summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-05Linux 4.14.105v4.14.105Greg Kroah-Hartman
2019-03-05x86/uaccess: Don't leak the AC flag into __put_user() value evaluationAndy Lutomirski
commit 2a418cf3f5f1caf911af288e978d61c9844b0695 upstream. When calling __put_user(foo(), ptr), the __put_user() macro would call foo() in between __uaccess_begin() and __uaccess_end(). If that code were buggy, then those bugs would be run without SMAP protection. Fortunately, there seem to be few instances of the problem in the kernel. Nevertheless, __put_user() should be fixed to avoid doing this. Therefore, evaluate __put_user()'s argument before setting AC. This issue was noticed when an objtool hack by Peter Zijlstra complained about genregs_get() and I compared the assembly output to the C source. [ bp: Massage commit message and fixed up whitespace. ] Fixes: 11f1a4b9755f ("x86: reorganize SMAP handling in user space accesses") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190225125231.845656645@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05MIPS: eBPF: Fix icache flush end addressPaul Burton
commit d1a2930d8a992fb6ac2529449f81a0056e1b98d1 upstream. The MIPS eBPF JIT calls flush_icache_range() in order to ensure the icache observes the code that we just wrote. Unfortunately it gets the end address calculation wrong due to some bad pointer arithmetic. The struct jit_ctx target field is of type pointer to u32, and as such adding one to it will increment the address being pointed to by 4 bytes. Therefore in order to find the address of the end of the code we simply need to add the number of 4 byte instructions emitted, but we mistakenly add the number of instructions multiplied by 4. This results in the call to flush_icache_range() operating on a memory region 4x larger than intended, which is always wasteful and can cause crashes if we overrun into an unmapped page. Fix this by correcting the pointer arithmetic to remove the bogus multiplication, and use braces to remove the need for a set of brackets whilst also making it obvious that the target field is a pointer. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.") Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: netdev@vger.kernel.org Cc: bpf@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05MIPS: fix truncation in __cmpxchg_small for short valuesMichael Clark
commit 94ee12b507db8b5876e31c9d6c9d84f556a4b49f upstream. __cmpxchg_small erroneously uses u8 for load comparison which can be either char or short. This patch changes the local variable to u32 which is sufficiently sized, as the loaded value is already masked and shifted appropriately. Using an integer size avoids any unnecessary canonicalization from use of non native widths. This patch is part of a series that adapts the MIPS small word atomics code for xchg and cmpxchg on short and char to RISC-V. Cc: RISC-V Patches <patches@groups.riscv.org> Cc: Linux RISC-V <linux-riscv@lists.infradead.org> Cc: Linux MIPS <linux-mips@linux-mips.org> Signed-off-by: Michael Clark <michaeljclark@mac.com> [paul.burton@mips.com: - Fix varialble typo per Jonas Gorski. - Consolidate load variable with other declarations.] Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 3ba7f44d2b19 ("MIPS: cmpxchg: Implement 1 byte & 2 byte cmpxchg()") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mm: enforce min addr even if capable() in expand_downwards()Jann Horn
commit 0a1d52994d440e21def1c2174932410b4f2a98a1 upstream. security_mmap_addr() does a capability check with current_cred(), but we can reach this code from contexts like a VFS write handler where current_cred() must not be used. This can be abused on systems without SMAP to make NULL pointer dereferences exploitable again. Fixes: 8869477a49c3 ("security: protect from stack expansion into low vm addresses") Cc: stable@kernel.org Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mmc: sdhci-esdhc-imx: correct the fix of ERR004536BOUGH CHEN
commit e30be063d6dbcc0f18b1eb25fa709fdef89201fb upstream. Commit 18094430d6b5 ("mmc: sdhci-esdhc-imx: add ADMA Length Mismatch errata fix") involve the fix of ERR004536, but the fix is incorrect. Double confirm with IC, need to clear the bit 7 of register 0x6c rather than set this bit 7. Here is the definition of bit 7 of 0x6c: 0: enable the new IC fix for ERR004536 1: do not use the IC fix, keep the same as before Find this issue on i.MX845s-evk board when enable CMDQ, and let system in heavy loading. root@imx8mmevk:~# dd if=/dev/mmcblk2 of=/dev/null bs=1M & root@imx8mmevk:~# memtester 1000M > /dev/zero & root@imx8mmevk:~# [ 139.897220] mmc2: cqhci: timeout for tag 16 [ 139.901417] mmc2: cqhci: ============ CQHCI REGISTER DUMP =========== [ 139.907862] mmc2: cqhci: Caps: 0x0000310a | Version: 0x00000510 [ 139.914311] mmc2: cqhci: Config: 0x00001001 | Control: 0x00000000 [ 139.920753] mmc2: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 [ 139.927193] mmc2: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 [ 139.933634] mmc2: cqhci: TDL base: 0x7809c000 | TDL up32: 0x00000000 [ 139.940073] mmc2: cqhci: Doorbell: 0x00030000 | TCN: 0x00000000 [ 139.946518] mmc2: cqhci: Dev queue: 0x00010000 | Dev Pend: 0x00010000 [ 139.952967] mmc2: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000 [ 139.959411] mmc2: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000000 [ 139.965857] mmc2: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 [ 139.972308] mmc2: cqhci: