summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-08-03Merge tag 'cxl-fixes-6.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull cxl fixes from Vishal Verma: - Fixup the Sanitixe device ABI that was merged for v6.5 to hide some sysfs files when the necessary support is missing. Update the ABI documentation around this as well. * tag 'cxl-fixes-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/memdev: Only show sanitize sysfs files when supported cxl/memdev: Document security state in kern-doc cxl/memdev: Improve sanitize ABI descriptions
2023-08-03Merge tag 'net-6.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and wireless. Nothing scary here. Feels like the first wave of regressions from v6.5 is addressed - one outstanding fix still to come in TLS for the sendpage rework. Current release - regressions: - udp: fix __ip_append_data()'s handling of MSG_SPLICE_PAGES - dsa: fix older DSA drivers using phylink Previous releases - regressions: - gro: fix misuse of CB in udp socket lookup - mlx5: unregister devlink params in case interface is down - Revert "wifi: ath11k: Enable threaded NAPI" Previous releases - always broken: - sched: cls_u32: fix match key mis-addressing - sched: bind logic fixes for cls_fw, cls_u32 and cls_route - add bound checks to a number of places which hand-parse netlink - bpf: disable preemption in perf_event_output helpers code - qed: fix scheduling in a tasklet while getting stats - avoid using APIs which are not hardirq-safe in couple of drivers, when we may be in a hard IRQ (netconsole) - wifi: cfg80211: fix return value in scan logic, avoid page allocator warning - wifi: mt76: mt7615: do not advertise 5 GHz on first PHY of MT7615D (DBDC) Misc: - drop handful of inactive maintainers, put some new in place" * tag 'net-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (98 commits) MAINTAINERS: update TUN/TAP maintainers test/vsock: remove vsock_perf executable on `make clean` tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen tcp_metrics: annotate data-races around tm->tcpm_net tcp_metrics: annotate data-races around tm->tcpm_vals[] tcp_metrics: annotate data-races around tm->tcpm_lock tcp_metrics: annotate data-races around tm->tcpm_stamp tcp_metrics: fix addr_same() helper prestera: fix fallback to previous version on same major version udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES net/mlx5e: Set proper IPsec source port in L4 selector net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio net/mlx5: fs_core: Make find_closest_ft more generic wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1() vxlan: Fix nexthop hash size ip6mr: Fix skb_under_panic in ip6mr_cache_report() s390/qeth: Don't call dev_close/dev_open (DOWN/UP) net: tap_open(): set sk_uid from current_fsuid() net: tun_chr_open(): set sk_uid from current_fsuid() net: dcb: choose correct policy to parse DCB_ATTR_BCN ...
2023-08-03MAINTAINERS: update TUN/TAP maintainersJakub Kicinski
Willem and Jason have agreed to take over the maintainer duties for TUN/TAP, thank you! There's an existing entry for TUN/TAP which only covers the user mode Linux implementation. Since we haven't heard from Maxim on the list for almost a decade, extend that entry and take it over, rather than adding a new one. Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20230802182843.4193099-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Martin KaFai Lau says: ==================== pull-request: bpf 2023-08-03 We've added 5 non-merge commits during the last 7 day(s) which contain a total of 3 files changed, 37 insertions(+), 20 deletions(-). The main changes are: 1) Disable preemption in perf_event_output helpers code, from Jiri Olsa 2) Add length check for SK_DIAG_BPF_STORAGE_REQ_MAP_FD parsing, from Lin Ma 3) Multiple warning splat fixes in cpumap from Hou Tao * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, cpumap: Handle skb as well when clean up ptr_ring bpf, cpumap: Make sure kthread is running before map update returns bpf: Add length check for SK_DIAG_BPF_STORAGE_REQ_MAP_FD parsing bpf: Disable preemption in bpf_event_output bpf: Disable preemption in bpf_perf_event_output ==================== Link: https://lore.kernel.org/r/20230803181429.994607-1-martin.lau@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03Merge tag 'wireless-2023-08-03' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.5 We did some house cleaning in MAINTAINERS file so several patches about that. Few regressions fixed and also fix some recently enabled memcpy() warnings. Only small commits and nothing special standing out. * tag 'wireless-2023-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1() wifi: ray_cs: Replace 1-element array with flexible array MAINTAINERS: add Jeff as ath10k, ath11k and ath12k maintainer MAINTAINERS: wifi: mark mlw8k as orphan MAINTAINERS: wifi: mark b43 as orphan MAINTAINERS: wifi: mark zd1211rw as orphan MAINTAINERS: wifi: mark wl3501 as orphan MAINTAINERS: wifi: mark rndis_wlan as orphan MAINTAINERS: wifi: mark ar5523 as orphan MAINTAINERS: wifi: mark cw1200 as orphan MAINTAINERS: wifi: atmel: mark as orphan MAINTAINERS: wifi: rtw88: change Ping as the maintainer Revert "wifi: ath6k: silence false positive -Wno-dangling-pointer warning on GCC 12" wifi: cfg80211: Fix return value in scan logic Revert "wifi: ath11k: Enable threaded NAPI" MAINTAINERS: Update mwifiex maintainer list wifi: mt76: mt7615: do not advertise 5 GHz on first phy of MT7615D (DBDC) ==================== Link: https://lore.kernel.org/r/20230803140058.57476C433C9@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03test/vsock: remove vsock_perf executable on `make clean`Stefano Garzarella
We forgot to add vsock_perf to the rm command in the `clean` target, so now we have a left over after `make clean` in tools/testing/vsock. Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility") Cc: AVKrasnov@sberdevices.ru Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Link: https://lore.kernel.org/r/20230803085454.30897-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03Merge branch 'tcp_metrics-series-of-fixes'Jakub Kicinski
