summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-06Linux 4.1.47v4.1.47Sasha Levin
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06mm/pagewalk.c: report holes in hugetlb rangesJann Horn
[ Upstream commit 373c4557d2aa362702c4c2d41288fb1e54990b7c ] This matters at least for the mincore syscall, which will otherwise copy uninitialized memory from the page allocator to userspace. It is probably also a correctness error for /proc/$pid/pagemap, but I haven't tested that. Removing the `walk->hugetlb_entry` condition in walk_hugetlb_range() has no effect because the caller already checks for that. This only reports holes in hugetlb ranges to callers who have specified a hugetlb_entry callback. This issue was found using an AFL-based fuzzer. v2: - don't crash on ->pte_hole==NULL (Andrew Morton) - add Cc stable (Andrew Morton) Fixes: 1e25a271c8ac ("mincore: apply page table walker on do_mincore()") Signed-off-by: Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06mm/page_ext.c: check if page_ext is not preparedJaewon Kim
[ Upstream commit e492080e640c2d1235ddf3441cae634cfffef7e1 ] online_page_ext() and page_ext_init() allocate page_ext for each section, but they do not allocate if the first PFN is !pfn_present(pfn) or !pfn_valid(pfn). Then section->page_ext remains as NULL. lookup_page_ext checks NULL only if CONFIG_DEBUG_VM is enabled. For a valid PFN, __set_page_owner will try to get page_ext through lookup_page_ext. Without CONFIG_DEBUG_VM lookup_page_ext will misuse NULL pointer as value 0. This incurrs invalid address access. This is the panic example when PFN 0x100000 is not valid but PFN 0x13FC00 is being used for page_ext. section->page_ext is NULL, get_entry returned invalid page_ext address as 0x1DFA000 for a PFN 0x13FC00. To avoid this panic, CONFIG_DEBUG_VM should be removed so that page_ext will be checked at all times. Unable to handle kernel paging request at virtual address 01dfa014 ------------[ cut here ]------------ Kernel BUG at ffffff80082371e0 [verbose debug info unavailable] Internal error: Oops: 96000045 [#1] PREEMPT SMP Modules linked in: PC is at __set_page_owner+0x48/0x78 LR is at __set_page_owner+0x44/0x78 __set_page_owner+0x48/0x78 get_page_from_freelist+0x880/0x8e8 __alloc_pages_nodemask+0x14c/0xc48 __do_page_cache_readahead+0xdc/0x264 filemap_fault+0x2ac/0x550 ext4_filemap_fault+0x3c/0x58 __do_fault+0x80/0x120 handle_mm_fault+0x704/0xbb0 do_page_fault+0x2e8/0x394 do_mem_abort+0x88/0x124 Pre-4.7 kernels also need commit f86e4271978b ("mm: check the return value of lookup_page_ext for all call sites"). Link: http://lkml.kernel.org/r/20171107094131.14621-1-jaewon31.kim@samsung.com Fixes: eefa864b701d ("mm/page_ext: resurrect struct page extending code for debugging") Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: <stable@vger.kernel.org> [depends on f86e427197, see above] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06coda: fix 'kernel memory exposure attempt' in fsyncJan Harkes
[ Upstream commit d337b66a4c52c7b04eec661d86c2ef6e168965a2 ] When an application called fsync on a file in Coda a small request with just the file identifier was allocated, but the declared length was set to the size of union of all possible upcall requests. This bug has been around for a very long time and is now caught by the extra checking in usercopy that was introduced in Linux-4.8. The exposure happens when the Coda cache manager process reads the fsync upcall request at which point it is killed. As a result there is nobody servicing any further upcalls, trapping any processes that try to access the mounted Coda filesystem. Cc: stable@vger.kernel.org Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06ipmi: fix unsigned long underflowCorey Minyard
[ Upstream commit 392a17b10ec4320d3c0e96e2a23ebaad1123b989 ] When I set the timeout to a specific value such as 500ms, the timeout event will not happen in time due to the overflow in function check_msg_timeout: ... ent->timeout -= timeout_period; if (ent->timeout > 0) return; ... The type of timeout_period is long, but ent->timeout is unsigned long. This patch makes the type consistent. Reported-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Weilong Chen <chenweilong@huawei.com> Cc: <stable@vger.kernel.org> # 3.16.x Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06ocfs2: should wait dio before inode lock in ocfs2_setattr()alex chen