Resp idx: 0x0000002e | Resp arg: 0x00000900 [ 139.978761] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== [ 139.985214] mmc2: sdhci: Sys addr: 0xb2c19000 | Version: 0x00000002 [ 139.991669] mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000400 [ 139.998127] mmc2: sdhci: Argument: 0x40110400 | Trn mode: 0x00000033 [ 140.004618] mmc2: sdhci: Present: 0x01088a8f | Host ctl: 0x00000030 [ 140.011113] mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 [ 140.017583] mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f [ 140.024039] mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 [ 140.030497] mmc2: sdhci: Int enab: 0x107f4000 | Sig enab: 0x107f4000 [ 140.036972] mmc2: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000502 [ 140.043426] mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407 [ 140.049867] mmc2: sdhci: Cmd: 0x00002c1a | Max curr: 0x00ffffff [ 140.056314] mmc2: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0xffffffff [ 140.062755] mmc2: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d00f00 [ 140.069195] mmc2: sdhci: Host ctl2: 0x00000008 [ 140.073640] mmc2: sdhci: ADMA Err: 0x00000007 | ADMA Ptr: 0x7809c108 [ 140.080079] mmc2: sdhci: ============================================ [ 140.086662] mmc2: running CQE recovery Fixes: 18094430d6b5 ("mmc: sdhci-esdhc-imx: add ADMA Length Mismatch errata fix") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mmc: tmio: fix access width of Block Count RegisterTakeshi Saito
commit 5603731a15ef9ca317c122cc8c959f1dee1798b4 upstream. In R-Car Gen2 or later, the maximum number of transfer blocks are changed from 0xFFFF to 0xFFFFFFFF. Therefore, Block Count Register should use iowrite32(). If another system (U-boot, Hypervisor OS, etc) uses bit[31:16], this value will not be cleared. So, SD/MMC card initialization fails. So, check for the bigger register and use apropriate write. Also, mark the register as extended on Gen2. Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: use max_blk_count in if(), add Gen2, update commit message] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: stable@kernel.org Reviewed-by: Simon Horman <horms+renesas@verge.net.au> [Ulf: Fixed build error] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mmc: tmio_mmc_core: don't claim spurious interruptsSergei Shtylyov
commit 5c27ff5db1491a947264d6d4e4cbe43ae6535bae upstream. I have encountered an interrupt storm during the eMMC chip probing (and the chip finally didn't get detected). It turned out that U-Boot left the DMAC interrupts enabled while the Linux driver didn't use those. The SDHI driver's interrupt handler somehow assumes that, even if an SDIO interrupt didn't happen, it should return IRQ_HANDLED. I think that if none of the enabled interrupts happened and got handled, we should return IRQ_NONE -- that way the kernel IRQ code recoginizes a spurious interrupt and masks it off pretty quickly... Fixes: 7729c7a232a9 ("mmc: tmio: Provide separate interrupt handlers") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mmc: spi: Fix card detection during probeJonathan Neuschäfer
commit c9bd505dbd9d3dc80c496f88eafe70affdcf1ba6 upstream. When using the mmc_spi driver with a card-detect pin, I noticed that the card was not detected immediately after probe, but only after it was unplugged and plugged back in (and the CD IRQ fired). The call tree looks something like this: mmc_spi_probe mmc_add_host mmc_start_host _mmc_detect_change mmc_schedule_delayed_work(&host->detect, 0) mmc_rescan host->bus_ops->detect(host) mmc_detect _mmc_detect_card_removed host->ops->get_cd(host) mmc_gpio_get_cd -> -ENOSYS (ctx->cd_gpio not set) mmc_gpiod_request_cd ctx->cd_gpio = desc To fix this issue, call mmc_detect_change after the card-detect GPIO/IRQ is registered. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05powerpc: Always initialize input array when calling epapr_hypercall()Seth Forshee
commit 186b8f1587c79c2fa04bfa392fdf084443e398c1 upstream. Several callers to epapr_hypercall() pass an uninitialized stack allocated array for the input arguments, presumably because they have no input arguments. However this can produce errors like this one arch/powerpc/include/asm/epapr_hcalls.h:470:42: error: 'in' may be used uninitialized in this function [-Werror=maybe-uninitialized] unsigned long register r3 asm("r3") = in[0]; ~~^~~ Fix callers to this function to always zero-initialize the input arguments array to prevent this. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Cc: "A. Wilcox" <awilfox@adelielinux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting ↵Vitaly Kuznetsov
to L1 [ Upstream commit 619ad846fc3452adaf71ca246c5aa711e2055398 ] kvm-unit-tests' eventinj "NMI failing on IDT" test results in NMI being delivered to the host (L1) when it's running nested. The problem seems to be: svm_complete_interrupts() raises 'nmi_injected' flag but later we decide to reflect EXIT_NPF to L1. The flag remains pending and we do NMI injection upon entry so it got delivered to L1 instead of L2. It seems that VMX code solves the same issue in prepare_vmcs12(), this was introduced with code refactoring in commit 5f3d5799974b ("KVM: nVMX: Rework event injection and recovery"). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05svm: Fix AVIC incomplete IPI emulationSuravee Suthikulpanit
