summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-04powerpc/pseries: Mark accumulate_stolen_time() as notraceMichael Ellerman
[ Upstream commit eb8e20f89093b64f48975c74ccb114e6775cee22 ] accumulate_stolen_time() is called prior to interrupt state being reconciled, which can trip the warning in arch_local_irq_restore(): WARNING: CPU: 5 PID: 1017 at arch/powerpc/kernel/irq.c:258 .arch_local_irq_restore+0x9c/0x130 ... NIP .arch_local_irq_restore+0x9c/0x130 LR .rb_start_commit+0x38/0x80 Call Trace: .ring_buffer_lock_reserve+0xe4/0x620 .trace_function+0x44/0x210 .function_trace_call+0x148/0x170 .ftrace_ops_no_ops+0x180/0x1d0 ftrace_call+0x4/0x8 .accumulate_stolen_time+0x1c/0xb0 decrementer_common+0x124/0x160 For now just mark it as notrace. We may change the ordering to call it after interrupt state has been reconciled, but that is a larger change. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191024055932.27940-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04scsi: csiostor: Don't enable IRQs too earlyDan Carpenter
[ Upstream commit d6c9b31ac3064fbedf8961f120a4c117daa59932 ] These are called with IRQs disabled from csio_mgmt_tmo_handler() so we can't call spin_unlock_irq() or it will enable IRQs prematurely. Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver") Link: https://lore.kernel.org/r/20191019085913.GA14245@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04scsi: lpfc: Fix SLI3 hba in loop mode not discovering devicesJames Smart
[ Upstream commit feff8b3d84d3d9570f893b4d83e5eab6693d6a52 ] When operating in private loop mode, PLOGI exchanges are racing and the driver tries to abort it's PLOGI. But the PLOGI abort ends up terminating the login with the other end causing the other end to abort its PLOGI as well. Discovery never fully completes. Fix by disabling the PLOGI abort when private loop and letting the state machine play out. Link: https://lore.kernel.org/r/20191018211832.7917-5-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04scsi: target: compare full CHAP_A Algorithm stringsDavid Disseldorp
[ Upstream commit 9cef2a7955f2754257a7cddedec16edae7b587d0 ] RFC 2307 states: For CHAP [RFC1994], in the first step, the initiator MUST send: CHAP_A=<A1,A2...> Where A1,A2... are proposed algorithms, in order of preference. ... For the Algorithm, as stated in [RFC1994], one value is required to be implemented: 5 (CHAP with MD5) LIO currently checks for this value by only comparing a single byte in the tokenized Algorithm string, which means that any value starting with a '5' (e.g. "55") is interpreted as "CHAP with MD5". Fix this by comparing the entire tokenized string. Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Link: https://lore.kernel.org/r/20190912095547.22427-2-ddiss@suse.de Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04iommu/tegra-smmu: Fix page tables in > 4 GiB memoryThierry Reding
[ Upstream commit 96d3ab802e4930a29a33934373157d6dff1b2c7e ] Page tables that reside in physical memory beyond the 4 GiB boundary are currently not working properly. The reason is that when the physical address for page directory entries is read, it gets truncated at 32 bits and can cause crashes when passing that address to the DMA API. Fix this by first casting the PDE value to a dma_addr_t and then using the page frame number mask for the SMMU instance to mask out the invalid bits, which are typically used for mapping attributes, etc. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04Input: atmel_mxt_ts - disable IRQ across suspendEvan Green
[ Upstream commit 463fa44eec2fef50d111ed0199cf593235065c04 ] Across suspend and resume, we are seeing error messages like the following: atmel_mxt_ts i2c-PRP0001:00: __mxt_read_reg: i2c transfer failed (-121) atmel_mxt_ts i2c-PRP0001:00: Failed to read T44 and T5 (-121) This occurs because the driver leaves its IRQ enabled. Upon resume, there is an IRQ pending, but the interrupt is serviced before both the driver and the underlying I2C bus have been resumed. This causes EREMOTEIO errors. Disable the IRQ in suspend, and re-enable it on resume. If there are cases where the driver enters suspend with interrupts disabled, that's a bug we should fix separately. Signed-off-by: Evan Green <evgreen@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04scsi: lpfc: Fix locking on mailbox command completionJames Smart
[ Upstream commit 07b8582430370097238b589f4e24da7613ca6dd3 ] Symptoms were seen of the driver not having valid data for mailbox commands. After debugging, the following sequence was found: The driver maintains a port-wide pointer of the mailbox command that is currently in execution. Once finished, the port-wide pointer is cleared (done in lpfc_sli4_mq_release()). The next mailbox command issued will set the next pointer and so on. The mailbox response data is only copied if there is a valid port-wide pointer. In the failing case, it was seen that a new mailbox command was being attempted in parallel with the completion. The parallel path was seeing the mailbox no long in use (flag check under lock) and thus set the port pointer. The completion path had cleared the active flag under lock, but had not touched the port pointer. The port pointer is cleared after the lock is released. In this case, the completion path cleared the just-set value by the parallel path. Fix by making the calls that clear mbox state/port pointer while under lock. Also slightly cleaned up the error path. Link: https://lore.kernel.org/r/20190922035906.10977-8-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04scsi: mpt3sas: Fix clear pending bit in ioctl statusSreekanth Reddy
[ Upstream commit 782b281883caf70289ba6a186af29441a117d23e ] When user issues diag register command from application with required size, and if driver unable to allocate the memory, then it will fail the register command. While failing the register command, driver is not currently clearing MPT3_CMD_PENDING bit in ctl_cmds.status variable which was set before trying to allocate the memory. As this bit is set, subsequent register command will be failed with BUSY status even when user wants to register the trace buffer will less memory. Clear MPT3_CMD_PENDING bit in ctl_cmds.status before returning the diag register command with no memory status. Link: https://lore.kernel.org/r/1568379890-18347-4-git-send-email-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04perf probe: Fix to show function entry line as probe-ableMasami Hiramatsu
