summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-06-20sched: refactor wait_for_completion_timeout()Oleg Nesterov
Simplify the code and fix the boundary condition of wait_for_completion_timeout(,0). We can kill the first __remove_wait_queue() as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2008-06-20sched: fix wait_for_completion_timeout() spurious failure under heavy loadRoland Dreier
It seems that the current implementaton of wait_for_completion_timeout() has a small problem under very high load for the common pattern: if (!wait_for_completion_timeout(&done, timeout)) /* handle failure */ because the implementation very roughly does (lots of code deleted to show the basic flow): static inline long __sched do_wait_for_common(struct completion *x, long timeout, int state) { if (x->done) return timeout; do { timeout = schedule_timeout(timeout); if (!timeout) return timeout; } while (!x->done); return timeout; } so if the system is very busy and x->done is not set when do_wait_for_common() is entered, it is possible that the first call to schedule_timeout() returns 0 because the task doing wait_for_completion doesn't get rescheduled for a long time, even if it is woken up early enough. In this case, wait_for_completion_timeout() returns 0 without even checking x->done again, and the code above falls into its failure case purely for scheduler reasons, even if the hardware event or whatever was being waited for happened early enough. It would make sense to add an extra test to do_wait_for() in the timeout case and return 1 if x->done is actually set. A quick audit (not exhaustive) of wait_for_completion_timeout() callers seems to indicate that no one actually cares about the return value in the success case -- they just test for 0 (timed out) versus non-zero (wait succeeded). Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-20sched: rt: dont stop the period timer when there are tasks wanting to runPeter Zijlstra
So if the group ever gets throttled, it will never wake up again. Reported-by: "Daniel K." <dk@uw.no> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Daniel K. <dk@uw.no> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-19sched, delay accounting: fix incorrect delay time when constantly waiting on ↵Bharath Ravi
runqueue This patch corrects the incorrect value of per process run-queue wait time reported by delay statistics. The anomaly was due to the following reason. When a process leaves the CPU and immediately starts waiting for CPU on the runqueue (which means it remains in the TASK_RUNNABLE state), the time of re-entry into the run-queue is never recorded. Due to this, the waiting time on the runqueue from this point of re-entry upto the next time it hits the CPU is not accounted for. This is solved by recording the time of re-entry of a process leaving the CPU in the sched_info_depart() function IF the process will go back to waiting on the run-queue. This IF condition is verified by checking whether the process is still in the TASK_RUNNABLE state. The patch was tested on 2.6.26-rc6 using two simple CPU hog programs. The values noted prior to the fix did not account for the time spent on the runqueue waiting. After the fix, the correct values were reported back to user space. Signed-off-by: Bharath Ravi <bharathravi1@gmail.com> Signed-off-by: Madhava K R <madhavakr@gmail.com> Cc: dhaval@linux.vnet.ibm.com Cc: vatsa@in.ibm.com Cc: balbir@in.ibm.com Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-19Merge branch 'linus' into sched/urgentIngo Molnar
2008-06-19sched: CPU hotplug events must not destroy scheduler domains created by the ↵Max Krasnyansky
cpusets First issue is not related to the cpusets. We're simply leaking doms_cur. It's allocated in arch_init_sched_domains() which is called for every hotplug event. So we just keep reallocation doms_cur without freeing it. I introduced free_sched_domains() function that cleans things up. Second issue is that sched domains created by the cpusets are completely destroyed by the CPU hotplug events. For all CPU hotplug events scheduler attaches all CPUs to the NULL domain and then puts them all into the single domain thereby destroying domains created by the cpusets (partition_sched_domains). The solution is simple, when cpusets are enabled scheduler should not create default domain and instead let cpusets do that. Which is exactly what the patch does. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Cc: pj@sgi.com Cc: menage@google.com Cc: rostedt@goodmis.org Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-06-19sched: rt-group: fix RR bugletPeter Zijlstra