[ Upstream commit 28f5a8a7c033cbf3e32277f4cc9c6afd74f05300 ] we should wait dio requests to finish before inode lock in ocfs2_setattr(), otherwise the following deadlock will happen: process 1 process 2 process 3 truncate file 'A' end_io of writing file 'A' receiving the bast messages ocfs2_setattr ocfs2_inode_lock_tracker ocfs2_inode_lock_full inode_dio_wait __inode_dio_wait -->waiting for all dio requests finish dlm_proxy_ast_handler dlm_do_local_bast ocfs2_blocking_ast ocfs2_generic_handle_bast set OCFS2_LOCK_BLOCKED flag dio_end_io dio_bio_end_aio dio_complete ocfs2_dio_end_io ocfs2_dio_end_io_write ocfs2_inode_lock __ocfs2_cluster_lock ocfs2_wait_for_mask -->waiting for OCFS2_LOCK_BLOCKED flag to be cleared, that is waiting for 'process 1' unlocking the inode lock inode_dio_end -->here dec the i_dio_count, but will never be called, so a deadlock happened. Link: http://lkml.kernel.org/r/59F81636.70508@huawei.com Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Acked-by: Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06serial: omap: Fix EFR write on RTS deassertionLukas Wunner
[ Upstream commit 2a71de2f7366fb1aec632116d0549ec56d6a3940 ] Commit 348f9bb31c56 ("serial: omap: Fix RTS handling") sought to enable auto RTS upon manual RTS assertion and disable it on deassertion. However it seems the latter was done incorrectly, it clears all bits in the Extended Features Register *except* auto RTS. Fixes: 348f9bb31c56 ("serial: omap: Fix RTS handling") Cc: Peter Hurley <peter@hurleysoftware.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06ima: do not update security.ima if appraisal status is not INTEGRITY_PASSRoberto Sassu
[ Upstream commit 020aae3ee58c1af0e7ffc4e2cc9fe4dc630338cb ] Commit b65a9cfc2c38 ("Untangling ima mess, part 2: deal with counters") moved the call of ima_file_check() from may_open() to do_filp_open() at a point where the file descriptor is already opened. This breaks the assumption made by IMA that file descriptors being closed belong to files whose access was granted by ima_file_check(). The consequence is that security.ima and security.evm are updated with good values, regardless of the current appraisal status. For example, if a file does not have security.ima, IMA will create it after opening the file for writing, even if access is denied. Access to the file will be allowed afterwards. Avoid this issue by checking the appraisal status before updating security.ima. Cc: stable@vger.kernel.org Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06net/sctp: Always set scope_id in sctp_inet6_skb_msgnameEric W. Biederman
[ Upstream commit 7c8a61d9ee1df0fb4747879fa67a99614eb62fec ] Alexandar Potapenko while testing the kernel with KMSAN and syzkaller discovered that in some configurations sctp would leak 4 bytes of kernel stack. Working with his reproducer I discovered that those 4 bytes that are leaked is the scope id of an ipv6 address returned by recvmsg. With a little code inspection and a shrewd guess I discovered that sctp_inet6_skb_msgname only initializes the scope_id field for link local ipv6 addresses to the interface index the link local address pertains to instead of initializing the scope_id field for all ipv6 addresses. That is almost reasonable as scope_id's are meaniningful only for link local addresses. Set the scope_id in all other cases to 0 which is not a valid interface index to make it clear there is nothing useful in the scope_id field. There should be no danger of breaking userspace as the stack leak guaranteed that previously meaningless random data was being returned. Fixes: 372f525b495c ("SCTP: Resync with LKSCTP tree.") History-tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Reported-by: Alexander Potapenko <glider@google.com> Tested-by: Alexander Potapenko <glider@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06fealnx: Fix building error on MIPSHuacai Chen
[ Upstream commit cc54c1d32e6a4bb3f116721abf900513173e4d02 ] This patch try to fix the building error on MIPS. The reason is MIPS has already defined the LONG macro, which conflicts with the LONG enum in drivers/net/ethernet/fealnx.c. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06af_netlink: ensure that NLMSG_DONE never fails in dumpsJason A. Donenfeld
