summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-06-13isdn: eicon: fix a missing-check bugWenwen Wang
[ Upstream commit 6009d1fe6ba3bb2dab55921da60465329cc1cd89 ] In divasmain.c, the function divas_write() firstly invokes the function diva_xdi_open_adapter() to open the adapter that matches with the adapter number provided by the user, and then invokes the function diva_xdi_write() to perform the write operation using the matched adapter. The two functions diva_xdi_open_adapter() and diva_xdi_write() are located in diva.c. In diva_xdi_open_adapter(), the user command is copied to the object 'msg' from the userspace pointer 'src' through the function pointer 'cp_fn', which eventually calls copy_from_user() to do the copy. Then, the adapter number 'msg.adapter' is used to find out a matched adapter from the 'adapter_queue'. A matched adapter will be returned if it is found. Otherwise, NULL is returned to indicate the failure of the verification on the adapter number. As mentioned above, if a matched adapter is returned, the function diva_xdi_write() is invoked to perform the write operation. In this function, the user command is copied once again from the userspace pointer 'src', which is the same as the 'src' pointer in diva_xdi_open_adapter() as both of them are from the 'buf' pointer in divas_write(). Similarly, the copy is achieved through the function pointer 'cp_fn', which finally calls copy_from_user(). After the successful copy, the corresponding command processing handler of the matched adapter is invoked to perform the write operation. It is obvious that there are two copies here from userspace, one is in diva_xdi_open_adapter(), and one is in diva_xdi_write(). Plus, both of these two copies share the same source userspace pointer, i.e., the 'buf' pointer in divas_write(). Given that a malicious userspace process can race to change the content pointed by the 'buf' pointer, this can pose potential security issues. For example, in the first copy, the user provides a valid adapter number to pass the verification process and a valid adapter can be found. Then the user can modify the adapter number to an invalid number. This way, the user can bypass the verification process of the adapter number and inject inconsistent data. This patch reuses the data copied in diva_xdi_open_adapter() and passes it to diva_xdi_write(). This way, the above issues can be avoided. Signed-off-by: Wenwen Wang <wang6495@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-13ipv4: remove warning in ip_recv_errorWillem de Bruijn
[ Upstream commit 730c54d59403658a62af6517338fa8d4922c1b28 ] A precondition check in ip_recv_error triggered on an otherwise benign race. Remove the warning. The warning triggers when passing an ipv6 socket to this ipv4 error handling function. RaceFuzzer was able to trigger it due to a race in setsockopt IPV6_ADDRFORM. --- CPU0 do_ipv6_setsockopt sk->sk_socket->ops = &inet_dgram_ops; --- CPU1 sk->sk_prot->recvmsg udp_recvmsg ip_recv_error WARN_ON_ONCE(sk->sk_family == AF_INET6); --- CPU0 do_ipv6_setsockopt sk->sk_family = PF_INET; This socket option converts a v6 socket that is connected to a v4 peer to an v4 socket. It updates the socket on the fly, changing fields in sk as well as other structs. This is inherently non-atomic. It races with the lockless udp_recvmsg path. No other code makes an assumption that these fields are updated atomically. It is benign here, too, as ip_recv_error cares only about the protocol of the skbs enqueued on the error queue, for which sk_family is not a precise predictor (thanks to another isue with IPV6_ADDRFORM). Link: http://lkml.kernel.org/r/20180518120826.GA19515@dragonet.kaist.ac.kr Fixes: 7ce875e5ecb8 ("ipv4: warn once on passing AF_INET6 socket to ip_recv_error") Reported-by: DaeRyong Jeong <threeearcat@gmail.com> Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-13ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeedsSabrina Dubroca
[ Upstream commit 848235edb5c93ed086700584c8ff64f6d7fc778d ] Currently, raw6_sk(sk)->ip6mr_table is set unconditionally during ip6_mroute_setsockopt(MRT6_TABLE). A subsequent attempt at the same setsockopt will fail with -ENOENT, since we haven't actually created that table. A similar fix for ipv4 was included in commit 5e1859fbcc3c ("ipv4: ipmr: various fixes and cleanups"). Fixes: d1db275dd3f6 ("ipv6: ip6mr: support multiple tables") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-13enic: set DMA mask to 47 bitGovindarajulu Varadarajan
[ Upstream commit 322eaa06d55ebc1402a4a8d140945cff536638b4 ] In commit 624dbf55a359b ("driver/net: enic: Try DMA 64 first, then failover to DMA") DMA mask was changed from 40 bits to 64 bits. Hardware actually supports only 47 bits. Fixes: 624dbf55a359b ("driver/net: enic: Try DMA 64 first, then failover to DMA") Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-13dccp: don't free ccid2_hc_tx_sock struct in dccp_disconnect()Alexey Kodanev
