| Age | Commit message (Collapse) | Author |
|---|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Andy Shevchenko:
- Users of Intel P-Unit IPC driver might be surprised by harmless
warning. Thus, switch to API which doesn't issue a warning at all.
- I²C multi-instantiate driver continues to add slave devices even when
IRQ resource is not found. For devices in the market IRQ resource is
mandatory, so, fail the ->probe() of the parent driver to avoid
slaves being probed.
- Avoid compiler warning due to unused variable in Classmate laptop
driver.
* tag 'platform-drivers-x86-v5.4-3' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: i2c-multi-instantiate: Fail the probe if no IRQ provided
platform/x86: intel_punit_ipc: Avoid error message when retrieving IRQ
platform/x86: classmate-laptop: remove unused variable
|
|
GFP_NOWAIT allocation can fail anytime - it doesn't wait for memory being
available and it fails if the mempool is exhausted and there is not enough
memory.
If we go down this path:
map_bio -> mg_start -> alloc_migration -> mempool_alloc(GFP_NOWAIT)
we can see that map_bio() doesn't check the return value of mg_start(),
and the bio is leaked.
If we go down this path:
map_bio -> mg_start -> mg_lock_writes -> alloc_prison_cell ->
dm_bio_prison_alloc_cell_v2 -> mempool_alloc(GFP_NOWAIT) ->
mg_lock_writes -> mg_complete
the bio is ended with an error - it is unacceptable because it could
cause filesystem corruption if the machine ran out of memory
temporarily.
Change GFP_NOWAIT to GFP_NOIO, so that the mempool code will properly
wait until memory becomes available. mempool_alloc with GFP_NOIO can't
fail, so remove the code paths that deal with allocation failure.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"The fixes pertain to a problem with initializing the Intel GPIO
irqchips when adding gpiochips.
Andy fixed it up elegantly by adding a hardware initialization
callback to the struct gpio_irq_chip so let's use this. Tested and
verified on the target hardware"
* tag 'gpio-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: lynxpoint: set default handler to be handle_bad_irq()
gpio: merrifield: Move hardware initialization to callback
gpio: lynxpoint: Move hardware initialization to callback
gpio: intel-mid: Move hardware initialization to callback
gpiolib: Initialize the hardware with a callback
gpio: merrifield: Restore use of irq_base
|
|
Both multi_cpu_stop() and set_state() access multi_stop_data::state
racily using plain accesses. These are subject to compiler
transformations which could break the intended behaviour of the code,
and this situation is detected by KCSAN on both arm64 and x86 (splats
below).
Improve matters by using READ_ONCE() and WRITE_ONCE() to ensure that the
compiler cannot elide, replay, or tear loads and stores.
In multi_cpu_stop() the two loads of multi_stop_data::state are expected to
be a consistent value, so snapshot the value into a temporary variable to
ensure this.
The state transitions are serialized by atomic manipulation of
multi_stop_data::num_threads, and other fields in multi_stop_data are not
modified while subject to concurrent reads.
KCSAN splat on arm64:
| BUG: KCSAN: data-race in multi_cpu_stop+0xa8/0x198 and set_state+0x80/0xb0
|
| write to 0xffff00001003bd00 of 4 bytes by task 24 on cpu 3:
| set_state+0x80/0xb0
| multi_cpu_stop+0x16c/0x198
| cpu_stopper_thread+0x170/0x298
| smpboot_thread_fn+0x40c/0x560
| kthread+0x1a8/0x1b0
| ret_from_fork+0x10/0x18
|
| read to 0xffff00001003bd00 of 4 bytes by task 14 on cpu 1:
| multi_cpu_stop+0xa8/0x198
| cpu_stopper_thread+0x170/0x298
| smpboot_thread_fn+0x40c/0x560
| kthread+0x1a8/0x1b0
| ret_from_fork+0x10/0x18
|
| Reported by Kernel Concurrency Sanitizer on:
| CPU: 1 PID: 14 Comm: migration/1 Not tainted 5.3.0-00007-g67ab35a199f4-dirty #3
| Hardware name: linux,dummy-virt (DT)
KCSAN splat on x86:
| write to 0xffffb0bac0013e18 of 4 bytes by task 19 on cpu 2:
| set_state kernel/stop_machine.c:170 [inline]
| ack_state kernel/stop_machine.c:177 [inline]
| multi_cpu_stop+0x1a4/0x220 kernel/stop_machine.c:227
| cpu_stopper_thread+0x19e/0x280 kernel/stop_machine.c:516
| smpboot_thread_fn+0x1a8/0x300 kernel/smpboot.c:165
| kthread+0x1b5/0x200 kernel/kthread.c:255
| ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:352
|
| read to 0xffffb0bac0013e18 of 4 bytes by task 44 on cpu 7:
| multi_cpu_stop+0xb4/0x220 kernel/stop_machine.c:213
| cpu_stopper_thread+0x19e/0x280 kernel/stop_machine.c:516
| smpboot_thread_fn+0x1a8/0x300 kernel/smpboot.c:165
| kthread+0x1b5/0x200 kernel/kthread.c:255
| ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:352
|
| Reported by Kernel Concurrency Sanitizer on:
| CPU: 7 PID: 44 Comm: migration/7 Not tainted 5.3.0+ #1
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20191007104536.27276-1-mark.rutland@arm.com
|
|
On Asus MJ401TA (with Realtek ALC256), the headset mic is connected to
pin 0x19, with default configuration value 0x411111f0 (indicating no
physical connection).
