summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-16dm-log-writes: set dma_alignment limit in io_hintsKeith Busch
This device mapper needs bio vectors to be sized and memory aligned to the logical block size. Set the minimum required queue limit accordingly. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20221110184501.2451620-6-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-16dm-integrity: set dma_alignment limit in io_hintsKeith Busch
This device mapper needs bio vectors to be sized and memory aligned to the logical block size. Set the minimum required queue limit accordingly. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20221110184501.2451620-5-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-16block: make blk_set_default_limits() privateKeith Busch
There are no external users of this function. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20221110184501.2451620-4-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-16dm-crypt: provide dma_alignment limit in io_hintsKeith Busch
This device mapper needs bio vectors to be sized and memory aligned to the logical block size. Set the minimum required queue limit accordingly. Link: https://lore.kernel.org/linux-block/20221101001558.648ee024@xps.demsh.org/ Fixes: b1a000d3b8ec5 ("block: relax direct io memory alignment") Reportred-by: Eric Biggers <ebiggers@kernel.org> Reported-by: Dmitrii Tcvetkov <me@demsh.org> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20221110184501.2451620-3-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-16block: make dma_alignment a stacking queue_limitKeith Busch
Device mappers had always been getting the default 511 dma mask, but the underlying device might have a larger alignment requirement. Since this value is used to determine alloweable direct-io alignment, this needs to be a stackable limit. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20221110184501.2451620-2-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-15drbd: use after free in drbd_create_device()Dan Carpenter
The drbd_destroy_connection() frees the "connection" so use the _safe() iterator to prevent a use after free. Fixes: b6f85ef9538b ("drbd: Iterate over all connections") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/Y3Jd5iZRbNQ9w6gm@kili Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-14blk-cgroup: properly pin the parent in blkcg_css_onlineChris Mason
blkcg_css_online is supposed to pin the blkcg of the parent, but 397c9f46ee4d refactored things and along the way, changed it to pin the css instead. This results in extra pins, and we end up leaking blkcgs and cgroups. Fixes: 397c9f46ee4d ("blk-cgroup: move blkcg_{pin,unpin}_online out of line") Signed-off-by: Chris Mason <clm@fb.com> Spotted-by: Rik van Riel <riel@surriel.com> Cc: <stable@vger.kernel.org> # v5.19+ Acked-by: Johannes Weiner <hannes@cmpxchg.org> Link: https://lore.kernel.org/r/20221114181930.2093706-1-clm@fb.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-10Merge tag 'nvme-6.1-2022-11-10' of git://git.infradead.org/nvme into block-6.1block-6.1-2022-11-11Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.1 - quiet user passthrough command errors (Keith Busch) - fix memory leak in nvmet_subsys_attr_model_store_locked - fix a memory leak in nvmet-auth (Sagi Grimberg)" * tag 'nvme-6.1-2022-11-10' of git://git.infradead.org/nvme: nvmet: fix a memory leak nvmet: fix memory leak in nvmet_subsys_attr_model_store_locked nvme: quiet user passthrough command errors
2022-11-09nvmet: fix a memory leakSagi Grimberg
We need to also free the dhchap_ctrl_secret when releasing nvmet_host. kmemleak complaint: -- unreferenced object 0xffff99b1cbca5140 (size 64): comm "check", pid 4864, jiffies 4305092436 (age 2913.583s) hex dump (first 32 bytes): 44 48 48 43 2d 31 3a 30 30 3a 65 36 2b 41 63 44 DHHC-1:00:e6+AcD 39 76 47 4d 52 57 59 78 67 54 47 44 51 59 47 78 9vGMRWYxgTGDQYGx backtrace: [<00000000c07d369d>] kstrdup+0x2e/0x60 [<000000001372171c>] 0xffffffffc0cceec6 [<0000000010dbf50b>] 0xffffffffc0cc6783 [<000000007465e93c>] configfs_write_iter+0xb1/0x120 [<0000000039c23f62>] vfs_write+0x2be/0x3c0 [<000000002da4351c>] ksys_write+0x5f/0xe0 [<00000000d5011e32>] do_syscall_64+0x38/0x90 [<00000000503870cf>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: db1312dd9548 ("nvmet: implement basic In-Band Authentication") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-11-09nvmet: fix memory leak in nvmet_subsys_attr_model_store_lockedAleksandr Miloserdov
Since model_number is allocated before it needs to be freed before kmemdump_nul. Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Aleksandr Miloserdov <a.miloserdov@yadro.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-11-09nvme: quiet user passthrough command errorsKeith Busch