In tick_task_rt() we first call update_curr_rt() which can dequeue a runqueue due to it running out of runtime, and then we try to requeue it, of it also having exhausted its RR quota. Obviously requeueing something that is no longer on the runqueue will not have the expected result. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Daniel K. <dk@uw.no> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-19sched: rt-group: heirarchy aware throttlePeter Zijlstra
The bandwidth throttle code dequeues a group when it runs out of quota, and re-queues it once the period rolls over and the quota gets refreshed. Sadly it failed to take the hierarchy into consideration. Share more of the enqueue/dequeue code with regular task opterations. Also, some operations like sched_setscheduler() can dequeue/enqueue tasks that are in throttled runqueues, we should not inadvertly re-enqueue empty runqueues so check for that. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Daniel K. <dk@uw.no> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-19sched: rt-group: fix hierarchyPeter Zijlstra
Don't re-set the entity's runqueue to the wrong rq after we've set it to the right one. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Daniel K. <dk@uw.no> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-19sched: NULL pointer dereference while setting sched_rt_period_usDario Faggioli
When CONFIG_RT_GROUP_SCHED and CONFIG_CGROUP_SCHED are enabled, with: echo 10000 > /proc/sys/kernel/sched_rt_period_us We get this: BUG: unable to handle kernel NULL pointer dereference at 0000008c [ 947.682233] IP: [<c0216b72>] __rt_schedulable+0x12/0x160 [ 947.683123] *pde = 00000000=20 [ 947.683782] Oops: 0000 [#1] [ 947.684307] Modules linked in: [ 947.684308] [ 947.684308] Pid: 2359, comm: bash Not tainted (2.6.26-rc6 #8) [ 947.684308] EIP: 0060:[<c0216b72>] EFLAGS: 00000246 CPU: 0 [ 947.684308] EIP is at __rt_schedulable+0x12/0x160 [ 947.684308] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001 [ 947.684308] ESI: c0521db4 EDI: 00000001 EBP: c6cc9f00 ESP: c6cc9ed0 [ 947.684308] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 947.684308] Process bash (pid: 2359, tiÆcc8000 taskÇa54f00=20 task.tiÆcc8000) [ 947.684308] Stack: c0222790 00000000 080f8c08 c0521db4 c6cc9f00 00000001 00000000 00000000 [ 947.684308] c6cc9f9c 00000000 c0521db4 00000001 c6cc9f28 c0216d40 00000000 00000000 [ 947.684308] c6cc9f9c 000f4240 000e7ef0 ffffffff c0521db4 c79dfb60 c6cc9f58 c02af2cc [ 947.684308] Call Trace: [ 947.684308] [<c0222790>] ? do_proc_dointvec_conv+0x0/0x50 [ 947.684308] [<c0216d40>] ? sched_rt_handler+0x80/0x110 [ 947.684308] [<c02af2cc>] ? proc_sys_call_handler+0x9c/0xb0 [ 947.684308] [<c02af2fa>] ? proc_sys_write+0x1a/0x20 [ 947.684308] [<c0273c36>] ? vfs_write+0x96/0x160 [ 947.684308] [<c02af2e0>] ? proc_sys_write+0x0/0x20 [ 947.684308] [<c027423d>] ? sys_write+0x3d/0x70 [ 947.684308] [<c0202ef5>] ? sysenter_past_esp+0x6a/0x91 [ 947.684308] ======================= [ 947.684308] Code: 24 04 e8 62 b1 0e 00 89 c7 89 f8 8b 5d f4 8b 75 f8 8b 7d fc 89 ec 5d c3 90 55 89 e5 57 56 53 83 ec 24 89 45 ec 89 55 e4 89 4d e8 <8b> b8 8c 00 00 00 85 ff 0f 84 c9 00 00 00 8b 57 24 39 55 e8 8b [ 947.684308] EIP: [<c0216b72>] __rt_schedulable+0x12/0x160 SS:ESP 0068:c6cc9ed0 We think the following patch solves the issue. Signed-off-by: Dario Faggioli <raistlin@linux.it> Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-18agp: brown paper bag patch - put back two lines that got losttip-x86-urgent-2008-06-19_09.38_Thutip-x86-fixmap-2008-06-23_09.02_Montip-sched-urgent-2008-06-19_09.38_Thutip-sched-new-API-sched_setscheduler-2008-06-23_09.00_Montip-core-urgent-2008-06-19_09.38_ThuDave Airlie
Commit 62c96b9d0917894c164aa3e474a3ff3bca1554ae ("agp/intel: cleanup some serious whitespace badness") didn't just fix whitespace. It also lost two lines. Noticed by Linus. No more whitespace diffs for me. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-18Merge branch 'agp-patches' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6 * 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6: agp/intel: cleanup some serious whitespace badness [AGP] intel_agp: Add support for Intel 4 series chipsets [AGP] intel_agp: extra stolen mem size available for IGD_GM chipset agp: more boolean conversions. drivers/char/agp - use bool agp: two-stage page destruction issue agp/via: fixup pci ids