Eric Dumazet says: ==================== tcp_metrics: series of fixes This series contains a fix for addr_same() and various data-race annotations. We still have to address races over tm->tcpm_saddr and tm->tcpm_daddr later. ==================== Link: https://lore.kernel.org/r/20230802131500.1478140-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopenEric Dumazet
Whenever tcpm_new() reclaims an old entry, tcpm_suck_dst() would overwrite data that could be read from tcp_fastopen_cache_get() or tcp_metrics_fill_info(). We need to acquire fastopen_seqlock to maintain consistency. For newly allocated objects, tcpm_new() can switch to kzalloc() to avoid an extra fastopen_seqlock acquisition. Fixes: 1fe4c481ba63 ("net-tcp: Fast Open client - cookie cache") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230802131500.1478140-7-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03tcp_metrics: annotate data-races around tm->tcpm_netEric Dumazet
tm->tcpm_net can be read or written locklessly. Instead of changing write_pnet() and read_pnet() and potentially hurt performance, add the needed READ_ONCE()/WRITE_ONCE() in tm_net() and tcpm_new(). Fixes: 849e8a0ca8d5 ("tcp_metrics: Add a field tcpm_net and verify it matches on lookup") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230802131500.1478140-6-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03tcp_metrics: annotate data-races around tm->tcpm_vals[]Eric Dumazet
tm->tcpm_vals[] values can be read or written locklessly. Add needed READ_ONCE()/WRITE_ONCE() to document this, and force use of tcp_metric_get() and tcp_metric_set() Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03tcp_metrics: annotate data-races around tm->tcpm_lockEric Dumazet
tm->tcpm_lock can be read or written locklessly. Add needed READ_ONCE()/WRITE_ONCE() to document this. Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230802131500.1478140-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03tcp_metrics: annotate data-races around tm->tcpm_stampEric Dumazet
tm->tcpm_stamp can be read or written locklessly. Add needed READ_ONCE()/WRITE_ONCE() to document this. Also constify tcpm_check_stamp() dst argument. Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230802131500.1478140-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03tcp_metrics: fix addr_same() helperEric Dumazet
Because v4 and v6 families use separate inetpeer trees (respectively net->ipv4.peers and net->ipv6.peers), inetpeer_addr_cmp(a, b) assumes a & b share the same family. tcp_metrics use a common hash table, where entries can have different families. We must therefore make sure to not call inetpeer_addr_cmp() if the families do not match. Fixes: d39d14ffa24c ("net: Add helper function to compare inetpeer addresses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230802131500.1478140-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03prestera: fix fallback to previous version on same major versionJonas Gorski
When both supported and previous version have the same major version, and the firmwares are missing, the driver ends in a loop requesting the same (previous) version over and over again: [ 76.327413] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.1.img firmware, fall-back to previous 4.0 version [ 76.339802] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version [ 76.352162] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version [ 76.364502] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version [ 76.376848] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version [ 76.389183] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version [ 76.401522] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version [ 76.413860] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version [ 76.426199] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version ... Fix this by inverting the check to that we aren't yet at the previous version, and also check the minor version. This also catches the case where both versions are the same, as it was after commit bb5dbf2cc64d ("net: marvell: prestera: add firmware v4.0 support"). With this fix applied: [ 88.499622] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.1.img firmware, fall-back to previous 4.0 version [ 88.511995] Prestera DX 0000:01:00.0: failed to request previous firmware: mrvl/prestera/mvsw_prestera_fw-v4.0.img [ 88.522403] Prestera DX: probe of 0000:01:00.0 failed with error -2 Fixes: 47f26018a414 ("net: marvell: prestera: try to load previous fw version") Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de> Acked-by: Elad Nachman <enachman@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Taras Chornyi <taras.chornyi@plvision.eu> Link: https://lore.kernel.org/r/20230802092357.163944-1-jonas.gorski@bisdn.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03Merge tag 'nfsd-6.5-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fix from Chuck Lever: - Fix tmpfs splice read support * tag 'nfsd-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: Fix reading via splice
2023-08-03Merge tag 'erofs-for-6.5-rc5-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fixes from Gao Xiang: - Fix data corruption caused by insufficient decompression on deduplicated compressed extents - Drop a useless s_magic checking in erofs_kill_sb() * tag 'erofs-for-6.5-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: drop unnecessary WARN_ON() in erofs_kill_sb() erofs: fix wrong primary bvec selection on deduplicated extents
2023-08-03Merge tag 's390-6.5-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - Split kernel large page mappings into 4k mappings in case debug pagealloc is enabled again. This got accidentally removed by commit bb1520d581a3 ("s390/mm: start kernel with DAT enabled") - Fix error handling in KVM's sthyi handling - Add missing include to s390's uapi ptrace.h - Update defconfigs * tag 's390-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ptrace: add missing linux/const.h include KVM: s390: fix sthyi error handling s390: update defconfigs s390/vmem: split pages when debug pagealloc is enabled
2023-08-03arm64/ptrace: Flush FP state when setting ZT0Mark Brown