commit 91e2f539eeda26ab00bd03fae8dc434c128c85ed upstream. Fix die_walk_lines() to list the function entry line correctly. Since the dwarf_entrypc() does not return the entry pc if the DIE has only range attribute, __die_walk_funclines() fails to list the declaration line (entry line) in that case. To solve this issue, this introduces die_entrypc() which correctly returns the entry PC (the first address range) even if the DIE has only range attribute. With this fix die_walk_lines() shows the function entry line is able to probe correctly. Fixes: 4cc9cec636e7 ("perf probe: Introduce lines walker interface") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/157190837419.1859.4619125803596816752.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Thomas Backlund <tmb@mageia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04mmc: sdhci-of-esdhc: fix P2020 errata handlingYangbo Lu
commit fe0acab448f68c3146235afe03fb932e242ec94c upstream. Two previous patches introduced below quirks for P2020 platforms. - SDHCI_QUIRK_RESET_AFTER_REQUEST - SDHCI_QUIRK_BROKEN_TIMEOUT_VAL The patches made a mistake to add them in quirks2 of sdhci_host structure, while they were defined for quirks. host->quirks2 |= SDHCI_QUIRK_RESET_AFTER_REQUEST; host->quirks2 |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; This patch is to fix them. host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST; host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; Fixes: 05cb6b2a66fa ("mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 support") Fixes: a46e42712596 ("mmc: sdhci-of-esdhc: add erratum eSDHC5 support") Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191216031842.40068-1-yangbo.lu@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04powerpc/irq: fix stack overflow verificationChristophe Leroy
commit 099bc4812f09155da77eeb960a983470249c9ce1 upstream. Before commit 0366a1c70b89 ("powerpc/irq: Run softirqs off the top of the irq stack"), check_stack_overflow() was called by do_IRQ(), before switching to the irq stack. In that commit, do_IRQ() was renamed __do_irq(), and is now executing on the irq stack, so check_stack_overflow() has just become almost useless. Move check_stack_overflow() call in do_IRQ() to do the check while still on the current stack. Fixes: 0366a1c70b89 ("powerpc/irq: Run softirqs off the top of the irq stack") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/e033aa8116ab12b7ca9a9c75189ad0741e3b9b5f.1575872340.git.christophe.leroy@c-s.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04ext4: check for directory entries too close to block endJan Kara
commit 109ba779d6cca2d519c5dd624a3276d03e21948e upstream. ext4_check_dir_entry() currently does not catch a case when a directory entry ends so close to the block end that the header of the next directory entry would not fit in the remaining space. This can lead to directory iteration code trying to access address beyond end of current buffer head leading to oops. CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191202170213.4761-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04staging: comedi: gsc_hpdi: check dma_alloc_coherent() return valueIan Abbott
commit ab42b48f32d4c766420c3499ee9c0289b7028182 upstream. The "auto-attach" handler function `gsc_hpdi_auto_attach()` calls `dma_alloc_coherent()` in a loop to allocate some DMA data buffers, and also calls it to allocate a buffer for a DMA descriptor chain. However, it does not check the return value of any of these calls. Change `gsc_hpdi_auto_attach()` to return `-ENOMEM` if any of these `dma_alloc_coherent()` calls fail. This will result in the comedi core calling the "detach" handler `gsc_hpdi_detach()` as part of the clean-up, which will call `gsc_hpdi_free_dma()` to free any allocated DMA coherent memory buffers. Cc: <stable@vger.kernel.org> #4.6+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20191216110823.216237-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04platform/x86: hp-wmi: Make buffer for HPWMI_FEATURE2_QUERY 128 bytesHans de Goede
commit 133b2acee3871ae6bf123b8fe34be14464aa3d2c upstream. At least on the HP Envy x360 15-cp0xxx model the WMI interface for HPWMI_FEATURE2_QUERY requires an outsize of at least 128 bytes, otherwise it fails with an error code 5 (HPWMI_RET_INVALID_PARAMETERS): Dec 06 00:59:38 kernel: hp_wmi: query 0xd returned error 0x5 We do not care about the contents of the buffer, we just want to know if the HPWMI_FEATURE2_QUERY command is supported. This commits bumps the buffer size, fixing the error. Fixes: 8a1513b4932 ("hp-wmi: limit hotkey enable") Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04USB: EHCI: Do not return -EPIPE when hub is disconnectedErkka Talvitie
commit 64cc3f12d1c7dd054a215bc1ff9cc2abcfe35832 upstream. When disconnecting a USB hub that has some child device(s) connected to it (such as a USB mouse), then the stack tries to clear halt and reset device(s) which are _already_ physically disconnected. The issue has been reproduced with: CPU: IMX6D5EYM10AD or MCIMX6D5EYM10AE. SW: U-Boot 2019.07 and kernel 4.19.40. CPU: HP Proliant Microserver Gen8. SW: Linux version 4.2.3-300.fc23.x86_64 In this situation there will be error bit for MMF active yet the CERR equals EHCI_TUNE_CERR + halt. Existing implementation interprets this as a stall [1] (chapter 8.4.5). The possible conditions when the MMF will be active + halt can be found from [2] (Table 4-13). Fix for the issue is to check whether MMF is active and PID Code is IN before checking for the stall. If these conditions are true then it is not a stall. What happens after the fix is that when disconnecting a hub with attached device(s) the situation is not interpret as a stall. [1] [https://www.usb.org/document-library/usb-20-specification, usb_20.pdf] [2] [https://www.intel.com/content/dam/www/public/us/en/documents/ technical-specifications/ehci-specification-for-usb.pdf] Signed-off-by: Erkka Talvitie <erkka.talvitie@vincit.fi> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/ef70941d5f349767f19c0ed26b0dd9eed8ad81bb.1576050523.git.erkka.talvitie@vincit.fi Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04usbip: Fix error path of vhci_recv_ret_submit()Suwan Kim
