| Age | Commit message (Collapse) | Author |
|---|
|
|
|
The NVDIMM_FAMILY_INTEL 'Enable Latch System Shutdown Status' command
indicates to the platform that system software has acknowledged the most
recent unsafe shutdown status.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Don't crash in case of allocation failure in dax_alloc_inode.
syzkaller hit the following crash on e4880bc5dfb1
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
[..]
RIP: 0010:dax_alloc_inode+0x3b/0x70 drivers/dax/super.c:348
Call Trace:
alloc_inode+0x65/0x180 fs/inode.c:208
new_inode_pseudo+0x69/0x190 fs/inode.c:890
new_inode+0x1c/0x40 fs/inode.c:919
mount_pseudo_xattr+0x288/0x560 fs/libfs.c:261
mount_pseudo include/linux/fs.h:2137 [inline]
dax_mount+0x2e/0x40 drivers/dax/super.c:388
mount_fs+0x66/0x2d0 fs/super.c:1223
Cc: <stable@vger.kernel.org>
Fixes: 7b6be8444e0f ("dax: refactor dax-fs into a generic provider...")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
PMD faults on a zero length file on a file system mounted with -o dax
will not generate SIGBUS as expected.
fd = open(...O_TRUNC);
addr = mmap(NULL, 2*1024*1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
*addr = 'a';
<expect SIGBUS>
The problem is this code in dax_iomap_pmd_fault:
max_pgoff = (i_size_read(inode) - 1) >> PAGE_SHIFT;
If the inode size is zero, we end up with a max_pgoff that is way larger
than 0. :) Fix it by using DIV_ROUND_UP, as is done elsewhere in the
kernel.
I tested this with some simple test code that ensured that SIGBUS was
received where expected.
Cc: <stable@vger.kernel.org>
Fixes: 642261ac995e ("dax: add struct iomap based DAX PMD support")
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Now that dax_flush() is no longer a driver callback (commit c3ca015fab6d
"dax: remove the pmem_dax_ops->flush abstraction"), stop requiring the
dax_read_lock() to be held and the device to be alive. This is in
preparation for switching filesystem-dax to store pfns instead of
sectors in the radix.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
DAX support in brd is awkward because its backing page frames are
distinct from the ones provided by pmem, dcssblk, or axonram. We need
pfn_t_devmap() entries to fully support DAX, and the limited DAX support
for pfn_t_special() page frames is not interesting for brd when pmem is
already a superset of brd. Lastly, brd is the only dax capable driver
that may sleep in its ->direct_access() implementation. So it causes a
global burden with no net gain of kernel functionality.
For all these reasons, remove DAX support.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Before we add another failure reason, quiet the existing log messages.
Leave it to the caller to decide if bdev_dax_supported() failures are
errors worth emitting to the log.
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
While reviewing whether MAP_SYNC should strengthen its current guarantee
of syncing writes from the initiating process to also include
third-party readers observing dirty metadata, Dave pointed out that the
check of IOMAP_WRITE is misplaced.
The policy of what to with IOMAP_F_DIRTY should be separated from the
generic filesystem mechanism of reporting dirty metadata. Move this
policy to the fs-dax core to simplify the per-filesystem iomap handlers,
and further centralize code that implements the MAP_SYNC policy. This
otherwise should not change behavior, it just makes it easier to change
behavior in the future.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Validate command parsing in acpi_nfit_ctl for the clear error command.
This tests for a crash condition introduced by commit 4b27db7e26cd
"acpi, nfit: add support for the _LSI, _LSR, and _LSW label methods".
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Fix occasions in acpi_nfit_ctl where we check the command type without
validating whether we are parsing dimm vs bus level commands. Where the
command numbers alias between dimms and bus we can make the wrong
assumption just checking the raw command number. For example, with a
simple nfit_test mock up of the clear-error command we trigger the
following:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000094
IP: acpi_nfit_ctl+0x29b/0x930 [nfit]
[..]
Call Trace:
nfit_test_probe+0xb85/0xc09 [nfit_test]
platform_drv_probe+0x3b/0xa0
? platform_drv_probe+0x3b/0xa0
driver_probe_device+0x29c/0x450
? test_alloc+0x180/0x180 [nfit_test]
__driver_attach+0xe3/0xf0
? driver_probe_device+0x450/0x450
bus_for_each_dev+0x73/0xc0
driver_attach+0x1e/0x20
bus_add_driver+0x173/0x270
driver_register+0x60/0xe0
__platform_driver_register+0x36/0x40
nfit_test_init+0x2a1/0x1000 [nfit_test]
Fixes: 4b27db7e26cd ("acpi, nfit: add support for the _LSI, _LSR, and...")