[ Upstream commit 0642840b8bb008528dbdf929cec9f65ac4231ad0 ] The way people generally use netlink_dump is that they fill in the skb as much as possible, breaking when nla_put returns an error. Then, they get called again and start filling out the next skb, and again, and so forth. The mechanism at work here is the ability for the iterative dumping function to detect when the skb is filled up and not fill it past the brim, waiting for a fresh skb for the rest of the data. However, if the attributes are small and nicely packed, it is possible that a dump callback function successfully fills in attributes until the skb is of size 4080 (libmnl's default page-sized receive buffer size). The dump function completes, satisfied, and then, if it happens to be that this is actually the last skb, and no further ones are to be sent, then netlink_dump will add on the NLMSG_DONE part: nlh = nlmsg_put_answer(skb, cb, NLMSG_DONE, sizeof(len), NLM_F_MULTI); It is very important that netlink_dump does this, of course. However, in this example, that call to nlmsg_put_answer will fail, because the previous filling by the dump function did not leave it enough room. And how could it possibly have done so? All of the nla_put variety of functions simply check to see if the skb has enough tailroom, independent of the context it is in. In order to keep the important assumptions of all netlink dump users, it is therefore important to give them an skb that has this end part of the tail already reserved, so that the call to nlmsg_put_answer does not fail. Otherwise, library authors are forced to find some bizarre sized receive buffer that has a large modulo relative to the common sizes of messages received, which is ugly and buggy. This patch thus saves the NLMSG_DONE for an additional message, for the case that things are dangerously close to the brim. This requires keeping track of the errno from ->dump() across calls. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06vlan: fix a use-after-free in vlan_device_event()Cong Wang
[ Upstream commit 052d41c01b3a2e3371d66de569717353af489d63 ] After refcnt reaches zero, vlan_vid_del() could free dev->vlan_info via RCU: RCU_INIT_POINTER(dev->vlan_info, NULL); call_rcu(&vlan_info->rcu, vlan_info_rcu_free); However, the pointer 'grp' still points to that memory since it is set before vlan_vid_del(): vlan_info = rtnl_dereference(dev->vlan_info); if (!vlan_info) goto out; grp = &vlan_info->grp; Depends on when that RCU callback is scheduled, we could trigger a use-after-free in vlan_group_for_each_dev() right following this vlan_vid_del(). Fix it by moving vlan_vid_del() before setting grp. This is also symmetric to the vlan_vid_add() we call in vlan_device_event(). Reported-by: Fengguang Wu <fengguang.wu@intel.com> Fixes: efc73f4bbc23 ("net: Fix memory leak - vlan_info struct") Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Girish Moodalbail <girish.moodalbail@oracle.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Girish Moodalbail <girish.moodalbail@oracle.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06bonding: discard lowest hash bit for 802.3ad layer3+4Hangbin Liu
[ Upstream commit b5f862180d7011d9575d0499fa37f0f25b423b12 ] After commit 07f4c90062f8 ("tcp/dccp: try to not exhaust ip_local_port_range in connect()"), we will try to use even ports for connect(). Then if an application (seen clearly with iperf) opens multiple streams to the same destination IP and port, each stream will be given an even source port. So the bonding driver's simple xmit_hash_policy based on layer3+4 addressing will always hash all these streams to the same interface. And the total throughput will limited to a single slave. Change the tcp code will impact the whole tcp behavior, only for bonding usage. Paolo Abeni suggested fix this by changing the bonding code only, which should be more reasonable, and less impact. Fix this by discarding the lowest hash bit because it contains little entropy. After the fix we can re-balance between slaves. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06netfilter/ipvs: clear ipvs_property flag when SKB net namespace changedYe Yin