[ Upstream commit 2677d20677314101293e6da0094ede7b5526d2b1 ] Syzbot reported the use-after-free in timer_is_static_object() [1]. This can happen because the structure for the rto timer (ccid2_hc_tx_sock) is removed in dccp_disconnect(), and ccid2_hc_tx_rto_expire() can be called after that. The report [1] is similar to the one in commit 120e9dabaf55 ("dccp: defer ccid_hc_tx_delete() at dismantle time"). And the fix is the same, delay freeing ccid2_hc_tx_sock structure, so that it is freed in dccp_sk_destruct(). [1] ================================================================== BUG: KASAN: use-after-free in timer_is_static_object+0x80/0x90 kernel/time/timer.c:607 Read of size 8 at addr ffff8801bebb5118 by task syz-executor2/25299 CPU: 1 PID: 25299 Comm: syz-executor2 Not tainted 4.17.0-rc5+ #54 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 timer_is_static_object+0x80/0x90 kernel/time/timer.c:607 debug_object_activate+0x2d9/0x670 lib/debugobjects.c:508 debug_timer_activate kernel/time/timer.c:709 [inline] debug_activate kernel/time/timer.c:764 [inline] __mod_timer kernel/time/timer.c:1041 [inline] mod_timer+0x4d3/0x13b0 kernel/time/timer.c:1102 sk_reset_timer+0x22/0x60 net/core/sock.c:2742 ccid2_hc_tx_rto_expire+0x587/0x680 net/dccp/ccids/ccid2.c:147 call_timer_fn+0x230/0x940 kernel/time/timer.c:1326 expire_timers kernel/time/timer.c:1363 [inline] __run_timers+0x79e/0xc50 kernel/time/timer.c:1666 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1d1/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:525 [inline] smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863 </IRQ> ... Allocated by task 25374: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490 kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554 ccid_new+0x25b/0x3e0 net/dccp/ccid.c:151 dccp_hdlr_ccid+0x27/0x150 net/dccp/feat.c:44 __dccp_feat_activate+0x184/0x270 net/dccp/feat.c:344 dccp_feat_activate_values+0x3a7/0x819 net/dccp/feat.c:1538 dccp_create_openreq_child+0x472/0x610 net/dccp/minisocks.c:128 dccp_v4_request_recv_sock+0x12c/0xca0 net/dccp/ipv4.c:408 dccp_v6_request_recv_sock+0x125d/0x1f10 net/dccp/ipv6.c:415 dccp_check_req+0x455/0x6a0 net/dccp/minisocks.c:197 dccp_v4_rcv+0x7b8/0x1f3f net/dccp/ipv4.c:841 ip_local_deliver_finish+0x2e3/0xd80 net/ipv4/ip_input.c:215 NF_HOOK include/linux/netfilter.h:288 [inline] ip_local_deliver+0x1e1/0x720 net/ipv4/ip_input.c:256 dst_input include/net/dst.h:450 [inline] ip_rcv_finish+0x81b/0x2200 net/ipv4/ip_input.c:396 NF_HOOK include/linux/netfilter.h:288 [inline] ip_rcv+0xb70/0x143d net/ipv4/ip_input.c:492 __netif_receive_skb_core+0x26f5/0x3630 net/core/dev.c:4592 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4657 process_backlog+0x219/0x760 net/core/dev.c:5337 napi_poll net/core/dev.c:5735 [inline] net_rx_action+0x7b7/0x1930 net/core/dev.c:5801 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285 Freed by task 25374: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kmem_cache_free+0x86/0x2d0 mm/slab.c:3756 ccid_hc_tx_delete+0xc3/0x100 net/dccp/ccid.c:190 dccp_disconnect+0x130/0xc66 net/dccp/proto.c:286 dccp_close+0x3bc/0xe60 net/dccp/proto.c:1045 inet_release+0x104/0x1f0 net/ipv4/af_inet.c:427 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:460 sock_release+0x96/0x1b0 net/socket.c:594 sock_close+0x16/0x20 net/socket.c:1149 __fput+0x34d/0x890 fs/file_table.c:209 ____fput+0x15/0x20 fs/file_table.c:243 task_work_run+0x1e4/0x290 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:191 [inline] exit_to_usermode_loop+0x2bd/0x310 arch/x86/entry/common.c:166 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:265 [inline] do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8801bebb4cc0 which belongs to the cache ccid2_hc_tx_sock of size 1240 The buggy address is located 1112 bytes inside of 1240-byte region [ffff8801bebb4cc0, ffff8801bebb5198) The buggy address belongs to the page: page:ffffea0006faed00 count:1 mapcount:0 mapping:ffff8801bebb41c0 index:0xffff8801bebb5240 compound_mapcount: 0 flags: 0x2fffc0000008100(slab|head) raw: 02fffc0000008100 ffff8801bebb41c0 ffff8801bebb5240 0000000100000003 raw: ffff8801cdba3138 ffffea0007634120 ffff8801cdbaab40 0000000000000000 page dumped because: kasan: bad access detected ... ================================================================== Reported-by: syzbot+5d47e9ec91a6f15dbd6f@syzkaller.appspotmail.com Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-13bnx2x: use the right constantJulia Lawall
[ Upstream commit dd612f18a49b63af8b3a5f572d999bdb197385bc ] Nearby code that also tests port suggests that the P0 constant should be used when port is zero. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1; @@ * e ? e1 : e1 // </smpl> Fixes: 6c3218c6f7e5 ("bnx2x: Adjust ETS to 578xx") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-13drm: set FMODE_UNSIGNED_OFFSET for drm filesDave Airlie
commit 76ef6b28ea4f81c3d511866a9b31392caa833126 upstream. Since we have the ttm and gem vma managers using a subset of the file address space for objects, and these start at 0x100000000 they will overflow the new mmap checks. I've checked all the mmap routines I could see for any bad behaviour but overall most people use GEM/TTM VMA managers even the legacy drivers have a hashtable. Reported-and-Tested-by: Arthur Marsh (amarsh04 on #radeon) Fixes: be83bbf8068 (mmap: introduce sane default mmap limits) Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-13kconfig: Avoid format overflow warning from GCC 8.1Nathan Chancellor