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Ensure that the in/out sizes passed in the nd_cmd_package are sane for
the fixed output size commands (i.e. inject error and clear injected
error).
Reported-by: Dariusz Dokupil <dariusz.dokupil@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Return IOMAP_F_DIRTY from xfs_file_iomap_begin() when asked to prepare
blocks for writing and the inode is pinned, and has dirty fields other
than the timestamps. In __xfs_filemap_fault() we then detect this case
and call dax_finish_sync_fault() to make sure all metadata is committed,
and to insert the page table entry.
Note that this will also dirty corresponding radix tree entry which is
what we want - fsync(2) will still provide data integrity guarantees for
applications not using userspace flushing. And applications using
userspace flushing can avoid calling fsync(2) and thus avoid the
performance overhead.
[JK: Added VM_SYNC flag handling]
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
xfs_filemap_pfn_mkwrite() duplicates a lot of __xfs_filemap_fault().
It will also need to handle flushing for synchronous page faults. So
just make that function use __xfs_filemap_fault().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
We return IOMAP_F_DIRTY flag from ext4_iomap_begin() when asked to
prepare blocks for writing and the inode has some uncommitted metadata
changes. In the fault handler ext4_dax_fault() we then detect this case
(through VM_FAULT_NEEDDSYNC return value) and call helper
dax_finish_sync_fault() to flush metadata changes and insert page table
entry. Note that this will also dirty corresponding radix tree entry
which is what we want - fsync(2) will still provide data integrity
guarantees for applications not using userspace flushing. And
applications using userspace flushing can avoid calling fsync(2) and
thus avoid the performance overhead.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
If transaction starting fails, just bail out of the function immediately
instead of checking for that condition throughout the function.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Implement a function that filesystems can call to finish handling of
synchronous page faults. It takes care of syncing appropriare file range
and insertion of page table entry.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add a flag to iomap interface informing the caller that inode needs
fdstasync(2) for returned extent to become persistent and use it in DAX
fault code so that we don't map such extents into page tables
immediately. Instead we propagate the information that fdatasync(2) is
necessary from dax_iomap_fault() with a new VM_FAULT_NEEDDSYNC flag.
Filesystem fault handler is then responsible for calling fdatasync(2)
and inserting pfn into page tables.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Define new MAP_SYNC flag and corresponding VMA VM_SYNC flag. As the
MAP_SYNC flag is not part of LEGACY_MAP_MASK, currently it will be
refused by all MAP_SHARED_VALIDATE map attempts and silently ignored for
everything else.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Currently we dirty radix tree entry whenever dax_insert_mapping_entry()
gets called for a write fault. With synchronous page faults we would
like to insert clean radix tree entry and dirty it only once we call
fdatasync() and update page tables to save some unnecessary cache
flushing. Add 'dirty' argument to dax_insert_mapping_entry() for that.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
For synchronous page fault dax_iomap_fault() will need to return PFN
which will then need to be inserted into page tables after fsync()
completes. Add necessary parameter to dax_iomap_fault().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add missing argument description.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
dax_pmd_insert_mapping() has only one callsite and we will need to
further fine tune what it does for synchronous faults. Just inline it
into the callsite so that we don't have to pass awkward bools around.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
dax_insert_mapping() has only one callsite and we will need to further
fine tune what it does for synchronous faults. Just inline it into the
callsite so that we don't have to pass awkward bools around.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
There are already two users and more are coming.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
There are already two users and more are coming.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Factor out code to get pfn out of iomap that is shared between PTE and
PMD fault path.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
dax_insert_mapping() has lots of arguments and a lot of them is actuall
duplicated by passing vm_fault structure as well. Change the function to
take the same arguments as dax_pmd_insert_mapping().
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
It is unused.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The mmap(2) syscall suffers from the ABI anti-pattern of not validating
unknown flags. However, proposals like MAP_SYNC need a mechanism to
define new behavior that is known to fail on older kernels without the
support. Define a new MAP_SHARED_VALIDATE flag pattern that is
guaranteed to fail on all legacy mmap implementations.
