework behavior. Fixes: d3703b3e255f ("interconnect: Aggregate before setting initial bandwidth") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20210721175432.2119-3-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12interconnect: Zero initial BW after sync-stateMike Tipton
commit 456a9dace42ecfcec7ce6e17c18d1985d628dcd0 upstream. The initial BW values may be used by providers to enforce floors. Zero these values after sync-state so that providers know when to stop enforcing them. Fixes: b1d681d8d324 ("interconnect: Add sync state support") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20210721175432.2119-2-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12spi: meson-spicc: fix memory leak in meson_spicc_removeDongliang Mu
commit 8311ee2164c5cd1b63a601ea366f540eae89f10e upstream. In meson_spicc_probe, the error handling code needs to clean up master by calling spi_master_put, but the remove function does not have this function call. This will lead to memory leak of spicc->master. Reported-by: Dongliang Mu <mudongliangabcd@gmail.com> Fixes: 454fa271bc4e("spi: Add Meson SPICC driver") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Link: https://lore.kernel.org/r/20210720100116.1438974-1-mudongliangabcd@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12usb: cdnsp: Fix incorrect supported maximum speedPawel Laszczak
commit aa82f94e869edd72f4fadb08c6ffca8927e4934e upstream. Driver had hardcoded in initialization maximum supported speed to USB_SPEED_SUPER_PLUS but it should consider the speed returned from usb_get_maximum_speed function. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20210625102502.26336-1-pawell@gli-login.cadence.com Signed-off-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12usb: cdnsp: Fix the IMAN_IE_SET and IMAN_IE_CLEAR macroChristophe JAILLET
commit 5df09c15bab98463203c83ecab88b9321466e626 upstream. IMAN_IE is BIT(1), so these macro are respectively equivalent to BIT(1) and 0, whatever the value of 'p'. The purpose was to set and reset a single bit in 'p'. Fix these macros to do that correctly. Acked-by: Pawel Laszczak <pawell@cadence.com> Fixes: e93e58d27402 ("usb: cdnsp: Device side header file for CDNSP driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/d12bfcc9cbffb89e27b120668821b3c4f09b6755.1624390584.git.christophe.jaillet@wanadoo.fr Signed-off-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12interconnect: Fix undersized devress_alloc allocationColin Ian King
commit 85b1ebfea2b0d8797266bcc6f04b6cc87e38290a upstream. The expression sizeof(**ptr) for the void **ptr is just 1 rather than the size of a pointer. Fix this by using sizeof(*ptr). Addresses-Coverity: ("Wrong sizeof argument") Fixes: e145d9a184f2 ("interconnect: Add devm_of_icc_get() as exported API for users") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210730075408.19945-1-colin.king@canonical.com Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12soc: ixp4xx: fix printing resourcesArnd Bergmann
commit 8861452b2097bb0b5d0081a1c137fb3870b0a31f upstream. When compile-testing with 64-bit resource_size_t, gcc reports an invalid printk format string: In file included from include/linux/dma-mapping.h:7, from drivers/soc/ixp4xx/ixp4xx-npe.c:15: drivers/soc/ixp4xx/ixp4xx-npe.c: In function 'ixp4xx_npe_probe': drivers/soc/ixp4xx/ixp4xx-npe.c:694:18: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=] dev_info(dev, "NPE%d at 0x%08x-0x%08x not available\n", Use the special %pR format string to print the resources. Fixes: 0b458d7b10f8 ("soc: ixp4xx: npe: Pass addresses as resources") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12KVM: x86/mmu: Fix per-cpu counter corruption on 32-bit buildsSean Christopherson
commit d5aaad6f83420efb8357ac8e11c868708b22d0a9 upstream. Take a signed 'long' instead of an 'unsigned long' for the number of pages to add/subtract to the total number of pages used by the MMU. This fixes a zero-extension bug on 32-bit kernels that effectively corrupts the per-cpu counter used by the shrinker. Per-cpu counters take a signed 64-bit value on both 32-bit and 64-bit kernels, whereas kvm_mod_used_mmu_pages() takes an unsigned long and thus an unsigned 32-bit value on 32-bit kernels. As a result, the value used to adjust the per-cpu counter is zero-extended (unsigned -> signed), not sign-extended (signed -> signed), and so KVM's intended -1 gets morphed to 4294967295 and effectively corrupts the counter. This was found by a staggering