When setting ZT0 via ptrace we do not currently force a reload of the floating point register state from memory, do that to ensure that the newly set value gets loaded into the registers on next task execution. The function was templated off the function for FPSIMD which due to our providing the option of embedding a FPSIMD regset within the SVE regset does not directly include the flush. Fixes: f90b529bcbe5 ("arm64/sme: Implement ZT0 ptrace support") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-zt0-flush-v1-1-72e854eaf96e@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-08-03arm64/fpsimd: Clear SME state in the target task when setting the VLMark Brown
When setting SME vector lengths we clear TIF_SME to reenable SME traps, doing a reallocation of the backing storage on next use. We do this using clear_thread_flag() which operates on the current thread, meaning that when setting the vector length via ptrace we may both not force traps for the target task and force a spurious flush of any SME state that the tracing task may have. Clear the flag in the target task. Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers") Reported-by: David Spickett <David.Spickett@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-tif-sme-v1-1-88312fd6fbfd@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-08-03parisc: unaligned: Add required spaces after ','hanyu001@208suo.com
Fix checkpatch warnings: unaligned.c:475: ERROR: space required after that ',' Signed-off-by: Yu Han <hanyu001@208suo.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-03parport: gsc: remove DMA leftover codeArnd Bergmann
This driver does not actually work with DMA mode, but still tries to call ISA DMA interface functions that are stubbed out on parisc, resulting in a W=1 build warning: drivers/parport/parport_gsc.c: In function 'parport_remove_chip': drivers/parport/parport_gsc.c:389:20: warning: suggest braces around empty body in an 'if' statement [-Wempty-body] 389 | free_dma(p->dma); Remove the corresponding code as a prerequisite for turning on -Wempty-body by default in all kernels. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-03parisc: pci-dma: remove unused and dead EISA code and commentPetr Tesarik
Clearly, this code isn't needed, but it gives a false positive when grepping the complete source tree for coherent_dma_mask. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-03parisc/mm: preallocate fixmap page tables at initMike Rapoport (IBM)
Christoph Biedl reported early OOM on recent kernels: swapper: page allocation failure: order:0, mode:0x100(__GFP_ZERO), nodemask=(null) CPU: 0 PID: 0 Comm: swapper Not tainted 6.3.0-rc4+ #16 Hardware name: 9000/785/C3600 Backtrace: [<10408594>] show_stack+0x48/0x5c [<10e152d8>] dump_stack_lvl+0x48/0x64 [<10e15318>] dump_stack+0x24/0x34 [<105cf7f8>] warn_alloc+0x10c/0x1c8 [<105d068c>] __alloc_pages+0xbbc/0xcf8 [<105d0e4c>] __get_free_pages+0x28/0x78 [<105ad10c>] __pte_alloc_kernel+0x30/0x98 [<10406934>] set_fixmap+0xec/0xf4 [<10411ad4>] patch_map.constprop.0+0xa8/0xdc [<10411bb0>] __patch_text_multiple+0xa8/0x208 [<10411d78>] patch_text+0x30/0x48 [<1041246c>] arch_jump_label_transform+0x90/0xcc [<1056f734>] jump_label_update+0xd4/0x184 [<1056fc9c>] static_key_enable_cpuslocked+0xc0/0x110 [<1056fd08>] static_key_enable+0x1c/0x2c [<1011362c>] init_mem_debugging_and_hardening+0xdc/0xf8 [<1010141c>] start_kernel+0x5f0/0xa98 [<10105da8>] start_parisc+0xb8/0xe4 Mem-Info: active_anon:0 inactive_anon:0 isolated_anon:0 active_file:0 inactive_file:0 isolated_file:0 unevictable:0 dirty:0 writeback:0 slab_reclaimable:0 slab_unreclaimable:0 mapped:0 shmem:0 pagetables:0 sec_pagetables:0 bounce:0 kernel_misc_reclaimable:0 free:0 free_pcp:0 free_cma:0 Node 0 active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:0kB dirty:0kB writeback:0kB shmem:0kB +writeback_tmp:0kB kernel_stack:0kB pagetables:0kB sec_pagetables:0kB all_unreclaimable? no Normal free:0kB boost:0kB min:0kB low:0kB high:0kB reserved_highatomic:0KB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB +present:1048576kB managed:1039360kB mlocked:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 0 Normal: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB 0 total pagecache pages 0 pages in swap cache Free swap = 0kB Total swap = 0kB 262144 pages RAM 0 pages HighMem/MovableOnly 2304 pages reserved Backtrace: [<10411d78>] patch_text+0x30/0x48 [<1041246c>] arch_jump_label_transform+0x90/0xcc [<1056f734>] jump_label_update+0xd4/0x184 [<1056fc9c>] static_key_enable_cpuslocked+0xc0/0x110 [<1056fd08>] static_key_enable+0x1c/0x2c [<1011362c>] init_mem_debugging_and_hardening+0xdc/0xf8 [<1010141c>] start_kernel+0x5f0/0xa98 [<10105da8>] start_parisc+0xb8/0xe4 Kernel Fault: Code=15 (Data TLB miss fault) at addr 0f7fe3c0 CPU: 0 PID: 0 Comm: swapper Not tainted 6.3.0-rc4+ #16 Hardware name: 9000/785/C3600 This happens because patching static key code temporarily maps it via fixmap and if it happens before page allocator is initialized set_fixmap() cannot allocate memory using pte_alloc_kernel(). Make sure that fixmap page tables are preallocated early so that pte_offset_kernel() in set_fixmap() never resorts to pte allocation. Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Helge Deller <deller@gmx.de> Tested-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Tested-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> # v6.4+
2023-08-02udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGESDavid Howells
__ip_append_data() can get into an infinite loop when asked to splice into a partially-built UDP message that has more than the frag-limit data and up to the MTU limit. Something like: pipe(pfd); sfd = socket(AF_INET, SOCK_DGRAM, 0); connect(sfd, ...); send(sfd, buffer, 8161, MSG_CONFIRM|MSG_MORE); write(pfd[1], buffer, 8); splice(pfd[0], 0, sfd, 0, 0x4ffe0ul, 0); where the amount of data given to send() is dependent on the MTU size (in this instance an interface with an MTU of 8192). The problem is that the calculation of the amount to copy in __ip_append_data() goes negative in two places, and, in the second place, this gets subtracted from the length remaining, thereby increasing it. This happens when pagedlen > 0 (which happens for MSG_ZEROCOPY and MSG_SPLICE_PAGES), because the terms in: copy = datalen - transhdrlen - fraggap - pagedlen; then mostly cancel when pagedlen is substituted for, leaving just -fraggap. This causes: length -= copy + transhdrlen; to increase the length to more than the amount of data in msg->msg_iter, which