commit aabb5b833872524eaf28f52187e5987984982264 upstream. If a transaction error happens in vhci_recv_ret_submit(), event handler closes connection and changes port status to kick hub_event. Then hub tries to flush the endpoint URBs, but that causes infinite loop between usb_hub_flush_endpoint() and vhci_urb_dequeue() because "vhci_priv" in vhci_urb_dequeue() was already released by vhci_recv_ret_submit() before a transmission error occurred. Thus, vhci_urb_dequeue() terminates early and usb_hub_flush_endpoint() continuously calls vhci_urb_dequeue(). The root cause of this issue is that vhci_recv_ret_submit() terminates early without giving back URB when transaction error occurs in vhci_recv_ret_submit(). That causes the error URB to still be linked at endpoint list without “vhci_priv". So, in the case of transaction error in vhci_recv_ret_submit(), unlink URB from the endpoint, insert proper error code in urb->status and give back URB. Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20191213023055.19933-3-suwan.kim027@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04net: dst: Force 4-byte alignment of dst_metricsGeert Uytterhoeven
[ Upstream commit 258a980d1ec23e2c786e9536a7dd260bea74bae6 ] When storing a pointer to a dst_metrics structure in dst_entry._metrics, two flags are added in the least significant bits of the pointer value. Hence this assumes all pointers to dst_metrics structures have at least 4-byte alignment. However, on m68k, the minimum alignment of 32-bit values is 2 bytes, not 4 bytes. Hence in some kernel builds, dst_default_metrics may be only 2-byte aligned, leading to obscure boot warnings like: WARNING: CPU: 0 PID: 7 at lib/refcount.c:28 refcount_warn_saturate+0x44/0x9a refcount_t: underflow; use-after-free. Modules linked in: CPU: 0 PID: 7 Comm: ksoftirqd/0 Tainted: G W 5.5.0-rc2-atari-01448-g114a1a1038af891d-dirty #261 Stack from 10835e6c: 10835e6c 0038134f 00023fa6 00394b0f 0000001c 00000009 00321560 00023fea 00394b0f 0000001c 001a70f8 00000009 00000000 10835eb4 00000001 00000000 04208040 0000000a 00394b4a 10835ed4 00043aa8 001a70f8 00394b0f 0000001c 00000009 00394b4a 0026aba8 003215a4 00000003 00000000 0026d5a8 00000001 003215a4 003a4361 003238d6 000001f0 00000000 003215a4 10aa3b00 00025e84 003ddb00 10834000 002416a8 10aa3b00 00000000 00000080 000aa038 0004854a Call Trace: [<00023fa6>] __warn+0xb2/0xb4 [<00023fea>] warn_slowpath_fmt+0x42/0x64 [<001a70f8>] refcount_warn_saturate+0x44/0x9a [<00043aa8>] printk+0x0/0x18 [<001a70f8>] refcount_warn_saturate+0x44/0x9a [<0026aba8>] refcount_sub_and_test.constprop.73+0x38/0x3e [<0026d5a8>] ipv4_dst_destroy+0x5e/0x7e [<00025e84>] __local_bh_enable_ip+0x0/0x8e [<002416a8>] dst_destroy+0x40/0xae Fix this by forcing 4-byte alignment of all dst_metrics structures. Fixes: e5fd387ad5b30ca3 ("ipv6: do not overwrite inetpeer metrics prematurely") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04sctp: fully initialize v4 addr in some functionsXin Long
[ Upstream commit b6f3320b1d5267e7b583a6d0c88dda518101740c ] Syzbot found a crash: BUG: KMSAN: uninit-value in crc32_body lib/crc32.c:112 [inline] BUG: KMSAN: uninit-value in crc32_le_generic lib/crc32.c:179 [inline] BUG: KMSAN: uninit-value in __crc32c_le_base+0x4fa/0xd30 lib/crc32.c:202 Call Trace: crc32_body lib/crc32.c:112 [inline] crc32_le_generic lib/crc32.c:179 [inline] __crc32c_le_base+0x4fa/0xd30 lib/crc32.c:202 chksum_update+0xb2/0x110 crypto/crc32c_generic.c:90 crypto_shash_update+0x4c5/0x530 crypto/shash.c:107 crc32c+0x150/0x220 lib/libcrc32c.c:47 sctp_csum_update+0x89/0xa0 include/net/sctp/checksum.h:36 __skb_checksum+0x1297/0x12a0 net/core/skbuff.c:2640 sctp_compute_cksum include/net/sctp/checksum.h:59 [inline] sctp_packet_pack net/sctp/output.c:528 [inline] sctp_packet_transmit+0x40fb/0x4250 net/sctp/output.c:597 sctp_outq_flush_transports net/sctp/outqueue.c:1146 [inline] sctp_outq_flush+0x1823/0x5d80 net/sctp/outqueue.c:1194 sctp_outq_uncork+0xd0/0xf0 net/sctp/outqueue.c:757 sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1781 [inline] sctp_side_effects net/sctp/sm_sideeffect.c:1184 [inline] sctp_do_sm+0x8fe1/0x9720 net/sctp/sm_sideeffect.c:1155 sctp_primitive_REQUESTHEARTBEAT+0x175/0x1a0 net/sctp/primitive.c:185 sctp_apply_peer_addr_params+0x212/0x1d40 net/sctp/socket.c:2433 sctp_setsockopt_peer_addr_params net/sctp/socket.c:2686 [inline] sctp_setsockopt+0x189bb/0x19090 net/sctp/socket.c:4672 The issue was caused by transport->ipaddr set with uninit addr param, which was passed by: sctp_transport_init net/sctp/transport.c:47 [inline] sctp_transport_new+0x248/0xa00 net/sctp/transport.c:100 sctp_assoc_add_peer+0x5ba/0x2030 net/sctp/associola.c:611 sctp_process_param net/sctp/sm_make_chunk.c:2524 [inline] where 'addr' is set by sctp_v4_from_addr_param(), and it doesn't initialize the padding of addr->v4. Later when calling sctp_make_heartbeat(), hbinfo.daddr(=transport->ipaddr) will become the part of skb, and the issue occurs. This patch is to fix it by initializing the padding of addr->v4 in sctp_v4_from_addr_param(), as well as other functions that do the similar thing, and these functions shouldn't trust that the caller initializes the memory, as Marcelo suggested. Reported-by: syzbot+6dcbfea81cd3d4dd0b02@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04net: usb: lan78xx: Fix suspend/resume PHY register access errorCristian Birsan
[ Upstream commit 20032b63586ac6c28c936dff696981159913a13f ] Lan78xx driver accesses the PHY registers through MDIO bus over USB connection. When performing a suspend/resume, the PHY registers can be accessed before the USB connection is resumed. This will generate an error and will prevent the device to resume correctly. This patch adds the dependency between the MDIO bus and USB device to allow correct handling of suspend/resume. Fixes: ce85e13ad6ef ("lan78xx: Update to use phylib instead of mii_if_info.") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04net: qlogic: Fix error paths in ql_alloc_large_buffers()Ben Hutchings