2008-06-19agp/intel: cleanup some serious whitespace badnessDave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19[AGP] intel_agp: Add support for Intel 4 series chipsetsZhenyu Wang
Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19[AGP] intel_agp: extra stolen mem size available for IGD_GM chipsetZhenyu Wang
This adds missing stolen memory size detect for IGD_GM, be sure to detect right size as current X intel driver (2.3.2) which has already worked out. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19agp: more boolean conversions.Dave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19drivers/char/agp - use boolJoe Perches
Use boolean in AGP instead of having own TRUE/FALSE -- Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19agp: two-stage page destruction issueJan Beulich
besides it apparently being useful only in 2.6.24 (the changes in 2.6.25 really mean that it could be converted back to a single-stage mechanism), I'm seeing an issue in Xen Dom0 kernels, which is caused by the calling of gart_to_virt() in the second stage invocations of the destroy function. I think that besides this being a real issue with Xen (where unmap_page_from_agp() is not just a page table attribute change), this also is invalid from a theoretical perspective: One should not assume that gart_to_virt() is still valid after unmapping a page. So minimally (keeping the 2-stage mechanism) a patch like the one below would be needed. Jan Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19agp/via: fixup pci idsGreg KH
add a new PCI ID and remove an old dodgy one, include the explaination in the commented code so nobody readds later. (davej also sent the pci id addition). Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/uverbs: Fix check of is_closed flag check in ib_uverbs_async_handler() RDMA/nes: Fix off-by-one in nes_reg_user_mr() error path
2008-06-18IB/uverbs: Fix check of is_closed flag check in ib_uverbs_async_handler()Jack Morgenstein
Commit 1ae5c187 ("IB/uverbs: Don't store struct file * for event files") changed the way that closed files are handled in the uverbs code. However, after the conversion, is_closed flag is checked incorrectly in ib_uverbs_async_handler(). As a result, no async events are ever passed to applications. Found by: Ronni Zimmerman <ronniz@mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: Revert "[WATCHDOG] hpwdt: Fix NMI handling." [WATCHDOG] hpwdt: Add CFLAGS to get driver working Revert "[WATCHDOG] make watchdog/hpwdt.c:asminline_call() static"
2008-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] dpt_i2o: Add PROC_IA64 define [SCSI] scsi_host regression: fix scsi host leak [SCSI] sr: fix corrupt CD data after media change and delay
2008-06-18Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Clear sub-page HPTE present bits when demoting page size [POWERPC] 4xx: Clear new TLB cache attribute bits in Data Storage vector
2008-06-18Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: udf: restore UDFFS_DEBUG to being undefined by default
2008-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (43 commits) netlink: genl: fix circular locking Revert "mac80211: Use skb_header_cloned() on TX path." af_unix: fix 'poll for write'/ connected DGRAM sockets tun: Proper handling of IPv6 header in tun driver when TUN_NO_PI is set atl1: relax eeprom mac address error check net/enc28j60: low power mode net/enc28j60: section fix sky2: 88E8040T pci device id netxen: download firmware in pci probe netxen: cleanup debug messages netxen: remove global physical_port array netxen: fix portnum for hp mezz cards ibm_newemac: select CRC32 in Kconfig xfrm: fix fragmentation for ipv4 xfrm tunnel netfilter: nf_conntrack_h323: fix module unload crash netfilter: nf_conntrack_h323: fix memory leak in module initialization error path netfilter: nf_nat: fix RCU races atm: [he] send idle cells instead of unassigned when in SDH mode atm: [he] limit queries to the device's register space atm: [br2864] fix routed vcmux support ...