[ Upstream commit bb218fbcfaaa3b115d4cd7a43c0ca164f3a96e57 ] In case of incomplete IPI with invalid interrupt type, the current SVM driver does not properly emulate the IPI, and fails to boot FreeBSD guests with multiple vcpus when enabling AVIC. Fix this by update APIC ICR high/low registers, which also emulate sending the IPI. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05cfg80211: extend range deviation for DMGChaitanya Tata
[ Upstream commit 93183bdbe73bbdd03e9566c8dc37c9d06b0d0db6 ] Recently, DMG frequency bands have been extended till 71GHz, so extend the range check till 20GHz (45-71GHZ), else some channels will be marked as disabled. Signed-off-by: Chaitanya Tata <Chaitanya.Tata@bluwireless.co.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05mac80211: Add attribute aligned(2) to struct 'action'Mathieu Malaterre
[ Upstream commit 7c53eb5d87bc21464da4268c3c0c47457b6d9c9b ] During refactor in commit 9e478066eae4 ("mac80211: fix MU-MIMO follow-MAC mode") a new struct 'action' was declared with packed attribute as: struct { struct ieee80211_hdr_3addr hdr; u8 category; u8 action_code; } __packed action; But since struct 'ieee80211_hdr_3addr' is declared with an aligned keyword as: struct ieee80211_hdr { __le16 frame_control; __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; __le16 seq_ctrl; u8 addr4[ETH_ALEN]; } __packed __aligned(2); Solve the ambiguity of placing aligned structure in a packed one by adding the aligned(2) attribute to struct 'action'. This removes the following warning (W=1): net/mac80211/rx.c:234:2: warning: alignment 1 of 'struct <anonymous>' is less than 2 [-Wpacked-not-aligned] Cc: Johannes Berg <johannes.berg@intel.com> Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05mac80211: don't initiate TDLS connection if station is not associated to APBalaji Pothunoori
[ Upstream commit 7ed5285396c257fd4070b1e29e7b2341aae2a1ce ] Following call trace is observed while adding TDLS peer entry in driver during TDLS setup. Call Trace: [<c1301476>] dump_stack+0x47/0x61 [<c10537d2>] __warn+0xe2/0x100 [<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211] [<c1053895>] warn_slowpath_null+0x25/0x30 [<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211] [<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211] [<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211] [<c1876fe3>] nl80211_new_station+0x273/0x420 [<c170f6d9>] genl_rcv_msg+0x219/0x3c0 [<c170f4c0>] ? genl_rcv+0x30/0x30 [<c170ee7e>] netlink_rcv_skb+0x8e/0xb0 [<c170f4ac>] genl_rcv+0x1c/0x30 [<c170e8aa>] netlink_unicast+0x13a/0x1d0 [<c170ec18>] netlink_sendmsg+0x2d8/0x390 [<c16c5acd>] sock_sendmsg+0x2d/0x40 [<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0 Fixing this by allowing TDLS setup request only when we have completed association. Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05ibmveth: Do not process frames after calling napi_rescheduleThomas Falcon
[ Upstream commit e95d22c69b2c130ccce257b84daf283fd82d611e ] The IBM virtual ethernet driver's polling function continues to process frames after rescheduling NAPI, resulting in a warning if it exhausted its budget. Do not restart polling after calling napi_reschedule. Instead let frames be processed in the following instance. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05net: dev_is_mac_header_xmit() true for ARPHRD_RAWIPMaciej Żenczykowski
[ Upstream commit 3b707c3008cad04604c1f50e39f456621821c414 ] __bpf_redirect() and act_mirred checks this boolean to determine whether to prefix an ethernet header. Signed-off-by: Maciej Żenczykowski <maze@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05net: usb: asix: ax88772_bind return error when hw_reset failZhang Run
[ Upstream commit 6eea3527e68acc22483f4763c8682f223eb90029 ] The ax88772_bind() should return error code immediately when the PHY was not reset properly through ax88772a_hw_reset(). Otherwise, The asix_get_phyid() will block when get the PHY Identifier from the PHYSID1 MII registers through asix_mdio_read() due to the PHY isn't ready. Furthermore, it will produce a lot of error message cause system crash.As follows: asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to send software reset: ffffffb9 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable software MII access asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable software MII access asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -71 ... Signed-off-by: Zhang Run <zhang.run@zte.com.cn> Reviewed-by: Yang Wei <yang.wei9@zte.com.cn> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05hv_netvsc: Fix ethtool change hash key errorHaiyang Zhang
[ Upstream commit b4a10c750424e01b5e37372fef0a574ebf7b56c3 ] Hyper-V hosts require us to disable RSS before changing RSS key, otherwise the changing request will fail. This patch fixes the coding error. Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table") Reported-by: Wei Hu <weh@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> [sl: fix up subject line] Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05net: altera_tse: fix connect_local_phy error pathAtsushi Nemoto
[ Upstream commit 17b42a20d7ca59377788c6a2409e77569570cc10 ] The connect_local_phy should return NULL (not negative errno) on error, since its caller expects it. Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()Varun Prakash
[ Upstream commit fe35a40e675473eb65f2f5462b82770f324b5689 ] Assign fc_vport to ln->fc_vport before calling csio_fcoe_alloc_vnp() to avoid a NULL pointer dereference in csio_vport_set_state(). ln->fc_vport is dereferenced in csio_vport_set_state(). Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05writeback: synchronize sync(2) against cgroup writeback membership switchesTejun Heo