[ Upstream commit cad46039e4c99812db067c8ac22a864960e7acc4 ] ql_alloc_large_buffers() has the usual RX buffer allocation loop where it allocates skbs and maps them for DMA. It also treats failure as a fatal error. There are (at least) three bugs in the error paths: 1. ql_free_large_buffers() assumes that the lrg_buf[] entry for the first buffer that couldn't be allocated will have .skb == NULL. But the qla_buf[] array is not zero-initialised. 2. ql_free_large_buffers() DMA-unmaps all skbs in lrg_buf[]. This is incorrect for the last allocated skb, if DMA mapping failed. 3. Commit 1acb8f2a7a9f ("net: qlogic: Fix memory leak in ql_alloc_large_buffers") added a direct call to dev_kfree_skb_any() after the skb is recorded in lrg_buf[], so ql_free_large_buffers() will double-free it. The bugs are somewhat inter-twined, so fix them all at once: * Clear each entry in qla_buf[] before attempting to allocate an skb for it. This goes half-way to fixing bug 1. * Set the .skb field only after the skb is DMA-mapped. This fixes the rest. Fixes: 1357bfcf7106 ("qla3xxx: Dynamically size the rx buffer queue ...") Fixes: 0f8ab89e825f ("qla3xxx: Check return code from pci_map_single() ...") Fixes: 1acb8f2a7a9f ("net: qlogic: Fix memory leak in ql_alloc_large_buffers") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04net: nfc: nci: fix a possible sleep-in-atomic-context bug in ↵Jia-Ju Bai
nci_uart_tty_receive() [ Upstream commit b7ac893652cafadcf669f78452329727e4e255cc ] The kernel may sleep while holding a spinlock. The function call path (from bottom to top) in Linux 4.19 is: net/nfc/nci/uart.c, 349: nci_skb_alloc in nci_uart_default_recv_buf net/nfc/nci/uart.c, 255: (FUNC_PTR)nci_uart_default_recv_buf in nci_uart_tty_receive net/nfc/nci/uart.c, 254: spin_lock in nci_uart_tty_receive nci_skb_alloc(GFP_KERNEL) can sleep at runtime. (FUNC_PTR) means a function pointer is called. To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC for nci_skb_alloc(). This bug is found by a static analysis tool STCheck written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04net: hisilicon: Fix a BUG trigered by wrong bytes_complJiangfeng Xiao
[ Upstream commit 90b3b339364c76baa2436445401ea9ade040c216 ] When doing stress test, we get the following trace: kernel BUG at lib/dynamic_queue_limits.c:26! Internal error: Oops - BUG: 0 [#1] SMP ARM Modules linked in: hip04_eth CPU: 0 PID: 2003 Comm: tDblStackPcap0 Tainted: G O L 4.4.197 #1 Hardware name: Hisilicon A15 task: c3637668 task.stack: de3bc000 PC is at dql_completed+0x18/0x154 LR is at hip04_tx_reclaim+0x110/0x174 [hip04_eth] pc : [<c041abfc>] lr : [<bf0003a8>] psr: 800f0313 sp : de3bdc2c ip : 00000000 fp : c020fb10 r10: 00000000 r9 : c39b4224 r8 : 00000001 r7 : 00000046 r6 : c39b4000 r5 : 0078f392 r4 : 0078f392 r3 : 00000047 r2 : 00000000 r1 : 00000046 r0 : df5d5c80 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 32c5387d Table: 1e189b80 DAC: 55555555 Process tDblStackPcap0 (pid: 2003, stack limit = 0xde3bc190) Stack: (0xde3bdc2c to 0xde3be000) [<c041abfc>] (dql_completed) from [<bf0003a8>] (hip04_tx_reclaim+0x110/0x174 [hip04_eth]) [<bf0003a8>] (hip04_tx_reclaim [hip04_eth]) from [<bf0012c0>] (hip04_rx_poll+0x20/0x388 [hip04_eth]) [<bf0012c0>] (hip04_rx_poll [hip04_eth]) from [<c04c8d9c>] (net_rx_action+0x120/0x374) [<c04c8d9c>] (net_rx_action) from [<c021eaf4>] (__do_softirq+0x218/0x318) [<c021eaf4>] (__do_softirq) from [<c021eea0>] (irq_exit+0x88/0xac) [<c021eea0>] (irq_exit) from [<c0240130>] (msa_irq_exit+0x11c/0x1d4) [<c0240130>] (msa_irq_exit) from [<c0267ba8>] (__handle_domain_irq+0x110/0x148) [<c0267ba8>] (__handle_domain_irq) from [<c0201588>] (gic_handle_irq+0xd4/0x118) [<c0201588>] (gic_handle_irq) from [<c0558360>] (__irq_svc+0x40/0x58) Exception stack(0xde3bdde0 to 0xde3bde28) dde0: 00000000 00008001 c3637668 00000000 00000000 a00f0213 dd3627a0 c0af6380 de00: c086d380 a00f0213 c0a22a50 de3bde6c 00000002 de3bde30 c0558138 c055813c de20: 600f0213 ffffffff [<c0558360>] (__irq_svc) from [<c055813c>] (_raw_spin_unlock_irqrestore+0x44/0x54) Kernel panic - not syncing: Fatal exception in interrupt Pre-modification code: int hip04_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev) { [...] [1] priv->tx_head = TX_NEXT(tx_head); [2] count++; [3] netdev_sent_queue(ndev, skb->len); [...] } An rx interrupt occurs if hip04_mac_start_xmit just executes to the line 2, tx_head has been updated, but corresponding 'skb->len' has not been added to dql_queue. And then hip04_mac_interrupt->__napi_schedule->hip04_rx_poll->hip04_tx_reclaim In hip04_tx_reclaim, because tx_head has been updated, bytes_compl will plus an additional "skb-> len" which has not been added to dql_queue. And then trigger the BUG_ON(bytes_compl > num_queued - dql->num_completed). To solve the problem described above, we put "netdev_sent_queue(ndev, skb->len);" before "priv->tx_head = TX_NEXT(tx_head);" Fixes: a41ea46a9a12 ("net: hisilicon: new hip04 ethernet driver") Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04mod_devicetable: fix PHY module formatRussell King
[ Upstream commit d2ed49cf6c13e379c5819aa5ac20e1f9674ebc89 ] When a PHY is probed, if the top bit is set, we end up requesting a module with the string "mdio:-10101110000000100101000101010001" - the top bit is printed to a signed -1 value. This leads to the module not being loaded. Fix the module format string and the macro generating the values for it to ensure that we only print unsigned types and the top bit is always 0/1. We correctly end up with "mdio:10101110000000100101000101010001". Fixes: 8626d3b43280 ("phylib: Support phy module autoloading") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04fjes: fix missed check in fjes_acpi_addChuhong Yuan
[ Upstream commit a288f105a03a7e0e629a8da2b31f34ebf0343ee2 ] fjes_acpi_add() misses a check for platform_device_register_simple(). Add a check to fix it. Fixes: 658d439b2292 ("fjes: Introduce FUJITSU Extended Socket Network Device driver") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04af_packet: set defaule value for tmoMao Wenan