The driver is spamming the kernel logs for entirely harmless errors from user space submitting unsupported commands. Just silence the errors. The application has direct access to command status, so there's no need to log these. And since every passthrough command now uses the quiet flag, move the setting to the common initializer. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Alan Adamson <alan.adamson@oracle.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Tested-by: Alan Adamson <alan.adamson@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-11-08block: sed-opal: kmalloc the cmd/resp buffersSerge Semin
In accordance with [1] the DMA-able memory buffers must be cacheline-aligned otherwise the cache writing-back and invalidation performed during the mapping may cause the adjacent data being lost. It's specifically required for the DMA-noncoherent platforms [2]. Seeing the opal_dev.{cmd,resp} buffers are implicitly used for DMAs in the NVME and SCSI/SD drivers in framework of the nvme_sec_submit() and sd_sec_submit() methods respectively they must be cacheline-aligned to prevent the denoted problem. One of the option to guarantee that is to kmalloc the buffers [2]. Let's explicitly allocate them then instead of embedding into the opal_dev structure instance. Note this fix was inspired by the commit c94b7f9bab22 ("nvme-hwmon: kmalloc the NVME SMART log buffer"). [1] Documentation/core-api/dma-api.rst [2] Documentation/core-api/dma-api-howto.rst Fixes: 455a7b238cd6 ("block: Add Sed-opal library") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20221107203944.31686-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-08block, bfq: fix null pointer dereference in bfq_bio_bfqg()Yu Kuai
Out test found a following problem in kernel 5.10, and the same problem should exist in mainline: BUG: kernel NULL pointer dereference, address: 0000000000000094 PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 7 PID: 155 Comm: kworker/7:1 Not tainted 5.10.0-01932-g19e0ace2ca1d-dirty 4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-b4 Workqueue: kthrotld blk_throtl_dispatch_work_fn RIP: 0010:bfq_bio_bfqg+0x52/0xc0 Code: 94 00 00 00 00 75 2e 48 8b 40 30 48 83 05 35 06 c8 0b 01 48 85 c0 74 3d 4b RSP: 0018:ffffc90001a1fba0 EFLAGS: 00010002 RAX: ffff888100d60400 RBX: ffff8881132e7000 RCX: 0000000000000000 RDX: 0000000000000017 RSI: ffff888103580a18 RDI: ffff888103580a18 RBP: ffff8881132e7000 R08: 0000000000000000 R09: ffffc90001a1fe10 R10: 0000000000000a20 R11: 0000000000034320 R12: 0000000000000000 R13: ffff888103580a18 R14: ffff888114447000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88881fdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000094 CR3: 0000000100cdb000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: bfq_bic_update_cgroup+0x3c/0x350 ? ioc_create_icq+0x42/0x270 bfq_init_rq+0xfd/0x1060 bfq_insert_requests+0x20f/0x1cc0 ? ioc_create_icq+0x122/0x270 blk_mq_sched_insert_requests+0x86/0x1d0 blk_mq_flush_plug_list+0x193/0x2a0 blk_flush_plug_list+0x127/0x170 blk_finish_plug+0x31/0x50 blk_throtl_dispatch_work_fn+0x151/0x190 process_one_work+0x27c/0x5f0 worker_thread+0x28b/0x6b0 ? rescuer_thread+0x590/0x590 kthread+0x153/0x1b0 ? kthread_flush_work+0x170/0x170 ret_from_fork+0x1f/0x30 Modules linked in: CR2: 0000000000000094 ---[ end trace e2e59ac014314547 ]--- RIP: 0010:bfq_bio_bfqg+0x52/0xc0 Code: 94 00 00 00 00 75 2e 48 8b 40 30 48 83 05 35 06 c8 0b 01 48 85 c0 74 3d 4b RSP: 0018:ffffc90001a1fba0 EFLAGS: 00010002 RAX: ffff888100d60400 RBX: ffff8881132e7000 RCX: 0000000000000000 RDX: 0000000000000017 RSI: ffff888103580a18 RDI: ffff888103580a18 RBP: ffff8881132e7000 R08: 0000000000000000 R09: ffffc90001a1fe10 R10: 0000000000000a20 R11: 0000000000034320 R12: 0000000000000000 R13: ffff888103580a18 R14: ffff888114447000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88881fdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000094 CR3: 0000000100cdb000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Root cause is quite complex: 1) use bfq elevator for the test device. 2) create a cgroup CG 3) config blk throtl in CG blkg_conf_prep blkg_create 4) create a thread T1 and issue async io in CG: bio_init bio_associate_blkg ... submit_bio submit_bio_noacct blk_throtl_bio -> io is throttled // io submit is done 5) switch elevator: bfq_exit_queue blkcg_deactivate_policy list_for_each_entry(blkg, &q->blkg_list, q_node) blkg->pd[] = NULL // bfq policy is removed 5) thread t1 exist, then remove the cgroup CG: blkcg_unpin_online blkcg_destroy_blkgs blkg_destroy list_del_init(&blkg->q_node) // blkg is removed from queue list 6) switch elevator back to bfq bfq_init_queue bfq_create_group_hierarchy blkcg_activate_policy list_for_each_entry_reverse(blkg, &q->blkg_list) // blkg is removed from list, hence bfq policy is still NULL 7) throttled io is dispatched to bfq: bfq_insert_requests bfq_init_rq bfq_bic_update_cgroup bfq_bio_bfqg bfqg = blkg_to_bfqg(blkg) // bfqg is NULL because bfq policy is NULL The problem is only possible in bfq because only bfq can be deactivated and activated while queue is online, while others can only be deactivated while the device is removed. Fix the problem in bfq by checking if blkg is online before calling blkg_to_bfqg(). Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221108103434.2853269-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-31block: blk_add_rq_to_plug(): clear stale 'last' after flushblock-6.1-2022-11-05Al Viro
