| Age | Commit message (Collapse) | Author |
|---|
|
After the bio has been updated to represent the remaining sectors, reset
bi_done so bio_rewind_iter() does not rewind further than it should.
This resolves a bio_integrity_process() failure on reads where the
original request was split.
Fixes: 63573e359d05 ("bio-integrity: Restore original iterator on verify stage")
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio_iov_iter_get_pages() currently only adds pages for the next non-zero
segment from the iov_iter to the bio. That's suboptimal for callers,
which typically try to pin as many pages as fit into the bio. This patch
converts the current bio_iov_iter_get_pages() into a static helper, and
introduces a new helper that allocates as many pages as
1) fit into the bio,
2) are present in the iov_iter,
3) and can be pinned by MM.
Error is returned only if zero pages could be pinned. Because of 3), a
zero return value doesn't necessarily mean all pages have been pinned.
Callers that have to pin every page in the iov_iter must still call this
function in a loop (this is currently the case).
This change matters most for __blkdev_direct_IO_simple(), which calls
bio_iov_iter_get_pages() only once. If it obtains less pages than
requested, it returns a "short write" or "short read", and
__generic_file_write_iter() falls back to buffered writes, which may
lead to data corruption.
Fixes: 72ecad22d9f1 ("block: support a full bio worth of IO for simplified bdev direct-io")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fixes: 72ecad22d9f1 ("block: support a full bio worth of IO for simplified bdev direct-io")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the last page of the bio is not "full", the length of the last
vector slot needs to be corrected. This slot has the index
(bio->bi_vcnt - 1), but only in bio->bi_io_vec. In the "bv" helper
array, which is shifted by the value of bio->bi_vcnt at function
invocation, the correct index is (nr_pages - 1).
v2: improved readability following suggestions from Ming Lei.
v3: followed a formatting suggestion from Christoph Hellwig.
Fixes: 2cefe4dbaadf ("block: add bio_iov_iter_get_pages()")
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull NVMe fixes from Christoph:
"Two small fixes each for the FC code and the target."
* 'nvme-4.18' of git://git.infradead.org/nvme:
nvmet: only check for filebacking on -ENOTBLK
nvmet: fixup crash on NULL device path
nvme: if_ready checks to fail io to deleting controller
nvmet-fc: fix target sgl list on large transfers
|
|
We only need to check for a file-backed namespace if
nvmet_bdev_ns_enable() returns -ENOTBLK. For any other error
it's pointless as the open() error will remain the same.
Fixes: d5eff33e ("nvmet: add simple file backed ns support")
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When writing an empty string into the device_path attribute the kernel
will crash with
nvmet: failed to open block device (null): (-22)
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
This patch sanitizes the error handling for invalid device path settings.
Fixes: a07b4970 ("nvmet: add a generic NVMe target")
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The scsi block layer requires requests claimed by the error handling be
completed by the error handler. A previous commit allowed completions
to proceed for blk-mq, breaking that assumption.
This patch prevents completions that may race with the timeout handler
by marking the state to complete, restoring the previous behavior.
Fixes: 12f5b931 ("blk-mq: Remove generation seqeunce")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is preparing for drivers that want to directly alter the state of
their requests. No functional change here.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The revised if_ready checks skipped over the case of returning error when
the controller is being deleted. Instead it was returning BUSY, which
caused the ios to retry, which caused the ns delete to hang waiting for
the ios to drain.
Stack trace of hang looks like:
kworker/u64:2 D 0 74 2 0x80000000
Workqueue: nvme-delete-wq nvme_delete_ctrl_work [nvme_core]
Call Trace:
? __schedule+0x26d/0x820
schedule+0x32/0x80
blk_mq_freeze_queue_wait+0x36/0x80
? remove_wait_queue+0x60/0x60
blk_cleanup_queue+0x72/0x160
nvme_ns_remove+0x106/0x140 [nvme_core]
nvme_remove_namespaces+0x7e/0xa0 [nvme_core]
nvme_delete_ctrl_work+0x4d/0x80 [nvme_core]
process_one_work+0x160/0x350
worker_thread+0x1c3/0x3d0
kthread+0xf5/0x130
? process_one_work+0x350/0x350
? kthread_bind+0x10/0x10
ret_from_fork+0x1f/0x30
Extend nvmf_fail_nonready_command() to supply the controller pointer so
that the controller state can be looked at. Fail any io to a controller
that is deleting.
