Age | Commit message (Collapse) | Author |
|
Reconstruct the refcount data from the rmap btree.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Use the rmapbt to find inode chunks, query the chunks to compute
hole and free masks, and with that information rebuild the inobt
and finobt.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Rebuild the free space btrees from the gaps in the rmap btree.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
After an online repair function runs for a per-AG metadata structure,
sc->sick_mask is supposed to reflect the per-AG metadata that the repair
function fixed. Our next move is to re-check the metadata to assess
the completeness of our repair, so we don't want the rebuilt structure
to be excluded from the rescan just because the health system previously
logged a problem with the data structure.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Finish the realtime summary scrubber by adding the functions we need to
compute a fresh copy of the rtsummary info and comparing it to the copy
on disk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Move the realtime summary file checking code to a separate file in
preparation to actually implement it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
When we want to scrub a file, get our own reference to the inode
unconditionally. This will make disposal rules simpler in the long run.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Create a simple 'big array' data structure for storage of fixed-size
metadata records that will be used to reconstruct a btree index. For
repair operations, the most important operations are append, iterate,
and sort.
Earlier implementations of the big array used linked lists and suffered
from severe problems -- pinning all records in kernel memory was not a
good idea and frequently lead to OOM situations; random access was very
inefficient; and record overhead for the lists was unacceptably high at
40-60%.
Therefore, the big memory array relies on the 'xfile' abstraction, which
creates a memfd file and stores the records in page cache pages. Since
the memfd is created in tmpfs, the memory pages can be pushed out to
disk if necessary and we have a built-in usage limit of 50% of physical
memory.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
We need to log EFIs for every extent that we allocate for the purpose of
staging a new btree so that if we fail then the blocks will be freed
during log recovery. Add a function to relog the EFIs, so that repair
can relog them all every time it creates a new btree block, which will
help us to avoid pinning the log tail.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Add some debug knobs so that we can control the leaf and node block
slack when rebuilding btrees.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Create a new xrep_newbt structure to encapsulate a fake root for
creating a staged btree cursor as well as to track all the blocks that
we need to reserve in order to build that btree.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Convert the xbitmap code to use interval trees instead of linked lists.
This reduces the amount of coding required to handle the disunion
operation and in the future will make it easier to set bits in arbitrary
order yet later be able to extract maximally sized extents, which we'll
need for rebuilding certain structures. We define our own interval tree
type so that it can deal with 64-bit indices even on 32-bit machines.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
When we're freeing extents that have been set in a bitmap, break the
bitmap extent into multiple sub-extents organized by fate, and reap the
extents. This enables us to dispose of old resources more efficiently
than doing them block by block.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
It's not safe to edit bitmap intervals while we're iterating them with
for_each_xbitmap_extent. None of the existing callers actually need
that ability anyway, so drop the safe variable.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Remove the for_each_xbitmap_ macros in favor of proper iterator
functions. We'll soon be switching this data structure over to an
interval tree implementation, which means that we can't allow callers to
modify the bitmap during iteration without telling us.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Use deferred frees (EFIs) to reap the blocks of a btree that we just
replaced. This helps us to shrink the window in which those old blocks
could be lost due to a system crash, though we try to flush the EFIs
every few hundred blocks so that we don't also overflow the transaction
reservations during and after we commit the new btree.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Now that we've refactored btree cursors to require the caller to pass in
a perag structure, there are numerous problems in xrep_reap_extents if
it's being called to reap extents for an inode metadata repair. We
don't have any repair functions that can do that, so drop the support
for now.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
When we're discarding old btree blocks after a repair, only invalidate
the buffers for the ones that we're freeing -- if the metadata was
crosslinked with another data structure, we don't want to touch it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Currently, the code that performs CoW remapping after a write has this
odd behavior where it walks /backwards/ through the data fork to remap
extents in reverse order. Earlier, we rewrote the reflink remap
function to use deferred bmap log items instead of trying to cram as
much into the first transaction that we could. Now do the same for the
CoW remap code. There doesn't seem to be any performance impact; we're
just making better use of code that we added for the benefit of reflink.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Before to the introduction of deferred refcount operations, reflink
would try to cram refcount btree updates into the same transaction as an
allocation or a free event. Mainline XFS has never actually done that,
but we never refactored the transaction reservations to reflect that we
now do all refcount updates in separate transactions. Fix this to
reduce the transaction reservation size even farther, so that between
this patch and the previous one, we reduce the tr_write and tr_itruncate
sizes by 66%.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Back in the early days of reflink and rmap development I set the
transaction reservation sizes to be overly generous for rmap+reflink
filesystems, and a little under-generous for rmap-only filesystems.