causes skb_splice_from_iter() to be unable to fill the request and it returns less than 'copied' - which means that length never gets to 0 and we never exit the loop. Fix this by: (1) Insert a note about the dodgy calculation of 'copy'. (2) If MSG_SPLICE_PAGES, clear copy if it is negative from the above equation, so that 'offset' isn't regressed and 'length' isn't increased, which will mean that length and thus copy should match the amount left in the iterator. (3) When handling MSG_SPLICE_PAGES, give a warning and return -EIO if we're asked to splice more than is in the iterator. It might be better to not give the warning or even just give a 'short' write. [!] Note that this ought to also affect MSG_ZEROCOPY, but MSG_ZEROCOPY avoids the problem by simply assuming that everything asked for got copied, not just the amount that was in the iterator. This is a potential bug for the future. Fixes: 7ac7c987850c ("udp: Convert udp_sendpage() to use MSG_SPLICE_PAGES") Reported-by: syzbot+f527b971b4bdc8e79f9e@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/000000000000881d0606004541d1@google.com/ Signed-off-by: David Howells <dhowells@redhat.com> cc: David Ahern <dsahern@kernel.org> cc: Jens Axboe <axboe@kernel.dk> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/1420063.1690904933@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02Merge branch 'mlx5-ipsec-fixes'Jakub Kicinski
Leon Romanovsky says: ==================== mlx5 IPsec fixes The following patches are combination of Jianbo's work on IPsec eswitch mode together with our internal review toward addition of TCP protocol selectors support to IPSec packet offload. Despite not-being fix, the first patch helps us to make second one more clear, so I'm asking to apply it anyway as part of this series. ==================== Link: https://lore.kernel.org/r/cover.1690803944.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02net/mlx5e: Set proper IPsec source port in L4 selectorLeon Romanovsky
Fix typo in setup_fte_upper_proto_match() where destination UDP port was used instead of source port. Fixes: a7385187a386 ("net/mlx5e: IPsec, support upper protocol selector field offload") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/ffc024a4d192113103f392b0502688366ca88c1f.1690803944.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prioJianbo Liu
In the cited commit, new type of FS_TYPE_PRIO_CHAINS fs_prio was added to support multiple parallel namespaces for multi-chains. And we skip all the flow tables under the fs_node of this type unconditionally, when searching for the next or previous flow table to connect for a new table. As this search function is also used for find new root table when the old one is being deleted, it will skip the entire FS_TYPE_PRIO_CHAINS fs_node next to the old root. However, new root table should be chosen from it if there is any table in it. Fix it by skipping only the flow tables in the same FS_TYPE_PRIO_CHAINS fs_node when finding the closest FT for a fs_node. Besides, complete the connecting from FTs of previous priority of prio because there should be multiple prevs after this fs_prio type is introduced. And also the next FT should be chosen from the first flow table next to the prio in the same FS_TYPE_PRIO_CHAINS fs_prio, if this prio is the first child. Fixes: 328edb499f99 ("net/mlx5: Split FDB fast path prio to multiple namespaces") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/7a95754df479e722038996c97c97b062b372591f.1690803944.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02net/mlx5: fs_core: Make find_closest_ft more genericJianbo Liu
As find_closest_ft_recursive is called to find the closest FT, the first parameter of find_closest_ft can be changed from fs_prio to fs_node. Thus this function is extended to find the closest FT for the nodes of any type, not only prios, but also the sub namespaces. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/d3962c2b443ec8dde7a740dc742a1f052d5e256c.1690803944.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02Merge tag 'soc-fixes-6.5-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A couple of platforms get a lone dts fix each: - SoCFPGA: Fix incorrect I2C property for SCL signal - Renesas: Fix interrupt names for MTU3 channels on RZ/G2L and RZ/V2L. - Juno/Vexpress: remove a dangling symlink - at91: sam9x60 SoC detection compatible strings - nspire: Fix arm primecell compatible string On the NXP i.MX platform, there multiple issues that get addressed: - A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU frequency of sk-imx53 board - Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux - A couple of imx8mm-venice fixes from Tim Harvey to diable disp_blk_ctrl - A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct VPU label and gpio-line-names - Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as bus_power_dev child, so that runtime PM can translate into the necessary GPC power domain action On the driver side, there are two fixes for tegra memory controller drivers addressing regressions from the merge window, a couple of minor correctness fixes for SCMI and SMCCC firmware, as well as a build fix for an lcd backlight driver" * tag 'soc-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits) backlight: corgi_lcd: fix missing prototype memory: tegra: make icc_set_bw return zero if BWMGR not supported arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels dt-bindings: serial: atmel,at91-usart: update compatible for sam9x60 ARM: dts: at91: sam9x60: fix the SOC detection ARM: dts: nspire: Fix arm primecell compatible string firmware: arm_scmi: Fix chan_free cleanup on SMC firmware: arm_scmi: Drop OF node reference in the transport channel setup soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child ARM: dts: nxp/imx: limit sk-imx53 supported frequencies firmware: arm_scmi: Fix signed error return values handling firmware: smccc: Fix use of uninitialised results structure arm64: dts: freescale: Fix VPU G2 clock arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux arm64: dts: phycore-imx8mm: Correction in gpio-line-names arm64: dts: phycore-imx8mm: Label typo-fix of VPU ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl arm64: dts: arm: Remove the dangling vexpress-v2m-rs1.dtsi symlink ...