[ Upstream commit 2b5ec1a5f9738ee7bf8f5ec0526e75e00362c48f ] When run ipvs in two different network namespace at the same host, and one ipvs transport network traffic to the other network namespace ipvs. 'ipvs_property' flag will make the second ipvs take no effect. So we should clear 'ipvs_property' when SKB network namespace changed. Fixes: 621e84d6f373 ("dev: introduce skb_scrub_packet()") Signed-off-by: Ye Yin <hustcat@gmail.com> Signed-off-by: Wei Zhou <chouryzhou@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06tcp: do not mangle skb->cb[] in tcp_make_synack()Eric Dumazet
[ Upstream commit 3b11775033dc87c3d161996c54507b15ba26414a ] Christoph Paasch sent a patch to address the following issue : tcp_make_synack() is leaving some TCP private info in skb->cb[], then send the packet by other means than tcp_transmit_skb() tcp_transmit_skb() makes sure to clear skb->cb[] to not confuse IPv4/IPV6 stacks, but we have no such cleanup for SYNACK. tcp_make_synack() should not use tcp_init_nondata_skb() : tcp_init_nondata_skb() really should be limited to skbs put in write/rtx queues (the ones that are only sent via tcp_transmit_skb()) This patch fixes the issue and should even save few cpu cycles ;) Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06USB: serial: garmin_gps: fix memory leak on probe errorsJohan Hovold
[ Upstream commit 74d471b598444b7f2d964930f7234779c80960a0 ] Make sure to free the port private data before returning after a failed probe attempt. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06USB: serial: garmin_gps: fix I/O after failed probe and removeJohan Hovold
[ Upstream commit 19a565d9af6e0d828bd0d521d3bafd5017f4ce52 ] Make sure to stop any submitted interrupt and bulk-out URBs before returning after failed probe and when the port is being unbound to avoid later NULL-pointer dereferences in the completion callbacks. Also fix up the related and broken I/O cancellation on failed open and on close. (Note that port->write_urb was never submitted.) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> # 51a2f077 ("USB: introduce usb_anchor") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06USB: serial: qcserial: add pid/vid for Sierra Wireless EM7355 fw updateDouglas Fischer
[ Upstream commit 771394a54148f18926ca86414e51c69eda27d0cd ] Add USB PID/VID for Sierra Wireless EM7355 LTE modem QDL firmware update mode. Signed-off-by: Douglas Fischer <douglas.fischer@outlook.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06USB: Add delay-init quirk for Corsair K70 LUX keyboardsBernhard Rosenkraenzer
[ Upstream commit a0fea6027f19c62727315aba1a7fae75a9caa842 ] Without this patch, K70 LUX keyboards don't work, saying usb 3-3: unable to read config index 0 descriptor/all usb 3-3: can't read configurations, error -110 usb usb3-port3: unable to enumerate USB device Signed-off-by: Bernhard Rosenkraenzer <Bernhard.Rosenkranzer@linaro.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06USB: usbfs: compute urb->actual_length for isochronousAlan Stern
[ Upstream commit 2ef47001b3ee3ded579b7532ebdcf8680e4d8c54 ] The USB kerneldoc says that the actual_length field "is read in non-iso completion functions", but the usbfs driver uses it for all URB types in processcompl(). Since not all of the host controller drivers set actual_length for isochronous URBs, programs using usbfs with some host controllers don't work properly. For example, Minas reports that a USB camera controlled by libusb doesn't work properly with a dwc2 controller. It doesn't seem worthwhile to change the HCDs and the documentation, since the in-kernel USB class drivers evidently don't rely on actual_length for isochronous transfers. The easiest solution is for usbfs to calculate the actual_length value for itself, by adding up the lengths of the individual packets in an isochronous transfer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Reported-and-tested-by: wlf <wulf@rock-chips.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06MIPS: Netlogic: Exclude netlogic,xlp-pic code from XLR buildsPaul Burton