blk_mq_flush_plug_list() empties ->mq_list and request we'd peeked there before that call is gone; in any case, we are not dealing with a mix of requests for different queues now - there's no requests left in the plug. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-31blk-mq: Fix kmemleak in blk_mq_init_allocated_queueChen Jun
There is a kmemleak caused by modprobe null_blk.ko unreferenced object 0xffff8881acb1f000 (size 1024): comm "modprobe", pid 836, jiffies 4294971190 (age 27.068s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff 00 53 99 9e ff ff ff ff .........S...... backtrace: [<000000004a10c249>] kmalloc_node_trace+0x22/0x60 [<00000000648f7950>] blk_mq_alloc_and_init_hctx+0x289/0x350 [<00000000af06de0e>] blk_mq_realloc_hw_ctxs+0x2fe/0x3d0 [<00000000e00c1872>] blk_mq_init_allocated_queue+0x48c/0x1440 [<00000000d16b4e68>] __blk_mq_alloc_disk+0xc8/0x1c0 [<00000000d10c98c3>] 0xffffffffc450d69d [<00000000b9299f48>] 0xffffffffc4538392 [<0000000061c39ed6>] do_one_initcall+0xd0/0x4f0 [<00000000b389383b>] do_init_module+0x1a4/0x680 [<0000000087cf3542>] load_module+0x6249/0x7110 [<00000000beba61b8>] __do_sys_finit_module+0x140/0x200 [<00000000fdcfff51>] do_syscall_64+0x35/0x80 [<000000003c0f1f71>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 That is because q->ma_ops is set to NULL before blk_release_queue is called. blk_mq_init_queue_data blk_mq_init_allocated_queue blk_mq_realloc_hw_ctxs for (i = 0; i < set->nr_hw_queues; i++) { old_hctx = xa_load(&q->hctx_table, i); if (!blk_mq_alloc_and_init_hctx(.., i, ..)) [1] if (!old_hctx) break; xa_for_each_start(&q->hctx_table, j, hctx, j) blk_mq_exit_hctx(q, set, hctx, j); [2] if (!q->nr_hw_queues) [3] goto err_hctxs; err_exit: q->mq_ops = NULL; [4] blk_put_queue blk_release_queue if (queue_is_mq(q)) [5] blk_mq_release(q); [1]: blk_mq_alloc_and_init_hctx failed at i != 0. [2]: The hctxs allocated by [1] are moved to q->unused_hctx_list and will be cleaned up in blk_mq_release. [3]: q->nr_hw_queues is 0. [4]: Set q->mq_ops to NULL. [5]: queue_is_mq returns false due to [4]. And blk_mq_release will not be called. The hctxs in q->unused_hctx_list are leaked. To fix it, call blk_release_queue in exception path. Fixes: 2f8f1336a48b ("blk-mq: always free hctx after request queue is freed") Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: Chen Jun <chenjun102@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20221031031242.94107-1-chenjun102@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-31block: Fix possible memory leak for rq_wb on add_disk failureChen Zhongjin
kmemleak reported memory leaks in device_add_disk(): kmemleak: 3 new suspected memory leaks unreferenced object 0xffff88800f420800 (size 512): comm "modprobe", pid 4275, jiffies 4295639067 (age 223.512s) hex dump (first 32 bytes): 04 00 00 00 08 00 00 00 01 00 00 00 00 00 00 00 ................ 00 e1 f5 05 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d3662699>] kmalloc_trace+0x26/0x60 [<00000000edc7aadc>] wbt_init+0x50/0x6f0 [<0000000069601d16>] wbt_enable_default+0x157/0x1c0 [<0000000028fc393f>] blk_register_queue+0x2a4/0x420 [<000000007345a042>] device_add_disk+0x6fd/0xe40 [<0000000060e6aab0>] nbd_dev_add+0x828/0xbf0 [nbd] ... It is because the memory allocated in wbt_enable_default() is not released in device_add_disk() error path. Normally, these memory are freed in: del_gendisk() rq_qos_exit() rqos->ops->exit(rqos); wbt_exit() So rq_qos_exit() is called to free the rq_wb memory for wbt_init(). However in the error path of device_add_disk(), only blk_unregister_queue() is called and make rq_wb memory leaked. Add rq_qos_exit() to the error path to fix it. Fixes: 83cbce957446 ("block: add error handling for device_add_disk / add_disk") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20221029071355.35462-1-chenzhongjin@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-31ublk_drv: add ublk_queue_cmd() for cleanupMing Lei
Add helper of ublk_queue_cmd() so that both ublk_queue_rq() and ublk_handle_need_get_data() can reuse this helper. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20221029010432.598367-5-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-31ublk_drv: avoid to touch io_uring cmd in blk_mq io pathMing Lei
io_uring cmd is supposed to be used in ubq daemon context mainly, and we should try to avoid to touch it in ublk io submission context, otherwise this data could become shared between the two contexts, and performance is hurt. So link request into one per-queue list, and use same batching policy of io_uring command, just avoid to touch ucmd in blk-mq io context. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20221029010432.598367-4-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-31ublk_drv: comment on ublk_driver entry of KconfigMing Lei