[ Upstream commit 7fc5854f8c6efae9e7624970ab49a1eac2faefb1 ] sync_inodes_sb() can race against cgwb (cgroup writeback) membership switches and fail to writeback some inodes. For example, if an inode switches to another wb while sync_inodes_sb() is in progress, the new wb might not be visible to bdi_split_work_to_wbs() at all or the inode might jump from a wb which hasn't issued writebacks yet to one which already has. This patch adds backing_dev_info->wb_switch_rwsem to synchronize cgwb switch path against sync_inodes_sb() so that sync_inodes_sb() is guaranteed to see all the target wbs and inodes can't jump wbs to escape syncing. v2: Fixed misplaced rwsem init. Spotted by Jiufei. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Jiufei Xue <xuejiufei@gmail.com> Link: http://lkml.kernel.org/r/dc694ae2-f07f-61e1-7097-7c8411cee12d@gmail.com Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05direct-io: allow direct writes to empty inodesErnesto A. Fernández
[ Upstream commit 8b9433eb4de3c26a9226c981c283f9f4896ae030 ] On a DIO_SKIP_HOLES filesystem, the ->get_block() method is currently not allowed to create blocks for an empty inode. This confusion comes from trying to bit shift a negative number, so check the size of the inode first. The problem is most visible for hfsplus, because the fallback to buffered I/O doesn't happen and the write fails with EIO. This is in part the fault of the module, because it gives a wrong return value on ->get_block(); that will be fixed in a separate patch. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05staging: android: ion: Support cpu access during dma_buf_detachLiam Mark
[ Upstream commit 31eb79db420a3f94c4c45a8c0a05cd30e333f981 ] Often userspace doesn't know when the kernel will be calling dma_buf_detach on the buffer. If userpace starts its CPU access at the same time as the sg list is being freed it could end up accessing the sg list after it has been freed. Thread A Thread B - DMA_BUF_IOCTL_SYNC IOCT - ion_dma_buf_begin_cpu_access - list_for_each_entry - ion_dma_buf_detatch - free_duped_table - dma_sync_sg_for_cpu Fix this by getting the ion_buffer lock before freeing the sg table memory. Fixes: 2a55e7b5e544 ("staging: android: ion: Call dma_map_sg for syncing and mapping") Signed-off-by: Liam Mark <lmark@codeaurora.org> Acked-by: Laura Abbott <labbott@redhat.com> Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05serial: fsl_lpuart: fix maximum acceptable baud rate with over-samplingTomonori Sakita
[ Upstream commit 815d835b7ba46685c316b000013367dacb2b461b ] Using over-sampling ratio, lpuart can accept baud rate upto uartclk / 4. Signed-off-by: Tomonori Sakita <tomonori.sakita@sord.co.jp> Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05drm/amd/powerplay: OD setting fix on Vega10Kenneth Feng
[ Upstream commit 6d87dc97eb3341de3f7b1efa3156cb0e014f4a96 ] gfxclk for OD setting is limited to 1980M for non-acg ASICs of Vega10 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05locking/rwsem: Fix (possible) missed wakeupXie Yongji
[ Upstream commit e158488be27b157802753a59b336142dc0eb0380 ] Because wake_q_add() can imply an immediate wakeup (cmpxchg failure case), we must not rely on the wakeup being delayed. However, commit: e38513905eea ("locking/rwsem: Rework zeroing reader waiter->task") relies on exactly that behaviour in that the wakeup must not happen until after we clear waiter->task. [ peterz: Added changelog. ] Signed-off-by: Xie Yongji <xieyongji@baidu.com> Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: e38513905eea ("locking/rwsem: Rework zeroing reader waiter->task") Link: https://lkml.kernel.org/r/1543495830-2644-1-git-send-email-xieyongji@baidu.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05futex: Fix (possible) missed wakeupPeter Zijlstra
[ Upstream commit b061c38bef43406df8e73c5be06cbfacad5ee6ad ] We must not rely on wake_q_add() to delay the wakeup; in particular commit: 1d0dcb3ad9d3 ("futex: Implement lockless wakeups") moved wake_q_add() before smp_store_release(&q->lock_ptr, NULL), which could result in futex_wait() waking before observing ->lock_ptr == NULL and going back to sleep again. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 1d0dcb3ad9d3 ("futex: Implement lockless wakeups") Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05sched/wait: Fix rcuwait_wake_up() orderingPrateek Sood
[ Upstream commit 6dc080eeb2ba01973bfff0d79844d7a59e12542e ] For some peculiar reason rcuwait_wake_up() has the right barrier in the comment, but not in the code. This mistake has been observed to cause a deadlock in the following situation: P1 P2 percpu_up_read() percpu_down_write() rcu_sync_is_idle() // false rcu_sync_enter() ... __percpu_up_read() [S] ,- __this_cpu_dec(*sem->read_count) | smp_rmb(); [L] | task = rcu_dereference(w->task) // NULL | | [S] w->task = current | smp_mb(); | [L] readers_active_check() // fail `-> <store happens here> Where the smp_rmb() (obviously) fails to constrain the store. [ peterz: Added changelog. ] Signed-off-by: Prateek Sood <prsood@codeaurora.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by: Davidlohr Bueso <dbueso@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 8f95c90ceb54 ("sched/wait, RCU: Introduce rcuwait machinery") Link: https://lkml.kernel.org/r/1543590656-7157-1-git-send-email-prsood@codeaurora.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05mac80211: fix miscounting of ttl-dropped framesBob Copeland