It is worth noting that the original proposal was for a standalone
MAP_VALIDATE flag. However, when that could not be supported by all
archs Linus observed:
I see why you *think* you want a bitmap. You think you want
a bitmap because you want to make MAP_VALIDATE be part of MAP_SYNC
etc, so that people can do
ret = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_SHARED
| MAP_SYNC, fd, 0);
and "know" that MAP_SYNC actually takes.
And I'm saying that whole wish is bogus. You're fundamentally
depending on special semantics, just make it explicit. It's already
not portable, so don't try to make it so.
Rename that MAP_VALIDATE as MAP_SHARED_VALIDATE, make it have a value
of 0x3, and make people do
ret = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_SHARED_VALIDATE
| MAP_SYNC, fd, 0);
and then the kernel side is easier too (none of that random garbage
playing games with looking at the "MAP_VALIDATE bit", but just another
case statement in that map type thing.
Boom. Done.
Similar to ->fallocate() we also want the ability to validate the
support for new flags on a per ->mmap() 'struct file_operations'
instance basis. Towards that end arrange for flags to be generically
validated against a mmap_supported_flags exported by 'struct
file_operations'. By default all existing flags are implicitly
supported, but new flags require MAP_SHARED_VALIDATE and
per-instance-opt-in.
Cc: Jan Kara <jack@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
_calc_vm_trans() does not handle the situation when some of the passed
flags are 0 (which can happen if these VM flags do not make sense for
the architecture). Improve the _calc_vm_trans() macro to return 0 in
such situation. Since all passed flags are constant, this does not add
any runtime overhead.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The injected badrange entries can only be cleared from the kernel's
accounting by writing to the affected blocks, so when such a write sends
the clear errror DSM to nfit_test, also clear the ranges from
nfit_test's badrange list. This lets an 'ARS Inject error status' DSM to
return the correct status, omitting the cleared ranges.
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Now that we're reusing the badrange functions for nfit_test, and that
exposes badrange injection/clearing to userspace via the DSM paths, it
is plausible that a user may call the clear DSM multiple times. Since it
is harmless to do so, we can remove the WARN in badrange_forget.
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add nfit_test emulation for the new ACPI 6.2 error injectino DSMs.
This will allow unit tests to selectively inject the errors they wish to
test for.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[vishal: Move injection functions to ND_CMD_CALL]
[vishal: Add support for the notification option]
[vishal: move an nfit_test private definition into a local header]
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
nfit_test needs to use the poison list manipulation code as well. Make
it more generic and in the process rename poison to badrange, and move
all the related helpers to a new file.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[vishal: Add badrange.o to nfit_test's Kbuild]
[vishal: add a missed include in bus.c for the new badrange functions]
[vishal: rename all instances of 'be' to 'bre']
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Per v1.6 of the NVDIMM_FAMILY_INTEL command set [1] some of the new
commands require rev-id 2. In addition to enabling ND_CMD_CALL for these
new function numbers, add a lookup table for revision-ids by family
and function number.
[1]: http://pmem.io/documents/NVDIMM_DSM_Interface-V1.6.pdf
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
For vendor specific commands that do not have a common kernel
translation, hide them from nmemX/commands. For example, the following
results from new enabling to probe for support of the new
NVDIMM_FAMILY_INTEL DSMs specified in v1.6 of the command specification
[1]:
# cat /sys/bus/nd/devices/nmem0/commands
smart smart_thresh flags get_size get_data set_data effect_size
effect_log vendor cmd_call unknown unknown unknown unknown unknown
unknown unknown unknown
[1]: https://pmem.io/documents/NVDIMM_DSM_Interface-V1.6.pdf
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Fix this build warning:
warning: 'phys' may be used uninitialized in this function
[-Wuninitialized]
As reported here:
https://lkml.org/lkml/2017/10/16/152
http://kisskb.ellerman.id.au/kisskb/buildresult/13181373/log/
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
And update the entry for filesystem DAX to differentiate them.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
- a couple of serious fixes: use after free and blacklist for WRITE
SAME
- one error leg fix: write_pending failure
- one user experience problem: do not override max_sectors_kb
- one minor unused function removal
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ibmvscsis: Fix write_pending failure path
scsi: libiscsi: Remove iscsi_destroy_session
scsi: libiscsi: Fix use-after-free race during iscsi_session_teardown
scsi: sd: Do not override max_sectors_kb sysfs setting
scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C has three driver fixes for the newly introduced drivers and one ID
addition for the i801 driver"
* 'i2c/for-current-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i2c-stm32f7: make structure stm32f7_setup static const
i2c: ensure termination of *_device_id tables
i2c: i801: Add support for Intel Cedar Fork
i2c: stm32f7: fix setup structure
|
|
The functions create_namespace_pmem and create_namespace_blk are local
to the source and do not need to be in global scope, so make them static.