Enable this by quirking the pin. Mic jack detection was also tested and
found to be working.
This enables use of the headset mic on this product.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191017081501.17135-1-drake@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
BOSS Katana amplifiers cannot be used for recording or playback if quirks
are applied
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195223
Signed-off-by: Szabolcs Szőke <szszoke.code@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191011171937.8013-1-szszoke.code@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The option --sort=ORDER was only introduced in tar 1.28 (2014), which
is rather new and might not be available in some setups.
This patch tries to replicate the previous behaviour as closely as
possible to fix the kheaders build for older environments. It does
not produce identical archives compared to the previous version due
to minor sorting differences but produces reproducible results itself
in my tests.
Reported-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Dmitry Goldin <dgoldin+lkml@protonmail.ch>
Tested-by: Andreas Schwab <schwab@suse.de>
Tested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
disable ptp_ref_clk in suspend flow, and enable it in resume flow.
Fixes: f573c0b9c4e0 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some drivers just call phy_ethtool_ksettings_set() to set the
links, for those phy drivers that use genphy_read_status(), if
autoneg is on, and the link is up, than execute "ethtool -s
ethx autoneg on" will cause "link partner" information disappear.
The call trace is phy_ethtool_ksettings_set()->phy_start_aneg()
->linkmode_zero(phydev->lp_advertising)->genphy_read_status(),
the link didn't change, so genphy_read_status() just return, and
phydev->lp_advertising is zero now.
This patch moves the clear operation of lp_advertising from
phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and
if autoneg on and autoneg not complete, just clear what the
generic functions care about.
Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to extend the rcu_read_lock() section in rxrpc_error_report()
and use rcu_dereference_sk_user_data() instead of plain access
to sk->sk_user_data to make sure all rules are respected.
The compiler wont reload sk->sk_user_data at will, and RCU rules
prevent memory beeing freed too soon.
Fixes: f0308fb07080 ("rxrpc: Fix possible NULL pointer access in ICMP handling")
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As preempt-to-busy leaves the request on the HW as the resubmission is
processed, that request may complete in the background and even cause a
second virtual request to enter queue. This second virtual request
breaks our "single request in the virtual pipeline" assumptions.
Furthermore, as the virtual request may be completed and retired, we
lose the reference the virtual engine assumes is held. Normally, just
removing the request from the scheduler queue removes it from the
engine, but the virtual engine keeps track of its singleton request via
its ve->request. This pointer needs protecting with a reference.
v2: Drop unnecessary motion of rq->engine = owner
Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923152844.8914-1-chris@chris-wilson.co.uk
(cherry picked from commit b647c7df01b75761b4c0b1cb6f4841088c0b1121)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Daniel Vetter uncovered a nasty cycle in using the mmu-notifiers to
invalidate userptr objects which also happen to be pulled into GGTT
mmaps. That is when we unbind the userptr object (on mmu invalidation),
we revoke all CPU mmaps, which may then recurse into mmu invalidation.
We looked for ways of breaking the cycle, but the revocation on
invalidation is required and cannot be avoided. The only solution we
could see was to not allow such GGTT bindings of userptr objects in the
first place. In practice, no one really wants to use a GGTT mmapping of
a CPU pointer...
Just before Daniel's explosive lockdep patches land in v5.4-rc1, we got
a genuine blip from CI:
<4>[ 246.793958] ======================================================
<4>[ 246.793972] WARNING: possible circular locking dependency detected
<4>[ 246.793989] 5.3.0-gbd6c56f50d15-drmtip_372+ #1 Tainted: G U
<4>[ 246.794003] ------------------------------------------------------
<4>[ 246.794017] kswapd0/145 is trying to acquire lock:
<4>[ 246.794030] 000000003f565be6 (&dev->struct_mutex/1){+.+.}, at: userptr_mn_invalidate_range_start+0x18f/0x220 [i915]
<4>[ 246.794250]
but task is already holding lock:
<4>[ 246.794263] 000000001799cef9 (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe6/0x2a0
<4>[ 246.794291]
which lock already depends on the new lock.