Add help info for choosing to build ublk_drv as module or builtin. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20221029010432.598367-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-31ublk_drv: return flag of UBLK_F_URING_CMD_COMP_IN_TASK in case of moduleMing Lei
UBLK_F_URING_CMD_COMP_IN_TASK needs to be set and returned to userspace if ublk driver is built as module, otherwise userspace may get wrong flags shown. Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20221029010432.598367-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-28blk-mq: Properly init requests from blk_mq_alloc_request_hctx()block-6.1-2022-10-28John Garry
Function blk_mq_alloc_request_hctx() is missing zeroing/init of rq->bio, biotail, __sector, and __data_len members, which blk_mq_alloc_request() has, so duplicate what we do in blk_mq_alloc_request(). Fixes: 1f5bd336b9150 ("blk-mq: add blk_mq_alloc_request_hctx") Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/1666780513-121650-1-git-send-email-john.garry@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-27Merge tag 'nvme-6.1-2022-10-27' of git://git.infradead.org/nvme into block-6.1Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.1 - make the multipath dma alignment to match the non-multipath one (Keith Busch) - fix a bogus use of sg_init_marker() (Nam Cao) - fix circulr locking in nvme-tcp (Sagi Grimberg)" * tag 'nvme-6.1-2022-10-27' of git://git.infradead.org/nvme: nvme-multipath: set queue dma alignment to 3 nvme-tcp: fix possible circular locking when deleting a controller under memory pressure nvme-tcp: replace sg_init_marker() with sg_init_table()
2022-10-27blk-mq: don't add non-pt request with ->end_io to batchMing Lei
dm-rq implements ->end_io callback for request issued to underlying queue, and it isn't passthrough request. Commit ab3e1d3bbab9 ("block: allow end_io based requests in the completion batch handling") doesn't clear rq->bio and rq->__data_len for request with ->end_io in blk_mq_end_request_batch(), and this way is actually dangerous, but so far it is only for nvme passthrough request. dm-rq needs to clean up remained bios in case of partial completion, and req->bio is required, then use-after-free is triggered, so the underlying clone request can't be completed in blk_mq_end_request_batch. Fix panic by not adding such request into batch list, and the issue can be triggered simply by exposing nvme pci to dm-mpath simply. Fixes: ab3e1d3bbab9 ("block: allow end_io based requests in the completion batch handling") Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@kernel.org> Reported-by: Changhui Zhong <czhong@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20221027085709.513175-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-27rbd: fix possible memory leak in rbd_sysfs_init()Yang Yingliang
If device_register() returns error in rbd_sysfs_init(), name of kobject which is allocated in dev_set_name() called in device_add() is leaked. As comment of device_add() says, it should call put_device() to drop the reference count that was set in device_initialize() when it fails, so the name can be freed in kobject_cleanup(). Fault injection test can trigger this problem: unreferenced object 0xffff88810173aa78 (size 8): comm "modprobe", pid 247, jiffies 4294714278 (age 31.789s) hex dump (first 8 bytes): 72 62 64 00 81 88 ff ff rbd..... backtrace: [<00000000f58fae56>] __kmalloc_node_track_caller+0x44/0x1b0 [<00000000bdd44fe7>] kstrdup+0x3a/0x70 [<00000000f7844d0b>] kstrdup_const+0x63/0x80 [<000000001b0a0eeb>] kvasprintf_const+0x10b/0x190 [<00000000a47bd894>] kobject_set_name_vargs+0x56/0x150 [<00000000d5edbf18>] dev_set_name+0xab/0xe0 [<00000000f5153e80>] device_add+0x106/0x1f20 Fixes: dfc5606dc513 ("rbd: replace the rbd sysfs interface") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20221027091918.2294132-1-yangyingliang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-25nvme-multipath: set queue dma alignment to 3Keith Busch
NVMe spec requires all transports support dword aligned addresses, which is already set in the namespace request_queue. Set the same limit in the multipath device's request_queue as well. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-25nvme-tcp: fix possible circular locking when deleting a controller under ↵Sagi Grimberg