Fixes: 3bc32bb1186c ("nvme-fabrics: refactor queue ready check")
Fixes: 35897b920c8a ("nvme-fabrics: fix and refine state checks in __nvmf_check_ready")
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
|
|
The existing code to carve up the sg list expected an sg element-per-page
which can be very incorrect with iommu's remapping multiple memory pages
to fewer bus addresses. To hit this error required a large io payload
(greater than 256k) and a system that maps on a per-page basis. It's
possible that large ios could get by fine if the system condensed the
sgl list into the first 64 elements.
This patch corrects the sg list handling by specifically walking the
sg list element by element and attempting to divide the transfer up
on a per-sg element boundary. While doing so, it still tries to keep
sequences under 256k, but will exceed that rule if a single sg element
is larger than 256k.
Fixes: 48fa362b6c3f ("nvmet-fc: simplify sg list handling")
Cc: <stable@vger.kernel.org> # 4.14
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If the server or network is misbehaving and we get an unexpected reply
we can sometimes miss the request not being started and wait on a
request and never get a response, or even double complete the same
request. Fix this by replacing the send_complete completion with just a
per command lock. Add a per command cookie as well so that we can know
if we're getting a double completion for a previous event. Also check
to make sure we dont have REQUEUED set as that means we raced with the
timeout handler and need to just let the retry occur.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We can race with the snd timeout and the per-request timeout and end up
requeuing the same request twice. We can't use the send_complete
completion to tell if everything is ok because we hold the tx_lock
during send, so the timeout stuff will block waiting to mark the socket
dead, and we could be marked complete and still requeue. Instead add a
flag to the socket so we know whether we've been requeued yet.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix a regression introduced in Linux kernel 4.17 where sending a SCSI
command that does not transfer data (such as TEST UNIT READY) via
/dev/bsg/* results in EINVAL.
Fixes: 17cb960f29c2 ("bsg: split handling of SCSI CDBs vs transport requeues")
Cc: <stable@vger.kernel.org> # 4.17+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This change adds LOOP_SET_BLOCK_SIZE as one of the supported ioctls
in lo_compat_ioctl. It only takes an unsigned long argument, and
in practice a 32-bit value works fine.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We have
struct drbd_requests { ... struct bio *private_bio; ... }
to hold a bio clone for local submission.
On local IO completion, we put that bio, and in case we want to use the
result later, we overload that member to hold the ERR_PTR() of the
completion result,
Which, before v4.3, used to be the passed in "int error",
so we could first bio_put(), then assign.
v4.3-rc1~100^2~21 4246a0b63bd8 block: add a bi_error field to struct bio
changed that:
bio_put(req->private_bio);
- req->private_bio = ERR_PTR(error);
+ req->private_bio = ERR_PTR(bio->bi_error);
Which introduces an access after free,
because it was non obvious that req->private_bio == bio.
Impact of that was mostly unnoticable, because we only use that value
in a multiple-failure case, and even then map any "unexpected" error
code to EIO, so worst case we could potentially mask a more specific
error with EIO in a multiple failure case.
Unless the pointed to memory region was unmapped, as is the case with
CONFIG_DEBUG_PAGEALLOC, in which case this results in
BUG: unable to handle kernel paging request
v4.13-rc1~70^2~75 4e4cbee93d56 block: switch bios to blk_status_t
changes it further to
bio_put(req->private_bio);
req->private_bio = ERR_PTR(blk_status_to_errno(bio->bi_status));
And blk_status_to_errno() now contains a WARN_ON_ONCE() for unexpected
values, which catches this "sometimes", if the memory has been reused
quickly enough for other things.
Should also go into stable since 4.3, with the trivial change around 4.13.
Cc: stable@vger.kernel.org
Fixes: 4246a0b63bd8 block: add a bi_error field to struct bio
Reported-by: Sarah Newman <srn@prgmr.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This was introduced more than a decade ago when sg chaining was
added, but we never really caught anything with it. The scatterlist
entry size can be critical, since drivers allocate it, so remove
the magic member. Recently it's been triggering allocation stalls
and failures in NVMe.
Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull single NVMe fix from Christoph.
* 'nvme-4.18' of git://git.infradead.org/nvme:
nvme-rdma: fix possible double free of controller async event buffer
|
|
Fix the test that verifies whether bio_op(bio) represents a discard
or write zeroes operation. Compile-tested only.