[ Upstream commit b43d1f9f7067c6759b1051e8ecb84e82cef569fe ] There is softlockup when using TPACKET_V3: ... NMI watchdog: BUG: soft lockup - CPU#2 stuck for 60010ms! (__irq_svc) from [<c0558a0c>] (_raw_spin_unlock_irqrestore+0x44/0x54) (_raw_spin_unlock_irqrestore) from [<c027b7e8>] (mod_timer+0x210/0x25c) (mod_timer) from [<c0549c30>] (prb_retire_rx_blk_timer_expired+0x68/0x11c) (prb_retire_rx_blk_timer_expired) from [<c027a7ac>] (call_timer_fn+0x90/0x17c) (call_timer_fn) from [<c027ab6c>] (run_timer_softirq+0x2d4/0x2fc) (run_timer_softirq) from [<c021eaf4>] (__do_softirq+0x218/0x318) (__do_softirq) from [<c021eea0>] (irq_exit+0x88/0xac) (irq_exit) from [<c0240130>] (msa_irq_exit+0x11c/0x1d4) (msa_irq_exit) from [<c0209cf0>] (handle_IPI+0x650/0x7f4) (handle_IPI) from [<c02015bc>] (gic_handle_irq+0x108/0x118) (gic_handle_irq) from [<c0558ee4>] (__irq_usr+0x44/0x5c) ... If __ethtool_get_link_ksettings() is failed in prb_calc_retire_blk_tmo(), msec and tmo will be zero, so tov_in_jiffies is zero and the timer expire for retire_blk_timer is turn to mod_timer(&pkc->retire_blk_timer, jiffies + 0), which will trigger cpu usage of softirq is 100%. Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.") Tested-by: Xiao Jiangfeng <xiaojiangfeng@huawei.com> Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04ALSA: pcm: Avoid possible info leaks from PCM stream buffersTakashi Iwai
commit add9d56d7b3781532208afbff5509d7382fb6efe upstream. The current PCM code doesn't initialize explicitly the buffers allocated for PCM streams, hence it might leak some uninitialized kernel data or previous stream contents by mmapping or reading the buffer before actually starting the stream. Since this is a common problem, this patch simply adds the clearance of the buffer data at hw_params callback. Although this does only zero-clear no matter which format is used, which doesn't mean the silence for some formats, but it should be OK because the intention is just to clear the previous data on the buffer. Reported-by: Lionel Koenig <lionel.koenig@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191211155742.3213-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04Btrfs: fix removal logic of the tree mod log that leads to use-after-free issuesFilipe Manana
[ Upstream commit 6609fee8897ac475378388238456c84298bff802 ] When a tree mod log user no longer needs to use the tree it calls btrfs_put_tree_mod_seq() to remove itself from the list of users and delete all no longer used elements of the tree's red black tree, which should be all elements with a sequence number less then our equals to the caller's sequence number. However the logic is broken because it can delete and free elements from the red black tree that have a sequence number greater then the caller's sequence number: 1) At a point in time we have sequence numbers 1, 2, 3 and 4 in the tree mod log; 2) The task which got assigned the sequence number 1 calls btrfs_put_tree_mod_seq(); 3) Sequence number 1 is deleted from the list of sequence numbers; 4) The current minimum sequence number is computed to be the sequence number 2; 5) A task using sequence number 2 is at tree_mod_log_rewind() and gets a pointer to one of its elements from the red black tree through a call to tree_mod_log_search(); 6) The task with sequence number 1 iterates the red black tree of tree modification elements and deletes (and frees) all elements with a sequence number less then or equals to 2 (the computed minimum sequence number) - it ends up only leaving elements with sequence numbers of 3 and 4; 7) The task with sequence number 2 now uses the pointer to its element, already freed by the other task, at __tree_mod_log_rewind(), resulting in a use-after-free issue. When CONFIG_DEBUG_PAGEALLOC=y it produces a trace like the following: [16804.546854] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [16804.547451] CPU: 0 PID: 28257 Comm: pool Tainted: G W 5.4.0-rc8-btrfs-next-51 #1 [16804.548059] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 [16804.548666] RIP: 0010:rb_next+0x16/0x50 (...) [16804.550581] RSP: 0018:ffffb948418ef9b0 EFLAGS: 00010202 [16804.551227] RAX: 6b6b6b6b6b6b6b6b RBX: ffff90e0247f6600 RCX: 6b6b6b6b6b6b6b6b [16804.551873] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff90e0247f6600 [16804.552504] RBP: ffff90dffe0d4688 R08: 0000000000000001 R09: 0000000000000000 [16804.553136] R10: ffff90dffa4a0040 R11: 0000000000000000 R12: 000000000000002e [16804.553768] R13: ffff90e0247f6600 R14: 0000000000001663 R15: ffff90dff77862b8 [16804.554399] FS: 00007f4b197ae700(0000) GS:ffff90e036a00000(0000) knlGS:0000000000000000 [16804.555039] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [16804.555683] CR2: 00007f4b10022000 CR3: 00000002060e2004 CR4: 00000000003606f0 [16804.556336] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [16804.556968] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [16804.557583] Call Trace: [16804.558207] __tree_mod_log_rewind+0xbf/0x280 [btrfs] [16804.558835] btrfs_search_old_slot+0x105/0xd00 [btrfs] [16804.559468] resolve_indirect_refs+0x1eb/0xc70 [btrfs] [16804.560087] ? free_extent_buffer.part.19+0x5a/0xc0 [btrfs] [16804.560700] find_parent_nodes+0x388/0x1120 [btrfs] [16804.561310] btrfs_check_shared+0x115/0x1c0 [btrfs] [16804.561916] ? extent_fiemap+0x59d/0x6d0 [btrfs] [16804.562518] extent_fiemap+0x59d/0x6d0 [btrfs] [16804.563112] ? __might_fault+0x11/0x90 [16804.563706] do_vfs_ioctl+0x45a/0x700 [16804.564299] ksys_ioctl+0x70/0x80 [16804.564885] ? trace_hardirqs_off_thunk+0x1a/0x20 [16804.565461] __x64_sys_ioctl+0x16/0x20 [16804.566020] do_syscall_64+0x5c/0x250 [16804.566580] entry_SYSCALL_64_after_hwframe+0x49/0xbe [16804.567153] RIP: 0033:0x7f4b1ba2add7 (...) [16804.568907] RSP: 002b:00007f4b197adc88 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [16804.569513] RAX: ffffffffffffffda RBX: 00007f4b100210d8 RCX: 00007f4b1ba2add7 [16804.570133] RDX: 00007f4b100210d8 RSI: 00000000c020660b RDI: 0000000000000003 [16804.570726] RBP: 000055de05a6cfe0 R08: 0000000000000000 R09: 00007f4b197add44 [16804.571314] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4b197add48 [16804.571905] R13: 00007f4b197add40 R14: 00007f4b100210d0 R15: 00007f4b197add50 (...) [16804.575623] ---[ end trace 87317359aad4ba50 ]--- Fix this by making btrfs_put_tree_mod_seq() skip deletion of elements that have a sequence number equals to the computed minimum sequence number, and not just elements with a sequence number greater then that minimum. Fixes: bd989ba359f2ac ("Btrfs: add tree modification log functions") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04btrfs: abort transaction after failed inode updates in create_subvolJosef Bacik