2008-06-18Revert "[WATCHDOG] hpwdt: Fix NMI handling."Wim Van Sebroeck
The old setup works better. Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-06-18[POWERPC] Clear sub-page HPTE present bits when demoting page sizePaul Mackerras
When we demote a slice from 64k to 4k, and we are about to insert an HPTE for a 4k subpage and we notice that there is an existing 64k HPTE, we first invalidate that HPTE before inserting the new 4k subpage HPTE. Since the bits that encode which hash bucket the old HPTE was in overlap with the bits that encode which of the 16 subpages have HPTEs, we need to clear out the subpage HPTE-present bits before starting to insert HPTEs for the 4k subpages. If we don't do that, we can erroneously think that a subpage already has an HPTE when it doesn't. That in itself wouldn't be such a problem except that when we go to update the HPTE that we think is present on machines with a hypervisor, the hypervisor can tell us that the HPTE we think is there is actually there even though it isn't, which can lead to a process getting stuck in a loop, continually faulting. The reason for the confusion is that the AVPN (abbreviated virtual page number) we are looking for in the HPTE for a 4k subpage can actually match the AVPN in a stale HPTE for another 64k page. For example, the HPTE for the 4k subpage at 0x84000f000 will be in the same hash bucket and have the same AVPN as the HPTE for the 64k page at 0x8400f0000. This fixes the code to clear out the subpage HPTE-present bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-18[POWERPC] 4xx: Clear new TLB cache attribute bits in Data Storage vectorJosh Boyer
A recent commit added support for the new 440x6 and 464 cores that have the added WL1, IL1I, IL1D, IL2I, and ILD2 bits for the caching attributes in the TLBs. The new bits were cleared in the finish_tlb_load function, however a similar bit of code was missed in the DataStorage interrupt vector. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-18netlink: genl: fix circular lockingPatrick McHardy
genetlink has a circular locking dependency when dumping the registered families: - dump start: genl_rcv() : take genl_mutex genl_rcv_msg() : call netlink_dump_start() while holding genl_mutex netlink_dump_start(), netlink_dump() : take nlk->cb_mutex ctrl_dumpfamily() : try to detect this case and not take genl_mutex a second time - dump continuance: netlink_rcv() : call netlink_dump netlink_dump : take nlk->cb_mutex ctrl_dumpfamily() : take genl_mutex Register genl_lock as callback mutex with netlink to fix this. This slightly widens an already existing module unload race, the genl ops used during the dump might go away when the module is unloaded. Thomas Graf is working on a seperate fix for this. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-18Revert "mac80211: Use skb_header_cloned() on TX path."David S. Miller
This reverts commit 608961a5eca8d3c6bd07172febc27b5559408c5d. The problem is that the mac80211 stack not only needs to be able to muck with the link-level headers, it also might need to mangle all of the packet data if doing sw wireless encryption. This fixes kernel bugzilla #10903. Thanks to Didier Raboud (for the bugzilla report), Andrew Prince (for bisecting), Johannes Berg (for bringing this bisection analysis to my attention), and Ilpo (for trying to analyze this purely from the TCP side). In 2.6.27 we can take another stab at this, by using something like skb_cow_data() when the TX path of mac80211 ends up with a non-NULL tx->key. The ESP protocol code in the IPSEC stack can be used as a model for implementation. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17af_unix: fix 'poll for write'/ connected DGRAM socketsRainer Weikusat