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Fixes: 7435e9018f91 ("drbd: zero-out partial unaligned discards on local backend")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some devices have different queue limits depending on the type of IO. A
classic case is SATA NCQ, where some commands can queue, but others
cannot. If we have NCQ commands inflight and encounter a non-queueable
command, the driver returns busy. Currently we attempt to dispatch more
from the scheduler, if we were able to queue some commands. But for the
case where we ended up stopping due to BUSY, we should not attempt to
retrieve more from the scheduler. If we do, we can get into a situation
where we attempt to queue a non-queueable command, get BUSY, then
successfully retrieve more commands from that scheduler and queue those.
This can repeat forever, starving the non-queuable command indefinitely.
Fix this by NOT attempting to pull more commands from the scheduler, if
we get a BUSY return. This should also be more optimal in terms of
letting requests stay in the scheduler for as long as possible, if we
get a BUSY due to the regular out-of-tags condition.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch avoids that removing a path controlled by the dm-mpath driver
while mkfs is running triggers the following kernel bug:
kernel BUG at block/blk-core.c:3347!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 20 PID: 24369 Comm: mkfs.ext4 Not tainted 4.18.0-rc1-dbg+ #2
RIP: 0010:blk_end_request_all+0x68/0x70
Call Trace:
<IRQ>
dm_softirq_done+0x326/0x3d0 [dm_mod]
blk_done_softirq+0x19b/0x1e0
__do_softirq+0x128/0x60d
irq_exit+0x100/0x110
smp_call_function_single_interrupt+0x90/0x330
call_function_single_interrupt+0xf/0x20
</IRQ>
Fixes: f9d03f96b988 ("block: improve handling of the magic discard payload")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If reconnect/reset failed where the controller async event buffer
was freed, we might end up freeing it again as we call
nvme_rdma_destroy_admin_queue again in the remove path. Given that
the sequence is guaranteed to serialize by .ctrl_stop, we simply
set ctrl->async_event_sqe.data to NULL and don't free it in future
visits.
Reported-by: Max Gurtovoy <maxg@mellanox.com>
Tested-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
A device may have boundary restrictions where the number of sectors
between boundaries exceeds its max transfer size. In this case, we need
to cap the max size to the smaller of the two limits.
Reported-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Tested-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make sure that RQF_TIMED_OUT is cleared when a request is reused
after a block driver timeout handler has returned BLK_EH_DONE.
Fixes: da6612673988 ("blk-mq: don't time out requests again that are in the timeout handler")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Andrew Randrianasulu <randrianasulu@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
syzbot is reporting NULL pointer dereference at wb_workfn() [1] due to
wb->bdi->dev being NULL. And Dmitry confirmed that wb->state was
WB_shutting_down after wb->bdi->dev became NULL. This indicates that
unregister_bdi() failed to call wb_shutdown() on one of wb objects.
The problem is in cgwb_bdi_unregister() which does cgwb_kill() and thus
drops bdi's reference to wb structures before going through the list of
wbs again and calling wb_shutdown() on each of them. This way the loop
iterating through all wbs can easily miss a wb if that wb has already
passed through cgwb_remove_from_bdi_list() called from wb_shutdown()
from cgwb_release_workfn() and as a result fully shutdown bdi although
wb_workfn() for this wb structure is still running. In fact there are
also other ways cgwb_bdi_unregister() can race with
cgwb_release_workfn() leading e.g. to use-after-free issues:
CPU1 CPU2
cgwb_bdi_unregister()
cgwb_kill(*slot);
cgwb_release()
queue_work(cgwb_release_wq, &wb->release_work);
cgwb_release_workfn()
wb = list_first_entry(&bdi->wb_list, ...)
spin_unlock_irq(&cgwb_lock);
wb_shutdown(wb);
...
kfree_rcu(wb, rcu);
wb_shutdown(wb); -> oops use-after-free
We solve these issues by synchronizing writeback structure shutdown from
cgwb_bdi_unregister() with cgwb_release_workfn() using a new mutex. That
way we also no longer need synchronization using WB_shutting_down as the
mutex provides it for CONFIG_CGROUP_WRITEBACK case and without
CONFIG_CGROUP_WRITEBACK wb_shutdown() can be called only once from
bdi_unregister().