[ Upstream commit 9799270affc53414da96e77e454a5616b39cdab0 ] Code in arch/mips/netlogic/common/irq.c which handles the XLP PIC fails to build in XLR configurations due to cpu_is_xlp9xx not being defined, leading to the following build failure: arch/mips/netlogic/common/irq.c: In function ‘xlp_of_pic_init’: arch/mips/netlogic/common/irq.c:298:2: error: implicit declaration of function ‘cpu_is_xlp9xx’ [-Werror=implicit-function-declaration] if (cpu_is_xlp9xx()) { ^ Although the code was conditional upon CONFIG_OF which is indirectly selected by CONFIG_NLM_XLP_BOARD but not CONFIG_NLM_XLR_BOARD, the failing XLR with CONFIG_OF configuration can be configured manually or by randconfig. Fix the build failure by making the affected XLP PIC code conditional upon CONFIG_CPU_XLP which is used to guard the inclusion of asm/netlogic/xlp-hal/xlp.h that provides the required cpu_is_xlp9xx function. [ralf@linux-mips.org: Fixed up as per Jayachandran's suggestion.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14524/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06MIPS: init: Ensure reserved memory regions are not added to bootmemMarcin Nowakowski
[ Upstream commit e89ef66d7682f031f026eee6bba03c8c2248d2a9 ] Memories managed through boot_mem_map are generally expected to define non-crossing areas. However, if part of a larger memory block is marked as reserved, it would still be added to bootmem allocator as an available block and could end up being overwritten by the allocator. Prevent this by explicitly marking the memory as reserved it if exists in the range used by bootmem allocator. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14608/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06MIPS: init: Ensure bootmem does not corrupt reserved memoryMarcin Nowakowski
[ Upstream commit d9b5b658210f28ed9f70c757d553e679d76e2986 ] Current init code initialises bootmem allocator with all of the low memory that it assumes is available, but does not check for reserved memory block, which can lead to corruption of data that may be stored there. Move bootmem's allocation map to a location that does not cross any reserved regions Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14609/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06MIPS: End asm function prologue macros with .insnPaul Burton
[ Upstream commit 08889582b8aa0bbc01a1e5a0033b9f98d2e11caa ] When building a kernel targeting a microMIPS ISA, recent GNU linkers will fail the link if they cannot determine that the target of a branch or jump is microMIPS code, with errors such as the following: mips-img-linux-gnu-ld: arch/mips/built-in.o: .text+0x542c: Unsupported jump between ISA modes; consider recompiling with interlinking enabled. mips-img-linux-gnu-ld: final link failed: Bad value or: ./arch/mips/include/asm/uaccess.h:1017: warning: JALX to a non-word-aligned address Placing anything other than an instruction at the start of a function written in assembly appears to trigger such errors. In order to prepare for allowing us to follow function prologue macros with an EXPORT_SYMBOL invocation, end the prologue macros (LEAD, NESTED & FEXPORT) with a .insn directive. This ensures that the start of the function is marked as code, which always makes sense for functions & safely prevents us from hitting the link errors described above. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Maciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14508/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06ixgbe: add mask for 64 RSS queuesEmil Tantilov
[ Upstream commit 2bf1a87b903bd81b1448a1cef73de59fb6c4d340 ] The indirection table was reported incorrectly for X550 and newer where we can support up to 64 RSS queues. Reported-by Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06ixgbe: handle close/suspend race with netif_device_detach/presentEmil Tantilov
[ Upstream commit f7f37e7ff2b9b7eff7fbd035569cab35896869a3 ] When an interface is part of a namespace it is possible that ixgbe_close() may be called while __ixgbe_shutdown() is running which ends up in a double free WARN and/or a BUG in free_msi_irqs(). To handle this situation we extend the rtnl_lock() to protect the call to netif_device_detach() and ixgbe_clear_interrupt_scheme() in __ixgbe_shutdown() and check for netif_device_present() to avoid clearing the interrupts second time in ixgbe_close(); Also extend the rtnl lock in ixgbe_resume() to netif_device_attach(). Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06ixgbe: fix AER error handlingEmil Tantilov