The unix_dgram_sendmsg routine implements a (somewhat crude) form of receiver-imposed flow control by comparing the length of the receive queue of the 'peer socket' with the max_ack_backlog value stored in the corresponding sock structure, either blocking the thread which caused the send-routine to be called or returning EAGAIN. This routine is used by both SOCK_DGRAM and SOCK_SEQPACKET sockets. The poll-implementation for these socket types is datagram_poll from core/datagram.c. A socket is deemed to be writeable by this routine when the memory presently consumed by datagrams owned by it is less than the configured socket send buffer size. This is always wrong for connected PF_UNIX non-stream sockets when the abovementioned receive queue is currently considered to be full. 'poll' will then return, indicating that the socket is writeable, but a subsequent write result in EAGAIN, effectively causing an (usual) application to 'poll for writeability by repeated send request with O_NONBLOCK set' until it has consumed its time quantum. The change below uses a suitably modified variant of the datagram_poll routines for both type of PF_UNIX sockets, which tests if the recv-queue of the peer a socket is connected to is presently considered to be 'full' as part of the 'is this socket writeable'-checking code. The socket being polled is additionally put onto the peer_wait wait queue associated with its peer, because the unix_dgram_sendmsg routine does a wake up on this queue after a datagram was received and the 'other wakeup call' is done implicitly as part of skb destruction, meaning, a process blocked in poll because of a full peer receive queue could otherwise sleep forever if no datagram owned by its socket was already sitting on this queue. Among this change is a small (inline) helper routine named 'unix_recvq_full', which consolidates the actual testing code (in three different places) into a single location. Signed-off-by: Rainer Weikusat <rweikusat@mssgmbh.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17Merge branch 'davem-fixes' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-06-17tun: Proper handling of IPv6 header in tun driver when TUN_NO_PI is setAng Way Chuang
By default, tun.c running in TUN_TUN_DEV mode will set the protocol of packet to IPv4 if TUN_NO_PI is set. My program failed to work when I assumed that the driver will check the first nibble of packet, determine IP version and set the appropriate protocol. Signed-off-by: Ang Way Chuang <wcang@nav6.org> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17atl1: relax eeprom mac address error checkRadu Cristescu
The atl1 driver tries to determine the MAC address thusly: - If an EEPROM exists, read the MAC address from EEPROM and validate it. - If an EEPROM doesn't exist, try to read a MAC address from SPI flash. - If that fails, try to read a MAC address directly from the MAC Station Address register. - If that fails, assign a random MAC address provided by the kernel. We now have a report of a system fitted with an EEPROM containing all zeros where we expect the MAC address to be, and we currently handle this as an error condition. Turns out, on this system the BIOS writes a valid MAC address to the NIC's MAC Station Address register, but we never try to read it because we return an error when we find the all- zeros address in EEPROM. This patch relaxes the error check and continues looking for a MAC address even if it finds an illegal one in EEPROM. Signed-off-by: Radu Cristescu <advantis@gmx.net> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17net/enc28j60: low power modeDavid Brownell
Keep enc28j60 chips in low-power mode when they're not in use. At typically 120 mA, these chips run hot even when idle; this low power mode cuts that power usage by a factor of around 100. This version provides a generic routine to poll a register until its masked value equals some value ... e.g. bit set or cleared. It's basically what the previous wait_phy_ready() did, but this version is generalized to support the handshaking needed to enter and exit low power mode. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17net/enc28j60: section fixDavid Brownell
Minor bugfixes to the enc28j60 driver ... wrong section marking, indentation, and bogus use of spi_bus_type. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17sky2: 88E8040T pci device idStephen Hemminger