<4>[ 246.794307]
the existing dependency chain (in reverse order) is:
<4>[ 246.794322]
-> #3 (&anon_vma->rwsem){++++}:
<4>[ 246.794344] down_write+0x33/0x70
<4>[ 246.794357] __vma_adjust+0x3d9/0x7b0
<4>[ 246.794370] __split_vma+0x16a/0x180
<4>[ 246.794385] mprotect_fixup+0x2a5/0x320
<4>[ 246.794399] do_mprotect_pkey+0x208/0x2e0
<4>[ 246.794413] __x64_sys_mprotect+0x16/0x20
<4>[ 246.794429] do_syscall_64+0x55/0x1c0
<4>[ 246.794443] entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[ 246.794456]
-> #2 (&mapping->i_mmap_rwsem){++++}:
<4>[ 246.794478] down_write+0x33/0x70
<4>[ 246.794493] unmap_mapping_pages+0x48/0x130
<4>[ 246.794519] i915_vma_revoke_mmap+0x81/0x1b0 [i915]
<4>[ 246.794519] i915_vma_unbind+0x11d/0x4a0 [i915]
<4>[ 246.794519] i915_vma_destroy+0x31/0x300 [i915]
<4>[ 246.794519] __i915_gem_free_objects+0xb8/0x4b0 [i915]
<4>[ 246.794519] drm_file_free.part.0+0x1e6/0x290
<4>[ 246.794519] drm_release+0xa6/0xe0
<4>[ 246.794519] __fput+0xc2/0x250
<4>[ 246.794519] task_work_run+0x82/0xb0
<4>[ 246.794519] do_exit+0x35b/0xdb0
<4>[ 246.794519] do_group_exit+0x34/0xb0
<4>[ 246.794519] __x64_sys_exit_group+0xf/0x10
<4>[ 246.794519] do_syscall_64+0x55/0x1c0
<4>[ 246.794519] entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[ 246.794519]
-> #1 (&vm->mutex){+.+.}:
<4>[ 246.794519] i915_gem_shrinker_taints_mutex+0x6d/0xe0 [i915]
<4>[ 246.794519] i915_address_space_init+0x9f/0x160 [i915]
<4>[ 246.794519] i915_ggtt_init_hw+0x55/0x170 [i915]
<4>[ 246.794519] i915_driver_probe+0xc9f/0x1620 [i915]
<4>[ 246.794519] i915_pci_probe+0x43/0x1b0 [i915]
<4>[ 246.794519] pci_device_probe+0x9e/0x120
<4>[ 246.794519] really_probe+0xea/0x3d0
<4>[ 246.794519] driver_probe_device+0x10b/0x120
<4>[ 246.794519] device_driver_attach+0x4a/0x50
<4>[ 246.794519] __driver_attach+0x97/0x130
<4>[ 246.794519] bus_for_each_dev+0x74/0xc0
<4>[ 246.794519] bus_add_driver+0x13f/0x210
<4>[ 246.794519] driver_register+0x56/0xe0
<4>[ 246.794519] do_one_initcall+0x58/0x300
<4>[ 246.794519] do_init_module+0x56/0x1f6
<4>[ 246.794519] load_module+0x25bd/0x2a40
<4>[ 246.794519] __se_sys_finit_module+0xd3/0xf0
<4>[ 246.794519] do_syscall_64+0x55/0x1c0
<4>[ 246.794519] entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[ 246.794519]
-> #0 (&dev->struct_mutex/1){+.+.}:
<4>[ 246.794519] __lock_acquire+0x15d8/0x1e90
<4>[ 246.794519] lock_acquire+0xa6/0x1c0
<4>[ 246.794519] __mutex_lock+0x9d/0x9b0
<4>[ 246.794519] userptr_mn_invalidate_range_start+0x18f/0x220 [i915]
<4>[ 246.794519] __mmu_notifier_invalidate_range_start+0x85/0x110
<4>[ 246.794519] try_to_unmap_one+0x76b/0x860
<4>[ 246.794519] rmap_walk_anon+0x104/0x280
<4>[ 246.794519] try_to_unmap+0xc0/0xf0
<4>[ 246.794519] shrink_page_list+0x561/0xc10
<4>[ 246.794519] shrink_inactive_list+0x220/0x440
<4>[ 246.794519] shrink_node_memcg+0x36e/0x740
<4>[ 246.794519] shrink_node+0xcb/0x490
<4>[ 246.794519] balance_pgdat+0x241/0x580
<4>[ 246.794519] kswapd+0x16c/0x530
<4>[ 246.794519] kthread+0x119/0x130
<4>[ 246.794519] ret_from_fork+0x24/0x50
<4>[ 246.794519]
other info that might help us debug this:
<4>[ 246.794519] Chain exists of:
&dev->struct_mutex/1 --> &mapping->i_mmap_rwsem --> &anon_vma->rwsem
<4>[ 246.794519] Possible unsafe locking scenario:
<4>[ 246.794519] CPU0 CPU1
<4>[ 246.794519] ---- ----
<4>[ 246.794519] lock(&anon_vma->rwsem);
<4>[ 246.794519] lock(&mapping->i_mmap_rwsem);
<4>[ 246.794519] lock(&anon_vma->rwsem);
<4>[ 246.794519] lock(&dev->struct_mutex/1);
<4>[ 246.794519]
*** DEADLOCK ***
v2: Say no to mmap_ioctl
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111744
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111870
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190928082546.3473-1-chris@chris-wilson.co.uk
(cherry picked from commit a4311745bba9763e3c965643d4531bd5765b0513)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The first come first served apporoach to handling the VBT
child device AUX ch conflicts has backfired. We have machines
in the wild where the VBT specifies both port A eDP and
port E DP (in that order) with port E being the real one.