Since we don't need *eight* transaction rolls to handle three new log
intent items, decrease the logcounts to what we actually need, and amend
the shadow reservation computation function to reflect what we used to
do so that the minimum log size doesn't change.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Every time someone changes the transaction reservation sizes, they
introduce potential compatibility problems if the changes affect the
minimum log size that we validate at mount time. If the minimum log
size gets larger (which should be avoided because doing so presents a
serious risk of log livelock), filesystems created with old mkfs will
not mount on a newer kernel; if the minimum size shrinks, filesystems
created with newer mkfs will not mount on older kernels.
Therefore, enable the creation of a shadow log reservation structure
where we can "undo" the effects of tweaks when computing minimum log
sizes. These shadow reservations should never be used in practice, but
they insulate us from perturbations in minimum log size.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
This raw call isn't necessary since we can always remove a full delalloc
extent.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
In commit e1a4e37cc7b6, we clamped the length of bunmapi calls on the
data forks of shared files to avoid two failure scenarios: one where the
extent being unmapped is so sparsely shared that we exceed the
transaction reservation with the sheer number of refcount btree updates
and EFI intent items; and the other where we attach so many deferred
updates to the transaction that we pin the log tail and later the log
head meets the tail, causing the log to livelock.
We avoid triggering the first problem by tracking the number of ops in
the refcount btree cursor and forcing a requeue of the refcount intent
item any time we think that we might be close to overflowing. This has
been baked into XFS since before the original e1a4 patch.
A recent patchset fixed the second problem by changing the deferred ops
code to finish all the work items created by each round of trying to
complete a refcount intent item, which eliminates the long chains of
deferred items (27dad); and causing long-running transactions to relog
their intent log items when space in the log gets low (74f4d).
Because this clamp affects /any/ unmapping request regardless of the
sharing factors of the component blocks, it degrades the performance of
all large unmapping requests -- whereas with an unshared file we can
unmap millions of blocks in one go, shared files are limited to
unmapping a few thousand blocks at a time, which causes the upper level
code to spin in a bunmapi loop even if it wasn't needed.
This also eliminates one more place where log recovery behavior can
differ from online behavior, because bunmapi operations no longer need
to requeue.
Partial-revert-of: e1a4e37cc7b6 ("xfs: try to avoid blowing out the transaction reservation when bunmaping a shared extent")
Depends: 27dada070d59 ("xfs: change the order in which child and parent defer ops ar finished")
Depends: 74f4d6a1e065 ("xfs: only relog deferred intent items if free space in the log gets low")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Reverse mapping on a reflink-capable filesystem has some pretty high
overhead when performing file operations. This is because the rmap
records for logically and physically adjacent extents might not be
adjacent in the rmap index due to data block sharing. As a result, we
use expensive overlapped-interval btree search, which walks every record
that overlaps with the supplied key in the hopes of finding the record.
However, profiling data shows that when the index contains a record that
is an exact match for a query key, the non-overlapped btree search
function can find the record much faster than the overlapped version.