Cleans up sparse warnings:
symbol 'create_namespace_pmem' was not declared. Should it be static?
symbol 'create_namespace_blk' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Given that we now how have two mechanisms for a DIMM to indicate that it
is locked:
* NVDIMM_FAMILY_INTEL 'get_config_size' _DSM command
* ACPI 6.2 Label Storage Read / Write commands
...export the generic libnvdimm DIMM status in a new 'flags' attribute.
This attribute can also reflect the 'alias' state which indicates
whether the nvdimm core is enforcing labels for aliased-region-capacity
that the given dimm is an interleave-set member.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
ACPI 6.2 adds support for named methods to access the label storage area
of an NVDIMM. We prefer these new methods if available and otherwise
fallback to the NVDIMM_FAMILY_INTEL _DSMs. The kernel ioctls,
ND_IOCTL_{GET,SET}_CONFIG_{SIZE,DATA}, remain generic and the driver
translates the 'package' payloads into the NVDIMM_FAMILY_INTEL 'buffer'
format to maintain compatibility with existing userspace and keep the
output buffer parsing code in the driver common.
The output payloads are mostly compatible save for the 'label area
locked' status that moves from the 'config_size' (_LSI) command to the
'config_read' (_LSR) command status.
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix driver strength selection when selecting hs400es
- Delete bounce buffer handling:
This change fixes a problem related to how bounce buffers are being
allocated. However, instead of trying to fix that, let's just
remove the mmc bounce buffer code altogether, as it has practically
no use.
MMC host:
- meson-gx: A couple of fixes related to clock/phase/tuning
- sdhci-xenon: Fix clock resource by adding an optional bus clock"
* tag 'mmc-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-xenon: Fix clock resource by adding an optional bus clock
mmc: meson-gx: include tx phase in the tuning process
mmc: meson-gx: fix rx phase reset
mmc: meson-gx: make sure the clock is rounded down
mmc: Delete bounce buffer handling
mmc: core: add driver strength selection when selecting hs400es
|
|
To test ndctl list which use interface of Translate SPA,
nfit_test needs to emulates it.
This test module searches region which includes SPA and
returns 1 dimm handle which is last one.
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
nfit_test
Though nfit_test need to show what feature is supported via ND_CMD_CALL on
device/nfit/dsm_mask, currently there is no way to tell it.
This patch makes to enable it.
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix up error path in xgene driver"
* tag 'hwmon-for-linus-v4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (xgene) Fix up error handling path mixup in 'xgene_hwmon_probe()'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
- build fix to export the clk_bulk_prepare() symbol
- suspend fix for Samsung Exynos SoCs where we need to keep clks on
across suspend
- two critical clk markings for clks that shouldn't ever turn off on
Rockchip SoCs
- a fix for a copy-paste mistake on Rockchip rk3128 causing some clks
to touch the same bit and trample over one another
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: exynos4: Enable VPLL and EPLL clocks for suspend/resume cycle
clk: Export clk_bulk_prepare()
clk: rockchip: add sclk_timer5 as critical clock on rk3128
clk: rockchip: fix up rk3128 pvtm and mipi_24m gate regs error
clk: rockchip: add pclk_pmu as critical clock on rk3128
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC udpates from Vineet Gupta:
- updates for various platforms
- boot log updates for upcoming HS48 family of cores (dual issue)
* tag 'arc-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: [plat-hsdk]: Add reset controller node to manage ethernet reset
ARC: [plat-hsdk]: Temporary fix to set CPU frequency to 1GHz
ARC: fix allnoconfig build warning
ARCv2: boot log: identify HS48 cores (dual issue)
ARC: boot log: decontaminate ARCv2 ISA_CONFIG register
arc: remove redundant UTS_MACHINE define in arch/arc/Makefile
ARC: [plat-eznps] Update platform maintainer as Noam left
ARC: [plat-hsdk] use actual clk driver to manage cpu clk
ARC: [*defconfig] Reenable soft lock-up detector
ARC: [plat-axs10x] sdio: Temporary fix of sdio ciu frequency
ARC: [plat-hsdk] sdio: Temporary fix of sdio ciu frequency
ARC: [plat-axs103] Add temporary quirk to reset ethernet IP
|