Missed one pci id for 88E8040T. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: download firmware in pci probeDhananjay Phadke
Downloading firmware in pci probe allows recovery in case of firmware failure by reloading the driver. Also reduced delays in firmware load. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: cleanup debug messagesDhananjay Phadke
o Remove unnecessary debug prints and functions. o Explicitly specify pci class (0x020000) to avoid enabling management function. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: remove global physical_port arrayDhananjay Phadke
Store physical port number in netxen_adapter structure. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: fix portnum for hp mezz cardsDhananjay Phadke
This fixes a the issue where logical port number is set incorrectly for HP blade mezz cards. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17ibm_newemac: select CRC32 in KconfigJosh Boyer
The ibm_newemac driver requires ether_crc to be defined. Apparently it is possible to generate a .config without CONFIG_CRC32 set which causes the following link errors if IBM_NEW_EMAC is selected: LD .tmp_vmlinux1 drivers/built-in.o: In function `emac_hash_mc': core.c:(.text+0x2f524): undefined reference to `crc32_le' core.c:(.text+0x2f528): undefined reference to `bitrev32' make: *** [.tmp_vmlinux1] Error 1 This patch has IBM_NEW_EMAC select CRC32 so we don't hit this error. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17Merge branch 'for-linus' of ↵tip-x86-pci-ioapic-boot-irq-quirks-2008-06-23_09.52_Montip-x86-mm-remove-arch-get-ram-range-2008-06-23_09.06_Montip-x86-mm-debug-2008-06-23_09.04_Montip-core-debugobjects-2008-06-23_08.51_MonLinus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: appletouch - implement reset-resume logic Input: i8042 - retry failed CTR writes when resuming Input: i8042 - add Fujitsu-Siemens Amilo Pro V2030 to nomux table Input: pcspkr - remove negative dependency on snd-pcsp Manually fixed up trivial conflict in drivers/usb/core/quirks.c
2008-06-17fuse: fix thinko in max I/O size calucationMiklos Szeredi
Use max not min to enforce a lower limit on the max I/O size. This bug was introduced by "fuse: fix max i/o size calculation" (commit e5d9a0df07484d6d191756878c974e4307fb24ce). Thanks to Brian Wang for noticing. Reported-by: Brian Wang <ywang221@hotmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Szabolcs Szakacsits <szaka@ntfs-3g.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-17Unignore vmlinux.lds.h from Git.Eduard - Gabriel Munteanu
Added !vmlinux.lds.h to .gitignore because it would otherwise be ignored. Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-17x86-64: Fix "bytes left to copy" return value for copy_from_user()Linus Torvalds
Most users by far do not care about the exact return value (they only really care about whether the copy succeeded in its entirety or not), but a few special core routines actually care deeply about exactly how many bytes were copied from user space. And the unrolled versions of the x86-64 user copy routines would sometimes report that it had copied more bytes than it actually had. Very few uses actually have partial copies to begin with, but to make this bug even harder to trigger, most x86 CPU's use the "rep string" instructions for normal user copies, and that version didn't have this issue. To make it even harder to hit, the one user of this that really cared about the return value (and used the uncached version of the copy that doesn't use the "rep string" instructions) was the generic write routine, which pre-populated its source, once more hiding the problem by avoiding the exception case that triggers the bug. In other words, very special thanks to Bron Gondwana who not only triggered this, but created a test-program to show it, and bisected the behavior down to commit 08291429cfa6258c4cd95d8833beb40f828b194e ("mm: fix pagecache write deadlocks") which changed the access pattern just enough that you can now trigger it with 'writev()' with multiple iovec's. That commit itself was not