Try the non-overlapped lookup first when we're trying to find the left
neighbor rmap record for a given file mapping, which makes unwritten
extent conversion and remap operations run faster if data block sharing
is minimal in this part of the filesystem.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Reverse mapping on a reflink-capable filesystem has some pretty high
overhead when performing file operations. This is because the rmap
records for logically and physically adjacent extents might not be
adjacent in the rmap index due to data block sharing. As a result, we
use expensive overlapped-interval btree search, which walks every record
that overlaps with the supplied key in the hopes of finding the record.
However, profiling data shows that when the index contains a record that
is an exact match for a query key, the non-overlapped btree search
function can find the record much faster than the overlapped version.
Try the non-overlapped lookup first, which will make scrub run much
faster.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Most callers of xfs_rmap_lookup_le will retrieve the btree record
immediately if the lookup succeeds. The overlapped version of this
function (xfs_rmap_lookup_le_range) will return the record if the lookup
succeeds, so make the regular version do it too. Get rid of the useless
len argument, since it's not part of the lookup key.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Gaps in the reference count btree are also significant -- for these
regions, there must not be any overlapping reverse mappings. We don't
currently check this, so make the refcount scrubber more complete.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Teach scrub to flag quota files containing unwritten extents.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
When scrub is checking file fork mappings against rmap records and
the rmap record starts before or ends after the bmap record, check the
adjacent bmap records to make sure that they're adjacent to the one
we're checking. This helps us to detect cases where the rmaps cover
territory that the bmaps do not.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Teach the summary count checker to count the number of free realtime
extents and compare that to the superblock copy.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
When scrub is checking a non-root btree block, it should make sure that
the keys in the parent btree block accurately capture the keyspace that
the child block stores.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
The current implementation of xfs_btree_has_record returns true if it
finds /any/ record within the given range. Unfortunately, that's not
what the predicate is supposed to do -- it's supposed to test if the
/entire/ range is covered by records.
Therefore, enhance the routine to check that the first record it
encounters starts earlier or at the same point as the low key, the last
record ends at or after the same point as the high key, and that there
aren't any gaps in the records.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Keys for extent interval records in the reverse mapping btree are
supposed to be computed as follows:
(physical block, owner, fork, is_btree, offset)
This provides users the ability to look up a reverse mapping from a file
block mapping record -- start with the physical block; then if there are
multiple records for the same block, move on to the owner; then the
inode fork type; and so on to the file offset.
However, the key comparison functions incorrectly remove the fork/bmbt
information that's encoded in the on-disk offset. This means that
lookup comparisons are only done with:
(physical block, owner, offset)
This means that queries can return incorrect results. On consistent
filesystems this isn't an issue because bmbt blocks and blocks mapped to
an attr fork cannot be shared, but this prevents us from detecting
incorrect fork and bmbt flag bits in the rmap btree.
A previous version of this patch forgot to keep the (un)written state
flag masked during the comparison and caused a major regression in
5.9.x since unwritten extent conversion can update an rmap record
without requiring key updates.
Note that blocks cannot go directly from data fork to attr fork without
being deallocated and reallocated, nor can they be added to or removed
from a bmbt without a free/alloc cycle, so this should not cause any
regressions.
Found by fuzzing keys[1].attrfork = ones on xfs/371.
Fixes: 4b8ed67794fe ("xfs: add rmap btree operations")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Add missing fields and remove some duplicate fields when printing a
perf_event_attr.
- Fix hybrid config terms list corruption.
- Update kernel header copies, some resulted in new kernel features
being automagically added to 'perf trace' syscall/tracepoint argument
id->string translators.
- Add a file generated during the documentation build to .gitignore.
- Add an option to build without libbfd, as some distros, like Debian
consider its ABI unstable.
- Add support to print a textual representation of IBS raw sample data
in 'perf report'.
- Fix bpf 'perf test' sample mismatch reporting
- Fix passing arguments to stackcollapse report in a 'perf script'
python script.
- Allow build-id with trailing zeros.