commit 2ae89c7a82ea9d81a19b4fc2df23bef4b112f24e upstream. In file included from scripts/kconfig/zconf.tab.c:2485: scripts/kconfig/confdata.c: In function ‘conf_write’: scripts/kconfig/confdata.c:773:22: warning: ‘%s’ directive writing likely 7 or more bytes into a region of size between 1 and 4097 [-Wformat-overflow=] sprintf(newname, "%s%s", dirname, basename); ^~ scripts/kconfig/confdata.c:773:19: note: assuming directive output of 7 bytes sprintf(newname, "%s%s", dirname, basename); ^~~~~~ scripts/kconfig/confdata.c:773:2: note: ‘sprintf’ output 1 or more bytes (assuming 4104) into a destination of size 4097 sprintf(newname, "%s%s", dirname, basename); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ scripts/kconfig/confdata.c:776:23: warning: ‘.tmpconfig.’ directive writing 11 bytes into a region of size between 1 and 4097 [-Wformat-overflow=] sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid()); ^~~~~~~~~~~ scripts/kconfig/confdata.c:776:3: note: ‘sprintf’ output between 13 and 4119 bytes into a destination of size 4097 sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid()); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Increase the size of tmpname and newname to make GCC happy. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-13btrfs: define SUPER_FLAG_METADUMP_V2Anand Jain
commit e2731e55884f2138a252b0a3d7b24d57e49c3c59 upstream. btrfs-progs uses super flag bit BTRFS_SUPER_FLAG_METADUMP_V2 (1ULL << 34). So just define that in kernel so that we know its been used. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-13mmap: relax file size limit for regular filesLinus Torvalds
commit 423913ad4ae5b3e8fb8983f70969fb522261ba26 upstream. Commit be83bbf80682 ("mmap: introduce sane default mmap limits") was introduced to catch problems in various ad-hoc character device drivers doing mmap and getting the size limits wrong. In the process, it used "known good" limits for the normal cases of mapping regular files and block device drivers. It turns out that the "s_maxbytes" limit was less "known good" than I thought. In particular, /proc doesn't set it, but exposes one regular file to mmap: /proc/vmcore. As a result, that file got limited to the default MAX_INT s_maxbytes value. This went unnoticed for a while, because apparently the only thing that needs it is the s390 kernel zfcpdump, but there might be other tools that use this too. Vasily suggested just changing s_maxbytes for all of /proc, which isn't wrong, but makes me nervous at this stage. So instead, just make the new mmap limit always be MAX_LFS_FILESIZE for regular files, which won't affect anything else. It wasn't the regular file case I was worried about. I'd really prefer for maxsize to have been per-inode, but that is not how things are today. Fixes: be83bbf80682 ("mmap: introduce sane default mmap limits") Reported-by: Vasily Gorbik <gor@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-13mmap: introduce sane default mmap limitsLinus Torvalds
commit be83bbf806822b1b89e0a0f23cd87cddc409e429 upstream. The internal VM "mmap()" interfaces are based on the mmap target doing everything using page indexes rather than byte offsets, because traditionally (ie 32-bit) we had the situation that the byte offset didn't fit in a register. So while the mmap virtual address was limited by the word size of the architecture, the backing store was not. So we're basically passing "pgoff" around as a page index, in order to be able to describe backing store locations that are much bigger than the word size (think files larger than 4GB etc). But while this all makes a ton of sense conceptually, we've been dogged by various drivers that don't really understand this, and internally work with byte offsets, and then try to work with the page index by turning it into a byte offset with "pgoff << PAGE_SHIFT". Which obviously can overflow. Adding the size of the mapping to it to get the byte offset of the end of the backing store just exacerbates the problem, and if you then use this overflow-prone value to check various limits of your device driver mmap capability, you're just setting yourself up for problems. The correct thing for drivers to do is to do their limit math in page indices, the way the interface is designed. Because the generic mmap code _does_ test that the index doesn't overflow, since that's what the mmap code really cares about. HOWEVER. Finding and fixing various random drivers is a sisyphean task, so let's just see if we can just make the core mmap() code do the limiting for us. Realistically, the only "big" backing stores we need to care about are regular files and block devices, both of which are known to do this properly, and which have nice well-defined limits for how much data they can access. So let's special-case just those two known cases, and then limit other random mmap users to a backing store that still fits in "unsigned long". Realistically, that's not much of a limit at all on 64-bit, and on 32-bit architectures the only worry might be the GPU drivers, which can have big physical address spaces. To make it possible for drivers like that to say that they are 64-bit clean, this patch does repurpose the "FMODE_UNSIGNED_OFFSET" bit in the file flags to allow drivers to mark their file descriptors as safe in the full 64-bit mmap address space. [ The timing for doing this is less than optimal, and this should really go in a merge window. But realistically, this needs wide testing more than it needs anything else, and being main-line is the only way to do that. So the earlier the better, even if it's outside the proper development cycle - Linus ] Cc: Kees Cook <keescook@chromium.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Willy Tarreau <w@1wt.eu> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-13tpm: self test failure should not cause suspend to failChris Chiu