amount of sheer dumb luck when running kvm-unit-tests on a 32-bit KVM build. The shrinker just happened to kick in while running tests and do_shrink_slab() logged an error about trying to free a negative number of objects. The truly lucky part is that the kernel just happened to be a slightly stale build, as the shrinker no longer yells about negative objects as of commit 18bb473e5031 ("mm: vmscan: shrink deferred objects proportional to priority"). vmscan: shrink_slab: mmu_shrink_scan+0x0/0x210 [kvm] negative objects to delete nr=-858993460 Fixes: bc8a3d8925a8 ("kvm: mmu: Fix overflow on kvm mmu page limit calculation") Cc: stable@vger.kernel.org Cc: Ben Gardon <bgardon@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210804214609.1096003-1-seanjc@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12KVM: Do not leak memory for duplicate debugfs directoriesPaolo Bonzini
commit 85cd39af14f498f791d8aab3fbd64cd175787f1a upstream. KVM creates a debugfs directory for each VM in order to store statistics about the virtual machine. The directory name is built from the process pid and a VM fd. While generally unique, it is possible to keep a file descriptor alive in a way that causes duplicate directories, which manifests as these messages: [ 471.846235] debugfs: Directory '20245-4' with parent 'kvm' already present! Even though this should not happen in practice, it is more or less expected in the case of KVM for testcases that call KVM_CREATE_VM and close the resulting file descriptor repeatedly and in parallel. When this happens, debugfs_create_dir() returns an error but kvm_create_vm_debugfs() goes on to allocate stat data structs which are later leaked. The slow memory leak was spotted by syzkaller, where it caused OOM reports. Since the issue only affects debugfs, do a lookup before calling debugfs_create_dir, so that the message is downgraded and rate-limited. While at it, ensure kvm->debugfs_dentry is NULL rather than an error if it is not created. This fixes kvm_destroy_vm_debugfs, which was not checking IS_ERR_OR_NULL correctly. Cc: stable@vger.kernel.org Fixes: 536a6f88c49d ("KVM: Create debugfs dir and stat files for each VM") Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12KVM: SVM: Fix off-by-one indexing when nullifying last used SEV VMCBSean Christopherson
commit 179c6c27bf487273652efc99acd3ba512a23c137 upstream. Use the raw ASID, not ASID-1, when nullifying the last used VMCB when freeing an SEV ASID. The consumer, pre_sev_run(), indexes the array by the raw ASID, thus KVM could get a false negative when checking for a different VMCB if KVM manages to reallocate the same ASID+VMCB combo for a new VM. Note, this cannot cause a functional issue _in the current code_, as pre_sev_run() also checks which pCPU last did VMRUN for the vCPU, and last_vmentry_cpu is initialized to -1 during vCPU creation, i.e. is guaranteed to mismatch on the first VMRUN. However, prior to commit 8a14fe4f0c54 ("kvm: x86: Move last_cpu into kvm_vcpu_arch as last_vmentry_cpu"), SVM tracked pCPU on its own and zero-initialized the last_cpu variable. Thus it's theoretically possible that older versions of KVM could miss a TLB flush if the first VMRUN is on pCPU0 and the ASID and VMCB exactly match those of a prior VM. Fixes: 70cd94e60c73 ("KVM: SVM: VMRUN should use associated ASID when SEV is enabled") Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12KVM: x86: accept userspace interrupt only if no event is injectedPaolo Bonzini
commit fa7a549d321a4189677b0cea86e58d9db7977f7b upstream. Once an exception has been injected, any side effects related to the exception (such as setting CR2 or DR6) have been taked place. Therefore, once KVM sets the VM-entry interruption information field or the AMD EVENTINJ field, the next VM-entry must deliver that exception. Pending interrupts are processed after injected exceptions, so in theory it would not be a problem to use KVM_INTERRUPT when an injected exception is present. However, DOSEMU is using run->ready_for_interrupt_injection to detect interrupt windows and then using KVM_SET_SREGS/KVM_SET_REGS to inject the interrupt manually. For this to work, the interrupt window must be delayed after the completion of the previous event injection. Cc: stable@vger.kernel.org Reported-by: Stas Sergeev <stsp2@yandex.ru> Tested-by: Stas Sergeev <stsp2@yandex.ru> Fixes: 71cc849b7093 ("KVM: x86: Fix split-irqchip vs interrupt injection window request") Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12s390/dasd: fix use after free in dasd path handlingStefan Haberland