So let's try to flip the preference around and let the last
child device win once again.
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Tested-by: Masami Ichikawa <masami256@gmail.com>
Tested-by: Torsten <freedesktop201910@liggy.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111966
Fixes: 36a0f92020dc ("drm/i915/bios: make child device order the priority order")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011202030.8829-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 41e35ffb380bde1379e4030bb5b2ac824d5139cf)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Pull setting -EIO on the hung requests into its own utility function.
Having allowed ourselves to short-circuit submission of completed
requests, we can now do the mark_eio() prior to submission and avoid
some redundant operations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-4-chris@chris-wilson.co.uk
(cherry picked from commit 0d7cf7bc15e75bf79f2f65d61d19f896609f816a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This reverts commit b0818f80c8c1bc215bba276bd61c216014fab23b.
Started seeing weird behavior after this patch especially in
the IPv6 code path. Haven't root caused it, but since this was
applied to net branch, taking a precautionary measure to revert
it and look / analyze those failures
Revert this now and I'll send a better fix after analysing / fixing
the weirdness observed.
CC: Eric Dumazet <edumazet@google.com>
CC: Wei Wang <weiwan@google.com>
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sign-extending TTBR1 addresses when converting to an untagged address
breaks the documented POSIX semantics for mlock() in some obscure error
cases where we end up returning -EINVAL instead of -ENOMEM as a direct
result of rewriting the upper address bits.
Rework the untagged_addr() macro to preserve the upper address bits for
TTBR1 addresses and only clear the tag bits for user addresses. This
matches the behaviour of the 'clear_address_tag' assembly macro, so
rename that and align the implementations at the same time so that they
use the same instruction sequences for the tag manipulation.
Link: https://lore.kernel.org/stable/20191014162651.GF19200@arrakis.emea.arm.com/
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When detecting a spurious EL1 translation fault, we have the CPU retry
the translation using an AT S1E1R instruction, and inspect PAR_EL1 to
determine if the fault was spurious.
When PAR_EL1.F == 0, the AT instruction successfully translated the
address without a fault, which implies the original fault was spurious.
However, in this case we return false and treat the original fault as if
it was not spurious.
Invert the return value so that we treat such a case as spurious.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 42f91093b043 ("arm64: mm: Ignore spurious translation faults taken from the kernel")
Tested-by: James Morse <james.morse@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The 'F' field of the PAR_EL1 register lives in bit 0, not bit 1.
Fix the broken definition in 'sysreg.h'.
Fixes: e8620cff9994 ("arm64: sysreg: Add some field definitions for PAR_EL1")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Preempting from IRQ-return means that the task has its PSTATE saved
on the stack, which will get restored when the task is resumed and does
the actual IRQ return.
However, enabling some CPU features requires modifying the PSTATE. This
means that, if a task was scheduled out during an IRQ-return before all
CPU features are enabled, the task might restore a PSTATE that does not
include the feature enablement changes once scheduled back in.
* Task 1:
PAN == 0 ---| |---------------
| |<- return from IRQ, PSTATE.PAN = 0
| <- IRQ |
+--------+ <- preempt() +--
^
|
reschedule Task 1, PSTATE.PAN == 1
* Init:
--------------------+------------------------
^
|
enable_cpu_features
set PSTATE.PAN on all CPUs
Worse than this, since PSTATE is untouched when task switching is done,
a task missing the new bits in PSTATE might affect another task, if both
do direct calls to schedule() (outside of IRQ/exception contexts).