commit 0803d7befa15cab5717d667a97a66214d2a4c083 upstream. The Acer Acer Veriton X4110G has a TPM device detected as: tpm_tis 00:0b: 1.2 TPM (device-id 0xFE, rev-id 71) After the first S3 suspend, the following error appears during resume: tpm tpm0: A TPM error(38) occurred continue selftest Any following S3 suspend attempts will now fail with this error: tpm tpm0: Error (38) sending savestate before suspend PM: Device 00:0b failed to suspend: error 38 Error 38 is TPM_ERR_INVALID_POSTINIT which means the TPM is not in the correct state. This indicates that the platform BIOS is not sending the usual TPM_Startup command during S3 resume. >From this point onwards, all TPM commands will fail. The same issue was previously reported on Foxconn 6150BK8MC and Sony Vaio TX3. The platform behaviour seems broken here, but we should not break suspend/resume because of this. When the unexpected TPM state is encountered, set a flag to skip the affected TPM_SaveState command on later suspends. Cc: stable@vger.kernel.org Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Daniel Drake <drake@endlessm.com> Link: http://lkml.kernel.org/r/CAB4CAwfSCvj1cudi+MWaB5g2Z67d9DwY1o475YOZD64ma23UiQ@mail.gmail.com Link: https://lkml.org/lkml/2011/3/28/192 Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=591031 Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-13tpm: do not suspend/resume if power stays onEnric Balletbo i Serra
commit b5d0ebc99bf5d0801a5ecbe958caa3d68b8eaee8 upstream. The suspend/resume behavior of the TPM can be controlled by setting "powered-while-suspended" in the DTS. This is useful for the cases when hardware does not power-off the TPM. Signed-off-by: Sonny Rao <sonnyrao@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06Linux 4.9.107v4.9.107Greg Kroah-Hartman
2018-06-06serial: pl011: add console matching functionAleksey Makarov
commit 10879ae5f12e9cab3c4e8e9504c1aaa8a033bde7 upstream. This patch adds function pl011_console_match() that implements method match of struct console. It allows to match consoles against data specified in a string, for example taken from command line or compiled by ACPI SPCR table handler. This patch was merged to tty-next but then reverted because of conflict with commit 46e36683f433 ("serial: earlycon: Extend earlycon command line option to support 64-bit addresses") Now it is fixed. Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06sparc64: Don't clibber fixed registers in __multi4.David S. Miller
commit 79db795833bf5c3e798bcd7a5aeeee3fb0505927 upstream. %g4 and %g5 are fixed registers used by the kernel for the thread pointer and the per-cpu offset. Use %o4 and %g7 instead. Diagnosis by Anthony Yznaga. Fixes: 1b4af13ff2cc ("sparc64: Add __multi3 for gcc 7.x and later.") Reported-by: Anatoly Pugachev <matorola@gmail.com> Tested-by: Anatoly Pugachev <matorola@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06mm: fix the NULL mapping case in __isolate_lru_page()Hugh Dickins
commit 145e1a71e090575c74969e3daa8136d1e5b99fc8 upstream. George Boole would have noticed a slight error in 4.16 commit 69d763fc6d3a ("mm: pin address_space before dereferencing it while isolating an LRU page"). Fix it, to match both the comment above it, and the original behaviour. Although anonymous pages are not marked PageDirty at first, we have an old habit of calling SetPageDirty when a page is removed from swap cache: so there's a category of ex-swap pages that are easily migratable, but were inadvertently excluded from compaction's async migration in 4.16. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1805302014001.12558@eggly.anvils Fixes: 69d763fc6d3a ("mm: pin address_space before dereferencing it while isolating an LRU page") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Reported-by: Ivan Kalvachev <ikalvachev@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06fix io_destroy()/aio_complete() raceAl Viro
commit 4faa99965e027cc057c5145ce45fa772caa04e8d upstream. If io_destroy() gets to cancelling everything that can be cancelled and gets to kiocb_cancel() calling the function driver has left in ->ki_cancel, it becomes vulnerable to a race with IO completion. At that point req is already taken off the list and aio_complete() does *NOT* spin until we (in free_ioctx_users()) releases ->ctx_lock. As the result, it proceeds to kiocb_free(), freing req just it gets passed to ->ki_cancel(). Fix is simple - remove from the list after the call of kiocb_cancel(). All instances of ->ki_cancel() already have to cope with the being called with iocb still on list - that's what happens in io_cancel(2). Cc: stable@kernel.org Fixes: 0460fef2a921 "aio: use cancellation list lazily" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06sparc64: Fix build warnings with gcc 7.David S. Miller
commit 0fde7ad71ee371ede73b3f326e58f9e8d102feb6 upstream. arch/sparc/kernel/ds.c: In function ‘register_services’: arch/sparc/kernel/ds.c:912:3: error: ‘strcpy’: writing at least 1 byte into a region of size 0 overflows the destination Reported-by: Anatoly Pugachev <matorola@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06drm/i915: Disable LVDS on Radiant P845Ondrej Zary