[ Upstream commit a0dc02039a2ee54fb4ae400e0b755ed30e73e58c ] In ieee80211_rx_h_mesh_fwding, we increment the 'dropped_frames_ttl' counter when we decrement the ttl to zero. For unicast frames destined for other hosts, we stop processing the frame at that point. For multicast frames, we do not rebroadcast it in this case, but we do pass the frame up the stack to process it on this STA. That doesn't match the usual definition of "dropped," so don't count those as such. With this change, something like `ping6 -i0.2 ff02::1%mesh0` from a peer in a ttl=1 network no longer increments the counter rapidly. Signed-off-by: Bob Copeland <bobcopeland@fb.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05staging: rtl8723bs: Fix build error with Clang when inlining is disabledNathan Chancellor
[ Upstream commit 97715058b70da1262fd07798c8b2e3e894f759dd ] When CONFIG_NO_AUTO_INLINE was present in linux-next (which added '-fno-inline-functions' to KBUILD_CFLAGS), an allyesconfig build with Clang failed at the modpost stage: ERROR: "is_broadcast_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined! ERROR: "is_zero_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined! ERROR: "is_multicast_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined! These functions were marked as extern inline, meaning that if inlining doesn't happen, the function will be undefined, as it is above. This happens to work with GCC because the '-fno-inline-functions' option respects the __inline attribute so all instances of these functions are inlined as expected and the definition doesn't actually matter. However, with Clang and '-fno-inline-functions', a function has to be marked with the __always_inline attribute to be considered for inlining, which none of these functions are. Clang tries to find the symbol definition elsewhere as it was told and fails, which trickles down to modpost. To make sure that this code compiles regardless of compiler and make the intention of the code clearer, use 'static' to ensure these functions are always defined, regardless of inlining. Additionally, silence a checkpatch warning by switching from '__inline' to 'inline'. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05drivers: thermal: int340x_thermal: Fix sysfs race conditionAaron Hill
[ Upstream commit 129699bb8c7572106b5bbb2407c2daee4727ccad ] Changes since V1: * Use dev_info instead of printk * Use dev_warn instead of BUG_ON Previously, sysfs_create_group was called before all initialization had fully run - specifically, before pci_set_drvdata was called. Since the sysctl group is visible to userspace as soon as sysfs_create_group returns, a small window of time existed during which a process could read from an uninitialized/partially-initialized device. This commit moves the creation of the sysctl group to after all initialized is completed. This ensures that it's impossible for userspace to read from a sysctl file before initialization has fully completed. To catch any future regressions, I've added a check to ensure that proc_thermal_emum_mode is never PROC_THERMAL_NONE when a process tries to read from a sysctl file. Previously, the aforementioned race condition could result in the 'else' branch running while PROC_THERMAL_NONE was set, leading to a null pointer deference. Signed-off-by: Aaron Hill <aa1ronham@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05ARC: fix __ffs return value to avoid build warningsEugeniy Paltsev
[ Upstream commit 4e868f8419cb4cb558c5d428e7ab5629cef864c7 ] | CC mm/nobootmem.o |In file included from ./include/asm-generic/bug.h:18:0, | from ./arch/arc/include/asm/bug.h:32, | from ./include/linux/bug.h:5, | from ./include/linux/mmdebug.h:5, | from ./include/linux/gfp.h:5, | from ./include/linux/slab.h:15, | from mm/nobootmem.c:14: |mm/nobootmem.c: In function '__free_pages_memory': |./include/linux/kernel.h:845:29: warning: comparison of distinct pointer types lacks a cast | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1))) | ^ |./include/linux/kernel.h:859:4: note: in expansion of macro '__typecheck' | (__typecheck(x, y) && __no_side_effects(x, y)) | ^~~~~~~~~~~ |./include/linux/kernel.h:869:24: note: in expansion of macro '__safe_cmp' | __builtin_choose_expr(__safe_cmp(x, y), \ | ^~~~~~~~~~ |./include/linux/kernel.h:878:19: note: in expansion of macro '__careful_cmp' | #define min(x, y) __careful_cmp(x, y, <) | ^~~~~~~~~~~~~ |mm/nobootmem.c:104:11: note: in expansion of macro 'min' | order = min(MAX_ORDER - 1UL, __ffs(start)); Change __ffs return value from 'int' to 'unsigned long' as it is done in other implementations (like asm-generic, x86, etc...) to avoid build-time warnings in places where type is strictly checked. As __ffs may return values in [0-31] interval changing return type to unsigned is valid. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05selftests: gpio-mockup-chardev: Check asprintf() for errorGeert Uytterhoeven
[ Upstream commit 508cacd7da6659ae7b7bdd0a335f675422277758 ] With gcc 7.3.0: gpio-mockup-chardev.c: In function ‘get_debugfs’: gpio-mockup-chardev.c:62:3: warning: ignoring return value of ‘asprintf’, declared with attribute warn_unused_result [-Wunused-result] asprintf(path, "%s/gpio", mnt_fs_get_target(fs)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Handle asprintf() failures to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shuah Khan <shuah@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05selftests: seccomp: use LDLIBS instead of LDFLAGSFathi Boudra