Fix this by preventing preemption on IRQ-return until features are
enabled on all CPUs.
This way the only PSTATE values that are saved on the stack are from
synchronous exceptions. These are expected to be fatal this early, the
exception is BRK for WARN_ON(), but as this uses do_debug_exception()
which keeps IRQs masked, it shouldn't call schedule().
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
[james: Replaced a really cool hack, with an even simpler static key in C.
expanded commit message with Julien's cover-letter ascii art]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-linus
Pull MD fix from Song.
* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid0: fix warning message for parameter default_layout
|
|
The message should match the parameter, i.e. raid0.default_layout.
Fixes: c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.")
Cc: NeilBrown <neilb@suse.de>
Reported-by: Ivan Topolsky <doktor.yak@gmail.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
The __kthread_queue_delayed_work is not exported so
make it static, to avoid the following sparse warning:
kernel/kthread.c:869:6: warning: symbol '__kthread_queue_delayed_work' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On a machine with a 64K PAGE_SIZE, the nested for loops in
test_check_nonzero_user() can lead to soft lockups, eg:
watchdog: BUG: soft lockup - CPU#4 stuck for 22s! [modprobe:611]
Modules linked in: test_user_copy(+) vmx_crypto gf128mul crc32c_vpmsum virtio_balloon ip_tables x_tables autofs4
CPU: 4 PID: 611 Comm: modprobe Tainted: G L 5.4.0-rc1-gcc-8.2.0-00001-gf5a1a536fa14-dirty #1151
...
NIP __might_sleep+0x20/0xc0
LR __might_fault+0x40/0x60
Call Trace:
check_zeroed_user+0x12c/0x200
test_user_copy_init+0x67c/0x1210 [test_user_copy]
do_one_initcall+0x60/0x340
do_init_module+0x7c/0x2f0
load_module+0x2d94/0x30e0
__do_sys_finit_module+0xc8/0x150
system_call+0x5c/0x68
Even with a 4K PAGE_SIZE the test takes multiple seconds. Instead
tweak it to only scan a 1024 byte region, but make it cross the
page boundary.
Fixes: f5a1a536fa14 ("lib: introduce copy_struct_from_user() helper")
Suggested-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191016122732.13467-1-mpe@ellerman.id.au
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
If there are neither processor objects nor processor device objects
in the ACPI tables, the per-CPU processors table will not be
initialized and attempting to dereference pointers from there will
cause the kernel to crash. This happens in acpi_processor_ppc_init()
and acpi_thermal_cpufreq_init() after commit d15ce412737a ("ACPI:
cpufreq: Switch to QoS requests instead of cpufreq notifier")
which didn't add the requisite NULL pointer checks in there.
Add the NULL pointer checks to acpi_processor_ppc_init() and
acpi_thermal_cpufreq_init(), and to the corresponding "exit"
routines.
While at it, drop redundant return instructions from
acpi_processor_ppc_init() and acpi_thermal_cpufreq_init().
Fixes: d15ce412737a ("ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
change_bit implementation for XCHAL_HAVE_EXCLUSIVE case changes all bits
except the one required due to copy-paste error from clear_bit.
Cc: stable@vger.kernel.org # v5.2+
Fixes: f7c34874f04a ("xtensa: add exclusive atomics support")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
This patch fixes the virtual address layout in pgtable.h. The virtual
address of FIXADDR_START and VMEMMAP_START should not be overlapped.
Fixes: d95f1a542c3d ("RISC-V: Implement sparsemem")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: fixed patch description]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Make sure res does not contain random value if the call to
sr_read_cmd fails for some reason.
Reported-by: syzbot+f1842130bbcfb335bac1@syzkaller.appspotmail.com
Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The RGMII_MODE_EN bit value was 0 for GENET versions 1 through 3, and
became 6 for GENET v4 and above, account for that difference.
Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The tc_flow_parsers is not used outside of the driver, so
make it static to avoid the following sparse warning:
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c:516:3: warning: symbol 'tc_flow_parsers' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The cpdma_chan_split_pool() function is not used outside of
the driver, so make it static to avoid the following sparse
warning:
drivers/net/ethernet/ti/davinci_cpdma.c:725:5: warning: symbol 'cpdma_chan_split_pool' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 7f683b920479 ("i825xx: switch to switch to dma_alloc_attrs")
switched dma allocation over to dma_alloc_attr, but didn't convert
the SNI part to request consistent DMA memory. This broke sni_82596
since driver doesn't do dma_cache_sync for performance reasons.
Fix this by using different DMA_ATTRs for lasi_82596 and sni_82596.