commit 952835edb4fdad49361d5330da918be8b765b787 upstream. When new configuration data is obtained after a path event it is stored in the per path array. The old data needs to be freed. The first valid configuration data is also referenced in the device private structure to identify the device. When the old per path configuration data was freed the device still pointed to the already freed data leading to a use after free. Fix by replacing also the device configuration data with the newly obtained one before the old data gets freed. Fixes: 460181217a24 ("s390/dasd: Store path configuration data during path handling") Cc: stable@vger.kernel.org # 5.11+ Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20210804151800.4031761-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12io-wq: fix race between worker exiting and activating free workerJens Axboe
commit 83d6c39310b6d11199179f6384c2b0a415389597 upstream. Nadav correctly reports that we have a race between a worker exiting, and new work being queued. This can lead to work being queued behind an existing worker that could be sleeping on an event before it can run to completion, and hence introducing potential big latency gaps if we hit this race condition: cpu0 cpu1 ---- ---- io_wqe_worker() schedule_timeout() // timed out io_wqe_enqueue() io_wqe_wake_worker() // work_flags & IO_WQ_WORK_CONCURRENT io_wqe_activate_free_worker() io_worker_exit() Fix this by having the exiting worker go through the normal decrement of a running worker, which will spawn a new one if needed. The free worker activation is modified to only return success if we were able to find a sleeping worker - if not, we keep looking through the list. If we fail, we create a new worker as per usual. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/io-uring/BFF746C0-FEDE-4646-A253-3021C57C26C9@gmail.com/ Reported-by: Nadav Amit <nadav.amit@gmail.com> Tested-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12md/raid10: properly indicate failure when ending a failed write requestWei Shuyu
commit 5ba03936c05584b6f6f79be5ebe7e5036c1dd252 upstream. Similar to [1], this patch fixes the same bug in raid10. Also cleanup the comments. [1] commit 2417b9869b81 ("md/raid1: properly indicate failure when ending a failed write request") Cc: stable@vger.kernel.org Fixes: 7cee6d4e6035 ("md/raid10: end bio when the device faulty") Signed-off-by: Wei Shuyu <wsy@dogben.com> Acked-by: Guoqing Jiang <jiangguoqing@kylinos.cn> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12ARM: omap2+: hwmod: fix potential NULL pointer accessTero Kristo
commit b070f9ca78680486927b799cf6126b128a7c2c1b upstream. omap_hwmod_get_pwrdm() may access a NULL clk_hw pointer in some failure cases. Add a check for the case and bail out gracely if this happens. Reported-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12arm64: fix compat syscall return truncationMark Rutland
commit e30e8d46cf605d216a799a28c77b8a41c328613a upstream. Due to inconsistencies in the way we manipulate compat GPRs, we have a few issues today: * For audit and tracing, where error codes are handled as a (native) long, negative error codes are expected to be sign-extended to the native 64-bits, or they may fail to be matched correctly. Thus a syscall which fails with an error may erroneously be identified as failing. * For ptrace, *all* compat return values should be sign-extended for consistency with 32-bit arm, but we currently only do this for negative return codes. * As we may transiently set the upper 32 bits of some compat GPRs while in the kernel, these can be sampled by perf, which is somewhat confusing. This means that where a syscall returns a pointer above 2G, this will be sign-extended, but will not be mistaken for an error as error codes are constrained to the inclusive range [-4096, -1] where no user pointer can exist. To fix all of these, we must consistently use helpers to get/set the compat GPRs, ensuring that we never write the upper 32 bits of the return code, and always sign-extend when reading the return code. This patch does so, with the following changes: * We re-organise syscall_get_return_value() to always sign-extend for compat tasks, and reimplement syscall_get_error() atop. We update syscall_trace_exit() to use syscall_get_return_value(). * We consistently use syscall_set_return_value() to set the return value, ensureing the upper 32 bits are never set unexpectedly. * As the core audit code currently uses regs_return_value() rather than syscall_get_return_value(), we special-case this for compat_user_mode(regs) such that this will do the right thing. Going forward, we should try to move the core audit code over to syscall_get_return_value(). Cc: <stable@vger.kernel.org> Reported-by: He Zhe <zhe.he@windriver.com> Reported-by: weiyuchen <weiyuchen3@huawei.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20210802104200.21390-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12Revert "gpio: mpc8xxx: change the gpio interrupt flags."Rasmus Villemoes