[ Upstream commit 5bbc73a841d7f0bbe025a342146dde462a796a5a ] seccomp_bpf fails to build due to undefined reference errors: aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey -O2 -pipe -g -feliminate-unused-debug-types -Wl,-no-as-needed -Wall -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lpthread seccomp_bpf.c -o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf /tmp/ccrlR3MW.o: In function `tsync_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1920: undefined reference to `sem_post' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1920: undefined reference to `sem_post' /tmp/ccrlR3MW.o: In function `TSYNC_setup': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1863: undefined reference to `sem_init' /tmp/ccrlR3MW.o: In function `TSYNC_teardown': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1904: undefined reference to `sem_destroy' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1897: undefined reference to `pthread_kill' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1898: undefined reference to `pthread_cancel' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1899: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /tmp/ccrlR3MW.o: In function `TSYNC_siblings_fail_prctl': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1978: undefined reference to `sem_wait' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1990: undefined reference to `pthread_join' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1992: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_ancestor': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2016: undefined reference to `sem_wait' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2032: undefined reference to `pthread_join' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2034: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /tmp/ccrlR3MW.o: In function `TSYNC_two_sibling_want_nnp': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2046: undefined reference to `sem_wait' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2058: undefined reference to `pthread_join' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2060: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_no_filter': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2073: undefined reference to `sem_wait' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2098: undefined reference to `pthread_join' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2100: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_one_divergence': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2125: undefined reference to `sem_wait' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2143: undefined reference to `pthread_join' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2145: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_not_under_filter': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2169: undefined reference to `sem_wait' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2202: undefined reference to `pthread_join' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2227: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' It's GNU Make and linker specific. The default Makefile rule looks like: $(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS) When linking is done by gcc itself, no issue, but when it needs to be passed to proper ld, only LDLIBS follows and then ld cannot know what libs to link with. More detail: https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html LDFLAGS Extra flags to give to compilers when they are supposed to invoke the linker, ‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable instead. LDLIBS Library flags or names given to compilers when they are supposed to invoke the linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS variable. https://lkml.org/lkml/2010/2/10/362 tools/perf: libraries must come after objects Link order matters, use LDLIBS instead of LDFLAGS to properly link against libpthread. Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <shuah@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05ASoC: imx-audmux: change snprintf to scnprintf for possible overflowSilvio Cesare
[ Upstream commit c407cd008fd039320d147088b52d0fa34ed3ddcb ] Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems. 1) Uses of size += snprintf(buf, SIZE - size, fmt, ...) In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf. 2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration. The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE. Signed-off-by: Silvio Cesare <silvio.cesare@gmail.com> Cc: Timur Tabi <timur@kernel.org> Cc: Nicolin Chen <nicoleotsuka@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Xiubo Li <Xiubo.Lee@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05ASoC: dapm: change snprintf to scnprintf for possible overflowSilvio Cesare
[ Upstream commit e581e151e965bf1f2815dd94620b638fec4d0a7e ] Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems. 1) Uses of size += snprintf(buf, SIZE - size, fmt, ...) In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf. 2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration. The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE. Signed-off-by: Silvio Cesare <silvio.cesare@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05genirq: Make sure the initial affinity is not emptySrinivas Ramana