[ Upstream commit 126db13fa0e6d05c9f94e0125f61e773bd5ab079 ] Make sure that we free the IRQs in ixgbe_io_error_detected() when responding to an PCIe AER error and also restore them when the interface recovers from it. Previously it was possible to trigger BUG_ON() check in free_msix_irqs() in the case where we call ixgbe_remove() after a failed recovery from AER error because the interrupts were not freed. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06gpu: drm: mgag200: mgag200_main:- Handle error from pci_iomapArvind Yadav
[ Upstream commit 4b0ea93f250afc6c1128e201b0a8a115ae613e47 ] Here, pci_iomap can fail, handle this case and return -ENOMEM. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483443027-13444-1-git-send-email-arvind.yadav.cs@gmail.com Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06backlight: adp5520: Fix error handling in adp5520_bl_probe()Alexey Khoroshilov
[ Upstream commit 0eb3fba8c68275f0122f65f7316efaaf86448016 ] If adp5520_bl_setup() fails, sysfs group left unremoved. By the way, fix overcomplicated assignement of error code. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06backlight: lcd: Fix race condition during registerUwe Kleine-König
[ Upstream commit cc21942bce652d1a92dae85b785378256e1df1f7 ] Once device_register is called for a device its attributes might be accessed. As the callbacks of a lcd device's attributes make use of the lcd_ops, the respective member must be setup before calling device_register. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06ALSA: vx: Fix possible transfer overflowTakashi Iwai
[ Upstream commit 874e1f6fad9a5184b67f4cee37c1335cd2cc5677 ] The pseudo DMA transfer codes in VX222 and VX-pocket driver have a slight bug where they check the buffer boundary wrongly, and may overflow. Also, the zero sample count might be handled badly for the playback (although it shouldn't happen in theory). This patch addresses these issues. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=141541 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06ALSA: vx: Don't try to update capture stream before runningTakashi Iwai
[ Upstream commit ed3c177d960bb5881b945ca6f784868126bb90db ] The update of stream costs significantly, and we should avoid it unless the stream really has started. Check pipe->running flag instead of pipe->prepared. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06scsi: lpfc: Correct issue leading to oops during link resetJames Smart
[ Upstream commit e6c6acc0e0223ddaf867628d420ee196349c6fae ] Correct issue leading to oops during link reset. Missing vport pointer. [mkp: fixed typo] Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06scsi: lpfc: Correct host name in symbolic_name fieldJames Smart
[ Upstream commit 6c9231f604c2575be24c96d38deb70f145172f92 ] Correct host name in symbolic_name field of nameserver registrations Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06scsi: lpfc: FCoE VPort enable-disable does not bring up the VPortJames Smart
[ Upstream commit 104450eb08ca662e6b1d02da11aca9598e978f3e ] FCoE VPort enable-disable does not bring up the VPort. VPI structure needed to be initialized before being re-registered. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06scsi: lpfc: Add missing memory barrierJames Smart
[ Upstream commit 6b3b3bdb83b4ad51252d21bb13596db879e51850 ] On loosely ordered memory systems (PPC for example), the WQE elements were being updated in memory, but not necessarily flushed before the separate doorbell was written to hw which would cause hw to dma the WQE element. Thus, the hardware occasionally received partially updated WQE data. Add the memory barrier after updating the WQE memory. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06staging: rtl8188eu: fix incorrect ERROR tags from logsGalo Navarro
[ Upstream commit 401579c22ccbcb54244494069973e64b1fe980d2 ] Several lifecycle events in the rtl8188eu driver are logged using the DBG_88E_LEVEL macro from rtw_debug.h, which is tagged as ERROR regardless of the actual level. Below are dmesg excerpts after loading and unloading the module, the messages are misleading as there was no error. [517434.916239] usbcore: registered new interface driver r8188eu [517435.680653] R8188EU: ERROR indicate disassoc [517437.122606] R8188EU: ERROR assoc success [517797.735611] usbcore: deregistering interface driver r8188eu [517797.736069] R8188EU: ERROR indicate disassoc Remove the ERROR prefix from the logs. After the patch, logs are: [517949.873976] usbcore: registered new interface driver r8188eu [517950.592845] R8188EU: indicate disassoc [517951.993973] R8188EU: assoc success [521778.784448] usbcore: deregistering interface driver r8188eu [521778.784838] R8188EU: indicate disassoc Signed-off-by: Galo Navarro <anglorvaroa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06igb: Fix hw_dbg logging in igb_update_flash_i210Hannu Lounento