Reported-by: syzbot <syzbot+4a7438e774b21ddd8eca@syzkaller.appspotmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.
Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.
This simplifies the dependencies, and allows to improve compile-testing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull NVMe fixes from Christoph:
"Various relatively small fixes, mostly to fix error handling of various
sorts."
* 'nvme-4.18' of git://git.infradead.org/nvme:
nvme-pci: limit max IO size and segments to avoid high order allocations
nvme-pci: move nvme_kill_queues to nvme_remove_dead_ctrl
nvme-fc: release io queues to allow fast fail
nvmet: reset keep alive timer in controller enable
nvme-rdma: don't override opts->queue_size
nvme-rdma: Fix command completion race at error recovery
nvme-rdma: fix possible free of a non-allocated async event buffer
nvme-rdma: fix possible double free condition when failing to create a controller
|
|
nvme requires an sg table allocation for each request. If the request
is large, then the allocation can become quite large. For instance,
with our default software settings of 1280KB IO size, we'll need
10248 bytes of sg table. That turns into a 2nd order allocation,
which we can't always guarantee. If we fail the allocation, blk-mq
will retry it later. But there's no guarantee that we'll EVER be
able to allocate that much contigious memory.
Limit the IO size such that we never need more than a single page
of memory. That's a lot faster and more reliable. Then back that
allocation with a mempool, so that we know we'll always be able
to succeed the allocation at some point.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
There is race between nvme_remove and nvme_reset_work that can
lead to io hang.
nvme_remove nvme_reset_work
-> nvme_remove_dead_ctrl
-> nvme_dev_disable
-> quiesce request_queue
-> queue remove_work
-> cancel_work_sync reset_work
-> nvme_remove_namespaces
-> splice ctrl->namespaces
nvme_remove_dead_ctrl_work
-> nvme_kill_queues
-> nvme_ns_remove do nothing
-> blk_cleanup_queue
-> blk_freeze_queue
Finally, the request_queue is quiesced state when wait freeze,
we will get io hang here. To fix it, move the nvme_kill_queues
from nvme_remove_dead_ctrl_work to nvme_remove_dead_ctrl.
Suggested-by: Keith Busch <keith.busch@linux.intel.com>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Rather than leaving io queues quiesced after tearing down an association,
restart them. This allows ios to be replayed, with fastfail ios terminating
and non-fastfail getting into loops of retry.
This follows rdma's lead.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimber.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If NBD_DISCONNECT_ON_CLOSE is set on a device, then the driver will
issue a disconnect from nbd_release if the device has no remaining
bdev->bd_openers.
Fix ret val so reconfigure with only setting the flag succeeds.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
resp->num is the number of tokens in resp->tok[]. It gets set in
response_parse(). So if n == resp->num then we're reading beyond the
end of the data.
Fixes: 455a7b238cd6 ("block: Add Sed-opal library")
Reviewed-by: Scott Bauer <scott.bauer@intel.com>
Tested-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If rq_state == ARRAY_SIZE() then we read one element beyond the end of
the blk_mq_rq_state_name_array[] array.
Fixes: ec6dcf63c55c ("blk-mq-debugfs: Show more request state information")
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Controllers that are not yet enabled should not really enforce keep alive
timeouts, but we still want to track a timeout and cleanup in case a host
died before it enabled the controller. Hence, simply reset the keep
alive timer when the controller is enabled.
Suggested-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
That is user argument, and theoretically controller limits can change
over time (over reconnects/resets). Instead, use the sqsize controller
attribute to check queue depth boundaries and use it to the tagset
allocation.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The race is between completing the request at error recovery work and
rdma completions. If we cancel the request before getting the good
rdma completion we get a NULL deref of the request MR at
nvme_rdma_process_nvme_rsp().
When Canceling the request we return its mr to the mr pool (set mr to
NULL) and also unmap its data. Canceling the requests while the rdma
queues are active is not safe. Because rdma queues are active and we
get good rdma completions that can use the mr pointer which may be NULL.
Completing the request too soon may lead also to performing DMA to/from
user buffers which might have been already unmapped.
The commit fixes the race by draining the QP before starting the abort
commands mechanism.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If nvme_rdma_configure_admin_queue fails before we allocated
the async event buffer, we will falsly free it because
nvme_rdma_free_queue is freeing it. Fix it by allocating the buffer right
after nvme_rdma_alloc_queue and free it right before nvme_rdma_queue_free
to maintain orderly reverse cleanup sequence.