commit b3fb22733ae61050f8d10a1d6a8af176c5c5db1a upstream. Radiant P845 does not have LVDS, only VGA. Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105468 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180309222204.4771-1-linux@rainbow-software.org (cherry picked from commit 7f7105f99b75aca4f8c2a748ed6b82c7f8be3293) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06drm/psr: Fix missed entry in PSR setup time table.Dhinakaran Pandiyan
commit bdcc02cf1bb508fc700df7662f55058f651f2621 upstream. Entry corresponding to 220 us setup time was missing. I am not aware of any specific bug this fixes, but this could potentially result in enabling PSR on a panel with a higher setup time requirement than supported by the hardware. I verified the value is present in eDP spec versions 1.3, 1.4 and 1.4a. Fixes: 6608804b3d7f ("drm/dp: Add drm_dp_psr_setup_time()") Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jose Roberto de Souza <jose.souza@intel.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Tarun Vyas <tarun.vyas@intel.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180511195145.3829-3-dhinakaran.pandiyan@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06IB/core: Fix error code for invalid GID entryParav Pandit
commit a840c93ca7582bb6c88df2345a33f979b7a67874 upstream. When a GID entry is invalid EAGAIN is returned. This is an incorrect error code, there is nothing that will make this GID entry valid again in bounded time. Some user space tools fail incorrectly if EAGAIN is returned here, and this represents a small ABI change from earlier kernels. The first patch in the Fixes list makes entries that were valid before to become invalid, allowing this code to trigger, while the second patch in the Fixes list introduced the wrong EAGAIN. Therefore revert the return result to EINVAL which matches the historical expectations of the ibv_query_gid_type() API of the libibverbs user space library. Cc: <stable@vger.kernel.org> Fixes: 598ff6bae689 ("IB/core: Refactor GID modify code for RoCE") Fixes: 03db3a2d81e6 ("IB/core: Add RoCE GID table management") Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06hwtracing: stm: fix build error on some archesGreg Kroah-Hartman
commit 806e30873f0e74d9d41b0ef761bd4d3e55c7d510 upstream. Commit b5e2ced9bf81 ("stm class: Use vmalloc for the master map") caused a build error on some arches as vmalloc.h was not explicitly included. Fix that by adding it to the list of includes. Fixes: b5e2ced9bf81 ("stm class: Use vmalloc for the master map") Reported-by: kbuild test robot <lkp@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06stm class: Use vmalloc for the master mapAlexander Shishkin
commit b5e2ced9bf81393034072dd4d372f6b430bc1f0a upstream. Fengguang is running into a warning from the buddy allocator: > swapper/0: page allocation failure: order:9, mode:0x14040c0(GFP_KERNEL|__GFP_COMP), nodemask=(null) > CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.17.0-rc1 #262 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 > Call Trace: ... > __kmalloc+0x14b/0x180: ____cache_alloc at mm/slab.c:3127 > stm_register_device+0xf3/0x5c0: stm_register_device at drivers/hwtracing/stm/core.c:695 ... Which is basically a result of the stm class trying to allocate ~512kB for the dummy_stm with its default parameters. There's no reason, however, for it not to be vmalloc()ed instead, which is what this patch does. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> CC: stable@vger.kernel.org # v4.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06scsi: scsi_transport_srp: Fix shost to rport translationBart Van Assche
commit c9ddf73476ff4fffb7a87bd5107a0705bf2cf64b upstream. Since an SRP remote port is attached as a child to shost->shost_gendev and as the only child, the translation from the shost pointer into an rport pointer must happen by looking up the shost child that is an rport. This patch fixes the following KASAN complaint: BUG: KASAN: slab-out-of-bounds in srp_timed_out+0x57/0x110 [scsi_transport_srp] Read of size 4 at addr ffff880035d3fcc0 by task kworker/1:0H/19 CPU: 1 PID: 19 Comm: kworker/1:0H Not tainted 4.16.0-rc3-dbg+ #1 Workqueue: kblockd blk_mq_timeout_work Call Trace: dump_stack+0x85/0xc7 print_address_description+0x65/0x270 kasan_report+0x231/0x350 srp_timed_out+0x57/0x110 [scsi_transport_srp] scsi_times_out+0xc7/0x3f0 [scsi_mod] blk_mq_terminate_expired+0xc2/0x140 bt_iter+0xbc/0xd0 blk_mq_queue_tag_busy_iter+0x1c7/0x350 blk_mq_timeout_work+0x325/0x3f0 process_one_work+0x441/0xa50 worker_thread+0x76/0x6c0 kthread+0x1b2/0x1d0 ret_from_fork+0x24/0x30 Fixes: e68ca75200fe ("scsi_transport_srp: Reduce failover time") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Laurence Oberman <loberman@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06MIPS: prctl: Disallow FRE without FR with PR_SET_FP_MODE requestsMaciej W. Rozycki