[ Upstream commit 76ed5a8f47476e4984cc8c0c1bc4cee62650f7fd ] Fix an if statement with hw_dbg lines where the logic was inverted with regards to the corresponding return value used in the if statement. Signed-off-by: Hannu Lounento <hannu.lounento@ge.com> Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06igb: close/suspend race in netif_device_detachTodd Fujinaka
[ Upstream commit 9474933caf21a4cb5147223dca1551f527aaac36 ] Similar to ixgbe, when an interface is part of a namespace it is possible that igb_close() may be called while __igb_shutdown() is running which ends up in a double free WARN and/or a BUG in free_msi_irqs(). Extend the rtnl_lock() to protect the call to netif_device_detach() and igb_clear_interrupt_scheme() in __igb_shutdown() and check for netif_device_present() to avoid calling igb_clear_interrupt_scheme() a second time in igb_close(). Also extend the rtnl lock in igb_resume() to netif_device_attach(). Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06igb: reset the PHY before reading the PHY IDAaron Sierra
[ Upstream commit 182785335447957409282ca745aa5bc3968facee ] Several people have reported firmware leaving the I210/I211 PHY's page select register set to something other than the default of zero. This causes the first accesses, PHY_IDx register reads, to access something else, resulting in device probe failure: igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k igb: Copyright (c) 2007-2014 Intel Corporation. igb: probe of 0000:01:00.0 failed with error -2 This problem began for them after a previous patch I submitted was applied: commit 2a3cdead8b408351fa1e3079b220fa331480ffbc Author: Aaron Sierra <asierra@xes-inc.com> Date: Tue Nov 3 12:37:09 2015 -0600 igb: Remove GS40G specific defines/functions I personally experienced this problem after attempting to PXE boot from I210 devices using this firmware: Intel(R) Boot Agent GE v1.5.78 Copyright (C) 1997-2014, Intel Corporation Resetting the PHY before reading from it, ensures the page select register is in its default state and doesn't make assumptions about the PHY's register set before the PHY has been probed. Cc: Matwey V. Kornilov <matwey@sai.msu.ru> Cc: Chris Arges <carges@vectranetworks.com> Cc: Jochen Henneberg <jh@henneberg-systemdesign.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Tested-by: Matwey V. Kornilov <matwey@sai.msu.ru> Tested-by: Chris J Arges <christopherarges@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06drm/sti: sti_vtg: Handle return NULL error from devm_ioremap_nocacheArvind Yadav
[ Upstream commit 1ae0d5af347df224a6e76334683f13a96d915a44 ] Here, If devm_ioremap_nocache will fail. It will return NULL. Kernel can run into a NULL-pointer dereference. This error check will avoid NULL pointer dereference. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Vincent Abriou <vincent.abriou@st.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06ata: SATA_MV should depend on HAS_DMAGeert Uytterhoeven
[ Upstream commit 62989cebd367a1aae1e009e1a5b1ec046a4c8fdc ] If NO_DMA=y: ERROR: "dma_pool_alloc" [drivers/ata/sata_mv.ko] undefined! ERROR: "dmam_pool_create" [drivers/ata/sata_mv.ko] undefined! ERROR: "dma_pool_free" [drivers/ata/sata_mv.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06ata: SATA_HIGHBANK should depend on HAS_DMAGeert Uytterhoeven
[ Upstream commit 2a736e0585e585c2566b5119af8381910a170e44 ] If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/ata/sata_highbank.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06ata: ATA_BMDMA should depend on HAS_DMAGeert Uytterhoeven
[ Upstream commit 7bc7ab1e63dfe004931502f90ce7020e375623da ] If NO_DMA=y: ERROR: "dmam_alloc_coherent" [drivers/ata/libata.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06ARM: dts: Fix omap3 off mode pull definesTony Lindgren