[ Upstream commit bddda606ec76550dd63592e32a6e87e7d32583f7 ] If all CPUs in the irq_default_affinity mask are offline when an interrupt is initialized then irq_setup_affinity() can set an empty affinity mask for a newly allocated interrupt. Fix this by falling back to cpu_online_mask in case the resulting affinity mask is zero. Signed-off-by: Srinivas Ramana <sramana@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-msm@vger.kernel.org Link: https://lkml.kernel.org/r/1545312957-8504-1-git-send-email-sramana@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05usb: gadget: Potential NULL dereference on allocation errorDan Carpenter
[ Upstream commit df28169e1538e4a8bcd8b779b043e5aa6524545c ] The source_sink_alloc_func() function is supposed to return error pointers on error. The function is called from usb_get_function() which doesn't check for NULL returns so it would result in an Oops. Of course, in the current kernel, small allocations always succeed so this doesn't affect runtime. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05usb: dwc3: gadget: Fix the uninitialized link_state when udc startsZeng Tao
[ Upstream commit 88b1bb1f3b88e0bf20b05d543a53a5b99bd7ceb6 ] Currently the link_state is uninitialized and the default value is 0(U0) before the first time we start the udc, and after we start the udc then stop the udc, the link_state will be undefined. We may have the following warnings if we start the udc again with an undefined link_state: WARNING: CPU: 0 PID: 327 at drivers/usb/dwc3/gadget.c:294 dwc3_send_gadget_ep_cmd+0x304/0x308 dwc3 100e0000.hidwc3_0: wakeup failed --> -22 [...] Call Trace: [<c010f270>] (unwind_backtrace) from [<c010b3d8>] (show_stack+0x10/0x14) [<c010b3d8>] (show_stack) from [<c034a4dc>] (dump_stack+0x84/0x98) [<c034a4dc>] (dump_stack) from [<c0118000>] (__warn+0xe8/0x100) [<c0118000>] (__warn) from [<c0118050>](warn_slowpath_fmt+0x38/0x48) [<c0118050>] (warn_slowpath_fmt) from [<c0442ec0>](dwc3_send_gadget_ep_cmd+0x304/0x308) [<c0442ec0>] (dwc3_send_gadget_ep_cmd) from [<c0445e68>](dwc3_ep0_start_trans+0x48/0xf4) [<c0445e68>] (dwc3_ep0_start_trans) from [<c0446750>](dwc3_ep0_out_start+0x64/0x80) [<c0446750>] (dwc3_ep0_out_start) from [<c04451c0>](__dwc3_gadget_start+0x1e0/0x278) [<c04451c0>] (__dwc3_gadget_start) from [<c04452e0>](dwc3_gadget_start+0x88/0x10c) [<c04452e0>] (dwc3_gadget_start) from [<c045ee54>](udc_bind_to_driver+0x88/0xbc) [<c045ee54>] (udc_bind_to_driver) from [<c045f29c>](usb_gadget_probe_driver+0xf8/0x140) [<c045f29c>] (usb_gadget_probe_driver) from [<bf005424>](gadget_dev_desc_UDC_store+0xac/0xc4 [libcomposite]) [<bf005424>] (gadget_dev_desc_UDC_store [libcomposite]) from[<c023d8e0>] (configfs_write_file+0xd4/0x160) [<c023d8e0>] (configfs_write_file) from [<c01d51e8>] (__vfs_write+0x1c/0x114) [<c01d51e8>] (__vfs_write) from [<c01d5ff4>] (vfs_write+0xa4/0x168) [<c01d5ff4>] (vfs_write) from [<c01d6d40>] (SyS_write+0x3c/0x90) [<c01d6d40>] (SyS_write) from [<c0107400>] (ret_fast_syscall+0x0/0x3c) Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05usb: dwc3: gadget: synchronize_irq dwc irq in suspendBo He
[ Upstream commit 01c10880d24291a96a4ab0da773e3c5ce4d12da8 ] We see dwc3 endpoint stopped by unwanted irq during suspend resume test, which is caused dwc3 ep can't be started with error "No Resource". Here, add synchronize_irq before suspend to sync the pending IRQ handlers complete. Signed-off-by: Bo He <bo.he@intel.com> Signed-off-by: Yu Wang <yu.y.wang@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05thermal: int340x_thermal: Fix a NULL vs IS_ERR() checkDan Carpenter
[ Upstream commit 3fe931b31a4078395c1967f0495dcc9e5ec6b5e3 ] The intel_soc_dts_iosf_init() function doesn't return NULL, it returns error pointers. Fixes: 4d0dd6c1576b ("Thermal/int340x/processor_thermal: Enable auxiliary DTS for Braswell") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05clk: vc5: Abort clock configuration without upstream clockMarek Vasut
[ Upstream commit 2137a109a5e39c2bdccfffe65230ed3fadbaac0e ] In case the upstream clock are not set, which can happen in case the VC5 has no valid upstream clock, the $src variable is used uninited by regmap_update_bits(). Check for this condition and return -EINVAL in such case. Note that in case the VC5 has no valid upstream clock, the VC5 can not operate correctly. That is a hardware property of the VC5. The internal oscilator present in some VC5 models is also considered upstream clock. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Alexey Firago <alexey_firago@mentor.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-renesas-soc@vger.kernel.org [sboyd@kernel.org: Added comment about probe preventing this from happening in the first place] Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05ASoC: Variable "val" in function rt274_i2c_probe() could be uninitializedYizhuo
[ Upstream commit 8c3590de0a378c2449fc1aec127cc693632458e4 ] Inside function rt274_i2c_probe(), if regmap_read() function returns -EINVAL, then local variable "val" leaves uninitialized but used in if statement. This is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05ALSA: compress: prevent potential divide by zero bugsDan Carpenter