2023-08-02Merge tag 'bitmap-6.5-rc5' of https://github.com:/norov/linuxLinus Torvalds
Pull bitmap fixes from Yury Norov: - Fix for bitmap documentation - Fix for kernel build under certain configurations * tag 'bitmap-6.5-rc5' of https://github.com:/norov/linux: lib/bitmap: workaround const_eval test build failure cpumask: eliminate kernel-doc warnings
2023-08-02Drivers: hv: vmbus: Remove unused extern declaration vmbus_ontimer()YueHaibing
Since commit 30fbee49b071 ("Staging: hv: vmbus: Get rid of the unused function vmbus_ontimer()") this is not used anymore, so can remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20230725142108.27280-1-yuehaibing@huawei.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-08-02x86/hyperv: add noop functions to x86_init mpparse functionsSaurabh Sengar
Hyper-V can run VMs at different privilege "levels" known as Virtual Trust Levels (VTL). Sometimes, it chooses to run two different VMs at different levels but they share some of their address space. In such setups VTL2 (higher level VM) has visibility of all of the VTL0 (level 0) memory space. When the CONFIG_X86_MPPARSE is enabled for VTL2, the VTL2 kernel performs a search within the low memory to locate MP tables. However, in systems where VTL0 manages the low memory and may contain valid tables, this scanning can result in incorrect MP table information being provided to the VTL2 kernel, mistakenly considering VTL0's MP table as its own Add noop functions to avoid MP parse scan by VTL2. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/r/1687537688-5397-1-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-08-02Documentation: kdump: Add va_kernel_pa_offset for RISCV64Song Shuai
RISC-V Linux exports "va_kernel_pa_offset" in vmcoreinfo to help Crash-utility translate the kernel virtual address correctly. Here adds the definition of "va_kernel_pa_offset". Fixes: 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping") Link: https://lore.kernel.org/linux-riscv/20230724040649.220279-1-suagrfillet@gmail.com/ Signed-off-by: Song Shuai <suagrfillet@gmail.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230724100917.309061-2-suagrfillet@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-02riscv: Export va_kernel_pa_offset in vmcoreinfoSong Shuai
Since RISC-V Linux v6.4, the commit 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping") changes phys_ram_base from the physical start of the kernel to the actual start of the DRAM. The Crash-utility's VTOP() still uses phys_ram_base and kernel_map.virt_addr to translate kernel virtual address, that failed the Crash with Linux v6.4 [1]. Export kernel_map.va_kernel_pa_offset in vmcoreinfo to help Crash translate the kernel virtual address correctly. Fixes: 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping") Link: https://lore.kernel.org/linux-riscv/20230724040649.220279-1-suagrfillet@gmail.com/ [1] Signed-off-by: Song Shuai <suagrfillet@gmail.com> Reviewed-by: Xianting Tian  <xianting.tian@linux.alibaba.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230724100917.309061-1-suagrfillet@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-02RISC-V: ACPI: Fix acpi_os_ioremap to return iomem addressSunil V L
acpi_os_ioremap() currently is a wrapper to memremap() on RISC-V. But the callers of acpi_os_ioremap() expect it to return __iomem address and hence sparse tool reports a new warning. Fix this issue by type casting to __iomem type. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202307230357.egcTAefj-lkp@intel.com/ Fixes: a91a9ffbd3a5 ("RISC-V: Add support to build the ACPI core") Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230724100346.1302937-1-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-02selftests: riscv: Fix compilation error with vstate_exec_nolibc.cAlexandre Ghiti
The following error happens: In file included from vstate_exec_nolibc.c:2: /usr/include/riscv64-linux-gnu/sys/prctl.h:42:12: error: conflicting types for ‘prctl’; h ave ‘int(int, ...)’ 42 | extern int prctl (int __option, ...) __THROW; | ^~~~~ In file included from ./../../../../include/nolibc/nolibc.h:99, from <command-line>: ./../../../../include/nolibc/sys.h:892:5: note: previous definition of ‘prctl’ with type ‘int(int, long unsigned int, long unsigned int, long unsigned int, long unsigned int) ’ 892 | int prctl(int option, unsigned long arg2, unsigned long arg3, | ^~~~~ Fix this by not including <sys/prctl.h>, which is not needed here since prctl syscall is directly called using its number. Fixes: 7cf6198ce22d ("selftests: Test RISC-V Vector prctl interface") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230713115829.110421-1-alexghiti@rivosinc.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-02selftests/riscv: fix potential build failure during the "emit_tests" stepJohn Hubbard