[ Upstream commit c7e54b5102bf3614cadb9ca32d7be73bad6cecf0 ] We can just abort the transaction here, and in fact do that for every other failure in this function except these two cases. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04btrfs: return error pointer from alloc_test_extent_bufferDan Carpenter
[ Upstream commit b6293c821ea8fa2a631a2112cd86cd435effeb8b ] Callers of alloc_test_extent_buffer have not correctly interpreted the return value as error pointer, as alloc_test_extent_buffer should behave as alloc_extent_buffer. The self-tests were unaffected but btrfs_find_create_tree_block could call both functions and that would cause problems up in the call chain. Fixes: faa2dbf004e8 ("Btrfs: add sanity tests for new qgroup accounting code") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04btrfs: do not call synchronize_srcu() in inode_tree_delJosef Bacik
[ Upstream commit f72ff01df9cf5db25c76674cac16605992d15467 ] Testing with the new fsstress uncovered a pretty nasty deadlock with lookup and snapshot deletion. Process A unlink -> final iput -> inode_tree_del -> synchronize_srcu(subvol_srcu) Process B btrfs_lookup <- srcu_read_lock() acquired here -> btrfs_iget -> find inode that has I_FREEING set -> __wait_on_freeing_inode() We're holding the srcu_read_lock() while doing the iget in order to make sure our fs root doesn't go away, and then we are waiting for the inode to finish freeing. However because the free'ing process is doing a synchronize_srcu() we deadlock. Fix this by dropping the synchronize_srcu() in inode_tree_del(). We don't need people to stop accessing the fs root at this point, we're only adding our empty root to the dead roots list. A larger much more invasive fix is forthcoming to address how we deal with fs roots, but this fixes the immediate problem. Fixes: 76dda93c6ae2 ("Btrfs: add snapshot/subvolume destroy ioctl") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04usb: xhci: Fix build warning seen with CONFIG_PM=nGuenter Roeck
[ Upstream commit 6056a0f8ede27b296d10ef46f7f677cc9d715371 ] The following build warning is seen if CONFIG_PM is disabled. drivers/usb/host/xhci-pci.c:498:13: warning: unused function 'xhci_pci_shutdown' Fixes: f2c710f7dca8 ("usb: xhci: only set D3hot for pci device") Cc: Henry Lin <henryl@nvidia.com> Cc: stable@vger.kernel.org # all stable releases with f2c710f7dca8 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191218011911.6907-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04Revert "mmc: sdhci: Fix incorrect switch to HS mode"Faiz Abbas
commit 07bcc411567cb96f9d1fc84fff8d387118a2920d upstream. This reverts commit c894e33ddc1910e14d6f2a2016f60ab613fd8b37. This commit aims to treat SD High speed and SDR25 as the same while setting UHS Timings in HOST_CONTROL2 which leads to failures with some SD cards in AM65x. Revert this commit. The issue this commit was trying to fix can be implemented in a platform specific callback instead of common sdhci code. Cc: <stable@vger.kernel.org> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20191128110422.25917-1-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04net: phy: initialise phydev speed and duplex sanelyRussell King
[ Upstream commit a5d66f810061e2dd70fb7a108dcd14e535bc639f ] When a phydev is created, the speed and duplex are set to zero and -1 respectively, rather than using the predefined SPEED_UNKNOWN and DUPLEX_UNKNOWN constants. There is a window at initialisation time where we may report link down using the 0/-1 values. Tidy this up and use the predefined constants, so debug doesn't complain with: "Unsupported (update phy-core.c)/Unsupported (update phy-core.c)" when the speed and duplex settings are printed. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04libtraceevent: Fix memory leakage in copy_filter_typeHewenliang
[ Upstream commit 10992af6bf46a2048ad964985a5b77464e5563b1 ] It is necessary to free the memory that we have allocated when error occurs. Fixes: ef3072cd1d5c ("tools lib traceevent: Get rid of die in add_filter_type()") Signed-off-by: Hewenliang <hewenliang4@huawei.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20191119014415.57210-1-hewenliang4@huawei.com Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04crypto: vmx - Avoid weird build failuresMichael Ellerman
[ Upstream commit 4ee812f6143d78d8ba1399671d78c8d78bf2817c ] In the vmx crypto Makefile we assign to a variable called TARGET and pass that to the aesp8-ppc.pl and ghashp8-ppc.pl scripts. The variable is meant to describe what flavour of powerpc we're building for, eg. either 32 or 64-bit, and big or little endian. Unfortunately TARGET is a fairly common name for a make variable, and if it happens that TARGET is specified as a command line parameter to make, the value specified on the command line will override our value. In particular this can happen if the kernel Makefile is driven by an external Makefile that uses TARGET for something. This leads to weird build failures, eg: nonsense at /build/linux/drivers/crypto/vmx/ghashp8-ppc.pl line 45. /linux/drivers/crypto/vmx/Makefile:20: recipe for target 'drivers/crypto/vmx/ghashp8-ppc.S' failed Which shows that we passed an empty value for $(TARGET) to the perl script, confirmed with make V=1: perl /linux/drivers/crypto/vmx/ghashp8-ppc.pl > drivers/crypto/vmx/ghashp8-ppc.S We can avoid this confusion by using override, to tell make that we don't want anything to override our variable, even a value specified on the command line. We can also use a less common name, given the script calls it "flavour", let's use that. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.cCorentin Labbe
[ Upstream commit a7126603d46fe8f01aeedf589e071c6aaa6c6c39 ] If you try to compile this driver on a 64-bit platform then you will get warnings because it mixes size_t with unsigned int which only works on 32-bit. This patch fixes all of the warnings on sun4i-ss-hash.c. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04fbtft: Make sure string is NULL terminatedAndy Shevchenko