commit ec7099fdea8025988710ee6fecfd4e4210c29ab5 upstream. This reverts commit 3d5bfbd9716318b1ca5c38488aa69f64d38a9aa5. When booting with threadirqs, it causes a splat WARNING: CPU: 0 PID: 29 at kernel/irq/handle.c:159 __handle_irq_event_percpu+0x1ec/0x27c irq 66 handler irq_default_primary_handler+0x0/0x1c enabled interrupts That splat later went away with commit 81e2073c175b ("genirq: Disable interrupts for force threaded handlers"), which got backported to -stable. However, when running an -rt kernel, the splat still exists. Moreover, quoting Thomas Gleixner [1] But 3d5bfbd97163 ("gpio: mpc8xxx: change the gpio interrupt flags.") has nothing to do with that: "Delete the interrupt IRQF_NO_THREAD flags in order to gpio interrupts can be threaded to allow high-priority processes to preempt." This changelog is blatantly wrong. In mainline forced irq threads have always been invoked with softirqs disabled, which obviously makes them non-preemptible. So the patch didn't even do what its commit log said. [1] https://lore.kernel.org/lkml/871r8zey88.ffs@nanos.tec.linutronix.de/ Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12bus: ti-sysc: AM3: RNG is GP onlyKevin Hilman
commit a6d90e9f22328f07343e49e08a4ca483ae8e8abb upstream. Make the RNG on AM3 GP only. Based on this patch from TI v5.4 tree which is based on hwmod data which are now removed: | ARM: AM43xx: hwmod: Move RNG to a GP only links table | | On non-GP devices the RNG is controlled by the secure-side software, | like in DRA7xx hwmod we should not control this IP when we are not | a GP device. | | Signed-off-by: Andrew F. Davis <afd@ti.com> Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12selinux: correct the return value when loads initial sidsXiu Jianfeng
commit 4c156084daa8ee70978e4b150b5eb5fc7b1f15be upstream. It should not return 0 when SID 0 is assigned to isids. This patch fixes it. Cc: stable@vger.kernel.org Fixes: e3e0b582c321a ("selinux: remove unused initial SIDs and improve handling") Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> [PM: remove changelog from description] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12scsi: ibmvfc: Fix command state accounting and stale response detectionTyrel Datwyler
commit a264cf5e81c78e2b9918b8b9ef2ace9dde1850df upstream. Prior to commit 1f4a4a19508d ("scsi: ibmvfc: Complete commands outside the host/queue lock") responses to commands were completed sequentially with the host lock held such that a command had a basic binary state of active or free. It was therefore a simple affair of ensuring the assocaiated ibmvfc_event to a VIOS response was valid by testing that it was not already free. The lock relexation work to complete commands outside the lock inadverdently made it a trinary command state such that a command is either in flight, received and being completed, or completed and now free. This breaks the stale command detection logic as a command may be still marked active and been placed on the delayed completion list when a second stale response for the same command arrives. This can lead to double completions and list corruption. This issue was exposed by a recent VIOS regression were a missing memory barrier could occasionally result in the ibmvfc client receiving a duplicate response for the same command. Fix the issue by introducing the atomic ibmvfc_event.active to track the trinary state of a command. The state is explicitly set to 1 when a command is successfully sent. The CRQ response handlers use atomic_dec_if_positive() to test for stale responses and correctly transition to the completion state when a active command is received. Finally, atomic_dec_and_test() is used to sanity check transistions when commands are freed as a result of a completion, or moved to the purge list as a result of error handling or adapter reset. Link: https://lore.kernel.org/r/20210716205220.1101150-1-tyreld@linux.ibm.com Fixes: 1f4a4a19508d ("scsi: ibmvfc: Complete commands outside the host/queue lock") Cc: stable@vger.kernel.org Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12pcmcia: i82092: fix a null pointer dereference bugZheyu Ma