Fixes: 7f683b920479 ("i825xx: switch to switch to dma_alloc_attrs")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported a memory leak:
BUG: memory leak, unreferenced object 0xffff888120b3d380 (size 64):
backtrace:
[...] slab_alloc mm/slab.c:3319 [inline]
[...] kmem_cache_alloc+0x13f/0x2c0 mm/slab.c:3483
[...] sctp_bucket_create net/sctp/socket.c:8523 [inline]
[...] sctp_get_port_local+0x189/0x5a0 net/sctp/socket.c:8270
[...] sctp_do_bind+0xcc/0x200 net/sctp/socket.c:402
[...] sctp_bindx_add+0x4b/0xd0 net/sctp/socket.c:497
[...] sctp_setsockopt_bindx+0x156/0x1b0 net/sctp/socket.c:1022
[...] sctp_setsockopt net/sctp/socket.c:4641 [inline]
[...] sctp_setsockopt+0xaea/0x2dc0 net/sctp/socket.c:4611
[...] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3147
[...] __sys_setsockopt+0x10f/0x220 net/socket.c:2084
[...] __do_sys_setsockopt net/socket.c:2100 [inline]
It was caused by when sending msgs without binding a port, in the path:
inet_sendmsg() -> inet_send_prepare() -> inet_autobind() ->
.get_port/sctp_get_port(), sp->bind_hash will be set while bp->port is
not. Later when binding another port by sctp_setsockopt_bindx(), a new
bucket will be created as bp->port is not set.
sctp's autobind is supposed to call sctp_autobind() where it does all
things including setting bp->port. Since sctp_autobind() is called in
sctp_sendmsg() if the sk is not yet bound, it should have skipped the
auto bind.
THis patch is to avoid calling inet_autobind() in inet_send_prepare()
by changing sctp_prot .no_autobind with true, also remove the unused
.get_port.
Reported-by: syzbot+d44f7bbebdea49dbc84a@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a application sends many packets with the same txtime, they may
be transmitted out of order (different from the order in which they
were enqueued).
This happens because when inserting elements into the tree, when the
txtime of two packets are the same, the new packet is inserted at the
left side of the tree, causing the reordering. The only effect of this
change should be that packets with the same txtime will be transmitted
in the order they are enqueued.
The application in question (the AVTP GStreamer plugin, still in
development) is sending video traffic, in which each video frame have
a single presentation time, the problem is that when packetizing,
multiple packets end up with the same txtime.
The receiving side was rejecting packets because they were being
received out of order.
Fixes: 25db26a91364 ("net/sched: Introduce the ETF Qdisc")
Reported-by: Ederson de Souza <ederson.desouza@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tc_ctl_action() has the ability to loop forever if tcf_action_add()
returns -EAGAIN.
This special case has been done in case a module needed to be loaded,
but it turns out that tcf_add_notify() could also return -EAGAIN
if the socket sk_rcvbuf limit is hit.
We need to separate the two cases, and only loop for the module
loading case.
While we are at it, add a limit of 10 attempts since unbounded
loops are always scary.
syzbot repro was something like :
socket(PF_NETLINK, SOCK_RAW|SOCK_NONBLOCK, NETLINK_ROUTE) = 3
write(3, ..., 38) = 38
setsockopt(3, SOL_SOCKET, SO_RCVBUF, [0], 4) = 0
sendmsg(3, {msg_name(0)=NULL, msg_iov(1)=[{..., 388}], msg_controllen=0, msg_flags=0x10}, ...)