memory pressure When destroying a queue, when calling sock_release, the network stack might need to allocate an skb to send a FIN/RST. When that happens during memory pressure, there is a need to reclaim memory, which in turn may ask the nvme-tcp device to write out dirty pages, however this is not possible due to a ctrl teardown that is going on. Set PF_MEMALLOC to the task that releases the socket to grant access to PF_MEMALLOC reserves. In addition, do the same for the nvme-tcp thread as this may also originate from the swap itself and should be more resilient to memory pressure situations. This fixes the following lockdep complaint: -- ====================================================== WARNING: possible circular locking dependency detected 6.0.0-rc2+ #25 Tainted: G W ------------------------------------------------------ kswapd0/92 is trying to acquire lock: ffff888114003240 (sk_lock-AF_INET-NVME){+.+.}-{0:0}, at: tcp_sendpage+0x23/0xa0 but task is already holding lock: ffffffff97e95ca0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x987/0x10d0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0x11e/0x160 kmem_cache_alloc_node+0x44/0x530 __alloc_skb+0x158/0x230 tcp_send_active_reset+0x7e/0x730 tcp_disconnect+0x1272/0x1ae0 __tcp_close+0x707/0xd90 tcp_close+0x26/0x80 inet_release+0xfa/0x220 sock_release+0x85/0x1a0 nvme_tcp_free_queue+0x1fd/0x470 [nvme_tcp] nvme_do_delete_ctrl+0x130/0x13d [nvme_core] nvme_sysfs_delete.cold+0x8/0xd [nvme_core] kernfs_fop_write_iter+0x356/0x530 vfs_write+0x4e8/0xce0 ksys_write+0xfd/0x1d0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #0 (sk_lock-AF_INET-NVME){+.+.}-{0:0}: __lock_acquire+0x2a0c/0x5690 lock_acquire+0x18e/0x4f0 lock_sock_nested+0x37/0xc0 tcp_sendpage+0x23/0xa0 inet_sendpage+0xad/0x120 kernel_sendpage+0x156/0x440 nvme_tcp_try_send+0x48a/0x2630 [nvme_tcp] nvme_tcp_queue_rq+0xefb/0x17e0 [nvme_tcp] __blk_mq_try_issue_directly+0x452/0x660 blk_mq_plug_issue_direct.constprop.0+0x207/0x700 blk_mq_flush_plug_list+0x6f5/0xc70 __blk_flush_plug+0x264/0x410 blk_finish_plug+0x4b/0xa0 shrink_lruvec+0x1263/0x1ea0 shrink_node+0x736/0x1a80 balance_pgdat+0x740/0x10d0 kswapd+0x5f2/0xaf0 kthread+0x256/0x2f0 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(sk_lock-AF_INET-NVME); lock(fs_reclaim); lock(sk_lock-AF_INET-NVME); *** DEADLOCK *** 3 locks held by kswapd0/92: #0: ffffffff97e95ca0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x987/0x10d0 #1: ffff88811f21b0b0 (q->srcu){....}-{0:0}, at: blk_mq_flush_plug_list+0x6b3/0xc70 #2: ffff888170b11470 (&queue->send_mutex){+.+.}-{3:3}, at: nvme_tcp_queue_rq+0xeb9/0x17e0 [nvme_tcp] Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Reported-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-25nvme-tcp: replace sg_init_marker() with sg_init_table()Nam Cao
In nvme_tcp_ddgst_update(), sg_init_marker() is called with an uninitialized scatterlist. This is probably fine, but gcc complains: CC [M] drivers/nvme/host/tcp.o In file included from ./include/linux/dma-mapping.h:10, from ./include/linux/skbuff.h:31, from ./include/net/net_namespace.h:43, from ./include/linux/netdevice.h:38, from ./include/net/sock.h:46, from drivers/nvme/host/tcp.c:12: In function ‘sg_mark_end’, inlined from ‘sg_init_marker’ at ./include/linux/scatterlist.h:356:2, inlined from ‘nvme_tcp_ddgst_update’ at drivers/nvme/host/tcp.c:390:2: ./include/linux/scatterlist.h:234:11: error: ‘sg.page_link’ is used uninitialized [-Werror=uninitialized] 234 | sg->page_link |= SG_END; | ~~^~~~~~~~~~~ drivers/nvme/host/tcp.c: In function ‘nvme_tcp_ddgst_update’: drivers/nvme/host/tcp.c:388:28: note: ‘sg’ declared here 388 | struct scatterlist sg; | ^~ cc1: all warnings being treated as errors Use sg_init_table() instead, which basically memset the scatterlist to zero first before calling sg_init_marker(). Signed-off-by: Nam Cao <namcaov@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-22block: fix memory leak for elevator on add_disk failureYu Kuai
The default elevator is allocated in the beginning of device_add_disk(), however, it's not freed in the following error path. Fixes: 50e34d78815e ("block: disable the elevator int del_gendisk") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20221022021615.2756171-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-20blktrace: remove unnessary stop block trace in 'blk_trace_shutdown'block-6.1-2022-10-20Ye Bin
As previous commit, 'blk_trace_cleanup' will stop block trace if block trace's state is 'Blktrace_running'. So remove unnessary stop block trace in 'blk_trace_shutdown'. Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20221019033602.752383-4-yebin@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-20blktrace: fix possible memleak in '__blk_trace_remove'Ye Bin
When test as follows: step1: ioctl(sda, BLKTRACESETUP, &arg) step2: ioctl(sda, BLKTRACESTART, NULL) step3: ioctl(sda, BLKTRACETEARDOWN, NULL) step4: ioctl(sda, BLKTRACESETUP, &arg) Got issue as follows: debugfs: File 'dropped' in directory 'sda' already present! debugfs: File 'msg' in directory 'sda' already present! debugfs: File 'trace0' in directory 'sda' already present! And also find syzkaller report issue like "KASAN: use-after-free Read in relay_switch_subbuf" "https://syzkaller.appspot.com/bug?id=13849f0d9b1b818b087341691be6cc3ac6a6bfb7" If remove block trace without stop(BLKTRACESTOP) block trace, '__blk_trace_remove' will just set 'q->blk_trace' with NULL. However, debugfs file isn't removed, so will report file already present when call BLKTRACESETUP. static int __blk_trace_remove(struct request_queue *q) { struct blk_trace *bt; bt = rcu_replace_pointer(q->blk_trace, NULL, lockdep_is_held(&q->debugfs_mutex)); if (!bt) return -EINVAL; if (bt->trace_state != Blktrace_running) blk_trace_cleanup(q, bt); return 0; } If do test as follows: step1: ioctl(sda, BLKTRACESETUP, &arg) step2: ioctl(sda, BLKTRACESTART, NULL) step3: ioctl(sda, BLKTRACETEARDOWN, NULL) step4: remove sda There will remove debugfs directory which will remove recursively all file under directory. >> blk_release_queue >> debugfs_remove_recursive(q->debugfs_dir) So all files which created in 'do_blk_trace_setup' are removed, and 'dentry->d_inode' is NULL. But 'q->blk_trace' is still in 'running_trace_lock', 'trace_note_tsk' will traverse 'running_trace_lock' all nodes. >>trace_note_tsk >> trace_note >> relay_reserve >> relay_switch_subbuf >> d_inode(buf->dentry)->i_size To solve above issues, reference commit '5afedf670caf', call 'blk_trace_cleanup' unconditionally in '__blk_trace_remove' and first stop block trace in 'blk_trace_cleanup'. Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20221019033602.752383-3-yebin@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-20blktrace: introduce 'blk_trace_{start,stop}' helperYe Bin
Introduce 'blk_trace_{start,stop}' helper. No functional changed. Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20221019033602.752383-2-yebin@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-20bio: safeguard REQ_ALLOC_CACHE bio putPavel Begunkov
bio_put() with REQ_ALLOC_CACHE assumes that it's executed not from an irq context. Let's add a warning if the invariant is not respected, especially since there is a couple of places removing REQ_POLLED by hand without also clearing REQ_ALLOC_CACHE. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/558d78313476c4e9c233902efa0092644c3d420a.1666122465.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-20block, bfq: remove unused variable for bfq_queueYuwei Guan
it defined in d0edc2473be9d, but there's nowhere to use it, so remove it. Signed-off-by: Yuwei Guan <Yuwei.Guan@zeekrlife.com> Acked-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20221018030139.159-1-Yuwei.Guan@zeekrlife.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-20drbd: only clone bio if we have a backing deviceChristoph Böhmwalder
Commit c347a787e34cb (drbd: set ->bi_bdev in drbd_req_new) moved a bio_set_dev call (which has since been removed) to "earlier", from drbd_request_prepare to drbd_req_new. The problem is that this accesses device->ldev->backing_bdev, which is not NULL-checked at this point. When we don't have an ldev (i.e. when the DRBD device is diskless), this leads to a null pointer deref. So, only allocate the private_bio if we actually have a disk. This is also a small optimization, since we don't clone the bio to only to immediately free it again in the diskless case. Fixes: c347a787e34cb ("drbd: set ->bi_bdev in drbd_req_new") Co-developed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Co-developed-by: Joel Colledge <joel.colledge@linbit.com> Signed-off-by: Joel Colledge <joel.colledge@linbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20221020085205.129090-1-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-20Merge tag 'nvme-6.1-2022-10-22' of git://git.infradead.org/nvme into block-6.1Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.1 - fix nvme-hwmon for DMA non-cohehrent architectures (Serge Semin) - add a nvme-hwmong maintainer (Christoph Hellwig) - fix error pointer dereference in error handling (Dan Carpenter) - fix invalid memory reference in nvmet_subsys_attr_qid_max_show (Daniel Wagner) - don't limit the DMA segment size in nvme-apple (Russell King) - fix workqueue MEM_RECLAIM flushing dependency (Sagi Grimberg) - disable write zeroes on various Kingston SSDs (Xander Li)" * tag 'nvme-6.1-2022-10-22' of git://git.infradead.org/nvme: nvmet: fix invalid memory reference in nvmet_subsys_attr_qid_max_show nvmet: fix workqueue MEM_RECLAIM flushing dependency nvme-hwmon: kmalloc the NVME SMART log buffer nvme-hwmon: consistently ignore errors from nvme_hwmon_init nvme: add Guenther as nvme-hwmon maintainer nvme-apple: don't limit DMA segement size nvme-pci: disable write zeroes on various Kingston SSD nvme: fix error pointer dereference in error handling
2022-10-19ublk_drv: use flexible-array member instead of zero-length arrayYushan Zhou
Eliminate the following coccicheck warning: ./drivers/block/ublk_drv.c:127:16-19: WARNING use flexible-array member instead Signed-off-by: Yushan Zhou <katrinzhou@tencent.com> Link: https://lore.kernel.org/r/20221018100132.355393-1-zys.zljxml@gmail.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-19nvmet: fix invalid memory reference in nvmet_subsys_attr_qid_max_showDaniel Wagner
The item passed into nvmet_subsys_attr_qid_max_show is not a member of struct nvmet_port, it is part of nvmet_subsys. Hence, don't try to dereference it as struct nvme_ctrl pointer. Fixes: 3e980f5995e0 ("nvmet: Expose max queues to configfs") Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20220913064203.133536-1-dwagner@suse.de Signed-off-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-19nvmet: fix workqueue MEM_RECLAIM flushing dependencySagi Grimberg