The riscv selftests (which were modeled after the arm64 selftests) are improperly declaring the "emit_tests" target to depend upon the "all" target. This approach, when combined with commit 9fc96c7c19df ("selftests: error out if kernel header files are not yet built"), has caused build failures [1] on arm64, and is likely to cause similar failures for riscv. To fix this, simply remove the unnecessary "all" dependency from the emit_tests target. The dependency is still effectively honored, because again, invocation is via "install", which also depends upon "all". An alternative approach would be to harden the emit_tests target so that it can depend upon "all", but that's a lot more complicated and hard to get right, and doesn't seem worth it, especially given that emit_tests should probably not be overridden at all. [1] https://lore.kernel.org/20230710-kselftest-fix-arm64-v1-1-48e872844f25@kernel.org Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230712193514.740033-1-jhubbard@nvidia.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-02Merge tag 'exfat-for-6.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat Pull exfat fixes from Namjae Jeon: - Fix page allocation failure from allocation bitmap by using kvmalloc_array/kvfree - Add the check to validate if filename entries exceeds max filename length - Fix potential deadlock condition from dir_emit*() * tag 'exfat-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: release s_lock before calling dir_emit() exfat: check if filename entries exceeds max filename length exfat: use kvmalloc_array/kvfree instead of kmalloc_array/kfree
2023-08-02smb: client: fix dfs link mount against w2k8Paulo Alcantara
Customer reported that they couldn't mount their DFS link that was seen by the client as a DFS interlink -- special form of DFS link where its single target may point to a different DFS namespace -- and it turned out that it was just a regular DFS link where its referral header flags missed the StorageServers bit thus making the client think it couldn't tree connect to target directly without requiring further referrals. When the DFS link referral header flags misses the StoraServers bit and its target doesn't respond to any referrals, then tree connect to it. Fixes: a1c0d00572fc ("cifs: share dfs connections and supers") Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-08-02Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three small fixes, all in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: pm80xx: Fix error return code in pm8001_pci_probe() scsi: zfcp: Defer fc_rport blocking until after ADISC response scsi: storvsc: Limit max_sectors for virtual Fibre Channel devices
2023-08-02word-at-a-time: use the same return type for has_zero regardless of endiannessndesaulniers@google.com
Compiling big-endian targets with Clang produces the diagnostic: fs/namei.c:2173:13: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] } while (!(has_zero(a, &adata, &constants) | has_zero(b, &bdata, &constants))); ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ || fs/namei.c:2173:13: note: cast one or both operands to int to silence this warning It appears that when has_zero was introduced, two definitions were produced with different signatures (in particular different return types). Looking at the usage in hash_name() in fs/namei.c, I suspect that has_zero() is meant to be invoked twice per while loop iteration; using logical-or would not update `bdata` when `a` did not have zeros. So I think it's preferred to always return an unsigned long rather than a bool than update the while loop in hash_name() to use a logical-or rather than bitwise-or. [ Also changed powerpc version to do the same - Linus ] Link: https://github.com/ClangBuiltLinux/linux/issues/1832 Link: https://lore.kernel.org/lkml/20230801-bitwise-v1-1-799bec468dc4@google.com/ Fixes: 36126f8f2ed8 ("word-at-a-time: make the interfaces truly generic") Debugged-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-08-02powerpc/powermac: Use early_* IO variants in via_calibrate_decr()Benjamin Gray
On a powermac platform, via the call path: start_kernel() time_init() ppc_md.calibrate_decr() (pmac_calibrate_decr) via_calibrate_decr() ioremap() and iounmap() are called. The unmap can enable interrupts unexpectedly (cond_resched() in vunmap_pmd_range()), which causes a warning later in the boot sequence in start_kernel(). Use the early_* variants of these IO functions to prevent this. The issue is pre-existing, but is surfaced by commit 721255b9826b ("genirq: Use a maple tree for interrupt descriptor management"). Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230706010816.72682-1-bgray@linux.ibm.com
2023-08-02wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1()Hans de Goede
Using brcmfmac with 6.5-rc3 on a brcmfmac43241b4-sdio triggers a backtrace caused by the following field-spanning warning: memcpy: detected field-spanning write (size 120) of single field "&params_le->channel_list[0]" at drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:1072 (size 2) The driver still works after this warning. The warning was introduced by the new field-spanning write checks which were enabled recently. Fix this by replacing the channel_list[1] declaration at the end of the struct with a flexible array declaration. Most users of struct brcmf_scan_params_le calculate the size to alloc using the size of the non flex-array part of the struct + needed extra space, so they do not care about sizeof(struct brcmf_scan_params_le). brcmf_notify_escan_complete() however uses the struct on the stack, expecting there to be room for at least 1 entry in the channel-list to store the special -1 abort channel-id. To make this work use an anonymous union with a padding member added + the actual channel_list flexible array. Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230729140500.27892-1-hdegoede@redhat.com
2023-08-02vxlan: Fix nexthop hash sizeBenjamin Poirier