commit 28e4213dd331e944e7fca1954a946829162ed9d4 upstream. Having PR_FP_MODE_FRE (i.e. Config5.FRE) set without PR_FP_MODE_FR (i.e. Status.FR) is not supported as the lone purpose of Config5.FRE is to emulate Status.FR=0 handling on FPU hardware that has Status.FR=1 hardwired[1][2]. Also we do not handle this case elsewhere, and assume throughout our code that TIF_HYBRID_FPREGS and TIF_32BIT_FPREGS cannot be set both at once for a task, leading to inconsistent behaviour if this does happen. Return unsuccessfully then from prctl(2) PR_SET_FP_MODE calls requesting PR_FP_MODE_FRE to be set with PR_FP_MODE_FR clear. This corresponds to modes allowed by `mips_set_personality_fp'. References: [1] "MIPS Architecture For Programmers, Vol. III: MIPS32 / microMIPS32 Privileged Resource Architecture", Imagination Technologies, Document Number: MD00090, Revision 6.02, July 10, 2015, Table 9.69 "Config5 Register Field Descriptions", p. 262 [2] "MIPS Architecture For Programmers, Volume III: MIPS64 / microMIPS64 Privileged Resource Architecture", Imagination Technologies, Document Number: MD00091, Revision 6.03, December 22, 2015, Table 9.72 "Config5 Register Field Descriptions", p. 288 Fixes: 9791554b45a2 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS") Signed-off-by: Maciej W. Rozycki <macro@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.0+ Patchwork: https://patchwork.linux-mips.org/patch/19327/ Signed-off-by: James Hogan <jhogan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06MIPS: ptrace: Fix PTRACE_PEEKUSR requests for 64-bit FGRsMaciej W. Rozycki
commit c7e814628df65f424fe197dde73bfc67e4a244d7 upstream. Use 64-bit accesses for 64-bit floating-point general registers with PTRACE_PEEKUSR, removing the truncation of their upper halves in the FR=1 mode, caused by commit bbd426f542cb ("MIPS: Simplify FP context access"), which inadvertently switched them to using 32-bit accesses. The PTRACE_POKEUSR side is fine as it's never been broken and continues using 64-bit accesses. Fixes: bbd426f542cb ("MIPS: Simplify FP context access") Signed-off-by: Maciej W. Rozycki <macro@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.15+ Patchwork: https://patchwork.linux-mips.org/patch/19334/ Signed-off-by: James Hogan <jhogan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06iio:kfifo_buf: check for uint overflowMartin Kelly
commit 3d13de4b027d5f6276c0f9d3a264f518747d83f2 upstream. Currently, the following causes a kernel OOPS in memcpy: echo 1073741825 > buffer/length echo 1 > buffer/enable Note that using 1073741824 instead of 1073741825 causes "write error: Cannot allocate memory" but no OOPS. This is because 1073741824 == 2^30 and 1073741825 == 2^30+1. Since kfifo rounds up to the nearest power of 2, it will actually call kmalloc with roundup_pow_of_two(length) * bytes_per_datum. Using length == 1073741825 and bytes_per_datum == 2, we get: kmalloc(roundup_pow_of_two(1073741825) * 2 or kmalloc(2147483648 * 2) or kmalloc(4294967296) or kmalloc(UINT_MAX + 1) so this overflows to 0, causing kmalloc to return ZERO_SIZE_PTR and subsequent memcpy to fail once the device is enabled. Fix this by checking for overflow prior to allocating a kfifo. With this check added, the above code returns -EINVAL when enabling the buffer, rather than causing an OOPS. Signed-off-by: Martin Kelly <mkelly@xevo.com> cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06net/mlx4_en: fix potential use-after-free with dma_unmap_pageSarah Newman
[ Not relevant upstream, therefore no upstream commit. ] To fix, unmap the page as soon as possible. When swiotlb is in use, calling dma_unmap_page means that the original page mapped with dma_map_page must still be valid, as swiotlb will copy data from its internal cache back to the originally requested DMA location. When GRO is enabled, before this patch all references to the original frag may be put and the page freed before dma_unmap_page in mlx4_en_free_frag is called. It is possible there is a path where the use-after-free occurs even with GRO disabled, but this has not been observed so far. The bug can be trivially detected by doing the following: * Compile the kernel with DEBUG_PAGEALLOC * Run the kernel as a Xen Dom0 * Leave GRO enabled on the interface * Run a 10 second or more test with iperf over the interface. This bug was likely introduced in commit 4cce66cdd14a ("mlx4_en: map entire pages to increase throughput"), first part of u3.6. It was incidentally fixed in commit 34db548bfb95 ("mlx4: add page recycling in receive path"), first part of v4.12. This version applies to the v4.9 series. Signed-off-by: Sarah Newman <srn@prgmr.com> Tested-by: Sarah Newman <srn@prgmr.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/64s: Add support for a store forwarding barrier at kernel entry/exitNicholas Piggin
commit a048a07d7f4535baa4cbad6bc024f175317ab938 upstream. On some CPUs we can prevent a vulnerability related to store-to-load forwarding by preventing store forwarding between privilege domains, by inserting a barrier in kernel entry and exit paths. This is known to be the case on at least Power7, Power8 and Power9 powerpc CPUs. Barriers must be inserted generally before the first load after moving to a higher privilege, and after the last store before moving to a lower privilege, HV and PR privilege transitions must be protected. Barriers are added as patch sections, with all kernel/hypervisor entry points patched, and the exit points to lower privilge levels patched similarly to the RFI flush patching. Firmware advertisement is not implemented yet, so CPU flush types are hard coded. Thanks to Michal Suchánek for bug fixes and review. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michal Suchánek <msuchanek@suse.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/64s: Fix section mismatch warnings from setup_rfi_flush()Michael Ellerman