- Look for ImageBase in PE file to compute .text offset.
* tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits)
tools headers UAPI: Update tools's copy of drm.h headers
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/fs.h with the kernel sources
tools headers UAPI: Sync linux/in.h copy with the kernel sources
perf tools: Add an option to build without libbfd
perf tools: Allow build-id with trailing zeros
perf tools: Fix hybrid config terms list corruption
perf tools: Factor out copy_config_terms() and free_config_terms()
perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
perf tools: Ignore Documentation dependency file
perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
tools include UAPI: Update linux/mount.h copy
perf beauty: Cover more flags in the move_mount syscall argument beautifier
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
perf report: Add support to print a textual representation of IBS raw sample data
perf report: Add tools/arch/x86/include/asm/amd-ibs.h
perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings
...
|
|
git://github.com/ojeda/linux
Pull compiler attributes updates from Miguel Ojeda:
- Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver)
- Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers)
- Move __compiletime_{error|warning} (Nick Desaulniers)
* tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux:
compiler_attributes.h: move __compiletime_{error|warning}
MAINTAINERS: add Nick as Reviewer for compiler_attributes.h
Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4
|
|
Pull auxdisplay updates from Miguel Ojeda:
"An assortment of improvements for auxdisplay:
- Replace symbolic permissions with octal permissions (Jinchao Wang)
- ks0108: Switch to use module_parport_driver() (Andy Shevchenko)
- charlcd: Drop unneeded initializers and switch to C99 style (Andy
Shevchenko)
- hd44780: Fix oops on module unloading (Lars Poeschel)
- Add I2C gpio expander example (Ralf Schlatterbeck)"
* tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux:
auxdisplay: Replace symbolic permissions with octal permissions
auxdisplay: ks0108: Switch to use module_parport_driver()
auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style
auxdisplay: hd44780: Fix oops on module unloading
auxdisplay: Add I2C gpio expander example
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
"Updates for the SMP and CPU hotplug:
- Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the
original hotplug code and now causing trouble with the ARM64 cache
topology setup due to the pointless SMP function call.
It's not longer required as the hotplug callbacks are guaranteed to
be invoked on the upcoming CPU.
- Remove the deprecated and now unused CPU hotplug functions
- Rewrite the CPU hotplug API documentation"
* tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: core-api/cpuhotplug: Rewrite the API section
cpu/hotplug: Remove deprecated CPU-hotplug functions.
thermal: Replace deprecated CPU-hotplug functions.
drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver fix from Greg KH:
"Here is a single patch for 5.15-rc1, for the lkdtm misc driver.
It resolves a build issue that many people were hitting with your
current tree, and Kees and others felt would be good to get merged
before -rc1 comes out, to prevent them from having to constantly hit
it as many development trees restart on -rc1, not older -rc releases.
It has NOT been in linux-next, but has passed 0-day testing and looks
'obviously correct' when reviewing it locally :)"
* tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
lkdtm: Use init_uts_ns.name instead of macros
|
|
Pull IPMI updates from Corey Minyard:
"A couple of very minor fixes for style and rate limiting.
Nothing big, but probably needs to go in"
* tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi:
char: ipmi: use DEVICE_ATTR helper macro
ipmi: rate limit ipmi smi_event failure message
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Make sure the idle timer expires in hardirq context, on PREEMPT_RT
- Make sure the run-queue balance callback is invoked only on the
outgoing CPU
* tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Prevent balance_push() on remote runqueues
sched/idle: Make the idle timer expire in hard interrupt context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Fix the futex PI requeue machinery to not return to userspace in
inconsistent state
- Avoid a potential null pointer dereference in the ww_mutex deadlock
check
- Other smaller cleanups and optimizations
* tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Fix ww_mutex deadlock check
futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic()
futex: Avoid redundant task lookup
futex: Clarify comment for requeue_pi_wake_futex()
futex: Prevent inconsistent state and exit race
futex: Return error code instead of assigning it without effect
locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Handle negative second values properly when converting a timespec64
to nanoseconds.
* tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Handle negative seconds correctly in timespec64_to_ns()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull namei updates from Al Viro:
"Clearing fallout from mkdirat in io_uring series. The fix in the
kern_path_locked() patch plus associated cleanups"
* 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
putname(): IS_ERR_OR_NULL() is wrong here
namei: Standardize callers of filename_create()
namei: Standardize callers of filename_lookup()
rename __filename_parentat() to filename_parentat()
namei: Fix use after free in kern_path_locked
|
|
Pull smbfs updates from Steve French:
"cifs/smb3 updates:
- DFS reconnect fix
- begin creating common headers for server and client
- rename the cifs_common directory to smbfs_common to be more
consistent ie change use of the name cifs to smb (smb3 or smbfs is
more accurate, as the very old cifs dialect has long been
superseded by smb3 dialects).
In the future we can rename the fs/cifs directory to fs/smbfs.
This does not include the set of multichannel fixes nor the two
deferred close fixes (they are still being reviewed and tested)"
* tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: properly invalidate cached root handle when closing it
cifs: move SMB FSCTL definitions to common code
cifs: rename cifs_common to smbfs_common
cifs: update FSCTL definitions
|
|
Pull virtio updates from Michael Tsirkin:
- vduse driver ("vDPA Device in Userspace") supporting emulated virtio
block devices
- virtio-vsock support for end of record with SEQPACKET
- vdpa: mac and mq support for ifcvf and mlx5
- vdpa: management netlink for ifcvf
- virtio-i2c, gpio dt bindings
- misc fixes and cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
Documentation: Add documentation for VDUSE
vduse: Introduce VDUSE - vDPA Device in Userspace
vduse: Implement an MMU-based software IOTLB
vdpa: Support transferring virtual addressing during DMA mapping
vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
vhost-iotlb: Add an opaque pointer for vhost IOTLB
vhost-vdpa: Handle the failure of vdpa_reset()
vdpa: Add reset callback in vdpa_config_ops
vdpa: Fix some coding style issues
file: Export receive_fd() to modules
eventfd: Export eventfd_wake_count to modules
iova: Export alloc_iova_fast() and free_iova_fast()
virtio-blk: remove unneeded "likely" statements
virtio-balloon: Use virtio_find_vqs() helper
vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
vsock_test: update message bounds test for MSG_EOR
af_vsock: rename variables in receive loop
virtio/vsock: support MSG_EOR bit processing
vhost/vsock: support MSG_EOR bit processing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- A pair of defconfig additions, for NVMe and the EFI filesystem
localization options.
- A larger address space for stack randomization.
- A cleanup to our install rules.
- A DTS update for the Microchip Icicle board, to fix the serial
console.
- Support for build-time table sorting, which allows us to have
__ex_table read-only.
* tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Move EXCEPTION_TABLE to RO_DATA segment
riscv: Enable BUILDTIME_TABLE_SORT
riscv: dts: microchip: mpfs-icicle: Fix serial console
riscv: move the (z)install rules to arch/riscv/Makefile
riscv: Improve stack randomisation on RV64
riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1
riscv: defconfig: enable BLK_DEV_NVME
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
"These changes update some existing semantic patches with
respect to some recent changes in the kernel.
Specifically, the change to kvmalloc.cocci searches for
kfree_sensitive rather than kzfree, and the change to
use_after_iter.cocci adds list_entry_is_head as a valid
use of a list iterator index variable after the end of
the loop"
* 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
scripts: coccinelle: allow list_entry_is_head() to use pos
coccinelle: api: rename kzfree to kfree_sensitive
|
|
Picking the changes from:
17ce9c61c71cbc0d ("drm: document DRM_IOCTL_MODE_RMFB")
Doesn't result in any tooling changes:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
Silencing these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|