The nexthop code expects a 31 bit hash, such as what is returned by fib_multipath_hash() and rt6_multipath_hash(). Passing the 32 bit hash returned by skb_get_hash() can lead to problems related to the fact that 'int hash' is a negative number when the MSB is set. In the case of hash threshold nexthop groups, nexthop_select_path_hthr() will disproportionately select the first nexthop group entry. In the case of resilient nexthop groups, nexthop_select_path_res() may do an out of bounds access in nh_buckets[], for example: hash = -912054133 num_nh_buckets = 2 bucket_index = 65535 which leads to the following panic: BUG: unable to handle page fault for address: ffffc900025910c8 PGD 100000067 P4D 100000067 PUD 10026b067 PMD 0 Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI CPU: 4 PID: 856 Comm: kworker/4:3 Not tainted 6.5.0-rc2+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:nexthop_select_path+0x197/0xbf0 Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85 RSP: 0018:ffff88810c36f260 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8 RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219 R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0 R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900 FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc900025910c8 CR3: 0000000129d00000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x1ee/0x5c0 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? __pfx_page_fault_oops+0x10/0x10 ? search_bpf_extables+0xfe/0x1c0 ? fixup_exception+0x3b/0x470 ? exc_page_fault+0xf6/0x110 ? asm_exc_page_fault+0x26/0x30 ? nexthop_select_path+0x197/0xbf0 ? nexthop_select_path+0x197/0xbf0 ? lock_is_held_type+0xe7/0x140 vxlan_xmit+0x5b2/0x2340 ? __lock_acquire+0x92b/0x3370 ? __pfx_vxlan_xmit+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_register_lock_class+0x10/0x10 ? skb_network_protocol+0xce/0x2d0 ? dev_hard_start_xmit+0xca/0x350 ? __pfx_vxlan_xmit+0x10/0x10 dev_hard_start_xmit+0xca/0x350 __dev_queue_xmit+0x513/0x1e20 ? __pfx___dev_queue_xmit+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? mark_held_locks+0x44/0x90 ? skb_push+0x4c/0x80 ? eth_header+0x81/0xe0 ? __pfx_eth_header+0x10/0x10 ? neigh_resolve_output+0x215/0x310 ? ip6_finish_output2+0x2ba/0xc90 ip6_finish_output2+0x2ba/0xc90 ? lock_release+0x236/0x3e0 ? ip6_mtu+0xbb/0x240 ? __pfx_ip6_finish_output2+0x10/0x10 ? find_held_lock+0x83/0xa0 ? lock_is_held_type+0xe7/0x140 ip6_finish_output+0x1ee/0x780 ip6_output+0x138/0x460 ? __pfx_ip6_output+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_ip6_finish_output+0x10/0x10 NF_HOOK.constprop.0+0xc0/0x420 ? __pfx_NF_HOOK.constprop.0+0x10/0x10 ? ndisc_send_skb+0x2c0/0x960 ? __pfx_lock_release+0x10/0x10 ? __local_bh_enable_ip+0x93/0x110 ? lock_is_held_type+0xe7/0x140 ndisc_send_skb+0x4be/0x960 ? __pfx_ndisc_send_skb+0x10/0x10 ? mark_held_locks+0x65/0x90 ? find_held_lock+0x83/0xa0 ndisc_send_ns+0xb0/0x110 ? __pfx_ndisc_send_ns+0x10/0x10 addrconf_dad_work+0x631/0x8e0 ? lock_acquire+0x180/0x3f0 ? __pfx_addrconf_dad_work+0x10/0x10 ? mark_held_locks+0x24/0x90 process_one_work+0x582/0x9c0 ? __pfx_process_one_work+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? mark_held_locks+0x24/0x90 worker_thread+0x93/0x630 ? __kthread_parkme+0xdc/0x100 ? __pfx_worker_thread+0x10/0x10 kthread+0x1a5/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 RIP: 0000:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0000:0000000000000000 EFLAGS: 00000000 ORIG_RAX: 0000000000000000 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: CR2: ffffc900025910c8 ---[ end trace 0000000000000000 ]--- RIP: 0010:nexthop_select_path+0x197/0xbf0 Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85 RSP: 0018:ffff88810c36f260 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8 RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219 R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0 R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900 FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000129d00000 CR4: 0000000000750ee0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x2ca00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fix this problem by ensuring the MSB of hash is 0 using a right shift - the same approach used in fib_multipath_hash() and rt6_multipath_hash(). Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-02ip6mr: Fix skb_under_panic in ip6mr_cache_report()Yue Haibing
skbuff: skb_under_panic: text:ffffffff88771f69 len:56 put:-4 head:ffff88805f86a800 data:ffff887f5f86a850 tail:0x88 end:0x2c0 dev:pim6reg ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:192! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 22968 Comm: kworker/2:11 Not tainted 6.5.0-rc3-00044-g0a8db05b571a #236 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x152/0x1d0 Call Trace: <TASK> skb_push+0xc4/0xe0 ip6mr_cache_report+0xd69/0x19b0 reg_vif_xmit+0x406/0x690 dev_hard_start_xmit+0x17e/0x6e0 __dev_queue_xmit+0x2d6a/0x3d20 vlan_dev_hard_start_xmit+0x3ab/0x5c0 dev_hard_start_xmit+0x17e/0x6e0 __dev_queue_xmit+0x2d6a/0x3d20 neigh_connected_output+0x3ed/0x570 ip6_finish_output2+0x5b5/0x1950 ip6_finish_output+0x693/0x11c0 ip6_output+0x24b/0x880 NF_HOOK.constprop.0+0xfd/0x530 ndisc_send_skb+0x9db/0x1400 ndisc_send_rs+0x12a/0x6c0 addrconf_dad_completed+0x3c9/0xea0 addrconf_dad_work+0x849/0x1420 process_one_work+0xa22/0x16e0 worker_thread+0x679/0x10c0 ret_from_fork+0x28/0x60 ret_from_fork_asm+0x11/0x20 When setup a vlan device on dev pim6reg, DAD ns packet may sent on reg_vif_xmit(). reg_vif_xmit() ip6mr_cache_report() skb_push(skb, -skb_network_offset(pkt));//skb_network_offset(pkt) is 4 And skb_push declared as: void *skb_push(struct sk_buff *skb, unsigned int len); skb->data -= len; //0xffff88805f86a84c - 0xfffffffc = 0xffff887f5f86a850 skb->data is set to 0xffff887f5f86a850, which is invalid mem addr, lead to skb_push() fails. Fixes: 14fb64e1f449 ("[IPV6] MROUTE: Support PIM-SM (SSM).") Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-02s390/qeth: Don't call dev_close/dev_open (DOWN/UP)Alexandra Winter