[ Upstream commit 21f585480deb4bcf0d92b08879c35d066dfee030 ] New GCC warns about inappropriate use of strncpy(): drivers/staging/fbtft/fbtft-core.c: In function ‘fbtft_framebuffer_alloc’: drivers/staging/fbtft/fbtft-core.c:665:2: warning: ‘strncpy’ specified bound 16 equals destination size [-Wstringop-truncation] 665 | strncpy(info->fix.id, dev->driver->name, 16); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Later on the copy is being used with the assumption to be NULL terminated. Make sure string is NULL terminated by switching to snprintf(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20191120095716.26628-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04iwlwifi: check kasprintf() return valueJohannes Berg
[ Upstream commit 5974fbb5e10b018fdbe3c3b81cb4cc54e1105ab9 ] kasprintf() can fail, we should check the return value. Fixes: 5ed540aecc2a ("iwlwifi: use mac80211 throughput trigger") Fixes: 8ca151b568b6 ("iwlwifi: add the MVM driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04btrfs: don't prematurely free work in end_workqueue_fn()Omar Sandoval
[ Upstream commit 9be490f1e15c34193b1aae17da58e14dd9f55a95 ] Currently, end_workqueue_fn() frees the end_io_wq entry (which embeds the work item) and then calls bio_endio(). This is another potential instance of the bug in "btrfs: don't prematurely free work in run_ordered_work()". In particular, the endio call may depend on other work items. For example, btrfs_end_dio_bio() can call btrfs_subio_endio_read() -> __btrfs_correct_data_nocsum() -> dio_read_error() -> submit_dio_repair_bio(), which submits a bio that is also completed through a end_workqueue_fn() work item. However, __btrfs_correct_data_nocsum() waits for the newly submitted bio to complete, thus it depends on another work item. This example currently usually works because we use different workqueue helper functions for BTRFS_WQ_ENDIO_DATA and BTRFS_WQ_ENDIO_DIO_REPAIR. However, it may deadlock with stacked filesystems and is fragile overall. The proper fix is to free the work item at the very end of the work function, so let's do that. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04spi: tegra20-slink: add missed clk_unprepareChuhong Yuan
[ Upstream commit 04358e40ba96d687c0811c21d9dede73f5244a98 ] The driver misses calling clk_unprepare in probe failure and remove. Add the calls to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191115083122.12278-1-hslester96@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04x86/crash: Add a forward declaration of struct kimageLianbo Jiang
[ Upstream commit 112eee5d06007dae561f14458bde7f2a4879ef4e ] Add a forward declaration of struct kimage to the crash.h header because future changes will invoke a crash-specific function from the realmode init path and the compiler will complain otherwise like this: In file included from arch/x86/realmode/init.c:11: ./arch/x86/include/asm/crash.h:5:32: warning: ‘struct kimage’ declared inside\ parameter list will not be visible outside of this definition or declaration 5 | int crash_load_segments(struct kimage *image); | ^~~~~~ ./arch/x86/include/asm/crash.h:6:37: warning: ‘struct kimage’ declared inside\ parameter list will not be visible outside of this definition or declaration 6 | int crash_copy_backup_region(struct kimage *image); | ^~~~~~ ./arch/x86/include/asm/crash.h:7:39: warning: ‘struct kimage’ declared inside\ parameter list will not be visible outside of this definition or declaration 7 | int crash_setup_memmap_entries(struct kimage *image, | [ bp: Rewrite the commit message. ] Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: bhe@redhat.com Cc: d.hatayama@fujitsu.com Cc: dhowells@redhat.com Cc: dyoung@redhat.com Cc: ebiederm@xmission.com Cc: horms@verge.net.au Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jürgen Gross <jgross@suse.com> Cc: kexec@lists.infradead.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: vgoyal@redhat.com Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20191108090027.11082-4-lijiang@redhat.com Link: https://lkml.kernel.org/r/201910310233.EJRtTMWP%25lkp@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04cpufreq: Register drivers only after CPU devices have been registeredViresh Kumar
[ Upstream commit 46770be0cf94149ca48be87719bda1d951066644 ] The cpufreq core heavily depends on the availability of the struct device for CPUs and if they aren't available at the time cpufreq driver is registered, we will never succeed in making cpufreq work. This happens due to following sequence of events: - cpufreq_register_driver() - subsys_interface_register() - return 0; //successful registration of driver ... at a later point of time - register_cpu(); - device_register(); - bus_probe_device(); - sif->add_dev(); - cpufreq_add_dev(); - get_cpu_device(); //FAILS - per_cpu(cpu_sys_devices, num) = &cpu->dev; //used by get_cpu_device() - return 0; //CPU registered successfully Because the per-cpu variable cpu_sys_devices is set only after the CPU device is regsitered, cpufreq will never be able to get it when cpufreq_add_dev() is called. This patch avoids this failure by making sure device structure of at least CPU0 is available when the cpufreq driver is registered, else return -EPROBE_DEFER. Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org> Co-developed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04parport: load lowlevel driver if ports not foundSudip Mukherjee
[ Upstream commit 231ec2f24dad18d021b361045bbd618ba62a274e ] Usually all the distro will load the parport low level driver as part of their initialization. But we can get into a situation where all the parallel port drivers are built as module and we unload all the modules at a later time. Then if we just do "modprobe parport" it will only load the parport module and will not load the low level driver which will actually register the ports. So, check the bus if there is any parport registered, if not, load the low level driver. We can get into the above situation with all distro but only Suse has setup the alias for "parport_lowlevel" and so it only works in Suse. Users of Debian based distro will need to load the lowlevel module manually. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20191016144540.18810-3-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04ASoC: rt5677: Mark reg RT5677_PWR_ANLG2 as volatileBen Zhang