commit e39cdacf2f664b09029e7c1eb354c91a20c367af upstream. During the driver loading process, the 'dev' field was not assigned, but the 'dev' field was referenced in the subsequent 'i82092aa_set_mem_map' function. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> CC: <stable@vger.kernel.org> [linux@dominikbrodowski.net: shorten commit message, add Cc to stable] Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12net/xfrm/compat: Copy xfrm_spdattr_type_t atributesDmitry Safonov
commit 4e9505064f58d1252805952f8547a5b7dbc5c111 upstream. The attribute-translator has to take in mind maxtype, that is xfrm_link::nla_max. When it is set, attributes are not of xfrm_attr_type_t. Currently, they can be only XFRMA_SPD_MAX (message XFRM_MSG_NEWSPDINFO), their UABI is the same for 64/32-bit, so just copy them. Thanks to YueHaibing for reporting this: In xfrm_user_rcv_msg_compat() if maxtype is not zero and less than XFRMA_MAX, nlmsg_parse_deprecated() do not initialize attrs array fully. xfrm_xlate32() will access uninit 'attrs[i]' while iterating all attrs array. KASAN: probably user-memory-access in range [0x0000000041b58ab0-0x0000000041b58ab7] CPU: 0 PID: 15799 Comm: syz-executor.2 Tainted: G W 5.14.0-rc1-syzkaller #0 RIP: 0010:nla_type include/net/netlink.h:1130 [inline] RIP: 0010:xfrm_xlate32_attr net/xfrm/xfrm_compat.c:410 [inline] RIP: 0010:xfrm_xlate32 net/xfrm/xfrm_compat.c:532 [inline] RIP: 0010:xfrm_user_rcv_msg_compat+0x5e5/0x1070 net/xfrm/xfrm_compat.c:577 [...] Call Trace: xfrm_user_rcv_msg+0x556/0x8b0 net/xfrm/xfrm_user.c:2774 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 xfrm_netlink_rcv+0x6b/0x90 net/xfrm/xfrm_user.c:2824 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:702 [inline] Fixes: 5106f4a8acff ("xfrm/compat: Add 32=>64-bit messages translator") Cc: <stable@kernel.org> Reported-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12xfrm: Fix RCU vs hash_resize_mutex lock inversionFrederic Weisbecker
commit 2580d3f40022642452dd8422bfb8c22e54cf84bb upstream. xfrm_bydst_resize() calls synchronize_rcu() while holding hash_resize_mutex. But then on PREEMPT_RT configurations, xfrm_policy_lookup_bytype() may acquire that mutex while running in an RCU read side critical section. This results in a deadlock. In fact the scope of hash_resize_mutex is way beyond the purpose of xfrm_policy_lookup_bytype() to just fetch a coherent and stable policy for a given destination/direction, along with other details. The lower level net->xfrm.xfrm_policy_lock, which among other things protects per destination/direction references to policy entries, is enough to serialize and benefit from priority inheritance against the write side. As a bonus, it makes it officially a per network namespace synchronization business where a policy table resize on namespace A shouldn't block a policy lookup on namespace B. Fixes: 77cc278f7b20 (xfrm: policy: Use sequence counters with associated lock) Cc: stable@vger.kernel.org Cc: Ahmed S. Darwish <a.darwish@linutronix.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Varad Gautam <varad.gautam@suse.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12perf: Fix required permissions if sigtrap is requestedMarco Elver
commit 9d7a6c95f62bc335b62aaf9d50590122bd03a796 upstream. If perf_event_open() is called with another task as target and perf_event_attr::sigtrap is set, and the target task's user does not match the calling user, also require the CAP_KILL capability or PTRACE_MODE_ATTACH permissions. Otherwise, with the CAP_PERFMON capability alone it would be possible for a user to send SIGTRAP signals via perf events to another user's tasks. This could potentially result in those tasks being terminated if they cannot handle SIGTRAP signals. Note: The check complements the existing capability check, but is not supposed to supersede the ptrace_may_access() check. At a high level we now have: capable of CAP_PERFMON and (CAP_KILL if sigtrap) OR ptrace_may_access(...) // also checks for same thread-group and uid Fixes: 97ba62b27867 ("perf: Add support for SIGTRAP on perf events") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> # 5.13+ Link: https://lore.kernel.org/r/20210705084453.2151729-1-elver@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12virt: acrn: Do hcall_destroy_vm() before resource releaseShuo Liu