NMI backtrace for cpu 0
CPU: 0 PID: 1054 Comm: khungtaskd Not tainted 5.4.0-rc1+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
nmi_cpu_backtrace.cold+0x70/0xb2 lib/nmi_backtrace.c:101
nmi_trigger_cpumask_backtrace+0x23b/0x28b lib/nmi_backtrace.c:62
arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38
trigger_all_cpu_backtrace include/linux/nmi.h:146 [inline]
check_hung_uninterruptible_tasks kernel/hung_task.c:205 [inline]
watchdog+0x9d0/0xef0 kernel/hung_task.c:289
kthread+0x361/0x430 kernel/kthread.c:255
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 8859 Comm: syz-executor910 Not tainted 5.4.0-rc1+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:arch_local_save_flags arch/x86/include/asm/paravirt.h:751 [inline]
RIP: 0010:lockdep_hardirqs_off+0x1df/0x2e0 kernel/locking/lockdep.c:3453
Code: 5c 08 00 00 5b 41 5c 41 5d 5d c3 48 c7 c0 58 1d f3 88 48 ba 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 0f 85 d3 00 00 00 <48> 83 3d 21 9e 99 07 00 0f 84 b9 00 00 00 9c 58 0f 1f 44 00 00 f6
RSP: 0018:ffff8880a6f3f1b8 EFLAGS: 00000046
RAX: 1ffffffff11e63ab RBX: ffff88808c9c6080 RCX: 0000000000000000
RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffff88808c9c6914
RBP: ffff8880a6f3f1d0 R08: ffff88808c9c6080 R09: fffffbfff16be5d1
R10: fffffbfff16be5d0 R11: 0000000000000003 R12: ffffffff8746591f
R13: ffff88808c9c6080 R14: ffffffff8746591f R15: 0000000000000003
FS: 00000000011e4880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffff600400 CR3: 00000000a8920000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
trace_hardirqs_off+0x62/0x240 kernel/trace/trace_preemptirq.c:45
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
_raw_spin_lock_irqsave+0x6f/0xcd kernel/locking/spinlock.c:159
__wake_up_common_lock+0xc8/0x150 kernel/sched/wait.c:122
__wake_up+0xe/0x10 kernel/sched/wait.c:142
netlink_unlock_table net/netlink/af_netlink.c:466 [inline]
netlink_unlock_table net/netlink/af_netlink.c:463 [inline]
netlink_broadcast_filtered+0x705/0xb80 net/netlink/af_netlink.c:1514
netlink_broadcast+0x3a/0x50 net/netlink/af_netlink.c:1534
rtnetlink_send+0xdd/0x110 net/core/rtnetlink.c:714
tcf_add_notify net/sched/act_api.c:1343 [inline]
tcf_action_add+0x243/0x370 net/sched/act_api.c:1362
tc_ctl_action+0x3b5/0x4bc net/sched/act_api.c:1410
rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5386
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5404
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:657
___sys_sendmsg+0x803/0x920 net/socket.c:2311
__sys_sendmsg+0x105/0x1d0 net/socket.c:2356
__do_sys_sendmsg net/socket.c:2365 [inline]
__se_sys_sendmsg net/socket.c:2363 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2363
do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440939
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+cf0adbb9c28c8866c788@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch corrects the SPDX License Identifier style
in header files related to Distributed Switch Architecture
drivers for NXP SJA1105 series Ethernet switch support.
It uses an expilict block comment for the SPDX License
Identifier.
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot found that if __inet_inherit_port() returns an error,
we call tcp_done() after inet_csk_prepare_forced_close(),
meaning the socket lock is no longer held.
We might fix this in a different way in net-next, but
for 5.4 it seems safer to relax the lockdep check.
Fixes: d983ea6f16b8 ("tcp: add rcu protection around tp->fastopen_rsk")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MarkLee says:
====================
Update MT7629 to support PHYLINK API
This patch set has two goals :
1. Fix mt7629 GMII mode issue after apply mediatek
PHYLINK support patch.
2. Update mt7629 dts to reflect the latest dt-binding
with PHYLINK support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* Removes mediatek,physpeed property from dtsi that is useless in PHYLINK
* Use the fixed-link property speed = <2500> to set the phy in 2.5Gbit.
* Set gmac1 to gmii mode that connect to a internal gphy
Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the original design, mtk_phy_connect function will set ge_mode=1
if phy-mode is GMII(PHY_INTERFACE_MODE_GMII) and then set the correct
ge_mode to ETHSYS_SYSCFG0 register. This logic was broken after apply
mediatek PHYLINK patch(Fixes tag), the new mtk_mac_config function will
not set ge_mode=1 for GMII mode hence the final ETHSYS_SYSCFG0 setting
will be incorrect for mt7629 GMII mode. This patch add the missing logic
back to fix it.
Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support")
Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 883a2a80f79ca5c0c105605fafabd1f3df99b34c.
Apparently use dmi_get_bios_year() as manufacturing date isn't accurate
and this breaks older laptops with new BIOS update.
So let's revert this patch.
There are still new HP laptops still need to use SMBus to support all
features, but it'll be enabled via a whitelist.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191001070845.9720-1-kai.heng.feng@canonical.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Davide Caratti says:
====================
net/sched: fix wrong behavior of MPLS push/pop action
this series contains two fixes for TC 'act_mpls', that try to address
two problems that can be observed configuring simple 'push' / 'pop'
operations:
- patch 1/2 avoids dropping non-MPLS packets that pass through the MPLS
'pop' action.