[ Upstream commit eabf424f7b60246c76dcb0ea6f1e83ef9abbeaa6 ] The codec dies when RT5677_PWR_ANLG2(MX-64h) is set to 0xACE1 while it's streaming audio over SPI. The DSP firmware turns on PLL2 (MX-64 bit 8) when SPI streaming starts. However regmap does not believe that register can change by itself. When BST1 (bit 15) is turned on with regmap_update_bits(), it doesn't read the register first before write, so PLL2 power bit is cleared by accident. Marking MX-64h as volatile in regmap solved the issue. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-6-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04spi: pxa2xx: Add missed security checksChuhong Yuan
[ Upstream commit 5eb263ef08b5014cfc2539a838f39d2fd3531423 ] pxa2xx_spi_init_pdata misses checks for devm_clk_get and platform_get_irq. Add checks for them to fix the bugs. Since ssp->clk and ssp->irq are used in probe, they are mandatory here. So we cannot use _optional() for devm_clk_get and platform_get_irq. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191109080943.30428-1-hslester96@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04EDAC/ghes: Fix grain calculationRobert Richter
[ Upstream commit 7088e29e0423d3195e09079b4f849ec4837e5a75 ] The current code to convert a physical address mask to a grain (defined as granularity in bytes) is: e->grain = ~(mem_err->physical_addr_mask & ~PAGE_MASK); This is broken in several ways: 1) It calculates to wrong grain values. E.g., a physical address mask of ~0xfff should give a grain of 0x1000. Without considering PAGE_MASK, there is an off-by-one. Things are worse when also filtering it with ~PAGE_MASK. This will calculate to a grain with the upper bits set. In the example it even calculates to ~0. 2) The grain does not depend on and is unrelated to the kernel's page-size. The page-size only matters when unmapping memory in memory_failure(). Smaller grains are wrongly rounded up to the page-size, on architectures with a configurable page-size (e.g. arm64) this could round up to the even bigger page-size of the hypervisor. Fix this with: e->grain = ~mem_err->physical_addr_mask + 1; The grain_bits are defined as: grain = 1 << grain_bits; Change also the grain_bits calculation accordingly, it is the same formula as in edac_mc.c now and the code can be unified. The value in ->physical_addr_mask coming from firmware is assumed to be contiguous, but this is not sanity-checked. However, in case the mask is non-contiguous, a conversion to grain_bits effectively converts the grain bit mask to a power of 2 by rounding it up. Suggested-by: James Morse <james.morse@arm.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106093239.25517-11-rrichter@marvell.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04media: si470x-i2c: add missed operations in removeChuhong Yuan
[ Upstream commit 2df200ab234a86836a8879a05a8007d6b884eb14 ] The driver misses calling v4l2_ctrl_handler_free and v4l2_device_unregister in remove like what is done in probe failure. Add the calls to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04media: pvrusb2: Fix oops on tear-down when radio support is not presentMike Isely
[ Upstream commit 7f404ae9cf2a285f73b3c18ab9303d54b7a3d8e1 ] In some device configurations there's no radio or radio support in the driver. That's OK, as the driver sets itself up accordingly. However on tear-down in these caes it's still trying to tear down radio related context when there isn't anything there, leading to dereferences through a null pointer and chaos follows. How this bug survived unfixed for 11 years in the pvrusb2 driver is a mystery to me. [hverkuil: fix two checkpatch warnings] Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04ath10k: fix get invalid tx rate for Mesh metricMiaoqing Pan
[ Upstream commit 05a11003a56507023f18d3249a4d4d119c0a3e9c ] ath10k does not provide transmit rate info per MSDU in tx completion, mark that as -1 so mac80211 will ignore the rates. This fixes mac80211 update Mesh link metric with invalid transmit rate info. Tested HW: QCA9984 Tested FW: 10.4-3.9.0.2-00035 Signed-off-by: Hou Bao Hou <houbao@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04perf probe: Filter out instances except for inlined subroutine and subprogramMasami Hiramatsu
[ Upstream commit da6cb952a89efe24bb76c4971370d485737a2d85 ] Filter out instances except for inlined_subroutine and subprogram DIE in die_walk_instances() and die_is_func_instance(). This fixes an issue that perf probe sets some probes on calling address instead of a target function itself. When perf probe walks on instances of an abstruct origin (a kind of function prototype of inlined function), die_walk_instances() can also pass a GNU_call_site (a GNU extension for call site) to callback. Since it is not an inlined instance of target function, we have to filter out when searching a probe point. Without this patch, perf probe sets probes on call site address too.This can happen on some function which is marked "inlined", but has actual symbol. (I'm not sure why GCC mark it "inlined"): # perf probe -D vfs_read p:probe/vfs_read _text+2500017 p:probe/vfs_read_1 _text+2499468 p:probe/vfs_read_2 _text+2499563 p:probe/vfs_read_3 _text+2498876 p:probe/vfs_read_4 _text+2498512 p:probe/vfs_read_5 _text+2498627 With this patch: Slightly different results, similar tho: # perf probe -D vfs_read p:probe/vfs_read _text+2498512 Committer testing: # uname -a Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux Before: # perf probe -D vfs_read p:probe/vfs_read _text+3131557 p:probe/vfs_read_1 _text+3130975 p:probe/vfs_read_2 _text+3131047 p:probe/vfs_read_3 _text+3130380 p:probe/vfs_read_4 _text+3130000 # uname -a Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux # After: # perf probe -D vfs_read p:probe/vfs_read _text+3130000 # Fixes: db0d2c6420ee ("perf probe: Search concrete out-of-line instances") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/157241937063.32002.11024544873990816590.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-30 16:55:21 +0000