commit 4c4c1257b844ffe5d0933684e612f92c4b78e120 upstream. The ACRN hypervisor has scenarios which could run a real-time guest VM. The real-time guest VM occupies dedicated CPU cores, be assigned with dedicated PCI devices. It can run without the Service VM after boot up. hcall_destroy_vm() returns failure when a real-time guest VM refuses. The clearing of flag ACRN_VM_FLAG_DESTROYED causes some kernel resource double-freed in a later acrn_vm_destroy(). Do hcall_destroy_vm() before resource release to drop this chance to destroy the VM if hypercall fails. Fixes: 9c5137aedd11 ("virt: acrn: Introduce VM management interfaces") Cc: stable <stable@vger.kernel.org> Signed-off-by: Shuo Liu <shuo.a.liu@intel.com> Signed-off-by: Fei Li <fei1.li@intel.com> Link: https://lore.kernel.org/r/20210722062736.15050-1-fei1.li@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12timers: Move clearing of base::timer_running under base:: LockThomas Gleixner
commit bb7262b295472eb6858b5c49893954794027cd84 upstream. syzbot reported KCSAN data races vs. timer_base::timer_running being set to NULL without holding base::lock in expire_timers(). This looks innocent and most reads are clearly not problematic, but Frederic identified an issue which is: int data = 0; void timer_func(struct timer_list *t) { data = 1; } CPU 0 CPU 1 ------------------------------ -------------------------- base = lock_timer_base(timer, &flags); raw_spin_unlock(&base->lock); if (base->running_timer != timer) call_timer_fn(timer, fn, baseclk); ret = detach_if_pending(timer, base, true); base->running_timer = NULL; raw_spin_unlock_irqrestore(&base->lock, flags); raw_spin_lock(&base->lock); x = data; If the timer has previously executed on CPU 1 and then CPU 0 can observe base->running_timer == NULL and returns, assuming the timer has completed, but it's not guaranteed on all architectures. The comment for del_timer_sync() makes that guarantee. Moving the assignment under base->lock prevents this. For non-RT kernel it's performance wise completely irrelevant whether the store happens before or after taking the lock. For an RT kernel moving the store under the lock requires an extra unlock/lock pair in the case that there is a waiter for the timer, but that's not the end of the world. Reported-by: syzbot+aa7c2385d46c5eba0b89@syzkaller.appspotmail.com Reported-by: syzbot+abea4558531bae1ba9fe@syzkaller.appspotmail.com Fixes: 030dcdd197d7 ("timers: Prepare support for PREEMPT_RT") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/87lfea7gw8.fsf@nanos.tec.linutronix.de Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12fpga: dfl: fme: Fix cpu hotplug issue in performance reportingKajol Jain
commit ec6446d5304b3c3dd692a1e244df7e40bbb5af36 upstream. The performance reporting driver added cpu hotplug feature but it didn't add pmu migration call in cpu offline function. This can create an issue incase the current designated cpu being used to collect fme pmu data got offline, as based on current code we are not migrating fme pmu to new target cpu. Because of that perf will still try to fetch data from that offline cpu and hence we will not get counter data. Patch fixed this issue by adding pmu_migrate_context call in fme_perf_offline_cpu function. Fixes: 724142f8c42a ("fpga: dfl: fme: add performance reporting support") Cc: stable@vger.kernel.org Tested-by: Xu Yilun <yilun.xu@intel.com> Acked-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12serial: 8250_pci: Avoid irq sharing for MSI(-X) interrupts.Mario Kleiner
commit 341abd693d10e5f337a51f140ae3e7a1ae0febf6 upstream. This attempts to fix a bug found with a serial port card which uses an MCS9922 chip, one of the 4 models for which MSI-X interrupts are currently supported. I don't possess such a card, and i'm not experienced with the serial subsystem, so this patch is based on what i think i found as a likely reason for failure, based on walking the user who actually owns the card through some diagnostic. The user who reported the problem finds the following in his dmesg output for the relevant ttyS4 and ttyS5: [ 0.580425] serial 0000:02:00.0: enabling device (0000 -> 0003) [ 0.601448] 0000:02:00.0: ttyS4 at I/O 0x3010 (irq = 125, base_baud = 115200) is a ST16650V2 [ 0.603089] serial 0000:02:00.1: enabling device (0000 -> 0003) [ 0.624119] 0000:02:00.1: ttyS5 at I/O 0x3000 (irq = 126, base_baud = 115200) is a ST16650V2 ... [ 6.323784] genirq: Flags mismatch irq 128. 