[ Upstream commit d97556c8012015901a3ce77f46960078139cd79d ] We need to also have OFFPULLUDENABLE bit set to use the off mode pull values. Otherwise the line is pulled down internally if no external pull exists. This is has some documentation at: http://processors.wiki.ti.com/index.php/Optimizing_OMAP35x_and_AM/DM37x_OFF_mode_PAD_configuration Note that the value is still glitchy during off mode transitions as documented in spz319f.pdf "Advisory 1.45". It's best to use external pulls instead of relying on the internal ones for off mode and even then anything pulled up will get driven down momentarily on off mode restore for GPIO banks other than bank1. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06ARM: OMAP2+: Fix init for multiple quirks for the same SoCTony Lindgren
[ Upstream commit 6e613ebf4405fc09e2a8c16ed193b47f80a3cbed ] It's possible that there are multiple quirks that need to be initialized for the same SoC. Fix the issue by not returning on the first match. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06fm10k: request reset when mbx->state changesNgai-Mint Kwan
[ Upstream commit 2f3fc1e6200309ccf87f61dea56e57e563c4f800 ] Multiple IES API resets can cause a race condition where the mailbox interrupt request bits can be cleared before being handled. This can leave certain mailbox messages from the PF to be untreated and the PF will enter in some inactive state. If this situation occurs, the IES API will initiate a mailbox version reset which, then, trigger a mailbox state change. Once this mailbox transition occurs (from OPEN to CONNECT state), a request for reset will be returned. This ensures that PF will undergo a reset whenever IES API encounters an unknown global mailbox interrupt event or whenever the IES API terminates. Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06extcon: palmas: Check the parent instance to prevent the NULLRoger Quadros
[ Upstream commit 9fe172b9be532acc23e35ba693700383ab775e66 ] extcon-palmas must be child of palmas and expects parent's drvdata to be valid. Check for non NULL parent drvdata and fail if it is NULL. Not doing so will result in a NULL pointer dereference later in the probe() parent drvdata is NULL (e.g. misplaced extcon-palmas node in device tree). Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06dmaengine: dmatest: warn user when dma test times outAdam Wallis
[ Upstream commit a9df21e34b422f79d9a9fa5c3eff8c2a53491be6 ] Commit adfa543e7314 ("dmatest: don't use set_freezable_with_signal()") introduced a bug (that is in fact documented by the patch commit text) that leaves behind a dangling pointer. Since the done_wait structure is allocated on the stack, future invocations to the DMATEST can produce undesirable results (e.g., corrupted spinlocks). Ideally, this would be cleaned up in the thread handler, but at the very least, the kernel is left in a very precarious scenario that can lead to some long debug sessions when the crash comes later. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197605 Signed-off-by: Adam Wallis <awallis@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-12-06net: qmi_wwan: fix divide by 0 on bad descriptorsBjørn Mork
[ Upstream commit 7fd078337201cf7468f53c3d9ef81ff78cb6df3b ] A CDC Ethernet functional descriptor with wMaxSegmentSize = 0 will cause a divide error in usbnet_probe: divide error: 0000 [#1] PREEMPT SMP KASAN Modules linked in: CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc8-44453-g1fdc1a82c34f #56 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006bef5c00 task.stack: ffff88006bf60000 RIP: 0010:usbnet_update_max_qlen+0x24d/0x390 drivers/net/usb/usbnet.c:355 RSP: 0018:ffff88006bf67508 EFLAGS: 00010246 RAX: 00000000000163c8 RBX: ffff8800621fce40 RCX: ffff8800621fcf34 RDX: 0000000000000000 RSI: ffffffff837ecb7a RDI: ffff8800621fcf34 RBP: ffff88006bf67520 R08: ffff88006bef5c00 R09: ffffed000c43f881 R10: ffffed000c43f880 R11: ffff8800621fc406 R12: 0000000000000003 R13: ffffffff85c71de0 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88006ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe9c0d6dac CR3: 00000000614f4000 CR4: 00000000000006f0 Call Trace: usbnet_probe+0x18b5/0x2790 drivers/net/usb/usbnet.c:1783 qmi_wwan_probe+0x133/0x220 drivers/net/usb/qmi_wwan.c:1338 usb_probe_interface+0x324/0x940 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x522/0x740 drivers/base/dd.c:557 Fix by simply ignoring the bogus descriptor, as it is optional for QMI devices anyway. Fixes: 423ce8caab7e ("net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-17 18:47:07 +0000