the cause of the bug, it just allowed all the stars to align just right that you could trigger the problem. [ Side note: this is just the minimal fix to make the copy routines (with __copy_from_user_inatomic_nocache as the particular version that was involved in showing this) have the right return values. We really should improve on the exceptional case further - to make the copy do a byte-accurate copy up to the exact page limit that causes it to fail. As it is, the callers have to do extra work to handle the limit case gracefully. ] Reported-by: Bron Gondwana <brong@fastmail.fm> Cc: Nick Piggin <npiggin@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> (which didn't have this problem), and since most users that do the carethis was very hard to trigger, but
2008-06-17xfrm: fix fragmentation for ipv4 xfrm tunnelSteffen Klassert
When generating the ip header for the transformed packet we just copy the frag_off field of the ip header from the original packet to the ip header of the new generated packet. If we receive a packet as a chain of fragments, all but the last of the new generated packets have the IP_MF flag set. We have to mask the frag_off field to only keep the IP_DF flag from the original packet. This got lost with git commit 36cf9acf93e8561d9faec24849e57688a81eb9c5 ("[IPSEC]: Separate inner/outer mode processing on output") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17netfilter: nf_conntrack_h323: fix module unload crashPatrick McHardy
The H.245 helper is not registered/unregistered, but assigned to connections manually from the Q.931 helper. This means on unload existing expectations and connections using the helper are not cleaned up, leading to the following oops on module unload: CPU 0 Unable to handle kernel paging request at virtual address c00a6828, epc == 802224dc, ra == 801d4e7c Oops[#1]: Cpu 0 $ 0 : 00000000 00000000 00000004 c00a67f0 $ 4 : 802a5ad0 81657e00 00000000 00000000 $ 8 : 00000008 801461c8 00000000 80570050 $12 : 819b0280 819b04b0 00000006 00000000 $16 : 802a5a60 80000000 80b46000 80321010 $20 : 00000000 00000004 802a5ad0 00000001 $24 : 00000000 802257a8 $28 : 802a4000 802a59e8 00000004 801d4e7c Hi : 0000000b Lo : 00506320 epc : 802224dc ip_conntrack_help+0x38/0x74 Tainted: P ra : 801d4e7c nf_iterate+0xbc/0x130 Status: 1000f403 KERNEL EXL IE Cause : 00800008 BadVA : c00a6828 PrId : 00019374 Modules linked in: ip_nat_pptp ip_conntrack_pptp ath_pktlog wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_xauth ath_pci ath_dev ath_dfs ath_rate_atheros wlan ath_hal ip_nat_tftp ip_conntrack_tftp ip_nat_ftp ip_conntrack_ftp pppoe ppp_async ppp_deflate ppp_mppe pppox ppp_generic slhc Process swapper (pid: 0, threadinfo=802a4000, task=802a6000) Stack : 801e7d98 00000004 802a5a60 80000000 801d4e7c 801d4e7c 802a5ad0 00000004 00000000 00000000 801e7d98 00000000 00000004 802a5ad0 00000000 00000010 801e7d98 80b46000 802a5a60 80320000 80000000 801d4f8c 802a5b00 00000002 80063834 00000000 80b46000 802a5a60 801e7d98 80000000 802ba854 00000000 81a02180 80b7e260 81a021b0 819b0000 819b0000 80570056 00000000 00000001 ... Call Trace: [<801e7d98>] ip_finish_output+0x0/0x23c [<801d4e7c>] nf_iterate+0xbc/0x130 [<801d4e7c>] nf_iterate+0xbc/0x130 [<801e7d98>] ip_finish_output+0x0/0x23c [<801e7d98>] ip_finish_output+0x0/0x23c [<801d4f8c>] nf_hook_slow+0x9c/0x1a4 One way to fix this would be to split helper cleanup from the unregistration function and invoke it for the H.245 helper, but since ctnetlink needs to be able to find the helper for synchonization purposes, a better fix is to register it normally and make sure its not assigned to connections during helper lookup. The missing l3num initialization is enough for this, this patch changes it to use AF_UNSPEC to make it more explicit though. Reported-by: liannan <liannan@twsz.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17netfilter: nf_conntrack_h323: fix memory leak in module initialization error ↵Patrick McHardy
path Properly free h323_buffer when helper registration fails. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>