00000080 (ttyS5) vs. 00000000 (xhci_hcd) [ 6.324128] genirq: Flags mismatch irq 128. 00000080 (ttyS5) vs. 00000000 (xhci_hcd) ... Output of setserial -a: /dev/ttyS4, Line 4, UART: 16650V2, Port: 0x3010, IRQ: 127 Baud_base: 115200, close_delay: 50, divisor: 0 closing_wait: 3000 Flags: spd_normal skip_test This suggests to me that the serial driver wants to register and share a MSI/MSI-X irq 128 with the xhci_hcd driver, whereas the xhci driver does not want to share the irq, as flags 0x00000080 (== IRQF_SHARED) from the serial port driver means to share the irq, and this mismatch ends in some failed irq init? With this setup, data reception works very unreliable, with dropped data, already at a transmission rate of only a 16 Bytes chunk every 1/120th of a second, ie. 1920 Bytes/sec, presumably due to rx fifo overflow due to mishandled or not used at all rx irq's? See full discussion thread with attempted diagnosis at: https://psychtoolbox.discourse.group/t/issues-with-iscan-serial-port-recording/3886 Disabling the use of MSI interrupts for the serial port pci card did fix the reliability problems. The user executed the following sequence of commands to achieve this: echo 0000:02:00.0 | sudo tee /sys/bus/pci/drivers/serial/unbind echo 0000:02:00.1 | sudo tee /sys/bus/pci/drivers/serial/unbind echo 0 | sudo tee /sys/bus/pci/devices/0000:02:00.0/msi_bus echo 0 | sudo tee /sys/bus/pci/devices/0000:02:00.1/msi_bus echo 0000:02:00.0 | sudo tee /sys/bus/pci/drivers/serial/bind echo 0000:02:00.1 | sudo tee /sys/bus/pci/drivers/serial/bind This resulted in the following log output: [ 82.179021] pci 0000:02:00.0: MSI/MSI-X disallowed for future drivers [ 87.003031] pci 0000:02:00.1: MSI/MSI-X disallowed for future drivers [ 98.537010] 0000:02:00.0: ttyS4 at I/O 0x3010 (irq = 17, base_baud = 115200) is a ST16650V2 [ 103.648124] 0000:02:00.1: ttyS5 at I/O 0x3000 (irq = 18, base_baud = 115200) is a ST16650V2 This patch attempts to fix the problem by disabling irq sharing when using MSI irq's. Note that all i know for sure is that disabling MSI irq's fixed the problem for the user, so this patch could be wrong and is untested. Please review with caution, keeping this in mind. Fixes: 8428413b1d14 ("serial: 8250_pci: Implement MSI(-X) support") Cc: Ralf Ramsauer <ralf.ramsauer@oth-regensburg.de> Cc: stable <stable@vger.kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Link: https://lore.kernel.org/r/20210729043306.18528-1-mario.kleiner.de@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12serial: 8250_pci: Enumerate Elkhart Lake UARTs via dedicated driverAndy Shevchenko
commit 7f0909db761535aefafa77031062603a71557267 upstream. Elkhart Lake UARTs are PCI enumerated Synopsys DesignWare v4.0+ UART integrated with Intel iDMA 32-bit DMA controller. There is a specific driver to handle them, i.e. 8250_lpss. Hence, disable 8250_pci enumeration for these UARTs. Fixes: 1b91d97c66ef ("serial: 8250_lpss: Add ->setup() for Elkhart Lake ports") Fixes: 4f912b898dc2 ("serial: 8250_lpss: Enable HS UART on Elkhart Lake") Cc: stable <stable@vger.kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210713101739.36962-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12MIPS: Malta: Do not byte-swap accesses to the CBUS UARTMaciej W. Rozycki
commit 9a936d6c3d3d6c33ecbadf72dccdb567b5cd3c72 upstream. Correct big-endian accesses to the CBUS UART, a Malta on-board discrete TI16C550C part wired directly to the system controller's device bus, and do not use byte swapping with the 32-bit accesses to the device. The CBUS is used for devices such as the boot flash memory needed early on in system bootstrap even before PCI has been initialised. Therefore it uses the system controller's device bus, which follows the endianness set with the CPU, which means no byte-swapping is ever required for data accesses to CBUS, unlike with PCI. The CBUS UART uses the UPIO_MEM32 access method, that is the `readl' and `writel' MMIO accessors, which on the MIPS platform imply byte-swapping with PCI systems. Consequently the wrong byte lane is accessed with the big-endian configuration and the UART is not correctly accessed. As it happens the UPIO_MEM32BE access method makes use of the `ioread32' and `iowrite32' MMIO accessors, which still use `readl' and `writel' respectively, however they byte-swap data