commit 501a78cbc17c329fabf8e9750a1e9ab810c88a0e upstream. The recent LPM changes to setup_rfi_flush() are causing some section mismatch warnings because we removed the __init annotation on setup_rfi_flush(): The function setup_rfi_flush() references the function __init ppc64_bolted_size(). the function __init memblock_alloc_base(). The references are actually in init_fallback_flush(), but that is inlined into setup_rfi_flush(). These references are safe because: - only pseries calls setup_rfi_flush() at runtime - pseries always passes L1D_FLUSH_FALLBACK at boot - so the fallback flush area will always be allocated - so the check in init_fallback_flush() will always return early: /* Only allocate the fallback flush area once (at boot time). */ if (l1d_flush_fallback_area) return; - and therefore we won't actually call the freed init routines. We should rework the code to make it safer by default rather than relying on the above, but for now as a quick-fix just add a __ref annotation to squash the warning. Fixes: abf110f3e1ce ("powerpc/rfi-flush: Make it possible to call setup_rfi_flush() again") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/pseries: Restore default security feature flags on setupMauricio Faria de Oliveira
commit 6232774f1599028a15418179d17f7df47ede770a upstream. After migration the security feature flags might have changed (e.g., destination system with unpatched firmware), but some flags are not set/clear again in init_cpu_char_feature_flags() because it assumes the security flags to be the defaults. Additionally, if the H_GET_CPU_CHARACTERISTICS hypercall fails then init_cpu_char_feature_flags() does not run again, which potentially might leave the system in an insecure or sub-optimal configuration. So, just restore the security feature flags to the defaults assumed by init_cpu_char_feature_flags() so it can set/clear them correctly, and to ensure safe settings are in place in case the hypercall fail. Fixes: f636c14790ea ("powerpc/pseries: Set or clear security feature flags") Depends-on: 19887d6a28e2 ("powerpc: Move default security feature flags") Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc: Move default security feature flagsMauricio Faria de Oliveira
commit e7347a86830f38dc3e40c8f7e28c04412b12a2e7 upstream. This moves the definition of the default security feature flags (i.e., enabled by default) closer to the security feature flags. This can be used to restore current flags to the default flags. Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/pseries: Fix clearing of security feature flagsMauricio Faria de Oliveira
commit 0f9bdfe3c77091e8704d2e510eb7c2c2c6cde524 upstream. The H_CPU_BEHAV_* flags should be checked for in the 'behaviour' field of 'struct h_cpu_char_result' -- 'character' is for H_CPU_CHAR_* flags. Found by playing around with QEMU's implementation of the hypercall: H_CPU_CHAR=0xf000000000000000 H_CPU_BEHAV=0x0000000000000000 This clears H_CPU_BEHAV_FAVOUR_SECURITY and H_CPU_BEHAV_L1D_FLUSH_PR so pseries_setup_rfi_flush() disables 'rfi_flush'; and it also clears H_CPU_CHAR_L1D_THREAD_PRIV flag. So there is no RFI flush mitigation at all for cpu_show_meltdown() to report; but currently it does: Original kernel: # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: RFI Flush Patched kernel: # cat /sys/devices/system/cpu/vulnerabilities/meltdown Not affected H_CPU_CHAR=0x0000000000000000 H_CPU_BEHAV=0xf000000000000000 This sets H_CPU_BEHAV_BNDS_CHK_SPEC_BAR so cpu_show_spectre_v1() should report vulnerable; but currently it doesn't: Original kernel: # cat /sys/devices/system/cpu/vulnerabilities/spectre_v1 Not affected Patched kernel: # cat /sys/devices/system/cpu/vulnerabilities/spectre_v1 Vulnerable Brown-paper-bag-by: Michael Ellerman <mpe@ellerman.id.au> Fixes: f636c14790ea ("powerpc/pseries: Set or clear security feature flags") Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/64s: Wire up cpu_show_spectre_v2()Michael Ellerman
commit d6fbe1c55c55c6937cbea3531af7da84ab7473c3 upstream. Add a definition for cpu_show_spectre_v2() to override the generic version. This has several permuations, though in practice some may not occur we cater for any combination. The most verbose is: Mitigation: Indirect branch serialisation (kernel only), Indirect branch cache disabled, ori31 speculation barrier enabled We don't treat the ori31 speculation barrier as a mitigation on its own, because it has to be *used* by code in order to be a mitigation and we don't know if userspace is doing that. So if that's all we see we say: Vulnerable, ori31 speculation barrier enabled Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/64s: Wire up cpu_show_spectre_v1()Michael Ellerman
commit 56986016cb8cd9050e601831fe89f332b4e3c46e upstream. Add a definition for cpu_show_spectre_v1() to override the generic version. Currently this just prints "Not affected" or "Vulnerable" based on the firmware flag. Although the kernel does have array_index_nospec() in a few places, we haven't yet audited all the powerpc code to see where it's necessary, so for now we don't list that as a mitigation. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/pseries: Use the security flags in pseries_setup_rfi_flush()Michael Ellerman
commit 2e4a16161fcd324b1f9bf6cb6856529f7eaf0689 upstream. Now that we have the security flags we can simplify the code in pseries_setup_rfi_flush() because the security flags have pessimistic defaults. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/powernv: Use the security flags in pnv_setup_rfi_flush()Michael Ellerman