The keep alive timer needs to stay on nvmet_wq, and not modified to reschedule on the system_wq. This fixes a warning: ------------[ cut here ]------------ workqueue: WQ_MEM_RECLAIM nvmet-wq:nvmet_rdma_release_queue_work [nvmet_rdma] is flushing !WQ_MEM_RECLAIM events:nvmet_keep_alive_timer [nvmet] WARNING: CPU: 3 PID: 1086 at kernel/workqueue.c:2628 check_flush_dependency+0x16c/0x1e0 Reported-by: Yi Zhang <yi.zhang@redhat.com> Fixes: 8832cf922151 ("nvmet: use a private workqueue instead of the system workqueue") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-19nvme-hwmon: kmalloc the NVME SMART log bufferSerge Semin
Recent commit 52fde2c07da6 ("nvme: set dma alignment to dword") has caused a regression on our platform. It turned out that the nvme_get_log() method invocation caused the nvme_hwmon_data structure instance corruption. In particular the nvme_hwmon_data.ctrl pointer was overwritten either with zeros or with garbage. After some research we discovered that the problem happened even before the actual NVME DMA execution, but during the buffer mapping. Since our platform is DMA-noncoherent, the mapping implied the cache-line invalidations or write-backs depending on the DMA-direction parameter. In case of the NVME SMART log getting the DMA was performed from-device-to-memory, thus the cache-invalidation was activated during the buffer mapping. Since the log-buffer isn't cache-line aligned, the cache-invalidation caused the neighbour data to be discarded. The neighbouring data turned to be the data surrounding the buffer in the framework of the nvme_hwmon_data structure. In order to fix that we need to make sure that the whole log-buffer is defined within the cache-line-aligned memory region so the cache-invalidation procedure wouldn't involve the adjacent data. One of the option to guarantee that is to kmalloc the DMA-buffer [1]. Seeing the rest of the NVME core driver prefer that method it has been chosen to fix this problem too. Note after a deeper researches we found out that the denoted commit wasn't a root cause of the problem. It just revealed the invalidity by activating the DMA-based NVME SMART log getting performed in the framework of the NVME hwmon driver. The problem was here since the initial commit of the driver. [1] Documentation/core-api/dma-api-howto.rst Fixes: 400b6a7b13a3 ("nvme: Add hardware monitoring support") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-19nvme-hwmon: consistently ignore errors from nvme_hwmon_initChristoph Hellwig
An NVMe controller works perfectly fine even when the hwmon initialization fails. Stop returning errors that do not come from a controller reset from nvme_hwmon_init to handle this case consistently. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2022-10-19nvme: add Guenther as nvme-hwmon maintainerChristoph Hellwig
Given that non of the overall NVMe maintainers knows this code very deeply it probably makes sense to add Guenther as an additional MAINTAINER for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Guenter Roeck <linux@roeck-us.net>
2022-10-19nvme-apple: don't limit DMA segement sizeRussell King (Oracle)
NVMe uses PRPs for data transfers and has no specific limit for a single DMA segement. Limiting the size will cause problems because the block layer assumes PRP-ish devices using a virt boundary mask don't have a segment limit. And while this is true, we also really need to tell the DMA mapping layer about it, otherwise dma-debug will trip over it. Fixes: 5bd2927aceba ("nvme-apple: Add initial Apple SoC NVMe driver") Suggested-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [hch: rewrote the commit message based on the PCIe commit] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Sven Peter <sven@svenpeter.dev>
2022-10-19nvme-pci: disable write zeroes on various Kingston SSDXander Li
Kingston SSDs do support NVMe Write_Zeroes cmd but take long time to process. The firmware version is locked by these SSDs, we can not expect firmware improvement, so disable Write_Zeroes cmd. Signed-off-by: Xander Li <xander_li@kingston.com.tw> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-19nvme: fix error pointer dereference in error handlingDan Carpenter
There is typo here so it releases the wrong variable. "ctrl->admin_q" was intended instead of "ctrl->fabrics_q". Fixes: fe60e8c53411 ("nvme: add common helpers to allocate and free tagsets") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-18Documentation: document ublk user recovery featureZiyangZhang
Add documentation for user recovery feature of ublk subsystem. Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20221018045346.99706-2-ZiyangZhang@linux.alibaba.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-16blk-mq: fix null pointer dereference in blk_mq_clear_rq_mapping()Yu Kuai