Reported-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
controller
Failures after nvme_init_ctrl will defer resource cleanups to .free_ctrl
when the reference is released, hence we should not free the controller
queues for these failures.
Fix that by moving controller queues allocation before controller
initialization and correctly freeing them for failures before
initialization and skip them for failures after initialization.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit 0ba99ca4838b ("block: Add warning for bi_next not NULL in
bio_endio()") breaks the dm driver. end_clone_bio() detects whether
or not a bio is the last bio associated with a request by checking
the .bi_next field. Commit 0ba99ca4838b clears that field before
end_clone_bio() has had a chance to inspect that field. Hence revert
commit 0ba99ca4838b.
This patch avoids that KASAN reports the following complaint when
running the srp-test software (srp-test/run_tests -c -d -r 10 -t 02-mq):
==================================================================
BUG: KASAN: use-after-free in bio_advance+0x11b/0x1d0
Read of size 4 at addr ffff8801300e06d0 by task ksoftirqd/0/9
CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 4.18.0-rc1-dbg+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0xa4/0xf5
print_address_description+0x6f/0x270
kasan_report+0x241/0x360
__asan_load4+0x78/0x80
bio_advance+0x11b/0x1d0
blk_update_request+0xa7/0x5b0
scsi_end_request+0x56/0x320 [scsi_mod]
scsi_io_completion+0x7d6/0xb20 [scsi_mod]
scsi_finish_command+0x1c0/0x280 [scsi_mod]
scsi_softirq_done+0x19a/0x230 [scsi_mod]
blk_mq_complete_request+0x160/0x240
scsi_mq_done+0x50/0x1a0 [scsi_mod]
srp_recv_done+0x515/0x1330 [ib_srp]
__ib_process_cq+0xa0/0xf0 [ib_core]
ib_poll_handler+0x38/0xa0 [ib_core]
irq_poll_softirq+0xe8/0x1f0
__do_softirq+0x128/0x60d
run_ksoftirqd+0x3f/0x60
smpboot_thread_fn+0x352/0x460
kthread+0x1c1/0x1e0
ret_from_fork+0x24/0x30
Allocated by task 1918:
save_stack+0x43/0xd0
kasan_kmalloc+0xad/0xe0
kasan_slab_alloc+0x11/0x20
kmem_cache_alloc+0xfe/0x350
mempool_alloc_slab+0x15/0x20
mempool_alloc+0xfb/0x270
bio_alloc_bioset+0x244/0x350
submit_bh_wbc+0x9c/0x2f0
__block_write_full_page+0x299/0x5a0
block_write_full_page+0x16b/0x180
blkdev_writepage+0x18/0x20
__writepage+0x42/0x80
write_cache_pages+0x376/0x8a0
generic_writepages+0xbe/0x110
blkdev_writepages+0xe/0x10
do_writepages+0x9b/0x180
__filemap_fdatawrite_range+0x178/0x1c0
file_write_and_wait_range+0x59/0xc0
blkdev_fsync+0x46/0x80
vfs_fsync_range+0x66/0x100
do_fsync+0x3d/0x70
__x64_sys_fsync+0x21/0x30
do_syscall_64+0x77/0x230
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 9:
save_stack+0x43/0xd0
__kasan_slab_free+0x137/0x190
kasan_slab_free+0xe/0x10
kmem_cache_free+0xd3/0x380
mempool_free_slab+0x17/0x20
mempool_free+0x63/0x160
bio_free+0x81/0xa0
bio_put+0x59/0x60
end_bio_bh_io_sync+0x5d/0x70
bio_endio+0x1a7/0x360
blk_update_request+0xd0/0x5b0
end_clone_bio+0xa3/0xd0 [dm_mod]
bio_endio+0x1a7/0x360
blk_update_request+0xd0/0x5b0
scsi_end_request+0x56/0x320 [scsi_mod]
scsi_io_completion+0x7d6/0xb20 [scsi_mod]
scsi_finish_command+0x1c0/0x280 [scsi_mod]
scsi_softirq_done+0x19a/0x230 [scsi_mod]
blk_mq_complete_request+0x160/0x240
scsi_mq_done+0x50/0x1a0 [scsi_mod]
srp_recv_done+0x515/0x1330 [ib_srp]
__ib_process_cq+0xa0/0xf0 [ib_core]
ib_poll_handler+0x38/0xa0 [ib_core]
irq_poll_softirq+0xe8/0x1f0
__do_softirq+0x128/0x60d
The buggy address belongs to the object at ffff8801300e0640
which belongs to the cache bio-0 of size 200
The buggy address is located 144 bytes inside of
200-byte region [ffff8801300e0640, ffff8801300e0708)
The buggy address belongs to the page:
page:ffffea0004c03800 count:1 mapcount:0 mapping:ffff88015a563a00 index:0x0 compound_mapcount: 0
flags: 0x8000000000008100(slab|head)
raw: 8000000000008100 dead000000000100 dead000000000200 ffff88015a563a00
raw: 0000000000000000 0000000000330033 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801300e0580: fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc
ffff8801300e0600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
>ffff8801300e0680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8801300e0700: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8801300e0780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Fixes: 0ba99ca4838b ("block: Add warning for bi_next not NULL in bio_endio()")
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_complete_request can only be called for blk-mq drivers, but when
removing the BLK_EH_HANDLED return value, two legacy request timeout
methods incorrectly got switched to call blk_mq_complete_request.