dev_close() and dev_open() are issued to change the interface state to DOWN or UP (dev->flags IFF_UP). When the netdev is set DOWN it loses e.g its Ipv6 addresses and routes. We don't want this in cases of device recovery (triggered by hardware or software) or when the qeth device is set offline. Setting a qeth device offline or online and device recovery actions call netif_device_detach() and/or netif_device_attach(). That will reset or set the LOWER_UP indication i.e. change the dev->state Bit __LINK_STATE_PRESENT. That is enough to e.g. cause bond failovers, and still preserves the interface settings that are handled by the network stack. Don't call dev_open() nor dev_close() from the qeth device driver. Let the network stack handle this. Fixes: d4560150cb47 ("s390/qeth: call dev_close() during recovery") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-02Merge branch 'tun-tap-uid'David S. Miller
Laszlo Ersek says: ==================== tun/tap: set sk_uid from current_fsuid() The original patches fixing CVE-2023-1076 are incorrect in my opinion. This small series fixes them up; see the individual commit messages for explanation. I have a very elaborate test procedure demonstrating the problem for both tun and tap; it involves libvirt, qemu, and "crash". I can share that procedure if necessary, but it's indeed quite long (I wrote it originally for our QE team). The patches in this series are supposed to "re-fix" CVE-2023-1076; given that said CVE is classified as Low Impact (CVSSv3=5.5), I'm posting this publicly, and not suggesting any embargo. Red Hat Product Security may assign a new CVE number later. I've tested the patches on top of v6.5-rc4, with "crash" built at commit c74f375e0ef7. Cc: Eric Dumazet <edumazet@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Pietro Borrello <borrello@diag.uniroma1.it> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-02net: tap_open(): set sk_uid from current_fsuid()Laszlo Ersek
Commit 66b2c338adce initializes the "sk_uid" field in the protocol socket (struct sock) from the "/dev/tapX" device node's owner UID. Per original commit 86741ec25462 ("net: core: Add a UID field to struct sock.", 2016-11-04), that's wrong: the idea is to cache the UID of the userspace process that creates the socket. Commit 86741ec25462 mentions socket() and accept(); with "tap", the action that creates the socket is open("/dev/tapX"). Therefore the device node's owner UID is irrelevant. In most cases, "/dev/tapX" will be owned by root, so in practice, commit 66b2c338adce has no observable effect: - before, "sk_uid" would be zero, due to undefined behavior (CVE-2023-1076), - after, "sk_uid" would be zero, due to "/dev/tapX" being owned by root. What matters is the (fs)UID of the process performing the open(), so cache that in "sk_uid". Cc: Eric Dumazet <edumazet@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Pietro Borrello <borrello@diag.uniroma1.it> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 66b2c338adce ("tap: tap_open(): correctly initialize socket uid") Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-02net: tun_chr_open(): set sk_uid from current_fsuid()Laszlo Ersek
Commit a096ccca6e50 initializes the "sk_uid" field in the protocol socket (struct sock) from the "/dev/net/tun" device node's owner UID. Per original commit 86741ec25462 ("net: core: Add a UID field to struct sock.", 2016-11-04), that's wrong: the idea is to cache the UID of the userspace process that creates the socket. Commit 86741ec25462 mentions socket() and accept(); with "tun", the action that creates the socket is open("/dev/net/tun"). Therefore the device node's owner UID is irrelevant. In most cases, "/dev/net/tun" will be owned by root, so in practice, commit a096ccca6e50 has no observable effect: - before, "sk_uid" would be zero, due to undefined behavior (CVE-2023-1076), - after, "sk_uid" would be zero, due to "/dev/net/tun" being owned by root. What matters is the (fs)UID of the process performing the open(), so cache that in "sk_uid". Cc: Eric Dumazet <edumazet@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Pietro Borrello <borrello@diag.uniroma1.it> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Fixes: a096ccca6e50 ("tun: tun_chr_open(): correctly initialize socket uid") Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-02drm/panel: samsung-s6d7aa0: Add MODULE_DEVICE_TABLENikita Travkin
The driver can be built as a module, however the lack of the MODULE_DEVICE_TABLE macro prevents it from being automatically probed from the DT in such case. Add the missed macro to make sure the module can load automatically. Fixes: 6810bb390282 ("drm/panel: Add Samsung S6D7AA0 panel controller driver") Signed-off-by: Nikita Travkin <nikita@trvn.ru> Acked-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230802-gt5-panel-dtable-v1-1-c0a765c175e2@trvn.ru
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-17 23:36:03 +0000