- patch 2/2 fixes corruption of the L2 header that occurs when 'push'
or 'pop' actions are configured in TC egress path.
v2: - change commit message in patch 1/2 to better describe that the
patch impacts only TC, thanks to Simon Horman
- fix missing documentation of 'mac_len' in patch 2/2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the following script:
# tc qdisc add dev eth0 clsact
# tc filter add dev eth0 egress protocol ip matchall \
> action mpls push protocol mpls_uc label 0x355aa bos 1
causes corruption of all IP packets transmitted by eth0. On TC egress, we
can't rely on the value of skb->mac_len, because it's 0 and a MPLS 'push'
operation will result in an overwrite of the first 4 octets in the packet
L2 header (e.g. the Destination Address if eth0 is an Ethernet); the same
error pattern is present also in the MPLS 'pop' operation. Fix this error
in act_mpls data plane, computing 'mac_len' as the difference between the
network header and the mac header (when not at TC ingress), and use it in
MPLS 'push'/'pop' core functions.
v2: unbreak 'make htmldocs' because of missing documentation of 'mac_len'
in skb_mpls_pop(), reported by kbuild test robot
CC: Lorenzo Bianconi <lorenzo@kernel.org>
Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the following script:
# tc qdisc add dev eth0 clsact
# tc filter add dev eth0 egress matchall action mpls pop
implicitly makes the kernel drop all packets transmitted by eth0, if they
don't have a MPLS header. This behavior is uncommon: other encapsulations
(like VLAN) just let the packet pass unmodified. Since the result of MPLS
'pop' operation would be the same regardless of the presence / absence of
MPLS header(s) in the original packet, we can let skb_mpls_pop() return 0
when dealing with non-MPLS packets.
For the OVS use-case, this is acceptable because __ovs_nla_copy_actions()
already ensures that MPLS 'pop' operation only occurs with packets having
an MPLS Ethernet type (and there are no other callers in current code, so
the semantic change should be ok).
v2: better documentation of use-cases for skb_mpls_pop(), thanks to Simon
Horman
Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch corrects the SPDX License Identifier style
in header files related to Cavium Ethernet drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch corrects the SPDX License Identifier style
in header files related to Distributed Switch Architecture
drivers for Microchip KSZ series switch support.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is an arbitrary difference between the system resume and
runtime resume code paths for PCI devices regarding the delay to
apply when switching the devices from D3cold to D0.
Namely, pci_restore_standard_config() used in the runtime resume
code path calls pci_set_power_state() which in turn invokes
__pci_start_power_transition() to power up the device through the
platform firmware and that function applies the transition delay
(as per PCI Express Base Specification Revision 2.0, Section 6.6.1).
However, pci_pm_default_resume_early() used in the system resume
code path calls pci_power_up() which doesn't apply the delay at
all and that causes issues to occur during resume from
suspend-to-idle on some systems where the delay is required.
Since there is no reason for that difference to exist, modify
pci_power_up() to follow pci_set_power_state() more closely and
invoke __pci_start_power_transition() from there to call the
platform firmware to power up the device (in case that's necessary).
Fixes: db288c9c5f9d ("PCI / PM: restore the original behavior of pci_set_power_state()")
Reported-by: Daniel Drake <drake@endlessm.com>
Tested-by: Daniel Drake <drake@endlessm.com>
Link: https://lore.kernel.org/linux-pm/CAD8Lp44TYxrMgPLkHCqF9hv6smEurMXvmmvmtyFhZ6Q4SE+dig@mail.gmail.com/T/#m21be74af263c6a34f36e0fc5c77c5449d9406925
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
|
|
Pull virtio fixes from Michael Tsirkin:
"Some minor bugfixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost/test: stop device before reset
tools/virtio: xen stub
tools/virtio: more stubs
|
|
virt device tree incorrectly uses 0xf0000000 on both sides of PCI IO
ports address space mapping. This results in incorrect port address
assignment in PCI IO BARs and subsequent crash on attempt to access
them. Use 0 as base address in PCI IO ports address space.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Commit c312ef176399 "libata/ahci: Drop PCS quirk for Denverton and
beyond" got the polarity wrong on the check for which board-ids should
have the quirk applied. The board type board_ahci_pcs7 is defined at the
end of the list such that "pcs7" boards can be special cased in the
future if they need the quirk. All prior Intel board ids "<
board_ahci_pcs7" should proceed with applying the quirk.
Reported-by: Andreas Friedrich <afrie@gmx.net>
Reported-by: Stephen Douthit <stephend@silicom-usa.com>
Fixes: c312ef176399 ("libata/ahci: Drop PCS quirk for Denverton and beyond")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five changes, two in drivers (qla2xxx, zfcp), one to MAINTAINERS
(qla2xxx) and two in the core.
The last two are mostly about removing incorrect messages from the
kernel log: the resid message is definitely wrong and the sync cache
on protected drive problem is arguably wrong"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: MAINTAINERS: Update qla2xxx driver
scsi: zfcp: fix reaction on bit error threshold notification
scsi: core: save/restore command resid for error handling
scsi: qla2xxx: Remove WARN_ON_ONCE in qla2x00_status_cont_entry()
scsi: sd: Ignore a failure to sync cache due to lack of authorization
|