[ Upstream commit 678e2b44c8e3fec3afc7202f1996a4500a50be93 ] The problem is seen in the q6asm_dai_compr_set_params() function: ret = q6asm_map_memory_regions(dir, prtd->audio_client, prtd->phys, (prtd->pcm_size / prtd->periods), ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ prtd->periods); In this code prtd->pcm_size is the buffer_size and prtd->periods comes from params->buffer.fragments. If we allow the number of fragments to be zero then it results in a divide by zero bug. One possible fix would be to use prtd->pcm_count directly instead of using the division to re-calculate it. But I decided that it doesn't really make sense to allow zero fragments. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05ASoC: Intel: Haswell/Broadwell: fix setting for .dynamic fieldRander Wang
[ Upstream commit 906a9abc5de73c383af518f5a806f4be2993a0c7 ] For some reason this field was set to zero when all other drivers use .dynamic = 1 for front-ends. This change was tested on Dell XPS13 and has no impact with the existing legacy driver. The SOF driver also works with this change which enables it to override the fixed topology. Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05drm/msm: Unblock writer if reader closes fileKristian H. Kristensen
[ Upstream commit 99c66bc051e7407fe0bf0607b142ec0be1a1d1dd ] Prevents deadlock when fifo is full and reader closes file. Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05scsi: libsas: Fix rphy phy_identifier for PHYs with end devices attachedJohn Garry
commit ffeafdd2bf0b280d67ec1a47ea6287910d271f3f upstream. The sysfs phy_identifier attribute for a sas_end_device comes from the rphy phy_identifier value. Currently this is not being set for rphys with an end device attached, so we see incorrect symlinks from systemd disk/by-path: root@localhost:~# ls -l /dev/disk/by-path/ total 0 lrwxrwxrwx 1 root root 9 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0 -> ../../sdb lrwxrwxrwx 1 root root 10 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 10 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0-part2 -> ../../sdb2 lrwxrwxrwx 1 root root 10 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0-part3 -> ../../sdc3 Indeed, each sas_end_device phy_identifier value is 0: root@localhost:/# more sys/class/sas_device/end_device-0\:0\:2/phy_identifier 0 root@localhost:/# more sys/class/sas_device/end_device-0\:0\:10/phy_identifier 0 This patch fixes the discovery code to set the phy_identifier. With this, we now get proper symlinks: root@localhost:~# ls -l /dev/disk/by-path/ total 0 lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy10-lun-0 -> ../../sdg lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy11-lun-0 -> ../../sdh lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy2-lun-0 -> ../../sda lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy2-lun-0-part1 -> ../../sda1 lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy3-lun-0 -> ../../sdb lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy3-lun-0-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy3-lun-0-part2 -> ../../sdb2 lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0 -> ../../sdc lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0-part1 -> ../../sdc1 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0-part2 -> ../../sdc2 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0-part3 -> ../../sdc3 lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy5-lun-0 -> ../../sdd lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0 -> ../../sde lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0-part1 -> ../../sde1 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0-part2 -> ../../sde2 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0-part3 -> ../../sde3 lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0 -> ../../sdf lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0-part1 -> ../../sdf1 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0-part2 -> ../../sdf2 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0-part3 -> ../../sdf3 Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Reported-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Tested-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05net: stmmac: Disable ACS Feature for GMAC >= 4Jose Abreu
commit 565020aaeebfa7c8b3ec077bee38f4c15acc9905 upstream. ACS Feature is currently enabled for GMAC >= 4 but the llc_snap status is never checked in descriptor rx_status callback. This will cause stmmac to always strip packets even that ACS feature is already stripping them. Lets be safe and disable the ACS feature for GMAC >= 4 and always strip the packets for this GMAC version. Fixes: 477286b53f55 ("stmmac: add GMAC4 core support") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05net: stmmac: Fix reception of Broadcom switches tagsFlorian Fainelli
commit 8cad443eacf661796a740903a75cb8944c675b4e upstream. Broadcom tags inserted by Broadcom switches put a 4 byte header after the MAC SA and before the EtherType, which may look like some sort of 0 length LLC/SNAP packet (tcpdump and wireshark do think that way). With ACS enabled in stmmac the packets were truncated to 8 bytes on reception, whereas clearing this bit allowed normal reception to occur. In order to make that possible, we need to pass a net_device argument to the different core_init() functions and we are dependent on the Broadcom tagger padding packets correctly (which it now does). To be as little invasive as possible, this is only done for gmac1000 when the network device is DSA-enabled (netdev_uses_dsa() returns true). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-24 13:19:10 +0000