passed, effectively cancelling swapping done with the accessors themselves and making it suitable for the CBUS UART. Make the CBUS UART switch between UPIO_MEM32 and UPIO_MEM32BE then, based on the endianness selected. With this change in place the device is correctly recognised with big-endian Malta at boot, along with the Super I/O devices behind PCI: Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled printk: console [ttyS0] disabled serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A printk: console [ttyS0] enabled printk: bootconsole [uart8250] disabled serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A serial8250.0: ttyS2 at MMIO 0x1f000900 (irq = 20, base_baud = 230400) is a 16550A Fixes: e7c4782f92fc ("[MIPS] Put an end to <asm/serial.h>'s long and annyoing existence") Cc: stable@vger.kernel.org # v2.6.23+ Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260524430.37803@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12serial: 8250: fix handle_irq lockingJohan Hovold
commit 853a9ae29e978d37f5dfa72622a68c9ae3d7fa89 upstream. The 8250 handle_irq callback is not just called from the interrupt handler but also from a timer callback when polling (e.g. for ports without an interrupt line). Consequently the callback must explicitly disable interrupts to avoid a potential deadlock with another interrupt in polled mode. Add back an irqrestore-version of the sysrq port-unlock helper and use it in the 8250 callbacks that need it. Fixes: 75f4e830fa9c ("serial: do not restore interrupt state in sysrq helper") Cc: stable@vger.kernel.org # 5.13 Cc: Joel Stanley <joel@jms.id.au> Cc: Andrew Jeffery <andrew@aj.id.au> Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210714080427.28164-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12serial: 8250: Mask out floating 16/32-bit bus bitsMaciej W. Rozycki
commit e5227c51090e165db4b48dcaa300605bfced7014 upstream. Make sure only actual 8 bits of the IIR register are used in determining the port type in `autoconfig'. The `serial_in' port accessor returns the `unsigned int' type, meaning that with UPIO_AU, UPIO_MEM16, UPIO_MEM32, and UPIO_MEM32BE access types more than 8 bits of data are returned, of which the high order bits will often come from bus lines that are left floating in the data phase. For example with the MIPS Malta board's CBUS UART, where the registers are aligned on 8-byte boundaries and which uses 32-bit accesses, data as follows is returned: YAMON> dump -32 0xbf000900 0x40 BF000900: 1F000942 1F000942 1F000900 1F000900 ...B...B........ BF000910: 1F000901 1F000901 1F000900 1F000900 ................ BF000920: 1F000900 1F000900 1F000960 1F000960 ...........`...` BF000930: 1F000900 1F000900 1F0009FF 1F0009FF ................ YAMON> Evidently high-order 24 bits return values previously driven in the address phase (the 3 highest order address bits used with the command above are masked out in the simple virtual address mapping used here and come out at zeros on the external bus), a common scenario with bus lines left floating, due to bus capacitance. Consequently when the value of IIR, mapped at 0x1f000910, is retrieved in `autoconfig', it comes out at 0x1f0009c1 and when it is right-shifted by 6 and then assigned to 8-bit `scratch' variable, the value calculated is 0x27, not one of 0, 1, 2, 3 expected in port type determination. Fix the issue then, by assigning the value returned from `serial_in' to `scratch' first, which masks out 24 high-order bits retrieved, and only then right-shift the resulting 8-bit data quantity, producing the value of 3 in this case, as expected. Fix the same issue in `serial_dl_read'. The problem first appeared with Linux 2.6.9-rc3 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git> as commit e0d2356c0777 ("Merge with Linux 2.6.9-rc3."), where code in `serial_in' was updated with this case: + case UPIO_MEM32: + return readl(up->port.membase + offset); + which made it produce results outside the unsigned 8-bit range for the first time, though obviously it is system dependent what actual values appear in the high order bits retrieved and it may well have been zeros in the relevant positions with the system the change originally was intended for. It is at that point that code in `autoconf' should have been updated accordingly, but clearly it was overlooked. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260516220.37803@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-12 04:32:55 +0000