Our syzkaller report a null pointer dereference, root cause is following: __blk_mq_alloc_map_and_rqs set->tags[hctx_idx] = blk_mq_alloc_map_and_rqs blk_mq_alloc_map_and_rqs blk_mq_alloc_rqs // failed due to oom alloc_pages_node // set->tags[hctx_idx] is still NULL blk_mq_free_rqs drv_tags = set->tags[hctx_idx]; // null pointer dereference is triggered blk_mq_clear_rq_mapping(drv_tags, ...) This is because commit 63064be150e4 ("blk-mq: Add blk_mq_alloc_map_and_rqs()") merged the two steps: 1) set->tags[hctx_idx] = blk_mq_alloc_rq_map() 2) blk_mq_alloc_rqs(..., set->tags[hctx_idx]) into one step: set->tags[hctx_idx] = blk_mq_alloc_map_and_rqs() Since tags is not initialized yet in this case, fix the problem by checking if tags is NULL pointer in blk_mq_clear_rq_mapping(). Fixes: 63064be150e4 ("blk-mq: Add blk_mq_alloc_map_and_rqs()") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/20221011142253.4015966-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-12Merge tag 'nvme-6.1-2022-10-12' of git://git.infradead.org/nvme into block-6.1block-6.1-2022-13-10block-6.1-2022-10-13Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.1 - add NVME_QUIRK_BOGUS_NID for Lexar NM760 (Abhijit) - avoid the deepest sleep state on ZHITAI TiPro5000 SSDs (Xi Ruoyao) - fix possible hang caused during ctrl deletion (Sagi Grimberg) - fix possible hang in live ns resize with ANA access (Sagi Grimberg)" * tag 'nvme-6.1-2022-10-12' of git://git.infradead.org/nvme: nvme-multipath: fix possible hang in live ns resize with ANA access nvme-pci: avoid the deepest sleep state on ZHITAI TiPro5000 SSDs nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM760 nvme-tcp: fix possible hang caused during ctrl deletion nvme-rdma: fix possible hang caused during ctrl deletion
2022-10-12nvme-multipath: fix possible hang in live ns resize with ANA accessSagi Grimberg
When we revalidate paths as part of ns size change (as of commit e7d65803e2bb), it is possible that during the path revalidation, the only paths that is IO capable (i.e. optimized/non-optimized) are the ones that ns resize was not yet informed to the host, which will cause inflight requests to be requeued (as we have available paths but none are IO capable). These requests on the requeue list are waiting for someone to resubmit them at some point. The IO capable paths will eventually notify the ns resize change to the host, but there is nothing that will kick the requeue list to resubmit the queued requests. Fix this by always kicking the requeue list, and if no IO capable path exists, these requests will be queued again. A typical log that indicates that IOs are requeued: -- nvme nvme1: creating 4 I/O queues. nvme nvme1: new ctrl: "testnqn1" nvme nvme2: creating 4 I/O queues. nvme nvme2: mapped 4/0/0 default/read/poll queues. nvme nvme2: new ctrl: NQN "testnqn1", addr 127.0.0.1:8009 nvme nvme1: rescanning namespaces. nvme1n1: detected capacity change from 2097152 to 4194304 block nvme1n1: no usable path - requeuing I/O block nvme1n1: no usable path - requeuing I/O block nvme1n1: no usable path - requeuing I/O block nvme1n1: no usable path - requeuing I/O block nvme1n1: no usable path - requeuing I/O block nvme1n1: no usable path - requeuing I/O block nvme1n1: no usable path - requeuing I/O block nvme1n1: no usable path - requeuing I/O block nvme1n1: no usable path - requeuing I/O block nvme1n1: no usable path - requeuing I/O nvme nvme2: rescanning namespaces. -- Reported-by: Yogev Cohen <yogev@lightbitslabs.com> Fixes: e7d65803e2bb ("nvme-multipath: revalidate paths during rescan") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Cc: <stable@vger.kernel.org> # v5.15+ Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-12nvme-pci: avoid the deepest sleep state on ZHITAI TiPro5000 SSDsXi Ruoyao
ZHITAI TiPro5000 SSDs has the same APST sleep problem as its cousin, TiPro7000. The quirk for TiPro7000 has been added in commit 6b961bce50e4 ("nvme-pci: avoid the deepest sleep state on ZHITAI TiPro7000 SSDs"), use the same quirk for TiPro5000. The ASPT data from "nvme id-ctrl /dev/nvme1": vid : 0x1e49 ssvid : 0x1e49 sn : ZTA21T0KA2227304LM mn : ZHITAI TiPlus5000 1TB fr : ZTA09139 [...] ps 0 : mp:6.50W operational enlat:0 exlat:0 rrt:0 rrl:0 rwt:0 rwl:0 idle_power:- active_power:- ps 1 : mp:5.80W operational enlat:0 exlat:0 rrt:1 rrl:1 rwt:1 rwl:1 idle_power:- active_power:- ps 2 : mp:3.60W operational enlat:0 exlat:0 rrt:2 rrl:2 rwt:2 rwl:2 idle_power:- active_power:- ps 3 : mp:0.0500W non-operational enlat:5000 exlat:10000 rrt:3 rrl:3 rwt:3 rwl:3 idle_power:- active_power:- ps 4 : mp:0.0025W non-operational enlat:8000 exlat:45000 rrt:4 rrl:4 rwt:4 rwl:4 idle_power:- active_power:- Reported-and-tested-by: Chang Feng <flukehn@gmail.com> Signed-off-by: Xi Ruoyao <xry111@xry111.site> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-12nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM760Abhijit
Add a quirk to fix Lexar NM760 SSD drives reporting duplicate nsids. Signed-off-by: Abhijit <abhijit@abhijittomar.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-14 09:37:37 +0000