commit 37c0bdd00d3ae83369ab60a6712c28e11e6458d5 upstream. Now that we have the security flags we can significantly simplify the code in pnv_setup_rfi_flush(), because we can use the flags instead of checking device tree properties and because the security flags have pessimistic defaults. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/64s: Enhance the information in cpu_show_meltdown()Michael Ellerman
commit ff348355e9c72493947be337bb4fae4fc1a41eba upstream. Now that we have the security feature flags we can make the information displayed in the "meltdown" file more informative. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/64s: Move cpu_show_meltdown()Michael Ellerman
commit 8ad33041563a10b34988800c682ada14b2612533 upstream. This landed in setup_64.c for no good reason other than we had nowhere else to put it. Now that we have a security-related file, that is a better place for it so move it. [mpe: Add extern for rfi_flush to fix bisection break] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/powernv: Set or clear security feature flagsMichael Ellerman
commit 77addf6e95c8689e478d607176b399a6242a777e upstream. Now that we have feature flags for security related things, set or clear them based on what we see in the device tree provided by firmware. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/pseries: Set or clear security feature flagsMichael Ellerman
commit f636c14790ead6cc22cf62279b1f8d7e11a67116 upstream. Now that we have feature flags for security related things, set or clear them based on what we receive from the hypercall. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc: Add security feature flags for Spectre/MeltdownMichael Ellerman
commit 9a868f634349e62922c226834aa23e3d1329ae7f upstream. This commit adds security feature flags to reflect the settings we receive from firmware regarding Spectre/Meltdown mitigations. The feature names reflect the names we are given by firmware on bare metal machines. See the hostboot source for details. Arguably these could be firmware features, but that then requires them to be read early in boot so they're available prior to asm feature patching, but we don't actually want to use them for patching. We may also want to dynamically update them in future, which would be incompatible with the way firmware features work (at the moment at least). So for now just make them separate flags. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/pseries: Add new H_GET_CPU_CHARACTERISTICS flagsMichael Ellerman
commit c4bc36628d7f8b664657d8bd6ad1c44c177880b7 upstream. Add some additional values which have been defined for the H_GET_CPU_CHARACTERISTICS hypercall. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/rfi-flush: Call setup_rfi_flush() after LPM migrationMichael Ellerman
commit 921bc6cf807ceb2ab8005319cf39f33494d6b100 upstream. We might have migrated to a machine that uses a different flush type, or doesn't need flushing at all. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/rfi-flush: Differentiate enabled and patched flush typesMauricio Faria de Oliveira
commit 0063d61ccfc011f379a31acaeba6de7c926fed2c upstream. Currently the rfi-flush messages print 'Using <type> flush' for all enabled_flush_types, but that is not necessarily true -- as now the fallback flush is always enabled on pseries, but the fixup function overwrites its nop/branch slot with other flush types, if available. So, replace the 'Using <type> flush' messages with '<type> flush is available'. Also, print the patched flush types in the fixup function, so users can know what is (not) being used (e.g., the slower, fallback flush, or no flush type at all if flush is disabled via the debugfs switch). Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/rfi-flush: Always enable fallback flush on pseriesMichael Ellerman
commit 84749a58b6e382f109abf1e734bc4dd43c2c25bb upstream. This ensures the fallback flush area is always allocated on pseries, so in case a LPAR is migrated from a patched to an unpatched system, it is possible to enable the fallback flush in the target system. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/rfi-flush: Make it possible to call setup_rfi_flush() againMichael Ellerman
commit abf110f3e1cea40f5ea15e85f5d67c39c14568a7 upstream. For PowerVM migration we want to be able to call setup_rfi_flush() again after we've migrated the partition. To support that we need to check that we're not trying to allocate the fallback flush area after memblock has gone away (i.e., boot-time only). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/rfi-flush: Move the logic to avoid a redo into the debugfs codeMichael Ellerman
commit 1e2a9fc7496955faacbbed49461d611b704a7505 upstream. rfi_flush_enable() includes a check to see if we're already enabled (or disabled), and in that case does nothing. But that means calling setup_rfi_flush() a 2nd time doesn't actually work, which is a bit confusing. Move that check into the debugfs code, where it really belongs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06powerpc/powernv: Support firmware disable of RFI flushMichael Ellerman
commit eb0a2d2620ae431c543963c8c7f08f597366fc60 upstream. Some versions of firmware will have a setting that can be configured to disable the RFI flush, add support for it. Fixes: 6e032b350cd1 ("powerpc/powernv: Check device-tree for RFI flush settings") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-14 17:23:43 +0000