Call __blk_complete_request instead to reinstance the previous behavior.
For that __blk_complete_request needs to be exported.
Fixes: 1fc2b62e ("scsi_transport_fc: complete requests from ->timeout")
Fixes: 0df0bb08 ("null_blk: complete requests from ->timeout")
Reported-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The existing implementation allows races between bsg_unregister and
bsg_open paths. bsg_unregister and request_queue cleanup and deletion
may start and complete right after bsg_get_device (in bsg_open path)
retrieves bsg_class_device and releases the mutex. Then bsg_open path
touches freed memory of bsg_class_device and request_queue.
One possible fix is to hold the mutex all the way through bsg_get_device
instead of releasing it after bsg_class_device retrieval.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-Off-By: Anatoliy Glagolev <glagolig@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This function is entirely unused, so remove it and the tag_queue_busy
member of struct request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull NVMe fixes from Christoph:
"Fix various little regressions introduced in this merge window, plus
a rework of the fibre channel connect and reconnect path to share the
code instead of having separate sets of bugs. Last but not least a
trivial trace point addition from Hannes."
* 'nvme-4.18' of git://git.infradead.org/nvme:
nvme-fabrics: fix and refine state checks in __nvmf_check_ready
nvme-fabrics: handle the admin-only case properly in nvmf_check_ready
nvme-fabrics: refactor queue ready check
blk-mq: remove blk_mq_tagset_iter
nvme: remove nvme_reinit_tagset
nvme-fc: fix nulling of queue data on reconnect
nvme-fc: remove reinit_request routine
nvme-fc: change controllers first connect to use reconnect path
nvme: don't rely on the changed namespace list log
nvmet: free smart-log buffer after use
nvme-rdma: fix error flow during mapping request data
nvme: add bio remapping tracepoint
nvme: fix NULL pointer dereference in nvme_init_subsystem
|
|
- make sure we only allow internally generates commands in any non-live
state
- only allow connect commands on non-live queues when actually in the
new or connecting states
- treat all other non-live, non-dead states the same as a default
cach-all
This fixes a regression where we could not shutdown a controller
orderly as we didn't allow the internal generated Property Set
command, and also ensures we don't accidentally let a Connect command
through in the wrong state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
|
|
In the ADMIN_ONLY state we don't have any I/O queues, but we should accept
all admin commands without further checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
|
|
Move the is_connected check to the fibre channel transport, as it has no
meaning for other transports. To facilitate this split out a new
nvmf_fail_nonready_command helper that is called by the transport when
it is asked to handle a command on a queue that is not ready.
Also avoid a function call for the queue live fast path by inlining
the check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
|
|
Unused now that nvme stopped using it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
|
|
Unused now that all transports stopped using it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
|
|
The reconnect path is calling the init routines to clear a queue
structure. But the queue structure has state that perhaps needs
to persist as long as the controller is live.
Remove the nvme_fc_init_queue() calls on reconnect.
The nvme_fc_free_queue() calls will clear state bits and reset
any relevant queue state for a new connection.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The reinit_request routine is not necessary. Remove support for the
op callback.
As all that nvme_reinit_tagset() does is itterate and call the
reinit routine, it too has no purpose. Remove the call.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
